Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/ppwaskie/net
Peter P Waskiewicz Jr says:
====================
This series contains fixes to the e1000e and igb drivers.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/Documentation/DocBook/filesystems.tmpl b/Documentation/DocBook/filesystems.tmpl
index 3fca32c..25b58ef 100644
--- a/Documentation/DocBook/filesystems.tmpl
+++ b/Documentation/DocBook/filesystems.tmpl
@@ -224,8 +224,8 @@
</para>
<para>
-Then at umount time , in your put_super() (2.4) or write_super() (2.5)
-you can then call journal_destroy() to clean up your in-core journal object.
+Then at umount time , in your put_super() you can then call journal_destroy()
+to clean up your in-core journal object.
</para>
<para>
diff --git a/Documentation/devicetree/bindings/arm/mrvl/intc.txt b/Documentation/devicetree/bindings/arm/mrvl/intc.txt
index 80b9a94..8b53273 100644
--- a/Documentation/devicetree/bindings/arm/mrvl/intc.txt
+++ b/Documentation/devicetree/bindings/arm/mrvl/intc.txt
@@ -38,3 +38,23 @@
reg-names = "mux status", "mux mask";
mrvl,intc-nr-irqs = <2>;
};
+
+* Marvell Orion Interrupt controller
+
+Required properties
+- compatible : Should be "marvell,orion-intc".
+- #interrupt-cells: Specifies the number of cells needed to encode an
+ interrupt source. Supported value is <1>.
+- interrupt-controller : Declare this node to be an interrupt controller.
+- reg : Interrupt mask address. A list of 4 byte ranges, one per controller.
+ One entry in the list represents 32 interrupts.
+
+Example:
+
+ intc: interrupt-controller {
+ compatible = "marvell,orion-intc", "marvell,intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0xfed20204 0x04>,
+ <0xfed20214 0x04>;
+ };
diff --git a/Documentation/devicetree/bindings/ata/marvell.txt b/Documentation/devicetree/bindings/ata/marvell.txt
new file mode 100644
index 0000000..b5cdd20
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/marvell.txt
@@ -0,0 +1,16 @@
+* Marvell Orion SATA
+
+Required Properties:
+- compatibility : "marvell,orion-sata"
+- reg : Address range of controller
+- interrupts : Interrupt controller is using
+- nr-ports : Number of SATA ports in use.
+
+Example:
+
+ sata@80000 {
+ compatible = "marvell,orion-sata";
+ reg = <0x80000 0x5000>;
+ interrupts = <21>;
+ nr-ports = <2>;
+ }
diff --git a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
index 05428f3..e137874 100644
--- a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
@@ -27,3 +27,26 @@
interrupt-controller;
#interrupt-cells = <1>;
};
+
+* Marvell Orion GPIO Controller
+
+Required properties:
+- compatible : Should be "marvell,orion-gpio"
+- reg : Address and length of the register set for controller.
+- gpio-controller : So we know this is a gpio controller.
+- ngpio : How many gpios this controller has.
+- interrupts : Up to 4 Interrupts for the controller.
+
+Optional properties:
+- mask-offset : For SMP Orions, offset for Nth CPU
+
+Example:
+
+ gpio0: gpio@10100 {
+ compatible = "marvell,orion-gpio";
+ #gpio-cells = <2>;
+ gpio-controller;
+ reg = <0x10100 0x40>;
+ ngpio = <32>;
+ interrupts = <35>, <36>, <37>, <38>;
+ };
diff --git a/Documentation/devicetree/bindings/watchdog/marvel.txt b/Documentation/devicetree/bindings/watchdog/marvel.txt
new file mode 100644
index 0000000..0b2503a
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/marvel.txt
@@ -0,0 +1,14 @@
+* Marvell Orion Watchdog Time
+
+Required Properties:
+
+- Compatibility : "marvell,orion-wdt"
+- reg : Address of the timer registers
+
+Example:
+
+ wdt@20300 {
+ compatible = "marvell,orion-wdt";
+ reg = <0x20300 0x28>;
+ status = "okay";
+ };
diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking
index 0f103e3..e540a24 100644
--- a/Documentation/filesystems/Locking
+++ b/Documentation/filesystems/Locking
@@ -114,7 +114,6 @@
int (*drop_inode) (struct inode *);
void (*evict_inode) (struct inode *);
void (*put_super) (struct super_block *);
- void (*write_super) (struct super_block *);
int (*sync_fs)(struct super_block *sb, int wait);
int (*freeze_fs) (struct super_block *);
int (*unfreeze_fs) (struct super_block *);
@@ -136,7 +135,6 @@
drop_inode: !!!inode->i_lock!!!
evict_inode:
put_super: write
-write_super: read
sync_fs: read
freeze_fs: write
unfreeze_fs: write
diff --git a/Documentation/filesystems/porting b/Documentation/filesystems/porting
index 2bef2b3..0742fee 100644
--- a/Documentation/filesystems/porting
+++ b/Documentation/filesystems/porting
@@ -94,9 +94,8 @@
---
[mandatory]
-BKL is also moved from around sb operations. ->write_super() Is now called
-without BKL held. BKL should have been shifted into individual fs sb_op
-functions. If you don't need it, remove it.
+BKL is also moved from around sb operations. BKL should have been shifted into
+individual fs sb_op functions. If you don't need it, remove it.
---
[informational]
diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt
index 065aa2d..2ee133e 100644
--- a/Documentation/filesystems/vfs.txt
+++ b/Documentation/filesystems/vfs.txt
@@ -216,7 +216,6 @@
void (*drop_inode) (struct inode *);
void (*delete_inode) (struct inode *);
void (*put_super) (struct super_block *);
- void (*write_super) (struct super_block *);
int (*sync_fs)(struct super_block *sb, int wait);
int (*freeze_fs) (struct super_block *);
int (*unfreeze_fs) (struct super_block *);
@@ -273,9 +272,6 @@
put_super: called when the VFS wishes to free the superblock
(i.e. unmount). This is called with the superblock lock held
- write_super: called when the VFS superblock needs to be written to
- disc. This method is optional
-
sync_fs: called when VFS is writing out all dirty data associated with
a superblock. The second parameter indicates whether the method
should wait until the write out has been completed. Optional.
diff --git a/Documentation/laptops/laptop-mode.txt b/Documentation/laptops/laptop-mode.txt
index 0bf25ee..4ebbfc3 100644
--- a/Documentation/laptops/laptop-mode.txt
+++ b/Documentation/laptops/laptop-mode.txt
@@ -262,9 +262,9 @@
#
# Allowed dirty background ratio, in percent. Once DIRTY_RATIO has been
-# exceeded, the kernel will wake pdflush which will then reduce the amount
-# of dirty memory to dirty_background_ratio. Set this nice and low, so once
-# some writeout has commenced, we do a lot of it.
+# exceeded, the kernel will wake flusher threads which will then reduce the
+# amount of dirty memory to dirty_background_ratio. Set this nice and low,
+# so once some writeout has commenced, we do a lot of it.
#
#DIRTY_BACKGROUND_RATIO=5
@@ -384,9 +384,9 @@
#
# Allowed dirty background ratio, in percent. Once DIRTY_RATIO has been
-# exceeded, the kernel will wake pdflush which will then reduce the amount
-# of dirty memory to dirty_background_ratio. Set this nice and low, so once
-# some writeout has commenced, we do a lot of it.
+# exceeded, the kernel will wake flusher threads which will then reduce the
+# amount of dirty memory to dirty_background_ratio. Set this nice and low,
+# so once some writeout has commenced, we do a lot of it.
#
DIRTY_BACKGROUND_RATIO=${DIRTY_BACKGROUND_RATIO:-'5'}
diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt
index dcc2a94..078701f 100644
--- a/Documentation/sysctl/vm.txt
+++ b/Documentation/sysctl/vm.txt
@@ -76,8 +76,8 @@
dirty_background_bytes
-Contains the amount of dirty memory at which the pdflush background writeback
-daemon will start writeback.
+Contains the amount of dirty memory at which the background kernel
+flusher threads will start writeback.
Note: dirty_background_bytes is the counterpart of dirty_background_ratio. Only
one of them may be specified at a time. When one sysctl is written it is
@@ -89,7 +89,7 @@
dirty_background_ratio
Contains, as a percentage of total system memory, the number of pages at which
-the pdflush background writeback daemon will start writing out dirty data.
+the background kernel flusher threads will start writing out dirty data.
==============================================================
@@ -112,9 +112,9 @@
dirty_expire_centisecs
This tunable is used to define when dirty data is old enough to be eligible
-for writeout by the pdflush daemons. It is expressed in 100'ths of a second.
-Data which has been dirty in-memory for longer than this interval will be
-written out next time a pdflush daemon wakes up.
+for writeout by the kernel flusher threads. It is expressed in 100'ths
+of a second. Data which has been dirty in-memory for longer than this
+interval will be written out next time a flusher thread wakes up.
==============================================================
@@ -128,7 +128,7 @@
dirty_writeback_centisecs
-The pdflush writeback daemons will periodically wake up and write `old' data
+The kernel flusher threads will periodically wake up and write `old' data
out to disk. This tunable expresses the interval between those wakeups, in
100'ths of a second.
diff --git a/MAINTAINERS b/MAINTAINERS
index 94b823f..63ce3a3 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5329,14 +5329,15 @@
M: Linus Walleij <linus.walleij@linaro.org>
S: Maintained
F: drivers/pinctrl/
+F: include/linux/pinctrl/
PIN CONTROLLER - ST SPEAR
-M: Viresh Kumar <viresh.linux@gmail.com>
+M: Viresh Kumar <viresh.linux@gmail.com>
L: spear-devel@list.st.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.st.com/spear
S: Maintained
-F: driver/pinctrl/spear/
+F: drivers/pinctrl/spear/
PKTCDVD DRIVER
M: Peter Osterlund <petero2@telia.com>
diff --git a/Makefile b/Makefile
index 8e4c0a7..ddf5be9 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 3
-PATCHLEVEL = 5
+PATCHLEVEL = 6
SUBLEVEL = 0
-EXTRAVERSION =
+EXTRAVERSION = -rc1
NAME = Saber-toothed Squirrel
# *DOCUMENTATION*
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 7980873..e91c7cd 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1151,6 +1151,7 @@
bool
select CLKSRC_MMIO
select GENERIC_IRQ_CHIP
+ select IRQ_DOMAIN
select COMMON_CLK
config PLAT_PXA
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
index e1fa7e6..71d6b5d 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -12,7 +12,7 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*
- * Contains definitions specific to the Armada 370 SoC that are not
+ * Contains definitions specific to the Armada XP SoC that are not
* common to all Armada SoCs.
*/
diff --git a/arch/arm/boot/dts/kirkwood-dns320.dts b/arch/arm/boot/dts/kirkwood-dns320.dts
index 9a33077..5bb0bf3 100644
--- a/arch/arm/boot/dts/kirkwood-dns320.dts
+++ b/arch/arm/boot/dts/kirkwood-dns320.dts
@@ -1,6 +1,6 @@
/dts-v1/;
-/include/ "kirkwood.dtsi"
+/include/ "kirkwood-dnskw.dtsi"
/ {
model = "D-Link DNS-320 NAS (Rev A1)";
@@ -15,6 +15,31 @@
bootargs = "console=ttyS0,115200n8 earlyprintk";
};
+ gpio-leds {
+ compatible = "gpio-leds";
+ blue-power {
+ label = "dns320:blue:power";
+ gpios = <&gpio0 26 1>; /* GPIO 26 Active Low */
+ linux,default-trigger = "default-on";
+ };
+ blue-usb {
+ label = "dns320:blue:usb";
+ gpios = <&gpio1 11 1>; /* GPIO 43 Active Low */
+ };
+ orange-l_hdd {
+ label = "dns320:orange:l_hdd";
+ gpios = <&gpio0 28 1>; /* GPIO 28 Active Low */
+ };
+ orange-r_hdd {
+ label = "dns320:orange:r_hdd";
+ gpios = <&gpio0 27 1>; /* GPIO 27 Active Low */
+ };
+ orange-usb {
+ label = "dns320:orange:usb";
+ gpios = <&gpio1 3 1>; /* GPIO 35 Active Low */
+ };
+ };
+
ocp@f1000000 {
serial@12000 {
clock-frequency = <166666667>;
@@ -25,40 +50,5 @@
clock-frequency = <166666667>;
status = "okay";
};
-
- nand@3000000 {
- status = "okay";
-
- partition@0 {
- label = "u-boot";
- reg = <0x0000000 0x100000>;
- read-only;
- };
-
- partition@100000 {
- label = "uImage";
- reg = <0x0100000 0x500000>;
- };
-
- partition@600000 {
- label = "ramdisk";
- reg = <0x0600000 0x500000>;
- };
-
- partition@b00000 {
- label = "image";
- reg = <0x0b00000 0x6600000>;
- };
-
- partition@7100000 {
- label = "mini firmware";
- reg = <0x7100000 0xa00000>;
- };
-
- partition@7b00000 {
- label = "config";
- reg = <0x7b00000 0x500000>;
- };
- };
};
};
diff --git a/arch/arm/boot/dts/kirkwood-dns325.dts b/arch/arm/boot/dts/kirkwood-dns325.dts
index 16734c1..d430713 100644
--- a/arch/arm/boot/dts/kirkwood-dns325.dts
+++ b/arch/arm/boot/dts/kirkwood-dns325.dts
@@ -1,6 +1,6 @@
/dts-v1/;
-/include/ "kirkwood.dtsi"
+/include/ "kirkwood-dnskw.dtsi"
/ {
model = "D-Link DNS-325 NAS (Rev A1)";
@@ -15,45 +15,43 @@
bootargs = "console=ttyS0,115200n8 earlyprintk";
};
+ gpio-leds {
+ compatible = "gpio-leds";
+ white-power {
+ label = "dns325:white:power";
+ gpios = <&gpio0 26 1>; /* GPIO 26 Active Low */
+ linux,default-trigger = "default-on";
+ };
+ white-usb {
+ label = "dns325:white:usb";
+ gpios = <&gpio1 11 1>; /* GPIO 43 Active Low */
+ };
+ red-l_hdd {
+ label = "dns325:red:l_hdd";
+ gpios = <&gpio0 28 1>; /* GPIO 28 Active Low */
+ };
+ red-r_hdd {
+ label = "dns325:red:r_hdd";
+ gpios = <&gpio0 27 1>; /* GPIO 27 Active Low */
+ };
+ red-usb {
+ label = "dns325:red:usb";
+ gpios = <&gpio0 29 1>; /* GPIO 29 Active Low */
+ };
+ };
+
ocp@f1000000 {
+ i2c@11000 {
+ status = "okay";
+
+ lm75: lm75@48 {
+ compatible = "national,lm75";
+ reg = <0x48>;
+ };
+ };
serial@12000 {
clock-frequency = <200000000>;
status = "okay";
};
-
- nand@3000000 {
- status = "okay";
-
- partition@0 {
- label = "u-boot";
- reg = <0x0000000 0x100000>;
- read-only;
- };
-
- partition@100000 {
- label = "uImage";
- reg = <0x0100000 0x500000>;
- };
-
- partition@600000 {
- label = "ramdisk";
- reg = <0x0600000 0x500000>;
- };
-
- partition@b00000 {
- label = "image";
- reg = <0x0b00000 0x6600000>;
- };
-
- partition@7100000 {
- label = "mini firmware";
- reg = <0x7100000 0xa00000>;
- };
-
- partition@7b00000 {
- label = "config";
- reg = <0x7b00000 0x500000>;
- };
- };
};
};
diff --git a/arch/arm/boot/dts/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/kirkwood-dnskw.dtsi
new file mode 100644
index 0000000..7408655
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-dnskw.dtsi
@@ -0,0 +1,69 @@
+/include/ "kirkwood.dtsi"
+
+/ {
+ model = "D-Link DNS NASes (kirkwood-based)";
+ compatible = "dlink,dns-kirkwood", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ button@1 {
+ label = "Power button";
+ linux,code = <116>;
+ gpios = <&gpio1 2 1>;
+ };
+ button@2 {
+ label = "USB unmount button";
+ linux,code = <161>;
+ gpios = <&gpio1 15 1>;
+ };
+ button@3 {
+ label = "Reset button";
+ linux,code = <0x198>;
+ gpios = <&gpio1 16 1>;
+ };
+ };
+
+ ocp@f1000000 {
+ sata@80000 {
+ status = "okay";
+ nr-ports = <2>;
+ };
+
+ nand@3000000 {
+ status = "okay";
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0000000 0x100000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "uImage";
+ reg = <0x0100000 0x500000>;
+ };
+
+ partition@600000 {
+ label = "ramdisk";
+ reg = <0x0600000 0x500000>;
+ };
+
+ partition@b00000 {
+ label = "image";
+ reg = <0x0b00000 0x6600000>;
+ };
+
+ partition@7100000 {
+ label = "mini firmware";
+ reg = <0x7100000 0xa00000>;
+ };
+
+ partition@7b00000 {
+ label = "config";
+ reg = <0x7b00000 0x500000>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts
index 78b0f06..26e281f 100644
--- a/arch/arm/boot/dts/kirkwood-dreamplug.dts
+++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts
@@ -20,5 +20,55 @@
clock-frequency = <200000000>;
status = "ok";
};
+
+ spi@10600 {
+ status = "okay";
+
+ m25p40@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "mx25l1606e";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ mode = <0>;
+
+ partition@0 {
+ reg = <0x0 0x80000>;
+ label = "u-boot";
+ };
+
+ partition@100000 {
+ reg = <0x100000 0x10000>;
+ label = "u-boot env";
+ };
+
+ partition@180000 {
+ reg = <0x180000 0x10000>;
+ label = "dtb";
+ };
+ };
+ };
+
+ sata@80000 {
+ status = "okay";
+ nr-ports = <1>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ bluetooth {
+ label = "dreamplug:blue:bluetooth";
+ gpios = <&gpio1 15 1>;
+ };
+ wifi {
+ label = "dreamplug:green:wifi";
+ gpios = <&gpio1 16 1>;
+ };
+ wifi-ap {
+ label = "dreamplug:green:wifi_ap";
+ gpios = <&gpio1 17 1>;
+ };
};
};
diff --git a/arch/arm/boot/dts/kirkwood-goflexnet.dts b/arch/arm/boot/dts/kirkwood-goflexnet.dts
new file mode 100644
index 0000000..7c8238f
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts
@@ -0,0 +1,99 @@
+/dts-v1/;
+
+/include/ "kirkwood.dtsi"
+
+/ {
+ model = "Seagate GoFlex Net";
+ compatible = "seagate,goflexnet", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
+ };
+
+ ocp@f1000000 {
+ serial@12000 {
+ clock-frequency = <200000000>;
+ status = "ok";
+ };
+
+ nand@3000000 {
+ status = "okay";
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0000000 0x100000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "uImage";
+ reg = <0x0100000 0x400000>;
+ };
+
+ partition@500000 {
+ label = "pogoplug";
+ reg = <0x0500000 0x2000000>;
+ };
+
+ partition@2500000 {
+ label = "root";
+ reg = <0x02500000 0xd800000>;
+ };
+ };
+ sata@80000 {
+ status = "okay";
+ nr-ports = <2>;
+ };
+
+ };
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ health {
+ label = "status:green:health";
+ gpios = <&gpio1 14 1>;
+ linux,default-trigger = "default-on";
+ };
+ fault {
+ label = "status:orange:fault";
+ gpios = <&gpio1 15 1>;
+ };
+ left0 {
+ label = "status:white:left0";
+ gpios = <&gpio1 10 0>;
+ };
+ left1 {
+ label = "status:white:left1";
+ gpios = <&gpio1 11 0>;
+ };
+ left2 {
+ label = "status:white:left2";
+ gpios = <&gpio1 12 0>;
+ };
+ left3 {
+ label = "status:white:left3";
+ gpios = <&gpio1 13 0>;
+ };
+ right0 {
+ label = "status:white:right0";
+ gpios = <&gpio1 6 0>;
+ };
+ right1 {
+ label = "status:white:right1";
+ gpios = <&gpio1 7 0>;
+ };
+ right2 {
+ label = "status:white:right2";
+ gpios = <&gpio1 8 0>;
+ };
+ right3 {
+ label = "status:white:right3";
+ gpios = <&gpio1 9 0>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts
index f59dcf6..66794ed 100644
--- a/arch/arm/boot/dts/kirkwood-ib62x0.dts
+++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts
@@ -21,6 +21,11 @@
status = "okay";
};
+ sata@80000 {
+ status = "okay";
+ nr-ports = <2>;
+ };
+
nand@3000000 {
status = "okay";
@@ -41,4 +46,37 @@
};
};
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ button@1 {
+ label = "USB Copy";
+ linux,code = <133>;
+ gpios = <&gpio0 29 1>;
+ };
+ button@2 {
+ label = "Reset";
+ linux,code = <0x198>;
+ gpios = <&gpio0 28 1>;
+ };
+ };
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ green-os {
+ label = "ib62x0:green:os";
+ gpios = <&gpio0 25 0>;
+ linux,default-trigger = "default-on";
+ };
+ red-os {
+ label = "ib62x0:red:os";
+ gpios = <&gpio0 22 0>;
+ };
+ usb-copy {
+ label = "ib62x0:red:usb_copy";
+ gpios = <&gpio0 27 0>;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts
index 026a1f8..52d9470 100644
--- a/arch/arm/boot/dts/kirkwood-iconnect.dts
+++ b/arch/arm/boot/dts/kirkwood-iconnect.dts
@@ -18,9 +18,51 @@
};
ocp@f1000000 {
+ i2c@11000 {
+ status = "okay";
+
+ lm63: lm63@4c {
+ compatible = "national,lm63";
+ reg = <0x4c>;
+ };
+ };
serial@12000 {
clock-frequency = <200000000>;
status = "ok";
};
};
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ led-level {
+ label = "led_level";
+ gpios = <&gpio1 9 0>;
+ linux,default-trigger = "default-on";
+ };
+ power-blue {
+ label = "power:blue";
+ gpios = <&gpio1 11 0>;
+ linux,default-trigger = "timer";
+ };
+ usb1 {
+ label = "usb1:blue";
+ gpios = <&gpio1 12 0>;
+ };
+ usb2 {
+ label = "usb2:blue";
+ gpios = <&gpio1 13 0>;
+ };
+ usb3 {
+ label = "usb3:blue";
+ gpios = <&gpio1 14 0>;
+ };
+ usb4 {
+ label = "usb4:blue";
+ gpios = <&gpio1 15 0>;
+ };
+ otb {
+ label = "otb:blue";
+ gpios = <&gpio1 16 0>;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/kirkwood-lschlv2.dts b/arch/arm/boot/dts/kirkwood-lschlv2.dts
new file mode 100644
index 0000000..9510c9e
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-lschlv2.dts
@@ -0,0 +1,20 @@
+/dts-v1/;
+
+/include/ "kirkwood-lsxl.dtsi"
+
+/ {
+ model = "Buffalo Linkstation LS-CHLv2";
+ compatible = "buffalo,lschlv2", "buffalo,lsxl", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x4000000>;
+ };
+
+ ocp@f1000000 {
+ serial@12000 {
+ clock-frequency = <166666667>;
+ status = "okay";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/kirkwood-lsxhl.dts b/arch/arm/boot/dts/kirkwood-lsxhl.dts
new file mode 100644
index 0000000..739019c
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-lsxhl.dts
@@ -0,0 +1,20 @@
+/dts-v1/;
+
+/include/ "kirkwood-lsxl.dtsi"
+
+/ {
+ model = "Buffalo Linkstation LS-XHL";
+ compatible = "buffalo,lsxhl", "buffalo,lsxl", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>;
+ };
+
+ ocp@f1000000 {
+ serial@12000 {
+ clock-frequency = <200000000>;
+ status = "okay";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi
new file mode 100644
index 0000000..8ac51c0
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi
@@ -0,0 +1,95 @@
+/include/ "kirkwood.dtsi"
+
+/ {
+ chosen {
+ bootargs = "console=ttyS0,115200n8 earlyprintk";
+ };
+
+ ocp@f1000000 {
+ sata@80000 {
+ status = "okay";
+ nr-ports = <1>;
+ };
+
+ spi@10600 {
+ status = "okay";
+
+ m25p40@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "m25p40";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+ mode = <0>;
+
+ partition@0 {
+ reg = <0x0 0x60000>;
+ label = "uboot";
+ read-only;
+ };
+
+ partition@60000 {
+ reg = <0x60000 0x10000>;
+ label = "dtb";
+ read-only;
+ };
+
+ partition@70000 {
+ reg = <0x70000 0x10000>;
+ label = "uboot_env";
+ };
+ };
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ button@1 {
+ label = "Function Button";
+ linux,code = <132>;
+ gpios = <&gpio1 9 1>;
+ };
+ button@2 {
+ label = "Power-on Switch";
+ linux,code = <116>;
+ gpios = <&gpio1 10 1>;
+ };
+ button@3 {
+ label = "Power-auto Switch";
+ linux,code = <142>;
+ gpios = <&gpio1 11 1>;
+ };
+ };
+
+ gpio_leds {
+ compatible = "gpio-leds";
+
+ led@1 {
+ label = "lschlv2:blue:func";
+ gpios = <&gpio1 4 1>;
+ };
+
+ led@2 {
+ label = "lschlv2:red:alarm";
+ gpios = <&gpio1 5 1>;
+ };
+
+ led@3 {
+ label = "lschlv2:amber:info";
+ gpios = <&gpio1 6 1>;
+ };
+
+ led@4 {
+ label = "lschlv2:blue:power";
+ gpios = <&gpio1 7 1>;
+ linux,default-trigger = "default-on";
+ };
+
+ led@5 {
+ label = "lschlv2:red:func";
+ gpios = <&gpio1 16 1>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/kirkwood-ts219-6281.dts b/arch/arm/boot/dts/kirkwood-ts219-6281.dts
new file mode 100644
index 0000000..ccbf327
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ts219-6281.dts
@@ -0,0 +1,21 @@
+/dts-v1/;
+
+/include/ "kirkwood-ts219.dtsi"
+
+/ {
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ button@1 {
+ label = "USB Copy";
+ linux,code = <133>;
+ gpios = <&gpio0 15 1>;
+ };
+ button@2 {
+ label = "Reset";
+ linux,code = <0x198>;
+ gpios = <&gpio0 16 1>;
+ };
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/kirkwood-ts219-6282.dts b/arch/arm/boot/dts/kirkwood-ts219-6282.dts
new file mode 100644
index 0000000..fbe9932
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ts219-6282.dts
@@ -0,0 +1,21 @@
+/dts-v1/;
+
+/include/ "kirkwood-ts219.dtsi"
+
+/ {
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ button@1 {
+ label = "USB Copy";
+ linux,code = <133>;
+ gpios = <&gpio1 11 1>;
+ };
+ button@2 {
+ label = "Reset";
+ linux,code = <0x198>;
+ gpios = <&gpio1 5 1>;
+ };
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi
new file mode 100644
index 0000000..64ea27c
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi
@@ -0,0 +1,78 @@
+/include/ "kirkwood.dtsi"
+
+/ {
+ model = "QNAP TS219 family";
+ compatible = "qnap,ts219", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x20000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ ocp@f1000000 {
+ i2c@11000 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ s35390a: s35390a@30 {
+ compatible = "s35390a";
+ reg = <0x30>;
+ };
+ };
+ serial@12000 {
+ clock-frequency = <200000000>;
+ status = "okay";
+ };
+ serial@12100 {
+ clock-frequency = <200000000>;
+ status = "okay";
+ };
+ spi@10600 {
+ status = "okay";
+
+ m25p128@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "m25p128";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ mode = <0>;
+
+ partition@0000000 {
+ reg = <0x00000000 0x00080000>;
+ label = "U-Boot";
+ };
+
+ partition@00200000 {
+ reg = <0x00200000 0x00200000>;
+ label = "Kernel";
+ };
+
+ partition@00400000 {
+ reg = <0x00400000 0x00900000>;
+ label = "RootFS1";
+ };
+ partition@00d00000 {
+ reg = <0x00d00000 0x00300000>;
+ label = "RootFS2";
+ };
+ partition@00040000 {
+ reg = <0x00080000 0x00040000>;
+ label = "U-Boot Config";
+ };
+ partition@000c0000 {
+ reg = <0x000c0000 0x00140000>;
+ label = "NAS Config";
+ };
+ };
+ };
+ sata@80000 {
+ status = "okay";
+ nr-ports = <2>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
index f95dbc1..cef9616 100644
--- a/arch/arm/boot/dts/kirkwood.dtsi
+++ b/arch/arm/boot/dts/kirkwood.dtsi
@@ -2,6 +2,15 @@
/ {
compatible = "marvell,kirkwood";
+ interrupt-parent = <&intc>;
+
+ intc: interrupt-controller {
+ compatible = "marvell,orion-intc", "marvell,intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0xf1020204 0x04>,
+ <0xf1020214 0x04>;
+ };
ocp@f1000000 {
compatible = "simple-bus";
@@ -9,6 +18,24 @@
#address-cells = <1>;
#size-cells = <1>;
+ gpio0: gpio@10100 {
+ compatible = "marvell,orion-gpio";
+ #gpio-cells = <2>;
+ gpio-controller;
+ reg = <0x10100 0x40>;
+ ngpio = <32>;
+ interrupts = <35>, <36>, <37>, <38>;
+ };
+
+ gpio1: gpio@10140 {
+ compatible = "marvell,orion-gpio";
+ #gpio-cells = <2>;
+ gpio-controller;
+ reg = <0x10140 0x40>;
+ ngpio = <18>;
+ interrupts = <39>, <40>, <41>;
+ };
+
serial@12000 {
compatible = "ns16550a";
reg = <0x12000 0x100>;
@@ -33,6 +60,29 @@
interrupts = <53>;
};
+ spi@10600 {
+ compatible = "marvell,orion-spi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ interrupts = <23>;
+ reg = <0x10600 0x28>;
+ status = "disabled";
+ };
+
+ wdt@20300 {
+ compatible = "marvell,orion-wdt";
+ reg = <0x20300 0x28>;
+ status = "okay";
+ };
+
+ sata@80000 {
+ compatible = "marvell,orion-sata";
+ reg = <0x80000 0x5000>;
+ interrupts = <21>;
+ status = "disabled";
+ };
+
nand@3000000 {
#address-cells = <1>;
#size-cells = <1>;
@@ -45,5 +95,15 @@
/* set partition map and/or chip-delay in board dts */
status = "disabled";
};
+
+ i2c@11000 {
+ compatible = "marvell,mv64xxx-i2c";
+ reg = <0x11000 0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <29>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
};
};
diff --git a/arch/arm/mach-dove/irq.c b/arch/arm/mach-dove/irq.c
index f07fd16..9bc97a5 100644
--- a/arch/arm/mach-dove/irq.c
+++ b/arch/arm/mach-dove/irq.c
@@ -20,22 +20,6 @@
#include <mach/bridge-regs.h>
#include "common.h"
-static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
- int irqoff;
- BUG_ON(irq < IRQ_DOVE_GPIO_0_7 || irq > IRQ_DOVE_HIGH_GPIO);
-
- irqoff = irq <= IRQ_DOVE_GPIO_16_23 ? irq - IRQ_DOVE_GPIO_0_7 :
- 3 + irq - IRQ_DOVE_GPIO_24_31;
-
- orion_gpio_irq_handler(irqoff << 3);
- if (irq == IRQ_DOVE_HIGH_GPIO) {
- orion_gpio_irq_handler(40);
- orion_gpio_irq_handler(48);
- orion_gpio_irq_handler(56);
- }
-}
-
static void pmu_irq_mask(struct irq_data *d)
{
int pin = irq_to_pmu(d->irq);
@@ -90,6 +74,27 @@
}
}
+static int __initdata gpio0_irqs[4] = {
+ IRQ_DOVE_GPIO_0_7,
+ IRQ_DOVE_GPIO_8_15,
+ IRQ_DOVE_GPIO_16_23,
+ IRQ_DOVE_GPIO_24_31,
+};
+
+static int __initdata gpio1_irqs[4] = {
+ IRQ_DOVE_HIGH_GPIO,
+ 0,
+ 0,
+ 0,
+};
+
+static int __initdata gpio2_irqs[4] = {
+ 0,
+ 0,
+ 0,
+ 0,
+};
+
void __init dove_init_irq(void)
{
int i;
@@ -100,19 +105,14 @@
/*
* Initialize gpiolib for GPIOs 0-71.
*/
- orion_gpio_init(0, 32, DOVE_GPIO_LO_VIRT_BASE, 0,
- IRQ_DOVE_GPIO_START);
- irq_set_chained_handler(IRQ_DOVE_GPIO_0_7, gpio_irq_handler);
- irq_set_chained_handler(IRQ_DOVE_GPIO_8_15, gpio_irq_handler);
- irq_set_chained_handler(IRQ_DOVE_GPIO_16_23, gpio_irq_handler);
- irq_set_chained_handler(IRQ_DOVE_GPIO_24_31, gpio_irq_handler);
+ orion_gpio_init(NULL, 0, 32, (void __iomem *)DOVE_GPIO_LO_VIRT_BASE, 0,
+ IRQ_DOVE_GPIO_START, gpio0_irqs);
- orion_gpio_init(32, 32, DOVE_GPIO_HI_VIRT_BASE, 0,
- IRQ_DOVE_GPIO_START + 32);
- irq_set_chained_handler(IRQ_DOVE_HIGH_GPIO, gpio_irq_handler);
+ orion_gpio_init(NULL, 32, 32, (void __iomem *)DOVE_GPIO_HI_VIRT_BASE, 0,
+ IRQ_DOVE_GPIO_START + 32, gpio1_irqs);
- orion_gpio_init(64, 8, DOVE_GPIO2_VIRT_BASE, 0,
- IRQ_DOVE_GPIO_START + 64);
+ orion_gpio_init(NULL, 64, 8, (void __iomem *)DOVE_GPIO2_VIRT_BASE, 0,
+ IRQ_DOVE_GPIO_START + 64, gpio2_irqs);
/*
* Mask and clear PMU interrupts
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index 199764f..ca5c15a 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -80,6 +80,35 @@
RaidSonic IB-NAS6210 & IB-NAS6220 devices, using
Flattened Device Tree.
+config MACH_TS219_DT
+ bool "Device Tree for QNAP TS-11X, TS-21X NAS"
+ select ARCH_KIRKWOOD_DT
+ select ARM_APPENDED_DTB
+ select ARM_ATAG_DTB_COMPAT
+ help
+ Say 'Y' here if you want your kernel to support the QNAP
+ TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and
+ TS-219P+ Turbo NAS devices using Fattened Device Tree.
+ There are two different Device Tree descriptions, depending
+ on if the device is based on an if the board uses the MV6281
+ or MV6282. If you have the wrong one, the buttons will not
+ work.
+
+config MACH_GOFLEXNET_DT
+ bool "Seagate GoFlex Net (Flattened Device Tree)"
+ select ARCH_KIRKWOOD_DT
+ help
+ Say 'Y' here if you want your kernel to support the
+ Seagate GoFlex Net (Flattened Device Tree).
+
+config MACH_LSXL_DT
+ bool "Buffalo Linkstation LS-XHL, LS-CHLv2 (Flattened Device Tree)"
+ select ARCH_KIRKWOOD_DT
+ help
+ Say 'Y' here if you want your kernel to support the
+ Buffalo Linkstation LS-XHL & LS-CHLv2 devices, using
+ Flattened Device Tree.
+
config MACH_TS219
bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS"
help
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index d2b0590..055c85a 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -25,3 +25,6 @@
obj-$(CONFIG_MACH_ICONNECT_DT) += board-iconnect.o
obj-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += board-dnskw.o
obj-$(CONFIG_MACH_IB62X0_DT) += board-ib62x0.o
+obj-$(CONFIG_MACH_TS219_DT) += board-ts219.o tsx1x-common.o
+obj-$(CONFIG_MACH_GOFLEXNET_DT) += board-goflexnet.o
+obj-$(CONFIG_MACH_LSXL_DT) += board-lsxl.o
diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot
index 02edbdf..2a576ab 100644
--- a/arch/arm/mach-kirkwood/Makefile.boot
+++ b/arch/arm/mach-kirkwood/Makefile.boot
@@ -7,3 +7,7 @@
dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns325.dtb
dtb-$(CONFIG_MACH_ICONNECT_DT) += kirkwood-iconnect.dtb
dtb-$(CONFIG_MACH_IB62X0_DT) += kirkwood-ib62x0.dtb
+dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-qnap-ts219.dtb
+dtb-$(CONFIG_MACH_GOFLEXNET_DT) += kirkwood-goflexnet.dtb
+dbt-$(CONFIG_MACH_LSXL_DT) += kirkwood-lschlv2.dtb
+dbt-$(CONFIG_MACH_LSXL_DT) += kirkwood-lsxhl.dtb
diff --git a/arch/arm/mach-kirkwood/board-dnskw.c b/arch/arm/mach-kirkwood/board-dnskw.c
index 58c2d68..4ab3506 100644
--- a/arch/arm/mach-kirkwood/board-dnskw.c
+++ b/arch/arm/mach-kirkwood/board-dnskw.c
@@ -14,13 +14,11 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/i2c.h>
#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
#include <linux/of.h>
#include <linux/gpio.h>
#include <linux/input.h>
-#include <linux/gpio_keys.h>
#include <linux/gpio-fan.h>
#include <linux/leds.h>
#include <asm/mach-types.h>
@@ -35,10 +33,6 @@
.phy_addr = MV643XX_ETH_PHY_ADDR(8),
};
-static struct mv_sata_platform_data dnskw_sata_data = {
- .n_ports = 2,
-};
-
static unsigned int dnskw_mpp_config[] __initdata = {
MPP13_UART1_TXD, /* Custom ... */
MPP14_UART1_RXD, /* ... Controller (DNS-320 only) */
@@ -73,132 +67,6 @@
0
};
-static struct gpio_led dns325_led_pins[] = {
- {
- .name = "dns325:white:power",
- .gpio = 26,
- .active_low = 1,
- .default_trigger = "default-on",
- },
- {
- .name = "dns325:white:usb",
- .gpio = 43,
- .active_low = 1,
- },
- {
- .name = "dns325:red:l_hdd",
- .gpio = 28,
- .active_low = 1,
- },
- {
- .name = "dns325:red:r_hdd",
- .gpio = 27,
- .active_low = 1,
- },
- {
- .name = "dns325:red:usb",
- .gpio = 29,
- .active_low = 1,
- },
-};
-
-static struct gpio_led_platform_data dns325_led_data = {
- .num_leds = ARRAY_SIZE(dns325_led_pins),
- .leds = dns325_led_pins,
-};
-
-static struct platform_device dns325_led_device = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &dns325_led_data,
- },
-};
-
-static struct gpio_led dns320_led_pins[] = {
- {
- .name = "dns320:blue:power",
- .gpio = 26,
- .active_low = 1,
- .default_trigger = "default-on",
- },
- {
- .name = "dns320:blue:usb",
- .gpio = 43,
- .active_low = 1,
- },
- {
- .name = "dns320:orange:l_hdd",
- .gpio = 28,
- .active_low = 1,
- },
- {
- .name = "dns320:orange:r_hdd",
- .gpio = 27,
- .active_low = 1,
- },
- {
- .name = "dns320:orange:usb",
- .gpio = 35,
- .active_low = 1,
- },
-};
-
-static struct gpio_led_platform_data dns320_led_data = {
- .num_leds = ARRAY_SIZE(dns320_led_pins),
- .leds = dns320_led_pins,
-};
-
-static struct platform_device dns320_led_device = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &dns320_led_data,
- },
-};
-
-static struct i2c_board_info dns325_i2c_board_info[] __initdata = {
- {
- I2C_BOARD_INFO("lm75", 0x48),
- },
- /* Something at 0x0c also */
-};
-
-static struct gpio_keys_button dnskw_button_pins[] = {
- {
- .code = KEY_POWER,
- .gpio = 34,
- .desc = "Power button",
- .active_low = 1,
- },
- {
- .code = KEY_EJECTCD,
- .gpio = 47,
- .desc = "USB unmount button",
- .active_low = 1,
- },
- {
- .code = KEY_RESTART,
- .gpio = 48,
- .desc = "Reset button",
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_platform_data dnskw_button_data = {
- .buttons = dnskw_button_pins,
- .nbuttons = ARRAY_SIZE(dnskw_button_pins),
-};
-
-static struct platform_device dnskw_button_device = {
- .name = "gpio-keys",
- .id = -1,
- .num_resources = 0,
- .dev = {
- .platform_data = &dnskw_button_data,
- }
-};
-
/* Fan: ADDA AD045HB-G73 40mm 6000rpm@5v */
static struct gpio_fan_speed dnskw_fan_speed[] = {
{ 0, 0 },
@@ -245,20 +113,9 @@
kirkwood_ehci_init();
kirkwood_ge00_init(&dnskw_ge00_data);
- kirkwood_sata_init(&dnskw_sata_data);
- kirkwood_i2c_init();
- platform_device_register(&dnskw_button_device);
platform_device_register(&dnskw_fan_device);
- if (of_machine_is_compatible("dlink,dns-325")) {
- i2c_register_board_info(0, dns325_i2c_board_info,
- ARRAY_SIZE(dns325_i2c_board_info));
- platform_device_register(&dns325_led_device);
-
- } else if (of_machine_is_compatible("dlink,dns-320"))
- platform_device_register(&dns320_led_device);
-
/* Register power-off GPIO. */
if (gpio_request(36, "dnskw:power:off") == 0
&& gpio_direction_output(36, 0) == 0)
diff --git a/arch/arm/mach-kirkwood/board-dreamplug.c b/arch/arm/mach-kirkwood/board-dreamplug.c
index 55e357a..aeb234d 100644
--- a/arch/arm/mach-kirkwood/board-dreamplug.c
+++ b/arch/arm/mach-kirkwood/board-dreamplug.c
@@ -14,7 +14,6 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/mtd/partitions.h>
#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
#include <linux/of.h>
@@ -23,7 +22,6 @@
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/gpio.h>
-#include <linux/leds.h>
#include <linux/mtd/physmap.h>
#include <linux/spi/flash.h>
#include <linux/spi/spi.h>
@@ -36,42 +34,6 @@
#include "common.h"
#include "mpp.h"
-struct mtd_partition dreamplug_partitions[] = {
- {
- .name = "u-boot",
- .size = SZ_512K,
- .offset = 0,
- },
- {
- .name = "u-boot env",
- .size = SZ_64K,
- .offset = SZ_512K + SZ_512K,
- },
- {
- .name = "dtb",
- .size = SZ_64K,
- .offset = SZ_512K + SZ_512K + SZ_512K,
- },
-};
-
-static const struct flash_platform_data dreamplug_spi_slave_data = {
- .type = "mx25l1606e",
- .name = "spi_flash",
- .parts = dreamplug_partitions,
- .nr_parts = ARRAY_SIZE(dreamplug_partitions),
-};
-
-static struct spi_board_info __initdata dreamplug_spi_slave_info[] = {
- {
- .modalias = "m25p80",
- .platform_data = &dreamplug_spi_slave_data,
- .irq = -1,
- .max_speed_hz = 50000000,
- .bus_num = 0,
- .chip_select = 0,
- },
-};
-
static struct mv643xx_eth_platform_data dreamplug_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(0),
};
@@ -80,45 +42,10 @@
.phy_addr = MV643XX_ETH_PHY_ADDR(1),
};
-static struct mv_sata_platform_data dreamplug_sata_data = {
- .n_ports = 1,
-};
-
static struct mvsdio_platform_data dreamplug_mvsdio_data = {
/* unfortunately the CD signal has not been connected */
};
-static struct gpio_led dreamplug_led_pins[] = {
- {
- .name = "dreamplug:blue:bluetooth",
- .gpio = 47,
- .active_low = 1,
- },
- {
- .name = "dreamplug:green:wifi",
- .gpio = 48,
- .active_low = 1,
- },
- {
- .name = "dreamplug:green:wifi_ap",
- .gpio = 49,
- .active_low = 1,
- },
-};
-
-static struct gpio_led_platform_data dreamplug_led_data = {
- .leds = dreamplug_led_pins,
- .num_leds = ARRAY_SIZE(dreamplug_led_pins),
-};
-
-static struct platform_device dreamplug_leds = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &dreamplug_led_data,
- }
-};
-
static unsigned int dreamplug_mpp_config[] __initdata = {
MPP0_SPI_SCn,
MPP1_SPI_MOSI,
@@ -137,15 +64,8 @@
*/
kirkwood_mpp_conf(dreamplug_mpp_config);
- spi_register_board_info(dreamplug_spi_slave_info,
- ARRAY_SIZE(dreamplug_spi_slave_info));
- kirkwood_spi_init();
-
kirkwood_ehci_init();
kirkwood_ge00_init(&dreamplug_ge00_data);
kirkwood_ge01_init(&dreamplug_ge01_data);
- kirkwood_sata_init(&dreamplug_sata_data);
kirkwood_sdio_init(&dreamplug_mvsdio_data);
-
- platform_device_register(&dreamplug_leds);
}
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
index edc3f8a..e4eb450 100644
--- a/arch/arm/mach-kirkwood/board-dt.c
+++ b/arch/arm/mach-kirkwood/board-dt.c
@@ -18,6 +18,7 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/bridge-regs.h>
+#include <plat/irq.h>
#include "common.h"
static struct of_device_id kirkwood_dt_match_table[] __initdata = {
@@ -25,6 +26,16 @@
{ }
};
+struct of_dev_auxdata kirkwood_auxdata_lookup[] __initdata = {
+ OF_DEV_AUXDATA("marvell,orion-spi", 0xf1010600, "orion_spi.0", NULL),
+ OF_DEV_AUXDATA("marvell,mv64xxx-i2c", 0xf1011000, "mv64xxx_i2c.0",
+ NULL),
+ OF_DEV_AUXDATA("marvell,orion-wdt", 0xf1020300, "orion_wdt", NULL),
+ OF_DEV_AUXDATA("marvell,orion-sata", 0xf1080000, "sata_mv.0", NULL),
+ OF_DEV_AUXDATA("marvell,orion-nand", 0xf4000000, "orion_nand", NULL),
+ {},
+};
+
static void __init kirkwood_dt_init(void)
{
pr_info("Kirkwood: %s, TCLK=%d.\n", kirkwood_id(), kirkwood_tclk);
@@ -47,7 +58,6 @@
kirkwood_clk_init();
/* internal devices that every board has */
- kirkwood_wdt_init();
kirkwood_xor0_init();
kirkwood_xor1_init();
kirkwood_crypto_init();
@@ -68,7 +78,17 @@
if (of_machine_is_compatible("raidsonic,ib-nas62x0"))
ib62x0_init();
- of_platform_populate(NULL, kirkwood_dt_match_table, NULL, NULL);
+ if (of_machine_is_compatible("qnap,ts219"))
+ qnap_dt_ts219_init();
+
+ if (of_machine_is_compatible("seagate,goflexnet"))
+ goflexnet_init();
+
+ if (of_machine_is_compatible("buffalo,lsxl"))
+ lsxl_init();
+
+ of_platform_populate(NULL, kirkwood_dt_match_table,
+ kirkwood_auxdata_lookup, NULL);
}
static const char *kirkwood_dt_board_compat[] = {
@@ -77,6 +97,9 @@
"dlink,dns-325",
"iom,iconnect",
"raidsonic,ib-nas62x0",
+ "qnap,ts219",
+ "seagate,goflexnet",
+ "buffalo,lsxl",
NULL
};
@@ -84,7 +107,7 @@
/* Maintainer: Jason Cooper <jason@lakedaemon.net> */
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
- .init_irq = kirkwood_init_irq,
+ .init_irq = orion_dt_init_irq,
.timer = &kirkwood_timer,
.init_machine = kirkwood_dt_init,
.restart = kirkwood_restart,
diff --git a/arch/arm/mach-kirkwood/board-goflexnet.c b/arch/arm/mach-kirkwood/board-goflexnet.c
new file mode 100644
index 0000000..413e2c8
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-goflexnet.c
@@ -0,0 +1,71 @@
+/*
+ * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net>
+ *
+ * arch/arm/mach-kirkwood/board-goflexnet.c
+ *
+ * Seagate GoFlext Net Board Init for drivers not converted to
+ * flattened device tree yet.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Copied and modified for Seagate GoFlex Net support by
+ * Joshua Coombs <josh.coombs@gmail.com> based on ArchLinux ARM's
+ * GoFlex kernel patches.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_fdt.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <mach/kirkwood.h>
+#include <mach/bridge-regs.h>
+#include <plat/mvsdio.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mv643xx_eth_platform_data goflexnet_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(0),
+};
+
+static unsigned int goflexnet_mpp_config[] __initdata = {
+ MPP29_GPIO, /* USB Power Enable */
+ MPP47_GPIO, /* LED Orange */
+ MPP46_GPIO, /* LED Green */
+ MPP45_GPIO, /* LED Left Capacity 3 */
+ MPP44_GPIO, /* LED Left Capacity 2 */
+ MPP43_GPIO, /* LED Left Capacity 1 */
+ MPP42_GPIO, /* LED Left Capacity 0 */
+ MPP41_GPIO, /* LED Right Capacity 3 */
+ MPP40_GPIO, /* LED Right Capacity 2 */
+ MPP39_GPIO, /* LED Right Capacity 1 */
+ MPP38_GPIO, /* LED Right Capacity 0 */
+ 0
+};
+
+void __init goflexnet_init(void)
+{
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ kirkwood_mpp_conf(goflexnet_mpp_config);
+
+ if (gpio_request(29, "USB Power Enable") != 0 ||
+ gpio_direction_output(29, 1) != 0)
+ pr_err("can't setup GPIO 29 (USB Power Enable)\n");
+ kirkwood_ehci_init();
+
+ kirkwood_ge00_init(&goflexnet_ge00_data);
+}
diff --git a/arch/arm/mach-kirkwood/board-ib62x0.c b/arch/arm/mach-kirkwood/board-ib62x0.c
index eddf1df..cfc47f8 100644
--- a/arch/arm/mach-kirkwood/board-ib62x0.c
+++ b/arch/arm/mach-kirkwood/board-ib62x0.c
@@ -18,9 +18,7 @@
#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
#include <linux/input.h>
-#include <linux/leds.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
@@ -33,10 +31,6 @@
.phy_addr = MV643XX_ETH_PHY_ADDR(8),
};
-static struct mv_sata_platform_data ib62x0_sata_data = {
- .n_ports = 2,
-};
-
static unsigned int ib62x0_mpp_config[] __initdata = {
MPP0_NF_IO2,
MPP1_NF_IO3,
@@ -55,69 +49,6 @@
0
};
-static struct gpio_led ib62x0_led_pins[] = {
- {
- .name = "ib62x0:green:os",
- .default_trigger = "default-on",
- .gpio = 25,
- .active_low = 0,
- },
- {
- .name = "ib62x0:red:os",
- .default_trigger = "none",
- .gpio = 22,
- .active_low = 0,
- },
- {
- .name = "ib62x0:red:usb_copy",
- .default_trigger = "none",
- .gpio = 27,
- .active_low = 0,
- },
-};
-
-static struct gpio_led_platform_data ib62x0_led_data = {
- .leds = ib62x0_led_pins,
- .num_leds = ARRAY_SIZE(ib62x0_led_pins),
-};
-
-static struct platform_device ib62x0_led_device = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &ib62x0_led_data,
- }
-};
-
-static struct gpio_keys_button ib62x0_button_pins[] = {
- {
- .code = KEY_COPY,
- .gpio = 29,
- .desc = "USB Copy",
- .active_low = 1,
- },
- {
- .code = KEY_RESTART,
- .gpio = 28,
- .desc = "Reset",
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_platform_data ib62x0_button_data = {
- .buttons = ib62x0_button_pins,
- .nbuttons = ARRAY_SIZE(ib62x0_button_pins),
-};
-
-static struct platform_device ib62x0_button_device = {
- .name = "gpio-keys",
- .id = -1,
- .num_resources = 0,
- .dev = {
- .platform_data = &ib62x0_button_data,
- }
-};
-
static void ib62x0_power_off(void)
{
gpio_set_value(IB62X0_GPIO_POWER_OFF, 1);
@@ -132,9 +63,6 @@
kirkwood_ehci_init();
kirkwood_ge00_init(&ib62x0_ge00_data);
- kirkwood_sata_init(&ib62x0_sata_data);
- platform_device_register(&ib62x0_led_device);
- platform_device_register(&ib62x0_button_device);
if (gpio_request(IB62X0_GPIO_POWER_OFF, "ib62x0:power:off") == 0 &&
gpio_direction_output(IB62X0_GPIO_POWER_OFF, 0) == 0)
pm_power_off = ib62x0_power_off;
diff --git a/arch/arm/mach-kirkwood/board-iconnect.c b/arch/arm/mach-kirkwood/board-iconnect.c
index b0d3cc4..d7a9198 100644
--- a/arch/arm/mach-kirkwood/board-iconnect.c
+++ b/arch/arm/mach-kirkwood/board-iconnect.c
@@ -19,8 +19,6 @@
#include <linux/mtd/partitions.h>
#include <linux/mv643xx_eth.h>
#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/i2c.h>
#include <linux/input.h>
#include <linux/gpio_keys.h>
#include <asm/mach/arch.h>
@@ -32,50 +30,6 @@
.phy_addr = MV643XX_ETH_PHY_ADDR(11),
};
-static struct gpio_led iconnect_led_pins[] = {
- {
- .name = "led_level",
- .gpio = 41,
- .default_trigger = "default-on",
- }, {
- .name = "power:blue",
- .gpio = 42,
- .default_trigger = "timer",
- }, {
- .name = "power:red",
- .gpio = 43,
- }, {
- .name = "usb1:blue",
- .gpio = 44,
- }, {
- .name = "usb2:blue",
- .gpio = 45,
- }, {
- .name = "usb3:blue",
- .gpio = 46,
- }, {
- .name = "usb4:blue",
- .gpio = 47,
- }, {
- .name = "otb:blue",
- .gpio = 48,
- },
-};
-
-static struct gpio_led_platform_data iconnect_led_data = {
- .leds = iconnect_led_pins,
- .num_leds = ARRAY_SIZE(iconnect_led_pins),
- .gpio_blink_set = orion_gpio_led_blink_set,
-};
-
-static struct platform_device iconnect_leds = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &iconnect_led_data,
- }
-};
-
static unsigned int iconnect_mpp_config[] __initdata = {
MPP12_GPIO,
MPP35_GPIO,
@@ -90,12 +44,6 @@
0
};
-static struct i2c_board_info __initdata iconnect_board_info[] = {
- {
- I2C_BOARD_INFO("lm63", 0x4c),
- },
-};
-
static struct mtd_partition iconnect_nand_parts[] = {
{
.name = "flash",
@@ -142,15 +90,11 @@
{
kirkwood_mpp_conf(iconnect_mpp_config);
kirkwood_nand_init(ARRAY_AND_SIZE(iconnect_nand_parts), 25);
- kirkwood_i2c_init();
- i2c_register_board_info(0, iconnect_board_info,
- ARRAY_SIZE(iconnect_board_info));
kirkwood_ehci_init();
kirkwood_ge00_init(&iconnect_ge00_data);
platform_device_register(&iconnect_button_device);
- platform_device_register(&iconnect_leds);
}
static int __init iconnect_pci_init(void)
diff --git a/arch/arm/mach-kirkwood/board-lsxl.c b/arch/arm/mach-kirkwood/board-lsxl.c
new file mode 100644
index 0000000..83d8975
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-lsxl.c
@@ -0,0 +1,135 @@
+/*
+ * Copyright 2012 (C), Michael Walle <michael@walle.cc>
+ *
+ * arch/arm/mach-kirkwood/board-lsxl.c
+ *
+ * Buffalo Linkstation LS-XHL and LS-CHLv2 init for drivers not
+ * converted to flattened device tree yet.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+#include <linux/ata_platform.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
+#include <linux/gpio-fan.h>
+#include <linux/input.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mv643xx_eth_platform_data lsxl_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(0),
+};
+
+static struct mv643xx_eth_platform_data lsxl_ge01_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(8),
+};
+
+static unsigned int lsxl_mpp_config[] __initdata = {
+ MPP10_GPO, /* HDD Power Enable */
+ MPP11_GPIO, /* USB Vbus Enable */
+ MPP18_GPO, /* FAN High Enable# */
+ MPP19_GPO, /* FAN Low Enable# */
+ MPP36_GPIO, /* Function Blue LED */
+ MPP37_GPIO, /* Alarm LED */
+ MPP38_GPIO, /* Info LED */
+ MPP39_GPIO, /* Power LED */
+ MPP40_GPIO, /* Fan Lock */
+ MPP41_GPIO, /* Function Button */
+ MPP42_GPIO, /* Power Switch */
+ MPP43_GPIO, /* Power Auto Switch */
+ MPP48_GPIO, /* Function Red LED */
+ 0
+};
+
+#define LSXL_GPIO_FAN_HIGH 18
+#define LSXL_GPIO_FAN_LOW 19
+#define LSXL_GPIO_FAN_LOCK 40
+
+static struct gpio_fan_alarm lsxl_alarm = {
+ .gpio = LSXL_GPIO_FAN_LOCK,
+};
+
+static struct gpio_fan_speed lsxl_speeds[] = {
+ {
+ .rpm = 0,
+ .ctrl_val = 3,
+ }, {
+ .rpm = 1500,
+ .ctrl_val = 1,
+ }, {
+ .rpm = 3250,
+ .ctrl_val = 2,
+ }, {
+ .rpm = 5000,
+ .ctrl_val = 0,
+ }
+};
+
+static int lsxl_gpio_list[] = {
+ LSXL_GPIO_FAN_HIGH, LSXL_GPIO_FAN_LOW,
+};
+
+static struct gpio_fan_platform_data lsxl_fan_data = {
+ .num_ctrl = ARRAY_SIZE(lsxl_gpio_list),
+ .ctrl = lsxl_gpio_list,
+ .alarm = &lsxl_alarm,
+ .num_speed = ARRAY_SIZE(lsxl_speeds),
+ .speed = lsxl_speeds,
+};
+
+static struct platform_device lsxl_fan_device = {
+ .name = "gpio-fan",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &lsxl_fan_data,
+ },
+};
+
+/*
+ * On the LS-XHL/LS-CHLv2, the shutdown process is following:
+ * - Userland monitors key events until the power switch goes to off position
+ * - The board reboots
+ * - U-boot starts and goes into an idle mode waiting for the user
+ * to move the switch to ON position
+ *
+ */
+static void lsxl_power_off(void)
+{
+ kirkwood_restart('h', NULL);
+}
+
+#define LSXL_GPIO_HDD_POWER 10
+#define LSXL_GPIO_USB_POWER 11
+
+void __init lsxl_init(void)
+{
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ kirkwood_mpp_conf(lsxl_mpp_config);
+
+ /* usb and sata power on */
+ gpio_set_value(LSXL_GPIO_USB_POWER, 1);
+ gpio_set_value(LSXL_GPIO_HDD_POWER, 1);
+
+ kirkwood_ehci_init();
+ kirkwood_ge00_init(&lsxl_ge00_data);
+ kirkwood_ge01_init(&lsxl_ge01_data);
+ platform_device_register(&lsxl_fan_device);
+
+ /* register power-off method */
+ pm_power_off = lsxl_power_off;
+}
diff --git a/arch/arm/mach-kirkwood/board-ts219.c b/arch/arm/mach-kirkwood/board-ts219.c
new file mode 100644
index 0000000..1750e68
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-ts219.c
@@ -0,0 +1,82 @@
+/*
+ *
+ * QNAP TS-11x/TS-21x Turbo NAS Board Setup via DT
+ *
+ * Copyright (C) 2012 Andrew Lunn <andrew@lunn.ch>
+ *
+ * Based on the board file ts219-setup.c:
+ *
+ * Copyright (C) 2009 Martin Michlmayr <tbm@cyrius.com>
+ * Copyright (C) 2008 Byron Bradley <byron.bbradley@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ata_platform.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+#include "tsx1x-common.h"
+
+static struct mv643xx_eth_platform_data qnap_ts219_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(8),
+};
+
+static unsigned int qnap_ts219_mpp_config[] __initdata = {
+ MPP0_SPI_SCn,
+ MPP1_SPI_MOSI,
+ MPP2_SPI_SCK,
+ MPP3_SPI_MISO,
+ MPP4_SATA1_ACTn,
+ MPP5_SATA0_ACTn,
+ MPP8_TW0_SDA,
+ MPP9_TW0_SCK,
+ MPP10_UART0_TXD,
+ MPP11_UART0_RXD,
+ MPP13_UART1_TXD, /* PIC controller */
+ MPP14_UART1_RXD, /* PIC controller */
+ MPP15_GPIO, /* USB Copy button (on devices with 88F6281) */
+ MPP16_GPIO, /* Reset button (on devices with 88F6281) */
+ MPP36_GPIO, /* RAM: 0: 256 MB, 1: 512 MB */
+ MPP37_GPIO, /* Reset button (on devices with 88F6282) */
+ MPP43_GPIO, /* USB Copy button (on devices with 88F6282) */
+ MPP44_GPIO, /* Board ID: 0: TS-11x, 1: TS-21x */
+ 0
+};
+
+void __init qnap_dt_ts219_init(void)
+{
+ u32 dev, rev;
+
+ kirkwood_mpp_conf(qnap_ts219_mpp_config);
+
+ kirkwood_pcie_id(&dev, &rev);
+ if (dev == MV88F6282_DEV_ID)
+ qnap_ts219_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
+
+ kirkwood_ge00_init(&qnap_ts219_ge00_data);
+ kirkwood_ehci_init();
+
+ pm_power_off = qnap_tsx1x_power_off;
+}
+
+/* FIXME: Will not work with DT. Maybe use MPP40_GPIO? */
+static int __init ts219_pci_init(void)
+{
+ if (machine_is_ts219())
+ kirkwood_pcie_init(KW_PCIE0);
+
+ return 0;
+}
+subsys_initcall(ts219_pci_init);
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index c920153..c4b64ad 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -17,6 +17,7 @@
#include <linux/dma-mapping.h>
#include <linux/clk-provider.h>
#include <linux/spinlock.h>
+#include <linux/mv643xx_i2c.h>
#include <net/dsa.h>
#include <asm/page.h>
#include <asm/timex.h>
@@ -276,6 +277,7 @@
orion_clkdev_add("0", "pcie", pex0);
orion_clkdev_add("1", "pcie", pex1);
orion_clkdev_add(NULL, "kirkwood-i2s", audio);
+ orion_clkdev_add(NULL, MV64XXX_I2C_CTLR_NAME ".0", runit);
/* Marvell says runit is used by SPI, UART, NAND, TWSI, ...,
* so should never be gated.
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index 9248fa2..304dd1a 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -58,6 +58,11 @@
#else
static inline void dreamplug_init(void) {};
#endif
+#ifdef CONFIG_MACH_TS219_DT
+void qnap_dt_ts219_init(void);
+#else
+static inline void qnap_dt_ts219_init(void) {};
+#endif
#ifdef CONFIG_MACH_DLINK_KIRKWOOD_DT
void dnskw_init(void);
@@ -77,6 +82,18 @@
static inline void ib62x0_init(void) {};
#endif
+#ifdef CONFIG_MACH_GOFLEXNET_DT
+void goflexnet_init(void);
+#else
+static inline void goflexnet_init(void) {};
+#endif
+
+#ifdef CONFIG_MACH_LSXL_DT
+void lsxl_init(void);
+#else
+static inline void lsxl_init(void) {};
+#endif
+
/* early init functions not converted to fdt yet */
char *kirkwood_id(void);
void kirkwood_l2_init(void);
diff --git a/arch/arm/mach-kirkwood/irq.c b/arch/arm/mach-kirkwood/irq.c
index c4c68e5..720063f 100644
--- a/arch/arm/mach-kirkwood/irq.c
+++ b/arch/arm/mach-kirkwood/irq.c
@@ -9,20 +9,23 @@
*/
#include <linux/gpio.h>
#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/irq.h>
-#include <linux/io.h>
#include <mach/bridge-regs.h>
#include <plat/irq.h>
-#include "common.h"
-static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
- BUG_ON(irq < IRQ_KIRKWOOD_GPIO_LOW_0_7);
- BUG_ON(irq > IRQ_KIRKWOOD_GPIO_HIGH_16_23);
+static int __initdata gpio0_irqs[4] = {
+ IRQ_KIRKWOOD_GPIO_LOW_0_7,
+ IRQ_KIRKWOOD_GPIO_LOW_8_15,
+ IRQ_KIRKWOOD_GPIO_LOW_16_23,
+ IRQ_KIRKWOOD_GPIO_LOW_24_31,
+};
- orion_gpio_irq_handler((irq - IRQ_KIRKWOOD_GPIO_LOW_0_7) << 3);
-}
+static int __initdata gpio1_irqs[4] = {
+ IRQ_KIRKWOOD_GPIO_HIGH_0_7,
+ IRQ_KIRKWOOD_GPIO_HIGH_8_15,
+ IRQ_KIRKWOOD_GPIO_HIGH_16_23,
+ 0,
+};
void __init kirkwood_init_irq(void)
{
@@ -32,17 +35,8 @@
/*
* Initialize gpiolib for GPIOs 0-49.
*/
- orion_gpio_init(0, 32, GPIO_LOW_VIRT_BASE, 0,
- IRQ_KIRKWOOD_GPIO_START);
- irq_set_chained_handler(IRQ_KIRKWOOD_GPIO_LOW_0_7, gpio_irq_handler);
- irq_set_chained_handler(IRQ_KIRKWOOD_GPIO_LOW_8_15, gpio_irq_handler);
- irq_set_chained_handler(IRQ_KIRKWOOD_GPIO_LOW_16_23, gpio_irq_handler);
- irq_set_chained_handler(IRQ_KIRKWOOD_GPIO_LOW_24_31, gpio_irq_handler);
-
- orion_gpio_init(32, 18, GPIO_HIGH_VIRT_BASE, 0,
- IRQ_KIRKWOOD_GPIO_START + 32);
- irq_set_chained_handler(IRQ_KIRKWOOD_GPIO_HIGH_0_7, gpio_irq_handler);
- irq_set_chained_handler(IRQ_KIRKWOOD_GPIO_HIGH_8_15, gpio_irq_handler);
- irq_set_chained_handler(IRQ_KIRKWOOD_GPIO_HIGH_16_23,
- gpio_irq_handler);
+ orion_gpio_init(NULL, 0, 32, (void __iomem *)GPIO_LOW_VIRT_BASE, 0,
+ IRQ_KIRKWOOD_GPIO_START, gpio0_irqs);
+ orion_gpio_init(NULL, 32, 18, (void __iomem *)GPIO_HIGH_VIRT_BASE, 0,
+ IRQ_KIRKWOOD_GPIO_START + 32, gpio1_irqs);
}
diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c
index f516e74..5c3d61e 100644
--- a/arch/arm/mach-mmp/gplugd.c
+++ b/arch/arm/mach-mmp/gplugd.c
@@ -14,6 +14,7 @@
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
+#include <mach/irqs.h>
#include <mach/pxa168.h>
#include <mach/mfp-pxa168.h>
diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c
index e421b70..eff9a75 100644
--- a/arch/arm/mach-mv78xx0/irq.c
+++ b/arch/arm/mach-mv78xx0/irq.c
@@ -9,19 +9,17 @@
*/
#include <linux/gpio.h>
#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
#include <linux/irq.h>
#include <mach/bridge-regs.h>
#include <plat/irq.h>
#include "common.h"
-static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
- BUG_ON(irq < IRQ_MV78XX0_GPIO_0_7 || irq > IRQ_MV78XX0_GPIO_24_31);
-
- orion_gpio_irq_handler((irq - IRQ_MV78XX0_GPIO_0_7) << 3);
-}
+static int __initdata gpio0_irqs[4] = {
+ IRQ_MV78XX0_GPIO_0_7,
+ IRQ_MV78XX0_GPIO_8_15,
+ IRQ_MV78XX0_GPIO_16_23,
+ IRQ_MV78XX0_GPIO_24_31,
+};
void __init mv78xx0_init_irq(void)
{
@@ -34,11 +32,7 @@
* registers for core #1 are at an offset of 0x18 from those of
* core #0.)
*/
- orion_gpio_init(0, 32, GPIO_VIRT_BASE,
+ orion_gpio_init(NULL, 0, 32, (void __iomem *)GPIO_VIRT_BASE,
mv78xx0_core_index() ? 0x18 : 0,
- IRQ_MV78XX0_GPIO_START);
- irq_set_chained_handler(IRQ_MV78XX0_GPIO_0_7, gpio_irq_handler);
- irq_set_chained_handler(IRQ_MV78XX0_GPIO_8_15, gpio_irq_handler);
- irq_set_chained_handler(IRQ_MV78XX0_GPIO_16_23, gpio_irq_handler);
- irq_set_chained_handler(IRQ_MV78XX0_GPIO_24_31, gpio_irq_handler);
+ IRQ_MV78XX0_GPIO_START, gpio0_irqs);
}
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index dd0fbf7..dd2db02 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -62,6 +62,7 @@
select PM_OPP if PM
select USB_ARCH_HAS_EHCI if USB_SUPPORT
select ARM_CPU_SUSPEND if PM
+ select ARCH_NEEDS_CPU_IDLE_COUPLED
config SOC_OMAP5
bool "TI OMAP5"
diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c
index 02d15bb..ee05e19 100644
--- a/arch/arm/mach-omap2/cpuidle44xx.c
+++ b/arch/arm/mach-omap2/cpuidle44xx.c
@@ -21,6 +21,7 @@
#include "common.h"
#include "pm.h"
#include "prm.h"
+#include "clockdomain.h"
/* Machine specific information */
struct omap4_idle_statedata {
@@ -47,10 +48,14 @@
},
};
-static struct powerdomain *mpu_pd, *cpu0_pd, *cpu1_pd;
+static struct powerdomain *mpu_pd, *cpu_pd[NR_CPUS];
+static struct clockdomain *cpu_clkdm[NR_CPUS];
+
+static atomic_t abort_barrier;
+static bool cpu_done[NR_CPUS];
/**
- * omap4_enter_idle - Programs OMAP4 to enter the specified state
+ * omap4_enter_idle_coupled_[simple/coupled] - OMAP4 cpuidle entry functions
* @dev: cpuidle device
* @drv: cpuidle driver
* @index: the index of state to be entered
@@ -59,60 +64,84 @@
* specified low power state selected by the governor.
* Returns the amount of time spent in the low power state.
*/
-static int omap4_enter_idle(struct cpuidle_device *dev,
+static int omap4_enter_idle_simple(struct cpuidle_device *dev,
+ struct cpuidle_driver *drv,
+ int index)
+{
+ local_fiq_disable();
+ omap_do_wfi();
+ local_fiq_enable();
+
+ return index;
+}
+
+static int omap4_enter_idle_coupled(struct cpuidle_device *dev,
struct cpuidle_driver *drv,
int index)
{
struct omap4_idle_statedata *cx = &omap4_idle_data[index];
- u32 cpu1_state;
int cpu_id = smp_processor_id();
local_fiq_disable();
/*
- * CPU0 has to stay ON (i.e in C1) until CPU1 is OFF state.
+ * CPU0 has to wait and stay ON until CPU1 is OFF state.
* This is necessary to honour hardware recommondation
* of triggeing all the possible low power modes once CPU1 is
* out of coherency and in OFF mode.
- * Update dev->last_state so that governor stats reflects right
- * data.
*/
- cpu1_state = pwrdm_read_pwrst(cpu1_pd);
- if (cpu1_state != PWRDM_POWER_OFF) {
- index = drv->safe_state_index;
- cx = &omap4_idle_data[index];
+ if (dev->cpu == 0 && cpumask_test_cpu(1, cpu_online_mask)) {
+ while (pwrdm_read_pwrst(cpu_pd[1]) != PWRDM_POWER_OFF) {
+ cpu_relax();
+
+ /*
+ * CPU1 could have already entered & exited idle
+ * without hitting off because of a wakeup
+ * or a failed attempt to hit off mode. Check for
+ * that here, otherwise we could spin forever
+ * waiting for CPU1 off.
+ */
+ if (cpu_done[1])
+ goto fail;
+
+ }
}
- if (index > 0)
- clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu_id);
+ clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu_id);
/*
* Call idle CPU PM enter notifier chain so that
* VFP and per CPU interrupt context is saved.
*/
- if (cx->cpu_state == PWRDM_POWER_OFF)
- cpu_pm_enter();
+ cpu_pm_enter();
- pwrdm_set_logic_retst(mpu_pd, cx->mpu_logic_state);
- omap_set_pwrdm_state(mpu_pd, cx->mpu_state);
+ if (dev->cpu == 0) {
+ pwrdm_set_logic_retst(mpu_pd, cx->mpu_logic_state);
+ omap_set_pwrdm_state(mpu_pd, cx->mpu_state);
- /*
- * Call idle CPU cluster PM enter notifier chain
- * to save GIC and wakeupgen context.
- */
- if ((cx->mpu_state == PWRDM_POWER_RET) &&
- (cx->mpu_logic_state == PWRDM_POWER_OFF))
- cpu_cluster_pm_enter();
+ /*
+ * Call idle CPU cluster PM enter notifier chain
+ * to save GIC and wakeupgen context.
+ */
+ if ((cx->mpu_state == PWRDM_POWER_RET) &&
+ (cx->mpu_logic_state == PWRDM_POWER_OFF))
+ cpu_cluster_pm_enter();
+ }
omap4_enter_lowpower(dev->cpu, cx->cpu_state);
+ cpu_done[dev->cpu] = true;
+
+ /* Wakeup CPU1 only if it is not offlined */
+ if (dev->cpu == 0 && cpumask_test_cpu(1, cpu_online_mask)) {
+ clkdm_wakeup(cpu_clkdm[1]);
+ clkdm_allow_idle(cpu_clkdm[1]);
+ }
/*
* Call idle CPU PM exit notifier chain to restore
- * VFP and per CPU IRQ context. Only CPU0 state is
- * considered since CPU1 is managed by CPU hotplug.
+ * VFP and per CPU IRQ context.
*/
- if (pwrdm_read_prev_pwrst(cpu0_pd) == PWRDM_POWER_OFF)
- cpu_pm_exit();
+ cpu_pm_exit();
/*
* Call idle CPU cluster PM exit notifier chain
@@ -121,8 +150,11 @@
if (omap4_mpuss_read_prev_context_state())
cpu_cluster_pm_exit();
- if (index > 0)
- clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu_id);
+ clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu_id);
+
+fail:
+ cpuidle_coupled_parallel_barrier(dev, &abort_barrier);
+ cpu_done[dev->cpu] = false;
local_fiq_enable();
@@ -141,7 +173,7 @@
.exit_latency = 2 + 2,
.target_residency = 5,
.flags = CPUIDLE_FLAG_TIME_VALID,
- .enter = omap4_enter_idle,
+ .enter = omap4_enter_idle_simple,
.name = "C1",
.desc = "MPUSS ON"
},
@@ -149,8 +181,8 @@
/* C2 - CPU0 OFF + CPU1 OFF + MPU CSWR */
.exit_latency = 328 + 440,
.target_residency = 960,
- .flags = CPUIDLE_FLAG_TIME_VALID,
- .enter = omap4_enter_idle,
+ .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED,
+ .enter = omap4_enter_idle_coupled,
.name = "C2",
.desc = "MPUSS CSWR",
},
@@ -158,8 +190,8 @@
/* C3 - CPU0 OFF + CPU1 OFF + MPU OSWR */
.exit_latency = 460 + 518,
.target_residency = 1100,
- .flags = CPUIDLE_FLAG_TIME_VALID,
- .enter = omap4_enter_idle,
+ .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED,
+ .enter = omap4_enter_idle_coupled,
.name = "C3",
.desc = "MPUSS OSWR",
},
@@ -168,6 +200,16 @@
.safe_state_index = 0,
};
+/*
+ * For each cpu, setup the broadcast timer because local timers
+ * stops for the states above C1.
+ */
+static void omap_setup_broadcast_timer(void *arg)
+{
+ int cpu = smp_processor_id();
+ clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ON, &cpu);
+}
+
/**
* omap4_idle_init - Init routine for OMAP4 idle
*
@@ -180,19 +222,30 @@
unsigned int cpu_id = 0;
mpu_pd = pwrdm_lookup("mpu_pwrdm");
- cpu0_pd = pwrdm_lookup("cpu0_pwrdm");
- cpu1_pd = pwrdm_lookup("cpu1_pwrdm");
- if ((!mpu_pd) || (!cpu0_pd) || (!cpu1_pd))
+ cpu_pd[0] = pwrdm_lookup("cpu0_pwrdm");
+ cpu_pd[1] = pwrdm_lookup("cpu1_pwrdm");
+ if ((!mpu_pd) || (!cpu_pd[0]) || (!cpu_pd[1]))
return -ENODEV;
- dev = &per_cpu(omap4_idle_dev, cpu_id);
- dev->cpu = cpu_id;
+ cpu_clkdm[0] = clkdm_lookup("mpu0_clkdm");
+ cpu_clkdm[1] = clkdm_lookup("mpu1_clkdm");
+ if (!cpu_clkdm[0] || !cpu_clkdm[1])
+ return -ENODEV;
- cpuidle_register_driver(&omap4_idle_driver);
+ /* Configure the broadcast timer on each cpu */
+ on_each_cpu(omap_setup_broadcast_timer, NULL, 1);
- if (cpuidle_register_device(dev)) {
- pr_err("%s: CPUidle register device failed\n", __func__);
- return -EIO;
+ for_each_cpu(cpu_id, cpu_online_mask) {
+ dev = &per_cpu(omap4_idle_dev, cpu_id);
+ dev->cpu = cpu_id;
+ dev->coupled_cpus = *cpu_online_mask;
+
+ cpuidle_register_driver(&omap4_idle_driver);
+
+ if (cpuidle_register_device(dev)) {
+ pr_err("%s: CPUidle register failed\n", __func__);
+ return -EIO;
+ }
}
return 0;
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 13d20c8..2ff6d41 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -130,6 +130,7 @@
.name = "gp_timer",
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
.shift = 32,
+ .rating = 300,
.set_next_event = omap2_gp_timer_set_next_event,
.set_mode = omap2_gp_timer_set_mode,
};
@@ -223,7 +224,8 @@
clockevent_delta2ns(3, &clockevent_gpt);
/* Timer internal resynch latency. */
- clockevent_gpt.cpumask = cpumask_of(0);
+ clockevent_gpt.cpumask = cpu_possible_mask;
+ clockevent_gpt.irq = omap_dm_timer_get_irq(&clkev);
clockevents_register_device(&clockevent_gpt);
pr_info("OMAP clockevent source: GPTIMER%d at %lu Hz\n",
diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c
index b1b45ff..17da709 100644
--- a/arch/arm/mach-orion5x/irq.c
+++ b/arch/arm/mach-orion5x/irq.c
@@ -11,19 +11,16 @@
*/
#include <linux/gpio.h>
#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/irq.h>
-#include <linux/io.h>
#include <mach/bridge-regs.h>
#include <plat/irq.h>
-#include "common.h"
-static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
- BUG_ON(irq < IRQ_ORION5X_GPIO_0_7 || irq > IRQ_ORION5X_GPIO_24_31);
-
- orion_gpio_irq_handler((irq - IRQ_ORION5X_GPIO_0_7) << 3);
-}
+static int __initdata gpio0_irqs[4] = {
+ IRQ_ORION5X_GPIO_0_7,
+ IRQ_ORION5X_GPIO_8_15,
+ IRQ_ORION5X_GPIO_16_23,
+ IRQ_ORION5X_GPIO_24_31,
+};
void __init orion5x_init_irq(void)
{
@@ -32,9 +29,6 @@
/*
* Initialize gpiolib for GPIOs 0-31.
*/
- orion_gpio_init(0, 32, GPIO_VIRT_BASE, 0, IRQ_ORION5X_GPIO_START);
- irq_set_chained_handler(IRQ_ORION5X_GPIO_0_7, gpio_irq_handler);
- irq_set_chained_handler(IRQ_ORION5X_GPIO_8_15, gpio_irq_handler);
- irq_set_chained_handler(IRQ_ORION5X_GPIO_16_23, gpio_irq_handler);
- irq_set_chained_handler(IRQ_ORION5X_GPIO_24_31, gpio_irq_handler);
+ orion_gpio_init(NULL, 0, 32, (void __iomem *)GPIO_VIRT_BASE, 0,
+ IRQ_ORION5X_GPIO_START, gpio0_irqs);
}
diff --git a/arch/arm/mach-prima2/timer.c b/arch/arm/mach-prima2/timer.c
index 0d024b1..f224107 100644
--- a/arch/arm/mach-prima2/timer.c
+++ b/arch/arm/mach-prima2/timer.c
@@ -132,11 +132,11 @@
{
int i;
- for (i = 0; i < SIRFSOC_TIMER_REG_CNT; i++)
+ for (i = 0; i < SIRFSOC_TIMER_REG_CNT - 2; i++)
writel_relaxed(sirfsoc_timer_reg_val[i], sirfsoc_timer_base + sirfsoc_timer_reg_list[i]);
- writel_relaxed(sirfsoc_timer_reg_val[i - 2], sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_LO);
- writel_relaxed(sirfsoc_timer_reg_val[i - 1], sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_HI);
+ writel_relaxed(sirfsoc_timer_reg_val[SIRFSOC_TIMER_REG_CNT - 2], sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_LO);
+ writel_relaxed(sirfsoc_timer_reg_val[SIRFSOC_TIMER_REG_CNT - 1], sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_HI);
}
static struct clock_event_device sirfsoc_clockevent = {
diff --git a/arch/arm/plat-mxc/tzic.c b/arch/arm/plat-mxc/tzic.c
index c219317..3ed1adb 100644
--- a/arch/arm/plat-mxc/tzic.c
+++ b/arch/arm/plat-mxc/tzic.c
@@ -23,6 +23,7 @@
#include <mach/hardware.h>
#include <mach/common.h>
+#include <mach/irqs.h>
#include "irq-common.h"
diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c
index c179378..d245a87 100644
--- a/arch/arm/plat-orion/common.c
+++ b/arch/arm/plat-orion/common.c
@@ -47,6 +47,7 @@
orion_clkdev_add(NULL, MV643XX_ETH_NAME ".2", tclk);
orion_clkdev_add(NULL, MV643XX_ETH_NAME ".3", tclk);
orion_clkdev_add(NULL, "orion_wdt", tclk);
+ orion_clkdev_add(NULL, MV64XXX_I2C_CTLR_NAME ".0", tclk);
}
/* Fill in the resources structure and link it into the platform
diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c
index af95af2..dfda74f 100644
--- a/arch/arm/plat-orion/gpio.c
+++ b/arch/arm/plat-orion/gpio.c
@@ -8,15 +8,22 @@
* warranty of any kind, whether express or implied.
*/
+#define DEBUG
+
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/irq.h>
+#include <linux/irqdomain.h>
#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/bitops.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/leds.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+#include <plat/gpio.h>
/*
* GPIO unit register offsets.
@@ -38,6 +45,7 @@
unsigned long valid_output;
int mask_offset;
int secondary_irq_base;
+ struct irq_domain *domain;
};
static void __iomem *GPIO_OUT(struct orion_gpio_chip *ochip)
@@ -222,10 +230,10 @@
struct orion_gpio_chip *ochip =
container_of(chip, struct orion_gpio_chip, chip);
- return ochip->secondary_irq_base + pin;
+ return irq_create_mapping(ochip->domain,
+ ochip->secondary_irq_base + pin);
}
-
/*
* Orion-specific GPIO API extensions.
*/
@@ -353,12 +361,10 @@
int pin;
u32 u;
- pin = d->irq - gc->irq_base;
+ pin = d->hwirq - ochip->secondary_irq_base;
u = readl(GPIO_IO_CONF(ochip)) & (1 << pin);
if (!u) {
- printk(KERN_ERR "orion gpio_irq_set_type failed "
- "(irq %d, pin %d).\n", d->irq, pin);
return -EINVAL;
}
@@ -397,85 +403,15 @@
u &= ~(1 << pin); /* rising */
writel(u, GPIO_IN_POL(ochip));
}
-
return 0;
}
-void __init orion_gpio_init(int gpio_base, int ngpio,
- u32 base, int mask_offset, int secondary_irq_base)
+static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
{
- struct orion_gpio_chip *ochip;
- struct irq_chip_generic *gc;
- struct irq_chip_type *ct;
- char gc_label[16];
-
- if (orion_gpio_chip_count == ARRAY_SIZE(orion_gpio_chips))
- return;
-
- snprintf(gc_label, sizeof(gc_label), "orion_gpio%d",
- orion_gpio_chip_count);
-
- ochip = orion_gpio_chips + orion_gpio_chip_count;
- ochip->chip.label = kstrdup(gc_label, GFP_KERNEL);
- ochip->chip.request = orion_gpio_request;
- ochip->chip.direction_input = orion_gpio_direction_input;
- ochip->chip.get = orion_gpio_get;
- ochip->chip.direction_output = orion_gpio_direction_output;
- ochip->chip.set = orion_gpio_set;
- ochip->chip.to_irq = orion_gpio_to_irq;
- ochip->chip.base = gpio_base;
- ochip->chip.ngpio = ngpio;
- ochip->chip.can_sleep = 0;
- spin_lock_init(&ochip->lock);
- ochip->base = (void __iomem *)base;
- ochip->valid_input = 0;
- ochip->valid_output = 0;
- ochip->mask_offset = mask_offset;
- ochip->secondary_irq_base = secondary_irq_base;
-
- gpiochip_add(&ochip->chip);
-
- orion_gpio_chip_count++;
-
- /*
- * Mask and clear GPIO interrupts.
- */
- writel(0, GPIO_EDGE_CAUSE(ochip));
- writel(0, GPIO_EDGE_MASK(ochip));
- writel(0, GPIO_LEVEL_MASK(ochip));
-
- gc = irq_alloc_generic_chip("orion_gpio_irq", 2, secondary_irq_base,
- ochip->base, handle_level_irq);
- gc->private = ochip;
-
- ct = gc->chip_types;
- ct->regs.mask = ochip->mask_offset + GPIO_LEVEL_MASK_OFF;
- ct->type = IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW;
- ct->chip.irq_mask = irq_gc_mask_clr_bit;
- ct->chip.irq_unmask = irq_gc_mask_set_bit;
- ct->chip.irq_set_type = gpio_irq_set_type;
-
- ct++;
- ct->regs.mask = ochip->mask_offset + GPIO_EDGE_MASK_OFF;
- ct->regs.ack = GPIO_EDGE_CAUSE_OFF;
- ct->type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
- ct->chip.irq_ack = irq_gc_ack_clr_bit;
- ct->chip.irq_mask = irq_gc_mask_clr_bit;
- ct->chip.irq_unmask = irq_gc_mask_set_bit;
- ct->chip.irq_set_type = gpio_irq_set_type;
- ct->handler = handle_edge_irq;
-
- irq_setup_generic_chip(gc, IRQ_MSK(ngpio), IRQ_GC_INIT_MASK_CACHE,
- IRQ_NOREQUEST, IRQ_LEVEL | IRQ_NOPROBE);
-}
-
-void orion_gpio_irq_handler(int pinoff)
-{
- struct orion_gpio_chip *ochip;
+ struct orion_gpio_chip *ochip = irq_get_handler_data(irq);
u32 cause, type;
int i;
- ochip = orion_gpio_chip_find(pinoff);
if (ochip == NULL)
return;
@@ -502,3 +438,151 @@
generic_handle_irq(irq);
}
}
+
+void __init orion_gpio_init(struct device_node *np,
+ int gpio_base, int ngpio,
+ void __iomem *base, int mask_offset,
+ int secondary_irq_base,
+ int irqs[4])
+{
+ struct orion_gpio_chip *ochip;
+ struct irq_chip_generic *gc;
+ struct irq_chip_type *ct;
+ char gc_label[16];
+ int i;
+
+ if (orion_gpio_chip_count == ARRAY_SIZE(orion_gpio_chips))
+ return;
+
+ snprintf(gc_label, sizeof(gc_label), "orion_gpio%d",
+ orion_gpio_chip_count);
+
+ ochip = orion_gpio_chips + orion_gpio_chip_count;
+ ochip->chip.label = kstrdup(gc_label, GFP_KERNEL);
+ ochip->chip.request = orion_gpio_request;
+ ochip->chip.direction_input = orion_gpio_direction_input;
+ ochip->chip.get = orion_gpio_get;
+ ochip->chip.direction_output = orion_gpio_direction_output;
+ ochip->chip.set = orion_gpio_set;
+ ochip->chip.to_irq = orion_gpio_to_irq;
+ ochip->chip.base = gpio_base;
+ ochip->chip.ngpio = ngpio;
+ ochip->chip.can_sleep = 0;
+#ifdef CONFIG_OF
+ ochip->chip.of_node = np;
+#endif
+
+ spin_lock_init(&ochip->lock);
+ ochip->base = (void __iomem *)base;
+ ochip->valid_input = 0;
+ ochip->valid_output = 0;
+ ochip->mask_offset = mask_offset;
+ ochip->secondary_irq_base = secondary_irq_base;
+
+ gpiochip_add(&ochip->chip);
+
+ /*
+ * Mask and clear GPIO interrupts.
+ */
+ writel(0, GPIO_EDGE_CAUSE(ochip));
+ writel(0, GPIO_EDGE_MASK(ochip));
+ writel(0, GPIO_LEVEL_MASK(ochip));
+
+ /* Setup the interrupt handlers. Each chip can have up to 4
+ * interrupt handlers, with each handler dealing with 8 GPIO
+ * pins. */
+
+ for (i = 0; i < 4; i++) {
+ if (irqs[i]) {
+ irq_set_handler_data(irqs[i], ochip);
+ irq_set_chained_handler(irqs[i], gpio_irq_handler);
+ }
+ }
+
+ gc = irq_alloc_generic_chip("orion_gpio_irq", 2,
+ secondary_irq_base,
+ ochip->base, handle_level_irq);
+ gc->private = ochip;
+ ct = gc->chip_types;
+ ct->regs.mask = ochip->mask_offset + GPIO_LEVEL_MASK_OFF;
+ ct->type = IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW;
+ ct->chip.irq_mask = irq_gc_mask_clr_bit;
+ ct->chip.irq_unmask = irq_gc_mask_set_bit;
+ ct->chip.irq_set_type = gpio_irq_set_type;
+ ct->chip.name = ochip->chip.label;
+
+ ct++;
+ ct->regs.mask = ochip->mask_offset + GPIO_EDGE_MASK_OFF;
+ ct->regs.ack = GPIO_EDGE_CAUSE_OFF;
+ ct->type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
+ ct->chip.irq_ack = irq_gc_ack_clr_bit;
+ ct->chip.irq_mask = irq_gc_mask_clr_bit;
+ ct->chip.irq_unmask = irq_gc_mask_set_bit;
+ ct->chip.irq_set_type = gpio_irq_set_type;
+ ct->handler = handle_edge_irq;
+ ct->chip.name = ochip->chip.label;
+
+ irq_setup_generic_chip(gc, IRQ_MSK(ngpio), IRQ_GC_INIT_MASK_CACHE,
+ IRQ_NOREQUEST, IRQ_LEVEL | IRQ_NOPROBE);
+
+ /* Setup irq domain on top of the generic chip. */
+ ochip->domain = irq_domain_add_legacy(np,
+ ochip->chip.ngpio,
+ ochip->secondary_irq_base,
+ ochip->secondary_irq_base,
+ &irq_domain_simple_ops,
+ ochip);
+ if (!ochip->domain)
+ panic("%s: couldn't allocate irq domain (DT).\n",
+ ochip->chip.label);
+
+ orion_gpio_chip_count++;
+}
+
+#ifdef CONFIG_OF
+static void __init orion_gpio_of_init_one(struct device_node *np,
+ int irq_gpio_base)
+{
+ int ngpio, gpio_base, mask_offset;
+ void __iomem *base;
+ int ret, i;
+ int irqs[4];
+ int secondary_irq_base;
+
+ ret = of_property_read_u32(np, "ngpio", &ngpio);
+ if (ret)
+ goto out;
+ ret = of_property_read_u32(np, "mask-offset", &mask_offset);
+ if (ret == -EINVAL)
+ mask_offset = 0;
+ else
+ goto out;
+ base = of_iomap(np, 0);
+ if (!base)
+ goto out;
+
+ secondary_irq_base = irq_gpio_base + (32 * orion_gpio_chip_count);
+ gpio_base = 32 * orion_gpio_chip_count;
+
+ /* Get the interrupt numbers. Each chip can have up to 4
+ * interrupt handlers, with each handler dealing with 8 GPIO
+ * pins. */
+
+ for (i = 0; i < 4; i++)
+ irqs[i] = irq_of_parse_and_map(np, i);
+
+ orion_gpio_init(np, gpio_base, ngpio, base, mask_offset,
+ secondary_irq_base, irqs);
+ return;
+out:
+ pr_err("%s: %s: missing mandatory property\n", __func__, np->name);
+}
+
+void __init orion_gpio_of_init(int irq_gpio_base)
+{
+ struct device_node *np;
+
+ for_each_compatible_node(np, NULL, "marvell,orion-gpio")
+ orion_gpio_of_init_one(np, irq_gpio_base);
+}
+#endif
diff --git a/arch/arm/plat-orion/include/plat/gpio.h b/arch/arm/plat-orion/include/plat/gpio.h
index bec0c98..81c6fc8 100644
--- a/arch/arm/plat-orion/include/plat/gpio.h
+++ b/arch/arm/plat-orion/include/plat/gpio.h
@@ -13,7 +13,7 @@
#include <linux/init.h>
#include <linux/types.h>
-
+#include <linux/irqdomain.h>
/*
* Orion-specific GPIO API extensions.
*/
@@ -27,13 +27,11 @@
void orion_gpio_set_valid(unsigned pin, int mode);
/* Initialize gpiolib. */
-void __init orion_gpio_init(int gpio_base, int ngpio,
- u32 base, int mask_offset, int secondary_irq_base);
+void __init orion_gpio_init(struct device_node *np,
+ int gpio_base, int ngpio,
+ void __iomem *base, int mask_offset,
+ int secondary_irq_base,
+ int irq[4]);
-/*
- * GPIO interrupt handling.
- */
-void orion_gpio_irq_handler(int irqoff);
-
-
+void __init orion_gpio_of_init(int irq_gpio_base);
#endif
diff --git a/arch/arm/plat-orion/include/plat/irq.h b/arch/arm/plat-orion/include/plat/irq.h
index f05eeab..50547e4 100644
--- a/arch/arm/plat-orion/include/plat/irq.h
+++ b/arch/arm/plat-orion/include/plat/irq.h
@@ -12,6 +12,5 @@
#define __PLAT_IRQ_H
void orion_irq_init(unsigned int irq_start, void __iomem *maskaddr);
-
-
+void __init orion_dt_init_irq(void);
#endif
diff --git a/arch/arm/plat-orion/irq.c b/arch/arm/plat-orion/irq.c
index 2d5b9c1..d751964 100644
--- a/arch/arm/plat-orion/irq.c
+++ b/arch/arm/plat-orion/irq.c
@@ -11,8 +11,12 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/irq.h>
+#include <linux/irqdomain.h>
#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
#include <plat/irq.h>
+#include <plat/gpio.h>
void __init orion_irq_init(unsigned int irq_start, void __iomem *maskaddr)
{
@@ -32,3 +36,39 @@
irq_setup_generic_chip(gc, IRQ_MSK(32), IRQ_GC_INIT_MASK_CACHE,
IRQ_NOREQUEST, IRQ_LEVEL | IRQ_NOPROBE);
}
+
+#ifdef CONFIG_OF
+static int __init orion_add_irq_domain(struct device_node *np,
+ struct device_node *interrupt_parent)
+{
+ int i = 0, irq_gpio;
+ void __iomem *base;
+
+ do {
+ base = of_iomap(np, i);
+ if (base) {
+ orion_irq_init(i * 32, base);
+ i++;
+ }
+ } while (base);
+
+ irq_domain_add_legacy(np, i * 32, 0, 0,
+ &irq_domain_simple_ops, NULL);
+
+ irq_gpio = i * 32;
+ orion_gpio_of_init(irq_gpio);
+
+ return 0;
+}
+
+static const struct of_device_id orion_irq_match[] = {
+ { .compatible = "marvell,orion-intc",
+ .data = orion_add_irq_domain, },
+ {},
+};
+
+void __init orion_dt_init_irq(void)
+{
+ of_irq_init(orion_irq_match);
+}
+#endif
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index ada8f0f..fb96e60 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -52,7 +52,6 @@
#ifdef CONFIG_MTD_UCLINUX
extern struct map_info uclinux_ram_map;
unsigned long memory_mtd_end, memory_mtd_start, mtd_size;
-unsigned long _ebss;
EXPORT_SYMBOL(memory_mtd_end);
EXPORT_SYMBOL(memory_mtd_start);
EXPORT_SYMBOL(mtd_size);
diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c
index 6f38b61..44057885 100644
--- a/arch/ia64/kernel/acpi.c
+++ b/arch/ia64/kernel/acpi.c
@@ -497,7 +497,7 @@
srat_num_cpus++;
}
-void __init
+int __init
acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma)
{
unsigned long paddr, size;
@@ -512,7 +512,7 @@
/* Ignore disabled entries */
if (!(ma->flags & ACPI_SRAT_MEM_ENABLED))
- return;
+ return -1;
/* record this node in proximity bitmap */
pxm_bit_set(pxm);
@@ -531,6 +531,7 @@
p->size = size;
p->nid = pxm;
num_node_memblks++;
+ return 0;
}
void __init acpi_numa_arch_fixup(void)
diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index 0b0f8b8..4a46990 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -54,18 +54,6 @@
bool
default y
-config CPU_HAS_NO_BITFIELDS
- bool
-
-config CPU_HAS_NO_MULDIV64
- bool
-
-config CPU_HAS_ADDRESS_SPACES
- bool
-
-config FPU
- bool
-
config HZ
int
default 1000 if CLEOPATRA
diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu
index 43a9f8f..8206834 100644
--- a/arch/m68k/Kconfig.cpu
+++ b/arch/m68k/Kconfig.cpu
@@ -37,6 +37,7 @@
bool
select CPU_HAS_NO_BITFIELDS
select CPU_HAS_NO_MULDIV64
+ select CPU_HAS_NO_UNALIGNED
select GENERIC_CSUM
help
The Freescale (was Motorola) 68000 CPU is the first generation of
@@ -48,6 +49,7 @@
config MCPU32
bool
select CPU_HAS_NO_BITFIELDS
+ select CPU_HAS_NO_UNALIGNED
help
The Freescale (was then Motorola) CPU32 is a CPU core that is
based on the 68020 processor. For the most part it is used in
@@ -376,6 +378,18 @@
default "3"
depends on !SINGLE_MEMORY_CHUNK
+config CPU_HAS_NO_BITFIELDS
+ bool
+
+config CPU_HAS_NO_MULDIV64
+ bool
+
+config CPU_HAS_NO_UNALIGNED
+ bool
+
+config CPU_HAS_ADDRESS_SPACES
+ bool
+
config FPU
bool
diff --git a/arch/m68k/apollo/config.c b/arch/m68k/apollo/config.c
index 0a30406..f5565d6 100644
--- a/arch/m68k/apollo/config.c
+++ b/arch/m68k/apollo/config.c
@@ -177,8 +177,8 @@
timer_handler(irq, dev_id);
- x=*(volatile unsigned char *)(timer+3);
- x=*(volatile unsigned char *)(timer+5);
+ x = *(volatile unsigned char *)(apollo_timer + 3);
+ x = *(volatile unsigned char *)(apollo_timer + 5);
return IRQ_HANDLED;
}
@@ -186,17 +186,17 @@
void dn_sched_init(irq_handler_t timer_routine)
{
/* program timer 1 */
- *(volatile unsigned char *)(timer+3)=0x01;
- *(volatile unsigned char *)(timer+1)=0x40;
- *(volatile unsigned char *)(timer+5)=0x09;
- *(volatile unsigned char *)(timer+7)=0xc4;
+ *(volatile unsigned char *)(apollo_timer + 3) = 0x01;
+ *(volatile unsigned char *)(apollo_timer + 1) = 0x40;
+ *(volatile unsigned char *)(apollo_timer + 5) = 0x09;
+ *(volatile unsigned char *)(apollo_timer + 7) = 0xc4;
/* enable IRQ of PIC B */
*(volatile unsigned char *)(pica+1)&=(~8);
#if 0
- printk("*(0x10803) %02x\n",*(volatile unsigned char *)(timer+0x3));
- printk("*(0x10803) %02x\n",*(volatile unsigned char *)(timer+0x3));
+ printk("*(0x10803) %02x\n",*(volatile unsigned char *)(apollo_timer + 0x3));
+ printk("*(0x10803) %02x\n",*(volatile unsigned char *)(apollo_timer + 0x3));
#endif
if (request_irq(IRQ_APOLLO, dn_timer_int, 0, "time", timer_routine))
diff --git a/arch/m68k/include/asm/Kbuild b/arch/m68k/include/asm/Kbuild
index eafa253..a74e5d9 100644
--- a/arch/m68k/include/asm/Kbuild
+++ b/arch/m68k/include/asm/Kbuild
@@ -1,4 +1,29 @@
include include/asm-generic/Kbuild.asm
header-y += cachectl.h
+generic-y += bitsperlong.h
+generic-y += cputime.h
+generic-y += device.h
+generic-y += emergency-restart.h
+generic-y += errno.h
+generic-y += futex.h
+generic-y += ioctl.h
+generic-y += ipcbuf.h
+generic-y += irq_regs.h
+generic-y += kdebug.h
+generic-y += kmap_types.h
+generic-y += kvm_para.h
+generic-y += local64.h
+generic-y += local.h
+generic-y += mman.h
+generic-y += mutex.h
+generic-y += percpu.h
+generic-y += resource.h
+generic-y += scatterlist.h
+generic-y += sections.h
+generic-y += siginfo.h
+generic-y += statfs.h
+generic-y += topology.h
+generic-y += types.h
generic-y += word-at-a-time.h
+generic-y += xor.h
diff --git a/arch/m68k/include/asm/MC68332.h b/arch/m68k/include/asm/MC68332.h
deleted file mode 100644
index 6bb8f02..0000000
--- a/arch/m68k/include/asm/MC68332.h
+++ /dev/null
@@ -1,152 +0,0 @@
-
-/* include/asm-m68knommu/MC68332.h: '332 control registers
- *
- * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com>,
- *
- */
-
-#ifndef _MC68332_H_
-#define _MC68332_H_
-
-#define BYTE_REF(addr) (*((volatile unsigned char*)addr))
-#define WORD_REF(addr) (*((volatile unsigned short*)addr))
-
-#define PORTE_ADDR 0xfffa11
-#define PORTE BYTE_REF(PORTE_ADDR)
-#define DDRE_ADDR 0xfffa15
-#define DDRE BYTE_REF(DDRE_ADDR)
-#define PEPAR_ADDR 0xfffa17
-#define PEPAR BYTE_REF(PEPAR_ADDR)
-
-#define PORTF_ADDR 0xfffa19
-#define PORTF BYTE_REF(PORTF_ADDR)
-#define DDRF_ADDR 0xfffa1d
-#define DDRF BYTE_REF(DDRF_ADDR)
-#define PFPAR_ADDR 0xfffa1f
-#define PFPAR BYTE_REF(PFPAR_ADDR)
-
-#define PORTQS_ADDR 0xfffc15
-#define PORTQS BYTE_REF(PORTQS_ADDR)
-#define DDRQS_ADDR 0xfffc17
-#define DDRQS BYTE_REF(DDRQS_ADDR)
-#define PQSPAR_ADDR 0xfffc16
-#define PQSPAR BYTE_REF(PQSPAR_ADDR)
-
-#define CSPAR0_ADDR 0xFFFA44
-#define CSPAR0 WORD_REF(CSPAR0_ADDR)
-#define CSPAR1_ADDR 0xFFFA46
-#define CSPAR1 WORD_REF(CSPAR1_ADDR)
-#define CSARBT_ADDR 0xFFFA48
-#define CSARBT WORD_REF(CSARBT_ADDR)
-#define CSOPBT_ADDR 0xFFFA4A
-#define CSOPBT WORD_REF(CSOPBT_ADDR)
-#define CSBAR0_ADDR 0xFFFA4C
-#define CSBAR0 WORD_REF(CSBAR0_ADDR)
-#define CSOR0_ADDR 0xFFFA4E
-#define CSOR0 WORD_REF(CSOR0_ADDR)
-#define CSBAR1_ADDR 0xFFFA50
-#define CSBAR1 WORD_REF(CSBAR1_ADDR)
-#define CSOR1_ADDR 0xFFFA52
-#define CSOR1 WORD_REF(CSOR1_ADDR)
-#define CSBAR2_ADDR 0xFFFA54
-#define CSBAR2 WORD_REF(CSBAR2_ADDR)
-#define CSOR2_ADDR 0xFFFA56
-#define CSOR2 WORD_REF(CSOR2_ADDR)
-#define CSBAR3_ADDR 0xFFFA58
-#define CSBAR3 WORD_REF(CSBAR3_ADDR)
-#define CSOR3_ADDR 0xFFFA5A
-#define CSOR3 WORD_REF(CSOR3_ADDR)
-#define CSBAR4_ADDR 0xFFFA5C
-#define CSBAR4 WORD_REF(CSBAR4_ADDR)
-#define CSOR4_ADDR 0xFFFA5E
-#define CSOR4 WORD_REF(CSOR4_ADDR)
-#define CSBAR5_ADDR 0xFFFA60
-#define CSBAR5 WORD_REF(CSBAR5_ADDR)
-#define CSOR5_ADDR 0xFFFA62
-#define CSOR5 WORD_REF(CSOR5_ADDR)
-#define CSBAR6_ADDR 0xFFFA64
-#define CSBAR6 WORD_REF(CSBAR6_ADDR)
-#define CSOR6_ADDR 0xFFFA66
-#define CSOR6 WORD_REF(CSOR6_ADDR)
-#define CSBAR7_ADDR 0xFFFA68
-#define CSBAR7 WORD_REF(CSBAR7_ADDR)
-#define CSOR7_ADDR 0xFFFA6A
-#define CSOR7 WORD_REF(CSOR7_ADDR)
-#define CSBAR8_ADDR 0xFFFA6C
-#define CSBAR8 WORD_REF(CSBAR8_ADDR)
-#define CSOR8_ADDR 0xFFFA6E
-#define CSOR8 WORD_REF(CSOR8_ADDR)
-#define CSBAR9_ADDR 0xFFFA70
-#define CSBAR9 WORD_REF(CSBAR9_ADDR)
-#define CSOR9_ADDR 0xFFFA72
-#define CSOR9 WORD_REF(CSOR9_ADDR)
-#define CSBAR10_ADDR 0xFFFA74
-#define CSBAR10 WORD_REF(CSBAR10_ADDR)
-#define CSOR10_ADDR 0xFFFA76
-#define CSOR10 WORD_REF(CSOR10_ADDR)
-
-#define CSOR_MODE_ASYNC 0x0000
-#define CSOR_MODE_SYNC 0x8000
-#define CSOR_MODE_MASK 0x8000
-#define CSOR_BYTE_DISABLE 0x0000
-#define CSOR_BYTE_UPPER 0x4000
-#define CSOR_BYTE_LOWER 0x2000
-#define CSOR_BYTE_BOTH 0x6000
-#define CSOR_BYTE_MASK 0x6000
-#define CSOR_RW_RSVD 0x0000
-#define CSOR_RW_READ 0x0800
-#define CSOR_RW_WRITE 0x1000
-#define CSOR_RW_BOTH 0x1800
-#define CSOR_RW_MASK 0x1800
-#define CSOR_STROBE_DS 0x0400
-#define CSOR_STROBE_AS 0x0000
-#define CSOR_STROBE_MASK 0x0400
-#define CSOR_DSACK_WAIT(x) (wait << 6)
-#define CSOR_DSACK_FTERM (14 << 6)
-#define CSOR_DSACK_EXTERNAL (15 << 6)
-#define CSOR_DSACK_MASK 0x03c0
-#define CSOR_SPACE_CPU 0x0000
-#define CSOR_SPACE_USER 0x0010
-#define CSOR_SPACE_SU 0x0020
-#define CSOR_SPACE_BOTH 0x0030
-#define CSOR_SPACE_MASK 0x0030
-#define CSOR_IPL_ALL 0x0000
-#define CSOR_IPL_PRIORITY(x) (x << 1)
-#define CSOR_IPL_MASK 0x000e
-#define CSOR_AVEC_ON 0x0001
-#define CSOR_AVEC_OFF 0x0000
-#define CSOR_AVEC_MASK 0x0001
-
-#define CSBAR_ADDR(x) ((addr >> 11) << 3)
-#define CSBAR_ADDR_MASK 0xfff8
-#define CSBAR_BLKSIZE_2K 0x0000
-#define CSBAR_BLKSIZE_8K 0x0001
-#define CSBAR_BLKSIZE_16K 0x0002
-#define CSBAR_BLKSIZE_64K 0x0003
-#define CSBAR_BLKSIZE_128K 0x0004
-#define CSBAR_BLKSIZE_256K 0x0005
-#define CSBAR_BLKSIZE_512K 0x0006
-#define CSBAR_BLKSIZE_1M 0x0007
-#define CSBAR_BLKSIZE_MASK 0x0007
-
-#define CSPAR_DISC 0
-#define CSPAR_ALT 1
-#define CSPAR_CS8 2
-#define CSPAR_CS16 3
-#define CSPAR_MASK 3
-
-#define CSPAR0_CSBOOT(x) (x << 0)
-#define CSPAR0_CS0(x) (x << 2)
-#define CSPAR0_CS1(x) (x << 4)
-#define CSPAR0_CS2(x) (x << 6)
-#define CSPAR0_CS3(x) (x << 8)
-#define CSPAR0_CS4(x) (x << 10)
-#define CSPAR0_CS5(x) (x << 12)
-
-#define CSPAR1_CS6(x) (x << 0)
-#define CSPAR1_CS7(x) (x << 2)
-#define CSPAR1_CS8(x) (x << 4)
-#define CSPAR1_CS9(x) (x << 6)
-#define CSPAR1_CS10(x) (x << 8)
-
-#endif
diff --git a/arch/m68k/include/asm/apollodma.h b/arch/m68k/include/asm/apollodma.h
deleted file mode 100644
index 954adc8..0000000
--- a/arch/m68k/include/asm/apollodma.h
+++ /dev/null
@@ -1,248 +0,0 @@
-/*
- * linux/include/asm/dma.h: Defines for using and allocating dma channels.
- * Written by Hennus Bergman, 1992.
- * High DMA channel support & info by Hannu Savolainen
- * and John Boyd, Nov. 1992.
- */
-
-#ifndef _ASM_APOLLO_DMA_H
-#define _ASM_APOLLO_DMA_H
-
-#include <asm/apollohw.h> /* need byte IO */
-#include <linux/spinlock.h> /* And spinlocks */
-#include <linux/delay.h>
-
-
-#define dma_outb(val,addr) (*((volatile unsigned char *)(addr+IO_BASE)) = (val))
-#define dma_inb(addr) (*((volatile unsigned char *)(addr+IO_BASE)))
-
-/*
- * NOTES about DMA transfers:
- *
- * controller 1: channels 0-3, byte operations, ports 00-1F
- * controller 2: channels 4-7, word operations, ports C0-DF
- *
- * - ALL registers are 8 bits only, regardless of transfer size
- * - channel 4 is not used - cascades 1 into 2.
- * - channels 0-3 are byte - addresses/counts are for physical bytes
- * - channels 5-7 are word - addresses/counts are for physical words
- * - transfers must not cross physical 64K (0-3) or 128K (5-7) boundaries
- * - transfer count loaded to registers is 1 less than actual count
- * - controller 2 offsets are all even (2x offsets for controller 1)
- * - page registers for 5-7 don't use data bit 0, represent 128K pages
- * - page registers for 0-3 use bit 0, represent 64K pages
- *
- * DMA transfers are limited to the lower 16MB of _physical_ memory.
- * Note that addresses loaded into registers must be _physical_ addresses,
- * not logical addresses (which may differ if paging is active).
- *
- * Address mapping for channels 0-3:
- *
- * A23 ... A16 A15 ... A8 A7 ... A0 (Physical addresses)
- * | ... | | ... | | ... |
- * | ... | | ... | | ... |
- * | ... | | ... | | ... |
- * P7 ... P0 A7 ... A0 A7 ... A0
- * | Page | Addr MSB | Addr LSB | (DMA registers)
- *
- * Address mapping for channels 5-7:
- *
- * A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0 (Physical addresses)
- * | ... | \ \ ... \ \ \ ... \ \
- * | ... | \ \ ... \ \ \ ... \ (not used)
- * | ... | \ \ ... \ \ \ ... \
- * P7 ... P1 (0) A7 A6 ... A0 A7 A6 ... A0
- * | Page | Addr MSB | Addr LSB | (DMA registers)
- *
- * Again, channels 5-7 transfer _physical_ words (16 bits), so addresses
- * and counts _must_ be word-aligned (the lowest address bit is _ignored_ at
- * the hardware level, so odd-byte transfers aren't possible).
- *
- * Transfer count (_not # bytes_) is limited to 64K, represented as actual
- * count - 1 : 64K => 0xFFFF, 1 => 0x0000. Thus, count is always 1 or more,
- * and up to 128K bytes may be transferred on channels 5-7 in one operation.
- *
- */
-
-#define MAX_DMA_CHANNELS 8
-
-/* The maximum address that we can perform a DMA transfer to on this platform */#define MAX_DMA_ADDRESS (PAGE_OFFSET+0x1000000)
-
-/* 8237 DMA controllers */
-#define IO_DMA1_BASE 0x10C00 /* 8 bit slave DMA, channels 0..3 */
-#define IO_DMA2_BASE 0x10D00 /* 16 bit master DMA, ch 4(=slave input)..7 */
-
-/* DMA controller registers */
-#define DMA1_CMD_REG (IO_DMA1_BASE+0x08) /* command register (w) */
-#define DMA1_STAT_REG (IO_DMA1_BASE+0x08) /* status register (r) */
-#define DMA1_REQ_REG (IO_DMA1_BASE+0x09) /* request register (w) */
-#define DMA1_MASK_REG (IO_DMA1_BASE+0x0A) /* single-channel mask (w) */
-#define DMA1_MODE_REG (IO_DMA1_BASE+0x0B) /* mode register (w) */
-#define DMA1_CLEAR_FF_REG (IO_DMA1_BASE+0x0C) /* clear pointer flip-flop (w) */
-#define DMA1_TEMP_REG (IO_DMA1_BASE+0x0D) /* Temporary Register (r) */
-#define DMA1_RESET_REG (IO_DMA1_BASE+0x0D) /* Master Clear (w) */
-#define DMA1_CLR_MASK_REG (IO_DMA1_BASE+0x0E) /* Clear Mask */
-#define DMA1_MASK_ALL_REG (IO_DMA1_BASE+0x0F) /* all-channels mask (w) */
-
-#define DMA2_CMD_REG (IO_DMA2_BASE+0x10) /* command register (w) */
-#define DMA2_STAT_REG (IO_DMA2_BASE+0x10) /* status register (r) */
-#define DMA2_REQ_REG (IO_DMA2_BASE+0x12) /* request register (w) */
-#define DMA2_MASK_REG (IO_DMA2_BASE+0x14) /* single-channel mask (w) */
-#define DMA2_MODE_REG (IO_DMA2_BASE+0x16) /* mode register (w) */
-#define DMA2_CLEAR_FF_REG (IO_DMA2_BASE+0x18) /* clear pointer flip-flop (w) */
-#define DMA2_TEMP_REG (IO_DMA2_BASE+0x1A) /* Temporary Register (r) */
-#define DMA2_RESET_REG (IO_DMA2_BASE+0x1A) /* Master Clear (w) */
-#define DMA2_CLR_MASK_REG (IO_DMA2_BASE+0x1C) /* Clear Mask */
-#define DMA2_MASK_ALL_REG (IO_DMA2_BASE+0x1E) /* all-channels mask (w) */
-
-#define DMA_ADDR_0 (IO_DMA1_BASE+0x00) /* DMA address registers */
-#define DMA_ADDR_1 (IO_DMA1_BASE+0x02)
-#define DMA_ADDR_2 (IO_DMA1_BASE+0x04)
-#define DMA_ADDR_3 (IO_DMA1_BASE+0x06)
-#define DMA_ADDR_4 (IO_DMA2_BASE+0x00)
-#define DMA_ADDR_5 (IO_DMA2_BASE+0x04)
-#define DMA_ADDR_6 (IO_DMA2_BASE+0x08)
-#define DMA_ADDR_7 (IO_DMA2_BASE+0x0C)
-
-#define DMA_CNT_0 (IO_DMA1_BASE+0x01) /* DMA count registers */
-#define DMA_CNT_1 (IO_DMA1_BASE+0x03)
-#define DMA_CNT_2 (IO_DMA1_BASE+0x05)
-#define DMA_CNT_3 (IO_DMA1_BASE+0x07)
-#define DMA_CNT_4 (IO_DMA2_BASE+0x02)
-#define DMA_CNT_5 (IO_DMA2_BASE+0x06)
-#define DMA_CNT_6 (IO_DMA2_BASE+0x0A)
-#define DMA_CNT_7 (IO_DMA2_BASE+0x0E)
-
-#define DMA_MODE_READ 0x44 /* I/O to memory, no autoinit, increment, single mode */
-#define DMA_MODE_WRITE 0x48 /* memory to I/O, no autoinit, increment, single mode */
-#define DMA_MODE_CASCADE 0xC0 /* pass thru DREQ->HRQ, DACK<-HLDA only */
-
-#define DMA_AUTOINIT 0x10
-
-#define DMA_8BIT 0
-#define DMA_16BIT 1
-#define DMA_BUSMASTER 2
-
-extern spinlock_t dma_spin_lock;
-
-static __inline__ unsigned long claim_dma_lock(void)
-{
- unsigned long flags;
- spin_lock_irqsave(&dma_spin_lock, flags);
- return flags;
-}
-
-static __inline__ void release_dma_lock(unsigned long flags)
-{
- spin_unlock_irqrestore(&dma_spin_lock, flags);
-}
-
-/* enable/disable a specific DMA channel */
-static __inline__ void enable_dma(unsigned int dmanr)
-{
- if (dmanr<=3)
- dma_outb(dmanr, DMA1_MASK_REG);
- else
- dma_outb(dmanr & 3, DMA2_MASK_REG);
-}
-
-static __inline__ void disable_dma(unsigned int dmanr)
-{
- if (dmanr<=3)
- dma_outb(dmanr | 4, DMA1_MASK_REG);
- else
- dma_outb((dmanr & 3) | 4, DMA2_MASK_REG);
-}
-
-/* Clear the 'DMA Pointer Flip Flop'.
- * Write 0 for LSB/MSB, 1 for MSB/LSB access.
- * Use this once to initialize the FF to a known state.
- * After that, keep track of it. :-)
- * --- In order to do that, the DMA routines below should ---
- * --- only be used while holding the DMA lock ! ---
- */
-static __inline__ void clear_dma_ff(unsigned int dmanr)
-{
- if (dmanr<=3)
- dma_outb(0, DMA1_CLEAR_FF_REG);
- else
- dma_outb(0, DMA2_CLEAR_FF_REG);
-}
-
-/* set mode (above) for a specific DMA channel */
-static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
-{
- if (dmanr<=3)
- dma_outb(mode | dmanr, DMA1_MODE_REG);
- else
- dma_outb(mode | (dmanr&3), DMA2_MODE_REG);
-}
-
-/* Set transfer address & page bits for specific DMA channel.
- * Assumes dma flipflop is clear.
- */
-static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
-{
- if (dmanr <= 3) {
- dma_outb( a & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
- dma_outb( (a>>8) & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
- } else {
- dma_outb( (a>>1) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
- dma_outb( (a>>9) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
- }
-}
-
-
-/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for
- * a specific DMA channel.
- * You must ensure the parameters are valid.
- * NOTE: from a manual: "the number of transfers is one more
- * than the initial word count"! This is taken into account.
- * Assumes dma flip-flop is clear.
- * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7.
- */
-static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
-{
- count--;
- if (dmanr <= 3) {
- dma_outb( count & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
- dma_outb( (count>>8) & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
- } else {
- dma_outb( (count>>1) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
- dma_outb( (count>>9) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
- }
-}
-
-
-/* Get DMA residue count. After a DMA transfer, this
- * should return zero. Reading this while a DMA transfer is
- * still in progress will return unpredictable results.
- * If called before the channel has been used, it may return 1.
- * Otherwise, it returns the number of _bytes_ left to transfer.
- *
- * Assumes DMA flip-flop is clear.
- */
-static __inline__ int get_dma_residue(unsigned int dmanr)
-{
- unsigned int io_port = (dmanr<=3)? ((dmanr&3)<<1) + 1 + IO_DMA1_BASE
- : ((dmanr&3)<<2) + 2 + IO_DMA2_BASE;
-
- /* using short to get 16-bit wrap around */
- unsigned short count;
-
- count = 1 + dma_inb(io_port);
- count += dma_inb(io_port) << 8;
-
- return (dmanr<=3)? count : (count<<1);
-}
-
-
-/* These are in kernel/dma.c: */
-extern int request_dma(unsigned int dmanr, const char * device_id); /* reserve a DMA channel */
-extern void free_dma(unsigned int dmanr); /* release it again */
-
-/* These are in arch/m68k/apollo/dma.c: */
-extern unsigned short dma_map_page(unsigned long phys_addr,int count,int type);
-extern void dma_unmap_page(unsigned short dma_addr);
-
-#endif /* _ASM_APOLLO_DMA_H */
diff --git a/arch/m68k/include/asm/apollohw.h b/arch/m68k/include/asm/apollohw.h
index a1373b9..635ef4f 100644
--- a/arch/m68k/include/asm/apollohw.h
+++ b/arch/m68k/include/asm/apollohw.h
@@ -98,7 +98,7 @@
#define cpuctrl (*(volatile unsigned int *)(IO_BASE + cpuctrl_physaddr))
#define pica (IO_BASE + pica_physaddr)
#define picb (IO_BASE + picb_physaddr)
-#define timer (IO_BASE + timer_physaddr)
+#define apollo_timer (IO_BASE + timer_physaddr)
#define addr_xlat_map ((unsigned short *)(IO_BASE + 0x17000))
#define isaIO2mem(x) (((((x) & 0x3f8) << 7) | (((x) & 0xfc00) >> 6) | ((x) & 0x7)) + 0x40000 + IO_BASE)
diff --git a/arch/m68k/include/asm/bitsperlong.h b/arch/m68k/include/asm/bitsperlong.h
deleted file mode 100644
index 6dc0bb0..0000000
--- a/arch/m68k/include/asm/bitsperlong.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/bitsperlong.h>
diff --git a/arch/m68k/include/asm/cputime.h b/arch/m68k/include/asm/cputime.h
deleted file mode 100644
index c79c5e8..0000000
--- a/arch/m68k/include/asm/cputime.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __M68K_CPUTIME_H
-#define __M68K_CPUTIME_H
-
-#include <asm-generic/cputime.h>
-
-#endif /* __M68K_CPUTIME_H */
diff --git a/arch/m68k/include/asm/delay.h b/arch/m68k/include/asm/delay.h
index 9c09bec..12d8fe4 100644
--- a/arch/m68k/include/asm/delay.h
+++ b/arch/m68k/include/asm/delay.h
@@ -43,7 +43,7 @@
extern void __bad_udelay(void);
-#if defined(CONFIG_M68000) || defined(CONFIG_COLDFIRE)
+#ifdef CONFIG_CPU_HAS_NO_MULDIV64
/*
* The simpler m68k and ColdFire processors do not have a 32*32->64
* multiply instruction. So we need to handle them a little differently.
diff --git a/arch/m68k/include/asm/device.h b/arch/m68k/include/asm/device.h
deleted file mode 100644
index d8f9872..0000000
--- a/arch/m68k/include/asm/device.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/*
- * Arch specific extensions to struct device
- *
- * This file is released under the GPLv2
- */
-#include <asm-generic/device.h>
-
diff --git a/arch/m68k/include/asm/emergency-restart.h b/arch/m68k/include/asm/emergency-restart.h
deleted file mode 100644
index 108d8c4..0000000
--- a/arch/m68k/include/asm/emergency-restart.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_EMERGENCY_RESTART_H
-#define _ASM_EMERGENCY_RESTART_H
-
-#include <asm-generic/emergency-restart.h>
-
-#endif /* _ASM_EMERGENCY_RESTART_H */
diff --git a/arch/m68k/include/asm/errno.h b/arch/m68k/include/asm/errno.h
deleted file mode 100644
index 0d4e188..0000000
--- a/arch/m68k/include/asm/errno.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _M68K_ERRNO_H
-#define _M68K_ERRNO_H
-
-#include <asm-generic/errno.h>
-
-#endif /* _M68K_ERRNO_H */
diff --git a/arch/m68k/include/asm/futex.h b/arch/m68k/include/asm/futex.h
deleted file mode 100644
index 6a332a9..0000000
--- a/arch/m68k/include/asm/futex.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_FUTEX_H
-#define _ASM_FUTEX_H
-
-#include <asm-generic/futex.h>
-
-#endif
diff --git a/arch/m68k/include/asm/ioctl.h b/arch/m68k/include/asm/ioctl.h
deleted file mode 100644
index b279fe0..0000000
--- a/arch/m68k/include/asm/ioctl.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/ioctl.h>
diff --git a/arch/m68k/include/asm/ipcbuf.h b/arch/m68k/include/asm/ipcbuf.h
deleted file mode 100644
index 84c7e51..0000000
--- a/arch/m68k/include/asm/ipcbuf.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/ipcbuf.h>
diff --git a/arch/m68k/include/asm/irq_regs.h b/arch/m68k/include/asm/irq_regs.h
deleted file mode 100644
index 3dd9c0b..0000000
--- a/arch/m68k/include/asm/irq_regs.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/irq_regs.h>
diff --git a/arch/m68k/include/asm/kdebug.h b/arch/m68k/include/asm/kdebug.h
deleted file mode 100644
index 6ece1b0..0000000
--- a/arch/m68k/include/asm/kdebug.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/kdebug.h>
diff --git a/arch/m68k/include/asm/kmap_types.h b/arch/m68k/include/asm/kmap_types.h
deleted file mode 100644
index 3413cc1..0000000
--- a/arch/m68k/include/asm/kmap_types.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_M68K_KMAP_TYPES_H
-#define __ASM_M68K_KMAP_TYPES_H
-
-#include <asm-generic/kmap_types.h>
-
-#endif /* __ASM_M68K_KMAP_TYPES_H */
diff --git a/arch/m68k/include/asm/kvm_para.h b/arch/m68k/include/asm/kvm_para.h
deleted file mode 100644
index 14fab8f..0000000
--- a/arch/m68k/include/asm/kvm_para.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/kvm_para.h>
diff --git a/arch/m68k/include/asm/local.h b/arch/m68k/include/asm/local.h
deleted file mode 100644
index 6c25926..0000000
--- a/arch/m68k/include/asm/local.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_M68K_LOCAL_H
-#define _ASM_M68K_LOCAL_H
-
-#include <asm-generic/local.h>
-
-#endif /* _ASM_M68K_LOCAL_H */
diff --git a/arch/m68k/include/asm/local64.h b/arch/m68k/include/asm/local64.h
deleted file mode 100644
index 36c93b5..0000000
--- a/arch/m68k/include/asm/local64.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/local64.h>
diff --git a/arch/m68k/include/asm/mac_mouse.h b/arch/m68k/include/asm/mac_mouse.h
deleted file mode 100644
index 39a5c29..0000000
--- a/arch/m68k/include/asm/mac_mouse.h
+++ /dev/null
@@ -1,23 +0,0 @@
-#ifndef _ASM_MAC_MOUSE_H
-#define _ASM_MAC_MOUSE_H
-
-/*
- * linux/include/asm-m68k/mac_mouse.h
- * header file for Macintosh ADB mouse driver
- * 27-10-97 Michael Schmitz
- * copied from:
- * header file for Atari Mouse driver
- * by Robert de Vries (robert@and.nl) on 19Jul93
- */
-
-struct mouse_status {
- char buttons;
- short dx;
- short dy;
- int ready;
- int active;
- wait_queue_head_t wait;
- struct fasync_struct *fasyncptr;
-};
-
-#endif
diff --git a/arch/m68k/include/asm/mcfmbus.h b/arch/m68k/include/asm/mcfmbus.h
deleted file mode 100644
index 319899c..0000000
--- a/arch/m68k/include/asm/mcfmbus.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/****************************************************************************/
-
-/*
- * mcfmbus.h -- Coldfire MBUS support defines.
- *
- * (C) Copyright 1999, Martin Floeer (mfloeer@axcent.de)
- */
-
-/****************************************************************************/
-
-
-#ifndef mcfmbus_h
-#define mcfmbus_h
-
-
-#define MCFMBUS_BASE 0x280
-#define MCFMBUS_IRQ_VECTOR 0x19
-#define MCFMBUS_IRQ 0x1
-#define MCFMBUS_CLK 0x3f
-#define MCFMBUS_IRQ_LEVEL 0x07 /*IRQ Level 1*/
-#define MCFMBUS_ADDRESS 0x01
-
-
-/*
-* Define the 5307 MBUS register set addresses
-*/
-
-#define MCFMBUS_MADR 0x00
-#define MCFMBUS_MFDR 0x04
-#define MCFMBUS_MBCR 0x08
-#define MCFMBUS_MBSR 0x0C
-#define MCFMBUS_MBDR 0x10
-
-
-#define MCFMBUS_MADR_ADDR(a) (((a)&0x7F)<<0x01) /*Slave Address*/
-
-#define MCFMBUS_MFDR_MBC(a) ((a)&0x3F) /*M-Bus Clock*/
-
-/*
-* Define bit flags in Control Register
-*/
-
-#define MCFMBUS_MBCR_MEN (0x80) /* M-Bus Enable */
-#define MCFMBUS_MBCR_MIEN (0x40) /* M-Bus Interrupt Enable */
-#define MCFMBUS_MBCR_MSTA (0x20) /* Master/Slave Mode Select Bit */
-#define MCFMBUS_MBCR_MTX (0x10) /* Transmit/Rcv Mode Select Bit */
-#define MCFMBUS_MBCR_TXAK (0x08) /* Transmit Acknowledge Enable */
-#define MCFMBUS_MBCR_RSTA (0x04) /* Repeat Start */
-
-/*
-* Define bit flags in Status Register
-*/
-
-#define MCFMBUS_MBSR_MCF (0x80) /* Data Transfer Complete */
-#define MCFMBUS_MBSR_MAAS (0x40) /* Addressed as a Slave */
-#define MCFMBUS_MBSR_MBB (0x20) /* Bus Busy */
-#define MCFMBUS_MBSR_MAL (0x10) /* Arbitration Lost */
-#define MCFMBUS_MBSR_SRW (0x04) /* Slave Transmit */
-#define MCFMBUS_MBSR_MIF (0x02) /* M-Bus Interrupt */
-#define MCFMBUS_MBSR_RXAK (0x01) /* No Acknowledge Received */
-
-/*
-* Define bit flags in DATA I/O Register
-*/
-
-#define MCFMBUS_MBDR_READ (0x01) /* 1=read 0=write MBUS */
-
-#define MBUSIOCSCLOCK 1
-#define MBUSIOCGCLOCK 2
-#define MBUSIOCSADDR 3
-#define MBUSIOCGADDR 4
-#define MBUSIOCSSLADDR 5
-#define MBUSIOCGSLADDR 6
-#define MBUSIOCSSUBADDR 7
-#define MBUSIOCGSUBADDR 8
-
-#endif
diff --git a/arch/m68k/include/asm/mman.h b/arch/m68k/include/asm/mman.h
deleted file mode 100644
index 8eebf89..0000000
--- a/arch/m68k/include/asm/mman.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/mman.h>
diff --git a/arch/m68k/include/asm/mutex.h b/arch/m68k/include/asm/mutex.h
deleted file mode 100644
index 458c1f7..0000000
--- a/arch/m68k/include/asm/mutex.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * Pull in the generic implementation for the mutex fastpath.
- *
- * TODO: implement optimized primitives instead, or leave the generic
- * implementation in place, or pick the atomic_xchg() based generic
- * implementation. (see asm-generic/mutex-xchg.h for details)
- */
-
-#include <asm-generic/mutex-dec.h>
diff --git a/arch/m68k/include/asm/percpu.h b/arch/m68k/include/asm/percpu.h
deleted file mode 100644
index 0859d04..0000000
--- a/arch/m68k/include/asm/percpu.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_M68K_PERCPU_H
-#define __ASM_M68K_PERCPU_H
-
-#include <asm-generic/percpu.h>
-
-#endif /* __ASM_M68K_PERCPU_H */
diff --git a/arch/m68k/include/asm/resource.h b/arch/m68k/include/asm/resource.h
deleted file mode 100644
index e7d3501..0000000
--- a/arch/m68k/include/asm/resource.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _M68K_RESOURCE_H
-#define _M68K_RESOURCE_H
-
-#include <asm-generic/resource.h>
-
-#endif /* _M68K_RESOURCE_H */
diff --git a/arch/m68k/include/asm/sbus.h b/arch/m68k/include/asm/sbus.h
deleted file mode 100644
index bfe3ba1..0000000
--- a/arch/m68k/include/asm/sbus.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * some sbus structures and macros to make usage of sbus drivers possible
- */
-
-#ifndef __M68K_SBUS_H
-#define __M68K_SBUS_H
-
-struct sbus_dev {
- struct {
- unsigned int which_io;
- unsigned int phys_addr;
- } reg_addrs[1];
-};
-
-/* sbus IO functions stolen from include/asm-sparc/io.h for the serial driver */
-/* No SBUS on the Sun3, kludge -- sam */
-
-static inline void _sbus_writeb(unsigned char val, unsigned long addr)
-{
- *(volatile unsigned char *)addr = val;
-}
-
-static inline unsigned char _sbus_readb(unsigned long addr)
-{
- return *(volatile unsigned char *)addr;
-}
-
-static inline void _sbus_writel(unsigned long val, unsigned long addr)
-{
- *(volatile unsigned long *)addr = val;
-
-}
-
-extern inline unsigned long _sbus_readl(unsigned long addr)
-{
- return *(volatile unsigned long *)addr;
-}
-
-
-#define sbus_readb(a) _sbus_readb((unsigned long)a)
-#define sbus_writeb(v, a) _sbus_writeb(v, (unsigned long)a)
-#define sbus_readl(a) _sbus_readl((unsigned long)a)
-#define sbus_writel(v, a) _sbus_writel(v, (unsigned long)a)
-
-#endif
diff --git a/arch/m68k/include/asm/scatterlist.h b/arch/m68k/include/asm/scatterlist.h
deleted file mode 100644
index 3125054..0000000
--- a/arch/m68k/include/asm/scatterlist.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _M68K_SCATTERLIST_H
-#define _M68K_SCATTERLIST_H
-
-#include <asm-generic/scatterlist.h>
-
-#endif /* !(_M68K_SCATTERLIST_H) */
diff --git a/arch/m68k/include/asm/sections.h b/arch/m68k/include/asm/sections.h
deleted file mode 100644
index 5277e52..0000000
--- a/arch/m68k/include/asm/sections.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef _ASM_M68K_SECTIONS_H
-#define _ASM_M68K_SECTIONS_H
-
-#include <asm-generic/sections.h>
-
-extern char _sbss[], _ebss[];
-
-#endif /* _ASM_M68K_SECTIONS_H */
diff --git a/arch/m68k/include/asm/shm.h b/arch/m68k/include/asm/shm.h
deleted file mode 100644
index fa56ec8..0000000
--- a/arch/m68k/include/asm/shm.h
+++ /dev/null
@@ -1,31 +0,0 @@
-#ifndef _M68K_SHM_H
-#define _M68K_SHM_H
-
-
-/* format of page table entries that correspond to shared memory pages
- currently out in swap space (see also mm/swap.c):
- bits 0-1 (PAGE_PRESENT) is = 0
- bits 8..2 (SWP_TYPE) are = SHM_SWP_TYPE
- bits 31..9 are used like this:
- bits 15..9 (SHM_ID) the id of the shared memory segment
- bits 30..16 (SHM_IDX) the index of the page within the shared memory segment
- (actually only bits 25..16 get used since SHMMAX is so low)
- bit 31 (SHM_READ_ONLY) flag whether the page belongs to a read-only attach
-*/
-/* on the m68k both bits 0 and 1 must be zero */
-/* format on the sun3 is similar, but bits 30, 31 are set to zero and all
- others are reduced by 2. --m */
-
-#ifndef CONFIG_SUN3
-#define SHM_ID_SHIFT 9
-#else
-#define SHM_ID_SHIFT 7
-#endif
-#define _SHM_ID_BITS 7
-#define SHM_ID_MASK ((1<<_SHM_ID_BITS)-1)
-
-#define SHM_IDX_SHIFT (SHM_ID_SHIFT+_SHM_ID_BITS)
-#define _SHM_IDX_BITS 15
-#define SHM_IDX_MASK ((1<<_SHM_IDX_BITS)-1)
-
-#endif /* _M68K_SHM_H */
diff --git a/arch/m68k/include/asm/siginfo.h b/arch/m68k/include/asm/siginfo.h
deleted file mode 100644
index 851d3d7..0000000
--- a/arch/m68k/include/asm/siginfo.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _M68K_SIGINFO_H
-#define _M68K_SIGINFO_H
-
-#include <asm-generic/siginfo.h>
-
-#endif
diff --git a/arch/m68k/include/asm/statfs.h b/arch/m68k/include/asm/statfs.h
deleted file mode 100644
index 08d93f1..0000000
--- a/arch/m68k/include/asm/statfs.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _M68K_STATFS_H
-#define _M68K_STATFS_H
-
-#include <asm-generic/statfs.h>
-
-#endif /* _M68K_STATFS_H */
diff --git a/arch/m68k/include/asm/topology.h b/arch/m68k/include/asm/topology.h
deleted file mode 100644
index ca173e9..0000000
--- a/arch/m68k/include/asm/topology.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_M68K_TOPOLOGY_H
-#define _ASM_M68K_TOPOLOGY_H
-
-#include <asm-generic/topology.h>
-
-#endif /* _ASM_M68K_TOPOLOGY_H */
diff --git a/arch/m68k/include/asm/types.h b/arch/m68k/include/asm/types.h
deleted file mode 100644
index 89705ad..0000000
--- a/arch/m68k/include/asm/types.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef _M68K_TYPES_H
-#define _M68K_TYPES_H
-
-/*
- * This file is never included by application software unless
- * explicitly requested (e.g., via linux/types.h) in which case the
- * application is Linux specific so (user-) name space pollution is
- * not a major issue. However, for interoperability, libraries still
- * need to be careful to avoid a name clashes.
- */
-#include <asm-generic/int-ll64.h>
-
-/*
- * These aren't exported outside the kernel to avoid name space clashes
- */
-#ifdef __KERNEL__
-
-#define BITS_PER_LONG 32
-
-#endif /* __KERNEL__ */
-
-#endif /* _M68K_TYPES_H */
diff --git a/arch/m68k/include/asm/unaligned.h b/arch/m68k/include/asm/unaligned.h
index f4043ae..2b3ca0b 100644
--- a/arch/m68k/include/asm/unaligned.h
+++ b/arch/m68k/include/asm/unaligned.h
@@ -2,7 +2,7 @@
#define _ASM_M68K_UNALIGNED_H
-#if defined(CONFIG_COLDFIRE) || defined(CONFIG_M68000)
+#ifdef CONFIG_CPU_HAS_NO_UNALIGNED
#include <linux/unaligned/be_struct.h>
#include <linux/unaligned/le_byteshift.h>
#include <linux/unaligned/generic.h>
@@ -12,7 +12,7 @@
#else
/*
- * The m68k can do unaligned accesses itself.
+ * The m68k can do unaligned accesses itself.
*/
#include <linux/unaligned/access_ok.h>
#include <linux/unaligned/generic.h>
diff --git a/arch/m68k/include/asm/xor.h b/arch/m68k/include/asm/xor.h
deleted file mode 100644
index c82eb12..0000000
--- a/arch/m68k/include/asm/xor.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/xor.h>
diff --git a/arch/m68k/kernel/setup_no.c b/arch/m68k/kernel/setup_no.c
index 7dc186b..71fb299 100644
--- a/arch/m68k/kernel/setup_no.c
+++ b/arch/m68k/kernel/setup_no.c
@@ -218,13 +218,10 @@
printk(KERN_INFO "Motorola M5235EVB support (C)2005 Syn-tech Systems, Inc. (Jate Sujjavanich)\n");
#endif
- pr_debug("KERNEL -> TEXT=0x%06x-0x%06x DATA=0x%06x-0x%06x "
- "BSS=0x%06x-0x%06x\n", (int) &_stext, (int) &_etext,
- (int) &_sdata, (int) &_edata,
- (int) &_sbss, (int) &_ebss);
- pr_debug("MEMORY -> ROMFS=0x%06x-0x%06x MEM=0x%06x-0x%06x\n ",
- (int) &_ebss, (int) memory_start,
- (int) memory_start, (int) memory_end);
+ pr_debug("KERNEL -> TEXT=0x%p-0x%p DATA=0x%p-0x%p BSS=0x%p-0x%p\n",
+ _stext, _etext, _sdata, _edata, __bss_start, __bss_stop);
+ pr_debug("MEMORY -> ROMFS=0x%p-0x%06lx MEM=0x%06lx-0x%06lx\n ",
+ __bss_stop, memory_start, memory_start, memory_end);
/* Keep a copy of command line */
*cmdline_p = &command_line[0];
diff --git a/arch/m68k/kernel/sys_m68k.c b/arch/m68k/kernel/sys_m68k.c
index 8623f8d..9a5932e 100644
--- a/arch/m68k/kernel/sys_m68k.c
+++ b/arch/m68k/kernel/sys_m68k.c
@@ -479,9 +479,13 @@
goto bad_access;
}
- mem_value = *mem;
+ /*
+ * No need to check for EFAULT; we know that the page is
+ * present and writable.
+ */
+ __get_user(mem_value, mem);
if (mem_value == oldval)
- *mem = newval;
+ __put_user(newval, mem);
pte_unmap_unlock(pte, ptl);
up_read(&mm->mmap_sem);
diff --git a/arch/m68k/kernel/vmlinux-nommu.lds b/arch/m68k/kernel/vmlinux-nommu.lds
index 40e02d9..06a763f 100644
--- a/arch/m68k/kernel/vmlinux-nommu.lds
+++ b/arch/m68k/kernel/vmlinux-nommu.lds
@@ -78,9 +78,7 @@
__init_end = .;
}
- _sbss = .;
BSS_SECTION(0, 0, 0)
- _ebss = .;
_end = .;
diff --git a/arch/m68k/kernel/vmlinux-std.lds b/arch/m68k/kernel/vmlinux-std.lds
index 63407c8..d099359 100644
--- a/arch/m68k/kernel/vmlinux-std.lds
+++ b/arch/m68k/kernel/vmlinux-std.lds
@@ -31,9 +31,7 @@
RW_DATA_SECTION(16, PAGE_SIZE, THREAD_SIZE)
- _sbss = .;
BSS_SECTION(0, 0, 0)
- _ebss = .;
_edata = .; /* End of data section */
diff --git a/arch/m68k/kernel/vmlinux-sun3.lds b/arch/m68k/kernel/vmlinux-sun3.lds
index ad0f46d..8080469 100644
--- a/arch/m68k/kernel/vmlinux-sun3.lds
+++ b/arch/m68k/kernel/vmlinux-sun3.lds
@@ -44,9 +44,7 @@
. = ALIGN(PAGE_SIZE);
__init_end = .;
- _sbss = .;
BSS_SECTION(0, 0, 0)
- _ebss = .;
_end = . ;
diff --git a/arch/m68k/lib/muldi3.c b/arch/m68k/lib/muldi3.c
index 79e928a..ee5f0b1 100644
--- a/arch/m68k/lib/muldi3.c
+++ b/arch/m68k/lib/muldi3.c
@@ -19,7 +19,7 @@
the Free Software Foundation, 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA. */
-#if defined(CONFIG_M68000) || defined(CONFIG_COLDFIRE)
+#ifdef CONFIG_CPU_HAS_NO_MULDIV64
#define SI_TYPE_SIZE 32
#define __BITS4 (SI_TYPE_SIZE / 4)
diff --git a/arch/m68k/mm/init_mm.c b/arch/m68k/mm/init_mm.c
index f77f258..282f9de 100644
--- a/arch/m68k/mm/init_mm.c
+++ b/arch/m68k/mm/init_mm.c
@@ -104,7 +104,7 @@
MLK_ROUNDUP(__init_begin, __init_end),
MLK_ROUNDUP(_stext, _etext),
MLK_ROUNDUP(_sdata, _edata),
- MLK_ROUNDUP(_sbss, _ebss));
+ MLK_ROUNDUP(__bss_start, __bss_stop));
}
void __init mem_init(void)
diff --git a/arch/m68k/mm/init_no.c b/arch/m68k/mm/init_no.c
index 345ec0d..688e366 100644
--- a/arch/m68k/mm/init_no.c
+++ b/arch/m68k/mm/init_no.c
@@ -91,7 +91,7 @@
totalram_pages = free_all_bootmem();
codek = (_etext - _stext) >> 10;
- datak = (_ebss - _sdata) >> 10;
+ datak = (__bss_stop - _sdata) >> 10;
initk = (__init_begin - __init_end) >> 10;
tmp = nr_free_pages() << PAGE_SHIFT;
diff --git a/arch/m68k/platform/68328/head-de2.S b/arch/m68k/platform/68328/head-de2.S
index f632fdc..537d324 100644
--- a/arch/m68k/platform/68328/head-de2.S
+++ b/arch/m68k/platform/68328/head-de2.S
@@ -60,8 +60,8 @@
* Move ROM filesystem above bss :-)
*/
- moveal #_sbss, %a0 /* romfs at the start of bss */
- moveal #_ebss, %a1 /* Set up destination */
+ moveal #__bss_start, %a0 /* romfs at the start of bss */
+ moveal #__bss_stop, %a1 /* Set up destination */
movel %a0, %a2 /* Copy of bss start */
movel 8(%a0), %d1 /* Get size of ROMFS */
@@ -84,8 +84,8 @@
* Initialize BSS segment to 0
*/
- lea _sbss, %a0
- lea _ebss, %a1
+ lea __bss_start, %a0
+ lea __bss_stop, %a1
/* Copy 0 to %a0 until %a0 == %a1 */
2: cmpal %a0, %a1
diff --git a/arch/m68k/platform/68328/head-pilot.S b/arch/m68k/platform/68328/head-pilot.S
index 2ebfd64..45a9dad 100644
--- a/arch/m68k/platform/68328/head-pilot.S
+++ b/arch/m68k/platform/68328/head-pilot.S
@@ -110,7 +110,7 @@
movel #CONFIG_VECTORBASE, %d7
addl #16, %d7
moveal %d7, %a0
- moveal #_ebss, %a1
+ moveal #__bss_stop, %a1
lea %a1@(512), %a2
DBG_PUTC('C')
@@ -138,8 +138,8 @@
DBG_PUTC('E')
- moveal #_sbss, %a0
- moveal #_ebss, %a1
+ moveal #__bss_start, %a0
+ moveal #__bss_stop, %a1
/* Copy 0 to %a0 until %a0 == %a1 */
L1:
@@ -150,7 +150,7 @@
DBG_PUTC('F')
/* Copy command line from end of bss to command line */
- moveal #_ebss, %a0
+ moveal #__bss_stop, %a0
moveal #command_line, %a1
lea %a1@(512), %a2
@@ -165,7 +165,7 @@
movel #_sdata, %d0
movel %d0, _rambase
- movel #_ebss, %d0
+ movel #__bss_stop, %d0
movel %d0, _ramstart
movel %a4, %d0
diff --git a/arch/m68k/platform/68328/head-ram.S b/arch/m68k/platform/68328/head-ram.S
index 7f1aeea..5189ef9 100644
--- a/arch/m68k/platform/68328/head-ram.S
+++ b/arch/m68k/platform/68328/head-ram.S
@@ -76,8 +76,8 @@
beq pclp3
#endif /* DEBUG */
moveal #0x007ffff0, %ssp
- moveal #_sbss, %a0
- moveal #_ebss, %a1
+ moveal #__bss_start, %a0
+ moveal #__bss_stop, %a1
/* Copy 0 to %a0 until %a0 >= %a1 */
L1:
diff --git a/arch/m68k/platform/68328/head-rom.S b/arch/m68k/platform/68328/head-rom.S
index a5ff96d..3dff98b 100644
--- a/arch/m68k/platform/68328/head-rom.S
+++ b/arch/m68k/platform/68328/head-rom.S
@@ -59,8 +59,8 @@
cmpal %a1, %a2
bhi 1b
- moveal #_sbss, %a0
- moveal #_ebss, %a1
+ moveal #__bss_start, %a0
+ moveal #__bss_stop, %a1
/* Copy 0 to %a0 until %a0 == %a1 */
1:
@@ -70,7 +70,7 @@
movel #_sdata, %d0
movel %d0, _rambase
- movel #_ebss, %d0
+ movel #__bss_stop, %d0
movel %d0, _ramstart
movel #RAMEND-CONFIG_MEMORY_RESERVE*0x100000, %d0
movel %d0, _ramend
diff --git a/arch/m68k/platform/68360/head-ram.S b/arch/m68k/platform/68360/head-ram.S
index 8eb94fb..acd2131 100644
--- a/arch/m68k/platform/68360/head-ram.S
+++ b/arch/m68k/platform/68360/head-ram.S
@@ -219,8 +219,8 @@
cmp.l #_edata, %a1
blt LD1
- moveal #_sbss, %a0
- moveal #_ebss, %a1
+ moveal #__bss_start, %a0
+ moveal #__bss_stop, %a1
/* Copy 0 to %a0 until %a0 == %a1 */
L1:
@@ -234,7 +234,7 @@
store_ram_size:
/* Set ram size information */
move.l #_sdata, _rambase
- move.l #_ebss, _ramstart
+ move.l #__bss_stop, _ramstart
move.l #RAMEND, %d0
sub.l #0x1000, %d0 /* Reserve 4K for stack space.*/
move.l %d0, _ramend /* Different from RAMEND.*/
diff --git a/arch/m68k/platform/68360/head-rom.S b/arch/m68k/platform/68360/head-rom.S
index 97510e5..dfc756d 100644
--- a/arch/m68k/platform/68360/head-rom.S
+++ b/arch/m68k/platform/68360/head-rom.S
@@ -13,7 +13,7 @@
*/
.global _stext
-.global _sbss
+.global __bss_start
.global _start
.global _rambase
@@ -229,8 +229,8 @@
cmp.l #_edata, %a1
blt LD1
- moveal #_sbss, %a0
- moveal #_ebss, %a1
+ moveal #__bss_start, %a0
+ moveal #__bss_stop, %a1
/* Copy 0 to %a0 until %a0 == %a1 */
L1:
@@ -244,7 +244,7 @@
store_ram_size:
/* Set ram size information */
move.l #_sdata, _rambase
- move.l #_ebss, _ramstart
+ move.l #__bss_stop, _ramstart
move.l #RAMEND, %d0
sub.l #0x1000, %d0 /* Reserve 4K for stack space.*/
move.l %d0, _ramend /* Different from RAMEND.*/
diff --git a/arch/m68k/platform/coldfire/head.S b/arch/m68k/platform/coldfire/head.S
index 4e0c9eb..b88f571 100644
--- a/arch/m68k/platform/coldfire/head.S
+++ b/arch/m68k/platform/coldfire/head.S
@@ -230,8 +230,8 @@
/*
* Move ROM filesystem above bss :-)
*/
- lea _sbss,%a0 /* get start of bss */
- lea _ebss,%a1 /* set up destination */
+ lea __bss_start,%a0 /* get start of bss */
+ lea __bss_stop,%a1 /* set up destination */
movel %a0,%a2 /* copy of bss start */
movel 8(%a0),%d0 /* get size of ROMFS */
@@ -249,7 +249,7 @@
bne _copy_romfs
#else /* CONFIG_ROMFS_FS */
- lea _ebss,%a1
+ lea __bss_stop,%a1
movel %a1,_ramstart
#endif /* CONFIG_ROMFS_FS */
@@ -257,8 +257,8 @@
/*
* Zero out the bss region.
*/
- lea _sbss,%a0 /* get start of bss */
- lea _ebss,%a1 /* get end of bss */
+ lea __bss_start,%a0 /* get start of bss */
+ lea __bss_stop,%a1 /* get end of bss */
clrl %d0 /* set value */
_clear_bss:
movel %d0,(%a0)+ /* clear each word */
diff --git a/arch/m68k/sun3/prom/init.c b/arch/m68k/sun3/prom/init.c
index d8e6349..eeba067 100644
--- a/arch/m68k/sun3/prom/init.c
+++ b/arch/m68k/sun3/prom/init.c
@@ -22,57 +22,13 @@
struct linux_nodeops *prom_nodeops;
/* You must call prom_init() before you attempt to use any of the
- * routines in the prom library. It returns 0 on success, 1 on
- * failure. It gets passed the pointer to the PROM vector.
+ * routines in the prom library.
+ * It gets passed the pointer to the PROM vector.
*/
-extern void prom_meminit(void);
-extern void prom_ranges_init(void);
-
void __init prom_init(struct linux_romvec *rp)
{
romvec = rp;
-#ifndef CONFIG_SUN3
- switch(romvec->pv_romvers) {
- case 0:
- prom_vers = PROM_V0;
- break;
- case 2:
- prom_vers = PROM_V2;
- break;
- case 3:
- prom_vers = PROM_V3;
- break;
- case 4:
- prom_vers = PROM_P1275;
- prom_printf("PROMLIB: Sun IEEE Prom not supported yet\n");
- prom_halt();
- break;
- default:
- prom_printf("PROMLIB: Bad PROM version %d\n",
- romvec->pv_romvers);
- prom_halt();
- break;
- };
-
- prom_rev = romvec->pv_plugin_revision;
- prom_prev = romvec->pv_printrev;
- prom_nodeops = romvec->pv_nodeops;
-
- prom_root_node = prom_getsibling(0);
- if((prom_root_node == 0) || (prom_root_node == -1))
- prom_halt();
-
- if((((unsigned long) prom_nodeops) == 0) ||
- (((unsigned long) prom_nodeops) == -1))
- prom_halt();
-
- prom_meminit();
-
- prom_ranges_init();
-#endif
-// printk("PROMLIB: Sun Boot Prom Version %d Revision %d\n",
-// romvec->pv_romvers, prom_rev);
/* Initialization successful. */
return;
diff --git a/arch/microblaze/include/asm/sections.h b/arch/microblaze/include/asm/sections.h
index 4487e15..c07ed5d 100644
--- a/arch/microblaze/include/asm/sections.h
+++ b/arch/microblaze/include/asm/sections.h
@@ -18,10 +18,6 @@
extern unsigned long __ivt_start[], __ivt_end[];
extern char _etext[], _stext[];
-# ifdef CONFIG_MTD_UCLINUX
-extern char *_ebss;
-# endif
-
extern u32 _fdt_start[], _fdt_end[];
# endif /* !__ASSEMBLY__ */
diff --git a/arch/microblaze/kernel/microblaze_ksyms.c b/arch/microblaze/kernel/microblaze_ksyms.c
index bb4907c..2b25bcf 100644
--- a/arch/microblaze/kernel/microblaze_ksyms.c
+++ b/arch/microblaze/kernel/microblaze_ksyms.c
@@ -21,9 +21,6 @@
#include <linux/ftrace.h>
#include <linux/uaccess.h>
-extern char *_ebss;
-EXPORT_SYMBOL_GPL(_ebss);
-
#ifdef CONFIG_FUNCTION_TRACER
extern void _mcount(void);
EXPORT_SYMBOL(_mcount);
diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c
index 16d8dfd..4da971d 100644
--- a/arch/microblaze/kernel/setup.c
+++ b/arch/microblaze/kernel/setup.c
@@ -121,7 +121,7 @@
/* Move ROMFS out of BSS before clearing it */
if (romfs_size > 0) {
- memmove(&_ebss, (int *)romfs_base, romfs_size);
+ memmove(&__bss_stop, (int *)romfs_base, romfs_size);
klimit += romfs_size;
}
#endif
@@ -165,7 +165,7 @@
BUG_ON(romfs_size < 0); /* What else can we do? */
printk("Moved 0x%08x bytes from 0x%08x to 0x%08x\n",
- romfs_size, romfs_base, (unsigned)&_ebss);
+ romfs_size, romfs_base, (unsigned)&__bss_stop);
printk("New klimit: 0x%08x\n", (unsigned)klimit);
#endif
diff --git a/arch/microblaze/kernel/vmlinux.lds.S b/arch/microblaze/kernel/vmlinux.lds.S
index 109e9d8..936d01a 100644
--- a/arch/microblaze/kernel/vmlinux.lds.S
+++ b/arch/microblaze/kernel/vmlinux.lds.S
@@ -131,7 +131,6 @@
*(COMMON)
. = ALIGN (4) ;
__bss_stop = . ;
- _ebss = . ;
}
. = ALIGN(PAGE_SIZE);
_end = .;
diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
index 7048c03..fb58057 100644
--- a/arch/sh/boards/Kconfig
+++ b/arch/sh/boards/Kconfig
@@ -57,6 +57,7 @@
depends on CPU_SUBTYPE_SH7724
select ARCH_REQUIRE_GPIOLIB
select SND_SOC_AK4642 if SND_SIMPLE_CARD
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
help
Select 7724 SolutionEngine if configuring for a Hitachi SH7724
evaluation board.
@@ -140,6 +141,7 @@
bool "Renesas Starter Kit"
depends on CPU_SUBTYPE_SH7201 || CPU_SUBTYPE_SH7203 || \
CPU_SUBTYPE_SH7264 || CPU_SUBTYPE_SH7269
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
help
Select this option if configuring for any of the RSK+ MCU
evaluation platforms.
@@ -159,6 +161,7 @@
select NO_IOPORT if !PCI
select ARCH_WANT_OPTIONAL_GPIOLIB
select HAVE_SRAM_POOL
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
help
Select SDK7786 if configuring for a Renesas Technology Europe
SH7786-65nm board.
@@ -173,6 +176,7 @@
bool "SH7757LCR"
depends on CPU_SUBTYPE_SH7757
select ARCH_REQUIRE_GPIOLIB
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
config SH_SH7785LCR
bool "SH7785LCR"
@@ -206,6 +210,7 @@
bool "Migo-R"
depends on CPU_SUBTYPE_SH7722
select ARCH_REQUIRE_GPIOLIB
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
help
Select Migo-R if configuring for the SH7722 Migo-R platform
by Renesas System Solutions Asia Pte. Ltd.
@@ -214,6 +219,7 @@
bool "AP-325RXA"
depends on CPU_SUBTYPE_SH7723
select ARCH_REQUIRE_GPIOLIB
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
help
Renesas "AP-325RXA" support.
Compatible with ALGO SYSTEM CO.,LTD. "AP-320A"
@@ -222,6 +228,7 @@
bool "KFR2R09"
depends on CPU_SUBTYPE_SH7724
select ARCH_REQUIRE_GPIOLIB
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
help
"Kit For R2R for 2009" support.
@@ -230,6 +237,7 @@
depends on CPU_SUBTYPE_SH7724
select ARCH_REQUIRE_GPIOLIB
select SND_SOC_DA7210 if SND_SIMPLE_CARD
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
help
Renesas "R0P7724LC0011/21RL (EcoVec)" support.
@@ -305,6 +313,7 @@
bool "Magic Panel R2"
depends on CPU_SUBTYPE_SH7720
select ARCH_REQUIRE_GPIOLIB
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
help
Select Magic Panel R2 if configuring for Magic Panel R2.
@@ -316,6 +325,7 @@
config SH_POLARIS
bool "SMSC Polaris"
select CPU_HAS_IPR_IRQ
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
depends on CPU_SUBTYPE_SH7709
help
Select if configuring for an SMSC Polaris development board
@@ -323,6 +333,7 @@
config SH_SH2007
bool "SH-2007 board"
select NO_IOPORT
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
depends on CPU_SUBTYPE_SH7780
help
SH-2007 is a single-board computer based around SH7780 chip
@@ -334,6 +345,7 @@
config SH_APSH4A3A
bool "AP-SH4A-3A"
select SH_ALPHA_BOARD
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
depends on CPU_SUBTYPE_SH7785
help
Select AP-SH4A-3A if configuring for an ALPHAPROJECT AP-SH4A-3A.
@@ -342,6 +354,7 @@
bool "AP-SH4AD-0A"
select SH_ALPHA_BOARD
select SYS_SUPPORTS_PCI
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
depends on CPU_SUBTYPE_SH7786
help
Select AP-SH4AD-0A if configuring for an ALPHAPROJECT AP-SH4AD-0A.
diff --git a/arch/sh/boards/board-apsh4a3a.c b/arch/sh/boards/board-apsh4a3a.c
index 2823619..0a39c24 100644
--- a/arch/sh/boards/board-apsh4a3a.c
+++ b/arch/sh/boards/board-apsh4a3a.c
@@ -13,6 +13,8 @@
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/mtd/physmap.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
#include <linux/smsc911x.h>
#include <linux/irq.h>
#include <linux/clk.h>
@@ -66,6 +68,12 @@
.resource = nor_flash_resources,
};
+/* Dummy supplies, where voltage doesn't matter */
+static struct regulator_consumer_supply dummy_supplies[] = {
+ REGULATOR_SUPPLY("vddvario", "smsc911x"),
+ REGULATOR_SUPPLY("vdd33a", "smsc911x"),
+};
+
static struct resource smsc911x_resources[] = {
[0] = {
.name = "smsc911x-memory",
@@ -105,6 +113,8 @@
static int __init apsh4a3a_devices_setup(void)
{
+ regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+
return platform_add_devices(apsh4a3a_devices,
ARRAY_SIZE(apsh4a3a_devices));
}
diff --git a/arch/sh/boards/board-apsh4ad0a.c b/arch/sh/boards/board-apsh4ad0a.c
index b4d6292a..92eac3a 100644
--- a/arch/sh/boards/board-apsh4ad0a.c
+++ b/arch/sh/boards/board-apsh4ad0a.c
@@ -12,12 +12,20 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
#include <linux/smsc911x.h>
#include <linux/irq.h>
#include <linux/clk.h>
#include <asm/machvec.h>
#include <asm/sizes.h>
+/* Dummy supplies, where voltage doesn't matter */
+static struct regulator_consumer_supply dummy_supplies[] = {
+ REGULATOR_SUPPLY("vddvario", "smsc911x"),
+ REGULATOR_SUPPLY("vdd33a", "smsc911x"),
+};
+
static struct resource smsc911x_resources[] = {
[0] = {
.name = "smsc911x-memory",
@@ -56,6 +64,8 @@
static int __init apsh4ad0a_devices_setup(void)
{
+ regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+
return platform_add_devices(apsh4ad0a_devices,
ARRAY_SIZE(apsh4ad0a_devices));
}
diff --git a/arch/sh/boards/board-magicpanelr2.c b/arch/sh/boards/board-magicpanelr2.c
index 90568f9..2050085 100644
--- a/arch/sh/boards/board-magicpanelr2.c
+++ b/arch/sh/boards/board-magicpanelr2.c
@@ -14,6 +14,8 @@
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/gpio.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
#include <linux/smsc911x.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
@@ -24,6 +26,12 @@
#include <asm/heartbeat.h>
#include <cpu/sh7720.h>
+/* Dummy supplies, where voltage doesn't matter */
+static struct regulator_consumer_supply dummy_supplies[] = {
+ REGULATOR_SUPPLY("vddvario", "smsc911x"),
+ REGULATOR_SUPPLY("vdd33a", "smsc911x"),
+};
+
#define LAN9115_READY (__raw_readl(0xA8000084UL) & 0x00000001UL)
/* Wait until reset finished. Timeout is 100ms. */
@@ -348,6 +356,8 @@
static int __init mpr2_devices_setup(void)
{
+ regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+
return platform_add_devices(mpr2_devices, ARRAY_SIZE(mpr2_devices));
}
device_initcall(mpr2_devices_setup);
diff --git a/arch/sh/boards/board-polaris.c b/arch/sh/boards/board-polaris.c
index 0978ae2..37a08d0 100644
--- a/arch/sh/boards/board-polaris.c
+++ b/arch/sh/boards/board-polaris.c
@@ -9,6 +9,8 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/platform_device.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
#include <linux/smsc911x.h>
#include <linux/io.h>
#include <asm/irq.h>
@@ -22,6 +24,12 @@
#define AREA5_WAIT_CTRL (0x1C00)
#define WAIT_STATES_10 (0x7)
+/* Dummy supplies, where voltage doesn't matter */
+static struct regulator_consumer_supply dummy_supplies[] = {
+ REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
+ REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
+};
+
static struct resource smsc911x_resources[] = {
[0] = {
.name = "smsc911x-memory",
@@ -88,6 +96,8 @@
printk(KERN_INFO "Configuring Polaris external bus\n");
+ regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+
/* Configure area 5 with 2 wait states */
wcr = __raw_readw(WCR2);
wcr &= (~AREA5_WAIT_CTRL);
diff --git a/arch/sh/boards/board-sh2007.c b/arch/sh/boards/board-sh2007.c
index b90b78f..1980bb7 100644
--- a/arch/sh/boards/board-sh2007.c
+++ b/arch/sh/boards/board-sh2007.c
@@ -6,6 +6,8 @@
*/
#include <linux/init.h>
#include <linux/irq.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
#include <linux/smsc911x.h>
#include <linux/platform_device.h>
#include <linux/ata_platform.h>
@@ -13,6 +15,14 @@
#include <asm/machvec.h>
#include <mach/sh2007.h>
+/* Dummy supplies, where voltage doesn't matter */
+static struct regulator_consumer_supply dummy_supplies[] = {
+ REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
+ REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
+ REGULATOR_SUPPLY("vddvario", "smsc911x.1"),
+ REGULATOR_SUPPLY("vdd33a", "smsc911x.1"),
+};
+
struct smsc911x_platform_config smc911x_info = {
.flags = SMSC911X_USE_32BIT,
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
@@ -98,6 +108,8 @@
static int __init sh2007_io_init(void)
{
+ regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+
platform_add_devices(sh2007_devices, ARRAY_SIZE(sh2007_devices));
return 0;
}
diff --git a/arch/sh/boards/board-sh7757lcr.c b/arch/sh/boards/board-sh7757lcr.c
index 5087f8b..41f8670 100644
--- a/arch/sh/boards/board-sh7757lcr.c
+++ b/arch/sh/boards/board-sh7757lcr.c
@@ -12,6 +12,8 @@
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/irq.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <linux/io.h>
@@ -199,6 +201,15 @@
},
};
+/* Fixed 3.3V regulator to be used by SDHI0, MMCIF */
+static struct regulator_consumer_supply fixed3v3_power_consumers[] =
+{
+ REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
+ REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
+ REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"),
+ REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"),
+};
+
/* SH_MMCIF */
static struct resource sh_mmcif_resources[] = {
[0] = {
@@ -329,6 +340,9 @@
static int __init sh7757lcr_devices_setup(void)
{
+ regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
+ ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
+
/* RGMII (PTA) */
gpio_request(GPIO_FN_ET0_MDC, NULL);
gpio_request(GPIO_FN_ET0_MDIO, NULL);
diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c
index f33ebf4..9e963c1 100644
--- a/arch/sh/boards/mach-ap325rxa/setup.c
+++ b/arch/sh/boards/mach-ap325rxa/setup.c
@@ -20,6 +20,8 @@
#include <linux/mtd/sh_flctl.h>
#include <linux/delay.h>
#include <linux/i2c.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
#include <linux/smsc911x.h>
#include <linux/gpio.h>
#include <linux/videodev2.h>
@@ -34,6 +36,12 @@
#include <asm/suspend.h>
#include <cpu/sh7723.h>
+/* Dummy supplies, where voltage doesn't matter */
+static struct regulator_consumer_supply dummy_supplies[] = {
+ REGULATOR_SUPPLY("vddvario", "smsc911x"),
+ REGULATOR_SUPPLY("vdd33a", "smsc911x"),
+};
+
static struct smsc911x_platform_config smsc911x_config = {
.phy_interface = PHY_INTERFACE_MODE_MII,
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
@@ -423,6 +431,15 @@
},
};
+/* Fixed 3.3V regulators to be used by SDHI0, SDHI1 */
+static struct regulator_consumer_supply fixed3v3_power_consumers[] =
+{
+ REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
+ REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
+ REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
+ REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"),
+};
+
static struct resource sdhi0_cn3_resources[] = {
[0] = {
.name = "SDHI0",
@@ -544,6 +561,10 @@
&ap325rxa_sdram_leave_start,
&ap325rxa_sdram_leave_end);
+ regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
+ ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
+ regulator_register_fixed(1, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+
/* LD3 and LD4 LEDs */
gpio_request(GPIO_PTX5, NULL); /* RUN */
gpio_direction_output(GPIO_PTX5, 1);
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 4158d70..64559e8a 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -19,6 +19,8 @@
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/delay.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
#include <linux/usb/r8a66597.h>
#include <linux/usb/renesas_usbhs.h>
#include <linux/i2c.h>
@@ -242,9 +244,17 @@
return gpio_get_value(GPIO_PTB3);
}
+static void usbhs_phy_reset(struct platform_device *pdev)
+{
+ /* enable vbus if HOST */
+ if (!gpio_get_value(GPIO_PTB3))
+ gpio_set_value(GPIO_PTB5, 1);
+}
+
static struct renesas_usbhs_platform_info usbhs_info = {
.platform_callback = {
.get_id = usbhs_get_id,
+ .phy_reset = usbhs_phy_reset,
},
.driver_param = {
.buswait_bwait = 4,
@@ -518,10 +528,86 @@
.irq = IRQ0,
};
+static struct regulator_consumer_supply cn12_power_consumers[] =
+{
+ REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"),
+ REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"),
+ REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
+ REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"),
+};
+
+static struct regulator_init_data cn12_power_init_data = {
+ .constraints = {
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(cn12_power_consumers),
+ .consumer_supplies = cn12_power_consumers,
+};
+
+static struct fixed_voltage_config cn12_power_info = {
+ .supply_name = "CN12 SD/MMC Vdd",
+ .microvolts = 3300000,
+ .gpio = GPIO_PTB7,
+ .enable_high = 1,
+ .init_data = &cn12_power_init_data,
+};
+
+static struct platform_device cn12_power = {
+ .name = "reg-fixed-voltage",
+ .id = 0,
+ .dev = {
+ .platform_data = &cn12_power_info,
+ },
+};
+
#if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE)
/* SDHI0 */
+static struct regulator_consumer_supply sdhi0_power_consumers[] =
+{
+ REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
+ REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
+};
+
+static struct regulator_init_data sdhi0_power_init_data = {
+ .constraints = {
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(sdhi0_power_consumers),
+ .consumer_supplies = sdhi0_power_consumers,
+};
+
+static struct fixed_voltage_config sdhi0_power_info = {
+ .supply_name = "CN11 SD/MMC Vdd",
+ .microvolts = 3300000,
+ .gpio = GPIO_PTB6,
+ .enable_high = 1,
+ .init_data = &sdhi0_power_init_data,
+};
+
+static struct platform_device sdhi0_power = {
+ .name = "reg-fixed-voltage",
+ .id = 1,
+ .dev = {
+ .platform_data = &sdhi0_power_info,
+ },
+};
+
static void sdhi0_set_pwr(struct platform_device *pdev, int state)
{
+ static int power_gpio = -EINVAL;
+
+ if (power_gpio < 0) {
+ int ret = gpio_request(GPIO_PTB6, NULL);
+ if (!ret) {
+ power_gpio = GPIO_PTB6;
+ gpio_direction_output(power_gpio, 0);
+ }
+ }
+
+ /*
+ * Toggle the GPIO regardless, whether we managed to grab it above or
+ * the fixed regulator driver did.
+ */
gpio_set_value(GPIO_PTB6, state);
}
@@ -562,13 +648,27 @@
},
};
-#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
-/* SDHI1 */
-static void sdhi1_set_pwr(struct platform_device *pdev, int state)
+static void cn12_set_pwr(struct platform_device *pdev, int state)
{
+ static int power_gpio = -EINVAL;
+
+ if (power_gpio < 0) {
+ int ret = gpio_request(GPIO_PTB7, NULL);
+ if (!ret) {
+ power_gpio = GPIO_PTB7;
+ gpio_direction_output(power_gpio, 0);
+ }
+ }
+
+ /*
+ * Toggle the GPIO regardless, whether we managed to grab it above or
+ * the fixed regulator driver did.
+ */
gpio_set_value(GPIO_PTB7, state);
}
+#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
+/* SDHI1 */
static int sdhi1_get_cd(struct platform_device *pdev)
{
return !gpio_get_value(GPIO_PTW7);
@@ -579,7 +679,7 @@
.dma_slave_rx = SHDMA_SLAVE_SDHI1_RX,
.tmio_caps = MMC_CAP_SDIO_IRQ | MMC_CAP_POWER_OFF_CARD |
MMC_CAP_NEEDS_POLL,
- .set_pwr = sdhi1_set_pwr,
+ .set_pwr = cn12_set_pwr,
.get_cd = sdhi1_get_cd,
};
@@ -899,14 +999,9 @@
#if defined(CONFIG_MMC_SH_MMCIF) || defined(CONFIG_MMC_SH_MMCIF_MODULE)
/* SH_MMCIF */
-static void mmcif_set_pwr(struct platform_device *pdev, int state)
-{
- gpio_set_value(GPIO_PTB7, state);
-}
-
static void mmcif_down_pwr(struct platform_device *pdev)
{
- gpio_set_value(GPIO_PTB7, 0);
+ cn12_set_pwr(pdev, 0);
}
static struct resource sh_mmcif_resources[] = {
@@ -929,7 +1024,7 @@
};
static struct sh_mmcif_plat_data sh_mmcif_plat = {
- .set_pwr = mmcif_set_pwr,
+ .set_pwr = cn12_set_pwr,
.down_pwr = mmcif_down_pwr,
.sup_pclk = 0, /* SH7724: Max Pclk/2 */
.caps = MMC_CAP_4_BIT_DATA |
@@ -960,7 +1055,9 @@
&ceu0_device,
&ceu1_device,
&keysc_device,
+ &cn12_power,
#if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE)
+ &sdhi0_power,
&sdhi0_device,
#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
&sdhi1_device,
@@ -1258,8 +1355,6 @@
gpio_request(GPIO_FN_SDHI0D2, NULL);
gpio_request(GPIO_FN_SDHI0D1, NULL);
gpio_request(GPIO_FN_SDHI0D0, NULL);
- gpio_request(GPIO_PTB6, NULL);
- gpio_direction_output(GPIO_PTB6, 0);
#else
/* enable MSIOF0 on CN11 (needs DS2.4 set to OFF) */
gpio_request(GPIO_FN_MSIOF0_TXD, NULL);
@@ -1288,8 +1383,6 @@
gpio_request(GPIO_FN_MMC_D0, NULL);
gpio_request(GPIO_FN_MMC_CLK, NULL);
gpio_request(GPIO_FN_MMC_CMD, NULL);
- gpio_request(GPIO_PTB7, NULL);
- gpio_direction_output(GPIO_PTB7, 0);
cn12_enabled = true;
#elif defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE)
@@ -1301,8 +1394,6 @@
gpio_request(GPIO_FN_SDHI1D2, NULL);
gpio_request(GPIO_FN_SDHI1D1, NULL);
gpio_request(GPIO_FN_SDHI1D0, NULL);
- gpio_request(GPIO_PTB7, NULL);
- gpio_direction_output(GPIO_PTB7, 0);
/* Card-detect, used on CN12 with SDHI1 */
gpio_request(GPIO_PTW7, NULL);
diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c
index 43a179c..f2a4304 100644
--- a/arch/sh/boards/mach-kfr2r09/setup.c
+++ b/arch/sh/boards/mach-kfr2r09/setup.c
@@ -21,6 +21,8 @@
#include <linux/input.h>
#include <linux/input/sh_keysc.h>
#include <linux/i2c.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
#include <linux/usb/r8a66597.h>
#include <linux/videodev2.h>
#include <linux/sh_intc.h>
@@ -341,6 +343,13 @@
},
};
+/* Fixed 3.3V regulator to be used by SDHI0 */
+static struct regulator_consumer_supply fixed3v3_power_consumers[] =
+{
+ REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
+ REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
+};
+
static struct resource kfr2r09_sh_sdhi0_resources[] = {
[0] = {
.name = "SDHI0",
@@ -523,6 +532,9 @@
&kfr2r09_sdram_leave_start,
&kfr2r09_sdram_leave_end);
+ regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
+ ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
+
/* enable SCIF1 serial port for YC401 console support */
gpio_request(GPIO_FN_SCIF1_RXD, NULL);
gpio_request(GPIO_FN_SCIF1_TXD, NULL);
diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
index a8a1ca7..8b73194 100644
--- a/arch/sh/boards/mach-migor/setup.c
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -17,6 +17,8 @@
#include <linux/mtd/physmap.h>
#include <linux/mtd/nand.h>
#include <linux/i2c.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
#include <linux/smc91x.h>
#include <linux/delay.h>
#include <linux/clk.h>
@@ -386,6 +388,13 @@
},
};
+/* Fixed 3.3V regulator to be used by SDHI0 */
+static struct regulator_consumer_supply fixed3v3_power_consumers[] =
+{
+ REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
+ REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
+};
+
static struct resource sdhi_cn9_resources[] = {
[0] = {
.name = "SDHI",
@@ -498,6 +507,10 @@
&migor_sdram_enter_end,
&migor_sdram_leave_start,
&migor_sdram_leave_end);
+
+ regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
+ ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
+
/* Let D11 LED show STATUS0 */
gpio_request(GPIO_FN_STATUS0, NULL);
diff --git a/arch/sh/boards/mach-rsk/setup.c b/arch/sh/boards/mach-rsk/setup.c
index 895f030..2685ea0 100644
--- a/arch/sh/boards/mach-rsk/setup.c
+++ b/arch/sh/boards/mach-rsk/setup.c
@@ -16,9 +16,17 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/map.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
#include <asm/machvec.h>
#include <asm/io.h>
+/* Dummy supplies, where voltage doesn't matter */
+static struct regulator_consumer_supply dummy_supplies[] = {
+ REGULATOR_SUPPLY("vddvario", "smsc911x"),
+ REGULATOR_SUPPLY("vdd33a", "smsc911x"),
+};
+
static const char *part_probes[] = { "cmdlinepart", NULL };
static struct mtd_partition rsk_partitions[] = {
@@ -67,6 +75,8 @@
static int __init rsk_devices_setup(void)
{
+ regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+
return platform_add_devices(rsk_devices,
ARRAY_SIZE(rsk_devices));
}
diff --git a/arch/sh/boards/mach-sdk7786/setup.c b/arch/sh/boards/mach-sdk7786/setup.c
index 27a2314..c29268b 100644
--- a/arch/sh/boards/mach-sdk7786/setup.c
+++ b/arch/sh/boards/mach-sdk7786/setup.c
@@ -11,6 +11,8 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
#include <linux/smsc911x.h>
#include <linux/i2c.h>
#include <linux/irq.h>
@@ -38,6 +40,12 @@
.resource = &heartbeat_resource,
};
+/* Dummy supplies, where voltage doesn't matter */
+static struct regulator_consumer_supply dummy_supplies[] = {
+ REGULATOR_SUPPLY("vddvario", "smsc911x"),
+ REGULATOR_SUPPLY("vdd33a", "smsc911x"),
+};
+
static struct resource smsc911x_resources[] = {
[0] = {
.name = "smsc911x-memory",
@@ -236,6 +244,8 @@
{
pr_info("Renesas Technology Europe SDK7786 support:\n");
+ regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+
sdk7786_fpga_init();
sdk7786_nmi_init();
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index ffbf5bc..35f6efa 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -18,6 +18,8 @@
#include <linux/mmc/sh_mobile_sdhi.h>
#include <linux/mtd/physmap.h>
#include <linux/delay.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
#include <linux/smc91x.h>
#include <linux/gpio.h>
#include <linux/input.h>
@@ -454,6 +456,15 @@
.resource = sh7724_usb1_gadget_resources,
};
+/* Fixed 3.3V regulator to be used by SDHI0, SDHI1 */
+static struct regulator_consumer_supply fixed3v3_power_consumers[] =
+{
+ REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
+ REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
+ REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
+ REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"),
+};
+
static struct resource sdhi0_cn7_resources[] = {
[0] = {
.name = "SDHI0",
@@ -684,6 +695,10 @@
&ms7724se_sdram_enter_end,
&ms7724se_sdram_leave_start,
&ms7724se_sdram_leave_end);
+
+ regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
+ ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
+
/* Reset Release */
fpga_out = __raw_readw(FPGA_OUT);
/* bit4: NTSC_PDN, bit5: NTSC_RESET */
diff --git a/arch/sh/include/asm/sections.h b/arch/sh/include/asm/sections.h
index 4a53500..1b61997 100644
--- a/arch/sh/include/asm/sections.h
+++ b/arch/sh/include/asm/sections.h
@@ -6,7 +6,6 @@
extern long __nosave_begin, __nosave_end;
extern long __machvec_start, __machvec_end;
extern char __uncached_start, __uncached_end;
-extern char _ebss[];
extern char __start_eh_frame[], __stop_eh_frame[];
#endif /* __ASM_SH_SECTIONS_H */
diff --git a/arch/sh/include/cpu-sh4/cpu/sh7757.h b/arch/sh/include/cpu-sh4/cpu/sh7757.h
index 41f9f8b..5340f3b 100644
--- a/arch/sh/include/cpu-sh4/cpu/sh7757.h
+++ b/arch/sh/include/cpu-sh4/cpu/sh7757.h
@@ -283,5 +283,7 @@
SHDMA_SLAVE_RIIC8_RX,
SHDMA_SLAVE_RIIC9_TX,
SHDMA_SLAVE_RIIC9_RX,
+ SHDMA_SLAVE_RSPI_TX,
+ SHDMA_SLAVE_RSPI_RX,
};
#endif /* __ASM_SH7757_H__ */
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
index c87e78f..5f30f80 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
@@ -334,8 +334,8 @@
CLKDEV_CON_ID("tpu0", &mstp_clks[HWBLK_TPU]),
CLKDEV_CON_ID("irda0", &mstp_clks[HWBLK_IRDA]),
CLKDEV_CON_ID("tsif0", &mstp_clks[HWBLK_TSIF]),
- CLKDEV_CON_ID("usb1", &mstp_clks[HWBLK_USB1]),
- CLKDEV_CON_ID("usb0", &mstp_clks[HWBLK_USB0]),
+ CLKDEV_DEV_ID("renesas_usbhs.1", &mstp_clks[HWBLK_USB1]),
+ CLKDEV_DEV_ID("renesas_usbhs.0", &mstp_clks[HWBLK_USB0]),
CLKDEV_CON_ID("2dg0", &mstp_clks[HWBLK_2DG]),
CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[HWBLK_SDHI0]),
CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[HWBLK_SDHI1]),
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
index 65786c7..6a868b0 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
@@ -12,6 +12,7 @@
#include <linux/platform_device.h>
#include <linux/serial.h>
#include <linux/serial_sci.h>
+#include <linux/sh_dma.h>
#include <linux/sh_timer.h>
#include <linux/sh_intc.h>
#include <linux/uio_driver.h>
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c
index a770842..4a2f357 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c
@@ -216,6 +216,20 @@
TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0x42,
},
+ {
+ .slave_id = SHDMA_SLAVE_RSPI_TX,
+ .addr = 0xfe480004,
+ .chcr = SM_INC | 0x800 | 0x40000000 |
+ TS_INDEX2VAL(XMIT_SZ_16BIT),
+ .mid_rid = 0xc1,
+ },
+ {
+ .slave_id = SHDMA_SLAVE_RSPI_RX,
+ .addr = 0xfe480004,
+ .chcr = DM_INC | 0x800 | 0x40000000 |
+ TS_INDEX2VAL(XMIT_SZ_16BIT),
+ .mid_rid = 0xc2,
+ },
};
static const struct sh_dmae_slave_config sh7757_dmae2_slaves[] = {
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index 7b57bf1..ebe7a7d 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -273,7 +273,7 @@
data_resource.start = virt_to_phys(_etext);
data_resource.end = virt_to_phys(_edata)-1;
bss_resource.start = virt_to_phys(__bss_start);
- bss_resource.end = virt_to_phys(_ebss)-1;
+ bss_resource.end = virt_to_phys(__bss_stop)-1;
#ifdef CONFIG_CMDLINE_OVERWRITE
strlcpy(command_line, CONFIG_CMDLINE, sizeof(command_line));
diff --git a/arch/sh/kernel/sh_ksyms_32.c b/arch/sh/kernel/sh_ksyms_32.c
index 3896f26..2a0a596 100644
--- a/arch/sh/kernel/sh_ksyms_32.c
+++ b/arch/sh/kernel/sh_ksyms_32.c
@@ -19,7 +19,6 @@
EXPORT_SYMBOL(csum_partial_copy_generic);
EXPORT_SYMBOL(copy_page);
EXPORT_SYMBOL(__clear_user);
-EXPORT_SYMBOL(_ebss);
EXPORT_SYMBOL(empty_zero_page);
#define DECLARE_EXPORT(name) \
diff --git a/arch/sh/kernel/vmlinux.lds.S b/arch/sh/kernel/vmlinux.lds.S
index c98905f..db88cbf 100644
--- a/arch/sh/kernel/vmlinux.lds.S
+++ b/arch/sh/kernel/vmlinux.lds.S
@@ -78,7 +78,6 @@
. = ALIGN(PAGE_SIZE);
__init_end = .;
BSS_SECTION(0, PAGE_SIZE, 4)
- _ebss = .; /* uClinux MTD sucks */
_end = . ;
STABS_DEBUG
diff --git a/arch/sh/lib/mcount.S b/arch/sh/lib/mcount.S
index 84a5776..60164e6 100644
--- a/arch/sh/lib/mcount.S
+++ b/arch/sh/lib/mcount.S
@@ -39,7 +39,7 @@
*
* Make sure the stack pointer contains a valid address. Valid
* addresses for kernel stacks are anywhere after the bss
- * (after _ebss) and anywhere in init_thread_union (init_stack).
+ * (after __bss_stop) and anywhere in init_thread_union (init_stack).
*/
#define STACK_CHECK() \
mov #(THREAD_SIZE >> 10), r0; \
@@ -60,7 +60,7 @@
cmp/hi r2, r1; \
bf stack_panic; \
\
- /* If sp > _ebss then we're OK. */ \
+ /* If sp > __bss_stop then we're OK. */ \
mov.l .L_ebss, r1; \
cmp/hi r1, r15; \
bt 1f; \
@@ -70,7 +70,7 @@
cmp/hs r1, r15; \
bf stack_panic; \
\
- /* If sp > init_stack && sp < _ebss, not OK. */ \
+ /* If sp > init_stack && sp < __bss_stop, not OK. */ \
add r0, r1; \
cmp/hs r1, r15; \
bt stack_panic; \
@@ -292,8 +292,6 @@
nop
.align 2
-.L_ebss:
- .long _ebss
.L_init_thread_union:
.long init_thread_union
.Lpanic:
diff --git a/arch/sh/mm/fault.c b/arch/sh/mm/fault.c
index 1fc25d8..3bdc1ad 100644
--- a/arch/sh/mm/fault.c
+++ b/arch/sh/mm/fault.c
@@ -58,11 +58,15 @@
{
pgd_t *pgd;
- if (mm)
+ if (mm) {
pgd = mm->pgd;
- else
+ } else {
pgd = get_TTB();
+ if (unlikely(!pgd))
+ pgd = swapper_pg_dir;
+ }
+
printk(KERN_ALERT "pgd = %p\n", pgd);
pgd += pgd_index(addr);
printk(KERN_ALERT "[%08lx] *pgd=%0*Lx", addr,
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index ba2657c..8ec3a1a 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1527,7 +1527,7 @@
If unsure, say Y. Only embedded should say N here.
config CC_STACKPROTECTOR
- bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)"
+ bool "Enable -fstack-protector buffer overflow detection"
---help---
This option turns on the -fstack-protector GCC feature. This
feature puts, at the beginning of functions, a canary value on
diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h
index 441520e..a3ac52b 100644
--- a/arch/x86/include/asm/mce.h
+++ b/arch/x86/include/asm/mce.h
@@ -33,6 +33,14 @@
#define MCI_STATUS_PCC (1ULL<<57) /* processor context corrupt */
#define MCI_STATUS_S (1ULL<<56) /* Signaled machine check */
#define MCI_STATUS_AR (1ULL<<55) /* Action required */
+#define MCACOD 0xffff /* MCA Error Code */
+
+/* Architecturally defined codes from SDM Vol. 3B Chapter 15 */
+#define MCACOD_SCRUB 0x00C0 /* 0xC0-0xCF Memory Scrubbing */
+#define MCACOD_SCRUBMSK 0xfff0
+#define MCACOD_L3WB 0x017A /* L3 Explicit Writeback */
+#define MCACOD_DATA 0x0134 /* Data Load */
+#define MCACOD_INSTR 0x0150 /* Instruction Fetch */
/* MCi_MISC register defines */
#define MCI_MISC_ADDR_LSB(m) ((m) & 0x3f)
diff --git a/arch/x86/include/asm/olpc.h b/arch/x86/include/asm/olpc.h
index 87bdbca..72f9adf6 100644
--- a/arch/x86/include/asm/olpc.h
+++ b/arch/x86/include/asm/olpc.h
@@ -100,25 +100,6 @@
extern int pci_olpc_init(void);
-/* EC related functions */
-
-extern int olpc_ec_cmd(unsigned char cmd, unsigned char *inbuf, size_t inlen,
- unsigned char *outbuf, size_t outlen);
-
-/* EC commands */
-
-#define EC_FIRMWARE_REV 0x08
-#define EC_WRITE_SCI_MASK 0x1b
-#define EC_WAKE_UP_WLAN 0x24
-#define EC_WLAN_LEAVE_RESET 0x25
-#define EC_READ_EB_MODE 0x2a
-#define EC_SET_SCI_INHIBIT 0x32
-#define EC_SET_SCI_INHIBIT_RELEASE 0x34
-#define EC_WLAN_ENTER_RESET 0x35
-#define EC_WRITE_EXT_SCI_MASK 0x38
-#define EC_SCI_QUERY 0x84
-#define EC_EXT_SCI_QUERY 0x85
-
/* SCI source values */
#define EC_SCI_SRC_EMPTY 0x00
diff --git a/arch/x86/include/asm/perf_event.h b/arch/x86/include/asm/perf_event.h
index dab3935..cb4e43b 100644
--- a/arch/x86/include/asm/perf_event.h
+++ b/arch/x86/include/asm/perf_event.h
@@ -196,11 +196,16 @@
extern void perf_events_lapic_init(void);
/*
- * Abuse bit 3 of the cpu eflags register to indicate proper PEBS IP fixups.
- * This flag is otherwise unused and ABI specified to be 0, so nobody should
- * care what we do with it.
+ * Abuse bits {3,5} of the cpu eflags register. These flags are otherwise
+ * unused and ABI specified to be 0, so nobody should care what we do with
+ * them.
+ *
+ * EXACT - the IP points to the exact instruction that triggered the
+ * event (HW bugs exempt).
+ * VM - original X86_VM_MASK; see set_linear_ip().
*/
#define PERF_EFLAGS_EXACT (1UL << 3)
+#define PERF_EFLAGS_VM (1UL << 5)
struct pt_regs;
extern unsigned long perf_instruction_pointer(struct pt_regs *regs);
diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c
index 95bf99d..1b8e5a0 100644
--- a/arch/x86/kernel/acpi/sleep.c
+++ b/arch/x86/kernel/acpi/sleep.c
@@ -25,10 +25,6 @@
static char temp_stack[4096];
#endif
-asmlinkage void acpi_enter_s3(void)
-{
- acpi_enter_sleep_state(3, wake_sleep_flags);
-}
/**
* acpi_suspend_lowlevel - save kernel state
*
diff --git a/arch/x86/kernel/acpi/sleep.h b/arch/x86/kernel/acpi/sleep.h
index 5653a57..67f59f8 100644
--- a/arch/x86/kernel/acpi/sleep.h
+++ b/arch/x86/kernel/acpi/sleep.h
@@ -2,7 +2,6 @@
* Variables and functions used by the code in sleep.c
*/
-#include <linux/linkage.h>
#include <asm/realmode.h>
extern unsigned long saved_video_mode;
@@ -11,7 +10,6 @@
extern int wakeup_pmode_return;
extern u8 wake_sleep_flags;
-extern asmlinkage void acpi_enter_s3(void);
extern unsigned long acpi_copy_wakeup_routine(unsigned long);
extern void wakeup_long64(void);
diff --git a/arch/x86/kernel/acpi/wakeup_32.S b/arch/x86/kernel/acpi/wakeup_32.S
index 7261083..13ab7205 100644
--- a/arch/x86/kernel/acpi/wakeup_32.S
+++ b/arch/x86/kernel/acpi/wakeup_32.S
@@ -74,7 +74,9 @@
ENTRY(do_suspend_lowlevel)
call save_processor_state
call save_registers
- call acpi_enter_s3
+ pushl $3
+ call acpi_enter_sleep_state
+ addl $4, %esp
# In case of S3 failure, we'll emerge here. Jump
# to ret_point to recover
diff --git a/arch/x86/kernel/acpi/wakeup_64.S b/arch/x86/kernel/acpi/wakeup_64.S
index 014d1d2..8ea5164 100644
--- a/arch/x86/kernel/acpi/wakeup_64.S
+++ b/arch/x86/kernel/acpi/wakeup_64.S
@@ -71,7 +71,9 @@
movq %rsi, saved_rsi
addq $8, %rsp
- call acpi_enter_s3
+ movl $3, %edi
+ xorl %eax, %eax
+ call acpi_enter_sleep_state
/* in case something went wrong, restore the machine status and go on */
jmp resume_point
diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c
index 931280f..afb7ff7 100644
--- a/arch/x86/kernel/alternative.c
+++ b/arch/x86/kernel/alternative.c
@@ -224,7 +224,7 @@
ideal_nops = intel_nops;
#endif
}
-
+ break;
default:
#ifdef CONFIG_X86_64
ideal_nops = k8_nops;
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 406eee7..a6c64aa 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -1204,7 +1204,7 @@
BUG_ON(!cfg->vector);
vector = cfg->vector;
- for_each_cpu(cpu, cfg->domain)
+ for_each_cpu_and(cpu, cfg->domain, cpu_online_mask)
per_cpu(vector_irq, cpu)[vector] = -1;
cfg->vector = 0;
@@ -1212,7 +1212,7 @@
if (likely(!cfg->move_in_progress))
return;
- for_each_cpu(cpu, cfg->old_domain) {
+ for_each_cpu_and(cpu, cfg->old_domain, cpu_online_mask) {
for (vector = FIRST_EXTERNAL_VECTOR; vector < NR_VECTORS;
vector++) {
if (per_cpu(vector_irq, cpu)[vector] != irq)
diff --git a/arch/x86/kernel/cpu/mcheck/mce-severity.c b/arch/x86/kernel/cpu/mcheck/mce-severity.c
index 413c2ce..1301762 100644
--- a/arch/x86/kernel/cpu/mcheck/mce-severity.c
+++ b/arch/x86/kernel/cpu/mcheck/mce-severity.c
@@ -55,13 +55,6 @@
#define MCI_UC_S (MCI_STATUS_UC|MCI_STATUS_S)
#define MCI_UC_SAR (MCI_STATUS_UC|MCI_STATUS_S|MCI_STATUS_AR)
#define MCI_ADDR (MCI_STATUS_ADDRV|MCI_STATUS_MISCV)
-#define MCACOD 0xffff
-/* Architecturally defined codes from SDM Vol. 3B Chapter 15 */
-#define MCACOD_SCRUB 0x00C0 /* 0xC0-0xCF Memory Scrubbing */
-#define MCACOD_SCRUBMSK 0xfff0
-#define MCACOD_L3WB 0x017A /* L3 Explicit Writeback */
-#define MCACOD_DATA 0x0134 /* Data Load */
-#define MCACOD_INSTR 0x0150 /* Instruction Fetch */
MCESEV(
NO, "Invalid",
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 5e095f8..292d025 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -103,6 +103,8 @@
static DEFINE_PER_CPU(struct work_struct, mce_work);
+static void (*quirk_no_way_out)(int bank, struct mce *m, struct pt_regs *regs);
+
/*
* CPU/chipset specific EDAC code can register a notifier call here to print
* MCE errors in a human-readable form.
@@ -650,14 +652,18 @@
* Do a quick check if any of the events requires a panic.
* This decides if we keep the events around or clear them.
*/
-static int mce_no_way_out(struct mce *m, char **msg, unsigned long *validp)
+static int mce_no_way_out(struct mce *m, char **msg, unsigned long *validp,
+ struct pt_regs *regs)
{
int i, ret = 0;
for (i = 0; i < banks; i++) {
m->status = mce_rdmsrl(MSR_IA32_MCx_STATUS(i));
- if (m->status & MCI_STATUS_VAL)
+ if (m->status & MCI_STATUS_VAL) {
__set_bit(i, validp);
+ if (quirk_no_way_out)
+ quirk_no_way_out(i, m, regs);
+ }
if (mce_severity(m, tolerant, msg) >= MCE_PANIC_SEVERITY)
ret = 1;
}
@@ -1040,7 +1046,7 @@
*final = m;
memset(valid_banks, 0, sizeof(valid_banks));
- no_way_out = mce_no_way_out(&m, &msg, valid_banks);
+ no_way_out = mce_no_way_out(&m, &msg, valid_banks, regs);
barrier();
@@ -1418,6 +1424,34 @@
}
}
+/*
+ * During IFU recovery Sandy Bridge -EP4S processors set the RIPV and
+ * EIPV bits in MCG_STATUS to zero on the affected logical processor (SDM
+ * Vol 3B Table 15-20). But this confuses both the code that determines
+ * whether the machine check occurred in kernel or user mode, and also
+ * the severity assessment code. Pretend that EIPV was set, and take the
+ * ip/cs values from the pt_regs that mce_gather_info() ignored earlier.
+ */
+static void quirk_sandybridge_ifu(int bank, struct mce *m, struct pt_regs *regs)
+{
+ if (bank != 0)
+ return;
+ if ((m->mcgstatus & (MCG_STATUS_EIPV|MCG_STATUS_RIPV)) != 0)
+ return;
+ if ((m->status & (MCI_STATUS_OVER|MCI_STATUS_UC|
+ MCI_STATUS_EN|MCI_STATUS_MISCV|MCI_STATUS_ADDRV|
+ MCI_STATUS_PCC|MCI_STATUS_S|MCI_STATUS_AR|
+ MCACOD)) !=
+ (MCI_STATUS_UC|MCI_STATUS_EN|
+ MCI_STATUS_MISCV|MCI_STATUS_ADDRV|MCI_STATUS_S|
+ MCI_STATUS_AR|MCACOD_INSTR))
+ return;
+
+ m->mcgstatus |= MCG_STATUS_EIPV;
+ m->ip = regs->ip;
+ m->cs = regs->cs;
+}
+
/* Add per CPU specific workarounds here */
static int __cpuinit __mcheck_cpu_apply_quirks(struct cpuinfo_x86 *c)
{
@@ -1515,6 +1549,9 @@
*/
if (c->x86 == 6 && c->x86_model <= 13 && mce_bootlog < 0)
mce_bootlog = 0;
+
+ if (c->x86 == 6 && c->x86_model == 45)
+ quirk_no_way_out = quirk_sandybridge_ifu;
}
if (monarch_timeout < 0)
monarch_timeout = 0;
diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c
index 29557aa..915b876 100644
--- a/arch/x86/kernel/cpu/perf_event.c
+++ b/arch/x86/kernel/cpu/perf_event.c
@@ -32,6 +32,8 @@
#include <asm/smp.h>
#include <asm/alternative.h>
#include <asm/timer.h>
+#include <asm/desc.h>
+#include <asm/ldt.h>
#include "perf_event.h"
@@ -1738,6 +1740,29 @@
return (__range_not_ok(fp, size, TASK_SIZE) == 0);
}
+static unsigned long get_segment_base(unsigned int segment)
+{
+ struct desc_struct *desc;
+ int idx = segment >> 3;
+
+ if ((segment & SEGMENT_TI_MASK) == SEGMENT_LDT) {
+ if (idx > LDT_ENTRIES)
+ return 0;
+
+ if (idx > current->active_mm->context.size)
+ return 0;
+
+ desc = current->active_mm->context.ldt;
+ } else {
+ if (idx > GDT_ENTRIES)
+ return 0;
+
+ desc = __this_cpu_ptr(&gdt_page.gdt[0]);
+ }
+
+ return get_desc_base(desc + idx);
+}
+
#ifdef CONFIG_COMPAT
#include <asm/compat.h>
@@ -1746,13 +1771,17 @@
perf_callchain_user32(struct pt_regs *regs, struct perf_callchain_entry *entry)
{
/* 32-bit process in 64-bit kernel. */
+ unsigned long ss_base, cs_base;
struct stack_frame_ia32 frame;
const void __user *fp;
if (!test_thread_flag(TIF_IA32))
return 0;
- fp = compat_ptr(regs->bp);
+ cs_base = get_segment_base(regs->cs);
+ ss_base = get_segment_base(regs->ss);
+
+ fp = compat_ptr(ss_base + regs->bp);
while (entry->nr < PERF_MAX_STACK_DEPTH) {
unsigned long bytes;
frame.next_frame = 0;
@@ -1765,8 +1794,8 @@
if (!valid_user_frame(fp, sizeof(frame)))
break;
- perf_callchain_store(entry, frame.return_address);
- fp = compat_ptr(frame.next_frame);
+ perf_callchain_store(entry, cs_base + frame.return_address);
+ fp = compat_ptr(ss_base + frame.next_frame);
}
return 1;
}
@@ -1789,6 +1818,12 @@
return;
}
+ /*
+ * We don't know what to do with VM86 stacks.. ignore them for now.
+ */
+ if (regs->flags & (X86_VM_MASK | PERF_EFLAGS_VM))
+ return;
+
fp = (void __user *)regs->bp;
perf_callchain_store(entry, regs->ip);
@@ -1816,16 +1851,50 @@
}
}
+/*
+ * Deal with code segment offsets for the various execution modes:
+ *
+ * VM86 - the good olde 16 bit days, where the linear address is
+ * 20 bits and we use regs->ip + 0x10 * regs->cs.
+ *
+ * IA32 - Where we need to look at GDT/LDT segment descriptor tables
+ * to figure out what the 32bit base address is.
+ *
+ * X32 - has TIF_X32 set, but is running in x86_64
+ *
+ * X86_64 - CS,DS,SS,ES are all zero based.
+ */
+static unsigned long code_segment_base(struct pt_regs *regs)
+{
+ /*
+ * If we are in VM86 mode, add the segment offset to convert to a
+ * linear address.
+ */
+ if (regs->flags & X86_VM_MASK)
+ return 0x10 * regs->cs;
+
+ /*
+ * For IA32 we look at the GDT/LDT segment base to convert the
+ * effective IP to a linear address.
+ */
+#ifdef CONFIG_X86_32
+ if (user_mode(regs) && regs->cs != __USER_CS)
+ return get_segment_base(regs->cs);
+#else
+ if (test_thread_flag(TIF_IA32)) {
+ if (user_mode(regs) && regs->cs != __USER32_CS)
+ return get_segment_base(regs->cs);
+ }
+#endif
+ return 0;
+}
+
unsigned long perf_instruction_pointer(struct pt_regs *regs)
{
- unsigned long ip;
-
if (perf_guest_cbs && perf_guest_cbs->is_in_guest())
- ip = perf_guest_cbs->get_guest_ip();
- else
- ip = instruction_pointer(regs);
+ return perf_guest_cbs->get_guest_ip();
- return ip;
+ return regs->ip + code_segment_base(regs);
}
unsigned long perf_misc_flags(struct pt_regs *regs)
@@ -1838,7 +1907,7 @@
else
misc |= PERF_RECORD_MISC_GUEST_KERNEL;
} else {
- if (!kernel_ip(regs->ip))
+ if (user_mode(regs))
misc |= PERF_RECORD_MISC_USER;
else
misc |= PERF_RECORD_MISC_KERNEL;
diff --git a/arch/x86/kernel/cpu/perf_event.h b/arch/x86/kernel/cpu/perf_event.h
index 821d53b..6605a81 100644
--- a/arch/x86/kernel/cpu/perf_event.h
+++ b/arch/x86/kernel/cpu/perf_event.h
@@ -516,6 +516,26 @@
#endif
}
+/*
+ * Not all PMUs provide the right context information to place the reported IP
+ * into full context. Specifically segment registers are typically not
+ * supplied.
+ *
+ * Assuming the address is a linear address (it is for IBS), we fake the CS and
+ * vm86 mode using the known zero-based code segment and 'fix up' the registers
+ * to reflect this.
+ *
+ * Intel PEBS/LBR appear to typically provide the effective address, nothing
+ * much we can do about that but pray and treat it like a linear address.
+ */
+static inline void set_linear_ip(struct pt_regs *regs, unsigned long ip)
+{
+ regs->cs = kernel_ip(ip) ? __KERNEL_CS : __USER_CS;
+ if (regs->flags & X86_VM_MASK)
+ regs->flags ^= (PERF_EFLAGS_VM | X86_VM_MASK);
+ regs->ip = ip;
+}
+
#ifdef CONFIG_CPU_SUP_AMD
int amd_pmu_init(void);
diff --git a/arch/x86/kernel/cpu/perf_event_amd_ibs.c b/arch/x86/kernel/cpu/perf_event_amd_ibs.c
index da9bcdc..7bfb5be 100644
--- a/arch/x86/kernel/cpu/perf_event_amd_ibs.c
+++ b/arch/x86/kernel/cpu/perf_event_amd_ibs.c
@@ -13,6 +13,8 @@
#include <asm/apic.h>
+#include "perf_event.h"
+
static u32 ibs_caps;
#if defined(CONFIG_PERF_EVENTS) && defined(CONFIG_CPU_SUP_AMD)
@@ -536,7 +538,7 @@
if (check_rip && (ibs_data.regs[2] & IBS_RIP_INVALID)) {
regs.flags &= ~PERF_EFLAGS_EXACT;
} else {
- instruction_pointer_set(®s, ibs_data.regs[1]);
+ set_linear_ip(®s, ibs_data.regs[1]);
regs.flags |= PERF_EFLAGS_EXACT;
}
diff --git a/arch/x86/kernel/cpu/perf_event_intel_ds.c b/arch/x86/kernel/cpu/perf_event_intel_ds.c
index 629ae0b..e38d97b 100644
--- a/arch/x86/kernel/cpu/perf_event_intel_ds.c
+++ b/arch/x86/kernel/cpu/perf_event_intel_ds.c
@@ -499,7 +499,7 @@
* We sampled a branch insn, rewind using the LBR stack
*/
if (ip == to) {
- regs->ip = from;
+ set_linear_ip(regs, from);
return 1;
}
@@ -529,7 +529,7 @@
} while (to < ip);
if (to == ip) {
- regs->ip = old_to;
+ set_linear_ip(regs, old_to);
return 1;
}
@@ -569,7 +569,8 @@
* A possible PERF_SAMPLE_REGS will have to transfer all regs.
*/
regs = *iregs;
- regs.ip = pebs->ip;
+ regs.flags = pebs->flags;
+ set_linear_ip(®s, pebs->ip);
regs.bp = pebs->bp;
regs.sp = pebs->sp;
diff --git a/arch/x86/kernel/cpu/perf_event_intel_uncore.h b/arch/x86/kernel/cpu/perf_event_intel_uncore.h
index f385189..c9e5dc5 100644
--- a/arch/x86/kernel/cpu/perf_event_intel_uncore.h
+++ b/arch/x86/kernel/cpu/perf_event_intel_uncore.h
@@ -5,7 +5,7 @@
#include "perf_event.h"
#define UNCORE_PMU_NAME_LEN 32
-#define UNCORE_PMU_HRTIMER_INTERVAL (60 * NSEC_PER_SEC)
+#define UNCORE_PMU_HRTIMER_INTERVAL (60LL * NSEC_PER_SEC)
#define UNCORE_FIXED_EVENT 0xff
#define UNCORE_PMC_IDX_MAX_GENERIC 8
diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c
index 1f5f1d5..7ad683d 100644
--- a/arch/x86/kernel/irq.c
+++ b/arch/x86/kernel/irq.c
@@ -328,6 +328,7 @@
chip->irq_retrigger(data);
raw_spin_unlock(&desc->lock);
}
+ __this_cpu_write(vector_irq[vector], -1);
}
}
#endif
diff --git a/arch/x86/kernel/kdebugfs.c b/arch/x86/kernel/kdebugfs.c
index 1d5d31e..dc1404b 100644
--- a/arch/x86/kernel/kdebugfs.c
+++ b/arch/x86/kernel/kdebugfs.c
@@ -107,7 +107,7 @@
{
struct setup_data_node *node;
struct setup_data *data;
- int error = -ENOMEM;
+ int error;
struct dentry *d;
struct page *pg;
u64 pa_data;
@@ -121,8 +121,10 @@
while (pa_data) {
node = kmalloc(sizeof(*node), GFP_KERNEL);
- if (!node)
+ if (!node) {
+ error = -ENOMEM;
goto err_dir;
+ }
pg = pfn_to_page((pa_data+sizeof(*data)-1) >> PAGE_SHIFT);
if (PageHighMem(pg)) {
diff --git a/arch/x86/kvm/i8259.c b/arch/x86/kvm/i8259.c
index 1df8fb9..e498b18 100644
--- a/arch/x86/kvm/i8259.c
+++ b/arch/x86/kvm/i8259.c
@@ -316,6 +316,11 @@
addr &= 1;
if (addr == 0) {
if (val & 0x10) {
+ u8 edge_irr = s->irr & ~s->elcr;
+ int i;
+ bool found;
+ struct kvm_vcpu *vcpu;
+
s->init4 = val & 1;
s->last_irr = 0;
s->irr &= s->elcr;
@@ -333,6 +338,18 @@
if (val & 0x08)
pr_pic_unimpl(
"level sensitive irq not supported");
+
+ kvm_for_each_vcpu(i, vcpu, s->pics_state->kvm)
+ if (kvm_apic_accept_pic_intr(vcpu)) {
+ found = true;
+ break;
+ }
+
+
+ if (found)
+ for (irq = 0; irq < PIC_NUM_PINS/2; irq++)
+ if (edge_irr & (1 << irq))
+ pic_clear_isr(s, irq);
} else if (val & 0x08) {
if (val & 0x04)
s->poll = 1;
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index c39b607..c00f03d 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -1488,13 +1488,6 @@
loadsegment(ds, vmx->host_state.ds_sel);
loadsegment(es, vmx->host_state.es_sel);
}
-#else
- /*
- * The sysexit path does not restore ds/es, so we must set them to
- * a reasonable value ourselves.
- */
- loadsegment(ds, __USER_DS);
- loadsegment(es, __USER_DS);
#endif
reload_tss();
#ifdef CONFIG_X86_64
@@ -6370,6 +6363,19 @@
#endif
);
+#ifndef CONFIG_X86_64
+ /*
+ * The sysexit path does not restore ds/es, so we must set them to
+ * a reasonable value ourselves.
+ *
+ * We can't defer this to vmx_load_host_state() since that function
+ * may be executed in interrupt context, which saves and restore segments
+ * around it, nullifying its effect.
+ */
+ loadsegment(ds, __USER_DS);
+ loadsegment(es, __USER_DS);
+#endif
+
vcpu->arch.regs_avail = ~((1 << VCPU_REGS_RIP) | (1 << VCPU_REGS_RSP)
| (1 << VCPU_EXREG_RFLAGS)
| (1 << VCPU_EXREG_CPL)
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 59b5950..42bce48 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -925,6 +925,10 @@
*/
getboottime(&boot);
+ if (kvm->arch.kvmclock_offset) {
+ struct timespec ts = ns_to_timespec(kvm->arch.kvmclock_offset);
+ boot = timespec_sub(boot, ts);
+ }
wc.sec = boot.tv_sec;
wc.nsec = boot.tv_nsec;
wc.version = version;
diff --git a/arch/x86/mm/srat.c b/arch/x86/mm/srat.c
index 4599c3e..4ddf497 100644
--- a/arch/x86/mm/srat.c
+++ b/arch/x86/mm/srat.c
@@ -142,23 +142,23 @@
#endif
/* Callback for parsing of the Proximity Domain <-> Memory Area mappings */
-void __init
+int __init
acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma)
{
u64 start, end;
int node, pxm;
if (srat_disabled())
- return;
+ return -1;
if (ma->header.length != sizeof(struct acpi_srat_mem_affinity)) {
bad_srat();
- return;
+ return -1;
}
if ((ma->flags & ACPI_SRAT_MEM_ENABLED) == 0)
- return;
+ return -1;
if ((ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE) && !save_add_info())
- return;
+ return -1;
start = ma->base_address;
end = start + ma->length;
pxm = ma->proximity_domain;
@@ -168,12 +168,12 @@
if (node < 0) {
printk(KERN_ERR "SRAT: Too many proximity domains.\n");
bad_srat();
- return;
+ return -1;
}
if (numa_add_memblk(node, start, end) < 0) {
bad_srat();
- return;
+ return -1;
}
node_set(node, numa_nodes_parsed);
@@ -181,6 +181,7 @@
printk(KERN_INFO "SRAT: Node %u PXM %u [mem %#010Lx-%#010Lx]\n",
node, pxm,
(unsigned long long) start, (unsigned long long) end - 1);
+ return 0;
}
void __init acpi_numa_arch_fixup(void) {}
diff --git a/arch/x86/platform/olpc/olpc-xo1-pm.c b/arch/x86/platform/olpc/olpc-xo1-pm.c
index 0ce8616c..d75582d 100644
--- a/arch/x86/platform/olpc/olpc-xo1-pm.c
+++ b/arch/x86/platform/olpc/olpc-xo1-pm.c
@@ -18,6 +18,7 @@
#include <linux/pm.h>
#include <linux/mfd/core.h>
#include <linux/suspend.h>
+#include <linux/olpc-ec.h>
#include <asm/io.h>
#include <asm/olpc.h>
@@ -51,16 +52,11 @@
static int xo1_power_state_enter(suspend_state_t pm_state)
{
unsigned long saved_sci_mask;
- int r;
/* Only STR is supported */
if (pm_state != PM_SUSPEND_MEM)
return -EINVAL;
- r = olpc_ec_cmd(EC_SET_SCI_INHIBIT, NULL, 0, NULL, 0);
- if (r)
- return r;
-
/*
* Save SCI mask (this gets lost since PM1_EN is used as a mask for
* wakeup events, which is not necessarily the same event set)
@@ -76,16 +72,6 @@
/* Restore SCI mask (using dword access to CS5536_PM1_EN) */
outl(saved_sci_mask, acpi_base + CS5536_PM1_STS);
- /* Tell the EC to stop inhibiting SCIs */
- olpc_ec_cmd(EC_SET_SCI_INHIBIT_RELEASE, NULL, 0, NULL, 0);
-
- /*
- * Tell the wireless module to restart USB communication.
- * Must be done twice.
- */
- olpc_ec_cmd(EC_WAKE_UP_WLAN, NULL, 0, NULL, 0);
- olpc_ec_cmd(EC_WAKE_UP_WLAN, NULL, 0, NULL, 0);
-
return 0;
}
diff --git a/arch/x86/platform/olpc/olpc-xo1-sci.c b/arch/x86/platform/olpc/olpc-xo1-sci.c
index 04b8c73..63d4aa4 100644
--- a/arch/x86/platform/olpc/olpc-xo1-sci.c
+++ b/arch/x86/platform/olpc/olpc-xo1-sci.c
@@ -23,6 +23,7 @@
#include <linux/power_supply.h>
#include <linux/suspend.h>
#include <linux/workqueue.h>
+#include <linux/olpc-ec.h>
#include <asm/io.h>
#include <asm/msr.h>
diff --git a/arch/x86/platform/olpc/olpc-xo15-sci.c b/arch/x86/platform/olpc/olpc-xo15-sci.c
index 599be49..2fdca25 100644
--- a/arch/x86/platform/olpc/olpc-xo15-sci.c
+++ b/arch/x86/platform/olpc/olpc-xo15-sci.c
@@ -13,6 +13,7 @@
#include <linux/slab.h>
#include <linux/workqueue.h>
#include <linux/power_supply.h>
+#include <linux/olpc-ec.h>
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
diff --git a/arch/x86/platform/olpc/olpc.c b/arch/x86/platform/olpc/olpc.c
index a4bee53..2737608 100644
--- a/arch/x86/platform/olpc/olpc.c
+++ b/arch/x86/platform/olpc/olpc.c
@@ -14,14 +14,13 @@
#include <linux/init.h>
#include <linux/module.h>
#include <linux/delay.h>
-#include <linux/spinlock.h>
#include <linux/io.h>
#include <linux/string.h>
#include <linux/platform_device.h>
#include <linux/of.h>
#include <linux/syscore_ops.h>
-#include <linux/debugfs.h>
#include <linux/mutex.h>
+#include <linux/olpc-ec.h>
#include <asm/geode.h>
#include <asm/setup.h>
@@ -31,17 +30,6 @@
struct olpc_platform_t olpc_platform_info;
EXPORT_SYMBOL_GPL(olpc_platform_info);
-static DEFINE_SPINLOCK(ec_lock);
-
-/* debugfs interface to EC commands */
-#define EC_MAX_CMD_ARGS (5 + 1) /* cmd byte + 5 args */
-#define EC_MAX_CMD_REPLY (8)
-
-static struct dentry *ec_debugfs_dir;
-static DEFINE_MUTEX(ec_debugfs_cmd_lock);
-static unsigned char ec_debugfs_resp[EC_MAX_CMD_REPLY];
-static unsigned int ec_debugfs_resp_bytes;
-
/* EC event mask to be applied during suspend (defining wakeup sources). */
static u16 ec_wakeup_mask;
@@ -125,16 +113,13 @@
* <http://wiki.laptop.org/go/Ec_specification>. Unfortunately, while
* OpenFirmware's source is available, the EC's is not.
*/
-int olpc_ec_cmd(unsigned char cmd, unsigned char *inbuf, size_t inlen,
- unsigned char *outbuf, size_t outlen)
+static int olpc_xo1_ec_cmd(u8 cmd, u8 *inbuf, size_t inlen, u8 *outbuf,
+ size_t outlen, void *arg)
{
- unsigned long flags;
int ret = -EIO;
int i;
int restarts = 0;
- spin_lock_irqsave(&ec_lock, flags);
-
/* Clear OBF */
for (i = 0; i < 10 && (obf_status(0x6c) == 1); i++)
inb(0x68);
@@ -198,10 +183,8 @@
ret = 0;
err:
- spin_unlock_irqrestore(&ec_lock, flags);
return ret;
}
-EXPORT_SYMBOL_GPL(olpc_ec_cmd);
void olpc_ec_wakeup_set(u16 value)
{
@@ -280,96 +263,6 @@
}
EXPORT_SYMBOL_GPL(olpc_ec_sci_query);
-static ssize_t ec_debugfs_cmd_write(struct file *file, const char __user *buf,
- size_t size, loff_t *ppos)
-{
- int i, m;
- unsigned char ec_cmd[EC_MAX_CMD_ARGS];
- unsigned int ec_cmd_int[EC_MAX_CMD_ARGS];
- char cmdbuf[64];
- int ec_cmd_bytes;
-
- mutex_lock(&ec_debugfs_cmd_lock);
-
- size = simple_write_to_buffer(cmdbuf, sizeof(cmdbuf), ppos, buf, size);
-
- m = sscanf(cmdbuf, "%x:%u %x %x %x %x %x", &ec_cmd_int[0],
- &ec_debugfs_resp_bytes,
- &ec_cmd_int[1], &ec_cmd_int[2], &ec_cmd_int[3],
- &ec_cmd_int[4], &ec_cmd_int[5]);
- if (m < 2 || ec_debugfs_resp_bytes > EC_MAX_CMD_REPLY) {
- /* reset to prevent overflow on read */
- ec_debugfs_resp_bytes = 0;
-
- printk(KERN_DEBUG "olpc-ec: bad ec cmd: "
- "cmd:response-count [arg1 [arg2 ...]]\n");
- size = -EINVAL;
- goto out;
- }
-
- /* convert scanf'd ints to char */
- ec_cmd_bytes = m - 2;
- for (i = 0; i <= ec_cmd_bytes; i++)
- ec_cmd[i] = ec_cmd_int[i];
-
- printk(KERN_DEBUG "olpc-ec: debugfs cmd 0x%02x with %d args "
- "%02x %02x %02x %02x %02x, want %d returns\n",
- ec_cmd[0], ec_cmd_bytes, ec_cmd[1], ec_cmd[2], ec_cmd[3],
- ec_cmd[4], ec_cmd[5], ec_debugfs_resp_bytes);
-
- olpc_ec_cmd(ec_cmd[0], (ec_cmd_bytes == 0) ? NULL : &ec_cmd[1],
- ec_cmd_bytes, ec_debugfs_resp, ec_debugfs_resp_bytes);
-
- printk(KERN_DEBUG "olpc-ec: response "
- "%02x %02x %02x %02x %02x %02x %02x %02x (%d bytes expected)\n",
- ec_debugfs_resp[0], ec_debugfs_resp[1], ec_debugfs_resp[2],
- ec_debugfs_resp[3], ec_debugfs_resp[4], ec_debugfs_resp[5],
- ec_debugfs_resp[6], ec_debugfs_resp[7], ec_debugfs_resp_bytes);
-
-out:
- mutex_unlock(&ec_debugfs_cmd_lock);
- return size;
-}
-
-static ssize_t ec_debugfs_cmd_read(struct file *file, char __user *buf,
- size_t size, loff_t *ppos)
-{
- unsigned int i, r;
- char *rp;
- char respbuf[64];
-
- mutex_lock(&ec_debugfs_cmd_lock);
- rp = respbuf;
- rp += sprintf(rp, "%02x", ec_debugfs_resp[0]);
- for (i = 1; i < ec_debugfs_resp_bytes; i++)
- rp += sprintf(rp, ", %02x", ec_debugfs_resp[i]);
- mutex_unlock(&ec_debugfs_cmd_lock);
- rp += sprintf(rp, "\n");
-
- r = rp - respbuf;
- return simple_read_from_buffer(buf, size, ppos, respbuf, r);
-}
-
-static const struct file_operations ec_debugfs_genops = {
- .write = ec_debugfs_cmd_write,
- .read = ec_debugfs_cmd_read,
-};
-
-static void setup_debugfs(void)
-{
- ec_debugfs_dir = debugfs_create_dir("olpc-ec", 0);
- if (ec_debugfs_dir == ERR_PTR(-ENODEV))
- return;
-
- debugfs_create_file("cmd", 0600, ec_debugfs_dir, NULL,
- &ec_debugfs_genops);
-}
-
-static int olpc_ec_suspend(void)
-{
- return olpc_ec_mask_write(ec_wakeup_mask);
-}
-
static bool __init check_ofw_architecture(struct device_node *root)
{
const char *olpc_arch;
@@ -424,8 +317,59 @@
return 0;
}
-static struct syscore_ops olpc_syscore_ops = {
- .suspend = olpc_ec_suspend,
+static int olpc_xo1_ec_probe(struct platform_device *pdev)
+{
+ /* get the EC revision */
+ olpc_ec_cmd(EC_FIRMWARE_REV, NULL, 0,
+ (unsigned char *) &olpc_platform_info.ecver, 1);
+
+ /* EC version 0x5f adds support for wide SCI mask */
+ if (olpc_platform_info.ecver >= 0x5f)
+ olpc_platform_info.flags |= OLPC_F_EC_WIDE_SCI;
+
+ pr_info("OLPC board revision %s%X (EC=%x)\n",
+ ((olpc_platform_info.boardrev & 0xf) < 8) ? "pre" : "",
+ olpc_platform_info.boardrev >> 4,
+ olpc_platform_info.ecver);
+
+ return 0;
+}
+static int olpc_xo1_ec_suspend(struct platform_device *pdev)
+{
+ olpc_ec_mask_write(ec_wakeup_mask);
+
+ /*
+ * Squelch SCIs while suspended. This is a fix for
+ * <http://dev.laptop.org/ticket/1835>.
+ */
+ return olpc_ec_cmd(EC_SET_SCI_INHIBIT, NULL, 0, NULL, 0);
+}
+
+static int olpc_xo1_ec_resume(struct platform_device *pdev)
+{
+ /* Tell the EC to stop inhibiting SCIs */
+ olpc_ec_cmd(EC_SET_SCI_INHIBIT_RELEASE, NULL, 0, NULL, 0);
+
+ /*
+ * Tell the wireless module to restart USB communication.
+ * Must be done twice.
+ */
+ olpc_ec_cmd(EC_WAKE_UP_WLAN, NULL, 0, NULL, 0);
+ olpc_ec_cmd(EC_WAKE_UP_WLAN, NULL, 0, NULL, 0);
+
+ return 0;
+}
+
+static struct olpc_ec_driver ec_xo1_driver = {
+ .probe = olpc_xo1_ec_probe,
+ .suspend = olpc_xo1_ec_suspend,
+ .resume = olpc_xo1_ec_resume,
+ .ec_cmd = olpc_xo1_ec_cmd,
+};
+
+static struct olpc_ec_driver ec_xo1_5_driver = {
+ .probe = olpc_xo1_ec_probe,
+ .ec_cmd = olpc_xo1_ec_cmd,
};
static int __init olpc_init(void)
@@ -435,16 +379,17 @@
if (!olpc_ofw_present() || !platform_detect())
return 0;
- spin_lock_init(&ec_lock);
+ /* register the XO-1 and 1.5-specific EC handler */
+ if (olpc_platform_info.boardrev < olpc_board_pre(0xd0)) /* XO-1 */
+ olpc_ec_driver_register(&ec_xo1_driver, NULL);
+ else
+ olpc_ec_driver_register(&ec_xo1_5_driver, NULL);
+ platform_device_register_simple("olpc-ec", -1, NULL, 0);
/* assume B1 and above models always have a DCON */
if (olpc_board_at_least(olpc_board(0xb1)))
olpc_platform_info.flags |= OLPC_F_DCON;
- /* get the EC revision */
- olpc_ec_cmd(EC_FIRMWARE_REV, NULL, 0,
- (unsigned char *) &olpc_platform_info.ecver, 1);
-
#ifdef CONFIG_PCI_OLPC
/* If the VSA exists let it emulate PCI, if not emulate in kernel.
* XO-1 only. */
@@ -452,14 +397,6 @@
!cs5535_has_vsa2())
x86_init.pci.arch_init = pci_olpc_init;
#endif
- /* EC version 0x5f adds support for wide SCI mask */
- if (olpc_platform_info.ecver >= 0x5f)
- olpc_platform_info.flags |= OLPC_F_EC_WIDE_SCI;
-
- printk(KERN_INFO "OLPC board revision %s%X (EC=%x)\n",
- ((olpc_platform_info.boardrev & 0xf) < 8) ? "pre" : "",
- olpc_platform_info.boardrev >> 4,
- olpc_platform_info.ecver);
if (olpc_platform_info.boardrev < olpc_board_pre(0xd0)) { /* XO-1 */
r = add_xo1_platform_devices();
@@ -467,9 +404,6 @@
return r;
}
- register_syscore_ops(&olpc_syscore_ops);
- setup_debugfs();
-
return 0;
}
diff --git a/arch/x86/syscalls/syscall_64.tbl b/arch/x86/syscalls/syscall_64.tbl
index 51171ae..29aed7a 100644
--- a/arch/x86/syscalls/syscall_64.tbl
+++ b/arch/x86/syscalls/syscall_64.tbl
@@ -318,7 +318,7 @@
309 common getcpu sys_getcpu
310 64 process_vm_readv sys_process_vm_readv
311 64 process_vm_writev sys_process_vm_writev
-312 64 kcmp sys_kcmp
+312 common kcmp sys_kcmp
#
# x32-specific system call numbers start at 512 to avoid cache impact
diff --git a/drivers/acpi/acpica/achware.h b/drivers/acpi/acpica/achware.h
index 5ccb99a..5de4ec7 100644
--- a/drivers/acpi/acpica/achware.h
+++ b/drivers/acpi/acpica/achware.h
@@ -83,22 +83,22 @@
/*
* hwsleep - sleep/wake support (Legacy sleep registers)
*/
-acpi_status acpi_hw_legacy_sleep(u8 sleep_state, u8 flags);
+acpi_status acpi_hw_legacy_sleep(u8 sleep_state);
-acpi_status acpi_hw_legacy_wake_prep(u8 sleep_state, u8 flags);
+acpi_status acpi_hw_legacy_wake_prep(u8 sleep_state);
-acpi_status acpi_hw_legacy_wake(u8 sleep_state, u8 flags);
+acpi_status acpi_hw_legacy_wake(u8 sleep_state);
/*
* hwesleep - sleep/wake support (Extended FADT-V5 sleep registers)
*/
void acpi_hw_execute_sleep_method(char *method_name, u32 integer_argument);
-acpi_status acpi_hw_extended_sleep(u8 sleep_state, u8 flags);
+acpi_status acpi_hw_extended_sleep(u8 sleep_state);
-acpi_status acpi_hw_extended_wake_prep(u8 sleep_state, u8 flags);
+acpi_status acpi_hw_extended_wake_prep(u8 sleep_state);
-acpi_status acpi_hw_extended_wake(u8 sleep_state, u8 flags);
+acpi_status acpi_hw_extended_wake(u8 sleep_state);
/*
* hwvalid - Port I/O with validation
diff --git a/drivers/acpi/acpica/hwesleep.c b/drivers/acpi/acpica/hwesleep.c
index 48518da..94996f9 100644
--- a/drivers/acpi/acpica/hwesleep.c
+++ b/drivers/acpi/acpica/hwesleep.c
@@ -90,7 +90,6 @@
* FUNCTION: acpi_hw_extended_sleep
*
* PARAMETERS: sleep_state - Which sleep state to enter
- * flags - ACPI_EXECUTE_GTS to run optional method
*
* RETURN: Status
*
@@ -100,7 +99,7 @@
*
******************************************************************************/
-acpi_status acpi_hw_extended_sleep(u8 sleep_state, u8 flags)
+acpi_status acpi_hw_extended_sleep(u8 sleep_state)
{
acpi_status status;
u8 sleep_type_value;
@@ -125,12 +124,6 @@
acpi_gbl_system_awake_and_running = FALSE;
- /* Optionally execute _GTS (Going To Sleep) */
-
- if (flags & ACPI_EXECUTE_GTS) {
- acpi_hw_execute_sleep_method(METHOD_PATHNAME__GTS, sleep_state);
- }
-
/* Flush caches, as per ACPI specification */
ACPI_FLUSH_CPU_CACHE();
@@ -172,7 +165,6 @@
* FUNCTION: acpi_hw_extended_wake_prep
*
* PARAMETERS: sleep_state - Which sleep state we just exited
- * flags - ACPI_EXECUTE_BFS to run optional method
*
* RETURN: Status
*
@@ -181,7 +173,7 @@
*
******************************************************************************/
-acpi_status acpi_hw_extended_wake_prep(u8 sleep_state, u8 flags)
+acpi_status acpi_hw_extended_wake_prep(u8 sleep_state)
{
acpi_status status;
u8 sleep_type_value;
@@ -200,11 +192,6 @@
&acpi_gbl_FADT.sleep_control);
}
- /* Optionally execute _BFS (Back From Sleep) */
-
- if (flags & ACPI_EXECUTE_BFS) {
- acpi_hw_execute_sleep_method(METHOD_PATHNAME__BFS, sleep_state);
- }
return_ACPI_STATUS(AE_OK);
}
@@ -222,7 +209,7 @@
*
******************************************************************************/
-acpi_status acpi_hw_extended_wake(u8 sleep_state, u8 flags)
+acpi_status acpi_hw_extended_wake(u8 sleep_state)
{
ACPI_FUNCTION_TRACE(hw_extended_wake);
diff --git a/drivers/acpi/acpica/hwsleep.c b/drivers/acpi/acpica/hwsleep.c
index 9960fe9..3fddde0 100644
--- a/drivers/acpi/acpica/hwsleep.c
+++ b/drivers/acpi/acpica/hwsleep.c
@@ -56,7 +56,6 @@
* FUNCTION: acpi_hw_legacy_sleep
*
* PARAMETERS: sleep_state - Which sleep state to enter
- * flags - ACPI_EXECUTE_GTS to run optional method
*
* RETURN: Status
*
@@ -64,7 +63,7 @@
* THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED
*
******************************************************************************/
-acpi_status acpi_hw_legacy_sleep(u8 sleep_state, u8 flags)
+acpi_status acpi_hw_legacy_sleep(u8 sleep_state)
{
struct acpi_bit_register_info *sleep_type_reg_info;
struct acpi_bit_register_info *sleep_enable_reg_info;
@@ -110,12 +109,6 @@
return_ACPI_STATUS(status);
}
- /* Optionally execute _GTS (Going To Sleep) */
-
- if (flags & ACPI_EXECUTE_GTS) {
- acpi_hw_execute_sleep_method(METHOD_PATHNAME__GTS, sleep_state);
- }
-
/* Get current value of PM1A control */
status = acpi_hw_register_read(ACPI_REGISTER_PM1_CONTROL,
@@ -214,7 +207,6 @@
* FUNCTION: acpi_hw_legacy_wake_prep
*
* PARAMETERS: sleep_state - Which sleep state we just exited
- * flags - ACPI_EXECUTE_BFS to run optional method
*
* RETURN: Status
*
@@ -224,7 +216,7 @@
*
******************************************************************************/
-acpi_status acpi_hw_legacy_wake_prep(u8 sleep_state, u8 flags)
+acpi_status acpi_hw_legacy_wake_prep(u8 sleep_state)
{
acpi_status status;
struct acpi_bit_register_info *sleep_type_reg_info;
@@ -275,11 +267,6 @@
}
}
- /* Optionally execute _BFS (Back From Sleep) */
-
- if (flags & ACPI_EXECUTE_BFS) {
- acpi_hw_execute_sleep_method(METHOD_PATHNAME__BFS, sleep_state);
- }
return_ACPI_STATUS(status);
}
@@ -288,7 +275,6 @@
* FUNCTION: acpi_hw_legacy_wake
*
* PARAMETERS: sleep_state - Which sleep state we just exited
- * flags - Reserved, set to zero
*
* RETURN: Status
*
@@ -297,7 +283,7 @@
*
******************************************************************************/
-acpi_status acpi_hw_legacy_wake(u8 sleep_state, u8 flags)
+acpi_status acpi_hw_legacy_wake(u8 sleep_state)
{
acpi_status status;
diff --git a/drivers/acpi/acpica/hwxfsleep.c b/drivers/acpi/acpica/hwxfsleep.c
index f8684bf..1f165a7 100644
--- a/drivers/acpi/acpica/hwxfsleep.c
+++ b/drivers/acpi/acpica/hwxfsleep.c
@@ -50,7 +50,7 @@
/* Local prototypes */
static acpi_status
-acpi_hw_sleep_dispatch(u8 sleep_state, u8 flags, u32 function_id);
+acpi_hw_sleep_dispatch(u8 sleep_state, u32 function_id);
/*
* Dispatch table used to efficiently branch to the various sleep
@@ -235,7 +235,7 @@
*
******************************************************************************/
static acpi_status
-acpi_hw_sleep_dispatch(u8 sleep_state, u8 flags, u32 function_id)
+acpi_hw_sleep_dispatch(u8 sleep_state, u32 function_id)
{
acpi_status status;
struct acpi_sleep_functions *sleep_functions =
@@ -248,11 +248,11 @@
* use the extended sleep registers
*/
if (acpi_gbl_reduced_hardware || acpi_gbl_FADT.sleep_control.address) {
- status = sleep_functions->extended_function(sleep_state, flags);
+ status = sleep_functions->extended_function(sleep_state);
} else {
/* Legacy sleep */
- status = sleep_functions->legacy_function(sleep_state, flags);
+ status = sleep_functions->legacy_function(sleep_state);
}
return (status);
@@ -262,7 +262,7 @@
* For the case where reduced-hardware-only code is being generated,
* we know that only the extended sleep registers are available
*/
- status = sleep_functions->extended_function(sleep_state, flags);
+ status = sleep_functions->extended_function(sleep_state);
return (status);
#endif /* !ACPI_REDUCED_HARDWARE */
@@ -349,7 +349,6 @@
* FUNCTION: acpi_enter_sleep_state
*
* PARAMETERS: sleep_state - Which sleep state to enter
- * flags - ACPI_EXECUTE_GTS to run optional method
*
* RETURN: Status
*
@@ -357,7 +356,7 @@
* THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED
*
******************************************************************************/
-acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state, u8 flags)
+acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state)
{
acpi_status status;
@@ -371,7 +370,7 @@
}
status =
- acpi_hw_sleep_dispatch(sleep_state, flags, ACPI_SLEEP_FUNCTION_ID);
+ acpi_hw_sleep_dispatch(sleep_state, ACPI_SLEEP_FUNCTION_ID);
return_ACPI_STATUS(status);
}
@@ -391,14 +390,14 @@
* Called with interrupts DISABLED.
*
******************************************************************************/
-acpi_status acpi_leave_sleep_state_prep(u8 sleep_state, u8 flags)
+acpi_status acpi_leave_sleep_state_prep(u8 sleep_state)
{
acpi_status status;
ACPI_FUNCTION_TRACE(acpi_leave_sleep_state_prep);
status =
- acpi_hw_sleep_dispatch(sleep_state, flags,
+ acpi_hw_sleep_dispatch(sleep_state,
ACPI_WAKE_PREP_FUNCTION_ID);
return_ACPI_STATUS(status);
}
@@ -423,8 +422,7 @@
ACPI_FUNCTION_TRACE(acpi_leave_sleep_state);
-
- status = acpi_hw_sleep_dispatch(sleep_state, 0, ACPI_WAKE_FUNCTION_ID);
+ status = acpi_hw_sleep_dispatch(sleep_state, ACPI_WAKE_FUNCTION_ID);
return_ACPI_STATUS(status);
}
diff --git a/drivers/acpi/numa.c b/drivers/acpi/numa.c
index e56f3be..cb31298 100644
--- a/drivers/acpi/numa.c
+++ b/drivers/acpi/numa.c
@@ -237,6 +237,8 @@
return 0;
}
+static int __initdata parsed_numa_memblks;
+
static int __init
acpi_parse_memory_affinity(struct acpi_subtable_header * header,
const unsigned long end)
@@ -250,8 +252,8 @@
acpi_table_print_srat_entry(header);
/* let architecture-dependent part to do it */
- acpi_numa_memory_affinity_init(memory_affinity);
-
+ if (!acpi_numa_memory_affinity_init(memory_affinity))
+ parsed_numa_memblks++;
return 0;
}
@@ -304,8 +306,10 @@
acpi_numa_arch_fixup();
- if (cnt <= 0)
- return cnt ?: -ENOENT;
+ if (cnt < 0)
+ return cnt;
+ else if (!parsed_numa_memblks)
+ return -ENOENT;
return 0;
}
diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
index ec54014c..72a2c98 100644
--- a/drivers/acpi/pci_root.c
+++ b/drivers/acpi/pci_root.c
@@ -573,8 +573,15 @@
OSC_CLOCK_PWR_CAPABILITY_SUPPORT;
if (pci_msi_enabled())
flags |= OSC_MSI_SUPPORT;
- if (flags != base_flags)
- acpi_pci_osc_support(root, flags);
+ if (flags != base_flags) {
+ status = acpi_pci_osc_support(root, flags);
+ if (ACPI_FAILURE(status)) {
+ dev_info(root->bus->bridge, "ACPI _OSC support "
+ "notification failed, disabling PCIe ASPM\n");
+ pcie_no_aspm();
+ flags = base_flags;
+ }
+ }
if (!pcie_ports_disabled
&& (flags & ACPI_PCIE_REQ_SUPPORT) == ACPI_PCIE_REQ_SUPPORT) {
diff --git a/drivers/acpi/processor_driver.c b/drivers/acpi/processor_driver.c
index ff8e04f..bfc31cb 100644
--- a/drivers/acpi/processor_driver.c
+++ b/drivers/acpi/processor_driver.c
@@ -437,7 +437,7 @@
/* Normal CPU soft online event */
} else {
acpi_processor_ppc_has_changed(pr, 0);
- acpi_processor_cst_has_changed(pr);
+ acpi_processor_hotplug(pr);
acpi_processor_reevaluate_tstate(pr, action);
acpi_processor_tstate_has_changed(pr);
}
diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index 7a7a9c9..fdcdbb6 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -28,36 +28,7 @@
#include "internal.h"
#include "sleep.h"
-u8 wake_sleep_flags = ACPI_NO_OPTIONAL_METHODS;
-static unsigned int gts, bfs;
-static int set_param_wake_flag(const char *val, struct kernel_param *kp)
-{
- int ret = param_set_int(val, kp);
-
- if (ret)
- return ret;
-
- if (kp->arg == (const char *)>s) {
- if (gts)
- wake_sleep_flags |= ACPI_EXECUTE_GTS;
- else
- wake_sleep_flags &= ~ACPI_EXECUTE_GTS;
- }
- if (kp->arg == (const char *)&bfs) {
- if (bfs)
- wake_sleep_flags |= ACPI_EXECUTE_BFS;
- else
- wake_sleep_flags &= ~ACPI_EXECUTE_BFS;
- }
- return ret;
-}
-module_param_call(gts, set_param_wake_flag, param_get_int, >s, 0644);
-module_param_call(bfs, set_param_wake_flag, param_get_int, &bfs, 0644);
-MODULE_PARM_DESC(gts, "Enable evaluation of _GTS on suspend.");
-MODULE_PARM_DESC(bfs, "Enable evaluation of _BFS on resume".);
-
static u8 sleep_states[ACPI_S_STATE_COUNT];
-static bool pwr_btn_event_pending;
static void acpi_sleep_tts_switch(u32 acpi_state)
{
@@ -110,6 +81,7 @@
#ifdef CONFIG_ACPI_SLEEP
static u32 acpi_target_sleep_state = ACPI_STATE_S0;
+static bool pwr_btn_event_pending;
/*
* The ACPI specification wants us to save NVS memory regions during hibernation
@@ -305,7 +277,7 @@
switch (acpi_state) {
case ACPI_STATE_S1:
barrier();
- status = acpi_enter_sleep_state(acpi_state, wake_sleep_flags);
+ status = acpi_enter_sleep_state(acpi_state);
break;
case ACPI_STATE_S3:
@@ -319,8 +291,8 @@
/* This violates the spec but is required for bug compatibility. */
acpi_write_bit_register(ACPI_BITREG_SCI_ENABLE, 1);
- /* Reprogram control registers and execute _BFS */
- acpi_leave_sleep_state_prep(acpi_state, wake_sleep_flags);
+ /* Reprogram control registers */
+ acpi_leave_sleep_state_prep(acpi_state);
/* ACPI 3.0 specs (P62) says that it's the responsibility
* of the OSPM to clear the status bit [ implying that the
@@ -603,9 +575,9 @@
ACPI_FLUSH_CPU_CACHE();
/* This shouldn't return. If it returns, we have a problem */
- status = acpi_enter_sleep_state(ACPI_STATE_S4, wake_sleep_flags);
- /* Reprogram control registers and execute _BFS */
- acpi_leave_sleep_state_prep(ACPI_STATE_S4, wake_sleep_flags);
+ status = acpi_enter_sleep_state(ACPI_STATE_S4);
+ /* Reprogram control registers */
+ acpi_leave_sleep_state_prep(ACPI_STATE_S4);
return ACPI_SUCCESS(status) ? 0 : -EFAULT;
}
@@ -617,8 +589,8 @@
* enable it here.
*/
acpi_enable();
- /* Reprogram control registers and execute _BFS */
- acpi_leave_sleep_state_prep(ACPI_STATE_S4, wake_sleep_flags);
+ /* Reprogram control registers */
+ acpi_leave_sleep_state_prep(ACPI_STATE_S4);
/* Check the hardware signature */
if (facs && s4_hardware_signature != facs->hardware_signature) {
printk(KERN_EMERG "ACPI: Hardware changed while hibernated, "
@@ -892,33 +864,7 @@
/* acpi_sleep_prepare(ACPI_STATE_S5) should have already been called */
printk(KERN_DEBUG "%s called\n", __func__);
local_irq_disable();
- acpi_enter_sleep_state(ACPI_STATE_S5, wake_sleep_flags);
-}
-
-/*
- * ACPI 2.0 created the optional _GTS and _BFS,
- * but industry adoption has been neither rapid nor broad.
- *
- * Linux gets into trouble when it executes poorly validated
- * paths through the BIOS, so disable _GTS and _BFS by default,
- * but do speak up and offer the option to enable them.
- */
-static void __init acpi_gts_bfs_check(void)
-{
- acpi_handle dummy;
-
- if (ACPI_SUCCESS(acpi_get_handle(ACPI_ROOT_OBJECT, METHOD_PATHNAME__GTS, &dummy)))
- {
- printk(KERN_NOTICE PREFIX "BIOS offers _GTS\n");
- printk(KERN_NOTICE PREFIX "If \"acpi.gts=1\" improves suspend, "
- "please notify linux-acpi@vger.kernel.org\n");
- }
- if (ACPI_SUCCESS(acpi_get_handle(ACPI_ROOT_OBJECT, METHOD_PATHNAME__BFS, &dummy)))
- {
- printk(KERN_NOTICE PREFIX "BIOS offers _BFS\n");
- printk(KERN_NOTICE PREFIX "If \"acpi.bfs=1\" improves resume, "
- "please notify linux-acpi@vger.kernel.org\n");
- }
+ acpi_enter_sleep_state(ACPI_STATE_S5);
}
int __init acpi_sleep_init(void)
@@ -979,6 +925,5 @@
* object can also be evaluated when the system enters S5.
*/
register_reboot_notifier(&tts_notifier);
- acpi_gts_bfs_check();
return 0;
}
diff --git a/drivers/acpi/sysfs.c b/drivers/acpi/sysfs.c
index 240a244..7c3f98b 100644
--- a/drivers/acpi/sysfs.c
+++ b/drivers/acpi/sysfs.c
@@ -173,7 +173,7 @@
{
int result = 0;
- if (!strncmp(val, "enable", strlen("enable"))) {
+ if (!strncmp(val, "enable", sizeof("enable") - 1)) {
result = acpi_debug_trace(trace_method_name, trace_debug_level,
trace_debug_layer, 0);
if (result)
@@ -181,7 +181,7 @@
goto exit;
}
- if (!strncmp(val, "disable", strlen("disable"))) {
+ if (!strncmp(val, "disable", sizeof("disable") - 1)) {
int name = 0;
result = acpi_debug_trace((char *)&name, trace_debug_level,
trace_debug_layer, 0);
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 24712ad..311be18 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -65,6 +65,8 @@
#include <linux/mbus.h>
#include <linux/bitops.h>
#include <linux/gfp.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_device.h>
@@ -4026,7 +4028,7 @@
struct ata_host *host;
struct mv_host_priv *hpriv;
struct resource *res;
- int n_ports = 0;
+ int n_ports = 0, irq = 0;
int rc;
#if defined(CONFIG_HAVE_CLK)
int port;
@@ -4050,8 +4052,14 @@
return -EINVAL;
/* allocate host */
- mv_platform_data = pdev->dev.platform_data;
- n_ports = mv_platform_data->n_ports;
+ if (pdev->dev.of_node) {
+ of_property_read_u32(pdev->dev.of_node, "nr-ports", &n_ports);
+ irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
+ } else {
+ mv_platform_data = pdev->dev.platform_data;
+ n_ports = mv_platform_data->n_ports;
+ irq = platform_get_irq(pdev, 0);
+ }
host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL);
@@ -4109,8 +4117,7 @@
dev_info(&pdev->dev, "slots %u ports %d\n",
(unsigned)MV_MAX_Q_DEPTH, host->n_ports);
- rc = ata_host_activate(host, platform_get_irq(pdev, 0), mv_interrupt,
- IRQF_SHARED, &mv6_sht);
+ rc = ata_host_activate(host, irq, mv_interrupt, IRQF_SHARED, &mv6_sht);
if (!rc)
return 0;
@@ -4205,15 +4212,24 @@
#define mv_platform_resume NULL
#endif
+#ifdef CONFIG_OF
+static struct of_device_id mv_sata_dt_ids[] __devinitdata = {
+ { .compatible = "marvell,orion-sata", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, mv_sata_dt_ids);
+#endif
+
static struct platform_driver mv_platform_driver = {
- .probe = mv_platform_probe,
- .remove = __devexit_p(mv_platform_remove),
- .suspend = mv_platform_suspend,
- .resume = mv_platform_resume,
- .driver = {
- .name = DRV_NAME,
- .owner = THIS_MODULE,
- },
+ .probe = mv_platform_probe,
+ .remove = __devexit_p(mv_platform_remove),
+ .suspend = mv_platform_suspend,
+ .resume = mv_platform_resume,
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(mv_sata_dt_ids),
+ },
};
diff --git a/drivers/block/drbd/drbd_main.c b/drivers/block/drbd/drbd_main.c
index 2e0e7fc..dbe6135 100644
--- a/drivers/block/drbd/drbd_main.c
+++ b/drivers/block/drbd/drbd_main.c
@@ -3537,9 +3537,9 @@
}
/**
- * drbd_congested() - Callback for pdflush
+ * drbd_congested() - Callback for the flusher thread
* @congested_data: User data
- * @bdi_bits: Bits pdflush is currently interested in
+ * @bdi_bits: Bits the BDI flusher thread is currently interested in
*
* Returns 1<<BDI_async_congested and/or 1<<BDI_sync_congested if we are congested.
*/
diff --git a/drivers/dma/sh/shdma-base.c b/drivers/dma/sh/shdma-base.c
index 27f5c78..f4cd946 100644
--- a/drivers/dma/sh/shdma-base.c
+++ b/drivers/dma/sh/shdma-base.c
@@ -483,6 +483,7 @@
new->mark = DESC_PREPARED;
new->async_tx.flags = flags;
new->direction = direction;
+ new->partial = 0;
*len -= copy_size;
if (direction == DMA_MEM_TO_MEM || direction == DMA_MEM_TO_DEV)
@@ -644,6 +645,14 @@
case DMA_TERMINATE_ALL:
spin_lock_irqsave(&schan->chan_lock, flags);
ops->halt_channel(schan);
+
+ if (ops->get_partial && !list_empty(&schan->ld_queue)) {
+ /* Record partial transfer */
+ struct shdma_desc *desc = list_first_entry(&schan->ld_queue,
+ struct shdma_desc, node);
+ desc->partial = ops->get_partial(schan, desc);
+ }
+
spin_unlock_irqrestore(&schan->chan_lock, flags);
shdma_chan_ld_cleanup(schan, true);
diff --git a/drivers/dma/sh/shdma.c b/drivers/dma/sh/shdma.c
index 027c9be..f41bcc5 100644
--- a/drivers/dma/sh/shdma.c
+++ b/drivers/dma/sh/shdma.c
@@ -381,6 +381,17 @@
return true;
}
+static size_t sh_dmae_get_partial(struct shdma_chan *schan,
+ struct shdma_desc *sdesc)
+{
+ struct sh_dmae_chan *sh_chan = container_of(schan, struct sh_dmae_chan,
+ shdma_chan);
+ struct sh_dmae_desc *sh_desc = container_of(sdesc,
+ struct sh_dmae_desc, shdma_desc);
+ return (sh_desc->hw.tcr - sh_dmae_readl(sh_chan, TCR)) <<
+ sh_chan->xmit_shift;
+}
+
/* Called from error IRQ or NMI */
static bool sh_dmae_reset(struct sh_dmae_device *shdev)
{
@@ -632,6 +643,7 @@
.start_xfer = sh_dmae_start_xfer,
.embedded_desc = sh_dmae_embedded_desc,
.chan_irq = sh_dmae_chan_irq,
+ .get_partial = sh_dmae_get_partial,
};
static int __devinit sh_dmae_probe(struct platform_device *pdev)
diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c
index 6d1cbdf..b64502d 100644
--- a/drivers/iommu/amd_iommu.c
+++ b/drivers/iommu/amd_iommu.c
@@ -296,8 +296,13 @@
} else
dma_pdev = pci_dev_get(pdev);
+ /* Account for quirked devices */
swap_pci_ref(&dma_pdev, pci_get_dma_source(dma_pdev));
+ /*
+ * If it's a multifunction device that does not support our
+ * required ACS flags, add to the same group as function 0.
+ */
if (dma_pdev->multifunction &&
!pci_acs_enabled(dma_pdev, REQ_ACS_FLAGS))
swap_pci_ref(&dma_pdev,
@@ -305,14 +310,28 @@
PCI_DEVFN(PCI_SLOT(dma_pdev->devfn),
0)));
+ /*
+ * Devices on the root bus go through the iommu. If that's not us,
+ * find the next upstream device and test ACS up to the root bus.
+ * Finding the next device may require skipping virtual buses.
+ */
while (!pci_is_root_bus(dma_pdev->bus)) {
- if (pci_acs_path_enabled(dma_pdev->bus->self,
- NULL, REQ_ACS_FLAGS))
+ struct pci_bus *bus = dma_pdev->bus;
+
+ while (!bus->self) {
+ if (!pci_is_root_bus(bus))
+ bus = bus->parent;
+ else
+ goto root_bus;
+ }
+
+ if (pci_acs_path_enabled(bus->self, NULL, REQ_ACS_FLAGS))
break;
- swap_pci_ref(&dma_pdev, pci_dev_get(dma_pdev->bus->self));
+ swap_pci_ref(&dma_pdev, pci_dev_get(bus->self));
}
+root_bus:
group = iommu_group_get(&dma_pdev->dev);
pci_dev_put(dma_pdev);
if (!group) {
diff --git a/drivers/iommu/amd_iommu_init.c b/drivers/iommu/amd_iommu_init.c
index 500e7f1..0a2ea31 100644
--- a/drivers/iommu/amd_iommu_init.c
+++ b/drivers/iommu/amd_iommu_init.c
@@ -1131,9 +1131,6 @@
break;
}
- /* Make sure ACS will be enabled */
- pci_request_acs();
-
ret = amd_iommu_init_devices();
print_iommu_info();
@@ -1652,6 +1649,9 @@
early_acpi_os_unmap_memory((char __iomem *)ivrs_base, ivrs_size);
+ /* Make sure ACS will be enabled during PCI probe */
+ pci_request_acs();
+
return true;
}
diff --git a/drivers/iommu/exynos-iommu.c b/drivers/iommu/exynos-iommu.c
index 45350ff..80bad32 100644
--- a/drivers/iommu/exynos-iommu.c
+++ b/drivers/iommu/exynos-iommu.c
@@ -732,9 +732,9 @@
spin_lock_init(&priv->pgtablelock);
INIT_LIST_HEAD(&priv->clients);
- dom->geometry.aperture_start = 0;
- dom->geometry.aperture_end = ~0UL;
- dom->geometry.force_aperture = true;
+ domain->geometry.aperture_start = 0;
+ domain->geometry.aperture_end = ~0UL;
+ domain->geometry.force_aperture = true;
domain->priv = priv;
return 0;
diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c
index 7469b53..2297ec1 100644
--- a/drivers/iommu/intel-iommu.c
+++ b/drivers/iommu/intel-iommu.c
@@ -2008,6 +2008,7 @@
if (!drhd) {
printk(KERN_ERR "IOMMU: can't find DMAR for device %s\n",
pci_name(pdev));
+ free_domain_mem(domain);
return NULL;
}
iommu = drhd->iommu;
@@ -4124,8 +4125,13 @@
} else
dma_pdev = pci_dev_get(pdev);
+ /* Account for quirked devices */
swap_pci_ref(&dma_pdev, pci_get_dma_source(dma_pdev));
+ /*
+ * If it's a multifunction device that does not support our
+ * required ACS flags, add to the same group as function 0.
+ */
if (dma_pdev->multifunction &&
!pci_acs_enabled(dma_pdev, REQ_ACS_FLAGS))
swap_pci_ref(&dma_pdev,
@@ -4133,14 +4139,28 @@
PCI_DEVFN(PCI_SLOT(dma_pdev->devfn),
0)));
+ /*
+ * Devices on the root bus go through the iommu. If that's not us,
+ * find the next upstream device and test ACS up to the root bus.
+ * Finding the next device may require skipping virtual buses.
+ */
while (!pci_is_root_bus(dma_pdev->bus)) {
- if (pci_acs_path_enabled(dma_pdev->bus->self,
- NULL, REQ_ACS_FLAGS))
+ struct pci_bus *bus = dma_pdev->bus;
+
+ while (!bus->self) {
+ if (!pci_is_root_bus(bus))
+ bus = bus->parent;
+ else
+ goto root_bus;
+ }
+
+ if (pci_acs_path_enabled(bus->self, NULL, REQ_ACS_FLAGS))
break;
- swap_pci_ref(&dma_pdev, pci_dev_get(dma_pdev->bus->self));
+ swap_pci_ref(&dma_pdev, pci_dev_get(bus->self));
}
+root_bus:
group = iommu_group_get(&dma_pdev->dev);
pci_dev_put(dma_pdev);
if (!group) {
diff --git a/drivers/iommu/tegra-smmu.c b/drivers/iommu/tegra-smmu.c
index 4ba325a..2a4bb36 100644
--- a/drivers/iommu/tegra-smmu.c
+++ b/drivers/iommu/tegra-smmu.c
@@ -799,14 +799,14 @@
goto out;
}
}
- dev_err(smmu->dev, "Couldn't find %s\n", dev_name(c->dev));
+ dev_err(smmu->dev, "Couldn't find %s\n", dev_name(dev));
out:
spin_unlock(&as->client_lock);
}
static int smmu_iommu_domain_init(struct iommu_domain *domain)
{
- int i, err = -ENODEV;
+ int i, err = -EAGAIN;
unsigned long flags;
struct smmu_as *as;
struct smmu_device *smmu = smmu_handle;
@@ -814,11 +814,14 @@
/* Look for a free AS with lock held */
for (i = 0; i < smmu->num_as; i++) {
as = &smmu->as[i];
- if (!as->pdir_page) {
- err = alloc_pdir(as);
- if (!err)
- goto found;
- }
+
+ if (as->pdir_page)
+ continue;
+
+ err = alloc_pdir(as);
+ if (!err)
+ goto found;
+
if (err != -EAGAIN)
break;
}
diff --git a/drivers/md/Kconfig b/drivers/md/Kconfig
index 1eee45b..d949b78 100644
--- a/drivers/md/Kconfig
+++ b/drivers/md/Kconfig
@@ -268,13 +268,14 @@
needed for live data migration tools such as 'pvmove'.
config DM_RAID
- tristate "RAID 1/4/5/6 target"
+ tristate "RAID 1/4/5/6/10 target"
depends on BLK_DEV_DM
select MD_RAID1
+ select MD_RAID10
select MD_RAID456
select BLK_DEV_MD
---help---
- A dm target that supports RAID1, RAID4, RAID5 and RAID6 mappings
+ A dm target that supports RAID1, RAID10, RAID4, RAID5 and RAID6 mappings
A RAID-5 set of N drives with a capacity of C MB per drive provides
the capacity of C * (N - 1) MB, and protects against a failure
diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c
index 15dbe03..94e7f6b 100644
--- a/drivers/md/bitmap.c
+++ b/drivers/md/bitmap.c
@@ -1305,7 +1305,7 @@
prepare_to_wait(&bitmap->overflow_wait, &__wait,
TASK_UNINTERRUPTIBLE);
spin_unlock_irq(&bitmap->counts.lock);
- io_schedule();
+ schedule();
finish_wait(&bitmap->overflow_wait, &__wait);
continue;
}
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 9f7f8be..611b5f7 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -944,6 +944,44 @@
pr_debug("%dB behind alloc failed, doing sync I/O\n", bio->bi_size);
}
+struct raid1_plug_cb {
+ struct blk_plug_cb cb;
+ struct bio_list pending;
+ int pending_cnt;
+};
+
+static void raid1_unplug(struct blk_plug_cb *cb, bool from_schedule)
+{
+ struct raid1_plug_cb *plug = container_of(cb, struct raid1_plug_cb,
+ cb);
+ struct mddev *mddev = plug->cb.data;
+ struct r1conf *conf = mddev->private;
+ struct bio *bio;
+
+ if (from_schedule) {
+ spin_lock_irq(&conf->device_lock);
+ bio_list_merge(&conf->pending_bio_list, &plug->pending);
+ conf->pending_count += plug->pending_cnt;
+ spin_unlock_irq(&conf->device_lock);
+ md_wakeup_thread(mddev->thread);
+ kfree(plug);
+ return;
+ }
+
+ /* we aren't scheduling, so we can do the write-out directly. */
+ bio = bio_list_get(&plug->pending);
+ bitmap_unplug(mddev->bitmap);
+ wake_up(&conf->wait_barrier);
+
+ while (bio) { /* submit pending writes */
+ struct bio *next = bio->bi_next;
+ bio->bi_next = NULL;
+ generic_make_request(bio);
+ bio = next;
+ }
+ kfree(plug);
+}
+
static void make_request(struct mddev *mddev, struct bio * bio)
{
struct r1conf *conf = mddev->private;
@@ -957,6 +995,8 @@
const unsigned long do_sync = (bio->bi_rw & REQ_SYNC);
const unsigned long do_flush_fua = (bio->bi_rw & (REQ_FLUSH | REQ_FUA));
struct md_rdev *blocked_rdev;
+ struct blk_plug_cb *cb;
+ struct raid1_plug_cb *plug = NULL;
int first_clone;
int sectors_handled;
int max_sectors;
@@ -1259,11 +1299,22 @@
mbio->bi_private = r1_bio;
atomic_inc(&r1_bio->remaining);
+
+ cb = blk_check_plugged(raid1_unplug, mddev, sizeof(*plug));
+ if (cb)
+ plug = container_of(cb, struct raid1_plug_cb, cb);
+ else
+ plug = NULL;
spin_lock_irqsave(&conf->device_lock, flags);
- bio_list_add(&conf->pending_bio_list, mbio);
- conf->pending_count++;
+ if (plug) {
+ bio_list_add(&plug->pending, mbio);
+ plug->pending_cnt++;
+ } else {
+ bio_list_add(&conf->pending_bio_list, mbio);
+ conf->pending_count++;
+ }
spin_unlock_irqrestore(&conf->device_lock, flags);
- if (!mddev_check_plugged(mddev))
+ if (!plug)
md_wakeup_thread(mddev->thread);
}
/* Mustn't call r1_bio_write_done before this next test,
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 87a2d0b..adda94d 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -484,7 +484,8 @@
} else {
if (atomic_read(&sh->count)) {
BUG_ON(!list_empty(&sh->lru)
- && !test_bit(STRIPE_EXPANDING, &sh->state));
+ && !test_bit(STRIPE_EXPANDING, &sh->state)
+ && !test_bit(STRIPE_ON_UNPLUG_LIST, &sh->state));
} else {
if (!test_bit(STRIPE_HANDLE, &sh->state))
atomic_inc(&conf->active_stripes);
@@ -4010,6 +4011,62 @@
return sh;
}
+struct raid5_plug_cb {
+ struct blk_plug_cb cb;
+ struct list_head list;
+};
+
+static void raid5_unplug(struct blk_plug_cb *blk_cb, bool from_schedule)
+{
+ struct raid5_plug_cb *cb = container_of(
+ blk_cb, struct raid5_plug_cb, cb);
+ struct stripe_head *sh;
+ struct mddev *mddev = cb->cb.data;
+ struct r5conf *conf = mddev->private;
+
+ if (cb->list.next && !list_empty(&cb->list)) {
+ spin_lock_irq(&conf->device_lock);
+ while (!list_empty(&cb->list)) {
+ sh = list_first_entry(&cb->list, struct stripe_head, lru);
+ list_del_init(&sh->lru);
+ /*
+ * avoid race release_stripe_plug() sees
+ * STRIPE_ON_UNPLUG_LIST clear but the stripe
+ * is still in our list
+ */
+ smp_mb__before_clear_bit();
+ clear_bit(STRIPE_ON_UNPLUG_LIST, &sh->state);
+ __release_stripe(conf, sh);
+ }
+ spin_unlock_irq(&conf->device_lock);
+ }
+ kfree(cb);
+}
+
+static void release_stripe_plug(struct mddev *mddev,
+ struct stripe_head *sh)
+{
+ struct blk_plug_cb *blk_cb = blk_check_plugged(
+ raid5_unplug, mddev,
+ sizeof(struct raid5_plug_cb));
+ struct raid5_plug_cb *cb;
+
+ if (!blk_cb) {
+ release_stripe(sh);
+ return;
+ }
+
+ cb = container_of(blk_cb, struct raid5_plug_cb, cb);
+
+ if (cb->list.next == NULL)
+ INIT_LIST_HEAD(&cb->list);
+
+ if (!test_and_set_bit(STRIPE_ON_UNPLUG_LIST, &sh->state))
+ list_add_tail(&sh->lru, &cb->list);
+ else
+ release_stripe(sh);
+}
+
static void make_request(struct mddev *mddev, struct bio * bi)
{
struct r5conf *conf = mddev->private;
@@ -4138,8 +4195,7 @@
if ((bi->bi_rw & REQ_NOIDLE) &&
!test_and_set_bit(STRIPE_PREREAD_ACTIVE, &sh->state))
atomic_inc(&conf->preread_active_stripes);
- mddev_check_plugged(mddev);
- release_stripe(sh);
+ release_stripe_plug(mddev, sh);
} else {
/* cannot get stripe for read-ahead, just give-up */
clear_bit(BIO_UPTODATE, &bi->bi_flags);
@@ -4537,6 +4593,30 @@
return handled;
}
+#define MAX_STRIPE_BATCH 8
+static int handle_active_stripes(struct r5conf *conf)
+{
+ struct stripe_head *batch[MAX_STRIPE_BATCH], *sh;
+ int i, batch_size = 0;
+
+ while (batch_size < MAX_STRIPE_BATCH &&
+ (sh = __get_priority_stripe(conf)) != NULL)
+ batch[batch_size++] = sh;
+
+ if (batch_size == 0)
+ return batch_size;
+ spin_unlock_irq(&conf->device_lock);
+
+ for (i = 0; i < batch_size; i++)
+ handle_stripe(batch[i]);
+
+ cond_resched();
+
+ spin_lock_irq(&conf->device_lock);
+ for (i = 0; i < batch_size; i++)
+ __release_stripe(conf, batch[i]);
+ return batch_size;
+}
/*
* This is our raid5 kernel thread.
@@ -4547,7 +4627,6 @@
*/
static void raid5d(struct mddev *mddev)
{
- struct stripe_head *sh;
struct r5conf *conf = mddev->private;
int handled;
struct blk_plug plug;
@@ -4561,6 +4640,7 @@
spin_lock_irq(&conf->device_lock);
while (1) {
struct bio *bio;
+ int batch_size;
if (
!list_empty(&conf->bitmap_list)) {
@@ -4584,21 +4664,16 @@
handled++;
}
- sh = __get_priority_stripe(conf);
-
- if (!sh)
+ batch_size = handle_active_stripes(conf);
+ if (!batch_size)
break;
- spin_unlock_irq(&conf->device_lock);
-
- handled++;
- handle_stripe(sh);
- release_stripe(sh);
- cond_resched();
+ handled += batch_size;
- if (mddev->flags & ~(1<<MD_CHANGE_PENDING))
+ if (mddev->flags & ~(1<<MD_CHANGE_PENDING)) {
+ spin_unlock_irq(&conf->device_lock);
md_check_recovery(mddev);
-
- spin_lock_irq(&conf->device_lock);
+ spin_lock_irq(&conf->device_lock);
+ }
}
pr_debug("%d stripes handled\n", handled);
diff --git a/drivers/md/raid5.h b/drivers/md/raid5.h
index 61dbb61..a9fc249 100644
--- a/drivers/md/raid5.h
+++ b/drivers/md/raid5.h
@@ -321,6 +321,7 @@
STRIPE_BIOFILL_RUN,
STRIPE_COMPUTE_RUN,
STRIPE_OPS_REQ_PENDING,
+ STRIPE_ON_UNPLUG_LIST,
};
/*
diff --git a/drivers/mtd/maps/uclinux.c b/drivers/mtd/maps/uclinux.c
index cfff454..c3bb304 100644
--- a/drivers/mtd/maps/uclinux.c
+++ b/drivers/mtd/maps/uclinux.c
@@ -19,14 +19,13 @@
#include <linux/mtd/map.h>
#include <linux/mtd/partitions.h>
#include <asm/io.h>
+#include <asm/sections.h>
/****************************************************************************/
-extern char _ebss;
-
struct map_info uclinux_ram_map = {
.name = "RAM",
- .phys = (unsigned long)&_ebss,
+ .phys = (unsigned long)__bss_stop,
.size = 0,
};
diff --git a/drivers/net/irda/bfin_sir.c b/drivers/net/irda/bfin_sir.c
index a561ae4..c6a0299 100644
--- a/drivers/net/irda/bfin_sir.c
+++ b/drivers/net/irda/bfin_sir.c
@@ -158,7 +158,7 @@
/* If not add the 'RPOLC', we can't catch the receive interrupt.
* It's related with the HW layout and the IR transiver.
*/
- val |= IREN | RPOLC;
+ val |= UMOD_IRDA | RPOLC;
UART_PUT_GCTL(port, val);
return ret;
}
@@ -432,7 +432,7 @@
bfin_sir_stop_rx(port);
val = UART_GET_GCTL(port);
- val &= ~(UCEN | IREN | RPOLC);
+ val &= ~(UCEN | UMOD_MASK | RPOLC);
UART_PUT_GCTL(port, val);
#ifdef CONFIG_SIR_BFIN_DMA
@@ -518,10 +518,10 @@
* reset all the UART.
*/
val = UART_GET_GCTL(port);
- val &= ~(IREN | RPOLC);
+ val &= ~(UMOD_MASK | RPOLC);
UART_PUT_GCTL(port, val);
SSYNC();
- val |= IREN | RPOLC;
+ val |= UMOD_IRDA | RPOLC;
UART_PUT_GCTL(port, val);
SSYNC();
/* bfin_sir_set_speed(port, self->speed); */
diff --git a/drivers/net/wireless/libertas/if_usb.c b/drivers/net/wireless/libertas/if_usb.c
index 55a77e4..2798077 100644
--- a/drivers/net/wireless/libertas/if_usb.c
+++ b/drivers/net/wireless/libertas/if_usb.c
@@ -10,6 +10,7 @@
#include <linux/netdevice.h>
#include <linux/slab.h>
#include <linux/usb.h>
+#include <linux/olpc-ec.h>
#ifdef CONFIG_OLPC
#include <asm/olpc.h>
diff --git a/drivers/pinctrl/pinctrl-imx23.c b/drivers/pinctrl/pinctrl-imx23.c
index 75d3eff..3674d87 100644
--- a/drivers/pinctrl/pinctrl-imx23.c
+++ b/drivers/pinctrl/pinctrl-imx23.c
@@ -292,7 +292,7 @@
{
return platform_driver_register(&imx23_pinctrl_driver);
}
-arch_initcall(imx23_pinctrl_init);
+postcore_initcall(imx23_pinctrl_init);
static void __exit imx23_pinctrl_exit(void)
{
diff --git a/drivers/pinctrl/pinctrl-imx28.c b/drivers/pinctrl/pinctrl-imx28.c
index b973026..0f5b212 100644
--- a/drivers/pinctrl/pinctrl-imx28.c
+++ b/drivers/pinctrl/pinctrl-imx28.c
@@ -408,7 +408,7 @@
{
return platform_driver_register(&imx28_pinctrl_driver);
}
-arch_initcall(imx28_pinctrl_init);
+postcore_initcall(imx28_pinctrl_init);
static void __exit imx28_pinctrl_exit(void)
{
diff --git a/drivers/pinctrl/pinctrl-nomadik-db8500.c b/drivers/pinctrl/pinctrl-nomadik-db8500.c
index 6f99769..5f3e9d0 100644
--- a/drivers/pinctrl/pinctrl-nomadik-db8500.c
+++ b/drivers/pinctrl/pinctrl-nomadik-db8500.c
@@ -766,7 +766,7 @@
DB8500_FUNC_GROUPS(msp2, "msp2sck_a_1", "msp2_a_1");
DB8500_FUNC_GROUPS(mc4, "mc4_a_1", "mc4rstn_c_1");
DB8500_FUNC_GROUPS(mc1, "mc1_a_1", "mc1dir_a_1");
-DB8500_FUNC_GROUPS(hsi, "hsir1_a_1", "hsit1_a_1", "hsit_a_2");
+DB8500_FUNC_GROUPS(hsi, "hsir_a_1", "hsit_a_1", "hsit_a_2");
DB8500_FUNC_GROUPS(clkout, "clkout_a_1", "clkout_a_2", "clkout_c_1");
DB8500_FUNC_GROUPS(usb, "usb_a_1");
DB8500_FUNC_GROUPS(trig, "trig_b_1");
diff --git a/drivers/pinctrl/pinctrl-nomadik.c b/drivers/pinctrl/pinctrl-nomadik.c
index 53b0d49..ec6ac50 100644
--- a/drivers/pinctrl/pinctrl-nomadik.c
+++ b/drivers/pinctrl/pinctrl-nomadik.c
@@ -1731,7 +1731,6 @@
for (i = 0; i < npct->soc->gpio_num_ranges; i++) {
if (!nmk_gpio_chips[i]) {
dev_warn(&pdev->dev, "GPIO chip %d not registered yet\n", i);
- devm_kfree(&pdev->dev, npct);
return -EPROBE_DEFER;
}
npct->soc->gpio_ranges[i].gc = &nmk_gpio_chips[i]->chip;
diff --git a/drivers/pinctrl/pinctrl-sirf.c b/drivers/pinctrl/pinctrl-sirf.c
index 2aae8a8..7fca6ce 100644
--- a/drivers/pinctrl/pinctrl-sirf.c
+++ b/drivers/pinctrl/pinctrl-sirf.c
@@ -1217,7 +1217,6 @@
iounmap(spmx->gpio_virtbase);
out_no_gpio_remap:
platform_set_drvdata(pdev, NULL);
- devm_kfree(&pdev->dev, spmx);
return ret;
}
diff --git a/drivers/pinctrl/pinctrl-u300.c b/drivers/pinctrl/pinctrl-u300.c
index a7ad8c1..309f5b9 100644
--- a/drivers/pinctrl/pinctrl-u300.c
+++ b/drivers/pinctrl/pinctrl-u300.c
@@ -1121,10 +1121,8 @@
upmx->dev = &pdev->dev;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- ret = -ENOENT;
- goto out_no_resource;
- }
+ if (!res)
+ return -ENOENT;
upmx->phybase = res->start;
upmx->physize = resource_size(res);
@@ -1165,8 +1163,6 @@
platform_set_drvdata(pdev, NULL);
out_no_memregion:
release_mem_region(upmx->phybase, upmx->physize);
-out_no_resource:
- devm_kfree(&pdev->dev, upmx);
return ret;
}
diff --git a/drivers/platform/Makefile b/drivers/platform/Makefile
index 782953a..b17c16c 100644
--- a/drivers/platform/Makefile
+++ b/drivers/platform/Makefile
@@ -3,3 +3,4 @@
#
obj-$(CONFIG_X86) += x86/
+obj-$(CONFIG_OLPC) += olpc/
diff --git a/drivers/platform/olpc/Makefile b/drivers/platform/olpc/Makefile
new file mode 100644
index 0000000..dc8b26b
--- /dev/null
+++ b/drivers/platform/olpc/Makefile
@@ -0,0 +1,4 @@
+#
+# OLPC XO platform-specific drivers
+#
+obj-$(CONFIG_OLPC) += olpc-ec.o
diff --git a/drivers/platform/olpc/olpc-ec.c b/drivers/platform/olpc/olpc-ec.c
new file mode 100644
index 0000000..0f9f859
--- /dev/null
+++ b/drivers/platform/olpc/olpc-ec.c
@@ -0,0 +1,336 @@
+/*
+ * Generic driver for the OLPC Embedded Controller.
+ *
+ * Copyright (C) 2011-2012 One Laptop per Child Foundation.
+ *
+ * Licensed under the GPL v2 or later.
+ */
+#include <linux/completion.h>
+#include <linux/debugfs.h>
+#include <linux/spinlock.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+#include <linux/module.h>
+#include <linux/list.h>
+#include <linux/olpc-ec.h>
+#include <asm/olpc.h>
+
+struct ec_cmd_desc {
+ u8 cmd;
+ u8 *inbuf, *outbuf;
+ size_t inlen, outlen;
+
+ int err;
+ struct completion finished;
+ struct list_head node;
+
+ void *priv;
+};
+
+struct olpc_ec_priv {
+ struct olpc_ec_driver *drv;
+ struct work_struct worker;
+ struct mutex cmd_lock;
+
+ /* Pending EC commands */
+ struct list_head cmd_q;
+ spinlock_t cmd_q_lock;
+
+ struct dentry *dbgfs_dir;
+
+ /*
+ * Running an EC command while suspending means we don't always finish
+ * the command before the machine suspends. This means that the EC
+ * is expecting the command protocol to finish, but we after a period
+ * of time (while the OS is asleep) the EC times out and restarts its
+ * idle loop. Meanwhile, the OS wakes up, thinks it's still in the
+ * middle of the command protocol, starts throwing random things at
+ * the EC... and everyone's uphappy.
+ */
+ bool suspended;
+};
+
+static struct olpc_ec_driver *ec_driver;
+static struct olpc_ec_priv *ec_priv;
+static void *ec_cb_arg;
+
+void olpc_ec_driver_register(struct olpc_ec_driver *drv, void *arg)
+{
+ ec_driver = drv;
+ ec_cb_arg = arg;
+}
+EXPORT_SYMBOL_GPL(olpc_ec_driver_register);
+
+static void olpc_ec_worker(struct work_struct *w)
+{
+ struct olpc_ec_priv *ec = container_of(w, struct olpc_ec_priv, worker);
+ struct ec_cmd_desc *desc = NULL;
+ unsigned long flags;
+
+ /* Grab the first pending command from the queue */
+ spin_lock_irqsave(&ec->cmd_q_lock, flags);
+ if (!list_empty(&ec->cmd_q)) {
+ desc = list_first_entry(&ec->cmd_q, struct ec_cmd_desc, node);
+ list_del(&desc->node);
+ }
+ spin_unlock_irqrestore(&ec->cmd_q_lock, flags);
+
+ /* Do we actually have anything to do? */
+ if (!desc)
+ return;
+
+ /* Protect the EC hw with a mutex; only run one cmd at a time */
+ mutex_lock(&ec->cmd_lock);
+ desc->err = ec_driver->ec_cmd(desc->cmd, desc->inbuf, desc->inlen,
+ desc->outbuf, desc->outlen, ec_cb_arg);
+ mutex_unlock(&ec->cmd_lock);
+
+ /* Finished, wake up olpc_ec_cmd() */
+ complete(&desc->finished);
+
+ /* Run the worker thread again in case there are more cmds pending */
+ schedule_work(&ec->worker);
+}
+
+/*
+ * Throw a cmd descripter onto the list. We now have SMP OLPC machines, so
+ * locking is pretty critical.
+ */
+static void queue_ec_descriptor(struct ec_cmd_desc *desc,
+ struct olpc_ec_priv *ec)
+{
+ unsigned long flags;
+
+ INIT_LIST_HEAD(&desc->node);
+
+ spin_lock_irqsave(&ec->cmd_q_lock, flags);
+ list_add_tail(&desc->node, &ec->cmd_q);
+ spin_unlock_irqrestore(&ec->cmd_q_lock, flags);
+
+ schedule_work(&ec->worker);
+}
+
+int olpc_ec_cmd(u8 cmd, u8 *inbuf, size_t inlen, u8 *outbuf, size_t outlen)
+{
+ struct olpc_ec_priv *ec = ec_priv;
+ struct ec_cmd_desc desc;
+
+ /* Ensure a driver and ec hook have been registered */
+ if (WARN_ON(!ec_driver || !ec_driver->ec_cmd))
+ return -ENODEV;
+
+ if (!ec)
+ return -ENOMEM;
+
+ /* Suspending in the middle of a command hoses things really badly */
+ if (WARN_ON(ec->suspended))
+ return -EBUSY;
+
+ might_sleep();
+
+ desc.cmd = cmd;
+ desc.inbuf = inbuf;
+ desc.outbuf = outbuf;
+ desc.inlen = inlen;
+ desc.outlen = outlen;
+ desc.err = 0;
+ init_completion(&desc.finished);
+
+ queue_ec_descriptor(&desc, ec);
+
+ /* Timeouts must be handled in the platform-specific EC hook */
+ wait_for_completion(&desc.finished);
+
+ /* The worker thread dequeues the cmd; no need to do anything here */
+ return desc.err;
+}
+EXPORT_SYMBOL_GPL(olpc_ec_cmd);
+
+#ifdef CONFIG_DEBUG_FS
+
+/*
+ * debugfs support for "generic commands", to allow sending
+ * arbitrary EC commands from userspace.
+ */
+
+#define EC_MAX_CMD_ARGS (5 + 1) /* cmd byte + 5 args */
+#define EC_MAX_CMD_REPLY (8)
+
+static DEFINE_MUTEX(ec_dbgfs_lock);
+static unsigned char ec_dbgfs_resp[EC_MAX_CMD_REPLY];
+static unsigned int ec_dbgfs_resp_bytes;
+
+static ssize_t ec_dbgfs_cmd_write(struct file *file, const char __user *buf,
+ size_t size, loff_t *ppos)
+{
+ int i, m;
+ unsigned char ec_cmd[EC_MAX_CMD_ARGS];
+ unsigned int ec_cmd_int[EC_MAX_CMD_ARGS];
+ char cmdbuf[64];
+ int ec_cmd_bytes;
+
+ mutex_lock(&ec_dbgfs_lock);
+
+ size = simple_write_to_buffer(cmdbuf, sizeof(cmdbuf), ppos, buf, size);
+
+ m = sscanf(cmdbuf, "%x:%u %x %x %x %x %x", &ec_cmd_int[0],
+ &ec_dbgfs_resp_bytes, &ec_cmd_int[1], &ec_cmd_int[2],
+ &ec_cmd_int[3], &ec_cmd_int[4], &ec_cmd_int[5]);
+ if (m < 2 || ec_dbgfs_resp_bytes > EC_MAX_CMD_REPLY) {
+ /* reset to prevent overflow on read */
+ ec_dbgfs_resp_bytes = 0;
+
+ pr_debug("olpc-ec: bad ec cmd: cmd:response-count [arg1 [arg2 ...]]\n");
+ size = -EINVAL;
+ goto out;
+ }
+
+ /* convert scanf'd ints to char */
+ ec_cmd_bytes = m - 2;
+ for (i = 0; i <= ec_cmd_bytes; i++)
+ ec_cmd[i] = ec_cmd_int[i];
+
+ pr_debug("olpc-ec: debugfs cmd 0x%02x with %d args %02x %02x %02x %02x %02x, want %d returns\n",
+ ec_cmd[0], ec_cmd_bytes, ec_cmd[1], ec_cmd[2],
+ ec_cmd[3], ec_cmd[4], ec_cmd[5], ec_dbgfs_resp_bytes);
+
+ olpc_ec_cmd(ec_cmd[0], (ec_cmd_bytes == 0) ? NULL : &ec_cmd[1],
+ ec_cmd_bytes, ec_dbgfs_resp, ec_dbgfs_resp_bytes);
+
+ pr_debug("olpc-ec: response %02x %02x %02x %02x %02x %02x %02x %02x (%d bytes expected)\n",
+ ec_dbgfs_resp[0], ec_dbgfs_resp[1], ec_dbgfs_resp[2],
+ ec_dbgfs_resp[3], ec_dbgfs_resp[4], ec_dbgfs_resp[5],
+ ec_dbgfs_resp[6], ec_dbgfs_resp[7],
+ ec_dbgfs_resp_bytes);
+
+out:
+ mutex_unlock(&ec_dbgfs_lock);
+ return size;
+}
+
+static ssize_t ec_dbgfs_cmd_read(struct file *file, char __user *buf,
+ size_t size, loff_t *ppos)
+{
+ unsigned int i, r;
+ char *rp;
+ char respbuf[64];
+
+ mutex_lock(&ec_dbgfs_lock);
+ rp = respbuf;
+ rp += sprintf(rp, "%02x", ec_dbgfs_resp[0]);
+ for (i = 1; i < ec_dbgfs_resp_bytes; i++)
+ rp += sprintf(rp, ", %02x", ec_dbgfs_resp[i]);
+ mutex_unlock(&ec_dbgfs_lock);
+ rp += sprintf(rp, "\n");
+
+ r = rp - respbuf;
+ return simple_read_from_buffer(buf, size, ppos, respbuf, r);
+}
+
+static const struct file_operations ec_dbgfs_ops = {
+ .write = ec_dbgfs_cmd_write,
+ .read = ec_dbgfs_cmd_read,
+};
+
+static struct dentry *olpc_ec_setup_debugfs(void)
+{
+ struct dentry *dbgfs_dir;
+
+ dbgfs_dir = debugfs_create_dir("olpc-ec", NULL);
+ if (IS_ERR_OR_NULL(dbgfs_dir))
+ return NULL;
+
+ debugfs_create_file("cmd", 0600, dbgfs_dir, NULL, &ec_dbgfs_ops);
+
+ return dbgfs_dir;
+}
+
+#else
+
+static struct dentry *olpc_ec_setup_debugfs(void)
+{
+ return NULL;
+}
+
+#endif /* CONFIG_DEBUG_FS */
+
+static int olpc_ec_probe(struct platform_device *pdev)
+{
+ struct olpc_ec_priv *ec;
+ int err;
+
+ if (!ec_driver)
+ return -ENODEV;
+
+ ec = kzalloc(sizeof(*ec), GFP_KERNEL);
+ if (!ec)
+ return -ENOMEM;
+
+ ec->drv = ec_driver;
+ INIT_WORK(&ec->worker, olpc_ec_worker);
+ mutex_init(&ec->cmd_lock);
+
+ INIT_LIST_HEAD(&ec->cmd_q);
+ spin_lock_init(&ec->cmd_q_lock);
+
+ ec_priv = ec;
+ platform_set_drvdata(pdev, ec);
+
+ err = ec_driver->probe ? ec_driver->probe(pdev) : 0;
+ if (err) {
+ ec_priv = NULL;
+ kfree(ec);
+ } else {
+ ec->dbgfs_dir = olpc_ec_setup_debugfs();
+ }
+
+ return err;
+}
+
+static int olpc_ec_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct olpc_ec_priv *ec = platform_get_drvdata(pdev);
+ int err = 0;
+
+ if (ec_driver->suspend)
+ err = ec_driver->suspend(pdev);
+ if (!err)
+ ec->suspended = true;
+
+ return err;
+}
+
+static int olpc_ec_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct olpc_ec_priv *ec = platform_get_drvdata(pdev);
+
+ ec->suspended = false;
+ return ec_driver->resume ? ec_driver->resume(pdev) : 0;
+}
+
+static const struct dev_pm_ops olpc_ec_pm_ops = {
+ .suspend_late = olpc_ec_suspend,
+ .resume_early = olpc_ec_resume,
+};
+
+static struct platform_driver olpc_ec_plat_driver = {
+ .probe = olpc_ec_probe,
+ .driver = {
+ .name = "olpc-ec",
+ .pm = &olpc_ec_pm_ops,
+ },
+};
+
+static int __init olpc_ec_init_module(void)
+{
+ return platform_driver_register(&olpc_ec_plat_driver);
+}
+
+module_init(olpc_ec_init_module);
+
+MODULE_AUTHOR("Andres Salomon <dilinger@queued.net>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/platform/x86/xo1-rfkill.c b/drivers/platform/x86/xo1-rfkill.c
index b57ad86..1da13ed 100644
--- a/drivers/platform/x86/xo1-rfkill.c
+++ b/drivers/platform/x86/xo1-rfkill.c
@@ -12,8 +12,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/rfkill.h>
-
-#include <asm/olpc.h>
+#include <linux/olpc-ec.h>
static bool card_blocked;
diff --git a/drivers/power/olpc_battery.c b/drivers/power/olpc_battery.c
index 55b10b8..a89a41a 100644
--- a/drivers/power/olpc_battery.c
+++ b/drivers/power/olpc_battery.c
@@ -17,6 +17,7 @@
#include <linux/power_supply.h>
#include <linux/jiffies.h>
#include <linux/sched.h>
+#include <linux/olpc-ec.h>
#include <asm/olpc.h>
diff --git a/drivers/sh/intc/Kconfig b/drivers/sh/intc/Kconfig
index c88cbcc..a305731 100644
--- a/drivers/sh/intc/Kconfig
+++ b/drivers/sh/intc/Kconfig
@@ -1,3 +1,7 @@
+config SH_INTC
+ def_bool y
+ select IRQ_DOMAIN
+
comment "Interrupt controller options"
config INTC_USERIMASK
diff --git a/drivers/sh/intc/Makefile b/drivers/sh/intc/Makefile
index 44f006d..54ec2a0 100644
--- a/drivers/sh/intc/Makefile
+++ b/drivers/sh/intc/Makefile
@@ -1,4 +1,4 @@
-obj-y := access.o chip.o core.o handle.o virq.o
+obj-y := access.o chip.o core.o handle.o irqdomain.o virq.o
obj-$(CONFIG_INTC_BALANCING) += balancing.o
obj-$(CONFIG_INTC_USERIMASK) += userimask.o
diff --git a/drivers/sh/intc/core.c b/drivers/sh/intc/core.c
index 7e562cc..2374468 100644
--- a/drivers/sh/intc/core.c
+++ b/drivers/sh/intc/core.c
@@ -25,6 +25,7 @@
#include <linux/stat.h>
#include <linux/interrupt.h>
#include <linux/sh_intc.h>
+#include <linux/irqdomain.h>
#include <linux/device.h>
#include <linux/syscore_ops.h>
#include <linux/list.h>
@@ -310,6 +311,8 @@
BUG_ON(k > 256); /* _INTC_ADDR_E() and _INTC_ADDR_D() are 8 bits */
+ intc_irq_domain_init(d, hw);
+
/* register the vectors one by one */
for (i = 0; i < hw->nr_vectors; i++) {
struct intc_vect *vect = hw->vectors + i;
@@ -319,8 +322,8 @@
if (!vect->enum_id)
continue;
- res = irq_alloc_desc_at(irq, numa_node_id());
- if (res != irq && res != -EEXIST) {
+ res = irq_create_identity_mapping(d->domain, irq);
+ if (unlikely(res)) {
pr_err("can't get irq_desc for %d\n", irq);
continue;
}
@@ -340,8 +343,8 @@
* IRQ support, each vector still needs to have
* its own backing irq_desc.
*/
- res = irq_alloc_desc_at(irq2, numa_node_id());
- if (res != irq2 && res != -EEXIST) {
+ res = irq_create_identity_mapping(d->domain, irq2);
+ if (unlikely(res)) {
pr_err("can't get irq_desc for %d\n", irq2);
continue;
}
diff --git a/drivers/sh/intc/internals.h b/drivers/sh/intc/internals.h
index f034a97..7dff08e 100644
--- a/drivers/sh/intc/internals.h
+++ b/drivers/sh/intc/internals.h
@@ -1,5 +1,6 @@
#include <linux/sh_intc.h>
#include <linux/irq.h>
+#include <linux/irqdomain.h>
#include <linux/list.h>
#include <linux/kernel.h>
#include <linux/types.h>
@@ -66,6 +67,7 @@
unsigned int nr_sense;
struct intc_window *window;
unsigned int nr_windows;
+ struct irq_domain *domain;
struct irq_chip chip;
bool skip_suspend;
};
@@ -187,6 +189,9 @@
void intc_enable_disable_enum(struct intc_desc *desc, struct intc_desc_int *d,
intc_enum enum_id, int enable);
+/* irqdomain.c */
+void intc_irq_domain_init(struct intc_desc_int *d, struct intc_hw_desc *hw);
+
/* virq.c */
void intc_subgroup_init(struct intc_desc *desc, struct intc_desc_int *d);
void intc_irq_xlate_set(unsigned int irq, intc_enum id, struct intc_desc_int *d);
diff --git a/drivers/sh/intc/irqdomain.c b/drivers/sh/intc/irqdomain.c
new file mode 100644
index 0000000..3968f1c
--- /dev/null
+++ b/drivers/sh/intc/irqdomain.c
@@ -0,0 +1,68 @@
+/*
+ * IRQ domain support for SH INTC subsystem
+ *
+ * Copyright (C) 2012 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#define pr_fmt(fmt) "intc: " fmt
+
+#include <linux/irqdomain.h>
+#include <linux/sh_intc.h>
+#include <linux/export.h>
+#include "internals.h"
+
+/**
+ * intc_irq_domain_evt_xlate() - Generic xlate for vectored IRQs.
+ *
+ * This takes care of exception vector to hwirq translation through
+ * by way of evt2irq() translation.
+ *
+ * Note: For platforms that use a flat vector space without INTEVT this
+ * basically just mimics irq_domain_xlate_onecell() by way of a nopped
+ * out evt2irq() implementation.
+ */
+static int intc_evt_xlate(struct irq_domain *d, struct device_node *ctrlr,
+ const u32 *intspec, unsigned int intsize,
+ unsigned long *out_hwirq, unsigned int *out_type)
+{
+ if (WARN_ON(intsize < 1))
+ return -EINVAL;
+
+ *out_hwirq = evt2irq(intspec[0]);
+ *out_type = IRQ_TYPE_NONE;
+
+ return 0;
+}
+
+static const struct irq_domain_ops intc_evt_ops = {
+ .xlate = intc_evt_xlate,
+};
+
+void __init intc_irq_domain_init(struct intc_desc_int *d,
+ struct intc_hw_desc *hw)
+{
+ unsigned int irq_base, irq_end;
+
+ /*
+ * Quick linear revmap check
+ */
+ irq_base = evt2irq(hw->vectors[0].vect);
+ irq_end = evt2irq(hw->vectors[hw->nr_vectors - 1].vect);
+
+ /*
+ * Linear domains have a hard-wired assertion that IRQs start at
+ * 0 in order to make some performance optimizations. Lamely
+ * restrict the linear case to these conditions here, taking the
+ * tree penalty for linear cases with non-zero hwirq bases.
+ */
+ if (irq_base == 0 && irq_end == (irq_base + hw->nr_vectors - 1))
+ d->domain = irq_domain_add_linear(NULL, hw->nr_vectors,
+ &intc_evt_ops, NULL);
+ else
+ d->domain = irq_domain_add_tree(NULL, &intc_evt_ops, NULL);
+
+ BUG_ON(!d->domain);
+}
diff --git a/drivers/sh/pfc/pinctrl.c b/drivers/sh/pfc/pinctrl.c
index 0802b6c..2804eaa 100644
--- a/drivers/sh/pfc/pinctrl.c
+++ b/drivers/sh/pfc/pinctrl.c
@@ -276,7 +276,6 @@
unsigned long config)
{
struct sh_pfc_pinctrl *pmx = pinctrl_dev_get_drvdata(pctldev);
- struct sh_pfc *pfc = pmx->pfc;
/* Validate the new type */
if (config >= PINMUX_FLAG_TYPE)
@@ -326,20 +325,6 @@
.confops = &sh_pfc_pinconf_ops,
};
-int sh_pfc_register_pinctrl(struct sh_pfc *pfc)
-{
- sh_pfc_pmx = kzalloc(sizeof(struct sh_pfc_pinctrl), GFP_KERNEL);
- if (unlikely(!sh_pfc_pmx))
- return -ENOMEM;
-
- spin_lock_init(&sh_pfc_pmx->lock);
-
- sh_pfc_pmx->pfc = pfc;
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(sh_pfc_register_pinctrl);
-
static inline void __devinit sh_pfc_map_one_gpio(struct sh_pfc *pfc,
struct sh_pfc_pinctrl *pmx,
struct pinmux_gpio *gpio,
@@ -481,7 +466,6 @@
{
struct sh_pfc_pinctrl *pmx = platform_get_drvdata(pdev);
- pinctrl_remove_gpio_range(pmx->pctl, &sh_pfc_gpio_range);
pinctrl_unregister(pmx->pctl);
platform_set_drvdata(pdev, NULL);
@@ -507,7 +491,7 @@
.id = -1,
};
-static int __init sh_pfc_pinctrl_init(void)
+static int sh_pfc_pinctrl_init(void)
{
int rc;
@@ -521,10 +505,22 @@
return rc;
}
+int sh_pfc_register_pinctrl(struct sh_pfc *pfc)
+{
+ sh_pfc_pmx = kzalloc(sizeof(struct sh_pfc_pinctrl), GFP_KERNEL);
+ if (unlikely(!sh_pfc_pmx))
+ return -ENOMEM;
+
+ spin_lock_init(&sh_pfc_pmx->lock);
+
+ sh_pfc_pmx->pfc = pfc;
+
+ return sh_pfc_pinctrl_init();
+}
+EXPORT_SYMBOL_GPL(sh_pfc_register_pinctrl);
+
static void __exit sh_pfc_pinctrl_exit(void)
{
platform_driver_unregister(&sh_pfc_pinctrl_driver);
}
-
-subsys_initcall(sh_pfc_pinctrl_init);
module_exit(sh_pfc_pinctrl_exit);
diff --git a/drivers/staging/olpc_dcon/olpc_dcon.c b/drivers/staging/olpc_dcon/olpc_dcon.c
index 992275c..2c4bd74 100644
--- a/drivers/staging/olpc_dcon/olpc_dcon.c
+++ b/drivers/staging/olpc_dcon/olpc_dcon.c
@@ -27,6 +27,7 @@
#include <linux/uaccess.h>
#include <linux/ctype.h>
#include <linux/reboot.h>
+#include <linux/olpc-ec.h>
#include <asm/tsc.h>
#include <asm/olpc.h>
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index d4d8c94..9be296c 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -25,6 +25,7 @@
#include <linux/module.h>
#include <linux/errno.h>
+#include <linux/sh_dma.h>
#include <linux/timer.h>
#include <linux/interrupt.h>
#include <linux/tty.h>
@@ -1410,8 +1411,8 @@
/* Handle incomplete DMA receive */
struct tty_struct *tty = port->state->port.tty;
struct dma_chan *chan = s->chan_rx;
- struct sh_desc *sh_desc = container_of(desc, struct sh_desc,
- async_tx);
+ struct shdma_desc *sh_desc = container_of(desc,
+ struct shdma_desc, async_tx);
unsigned long flags;
int count;
diff --git a/drivers/usb/early/ehci-dbgp.c b/drivers/usb/early/ehci-dbgp.c
index ee0ebac..89dcf15 100644
--- a/drivers/usb/early/ehci-dbgp.c
+++ b/drivers/usb/early/ehci-dbgp.c
@@ -450,7 +450,7 @@
writel(FLAG_CF, &ehci_regs->configured_flag);
/* Wait until the controller is no longer halted */
- loop = 10;
+ loop = 1000;
do {
status = readl(&ehci_regs->status);
if (!(status & STS_HALT))
diff --git a/drivers/watchdog/orion_wdt.c b/drivers/watchdog/orion_wdt.c
index a73bea4..c20f96b 100644
--- a/drivers/watchdog/orion_wdt.c
+++ b/drivers/watchdog/orion_wdt.c
@@ -24,6 +24,7 @@
#include <linux/spinlock.h>
#include <linux/clk.h>
#include <linux/err.h>
+#include <linux/of.h>
#include <mach/bridge-regs.h>
/*
@@ -192,6 +193,12 @@
orion_wdt_stop(&orion_wdt);
}
+static const struct of_device_id orion_wdt_of_match_table[] __devinitdata = {
+ { .compatible = "marvell,orion-wdt", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, orion_wdt_of_match_table);
+
static struct platform_driver orion_wdt_driver = {
.probe = orion_wdt_probe,
.remove = __devexit_p(orion_wdt_remove),
@@ -199,6 +206,7 @@
.driver = {
.owner = THIS_MODULE,
.name = "orion_wdt",
+ .of_match_table = of_match_ptr(orion_wdt_of_match_table),
},
};
diff --git a/drivers/zorro/zorro.c b/drivers/zorro/zorro.c
index 181fa81..858c971 100644
--- a/drivers/zorro/zorro.c
+++ b/drivers/zorro/zorro.c
@@ -37,7 +37,6 @@
*/
struct zorro_bus {
- struct list_head devices; /* list of devices on this bus */
struct device dev;
};
@@ -136,7 +135,6 @@
if (!bus)
return -ENOMEM;
- INIT_LIST_HEAD(&bus->devices);
bus->dev.parent = &pdev->dev;
dev_set_name(&bus->dev, "zorro");
error = device_register(&bus->dev);
diff --git a/fs/bio.c b/fs/bio.c
index 73922ab..5eaa70c 100644
--- a/fs/bio.c
+++ b/fs/bio.c
@@ -1312,7 +1312,7 @@
* Note that this code is very hard to test under normal circumstances because
* direct-io pins the pages with get_user_pages(). This makes
* is_page_cache_freeable return false, and the VM will not clean the pages.
- * But other code (eg, pdflush) could clean the pages if they are mapped
+ * But other code (eg, flusher threads) could clean the pages if they are mapped
* pagecache.
*
* Simply disabling the call to bio_set_pages_dirty() is a good way to test the
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index 83baec2..6e8f416 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -324,7 +324,8 @@
* If this code finds it can't get good compression, it puts an
* entry onto the work queue to write the uncompressed bytes. This
* makes sure that both compressed inodes and uncompressed inodes
- * are written in the same order that pdflush sent them down.
+ * are written in the same order that the flusher thread sent them
+ * down.
*/
static noinline int compress_file_range(struct inode *inode,
struct page *locked_page,
diff --git a/fs/btrfs/ordered-data.c b/fs/btrfs/ordered-data.c
index 643335a..051c7fe 100644
--- a/fs/btrfs/ordered-data.c
+++ b/fs/btrfs/ordered-data.c
@@ -596,7 +596,7 @@
/*
* pages in the range can be dirty, clean or writeback. We
* start IO on any dirty ones so the wait doesn't stall waiting
- * for pdflush to find them
+ * for the flusher thread to find them
*/
if (!test_bit(BTRFS_ORDERED_DIRECT, &entry->flags))
filemap_fdatawrite_range(inode->i_mapping, start, end);
diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c
index 8c6e61d..f2eb24c 100644
--- a/fs/btrfs/super.c
+++ b/fs/btrfs/super.c
@@ -100,10 +100,6 @@
fs_info->fs_state = BTRFS_SUPER_FLAG_ERROR;
}
-/* NOTE:
- * We move write_super stuff at umount in order to avoid deadlock
- * for umount hold all lock.
- */
static void save_error_info(struct btrfs_fs_info *fs_info)
{
__save_error_info(fs_info);
diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
index b8708f9..e86ae04 100644
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -1744,10 +1744,6 @@
device->fs_devices = root->fs_info->fs_devices;
- /*
- * we don't want write_supers to jump in here with our device
- * half setup
- */
mutex_lock(&root->fs_info->fs_devices->device_list_mutex);
list_add_rcu(&device->dev_list, &root->fs_info->fs_devices->devices);
list_add(&device->dev_alloc_list,
diff --git a/fs/ceph/dir.c b/fs/ceph/dir.c
index f391f1e..e5b7731 100644
--- a/fs/ceph/dir.c
+++ b/fs/ceph/dir.c
@@ -633,44 +633,6 @@
return dentry;
}
-int ceph_atomic_open(struct inode *dir, struct dentry *dentry,
- struct file *file, unsigned flags, umode_t mode,
- int *opened)
-{
- int err;
- struct dentry *res = NULL;
-
- if (!(flags & O_CREAT)) {
- if (dentry->d_name.len > NAME_MAX)
- return -ENAMETOOLONG;
-
- err = ceph_init_dentry(dentry);
- if (err < 0)
- return err;
-
- return ceph_lookup_open(dir, dentry, file, flags, mode, opened);
- }
-
- if (d_unhashed(dentry)) {
- res = ceph_lookup(dir, dentry, 0);
- if (IS_ERR(res))
- return PTR_ERR(res);
-
- if (res)
- dentry = res;
- }
-
- /* We don't deal with positive dentries here */
- if (dentry->d_inode)
- return finish_no_open(file, res);
-
- *opened |= FILE_CREATED;
- err = ceph_lookup_open(dir, dentry, file, flags, mode, opened);
- dput(res);
-
- return err;
-}
-
/*
* If we do a create but get no trace back from the MDS, follow up with
* a lookup (the VFS expects us to link up the provided dentry).
diff --git a/fs/ceph/file.c b/fs/ceph/file.c
index 1b81d6c..ecebbc0 100644
--- a/fs/ceph/file.c
+++ b/fs/ceph/file.c
@@ -4,6 +4,7 @@
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/file.h>
+#include <linux/mount.h>
#include <linux/namei.h>
#include <linux/writeback.h>
@@ -106,9 +107,6 @@
}
/*
- * If the filp already has private_data, that means the file was
- * already opened by intent during lookup, and we do nothing.
- *
* If we already have the requisite capabilities, we can satisfy
* the open request locally (no need to request new caps from the
* MDS). We do, however, need to inform the MDS (asynchronously)
@@ -207,24 +205,29 @@
/*
- * Do a lookup + open with a single request.
- *
- * If this succeeds, but some subsequent check in the vfs
- * may_open() fails, the struct *file gets cleaned up (i.e.
- * ceph_release gets called). So fear not!
+ * Do a lookup + open with a single request. If we get a non-existent
+ * file or symlink, return 1 so the VFS can retry.
*/
-int ceph_lookup_open(struct inode *dir, struct dentry *dentry,
+int ceph_atomic_open(struct inode *dir, struct dentry *dentry,
struct file *file, unsigned flags, umode_t mode,
int *opened)
{
struct ceph_fs_client *fsc = ceph_sb_to_client(dir->i_sb);
struct ceph_mds_client *mdsc = fsc->mdsc;
struct ceph_mds_request *req;
- struct dentry *ret;
+ struct dentry *dn;
int err;
- dout("ceph_lookup_open dentry %p '%.*s' flags %d mode 0%o\n",
- dentry, dentry->d_name.len, dentry->d_name.name, flags, mode);
+ dout("atomic_open %p dentry %p '%.*s' %s flags %d mode 0%o\n",
+ dir, dentry, dentry->d_name.len, dentry->d_name.name,
+ d_unhashed(dentry) ? "unhashed" : "hashed", flags, mode);
+
+ if (dentry->d_name.len > NAME_MAX)
+ return -ENAMETOOLONG;
+
+ err = ceph_init_dentry(dentry);
+ if (err < 0)
+ return err;
/* do the open */
req = prepare_open_request(dir->i_sb, flags, mode);
@@ -241,22 +244,31 @@
(flags & (O_CREAT|O_TRUNC)) ? dir : NULL,
req);
err = ceph_handle_snapdir(req, dentry, err);
- if (err)
- goto out;
- if ((flags & O_CREAT) && !req->r_reply_info.head->is_dentry)
+ if (err == 0 && (flags & O_CREAT) && !req->r_reply_info.head->is_dentry)
err = ceph_handle_notrace_create(dir, dentry);
+
+ if (d_unhashed(dentry)) {
+ dn = ceph_finish_lookup(req, dentry, err);
+ if (IS_ERR(dn))
+ err = PTR_ERR(dn);
+ } else {
+ /* we were given a hashed negative dentry */
+ dn = NULL;
+ }
if (err)
- goto out;
- err = finish_open(file, req->r_dentry, ceph_open, opened);
-out:
- ret = ceph_finish_lookup(req, dentry, err);
+ goto out_err;
+ if (dn || dentry->d_inode == NULL || S_ISLNK(dentry->d_inode->i_mode)) {
+ /* make vfs retry on splice, ENOENT, or symlink */
+ dout("atomic_open finish_no_open on dn %p\n", dn);
+ err = finish_no_open(file, dn);
+ } else {
+ dout("atomic_open finish_open on dn %p\n", dn);
+ err = finish_open(file, dentry, ceph_open, opened);
+ }
+
+out_err:
ceph_mdsc_put_request(req);
- dout("ceph_lookup_open result=%p\n", ret);
-
- if (IS_ERR(ret))
- return PTR_ERR(ret);
-
- dput(ret);
+ dout("atomic_open result=%d\n", err);
return err;
}
diff --git a/fs/ceph/super.h b/fs/ceph/super.h
index ebc95cc..66ebe72 100644
--- a/fs/ceph/super.h
+++ b/fs/ceph/super.h
@@ -806,9 +806,9 @@
loff_t off, size_t len);
extern struct page **ceph_alloc_page_vector(int num_pages, gfp_t flags);
extern int ceph_open(struct inode *inode, struct file *file);
-extern int ceph_lookup_open(struct inode *dir, struct dentry *dentry,
- struct file *od, unsigned flags,
- umode_t mode, int *opened);
+extern int ceph_atomic_open(struct inode *dir, struct dentry *dentry,
+ struct file *file, unsigned flags, umode_t mode,
+ int *opened);
extern int ceph_release(struct inode *inode, struct file *filp);
/* dir.c */
diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h
index 497da5c..977dc0e 100644
--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -246,6 +246,16 @@
bool (*can_echo)(struct TCP_Server_Info *);
/* send echo request */
int (*echo)(struct TCP_Server_Info *);
+ /* create directory */
+ int (*mkdir)(const unsigned int, struct cifs_tcon *, const char *,
+ struct cifs_sb_info *);
+ /* set info on created directory */
+ void (*mkdir_setinfo)(struct inode *, const char *,
+ struct cifs_sb_info *, struct cifs_tcon *,
+ const unsigned int);
+ /* remove directory */
+ int (*rmdir)(const unsigned int, struct cifs_tcon *, const char *,
+ struct cifs_sb_info *);
};
struct smb_version_values {
diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h
index cf7fb18..f1bbf83 100644
--- a/fs/cifs/cifsproto.h
+++ b/fs/cifs/cifsproto.h
@@ -289,18 +289,15 @@
u16 fid, u32 pid_of_opener);
extern int CIFSSMBUnixSetPathInfo(const unsigned int xid,
- struct cifs_tcon *tcon, char *file_name,
+ struct cifs_tcon *tcon, const char *file_name,
const struct cifs_unix_set_info_args *args,
const struct nls_table *nls_codepage,
- int remap_special_chars);
+ int remap);
extern int CIFSSMBMkDir(const unsigned int xid, struct cifs_tcon *tcon,
- const char *newName,
- const struct nls_table *nls_codepage,
- int remap_special_chars);
+ const char *name, struct cifs_sb_info *cifs_sb);
extern int CIFSSMBRmDir(const unsigned int xid, struct cifs_tcon *tcon,
- const char *name, const struct nls_table *nls_codepage,
- int remap_special_chars);
+ const char *name, struct cifs_sb_info *cifs_sb);
extern int CIFSPOSIXDelFile(const unsigned int xid, struct cifs_tcon *tcon,
const char *name, __u16 type,
const struct nls_table *nls_codepage,
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index cabc7a0..074923c 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -948,15 +948,15 @@
}
int
-CIFSSMBRmDir(const unsigned int xid, struct cifs_tcon *tcon,
- const char *dirName, const struct nls_table *nls_codepage,
- int remap)
+CIFSSMBRmDir(const unsigned int xid, struct cifs_tcon *tcon, const char *name,
+ struct cifs_sb_info *cifs_sb)
{
DELETE_DIRECTORY_REQ *pSMB = NULL;
DELETE_DIRECTORY_RSP *pSMBr = NULL;
int rc = 0;
int bytes_returned;
int name_len;
+ int remap = cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR;
cFYI(1, "In CIFSSMBRmDir");
RmDirRetry:
@@ -966,14 +966,15 @@
return rc;
if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
- name_len = cifsConvertToUTF16((__le16 *) pSMB->DirName, dirName,
- PATH_MAX, nls_codepage, remap);
+ name_len = cifsConvertToUTF16((__le16 *) pSMB->DirName, name,
+ PATH_MAX, cifs_sb->local_nls,
+ remap);
name_len++; /* trailing null */
name_len *= 2;
} else { /* BB improve check for buffer overruns BB */
- name_len = strnlen(dirName, PATH_MAX);
+ name_len = strnlen(name, PATH_MAX);
name_len++; /* trailing null */
- strncpy(pSMB->DirName, dirName, name_len);
+ strncpy(pSMB->DirName, name, name_len);
}
pSMB->BufferFormat = 0x04;
@@ -992,14 +993,15 @@
}
int
-CIFSSMBMkDir(const unsigned int xid, struct cifs_tcon *tcon,
- const char *name, const struct nls_table *nls_codepage, int remap)
+CIFSSMBMkDir(const unsigned int xid, struct cifs_tcon *tcon, const char *name,
+ struct cifs_sb_info *cifs_sb)
{
int rc = 0;
CREATE_DIRECTORY_REQ *pSMB = NULL;
CREATE_DIRECTORY_RSP *pSMBr = NULL;
int bytes_returned;
int name_len;
+ int remap = cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR;
cFYI(1, "In CIFSSMBMkDir");
MkDirRetry:
@@ -1010,7 +1012,8 @@
if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
name_len = cifsConvertToUTF16((__le16 *) pSMB->DirName, name,
- PATH_MAX, nls_codepage, remap);
+ PATH_MAX, cifs_sb->local_nls,
+ remap);
name_len++; /* trailing null */
name_len *= 2;
} else { /* BB improve check for buffer overruns BB */
@@ -5943,7 +5946,7 @@
int
CIFSSMBUnixSetPathInfo(const unsigned int xid, struct cifs_tcon *tcon,
- char *fileName,
+ const char *file_name,
const struct cifs_unix_set_info_args *args,
const struct nls_table *nls_codepage, int remap)
{
@@ -5964,14 +5967,14 @@
if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
name_len =
- cifsConvertToUTF16((__le16 *) pSMB->FileName, fileName,
+ cifsConvertToUTF16((__le16 *) pSMB->FileName, file_name,
PATH_MAX, nls_codepage, remap);
name_len++; /* trailing null */
name_len *= 2;
} else { /* BB improve the check for buffer overruns BB */
- name_len = strnlen(fileName, PATH_MAX);
+ name_len = strnlen(file_name, PATH_MAX);
name_len++; /* trailing null */
- strncpy(pSMB->FileName, fileName, name_len);
+ strncpy(pSMB->FileName, file_name, name_len);
}
params = 6 + name_len;
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index 35cb6a3..7354877 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -1219,16 +1219,153 @@
return rc;
}
+static int
+cifs_mkdir_qinfo(struct inode *inode, struct dentry *dentry, umode_t mode,
+ const char *full_path, struct cifs_sb_info *cifs_sb,
+ struct cifs_tcon *tcon, const unsigned int xid)
+{
+ int rc = 0;
+ struct inode *newinode = NULL;
+
+ if (tcon->unix_ext)
+ rc = cifs_get_inode_info_unix(&newinode, full_path, inode->i_sb,
+ xid);
+ else
+ rc = cifs_get_inode_info(&newinode, full_path, NULL,
+ inode->i_sb, xid, NULL);
+ if (rc)
+ return rc;
+
+ d_instantiate(dentry, newinode);
+ /*
+ * setting nlink not necessary except in cases where we failed to get it
+ * from the server or was set bogus
+ */
+ if ((dentry->d_inode) && (dentry->d_inode->i_nlink < 2))
+ set_nlink(dentry->d_inode, 2);
+
+ mode &= ~current_umask();
+ /* must turn on setgid bit if parent dir has it */
+ if (inode->i_mode & S_ISGID)
+ mode |= S_ISGID;
+
+ if (tcon->unix_ext) {
+ struct cifs_unix_set_info_args args = {
+ .mode = mode,
+ .ctime = NO_CHANGE_64,
+ .atime = NO_CHANGE_64,
+ .mtime = NO_CHANGE_64,
+ .device = 0,
+ };
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID) {
+ args.uid = (__u64)current_fsuid();
+ if (inode->i_mode & S_ISGID)
+ args.gid = (__u64)inode->i_gid;
+ else
+ args.gid = (__u64)current_fsgid();
+ } else {
+ args.uid = NO_CHANGE_64;
+ args.gid = NO_CHANGE_64;
+ }
+ CIFSSMBUnixSetPathInfo(xid, tcon, full_path, &args,
+ cifs_sb->local_nls,
+ cifs_sb->mnt_cifs_flags &
+ CIFS_MOUNT_MAP_SPECIAL_CHR);
+ } else {
+ struct TCP_Server_Info *server = tcon->ses->server;
+ if (!(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL) &&
+ (mode & S_IWUGO) == 0 && server->ops->mkdir_setinfo)
+ server->ops->mkdir_setinfo(newinode, full_path, cifs_sb,
+ tcon, xid);
+ if (dentry->d_inode) {
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DYNPERM)
+ dentry->d_inode->i_mode = (mode | S_IFDIR);
+
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID) {
+ dentry->d_inode->i_uid = current_fsuid();
+ if (inode->i_mode & S_ISGID)
+ dentry->d_inode->i_gid = inode->i_gid;
+ else
+ dentry->d_inode->i_gid =
+ current_fsgid();
+ }
+ }
+ }
+ return rc;
+}
+
+static int
+cifs_posix_mkdir(struct inode *inode, struct dentry *dentry, umode_t mode,
+ const char *full_path, struct cifs_sb_info *cifs_sb,
+ struct cifs_tcon *tcon, const unsigned int xid)
+{
+ int rc = 0;
+ u32 oplock = 0;
+ FILE_UNIX_BASIC_INFO *info = NULL;
+ struct inode *newinode = NULL;
+ struct cifs_fattr fattr;
+
+ info = kzalloc(sizeof(FILE_UNIX_BASIC_INFO), GFP_KERNEL);
+ if (info == NULL) {
+ rc = -ENOMEM;
+ goto posix_mkdir_out;
+ }
+
+ mode &= ~current_umask();
+ rc = CIFSPOSIXCreate(xid, tcon, SMB_O_DIRECTORY | SMB_O_CREAT, mode,
+ NULL /* netfid */, info, &oplock, full_path,
+ cifs_sb->local_nls, cifs_sb->mnt_cifs_flags &
+ CIFS_MOUNT_MAP_SPECIAL_CHR);
+ if (rc == -EOPNOTSUPP)
+ goto posix_mkdir_out;
+ else if (rc) {
+ cFYI(1, "posix mkdir returned 0x%x", rc);
+ d_drop(dentry);
+ goto posix_mkdir_out;
+ }
+
+ if (info->Type == cpu_to_le32(-1))
+ /* no return info, go query for it */
+ goto posix_mkdir_get_info;
+ /*
+ * BB check (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID ) to see if
+ * need to set uid/gid.
+ */
+
+ cifs_unix_basic_to_fattr(&fattr, info, cifs_sb);
+ cifs_fill_uniqueid(inode->i_sb, &fattr);
+ newinode = cifs_iget(inode->i_sb, &fattr);
+ if (!newinode)
+ goto posix_mkdir_get_info;
+
+ d_instantiate(dentry, newinode);
+
+#ifdef CONFIG_CIFS_DEBUG2
+ cFYI(1, "instantiated dentry %p %s to inode %p", dentry,
+ dentry->d_name.name, newinode);
+
+ if (newinode->i_nlink != 2)
+ cFYI(1, "unexpected number of links %d", newinode->i_nlink);
+#endif
+
+posix_mkdir_out:
+ kfree(info);
+ return rc;
+posix_mkdir_get_info:
+ rc = cifs_mkdir_qinfo(inode, dentry, mode, full_path, cifs_sb, tcon,
+ xid);
+ goto posix_mkdir_out;
+}
+
int cifs_mkdir(struct inode *inode, struct dentry *direntry, umode_t mode)
{
- int rc = 0, tmprc;
+ int rc = 0;
unsigned int xid;
struct cifs_sb_info *cifs_sb;
struct tcon_link *tlink;
struct cifs_tcon *tcon;
- char *full_path = NULL;
- struct inode *newinode = NULL;
- struct cifs_fattr fattr;
+ struct TCP_Server_Info *server;
+ char *full_path;
cFYI(1, "In cifs_mkdir, mode = 0x%hx inode = 0x%p", mode, inode);
@@ -1248,145 +1385,29 @@
if (cap_unix(tcon->ses) && (CIFS_UNIX_POSIX_PATH_OPS_CAP &
le64_to_cpu(tcon->fsUnixInfo.Capability))) {
- u32 oplock = 0;
- FILE_UNIX_BASIC_INFO *pInfo =
- kzalloc(sizeof(FILE_UNIX_BASIC_INFO), GFP_KERNEL);
- if (pInfo == NULL) {
- rc = -ENOMEM;
+ rc = cifs_posix_mkdir(inode, direntry, mode, full_path, cifs_sb,
+ tcon, xid);
+ if (rc != -EOPNOTSUPP)
goto mkdir_out;
- }
+ }
- mode &= ~current_umask();
- rc = CIFSPOSIXCreate(xid, tcon, SMB_O_DIRECTORY | SMB_O_CREAT,
- mode, NULL /* netfid */, pInfo, &oplock,
- full_path, cifs_sb->local_nls,
- cifs_sb->mnt_cifs_flags &
- CIFS_MOUNT_MAP_SPECIAL_CHR);
- if (rc == -EOPNOTSUPP) {
- kfree(pInfo);
- goto mkdir_retry_old;
- } else if (rc) {
- cFYI(1, "posix mkdir returned 0x%x", rc);
- d_drop(direntry);
- } else {
- if (pInfo->Type == cpu_to_le32(-1)) {
- /* no return info, go query for it */
- kfree(pInfo);
- goto mkdir_get_info;
- }
-/*BB check (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID ) to see if need
- to set uid/gid */
+ server = tcon->ses->server;
- cifs_unix_basic_to_fattr(&fattr, pInfo, cifs_sb);
- cifs_fill_uniqueid(inode->i_sb, &fattr);
- newinode = cifs_iget(inode->i_sb, &fattr);
- if (!newinode) {
- kfree(pInfo);
- goto mkdir_get_info;
- }
-
- d_instantiate(direntry, newinode);
-
-#ifdef CONFIG_CIFS_DEBUG2
- cFYI(1, "instantiated dentry %p %s to inode %p",
- direntry, direntry->d_name.name, newinode);
-
- if (newinode->i_nlink != 2)
- cFYI(1, "unexpected number of links %d",
- newinode->i_nlink);
-#endif
- }
- kfree(pInfo);
+ if (!server->ops->mkdir) {
+ rc = -ENOSYS;
goto mkdir_out;
}
-mkdir_retry_old:
+
/* BB add setting the equivalent of mode via CreateX w/ACLs */
- rc = CIFSSMBMkDir(xid, tcon, full_path, cifs_sb->local_nls,
- cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR);
+ rc = server->ops->mkdir(xid, tcon, full_path, cifs_sb);
if (rc) {
cFYI(1, "cifs_mkdir returned 0x%x", rc);
d_drop(direntry);
- } else {
-mkdir_get_info:
- if (tcon->unix_ext)
- rc = cifs_get_inode_info_unix(&newinode, full_path,
- inode->i_sb, xid);
- else
- rc = cifs_get_inode_info(&newinode, full_path, NULL,
- inode->i_sb, xid, NULL);
-
- d_instantiate(direntry, newinode);
- /* setting nlink not necessary except in cases where we
- * failed to get it from the server or was set bogus */
- if ((direntry->d_inode) && (direntry->d_inode->i_nlink < 2))
- set_nlink(direntry->d_inode, 2);
-
- mode &= ~current_umask();
- /* must turn on setgid bit if parent dir has it */
- if (inode->i_mode & S_ISGID)
- mode |= S_ISGID;
-
- if (tcon->unix_ext) {
- struct cifs_unix_set_info_args args = {
- .mode = mode,
- .ctime = NO_CHANGE_64,
- .atime = NO_CHANGE_64,
- .mtime = NO_CHANGE_64,
- .device = 0,
- };
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID) {
- args.uid = (__u64)current_fsuid();
- if (inode->i_mode & S_ISGID)
- args.gid = (__u64)inode->i_gid;
- else
- args.gid = (__u64)current_fsgid();
- } else {
- args.uid = NO_CHANGE_64;
- args.gid = NO_CHANGE_64;
- }
- CIFSSMBUnixSetPathInfo(xid, tcon, full_path, &args,
- cifs_sb->local_nls,
- cifs_sb->mnt_cifs_flags &
- CIFS_MOUNT_MAP_SPECIAL_CHR);
- } else {
- if (!(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL) &&
- (mode & S_IWUGO) == 0) {
- FILE_BASIC_INFO pInfo;
- struct cifsInodeInfo *cifsInode;
- u32 dosattrs;
-
- memset(&pInfo, 0, sizeof(pInfo));
- cifsInode = CIFS_I(newinode);
- dosattrs = cifsInode->cifsAttrs|ATTR_READONLY;
- pInfo.Attributes = cpu_to_le32(dosattrs);
- tmprc = CIFSSMBSetPathInfo(xid, tcon,
- full_path, &pInfo,
- cifs_sb->local_nls,
- cifs_sb->mnt_cifs_flags &
- CIFS_MOUNT_MAP_SPECIAL_CHR);
- if (tmprc == 0)
- cifsInode->cifsAttrs = dosattrs;
- }
- if (direntry->d_inode) {
- if (cifs_sb->mnt_cifs_flags &
- CIFS_MOUNT_DYNPERM)
- direntry->d_inode->i_mode =
- (mode | S_IFDIR);
-
- if (cifs_sb->mnt_cifs_flags &
- CIFS_MOUNT_SET_UID) {
- direntry->d_inode->i_uid =
- current_fsuid();
- if (inode->i_mode & S_ISGID)
- direntry->d_inode->i_gid =
- inode->i_gid;
- else
- direntry->d_inode->i_gid =
- current_fsgid();
- }
- }
- }
+ goto mkdir_out;
}
+
+ rc = cifs_mkdir_qinfo(inode, direntry, mode, full_path, cifs_sb, tcon,
+ xid);
mkdir_out:
/*
* Force revalidate to get parent dir info when needed since cached
@@ -1405,7 +1426,8 @@
unsigned int xid;
struct cifs_sb_info *cifs_sb;
struct tcon_link *tlink;
- struct cifs_tcon *pTcon;
+ struct cifs_tcon *tcon;
+ struct TCP_Server_Info *server;
char *full_path = NULL;
struct cifsInodeInfo *cifsInode;
@@ -1425,10 +1447,16 @@
rc = PTR_ERR(tlink);
goto rmdir_exit;
}
- pTcon = tlink_tcon(tlink);
+ tcon = tlink_tcon(tlink);
+ server = tcon->ses->server;
- rc = CIFSSMBRmDir(xid, pTcon, full_path, cifs_sb->local_nls,
- cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR);
+ if (!server->ops->rmdir) {
+ rc = -ENOSYS;
+ cifs_put_tlink(tlink);
+ goto rmdir_exit;
+ }
+
+ rc = server->ops->rmdir(xid, tcon, full_path, cifs_sb);
cifs_put_tlink(tlink);
if (!rc) {
diff --git a/fs/cifs/smb1ops.c b/fs/cifs/smb1ops.c
index c40356d..3129ac7 100644
--- a/fs/cifs/smb1ops.c
+++ b/fs/cifs/smb1ops.c
@@ -586,6 +586,27 @@
#endif
}
+static void
+cifs_mkdir_setinfo(struct inode *inode, const char *full_path,
+ struct cifs_sb_info *cifs_sb, struct cifs_tcon *tcon,
+ const unsigned int xid)
+{
+ FILE_BASIC_INFO info;
+ struct cifsInodeInfo *cifsInode;
+ u32 dosattrs;
+ int rc;
+
+ memset(&info, 0, sizeof(info));
+ cifsInode = CIFS_I(inode);
+ dosattrs = cifsInode->cifsAttrs|ATTR_READONLY;
+ info.Attributes = cpu_to_le32(dosattrs);
+ rc = CIFSSMBSetPathInfo(xid, tcon, full_path, &info, cifs_sb->local_nls,
+ cifs_sb->mnt_cifs_flags &
+ CIFS_MOUNT_MAP_SPECIAL_CHR);
+ if (rc == 0)
+ cifsInode->cifsAttrs = dosattrs;
+}
+
struct smb_version_operations smb1_operations = {
.send_cancel = send_nt_cancel,
.compare_fids = cifs_compare_fids,
@@ -620,6 +641,9 @@
.get_srv_inum = cifs_get_srv_inum,
.build_path_to_root = cifs_build_path_to_root,
.echo = CIFSSMBEcho,
+ .mkdir = CIFSSMBMkDir,
+ .mkdir_setinfo = cifs_mkdir_setinfo,
+ .rmdir = CIFSSMBRmDir,
};
struct smb_version_values smb1_values = {
diff --git a/fs/cifs/smb2inode.c b/fs/cifs/smb2inode.c
index 1ba5c40..2aa5cb0 100644
--- a/fs/cifs/smb2inode.c
+++ b/fs/cifs/smb2inode.c
@@ -122,3 +122,42 @@
kfree(smb2_data);
return rc;
}
+
+int
+smb2_mkdir(const unsigned int xid, struct cifs_tcon *tcon, const char *name,
+ struct cifs_sb_info *cifs_sb)
+{
+ return smb2_open_op_close(xid, tcon, cifs_sb, name,
+ FILE_WRITE_ATTRIBUTES, FILE_CREATE, 0,
+ CREATE_NOT_FILE, NULL, SMB2_OP_MKDIR);
+}
+
+void
+smb2_mkdir_setinfo(struct inode *inode, const char *name,
+ struct cifs_sb_info *cifs_sb, struct cifs_tcon *tcon,
+ const unsigned int xid)
+{
+ FILE_BASIC_INFO data;
+ struct cifsInodeInfo *cifs_i;
+ u32 dosattrs;
+ int tmprc;
+
+ memset(&data, 0, sizeof(data));
+ cifs_i = CIFS_I(inode);
+ dosattrs = cifs_i->cifsAttrs | ATTR_READONLY;
+ data.Attributes = cpu_to_le32(dosattrs);
+ tmprc = smb2_open_op_close(xid, tcon, cifs_sb, name,
+ FILE_WRITE_ATTRIBUTES, FILE_CREATE, 0,
+ CREATE_NOT_FILE, &data, SMB2_OP_SET_INFO);
+ if (tmprc == 0)
+ cifs_i->cifsAttrs = dosattrs;
+}
+
+int
+smb2_rmdir(const unsigned int xid, struct cifs_tcon *tcon, const char *name,
+ struct cifs_sb_info *cifs_sb)
+{
+ return smb2_open_op_close(xid, tcon, cifs_sb, name, DELETE, FILE_OPEN,
+ 0, CREATE_NOT_FILE | CREATE_DELETE_ON_CLOSE,
+ NULL, SMB2_OP_DELETE);
+}
diff --git a/fs/cifs/smb2ops.c b/fs/cifs/smb2ops.c
index 410cf92..826209b 100644
--- a/fs/cifs/smb2ops.c
+++ b/fs/cifs/smb2ops.c
@@ -318,6 +318,9 @@
.query_path_info = smb2_query_path_info,
.get_srv_inum = smb2_get_srv_inum,
.build_path_to_root = smb2_build_path_to_root,
+ .mkdir = smb2_mkdir,
+ .mkdir_setinfo = smb2_mkdir_setinfo,
+ .rmdir = smb2_rmdir,
};
struct smb_version_values smb21_values = {
diff --git a/fs/cifs/smb2proto.h b/fs/cifs/smb2proto.h
index 902bbe2..bfaa7b1 100644
--- a/fs/cifs/smb2proto.h
+++ b/fs/cifs/smb2proto.h
@@ -52,6 +52,14 @@
struct cifs_sb_info *cifs_sb,
const char *full_path, FILE_ALL_INFO *data,
bool *adjust_tz);
+extern int smb2_mkdir(const unsigned int xid, struct cifs_tcon *tcon,
+ const char *name, struct cifs_sb_info *cifs_sb);
+extern void smb2_mkdir_setinfo(struct inode *inode, const char *full_path,
+ struct cifs_sb_info *cifs_sb,
+ struct cifs_tcon *tcon, const unsigned int xid);
+extern int smb2_rmdir(const unsigned int xid, struct cifs_tcon *tcon,
+ const char *name, struct cifs_sb_info *cifs_sb);
+
/*
* SMB2 Worker functions - most of protocol specific implementation details
* are contained within these calls.
diff --git a/fs/ecryptfs/ecryptfs_kernel.h b/fs/ecryptfs/ecryptfs_kernel.h
index 989e034..cfb4b9f 100644
--- a/fs/ecryptfs/ecryptfs_kernel.h
+++ b/fs/ecryptfs/ecryptfs_kernel.h
@@ -385,8 +385,6 @@
struct mutex mux;
};
-struct ecryptfs_daemon;
-
struct ecryptfs_daemon {
#define ECRYPTFS_DAEMON_IN_READ 0x00000001
#define ECRYPTFS_DAEMON_IN_POLL 0x00000002
@@ -394,10 +392,7 @@
#define ECRYPTFS_DAEMON_MISCDEV_OPEN 0x00000008
u32 flags;
u32 num_queued_msg_ctx;
- struct pid *pid;
- uid_t euid;
- struct user_namespace *user_ns;
- struct task_struct *task;
+ struct file *file;
struct mutex mux;
struct list_head msg_ctx_out_queue;
wait_queue_head_t wait;
@@ -554,6 +549,8 @@
struct inode *ecryptfs_get_inode(struct inode *lower_inode,
struct super_block *sb);
void ecryptfs_i_size_init(const char *page_virt, struct inode *inode);
+int ecryptfs_initialize_file(struct dentry *ecryptfs_dentry,
+ struct inode *ecryptfs_inode);
int ecryptfs_decode_and_decrypt_filename(char **decrypted_name,
size_t *decrypted_name_size,
struct dentry *ecryptfs_dentry,
@@ -607,13 +604,8 @@
ecryptfs_setxattr(struct dentry *dentry, const char *name, const void *value,
size_t size, int flags);
int ecryptfs_read_xattr_region(char *page_virt, struct inode *ecryptfs_inode);
-int ecryptfs_process_helo(uid_t euid, struct user_namespace *user_ns,
- struct pid *pid);
-int ecryptfs_process_quit(uid_t euid, struct user_namespace *user_ns,
- struct pid *pid);
-int ecryptfs_process_response(struct ecryptfs_message *msg, uid_t euid,
- struct user_namespace *user_ns, struct pid *pid,
- u32 seq);
+int ecryptfs_process_response(struct ecryptfs_daemon *daemon,
+ struct ecryptfs_message *msg, u32 seq);
int ecryptfs_send_message(char *data, int data_len,
struct ecryptfs_msg_ctx **msg_ctx);
int ecryptfs_wait_for_response(struct ecryptfs_msg_ctx *msg_ctx,
@@ -658,8 +650,7 @@
struct inode *ecryptfs_inode);
struct page *ecryptfs_get_locked_page(struct inode *inode, loff_t index);
int ecryptfs_exorcise_daemon(struct ecryptfs_daemon *daemon);
-int ecryptfs_find_daemon_by_euid(struct ecryptfs_daemon **daemon, uid_t euid,
- struct user_namespace *user_ns);
+int ecryptfs_find_daemon_by_euid(struct ecryptfs_daemon **daemon);
int ecryptfs_parse_packet_length(unsigned char *data, size_t *size,
size_t *length_size);
int ecryptfs_write_packet_length(char *dest, size_t size,
@@ -671,8 +662,7 @@
u16 msg_flags, struct ecryptfs_daemon *daemon);
void ecryptfs_msg_ctx_alloc_to_free(struct ecryptfs_msg_ctx *msg_ctx);
int
-ecryptfs_spawn_daemon(struct ecryptfs_daemon **daemon, uid_t euid,
- struct user_namespace *user_ns, struct pid *pid);
+ecryptfs_spawn_daemon(struct ecryptfs_daemon **daemon, struct file *file);
int ecryptfs_init_kthread(void);
void ecryptfs_destroy_kthread(void);
int ecryptfs_privileged_open(struct file **lower_file,
diff --git a/fs/ecryptfs/file.c b/fs/ecryptfs/file.c
index 2b17f2f..44ce5c6 100644
--- a/fs/ecryptfs/file.c
+++ b/fs/ecryptfs/file.c
@@ -138,29 +138,50 @@
return rc;
}
-static void ecryptfs_vma_close(struct vm_area_struct *vma)
-{
- filemap_write_and_wait(vma->vm_file->f_mapping);
-}
+struct kmem_cache *ecryptfs_file_info_cache;
-static const struct vm_operations_struct ecryptfs_file_vm_ops = {
- .close = ecryptfs_vma_close,
- .fault = filemap_fault,
-};
-
-static int ecryptfs_file_mmap(struct file *file, struct vm_area_struct *vma)
+static int read_or_initialize_metadata(struct dentry *dentry)
{
+ struct inode *inode = dentry->d_inode;
+ struct ecryptfs_mount_crypt_stat *mount_crypt_stat;
+ struct ecryptfs_crypt_stat *crypt_stat;
int rc;
- rc = generic_file_mmap(file, vma);
- if (!rc)
- vma->vm_ops = &ecryptfs_file_vm_ops;
+ crypt_stat = &ecryptfs_inode_to_private(inode)->crypt_stat;
+ mount_crypt_stat = &ecryptfs_superblock_to_private(
+ inode->i_sb)->mount_crypt_stat;
+ mutex_lock(&crypt_stat->cs_mutex);
+ if (crypt_stat->flags & ECRYPTFS_POLICY_APPLIED &&
+ crypt_stat->flags & ECRYPTFS_KEY_VALID) {
+ rc = 0;
+ goto out;
+ }
+
+ rc = ecryptfs_read_metadata(dentry);
+ if (!rc)
+ goto out;
+
+ if (mount_crypt_stat->flags & ECRYPTFS_PLAINTEXT_PASSTHROUGH_ENABLED) {
+ crypt_stat->flags &= ~(ECRYPTFS_I_SIZE_INITIALIZED
+ | ECRYPTFS_ENCRYPTED);
+ rc = 0;
+ goto out;
+ }
+
+ if (!(mount_crypt_stat->flags & ECRYPTFS_XATTR_METADATA_ENABLED) &&
+ !i_size_read(ecryptfs_inode_to_lower(inode))) {
+ rc = ecryptfs_initialize_file(dentry, inode);
+ if (!rc)
+ goto out;
+ }
+
+ rc = -EIO;
+out:
+ mutex_unlock(&crypt_stat->cs_mutex);
return rc;
}
-struct kmem_cache *ecryptfs_file_info_cache;
-
/**
* ecryptfs_open
* @inode: inode speciying file to open
@@ -236,32 +257,9 @@
rc = 0;
goto out;
}
- mutex_lock(&crypt_stat->cs_mutex);
- if (!(crypt_stat->flags & ECRYPTFS_POLICY_APPLIED)
- || !(crypt_stat->flags & ECRYPTFS_KEY_VALID)) {
- rc = ecryptfs_read_metadata(ecryptfs_dentry);
- if (rc) {
- ecryptfs_printk(KERN_DEBUG,
- "Valid headers not found\n");
- if (!(mount_crypt_stat->flags
- & ECRYPTFS_PLAINTEXT_PASSTHROUGH_ENABLED)) {
- rc = -EIO;
- printk(KERN_WARNING "Either the lower file "
- "is not in a valid eCryptfs format, "
- "or the key could not be retrieved. "
- "Plaintext passthrough mode is not "
- "enabled; returning -EIO\n");
- mutex_unlock(&crypt_stat->cs_mutex);
- goto out_put;
- }
- rc = 0;
- crypt_stat->flags &= ~(ECRYPTFS_I_SIZE_INITIALIZED
- | ECRYPTFS_ENCRYPTED);
- mutex_unlock(&crypt_stat->cs_mutex);
- goto out;
- }
- }
- mutex_unlock(&crypt_stat->cs_mutex);
+ rc = read_or_initialize_metadata(ecryptfs_dentry);
+ if (rc)
+ goto out_put;
ecryptfs_printk(KERN_DEBUG, "inode w/ addr = [0x%p], i_ino = "
"[0x%.16lx] size: [0x%.16llx]\n", inode, inode->i_ino,
(unsigned long long)i_size_read(inode));
@@ -292,15 +290,7 @@
static int
ecryptfs_fsync(struct file *file, loff_t start, loff_t end, int datasync)
{
- int rc = 0;
-
- rc = generic_file_fsync(file, start, end, datasync);
- if (rc)
- goto out;
- rc = vfs_fsync_range(ecryptfs_file_to_lower(file), start, end,
- datasync);
-out:
- return rc;
+ return vfs_fsync(ecryptfs_file_to_lower(file), datasync);
}
static int ecryptfs_fasync(int fd, struct file *file, int flag)
@@ -369,7 +359,7 @@
#ifdef CONFIG_COMPAT
.compat_ioctl = ecryptfs_compat_ioctl,
#endif
- .mmap = ecryptfs_file_mmap,
+ .mmap = generic_file_mmap,
.open = ecryptfs_open,
.flush = ecryptfs_flush,
.release = ecryptfs_release,
diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c
index c3ca12c..534b129 100644
--- a/fs/ecryptfs/inode.c
+++ b/fs/ecryptfs/inode.c
@@ -143,6 +143,31 @@
return 0;
}
+static int ecryptfs_do_unlink(struct inode *dir, struct dentry *dentry,
+ struct inode *inode)
+{
+ struct dentry *lower_dentry = ecryptfs_dentry_to_lower(dentry);
+ struct inode *lower_dir_inode = ecryptfs_inode_to_lower(dir);
+ struct dentry *lower_dir_dentry;
+ int rc;
+
+ dget(lower_dentry);
+ lower_dir_dentry = lock_parent(lower_dentry);
+ rc = vfs_unlink(lower_dir_inode, lower_dentry);
+ if (rc) {
+ printk(KERN_ERR "Error in vfs_unlink; rc = [%d]\n", rc);
+ goto out_unlock;
+ }
+ fsstack_copy_attr_times(dir, lower_dir_inode);
+ set_nlink(inode, ecryptfs_inode_to_lower(inode)->i_nlink);
+ inode->i_ctime = dir->i_ctime;
+ d_drop(dentry);
+out_unlock:
+ unlock_dir(lower_dir_dentry);
+ dput(lower_dentry);
+ return rc;
+}
+
/**
* ecryptfs_do_create
* @directory_inode: inode of the new file's dentry's parent in ecryptfs
@@ -182,8 +207,10 @@
}
inode = __ecryptfs_get_inode(lower_dentry->d_inode,
directory_inode->i_sb);
- if (IS_ERR(inode))
+ if (IS_ERR(inode)) {
+ vfs_unlink(lower_dir_dentry->d_inode, lower_dentry);
goto out_lock;
+ }
fsstack_copy_attr_times(directory_inode, lower_dir_dentry->d_inode);
fsstack_copy_inode_size(directory_inode, lower_dir_dentry->d_inode);
out_lock:
@@ -200,8 +227,8 @@
*
* Returns zero on success
*/
-static int ecryptfs_initialize_file(struct dentry *ecryptfs_dentry,
- struct inode *ecryptfs_inode)
+int ecryptfs_initialize_file(struct dentry *ecryptfs_dentry,
+ struct inode *ecryptfs_inode)
{
struct ecryptfs_crypt_stat *crypt_stat =
&ecryptfs_inode_to_private(ecryptfs_inode)->crypt_stat;
@@ -264,7 +291,9 @@
* that this on disk file is prepared to be an ecryptfs file */
rc = ecryptfs_initialize_file(ecryptfs_dentry, ecryptfs_inode);
if (rc) {
- drop_nlink(ecryptfs_inode);
+ ecryptfs_do_unlink(directory_inode, ecryptfs_dentry,
+ ecryptfs_inode);
+ make_bad_inode(ecryptfs_inode);
unlock_new_inode(ecryptfs_inode);
iput(ecryptfs_inode);
goto out;
@@ -466,27 +495,7 @@
static int ecryptfs_unlink(struct inode *dir, struct dentry *dentry)
{
- int rc = 0;
- struct dentry *lower_dentry = ecryptfs_dentry_to_lower(dentry);
- struct inode *lower_dir_inode = ecryptfs_inode_to_lower(dir);
- struct dentry *lower_dir_dentry;
-
- dget(lower_dentry);
- lower_dir_dentry = lock_parent(lower_dentry);
- rc = vfs_unlink(lower_dir_inode, lower_dentry);
- if (rc) {
- printk(KERN_ERR "Error in vfs_unlink; rc = [%d]\n", rc);
- goto out_unlock;
- }
- fsstack_copy_attr_times(dir, lower_dir_inode);
- set_nlink(dentry->d_inode,
- ecryptfs_inode_to_lower(dentry->d_inode)->i_nlink);
- dentry->d_inode->i_ctime = dir->i_ctime;
- d_drop(dentry);
-out_unlock:
- unlock_dir(lower_dir_dentry);
- dput(lower_dentry);
- return rc;
+ return ecryptfs_do_unlink(dir, dentry, dentry->d_inode);
}
static int ecryptfs_symlink(struct inode *dir, struct dentry *dentry,
@@ -961,12 +970,6 @@
goto out;
}
- if (S_ISREG(inode->i_mode)) {
- rc = filemap_write_and_wait(inode->i_mapping);
- if (rc)
- goto out;
- fsstack_copy_attr_all(inode, lower_inode);
- }
memcpy(&lower_ia, ia, sizeof(lower_ia));
if (ia->ia_valid & ATTR_FILE)
lower_ia.ia_file = ecryptfs_file_to_lower(ia->ia_file);
diff --git a/fs/ecryptfs/main.c b/fs/ecryptfs/main.c
index 1c0b3b6..2768138 100644
--- a/fs/ecryptfs/main.c
+++ b/fs/ecryptfs/main.c
@@ -279,6 +279,7 @@
char *fnek_src;
char *cipher_key_bytes_src;
char *fn_cipher_key_bytes_src;
+ u8 cipher_code;
*check_ruid = 0;
@@ -420,6 +421,18 @@
&& !fn_cipher_key_bytes_set)
mount_crypt_stat->global_default_fn_cipher_key_bytes =
mount_crypt_stat->global_default_cipher_key_size;
+
+ cipher_code = ecryptfs_code_for_cipher_string(
+ mount_crypt_stat->global_default_cipher_name,
+ mount_crypt_stat->global_default_cipher_key_size);
+ if (!cipher_code) {
+ ecryptfs_printk(KERN_ERR,
+ "eCryptfs doesn't support cipher: %s",
+ mount_crypt_stat->global_default_cipher_name);
+ rc = -EINVAL;
+ goto out;
+ }
+
mutex_lock(&key_tfm_list_mutex);
if (!ecryptfs_tfm_exists(mount_crypt_stat->global_default_cipher_name,
NULL)) {
@@ -540,6 +553,15 @@
}
ecryptfs_set_superblock_lower(s, path.dentry->d_sb);
+
+ /**
+ * Set the POSIX ACL flag based on whether they're enabled in the lower
+ * mount. Force a read-only eCryptfs mount if the lower mount is ro.
+ * Allow a ro eCryptfs mount even when the lower mount is rw.
+ */
+ s->s_flags = flags & ~MS_POSIXACL;
+ s->s_flags |= path.dentry->d_sb->s_flags & (MS_RDONLY | MS_POSIXACL);
+
s->s_maxbytes = path.dentry->d_sb->s_maxbytes;
s->s_blocksize = path.dentry->d_sb->s_blocksize;
s->s_magic = ECRYPTFS_SUPER_MAGIC;
diff --git a/fs/ecryptfs/messaging.c b/fs/ecryptfs/messaging.c
index a750f95..b29bb8b 100644
--- a/fs/ecryptfs/messaging.c
+++ b/fs/ecryptfs/messaging.c
@@ -32,8 +32,8 @@
static struct hlist_head *ecryptfs_daemon_hash;
struct mutex ecryptfs_daemon_hash_mux;
static int ecryptfs_hash_bits;
-#define ecryptfs_uid_hash(uid) \
- hash_long((unsigned long)uid, ecryptfs_hash_bits)
+#define ecryptfs_current_euid_hash(uid) \
+ hash_long((unsigned long)current_euid(), ecryptfs_hash_bits)
static u32 ecryptfs_msg_counter;
static struct ecryptfs_msg_ctx *ecryptfs_msg_ctx_arr;
@@ -105,26 +105,24 @@
/**
* ecryptfs_find_daemon_by_euid
- * @euid: The effective user id which maps to the desired daemon id
- * @user_ns: The namespace in which @euid applies
* @daemon: If return value is zero, points to the desired daemon pointer
*
* Must be called with ecryptfs_daemon_hash_mux held.
*
- * Search the hash list for the given user id.
+ * Search the hash list for the current effective user id.
*
* Returns zero if the user id exists in the list; non-zero otherwise.
*/
-int ecryptfs_find_daemon_by_euid(struct ecryptfs_daemon **daemon, uid_t euid,
- struct user_namespace *user_ns)
+int ecryptfs_find_daemon_by_euid(struct ecryptfs_daemon **daemon)
{
struct hlist_node *elem;
int rc;
hlist_for_each_entry(*daemon, elem,
- &ecryptfs_daemon_hash[ecryptfs_uid_hash(euid)],
- euid_chain) {
- if ((*daemon)->euid == euid && (*daemon)->user_ns == user_ns) {
+ &ecryptfs_daemon_hash[ecryptfs_current_euid_hash()],
+ euid_chain) {
+ if ((*daemon)->file->f_cred->euid == current_euid() &&
+ (*daemon)->file->f_cred->user_ns == current_user_ns()) {
rc = 0;
goto out;
}
@@ -137,9 +135,7 @@
/**
* ecryptfs_spawn_daemon - Create and initialize a new daemon struct
* @daemon: Pointer to set to newly allocated daemon struct
- * @euid: Effective user id for the daemon
- * @user_ns: The namespace in which @euid applies
- * @pid: Process id for the daemon
+ * @file: File used when opening /dev/ecryptfs
*
* Must be called ceremoniously while in possession of
* ecryptfs_sacred_daemon_hash_mux
@@ -147,8 +143,7 @@
* Returns zero on success; non-zero otherwise
*/
int
-ecryptfs_spawn_daemon(struct ecryptfs_daemon **daemon, uid_t euid,
- struct user_namespace *user_ns, struct pid *pid)
+ecryptfs_spawn_daemon(struct ecryptfs_daemon **daemon, struct file *file)
{
int rc = 0;
@@ -159,16 +154,13 @@
"GFP_KERNEL memory\n", __func__, sizeof(**daemon));
goto out;
}
- (*daemon)->euid = euid;
- (*daemon)->user_ns = get_user_ns(user_ns);
- (*daemon)->pid = get_pid(pid);
- (*daemon)->task = current;
+ (*daemon)->file = file;
mutex_init(&(*daemon)->mux);
INIT_LIST_HEAD(&(*daemon)->msg_ctx_out_queue);
init_waitqueue_head(&(*daemon)->wait);
(*daemon)->num_queued_msg_ctx = 0;
hlist_add_head(&(*daemon)->euid_chain,
- &ecryptfs_daemon_hash[ecryptfs_uid_hash(euid)]);
+ &ecryptfs_daemon_hash[ecryptfs_current_euid_hash()]);
out:
return rc;
}
@@ -188,9 +180,6 @@
if ((daemon->flags & ECRYPTFS_DAEMON_IN_READ)
|| (daemon->flags & ECRYPTFS_DAEMON_IN_POLL)) {
rc = -EBUSY;
- printk(KERN_WARNING "%s: Attempt to destroy daemon with pid "
- "[0x%p], but it is in the midst of a read or a poll\n",
- __func__, daemon->pid);
mutex_unlock(&daemon->mux);
goto out;
}
@@ -203,12 +192,6 @@
ecryptfs_msg_ctx_alloc_to_free(msg_ctx);
}
hlist_del(&daemon->euid_chain);
- if (daemon->task)
- wake_up_process(daemon->task);
- if (daemon->pid)
- put_pid(daemon->pid);
- if (daemon->user_ns)
- put_user_ns(daemon->user_ns);
mutex_unlock(&daemon->mux);
kzfree(daemon);
out:
@@ -216,42 +199,9 @@
}
/**
- * ecryptfs_process_quit
- * @euid: The user ID owner of the message
- * @user_ns: The namespace in which @euid applies
- * @pid: The process ID for the userspace program that sent the
- * message
- *
- * Deletes the corresponding daemon for the given euid and pid, if
- * it is the registered that is requesting the deletion. Returns zero
- * after deleting the desired daemon; non-zero otherwise.
- */
-int ecryptfs_process_quit(uid_t euid, struct user_namespace *user_ns,
- struct pid *pid)
-{
- struct ecryptfs_daemon *daemon;
- int rc;
-
- mutex_lock(&ecryptfs_daemon_hash_mux);
- rc = ecryptfs_find_daemon_by_euid(&daemon, euid, user_ns);
- if (rc || !daemon) {
- rc = -EINVAL;
- printk(KERN_ERR "Received request from user [%d] to "
- "unregister unrecognized daemon [0x%p]\n", euid, pid);
- goto out_unlock;
- }
- rc = ecryptfs_exorcise_daemon(daemon);
-out_unlock:
- mutex_unlock(&ecryptfs_daemon_hash_mux);
- return rc;
-}
-
-/**
* ecryptfs_process_reponse
* @msg: The ecryptfs message received; the caller should sanity check
* msg->data_len and free the memory
- * @pid: The process ID of the userspace application that sent the
- * message
* @seq: The sequence number of the message; must match the sequence
* number for the existing message context waiting for this
* response
@@ -270,16 +220,11 @@
*
* Returns zero on success; non-zero otherwise
*/
-int ecryptfs_process_response(struct ecryptfs_message *msg, uid_t euid,
- struct user_namespace *user_ns, struct pid *pid,
- u32 seq)
+int ecryptfs_process_response(struct ecryptfs_daemon *daemon,
+ struct ecryptfs_message *msg, u32 seq)
{
- struct ecryptfs_daemon *uninitialized_var(daemon);
struct ecryptfs_msg_ctx *msg_ctx;
size_t msg_size;
- struct nsproxy *nsproxy;
- struct user_namespace *tsk_user_ns;
- uid_t ctx_euid;
int rc;
if (msg->index >= ecryptfs_message_buf_len) {
@@ -292,51 +237,6 @@
}
msg_ctx = &ecryptfs_msg_ctx_arr[msg->index];
mutex_lock(&msg_ctx->mux);
- mutex_lock(&ecryptfs_daemon_hash_mux);
- rcu_read_lock();
- nsproxy = task_nsproxy(msg_ctx->task);
- if (nsproxy == NULL) {
- rc = -EBADMSG;
- printk(KERN_ERR "%s: Receiving process is a zombie. Dropping "
- "message.\n", __func__);
- rcu_read_unlock();
- mutex_unlock(&ecryptfs_daemon_hash_mux);
- goto wake_up;
- }
- tsk_user_ns = __task_cred(msg_ctx->task)->user_ns;
- ctx_euid = task_euid(msg_ctx->task);
- rc = ecryptfs_find_daemon_by_euid(&daemon, ctx_euid, tsk_user_ns);
- rcu_read_unlock();
- mutex_unlock(&ecryptfs_daemon_hash_mux);
- if (rc) {
- rc = -EBADMSG;
- printk(KERN_WARNING "%s: User [%d] received a "
- "message response from process [0x%p] but does "
- "not have a registered daemon\n", __func__,
- ctx_euid, pid);
- goto wake_up;
- }
- if (ctx_euid != euid) {
- rc = -EBADMSG;
- printk(KERN_WARNING "%s: Received message from user "
- "[%d]; expected message from user [%d]\n", __func__,
- euid, ctx_euid);
- goto unlock;
- }
- if (tsk_user_ns != user_ns) {
- rc = -EBADMSG;
- printk(KERN_WARNING "%s: Received message from user_ns "
- "[0x%p]; expected message from user_ns [0x%p]\n",
- __func__, user_ns, tsk_user_ns);
- goto unlock;
- }
- if (daemon->pid != pid) {
- rc = -EBADMSG;
- printk(KERN_ERR "%s: User [%d] sent a message response "
- "from an unrecognized process [0x%p]\n",
- __func__, ctx_euid, pid);
- goto unlock;
- }
if (msg_ctx->state != ECRYPTFS_MSG_CTX_STATE_PENDING) {
rc = -EINVAL;
printk(KERN_WARNING "%s: Desired context element is not "
@@ -359,9 +259,8 @@
}
memcpy(msg_ctx->msg, msg, msg_size);
msg_ctx->state = ECRYPTFS_MSG_CTX_STATE_DONE;
- rc = 0;
-wake_up:
wake_up_process(msg_ctx->task);
+ rc = 0;
unlock:
mutex_unlock(&msg_ctx->mux);
out:
@@ -383,14 +282,11 @@
struct ecryptfs_msg_ctx **msg_ctx)
{
struct ecryptfs_daemon *daemon;
- uid_t euid = current_euid();
int rc;
- rc = ecryptfs_find_daemon_by_euid(&daemon, euid, current_user_ns());
+ rc = ecryptfs_find_daemon_by_euid(&daemon);
if (rc || !daemon) {
rc = -ENOTCONN;
- printk(KERN_ERR "%s: User [%d] does not have a daemon "
- "registered\n", __func__, euid);
goto out;
}
mutex_lock(&ecryptfs_msg_ctx_lists_mux);
diff --git a/fs/ecryptfs/miscdev.c b/fs/ecryptfs/miscdev.c
index c0038f6..412e6ed 100644
--- a/fs/ecryptfs/miscdev.c
+++ b/fs/ecryptfs/miscdev.c
@@ -33,7 +33,7 @@
/**
* ecryptfs_miscdev_poll
- * @file: dev file (ignored)
+ * @file: dev file
* @pt: dev poll table (ignored)
*
* Returns the poll mask
@@ -41,20 +41,10 @@
static unsigned int
ecryptfs_miscdev_poll(struct file *file, poll_table *pt)
{
- struct ecryptfs_daemon *daemon;
+ struct ecryptfs_daemon *daemon = file->private_data;
unsigned int mask = 0;
- uid_t euid = current_euid();
- int rc;
- mutex_lock(&ecryptfs_daemon_hash_mux);
- /* TODO: Just use file->private_data? */
- rc = ecryptfs_find_daemon_by_euid(&daemon, euid, current_user_ns());
- if (rc || !daemon) {
- mutex_unlock(&ecryptfs_daemon_hash_mux);
- return -EINVAL;
- }
mutex_lock(&daemon->mux);
- mutex_unlock(&ecryptfs_daemon_hash_mux);
if (daemon->flags & ECRYPTFS_DAEMON_ZOMBIE) {
printk(KERN_WARNING "%s: Attempt to poll on zombified "
"daemon\n", __func__);
@@ -79,7 +69,7 @@
/**
* ecryptfs_miscdev_open
* @inode: inode of miscdev handle (ignored)
- * @file: file for miscdev handle (ignored)
+ * @file: file for miscdev handle
*
* Returns zero on success; non-zero otherwise
*/
@@ -87,7 +77,6 @@
ecryptfs_miscdev_open(struct inode *inode, struct file *file)
{
struct ecryptfs_daemon *daemon = NULL;
- uid_t euid = current_euid();
int rc;
mutex_lock(&ecryptfs_daemon_hash_mux);
@@ -98,30 +87,20 @@
"count; rc = [%d]\n", __func__, rc);
goto out_unlock_daemon_list;
}
- rc = ecryptfs_find_daemon_by_euid(&daemon, euid, current_user_ns());
- if (rc || !daemon) {
- rc = ecryptfs_spawn_daemon(&daemon, euid, current_user_ns(),
- task_pid(current));
- if (rc) {
- printk(KERN_ERR "%s: Error attempting to spawn daemon; "
- "rc = [%d]\n", __func__, rc);
- goto out_module_put_unlock_daemon_list;
- }
+ rc = ecryptfs_find_daemon_by_euid(&daemon);
+ if (!rc) {
+ rc = -EINVAL;
+ goto out_unlock_daemon_list;
+ }
+ rc = ecryptfs_spawn_daemon(&daemon, file);
+ if (rc) {
+ printk(KERN_ERR "%s: Error attempting to spawn daemon; "
+ "rc = [%d]\n", __func__, rc);
+ goto out_module_put_unlock_daemon_list;
}
mutex_lock(&daemon->mux);
- if (daemon->pid != task_pid(current)) {
- rc = -EINVAL;
- printk(KERN_ERR "%s: pid [0x%p] has registered with euid [%d], "
- "but pid [0x%p] has attempted to open the handle "
- "instead\n", __func__, daemon->pid, daemon->euid,
- task_pid(current));
- goto out_unlock_daemon;
- }
if (daemon->flags & ECRYPTFS_DAEMON_MISCDEV_OPEN) {
rc = -EBUSY;
- printk(KERN_ERR "%s: Miscellaneous device handle may only be "
- "opened once per daemon; pid [0x%p] already has this "
- "handle open\n", __func__, daemon->pid);
goto out_unlock_daemon;
}
daemon->flags |= ECRYPTFS_DAEMON_MISCDEV_OPEN;
@@ -140,7 +119,7 @@
/**
* ecryptfs_miscdev_release
* @inode: inode of fs/ecryptfs/euid handle (ignored)
- * @file: file for fs/ecryptfs/euid handle (ignored)
+ * @file: file for fs/ecryptfs/euid handle
*
* This keeps the daemon registered until the daemon sends another
* ioctl to fs/ecryptfs/ctl or until the kernel module unregisters.
@@ -150,20 +129,18 @@
static int
ecryptfs_miscdev_release(struct inode *inode, struct file *file)
{
- struct ecryptfs_daemon *daemon = NULL;
- uid_t euid = current_euid();
+ struct ecryptfs_daemon *daemon = file->private_data;
int rc;
- mutex_lock(&ecryptfs_daemon_hash_mux);
- rc = ecryptfs_find_daemon_by_euid(&daemon, euid, current_user_ns());
- if (rc || !daemon)
- daemon = file->private_data;
mutex_lock(&daemon->mux);
BUG_ON(!(daemon->flags & ECRYPTFS_DAEMON_MISCDEV_OPEN));
daemon->flags &= ~ECRYPTFS_DAEMON_MISCDEV_OPEN;
atomic_dec(&ecryptfs_num_miscdev_opens);
mutex_unlock(&daemon->mux);
+
+ mutex_lock(&ecryptfs_daemon_hash_mux);
rc = ecryptfs_exorcise_daemon(daemon);
+ mutex_unlock(&ecryptfs_daemon_hash_mux);
if (rc) {
printk(KERN_CRIT "%s: Fatal error whilst attempting to "
"shut down daemon; rc = [%d]. Please report this "
@@ -171,7 +148,6 @@
BUG();
}
module_put(THIS_MODULE);
- mutex_unlock(&ecryptfs_daemon_hash_mux);
return rc;
}
@@ -248,7 +224,7 @@
/**
* ecryptfs_miscdev_read - format and send message from queue
- * @file: fs/ecryptfs/euid miscdevfs handle (ignored)
+ * @file: miscdevfs handle
* @buf: User buffer into which to copy the next message on the daemon queue
* @count: Amount of space available in @buf
* @ppos: Offset in file (ignored)
@@ -262,43 +238,27 @@
ecryptfs_miscdev_read(struct file *file, char __user *buf, size_t count,
loff_t *ppos)
{
- struct ecryptfs_daemon *daemon;
+ struct ecryptfs_daemon *daemon = file->private_data;
struct ecryptfs_msg_ctx *msg_ctx;
size_t packet_length_size;
char packet_length[ECRYPTFS_MAX_PKT_LEN_SIZE];
size_t i;
size_t total_length;
- uid_t euid = current_euid();
int rc;
- mutex_lock(&ecryptfs_daemon_hash_mux);
- /* TODO: Just use file->private_data? */
- rc = ecryptfs_find_daemon_by_euid(&daemon, euid, current_user_ns());
- if (rc || !daemon) {
- mutex_unlock(&ecryptfs_daemon_hash_mux);
- return -EINVAL;
- }
mutex_lock(&daemon->mux);
- if (task_pid(current) != daemon->pid) {
- mutex_unlock(&daemon->mux);
- mutex_unlock(&ecryptfs_daemon_hash_mux);
- return -EPERM;
- }
if (daemon->flags & ECRYPTFS_DAEMON_ZOMBIE) {
rc = 0;
- mutex_unlock(&ecryptfs_daemon_hash_mux);
printk(KERN_WARNING "%s: Attempt to read from zombified "
"daemon\n", __func__);
goto out_unlock_daemon;
}
if (daemon->flags & ECRYPTFS_DAEMON_IN_READ) {
rc = 0;
- mutex_unlock(&ecryptfs_daemon_hash_mux);
goto out_unlock_daemon;
}
/* This daemon will not go away so long as this flag is set */
daemon->flags |= ECRYPTFS_DAEMON_IN_READ;
- mutex_unlock(&ecryptfs_daemon_hash_mux);
check_list:
if (list_empty(&daemon->msg_ctx_out_queue)) {
mutex_unlock(&daemon->mux);
@@ -382,16 +342,12 @@
* ecryptfs_miscdev_response - miscdevess response to message previously sent to daemon
* @data: Bytes comprising struct ecryptfs_message
* @data_size: sizeof(struct ecryptfs_message) + data len
- * @euid: Effective user id of miscdevess sending the miscdev response
- * @user_ns: The namespace in which @euid applies
- * @pid: Miscdevess id of miscdevess sending the miscdev response
* @seq: Sequence number for miscdev response packet
*
* Returns zero on success; non-zero otherwise
*/
-static int ecryptfs_miscdev_response(char *data, size_t data_size,
- uid_t euid, struct user_namespace *user_ns,
- struct pid *pid, u32 seq)
+static int ecryptfs_miscdev_response(struct ecryptfs_daemon *daemon, char *data,
+ size_t data_size, u32 seq)
{
struct ecryptfs_message *msg = (struct ecryptfs_message *)data;
int rc;
@@ -403,7 +359,7 @@
rc = -EINVAL;
goto out;
}
- rc = ecryptfs_process_response(msg, euid, user_ns, pid, seq);
+ rc = ecryptfs_process_response(daemon, msg, seq);
if (rc)
printk(KERN_ERR
"Error processing response message; rc = [%d]\n", rc);
@@ -413,7 +369,7 @@
/**
* ecryptfs_miscdev_write - handle write to daemon miscdev handle
- * @file: File for misc dev handle (ignored)
+ * @file: File for misc dev handle
* @buf: Buffer containing user data
* @count: Amount of data in @buf
* @ppos: Pointer to offset in file (ignored)
@@ -428,7 +384,6 @@
u32 seq;
size_t packet_size, packet_size_length;
char *data;
- uid_t euid = current_euid();
unsigned char packet_size_peek[ECRYPTFS_MAX_PKT_LEN_SIZE];
ssize_t rc;
@@ -488,10 +443,9 @@
}
memcpy(&counter_nbo, &data[PKT_CTR_OFFSET], PKT_CTR_SIZE);
seq = be32_to_cpu(counter_nbo);
- rc = ecryptfs_miscdev_response(
+ rc = ecryptfs_miscdev_response(file->private_data,
&data[PKT_LEN_OFFSET + packet_size_length],
- packet_size, euid, current_user_ns(),
- task_pid(current), seq);
+ packet_size, seq);
if (rc) {
printk(KERN_WARNING "%s: Failed to deliver miscdev "
"response to requesting operation; rc = [%zd]\n",
diff --git a/fs/ecryptfs/mmap.c b/fs/ecryptfs/mmap.c
index a46b3a8..bd1d57f 100644
--- a/fs/ecryptfs/mmap.c
+++ b/fs/ecryptfs/mmap.c
@@ -66,18 +66,6 @@
{
int rc;
- /*
- * Refuse to write the page out if we are called from reclaim context
- * since our writepage() path may potentially allocate memory when
- * calling into the lower fs vfs_write() which may in turn invoke
- * us again.
- */
- if (current->flags & PF_MEMALLOC) {
- redirty_page_for_writepage(wbc, page);
- rc = 0;
- goto out;
- }
-
rc = ecryptfs_encrypt_page(page);
if (rc) {
ecryptfs_printk(KERN_WARNING, "Error encrypting "
@@ -498,7 +486,6 @@
struct ecryptfs_crypt_stat *crypt_stat =
&ecryptfs_inode_to_private(ecryptfs_inode)->crypt_stat;
int rc;
- int need_unlock_page = 1;
ecryptfs_printk(KERN_DEBUG, "Calling fill_zeros_to_end_of_page"
"(page w/ index = [0x%.16lx], to = [%d])\n", index, to);
@@ -519,26 +506,26 @@
"zeros in page with index = [0x%.16lx]\n", index);
goto out;
}
- set_page_dirty(page);
- unlock_page(page);
- need_unlock_page = 0;
+ rc = ecryptfs_encrypt_page(page);
+ if (rc) {
+ ecryptfs_printk(KERN_WARNING, "Error encrypting page (upper "
+ "index [0x%.16lx])\n", index);
+ goto out;
+ }
if (pos + copied > i_size_read(ecryptfs_inode)) {
i_size_write(ecryptfs_inode, pos + copied);
ecryptfs_printk(KERN_DEBUG, "Expanded file size to "
"[0x%.16llx]\n",
(unsigned long long)i_size_read(ecryptfs_inode));
- balance_dirty_pages_ratelimited(mapping);
- rc = ecryptfs_write_inode_size_to_metadata(ecryptfs_inode);
- if (rc) {
- printk(KERN_ERR "Error writing inode size to metadata; "
- "rc = [%d]\n", rc);
- goto out;
- }
}
- rc = copied;
+ rc = ecryptfs_write_inode_size_to_metadata(ecryptfs_inode);
+ if (rc)
+ printk(KERN_ERR "Error writing inode size to metadata; "
+ "rc = [%d]\n", rc);
+ else
+ rc = copied;
out:
- if (need_unlock_page)
- unlock_page(page);
+ unlock_page(page);
page_cache_release(page);
return rc;
}
diff --git a/fs/exofs/inode.c b/fs/exofs/inode.c
index 5badb0c..1562c27 100644
--- a/fs/exofs/inode.c
+++ b/fs/exofs/inode.c
@@ -37,15 +37,12 @@
#define EXOFS_DBGMSG2(M...) do {} while (0)
-enum {MAX_PAGES_KMALLOC = PAGE_SIZE / sizeof(struct page *), };
-
unsigned exofs_max_io_pages(struct ore_layout *layout,
unsigned expected_pages)
{
- unsigned pages = min_t(unsigned, expected_pages, MAX_PAGES_KMALLOC);
+ unsigned pages = min_t(unsigned, expected_pages,
+ layout->max_io_length / PAGE_SIZE);
- /* TODO: easily support bio chaining */
- pages = min_t(unsigned, pages, layout->max_io_length / PAGE_SIZE);
return pages;
}
@@ -101,7 +98,8 @@
* it might not end here. don't be left with nothing
*/
if (!pcol->expected_pages)
- pcol->expected_pages = MAX_PAGES_KMALLOC;
+ pcol->expected_pages =
+ exofs_max_io_pages(&pcol->sbi->layout, ~0);
}
static int pcol_try_alloc(struct page_collect *pcol)
@@ -389,6 +387,8 @@
size_t len;
int ret;
+ BUG_ON(!PageLocked(page));
+
/* FIXME: Just for debugging, will be removed */
if (PageUptodate(page))
EXOFS_ERR("PageUptodate(0x%lx, 0x%lx)\n", pcol->inode->i_ino,
@@ -572,8 +572,16 @@
if (!pcol->that_locked_page ||
(pcol->that_locked_page->index != index)) {
- struct page *page = find_get_page(pcol->inode->i_mapping, index);
+ struct page *page;
+ loff_t i_size = i_size_read(pcol->inode);
+ if (offset >= i_size) {
+ *uptodate = true;
+ EXOFS_DBGMSG("offset >= i_size index=0x%lx\n", index);
+ return ZERO_PAGE(0);
+ }
+
+ page = find_get_page(pcol->inode->i_mapping, index);
if (!page) {
page = find_or_create_page(pcol->inode->i_mapping,
index, GFP_NOFS);
@@ -602,12 +610,13 @@
{
struct page_collect *pcol = priv;
- if (pcol->that_locked_page != page) {
+ if ((pcol->that_locked_page != page) && (ZERO_PAGE(0) != page)) {
EXOFS_DBGMSG("index=0x%lx\n", page->index);
page_cache_release(page);
return;
}
- EXOFS_DBGMSG("that_locked_page index=0x%lx\n", page->index);
+ EXOFS_DBGMSG("that_locked_page index=0x%lx\n",
+ ZERO_PAGE(0) == page ? -1 : page->index);
}
static const struct _ore_r4w_op _r4w_op = {
diff --git a/fs/exofs/ore.c b/fs/exofs/ore.c
index 24a49d4..1585db1 100644
--- a/fs/exofs/ore.c
+++ b/fs/exofs/ore.c
@@ -837,11 +837,11 @@
bio->bi_rw |= REQ_WRITE;
}
- osd_req_write(or, _ios_obj(ios, dev), per_dev->offset,
- bio, per_dev->length);
+ osd_req_write(or, _ios_obj(ios, cur_comp),
+ per_dev->offset, bio, per_dev->length);
ORE_DBGMSG("write(0x%llx) offset=0x%llx "
"length=0x%llx dev=%d\n",
- _LLU(_ios_obj(ios, dev)->id),
+ _LLU(_ios_obj(ios, cur_comp)->id),
_LLU(per_dev->offset),
_LLU(per_dev->length), dev);
} else if (ios->kern_buff) {
@@ -853,20 +853,20 @@
(ios->si.unit_off + ios->length >
ios->layout->stripe_unit));
- ret = osd_req_write_kern(or, _ios_obj(ios, per_dev->dev),
+ ret = osd_req_write_kern(or, _ios_obj(ios, cur_comp),
per_dev->offset,
ios->kern_buff, ios->length);
if (unlikely(ret))
goto out;
ORE_DBGMSG2("write_kern(0x%llx) offset=0x%llx "
"length=0x%llx dev=%d\n",
- _LLU(_ios_obj(ios, dev)->id),
+ _LLU(_ios_obj(ios, cur_comp)->id),
_LLU(per_dev->offset),
_LLU(ios->length), per_dev->dev);
} else {
- osd_req_set_attributes(or, _ios_obj(ios, dev));
+ osd_req_set_attributes(or, _ios_obj(ios, cur_comp));
ORE_DBGMSG2("obj(0x%llx) set_attributes=%d dev=%d\n",
- _LLU(_ios_obj(ios, dev)->id),
+ _LLU(_ios_obj(ios, cur_comp)->id),
ios->out_attr_len, dev);
}
diff --git a/fs/exofs/super.c b/fs/exofs/super.c
index 4337836..dde41a7 100644
--- a/fs/exofs/super.c
+++ b/fs/exofs/super.c
@@ -400,8 +400,6 @@
ret = ore_write(ios);
if (unlikely(ret))
EXOFS_ERR("%s: ore_write failed.\n", __func__);
- else
- sb->s_dirt = 0;
unlock_super(sb);
@@ -412,14 +410,6 @@
return ret;
}
-static void exofs_write_super(struct super_block *sb)
-{
- if (!(sb->s_flags & MS_RDONLY))
- exofs_sync_fs(sb, 1);
- else
- sb->s_dirt = 0;
-}
-
static void _exofs_print_device(const char *msg, const char *dev_path,
struct osd_dev *od, u64 pid)
{
@@ -952,7 +942,6 @@
.write_inode = exofs_write_inode,
.evict_inode = exofs_evict_inode,
.put_super = exofs_put_super,
- .write_super = exofs_write_super,
.sync_fs = exofs_sync_fs,
.statfs = exofs_statfs,
};
diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c
index 9a4a5c4..a075973 100644
--- a/fs/ext3/inode.c
+++ b/fs/ext3/inode.c
@@ -3459,14 +3459,6 @@
* inode out, but prune_icache isn't a user-visible syncing function.
* Whenever the user wants stuff synced (sys_sync, sys_msync, sys_fsync)
* we start and wait on commits.
- *
- * Is this efficient/effective? Well, we're being nice to the system
- * by cleaning up our inodes proactively so they can be reaped
- * without I/O. But we are potentially leaving up to five seconds'
- * worth of inodes floating about which prune_icache wants us to
- * write out. One way to fix that would be to get prune_icache()
- * to do a write_super() to free up some memory. It has the desired
- * effect.
*/
int ext3_mark_inode_dirty(handle_t *handle, struct inode *inode)
{
diff --git a/fs/ext3/super.c b/fs/ext3/super.c
index ff9bcdc..8c892e9 100644
--- a/fs/ext3/super.c
+++ b/fs/ext3/super.c
@@ -64,11 +64,6 @@
/*
* Wrappers for journal_start/end.
- *
- * The only special thing we need to do here is to make sure that all
- * journal_end calls result in the superblock being marked dirty, so
- * that sync() will call the filesystem's write_super callback if
- * appropriate.
*/
handle_t *ext3_journal_start_sb(struct super_block *sb, int nblocks)
{
@@ -90,12 +85,6 @@
return journal_start(journal, nblocks);
}
-/*
- * The only special thing we need to do here is to make sure that all
- * journal_stop calls result in the superblock being marked dirty, so
- * that sync() will call the filesystem's write_super callback if
- * appropriate.
- */
int __ext3_journal_stop(const char *where, handle_t *handle)
{
struct super_block *sb;
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 6324f74e..dff171c 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -1970,7 +1970,7 @@
* This function can get called via...
* - ext4_da_writepages after taking page lock (have journal handle)
* - journal_submit_inode_data_buffers (no journal handle)
- * - shrink_page_list via pdflush (no journal handle)
+ * - shrink_page_list via the kswapd/direct reclaim (no journal handle)
* - grab_page_cache when doing write_begin (have journal handle)
*
* We don't do any block allocation in this function. If we have page with
@@ -4589,14 +4589,6 @@
* inode out, but prune_icache isn't a user-visible syncing function.
* Whenever the user wants stuff synced (sys_sync, sys_msync, sys_fsync)
* we start and wait on commits.
- *
- * Is this efficient/effective? Well, we're being nice to the system
- * by cleaning up our inodes proactively so they can be reaped
- * without I/O. But we are potentially leaving up to five seconds'
- * worth of inodes floating about which prune_icache wants us to
- * write out. One way to fix that would be to get prune_icache()
- * to do a write_super() to free up some memory. It has the desired
- * effect.
*/
int ext4_mark_inode_dirty(handle_t *handle, struct inode *inode)
{
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index d76ec82..3e0851e 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -326,11 +326,6 @@
/*
* Wrappers for jbd2_journal_start/end.
- *
- * The only special thing we need to do here is to make sure that all
- * journal_end calls result in the superblock being marked dirty, so
- * that sync() will call the filesystem's write_super callback if
- * appropriate.
*/
handle_t *ext4_journal_start_sb(struct super_block *sb, int nblocks)
{
@@ -356,12 +351,6 @@
return jbd2_journal_start(journal, nblocks);
}
-/*
- * The only special thing we need to do here is to make sure that all
- * jbd2_journal_stop calls result in the superblock being marked dirty, so
- * that sync() will call the filesystem's write_super callback if
- * appropriate.
- */
int __ext4_journal_stop(const char *where, unsigned int line, handle_t *handle)
{
struct super_block *sb;
diff --git a/fs/gfs2/meta_io.c b/fs/gfs2/meta_io.c
index 3a56c8d..22255d9 100644
--- a/fs/gfs2/meta_io.c
+++ b/fs/gfs2/meta_io.c
@@ -52,7 +52,7 @@
/*
* If it's a fully non-blocking write attempt and we cannot
* lock the buffer then redirty the page. Note that this can
- * potentially cause a busy-wait loop from pdflush and kswapd
+ * potentially cause a busy-wait loop from flusher thread and kswapd
* activity, but those code paths have their own higher-level
* throttling.
*/
diff --git a/fs/hfs/mdb.c b/fs/hfs/mdb.c
index 5fd51a5..b7ec224 100644
--- a/fs/hfs/mdb.c
+++ b/fs/hfs/mdb.c
@@ -236,10 +236,10 @@
* hfs_mdb_commit()
*
* Description:
- * This updates the MDB on disk (look also at hfs_write_super()).
+ * This updates the MDB on disk.
* It does not check, if the superblock has been modified, or
* if the filesystem has been mounted read-only. It is mainly
- * called by hfs_write_super() and hfs_btree_extend().
+ * called by hfs_sync_fs() and flush_mdb().
* Input Variable(s):
* struct hfs_mdb *mdb: Pointer to the hfs MDB
* int backup;
diff --git a/fs/jbd/journal.c b/fs/jbd/journal.c
index 425c2f2..0935750 100644
--- a/fs/jbd/journal.c
+++ b/fs/jbd/journal.c
@@ -534,8 +534,8 @@
ret = 1;
} else if (journal->j_committing_transaction) {
/*
- * If ext3_write_super() recently started a commit, then we
- * have to wait for completion of that transaction
+ * If commit has been started, then we have to wait for
+ * completion of that transaction.
*/
if (ptid)
*ptid = journal->j_committing_transaction->t_tid;
diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c
index e9a3c4c..8625da2 100644
--- a/fs/jbd2/journal.c
+++ b/fs/jbd2/journal.c
@@ -612,8 +612,8 @@
ret = 1;
} else if (journal->j_committing_transaction) {
/*
- * If ext3_write_super() recently started a commit, then we
- * have to wait for completion of that transaction
+ * If commit has been started, then we have to wait for
+ * completion of that transaction.
*/
if (ptid)
*ptid = journal->j_committing_transaction->t_tid;
diff --git a/fs/nilfs2/super.c b/fs/nilfs2/super.c
index 6522cac..6a10812 100644
--- a/fs/nilfs2/super.c
+++ b/fs/nilfs2/super.c
@@ -676,17 +676,13 @@
.alloc_inode = nilfs_alloc_inode,
.destroy_inode = nilfs_destroy_inode,
.dirty_inode = nilfs_dirty_inode,
- /* .write_inode = nilfs_write_inode, */
- /* .drop_inode = nilfs_drop_inode, */
.evict_inode = nilfs_evict_inode,
.put_super = nilfs_put_super,
- /* .write_super = nilfs_write_super, */
.sync_fs = nilfs_sync_fs,
.freeze_fs = nilfs_freeze,
.unfreeze_fs = nilfs_unfreeze,
.statfs = nilfs_statfs,
.remount_fs = nilfs_remount,
- /* .umount_begin */
.show_options = nilfs_show_options
};
diff --git a/fs/nilfs2/the_nilfs.h b/fs/nilfs2/the_nilfs.h
index 6eee417..be1267a 100644
--- a/fs/nilfs2/the_nilfs.h
+++ b/fs/nilfs2/the_nilfs.h
@@ -107,8 +107,6 @@
* used for
* - loading the latest checkpoint exclusively.
* - allocating a new full segment.
- * - protecting s_dirt in the super_block struct
- * (see nilfs_write_super) and the following fields.
*/
struct buffer_head *ns_sbh[2];
struct nilfs_super_block *ns_sbp[2];
diff --git a/fs/open.c b/fs/open.c
index f3d96e7..bc132e1 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -717,7 +717,7 @@
* here, so just reset the state.
*/
file_reset_write(f);
- mnt_drop_write(f->f_path.mnt);
+ __mnt_drop_write(f->f_path.mnt);
}
}
cleanup_file:
diff --git a/fs/super.c b/fs/super.c
index b05cf47..0902cfa 100644
--- a/fs/super.c
+++ b/fs/super.c
@@ -537,46 +537,6 @@
EXPORT_SYMBOL(drop_super);
/**
- * sync_supers - helper for periodic superblock writeback
- *
- * Call the write_super method if present on all dirty superblocks in
- * the system. This is for the periodic writeback used by most older
- * filesystems. For data integrity superblock writeback use
- * sync_filesystems() instead.
- *
- * Note: check the dirty flag before waiting, so we don't
- * hold up the sync while mounting a device. (The newly
- * mounted device won't need syncing.)
- */
-void sync_supers(void)
-{
- struct super_block *sb, *p = NULL;
-
- spin_lock(&sb_lock);
- list_for_each_entry(sb, &super_blocks, s_list) {
- if (hlist_unhashed(&sb->s_instances))
- continue;
- if (sb->s_op->write_super && sb->s_dirt) {
- sb->s_count++;
- spin_unlock(&sb_lock);
-
- down_read(&sb->s_umount);
- if (sb->s_root && sb->s_dirt && (sb->s_flags & MS_BORN))
- sb->s_op->write_super(sb);
- up_read(&sb->s_umount);
-
- spin_lock(&sb_lock);
- if (p)
- __put_super(p);
- p = sb;
- }
- }
- if (p)
- __put_super(p);
- spin_unlock(&sb_lock);
-}
-
-/**
* iterate_supers - call function for all active superblocks
* @f: function to call
* @arg: argument to pass to it
diff --git a/fs/ubifs/file.c b/fs/ubifs/file.c
index 35389ca..7bd6e72 100644
--- a/fs/ubifs/file.c
+++ b/fs/ubifs/file.c
@@ -37,11 +37,11 @@
*
* A thing to keep in mind: inode @i_mutex is locked in most VFS operations we
* implement. However, this is not true for 'ubifs_writepage()', which may be
- * called with @i_mutex unlocked. For example, when pdflush is doing background
- * write-back, it calls 'ubifs_writepage()' with unlocked @i_mutex. At "normal"
- * work-paths the @i_mutex is locked in 'ubifs_writepage()', e.g. in the
- * "sys_write -> alloc_pages -> direct reclaim path". So, in 'ubifs_writepage()'
- * we are only guaranteed that the page is locked.
+ * called with @i_mutex unlocked. For example, when flusher thread is doing
+ * background write-back, it calls 'ubifs_writepage()' with unlocked @i_mutex.
+ * At "normal" work-paths the @i_mutex is locked in 'ubifs_writepage()', e.g.
+ * in the "sys_write -> alloc_pages -> direct reclaim path". So, in
+ * 'ubifs_writepage()' we are only guaranteed that the page is locked.
*
* Similarly, @i_mutex is not always locked in 'ubifs_readpage()', e.g., the
* read-ahead path does not lock it ("sys_read -> generic_file_aio_read ->
diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c
index 1c766c3..c3fa6c5 100644
--- a/fs/ubifs/super.c
+++ b/fs/ubifs/super.c
@@ -303,7 +303,7 @@
mutex_lock(&ui->ui_mutex);
/*
* Due to races between write-back forced by budgeting
- * (see 'sync_some_inodes()') and pdflush write-back, the inode may
+ * (see 'sync_some_inodes()') and background write-back, the inode may
* have already been synchronized, do not do this again. This might
* also happen if it was synchronized in an VFS operation, e.g.
* 'ubifs_link()'.
diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h
index 2c744c7..26a92fc 100644
--- a/include/acpi/acpixf.h
+++ b/include/acpi/acpixf.h
@@ -491,11 +491,11 @@
acpi_status acpi_enter_sleep_state_prep(u8 sleep_state);
-acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state, u8 flags);
+acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state);
ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status asmlinkage acpi_enter_sleep_state_s4bios(void))
-acpi_status acpi_leave_sleep_state_prep(u8 sleep_state, u8 flags);
+acpi_status acpi_leave_sleep_state_prep(u8 sleep_state);
acpi_status acpi_leave_sleep_state(u8 sleep_state);
diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h
index 3af87de..3d00bd5 100644
--- a/include/acpi/actypes.h
+++ b/include/acpi/actypes.h
@@ -803,7 +803,7 @@
/* Sleep function dispatch */
-typedef acpi_status(*ACPI_SLEEP_FUNCTION) (u8 sleep_state, u8 flags);
+typedef acpi_status(*ACPI_SLEEP_FUNCTION) (u8 sleep_state);
struct acpi_sleep_functions {
ACPI_SLEEP_FUNCTION legacy_function;
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 3ad510b..4f2a762 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -96,7 +96,7 @@
void acpi_numa_slit_init (struct acpi_table_slit *slit);
void acpi_numa_processor_affinity_init (struct acpi_srat_cpu_affinity *pa);
void acpi_numa_x2apic_affinity_init(struct acpi_srat_x2apic_cpu_affinity *pa);
-void acpi_numa_memory_affinity_init (struct acpi_srat_mem_affinity *ma);
+int acpi_numa_memory_affinity_init (struct acpi_srat_mem_affinity *ma);
void acpi_numa_arch_fixup(void);
#ifdef CONFIG_ACPI_HOTPLUG_CPU
diff --git a/include/linux/backing-dev.h b/include/linux/backing-dev.h
index c97c6b9..2a9a9ab 100644
--- a/include/linux/backing-dev.h
+++ b/include/linux/backing-dev.h
@@ -124,7 +124,6 @@
void bdi_start_background_writeback(struct backing_dev_info *bdi);
int bdi_writeback_thread(void *data);
int bdi_has_dirty_io(struct backing_dev_info *bdi);
-void bdi_arm_supers_timer(void);
void bdi_wakeup_thread_delayed(struct backing_dev_info *bdi);
void bdi_lock_two(struct bdi_writeback *wb1, struct bdi_writeback *wb2);
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 38dba16..aa11047 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -1491,7 +1491,6 @@
struct super_block {
struct list_head s_list; /* Keep this first */
dev_t s_dev; /* search index; _not_ kdev_t */
- unsigned char s_dirt;
unsigned char s_blocksize_bits;
unsigned long s_blocksize;
loff_t s_maxbytes; /* Max file size */
@@ -1861,7 +1860,6 @@
int (*drop_inode) (struct inode *);
void (*evict_inode) (struct inode *);
void (*put_super) (struct super_block *);
- void (*write_super) (struct super_block *);
int (*sync_fs)(struct super_block *sb, int wait);
int (*freeze_fs) (struct super_block *);
int (*unfreeze_fs) (struct super_block *);
@@ -2397,7 +2395,6 @@
int datasync);
extern int vfs_fsync(struct file *file, int datasync);
extern int generic_write_sync(struct file *file, loff_t pos, loff_t count);
-extern void sync_supers(void);
extern void emergency_sync(void);
extern void emergency_remount(void);
#ifdef CONFIG_BLOCK
diff --git a/include/linux/ftrace_event.h b/include/linux/ftrace_event.h
index af961d6..642928c 100644
--- a/include/linux/ftrace_event.h
+++ b/include/linux/ftrace_event.h
@@ -306,9 +306,10 @@
static inline void
perf_trace_buf_submit(void *raw_data, int size, int rctx, u64 addr,
- u64 count, struct pt_regs *regs, void *head)
+ u64 count, struct pt_regs *regs, void *head,
+ struct task_struct *task)
{
- perf_tp_event(addr, count, raw_data, size, regs, head, rctx);
+ perf_tp_event(addr, count, raw_data, size, regs, head, rctx, task);
}
#endif
diff --git a/include/linux/hardirq.h b/include/linux/hardirq.h
index bb7f309..305f23c 100644
--- a/include/linux/hardirq.h
+++ b/include/linux/hardirq.h
@@ -22,7 +22,7 @@
*
* - bits 16-25 are the hardirq count (max # of nested hardirqs: 1024)
* - bit 26 is the NMI_MASK
- * - bit 28 is the PREEMPT_ACTIVE flag
+ * - bit 27 is the PREEMPT_ACTIVE flag
*
* PREEMPT_MASK: 0x000000ff
* SOFTIRQ_MASK: 0x0000ff00
diff --git a/include/linux/iommu.h b/include/linux/iommu.h
index 54d6d69..7e83370 100644
--- a/include/linux/iommu.h
+++ b/include/linux/iommu.h
@@ -20,6 +20,7 @@
#define __LINUX_IOMMU_H
#include <linux/errno.h>
+#include <linux/types.h>
#define IOMMU_READ (1)
#define IOMMU_WRITE (2)
@@ -30,6 +31,7 @@
struct bus_type;
struct device;
struct iommu_domain;
+struct notifier_block;
/* iommu fault flags */
#define IOMMU_FAULT_READ 0x0
diff --git a/include/linux/irq.h b/include/linux/irq.h
index 553fb66..216b0ba 100644
--- a/include/linux/irq.h
+++ b/include/linux/irq.h
@@ -349,6 +349,7 @@
IRQCHIP_MASK_ON_SUSPEND = (1 << 2),
IRQCHIP_ONOFFLINE_ENABLED = (1 << 3),
IRQCHIP_SKIP_SET_WAKE = (1 << 4),
+ IRQCHIP_ONESHOT_SAFE = (1 << 5),
};
/* This include will go away once we isolated irq_desc usage to core code */
diff --git a/include/linux/jiffies.h b/include/linux/jiffies.h
index 265e2c3..8268054 100644
--- a/include/linux/jiffies.h
+++ b/include/linux/jiffies.h
@@ -39,9 +39,6 @@
# error Invalid value of HZ.
#endif
-/* LATCH is used in the interval timer and ftape setup. */
-#define LATCH ((CLOCK_TICK_RATE + HZ/2) / HZ) /* For divider */
-
/* Suppose we want to divide two numbers NOM and DEN: NOM/DEN, then we can
* improve accuracy by shifting LSH bits, hence calculating:
* (NOM << LSH) / DEN
@@ -54,18 +51,30 @@
#define SH_DIV(NOM,DEN,LSH) ( (((NOM) / (DEN)) << (LSH)) \
+ ((((NOM) % (DEN)) << (LSH)) + (DEN) / 2) / (DEN))
-/* HZ is the requested value. ACTHZ is actual HZ ("<< 8" is for accuracy) */
-#define ACTHZ (SH_DIV (CLOCK_TICK_RATE, LATCH, 8))
+#ifdef CLOCK_TICK_RATE
+/* LATCH is used in the interval timer and ftape setup. */
+# define LATCH ((CLOCK_TICK_RATE + HZ/2) / HZ) /* For divider */
-/* TICK_NSEC is the time between ticks in nsec assuming real ACTHZ */
-#define TICK_NSEC (SH_DIV (1000000UL * 1000, ACTHZ, 8))
+/*
+ * HZ is the requested value. However the CLOCK_TICK_RATE may not allow
+ * for exactly HZ. So SHIFTED_HZ is high res HZ ("<< 8" is for accuracy)
+ */
+# define SHIFTED_HZ (SH_DIV(CLOCK_TICK_RATE, LATCH, 8))
+#else
+# define SHIFTED_HZ (HZ << 8)
+#endif
+
+/* TICK_NSEC is the time between ticks in nsec assuming SHIFTED_HZ */
+#define TICK_NSEC (SH_DIV(1000000UL * 1000, SHIFTED_HZ, 8))
/* TICK_USEC is the time between ticks in usec assuming fake USER_HZ */
#define TICK_USEC ((1000000UL + USER_HZ/2) / USER_HZ)
-/* TICK_USEC_TO_NSEC is the time between ticks in nsec assuming real ACTHZ and */
-/* a value TUSEC for TICK_USEC (can be set bij adjtimex) */
-#define TICK_USEC_TO_NSEC(TUSEC) (SH_DIV (TUSEC * USER_HZ * 1000, ACTHZ, 8))
+/*
+ * TICK_USEC_TO_NSEC is the time between ticks in nsec assuming SHIFTED_HZ and
+ * a value TUSEC for TICK_USEC (can be set bij adjtimex)
+ */
+#define TICK_USEC_TO_NSEC(TUSEC) (SH_DIV(TUSEC * USER_HZ * 1000, SHIFTED_HZ, 8))
/* some arch's have a small-data section that can be accessed register-relative
* but that can only take up to, say, 4-byte variables. jiffies being part of
diff --git a/include/linux/kdb.h b/include/linux/kdb.h
index 0647258..42d9e86 100644
--- a/include/linux/kdb.h
+++ b/include/linux/kdb.h
@@ -75,8 +75,6 @@
#define KDB_FLAG_CATASTROPHIC (1 << 1) /* A catastrophic event has occurred */
#define KDB_FLAG_CMD_INTERRUPT (1 << 2) /* Previous command was interrupted */
#define KDB_FLAG_NOIPI (1 << 3) /* Do not send IPIs */
-#define KDB_FLAG_ONLY_DO_DUMP (1 << 4) /* Only do a dump, used when
- * kdb is off */
#define KDB_FLAG_NO_CONSOLE (1 << 5) /* No console is available,
* kdb is disabled */
#define KDB_FLAG_NO_VT_CONSOLE (1 << 6) /* No VT console is available, do
diff --git a/include/linux/olpc-ec.h b/include/linux/olpc-ec.h
new file mode 100644
index 0000000..5bb6e76
--- /dev/null
+++ b/include/linux/olpc-ec.h
@@ -0,0 +1,41 @@
+#ifndef _LINUX_OLPC_EC_H
+#define _LINUX_OLPC_EC_H
+
+/* XO-1 EC commands */
+#define EC_FIRMWARE_REV 0x08
+#define EC_WRITE_SCI_MASK 0x1b
+#define EC_WAKE_UP_WLAN 0x24
+#define EC_WLAN_LEAVE_RESET 0x25
+#define EC_READ_EB_MODE 0x2a
+#define EC_SET_SCI_INHIBIT 0x32
+#define EC_SET_SCI_INHIBIT_RELEASE 0x34
+#define EC_WLAN_ENTER_RESET 0x35
+#define EC_WRITE_EXT_SCI_MASK 0x38
+#define EC_SCI_QUERY 0x84
+#define EC_EXT_SCI_QUERY 0x85
+
+struct platform_device;
+
+struct olpc_ec_driver {
+ int (*probe)(struct platform_device *);
+ int (*suspend)(struct platform_device *);
+ int (*resume)(struct platform_device *);
+
+ int (*ec_cmd)(u8, u8 *, size_t, u8 *, size_t, void *);
+};
+
+#ifdef CONFIG_OLPC
+
+extern void olpc_ec_driver_register(struct olpc_ec_driver *drv, void *arg);
+
+extern int olpc_ec_cmd(u8 cmd, u8 *inbuf, size_t inlen, u8 *outbuf,
+ size_t outlen);
+
+#else
+
+static inline int olpc_ec_cmd(u8 cmd, u8 *inbuf, size_t inlen, u8 *outbuf,
+ size_t outlen) { return -ENODEV; }
+
+#endif /* CONFIG_OLPC */
+
+#endif /* _LINUX_OLPC_EC_H */
diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h
index 76c5c8b..7602ccb 100644
--- a/include/linux/perf_event.h
+++ b/include/linux/perf_event.h
@@ -1272,7 +1272,8 @@
extern void perf_event_init(void);
extern void perf_tp_event(u64 addr, u64 count, void *record,
int entry_size, struct pt_regs *regs,
- struct hlist_head *head, int rctx);
+ struct hlist_head *head, int rctx,
+ struct task_struct *task);
extern void perf_bp_event(struct perf_event *event, void *data);
#ifndef perf_misc_flags
diff --git a/include/linux/shdma-base.h b/include/linux/shdma-base.h
index 93f9821..a3728bf 100644
--- a/include/linux/shdma-base.h
+++ b/include/linux/shdma-base.h
@@ -50,6 +50,7 @@
struct list_head node;
struct dma_async_tx_descriptor async_tx;
enum dma_transfer_direction direction;
+ size_t partial;
dma_cookie_t cookie;
int chunks;
int mark;
@@ -98,6 +99,7 @@
void (*start_xfer)(struct shdma_chan *, struct shdma_desc *);
struct shdma_desc *(*embedded_desc)(void *, int);
bool (*chan_irq)(struct shdma_chan *, int);
+ size_t (*get_partial)(struct shdma_chan *, struct shdma_desc *);
};
struct shdma_dev {
diff --git a/include/linux/timex.h b/include/linux/timex.h
index 99bc88b..7c5ceb2 100644
--- a/include/linux/timex.h
+++ b/include/linux/timex.h
@@ -232,7 +232,7 @@
* estimated error = NTP dispersion.
*/
extern unsigned long tick_usec; /* USER_HZ period (usec) */
-extern unsigned long tick_nsec; /* ACTHZ period (nsec) */
+extern unsigned long tick_nsec; /* SHIFTED_HZ period (nsec) */
extern void ntp_init(void);
extern void ntp_clear(void);
diff --git a/include/linux/topology.h b/include/linux/topology.h
index e91cd43..fec12d6 100644
--- a/include/linux/topology.h
+++ b/include/linux/topology.h
@@ -164,6 +164,7 @@
| 0*SD_SHARE_CPUPOWER \
| 0*SD_SHARE_PKG_RESOURCES \
| 0*SD_SERIALIZE \
+ | 1*SD_PREFER_SIBLING \
, \
.last_balance = jiffies, \
.balance_interval = 1, \
diff --git a/include/linux/writeback.h b/include/linux/writeback.h
index c66fe33..50c3e8f 100644
--- a/include/linux/writeback.h
+++ b/include/linux/writeback.h
@@ -104,7 +104,6 @@
wait_on_bit(&inode->i_state, __I_NEW, inode_wait, TASK_UNINTERRUPTIBLE);
}
-
/*
* mm/page-writeback.c
*/
diff --git a/include/trace/events/sched.h b/include/trace/events/sched.h
index ea7a203..5a8671e 100644
--- a/include/trace/events/sched.h
+++ b/include/trace/events/sched.h
@@ -73,6 +73,9 @@
__entry->prio = p->prio;
__entry->success = success;
__entry->target_cpu = task_cpu(p);
+ )
+ TP_perf_assign(
+ __perf_task(p);
),
TP_printk("comm=%s pid=%d prio=%d success=%d target_cpu=%03d",
@@ -325,6 +328,7 @@
)
TP_perf_assign(
__perf_count(delay);
+ __perf_task(tsk);
),
TP_printk("comm=%s pid=%d delay=%Lu [ns]",
diff --git a/include/trace/ftrace.h b/include/trace/ftrace.h
index c6bc2fa..a763888 100644
--- a/include/trace/ftrace.h
+++ b/include/trace/ftrace.h
@@ -712,6 +712,9 @@
#undef __perf_count
#define __perf_count(c) __count = (c)
+#undef __perf_task
+#define __perf_task(t) __task = (t)
+
#undef TP_perf_assign
#define TP_perf_assign(args...) args
@@ -725,6 +728,7 @@
struct ftrace_raw_##call *entry; \
struct pt_regs __regs; \
u64 __addr = 0, __count = 1; \
+ struct task_struct *__task = NULL; \
struct hlist_head *head; \
int __entry_size; \
int __data_size; \
@@ -752,7 +756,7 @@
\
head = this_cpu_ptr(event_call->perf_events); \
perf_trace_buf_submit(entry, __entry_size, rctx, __addr, \
- __count, &__regs, head); \
+ __count, &__regs, head, __task); \
}
/*
diff --git a/kernel/debug/kdb/kdb_debugger.c b/kernel/debug/kdb/kdb_debugger.c
index 8b68ce7..be7b33b 100644
--- a/kernel/debug/kdb/kdb_debugger.c
+++ b/kernel/debug/kdb/kdb_debugger.c
@@ -12,6 +12,7 @@
#include <linux/kdb.h>
#include <linux/kdebug.h>
#include <linux/export.h>
+#include <linux/hardirq.h>
#include "kdb_private.h"
#include "../debug_core.h"
@@ -52,6 +53,9 @@
if (atomic_read(&kgdb_setting_breakpoint))
reason = KDB_REASON_KEYBOARD;
+ if (in_nmi())
+ reason = KDB_REASON_NMI;
+
for (i = 0, bp = kdb_breakpoints; i < KDB_MAXBPT; i++, bp++) {
if ((bp->bp_enabled) && (bp->bp_addr == addr)) {
reason = KDB_REASON_BREAK;
diff --git a/kernel/debug/kdb/kdb_io.c b/kernel/debug/kdb/kdb_io.c
index bb9520f..0a69d2a 100644
--- a/kernel/debug/kdb/kdb_io.c
+++ b/kernel/debug/kdb/kdb_io.c
@@ -715,9 +715,6 @@
/* check for having reached the LINES number of printed lines */
if (kdb_nextline == linecount) {
char buf1[16] = "";
-#if defined(CONFIG_SMP)
- char buf2[32];
-#endif
/* Watch out for recursion here. Any routine that calls
* kdb_printf will come back through here. And kdb_read
@@ -732,14 +729,6 @@
if (moreprompt == NULL)
moreprompt = "more> ";
-#if defined(CONFIG_SMP)
- if (strchr(moreprompt, '%')) {
- sprintf(buf2, moreprompt, get_cpu());
- put_cpu();
- moreprompt = buf2;
- }
-#endif
-
kdb_input_flush();
c = console_drivers;
diff --git a/kernel/debug/kdb/kdb_main.c b/kernel/debug/kdb/kdb_main.c
index 1f91413..31df170 100644
--- a/kernel/debug/kdb/kdb_main.c
+++ b/kernel/debug/kdb/kdb_main.c
@@ -139,11 +139,10 @@
static char *__env[] = {
#if defined(CONFIG_SMP)
"PROMPT=[%d]kdb> ",
- "MOREPROMPT=[%d]more> ",
#else
"PROMPT=kdb> ",
- "MOREPROMPT=more> ",
#endif
+ "MOREPROMPT=more> ",
"RADIX=16",
"MDCOUNT=8", /* lines of md output */
KDB_PLATFORM_ENV,
@@ -1236,18 +1235,6 @@
*cmdbuf = '\0';
*(cmd_hist[cmd_head]) = '\0';
- if (KDB_FLAG(ONLY_DO_DUMP)) {
- /* kdb is off but a catastrophic error requires a dump.
- * Take the dump and reboot.
- * Turn on logging so the kdb output appears in the log
- * buffer in the dump.
- */
- const char *setargs[] = { "set", "LOGGING", "1" };
- kdb_set(2, setargs);
- kdb_reboot(0, NULL);
- /*NOTREACHED*/
- }
-
do_full_getstr:
#if defined(CONFIG_SMP)
snprintf(kdb_prompt_str, CMD_BUFLEN, kdbgetenv("PROMPT"),
diff --git a/kernel/events/callchain.c b/kernel/events/callchain.c
index 6581a04..98d4597 100644
--- a/kernel/events/callchain.c
+++ b/kernel/events/callchain.c
@@ -153,7 +153,8 @@
put_recursion_context(__get_cpu_var(callchain_recursion), rctx);
}
-struct perf_callchain_entry *perf_callchain(struct pt_regs *regs)
+struct perf_callchain_entry *
+perf_callchain(struct perf_event *event, struct pt_regs *regs)
{
int rctx;
struct perf_callchain_entry *entry;
@@ -178,6 +179,12 @@
}
if (regs) {
+ /*
+ * Disallow cross-task user callchains.
+ */
+ if (event->ctx->task && event->ctx->task != current)
+ goto exit_put;
+
perf_callchain_store(entry, PERF_CONTEXT_USER);
perf_callchain_user(entry, regs);
}
diff --git a/kernel/events/core.c b/kernel/events/core.c
index f1cf0ed..b7935fc 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -4039,7 +4039,7 @@
if (sample_type & PERF_SAMPLE_CALLCHAIN) {
int size = 1;
- data->callchain = perf_callchain(regs);
+ data->callchain = perf_callchain(event, regs);
if (data->callchain)
size += data->callchain->nr;
@@ -5209,7 +5209,8 @@
}
void perf_tp_event(u64 addr, u64 count, void *record, int entry_size,
- struct pt_regs *regs, struct hlist_head *head, int rctx)
+ struct pt_regs *regs, struct hlist_head *head, int rctx,
+ struct task_struct *task)
{
struct perf_sample_data data;
struct perf_event *event;
@@ -5228,6 +5229,31 @@
perf_swevent_event(event, count, &data, regs);
}
+ /*
+ * If we got specified a target task, also iterate its context and
+ * deliver this event there too.
+ */
+ if (task && task != current) {
+ struct perf_event_context *ctx;
+ struct trace_entry *entry = record;
+
+ rcu_read_lock();
+ ctx = rcu_dereference(task->perf_event_ctxp[perf_sw_context]);
+ if (!ctx)
+ goto unlock;
+
+ list_for_each_entry_rcu(event, &ctx->event_list, event_entry) {
+ if (event->attr.type != PERF_TYPE_TRACEPOINT)
+ continue;
+ if (event->attr.config != entry->type)
+ continue;
+ if (perf_tp_event_match(event, &data, regs))
+ perf_swevent_event(event, count, &data, regs);
+ }
+unlock:
+ rcu_read_unlock();
+ }
+
perf_swevent_put_recursion_context(rctx);
}
EXPORT_SYMBOL_GPL(perf_tp_event);
diff --git a/kernel/events/internal.h b/kernel/events/internal.h
index b0b107f..a096c19 100644
--- a/kernel/events/internal.h
+++ b/kernel/events/internal.h
@@ -101,7 +101,8 @@
}
/* Callchain handling */
-extern struct perf_callchain_entry *perf_callchain(struct pt_regs *regs);
+extern struct perf_callchain_entry *
+perf_callchain(struct perf_event *event, struct pt_regs *regs);
extern int get_callchain_buffers(void);
extern void put_callchain_buffers(void);
diff --git a/kernel/futex.c b/kernel/futex.c
index e2b0fb9..3717e7b 100644
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -2231,11 +2231,11 @@
* @uaddr2: the pi futex we will take prior to returning to user-space
*
* The caller will wait on uaddr and will be requeued by futex_requeue() to
- * uaddr2 which must be PI aware. Normal wakeup will wake on uaddr2 and
- * complete the acquisition of the rt_mutex prior to returning to userspace.
- * This ensures the rt_mutex maintains an owner when it has waiters; without
- * one, the pi logic wouldn't know which task to boost/deboost, if there was a
- * need to.
+ * uaddr2 which must be PI aware and unique from uaddr. Normal wakeup will wake
+ * on uaddr2 and complete the acquisition of the rt_mutex prior to returning to
+ * userspace. This ensures the rt_mutex maintains an owner when it has waiters;
+ * without one, the pi logic would not know which task to boost/deboost, if
+ * there was a need to.
*
* We call schedule in futex_wait_queue_me() when we enqueue and return there
* via the following:
@@ -2272,6 +2272,9 @@
struct futex_q q = futex_q_init;
int res, ret;
+ if (uaddr == uaddr2)
+ return -EINVAL;
+
if (!bitset)
return -EINVAL;
@@ -2343,7 +2346,7 @@
* signal. futex_unlock_pi() will not destroy the lock_ptr nor
* the pi_state.
*/
- WARN_ON(!&q.pi_state);
+ WARN_ON(!q.pi_state);
pi_mutex = &q.pi_state->pi_mutex;
ret = rt_mutex_finish_proxy_lock(pi_mutex, to, &rt_waiter, 1);
debug_rt_mutex_free_waiter(&rt_waiter);
@@ -2370,7 +2373,7 @@
* fault, unlock the rt_mutex and return the fault to userspace.
*/
if (ret == -EFAULT) {
- if (rt_mutex_owner(pi_mutex) == current)
+ if (pi_mutex && rt_mutex_owner(pi_mutex) == current)
rt_mutex_unlock(pi_mutex);
} else if (ret == -EINTR) {
/*
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index 0a8e8f0..4c69326 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -944,6 +944,18 @@
}
/*
+ * Drivers are often written to work w/o knowledge about the
+ * underlying irq chip implementation, so a request for a
+ * threaded irq without a primary hard irq context handler
+ * requires the ONESHOT flag to be set. Some irq chips like
+ * MSI based interrupts are per se one shot safe. Check the
+ * chip flags, so we can avoid the unmask dance at the end of
+ * the threaded handler for those.
+ */
+ if (desc->irq_data.chip->flags & IRQCHIP_ONESHOT_SAFE)
+ new->flags &= ~IRQF_ONESHOT;
+
+ /*
* The following block of code has to be executed atomically
*/
raw_spin_lock_irqsave(&desc->lock, flags);
@@ -1017,7 +1029,8 @@
*/
new->thread_mask = 1 << ffz(thread_mask);
- } else if (new->handler == irq_default_primary_handler) {
+ } else if (new->handler == irq_default_primary_handler &&
+ !(desc->irq_data.chip->flags & IRQCHIP_ONESHOT_SAFE)) {
/*
* The interrupt was requested with handler = NULL, so
* we use the default primary handler for it. But it
diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index d325c4b..82ad284 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -4340,9 +4340,7 @@
*/
if (unlikely(policy == p->policy && (!rt_policy(policy) ||
param->sched_priority == p->rt_priority))) {
-
- __task_rq_unlock(rq);
- raw_spin_unlock_irqrestore(&p->pi_lock, flags);
+ task_rq_unlock(rq, p, &flags);
return 0;
}
diff --git a/kernel/sched/cpupri.c b/kernel/sched/cpupri.c
index d72586f..23aa789 100644
--- a/kernel/sched/cpupri.c
+++ b/kernel/sched/cpupri.c
@@ -65,8 +65,8 @@
int cpupri_find(struct cpupri *cp, struct task_struct *p,
struct cpumask *lowest_mask)
{
- int idx = 0;
- int task_pri = convert_prio(p->prio);
+ int idx = 0;
+ int task_pri = convert_prio(p->prio);
if (task_pri >= MAX_RT_PRIO)
return 0;
@@ -137,9 +137,9 @@
*/
void cpupri_set(struct cpupri *cp, int cpu, int newpri)
{
- int *currpri = &cp->cpu_to_pri[cpu];
- int oldpri = *currpri;
- int do_mb = 0;
+ int *currpri = &cp->cpu_to_pri[cpu];
+ int oldpri = *currpri;
+ int do_mb = 0;
newpri = convert_prio(newpri);
diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
index 22321db..d0cc03b 100644
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -3069,6 +3069,9 @@
int new_dst_cpu;
enum cpu_idle_type idle;
long imbalance;
+ /* The set of CPUs under consideration for load-balancing */
+ struct cpumask *cpus;
+
unsigned int flags;
unsigned int loop;
@@ -3653,8 +3656,7 @@
*/
static inline void update_sg_lb_stats(struct lb_env *env,
struct sched_group *group, int load_idx,
- int local_group, const struct cpumask *cpus,
- int *balance, struct sg_lb_stats *sgs)
+ int local_group, int *balance, struct sg_lb_stats *sgs)
{
unsigned long nr_running, max_nr_running, min_nr_running;
unsigned long load, max_cpu_load, min_cpu_load;
@@ -3671,7 +3673,7 @@
max_nr_running = 0;
min_nr_running = ~0UL;
- for_each_cpu_and(i, sched_group_cpus(group), cpus) {
+ for_each_cpu_and(i, sched_group_cpus(group), env->cpus) {
struct rq *rq = cpu_rq(i);
nr_running = rq->nr_running;
@@ -3800,8 +3802,7 @@
* @sds: variable to hold the statistics for this sched_domain.
*/
static inline void update_sd_lb_stats(struct lb_env *env,
- const struct cpumask *cpus,
- int *balance, struct sd_lb_stats *sds)
+ int *balance, struct sd_lb_stats *sds)
{
struct sched_domain *child = env->sd->child;
struct sched_group *sg = env->sd->groups;
@@ -3818,8 +3819,7 @@
local_group = cpumask_test_cpu(env->dst_cpu, sched_group_cpus(sg));
memset(&sgs, 0, sizeof(sgs));
- update_sg_lb_stats(env, sg, load_idx, local_group,
- cpus, balance, &sgs);
+ update_sg_lb_stats(env, sg, load_idx, local_group, balance, &sgs);
if (local_group && !(*balance))
return;
@@ -4055,7 +4055,6 @@
* to restore balance.
*
* @env: The load balancing environment.
- * @cpus: The set of CPUs under consideration for load-balancing.
* @balance: Pointer to a variable indicating if this_cpu
* is the appropriate cpu to perform load balancing at this_level.
*
@@ -4065,7 +4064,7 @@
* put to idle by rebalancing its tasks onto our group.
*/
static struct sched_group *
-find_busiest_group(struct lb_env *env, const struct cpumask *cpus, int *balance)
+find_busiest_group(struct lb_env *env, int *balance)
{
struct sd_lb_stats sds;
@@ -4075,7 +4074,7 @@
* Compute the various statistics relavent for load balancing at
* this level.
*/
- update_sd_lb_stats(env, cpus, balance, &sds);
+ update_sd_lb_stats(env, balance, &sds);
/*
* this_cpu is not the appropriate cpu to perform load balancing at
@@ -4155,8 +4154,7 @@
* find_busiest_queue - find the busiest runqueue among the cpus in group.
*/
static struct rq *find_busiest_queue(struct lb_env *env,
- struct sched_group *group,
- const struct cpumask *cpus)
+ struct sched_group *group)
{
struct rq *busiest = NULL, *rq;
unsigned long max_load = 0;
@@ -4171,7 +4169,7 @@
if (!capacity)
capacity = fix_small_capacity(env->sd, group);
- if (!cpumask_test_cpu(i, cpus))
+ if (!cpumask_test_cpu(i, env->cpus))
continue;
rq = cpu_rq(i);
@@ -4252,6 +4250,7 @@
.dst_grpmask = sched_group_cpus(sd->groups),
.idle = idle,
.loop_break = sched_nr_migrate_break,
+ .cpus = cpus,
};
cpumask_copy(cpus, cpu_active_mask);
@@ -4260,7 +4259,7 @@
schedstat_inc(sd, lb_count[idle]);
redo:
- group = find_busiest_group(&env, cpus, balance);
+ group = find_busiest_group(&env, balance);
if (*balance == 0)
goto out_balanced;
@@ -4270,7 +4269,7 @@
goto out_balanced;
}
- busiest = find_busiest_queue(&env, group, cpus);
+ busiest = find_busiest_queue(&env, group);
if (!busiest) {
schedstat_inc(sd, lb_nobusyq[idle]);
goto out_balanced;
diff --git a/kernel/time/jiffies.c b/kernel/time/jiffies.c
index a470154..46da053 100644
--- a/kernel/time/jiffies.c
+++ b/kernel/time/jiffies.c
@@ -37,7 +37,7 @@
* requested HZ value. It is also not recommended
* for "tick-less" systems.
*/
-#define NSEC_PER_JIFFY ((u32)((((u64)NSEC_PER_SEC)<<8)/ACTHZ))
+#define NSEC_PER_JIFFY ((u32)((((u64)NSEC_PER_SEC)<<8)/SHIFTED_HZ))
/* Since jiffies uses a simple NSEC_PER_JIFFY multiplier
* conversion, the .shift value could be zero. However
diff --git a/kernel/time/ntp.c b/kernel/time/ntp.c
index b7fbadc..24174b4 100644
--- a/kernel/time/ntp.c
+++ b/kernel/time/ntp.c
@@ -28,7 +28,7 @@
/* USER_HZ period (usecs): */
unsigned long tick_usec = TICK_USEC;
-/* ACTHZ period (nsecs): */
+/* SHIFTED_HZ period (nsecs): */
unsigned long tick_nsec;
static u64 tick_length;
diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index f045cc5..e16af19 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -65,14 +65,14 @@
* used instead.
*/
struct timespec wall_to_monotonic;
- /* time spent in suspend */
- struct timespec total_sleep_time;
- /* The raw monotonic time for the CLOCK_MONOTONIC_RAW posix clock. */
- struct timespec raw_time;
/* Offset clock monotonic -> clock realtime */
ktime_t offs_real;
+ /* time spent in suspend */
+ struct timespec total_sleep_time;
/* Offset clock monotonic -> clock boottime */
ktime_t offs_boot;
+ /* The raw monotonic time for the CLOCK_MONOTONIC_RAW posix clock. */
+ struct timespec raw_time;
/* Seqlock for all timekeeper values */
seqlock_t lock;
};
@@ -108,13 +108,38 @@
static void tk_set_xtime(struct timekeeper *tk, const struct timespec *ts)
{
tk->xtime_sec = ts->tv_sec;
- tk->xtime_nsec = ts->tv_nsec << tk->shift;
+ tk->xtime_nsec = (u64)ts->tv_nsec << tk->shift;
}
static void tk_xtime_add(struct timekeeper *tk, const struct timespec *ts)
{
tk->xtime_sec += ts->tv_sec;
- tk->xtime_nsec += ts->tv_nsec << tk->shift;
+ tk->xtime_nsec += (u64)ts->tv_nsec << tk->shift;
+}
+
+static void tk_set_wall_to_mono(struct timekeeper *tk, struct timespec wtm)
+{
+ struct timespec tmp;
+
+ /*
+ * Verify consistency of: offset_real = -wall_to_monotonic
+ * before modifying anything
+ */
+ set_normalized_timespec(&tmp, -tk->wall_to_monotonic.tv_sec,
+ -tk->wall_to_monotonic.tv_nsec);
+ WARN_ON_ONCE(tk->offs_real.tv64 != timespec_to_ktime(tmp).tv64);
+ tk->wall_to_monotonic = wtm;
+ set_normalized_timespec(&tmp, -wtm.tv_sec, -wtm.tv_nsec);
+ tk->offs_real = timespec_to_ktime(tmp);
+}
+
+static void tk_set_sleep_time(struct timekeeper *tk, struct timespec t)
+{
+ /* Verify consistency before modifying */
+ WARN_ON_ONCE(tk->offs_boot.tv64 != timespec_to_ktime(tk->total_sleep_time).tv64);
+
+ tk->total_sleep_time = t;
+ tk->offs_boot = timespec_to_ktime(t);
}
/**
@@ -217,14 +242,6 @@
return nsec + arch_gettimeoffset();
}
-static void update_rt_offset(struct timekeeper *tk)
-{
- struct timespec tmp, *wtm = &tk->wall_to_monotonic;
-
- set_normalized_timespec(&tmp, -wtm->tv_sec, -wtm->tv_nsec);
- tk->offs_real = timespec_to_ktime(tmp);
-}
-
/* must hold write on timekeeper.lock */
static void timekeeping_update(struct timekeeper *tk, bool clearntp)
{
@@ -234,12 +251,10 @@
tk->ntp_error = 0;
ntp_clear();
}
- update_rt_offset(tk);
xt = tk_xtime(tk);
update_vsyscall(&xt, &tk->wall_to_monotonic, tk->clock, tk->mult);
}
-
/**
* timekeeping_forward_now - update clock to the current time
*
@@ -277,18 +292,19 @@
*/
void getnstimeofday(struct timespec *ts)
{
+ struct timekeeper *tk = &timekeeper;
unsigned long seq;
s64 nsecs = 0;
WARN_ON(timekeeping_suspended);
do {
- seq = read_seqbegin(&timekeeper.lock);
+ seq = read_seqbegin(&tk->lock);
- ts->tv_sec = timekeeper.xtime_sec;
- ts->tv_nsec = timekeeping_get_ns(&timekeeper);
+ ts->tv_sec = tk->xtime_sec;
+ ts->tv_nsec = timekeeping_get_ns(tk);
- } while (read_seqretry(&timekeeper.lock, seq));
+ } while (read_seqretry(&tk->lock, seq));
timespec_add_ns(ts, nsecs);
}
@@ -296,19 +312,18 @@
ktime_t ktime_get(void)
{
+ struct timekeeper *tk = &timekeeper;
unsigned int seq;
s64 secs, nsecs;
WARN_ON(timekeeping_suspended);
do {
- seq = read_seqbegin(&timekeeper.lock);
- secs = timekeeper.xtime_sec +
- timekeeper.wall_to_monotonic.tv_sec;
- nsecs = timekeeping_get_ns(&timekeeper) +
- timekeeper.wall_to_monotonic.tv_nsec;
+ seq = read_seqbegin(&tk->lock);
+ secs = tk->xtime_sec + tk->wall_to_monotonic.tv_sec;
+ nsecs = timekeeping_get_ns(tk) + tk->wall_to_monotonic.tv_nsec;
- } while (read_seqretry(&timekeeper.lock, seq));
+ } while (read_seqretry(&tk->lock, seq));
/*
* Use ktime_set/ktime_add_ns to create a proper ktime on
* 32-bit architectures without CONFIG_KTIME_SCALAR.
@@ -327,18 +342,19 @@
*/
void ktime_get_ts(struct timespec *ts)
{
+ struct timekeeper *tk = &timekeeper;
struct timespec tomono;
unsigned int seq;
WARN_ON(timekeeping_suspended);
do {
- seq = read_seqbegin(&timekeeper.lock);
- ts->tv_sec = timekeeper.xtime_sec;
- ts->tv_nsec = timekeeping_get_ns(&timekeeper);
- tomono = timekeeper.wall_to_monotonic;
+ seq = read_seqbegin(&tk->lock);
+ ts->tv_sec = tk->xtime_sec;
+ ts->tv_nsec = timekeeping_get_ns(tk);
+ tomono = tk->wall_to_monotonic;
- } while (read_seqretry(&timekeeper.lock, seq));
+ } while (read_seqretry(&tk->lock, seq));
set_normalized_timespec(ts, ts->tv_sec + tomono.tv_sec,
ts->tv_nsec + tomono.tv_nsec);
@@ -358,22 +374,23 @@
*/
void getnstime_raw_and_real(struct timespec *ts_raw, struct timespec *ts_real)
{
+ struct timekeeper *tk = &timekeeper;
unsigned long seq;
s64 nsecs_raw, nsecs_real;
WARN_ON_ONCE(timekeeping_suspended);
do {
- seq = read_seqbegin(&timekeeper.lock);
+ seq = read_seqbegin(&tk->lock);
- *ts_raw = timekeeper.raw_time;
- ts_real->tv_sec = timekeeper.xtime_sec;
+ *ts_raw = tk->raw_time;
+ ts_real->tv_sec = tk->xtime_sec;
ts_real->tv_nsec = 0;
- nsecs_raw = timekeeping_get_ns_raw(&timekeeper);
- nsecs_real = timekeeping_get_ns(&timekeeper);
+ nsecs_raw = timekeeping_get_ns_raw(tk);
+ nsecs_real = timekeeping_get_ns(tk);
- } while (read_seqretry(&timekeeper.lock, seq));
+ } while (read_seqretry(&tk->lock, seq));
timespec_add_ns(ts_raw, nsecs_raw);
timespec_add_ns(ts_real, nsecs_real);
@@ -406,28 +423,28 @@
*/
int do_settimeofday(const struct timespec *tv)
{
+ struct timekeeper *tk = &timekeeper;
struct timespec ts_delta, xt;
unsigned long flags;
if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
return -EINVAL;
- write_seqlock_irqsave(&timekeeper.lock, flags);
+ write_seqlock_irqsave(&tk->lock, flags);
- timekeeping_forward_now(&timekeeper);
+ timekeeping_forward_now(tk);
- xt = tk_xtime(&timekeeper);
+ xt = tk_xtime(tk);
ts_delta.tv_sec = tv->tv_sec - xt.tv_sec;
ts_delta.tv_nsec = tv->tv_nsec - xt.tv_nsec;
- timekeeper.wall_to_monotonic =
- timespec_sub(timekeeper.wall_to_monotonic, ts_delta);
+ tk_set_wall_to_mono(tk, timespec_sub(tk->wall_to_monotonic, ts_delta));
- tk_set_xtime(&timekeeper, tv);
+ tk_set_xtime(tk, tv);
- timekeeping_update(&timekeeper, true);
+ timekeeping_update(tk, true);
- write_sequnlock_irqrestore(&timekeeper.lock, flags);
+ write_sequnlock_irqrestore(&tk->lock, flags);
/* signal hrtimers about time change */
clock_was_set();
@@ -436,7 +453,6 @@
}
EXPORT_SYMBOL(do_settimeofday);
-
/**
* timekeeping_inject_offset - Adds or subtracts from the current time.
* @tv: pointer to the timespec variable containing the offset
@@ -445,23 +461,23 @@
*/
int timekeeping_inject_offset(struct timespec *ts)
{
+ struct timekeeper *tk = &timekeeper;
unsigned long flags;
if ((unsigned long)ts->tv_nsec >= NSEC_PER_SEC)
return -EINVAL;
- write_seqlock_irqsave(&timekeeper.lock, flags);
+ write_seqlock_irqsave(&tk->lock, flags);
- timekeeping_forward_now(&timekeeper);
+ timekeeping_forward_now(tk);
- tk_xtime_add(&timekeeper, ts);
- timekeeper.wall_to_monotonic =
- timespec_sub(timekeeper.wall_to_monotonic, *ts);
+ tk_xtime_add(tk, ts);
+ tk_set_wall_to_mono(tk, timespec_sub(tk->wall_to_monotonic, *ts));
- timekeeping_update(&timekeeper, true);
+ timekeeping_update(tk, true);
- write_sequnlock_irqrestore(&timekeeper.lock, flags);
+ write_sequnlock_irqrestore(&tk->lock, flags);
/* signal hrtimers about time change */
clock_was_set();
@@ -477,23 +493,24 @@
*/
static int change_clocksource(void *data)
{
+ struct timekeeper *tk = &timekeeper;
struct clocksource *new, *old;
unsigned long flags;
new = (struct clocksource *) data;
- write_seqlock_irqsave(&timekeeper.lock, flags);
+ write_seqlock_irqsave(&tk->lock, flags);
- timekeeping_forward_now(&timekeeper);
+ timekeeping_forward_now(tk);
if (!new->enable || new->enable(new) == 0) {
- old = timekeeper.clock;
- tk_setup_internals(&timekeeper, new);
+ old = tk->clock;
+ tk_setup_internals(tk, new);
if (old->disable)
old->disable(old);
}
- timekeeping_update(&timekeeper, true);
+ timekeeping_update(tk, true);
- write_sequnlock_irqrestore(&timekeeper.lock, flags);
+ write_sequnlock_irqrestore(&tk->lock, flags);
return 0;
}
@@ -507,7 +524,9 @@
*/
void timekeeping_notify(struct clocksource *clock)
{
- if (timekeeper.clock == clock)
+ struct timekeeper *tk = &timekeeper;
+
+ if (tk->clock == clock)
return;
stop_machine(change_clocksource, clock, NULL);
tick_clock_notify();
@@ -536,35 +555,36 @@
*/
void getrawmonotonic(struct timespec *ts)
{
+ struct timekeeper *tk = &timekeeper;
unsigned long seq;
s64 nsecs;
do {
- seq = read_seqbegin(&timekeeper.lock);
- nsecs = timekeeping_get_ns_raw(&timekeeper);
- *ts = timekeeper.raw_time;
+ seq = read_seqbegin(&tk->lock);
+ nsecs = timekeeping_get_ns_raw(tk);
+ *ts = tk->raw_time;
- } while (read_seqretry(&timekeeper.lock, seq));
+ } while (read_seqretry(&tk->lock, seq));
timespec_add_ns(ts, nsecs);
}
EXPORT_SYMBOL(getrawmonotonic);
-
/**
* timekeeping_valid_for_hres - Check if timekeeping is suitable for hres
*/
int timekeeping_valid_for_hres(void)
{
+ struct timekeeper *tk = &timekeeper;
unsigned long seq;
int ret;
do {
- seq = read_seqbegin(&timekeeper.lock);
+ seq = read_seqbegin(&tk->lock);
- ret = timekeeper.clock->flags & CLOCK_SOURCE_VALID_FOR_HRES;
+ ret = tk->clock->flags & CLOCK_SOURCE_VALID_FOR_HRES;
- } while (read_seqretry(&timekeeper.lock, seq));
+ } while (read_seqretry(&tk->lock, seq));
return ret;
}
@@ -574,15 +594,16 @@
*/
u64 timekeeping_max_deferment(void)
{
+ struct timekeeper *tk = &timekeeper;
unsigned long seq;
u64 ret;
do {
- seq = read_seqbegin(&timekeeper.lock);
+ seq = read_seqbegin(&tk->lock);
- ret = timekeeper.clock->max_idle_ns;
+ ret = tk->clock->max_idle_ns;
- } while (read_seqretry(&timekeeper.lock, seq));
+ } while (read_seqretry(&tk->lock, seq));
return ret;
}
@@ -622,46 +643,43 @@
*/
void __init timekeeping_init(void)
{
+ struct timekeeper *tk = &timekeeper;
struct clocksource *clock;
unsigned long flags;
- struct timespec now, boot;
+ struct timespec now, boot, tmp;
read_persistent_clock(&now);
read_boot_clock(&boot);
- seqlock_init(&timekeeper.lock);
+ seqlock_init(&tk->lock);
ntp_init();
- write_seqlock_irqsave(&timekeeper.lock, flags);
+ write_seqlock_irqsave(&tk->lock, flags);
clock = clocksource_default_clock();
if (clock->enable)
clock->enable(clock);
- tk_setup_internals(&timekeeper, clock);
+ tk_setup_internals(tk, clock);
- tk_set_xtime(&timekeeper, &now);
- timekeeper.raw_time.tv_sec = 0;
- timekeeper.raw_time.tv_nsec = 0;
+ tk_set_xtime(tk, &now);
+ tk->raw_time.tv_sec = 0;
+ tk->raw_time.tv_nsec = 0;
if (boot.tv_sec == 0 && boot.tv_nsec == 0)
- boot = tk_xtime(&timekeeper);
+ boot = tk_xtime(tk);
- set_normalized_timespec(&timekeeper.wall_to_monotonic,
- -boot.tv_sec, -boot.tv_nsec);
- update_rt_offset(&timekeeper);
- timekeeper.total_sleep_time.tv_sec = 0;
- timekeeper.total_sleep_time.tv_nsec = 0;
- write_sequnlock_irqrestore(&timekeeper.lock, flags);
+ set_normalized_timespec(&tmp, -boot.tv_sec, -boot.tv_nsec);
+ tk_set_wall_to_mono(tk, tmp);
+
+ tmp.tv_sec = 0;
+ tmp.tv_nsec = 0;
+ tk_set_sleep_time(tk, tmp);
+
+ write_sequnlock_irqrestore(&tk->lock, flags);
}
/* time in seconds when suspend began */
static struct timespec timekeeping_suspend_time;
-static void update_sleep_time(struct timespec t)
-{
- timekeeper.total_sleep_time = t;
- timekeeper.offs_boot = timespec_to_ktime(t);
-}
-
/**
* __timekeeping_inject_sleeptime - Internal function to add sleep interval
* @delta: pointer to a timespec delta value
@@ -677,13 +695,11 @@
"sleep delta value!\n");
return;
}
-
tk_xtime_add(tk, delta);
- tk->wall_to_monotonic = timespec_sub(tk->wall_to_monotonic, *delta);
- update_sleep_time(timespec_add(tk->total_sleep_time, *delta));
+ tk_set_wall_to_mono(tk, timespec_sub(tk->wall_to_monotonic, *delta));
+ tk_set_sleep_time(tk, timespec_add(tk->total_sleep_time, *delta));
}
-
/**
* timekeeping_inject_sleeptime - Adds suspend interval to timeekeeping values
* @delta: pointer to a timespec delta value
@@ -696,6 +712,7 @@
*/
void timekeeping_inject_sleeptime(struct timespec *delta)
{
+ struct timekeeper *tk = &timekeeper;
unsigned long flags;
struct timespec ts;
@@ -704,21 +721,20 @@
if (!(ts.tv_sec == 0 && ts.tv_nsec == 0))
return;
- write_seqlock_irqsave(&timekeeper.lock, flags);
+ write_seqlock_irqsave(&tk->lock, flags);
- timekeeping_forward_now(&timekeeper);
+ timekeeping_forward_now(tk);
- __timekeeping_inject_sleeptime(&timekeeper, delta);
+ __timekeeping_inject_sleeptime(tk, delta);
- timekeeping_update(&timekeeper, true);
+ timekeeping_update(tk, true);
- write_sequnlock_irqrestore(&timekeeper.lock, flags);
+ write_sequnlock_irqrestore(&tk->lock, flags);
/* signal hrtimers about time change */
clock_was_set();
}
-
/**
* timekeeping_resume - Resumes the generic timekeeping subsystem.
*
@@ -728,6 +744,7 @@
*/
static void timekeeping_resume(void)
{
+ struct timekeeper *tk = &timekeeper;
unsigned long flags;
struct timespec ts;
@@ -735,18 +752,18 @@
clocksource_resume();
- write_seqlock_irqsave(&timekeeper.lock, flags);
+ write_seqlock_irqsave(&tk->lock, flags);
if (timespec_compare(&ts, &timekeeping_suspend_time) > 0) {
ts = timespec_sub(ts, timekeeping_suspend_time);
- __timekeeping_inject_sleeptime(&timekeeper, &ts);
+ __timekeeping_inject_sleeptime(tk, &ts);
}
/* re-base the last cycle value */
- timekeeper.clock->cycle_last = timekeeper.clock->read(timekeeper.clock);
- timekeeper.ntp_error = 0;
+ tk->clock->cycle_last = tk->clock->read(tk->clock);
+ tk->ntp_error = 0;
timekeeping_suspended = 0;
- timekeeping_update(&timekeeper, false);
- write_sequnlock_irqrestore(&timekeeper.lock, flags);
+ timekeeping_update(tk, false);
+ write_sequnlock_irqrestore(&tk->lock, flags);
touch_softlockup_watchdog();
@@ -758,14 +775,15 @@
static int timekeeping_suspend(void)
{
+ struct timekeeper *tk = &timekeeper;
unsigned long flags;
struct timespec delta, delta_delta;
static struct timespec old_delta;
read_persistent_clock(&timekeeping_suspend_time);
- write_seqlock_irqsave(&timekeeper.lock, flags);
- timekeeping_forward_now(&timekeeper);
+ write_seqlock_irqsave(&tk->lock, flags);
+ timekeeping_forward_now(tk);
timekeeping_suspended = 1;
/*
@@ -774,7 +792,7 @@
* try to compensate so the difference in system time
* and persistent_clock time stays close to constant.
*/
- delta = timespec_sub(tk_xtime(&timekeeper), timekeeping_suspend_time);
+ delta = timespec_sub(tk_xtime(tk), timekeeping_suspend_time);
delta_delta = timespec_sub(delta, old_delta);
if (abs(delta_delta.tv_sec) >= 2) {
/*
@@ -787,7 +805,7 @@
timekeeping_suspend_time =
timespec_add(timekeeping_suspend_time, delta_delta);
}
- write_sequnlock_irqrestore(&timekeeper.lock, flags);
+ write_sequnlock_irqrestore(&tk->lock, flags);
clockevents_notify(CLOCK_EVT_NOTIFY_SUSPEND, NULL);
clocksource_suspend();
@@ -898,27 +916,29 @@
* the error. This causes the likely below to be unlikely.
*
* The proper fix is to avoid rounding up by using
- * the high precision timekeeper.xtime_nsec instead of
+ * the high precision tk->xtime_nsec instead of
* xtime.tv_nsec everywhere. Fixing this will take some
* time.
*/
if (likely(error <= interval))
adj = 1;
else
- adj = timekeeping_bigadjust(tk, error, &interval,
- &offset);
- } else if (error < -interval) {
- /* See comment above, this is just switched for the negative */
- error >>= 2;
- if (likely(error >= -interval)) {
- adj = -1;
- interval = -interval;
- offset = -offset;
- } else
- adj = timekeeping_bigadjust(tk, error, &interval,
- &offset);
- } else
- return;
+ adj = timekeeping_bigadjust(tk, error, &interval, &offset);
+ } else {
+ if (error < -interval) {
+ /* See comment above, this is just switched for the negative */
+ error >>= 2;
+ if (likely(error >= -interval)) {
+ adj = -1;
+ interval = -interval;
+ offset = -offset;
+ } else {
+ adj = timekeeping_bigadjust(tk, error, &interval, &offset);
+ }
+ } else {
+ goto out_adjust;
+ }
+ }
if (unlikely(tk->clock->maxadj &&
(tk->mult + adj > tk->clock->mult + tk->clock->maxadj))) {
@@ -981,6 +1001,7 @@
tk->xtime_nsec -= offset;
tk->ntp_error -= (interval - offset) << tk->ntp_error_shift;
+out_adjust:
/*
* It may be possible that when we entered this function, xtime_nsec
* was very small. Further, if we're slightly speeding the clocksource
@@ -1003,7 +1024,6 @@
}
-
/**
* accumulate_nsecs_to_secs - Accumulates nsecs into secs
*
@@ -1024,15 +1044,21 @@
/* Figure out if its a leap sec and apply if needed */
leap = second_overflow(tk->xtime_sec);
- tk->xtime_sec += leap;
- tk->wall_to_monotonic.tv_sec -= leap;
- if (leap)
- clock_was_set_delayed();
+ if (unlikely(leap)) {
+ struct timespec ts;
+ tk->xtime_sec += leap;
+
+ ts.tv_sec = leap;
+ ts.tv_nsec = 0;
+ tk_set_wall_to_mono(tk,
+ timespec_sub(tk->wall_to_monotonic, ts));
+
+ clock_was_set_delayed();
+ }
}
}
-
/**
* logarithmic_accumulation - shifted accumulation of cycles
*
@@ -1076,7 +1102,6 @@
return offset;
}
-
/**
* update_wall_time - Uses the current clocksource to increment the wall time
*
@@ -1084,21 +1109,22 @@
static void update_wall_time(void)
{
struct clocksource *clock;
+ struct timekeeper *tk = &timekeeper;
cycle_t offset;
int shift = 0, maxshift;
unsigned long flags;
s64 remainder;
- write_seqlock_irqsave(&timekeeper.lock, flags);
+ write_seqlock_irqsave(&tk->lock, flags);
/* Make sure we're fully resumed: */
if (unlikely(timekeeping_suspended))
goto out;
- clock = timekeeper.clock;
+ clock = tk->clock;
#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
- offset = timekeeper.cycle_interval;
+ offset = tk->cycle_interval;
#else
offset = (clock->read(clock) - clock->cycle_last) & clock->mask;
#endif
@@ -1111,19 +1137,19 @@
* chunk in one go, and then try to consume the next smaller
* doubled multiple.
*/
- shift = ilog2(offset) - ilog2(timekeeper.cycle_interval);
+ shift = ilog2(offset) - ilog2(tk->cycle_interval);
shift = max(0, shift);
/* Bound shift to one less than what overflows tick_length */
maxshift = (64 - (ilog2(ntp_tick_length())+1)) - 1;
shift = min(shift, maxshift);
- while (offset >= timekeeper.cycle_interval) {
- offset = logarithmic_accumulation(&timekeeper, offset, shift);
- if(offset < timekeeper.cycle_interval<<shift)
+ while (offset >= tk->cycle_interval) {
+ offset = logarithmic_accumulation(tk, offset, shift);
+ if (offset < tk->cycle_interval<<shift)
shift--;
}
/* correct the clock when NTP error is too big */
- timekeeping_adjust(&timekeeper, offset);
+ timekeeping_adjust(tk, offset);
/*
@@ -1135,21 +1161,21 @@
* the vsyscall implementations are converted to use xtime_nsec
* (shifted nanoseconds), this can be killed.
*/
- remainder = timekeeper.xtime_nsec & ((1 << timekeeper.shift) - 1);
- timekeeper.xtime_nsec -= remainder;
- timekeeper.xtime_nsec += 1 << timekeeper.shift;
- timekeeper.ntp_error += remainder << timekeeper.ntp_error_shift;
+ remainder = tk->xtime_nsec & ((1 << tk->shift) - 1);
+ tk->xtime_nsec -= remainder;
+ tk->xtime_nsec += 1 << tk->shift;
+ tk->ntp_error += remainder << tk->ntp_error_shift;
/*
* Finally, make sure that after the rounding
* xtime_nsec isn't larger than NSEC_PER_SEC
*/
- accumulate_nsecs_to_secs(&timekeeper);
+ accumulate_nsecs_to_secs(tk);
- timekeeping_update(&timekeeper, false);
+ timekeeping_update(tk, false);
out:
- write_sequnlock_irqrestore(&timekeeper.lock, flags);
+ write_sequnlock_irqrestore(&tk->lock, flags);
}
@@ -1166,18 +1192,18 @@
*/
void getboottime(struct timespec *ts)
{
+ struct timekeeper *tk = &timekeeper;
struct timespec boottime = {
- .tv_sec = timekeeper.wall_to_monotonic.tv_sec +
- timekeeper.total_sleep_time.tv_sec,
- .tv_nsec = timekeeper.wall_to_monotonic.tv_nsec +
- timekeeper.total_sleep_time.tv_nsec
+ .tv_sec = tk->wall_to_monotonic.tv_sec +
+ tk->total_sleep_time.tv_sec,
+ .tv_nsec = tk->wall_to_monotonic.tv_nsec +
+ tk->total_sleep_time.tv_nsec
};
set_normalized_timespec(ts, -boottime.tv_sec, -boottime.tv_nsec);
}
EXPORT_SYMBOL_GPL(getboottime);
-
/**
* get_monotonic_boottime - Returns monotonic time since boot
* @ts: pointer to the timespec to be set
@@ -1189,19 +1215,20 @@
*/
void get_monotonic_boottime(struct timespec *ts)
{
+ struct timekeeper *tk = &timekeeper;
struct timespec tomono, sleep;
unsigned int seq;
WARN_ON(timekeeping_suspended);
do {
- seq = read_seqbegin(&timekeeper.lock);
- ts->tv_sec = timekeeper.xtime_sec;
- ts->tv_nsec = timekeeping_get_ns(&timekeeper);
- tomono = timekeeper.wall_to_monotonic;
- sleep = timekeeper.total_sleep_time;
+ seq = read_seqbegin(&tk->lock);
+ ts->tv_sec = tk->xtime_sec;
+ ts->tv_nsec = timekeeping_get_ns(tk);
+ tomono = tk->wall_to_monotonic;
+ sleep = tk->total_sleep_time;
- } while (read_seqretry(&timekeeper.lock, seq));
+ } while (read_seqretry(&tk->lock, seq));
set_normalized_timespec(ts, ts->tv_sec + tomono.tv_sec + sleep.tv_sec,
ts->tv_nsec + tomono.tv_nsec + sleep.tv_nsec);
@@ -1231,31 +1258,38 @@
*/
void monotonic_to_bootbased(struct timespec *ts)
{
- *ts = timespec_add(*ts, timekeeper.total_sleep_time);
+ struct timekeeper *tk = &timekeeper;
+
+ *ts = timespec_add(*ts, tk->total_sleep_time);
}
EXPORT_SYMBOL_GPL(monotonic_to_bootbased);
unsigned long get_seconds(void)
{
- return timekeeper.xtime_sec;
+ struct timekeeper *tk = &timekeeper;
+
+ return tk->xtime_sec;
}
EXPORT_SYMBOL(get_seconds);
struct timespec __current_kernel_time(void)
{
- return tk_xtime(&timekeeper);
+ struct timekeeper *tk = &timekeeper;
+
+ return tk_xtime(tk);
}
struct timespec current_kernel_time(void)
{
+ struct timekeeper *tk = &timekeeper;
struct timespec now;
unsigned long seq;
do {
- seq = read_seqbegin(&timekeeper.lock);
+ seq = read_seqbegin(&tk->lock);
- now = tk_xtime(&timekeeper);
- } while (read_seqretry(&timekeeper.lock, seq));
+ now = tk_xtime(tk);
+ } while (read_seqretry(&tk->lock, seq));
return now;
}
@@ -1263,15 +1297,16 @@
struct timespec get_monotonic_coarse(void)
{
+ struct timekeeper *tk = &timekeeper;
struct timespec now, mono;
unsigned long seq;
do {
- seq = read_seqbegin(&timekeeper.lock);
+ seq = read_seqbegin(&tk->lock);
- now = tk_xtime(&timekeeper);
- mono = timekeeper.wall_to_monotonic;
- } while (read_seqretry(&timekeeper.lock, seq));
+ now = tk_xtime(tk);
+ mono = tk->wall_to_monotonic;
+ } while (read_seqretry(&tk->lock, seq));
set_normalized_timespec(&now, now.tv_sec + mono.tv_sec,
now.tv_nsec + mono.tv_nsec);
@@ -1300,14 +1335,15 @@
void get_xtime_and_monotonic_and_sleep_offset(struct timespec *xtim,
struct timespec *wtom, struct timespec *sleep)
{
+ struct timekeeper *tk = &timekeeper;
unsigned long seq;
do {
- seq = read_seqbegin(&timekeeper.lock);
- *xtim = tk_xtime(&timekeeper);
- *wtom = timekeeper.wall_to_monotonic;
- *sleep = timekeeper.total_sleep_time;
- } while (read_seqretry(&timekeeper.lock, seq));
+ seq = read_seqbegin(&tk->lock);
+ *xtim = tk_xtime(tk);
+ *wtom = tk->wall_to_monotonic;
+ *sleep = tk->total_sleep_time;
+ } while (read_seqretry(&tk->lock, seq));
}
#ifdef CONFIG_HIGH_RES_TIMERS
@@ -1321,19 +1357,20 @@
*/
ktime_t ktime_get_update_offsets(ktime_t *offs_real, ktime_t *offs_boot)
{
+ struct timekeeper *tk = &timekeeper;
ktime_t now;
unsigned int seq;
u64 secs, nsecs;
do {
- seq = read_seqbegin(&timekeeper.lock);
+ seq = read_seqbegin(&tk->lock);
- secs = timekeeper.xtime_sec;
- nsecs = timekeeping_get_ns(&timekeeper);
+ secs = tk->xtime_sec;
+ nsecs = timekeeping_get_ns(tk);
- *offs_real = timekeeper.offs_real;
- *offs_boot = timekeeper.offs_boot;
- } while (read_seqretry(&timekeeper.lock, seq));
+ *offs_real = tk->offs_real;
+ *offs_boot = tk->offs_boot;
+ } while (read_seqretry(&tk->lock, seq));
now = ktime_add_ns(ktime_set(secs, 0), nsecs);
now = ktime_sub(now, *offs_real);
@@ -1346,19 +1383,19 @@
*/
ktime_t ktime_get_monotonic_offset(void)
{
+ struct timekeeper *tk = &timekeeper;
unsigned long seq;
struct timespec wtom;
do {
- seq = read_seqbegin(&timekeeper.lock);
- wtom = timekeeper.wall_to_monotonic;
- } while (read_seqretry(&timekeeper.lock, seq));
+ seq = read_seqbegin(&tk->lock);
+ wtom = tk->wall_to_monotonic;
+ } while (read_seqretry(&tk->lock, seq));
return timespec_to_ktime(wtom);
}
EXPORT_SYMBOL_GPL(ktime_get_monotonic_offset);
-
/**
* xtime_update() - advances the timekeeping infrastructure
* @ticks: number of ticks, that have elapsed since the last call.
diff --git a/kernel/trace/trace_event_perf.c b/kernel/trace/trace_event_perf.c
index fee3752..8a6d2ee 100644
--- a/kernel/trace/trace_event_perf.c
+++ b/kernel/trace/trace_event_perf.c
@@ -281,7 +281,7 @@
head = this_cpu_ptr(event_function.perf_events);
perf_trace_buf_submit(entry, ENTRY_SIZE, rctx, 0,
- 1, ®s, head);
+ 1, ®s, head, NULL);
#undef ENTRY_SIZE
}
diff --git a/kernel/trace/trace_kprobe.c b/kernel/trace/trace_kprobe.c
index b31d3d5..1a21170 100644
--- a/kernel/trace/trace_kprobe.c
+++ b/kernel/trace/trace_kprobe.c
@@ -1002,7 +1002,8 @@
store_trace_args(sizeof(*entry), tp, regs, (u8 *)&entry[1], dsize);
head = this_cpu_ptr(call->perf_events);
- perf_trace_buf_submit(entry, size, rctx, entry->ip, 1, regs, head);
+ perf_trace_buf_submit(entry, size, rctx,
+ entry->ip, 1, regs, head, NULL);
}
/* Kretprobe profile handler */
@@ -1033,7 +1034,8 @@
store_trace_args(sizeof(*entry), tp, regs, (u8 *)&entry[1], dsize);
head = this_cpu_ptr(call->perf_events);
- perf_trace_buf_submit(entry, size, rctx, entry->ret_ip, 1, regs, head);
+ perf_trace_buf_submit(entry, size, rctx,
+ entry->ret_ip, 1, regs, head, NULL);
}
#endif /* CONFIG_PERF_EVENTS */
diff --git a/kernel/trace/trace_syscalls.c b/kernel/trace/trace_syscalls.c
index 96fc733..60e4d78 100644
--- a/kernel/trace/trace_syscalls.c
+++ b/kernel/trace/trace_syscalls.c
@@ -532,7 +532,7 @@
(unsigned long *)&rec->args);
head = this_cpu_ptr(sys_data->enter_event->perf_events);
- perf_trace_buf_submit(rec, size, rctx, 0, 1, regs, head);
+ perf_trace_buf_submit(rec, size, rctx, 0, 1, regs, head, NULL);
}
int perf_sysenter_enable(struct ftrace_event_call *call)
@@ -608,7 +608,7 @@
rec->ret = syscall_get_return_value(current, regs);
head = this_cpu_ptr(sys_data->exit_event->perf_events);
- perf_trace_buf_submit(rec, size, rctx, 0, 1, regs, head);
+ perf_trace_buf_submit(rec, size, rctx, 0, 1, regs, head, NULL);
}
int perf_sysexit_enable(struct ftrace_event_call *call)
diff --git a/kernel/trace/trace_uprobe.c b/kernel/trace/trace_uprobe.c
index 2b36ac6..03003cd 100644
--- a/kernel/trace/trace_uprobe.c
+++ b/kernel/trace/trace_uprobe.c
@@ -670,7 +670,7 @@
call_fetch(&tu->args[i].fetch, regs, data + tu->args[i].offset);
head = this_cpu_ptr(call->perf_events);
- perf_trace_buf_submit(entry, size, rctx, entry->ip, 1, regs, head);
+ perf_trace_buf_submit(entry, size, rctx, entry->ip, 1, regs, head, NULL);
out:
preempt_enable();
diff --git a/mm/backing-dev.c b/mm/backing-dev.c
index 6b4718e..b41823c 100644
--- a/mm/backing-dev.c
+++ b/mm/backing-dev.c
@@ -39,12 +39,6 @@
LIST_HEAD(bdi_list);
LIST_HEAD(bdi_pending_list);
-static struct task_struct *sync_supers_tsk;
-static struct timer_list sync_supers_timer;
-
-static int bdi_sync_supers(void *);
-static void sync_supers_timer_fn(unsigned long);
-
void bdi_lock_two(struct bdi_writeback *wb1, struct bdi_writeback *wb2)
{
if (wb1 < wb2) {
@@ -250,12 +244,6 @@
{
int err;
- sync_supers_tsk = kthread_run(bdi_sync_supers, NULL, "sync_supers");
- BUG_ON(IS_ERR(sync_supers_tsk));
-
- setup_timer(&sync_supers_timer, sync_supers_timer_fn, 0);
- bdi_arm_supers_timer();
-
err = bdi_init(&default_backing_dev_info);
if (!err)
bdi_register(&default_backing_dev_info, NULL, "default");
@@ -270,46 +258,6 @@
return wb_has_dirty_io(&bdi->wb);
}
-/*
- * kupdated() used to do this. We cannot do it from the bdi_forker_thread()
- * or we risk deadlocking on ->s_umount. The longer term solution would be
- * to implement sync_supers_bdi() or similar and simply do it from the
- * bdi writeback thread individually.
- */
-static int bdi_sync_supers(void *unused)
-{
- set_user_nice(current, 0);
-
- while (!kthread_should_stop()) {
- set_current_state(TASK_INTERRUPTIBLE);
- schedule();
-
- /*
- * Do this periodically, like kupdated() did before.
- */
- sync_supers();
- }
-
- return 0;
-}
-
-void bdi_arm_supers_timer(void)
-{
- unsigned long next;
-
- if (!dirty_writeback_interval)
- return;
-
- next = msecs_to_jiffies(dirty_writeback_interval * 10) + jiffies;
- mod_timer(&sync_supers_timer, round_jiffies_up(next));
-}
-
-static void sync_supers_timer_fn(unsigned long unused)
-{
- wake_up_process(sync_supers_tsk);
- bdi_arm_supers_timer();
-}
-
static void wakeup_timer_fn(unsigned long data)
{
struct backing_dev_info *bdi = (struct backing_dev_info *)data;
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index e5363f3..5ad5ce2 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -1532,7 +1532,6 @@
void __user *buffer, size_t *length, loff_t *ppos)
{
proc_dointvec(table, write, buffer, length, ppos);
- bdi_arm_supers_timer();
return 0;
}
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 889532b..009ac28 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -4511,7 +4511,7 @@
pg_data_t *pgdat = NODE_DATA(nid);
/* pg_data_t should be reset to zero when it's allocated */
- WARN_ON(pgdat->nr_zones || pgdat->node_start_pfn || pgdat->classzone_idx);
+ WARN_ON(pgdat->nr_zones || pgdat->classzone_idx);
pgdat->node_id = nid;
pgdat->node_start_pfn = node_start_pfn;
diff --git a/net/ceph/crypto.c b/net/ceph/crypto.c
index b780cb7..9da7fdd 100644
--- a/net/ceph/crypto.c
+++ b/net/ceph/crypto.c
@@ -466,6 +466,7 @@
struct ceph_crypto_key *ckey = key->payload.data;
ceph_crypto_key_destroy(ckey);
+ kfree(ckey);
}
struct key_type key_type_ceph = {
diff --git a/net/ceph/crypto.h b/net/ceph/crypto.h
index 1919d15..3572dc5 100644
--- a/net/ceph/crypto.h
+++ b/net/ceph/crypto.h
@@ -16,7 +16,8 @@
static inline void ceph_crypto_key_destroy(struct ceph_crypto_key *key)
{
- kfree(key->key);
+ if (key)
+ kfree(key->key);
}
extern int ceph_crypto_key_clone(struct ceph_crypto_key *dst,
diff --git a/sound/core/sgbuf.c b/sound/core/sgbuf.c
index 4e7ec2b..d0f0035 100644
--- a/sound/core/sgbuf.c
+++ b/sound/core/sgbuf.c
@@ -101,7 +101,7 @@
if (snd_dma_alloc_pages_fallback(SNDRV_DMA_TYPE_DEV, device,
chunk, &tmpb) < 0) {
if (!sgbuf->pages)
- return NULL;
+ goto _failed;
if (!res_size)
goto _failed;
size = sgbuf->pages * PAGE_SIZE;
diff --git a/sound/pci/emu10k1/memory.c b/sound/pci/emu10k1/memory.c
index 4f502a2..0a43662 100644
--- a/sound/pci/emu10k1/memory.c
+++ b/sound/pci/emu10k1/memory.c
@@ -326,7 +326,10 @@
for (page = blk->first_page; page <= blk->last_page; page++, idx++) {
unsigned long ofs = idx << PAGE_SHIFT;
dma_addr_t addr;
- addr = snd_pcm_sgbuf_get_addr(substream, ofs);
+ if (ofs >= runtime->dma_bytes)
+ addr = emu->silent_page.addr;
+ else
+ addr = snd_pcm_sgbuf_get_addr(substream, ofs);
if (! is_valid_page(emu, addr)) {
printk(KERN_ERR "emu: failure page = %d\n", idx);
mutex_unlock(&hdr->block_mutex);
diff --git a/sound/pci/hda/hda_auto_parser.c b/sound/pci/hda/hda_auto_parser.c
index 647218d..4f7d2df 100644
--- a/sound/pci/hda/hda_auto_parser.c
+++ b/sound/pci/hda/hda_auto_parser.c
@@ -332,13 +332,12 @@
if (cfg->dig_outs)
snd_printd(" dig-out=0x%x/0x%x\n",
cfg->dig_out_pins[0], cfg->dig_out_pins[1]);
- snd_printd(" inputs:");
+ snd_printd(" inputs:\n");
for (i = 0; i < cfg->num_inputs; i++) {
- snd_printd(" %s=0x%x",
+ snd_printd(" %s=0x%x\n",
hda_get_autocfg_input_label(codec, cfg, i),
cfg->inputs[i].pin);
}
- snd_printd("\n");
if (cfg->dig_in_pin)
snd_printd(" dig-in=0x%x\n", cfg->dig_in_pin);
diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c
index 1436118..5e22a8f 100644
--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -2967,12 +2967,10 @@
};
static const struct snd_pci_quirk cxt5066_cfg_tbl[] = {
- SND_PCI_QUIRK(0x1025, 0x054c, "Acer Aspire 3830TG", CXT5066_AUTO),
SND_PCI_QUIRK_MASK(0x1025, 0xff00, 0x0400, "Acer", CXT5066_IDEAPAD),
SND_PCI_QUIRK(0x1028, 0x02d8, "Dell Vostro", CXT5066_DELL_VOSTRO),
SND_PCI_QUIRK(0x1028, 0x02f5, "Dell Vostro 320", CXT5066_IDEAPAD),
SND_PCI_QUIRK(0x1028, 0x0401, "Dell Vostro 1014", CXT5066_DELL_VOSTRO),
- SND_PCI_QUIRK(0x1028, 0x0402, "Dell Vostro", CXT5066_DELL_VOSTRO),
SND_PCI_QUIRK(0x1028, 0x0408, "Dell Inspiron One 19T", CXT5066_IDEAPAD),
SND_PCI_QUIRK(0x1028, 0x050f, "Dell Inspiron", CXT5066_IDEAPAD),
SND_PCI_QUIRK(0x1028, 0x0510, "Dell Vostro", CXT5066_IDEAPAD),
@@ -2988,14 +2986,10 @@
SND_PCI_QUIRK(0x17aa, 0x20f2, "Lenovo T400s", CXT5066_THINKPAD),
SND_PCI_QUIRK(0x17aa, 0x21c5, "Thinkpad Edge 13", CXT5066_THINKPAD),
SND_PCI_QUIRK(0x17aa, 0x21c6, "Thinkpad Edge 13", CXT5066_ASUS),
- SND_PCI_QUIRK(0x17aa, 0x215e, "Lenovo T510", CXT5066_AUTO),
- SND_PCI_QUIRK(0x17aa, 0x21cf, "Lenovo T520 & W520", CXT5066_AUTO),
SND_PCI_QUIRK(0x17aa, 0x21da, "Lenovo X220", CXT5066_THINKPAD),
SND_PCI_QUIRK(0x17aa, 0x21db, "Lenovo X220-tablet", CXT5066_THINKPAD),
SND_PCI_QUIRK(0x17aa, 0x3a0d, "Lenovo U350", CXT5066_ASUS),
SND_PCI_QUIRK(0x17aa, 0x38af, "Lenovo G560", CXT5066_ASUS),
- SND_PCI_QUIRK(0x17aa, 0x3938, "Lenovo G565", CXT5066_AUTO),
- SND_PCI_QUIRK(0x1b0a, 0x2092, "CyberpowerPC Gamer Xplorer N57001", CXT5066_AUTO),
{}
};
diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
index 69b9284..8f23374 100644
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -877,8 +877,6 @@
struct hdmi_eld *eld;
struct hdmi_spec_per_cvt *per_cvt = NULL;
- hinfo->nid = 0; /* clear the leftover value */
-
/* Validate hinfo */
pin_idx = hinfo_to_pin_index(spec, hinfo);
if (snd_BUG_ON(pin_idx < 0))
@@ -1163,6 +1161,14 @@
return hdmi_setup_stream(codec, cvt_nid, pin_nid, stream_tag, format);
}
+static int generic_hdmi_playback_pcm_cleanup(struct hda_pcm_stream *hinfo,
+ struct hda_codec *codec,
+ struct snd_pcm_substream *substream)
+{
+ snd_hda_codec_cleanup_stream(codec, hinfo->nid);
+ return 0;
+}
+
static int hdmi_pcm_close(struct hda_pcm_stream *hinfo,
struct hda_codec *codec,
struct snd_pcm_substream *substream)
@@ -1202,6 +1208,7 @@
.open = hdmi_pcm_open,
.close = hdmi_pcm_close,
.prepare = generic_hdmi_playback_pcm_prepare,
+ .cleanup = generic_hdmi_playback_pcm_cleanup,
};
static int generic_hdmi_build_pcms(struct hda_codec *codec)
@@ -1220,7 +1227,6 @@
pstr = &info->stream[SNDRV_PCM_STREAM_PLAYBACK];
pstr->substreams = 1;
pstr->ops = generic_ops;
- pstr->nid = 1; /* FIXME: just for avoiding a debug WARNING */
/* other pstr fields are set in open */
}
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 344b221..4f81dd4 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -6099,6 +6099,8 @@
[ALC269_FIXUP_PCM_44K] = {
.type = ALC_FIXUP_FUNC,
.v.func = alc269_fixup_pcm_44k,
+ .chained = true,
+ .chain_id = ALC269_FIXUP_QUANTA_MUTE
},
[ALC269_FIXUP_STEREO_DMIC] = {
.type = ALC_FIXUP_FUNC,
@@ -6206,9 +6208,11 @@
SND_PCI_QUIRK(0x17aa, 0x21b8, "Thinkpad Edge 14", ALC269_FIXUP_SKU_IGNORE),
SND_PCI_QUIRK(0x17aa, 0x21ca, "Thinkpad L412", ALC269_FIXUP_SKU_IGNORE),
SND_PCI_QUIRK(0x17aa, 0x21e9, "Thinkpad Edge 15", ALC269_FIXUP_SKU_IGNORE),
+ SND_PCI_QUIRK(0x17aa, 0x21f6, "Thinkpad T530", ALC269_FIXUP_LENOVO_DOCK),
+ SND_PCI_QUIRK(0x17aa, 0x21fa, "Thinkpad X230", ALC269_FIXUP_LENOVO_DOCK),
+ SND_PCI_QUIRK(0x17aa, 0x21fb, "Thinkpad T430s", ALC269_FIXUP_LENOVO_DOCK),
SND_PCI_QUIRK(0x17aa, 0x2203, "Thinkpad X230 Tablet", ALC269_FIXUP_LENOVO_DOCK),
- SND_PCI_QUIRK(0x17aa, 0x3bf8, "Quanta FL1", ALC269_FIXUP_QUANTA_MUTE),
- SND_PCI_QUIRK(0x17aa, 0x3bf8, "Lenovo Ideapd", ALC269_FIXUP_PCM_44K),
+ SND_PCI_QUIRK(0x17aa, 0x3bf8, "Quanta FL1", ALC269_FIXUP_PCM_44K),
SND_PCI_QUIRK(0x17aa, 0x9e54, "LENOVO NB", ALC269_FIXUP_LENOVO_EAPD),
#if 0
diff --git a/sound/soc/codecs/ab8500-codec.c b/sound/soc/codecs/ab8500-codec.c
index 3c79592..23b4018 100644
--- a/sound/soc/codecs/ab8500-codec.c
+++ b/sound/soc/codecs/ab8500-codec.c
@@ -2406,6 +2406,10 @@
/* Setup AB8500 according to board-settings */
pdata = (struct ab8500_platform_data *)dev_get_platdata(dev->parent);
+
+ /* Inform SoC Core that we have our own I/O arrangements. */
+ codec->control_data = (void *)true;
+
status = ab8500_audio_setup_mics(codec, &pdata->codec->amics);
if (status < 0) {
pr_err("%s: Failed to setup mics (%d)!\n", __func__, status);
diff --git a/sound/soc/codecs/ad1980.c b/sound/soc/codecs/ad1980.c
index 8c39ddd..11b1b71 100644
--- a/sound/soc/codecs/ad1980.c
+++ b/sound/soc/codecs/ad1980.c
@@ -186,6 +186,7 @@
printk(KERN_INFO "AD1980 SoC Audio Codec\n");
+ codec->control_data = codec; /* we don't use regmap! */
ret = snd_soc_new_ac97_codec(codec, &soc_ac97_ops, 0);
if (ret < 0) {
printk(KERN_ERR "ad1980: failed to register AC97 codec\n");
diff --git a/sound/soc/codecs/mc13783.c b/sound/soc/codecs/mc13783.c
index 6276e35..8f726c0 100644
--- a/sound/soc/codecs/mc13783.c
+++ b/sound/soc/codecs/mc13783.c
@@ -581,6 +581,8 @@
{
struct mc13783_priv *priv = snd_soc_codec_get_drvdata(codec);
+ codec->control_data = priv->mc13xxx;
+
mc13xxx_lock(priv->mc13xxx);
/* these are the reset values */
diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c
index 8af6a52..df2f99d 100644
--- a/sound/soc/codecs/sgtl5000.c
+++ b/sound/soc/codecs/sgtl5000.c
@@ -239,6 +239,7 @@
{"Headphone Mux", "DAC", "DAC"}, /* dac --> hp_mux */
{"LO", NULL, "DAC"}, /* dac --> line_out */
+ {"LINE_IN", NULL, "VAG_POWER"},
{"Headphone Mux", "LINE_IN", "LINE_IN"},/* line_in --> hp_mux */
{"HP", NULL, "Headphone Mux"}, /* hp_mux --> hp */
@@ -1357,8 +1358,6 @@
if (ret)
goto err;
- snd_soc_dapm_new_widgets(&codec->dapm);
-
return 0;
err:
diff --git a/sound/soc/codecs/stac9766.c b/sound/soc/codecs/stac9766.c
index 982e437..33c0f3d 100644
--- a/sound/soc/codecs/stac9766.c
+++ b/sound/soc/codecs/stac9766.c
@@ -340,6 +340,7 @@
printk(KERN_INFO "STAC9766 SoC Audio Codec %s\n", STAC9766_VERSION);
+ codec->control_data = codec; /* we don't use regmap! */
ret = snd_soc_new_ac97_codec(codec, &soc_ac97_ops, 0);
if (ret < 0)
goto codec_err;
diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c
index eaf6586..aa9ce9d 100644
--- a/sound/soc/codecs/wm8962.c
+++ b/sound/soc/codecs/wm8962.c
@@ -2501,6 +2501,9 @@
/* VMID 2*250k */
snd_soc_update_bits(codec, WM8962_PWR_MGMT_1,
WM8962_VMID_SEL_MASK, 0x100);
+
+ if (codec->dapm.bias_level == SND_SOC_BIAS_OFF)
+ msleep(100);
break;
case SND_SOC_BIAS_OFF:
diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c
index bb62f4b..04ef031 100644
--- a/sound/soc/codecs/wm8994.c
+++ b/sound/soc/codecs/wm8994.c
@@ -2649,7 +2649,7 @@
return -EINVAL;
}
- bclk_rate = params_rate(params) * 2;
+ bclk_rate = params_rate(params) * 4;
switch (params_format(params)) {
case SNDRV_PCM_FORMAT_S16_LE:
bclk_rate *= 16;
@@ -3253,10 +3253,13 @@
int ret;
int report;
+ pm_runtime_get_sync(dev);
+
ret = regmap_read(regmap, WM8994_INTERRUPT_RAW_STATUS_2, ®);
if (ret < 0) {
dev_err(dev, "Failed to read microphone status: %d\n",
ret);
+ pm_runtime_put(dev);
return;
}
@@ -3299,6 +3302,8 @@
snd_soc_jack_report(priv->micdet[1].jack, report,
SND_JACK_HEADSET | SND_JACK_BTN_0);
+
+ pm_runtime_put(dev);
}
static irqreturn_t wm8994_mic_irq(int irq, void *data)
@@ -3421,12 +3426,15 @@
int reg;
bool present;
+ pm_runtime_get_sync(codec->dev);
+
mutex_lock(&wm8994->accdet_lock);
reg = snd_soc_read(codec, WM1811_JACKDET_CTRL);
if (reg < 0) {
dev_err(codec->dev, "Failed to read jack status: %d\n", reg);
mutex_unlock(&wm8994->accdet_lock);
+ pm_runtime_put(codec->dev);
return IRQ_NONE;
}
@@ -3491,6 +3499,7 @@
SND_JACK_MECHANICAL | SND_JACK_HEADSET |
wm8994->btn_mask);
+ pm_runtime_put(codec->dev);
return IRQ_HANDLED;
}
@@ -3602,6 +3611,8 @@
if (!(snd_soc_read(codec, WM8958_MIC_DETECT_1) & WM8958_MICD_ENA))
return IRQ_HANDLED;
+ pm_runtime_get_sync(codec->dev);
+
/* We may occasionally read a detection without an impedence
* range being provided - if that happens loop again.
*/
@@ -3612,6 +3623,7 @@
dev_err(codec->dev,
"Failed to read mic detect status: %d\n",
reg);
+ pm_runtime_put(codec->dev);
return IRQ_NONE;
}
@@ -3639,6 +3651,7 @@
dev_warn(codec->dev, "Accessory detection with no callback\n");
out:
+ pm_runtime_put(codec->dev);
return IRQ_HANDLED;
}
diff --git a/sound/soc/codecs/wm9712.c b/sound/soc/codecs/wm9712.c
index 099e6ec..f16fb36 100644
--- a/sound/soc/codecs/wm9712.c
+++ b/sound/soc/codecs/wm9712.c
@@ -619,6 +619,7 @@
{
int ret = 0;
+ codec->control_data = codec; /* we don't use regmap! */
ret = snd_soc_new_ac97_codec(codec, &soc_ac97_ops, 0);
if (ret < 0) {
printk(KERN_ERR "wm9712: failed to register AC97 codec\n");
diff --git a/sound/soc/codecs/wm9713.c b/sound/soc/codecs/wm9713.c
index 3eb19fb..d0b8a32 100644
--- a/sound/soc/codecs/wm9713.c
+++ b/sound/soc/codecs/wm9713.c
@@ -1196,6 +1196,7 @@
if (wm9713 == NULL)
return -ENOMEM;
snd_soc_codec_set_drvdata(codec, wm9713);
+ codec->control_data = wm9713; /* we don't use regmap! */
ret = snd_soc_new_ac97_codec(codec, &soc_ac97_ops, 0);
if (ret < 0)
diff --git a/sound/soc/mxs/mxs-saif.c b/sound/soc/mxs/mxs-saif.c
index aba71bf..b303071 100644
--- a/sound/soc/mxs/mxs-saif.c
+++ b/sound/soc/mxs/mxs-saif.c
@@ -394,9 +394,14 @@
struct snd_soc_dai *cpu_dai)
{
struct mxs_saif *saif = snd_soc_dai_get_drvdata(cpu_dai);
+ struct mxs_saif *master_saif;
u32 scr, stat;
int ret;
+ master_saif = mxs_saif_get_master(saif);
+ if (!master_saif)
+ return -EINVAL;
+
/* mclk should already be set */
if (!saif->mclk && saif->mclk_in_use) {
dev_err(cpu_dai->dev, "set mclk first\n");
@@ -420,6 +425,25 @@
return ret;
}
+ /* prepare clk in hw_param, enable in trigger */
+ clk_prepare(saif->clk);
+ if (saif != master_saif) {
+ /*
+ * Set an initial clock rate for the saif internal logic to work
+ * properly. This is important when working in EXTMASTER mode
+ * that uses the other saif's BITCLK&LRCLK but it still needs a
+ * basic clock which should be fast enough for the internal
+ * logic.
+ */
+ clk_enable(saif->clk);
+ ret = clk_set_rate(saif->clk, 24000000);
+ clk_disable(saif->clk);
+ if (ret)
+ return ret;
+
+ clk_prepare(master_saif->clk);
+ }
+
scr = __raw_readl(saif->base + SAIF_CTRL);
scr &= ~BM_SAIF_CTRL_WORD_LENGTH;
diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c
index 1046083..acdd3ef 100644
--- a/sound/soc/omap/omap-mcbsp.c
+++ b/sound/soc/omap/omap-mcbsp.c
@@ -820,3 +820,4 @@
MODULE_AUTHOR("Jarkko Nikula <jarkko.nikula@bitmer.com>");
MODULE_DESCRIPTION("OMAP I2S SoC Interface");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:omap-mcbsp");
diff --git a/sound/soc/omap/omap-pcm.c b/sound/soc/omap/omap-pcm.c
index 5a649da..f0feb06 100644
--- a/sound/soc/omap/omap-pcm.c
+++ b/sound/soc/omap/omap-pcm.c
@@ -441,3 +441,4 @@
MODULE_AUTHOR("Jarkko Nikula <jarkko.nikula@bitmer.com>");
MODULE_DESCRIPTION("OMAP PCM DMA module");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:omap-pcm-audio");
diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
index f219b2f..f81c597 100644
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -1096,7 +1096,7 @@
}
/* If the driver didn't set I/O up try regmap */
- if (!codec->control_data)
+ if (!codec->write && dev_get_regmap(codec->dev, NULL))
snd_soc_codec_set_cache_io(codec, 0, 0, SND_SOC_REGMAP);
if (driver->controls)
diff --git a/sound/soc/tegra/tegra_alc5632.c b/sound/soc/tegra/tegra_alc5632.c
index d684df2..e463529 100644
--- a/sound/soc/tegra/tegra_alc5632.c
+++ b/sound/soc/tegra/tegra_alc5632.c
@@ -177,7 +177,7 @@
}
alc5632->gpio_hp_det = of_get_named_gpio(np, "nvidia,hp-det-gpios", 0);
- if (alc5632->gpio_hp_det == -ENODEV)
+ if (alc5632->gpio_hp_det == -EPROBE_DEFER)
return -EPROBE_DEFER;
ret = snd_soc_of_parse_card_name(card, "nvidia,model");
diff --git a/sound/soc/tegra/tegra_wm8903.c b/sound/soc/tegra/tegra_wm8903.c
index 0c5bb33..d4f14e4 100644
--- a/sound/soc/tegra/tegra_wm8903.c
+++ b/sound/soc/tegra/tegra_wm8903.c
@@ -284,27 +284,27 @@
} else if (np) {
pdata->gpio_spkr_en = of_get_named_gpio(np,
"nvidia,spkr-en-gpios", 0);
- if (pdata->gpio_spkr_en == -ENODEV)
+ if (pdata->gpio_spkr_en == -EPROBE_DEFER)
return -EPROBE_DEFER;
pdata->gpio_hp_mute = of_get_named_gpio(np,
"nvidia,hp-mute-gpios", 0);
- if (pdata->gpio_hp_mute == -ENODEV)
+ if (pdata->gpio_hp_mute == -EPROBE_DEFER)
return -EPROBE_DEFER;
pdata->gpio_hp_det = of_get_named_gpio(np,
"nvidia,hp-det-gpios", 0);
- if (pdata->gpio_hp_det == -ENODEV)
+ if (pdata->gpio_hp_det == -EPROBE_DEFER)
return -EPROBE_DEFER;
pdata->gpio_int_mic_en = of_get_named_gpio(np,
"nvidia,int-mic-en-gpios", 0);
- if (pdata->gpio_int_mic_en == -ENODEV)
+ if (pdata->gpio_int_mic_en == -EPROBE_DEFER)
return -EPROBE_DEFER;
pdata->gpio_ext_mic_en = of_get_named_gpio(np,
"nvidia,ext-mic-en-gpios", 0);
- if (pdata->gpio_ext_mic_en == -ENODEV)
+ if (pdata->gpio_ext_mic_en == -EPROBE_DEFER)
return -EPROBE_DEFER;
}
diff --git a/sound/soc/ux500/ux500_msp_dai.c b/sound/soc/ux500/ux500_msp_dai.c
index 62ac028..057e28e 100644
--- a/sound/soc/ux500/ux500_msp_dai.c
+++ b/sound/soc/ux500/ux500_msp_dai.c
@@ -21,7 +21,7 @@
#include <linux/mfd/dbx500-prcmu.h>
#include <mach/hardware.h>
-#include <mach/board-mop500-msp.h>
+#include <mach/msp.h>
#include <sound/soc.h>
#include <sound/soc-dai.h>
diff --git a/sound/soc/ux500/ux500_msp_i2s.c b/sound/soc/ux500/ux500_msp_i2s.c
index ee14d2d..5c472f3 100644
--- a/sound/soc/ux500/ux500_msp_i2s.c
+++ b/sound/soc/ux500/ux500_msp_i2s.c
@@ -19,7 +19,7 @@
#include <linux/slab.h>
#include <mach/hardware.h>
-#include <mach/board-mop500-msp.h>
+#include <mach/msp.h>
#include <sound/soc.h>
diff --git a/sound/soc/ux500/ux500_msp_i2s.h b/sound/soc/ux500/ux500_msp_i2s.h
index 7f71b4a..2d9136d 100644
--- a/sound/soc/ux500/ux500_msp_i2s.h
+++ b/sound/soc/ux500/ux500_msp_i2s.h
@@ -17,7 +17,7 @@
#include <linux/platform_device.h>
-#include <mach/board-mop500-msp.h>
+#include <mach/msp.h>
#define MSP_INPUT_FREQ_APB 48000000
diff --git a/tools/perf/Makefile b/tools/perf/Makefile
index 77f124f..35655c3 100644
--- a/tools/perf/Makefile
+++ b/tools/perf/Makefile
@@ -319,6 +319,8 @@
LIB_H += util/cgroup.h
LIB_H += $(TRACE_EVENT_DIR)event-parse.h
LIB_H += util/target.h
+LIB_H += util/rblist.h
+LIB_H += util/intlist.h
LIB_OBJS += $(OUTPUT)util/abspath.o
LIB_OBJS += $(OUTPUT)util/alias.o
@@ -383,6 +385,8 @@
LIB_OBJS += $(OUTPUT)util/cpumap.o
LIB_OBJS += $(OUTPUT)util/cgroup.o
LIB_OBJS += $(OUTPUT)util/target.o
+LIB_OBJS += $(OUTPUT)util/rblist.o
+LIB_OBJS += $(OUTPUT)util/intlist.o
BUILTIN_OBJS += $(OUTPUT)builtin-annotate.o
@@ -983,7 +987,8 @@
$(RM) *.spec *.pyc *.pyo */*.pyc */*.pyo $(OUTPUT)common-cmds.h TAGS tags cscope*
$(MAKE) -C Documentation/ clean
$(RM) $(OUTPUT)PERF-VERSION-FILE $(OUTPUT)PERF-CFLAGS
- $(RM) $(OUTPUT)util/*-{bison,flex}*
+ $(RM) $(OUTPUT)util/*-bison*
+ $(RM) $(OUTPUT)util/*-flex*
$(python-clean)
.PHONY: all install clean strip $(LIBTRACEEVENT)
diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c
index f5a6452..4db6e1b 100644
--- a/tools/perf/builtin-record.c
+++ b/tools/perf/builtin-record.c
@@ -313,7 +313,7 @@
}
}
- perf_session__update_sample_type(session);
+ perf_session__set_id_hdr_size(session);
}
static int process_buildids(struct perf_record *rec)
@@ -844,8 +844,6 @@
struct perf_record *rec = &record;
char errbuf[BUFSIZ];
- perf_header__set_cmdline(argc, argv);
-
evsel_list = perf_evlist__new(NULL, NULL);
if (evsel_list == NULL)
return -ENOMEM;
diff --git a/tools/perf/builtin-report.c b/tools/perf/builtin-report.c
index 69b1c11..7c88a24 100644
--- a/tools/perf/builtin-report.c
+++ b/tools/perf/builtin-report.c
@@ -249,8 +249,9 @@
static int perf_report__setup_sample_type(struct perf_report *rep)
{
struct perf_session *self = rep->session;
+ u64 sample_type = perf_evlist__sample_type(self->evlist);
- if (!self->fd_pipe && !(self->sample_type & PERF_SAMPLE_CALLCHAIN)) {
+ if (!self->fd_pipe && !(sample_type & PERF_SAMPLE_CALLCHAIN)) {
if (sort__has_parent) {
ui__error("Selected --sort parent, but no "
"callchain data. Did you call "
@@ -274,7 +275,7 @@
if (sort__branch_mode == 1) {
if (!self->fd_pipe &&
- !(self->sample_type & PERF_SAMPLE_BRANCH_STACK)) {
+ !(sample_type & PERF_SAMPLE_BRANCH_STACK)) {
ui__error("Selected -b but no branch data. "
"Did you call perf record without -b?\n");
return -1;
diff --git a/tools/perf/builtin-test.c b/tools/perf/builtin-test.c
index d909eb7..1d592f5 100644
--- a/tools/perf/builtin-test.c
+++ b/tools/perf/builtin-test.c
@@ -478,7 +478,6 @@
unsigned int nr_events[nsyscalls],
expected_nr_events[nsyscalls], i, j;
struct perf_evsel *evsels[nsyscalls], *evsel;
- int sample_size = __perf_evsel__sample_size(attr.sample_type);
for (i = 0; i < nsyscalls; ++i) {
char name[64];
@@ -563,8 +562,7 @@
goto out_munmap;
}
- err = perf_event__parse_sample(event, attr.sample_type, sample_size,
- false, &sample, false);
+ err = perf_evlist__parse_sample(evlist, event, &sample, false);
if (err) {
pr_err("Can't parse sample, err = %d\n", err);
goto out_munmap;
@@ -661,12 +659,12 @@
const char *cmd = "sleep";
const char *argv[] = { cmd, "1", NULL, };
char *bname;
- u64 sample_type, prev_time = 0;
+ u64 prev_time = 0;
bool found_cmd_mmap = false,
found_libc_mmap = false,
found_vdso_mmap = false,
found_ld_mmap = false;
- int err = -1, errs = 0, i, wakeups = 0, sample_size;
+ int err = -1, errs = 0, i, wakeups = 0;
u32 cpu;
int total_events = 0, nr_events[PERF_RECORD_MAX] = { 0, };
@@ -757,13 +755,6 @@
}
/*
- * We'll need these two to parse the PERF_SAMPLE_* fields in each
- * event.
- */
- sample_type = perf_evlist__sample_type(evlist);
- sample_size = __perf_evsel__sample_size(sample_type);
-
- /*
* Now that all is properly set up, enable the events, they will
* count just on workload.pid, which will start...
*/
@@ -788,9 +779,7 @@
if (type < PERF_RECORD_MAX)
nr_events[type]++;
- err = perf_event__parse_sample(event, sample_type,
- sample_size, true,
- &sample, false);
+ err = perf_evlist__parse_sample(evlist, event, &sample, false);
if (err < 0) {
if (verbose)
perf_event__fprintf(event, stderr);
diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c
index 35e86c6..68cd61e 100644
--- a/tools/perf/builtin-top.c
+++ b/tools/perf/builtin-top.c
@@ -38,6 +38,7 @@
#include "util/cpumap.h"
#include "util/xyarray.h"
#include "util/sort.h"
+#include "util/intlist.h"
#include "util/debug.h"
@@ -706,8 +707,16 @@
int err;
if (!machine && perf_guest) {
- pr_err("Can't find guest [%d]'s kernel information\n",
- event->ip.pid);
+ static struct intlist *seen;
+
+ if (!seen)
+ seen = intlist__new();
+
+ if (!intlist__has_entry(seen, event->ip.pid)) {
+ pr_err("Can't find guest [%d]'s kernel information\n",
+ event->ip.pid);
+ intlist__add(seen, event->ip.pid);
+ }
return;
}
@@ -811,7 +820,7 @@
int ret;
while ((event = perf_evlist__mmap_read(top->evlist, idx)) != NULL) {
- ret = perf_session__parse_sample(session, event, &sample);
+ ret = perf_evlist__parse_sample(top->evlist, event, &sample, false);
if (ret) {
pr_err("Can't parse sample, err = %d\n", ret);
continue;
@@ -943,8 +952,10 @@
* based cpu-clock-tick sw counter, which
* is always available even if no PMU support:
*/
- if (attr->type == PERF_TYPE_HARDWARE &&
- attr->config == PERF_COUNT_HW_CPU_CYCLES) {
+ if ((err == ENOENT || err == ENXIO) &&
+ (attr->type == PERF_TYPE_HARDWARE) &&
+ (attr->config == PERF_COUNT_HW_CPU_CYCLES)) {
+
if (verbose)
ui__warning("Cycles event not supported,\n"
"trying to fall back to cpu-clock-ticks\n");
@@ -1032,7 +1043,7 @@
&top->session->host_machine);
perf_top__start_counters(top);
top->session->evlist = top->evlist;
- perf_session__update_sample_type(top->session);
+ perf_session__set_id_hdr_size(top->session);
/* Wait for a minimal set of events before starting the snapshot */
poll(top->evlist->pollfd, top->evlist->nr_fds, 100);
diff --git a/tools/perf/util/event.h b/tools/perf/util/event.h
index 1b19728..d84870b 100644
--- a/tools/perf/util/event.h
+++ b/tools/perf/util/event.h
@@ -197,9 +197,6 @@
const char *perf_event__name(unsigned int id);
-int perf_event__parse_sample(const union perf_event *event, u64 type,
- int sample_size, bool sample_id_all,
- struct perf_sample *sample, bool swapped);
int perf_event__synthesize_sample(union perf_event *event, u64 type,
const struct perf_sample *sample,
bool swapped);
diff --git a/tools/perf/util/evlist.c b/tools/perf/util/evlist.c
index 3edfd34..9b38681 100644
--- a/tools/perf/util/evlist.c
+++ b/tools/perf/util/evlist.c
@@ -881,3 +881,10 @@
return 0;
}
+
+int perf_evlist__parse_sample(struct perf_evlist *evlist, union perf_event *event,
+ struct perf_sample *sample, bool swapped)
+{
+ struct perf_evsel *e = list_entry(evlist->entries.next, struct perf_evsel, node);
+ return perf_evsel__parse_sample(e, event, sample, swapped);
+}
diff --git a/tools/perf/util/evlist.h b/tools/perf/util/evlist.h
index 40d4d3c..528c1ac 100644
--- a/tools/perf/util/evlist.h
+++ b/tools/perf/util/evlist.h
@@ -122,6 +122,9 @@
bool perf_evlist__sample_id_all(const const struct perf_evlist *evlist);
u16 perf_evlist__id_hdr_size(const struct perf_evlist *evlist);
+int perf_evlist__parse_sample(struct perf_evlist *evlist, union perf_event *event,
+ struct perf_sample *sample, bool swapped);
+
bool perf_evlist__valid_sample_type(const struct perf_evlist *evlist);
bool perf_evlist__valid_sample_id_all(const struct perf_evlist *evlist);
diff --git a/tools/perf/util/evsel.c b/tools/perf/util/evsel.c
index e817713..2eaae14 100644
--- a/tools/perf/util/evsel.c
+++ b/tools/perf/util/evsel.c
@@ -20,7 +20,7 @@
#define FD(e, x, y) (*(int *)xyarray__entry(e->fd, x, y))
#define GROUP_FD(group_fd, cpu) (*(int *)xyarray__entry(group_fd, cpu, 0))
-int __perf_evsel__sample_size(u64 sample_type)
+static int __perf_evsel__sample_size(u64 sample_type)
{
u64 mask = sample_type & PERF_SAMPLE_MASK;
int size = 0;
@@ -53,6 +53,7 @@
evsel->attr = *attr;
INIT_LIST_HEAD(&evsel->node);
hists__init(&evsel->hists);
+ evsel->sample_size = __perf_evsel__sample_size(attr->sample_type);
}
struct perf_evsel *perf_evsel__new(struct perf_event_attr *attr, int idx)
@@ -728,10 +729,10 @@
return false;
}
-int perf_event__parse_sample(const union perf_event *event, u64 type,
- int sample_size, bool sample_id_all,
+int perf_evsel__parse_sample(struct perf_evsel *evsel, union perf_event *event,
struct perf_sample *data, bool swapped)
{
+ u64 type = evsel->attr.sample_type;
const u64 *array;
/*
@@ -746,14 +747,14 @@
data->period = 1;
if (event->header.type != PERF_RECORD_SAMPLE) {
- if (!sample_id_all)
+ if (!evsel->attr.sample_id_all)
return 0;
return perf_event__parse_id_sample(event, type, data, swapped);
}
array = event->sample.array;
- if (sample_size + sizeof(event->header) > event->header.size)
+ if (evsel->sample_size + sizeof(event->header) > event->header.size)
return -EFAULT;
if (type & PERF_SAMPLE_IP) {
@@ -895,7 +896,7 @@
u.val32[1] = sample->tid;
if (swapped) {
/*
- * Inverse of what is done in perf_event__parse_sample
+ * Inverse of what is done in perf_evsel__parse_sample
*/
u.val32[0] = bswap_32(u.val32[0]);
u.val32[1] = bswap_32(u.val32[1]);
@@ -930,7 +931,7 @@
u.val32[0] = sample->cpu;
if (swapped) {
/*
- * Inverse of what is done in perf_event__parse_sample
+ * Inverse of what is done in perf_evsel__parse_sample
*/
u.val32[0] = bswap_32(u.val32[0]);
u.val64 = bswap_64(u.val64);
diff --git a/tools/perf/util/evsel.h b/tools/perf/util/evsel.h
index 67cc503..b559929 100644
--- a/tools/perf/util/evsel.h
+++ b/tools/perf/util/evsel.h
@@ -65,6 +65,7 @@
void *func;
void *data;
} handler;
+ unsigned int sample_size;
bool supported;
};
@@ -177,13 +178,8 @@
return __perf_evsel__read(evsel, ncpus, nthreads, true);
}
-int __perf_evsel__sample_size(u64 sample_type);
-
-static inline int perf_evsel__sample_size(struct perf_evsel *evsel)
-{
- return __perf_evsel__sample_size(evsel->attr.sample_type);
-}
-
void hists__init(struct hists *hists);
+int perf_evsel__parse_sample(struct perf_evsel *evsel, union perf_event *event,
+ struct perf_sample *sample, bool swapped);
#endif /* __PERF_EVSEL_H */
diff --git a/tools/perf/util/header.c b/tools/perf/util/header.c
index 3a6d204..74ea3c2 100644
--- a/tools/perf/util/header.c
+++ b/tools/perf/util/header.c
@@ -174,6 +174,15 @@
{
int i;
+ /*
+ * If header_argv has already been set, do not override it.
+ * This allows a command to set the cmdline, parse args and
+ * then call another builtin function that implements a
+ * command -- e.g, cmd_kvm calling cmd_record.
+ */
+ if (header_argv)
+ return 0;
+
header_argc = (u32)argc;
/* do not include NULL termination */
diff --git a/tools/perf/util/intlist.c b/tools/perf/util/intlist.c
new file mode 100644
index 0000000..fd530dc
--- /dev/null
+++ b/tools/perf/util/intlist.c
@@ -0,0 +1,101 @@
+/*
+ * Based on intlist.c by:
+ * (c) 2009 Arnaldo Carvalho de Melo <acme@redhat.com>
+ *
+ * Licensed under the GPLv2.
+ */
+
+#include <errno.h>
+#include <stdlib.h>
+#include <linux/compiler.h>
+
+#include "intlist.h"
+
+static struct rb_node *intlist__node_new(struct rblist *rblist __used,
+ const void *entry)
+{
+ int i = (int)((long)entry);
+ struct rb_node *rc = NULL;
+ struct int_node *node = malloc(sizeof(*node));
+
+ if (node != NULL) {
+ node->i = i;
+ rc = &node->rb_node;
+ }
+
+ return rc;
+}
+
+static void int_node__delete(struct int_node *ilist)
+{
+ free(ilist);
+}
+
+static void intlist__node_delete(struct rblist *rblist __used,
+ struct rb_node *rb_node)
+{
+ struct int_node *node = container_of(rb_node, struct int_node, rb_node);
+
+ int_node__delete(node);
+}
+
+static int intlist__node_cmp(struct rb_node *rb_node, const void *entry)
+{
+ int i = (int)((long)entry);
+ struct int_node *node = container_of(rb_node, struct int_node, rb_node);
+
+ return node->i - i;
+}
+
+int intlist__add(struct intlist *ilist, int i)
+{
+ return rblist__add_node(&ilist->rblist, (void *)((long)i));
+}
+
+void intlist__remove(struct intlist *ilist __used, struct int_node *node)
+{
+ int_node__delete(node);
+}
+
+struct int_node *intlist__find(struct intlist *ilist, int i)
+{
+ struct int_node *node = NULL;
+ struct rb_node *rb_node = rblist__find(&ilist->rblist, (void *)((long)i));
+
+ if (rb_node)
+ node = container_of(rb_node, struct int_node, rb_node);
+
+ return node;
+}
+
+struct intlist *intlist__new(void)
+{
+ struct intlist *ilist = malloc(sizeof(*ilist));
+
+ if (ilist != NULL) {
+ rblist__init(&ilist->rblist);
+ ilist->rblist.node_cmp = intlist__node_cmp;
+ ilist->rblist.node_new = intlist__node_new;
+ ilist->rblist.node_delete = intlist__node_delete;
+ }
+
+ return ilist;
+}
+
+void intlist__delete(struct intlist *ilist)
+{
+ if (ilist != NULL)
+ rblist__delete(&ilist->rblist);
+}
+
+struct int_node *intlist__entry(const struct intlist *ilist, unsigned int idx)
+{
+ struct int_node *node = NULL;
+ struct rb_node *rb_node;
+
+ rb_node = rblist__entry(&ilist->rblist, idx);
+ if (rb_node)
+ node = container_of(rb_node, struct int_node, rb_node);
+
+ return node;
+}
diff --git a/tools/perf/util/intlist.h b/tools/perf/util/intlist.h
new file mode 100644
index 0000000..6d63ab9
--- /dev/null
+++ b/tools/perf/util/intlist.h
@@ -0,0 +1,75 @@
+#ifndef __PERF_INTLIST_H
+#define __PERF_INTLIST_H
+
+#include <linux/rbtree.h>
+#include <stdbool.h>
+
+#include "rblist.h"
+
+struct int_node {
+ struct rb_node rb_node;
+ int i;
+};
+
+struct intlist {
+ struct rblist rblist;
+};
+
+struct intlist *intlist__new(void);
+void intlist__delete(struct intlist *ilist);
+
+void intlist__remove(struct intlist *ilist, struct int_node *in);
+int intlist__add(struct intlist *ilist, int i);
+
+struct int_node *intlist__entry(const struct intlist *ilist, unsigned int idx);
+struct int_node *intlist__find(struct intlist *ilist, int i);
+
+static inline bool intlist__has_entry(struct intlist *ilist, int i)
+{
+ return intlist__find(ilist, i) != NULL;
+}
+
+static inline bool intlist__empty(const struct intlist *ilist)
+{
+ return rblist__empty(&ilist->rblist);
+}
+
+static inline unsigned int intlist__nr_entries(const struct intlist *ilist)
+{
+ return rblist__nr_entries(&ilist->rblist);
+}
+
+/* For intlist iteration */
+static inline struct int_node *intlist__first(struct intlist *ilist)
+{
+ struct rb_node *rn = rb_first(&ilist->rblist.entries);
+ return rn ? rb_entry(rn, struct int_node, rb_node) : NULL;
+}
+static inline struct int_node *intlist__next(struct int_node *in)
+{
+ struct rb_node *rn;
+ if (!in)
+ return NULL;
+ rn = rb_next(&in->rb_node);
+ return rn ? rb_entry(rn, struct int_node, rb_node) : NULL;
+}
+
+/**
+ * intlist_for_each - iterate over a intlist
+ * @pos: the &struct int_node to use as a loop cursor.
+ * @ilist: the &struct intlist for loop.
+ */
+#define intlist__for_each(pos, ilist) \
+ for (pos = intlist__first(ilist); pos; pos = intlist__next(pos))
+
+/**
+ * intlist_for_each_safe - iterate over a intlist safe against removal of
+ * int_node
+ * @pos: the &struct int_node to use as a loop cursor.
+ * @n: another &struct int_node to use as temporary storage.
+ * @ilist: the &struct intlist for loop.
+ */
+#define intlist__for_each_safe(pos, n, ilist) \
+ for (pos = intlist__first(ilist), n = intlist__next(pos); pos;\
+ pos = n, n = intlist__next(n))
+#endif /* __PERF_INTLIST_H */
diff --git a/tools/perf/util/parse-events-test.c b/tools/perf/util/parse-events-test.c
index 1b997d2..127d648 100644
--- a/tools/perf/util/parse-events-test.c
+++ b/tools/perf/util/parse-events-test.c
@@ -13,6 +13,9 @@
} \
} while (0)
+#define PERF_TP_SAMPLE_TYPE (PERF_SAMPLE_RAW | PERF_SAMPLE_TIME | \
+ PERF_SAMPLE_CPU | PERF_SAMPLE_PERIOD)
+
static int test__checkevent_tracepoint(struct perf_evlist *evlist)
{
struct perf_evsel *evsel = list_entry(evlist->entries.next,
@@ -21,8 +24,7 @@
TEST_ASSERT_VAL("wrong number of entries", 1 == evlist->nr_entries);
TEST_ASSERT_VAL("wrong type", PERF_TYPE_TRACEPOINT == evsel->attr.type);
TEST_ASSERT_VAL("wrong sample_type",
- (PERF_SAMPLE_RAW | PERF_SAMPLE_TIME | PERF_SAMPLE_CPU) ==
- evsel->attr.sample_type);
+ PERF_TP_SAMPLE_TYPE == evsel->attr.sample_type);
TEST_ASSERT_VAL("wrong sample_period", 1 == evsel->attr.sample_period);
return 0;
}
@@ -37,8 +39,7 @@
TEST_ASSERT_VAL("wrong type",
PERF_TYPE_TRACEPOINT == evsel->attr.type);
TEST_ASSERT_VAL("wrong sample_type",
- (PERF_SAMPLE_RAW | PERF_SAMPLE_TIME | PERF_SAMPLE_CPU)
- == evsel->attr.sample_type);
+ PERF_TP_SAMPLE_TYPE == evsel->attr.sample_type);
TEST_ASSERT_VAL("wrong sample_period",
1 == evsel->attr.sample_period);
}
@@ -428,8 +429,7 @@
evsel = list_entry(evsel->node.next, struct perf_evsel, node);
TEST_ASSERT_VAL("wrong type", PERF_TYPE_TRACEPOINT == evsel->attr.type);
TEST_ASSERT_VAL("wrong sample_type",
- (PERF_SAMPLE_RAW | PERF_SAMPLE_TIME | PERF_SAMPLE_CPU) ==
- evsel->attr.sample_type);
+ PERF_TP_SAMPLE_TYPE == evsel->attr.sample_type);
TEST_ASSERT_VAL("wrong sample_period", 1 == evsel->attr.sample_period);
TEST_ASSERT_VAL("wrong exclude_user", evsel->attr.exclude_user);
TEST_ASSERT_VAL("wrong exclude_kernel", !evsel->attr.exclude_kernel);
diff --git a/tools/perf/util/parse-options.c b/tools/perf/util/parse-options.c
index 99d02aa..594f8fa 100644
--- a/tools/perf/util/parse-options.c
+++ b/tools/perf/util/parse-options.c
@@ -1,6 +1,7 @@
#include "util.h"
#include "parse-options.h"
#include "cache.h"
+#include "header.h"
#define OPT_SHORT 1
#define OPT_UNSET 2
@@ -413,6 +414,8 @@
{
struct parse_opt_ctx_t ctx;
+ perf_header__set_cmdline(argc, argv);
+
parse_options_start(&ctx, argc, argv, flags);
switch (parse_options_step(&ctx, options, usagestr)) {
case PARSE_OPT_HELP:
diff --git a/tools/perf/util/python.c b/tools/perf/util/python.c
index e03b58a..0688bfb 100644
--- a/tools/perf/util/python.c
+++ b/tools/perf/util/python.c
@@ -797,17 +797,13 @@
event = perf_evlist__mmap_read(evlist, cpu);
if (event != NULL) {
- struct perf_evsel *first;
PyObject *pyevent = pyrf_event__new(event);
struct pyrf_event *pevent = (struct pyrf_event *)pyevent;
if (pyevent == NULL)
return PyErr_NoMemory();
- first = list_entry(evlist->entries.next, struct perf_evsel, node);
- err = perf_event__parse_sample(event, first->attr.sample_type,
- perf_evsel__sample_size(first),
- sample_id_all, &pevent->sample, false);
+ err = perf_evlist__parse_sample(evlist, event, &pevent->sample, false);
if (err)
return PyErr_Format(PyExc_OSError,
"perf: can't parse sample, err=%d", err);
diff --git a/tools/perf/util/rblist.c b/tools/perf/util/rblist.c
new file mode 100644
index 0000000..0171fb6
--- /dev/null
+++ b/tools/perf/util/rblist.c
@@ -0,0 +1,107 @@
+/*
+ * Based on strlist.c by:
+ * (c) 2009 Arnaldo Carvalho de Melo <acme@redhat.com>
+ *
+ * Licensed under the GPLv2.
+ */
+
+#include <errno.h>
+#include <stdio.h>
+#include <stdlib.h>
+
+#include "rblist.h"
+
+int rblist__add_node(struct rblist *rblist, const void *new_entry)
+{
+ struct rb_node **p = &rblist->entries.rb_node;
+ struct rb_node *parent = NULL, *new_node;
+
+ while (*p != NULL) {
+ int rc;
+
+ parent = *p;
+
+ rc = rblist->node_cmp(parent, new_entry);
+ if (rc > 0)
+ p = &(*p)->rb_left;
+ else if (rc < 0)
+ p = &(*p)->rb_right;
+ else
+ return -EEXIST;
+ }
+
+ new_node = rblist->node_new(rblist, new_entry);
+ if (new_node == NULL)
+ return -ENOMEM;
+
+ rb_link_node(new_node, parent, p);
+ rb_insert_color(new_node, &rblist->entries);
+ ++rblist->nr_entries;
+
+ return 0;
+}
+
+void rblist__remove_node(struct rblist *rblist, struct rb_node *rb_node)
+{
+ rb_erase(rb_node, &rblist->entries);
+ rblist->node_delete(rblist, rb_node);
+}
+
+struct rb_node *rblist__find(struct rblist *rblist, const void *entry)
+{
+ struct rb_node **p = &rblist->entries.rb_node;
+ struct rb_node *parent = NULL;
+
+ while (*p != NULL) {
+ int rc;
+
+ parent = *p;
+
+ rc = rblist->node_cmp(parent, entry);
+ if (rc > 0)
+ p = &(*p)->rb_left;
+ else if (rc < 0)
+ p = &(*p)->rb_right;
+ else
+ return parent;
+ }
+
+ return NULL;
+}
+
+void rblist__init(struct rblist *rblist)
+{
+ if (rblist != NULL) {
+ rblist->entries = RB_ROOT;
+ rblist->nr_entries = 0;
+ }
+
+ return;
+}
+
+void rblist__delete(struct rblist *rblist)
+{
+ if (rblist != NULL) {
+ struct rb_node *pos, *next = rb_first(&rblist->entries);
+
+ while (next) {
+ pos = next;
+ next = rb_next(pos);
+ rb_erase(pos, &rblist->entries);
+ rblist->node_delete(rblist, pos);
+ }
+ free(rblist);
+ }
+}
+
+struct rb_node *rblist__entry(const struct rblist *rblist, unsigned int idx)
+{
+ struct rb_node *node;
+
+ for (node = rb_first(&rblist->entries); node; node = rb_next(node)) {
+ if (!idx--)
+ return node;
+ }
+
+ return NULL;
+}
diff --git a/tools/perf/util/rblist.h b/tools/perf/util/rblist.h
new file mode 100644
index 0000000..6d0cae5
--- /dev/null
+++ b/tools/perf/util/rblist.h
@@ -0,0 +1,47 @@
+#ifndef __PERF_RBLIST_H
+#define __PERF_RBLIST_H
+
+#include <linux/rbtree.h>
+#include <stdbool.h>
+
+/*
+ * create node structs of the form:
+ * struct my_node {
+ * struct rb_node rb_node;
+ * ... my data ...
+ * };
+ *
+ * create list structs of the form:
+ * struct mylist {
+ * struct rblist rblist;
+ * ... my data ...
+ * };
+ */
+
+struct rblist {
+ struct rb_root entries;
+ unsigned int nr_entries;
+
+ int (*node_cmp)(struct rb_node *rbn, const void *entry);
+ struct rb_node *(*node_new)(struct rblist *rlist, const void *new_entry);
+ void (*node_delete)(struct rblist *rblist, struct rb_node *rb_node);
+};
+
+void rblist__init(struct rblist *rblist);
+void rblist__delete(struct rblist *rblist);
+int rblist__add_node(struct rblist *rblist, const void *new_entry);
+void rblist__remove_node(struct rblist *rblist, struct rb_node *rb_node);
+struct rb_node *rblist__find(struct rblist *rblist, const void *entry);
+struct rb_node *rblist__entry(const struct rblist *rblist, unsigned int idx);
+
+static inline bool rblist__empty(const struct rblist *rblist)
+{
+ return rblist->nr_entries == 0;
+}
+
+static inline unsigned int rblist__nr_entries(const struct rblist *rblist)
+{
+ return rblist->nr_entries;
+}
+
+#endif /* __PERF_RBLIST_H */
diff --git a/tools/perf/util/session.c b/tools/perf/util/session.c
index 8e4f075..2437fb0 100644
--- a/tools/perf/util/session.c
+++ b/tools/perf/util/session.c
@@ -80,14 +80,12 @@
return -1;
}
-void perf_session__update_sample_type(struct perf_session *self)
+void perf_session__set_id_hdr_size(struct perf_session *session)
{
- self->sample_type = perf_evlist__sample_type(self->evlist);
- self->sample_size = __perf_evsel__sample_size(self->sample_type);
- self->sample_id_all = perf_evlist__sample_id_all(self->evlist);
- self->id_hdr_size = perf_evlist__id_hdr_size(self->evlist);
- self->host_machine.id_hdr_size = self->id_hdr_size;
- machines__set_id_hdr_size(&self->machines, self->id_hdr_size);
+ u16 id_hdr_size = perf_evlist__id_hdr_size(session->evlist);
+
+ session->host_machine.id_hdr_size = id_hdr_size;
+ machines__set_id_hdr_size(&session->machines, id_hdr_size);
}
int perf_session__create_kernel_maps(struct perf_session *self)
@@ -147,7 +145,7 @@
if (mode == O_RDONLY) {
if (perf_session__open(self, force) < 0)
goto out_delete;
- perf_session__update_sample_type(self);
+ perf_session__set_id_hdr_size(self);
} else if (mode == O_WRONLY) {
/*
* In O_RDONLY mode this will be performed when reading the
@@ -158,7 +156,7 @@
}
if (tool && tool->ordering_requires_timestamps &&
- tool->ordered_samples && !self->sample_id_all) {
+ tool->ordered_samples && !perf_evlist__sample_id_all(self->evlist)) {
dump_printf("WARNING: No sample_id_all support, falling back to unordered processing\n");
tool->ordered_samples = false;
}
@@ -673,7 +671,8 @@
if (iter->timestamp > limit)
break;
- ret = perf_session__parse_sample(s, iter->event, &sample);
+ ret = perf_evlist__parse_sample(s->evlist, iter->event, &sample,
+ s->header.needs_swap);
if (ret)
pr_err("Can't parse sample, err = %d\n", ret);
else
@@ -865,16 +864,18 @@
union perf_event *event,
struct perf_sample *sample)
{
+ u64 sample_type = perf_evlist__sample_type(session->evlist);
+
if (event->header.type != PERF_RECORD_SAMPLE &&
- !session->sample_id_all) {
+ !perf_evlist__sample_id_all(session->evlist)) {
fputs("-1 -1 ", stdout);
return;
}
- if ((session->sample_type & PERF_SAMPLE_CPU))
+ if ((sample_type & PERF_SAMPLE_CPU))
printf("%u ", sample->cpu);
- if (session->sample_type & PERF_SAMPLE_TIME)
+ if (sample_type & PERF_SAMPLE_TIME)
printf("%" PRIu64 " ", sample->time);
}
@@ -899,6 +900,8 @@
static void dump_sample(struct perf_session *session, union perf_event *event,
struct perf_sample *sample)
{
+ u64 sample_type;
+
if (!dump_trace)
return;
@@ -906,10 +909,12 @@
event->header.misc, sample->pid, sample->tid, sample->ip,
sample->period, sample->addr);
- if (session->sample_type & PERF_SAMPLE_CALLCHAIN)
+ sample_type = perf_evlist__sample_type(session->evlist);
+
+ if (sample_type & PERF_SAMPLE_CALLCHAIN)
callchain__printf(sample);
- if (session->sample_type & PERF_SAMPLE_BRANCH_STACK)
+ if (sample_type & PERF_SAMPLE_BRANCH_STACK)
branch_stack__printf(sample);
}
@@ -1006,7 +1011,7 @@
union perf_event *event, struct perf_sample *sample)
{
if (event->header.type != PERF_RECORD_SAMPLE ||
- !(session->sample_type & PERF_SAMPLE_CALLCHAIN))
+ !(perf_evlist__sample_type(session->evlist) & PERF_SAMPLE_CALLCHAIN))
return 0;
if (!ip_callchain__valid(sample->callchain, event)) {
@@ -1030,7 +1035,7 @@
case PERF_RECORD_HEADER_ATTR:
err = tool->attr(event, &session->evlist);
if (err == 0)
- perf_session__update_sample_type(session);
+ perf_session__set_id_hdr_size(session);
return err;
case PERF_RECORD_HEADER_EVENT_TYPE:
return tool->event_type(tool, event);
@@ -1065,7 +1070,7 @@
int ret;
if (session->header.needs_swap)
- event_swap(event, session->sample_id_all);
+ event_swap(event, perf_evlist__sample_id_all(session->evlist));
if (event->header.type >= PERF_RECORD_HEADER_MAX)
return -EINVAL;
@@ -1078,7 +1083,8 @@
/*
* For all kernel events we get the sample data
*/
- ret = perf_session__parse_sample(session, event, &sample);
+ ret = perf_evlist__parse_sample(session->evlist, event, &sample,
+ session->header.needs_swap);
if (ret)
return ret;
@@ -1389,9 +1395,9 @@
return err;
}
-bool perf_session__has_traces(struct perf_session *self, const char *msg)
+bool perf_session__has_traces(struct perf_session *session, const char *msg)
{
- if (!(self->sample_type & PERF_SAMPLE_RAW)) {
+ if (!(perf_evlist__sample_type(session->evlist) & PERF_SAMPLE_RAW)) {
pr_err("No trace sample to read. Did you call 'perf %s'?\n", msg);
return false;
}
diff --git a/tools/perf/util/session.h b/tools/perf/util/session.h
index 7c435bd..1f7ec87 100644
--- a/tools/perf/util/session.h
+++ b/tools/perf/util/session.h
@@ -41,13 +41,9 @@
* perf.data file.
*/
struct hists hists;
- u64 sample_type;
- int sample_size;
int fd;
bool fd_pipe;
bool repipe;
- bool sample_id_all;
- u16 id_hdr_size;
int cwdlen;
char *cwd;
struct ordered_samples ordered_samples;
@@ -86,7 +82,7 @@
int perf_session__create_kernel_maps(struct perf_session *self);
-void perf_session__update_sample_type(struct perf_session *self);
+void perf_session__set_id_hdr_size(struct perf_session *session);
void perf_session__remove_thread(struct perf_session *self, struct thread *th);
static inline
@@ -130,24 +126,6 @@
size_t perf_session__fprintf_nr_events(struct perf_session *session, FILE *fp);
-static inline int perf_session__parse_sample(struct perf_session *session,
- const union perf_event *event,
- struct perf_sample *sample)
-{
- return perf_event__parse_sample(event, session->sample_type,
- session->sample_size,
- session->sample_id_all, sample,
- session->header.needs_swap);
-}
-
-static inline int perf_session__synthesize_sample(struct perf_session *session,
- union perf_event *event,
- const struct perf_sample *sample)
-{
- return perf_event__synthesize_sample(event, session->sample_type,
- sample, session->header.needs_swap);
-}
-
struct perf_evsel *perf_session__find_first_evtype(struct perf_session *session,
unsigned int type);
diff --git a/tools/perf/util/strlist.c b/tools/perf/util/strlist.c
index 6783a20..95856ff 100644
--- a/tools/perf/util/strlist.c
+++ b/tools/perf/util/strlist.c
@@ -10,23 +10,28 @@
#include <stdlib.h>
#include <string.h>
-static struct str_node *str_node__new(const char *s, bool dupstr)
+static
+struct rb_node *strlist__node_new(struct rblist *rblist, const void *entry)
{
- struct str_node *self = malloc(sizeof(*self));
+ const char *s = entry;
+ struct rb_node *rc = NULL;
+ struct strlist *strlist = container_of(rblist, struct strlist, rblist);
+ struct str_node *snode = malloc(sizeof(*snode));
- if (self != NULL) {
- if (dupstr) {
+ if (snode != NULL) {
+ if (strlist->dupstr) {
s = strdup(s);
if (s == NULL)
goto out_delete;
}
- self->s = s;
+ snode->s = s;
+ rc = &snode->rb_node;
}
- return self;
+ return rc;
out_delete:
- free(self);
+ free(snode);
return NULL;
}
@@ -37,36 +42,26 @@
free(self);
}
+static
+void strlist__node_delete(struct rblist *rblist, struct rb_node *rb_node)
+{
+ struct strlist *slist = container_of(rblist, struct strlist, rblist);
+ struct str_node *snode = container_of(rb_node, struct str_node, rb_node);
+
+ str_node__delete(snode, slist->dupstr);
+}
+
+static int strlist__node_cmp(struct rb_node *rb_node, const void *entry)
+{
+ const char *str = entry;
+ struct str_node *snode = container_of(rb_node, struct str_node, rb_node);
+
+ return strcmp(snode->s, str);
+}
+
int strlist__add(struct strlist *self, const char *new_entry)
{
- struct rb_node **p = &self->entries.rb_node;
- struct rb_node *parent = NULL;
- struct str_node *sn;
-
- while (*p != NULL) {
- int rc;
-
- parent = *p;
- sn = rb_entry(parent, struct str_node, rb_node);
- rc = strcmp(sn->s, new_entry);
-
- if (rc > 0)
- p = &(*p)->rb_left;
- else if (rc < 0)
- p = &(*p)->rb_right;
- else
- return -EEXIST;
- }
-
- sn = str_node__new(new_entry, self->dupstr);
- if (sn == NULL)
- return -ENOMEM;
-
- rb_link_node(&sn->rb_node, parent, p);
- rb_insert_color(&sn->rb_node, &self->entries);
- ++self->nr_entries;
-
- return 0;
+ return rblist__add_node(&self->rblist, new_entry);
}
int strlist__load(struct strlist *self, const char *filename)
@@ -96,34 +91,20 @@
return err;
}
-void strlist__remove(struct strlist *self, struct str_node *sn)
+void strlist__remove(struct strlist *slist, struct str_node *snode)
{
- rb_erase(&sn->rb_node, &self->entries);
- str_node__delete(sn, self->dupstr);
+ str_node__delete(snode, slist->dupstr);
}
-struct str_node *strlist__find(struct strlist *self, const char *entry)
+struct str_node *strlist__find(struct strlist *slist, const char *entry)
{
- struct rb_node **p = &self->entries.rb_node;
- struct rb_node *parent = NULL;
+ struct str_node *snode = NULL;
+ struct rb_node *rb_node = rblist__find(&slist->rblist, entry);
- while (*p != NULL) {
- struct str_node *sn;
- int rc;
+ if (rb_node)
+ snode = container_of(rb_node, struct str_node, rb_node);
- parent = *p;
- sn = rb_entry(parent, struct str_node, rb_node);
- rc = strcmp(sn->s, entry);
-
- if (rc > 0)
- p = &(*p)->rb_left;
- else if (rc < 0)
- p = &(*p)->rb_right;
- else
- return sn;
- }
-
- return NULL;
+ return snode;
}
static int strlist__parse_list_entry(struct strlist *self, const char *s)
@@ -156,9 +137,12 @@
struct strlist *self = malloc(sizeof(*self));
if (self != NULL) {
- self->entries = RB_ROOT;
+ rblist__init(&self->rblist);
+ self->rblist.node_cmp = strlist__node_cmp;
+ self->rblist.node_new = strlist__node_new;
+ self->rblist.node_delete = strlist__node_delete;
+
self->dupstr = dupstr;
- self->nr_entries = 0;
if (slist && strlist__parse_list(self, slist) != 0)
goto out_error;
}
@@ -171,30 +155,18 @@
void strlist__delete(struct strlist *self)
{
- if (self != NULL) {
- struct str_node *pos;
- struct rb_node *next = rb_first(&self->entries);
-
- while (next) {
- pos = rb_entry(next, struct str_node, rb_node);
- next = rb_next(&pos->rb_node);
- strlist__remove(self, pos);
- }
- self->entries = RB_ROOT;
- free(self);
- }
+ if (self != NULL)
+ rblist__delete(&self->rblist);
}
-struct str_node *strlist__entry(const struct strlist *self, unsigned int idx)
+struct str_node *strlist__entry(const struct strlist *slist, unsigned int idx)
{
- struct rb_node *nd;
+ struct str_node *snode = NULL;
+ struct rb_node *rb_node;
- for (nd = rb_first(&self->entries); nd; nd = rb_next(nd)) {
- struct str_node *pos = rb_entry(nd, struct str_node, rb_node);
+ rb_node = rblist__entry(&slist->rblist, idx);
+ if (rb_node)
+ snode = container_of(rb_node, struct str_node, rb_node);
- if (!idx--)
- return pos;
- }
-
- return NULL;
+ return snode;
}
diff --git a/tools/perf/util/strlist.h b/tools/perf/util/strlist.h
index 3ba8390..dd9f922 100644
--- a/tools/perf/util/strlist.h
+++ b/tools/perf/util/strlist.h
@@ -4,14 +4,15 @@
#include <linux/rbtree.h>
#include <stdbool.h>
+#include "rblist.h"
+
struct str_node {
struct rb_node rb_node;
const char *s;
};
struct strlist {
- struct rb_root entries;
- unsigned int nr_entries;
+ struct rblist rblist;
bool dupstr;
};
@@ -32,18 +33,18 @@
static inline bool strlist__empty(const struct strlist *self)
{
- return self->nr_entries == 0;
+ return rblist__empty(&self->rblist);
}
static inline unsigned int strlist__nr_entries(const struct strlist *self)
{
- return self->nr_entries;
+ return rblist__nr_entries(&self->rblist);
}
/* For strlist iteration */
static inline struct str_node *strlist__first(struct strlist *self)
{
- struct rb_node *rn = rb_first(&self->entries);
+ struct rb_node *rn = rb_first(&self->rblist.entries);
return rn ? rb_entry(rn, struct str_node, rb_node) : NULL;
}
static inline struct str_node *strlist__next(struct str_node *sn)
diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c
index fdad4eee..8b63b67 100644
--- a/tools/perf/util/symbol.c
+++ b/tools/perf/util/symbol.c
@@ -64,7 +64,7 @@
DSO_BINARY_TYPE__NOT_FOUND,
};
-#define DSO_BINARY_TYPE__SYMTAB_CNT sizeof(binary_type_symtab)
+#define DSO_BINARY_TYPE__SYMTAB_CNT ARRAY_SIZE(binary_type_symtab)
static enum dso_binary_type binary_type_data[] = {
DSO_BINARY_TYPE__BUILD_ID_CACHE,
@@ -72,7 +72,7 @@
DSO_BINARY_TYPE__NOT_FOUND,
};
-#define DSO_BINARY_TYPE__DATA_CNT sizeof(binary_type_data)
+#define DSO_BINARY_TYPE__DATA_CNT ARRAY_SIZE(binary_type_data)
int dso__name_len(const struct dso *dso)
{
@@ -2875,6 +2875,7 @@
int i, items = 0;
char path[PATH_MAX];
pid_t pid;
+ char *endp;
if (symbol_conf.default_guest_vmlinux_name ||
symbol_conf.default_guest_modules ||
@@ -2891,7 +2892,14 @@
/* Filter out . and .. */
continue;
}
- pid = atoi(namelist[i]->d_name);
+ pid = (pid_t)strtol(namelist[i]->d_name, &endp, 10);
+ if ((*endp != '\0') ||
+ (endp == namelist[i]->d_name) ||
+ (errno == ERANGE)) {
+ pr_debug("invalid directory (%s). Skipping.\n",
+ namelist[i]->d_name);
+ continue;
+ }
sprintf(path, "%s/%s/proc/kallsyms",
symbol_conf.guestmount,
namelist[i]->d_name);
diff --git a/tools/perf/util/target.c b/tools/perf/util/target.c
index 3f59c49..051eaa6 100644
--- a/tools/perf/util/target.c
+++ b/tools/perf/util/target.c
@@ -110,7 +110,7 @@
int idx;
const char *msg;
- BUG_ON(buflen > 0);
+ BUG_ON(buflen == 0);
if (errnum >= 0) {
const char *err = strerror_r(errnum, buf, buflen);
