| .TH CPUPOWER\-SET "1" "22/02/2011" "" "cpupower Manual" | |
| .SH NAME | |
| cpupower\-set \- Set processor power related kernel or hardware configurations | |
| .SH SYNOPSIS | |
| .ft B | |
| .B cpupower set [ \-b VAL ] | |
| .SH DESCRIPTION | |
| \fBcpupower set \fP sets kernel configurations or directly accesses hardware | |
| registers affecting processor power saving policies. | |
| Some options are platform wide, some affect single cores. By default values | |
| are applied on all cores. How to modify single core configurations is | |
| described in the cpupower(1) manpage in the \-\-cpu option section. Whether an | |
| option affects the whole system or can be applied to individual cores is | |
| described in the Options sections. | |
| Use \fBcpupower info \fP to read out current settings and whether they are | |
| supported on the system at all. | |
| .SH Options | |
| .PP | |
| \-\-perf-bias, \-b | |
| .RS 4 | |
| Sets a register on supported Intel processore which allows software to convey | |
| its policy for the relative importance of performance versus energy savings to | |
| the processor. | |
| The range of valid numbers is 0-15, where 0 is maximum | |
| performance and 15 is maximum energy efficiency. | |
| The processor uses this information in model-specific ways | |
| when it must select trade-offs between performance and | |
| energy efficiency. | |
| This policy hint does not supersede Processor Performance states | |
| (P-states) or CPU Idle power states (C-states), but allows | |
| software to have influence where it would otherwise be unable | |
| to express a preference. | |
| For example, this setting may tell the hardware how | |
| aggressively or conservatively to control frequency | |
| in the "turbo range" above the explicitly OS-controlled | |
| P-state frequency range. It may also tell the hardware | |
| how aggressively it should enter the OS requested C-states. | |
| This option can be applied to individual cores only via the \-\-cpu option, | |
| cpupower(1). | |
| Setting the performance bias value on one CPU can modify the setting on | |
| related CPUs as well (for example all CPUs on one socket), because of | |
| hardware restrictions. | |
| Use \fBcpupower -c all info -b\fP to verify. | |
| This options needs the msr kernel driver (CONFIG_X86_MSR) loaded. | |
| .RE | |
| .SH "SEE ALSO" | |
| cpupower-info(1), cpupower-monitor(1), powertop(1) | |
| .PP | |
| .SH AUTHORS | |
| .nf | |
| \-\-perf\-bias parts written by Len Brown <len.brown@intel.com> | |
| Thomas Renninger <trenn@suse.de> |