diff --git a/drivers/net/enc28j60.c b/drivers/net/enc28j60.c
index aa0bf6e..e1b441e 100644
--- a/drivers/net/enc28j60.c
+++ b/drivers/net/enc28j60.c
@@ -110,7 +110,7 @@
 	}
 	if (ret && netif_msg_drv(priv))
 		printk(KERN_DEBUG DRV_NAME ": %s() failed: ret = %d\n",
-			__FUNCTION__, ret);
+			__func__, ret);
 
 	return ret;
 }
@@ -131,7 +131,7 @@
 		ret = spi_write(priv->spi, priv->spi_transfer_buf, len + 1);
 		if (ret && netif_msg_drv(priv))
 			printk(KERN_DEBUG DRV_NAME ": %s() failed: ret = %d\n",
-				__FUNCTION__, ret);
+				__func__, ret);
 	}
 	return ret;
 }
@@ -156,7 +156,7 @@
 	ret = spi_write_then_read(priv->spi, tx_buf, 1, rx_buf, slen);
 	if (ret)
 		printk(KERN_DEBUG DRV_NAME ": %s() failed: ret = %d\n",
-			__FUNCTION__, ret);
+			__func__, ret);
 	else
 		val = rx_buf[slen - 1];
 
@@ -176,14 +176,14 @@
 	ret = spi_write(priv->spi, priv->spi_transfer_buf, 2);
 	if (ret && netif_msg_drv(priv))
 		printk(KERN_DEBUG DRV_NAME ": %s() failed: ret = %d\n",
-			__FUNCTION__, ret);
+			__func__, ret);
 	return ret;
 }
 
 static void enc28j60_soft_reset(struct enc28j60_net *priv)
 {
 	if (netif_msg_hw(priv))
-		printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __FUNCTION__);
+		printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
 
 	spi_write_op(priv, ENC28J60_SOFT_RESET, 0, ENC28J60_SOFT_RESET);
 	/* Errata workaround #1, CLKRDY check is unreliable,
@@ -357,7 +357,7 @@
 		reg = nolock_regw_read(priv, ERDPTL);
 		if (reg != addr)
 			printk(KERN_DEBUG DRV_NAME ": %s() error writing ERDPT "
-				"(0x%04x - 0x%04x)\n", __FUNCTION__, reg, addr);
+				"(0x%04x - 0x%04x)\n", __func__, reg, addr);
 	}
 #endif
 	spi_read_buf(priv, len, data);
@@ -380,7 +380,7 @@
 		if (reg != TXSTART_INIT)
 			printk(KERN_DEBUG DRV_NAME
 				": %s() ERWPT:0x%04x != 0x%04x\n",
-				__FUNCTION__, reg, TXSTART_INIT);
+				__func__, reg, TXSTART_INIT);
 	}
 #endif
 	/* Set the TXND pointer to correspond to the packet size given */
@@ -390,13 +390,13 @@
 	if (netif_msg_hw(priv))
 		printk(KERN_DEBUG DRV_NAME
 			": %s() after control byte ERWPT:0x%04x\n",
-			__FUNCTION__, nolock_regw_read(priv, EWRPTL));
+			__func__, nolock_regw_read(priv, EWRPTL));
 	/* copy the packet into the transmit buffer */
 	spi_write_buf(priv, len, data);
 	if (netif_msg_hw(priv))
 		printk(KERN_DEBUG DRV_NAME
 			 ": %s() after write packet ERWPT:0x%04x, len=%d\n",
-			 __FUNCTION__, nolock_regw_read(priv, EWRPTL), len);
+			 __func__, nolock_regw_read(priv, EWRPTL), len);
 	mutex_unlock(&priv->lock);
 }
 
@@ -495,7 +495,7 @@
 		if (netif_msg_drv(priv))
 			printk(KERN_DEBUG DRV_NAME
 				": %s() Hardware must be disabled to set "
-				"Mac address\n", __FUNCTION__);
+				"Mac address\n", __func__);
 		ret = -EBUSY;
 	}
 	mutex_unlock(&priv->lock);
@@ -575,7 +575,7 @@
 	if (start > 0x1FFF || end > 0x1FFF || start > end) {
 		if (netif_msg_drv(priv))
 			printk(KERN_ERR DRV_NAME ": %s(%d, %d) RXFIFO "
-				"bad parameters!\n", __FUNCTION__, start, end);
+				"bad parameters!\n", __func__, start, end);
 		return;
 	}
 	/* set receive buffer start + end */
@@ -591,7 +591,7 @@
 	if (start > 0x1FFF || end > 0x1FFF || start > end) {
 		if (netif_msg_drv(priv))
 			printk(KERN_ERR DRV_NAME ": %s(%d, %d) TXFIFO "
-				"bad parameters!\n", __FUNCTION__, start, end);
+				"bad parameters!\n", __func__, start, end);
 		return;
 	}
 	/* set transmit buffer start + end */
@@ -630,7 +630,7 @@
 	u8 reg;
 
 	if (netif_msg_drv(priv))
-		printk(KERN_DEBUG DRV_NAME ": %s() - %s\n", __FUNCTION__,
+		printk(KERN_DEBUG DRV_NAME ": %s() - %s\n", __func__,
 			priv->full_duplex ? "FullDuplex" : "HalfDuplex");
 
 	mutex_lock(&priv->lock);
@@ -661,7 +661,7 @@
 	if (reg == 0x00 || reg == 0xff) {
 		if (netif_msg_drv(priv))
 			printk(KERN_DEBUG DRV_NAME ": %s() Invalid RevId %d\n",
-				__FUNCTION__, reg);
+				__func__, reg);
 		return 0;
 	}
 
@@ -724,7 +724,7 @@
 	/* enable interrupts */
 	if (netif_msg_hw(priv))
 		printk(KERN_DEBUG DRV_NAME ": %s() enabling interrupts.\n",
-			__FUNCTION__);
+			__func__);
 
 	enc28j60_phy_write(priv, PHIE, PHIE_PGEIE | PHIE_PLNKIE);
 
@@ -888,7 +888,7 @@
 		if (netif_msg_rx_err(priv))
 			dev_err(&ndev->dev,
 				"%s() Invalid packet address!! 0x%04x\n",
-				__FUNCTION__, priv->next_pk_ptr);
+				__func__, priv->next_pk_ptr);
 		/* packet address corrupted: reset RX logic */
 		mutex_lock(&priv->lock);
 		nolock_reg_bfclr(priv, ECON1, ECON1_RXEN);
@@ -917,7 +917,7 @@
 	rxstat |= rsv[4];
 
 	if (netif_msg_rx_status(priv))
-		enc28j60_dump_rsv(priv, __FUNCTION__, next_packet, len, rxstat);
+		enc28j60_dump_rsv(priv, __func__, next_packet, len, rxstat);
 
 	if (!RSV_GETBIT(rxstat, RSV_RXOK)) {
 		if (netif_msg_rx_err(priv))
@@ -941,7 +941,7 @@
 			enc28j60_mem_read(priv, priv->next_pk_ptr + sizeof(rsv),
 					len, skb_put(skb, len));
 			if (netif_msg_pktdata(priv))
-				dump_packet(__FUNCTION__, skb->len, skb->data);
+				dump_packet(__func__, skb->len, skb->data);
 			skb->protocol = eth_type_trans(skb, ndev);
 			/* update statistics */
 			ndev->stats.rx_packets++;
@@ -958,7 +958,7 @@
 	erxrdpt = erxrdpt_workaround(next_packet, RXSTART_INIT, RXEND_INIT);
 	if (netif_msg_hw(priv))
 		printk(KERN_DEBUG DRV_NAME ": %s() ERXRDPT:0x%04x\n",
-			__FUNCTION__, erxrdpt);
+			__func__, erxrdpt);
 
 	mutex_lock(&priv->lock);
 	nolock_regw_write(priv, ERXRDPTL, erxrdpt);
@@ -968,7 +968,7 @@
 		reg = nolock_regw_read(priv, ERXRDPTL);
 		if (reg != erxrdpt)
 			printk(KERN_DEBUG DRV_NAME ": %s() ERXRDPT verify "
-				"error (0x%04x - 0x%04x)\n", __FUNCTION__,
+				"error (0x%04x - 0x%04x)\n", __func__,
 				reg, erxrdpt);
 	}
 #endif
@@ -1006,7 +1006,7 @@
 	mutex_unlock(&priv->lock);
 	if (netif_msg_rx_status(priv))
 		printk(KERN_DEBUG DRV_NAME ": %s() free_space = %d\n",
-			__FUNCTION__, free_space);
+			__func__, free_space);
 	return free_space;
 }
 
@@ -1022,7 +1022,7 @@
 	reg = enc28j60_phy_read(priv, PHSTAT2);
 	if (netif_msg_hw(priv))
 		printk(KERN_DEBUG DRV_NAME ": %s() PHSTAT1: %04x, "
-			"PHSTAT2: %04x\n", __FUNCTION__,
+			"PHSTAT2: %04x\n", __func__,
 			enc28j60_phy_read(priv, PHSTAT1), reg);
 	duplex = reg & PHSTAT2_DPXSTAT;
 
@@ -1095,7 +1095,7 @@
 	int intflags, loop;
 
 	if (netif_msg_intr(priv))
-		printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __FUNCTION__);
+		printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
 	/* disable further interrupts */
 	locked_reg_bfclr(priv, EIE, EIE_INTIE);
 
@@ -1198,7 +1198,7 @@
 	/* re-enable interrupts */
 	locked_reg_bfset(priv, EIE, EIE_INTIE);
 	if (netif_msg_intr(priv))
-		printk(KERN_DEBUG DRV_NAME ": %s() exit\n", __FUNCTION__);
+		printk(KERN_DEBUG DRV_NAME ": %s() exit\n", __func__);
 }
 
 /*
@@ -1213,7 +1213,7 @@
 			": Tx Packet Len:%d\n", priv->tx_skb->len);
 
 	if (netif_msg_pktdata(priv))
-		dump_packet(__FUNCTION__,
+		dump_packet(__func__,
 			    priv->tx_skb->len, priv->tx_skb->data);
 	enc28j60_packet_write(priv, priv->tx_skb->len, priv->tx_skb->data);
 
@@ -1254,7 +1254,7 @@
 	struct enc28j60_net *priv = netdev_priv(dev);
 
 	if (netif_msg_tx_queued(priv))
-		printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __FUNCTION__);
+		printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
 
 	/* If some error occurs while trying to transmit this
 	 * packet, you should return '1' from this function.
@@ -1325,7 +1325,7 @@
 	struct enc28j60_net *priv = netdev_priv(dev);
 
 	if (netif_msg_drv(priv))
-		printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __FUNCTION__);
+		printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
 
 	if (!is_valid_ether_addr(dev->dev_addr)) {
 		if (netif_msg_ifup(priv)) {
@@ -1363,7 +1363,7 @@
 	struct enc28j60_net *priv = netdev_priv(dev);
 
 	if (netif_msg_drv(priv))
-		printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __FUNCTION__);
+		printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
 
 	enc28j60_hw_disable(priv);
 	enc28j60_lowpower(priv, true);