| #ifndef __NET_CFG80211_H |
| #define __NET_CFG80211_H |
| /* |
| * 802.11 device and configuration interface |
| * |
| * Copyright 2006-2010 Johannes Berg <johannes@sipsolutions.net> |
| * Copyright 2013-2014 Intel Mobile Communications GmbH |
| * Copyright 2015-2017 Intel Deutschland GmbH |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/netdevice.h> |
| #include <linux/debugfs.h> |
| #include <linux/list.h> |
| #include <linux/bug.h> |
| #include <linux/netlink.h> |
| #include <linux/skbuff.h> |
| #include <linux/nl80211.h> |
| #include <linux/if_ether.h> |
| #include <linux/ieee80211.h> |
| #include <linux/net.h> |
| #include <net/regulatory.h> |
| |
| /** |
| * DOC: Introduction |
| * |
| * cfg80211 is the configuration API for 802.11 devices in Linux. It bridges |
| * userspace and drivers, and offers some utility functionality associated |
| * with 802.11. cfg80211 must, directly or indirectly via mac80211, be used |
| * by all modern wireless drivers in Linux, so that they offer a consistent |
| * API through nl80211. For backward compatibility, cfg80211 also offers |
| * wireless extensions to userspace, but hides them from drivers completely. |
| * |
| * Additionally, cfg80211 contains code to help enforce regulatory spectrum |
| * use restrictions. |
| */ |
| |
| |
| /** |
| * DOC: Device registration |
| * |
| * In order for a driver to use cfg80211, it must register the hardware device |
| * with cfg80211. This happens through a number of hardware capability structs |
| * described below. |
| * |
| * The fundamental structure for each device is the 'wiphy', of which each |
| * instance describes a physical wireless device connected to the system. Each |
| * such wiphy can have zero, one, or many virtual interfaces associated with |
| * it, which need to be identified as such by pointing the network interface's |
| * @ieee80211_ptr pointer to a &struct wireless_dev which further describes |
| * the wireless part of the interface, normally this struct is embedded in the |
| * network interface's private data area. Drivers can optionally allow creating |
| * or destroying virtual interfaces on the fly, but without at least one or the |
| * ability to create some the wireless device isn't useful. |
| * |
| * Each wiphy structure contains device capability information, and also has |
| * a pointer to the various operations the driver offers. The definitions and |
| * structures here describe these capabilities in detail. |
| */ |
| |
| struct wiphy; |
| |
| /* |
| * wireless hardware capability structures |
| */ |
| |
| /** |
| * enum ieee80211_channel_flags - channel flags |
| * |
| * Channel flags set by the regulatory control code. |
| * |
| * @IEEE80211_CHAN_DISABLED: This channel is disabled. |
| * @IEEE80211_CHAN_NO_IR: do not initiate radiation, this includes |
| * sending probe requests or beaconing. |
| * @IEEE80211_CHAN_RADAR: Radar detection is required on this channel. |
| * @IEEE80211_CHAN_NO_HT40PLUS: extension channel above this channel |
| * is not permitted. |
| * @IEEE80211_CHAN_NO_HT40MINUS: extension channel below this channel |
| * is not permitted. |
| * @IEEE80211_CHAN_NO_OFDM: OFDM is not allowed on this channel. |
| * @IEEE80211_CHAN_NO_80MHZ: If the driver supports 80 MHz on the band, |
| * this flag indicates that an 80 MHz channel cannot use this |
| * channel as the control or any of the secondary channels. |
| * This may be due to the driver or due to regulatory bandwidth |
| * restrictions. |
| * @IEEE80211_CHAN_NO_160MHZ: If the driver supports 160 MHz on the band, |
| * this flag indicates that an 160 MHz channel cannot use this |
| * channel as the control or any of the secondary channels. |
| * This may be due to the driver or due to regulatory bandwidth |
| * restrictions. |
| * @IEEE80211_CHAN_INDOOR_ONLY: see %NL80211_FREQUENCY_ATTR_INDOOR_ONLY |
| * @IEEE80211_CHAN_IR_CONCURRENT: see %NL80211_FREQUENCY_ATTR_IR_CONCURRENT |
| * @IEEE80211_CHAN_NO_20MHZ: 20 MHz bandwidth is not permitted |
| * on this channel. |
| * @IEEE80211_CHAN_NO_10MHZ: 10 MHz bandwidth is not permitted |
| * on this channel. |
| * |
| */ |
| enum ieee80211_channel_flags { |
| IEEE80211_CHAN_DISABLED = 1<<0, |
| IEEE80211_CHAN_NO_IR = 1<<1, |
| /* hole at 1<<2 */ |
| IEEE80211_CHAN_RADAR = 1<<3, |
| IEEE80211_CHAN_NO_HT40PLUS = 1<<4, |
| IEEE80211_CHAN_NO_HT40MINUS = 1<<5, |
| IEEE80211_CHAN_NO_OFDM = 1<<6, |
| IEEE80211_CHAN_NO_80MHZ = 1<<7, |
| IEEE80211_CHAN_NO_160MHZ = 1<<8, |
| IEEE80211_CHAN_INDOOR_ONLY = 1<<9, |
| IEEE80211_CHAN_IR_CONCURRENT = 1<<10, |
| IEEE80211_CHAN_NO_20MHZ = 1<<11, |
| IEEE80211_CHAN_NO_10MHZ = 1<<12, |
| }; |
| |
| #define IEEE80211_CHAN_NO_HT40 \ |
| (IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS) |
| |
| #define IEEE80211_DFS_MIN_CAC_TIME_MS 60000 |
| #define IEEE80211_DFS_MIN_NOP_TIME_MS (30 * 60 * 1000) |
| |
| /** |
| * struct ieee80211_channel - channel definition |
| * |
| * This structure describes a single channel for use |
| * with cfg80211. |
| * |
| * @center_freq: center frequency in MHz |
| * @hw_value: hardware-specific value for the channel |
| * @flags: channel flags from &enum ieee80211_channel_flags. |
| * @orig_flags: channel flags at registration time, used by regulatory |
| * code to support devices with additional restrictions |
| * @band: band this channel belongs to. |
| * @max_antenna_gain: maximum antenna gain in dBi |
| * @max_power: maximum transmission power (in dBm) |
| * @max_reg_power: maximum regulatory transmission power (in dBm) |
| * @beacon_found: helper to regulatory code to indicate when a beacon |
| * has been found on this channel. Use regulatory_hint_found_beacon() |
| * to enable this, this is useful only on 5 GHz band. |
| * @orig_mag: internal use |
| * @orig_mpwr: internal use |
| * @dfs_state: current state of this channel. Only relevant if radar is required |
| * on this channel. |
| * @dfs_state_entered: timestamp (jiffies) when the dfs state was entered. |
| * @dfs_cac_ms: DFS CAC time in milliseconds, this is valid for DFS channels. |
| */ |
| struct ieee80211_channel { |
| enum nl80211_band band; |
| u16 center_freq; |
| u16 hw_value; |
| u32 flags; |
| int max_antenna_gain; |
| int max_power; |
| int max_reg_power; |
| bool beacon_found; |
| u32 orig_flags; |
| int orig_mag, orig_mpwr; |
| enum nl80211_dfs_state dfs_state; |
| unsigned long dfs_state_entered; |
| unsigned int dfs_cac_ms; |
| }; |
| |
| /** |
| * enum ieee80211_rate_flags - rate flags |
| * |
| * Hardware/specification flags for rates. These are structured |
| * in a way that allows using the same bitrate structure for |
| * different bands/PHY modes. |
| * |
| * @IEEE80211_RATE_SHORT_PREAMBLE: Hardware can send with short |
| * preamble on this bitrate; only relevant in 2.4GHz band and |
| * with CCK rates. |
| * @IEEE80211_RATE_MANDATORY_A: This bitrate is a mandatory rate |
| * when used with 802.11a (on the 5 GHz band); filled by the |
| * core code when registering the wiphy. |
| * @IEEE80211_RATE_MANDATORY_B: This bitrate is a mandatory rate |
| * when used with 802.11b (on the 2.4 GHz band); filled by the |
| * core code when registering the wiphy. |
| * @IEEE80211_RATE_MANDATORY_G: This bitrate is a mandatory rate |
| * when used with 802.11g (on the 2.4 GHz band); filled by the |
| * core code when registering the wiphy. |
| * @IEEE80211_RATE_ERP_G: This is an ERP rate in 802.11g mode. |
| * @IEEE80211_RATE_SUPPORTS_5MHZ: Rate can be used in 5 MHz mode |
| * @IEEE80211_RATE_SUPPORTS_10MHZ: Rate can be used in 10 MHz mode |
| */ |
| enum ieee80211_rate_flags { |
| IEEE80211_RATE_SHORT_PREAMBLE = 1<<0, |
| IEEE80211_RATE_MANDATORY_A = 1<<1, |
| IEEE80211_RATE_MANDATORY_B = 1<<2, |
| IEEE80211_RATE_MANDATORY_G = 1<<3, |
| IEEE80211_RATE_ERP_G = 1<<4, |
| IEEE80211_RATE_SUPPORTS_5MHZ = 1<<5, |
| IEEE80211_RATE_SUPPORTS_10MHZ = 1<<6, |
| }; |
| |
| /** |
| * enum ieee80211_bss_type - BSS type filter |
| * |
| * @IEEE80211_BSS_TYPE_ESS: Infrastructure BSS |
| * @IEEE80211_BSS_TYPE_PBSS: Personal BSS |
| * @IEEE80211_BSS_TYPE_IBSS: Independent BSS |
| * @IEEE80211_BSS_TYPE_MBSS: Mesh BSS |
| * @IEEE80211_BSS_TYPE_ANY: Wildcard value for matching any BSS type |
| */ |
| enum ieee80211_bss_type { |
| IEEE80211_BSS_TYPE_ESS, |
| IEEE80211_BSS_TYPE_PBSS, |
| IEEE80211_BSS_TYPE_IBSS, |
| IEEE80211_BSS_TYPE_MBSS, |
| IEEE80211_BSS_TYPE_ANY |
| }; |
| |
| /** |
| * enum ieee80211_privacy - BSS privacy filter |
| * |
| * @IEEE80211_PRIVACY_ON: privacy bit set |
| * @IEEE80211_PRIVACY_OFF: privacy bit clear |
| * @IEEE80211_PRIVACY_ANY: Wildcard value for matching any privacy setting |
| */ |
| enum ieee80211_privacy { |
| IEEE80211_PRIVACY_ON, |
| IEEE80211_PRIVACY_OFF, |
| IEEE80211_PRIVACY_ANY |
| }; |
| |
| #define IEEE80211_PRIVACY(x) \ |
| ((x) ? IEEE80211_PRIVACY_ON : IEEE80211_PRIVACY_OFF) |
| |
| /** |
| * struct ieee80211_rate - bitrate definition |
| * |
| * This structure describes a bitrate that an 802.11 PHY can |
| * operate with. The two values @hw_value and @hw_value_short |
| * are only for driver use when pointers to this structure are |
| * passed around. |
| * |
| * @flags: rate-specific flags |
| * @bitrate: bitrate in units of 100 Kbps |
| * @hw_value: driver/hardware value for this rate |
| * @hw_value_short: driver/hardware value for this rate when |
| * short preamble is used |
| */ |
| struct ieee80211_rate { |
| u32 flags; |
| u16 bitrate; |
| u16 hw_value, hw_value_short; |
| }; |
| |
| /** |
| * struct ieee80211_sta_ht_cap - STA's HT capabilities |
| * |
| * This structure describes most essential parameters needed |
| * to describe 802.11n HT capabilities for an STA. |
| * |
| * @ht_supported: is HT supported by the STA |
| * @cap: HT capabilities map as described in 802.11n spec |
| * @ampdu_factor: Maximum A-MPDU length factor |
| * @ampdu_density: Minimum A-MPDU spacing |
| * @mcs: Supported MCS rates |
| */ |
| struct ieee80211_sta_ht_cap { |
| u16 cap; /* use IEEE80211_HT_CAP_ */ |
| bool ht_supported; |
| u8 ampdu_factor; |
| u8 ampdu_density; |
| struct ieee80211_mcs_info mcs; |
| }; |
| |
| /** |
| * struct ieee80211_sta_vht_cap - STA's VHT capabilities |
| * |
| * This structure describes most essential parameters needed |
| * to describe 802.11ac VHT capabilities for an STA. |
| * |
| * @vht_supported: is VHT supported by the STA |
| * @cap: VHT capabilities map as described in 802.11ac spec |
| * @vht_mcs: Supported VHT MCS rates |
| */ |
| struct ieee80211_sta_vht_cap { |
| bool vht_supported; |
| u32 cap; /* use IEEE80211_VHT_CAP_ */ |
| struct ieee80211_vht_mcs_info vht_mcs; |
| }; |
| |
| /** |
| * struct ieee80211_supported_band - frequency band definition |
| * |
| * This structure describes a frequency band a wiphy |
| * is able to operate in. |
| * |
| * @channels: Array of channels the hardware can operate in |
| * in this band. |
| * @band: the band this structure represents |
| * @n_channels: Number of channels in @channels |
| * @bitrates: Array of bitrates the hardware can operate with |
| * in this band. Must be sorted to give a valid "supported |
| * rates" IE, i.e. CCK rates first, then OFDM. |
| * @n_bitrates: Number of bitrates in @bitrates |
| * @ht_cap: HT capabilities in this band |
| * @vht_cap: VHT capabilities in this band |
| */ |
| struct ieee80211_supported_band { |
| struct ieee80211_channel *channels; |
| struct ieee80211_rate *bitrates; |
| enum nl80211_band band; |
| int n_channels; |
| int n_bitrates; |
| struct ieee80211_sta_ht_cap ht_cap; |
| struct ieee80211_sta_vht_cap vht_cap; |
| }; |
| |
| /** |
| * wiphy_read_of_freq_limits - read frequency limits from device tree |
| * |
| * @wiphy: the wireless device to get extra limits for |
| * |
| * Some devices may have extra limitations specified in DT. This may be useful |
| * for chipsets that normally support more bands but are limited due to board |
| * design (e.g. by antennas or external power amplifier). |
| * |
| * This function reads info from DT and uses it to *modify* channels (disable |
| * unavailable ones). It's usually a *bad* idea to use it in drivers with |
| * shared channel data as DT limitations are device specific. You should make |
| * sure to call it only if channels in wiphy are copied and can be modified |
| * without affecting other devices. |
| * |
| * As this function access device node it has to be called after set_wiphy_dev. |
| * It also modifies channels so they have to be set first. |
| * If using this helper, call it before wiphy_register(). |
| */ |
| #ifdef CONFIG_OF |
| void wiphy_read_of_freq_limits(struct wiphy *wiphy); |
| #else /* CONFIG_OF */ |
| static inline void wiphy_read_of_freq_limits(struct wiphy *wiphy) |
| { |
| } |
| #endif /* !CONFIG_OF */ |
| |
| |
| /* |
| * Wireless hardware/device configuration structures and methods |
| */ |
| |
| /** |
| * DOC: Actions and configuration |
| * |
| * Each wireless device and each virtual interface offer a set of configuration |
| * operations and other actions that are invoked by userspace. Each of these |
| * actions is described in the operations structure, and the parameters these |
| * operations use are described separately. |
| * |
| * Additionally, some operations are asynchronous and expect to get status |
| * information via some functions that drivers need to call. |
| * |
| * Scanning and BSS list handling with its associated functionality is described |
| * in a separate chapter. |
| */ |
| |
| #define VHT_MUMIMO_GROUPS_DATA_LEN (WLAN_MEMBERSHIP_LEN +\ |
| WLAN_USER_POSITION_LEN) |
| |
| /** |
| * struct vif_params - describes virtual interface parameters |
| * @flags: monitor interface flags, unchanged if 0, otherwise |
| * %MONITOR_FLAG_CHANGED will be set |
| * @use_4addr: use 4-address frames |
| * @macaddr: address to use for this virtual interface. |
| * If this parameter is set to zero address the driver may |
| * determine the address as needed. |
| * This feature is only fully supported by drivers that enable the |
| * %NL80211_FEATURE_MAC_ON_CREATE flag. Others may support creating |
| ** only p2p devices with specified MAC. |
| * @vht_mumimo_groups: MU-MIMO groupID, used for monitoring MU-MIMO packets |
| * belonging to that MU-MIMO groupID; %NULL if not changed |
| * @vht_mumimo_follow_addr: MU-MIMO follow address, used for monitoring |
| * MU-MIMO packets going to the specified station; %NULL if not changed |
| */ |
| struct vif_params { |
| u32 flags; |
| int use_4addr; |
| u8 macaddr[ETH_ALEN]; |
| const u8 *vht_mumimo_groups; |
| const u8 *vht_mumimo_follow_addr; |
| }; |
| |
| /** |
| * struct key_params - key information |
| * |
| * Information about a key |
| * |
| * @key: key material |
| * @key_len: length of key material |
| * @cipher: cipher suite selector |
| * @seq: sequence counter (IV/PN) for TKIP and CCMP keys, only used |
| * with the get_key() callback, must be in little endian, |
| * length given by @seq_len. |
| * @seq_len: length of @seq. |
| */ |
| struct key_params { |
| const u8 *key; |
| const u8 *seq; |
| int key_len; |
| int seq_len; |
| u32 cipher; |
| }; |
| |
| /** |
| * struct cfg80211_chan_def - channel definition |
| * @chan: the (control) channel |
| * @width: channel width |
| * @center_freq1: center frequency of first segment |
| * @center_freq2: center frequency of second segment |
| * (only with 80+80 MHz) |
| */ |
| struct cfg80211_chan_def { |
| struct ieee80211_channel *chan; |
| enum nl80211_chan_width width; |
| u32 center_freq1; |
| u32 center_freq2; |
| }; |
| |
| /** |
| * cfg80211_get_chandef_type - return old channel type from chandef |
| * @chandef: the channel definition |
| * |
| * Return: The old channel type (NOHT, HT20, HT40+/-) from a given |
| * chandef, which must have a bandwidth allowing this conversion. |
| */ |
| static inline enum nl80211_channel_type |
| cfg80211_get_chandef_type(const struct cfg80211_chan_def *chandef) |
| { |
| switch (chandef->width) { |
| case NL80211_CHAN_WIDTH_20_NOHT: |
| return NL80211_CHAN_NO_HT; |
| case NL80211_CHAN_WIDTH_20: |
| return NL80211_CHAN_HT20; |
| case NL80211_CHAN_WIDTH_40: |
| if (chandef->center_freq1 > chandef->chan->center_freq) |
| return NL80211_CHAN_HT40PLUS; |
| return NL80211_CHAN_HT40MINUS; |
| default: |
| WARN_ON(1); |
| return NL80211_CHAN_NO_HT; |
| } |
| } |
| |
| /** |
| * cfg80211_chandef_create - create channel definition using channel type |
| * @chandef: the channel definition struct to fill |
| * @channel: the control channel |
| * @chantype: the channel type |
| * |
| * Given a channel type, create a channel definition. |
| */ |
| void cfg80211_chandef_create(struct cfg80211_chan_def *chandef, |
| struct ieee80211_channel *channel, |
| enum nl80211_channel_type chantype); |
| |
| /** |
| * cfg80211_chandef_identical - check if two channel definitions are identical |
| * @chandef1: first channel definition |
| * @chandef2: second channel definition |
| * |
| * Return: %true if the channels defined by the channel definitions are |
| * identical, %false otherwise. |
| */ |
| static inline bool |
| cfg80211_chandef_identical(const struct cfg80211_chan_def *chandef1, |
| const struct cfg80211_chan_def *chandef2) |
| { |
| return (chandef1->chan == chandef2->chan && |
| chandef1->width == chandef2->width && |
| chandef1->center_freq1 == chandef2->center_freq1 && |
| chandef1->center_freq2 == chandef2->center_freq2); |
| } |
| |
| /** |
| * cfg80211_chandef_compatible - check if two channel definitions are compatible |
| * @chandef1: first channel definition |
| * @chandef2: second channel definition |
| * |
| * Return: %NULL if the given channel definitions are incompatible, |
| * chandef1 or chandef2 otherwise. |
| */ |
| const struct cfg80211_chan_def * |
| cfg80211_chandef_compatible(const struct cfg80211_chan_def *chandef1, |
| const struct cfg80211_chan_def *chandef2); |
| |
| /** |
| * cfg80211_chandef_valid - check if a channel definition is valid |
| * @chandef: the channel definition to check |
| * Return: %true if the channel definition is valid. %false otherwise. |
| */ |
| bool cfg80211_chandef_valid(const struct cfg80211_chan_def *chandef); |
| |
| /** |
| * cfg80211_chandef_usable - check if secondary channels can be used |
| * @wiphy: the wiphy to validate against |
| * @chandef: the channel definition to check |
| * @prohibited_flags: the regulatory channel flags that must not be set |
| * Return: %true if secondary channels are usable. %false otherwise. |
| */ |
| bool cfg80211_chandef_usable(struct wiphy *wiphy, |
| const struct cfg80211_chan_def *chandef, |
| u32 prohibited_flags); |
| |
| /** |
| * cfg80211_chandef_dfs_required - checks if radar detection is required |
| * @wiphy: the wiphy to validate against |
| * @chandef: the channel definition to check |
| * @iftype: the interface type as specified in &enum nl80211_iftype |
| * Returns: |
| * 1 if radar detection is required, 0 if it is not, < 0 on error |
| */ |
| int cfg80211_chandef_dfs_required(struct wiphy *wiphy, |
| const struct cfg80211_chan_def *chandef, |
| enum nl80211_iftype iftype); |
| |
| /** |
| * ieee80211_chandef_rate_flags - returns rate flags for a channel |
| * |
| * In some channel types, not all rates may be used - for example CCK |
| * rates may not be used in 5/10 MHz channels. |
| * |
| * @chandef: channel definition for the channel |
| * |
| * Returns: rate flags which apply for this channel |
| */ |
| static inline enum ieee80211_rate_flags |
| ieee80211_chandef_rate_flags(struct cfg80211_chan_def *chandef) |
| { |
| switch (chandef->width) { |
| case NL80211_CHAN_WIDTH_5: |
| return IEEE80211_RATE_SUPPORTS_5MHZ; |
| case NL80211_CHAN_WIDTH_10: |
| return IEEE80211_RATE_SUPPORTS_10MHZ; |
| default: |
| break; |
| } |
| return 0; |
| } |
| |
| /** |
| * ieee80211_chandef_max_power - maximum transmission power for the chandef |
| * |
| * In some regulations, the transmit power may depend on the configured channel |
| * bandwidth which may be defined as dBm/MHz. This function returns the actual |
| * max_power for non-standard (20 MHz) channels. |
| * |
| * @chandef: channel definition for the channel |
| * |
| * Returns: maximum allowed transmission power in dBm for the chandef |
| */ |
| static inline int |
| ieee80211_chandef_max_power(struct cfg80211_chan_def *chandef) |
| { |
| switch (chandef->width) { |
| case NL80211_CHAN_WIDTH_5: |
| return min(chandef->chan->max_reg_power - 6, |
| chandef->chan->max_power); |
| case NL80211_CHAN_WIDTH_10: |
| return min(chandef->chan->max_reg_power - 3, |
| chandef->chan->max_power); |
| default: |
| break; |
| } |
| return chandef->chan->max_power; |
| } |
| |
| /** |
| * enum survey_info_flags - survey information flags |
| * |
| * @SURVEY_INFO_NOISE_DBM: noise (in dBm) was filled in |
| * @SURVEY_INFO_IN_USE: channel is currently being used |
| * @SURVEY_INFO_TIME: active time (in ms) was filled in |
| * @SURVEY_INFO_TIME_BUSY: busy time was filled in |
| * @SURVEY_INFO_TIME_EXT_BUSY: extension channel busy time was filled in |
| * @SURVEY_INFO_TIME_RX: receive time was filled in |
| * @SURVEY_INFO_TIME_TX: transmit time was filled in |
| * @SURVEY_INFO_TIME_SCAN: scan time was filled in |
| * |
| * Used by the driver to indicate which info in &struct survey_info |
| * it has filled in during the get_survey(). |
| */ |
| enum survey_info_flags { |
| SURVEY_INFO_NOISE_DBM = BIT(0), |
| SURVEY_INFO_IN_USE = BIT(1), |
| SURVEY_INFO_TIME = BIT(2), |
| SURVEY_INFO_TIME_BUSY = BIT(3), |
| SURVEY_INFO_TIME_EXT_BUSY = BIT(4), |
| SURVEY_INFO_TIME_RX = BIT(5), |
| SURVEY_INFO_TIME_TX = BIT(6), |
| SURVEY_INFO_TIME_SCAN = BIT(7), |
| }; |
| |
| /** |
| * struct survey_info - channel survey response |
| * |
| * @channel: the channel this survey record reports, may be %NULL for a single |
| * record to report global statistics |
| * @filled: bitflag of flags from &enum survey_info_flags |
| * @noise: channel noise in dBm. This and all following fields are |
| * optional |
| * @time: amount of time in ms the radio was turn on (on the channel) |
| * @time_busy: amount of time the primary channel was sensed busy |
| * @time_ext_busy: amount of time the extension channel was sensed busy |
| * @time_rx: amount of time the radio spent receiving data |
| * @time_tx: amount of time the radio spent transmitting data |
| * @time_scan: amount of time the radio spent for scanning |
| * |
| * Used by dump_survey() to report back per-channel survey information. |
| * |
| * This structure can later be expanded with things like |
| * channel duty cycle etc. |
| */ |
| struct survey_info { |
| struct ieee80211_channel *channel; |
| u64 time; |
| u64 time_busy; |
| u64 time_ext_busy; |
| u64 time_rx; |
| u64 time_tx; |
| u64 time_scan; |
| u32 filled; |
| s8 noise; |
| }; |
| |
| #define CFG80211_MAX_WEP_KEYS 4 |
| |
| /** |
| * struct cfg80211_crypto_settings - Crypto settings |
| * @wpa_versions: indicates which, if any, WPA versions are enabled |
| * (from enum nl80211_wpa_versions) |
| * @cipher_group: group key cipher suite (or 0 if unset) |
| * @n_ciphers_pairwise: number of AP supported unicast ciphers |
| * @ciphers_pairwise: unicast key cipher suites |
| * @n_akm_suites: number of AKM suites |
| * @akm_suites: AKM suites |
| * @control_port: Whether user space controls IEEE 802.1X port, i.e., |
| * sets/clears %NL80211_STA_FLAG_AUTHORIZED. If true, the driver is |
| * required to assume that the port is unauthorized until authorized by |
| * user space. Otherwise, port is marked authorized by default. |
| * @control_port_ethertype: the control port protocol that should be |
| * allowed through even on unauthorized ports |
| * @control_port_no_encrypt: TRUE to prevent encryption of control port |
| * protocol frames. |
| * @wep_keys: static WEP keys, if not NULL points to an array of |
| * CFG80211_MAX_WEP_KEYS WEP keys |
| * @wep_tx_key: key index (0..3) of the default TX static WEP key |
| * @psk: PSK (for devices supporting 4-way-handshake offload) |
| */ |
| struct cfg80211_crypto_settings { |
| u32 wpa_versions; |
| u32 cipher_group; |
| int n_ciphers_pairwise; |
| u32 ciphers_pairwise[NL80211_MAX_NR_CIPHER_SUITES]; |
| int n_akm_suites; |
| u32 akm_suites[NL80211_MAX_NR_AKM_SUITES]; |
| bool control_port; |
| __be16 control_port_ethertype; |
| bool control_port_no_encrypt; |
| struct key_params *wep_keys; |
| int wep_tx_key; |
| const u8 *psk; |
| }; |
| |
| /** |
| * struct cfg80211_beacon_data - beacon data |
| * @head: head portion of beacon (before TIM IE) |
| * or %NULL if not changed |
| * @tail: tail portion of beacon (after TIM IE) |
| * or %NULL if not changed |
| * @head_len: length of @head |
| * @tail_len: length of @tail |
| * @beacon_ies: extra information element(s) to add into Beacon frames or %NULL |
| * @beacon_ies_len: length of beacon_ies in octets |
| * @proberesp_ies: extra information element(s) to add into Probe Response |
| * frames or %NULL |
| * @proberesp_ies_len: length of proberesp_ies in octets |
| * @assocresp_ies: extra information element(s) to add into (Re)Association |
| * Response frames or %NULL |
| * @assocresp_ies_len: length of assocresp_ies in octets |
| * @probe_resp_len: length of probe response template (@probe_resp) |
| * @probe_resp: probe response template (AP mode only) |
| */ |
| struct cfg80211_beacon_data { |
| const u8 *head, *tail; |
| const u8 *beacon_ies; |
| const u8 *proberesp_ies; |
| const u8 *assocresp_ies; |
| const u8 *probe_resp; |
| |
| size_t head_len, tail_len; |
| size_t beacon_ies_len; |
| size_t proberesp_ies_len; |
| size_t assocresp_ies_len; |
| size_t probe_resp_len; |
| }; |
| |
| struct mac_address { |
| u8 addr[ETH_ALEN]; |
| }; |
| |
| /** |
| * struct cfg80211_acl_data - Access control list data |
| * |
| * @acl_policy: ACL policy to be applied on the station's |
| * entry specified by mac_addr |
| * @n_acl_entries: Number of MAC address entries passed |
| * @mac_addrs: List of MAC addresses of stations to be used for ACL |
| */ |
| struct cfg80211_acl_data { |
| enum nl80211_acl_policy acl_policy; |
| int n_acl_entries; |
| |
| /* Keep it last */ |
| struct mac_address mac_addrs[]; |
| }; |
| |
| /* |
| * cfg80211_bitrate_mask - masks for bitrate control |
| */ |
| struct cfg80211_bitrate_mask { |
| struct { |
| u32 legacy; |
| u8 ht_mcs[IEEE80211_HT_MCS_MASK_LEN]; |
| u16 vht_mcs[NL80211_VHT_NSS_MAX]; |
| enum nl80211_txrate_gi gi; |
| } control[NUM_NL80211_BANDS]; |
| }; |
| |
| /** |
| * struct cfg80211_ap_settings - AP configuration |
| * |
| * Used to configure an AP interface. |
| * |
| * @chandef: defines the channel to use |
| * @beacon: beacon data |
| * @beacon_interval: beacon interval |
| * @dtim_period: DTIM period |
| * @ssid: SSID to be used in the BSS (note: may be %NULL if not provided from |
| * user space) |
| * @ssid_len: length of @ssid |
| * @hidden_ssid: whether to hide the SSID in Beacon/Probe Response frames |
| * @crypto: crypto settings |
| * @privacy: the BSS uses privacy |
| * @auth_type: Authentication type (algorithm) |
| * @smps_mode: SMPS mode |
| * @inactivity_timeout: time in seconds to determine station's inactivity. |
| * @p2p_ctwindow: P2P CT Window |
| * @p2p_opp_ps: P2P opportunistic PS |
| * @acl: ACL configuration used by the drivers which has support for |
| * MAC address based access control |
| * @pbss: If set, start as a PCP instead of AP. Relevant for DMG |
| * networks. |
| * @beacon_rate: bitrate to be used for beacons |
| * @ht_cap: HT capabilities (or %NULL if HT isn't enabled) |
| * @vht_cap: VHT capabilities (or %NULL if VHT isn't enabled) |
| * @ht_required: stations must support HT |
| * @vht_required: stations must support VHT |
| */ |
| struct cfg80211_ap_settings { |
| struct cfg80211_chan_def chandef; |
| |
| struct cfg80211_beacon_data beacon; |
| |
| int beacon_interval, dtim_period; |
| const u8 *ssid; |
| size_t ssid_len; |
| enum nl80211_hidden_ssid hidden_ssid; |
| struct cfg80211_crypto_settings crypto; |
| bool privacy; |
| enum nl80211_auth_type auth_type; |
| enum nl80211_smps_mode smps_mode; |
| int inactivity_timeout; |
| u8 p2p_ctwindow; |
| bool p2p_opp_ps; |
| const struct cfg80211_acl_data *acl; |
| bool pbss; |
| struct cfg80211_bitrate_mask beacon_rate; |
| |
| const struct ieee80211_ht_cap *ht_cap; |
| const struct ieee80211_vht_cap *vht_cap; |
| bool ht_required, vht_required; |
| }; |
| |
| /** |
| * struct cfg80211_csa_settings - channel switch settings |
| * |
| * Used for channel switch |
| * |
| * @chandef: defines the channel to use after the switch |
| * @beacon_csa: beacon data while performing the switch |
| * @counter_offsets_beacon: offsets of the counters within the beacon (tail) |
| * @counter_offsets_presp: offsets of the counters within the probe response |
| * @n_counter_offsets_beacon: number of csa counters the beacon (tail) |
| * @n_counter_offsets_presp: number of csa counters in the probe response |
| * @beacon_after: beacon data to be used on the new channel |
| * @radar_required: whether radar detection is required on the new channel |
| * @block_tx: whether transmissions should be blocked while changing |
| * @count: number of beacons until switch |
| */ |
| struct cfg80211_csa_settings { |
| struct cfg80211_chan_def chandef; |
| struct cfg80211_beacon_data beacon_csa; |
| const u16 *counter_offsets_beacon; |
| const u16 *counter_offsets_presp; |
| unsigned int n_counter_offsets_beacon; |
| unsigned int n_counter_offsets_presp; |
| struct cfg80211_beacon_data beacon_after; |
| bool radar_required; |
| bool block_tx; |
| u8 count; |
| }; |
| |
| /** |
| * struct iface_combination_params - input parameters for interface combinations |
| * |
| * Used to pass interface combination parameters |
| * |
| * @num_different_channels: the number of different channels we want |
| * to use for verification |
| * @radar_detect: a bitmap where each bit corresponds to a channel |
| * width where radar detection is needed, as in the definition of |
| * &struct ieee80211_iface_combination.@radar_detect_widths |
| * @iftype_num: array with the number of interfaces of each interface |
| * type. The index is the interface type as specified in &enum |
| * nl80211_iftype. |
| * @new_beacon_int: set this to the beacon interval of a new interface |
| * that's not operating yet, if such is to be checked as part of |
| * the verification |
| */ |
| struct iface_combination_params { |
| int num_different_channels; |
| u8 radar_detect; |
| int iftype_num[NUM_NL80211_IFTYPES]; |
| u32 new_beacon_int; |
| }; |
| |
| /** |
| * enum station_parameters_apply_mask - station parameter values to apply |
| * @STATION_PARAM_APPLY_UAPSD: apply new uAPSD parameters (uapsd_queues, max_sp) |
| * @STATION_PARAM_APPLY_CAPABILITY: apply new capability |
| * @STATION_PARAM_APPLY_PLINK_STATE: apply new plink state |
| * |
| * Not all station parameters have in-band "no change" signalling, |
| * for those that don't these flags will are used. |
| */ |
| enum station_parameters_apply_mask { |
| STATION_PARAM_APPLY_UAPSD = BIT(0), |
| STATION_PARAM_APPLY_CAPABILITY = BIT(1), |
| STATION_PARAM_APPLY_PLINK_STATE = BIT(2), |
| }; |
| |
| /** |
| * struct station_parameters - station parameters |
| * |
| * Used to change and create a new station. |
| * |
| * @vlan: vlan interface station should belong to |
| * @supported_rates: supported rates in IEEE 802.11 format |
| * (or NULL for no change) |
| * @supported_rates_len: number of supported rates |
| * @sta_flags_mask: station flags that changed |
| * (bitmask of BIT(%NL80211_STA_FLAG_...)) |
| * @sta_flags_set: station flags values |
| * (bitmask of BIT(%NL80211_STA_FLAG_...)) |
| * @listen_interval: listen interval or -1 for no change |
| * @aid: AID or zero for no change |
| * @peer_aid: mesh peer AID or zero for no change |
| * @plink_action: plink action to take |
| * @plink_state: set the peer link state for a station |
| * @ht_capa: HT capabilities of station |
| * @vht_capa: VHT capabilities of station |
| * @uapsd_queues: bitmap of queues configured for uapsd. same format |
| * as the AC bitmap in the QoS info field |
| * @max_sp: max Service Period. same format as the MAX_SP in the |
| * QoS info field (but already shifted down) |
| * @sta_modify_mask: bitmap indicating which parameters changed |
| * (for those that don't have a natural "no change" value), |
| * see &enum station_parameters_apply_mask |
| * @local_pm: local link-specific mesh power save mode (no change when set |
| * to unknown) |
| * @capability: station capability |
| * @ext_capab: extended capabilities of the station |
| * @ext_capab_len: number of extended capabilities |
| * @supported_channels: supported channels in IEEE 802.11 format |
| * @supported_channels_len: number of supported channels |
| * @supported_oper_classes: supported oper classes in IEEE 802.11 format |
| * @supported_oper_classes_len: number of supported operating classes |
| * @opmode_notif: operating mode field from Operating Mode Notification |
| * @opmode_notif_used: information if operating mode field is used |
| * @support_p2p_ps: information if station supports P2P PS mechanism |
| */ |
| struct station_parameters { |
| const u8 *supported_rates; |
| struct net_device *vlan; |
| u32 sta_flags_mask, sta_flags_set; |
| u32 sta_modify_mask; |
| int listen_interval; |
| u16 aid; |
| u16 peer_aid; |
| u8 supported_rates_len; |
| u8 plink_action; |
| u8 plink_state; |
| const struct ieee80211_ht_cap *ht_capa; |
| const struct ieee80211_vht_cap *vht_capa; |
| u8 uapsd_queues; |
| u8 max_sp; |
| enum nl80211_mesh_power_mode local_pm; |
| u16 capability; |
| const u8 *ext_capab; |
| u8 ext_capab_len; |
| const u8 *supported_channels; |
| u8 supported_channels_len; |
| const u8 *supported_oper_classes; |
| u8 supported_oper_classes_len; |
| u8 opmode_notif; |
| bool opmode_notif_used; |
| int support_p2p_ps; |
| }; |
| |
| /** |
| * struct station_del_parameters - station deletion parameters |
| * |
| * Used to delete a station entry (or all stations). |
| * |
| * @mac: MAC address of the station to remove or NULL to remove all stations |
| * @subtype: Management frame subtype to use for indicating removal |
| * (10 = Disassociation, 12 = Deauthentication) |
| * @reason_code: Reason code for the Disassociation/Deauthentication frame |
| */ |
| struct station_del_parameters { |
| const u8 *mac; |
| u8 subtype; |
| u16 reason_code; |
| }; |
| |
| /** |
| * enum cfg80211_station_type - the type of station being modified |
| * @CFG80211_STA_AP_CLIENT: client of an AP interface |
| * @CFG80211_STA_AP_CLIENT_UNASSOC: client of an AP interface that is still |
| * unassociated (update properties for this type of client is permitted) |
| * @CFG80211_STA_AP_MLME_CLIENT: client of an AP interface that has |
| * the AP MLME in the device |
| * @CFG80211_STA_AP_STA: AP station on managed interface |
| * @CFG80211_STA_IBSS: IBSS station |
| * @CFG80211_STA_TDLS_PEER_SETUP: TDLS peer on managed interface (dummy entry |
| * while TDLS setup is in progress, it moves out of this state when |
| * being marked authorized; use this only if TDLS with external setup is |
| * supported/used) |
| * @CFG80211_STA_TDLS_PEER_ACTIVE: TDLS peer on managed interface (active |
| * entry that is operating, has been marked authorized by userspace) |
| * @CFG80211_STA_MESH_PEER_KERNEL: peer on mesh interface (kernel managed) |
| * @CFG80211_STA_MESH_PEER_USER: peer on mesh interface (user managed) |
| */ |
| enum cfg80211_station_type { |
| CFG80211_STA_AP_CLIENT, |
| CFG80211_STA_AP_CLIENT_UNASSOC, |
| CFG80211_STA_AP_MLME_CLIENT, |
| CFG80211_STA_AP_STA, |
| CFG80211_STA_IBSS, |
| CFG80211_STA_TDLS_PEER_SETUP, |
| CFG80211_STA_TDLS_PEER_ACTIVE, |
| CFG80211_STA_MESH_PEER_KERNEL, |
| CFG80211_STA_MESH_PEER_USER, |
| }; |
| |
| /** |
| * cfg80211_check_station_change - validate parameter changes |
| * @wiphy: the wiphy this operates on |
| * @params: the new parameters for a station |
| * @statype: the type of station being modified |
| * |
| * Utility function for the @change_station driver method. Call this function |
| * with the appropriate station type looking up the station (and checking that |
| * it exists). It will verify whether the station change is acceptable, and if |
| * not will return an error code. Note that it may modify the parameters for |
| * backward compatibility reasons, so don't use them before calling this. |
| */ |
| int cfg80211_check_station_change(struct wiphy *wiphy, |
| struct station_parameters *params, |
| enum cfg80211_station_type statype); |
| |
| /** |
| * enum station_info_rate_flags - bitrate info flags |
| * |
| * Used by the driver to indicate the specific rate transmission |
| * type for 802.11n transmissions. |
| * |
| * @RATE_INFO_FLAGS_MCS: mcs field filled with HT MCS |
| * @RATE_INFO_FLAGS_VHT_MCS: mcs field filled with VHT MCS |
| * @RATE_INFO_FLAGS_SHORT_GI: 400ns guard interval |
| * @RATE_INFO_FLAGS_60G: 60GHz MCS |
| */ |
| enum rate_info_flags { |
| RATE_INFO_FLAGS_MCS = BIT(0), |
| RATE_INFO_FLAGS_VHT_MCS = BIT(1), |
| RATE_INFO_FLAGS_SHORT_GI = BIT(2), |
| RATE_INFO_FLAGS_60G = BIT(3), |
| }; |
| |
| /** |
| * enum rate_info_bw - rate bandwidth information |
| * |
| * Used by the driver to indicate the rate bandwidth. |
| * |
| * @RATE_INFO_BW_5: 5 MHz bandwidth |
| * @RATE_INFO_BW_10: 10 MHz bandwidth |
| * @RATE_INFO_BW_20: 20 MHz bandwidth |
| * @RATE_INFO_BW_40: 40 MHz bandwidth |
| * @RATE_INFO_BW_80: 80 MHz bandwidth |
| * @RATE_INFO_BW_160: 160 MHz bandwidth |
| */ |
| enum rate_info_bw { |
| RATE_INFO_BW_20 = 0, |
| RATE_INFO_BW_5, |
| RATE_INFO_BW_10, |
| RATE_INFO_BW_40, |
| RATE_INFO_BW_80, |
| RATE_INFO_BW_160, |
| }; |
| |
| /** |
| * struct rate_info - bitrate information |
| * |
| * Information about a receiving or transmitting bitrate |
| * |
| * @flags: bitflag of flags from &enum rate_info_flags |
| * @mcs: mcs index if struct describes a 802.11n bitrate |
| * @legacy: bitrate in 100kbit/s for 802.11abg |
| * @nss: number of streams (VHT only) |
| * @bw: bandwidth (from &enum rate_info_bw) |
| */ |
| struct rate_info { |
| u8 flags; |
| u8 mcs; |
| u16 legacy; |
| u8 nss; |
| u8 bw; |
| }; |
| |
| /** |
| * enum station_info_rate_flags - bitrate info flags |
| * |
| * Used by the driver to indicate the specific rate transmission |
| * type for 802.11n transmissions. |
| * |
| * @BSS_PARAM_FLAGS_CTS_PROT: whether CTS protection is enabled |
| * @BSS_PARAM_FLAGS_SHORT_PREAMBLE: whether short preamble is enabled |
| * @BSS_PARAM_FLAGS_SHORT_SLOT_TIME: whether short slot time is enabled |
| */ |
| enum bss_param_flags { |
| BSS_PARAM_FLAGS_CTS_PROT = 1<<0, |
| BSS_PARAM_FLAGS_SHORT_PREAMBLE = 1<<1, |
| BSS_PARAM_FLAGS_SHORT_SLOT_TIME = 1<<2, |
| }; |
| |
| /** |
| * struct sta_bss_parameters - BSS parameters for the attached station |
| * |
| * Information about the currently associated BSS |
| * |
| * @flags: bitflag of flags from &enum bss_param_flags |
| * @dtim_period: DTIM period for the BSS |
| * @beacon_interval: beacon interval |
| */ |
| struct sta_bss_parameters { |
| u8 flags; |
| u8 dtim_period; |
| u16 beacon_interval; |
| }; |
| |
| /** |
| * struct cfg80211_tid_stats - per-TID statistics |
| * @filled: bitmap of flags using the bits of &enum nl80211_tid_stats to |
| * indicate the relevant values in this struct are filled |
| * @rx_msdu: number of received MSDUs |
| * @tx_msdu: number of (attempted) transmitted MSDUs |
| * @tx_msdu_retries: number of retries (not counting the first) for |
| * transmitted MSDUs |
| * @tx_msdu_failed: number of failed transmitted MSDUs |
| */ |
| struct cfg80211_tid_stats { |
| u32 filled; |
| u64 rx_msdu; |
| u64 tx_msdu; |
| u64 tx_msdu_retries; |
| u64 tx_msdu_failed; |
| }; |
| |
| #define IEEE80211_MAX_CHAINS 4 |
| |
| /** |
| * struct station_info - station information |
| * |
| * Station information filled by driver for get_station() and dump_station. |
| * |
| * @filled: bitflag of flags using the bits of &enum nl80211_sta_info to |
| * indicate the relevant values in this struct for them |
| * @connected_time: time(in secs) since a station is last connected |
| * @inactive_time: time since last station activity (tx/rx) in milliseconds |
| * @rx_bytes: bytes (size of MPDUs) received from this station |
| * @tx_bytes: bytes (size of MPDUs) transmitted to this station |
| * @llid: mesh local link id |
| * @plid: mesh peer link id |
| * @plink_state: mesh peer link state |
| * @signal: The signal strength, type depends on the wiphy's signal_type. |
| * For CFG80211_SIGNAL_TYPE_MBM, value is expressed in _dBm_. |
| * @signal_avg: Average signal strength, type depends on the wiphy's signal_type. |
| * For CFG80211_SIGNAL_TYPE_MBM, value is expressed in _dBm_. |
| * @chains: bitmask for filled values in @chain_signal, @chain_signal_avg |
| * @chain_signal: per-chain signal strength of last received packet in dBm |
| * @chain_signal_avg: per-chain signal strength average in dBm |
| * @txrate: current unicast bitrate from this station |
| * @rxrate: current unicast bitrate to this station |
| * @rx_packets: packets (MSDUs & MMPDUs) received from this station |
| * @tx_packets: packets (MSDUs & MMPDUs) transmitted to this station |
| * @tx_retries: cumulative retry counts (MPDUs) |
| * @tx_failed: number of failed transmissions (MPDUs) (retries exceeded, no ACK) |
| * @rx_dropped_misc: Dropped for un-specified reason. |
| * @bss_param: current BSS parameters |
| * @generation: generation number for nl80211 dumps. |
| * This number should increase every time the list of stations |
| * changes, i.e. when a station is added or removed, so that |
| * userspace can tell whether it got a consistent snapshot. |
| * @assoc_req_ies: IEs from (Re)Association Request. |
| * This is used only when in AP mode with drivers that do not use |
| * user space MLME/SME implementation. The information is provided for |
| * the cfg80211_new_sta() calls to notify user space of the IEs. |
| * @assoc_req_ies_len: Length of assoc_req_ies buffer in octets. |
| * @sta_flags: station flags mask & values |
| * @beacon_loss_count: Number of times beacon loss event has triggered. |
| * @t_offset: Time offset of the station relative to this host. |
| * @local_pm: local mesh STA power save mode |
| * @peer_pm: peer mesh STA power save mode |
| * @nonpeer_pm: non-peer mesh STA power save mode |
| * @expected_throughput: expected throughput in kbps (including 802.11 headers) |
| * towards this station. |
| * @rx_beacon: number of beacons received from this peer |
| * @rx_beacon_signal_avg: signal strength average (in dBm) for beacons received |
| * from this peer |
| * @rx_duration: aggregate PPDU duration(usecs) for all the frames from a peer |
| * @pertid: per-TID statistics, see &struct cfg80211_tid_stats, using the last |
| * (IEEE80211_NUM_TIDS) index for MSDUs not encapsulated in QoS-MPDUs. |
| */ |
| struct station_info { |
| u64 filled; |
| u32 connected_time; |
| u32 inactive_time; |
| u64 rx_bytes; |
| u64 tx_bytes; |
| u16 llid; |
| u16 plid; |
| u8 plink_state; |
| s8 signal; |
| s8 signal_avg; |
| |
| u8 chains; |
| s8 chain_signal[IEEE80211_MAX_CHAINS]; |
| s8 chain_signal_avg[IEEE80211_MAX_CHAINS]; |
| |
| struct rate_info txrate; |
| struct rate_info rxrate; |
| u32 rx_packets; |
| u32 tx_packets; |
| u32 tx_retries; |
| u32 tx_failed; |
| u32 rx_dropped_misc; |
| struct sta_bss_parameters bss_param; |
| struct nl80211_sta_flag_update sta_flags; |
| |
| int generation; |
| |
| const u8 *assoc_req_ies; |
| size_t assoc_req_ies_len; |
| |
| u32 beacon_loss_count; |
| s64 t_offset; |
| enum nl80211_mesh_power_mode local_pm; |
| enum nl80211_mesh_power_mode peer_pm; |
| enum nl80211_mesh_power_mode nonpeer_pm; |
| |
| u32 expected_throughput; |
| |
| u64 rx_beacon; |
| u64 rx_duration; |
| u8 rx_beacon_signal_avg; |
| struct cfg80211_tid_stats pertid[IEEE80211_NUM_TIDS + 1]; |
| }; |
| |
| #if IS_ENABLED(CONFIG_CFG80211) |
| /** |
| * cfg80211_get_station - retrieve information about a given station |
| * @dev: the device where the station is supposed to be connected to |
| * @mac_addr: the mac address of the station of interest |
| * @sinfo: pointer to the structure to fill with the information |
| * |
| * Returns 0 on success and sinfo is filled with the available information |
| * otherwise returns a negative error code and the content of sinfo has to be |
| * considered undefined. |
| */ |
| int cfg80211_get_station(struct net_device *dev, const u8 *mac_addr, |
| struct station_info *sinfo); |
| #else |
| static inline int cfg80211_get_station(struct net_device *dev, |
| const u8 *mac_addr, |
| struct station_info *sinfo) |
| { |
| return -ENOENT; |
| } |
| #endif |
| |
| /** |
| * enum monitor_flags - monitor flags |
| * |
| * Monitor interface configuration flags. Note that these must be the bits |
| * according to the nl80211 flags. |
| * |
| * @MONITOR_FLAG_CHANGED: set if the flags were changed |
| * @MONITOR_FLAG_FCSFAIL: pass frames with bad FCS |
| * @MONITOR_FLAG_PLCPFAIL: pass frames with bad PLCP |
| * @MONITOR_FLAG_CONTROL: pass control frames |
| * @MONITOR_FLAG_OTHER_BSS: disable BSSID filtering |
| * @MONITOR_FLAG_COOK_FRAMES: report frames after processing |
| * @MONITOR_FLAG_ACTIVE: active monitor, ACKs frames on its MAC address |
| */ |
| enum monitor_flags { |
| MONITOR_FLAG_CHANGED = 1<<__NL80211_MNTR_FLAG_INVALID, |
| MONITOR_FLAG_FCSFAIL = 1<<NL80211_MNTR_FLAG_FCSFAIL, |
| MONITOR_FLAG_PLCPFAIL = 1<<NL80211_MNTR_FLAG_PLCPFAIL, |
| MONITOR_FLAG_CONTROL = 1<<NL80211_MNTR_FLAG_CONTROL, |
| MONITOR_FLAG_OTHER_BSS = 1<<NL80211_MNTR_FLAG_OTHER_BSS, |
| MONITOR_FLAG_COOK_FRAMES = 1<<NL80211_MNTR_FLAG_COOK_FRAMES, |
| MONITOR_FLAG_ACTIVE = 1<<NL80211_MNTR_FLAG_ACTIVE, |
| }; |
| |
| /** |
| * enum mpath_info_flags - mesh path information flags |
| * |
| * Used by the driver to indicate which info in &struct mpath_info it has filled |
| * in during get_station() or dump_station(). |
| * |
| * @MPATH_INFO_FRAME_QLEN: @frame_qlen filled |
| * @MPATH_INFO_SN: @sn filled |
| * @MPATH_INFO_METRIC: @metric filled |
| * @MPATH_INFO_EXPTIME: @exptime filled |
| * @MPATH_INFO_DISCOVERY_TIMEOUT: @discovery_timeout filled |
| * @MPATH_INFO_DISCOVERY_RETRIES: @discovery_retries filled |
| * @MPATH_INFO_FLAGS: @flags filled |
| */ |
| enum mpath_info_flags { |
| MPATH_INFO_FRAME_QLEN = BIT(0), |
| MPATH_INFO_SN = BIT(1), |
| MPATH_INFO_METRIC = BIT(2), |
| MPATH_INFO_EXPTIME = BIT(3), |
| MPATH_INFO_DISCOVERY_TIMEOUT = BIT(4), |
| MPATH_INFO_DISCOVERY_RETRIES = BIT(5), |
| MPATH_INFO_FLAGS = BIT(6), |
| }; |
| |
| /** |
| * struct mpath_info - mesh path information |
| * |
| * Mesh path information filled by driver for get_mpath() and dump_mpath(). |
| * |
| * @filled: bitfield of flags from &enum mpath_info_flags |
| * @frame_qlen: number of queued frames for this destination |
| * @sn: target sequence number |
| * @metric: metric (cost) of this mesh path |
| * @exptime: expiration time for the mesh path from now, in msecs |
| * @flags: mesh path flags |
| * @discovery_timeout: total mesh path discovery timeout, in msecs |
| * @discovery_retries: mesh path discovery retries |
| * @generation: generation number for nl80211 dumps. |
| * This number should increase every time the list of mesh paths |
| * changes, i.e. when a station is added or removed, so that |
| * userspace can tell whether it got a consistent snapshot. |
| */ |
| struct mpath_info { |
| u32 filled; |
| u32 frame_qlen; |
| u32 sn; |
| u32 metric; |
| u32 exptime; |
| u32 discovery_timeout; |
| u8 discovery_retries; |
| u8 flags; |
| |
| int generation; |
| }; |
| |
| /** |
| * struct bss_parameters - BSS parameters |
| * |
| * Used to change BSS parameters (mainly for AP mode). |
| * |
| * @use_cts_prot: Whether to use CTS protection |
| * (0 = no, 1 = yes, -1 = do not change) |
| * @use_short_preamble: Whether the use of short preambles is allowed |
| * (0 = no, 1 = yes, -1 = do not change) |
| * @use_short_slot_time: Whether the use of short slot time is allowed |
| * (0 = no, 1 = yes, -1 = do not change) |
| * @basic_rates: basic rates in IEEE 802.11 format |
| * (or NULL for no change) |
| * @basic_rates_len: number of basic rates |
| * @ap_isolate: do not forward packets between connected stations |
| * @ht_opmode: HT Operation mode |
| * (u16 = opmode, -1 = do not change) |
| * @p2p_ctwindow: P2P CT Window (-1 = no change) |
| * @p2p_opp_ps: P2P opportunistic PS (-1 = no change) |
| */ |
| struct bss_parameters { |
| int use_cts_prot; |
| int use_short_preamble; |
| int use_short_slot_time; |
| const u8 *basic_rates; |
| u8 basic_rates_len; |
| int ap_isolate; |
| int ht_opmode; |
| s8 p2p_ctwindow, p2p_opp_ps; |
| }; |
| |
| /** |
| * struct mesh_config - 802.11s mesh configuration |
| * |
| * These parameters can be changed while the mesh is active. |
| * |
| * @dot11MeshRetryTimeout: the initial retry timeout in millisecond units used |
| * by the Mesh Peering Open message |
| * @dot11MeshConfirmTimeout: the initial retry timeout in millisecond units |
| * used by the Mesh Peering Open message |
| * @dot11MeshHoldingTimeout: the confirm timeout in millisecond units used by |
| * the mesh peering management to close a mesh peering |
| * @dot11MeshMaxPeerLinks: the maximum number of peer links allowed on this |
| * mesh interface |
| * @dot11MeshMaxRetries: the maximum number of peer link open retries that can |
| * be sent to establish a new peer link instance in a mesh |
| * @dot11MeshTTL: the value of TTL field set at a source mesh STA |
| * @element_ttl: the value of TTL field set at a mesh STA for path selection |
| * elements |
| * @auto_open_plinks: whether we should automatically open peer links when we |
| * detect compatible mesh peers |
| * @dot11MeshNbrOffsetMaxNeighbor: the maximum number of neighbors to |
| * synchronize to for 11s default synchronization method |
| * @dot11MeshHWMPmaxPREQretries: the number of action frames containing a PREQ |
| * that an originator mesh STA can send to a particular path target |
| * @path_refresh_time: how frequently to refresh mesh paths in milliseconds |
| * @min_discovery_timeout: the minimum length of time to wait until giving up on |
| * a path discovery in milliseconds |
| * @dot11MeshHWMPactivePathTimeout: the time (in TUs) for which mesh STAs |
| * receiving a PREQ shall consider the forwarding information from the |
| * root to be valid. (TU = time unit) |
| * @dot11MeshHWMPpreqMinInterval: the minimum interval of time (in TUs) during |
| * which a mesh STA can send only one action frame containing a PREQ |
| * element |
| * @dot11MeshHWMPperrMinInterval: the minimum interval of time (in TUs) during |
| * which a mesh STA can send only one Action frame containing a PERR |
| * element |
| * @dot11MeshHWMPnetDiameterTraversalTime: the interval of time (in TUs) that |
| * it takes for an HWMP information element to propagate across the mesh |
| * @dot11MeshHWMPRootMode: the configuration of a mesh STA as root mesh STA |
| * @dot11MeshHWMPRannInterval: the interval of time (in TUs) between root |
| * announcements are transmitted |
| * @dot11MeshGateAnnouncementProtocol: whether to advertise that this mesh |
| * station has access to a broader network beyond the MBSS. (This is |
| * missnamed in draft 12.0: dot11MeshGateAnnouncementProtocol set to true |
| * only means that the station will announce others it's a mesh gate, but |
| * not necessarily using the gate announcement protocol. Still keeping the |
| * same nomenclature to be in sync with the spec) |
| * @dot11MeshForwarding: whether the Mesh STA is forwarding or non-forwarding |
| * entity (default is TRUE - forwarding entity) |
| * @rssi_threshold: the threshold for average signal strength of candidate |
| * station to establish a peer link |
| * @ht_opmode: mesh HT protection mode |
| * |
| * @dot11MeshHWMPactivePathToRootTimeout: The time (in TUs) for which mesh STAs |
| * receiving a proactive PREQ shall consider the forwarding information to |
| * the root mesh STA to be valid. |
| * |
| * @dot11MeshHWMProotInterval: The interval of time (in TUs) between proactive |
| * PREQs are transmitted. |
| * @dot11MeshHWMPconfirmationInterval: The minimum interval of time (in TUs) |
| * during which a mesh STA can send only one Action frame containing |
| * a PREQ element for root path confirmation. |
| * @power_mode: The default mesh power save mode which will be the initial |
| * setting for new peer links. |
| * @dot11MeshAwakeWindowDuration: The duration in TUs the STA will remain awake |
| * after transmitting its beacon. |
| * @plink_timeout: If no tx activity is seen from a STA we've established |
| * peering with for longer than this time (in seconds), then remove it |
| * from the STA's list of peers. Default is 30 minutes. |
| */ |
| struct mesh_config { |
| u16 dot11MeshRetryTimeout; |
| u16 dot11MeshConfirmTimeout; |
| u16 dot11MeshHoldingTimeout; |
| u16 dot11MeshMaxPeerLinks; |
| u8 dot11MeshMaxRetries; |
| u8 dot11MeshTTL; |
| u8 element_ttl; |
| bool auto_open_plinks; |
| u32 dot11MeshNbrOffsetMaxNeighbor; |
| u8 dot11MeshHWMPmaxPREQretries; |
| u32 path_refresh_time; |
| u16 min_discovery_timeout; |
| u32 dot11MeshHWMPactivePathTimeout; |
| u16 dot11MeshHWMPpreqMinInterval; |
| u16 dot11MeshHWMPperrMinInterval; |
| u16 dot11MeshHWMPnetDiameterTraversalTime; |
| u8 dot11MeshHWMPRootMode; |
| u16 dot11MeshHWMPRannInterval; |
| bool dot11MeshGateAnnouncementProtocol; |
| bool dot11MeshForwarding; |
| s32 rssi_threshold; |
| u16 ht_opmode; |
| u32 dot11MeshHWMPactivePathToRootTimeout; |
| u16 dot11MeshHWMProotInterval; |
| u16 dot11MeshHWMPconfirmationInterval; |
| enum nl80211_mesh_power_mode power_mode; |
| u16 dot11MeshAwakeWindowDuration; |
| u32 plink_timeout; |
| }; |
| |
| /** |
| * struct mesh_setup - 802.11s mesh setup configuration |
| * @chandef: defines the channel to use |
| * @mesh_id: the mesh ID |
| * @mesh_id_len: length of the mesh ID, at least 1 and at most 32 bytes |
| * @sync_method: which synchronization method to use |
| * @path_sel_proto: which path selection protocol to use |
| * @path_metric: which metric to use |
| * @auth_id: which authentication method this mesh is using |
| * @ie: vendor information elements (optional) |
| * @ie_len: length of vendor information elements |
| * @is_authenticated: this mesh requires authentication |
| * @is_secure: this mesh uses security |
| * @user_mpm: userspace handles all MPM functions |
| * @dtim_period: DTIM period to use |
| * @beacon_interval: beacon interval to use |
| * @mcast_rate: multicat rate for Mesh Node [6Mbps is the default for 802.11a] |
| * @basic_rates: basic rates to use when creating the mesh |
| * @beacon_rate: bitrate to be used for beacons |
| * @userspace_handles_dfs: whether user space controls DFS operation, i.e. |
| * changes the channel when a radar is detected. This is required |
| * to operate on DFS channels. |
| * |
| * These parameters are fixed when the mesh is created. |
| */ |
| struct mesh_setup { |
| struct cfg80211_chan_def chandef; |
| const u8 *mesh_id; |
| u8 mesh_id_len; |
| u8 sync_method; |
| u8 path_sel_proto; |
| u8 path_metric; |
| u8 auth_id; |
| const u8 *ie; |
| u8 ie_len; |
| bool is_authenticated; |
| bool is_secure; |
| bool user_mpm; |
| u8 dtim_period; |
| u16 beacon_interval; |
| int mcast_rate[NUM_NL80211_BANDS]; |
| u32 basic_rates; |
| struct cfg80211_bitrate_mask beacon_rate; |
| bool userspace_handles_dfs; |
| }; |
| |
| /** |
| * struct ocb_setup - 802.11p OCB mode setup configuration |
| * @chandef: defines the channel to use |
| * |
| * These parameters are fixed when connecting to the network |
| */ |
| struct ocb_setup { |
| struct cfg80211_chan_def chandef; |
| }; |
| |
| /** |
| * struct ieee80211_txq_params - TX queue parameters |
| * @ac: AC identifier |
| * @txop: Maximum burst time in units of 32 usecs, 0 meaning disabled |
| * @cwmin: Minimum contention window [a value of the form 2^n-1 in the range |
| * 1..32767] |
| * @cwmax: Maximum contention window [a value of the form 2^n-1 in the range |
| * 1..32767] |
| * @aifs: Arbitration interframe space [0..255] |
| */ |
| struct ieee80211_txq_params { |
| enum nl80211_ac ac; |
| u16 txop; |
| u16 cwmin; |
| u16 cwmax; |
| u8 aifs; |
| }; |
| |
| /** |
| * DOC: Scanning and BSS list handling |
| * |
| * The scanning process itself is fairly simple, but cfg80211 offers quite |
| * a bit of helper functionality. To start a scan, the scan operation will |
| * be invoked with a scan definition. This scan definition contains the |
| * channels to scan, and the SSIDs to send probe requests for (including the |
| * wildcard, if desired). A passive scan is indicated by having no SSIDs to |
| * probe. Additionally, a scan request may contain extra information elements |
| * that should be added to the probe request. The IEs are guaranteed to be |
| * well-formed, and will not exceed the maximum length the driver advertised |
| * in the wiphy structure. |
| * |
| * When scanning finds a BSS, cfg80211 needs to be notified of that, because |
| * it is responsible for maintaining the BSS list; the driver should not |
| * maintain a list itself. For this notification, various functions exist. |
| * |
| * Since drivers do not maintain a BSS list, there are also a number of |
| * functions to search for a BSS and obtain information about it from the |
| * BSS structure cfg80211 maintains. The BSS list is also made available |
| * to userspace. |
| */ |
| |
| /** |
| * struct cfg80211_ssid - SSID description |
| * @ssid: the SSID |
| * @ssid_len: length of the ssid |
| */ |
| struct cfg80211_ssid { |
| u8 ssid[IEEE80211_MAX_SSID_LEN]; |
| u8 ssid_len; |
| }; |
| |
| /** |
| * struct cfg80211_scan_info - information about completed scan |
| * @scan_start_tsf: scan start time in terms of the TSF of the BSS that the |
| * wireless device that requested the scan is connected to. If this |
| * information is not available, this field is left zero. |
| * @tsf_bssid: the BSSID according to which %scan_start_tsf is set. |
| * @aborted: set to true if the scan was aborted for any reason, |
| * userspace will be notified of that |
| */ |
| struct cfg80211_scan_info { |
| u64 scan_start_tsf; |
| u8 tsf_bssid[ETH_ALEN] __aligned(2); |
| bool aborted; |
| }; |
| |
| /** |
| * struct cfg80211_scan_request - scan request description |
| * |
| * @ssids: SSIDs to scan for (active scan only) |
| * @n_ssids: number of SSIDs |
| * @channels: channels to scan on. |
| * @n_channels: total number of channels to scan |
| * @scan_width: channel width for scanning |
| * @ie: optional information element(s) to add into Probe Request or %NULL |
| * @ie_len: length of ie in octets |
| * @duration: how long to listen on each channel, in TUs. If |
| * %duration_mandatory is not set, this is the maximum dwell time and |
| * the actual dwell time may be shorter. |
| * @duration_mandatory: if set, the scan duration must be as specified by the |
| * %duration field. |
| * @flags: bit field of flags controlling operation |
| * @rates: bitmap of rates to advertise for each band |
| * @wiphy: the wiphy this was for |
| * @scan_start: time (in jiffies) when the scan started |
| * @wdev: the wireless device to scan for |
| * @info: (internal) information about completed scan |
| * @notified: (internal) scan request was notified as done or aborted |
| * @no_cck: used to send probe requests at non CCK rate in 2GHz band |
| * @mac_addr: MAC address used with randomisation |
| * @mac_addr_mask: MAC address mask used with randomisation, bits that |
| * are 0 in the mask should be randomised, bits that are 1 should |
| * be taken from the @mac_addr |
| * @bssid: BSSID to scan for (most commonly, the wildcard BSSID) |
| */ |
| struct cfg80211_scan_request { |
| struct cfg80211_ssid *ssids; |
| int n_ssids; |
| u32 n_channels; |
| enum nl80211_bss_scan_width scan_width; |
| const u8 *ie; |
| size_t ie_len; |
| u16 duration; |
| bool duration_mandatory; |
| u32 flags; |
| |
| u32 rates[NUM_NL80211_BANDS]; |
| |
| struct wireless_dev *wdev; |
| |
| u8 mac_addr[ETH_ALEN] __aligned(2); |
| u8 mac_addr_mask[ETH_ALEN] __aligned(2); |
| u8 bssid[ETH_ALEN] __aligned(2); |
| |
| /* internal */ |
| struct wiphy *wiphy; |
| unsigned long scan_start; |
| struct cfg80211_scan_info info; |
| bool notified; |
| bool no_cck; |
| |
| /* keep last */ |
| struct ieee80211_channel *channels[0]; |
| }; |
| |
| static inline void get_random_mask_addr(u8 *buf, const u8 *addr, const u8 *mask) |
| { |
| int i; |
| |
| get_random_bytes(buf, ETH_ALEN); |
| for (i = 0; i < ETH_ALEN; i++) { |
| buf[i] &= ~mask[i]; |
| buf[i] |= addr[i] & mask[i]; |
| } |
| } |
| |
| /** |
| * struct cfg80211_match_set - sets of attributes to match |
| * |
| * @ssid: SSID to be matched; may be zero-length in case of BSSID match |
| * or no match (RSSI only) |
| * @bssid: BSSID to be matched; may be all-zero BSSID in case of SSID match |
| * or no match (RSSI only) |
| * @rssi_thold: don't report scan results below this threshold (in s32 dBm) |
| */ |
| struct cfg80211_match_set { |
| struct cfg80211_ssid ssid; |
| u8 bssid[ETH_ALEN]; |
| s32 rssi_thold; |
| }; |
| |
| /** |
| * struct cfg80211_sched_scan_plan - scan plan for scheduled scan |
| * |
| * @interval: interval between scheduled scan iterations. In seconds. |
| * @iterations: number of scan iterations in this scan plan. Zero means |
| * infinite loop. |
| * The last scan plan will always have this parameter set to zero, |
| * all other scan plans will have a finite number of iterations. |
| */ |
| struct cfg80211_sched_scan_plan { |
| u32 interval; |
| u32 iterations; |
| }; |
| |
| /** |
| * struct cfg80211_bss_select_adjust - BSS selection with RSSI adjustment. |
| * |
| * @band: band of BSS which should match for RSSI level adjustment. |
| * @delta: value of RSSI level adjustment. |
| */ |
| struct cfg80211_bss_select_adjust { |
| enum nl80211_band band; |
| s8 delta; |
| }; |
| |
| /** |
| * struct cfg80211_sched_scan_request - scheduled scan request description |
| * |
| * @reqid: identifies this request. |
| * @ssids: SSIDs to scan for (passed in the probe_reqs in active scans) |
| * @n_ssids: number of SSIDs |
| * @n_channels: total number of channels to scan |
| * @scan_width: channel width for scanning |
| * @ie: optional information element(s) to add into Probe Request or %NULL |
| * @ie_len: length of ie in octets |
| * @flags: bit field of flags controlling operation |
| * @match_sets: sets of parameters to be matched for a scan result |
| * entry to be considered valid and to be passed to the host |
| * (others are filtered out). |
| * If ommited, all results are passed. |
| * @n_match_sets: number of match sets |
| * @report_results: indicates that results were reported for this request |
| * @wiphy: the wiphy this was for |
| * @dev: the interface |
| * @scan_start: start time of the scheduled scan |
| * @channels: channels to scan |
| * @min_rssi_thold: for drivers only supporting a single threshold, this |
| * contains the minimum over all matchsets |
| * @mac_addr: MAC address used with randomisation |
| * @mac_addr_mask: MAC address mask used with randomisation, bits that |
| * are 0 in the mask should be randomised, bits that are 1 should |
| * be taken from the @mac_addr |
| * @scan_plans: scan plans to be executed in this scheduled scan. Lowest |
| * index must be executed first. |
| * @n_scan_plans: number of scan plans, at least 1. |
| * @rcu_head: RCU callback used to free the struct |
| * @owner_nlportid: netlink portid of owner (if this should is a request |
| * owned by a particular socket) |
| * @nl_owner_dead: netlink owner socket was closed - this request be freed |
| * @list: for keeping list of requests. |
| * @delay: delay in seconds to use before starting the first scan |
| * cycle. The driver may ignore this parameter and start |
| * immediately (or at any other time), if this feature is not |
| * supported. |
| * @relative_rssi_set: Indicates whether @relative_rssi is set or not. |
| * @relative_rssi: Relative RSSI threshold in dB to restrict scan result |
| * reporting in connected state to cases where a matching BSS is determined |
| * to have better or slightly worse RSSI than the current connected BSS. |
| * The relative RSSI threshold values are ignored in disconnected state. |
| * @rssi_adjust: delta dB of RSSI preference to be given to the BSSs that belong |
| * to the specified band while deciding whether a better BSS is reported |
| * using @relative_rssi. If delta is a negative number, the BSSs that |
| * belong to the specified band will be penalized by delta dB in relative |
| * comparisions. |
| */ |
| struct cfg80211_sched_scan_request { |
| u64 reqid; |
| struct cfg80211_ssid *ssids; |
| int n_ssids; |
| u32 n_channels; |
| enum nl80211_bss_scan_width scan_width; |
| const u8 *ie; |
| size_t ie_len; |
| u32 flags; |
| struct cfg80211_match_set *match_sets; |
| int n_match_sets; |
| s32 min_rssi_thold; |
| u32 delay; |
| struct cfg80211_sched_scan_plan *scan_plans; |
| int n_scan_plans; |
| |
| u8 mac_addr[ETH_ALEN] __aligned(2); |
| u8 mac_addr_mask[ETH_ALEN] __aligned(2); |
| |
| bool relative_rssi_set; |
| s8 relative_rssi; |
| struct cfg80211_bss_select_adjust rssi_adjust; |
| |
| /* internal */ |
| struct wiphy *wiphy; |
| struct net_device *dev; |
| unsigned long scan_start; |
| bool report_results; |
| struct rcu_head rcu_head; |
| u32 owner_nlportid; |
| bool nl_owner_dead; |
| struct list_head list; |
| |
| /* keep last */ |
| struct ieee80211_channel *channels[0]; |
| }; |
| |
| /** |
| * enum cfg80211_signal_type - signal type |
| * |
| * @CFG80211_SIGNAL_TYPE_NONE: no signal strength information available |
| * @CFG80211_SIGNAL_TYPE_MBM: signal strength in mBm (100*dBm) |
| * @CFG80211_SIGNAL_TYPE_UNSPEC: signal strength, increasing from 0 through 100 |
| */ |
| enum cfg80211_signal_type { |
| CFG80211_SIGNAL_TYPE_NONE, |
| CFG80211_SIGNAL_TYPE_MBM, |
| CFG80211_SIGNAL_TYPE_UNSPEC, |
| }; |
| |
| /** |
| * struct cfg80211_inform_bss - BSS inform data |
| * @chan: channel the frame was received on |
| * @scan_width: scan width that was used |
| * @signal: signal strength value, according to the wiphy's |
| * signal type |
| * @boottime_ns: timestamp (CLOCK_BOOTTIME) when the information was |
| * received; should match the time when the frame was actually |
| * received by the device (not just by the host, in case it was |
| * buffered on the device) and be accurate to about 10ms. |
| * If the frame isn't buffered, just passing the return value of |
| * ktime_get_boot_ns() is likely appropriate. |
| * @parent_tsf: the time at the start of reception of the first octet of the |
| * timestamp field of the frame. The time is the TSF of the BSS specified |
| * by %parent_bssid. |
| * @parent_bssid: the BSS according to which %parent_tsf is set. This is set to |
| * the BSS that requested the scan in which the beacon/probe was received. |
| */ |
| struct cfg80211_inform_bss { |
| struct ieee80211_channel *chan; |
| enum nl80211_bss_scan_width scan_width; |
| s32 signal; |
| u64 boottime_ns; |
| u64 parent_tsf; |
| u8 parent_bssid[ETH_ALEN] __aligned(2); |
| }; |
| |
| /** |
| * struct cfg80211_bss_ies - BSS entry IE data |
| * @tsf: TSF contained in the frame that carried these IEs |
| * @rcu_head: internal use, for freeing |
| * @len: length of the IEs |
| * @from_beacon: these IEs are known to come from a beacon |
| * @data: IE data |
| */ |
| struct cfg80211_bss_ies { |
| u64 tsf; |
| struct rcu_head rcu_head; |
| int len; |
| bool from_beacon; |
| u8 data[]; |
| }; |
| |
| /** |
| * struct cfg80211_bss - BSS description |
| * |
| * This structure describes a BSS (which may also be a mesh network) |
| * for use in scan results and similar. |
| * |
| * @channel: channel this BSS is on |
| * @scan_width: width of the control channel |
| * @bssid: BSSID of the BSS |
| * @beacon_interval: the beacon interval as from the frame |
| * @capability: the capability field in host byte order |
| * @ies: the information elements (Note that there is no guarantee that these |
| * are well-formed!); this is a pointer to either the beacon_ies or |
| * proberesp_ies depending on whether Probe Response frame has been |
| * received. It is always non-%NULL. |
| * @beacon_ies: the information elements from the last Beacon frame |
| * (implementation note: if @hidden_beacon_bss is set this struct doesn't |
| * own the beacon_ies, but they're just pointers to the ones from the |
| * @hidden_beacon_bss struct) |
| * @proberesp_ies: the information elements from the last Probe Response frame |
| * @hidden_beacon_bss: in case this BSS struct represents a probe response from |
| * a BSS that hides the SSID in its beacon, this points to the BSS struct |
| * that holds the beacon data. @beacon_ies is still valid, of course, and |
| * points to the same data as hidden_beacon_bss->beacon_ies in that case. |
| * @signal: signal strength value (type depends on the wiphy's signal_type) |
| * @priv: private area for driver use, has at least wiphy->bss_priv_size bytes |
| */ |
| struct cfg80211_bss { |
| struct ieee80211_channel *channel; |
| enum nl80211_bss_scan_width scan_width; |
| |
| const struct cfg80211_bss_ies __rcu *ies; |
| const struct cfg80211_bss_ies __rcu *beacon_ies; |
| const struct cfg80211_bss_ies __rcu *proberesp_ies; |
| |
| struct cfg80211_bss *hidden_beacon_bss; |
| |
| s32 signal; |
| |
| u16 beacon_interval; |
| u16 capability; |
| |
| u8 bssid[ETH_ALEN]; |
| |
| u8 priv[0] __aligned(sizeof(void *)); |
| }; |
| |
| /** |
| * ieee80211_bss_get_ie - find IE with given ID |
| * @bss: the bss to search |
| * @ie: the IE ID |
| * |
| * Note that the return value is an RCU-protected pointer, so |
| * rcu_read_lock() must be held when calling this function. |
| * Return: %NULL if not found. |
| */ |
| const u8 *ieee80211_bss_get_ie(struct cfg80211_bss *bss, u8 ie); |
| |
| |
| /** |
| * struct cfg80211_auth_request - Authentication request data |
| * |
| * This structure provides information needed to complete IEEE 802.11 |
| * authentication. |
| * |
| * @bss: The BSS to authenticate with, the callee must obtain a reference |
| * to it if it needs to keep it. |
| * @auth_type: Authentication type (algorithm) |
| * @ie: Extra IEs to add to Authentication frame or %NULL |
| * @ie_len: Length of ie buffer in octets |
| * @key_len: length of WEP key for shared key authentication |
| * @key_idx: index of WEP key for shared key authentication |
| * @key: WEP key for shared key authentication |
| * @auth_data: Fields and elements in Authentication frames. This contains |
| * the authentication frame body (non-IE and IE data), excluding the |
| * Authentication algorithm number, i.e., starting at the Authentication |
| * transaction sequence number field. |
| * @auth_data_len: Length of auth_data buffer in octets |
| */ |
| struct cfg80211_auth_request { |
| struct cfg80211_bss *bss; |
| const u8 *ie; |
| size_t ie_len; |
| enum nl80211_auth_type auth_type; |
| const u8 *key; |
| u8 key_len, key_idx; |
| const u8 *auth_data; |
| size_t auth_data_len; |
| }; |
| |
| /** |
| * enum cfg80211_assoc_req_flags - Over-ride default behaviour in association. |
| * |
| * @ASSOC_REQ_DISABLE_HT: Disable HT (802.11n) |
| * @ASSOC_REQ_DISABLE_VHT: Disable VHT |
| * @ASSOC_REQ_USE_RRM: Declare RRM capability in this association |
| */ |
| enum cfg80211_assoc_req_flags { |
| ASSOC_REQ_DISABLE_HT = BIT(0), |
| ASSOC_REQ_DISABLE_VHT = BIT(1), |
| ASSOC_REQ_USE_RRM = BIT(2), |
| }; |
| |
| /** |
| * struct cfg80211_assoc_request - (Re)Association request data |
| * |
| * This structure provides information needed to complete IEEE 802.11 |
| * (re)association. |
| * @bss: The BSS to associate with. If the call is successful the driver is |
| * given a reference that it must give back to cfg80211_send_rx_assoc() |
| * or to cfg80211_assoc_timeout(). To ensure proper refcounting, new |
| * association requests while already associating must be rejected. |
| * @ie: Extra IEs to add to (Re)Association Request frame or %NULL |
| * @ie_len: Length of ie buffer in octets |
| * @use_mfp: Use management frame protection (IEEE 802.11w) in this association |
| * @crypto: crypto settings |
| * @prev_bssid: previous BSSID, if not %NULL use reassociate frame. This is used |
| * to indicate a request to reassociate within the ESS instead of a request |
| * do the initial association with the ESS. When included, this is set to |
| * the BSSID of the current association, i.e., to the value that is |
| * included in the Current AP address field of the Reassociation Request |
| * frame. |
| * @flags: See &enum cfg80211_assoc_req_flags |
| * @ht_capa: HT Capabilities over-rides. Values set in ht_capa_mask |
| * will be used in ht_capa. Un-supported values will be ignored. |
| * @ht_capa_mask: The bits of ht_capa which are to be used. |
| * @vht_capa: VHT capability override |
| * @vht_capa_mask: VHT capability mask indicating which fields to use |
| * @fils_kek: FILS KEK for protecting (Re)Association Request/Response frame or |
| * %NULL if FILS is not used. |
| * @fils_kek_len: Length of fils_kek in octets |
| * @fils_nonces: FILS nonces (part of AAD) for protecting (Re)Association |
| * Request/Response frame or %NULL if FILS is not used. This field starts |
| * with 16 octets of STA Nonce followed by 16 octets of AP Nonce. |
| */ |
| struct cfg80211_assoc_request { |
| struct cfg80211_bss *bss; |
| const u8 *ie, *prev_bssid; |
| size_t ie_len; |
| struct cfg80211_crypto_settings crypto; |
| bool use_mfp; |
| u32 flags; |
| struct ieee80211_ht_cap ht_capa; |
| struct ieee80211_ht_cap ht_capa_mask; |
| struct ieee80211_vht_cap vht_capa, vht_capa_mask; |
| const u8 *fils_kek; |
| size_t fils_kek_len; |
| const u8 *fils_nonces; |
| }; |
| |
| /** |
| * struct cfg80211_deauth_request - Deauthentication request data |
| * |
| * This structure provides information needed to complete IEEE 802.11 |
| * deauthentication. |
| * |
| * @bssid: the BSSID of the BSS to deauthenticate from |
| * @ie: Extra IEs to add to Deauthentication frame or %NULL |
| * @ie_len: Length of ie buffer in octets |
| * @reason_code: The reason code for the deauthentication |
| * @local_state_change: if set, change local state only and |
| * do not set a deauth frame |
| */ |
| struct cfg80211_deauth_request { |
| const u8 *bssid; |
| const u8 *ie; |
| size_t ie_len; |
| u16 reason_code; |
| bool local_state_change; |
| }; |
| |
| /** |
| * struct cfg80211_disassoc_request - Disassociation request data |
| * |
| * This structure provides information needed to complete IEEE 802.11 |
| * disassociation. |
| * |
| * @bss: the BSS to disassociate from |
| * @ie: Extra IEs to add to Disassociation frame or %NULL |
| * @ie_len: Length of ie buffer in octets |
| * @reason_code: The reason code for the disassociation |
| * @local_state_change: This is a request for a local state only, i.e., no |
| * Disassociation frame is to be transmitted. |
| */ |
| struct cfg80211_disassoc_request { |
| struct cfg80211_bss *bss; |
| const u8 *ie; |
| size_t ie_len; |
| u16 reason_code; |
| bool local_state_change; |
| }; |
| |
| /** |
| * struct cfg80211_ibss_params - IBSS parameters |
| * |
| * This structure defines the IBSS parameters for the join_ibss() |
| * method. |
| * |
| * @ssid: The SSID, will always be non-null. |
| * @ssid_len: The length of the SSID, will always be non-zero. |
| * @bssid: Fixed BSSID requested, maybe be %NULL, if set do not |
| * search for IBSSs with a different BSSID. |
| * @chandef: defines the channel to use if no other IBSS to join can be found |
| * @channel_fixed: The channel should be fixed -- do not search for |
| * IBSSs to join on other channels. |
| * @ie: information element(s) to include in the beacon |
| * @ie_len: length of that |
| * @beacon_interval: beacon interval to use |
| * @privacy: this is a protected network, keys will be configured |
| * after joining |
| * @control_port: whether user space controls IEEE 802.1X port, i.e., |
| * sets/clears %NL80211_STA_FLAG_AUTHORIZED. If true, the driver is |
| * required to assume that the port is unauthorized until authorized by |
| * user space. Otherwise, port is marked authorized by default. |
| * @userspace_handles_dfs: whether user space controls DFS operation, i.e. |
| * changes the channel when a radar is detected. This is required |
| * to operate on DFS channels. |
| * @basic_rates: bitmap of basic rates to use when creating the IBSS |
| * @mcast_rate: per-band multicast rate index + 1 (0: disabled) |
| * @ht_capa: HT Capabilities over-rides. Values set in ht_capa_mask |
| * will be used in ht_capa. Un-supported values will be ignored. |
| * @ht_capa_mask: The bits of ht_capa which are to be used. |
| */ |
| struct cfg80211_ibss_params { |
| const u8 *ssid; |
| const u8 *bssid; |
| struct cfg80211_chan_def chandef; |
| const u8 *ie; |
| u8 ssid_len, ie_len; |
| u16 beacon_interval; |
| u32 basic_rates; |
| bool channel_fixed; |
| bool privacy; |
| bool control_port; |
| bool userspace_handles_dfs; |
| int mcast_rate[NUM_NL80211_BANDS]; |
| struct ieee80211_ht_cap ht_capa; |
| struct ieee80211_ht_cap ht_capa_mask; |
| }; |
| |
| /** |
| * struct cfg80211_bss_selection - connection parameters for BSS selection. |
| * |
| * @behaviour: requested BSS selection behaviour. |
| * @param: parameters for requestion behaviour. |
| * @band_pref: preferred band for %NL80211_BSS_SELECT_ATTR_BAND_PREF. |
| * @adjust: parameters for %NL80211_BSS_SELECT_ATTR_RSSI_ADJUST. |
| */ |
| struct cfg80211_bss_selection { |
| enum nl80211_bss_select_attr behaviour; |
| union { |
| enum nl80211_band band_pref; |
| struct cfg80211_bss_select_adjust adjust; |
| } param; |
| }; |
| |
| /** |
| * struct cfg80211_connect_params - Connection parameters |
| * |
| * This structure provides information needed to complete IEEE 802.11 |
| * authentication and association. |
| * |
| * @channel: The channel to use or %NULL if not specified (auto-select based |
| * on scan results) |
| * @channel_hint: The channel of the recommended BSS for initial connection or |
| * %NULL if not specified |
| * @bssid: The AP BSSID or %NULL if not specified (auto-select based on scan |
| * results) |
| * @bssid_hint: The recommended AP BSSID for initial connection to the BSS or |
| * %NULL if not specified. Unlike the @bssid parameter, the driver is |
| * allowed to ignore this @bssid_hint if it has knowledge of a better BSS |
| * to use. |
| * @ssid: SSID |
| * @ssid_len: Length of ssid in octets |
| * @auth_type: Authentication type (algorithm) |
| * @ie: IEs for association request |
| * @ie_len: Length of assoc_ie in octets |
| * @privacy: indicates whether privacy-enabled APs should be used |
| * @mfp: indicate whether management frame protection is used |
| * @crypto: crypto settings |
| * @key_len: length of WEP key for shared key authentication |
| * @key_idx: index of WEP key for shared key authentication |
| * @key: WEP key for shared key authentication |
| * @flags: See &enum cfg80211_assoc_req_flags |
| * @bg_scan_period: Background scan period in seconds |
| * or -1 to indicate that default value is to be used. |
| * @ht_capa: HT Capabilities over-rides. Values set in ht_capa_mask |
| * will be used in ht_capa. Un-supported values will be ignored. |
| * @ht_capa_mask: The bits of ht_capa which are to be used. |
| * @vht_capa: VHT Capability overrides |
| * @vht_capa_mask: The bits of vht_capa which are to be used. |
| * @pbss: if set, connect to a PCP instead of AP. Valid for DMG |
| * networks. |
| * @bss_select: criteria to be used for BSS selection. |
| * @prev_bssid: previous BSSID, if not %NULL use reassociate frame. This is used |
| * to indicate a request to reassociate within the ESS instead of a request |
| * do the initial association with the ESS. When included, this is set to |
| * the BSSID of the current association, i.e., to the value that is |
| * included in the Current AP address field of the Reassociation Request |
| * frame. |
| * @fils_erp_username: EAP re-authentication protocol (ERP) username part of the |
| * NAI or %NULL if not specified. This is used to construct FILS wrapped |
| * data IE. |
| * @fils_erp_username_len: Length of @fils_erp_username in octets. |
| * @fils_erp_realm: EAP re-authentication protocol (ERP) realm part of NAI or |
| * %NULL if not specified. This specifies the domain name of ER server and |
| * is used to construct FILS wrapped data IE. |
| * @fils_erp_realm_len: Length of @fils_erp_realm in octets. |
| * @fils_erp_next_seq_num: The next sequence number to use in the FILS ERP |
| * messages. This is also used to construct FILS wrapped data IE. |
| * @fils_erp_rrk: ERP re-authentication Root Key (rRK) used to derive additional |
| * keys in FILS or %NULL if not specified. |
| * @fils_erp_rrk_len: Length of @fils_erp_rrk in octets. |
| * @want_1x: indicates user-space supports and wants to use 802.1X driver |
| * offload of 4-way handshake. |
| */ |
| struct cfg80211_connect_params { |
| struct ieee80211_channel *channel; |
| struct ieee80211_channel *channel_hint; |
| const u8 *bssid; |
| const u8 *bssid_hint; |
| const u8 *ssid; |
| size_t ssid_len; |
| enum nl80211_auth_type auth_type; |
| const u8 *ie; |
| size_t ie_len; |
| bool privacy; |
| enum nl80211_mfp mfp; |
| struct cfg80211_crypto_settings crypto; |
| const u8 *key; |
| u8 key_len, key_idx; |
| u32 flags; |
| int bg_scan_period; |
| struct ieee80211_ht_cap ht_capa; |
| struct ieee80211_ht_cap ht_capa_mask; |
| struct ieee80211_vht_cap vht_capa; |
| struct ieee80211_vht_cap vht_capa_mask; |
| bool pbss; |
| struct cfg80211_bss_selection bss_select; |
| const u8 *prev_bssid; |
| const u8 *fils_erp_username; |
| size_t fils_erp_username_len; |
| const u8 *fils_erp_realm; |
| size_t fils_erp_realm_len; |
| u16 fils_erp_next_seq_num; |
| const u8 *fils_erp_rrk; |
| size_t fils_erp_rrk_len; |
| bool want_1x; |
| }; |
| |
| /** |
| * enum cfg80211_connect_params_changed - Connection parameters being updated |
| * |
| * This enum provides information of all connect parameters that |
| * have to be updated as part of update_connect_params() call. |
| * |
| * @UPDATE_ASSOC_IES: Indicates whether association request IEs are updated |
| */ |
| enum cfg80211_connect_params_changed { |
| UPDATE_ASSOC_IES = BIT(0), |
| }; |
| |
| /** |
| * enum wiphy_params_flags - set_wiphy_params bitfield values |
| * @WIPHY_PARAM_RETRY_SHORT: wiphy->retry_short has changed |
| * @WIPHY_PARAM_RETRY_LONG: wiphy->retry_long has changed |
| * @WIPHY_PARAM_FRAG_THRESHOLD: wiphy->frag_threshold has changed |
| * @WIPHY_PARAM_RTS_THRESHOLD: wiphy->rts_threshold has changed |
| * @WIPHY_PARAM_COVERAGE_CLASS: coverage class changed |
| * @WIPHY_PARAM_DYN_ACK: dynack has been enabled |
| */ |
| enum wiphy_params_flags { |
| WIPHY_PARAM_RETRY_SHORT = 1 << 0, |
| WIPHY_PARAM_RETRY_LONG = 1 << 1, |
| WIPHY_PARAM_FRAG_THRESHOLD = 1 << 2, |
| WIPHY_PARAM_RTS_THRESHOLD = 1 << 3, |
| WIPHY_PARAM_COVERAGE_CLASS = 1 << 4, |
| WIPHY_PARAM_DYN_ACK = 1 << 5, |
| }; |
| |
| /** |
| * struct cfg80211_pmksa - PMK Security Association |
| * |
| * This structure is passed to the set/del_pmksa() method for PMKSA |
| * caching. |
| * |
| * @bssid: The AP's BSSID (may be %NULL). |
| * @pmkid: The identifier to refer a PMKSA. |
| * @pmk: The PMK for the PMKSA identified by @pmkid. This is used for key |
| * derivation by a FILS STA. Otherwise, %NULL. |
| * @pmk_len: Length of the @pmk. The length of @pmk can differ depending on |
| * the hash algorithm used to generate this. |
| * @ssid: SSID to specify the ESS within which a PMKSA is valid when using FILS |
| * cache identifier (may be %NULL). |
| * @ssid_len: Length of the @ssid in octets. |
| * @cache_id: 2-octet cache identifier advertized by a FILS AP identifying the |
| * scope of PMKSA. This is valid only if @ssid_len is non-zero (may be |
| * %NULL). |
| */ |
| struct cfg80211_pmksa { |
| const u8 *bssid; |
| const u8 *pmkid; |
| const u8 *pmk; |
| size_t pmk_len; |
| const u8 *ssid; |
| size_t ssid_len; |
| const u8 *cache_id; |
| }; |
| |
| /** |
| * struct cfg80211_pkt_pattern - packet pattern |
| * @mask: bitmask where to match pattern and where to ignore bytes, |
| * one bit per byte, in same format as nl80211 |
| * @pattern: bytes to match where bitmask is 1 |
| * @pattern_len: length of pattern (in bytes) |
| * @pkt_offset: packet offset (in bytes) |
| * |
| * Internal note: @mask and @pattern are allocated in one chunk of |
| * memory, free @mask only! |
| */ |
| struct cfg80211_pkt_pattern { |
| const u8 *mask, *pattern; |
| int pattern_len; |
| int pkt_offset; |
| }; |
| |
| /** |
| * struct cfg80211_wowlan_tcp - TCP connection parameters |
| * |
| * @sock: (internal) socket for source port allocation |
| * @src: source IP address |
| * @dst: destination IP address |
| * @dst_mac: destination MAC address |
| * @src_port: source port |
| * @dst_port: destination port |
| * @payload_len: data payload length |
| * @payload: data payload buffer |
| * @payload_seq: payload sequence stamping configuration |
| * @data_interval: interval at which to send data packets |
| * @wake_len: wakeup payload match length |
| * @wake_data: wakeup payload match data |
| * @wake_mask: wakeup payload match mask |
| * @tokens_size: length of the tokens buffer |
| * @payload_tok: payload token usage configuration |
| */ |
| struct cfg80211_wowlan_tcp { |
| struct socket *sock; |
| __be32 src, dst; |
| u16 src_port, dst_port; |
| u8 dst_mac[ETH_ALEN]; |
| int payload_len; |
| const u8 *payload; |
| struct nl80211_wowlan_tcp_data_seq payload_seq; |
| u32 data_interval; |
| u32 wake_len; |
| const u8 *wake_data, *wake_mask; |
| u32 tokens_size; |
| /* must be last, variable member */ |
| struct nl80211_wowlan_tcp_data_token payload_tok; |
| }; |
| |
| /** |
| * struct cfg80211_wowlan - Wake on Wireless-LAN support info |
| * |
| * This structure defines the enabled WoWLAN triggers for the device. |
| * @any: wake up on any activity -- special trigger if device continues |
| * operating as normal during suspend |
| * @disconnect: wake up if getting disconnected |
| * @magic_pkt: wake up on receiving magic packet |
| * @patterns: wake up on receiving packet matching a pattern |
| * @n_patterns: number of patterns |
| * @gtk_rekey_failure: wake up on GTK rekey failure |
| * @eap_identity_req: wake up on EAP identity request packet |
| * @four_way_handshake: wake up on 4-way handshake |
| * @rfkill_release: wake up when rfkill is released |
| * @tcp: TCP connection establishment/wakeup parameters, see nl80211.h. |
| * NULL if not configured. |
| * @nd_config: configuration for the scan to be used for net detect wake. |
| */ |
| struct cfg80211_wowlan { |
| bool any, disconnect, magic_pkt, gtk_rekey_failure, |
| eap_identity_req, four_way_handshake, |
| rfkill_release; |
| struct cfg80211_pkt_pattern *patterns; |
| struct cfg80211_wowlan_tcp *tcp; |
| int n_patterns; |
| struct cfg80211_sched_scan_request *nd_config; |
| }; |
| |
| /** |
| * struct cfg80211_coalesce_rules - Coalesce rule parameters |
| * |
| * This structure defines coalesce rule for the device. |
| * @delay: maximum coalescing delay in msecs. |
| * @condition: condition for packet coalescence. |
| * see &enum nl80211_coalesce_condition. |
| * @patterns: array of packet patterns |
| * @n_patterns: number of patterns |
| */ |
| struct cfg80211_coalesce_rules { |
| int delay; |
| enum nl80211_coalesce_condition condition; |
| struct cfg80211_pkt_pattern *patterns; |
| int n_patterns; |
| }; |
| |
| /** |
| * struct cfg80211_coalesce - Packet coalescing settings |
| * |
| * This structure defines coalescing settings. |
| * @rules: array of coalesce rules |
| * @n_rules: number of rules |
| */ |
| struct cfg80211_coalesce { |
| struct cfg80211_coalesce_rules *rules; |
| int n_rules; |
| }; |
| |
| /** |
| * struct cfg80211_wowlan_nd_match - information about the match |
| * |
| * @ssid: SSID of the match that triggered the wake up |
| * @n_channels: Number of channels where the match occurred. This |
| * value may be zero if the driver can't report the channels. |
| * @channels: center frequencies of the channels where a match |
| * occurred (in MHz) |
| */ |
| struct cfg80211_wowlan_nd_match { |
| struct cfg80211_ssid ssid; |
| int n_channels; |
| u32 channels[]; |
| }; |
| |
| /** |
| * struct cfg80211_wowlan_nd_info - net detect wake up information |
| * |
| * @n_matches: Number of match information instances provided in |
| * @matches. This value may be zero if the driver can't provide |
| * match information. |
| * @matches: Array of pointers to matches containing information about |
| * the matches that triggered the wake up. |
| */ |
| struct cfg80211_wowlan_nd_info { |
| int n_matches; |
| struct cfg80211_wowlan_nd_match *matches[]; |
| }; |
| |
| /** |
| * struct cfg80211_wowlan_wakeup - wakeup report |
| * @disconnect: woke up by getting disconnected |
| * @magic_pkt: woke up by receiving magic packet |
| * @gtk_rekey_failure: woke up by GTK rekey failure |
| * @eap_identity_req: woke up by EAP identity request packet |
| * @four_way_handshake: woke up by 4-way handshake |
| * @rfkill_release: woke up by rfkill being released |
| * @pattern_idx: pattern that caused wakeup, -1 if not due to pattern |
| * @packet_present_len: copied wakeup packet data |
| * @packet_len: original wakeup packet length |
| * @packet: The packet causing the wakeup, if any. |
| * @packet_80211: For pattern match, magic packet and other data |
| * frame triggers an 802.3 frame should be reported, for |
| * disconnect due to deauth 802.11 frame. This indicates which |
| * it is. |
| * @tcp_match: TCP wakeup packet received |
| * @tcp_connlost: TCP connection lost or failed to establish |
| * @tcp_nomoretokens: TCP data ran out of tokens |
| * @net_detect: if not %NULL, woke up because of net detect |
| */ |
| struct cfg80211_wowlan_wakeup { |
| bool disconnect, magic_pkt, gtk_rekey_failure, |
| eap_identity_req, four_way_handshake, |
| rfkill_release, packet_80211, |
| tcp_match, tcp_connlost, tcp_nomoretokens; |
| s32 pattern_idx; |
| u32 packet_present_len, packet_len; |
| const void *packet; |
| struct cfg80211_wowlan_nd_info *net_detect; |
| }; |
| |
| /** |
| * struct cfg80211_gtk_rekey_data - rekey data |
| * @kek: key encryption key (NL80211_KEK_LEN bytes) |
| * @kck: key confirmation key (NL80211_KCK_LEN bytes) |
| * @replay_ctr: replay counter (NL80211_REPLAY_CTR_LEN bytes) |
| */ |
| struct cfg80211_gtk_rekey_data { |
| const u8 *kek, *kck, *replay_ctr; |
| }; |
| |
| /** |
| * struct cfg80211_update_ft_ies_params - FT IE Information |
| * |
| * This structure provides information needed to update the fast transition IE |
| * |
| * @md: The Mobility Domain ID, 2 Octet value |
| * @ie: Fast Transition IEs |
| * @ie_len: Length of ft_ie in octets |
| */ |
| struct cfg80211_update_ft_ies_params { |
| u16 md; |
| const u8 *ie; |
| size_t ie_len; |
| }; |
| |
| /** |
| * struct cfg80211_mgmt_tx_params - mgmt tx parameters |
| * |
| * This structure provides information needed to transmit a mgmt frame |
| * |
| * @chan: channel to use |
| * @offchan: indicates wether off channel operation is required |
| * @wait: duration for ROC |
| * @buf: buffer to transmit |
| * @len: buffer length |
| * @no_cck: don't use cck rates for this frame |
| * @dont_wait_for_ack: tells the low level not to wait for an ack |
| * @n_csa_offsets: length of csa_offsets array |
| * @csa_offsets: array of all the csa offsets in the frame |
| */ |
| struct cfg80211_mgmt_tx_params { |
| struct ieee80211_channel *chan; |
| bool offchan; |
| unsigned int wait; |
| const u8 *buf; |
| size_t len; |
| bool no_cck; |
| bool dont_wait_for_ack; |
| int n_csa_offsets; |
| const u16 *csa_offsets; |
| }; |
| |
| /** |
| * struct cfg80211_dscp_exception - DSCP exception |
| * |
| * @dscp: DSCP value that does not adhere to the user priority range definition |
| * @up: user priority value to which the corresponding DSCP value belongs |
| */ |
| struct cfg80211_dscp_exception { |
| u8 dscp; |
| u8 up; |
| }; |
| |
| /** |
| * struct cfg80211_dscp_range - DSCP range definition for user priority |
| * |
| * @low: lowest DSCP value of this user priority range, inclusive |
| * @high: highest DSCP value of this user priority range, inclusive |
| */ |
| struct cfg80211_dscp_range { |
| u8 low; |
| u8 high; |
| }; |
| |
| /* QoS Map Set element length defined in IEEE Std 802.11-2012, 8.4.2.97 */ |
| #define IEEE80211_QOS_MAP_MAX_EX 21 |
| #define IEEE80211_QOS_MAP_LEN_MIN 16 |
| #define IEEE80211_QOS_MAP_LEN_MAX \ |
| (IEEE80211_QOS_MAP_LEN_MIN + 2 * IEEE80211_QOS_MAP_MAX_EX) |
| |
| /** |
| * struct cfg80211_qos_map - QoS Map Information |
| * |
| * This struct defines the Interworking QoS map setting for DSCP values |
| * |
| * @num_des: number of DSCP exceptions (0..21) |
| * @dscp_exception: optionally up to maximum of 21 DSCP exceptions from |
| * the user priority DSCP range definition |
| * @up: DSCP range definition for a particular user priority |
| */ |
| struct cfg80211_qos_map { |
| u8 num_des; |
| struct cfg80211_dscp_exception dscp_exception[IEEE80211_QOS_MAP_MAX_EX]; |
| struct cfg80211_dscp_range up[8]; |
| }; |
| |
| /** |
| * struct cfg80211_nan_conf - NAN configuration |
| * |
| * This struct defines NAN configuration parameters |
| * |
| * @master_pref: master preference (1 - 255) |
| * @bands: operating bands, a bitmap of &enum nl80211_band values. |
| * For instance, for NL80211_BAND_2GHZ, bit 0 would be set |
| * (i.e. BIT(NL80211_BAND_2GHZ)). |
| */ |
| struct cfg80211_nan_conf { |
| u8 master_pref; |
| u8 bands; |
| }; |
| |
| /** |
| * enum cfg80211_nan_conf_changes - indicates changed fields in NAN |
| * configuration |
| * |
| * @CFG80211_NAN_CONF_CHANGED_PREF: master preference |
| * @CFG80211_NAN_CONF_CHANGED_BANDS: operating bands |
| */ |
| enum cfg80211_nan_conf_changes { |
| CFG80211_NAN_CONF_CHANGED_PREF = BIT(0), |
| CFG80211_NAN_CONF_CHANGED_BANDS = BIT(1), |
| }; |
| |
| /** |
| * struct cfg80211_nan_func_filter - a NAN function Rx / Tx filter |
| * |
| * @filter: the content of the filter |
| * @len: the length of the filter |
| */ |
| struct cfg80211_nan_func_filter { |
| const u8 *filter; |
| u8 len; |
| }; |
| |
| /** |
| * struct cfg80211_nan_func - a NAN function |
| * |
| * @type: &enum nl80211_nan_function_type |
| * @service_id: the service ID of the function |
| * @publish_type: &nl80211_nan_publish_type |
| * @close_range: if true, the range should be limited. Threshold is |
| * implementation specific. |
| * @publish_bcast: if true, the solicited publish should be broadcasted |
| * @subscribe_active: if true, the subscribe is active |
| * @followup_id: the instance ID for follow up |
| * @followup_reqid: the requestor instance ID for follow up |
| * @followup_dest: MAC address of the recipient of the follow up |
| * @ttl: time to live counter in DW. |
| * @serv_spec_info: Service Specific Info |
| * @serv_spec_info_len: Service Specific Info length |
| * @srf_include: if true, SRF is inclusive |
| * @srf_bf: Bloom Filter |
| * @srf_bf_len: Bloom Filter length |
| * @srf_bf_idx: Bloom Filter index |
| * @srf_macs: SRF MAC addresses |
| * @srf_num_macs: number of MAC addresses in SRF |
| * @rx_filters: rx filters that are matched with corresponding peer's tx_filter |
| * @tx_filters: filters that should be transmitted in the SDF. |
| * @num_rx_filters: length of &rx_filters. |
| * @num_tx_filters: length of &tx_filters. |
| * @instance_id: driver allocated id of the function. |
| * @cookie: unique NAN function identifier. |
| */ |
| struct cfg80211_nan_func { |
| enum nl80211_nan_function_type type; |
| u8 service_id[NL80211_NAN_FUNC_SERVICE_ID_LEN]; |
| u8 publish_type; |
| bool close_range; |
| bool publish_bcast; |
| bool subscribe_active; |
| u8 followup_id; |
| u8 followup_reqid; |
| struct mac_address followup_dest; |
| u32 ttl; |
| const u8 *serv_spec_info; |
| u8 serv_spec_info_len; |
| bool srf_include; |
| const u8 *srf_bf; |
| u8 srf_bf_len; |
| u8 srf_bf_idx; |
| struct mac_address *srf_macs; |
| int srf_num_macs; |
| struct cfg80211_nan_func_filter *rx_filters; |
| struct cfg80211_nan_func_filter *tx_filters; |
| u8 num_tx_filters; |
| u8 num_rx_filters; |
| u8 instance_id; |
| u64 cookie; |
| }; |
| |
| /** |
| * struct cfg80211_pmk_conf - PMK configuration |
| * |
| * @aa: authenticator address |
| * @pmk_len: PMK length in bytes. |
| * @pmk: the PMK material |
| * @pmk_r0_name: PMK-R0 Name. NULL if not applicable (i.e., the PMK |
| * is not PMK-R0). When pmk_r0_name is not NULL, the pmk field |
| * holds PMK-R0. |
| */ |
| struct cfg80211_pmk_conf { |
| const u8 *aa; |
| u8 pmk_len; |
| const u8 *pmk; |
| const u8 *pmk_r0_name; |
| }; |
| |
| /** |
| * struct cfg80211_ops - backend description for wireless configuration |
| * |
| * This struct is registered by fullmac card drivers and/or wireless stacks |
| * in order to handle configuration requests on their interfaces. |
| * |
| * All callbacks except where otherwise noted should return 0 |
| * on success or a negative error code. |
| * |
| * All operations are currently invoked under rtnl for consistency with the |
| * wireless extensions but this is subject to reevaluation as soon as this |
| * code is used more widely and we have a first user without wext. |
| * |
| * @suspend: wiphy device needs to be suspended. The variable @wow will |
| * be %NULL or contain the enabled Wake-on-Wireless triggers that are |
| * configured for the device. |
| * @resume: wiphy device needs to be resumed |
| * @set_wakeup: Called when WoWLAN is enabled/disabled, use this callback |
| * to call device_set_wakeup_enable() to enable/disable wakeup from |
| * the device. |
| * |
| * @add_virtual_intf: create a new virtual interface with the given name, |
| * must set the struct wireless_dev's iftype. Beware: You must create |
| * the new netdev in the wiphy's network namespace! Returns the struct |
| * wireless_dev, or an ERR_PTR. For P2P device wdevs, the driver must |
| * also set the address member in the wdev. |
| * |
| * @del_virtual_intf: remove the virtual interface |
| * |
| * @change_virtual_intf: change type/configuration of virtual interface, |
| * keep the struct wireless_dev's iftype updated. |
| * |
| * @add_key: add a key with the given parameters. @mac_addr will be %NULL |
| * when adding a group key. |
| * |
| * @get_key: get information about the key with the given parameters. |
| * @mac_addr will be %NULL when requesting information for a group |
| * key. All pointers given to the @callback function need not be valid |
| * after it returns. This function should return an error if it is |
| * not possible to retrieve the key, -ENOENT if it doesn't exist. |
| * |
| * @del_key: remove a key given the @mac_addr (%NULL for a group key) |
| * and @key_index, return -ENOENT if the key doesn't exist. |
| * |
| * @set_default_key: set the default key on an interface |
| * |
| * @set_default_mgmt_key: set the default management frame key on an interface |
| * |
| * @set_rekey_data: give the data necessary for GTK rekeying to the driver |
| * |
| * @start_ap: Start acting in AP mode defined by the parameters. |
| * @change_beacon: Change the beacon parameters for an access point mode |
| * interface. This should reject the call when AP mode wasn't started. |
| * @stop_ap: Stop being an AP, including stopping beaconing. |
| * |
| * @add_station: Add a new station. |
| * @del_station: Remove a station |
| * @change_station: Modify a given station. Note that flags changes are not much |
| * validated in cfg80211, in particular the auth/assoc/authorized flags |
| * might come to the driver in invalid combinations -- make sure to check |
| * them, also against the existing state! Drivers must call |
| * cfg80211_check_station_change() to validate the information. |
| * @get_station: get station information for the station identified by @mac |
| * @dump_station: dump station callback -- resume dump at index @idx |
| * |
| * @add_mpath: add a fixed mesh path |
| * @del_mpath: delete a given mesh path |
| * @change_mpath: change a given mesh path |
| * @get_mpath: get a mesh path for the given parameters |
| * @dump_mpath: dump mesh path callback -- resume dump at index @idx |
| * @get_mpp: get a mesh proxy path for the given parameters |
| * @dump_mpp: dump mesh proxy path callback -- resume dump at index @idx |
| * @join_mesh: join the mesh network with the specified parameters |
| * (invoked with the wireless_dev mutex held) |
| * @leave_mesh: leave the current mesh network |
| * (invoked with the wireless_dev mutex held) |
| * |
| * @get_mesh_config: Get the current mesh configuration |
| * |
| * @update_mesh_config: Update mesh parameters on a running mesh. |
| * The mask is a bitfield which tells us which parameters to |
| * set, and which to leave alone. |
| * |
| * @change_bss: Modify parameters for a given BSS. |
| * |
| * @set_txq_params: Set TX queue parameters |
| * |
| * @libertas_set_mesh_channel: Only for backward compatibility for libertas, |
| * as it doesn't implement join_mesh and needs to set the channel to |
| * join the mesh instead. |
| * |
| * @set_monitor_channel: Set the monitor mode channel for the device. If other |
| * interfaces are active this callback should reject the configuration. |
| * If no interfaces are active or the device is down, the channel should |
| * be stored for when a monitor interface becomes active. |
| * |
| * @scan: Request to do a scan. If returning zero, the scan request is given |
| * the driver, and will be valid until passed to cfg80211_scan_done(). |
| * For scan results, call cfg80211_inform_bss(); you can call this outside |
| * the scan/scan_done bracket too. |
| * @abort_scan: Tell the driver to abort an ongoing scan. The driver shall |
| * indicate the status of the scan through cfg80211_scan_done(). |
| * |
| * @auth: Request to authenticate with the specified peer |
| * (invoked with the wireless_dev mutex held) |
| * @assoc: Request to (re)associate with the specified peer |
| * (invoked with the wireless_dev mutex held) |
| * @deauth: Request to deauthenticate from the specified peer |
| * (invoked with the wireless_dev mutex held) |
| * @disassoc: Request to disassociate from the specified peer |
| * (invoked with the wireless_dev mutex held) |
| * |
| * @connect: Connect to the ESS with the specified parameters. When connected, |
| * call cfg80211_connect_result()/cfg80211_connect_bss() with status code |
| * %WLAN_STATUS_SUCCESS. If the connection fails for some reason, call |
| * cfg80211_connect_result()/cfg80211_connect_bss() with the status code |
| * from the AP or cfg80211_connect_timeout() if no frame with status code |
| * was received. |
| * The driver is allowed to roam to other BSSes within the ESS when the |
| * other BSS matches the connect parameters. When such roaming is initiated |
| * by the driver, the driver is expected to verify that the target matches |
| * the configured security parameters and to use Reassociation Request |
| * frame instead of Association Request frame. |
| * The connect function can also be used to request the driver to perform a |
| * specific roam when connected to an ESS. In that case, the prev_bssid |
| * parameter is set to the BSSID of the currently associated BSS as an |
| * indication of requesting reassociation. |
| * In both the driver-initiated and new connect() call initiated roaming |
| * cases, the result of roaming is indicated with a call to |
| * cfg80211_roamed(). (invoked with the wireless_dev mutex held) |
| * @update_connect_params: Update the connect parameters while connected to a |
| * BSS. The updated parameters can be used by driver/firmware for |
| * subsequent BSS selection (roaming) decisions and to form the |
| * Authentication/(Re)Association Request frames. This call does not |
| * request an immediate disassociation or reassociation with the current |
| * BSS, i.e., this impacts only subsequent (re)associations. The bits in |
| * changed are defined in &enum cfg80211_connect_params_changed. |
| * (invoked with the wireless_dev mutex held) |
| * @disconnect: Disconnect from the BSS/ESS or stop connection attempts if |
| * connection is in progress. Once done, call cfg80211_disconnected() in |
| * case connection was already established (invoked with the |
| * wireless_dev mutex held), otherwise call cfg80211_connect_timeout(). |
| * |
| * @join_ibss: Join the specified IBSS (or create if necessary). Once done, call |
| * cfg80211_ibss_joined(), also call that function when changing BSSID due |
| * to a merge. |
| * (invoked with the wireless_dev mutex held) |
| * @leave_ibss: Leave the IBSS. |
| * (invoked with the wireless_dev mutex held) |
| * |
| * @set_mcast_rate: Set the specified multicast rate (only if vif is in ADHOC or |
| * MESH mode) |
| * |
| * @set_wiphy_params: Notify that wiphy parameters have changed; |
| * @changed bitfield (see &enum wiphy_params_flags) describes which values |
| * have changed. The actual parameter values are available in |
| * struct wiphy. If returning an error, no value should be changed. |
| * |
| * @set_tx_power: set the transmit power according to the parameters, |
| * the power passed is in mBm, to get dBm use MBM_TO_DBM(). The |
| * wdev may be %NULL if power was set for the wiphy, and will |
| * always be %NULL unless the driver supports per-vif TX power |
| * (as advertised by the nl80211 feature flag.) |
| * @get_tx_power: store the current TX power into the dbm variable; |
| * return 0 if successful |
| * |
| * @set_wds_peer: set the WDS peer for a WDS interface |
| * |
| * @rfkill_poll: polls the hw rfkill line, use cfg80211 reporting |
| * functions to adjust rfkill hw state |
| * |
| * @dump_survey: get site survey information. |
| * |
| * @remain_on_channel: Request the driver to remain awake on the specified |
| * channel for the specified duration to complete an off-channel |
| * operation (e.g., public action frame exchange). When the driver is |
| * ready on the requested channel, it must indicate this with an event |
| * notification by calling cfg80211_ready_on_channel(). |
| * @cancel_remain_on_channel: Cancel an on-going remain-on-channel operation. |
| * This allows the operation to be terminated prior to timeout based on |
| * the duration value. |
| * @mgmt_tx: Transmit a management frame. |
| * @mgmt_tx_cancel_wait: Cancel the wait time from transmitting a management |
| * frame on another channel |
| * |
| * @testmode_cmd: run a test mode command; @wdev may be %NULL |
| * @testmode_dump: Implement a test mode dump. The cb->args[2] and up may be |
| * used by the function, but 0 and 1 must not be touched. Additionally, |
| * return error codes other than -ENOBUFS and -ENOENT will terminate the |
| * dump and return to userspace with an error, so be careful. If any data |
| * was passed in from userspace then the data/len arguments will be present |
| * and point to the data contained in %NL80211_ATTR_TESTDATA. |
| * |
| * @set_bitrate_mask: set the bitrate mask configuration |
| * |
| * @set_pmksa: Cache a PMKID for a BSSID. This is mostly useful for fullmac |
| * devices running firmwares capable of generating the (re) association |
| * RSN IE. It allows for faster roaming between WPA2 BSSIDs. |
| * @del_pmksa: Delete a cached PMKID. |
| * @flush_pmksa: Flush all cached PMKIDs. |
| * @set_power_mgmt: Configure WLAN power management. A timeout value of -1 |
| * allows the driver to adjust the dynamic ps timeout value. |
| * @set_cqm_rssi_config: Configure connection quality monitor RSSI threshold. |
| * After configuration, the driver should (soon) send an event indicating |
| * the current level is above/below the configured threshold; this may |
| * need some care when the configuration is changed (without first being |
| * disabled.) |
| * @set_cqm_rssi_range_config: Configure two RSSI thresholds in the |
| * connection quality monitor. An event is to be sent only when the |
| * signal level is found to be outside the two values. The driver should |
| * set %NL80211_EXT_FEATURE_CQM_RSSI_LIST if this method is implemented. |
| * If it is provided then there's no point providing @set_cqm_rssi_config. |
| * @set_cqm_txe_config: Configure connection quality monitor TX error |
| * thresholds. |
| * @sched_scan_start: Tell the driver to start a scheduled scan. |
| * @sched_scan_stop: Tell the driver to stop an ongoing scheduled scan with |
| * given request id. This call must stop the scheduled scan and be ready |
| * for starting a new one before it returns, i.e. @sched_scan_start may be |
| * called immediately after that again and should not fail in that case. |
| * The driver should not call cfg80211_sched_scan_stopped() for a requested |
| * stop (when this method returns 0). |
| * |
| * @mgmt_frame_register: Notify driver that a management frame type was |
| * registered. The callback is allowed to sleep. |
| * |
| * @set_antenna: Set antenna configuration (tx_ant, rx_ant) on the device. |
| * Parameters are bitmaps of allowed antennas to use for TX/RX. Drivers may |
| * reject TX/RX mask combinations they cannot support by returning -EINVAL |
| * (also see nl80211.h @NL80211_ATTR_WIPHY_ANTENNA_TX). |
| * |
| * @get_antenna: Get current antenna configuration from device (tx_ant, rx_ant). |
| * |
| * @tdls_mgmt: Transmit a TDLS management frame. |
| * @tdls_oper: Perform a high-level TDLS operation (e.g. TDLS link setup). |
| * |
| * @probe_client: probe an associated client, must return a cookie that it |
| * later passes to cfg80211_probe_status(). |
| * |
| * @set_noack_map: Set the NoAck Map for the TIDs. |
| * |
| * @get_channel: Get the current operating channel for the virtual interface. |
| * For monitor interfaces, it should return %NULL unless there's a single |
| * current monitoring channel. |
| * |
| * @start_p2p_device: Start the given P2P device. |
| * @stop_p2p_device: Stop the given P2P device. |
| * |
| * @set_mac_acl: Sets MAC address control list in AP and P2P GO mode. |
| * Parameters include ACL policy, an array of MAC address of stations |
| * and the number of MAC addresses. If there is already a list in driver |
| * this new list replaces the existing one. Driver has to clear its ACL |
| * when number of MAC addresses entries is passed as 0. Drivers which |
| * advertise the support for MAC based ACL have to implement this callback. |
| * |
| * @start_radar_detection: Start radar detection in the driver. |
| * |
| * @update_ft_ies: Provide updated Fast BSS Transition information to the |
| * driver. If the SME is in the driver/firmware, this information can be |
| * used in building Authentication and Reassociation Request frames. |
| * |
| * @crit_proto_start: Indicates a critical protocol needs more link reliability |
| * for a given duration (milliseconds). The protocol is provided so the |
| * driver can take the most appropriate actions. |
| * @crit_proto_stop: Indicates critical protocol no longer needs increased link |
| * reliability. This operation can not fail. |
| * @set_coalesce: Set coalesce parameters. |
| * |
| * @channel_switch: initiate channel-switch procedure (with CSA). Driver is |
| * responsible for veryfing if the switch is possible. Since this is |
| * inherently tricky driver may decide to disconnect an interface later |
| * with cfg80211_stop_iface(). This doesn't mean driver can accept |
| * everything. It should do it's best to verify requests and reject them |
| * as soon as possible. |
| * |
| * @set_qos_map: Set QoS mapping information to the driver |
| * |
| * @set_ap_chanwidth: Set the AP (including P2P GO) mode channel width for the |
| * given interface This is used e.g. for dynamic HT 20/40 MHz channel width |
| * changes during the lifetime of the BSS. |
| * |
| * @add_tx_ts: validate (if admitted_time is 0) or add a TX TS to the device |
| * with the given parameters; action frame exchange has been handled by |
| * userspace so this just has to modify the TX path to take the TS into |
| * account. |
| * If the admitted time is 0 just validate the parameters to make sure |
| * the session can be created at all; it is valid to just always return |
| * success for that but that may result in inefficient behaviour (handshake |
| * with the peer followed by immediate teardown when the addition is later |
| * rejected) |
| * @del_tx_ts: remove an existing TX TS |
| * |
| * @join_ocb: join the OCB network with the specified parameters |
| * (invoked with the wireless_dev mutex held) |
| * @leave_ocb: leave the current OCB network |
| * (invoked with the wireless_dev mutex held) |
| * |
| * @tdls_channel_switch: Start channel-switching with a TDLS peer. The driver |
| * is responsible for continually initiating channel-switching operations |
| * and returning to the base channel for communication with the AP. |
| * @tdls_cancel_channel_switch: Stop channel-switching with a TDLS peer. Both |
| * peers must be on the base channel when the call completes. |
| * @start_nan: Start the NAN interface. |
| * @stop_nan: Stop the NAN interface. |
| * @add_nan_func: Add a NAN function. Returns negative value on failure. |
| * On success @nan_func ownership is transferred to the driver and |
| * it may access it outside of the scope of this function. The driver |
| * should free the @nan_func when no longer needed by calling |
| * cfg80211_free_nan_func(). |
| * On success the driver should assign an instance_id in the |
| * provided @nan_func. |
| * @del_nan_func: Delete a NAN function. |
| * @nan_change_conf: changes NAN configuration. The changed parameters must |
| * be specified in @changes (using &enum cfg80211_nan_conf_changes); |
| * All other parameters must be ignored. |
| * |
| * @set_multicast_to_unicast: configure multicast to unicast conversion for BSS |
| * |
| * @set_pmk: configure the PMK to be used for offloaded 802.1X 4-Way handshake. |
| * If not deleted through @del_pmk the PMK remains valid until disconnect |
| * upon which the driver should clear it. |
| * (invoked with the wireless_dev mutex held) |
| * @del_pmk: delete the previously configured PMK for the given authenticator. |
| * (invoked with the wireless_dev mutex held) |
| */ |
| struct cfg80211_ops { |
| int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow); |
| int (*resume)(struct wiphy *wiphy); |
| void (*set_wakeup)(struct wiphy *wiphy, bool enabled); |
| |
| struct wireless_dev * (*add_virtual_intf)(struct wiphy *wiphy, |
| const char *name, |
| unsigned char name_assign_type, |
| enum nl80211_iftype type, |
| struct vif_params *params); |
| int (*del_virtual_intf)(struct wiphy *wiphy, |
| struct wireless_dev *wdev); |
| int (*change_virtual_intf)(struct wiphy *wiphy, |
| struct net_device *dev, |
| enum nl80211_iftype type, |
| struct vif_params *params); |
| |
| int (*add_key)(struct wiphy *wiphy, struct net_device *netdev, |
| u8 key_index, bool pairwise, const u8 *mac_addr, |
| struct key_params *params); |
| int (*get_key)(struct wiphy *wiphy, struct net_device *netdev, |
| u8 key_index, bool pairwise, const u8 *mac_addr, |
| void *cookie, |
| void (*callback)(void *cookie, struct key_params*)); |
| int (*del_key)(struct wiphy *wiphy, struct net_device *netdev, |
| u8 key_index, bool pairwise, const u8 *mac_addr); |
| int (*set_default_key)(struct wiphy *wiphy, |
| struct net_device *netdev, |
| u8 key_index, bool unicast, bool multicast); |
| int (*set_default_mgmt_key)(struct wiphy *wiphy, |
| struct net_device *netdev, |
| u8 key_index); |
| |
| int (*start_ap)(struct wiphy *wiphy, struct net_device *dev, |
| struct cfg80211_ap_settings *settings); |
| int (*change_beacon)(struct wiphy *wiphy, struct net_device *dev, |
| struct cfg80211_beacon_data *info); |
| int (*stop_ap)(struct wiphy *wiphy, struct net_device *dev); |
| |
| |
| int (*add_station)(struct wiphy *wiphy, struct net_device *dev, |
| const u8 *mac, |
| struct station_parameters *params); |
| int (*del_station)(struct wiphy *wiphy, struct net_device *dev, |
| struct station_del_parameters *params); |
| int (*change_station)(struct wiphy *wiphy, struct net_device *dev, |
| const u8 *mac, |
| struct station_parameters *params); |
| int (*get_station)(struct wiphy *wiphy, struct net_device *dev, |
| const u8 *mac, struct station_info *sinfo); |
| int (*dump_station)(struct wiphy *wiphy, struct net_device *dev, |
| int idx, u8 *mac, struct station_info *sinfo); |
| |
| int (*add_mpath)(struct wiphy *wiphy, struct net_device *dev, |
| const u8 *dst, const u8 *next_hop); |
| int (*del_mpath)(struct wiphy *wiphy, struct net_device *dev, |
| const u8 *dst); |
| int (*change_mpath)(struct wiphy *wiphy, struct net_device *dev, |
| const u8 *dst, const u8 *next_hop); |
| int (*get_mpath)(struct wiphy *wiphy, struct net_device *dev, |
| u8 *dst, u8 *next_hop, struct mpath_info *pinfo); |
| int (*dump_mpath)(struct wiphy *wiphy, struct net_device *dev, |
| int idx, u8 *dst, u8 *next_hop, |
| struct mpath_info *pinfo); |
| int (*get_mpp)(struct wiphy *wiphy, struct net_device *dev, |
| u8 *dst, u8 *mpp, struct mpath_info *pinfo); |
| int (*dump_mpp)(struct wiphy *wiphy, struct net_device *dev, |
| int idx, u8 *dst, u8 *mpp, |
| struct mpath_info *pinfo); |
| int (*get_mesh_config)(struct wiphy *wiphy, |
| struct net_device *dev, |
| struct mesh_config *conf); |
| int (*update_mesh_config)(struct wiphy *wiphy, |
| struct net_device *dev, u32 mask, |
| const struct mesh_config *nconf); |
| int (*join_mesh)(struct wiphy *wiphy, struct net_device *dev, |
| const struct mesh_config *conf, |
| const struct mesh_setup *setup); |
| int (*leave_mesh)(struct wiphy *wiphy, struct net_device *dev); |
| |
| int (*join_ocb)(struct wiphy *wiphy, struct net_device *dev, |
| struct ocb_setup *setup); |
| int (*leave_ocb)(struct wiphy *wiphy, struct net_device *dev); |
| |
| int (*change_bss)(struct wiphy *wiphy, struct net_device *dev, |
| struct bss_parameters *params); |
| |
| int (*set_txq_params)(struct wiphy *wiphy, struct net_device *dev, |
| struct ieee80211_txq_params *params); |
| |
| int (*libertas_set_mesh_channel)(struct wiphy *wiphy, |
| struct net_device *dev, |
| struct ieee80211_channel *chan); |
| |
| int (*set_monitor_channel)(struct wiphy *wiphy, |
| struct cfg80211_chan_def *chandef); |
| |
| int (*scan)(struct wiphy *wiphy, |
| struct cfg80211_scan_request *request); |
| void (*abort_scan)(struct wiphy *wiphy, struct wireless_dev *wdev); |
| |
| int (*auth)(struct wiphy *wiphy, struct net_device *dev, |
| struct cfg80211_auth_request *req); |
| int (*assoc)(struct wiphy *wiphy, struct net_device *dev, |
| struct cfg80211_assoc_request *req); |
| int (*deauth)(struct wiphy *wiphy, struct net_device *dev, |
| struct cfg80211_deauth_request *req); |
| int (*disassoc)(struct wiphy *wiphy, struct net_device *dev, |
| struct cfg80211_disassoc_request *req); |
| |
| int (*connect)(struct wiphy *wiphy, struct net_device *dev, |
| struct cfg80211_connect_params *sme); |
| int (*update_connect_params)(struct wiphy *wiphy, |
| struct net_device *dev, |
| struct cfg80211_connect_params *sme, |
| u32 changed); |
| int (*disconnect)(struct wiphy *wiphy, struct net_device *dev, |
| u16 reason_code); |
| |
| int (*join_ibss)(struct wiphy *wiphy, struct net_device *dev, |
| struct cfg80211_ibss_params *params); |
| int (*leave_ibss)(struct wiphy *wiphy, struct net_device *dev); |
| |
| int (*set_mcast_rate)(struct wiphy *wiphy, struct net_device *dev, |
| int rate[NUM_NL80211_BANDS]); |
| |
| int (*set_wiphy_params)(struct wiphy *wiphy, u32 changed); |
| |
| int (*set_tx_power)(struct wiphy *wiphy, struct wireless_dev *wdev, |
| enum nl80211_tx_power_setting type, int mbm); |
| int (*get_tx_power)(struct wiphy *wiphy, struct wireless_dev *wdev, |
| int *dbm); |
| |
| int (*set_wds_peer)(struct wiphy *wiphy, struct net_device *dev, |
| const u8 *addr); |
| |
| void (*rfkill_poll)(struct wiphy *wiphy); |
| |
| #ifdef CONFIG_NL80211_TESTMODE |
| int (*testmode_cmd)(struct wiphy *wiphy, struct wireless_dev *wdev, |
| void *data, int len); |
| int (*testmode_dump)(struct wiphy *wiphy, struct sk_buff *skb, |
| struct netlink_callback *cb, |
| void *data, int len); |
| #endif |
| |
| int (*set_bitrate_mask)(struct wiphy *wiphy, |
| struct net_device *dev, |
| const u8 *peer, |
| const struct cfg80211_bitrate_mask *mask); |
| |
| int (*dump_survey)(struct wiphy *wiphy, struct net_device *netdev, |
| int idx, struct survey_info *info); |
| |
| int (*set_pmksa)(struct wiphy *wiphy, struct net_device *netdev, |
| struct cfg80211_pmksa *pmksa); |
| int (*del_pmksa)(struct wiphy *wiphy, struct net_device *netdev, |
| struct cfg80211_pmksa *pmksa); |
| int (*flush_pmksa)(struct wiphy *wiphy, struct net_device *netdev); |
| |
| int (*remain_on_channel)(struct wiphy *wiphy, |
| struct wireless_dev *wdev, |
| struct ieee80211_channel *chan, |
| unsigned int duration, |
| u64 *cookie); |
| int (*cancel_remain_on_channel)(struct wiphy *wiphy, |
| struct wireless_dev *wdev, |
| u64 cookie); |
| |
| int (*mgmt_tx)(struct wiphy *wiphy, struct wireless_dev *wdev, |
| struct cfg80211_mgmt_tx_params *params, |
| u64 *cookie); |
| int (*mgmt_tx_cancel_wait)(struct wiphy *wiphy, |
| struct wireless_dev *wdev, |
| u64 cookie); |
| |
| int (*set_power_mgmt)(struct wiphy *wiphy, struct net_device *dev, |
| bool enabled, int timeout); |
| |
| int (*set_cqm_rssi_config)(struct wiphy *wiphy, |
| struct net_device *dev, |
| s32 rssi_thold, u32 rssi_hyst); |
| |
| int (*set_cqm_rssi_range_config)(struct wiphy *wiphy, |
| struct net_device *dev, |
| s32 rssi_low, s32 rssi_high); |
| |
| int (*set_cqm_txe_config)(struct wiphy *wiphy, |
| struct net_device *dev, |
| u32 rate, u32 pkts, u32 intvl); |
| |
| void (*mgmt_frame_register)(struct wiphy *wiphy, |
| struct wireless_dev *wdev, |
| u16 frame_type, bool reg); |
| |
| int (*set_antenna)(struct wiphy *wiphy, u32 tx_ant, u32 rx_ant); |
| int (*get_antenna)(struct wiphy *wiphy, u32 *tx_ant, u32 *rx_ant); |
| |
| int (*sched_scan_start)(struct wiphy *wiphy, |
| struct net_device *dev, |
| struct cfg80211_sched_scan_request *request); |
| int (*sched_scan_stop)(struct wiphy *wiphy, struct net_device *dev, |
| u64 reqid); |
| |
| int (*set_rekey_data)(struct wiphy *wiphy, struct net_device *dev, |
| struct cfg80211_gtk_rekey_data *data); |
| |
| int (*tdls_mgmt)(struct wiphy *wiphy, struct net_device *dev, |
| const u8 *peer, u8 action_code, u8 dialog_token, |
| u16 status_code, u32 peer_capability, |
| bool initiator, const u8 *buf, size_t len); |
| int (*tdls_oper)(struct wiphy *wiphy, struct net_device *dev, |
| const u8 *peer, enum nl80211_tdls_operation oper); |
| |
| int (*probe_client)(struct wiphy *wiphy, struct net_device *dev, |
| const u8 *peer, u64 *cookie); |
| |
| int (*set_noack_map)(struct wiphy *wiphy, |
| struct net_device *dev, |
| u16 noack_map); |
| |
| int (*get_channel)(struct wiphy *wiphy, |
| struct wireless_dev *wdev, |
| struct cfg80211_chan_def *chandef); |
| |
| int (*start_p2p_device)(struct wiphy *wiphy, |
| struct wireless_dev *wdev); |
| void (*stop_p2p_device)(struct wiphy *wiphy, |
| struct wireless_dev *wdev); |
| |
| int (*set_mac_acl)(struct wiphy *wiphy, struct net_device *dev, |
| const struct cfg80211_acl_data *params); |
| |
| int (*start_radar_detection)(struct wiphy *wiphy, |
| struct net_device *dev, |
| struct cfg80211_chan_def *chandef, |
| u32 cac_time_ms); |
| int (*update_ft_ies)(struct wiphy *wiphy, struct net_device *dev, |
| struct cfg80211_update_ft_ies_params *ftie); |
| int (*crit_proto_start)(struct wiphy *wiphy, |
| struct wireless_dev *wdev, |
| enum nl80211_crit_proto_id protocol, |
| u16 duration); |
| void (*crit_proto_stop)(struct wiphy *wiphy, |
| struct wireless_dev *wdev); |
| int (*set_coalesce)(struct wiphy *wiphy, |
| struct cfg80211_coalesce *coalesce); |
| |
| int (*channel_switch)(struct wiphy *wiphy, |
| struct net_device *dev, |
| struct cfg80211_csa_settings *params); |
| |
| int (*set_qos_map)(struct wiphy *wiphy, |
| struct net_device *dev, |
| struct cfg80211_qos_map *qos_map); |
| |
| int (*set_ap_chanwidth)(struct wiphy *wiphy, struct net_device *dev, |
| struct cfg80211_chan_def *chandef); |
| |
| int (*add_tx_ts)(struct wiphy *wiphy, struct net_device *dev, |
| u8 tsid, const u8 *peer, u8 user_prio, |
| u16 admitted_time); |
| int (*del_tx_ts)(struct wiphy *wiphy, struct net_device *dev, |
| u8 tsid, const u8 *peer); |
| |
| int (*tdls_channel_switch)(struct wiphy *wiphy, |
| struct net_device *dev, |
| const u8 *addr, u8 oper_class, |
| struct cfg80211_chan_def *chandef); |
| void (*tdls_cancel_channel_switch)(struct wiphy *wiphy, |
| struct net_device *dev, |
| const u8 *addr); |
| int (*start_nan)(struct wiphy *wiphy, struct wireless_dev *wdev, |
| struct cfg80211_nan_conf *conf); |
| void (*stop_nan)(struct wiphy *wiphy, struct wireless_dev *wdev); |
| int (*add_nan_func)(struct wiphy *wiphy, struct wireless_dev *wdev, |
| struct cfg80211_nan_func *nan_func); |
| void (*del_nan_func)(struct wiphy *wiphy, struct wireless_dev *wdev, |
| u64 cookie); |
| int (*nan_change_conf)(struct wiphy *wiphy, |
| struct wireless_dev *wdev, |
| struct cfg80211_nan_conf *conf, |
| u32 changes); |
| |
| int (*set_multicast_to_unicast)(struct wiphy *wiphy, |
| struct net_device *dev, |
| const bool enabled); |
| |
| int (*set_pmk)(struct wiphy *wiphy, struct net_device *dev, |
| const struct cfg80211_pmk_conf *conf); |
| int (*del_pmk)(struct wiphy *wiphy, struct net_device *dev, |
| const u8 *aa); |
| }; |
| |
| /* |
| * wireless hardware and networking interfaces structures |
| * and registration/helper functions |
| */ |
| |
| /** |
| * enum wiphy_flags - wiphy capability flags |
| * |
| * @WIPHY_FLAG_NETNS_OK: if not set, do not allow changing the netns of this |
| * wiphy at all |
| * @WIPHY_FLAG_PS_ON_BY_DEFAULT: if set to true, powersave will be enabled |
| * by default -- this flag will be set depending on the kernel's default |
| * on wiphy_new(), but can be changed by the driver if it has a good |
| * reason to override the default |
| * @WIPHY_FLAG_4ADDR_AP: supports 4addr mode even on AP (with a single station |
| * on a VLAN interface) |
| * @WIPHY_FLAG_4ADDR_STATION: supports 4addr mode even as a station |
| * @WIPHY_FLAG_CONTROL_PORT_PROTOCOL: This device supports setting the |
| * control port protocol ethertype. The device also honours the |
| * control_port_no_encrypt flag. |
| * @WIPHY_FLAG_IBSS_RSN: The device supports IBSS RSN. |
| * @WIPHY_FLAG_MESH_AUTH: The device supports mesh authentication by routing |
| * auth frames to userspace. See @NL80211_MESH_SETUP_USERSPACE_AUTH. |
| * @WIPHY_FLAG_SUPPORTS_SCHED_SCAN: The device supports scheduled scans. |
| * @WIPHY_FLAG_SUPPORTS_FW_ROAM: The device supports roaming feature in the |
| * firmware. |
| * @WIPHY_FLAG_AP_UAPSD: The device supports uapsd on AP. |
| * @WIPHY_FLAG_SUPPORTS_TDLS: The device supports TDLS (802.11z) operation. |
| * @WIPHY_FLAG_TDLS_EXTERNAL_SETUP: The device does not handle TDLS (802.11z) |
| * link setup/discovery operations internally. Setup, discovery and |
| * teardown packets should be sent through the @NL80211_CMD_TDLS_MGMT |
| * command. When this flag is not set, @NL80211_CMD_TDLS_OPER should be |
| * used for asking the driver/firmware to perform a TDLS operation. |
| * @WIPHY_FLAG_HAVE_AP_SME: device integrates AP SME |
| * @WIPHY_FLAG_REPORTS_OBSS: the device will report beacons from other BSSes |
| * when there are virtual interfaces in AP mode by calling |
| * cfg80211_report_obss_beacon(). |
| * @WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD: When operating as an AP, the device |
| * responds to probe-requests in hardware. |
| * @WIPHY_FLAG_OFFCHAN_TX: Device supports direct off-channel TX. |
| * @WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL: Device supports remain-on-channel call. |
| * @WIPHY_FLAG_SUPPORTS_5_10_MHZ: Device supports 5 MHz and 10 MHz channels. |
| * @WIPHY_FLAG_HAS_CHANNEL_SWITCH: Device supports channel switch in |
| * beaconing mode (AP, IBSS, Mesh, ...). |
| * @WIPHY_FLAG_HAS_STATIC_WEP: The device supports static WEP key installation |
| * before connection. |
| */ |
| enum wiphy_flags { |
| /* use hole at 0 */ |
| /* use hole at 1 */ |
| /* use hole at 2 */ |
| WIPHY_FLAG_NETNS_OK = BIT(3), |
| WIPHY_FLAG_PS_ON_BY_DEFAULT = BIT(4), |
| WIPHY_FLAG_4ADDR_AP = BIT(5), |
| WIPHY_FLAG_4ADDR_STATION = BIT(6), |
| WIPHY_FLAG_CONTROL_PORT_PROTOCOL = BIT(7), |
| WIPHY_FLAG_IBSS_RSN = BIT(8), |
| WIPHY_FLAG_MESH_AUTH = BIT(10), |
| /* use hole at 11 */ |
| /* use hole at 12 */ |
| WIPHY_FLAG_SUPPORTS_FW_ROAM = BIT(13), |
| WIPHY_FLAG_AP_UAPSD = BIT(14), |
| WIPHY_FLAG_SUPPORTS_TDLS = BIT(15), |
| WIPHY_FLAG_TDLS_EXTERNAL_SETUP = BIT(16), |
| WIPHY_FLAG_HAVE_AP_SME = BIT(17), |
| WIPHY_FLAG_REPORTS_OBSS = BIT(18), |
| WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD = BIT(19), |
| WIPHY_FLAG_OFFCHAN_TX = BIT(20), |
| WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL = BIT(21), |
| WIPHY_FLAG_SUPPORTS_5_10_MHZ = BIT(22), |
| WIPHY_FLAG_HAS_CHANNEL_SWITCH = BIT(23), |
| WIPHY_FLAG_HAS_STATIC_WEP = BIT(24), |
| }; |
| |
| /** |
| * struct ieee80211_iface_limit - limit on certain interface types |
| * @max: maximum number of interfaces of these types |
| * @types: interface types (bits) |
| */ |
| struct ieee80211_iface_limit { |
| u16 max; |
| u16 types; |
| }; |
| |
| /** |
| * struct ieee80211_iface_combination - possible interface combination |
| * |
| * With this structure the driver can describe which interface |
| * combinations it supports concurrently. |
| * |
| * Examples: |
| * |
| * 1. Allow #STA <= 1, #AP <= 1, matching BI, channels = 1, 2 total: |
| * |
| * .. code-block:: c |
| * |
| * struct ieee80211_iface_limit limits1[] = { |
| * { .max = 1, .types = BIT(NL80211_IFTYPE_STATION), }, |
| * { .max = 1, .types = BIT(NL80211_IFTYPE_AP}, }, |
| * }; |
| * struct ieee80211_iface_combination combination1 = { |
| * .limits = limits1, |
| * .n_limits = ARRAY_SIZE(limits1), |
| * .max_interfaces = 2, |
| * .beacon_int_infra_match = true, |
| * }; |
| * |
| * |
| * 2. Allow #{AP, P2P-GO} <= 8, channels = 1, 8 total: |
| * |
| * .. code-block:: c |
| * |
| * struct ieee80211_iface_limit limits2[] = { |
| * { .max = 8, .types = BIT(NL80211_IFTYPE_AP) | |
| * BIT(NL80211_IFTYPE_P2P_GO), }, |
| * }; |
| * struct ieee80211_iface_combination combination2 = { |
| * .limits = limits2, |
| * .n_limits = ARRAY_SIZE(limits2), |
| * .max_interfaces = 8, |
| * .num_different_channels = 1, |
| * }; |
| * |
| * |
| * 3. Allow #STA <= 1, #{P2P-client,P2P-GO} <= 3 on two channels, 4 total. |
| * |
| * This allows for an infrastructure connection and three P2P connections. |
| * |
| * .. code-block:: c |
| * |
| * struct ieee80211_iface_limit limits3[] = { |
| * { .max = 1, .types = BIT(NL80211_IFTYPE_STATION), }, |
| * { .max = 3, .types = BIT(NL80211_IFTYPE_P2P_GO) | |
| * BIT(NL80211_IFTYPE_P2P_CLIENT), }, |
| * }; |
| * struct ieee80211_iface_combination combination3 = { |
| * .limits = limits3, |
| * .n_limits = ARRAY_SIZE(limits3), |
| * .max_interfaces = 4, |
| * .num_different_channels = 2, |
| * }; |
| * |
| */ |
| struct ieee80211_iface_combination { |
| /** |
| * @limits: |
| * limits for the given interface types |
| */ |
| const struct ieee80211_iface_limit *limits; |
| |
| /** |
| * @num_different_channels: |
| * can use up to this many different channels |
| */ |
| u32 num_different_channels; |
| |
| /** |
| * @max_interfaces: |
| * maximum number of interfaces in total allowed in this group |
| */ |
| u16 max_interfaces; |
| |
| /** |
| * @n_limits: |
| * number of limitations |
| */ |
| u8 n_limits; |
| |
| /** |
| * @beacon_int_infra_match: |
| * In this combination, the beacon intervals between infrastructure |
| * and AP types must match. This is required only in special cases. |
| */ |
| bool beacon_int_infra_match; |
| |
| /** |
| * @radar_detect_widths: |
| * bitmap of channel widths supported for radar detection |
| */ |
| u8 radar_detect_widths; |
| |
| /** |
| * @radar_detect_regions: |
| * bitmap of regions supported for radar detection |
| */ |
| u8 radar_detect_regions; |
| |
| /** |
| * @beacon_int_min_gcd: |
| * This interface combination supports different beacon intervals. |
| * |
| * = 0 |
| * all beacon intervals for different interface must be same. |
| * > 0 |
| * any beacon interval for the interface part of this combination AND |
| * GCD of all beacon intervals from beaconing interfaces of this |
| * combination must be greater or equal to this value. |
| */ |
| u32 beacon_int_min_gcd; |
| }; |
| |
| struct ieee80211_txrx_stypes { |
| u16 tx, rx; |
| }; |
| |
| /** |
| * enum wiphy_wowlan_support_flags - WoWLAN support flags |
| * @WIPHY_WOWLAN_ANY: supports wakeup for the special "any" |
| * trigger that keeps the device operating as-is and |
| * wakes up the host on any activity, for example a |
| * received packet that passed filtering; note that the |
| * packet should be preserved in that case |
| * @WIPHY_WOWLAN_MAGIC_PKT: supports wakeup on magic packet |
| * (see nl80211.h) |
| * @WIPHY_WOWLAN_DISCONNECT: supports wakeup on disconnect |
| * @WIPHY_WOWLAN_SUPPORTS_GTK_REKEY: supports GTK rekeying while asleep |
| * @WIPHY_WOWLAN_GTK_REKEY_FAILURE: supports wakeup on GTK rekey failure |
| * @WIPHY_WOWLAN_EAP_IDENTITY_REQ: supports wakeup on EAP identity request |
| * @WIPHY_WOWLAN_4WAY_HANDSHAKE: supports wakeup on 4-way handshake failure |
| * @WIPHY_WOWLAN_RFKILL_RELEASE: supports wakeup on RF-kill release |
| * @WIPHY_WOWLAN_NET_DETECT: supports wakeup on network detection |
| */ |
| enum wiphy_wowlan_support_flags { |
| WIPHY_WOWLAN_ANY = BIT(0), |
| WIPHY_WOWLAN_MAGIC_PKT = BIT(1), |
| WIPHY_WOWLAN_DISCONNECT = BIT(2), |
| WIPHY_WOWLAN_SUPPORTS_GTK_REKEY = BIT(3), |
| WIPHY_WOWLAN_GTK_REKEY_FAILURE = BIT(4), |
| WIPHY_WOWLAN_EAP_IDENTITY_REQ = BIT(5), |
| WIPHY_WOWLAN_4WAY_HANDSHAKE = BIT(6), |
| WIPHY_WOWLAN_RFKILL_RELEASE = BIT(7), |
| WIPHY_WOWLAN_NET_DETECT = BIT(8), |
| }; |
| |
| struct wiphy_wowlan_tcp_support { |
| const struct nl80211_wowlan_tcp_data_token_feature *tok; |
| u32 data_payload_max; |
| u32 data_interval_max; |
| u32 wake_payload_max; |
| bool seq; |
| }; |
| |
| /** |
| * struct wiphy_wowlan_support - WoWLAN support data |
| * @flags: see &enum wiphy_wowlan_support_flags |
| * @n_patterns: number of supported wakeup patterns |
| * (see nl80211.h for the pattern definition) |
| * @pattern_max_len: maximum length of each pattern |
| * @pattern_min_len: minimum length of each pattern |
| * @max_pkt_offset: maximum Rx packet offset |
| * @max_nd_match_sets: maximum number of matchsets for net-detect, |
| * similar, but not necessarily identical, to max_match_sets for |
| * scheduled scans. |
| * See &struct cfg80211_sched_scan_request.@match_sets for more |
| * details. |
| * @tcp: TCP wakeup support information |
| */ |
| struct wiphy_wowlan_support { |
| u32 flags; |
| int n_patterns; |
| int pattern_max_len; |
| int pattern_min_len; |
| int max_pkt_offset; |
| int max_nd_match_sets; |
| const struct wiphy_wowlan_tcp_support *tcp; |
| }; |
| |
| /** |
| * struct wiphy_coalesce_support - coalesce support data |
| * @n_rules: maximum number of coalesce rules |
| * @max_delay: maximum supported coalescing delay in msecs |
| * @n_patterns: number of supported patterns in a rule |
| * (see nl80211.h for the pattern definition) |
| * @pattern_max_len: maximum length of each pattern |
| * @pattern_min_len: minimum length of each pattern |
| * @max_pkt_offset: maximum Rx packet offset |
| */ |
| struct wiphy_coalesce_support { |
| int n_rules; |
| int max_delay; |
| int n_patterns; |
| int pattern_max_len; |
| int pattern_min_len; |
| int max_pkt_offset; |
| }; |
| |
| /** |
| * enum wiphy_vendor_command_flags - validation flags for vendor commands |
| * @WIPHY_VENDOR_CMD_NEED_WDEV: vendor command requires wdev |
| * @WIPHY_VENDOR_CMD_NEED_NETDEV: vendor command requires netdev |
| * @WIPHY_VENDOR_CMD_NEED_RUNNING: interface/wdev must be up & running |
| * (must be combined with %_WDEV or %_NETDEV) |
| */ |
| enum wiphy_vendor_command_flags { |
| WIPHY_VENDOR_CMD_NEED_WDEV = BIT(0), |
| WIPHY_VENDOR_CMD_NEED_NETDEV = BIT(1), |
| WIPHY_VENDOR_CMD_NEED_RUNNING = BIT(2), |
| }; |
| |
| /** |
| * struct wiphy_vendor_command - vendor command definition |
| * @info: vendor command identifying information, as used in nl80211 |
| * @flags: flags, see &enum wiphy_vendor_command_flags |
| * @doit: callback for the operation, note that wdev is %NULL if the |
| * flags didn't ask for a wdev and non-%NULL otherwise; the data |
| * pointer may be %NULL if userspace provided no data at all |
| * @dumpit: dump callback, for transferring bigger/multiple items. The |
| * @storage points to cb->args[5], ie. is preserved over the multiple |
| * dumpit calls. |
| * It's recommended to not have the same sub command with both @doit and |
| * @dumpit, so that userspace can assume certain ones are get and others |
| * are used with dump requests. |
| */ |
| struct wiphy_vendor_command { |
| struct nl80211_vendor_cmd_info info; |
| u32 flags; |
| int (*doit)(struct wiphy *wiphy, struct wireless_dev *wdev, |
| const void *data, int data_len); |
| int (*dumpit)(struct wiphy *wiphy, struct wireless_dev *wdev, |
| struct sk_buff *skb, const void *data, int data_len, |
| unsigned long *storage); |
| }; |
| |
| /** |
| * struct wiphy_iftype_ext_capab - extended capabilities per interface type |
| * @iftype: interface type |
| * @extended_capabilities: extended capabilities supported by the driver, |
| * additional capabilities might be supported by userspace; these are the |
| * 802.11 extended capabilities ("Extended Capabilities element") and are |
| * in the same format as in the information element. See IEEE Std |
| * 802.11-2012 8.4.2.29 for the defined fields. |
| * @extended_capabilities_mask: mask of the valid values |
| * @extended_capabilities_len: length of the extended capabilities |
| */ |
| struct wiphy_iftype_ext_capab { |
| enum nl80211_iftype iftype; |
| const u8 *extended_capabilities; |
| const u8 *extended_capabilities_mask; |
| u8 extended_capabilities_len; |
| }; |
| |
| /** |
| * struct wiphy - wireless hardware description |
| * @reg_notifier: the driver's regulatory notification callback, |
| * note that if your driver uses wiphy_apply_custom_regulatory() |
| * the reg_notifier's request can be passed as NULL |
| * @regd: the driver's regulatory domain, if one was requested via |
| * the regulatory_hint() API. This can be used by the driver |
| * on the reg_notifier() if it chooses to ignore future |
| * regulatory domain changes caused by other drivers. |
| * @signal_type: signal type reported in &struct cfg80211_bss. |
| * @cipher_suites: supported cipher suites |
| * @n_cipher_suites: number of supported cipher suites |
| * @retry_short: Retry limit for short frames (dot11ShortRetryLimit) |
| * @retry_long: Retry limit for long frames (dot11LongRetryLimit) |
| * @frag_threshold: Fragmentation threshold (dot11FragmentationThreshold); |
| * -1 = fragmentation disabled, only odd values >= 256 used |
| * @rts_threshold: RTS threshold (dot11RTSThreshold); -1 = RTS/CTS disabled |
| * @_net: the network namespace this wiphy currently lives in |
| * @perm_addr: permanent MAC address of this device |
| * @addr_mask: If the device supports multiple MAC addresses by masking, |
| * set this to a mask with variable bits set to 1, e.g. if the last |
| * four bits are variable then set it to 00-00-00-00-00-0f. The actual |
| * variable bits shall be determined by the interfaces added, with |
| * interfaces not matching the mask being rejected to be brought up. |
| * @n_addresses: number of addresses in @addresses. |
| * @addresses: If the device has more than one address, set this pointer |
| * to a list of addresses (6 bytes each). The first one will be used |
| * by default for perm_addr. In this case, the mask should be set to |
| * all-zeroes. In this case it is assumed that the device can handle |
| * the same number of arbitrary MAC addresses. |
| * @registered: protects ->resume and ->suspend sysfs callbacks against |
| * unregister hardware |
| * @debugfsdir: debugfs directory used for this wiphy, will be renamed |
| * automatically on wiphy renames |
| * @dev: (virtual) struct device for this wiphy |
| * @registered: helps synchronize suspend/resume with wiphy unregister |
| * @wext: wireless extension handlers |
| * @priv: driver private data (sized according to wiphy_new() parameter) |
| * @interface_modes: bitmask of interfaces types valid for this wiphy, |
| * must be set by driver |
| * @iface_combinations: Valid interface combinations array, should not |
| * list single interface types. |
| * @n_iface_combinations: number of entries in @iface_combinations array. |
| * @software_iftypes: bitmask of software interface types, these are not |
| * subject to any restrictions since they are purely managed in SW. |
| * @flags: wiphy flags, see &enum wiphy_flags |
| * @regulatory_flags: wiphy regulatory flags, see |
| * &enum ieee80211_regulatory_flags |
| * @features: features advertised to nl80211, see &enum nl80211_feature_flags. |
| * @ext_features: extended features advertised to nl80211, see |
| * &enum nl80211_ext_feature_index. |
| * @bss_priv_size: each BSS struct has private data allocated with it, |
| * this variable determines its size |
| * @max_scan_ssids: maximum number of SSIDs the device can scan for in |
| * any given scan |
| * @max_sched_scan_reqs: maximum number of scheduled scan requests that |
| * the device can run concurrently. |
| * @max_sched_scan_ssids: maximum number of SSIDs the device can scan |
| * for in any given scheduled scan |
| * @max_match_sets: maximum number of match sets the device can handle |
| * when performing a scheduled scan, 0 if filtering is not |
| * supported. |
| * @max_scan_ie_len: maximum length of user-controlled IEs device can |
| * add to probe request frames transmitted during a scan, must not |
| * include fixed IEs like supported rates |
| * @max_sched_scan_ie_len: same as max_scan_ie_len, but for scheduled |
| * scans |
| * @max_sched_scan_plans: maximum number of scan plans (scan interval and number |
| * of iterations) for scheduled scan supported by the device. |
| * @max_sched_scan_plan_interval: maximum interval (in seconds) for a |
| * single scan plan supported by the device. |
| * @max_sched_scan_plan_iterations: maximum number of iterations for a single |
| * scan plan supported by the device. |
| * @coverage_class: current coverage class |
| * @fw_version: firmware version for ethtool reporting |
| * @hw_version: hardware version for ethtool reporting |
| * @max_num_pmkids: maximum number of PMKIDs supported by device |
| * @privid: a pointer that drivers can use to identify if an arbitrary |
| * wiphy is theirs, e.g. in global notifiers |
| * @bands: information about bands/channels supported by this device |
| * |
| * @mgmt_stypes: bitmasks of frame subtypes that can be subscribed to or |
| * transmitted through nl80211, points to an array indexed by interface |
| * type |
| * |
| * @available_antennas_tx: bitmap of antennas which are available to be |
| * configured as TX antennas. Antenna configuration commands will be |
| * rejected unless this or @available_antennas_rx is set. |
| * |
| * @available_antennas_rx: bitmap of antennas which are available to be |
| * configured as RX antennas. Antenna configuration commands will be |
| * rejected unless this or @available_antennas_tx is set. |
| * |
| * @probe_resp_offload: |
| * Bitmap of supported protocols for probe response offloading. |
| * See &enum nl80211_probe_resp_offload_support_attr. Only valid |
| * when the wiphy flag @WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD is set. |
| * |
| * @max_remain_on_channel_duration: Maximum time a remain-on-channel operation |
| * may request, if implemented. |
| * |
| * @wowlan: WoWLAN support information |
| * @wowlan_config: current WoWLAN configuration; this should usually not be |
| * used since access to it is necessarily racy, use the parameter passed |
| * to the suspend() operation instead. |
| * |
| * @ap_sme_capa: AP SME capabilities, flags from &enum nl80211_ap_sme_features. |
| * @ht_capa_mod_mask: Specify what ht_cap values can be over-ridden. |
| * If null, then none can be over-ridden. |
| * @vht_capa_mod_mask: Specify what VHT capabilities can be over-ridden. |
| * If null, then none can be over-ridden. |
| * |
| * @wdev_list: the list of associated (virtual) interfaces; this list must |
| * not be modified by the driver, but can be read with RTNL/RCU protection. |
| * |
| * @max_acl_mac_addrs: Maximum number of MAC addresses that the device |
| * supports for ACL. |
| * |
| * @extended_capabilities: extended capabilities supported by the driver, |
| * additional capabilities might be supported by userspace; these are |
| * the 802.11 extended capabilities ("Extended Capabilities element") |
| * and are in the same format as in the information element. See |
| * 802.11-2012 8.4.2.29 for the defined fields. These are the default |
| * extended capabilities to be used if the capabilities are not specified |
| * for a specific interface type in iftype_ext_capab. |
| * @extended_capabilities_mask: mask of the valid values |
| * @extended_capabilities_len: length of the extended capabilities |
| * @iftype_ext_capab: array of extended capabilities per interface type |
| * @num_iftype_ext_capab: number of interface types for which extended |
| * capabilities are specified separately. |
| * @coalesce: packet coalescing support information |
| * |
| * @vendor_commands: array of vendor commands supported by the hardware |
| * @n_vendor_commands: number of vendor commands |
| * @vendor_events: array of vendor events supported by the hardware |
| * @n_vendor_events: number of vendor events |
| * |
| * @max_ap_assoc_sta: maximum number of associated stations supported in AP mode |
| * (including P2P GO) or 0 to indicate no such limit is advertised. The |
| * driver is allowed to advertise a theoretical limit that it can reach in |
| * some cases, but may not always reach. |
| * |
| * @max_num_csa_counters: Number of supported csa_counters in beacons |
| * and probe responses. This value should be set if the driver |
| * wis
|