| /* Copyright (C) 2016-2017 B.A.T.M.A.N. contributors: |
| * |
| * Matthias Schiffer |
| * |
| * Permission to use, copy, modify, and/or distribute this software for any |
| * purpose with or without fee is hereby granted, provided that the above |
| * copyright notice and this permission notice appear in all copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
| * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
| * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
| * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| */ |
| |
| #ifndef _UAPI_LINUX_BATMAN_ADV_H_ |
| #define _UAPI_LINUX_BATMAN_ADV_H_ |
| |
| #define BATADV_NL_NAME "batadv" |
| |
| #define BATADV_NL_MCAST_GROUP_TPMETER "tpmeter" |
| |
| /** |
| * enum batadv_tt_client_flags - TT client specific flags |
| * @BATADV_TT_CLIENT_DEL: the client has to be deleted from the table |
| * @BATADV_TT_CLIENT_ROAM: the client roamed to/from another node and the new |
| * update telling its new real location has not been received/sent yet |
| * @BATADV_TT_CLIENT_WIFI: this client is connected through a wifi interface. |
| * This information is used by the "AP Isolation" feature |
| * @BATADV_TT_CLIENT_ISOLA: this client is considered "isolated". This |
| * information is used by the Extended Isolation feature |
| * @BATADV_TT_CLIENT_NOPURGE: this client should never be removed from the table |
| * @BATADV_TT_CLIENT_NEW: this client has been added to the local table but has |
| * not been announced yet |
| * @BATADV_TT_CLIENT_PENDING: this client is marked for removal but it is kept |
| * in the table for one more originator interval for consistency purposes |
| * @BATADV_TT_CLIENT_TEMP: this global client has been detected to be part of |
| * the network but no nnode has already announced it |
| * |
| * Bits from 0 to 7 are called _remote flags_ because they are sent on the wire. |
| * Bits from 8 to 15 are called _local flags_ because they are used for local |
| * computations only. |
| * |
| * Bits from 4 to 7 - a subset of remote flags - are ensured to be in sync with |
| * the other nodes in the network. To achieve this goal these flags are included |
| * in the TT CRC computation. |
| */ |
| enum batadv_tt_client_flags { |
| BATADV_TT_CLIENT_DEL = (1 << 0), |
| BATADV_TT_CLIENT_ROAM = (1 << 1), |
| BATADV_TT_CLIENT_WIFI = (1 << 4), |
| BATADV_TT_CLIENT_ISOLA = (1 << 5), |
| BATADV_TT_CLIENT_NOPURGE = (1 << 8), |
| BATADV_TT_CLIENT_NEW = (1 << 9), |
| BATADV_TT_CLIENT_PENDING = (1 << 10), |
| BATADV_TT_CLIENT_TEMP = (1 << 11), |
| }; |
| |
| /** |
| * enum batadv_nl_attrs - batman-adv netlink attributes |
| * |
| * @BATADV_ATTR_UNSPEC: unspecified attribute to catch errors |
| * @BATADV_ATTR_VERSION: batman-adv version string |
| * @BATADV_ATTR_ALGO_NAME: name of routing algorithm |
| * @BATADV_ATTR_MESH_IFINDEX: index of the batman-adv interface |
| * @BATADV_ATTR_MESH_IFNAME: name of the batman-adv interface |
| * @BATADV_ATTR_MESH_ADDRESS: mac address of the batman-adv interface |
| * @BATADV_ATTR_HARD_IFINDEX: index of the non-batman-adv interface |
| * @BATADV_ATTR_HARD_IFNAME: name of the non-batman-adv interface |
| * @BATADV_ATTR_HARD_ADDRESS: mac address of the non-batman-adv interface |
| * @BATADV_ATTR_ORIG_ADDRESS: originator mac address |
| * @BATADV_ATTR_TPMETER_RESULT: result of run (see batadv_tp_meter_status) |
| * @BATADV_ATTR_TPMETER_TEST_TIME: time (msec) the run took |
| * @BATADV_ATTR_TPMETER_BYTES: amount of acked bytes during run |
| * @BATADV_ATTR_TPMETER_COOKIE: session cookie to match tp_meter session |
| * @BATADV_ATTR_PAD: attribute used for padding for 64-bit alignment |
| * @BATADV_ATTR_ACTIVE: Flag indicating if the hard interface is active |
| * @BATADV_ATTR_TT_ADDRESS: Client MAC address |
| * @BATADV_ATTR_TT_TTVN: Translation table version |
| * @BATADV_ATTR_TT_LAST_TTVN: Previous translation table version |
| * @BATADV_ATTR_TT_CRC32: CRC32 over translation table |
| * @BATADV_ATTR_TT_VID: VLAN ID |
| * @BATADV_ATTR_TT_FLAGS: Translation table client flags |
| * @BATADV_ATTR_FLAG_BEST: Flags indicating entry is the best |
| * @BATADV_ATTR_LAST_SEEN_MSECS: Time in milliseconds since last seen |
| * @BATADV_ATTR_NEIGH_ADDRESS: Neighbour MAC address |
| * @BATADV_ATTR_TQ: TQ to neighbour |
| * @BATADV_ATTR_THROUGHPUT: Estimated throughput to Neighbour |
| * @BATADV_ATTR_BANDWIDTH_UP: Reported uplink bandwidth |
| * @BATADV_ATTR_BANDWIDTH_DOWN: Reported downlink bandwidth |
| * @BATADV_ATTR_ROUTER: Gateway router MAC address |
| * @BATADV_ATTR_BLA_OWN: Flag indicating own originator |
| * @BATADV_ATTR_BLA_ADDRESS: Bridge loop avoidance claim MAC address |
| * @BATADV_ATTR_BLA_VID: BLA VLAN ID |
| * @BATADV_ATTR_BLA_BACKBONE: BLA gateway originator MAC address |
| * @BATADV_ATTR_BLA_CRC: BLA CRC |
| * @__BATADV_ATTR_AFTER_LAST: internal use |
| * @NUM_BATADV_ATTR: total number of batadv_nl_attrs available |
| * @BATADV_ATTR_MAX: highest attribute number currently defined |
| */ |
| enum batadv_nl_attrs { |
| BATADV_ATTR_UNSPEC, |
| BATADV_ATTR_VERSION, |
| BATADV_ATTR_ALGO_NAME, |
| BATADV_ATTR_MESH_IFINDEX, |
| BATADV_ATTR_MESH_IFNAME, |
| BATADV_ATTR_MESH_ADDRESS, |
| BATADV_ATTR_HARD_IFINDEX, |
| BATADV_ATTR_HARD_IFNAME, |
| BATADV_ATTR_HARD_ADDRESS, |
| BATADV_ATTR_ORIG_ADDRESS, |
| BATADV_ATTR_TPMETER_RESULT, |
| BATADV_ATTR_TPMETER_TEST_TIME, |
| BATADV_ATTR_TPMETER_BYTES, |
| BATADV_ATTR_TPMETER_COOKIE, |
| BATADV_ATTR_PAD, |
| BATADV_ATTR_ACTIVE, |
| BATADV_ATTR_TT_ADDRESS, |
| BATADV_ATTR_TT_TTVN, |
| BATADV_ATTR_TT_LAST_TTVN, |
| BATADV_ATTR_TT_CRC32, |
| BATADV_ATTR_TT_VID, |
| BATADV_ATTR_TT_FLAGS, |
| BATADV_ATTR_FLAG_BEST, |
| BATADV_ATTR_LAST_SEEN_MSECS, |
| BATADV_ATTR_NEIGH_ADDRESS, |
| BATADV_ATTR_TQ, |
| BATADV_ATTR_THROUGHPUT, |
| BATADV_ATTR_BANDWIDTH_UP, |
| BATADV_ATTR_BANDWIDTH_DOWN, |
| BATADV_ATTR_ROUTER, |
| BATADV_ATTR_BLA_OWN, |
| BATADV_ATTR_BLA_ADDRESS, |
| BATADV_ATTR_BLA_VID, |
| BATADV_ATTR_BLA_BACKBONE, |
| BATADV_ATTR_BLA_CRC, |
| /* add attributes above here, update the policy in netlink.c */ |
| __BATADV_ATTR_AFTER_LAST, |
| NUM_BATADV_ATTR = __BATADV_ATTR_AFTER_LAST, |
| BATADV_ATTR_MAX = __BATADV_ATTR_AFTER_LAST - 1 |
| }; |
| |
| /** |
| * enum batadv_nl_commands - supported batman-adv netlink commands |
| * |
| * @BATADV_CMD_UNSPEC: unspecified command to catch errors |
| * @BATADV_CMD_GET_MESH_INFO: Query basic information about batman-adv device |
| * @BATADV_CMD_TP_METER: Start a tp meter session |
| * @BATADV_CMD_TP_METER_CANCEL: Cancel a tp meter session |
| * @BATADV_CMD_GET_ROUTING_ALGOS: Query the list of routing algorithms. |
| * @BATADV_CMD_GET_HARDIFS: Query list of hard interfaces |
| * @BATADV_CMD_GET_TRANSTABLE_LOCAL: Query list of local translations |
| * @BATADV_CMD_GET_TRANSTABLE_GLOBAL Query list of global translations |
| * @BATADV_CMD_GET_ORIGINATORS: Query list of originators |
| * @BATADV_CMD_GET_NEIGHBORS: Query list of neighbours |
| * @BATADV_CMD_GET_GATEWAYS: Query list of gateways |
| * @BATADV_CMD_GET_BLA_CLAIM: Query list of bridge loop avoidance claims |
| * @BATADV_CMD_GET_BLA_BACKBONE: Query list of bridge loop avoidance backbones |
| * @__BATADV_CMD_AFTER_LAST: internal use |
| * @BATADV_CMD_MAX: highest used command number |
| */ |
| enum batadv_nl_commands { |
| BATADV_CMD_UNSPEC, |
| BATADV_CMD_GET_MESH_INFO, |
| BATADV_CMD_TP_METER, |
| BATADV_CMD_TP_METER_CANCEL, |
| BATADV_CMD_GET_ROUTING_ALGOS, |
| BATADV_CMD_GET_HARDIFS, |
| BATADV_CMD_GET_TRANSTABLE_LOCAL, |
| BATADV_CMD_GET_TRANSTABLE_GLOBAL, |
| BATADV_CMD_GET_ORIGINATORS, |
| BATADV_CMD_GET_NEIGHBORS, |
| BATADV_CMD_GET_GATEWAYS, |
| BATADV_CMD_GET_BLA_CLAIM, |
| BATADV_CMD_GET_BLA_BACKBONE, |
| /* add new commands above here */ |
| __BATADV_CMD_AFTER_LAST, |
| BATADV_CMD_MAX = __BATADV_CMD_AFTER_LAST - 1 |
| }; |
| |
| /** |
| * enum batadv_tp_meter_reason - reason of a tp meter test run stop |
| * @BATADV_TP_REASON_COMPLETE: sender finished tp run |
| * @BATADV_TP_REASON_CANCEL: sender was stopped during run |
| * @BATADV_TP_REASON_DST_UNREACHABLE: receiver could not be reached or didn't |
| * answer |
| * @BATADV_TP_REASON_RESEND_LIMIT: (unused) sender retry reached limit |
| * @BATADV_TP_REASON_ALREADY_ONGOING: test to or from the same node already |
| * ongoing |
| * @BATADV_TP_REASON_MEMORY_ERROR: test was stopped due to low memory |
| * @BATADV_TP_REASON_CANT_SEND: failed to send via outgoing interface |
| * @BATADV_TP_REASON_TOO_MANY: too many ongoing sessions |
| */ |
| enum batadv_tp_meter_reason { |
| BATADV_TP_REASON_COMPLETE = 3, |
| BATADV_TP_REASON_CANCEL = 4, |
| /* error status >= 128 */ |
| BATADV_TP_REASON_DST_UNREACHABLE = 128, |
| BATADV_TP_REASON_RESEND_LIMIT = 129, |
| BATADV_TP_REASON_ALREADY_ONGOING = 130, |
| BATADV_TP_REASON_MEMORY_ERROR = 131, |
| BATADV_TP_REASON_CANT_SEND = 132, |
| BATADV_TP_REASON_TOO_MANY = 133, |
| }; |
| |
| #endif /* _UAPI_LINUX_BATMAN_ADV_H_ */ |
