blob: 257a68f3c2feef3a369093f5bade883e814b7648 [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef __ASM_ARC_ENTRY_ARCV2_H
#define __ASM_ARC_ENTRY_ARCV2_H
#include <asm/asm-offsets.h>
#include <asm/irqflags-arcv2.h>
#include <asm/thread_info.h> /* For THREAD_SIZE */
/*------------------------------------------------------------------------*/
.macro INTERRUPT_PROLOGUE called_from
; Before jumping to Interrupt Vector, hardware micro-ops did following:
; 1. SP auto-switched to kernel mode stack
; 2. STATUS32.Z flag set to U mode at time of interrupt (U:1, K:0)
; 3. Auto saved: r0-r11, blink, LPE,LPS,LPC, JLI,LDI,EI, PC, STAT32
;
; Now manually save: r12, sp, fp, gp, r25
#ifdef CONFIG_ARC_HAS_ACCL_REGS
PUSH r59
PUSH r58
#endif
PUSH r30
PUSH r12
; Saving pt_regs->sp correctly requires some extra work due to the way
; Auto stack switch works
; - U mode: retrieve it from AUX_USER_SP
; - K mode: add the offset from current SP where H/w starts auto push
;
; Utilize the fact that Z bit is set if Intr taken in U mode
mov.nz r9, sp
add.nz r9, r9, SZ_PT_REGS - PT_sp - 4
bnz 1f
lr r9, [AUX_USER_SP]
1:
PUSH r9 ; SP
PUSH fp
PUSH gp
#ifdef CONFIG_ARC_CURR_IN_REG
PUSH r25 ; user_r25
GET_CURR_TASK_ON_CPU r25
#else
sub sp, sp, 4
#endif
.ifnc \called_from, exception
sub sp, sp, 12 ; BTA/ECR/orig_r0 placeholder per pt_regs
.endif
.endm
/*------------------------------------------------------------------------*/
.macro INTERRUPT_EPILOGUE called_from
.ifnc \called_from, exception
add sp, sp, 12 ; skip BTA/ECR/orig_r0 placeholderss
.endif
#ifdef CONFIG_ARC_CURR_IN_REG
POP r25
#else
add sp, sp, 4
#endif
POP gp
POP fp
; Don't touch AUX_USER_SP if returning to K mode (Z bit set)
; (Z bit set on K mode is inverse of INTERRUPT_PROLOGUE)
add.z sp, sp, 4
bz 1f
POPAX AUX_USER_SP
1:
POP r12
POP r30
#ifdef CONFIG_ARC_HAS_ACCL_REGS
POP r58
POP r59
#endif
.endm
/*------------------------------------------------------------------------*/
.macro EXCEPTION_PROLOGUE
; Before jumping to Exception Vector, hardware micro-ops did following:
; 1. SP auto-switched to kernel mode stack
; 2. STATUS32.Z flag set to U mode at time of interrupt (U:1,K:0)
;
; Now manually save the complete reg file
PUSH r9 ; freeup a register: slot of erstatus
PUSHAX eret
sub sp, sp, 12 ; skip JLI, LDI, EI
PUSH lp_count
PUSHAX lp_start
PUSHAX lp_end
PUSH blink
PUSH r11
PUSH r10
ld.as r9, [sp, 10] ; load stashed r9 (status32 stack slot)
lr r10, [erstatus]
st.as r10, [sp, 10] ; save status32 at it's right stack slot
PUSH r9
PUSH r8
PUSH r7
PUSH r6
PUSH r5
PUSH r4
PUSH r3
PUSH r2
PUSH r1
PUSH r0
; -- for interrupts, regs above are auto-saved by h/w in that order --
; Now do what ISR prologue does (manually save r12, sp, fp, gp, r25)
;
; Set Z flag if this was from U mode (expected by INTERRUPT_PROLOGUE)
; Although H/w exception micro-ops do set Z flag for U mode (just like
; for interrupts), it could get clobbered in case we soft land here from
; a TLB Miss exception handler (tlbex.S)
and r10, r10, STATUS_U_MASK
xor.f 0, r10, STATUS_U_MASK
INTERRUPT_PROLOGUE exception
PUSHAX erbta
PUSHAX ecr ; r9 contains ECR, expected by EV_Trap
PUSH r0 ; orig_r0
.endm
/*------------------------------------------------------------------------*/
.macro EXCEPTION_EPILOGUE
; Assumes r0 has PT_status32
btst r0, STATUS_U_BIT ; Z flag set if K, used in INTERRUPT_EPILOGUE
add sp, sp, 8 ; orig_r0/ECR don't need restoring
POPAX erbta
INTERRUPT_EPILOGUE exception
POP r0
POP r1
POP r2
POP r3
POP r4
POP r5
POP r6
POP r7
POP r8
POP r9
POP r10
POP r11
POP blink
POPAX lp_end
POPAX lp_start
POP r9
mov lp_count, r9
add sp, sp, 12 ; skip JLI, LDI, EI
POPAX eret
POPAX erstatus
ld.as r9, [sp, -12] ; reload r9 which got clobbered
.endm
.macro FAKE_RET_FROM_EXCPN
lr r9, [status32]
bic r9, r9, (STATUS_U_MASK|STATUS_DE_MASK|STATUS_AE_MASK)
or r9, r9, (STATUS_L_MASK|STATUS_IE_MASK)
kflag r9
.endm
/* Get thread_info of "current" tsk */
.macro GET_CURR_THR_INFO_FROM_SP reg
bmskn \reg, sp, THREAD_SHIFT - 1
.endm
/* Get CPU-ID of this core */
.macro GET_CPU_ID reg
lr \reg, [identity]
xbfu \reg, \reg, 0xE8 /* 00111 01000 */
/* M = 8-1 N = 8 */
.endm
#endif