blob: cb5d39794800fdc0141c5e69bd63e985862e386d [file] [log] [blame]
#ifndef _ASM_MICROBLAZE_PCI_BRIDGE_H
#define _ASM_MICROBLAZE_PCI_BRIDGE_H
#ifdef __KERNEL__
/*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/pci.h>
#include <linux/list.h>
#include <linux/ioport.h>
struct device_node;
#ifdef CONFIG_PCI
extern struct list_head hose_list;
extern int pcibios_vaddr_is_ioport(void __iomem *address);
#else
static inline int pcibios_vaddr_is_ioport(void __iomem *address)
{
return 0;
}
#endif
/*
* Structure of a PCI controller (host bridge)
*/
struct pci_controller {
struct pci_bus *bus;
char is_dynamic;
struct device_node *dn;
struct list_head list_node;
struct device *parent;
int first_busno;
int last_busno;
int self_busno;
void __iomem *io_base_virt;
resource_size_t io_base_phys;
resource_size_t pci_io_size;
/* Some machines (PReP) have a non 1:1 mapping of
* the PCI memory space in the CPU bus space
*/
resource_size_t pci_mem_offset;
/* Some machines have a special region to forward the ISA
* "memory" cycles such as VGA memory regions. Left to 0
* if unsupported
*/
resource_size_t isa_mem_phys;
resource_size_t isa_mem_size;
struct pci_ops *ops;
unsigned int __iomem *cfg_addr;
void __iomem *cfg_data;
/*
* Used for variants of PCI indirect handling and possible quirks:
* SET_CFG_TYPE - used on 4xx or any PHB that does explicit type0/1
* EXT_REG - provides access to PCI-e extended registers
* SURPRESS_PRIMARY_BUS - we suppress the setting of PCI_PRIMARY_BUS
* on Freescale PCI-e controllers since they used the PCI_PRIMARY_BUS
* to determine which bus number to match on when generating type0
* config cycles
* NO_PCIE_LINK - the Freescale PCI-e controllers have issues with
* hanging if we don't have link and try to do config cycles to
* anything but the PHB. Only allow talking to the PHB if this is
* set.
* BIG_ENDIAN - cfg_addr is a big endian register
* BROKEN_MRM - the 440EPx/GRx chips have an errata that causes hangs
* on the PLB4. Effectively disable MRM commands by setting this.
*/
#define INDIRECT_TYPE_SET_CFG_TYPE 0x00000001
#define INDIRECT_TYPE_EXT_REG 0x00000002
#define INDIRECT_TYPE_SURPRESS_PRIMARY_BUS 0x00000004
#define INDIRECT_TYPE_NO_PCIE_LINK 0x00000008
#define INDIRECT_TYPE_BIG_ENDIAN 0x00000010
#define INDIRECT_TYPE_BROKEN_MRM 0x00000020
u32 indirect_type;
/* Currently, we limit ourselves to 1 IO range and 3 mem
* ranges since the common pci_bus structure can't handle more
*/
struct resource io_resource;
struct resource mem_resources[3];
int global_number; /* PCI domain number */
};
#ifdef CONFIG_PCI
static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus)
{
return bus->sysdata;
}
static inline int isa_vaddr_is_ioport(void __iomem *address)
{
/* No specific ISA handling on ppc32 at this stage, it
* all goes through PCI
*/
return 0;
}
#endif /* CONFIG_PCI */
/* These are used for config access before all the PCI probing
has been done. */
extern int early_read_config_byte(struct pci_controller *hose, int bus,
int dev_fn, int where, u8 *val);
extern int early_read_config_word(struct pci_controller *hose, int bus,
int dev_fn, int where, u16 *val);
extern int early_read_config_dword(struct pci_controller *hose, int bus,
int dev_fn, int where, u32 *val);
extern int early_write_config_byte(struct pci_controller *hose, int bus,
int dev_fn, int where, u8 val);
extern int early_write_config_word(struct pci_controller *hose, int bus,
int dev_fn, int where, u16 val);
extern int early_write_config_dword(struct pci_controller *hose, int bus,
int dev_fn, int where, u32 val);
extern int early_find_capability(struct pci_controller *hose, int bus,
int dev_fn, int cap);
extern void setup_indirect_pci(struct pci_controller *hose,
resource_size_t cfg_addr,
resource_size_t cfg_data, u32 flags);
/* Get the PCI host controller for an OF device */
extern struct pci_controller *pci_find_hose_for_OF_device(
struct device_node *node);
/* Fill up host controller resources from the OF node */
extern void pci_process_bridge_OF_ranges(struct pci_controller *hose,
struct device_node *dev, int primary);
/* Allocate & free a PCI host bridge structure */
extern struct pci_controller *pcibios_alloc_controller(struct device_node *dev);
extern void pcibios_free_controller(struct pci_controller *phb);
#endif /* __KERNEL__ */
#endif /* _ASM_MICROBLAZE_PCI_BRIDGE_H */