| /* |
| * This file is part of wl1271 |
| * |
| * Copyright (C) 2009-2010 Nokia Corporation |
| * |
| * Contact: Luciano Coelho <luciano.coelho@nokia.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA |
| * 02110-1301 USA |
| * |
| */ |
| |
| #ifndef __SCAN_H__ |
| #define __SCAN_H__ |
| |
| #include "wlcore.h" |
| |
| int wlcore_scan(struct wl1271 *wl, struct ieee80211_vif *vif, |
| const u8 *ssid, size_t ssid_len, |
| struct cfg80211_scan_request *req); |
| int wl1271_scan_build_probe_req(struct wl1271 *wl, |
| const u8 *ssid, size_t ssid_len, |
| const u8 *ie, size_t ie_len, u8 band); |
| void wl1271_scan_stm(struct wl1271 *wl, struct wl12xx_vif *wlvif); |
| void wl1271_scan_complete_work(struct work_struct *work); |
| int wl1271_scan_sched_scan_config(struct wl1271 *wl, |
| struct wl12xx_vif *wlvif, |
| struct cfg80211_sched_scan_request *req, |
| struct ieee80211_scan_ies *ies); |
| int wl1271_scan_sched_scan_start(struct wl1271 *wl, struct wl12xx_vif *wlvif); |
| void wlcore_scan_sched_scan_results(struct wl1271 *wl); |
| |
| #define WL1271_SCAN_MAX_CHANNELS 24 |
| #define WL1271_SCAN_DEFAULT_TAG 1 |
| #define WL1271_SCAN_CURRENT_TX_PWR 0 |
| #define WL1271_SCAN_OPT_ACTIVE 0 |
| #define WL1271_SCAN_OPT_PASSIVE 1 |
| #define WL1271_SCAN_OPT_SPLIT_SCAN 2 |
| #define WL1271_SCAN_OPT_PRIORITY_HIGH 4 |
| /* scan even if we fail to enter psm */ |
| #define WL1271_SCAN_OPT_FORCE 8 |
| #define WL1271_SCAN_BAND_2_4_GHZ 0 |
| #define WL1271_SCAN_BAND_5_GHZ 1 |
| |
| #define WL1271_SCAN_TIMEOUT 30000 /* msec */ |
| |
| enum { |
| WL1271_SCAN_STATE_IDLE, |
| WL1271_SCAN_STATE_2GHZ_ACTIVE, |
| WL1271_SCAN_STATE_2GHZ_PASSIVE, |
| WL1271_SCAN_STATE_5GHZ_ACTIVE, |
| WL1271_SCAN_STATE_5GHZ_PASSIVE, |
| WL1271_SCAN_STATE_DONE |
| }; |
| |
| struct wl1271_cmd_trigger_scan_to { |
| struct wl1271_cmd_header header; |
| |
| __le32 timeout; |
| } __packed; |
| |
| #define MAX_CHANNELS_2GHZ 14 |
| #define MAX_CHANNELS_4GHZ 4 |
| |
| /* |
| * This max value here is used only for the struct definition of |
| * wlcore_scan_channels. This struct is used by both 12xx |
| * and 18xx (which have different max 5ghz channels value). |
| * In order to make sure this is large enough, just use the |
| * max possible 5ghz channels. |
| */ |
| #define MAX_CHANNELS_5GHZ 42 |
| |
| #define SCAN_MAX_CYCLE_INTERVALS 16 |
| |
| /* The FW intervals can take up to 16 entries. |
| * The 1st entry isn't used (scan is immediate). The last |
| * entry should be used for the long_interval |
| */ |
| #define SCAN_MAX_SHORT_INTERVALS (SCAN_MAX_CYCLE_INTERVALS - 2) |
| #define SCAN_MAX_BANDS 3 |
| |
| enum { |
| SCAN_SSID_FILTER_ANY = 0, |
| SCAN_SSID_FILTER_SPECIFIC = 1, |
| SCAN_SSID_FILTER_LIST = 2, |
| SCAN_SSID_FILTER_DISABLED = 3 |
| }; |
| |
| enum { |
| SCAN_BSS_TYPE_INDEPENDENT, |
| SCAN_BSS_TYPE_INFRASTRUCTURE, |
| SCAN_BSS_TYPE_ANY, |
| }; |
| |
| #define SCAN_CHANNEL_FLAGS_DFS BIT(0) /* channel is passive until an |
| activity is detected on it */ |
| #define SCAN_CHANNEL_FLAGS_DFS_ENABLED BIT(1) |
| |
| struct conn_scan_ch_params { |
| __le16 min_duration; |
| __le16 max_duration; |
| __le16 passive_duration; |
| |
| u8 channel; |
| u8 tx_power_att; |
| |
| /* bit 0: DFS channel; bit 1: DFS enabled */ |
| u8 flags; |
| |
| u8 padding[3]; |
| } __packed; |
| |
| #define SCHED_SCAN_MAX_SSIDS 16 |
| |
| enum { |
| SCAN_SSID_TYPE_PUBLIC = 0, |
| SCAN_SSID_TYPE_HIDDEN = 1, |
| }; |
| |
| struct wl1271_ssid { |
| u8 type; |
| u8 len; |
| u8 ssid[IEEE80211_MAX_SSID_LEN]; |
| /* u8 padding[2]; */ |
| } __packed; |
| |
| struct wl1271_cmd_sched_scan_ssid_list { |
| struct wl1271_cmd_header header; |
| |
| u8 n_ssids; |
| struct wl1271_ssid ssids[SCHED_SCAN_MAX_SSIDS]; |
| u8 role_id; |
| u8 padding[2]; |
| } __packed; |
| |
| struct wlcore_scan_channels { |
| u8 passive[SCAN_MAX_BANDS]; /* number of passive scan channels */ |
| u8 active[SCAN_MAX_BANDS]; /* number of active scan channels */ |
| u8 dfs; /* number of dfs channels in 5ghz */ |
| u8 passive_active; /* number of passive before active channels 2.4ghz */ |
| |
| struct conn_scan_ch_params channels_2[MAX_CHANNELS_2GHZ]; |
| struct conn_scan_ch_params channels_5[MAX_CHANNELS_5GHZ]; |
| struct conn_scan_ch_params channels_4[MAX_CHANNELS_4GHZ]; |
| }; |
| |
| enum { |
| SCAN_TYPE_SEARCH = 0, |
| SCAN_TYPE_PERIODIC = 1, |
| SCAN_TYPE_TRACKING = 2, |
| }; |
| |
| bool |
| wlcore_set_scan_chan_params(struct wl1271 *wl, |
| struct wlcore_scan_channels *cfg, |
| struct ieee80211_channel *channels[], |
| u32 n_channels, |
| u32 n_ssids, |
| int scan_type); |
| |
| int |
| wlcore_scan_sched_scan_ssid_list(struct wl1271 *wl, |
| struct wl12xx_vif *wlvif, |
| struct cfg80211_sched_scan_request *req); |
| |
| #endif /* __WL1271_SCAN_H__ */ |