V4L/DVB (9168): Add support for MSI TV@nywhere Plus remote
The IR controller has a couple quirks. It won't respond until some other
device on the bus is probed. To work around that, probe 0x50 first.
Then, since it won't respond to a zero-byte read, probe with a one-byte
read.
Signed-off-by: Brian Rogers <brian_rogers@comcast.net>
[mchehab.redhat.com: Fix merge conflicts and remove an unused var]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/common/ir-keymaps.c b/drivers/media/common/ir-keymaps.c
index b7ed88c..4952aeb 100644
--- a/drivers/media/common/ir-keymaps.c
+++ b/drivers/media/common/ir-keymaps.c
@@ -517,7 +517,8 @@
/* ---------------------------------------------------------------------- */
-/* MSI TV@nywhere remote */
+/* MSI TV@nywhere MASTER remote */
+
IR_KEYTAB_TYPE ir_codes_msi_tvanywhere[IR_KEYTAB_SIZE] = {
/* Keys 0 to 9 */
[ 0x00 ] = KEY_0,
@@ -551,6 +552,95 @@
/* ---------------------------------------------------------------------- */
+/*
+ Keycodes for remote on the MSI TV@nywhere Plus. The controller IC on the card
+ is marked "KS003". The controller is I2C at address 0x30, but does not seem
+ to respond to probes until a read is performed from a valid device.
+ I don't know why...
+
+ Note: This remote may be of similar or identical design to the
+ Pixelview remote (?). The raw codes and duplicate button codes
+ appear to be the same.
+
+ Henry Wong <henry@stuffedcow.net>
+ Some changes to formatting and keycodes by Mark Schultz <n9xmj@yahoo.com>
+
+*/
+
+IR_KEYTAB_TYPE ir_codes_msi_tvanywhere_plus[IR_KEYTAB_SIZE] = {
+
+/* ---- Remote Button Layout ----
+
+ POWER SOURCE SCAN MUTE
+ TV/FM 1 2 3
+ |> 4 5 6
+ <| 7 8 9
+ ^^UP 0 + RECALL
+ vvDN RECORD STOP PLAY
+
+ MINIMIZE ZOOM
+
+ CH+
+ VOL- VOL+
+ CH-
+
+ SNAPSHOT MTS
+
+ << FUNC >> RESET
+*/
+
+ [0x01] = KEY_KP1, /* 1 */
+ [0x0b] = KEY_KP2, /* 2 */
+ [0x1b] = KEY_KP3, /* 3 */
+ [0x05] = KEY_KP4, /* 4 */
+ [0x09] = KEY_KP5, /* 5 */
+ [0x15] = KEY_KP6, /* 6 */
+ [0x06] = KEY_KP7, /* 7 */
+ [0x0a] = KEY_KP8, /* 8 */
+ [0x12] = KEY_KP9, /* 9 */
+ [0x02] = KEY_KP0, /* 0 */
+ [0x10] = KEY_KPPLUS, /* + */
+ [0x13] = KEY_AGAIN, /* Recall */
+
+ [0x1e] = KEY_POWER, /* Power */
+ [0x07] = KEY_TUNER, /* Source */
+ [0x1c] = KEY_SEARCH, /* Scan */
+ [0x18] = KEY_MUTE, /* Mute */
+
+ [0x03] = KEY_RADIO, /* TV/FM */
+ /* The next four keys are duplicates that appear to send the
+ same IR code as Ch+, Ch-, >>, and << . The raw code assigned
+ to them is the actual code + 0x20 - they will never be
+ detected as such unless some way is discovered to distinguish
+ these buttons from those that have the same code. */
+ [0x3f] = KEY_RIGHT, /* |> and Ch+ */
+ [0x37] = KEY_LEFT, /* <| and Ch- */
+ [0x2c] = KEY_UP, /* ^^Up and >> */
+ [0x24] = KEY_DOWN, /* vvDn and << */
+
+ [0x00] = KEY_RECORD, /* Record */
+ [0x08] = KEY_STOP, /* Stop */
+ [0x11] = KEY_PLAY, /* Play */
+
+ [0x0f] = KEY_CLOSE, /* Minimize */
+ [0x19] = KEY_ZOOM, /* Zoom */
+ [0x1a] = KEY_SHUFFLE, /* Snapshot */
+ [0x0d] = KEY_LANGUAGE, /* MTS */
+
+ [0x14] = KEY_VOLUMEDOWN, /* Vol- */
+ [0x16] = KEY_VOLUMEUP, /* Vol+ */
+ [0x17] = KEY_CHANNELDOWN, /* Ch- */
+ [0x1f] = KEY_CHANNELUP, /* Ch+ */
+
+ [0x04] = KEY_REWIND, /* << */
+ [0x0e] = KEY_MENU, /* Function */
+ [0x0c] = KEY_FASTFORWARD, /* >> */
+ [0x1d] = KEY_RESTART, /* Reset */
+};
+EXPORT_SYMBOL_GPL(ir_codes_msi_tvanywhere_plus);
+
+/* ---------------------------------------------------------------------- */
+
/* Cinergy 1400 DVB-T */
IR_KEYTAB_TYPE ir_codes_cinergy_1400[IR_KEYTAB_SIZE] = {
[ 0x01 ] = KEY_POWER,
