blob: 863d3856718aa71730363d181d2f4c187d31523b [file] [log] [blame]
What: /sys/bus/iio/devices/deviceX/inY-inZ_balance_switch_en
KernelVersion: 3.0.0
Writing 1 enables the cell balance output switch corresponding
to input Y. Writing 0 disables it. If the inY-inZ_balance_timer
is set to a none zero value, the corresponding switch will
enable for the programmed amount of time, before it
automatically disables.
What: /sys/bus/iio/devices/deviceX/inY-inZ_balance_timer
KernelVersion: 3.0.0
The inY-inZ_balance_timer file allows the user to program
individual times for each cell balance output. The AD7280A
allows the user to set the timer to a value from 0 minutes to
36.9 minutes. The resolution of the timer is 71.5 sec.
The value written is the on-time in milliseconds. When the
timer value is set 0, the timer is disabled. The cell balance
outputs are controlled only by inY-inZ_balance_switch_en.