diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index c802a90..b7d8333 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -276,7 +276,6 @@
 image-$(CONFIG_TQM8555)			+= cuImage.tqm8555
 image-$(CONFIG_TQM8560)			+= cuImage.tqm8560
 image-$(CONFIG_SBC8548)			+= cuImage.sbc8548
-image-$(CONFIG_SBC8560)			+= cuImage.sbc8560
 image-$(CONFIG_KSI8560)			+= cuImage.ksi8560
 
 # Board ports in arch/powerpc/platform/embedded6xx/Kconfig
diff --git a/arch/powerpc/boot/dts/sbc8560.dts b/arch/powerpc/boot/dts/sbc8560.dts
deleted file mode 100644
index 72078eb..0000000
--- a/arch/powerpc/boot/dts/sbc8560.dts
+++ /dev/null
@@ -1,406 +0,0 @@
-/*
- * SBC8560 Device Tree Source
- *
- * Copyright 2007 Wind River Systems Inc.
- *
- * Paul Gortmaker (see MAINTAINERS for contact information)
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-
-/ {
-	model = "SBC8560";
-	compatible = "SBC8560";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		ethernet2 = &enet2;
-		ethernet3 = &enet3;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8560@0 {
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <0x20>;	// 32 bytes
-			i-cache-line-size = <0x20>;	// 32 bytes
-			d-cache-size = <0x8000>;	// L1, 32K
-			i-cache-size = <0x8000>;	// L1, 32K
-			timebase-frequency = <0>;	// From uboot
-			bus-frequency = <0>;
-			clock-frequency = <0>;
-			next-level-cache = <&L2>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;
-	};
-
-	soc@ff700000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		ranges = <0x0 0xff700000 0x00100000>;
-		clock-frequency = <0>;
-
-		ecm-law@0 {
-			compatible = "fsl,ecm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <8>;
-		};
-
-		ecm@1000 {
-			compatible = "fsl,mpc8560-ecm", "fsl,ecm";
-			reg = <0x1000 0x1000>;
-			interrupts = <17 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		memory-controller@2000 {
-			compatible = "fsl,mpc8560-memory-controller";
-			reg = <0x2000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <0x12 0x2>;
-		};
-
-		L2: l2-cache-controller@20000 {
-			compatible = "fsl,mpc8560-l2-cache-controller";
-			reg = <0x20000 0x1000>;
-			cache-line-size = <0x20>;	// 32 bytes
-			cache-size = <0x40000>;		// L2, 256K
-			interrupt-parent = <&mpic>;
-			interrupts = <0x10 0x2>;
-		};
-
-		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <0x2b 0x2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
-
-		i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <0x2b 0x2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
-
-		dma@21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma";
-			reg = <0x21300 0x4>;
-			ranges = <0x0 0x21100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8560-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <20 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8560-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <21 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8560-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <22 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8560-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <23 2>;
-			};
-		};
-
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy0>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-				phy0: ethernet-phy@19 {
-					interrupt-parent = <&mpic>;
-					interrupts = <0x6 0x1>;
-					reg = <0x19>;
-					device_type = "ethernet-phy";
-				};
-				phy1: ethernet-phy@1a {
-					interrupt-parent = <&mpic>;
-					interrupts = <0x7 0x1>;
-					reg = <0x1a>;
-					device_type = "ethernet-phy";
-				};
-				phy2: ethernet-phy@1b {
-					interrupt-parent = <&mpic>;
-					interrupts = <0x8 0x1>;
-					reg = <0x1b>;
-					device_type = "ethernet-phy";
-				};
-				phy3: ethernet-phy@1c {
-					interrupt-parent = <&mpic>;
-					interrupts = <0x8 0x1>;
-					reg = <0x1c>;
-					device_type = "ethernet-phy";
-				};
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet1: ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x25000 0x1000>;
-			ranges = <0x0 0x25000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi1>;
-			phy-handle = <&phy1>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi1: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		mpic: pic@40000 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			compatible = "chrp,open-pic";
-			reg = <0x40000 0x40000>;
-			device_type = "open-pic";
-		};
-
-		cpm@919c0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8560-cpm", "fsl,cpm2";
-			reg = <0x919c0 0x30>;
-			ranges;
-
-			muram@80000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0x0 0x80000 0x10000>;
-
-				data@0 {
-					compatible = "fsl,cpm-muram-data";
-					reg = <0x0 0x4000 0x9000 0x2000>;
-				};
-			};
-
-			brg@919f0 {
-				compatible = "fsl,mpc8560-brg",
-				             "fsl,cpm2-brg",
-				             "fsl,cpm-brg";
-				reg = <0x919f0 0x10 0x915f0 0x10>;
-				clock-frequency = <165000000>;
-			};
-
-			cpmpic: pic@90c00 {
-				interrupt-controller;
-				#address-cells = <0>;
-				#interrupt-cells = <2>;
-				interrupts = <0x2e 0x2>;
-				interrupt-parent = <&mpic>;
-				reg = <0x90c00 0x80>;
-				compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic";
-			};
-
-			enet2: ethernet@91320 {
-				device_type = "network";
-				compatible = "fsl,mpc8560-fcc-enet",
-				             "fsl,cpm2-fcc-enet";
-				reg = <0x91320 0x20 0x88500 0x100 0x913b0 0x1>;
-				local-mac-address = [ 00 00 00 00 00 00 ];
-				fsl,cpm-command = <0x16200300>;
-				interrupts = <0x21 0x8>;
-				interrupt-parent = <&cpmpic>;
-				phy-handle = <&phy2>;
-			};
-
-			enet3: ethernet@91340 {
-				device_type = "network";
-				compatible = "fsl,mpc8560-fcc-enet",
-				             "fsl,cpm2-fcc-enet";
-				reg = <0x91340 0x20 0x88600 0x100 0x913d0 0x1>;
-				local-mac-address = [ 00 00 00 00 00 00 ];
-				fsl,cpm-command = <0x1a400300>;
-				interrupts = <0x22 0x8>;
-				interrupt-parent = <&cpmpic>;
-				phy-handle = <&phy3>;
-			};
-		};
-
-		global-utilities@e0000 {
-			compatible = "fsl,mpc8560-guts";
-			reg = <0xe0000 0x1000>;
-		};
-	};
-
-	pci0: pci@ff708000 {
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
-		device_type = "pci";
-		reg = <0xff708000 0x1000>;
-		clock-frequency = <66666666>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-
-			/* IDSEL 0x02 */
-			0x1000 0x0 0x0 0x1 &mpic 0x2 0x1
-			0x1000 0x0 0x0 0x2 &mpic 0x3 0x1
-			0x1000 0x0 0x0 0x3 &mpic 0x4 0x1
-			0x1000 0x0 0x0 0x4 &mpic 0x5 0x1>;
-
-		interrupt-parent = <&mpic>;
-		interrupts = <0x18 0x2>;
-		bus-range = <0x0 0x0>;
-		ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000
-			  0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
-	};
-
-	localbus@ff705000 {
-		compatible = "fsl,mpc8560-localbus", "simple-bus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		reg = <0xff705000 0x100>;	// BRx, ORx, etc.
-
-		ranges = <
-			0x0 0x0 0xff800000 0x0800000	// 8MB boot flash
-			0x1 0x0 0xe4000000 0x4000000	// 64MB flash
-			0x3 0x0 0x20000000 0x4000000	// 64MB SDRAM
-			0x4 0x0 0x24000000 0x4000000	// 64MB SDRAM
-			0x5 0x0 0xfc000000 0x0c00000	// EPLD
-			0x6 0x0 0xe0000000 0x4000000	// 64MB flash
-			0x7 0x0 0x80000000 0x0200000	// ATM1,2
-		>;
-
-		epld@5,0 {
-			compatible = "wrs,epld-localbus";
-			#address-cells = <2>;
-			#size-cells = <1>;
-			reg = <0x5 0x0 0xc00000>;
-			ranges = <
-				0x0 0x0 0x5 0x000000 0x1fff	// LED disp.
-				0x1 0x0 0x5 0x100000 0x1fff	// switches
-				0x2 0x0 0x5 0x200000 0x1fff	// ID reg.
-				0x3 0x0 0x5 0x300000 0x1fff	// status reg.
-				0x4 0x0 0x5 0x400000 0x1fff	// reset reg.
-				0x5 0x0 0x5 0x500000 0x1fff	// Wind port
-				0x7 0x0 0x5 0x700000 0x1fff	// UART #1
-				0x8 0x0 0x5 0x800000 0x1fff	// UART #2
-				0x9 0x0 0x5 0x900000 0x1fff	// RTC
-				0xb 0x0 0x5 0xb00000 0x1fff	// EEPROM
-			>;
-
-			bidr@2,0 {
-				compatible = "wrs,sbc8560-bidr";
-				reg = <0x2 0x0 0x10>;
-			};
-
-			bcsr@3,0 {
-				compatible = "wrs,sbc8560-bcsr";
-				reg = <0x3 0x0 0x10>;
-			};
-
-			brstcr@4,0 {
-				compatible = "wrs,sbc8560-brstcr";
-				reg = <0x4 0x0 0x10>;
-			};
-
-			serial0: serial@7,0 {
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0x7 0x0 0x100>;
-				clock-frequency = <1843200>;
-				interrupts = <0x9 0x2>;
-				interrupt-parent = <&mpic>;
-			};
-
-			serial1: serial@8,0 {
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0x8 0x0 0x100>;
-				clock-frequency = <1843200>;
-				interrupts = <0xa 0x2>;
-				interrupt-parent = <&mpic>;
-			};
-
-			rtc@9,0 {
-				compatible = "m48t59";
-				reg = <0x9 0x0 0x1fff>;
-			};
-		};
-	};
-};
diff --git a/arch/powerpc/configs/85xx/sbc8560_defconfig b/arch/powerpc/configs/85xx/sbc8560_defconfig
deleted file mode 100644
index f7fdb03..0000000
--- a/arch/powerpc/configs/85xx/sbc8560_defconfig
+++ /dev/null
@@ -1,65 +0,0 @@
-CONFIG_PPC_85xx=y
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
-CONFIG_SLAB=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_SBC8560=y
-CONFIG_BINFMT_MISC=y
-CONFIG_SPARSE_IRQ=y
-# CONFIG_SECCOMP is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FW_LOADER is not set
-CONFIG_PROC_DEVICETREE=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_NETDEVICES=y
-CONFIG_BROADCOM_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_GIANFAR=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_HW_RANDOM is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_M48T59=y
-CONFIG_INOTIFY=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_MSDOS_PARTITION is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_PPC_EARLY_DEBUG=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index f000d81..b3370be 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -175,12 +175,6 @@
 	help
 	  This option enables support for the Wind River SBC8548 board
 
-config SBC8560
-	bool "Wind River SBC8560"
-	select DEFAULT_UIMAGE
-	help
-	  This option enables support for the Wind River SBC8560 board
-
 config GE_IMP3A
 	bool "GE Intelligent Platforms IMP3A"
 	select DEFAULT_UIMAGE
diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
index 2125d4c..50280cc 100644
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -22,7 +22,6 @@
 obj-$(CONFIG_P5020_DS)    += p5020_ds.o corenet_ds.o
 obj-$(CONFIG_STX_GP3)	  += stx_gp3.o
 obj-$(CONFIG_TQM85xx)	  += tqm85xx.o
-obj-$(CONFIG_SBC8560)     += sbc8560.o
 obj-$(CONFIG_SBC8548)     += sbc8548.o
 obj-$(CONFIG_SOCRATES)    += socrates.o socrates_fpga_pic.o
 obj-$(CONFIG_KSI8560)	  += ksi8560.o
diff --git a/arch/powerpc/platforms/85xx/sbc8560.c b/arch/powerpc/platforms/85xx/sbc8560.c
deleted file mode 100644
index b1be632..0000000
--- a/arch/powerpc/platforms/85xx/sbc8560.c
+++ /dev/null
@@ -1,254 +0,0 @@
-/*
- * Wind River SBC8560 setup and early boot code.
- *
- * Copyright 2007 Wind River Systems Inc.
- *
- * By Paul Gortmaker (see MAINTAINERS for contact information)
- *
- * Based largely on the MPC8560ADS support - Copyright 2005 Freescale Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/of_platform.h>
-
-#include <asm/time.h>
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-#include <asm/mpic.h>
-#include <mm/mmu_decl.h>
-#include <asm/udbg.h>
-
-#include <sysdev/fsl_soc.h>
-#include <sysdev/fsl_pci.h>
-
-#include "mpc85xx.h"
-
-#ifdef CONFIG_CPM2
-#include <asm/cpm2.h>
-#include <sysdev/cpm2_pic.h>
-#endif
-
-static void __init sbc8560_pic_init(void)
-{
-	struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN,
-			0, 256, " OpenPIC  ");
-	BUG_ON(mpic == NULL);
-	mpic_init(mpic);
-
-	mpc85xx_cpm2_pic_init();
-}
-
-/*
- * Setup the architecture
- */
-#ifdef CONFIG_CPM2
-struct cpm_pin {
-	int port, pin, flags;
-};
-
-static const struct cpm_pin sbc8560_pins[] = {
-	/* SCC1 */
-	{3, 29, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
-	{3, 30, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
-	{3, 31, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-
-	/* SCC2 */
-	{3, 26, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
-	{3, 27, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
-	{3, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-
-	/* FCC2 */
-	{1, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-	{1, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-	{1, 20, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-	{1, 21, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-	{1, 22, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
-	{1, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
-	{1, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
-	{1, 25, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
-	{1, 26, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-	{1, 27, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-	{1, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-	{1, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
-	{1, 30, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-	{1, 31, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
-	{2, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK14 */
-	{2, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK13 */
-
-	/* FCC3 */
-	{1, 4, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
-	{1, 5, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
-	{1, 6, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
-	{1, 7, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
-	{1, 8, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-	{1, 9, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-	{1, 10, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-	{1, 11, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-	{1, 12, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-	{1, 13, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-	{1, 14, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
-	{1, 15, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
-	{1, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-	{1, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-	{2, 16, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* CLK16 */
-	{2, 17, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* CLK15 */
-};
-
-static void __init init_ioports(void)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(sbc8560_pins); i++) {
-		const struct cpm_pin *pin = &sbc8560_pins[i];
-		cpm2_set_pin(pin->port, pin->pin, pin->flags);
-	}
-
-	cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_RX);
-	cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_TX);
-	cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_RX);
-	cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_TX);
-	cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK13, CPM_CLK_RX);
-	cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK14, CPM_CLK_TX);
-	cpm2_clk_setup(CPM_CLK_FCC3, CPM_CLK15, CPM_CLK_RX);
-	cpm2_clk_setup(CPM_CLK_FCC3, CPM_CLK16, CPM_CLK_TX);
-}
-#endif
-
-static void __init sbc8560_setup_arch(void)
-{
-#ifdef CONFIG_PCI
-	struct device_node *np;
-#endif
-
-	if (ppc_md.progress)
-		ppc_md.progress("sbc8560_setup_arch()", 0);
-
-#ifdef CONFIG_CPM2
-	cpm2_reset();
-	init_ioports();
-#endif
-
-#ifdef CONFIG_PCI
-	for_each_compatible_node(np, "pci", "fsl,mpc8540-pci")
-		fsl_add_bridge(np, 1);
-#endif
-}
-
-static void sbc8560_show_cpuinfo(struct seq_file *m)
-{
-	uint pvid, svid, phid1;
-
-	pvid = mfspr(SPRN_PVR);
-	svid = mfspr(SPRN_SVR);
-
-	seq_printf(m, "Vendor\t\t: Wind River\n");
-	seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
-	seq_printf(m, "SVR\t\t: 0x%x\n", svid);
-
-	/* Display cpu Pll setting */
-	phid1 = mfspr(SPRN_HID1);
-	seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
-}
-
-machine_device_initcall(sbc8560, mpc85xx_common_publish_devices);
-
-/*
- * Called very early, device-tree isn't unflattened
- */
-static int __init sbc8560_probe(void)
-{
-        unsigned long root = of_get_flat_dt_root();
-
-        return of_flat_dt_is_compatible(root, "SBC8560");
-}
-
-#ifdef CONFIG_RTC_DRV_M48T59
-static int __init sbc8560_rtc_init(void)
-{
-	struct device_node *np;
-	struct resource res;
-	struct platform_device *rtc_dev;
-
-	np = of_find_compatible_node(NULL, NULL, "m48t59");
-	if (np == NULL) {
-		printk("No RTC in DTB. Has it been eaten by wild dogs?\n");
-		return -ENODEV;
-	}
-
-	of_address_to_resource(np, 0, &res);
-	of_node_put(np);
-
-	printk("Found RTC (m48t59) at i/o 0x%x\n", res.start);
-
-	rtc_dev = platform_device_register_simple("rtc-m48t59", 0, &res, 1);
-
-	if (IS_ERR(rtc_dev)) {
-		printk("Registering sbc8560 RTC device failed\n");
-		return PTR_ERR(rtc_dev);
-	}
-
-	return 0;
-}
-
-arch_initcall(sbc8560_rtc_init);
-
-#endif	/* M48T59 */
-
-static __u8 __iomem *brstcr;
-
-static int __init sbc8560_bdrstcr_init(void)
-{
-	struct device_node *np;
-	struct resource res;
-
-	np = of_find_compatible_node(NULL, NULL, "wrs,sbc8560-brstcr");
-	if (np == NULL) {
-		printk(KERN_WARNING "sbc8560: No board specific RSTCR in DTB.\n");
-		return -ENODEV;
-	}
-
-	of_address_to_resource(np, 0, &res);
-
-	printk(KERN_INFO "sbc8560: Found BRSTCR at %pR\n", &res);
-
-	brstcr = ioremap(res.start, resource_size(&res));
-	if(!brstcr)
-		printk(KERN_WARNING "sbc8560: ioremap of brstcr failed.\n");
-
-	of_node_put(np);
-
-	return 0;
-}
-
-arch_initcall(sbc8560_bdrstcr_init);
-
-void sbc8560_rstcr_restart(char * cmd)
-{
-	local_irq_disable();
-	if(brstcr)
-		clrbits8(brstcr, 0x80);
-
-	while(1);
-}
-
-define_machine(sbc8560) {
-	.name			= "SBC8560",
-	.probe			= sbc8560_probe,
-	.setup_arch		= sbc8560_setup_arch,
-	.init_IRQ		= sbc8560_pic_init,
-	.show_cpuinfo		= sbc8560_show_cpuinfo,
-	.get_irq		= mpic_get_irq,
-	.restart		= sbc8560_rstcr_restart,
-	.calibrate_decr		= generic_calibrate_decr,
-	.progress		= udbg_progress,
-};