usb: udc: Fix gadget driver's speed check in various UDC drivers
Several UDC drivers had a gadget driver's speed sanity check of the
form of:
driver->speed != USB_SPEED_HIGH
or:
driver->speed != USB_SPEED_HIGH && driver->speed != USB_SPEED_FULL
As more and more gadget drivers support USB SuperSpeed, driver->speed
may be set to USB_SPEED_SUPER and UDC driver should handle such gadget
correctly. The above checks however fail to recognise USB_SPEED_SUPER
as a valid speed.
This commit changes the two checks to:
driver->speed < USB_SPEED_HIGH
or:
driver->speed < USB_SPEED_FULL
respectively.
Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Reported-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c
index 4730016..45f422a 100644
--- a/drivers/usb/gadget/amd5536udc.c
+++ b/drivers/usb/gadget/amd5536udc.c
@@ -1959,7 +1959,7 @@
u32 tmp;
if (!driver || !bind || !driver->setup
- || driver->speed != USB_SPEED_HIGH)
+ || driver->speed < USB_SPEED_HIGH)
return -EINVAL;
if (!dev)
return -ENODEV;
diff --git a/drivers/usb/gadget/fsl_qe_udc.c b/drivers/usb/gadget/fsl_qe_udc.c
index 2a03e4d..e00cf92 100644
--- a/drivers/usb/gadget/fsl_qe_udc.c
+++ b/drivers/usb/gadget/fsl_qe_udc.c
@@ -2336,8 +2336,7 @@
if (!udc_controller)
return -ENODEV;
- if (!driver || (driver->speed != USB_SPEED_FULL
- && driver->speed != USB_SPEED_HIGH)
+ if (!driver || driver->speed < USB_SPEED_FULL
|| !bind || !driver->disconnect || !driver->setup)
return -EINVAL;
diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c
index b3b3d83..1482b12 100644
--- a/drivers/usb/gadget/fsl_udc_core.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@@ -1938,8 +1938,7 @@
if (!udc_controller)
return -ENODEV;
- if (!driver || (driver->speed != USB_SPEED_FULL
- && driver->speed != USB_SPEED_HIGH)
+ if (!driver || driver->speed < USB_SPEED_FULL
|| !bind || !driver->disconnect || !driver->setup)
return -EINVAL;
diff --git a/drivers/usb/gadget/m66592-udc.c b/drivers/usb/gadget/m66592-udc.c
index 91d0af2..9aa1cbb 100644
--- a/drivers/usb/gadget/m66592-udc.c
+++ b/drivers/usb/gadget/m66592-udc.c
@@ -1472,7 +1472,7 @@
int retval;
if (!driver
- || driver->speed != USB_SPEED_HIGH
+ || driver->speed < USB_SPEED_HIGH
|| !bind
|| !driver->setup)
return -EINVAL;
diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c
index 7f1bc9a..da2b9d0 100644
--- a/drivers/usb/gadget/net2280.c
+++ b/drivers/usb/gadget/net2280.c
@@ -1881,7 +1881,7 @@
* (dev->usb->xcvrdiag & FORCE_FULL_SPEED_MODE)
* "must not be used in normal operation"
*/
- if (!driver || driver->speed != USB_SPEED_HIGH
+ if (!driver || driver->speed < USB_SPEED_HIGH
|| !driver->setup)
return -EINVAL;
diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c
index 24f84b2..fc719a3 100644
--- a/drivers/usb/gadget/r8a66597-udc.c
+++ b/drivers/usb/gadget/r8a66597-udc.c
@@ -1746,7 +1746,7 @@
struct r8a66597 *r8a66597 = gadget_to_r8a66597(gadget);
if (!driver
- || driver->speed != USB_SPEED_HIGH
+ || driver->speed < USB_SPEED_HIGH
|| !driver->setup)
return -EINVAL;
if (!r8a66597)
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index a552453..b314482 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -2586,10 +2586,8 @@
return -EINVAL;
}
- if (driver->speed != USB_SPEED_HIGH &&
- driver->speed != USB_SPEED_FULL) {
+ if (driver->speed < USB_SPEED_FULL)
dev_err(hsotg->dev, "%s: bad speed\n", __func__);
- }
if (!bind || !driver->setup) {
dev_err(hsotg->dev, "%s: missing entry points\n", __func__);
diff --git a/drivers/usb/gadget/s3c-hsudc.c b/drivers/usb/gadget/s3c-hsudc.c
index 8d54f89..20a553b 100644
--- a/drivers/usb/gadget/s3c-hsudc.c
+++ b/drivers/usb/gadget/s3c-hsudc.c
@@ -1142,8 +1142,7 @@
int ret;
if (!driver
- || (driver->speed != USB_SPEED_FULL &&
- driver->speed != USB_SPEED_HIGH)
+ || driver->speed < USB_SPEED_FULL
|| !bind
|| !driver->unbind || !driver->disconnect || !driver->setup)
return -EINVAL;
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index d51043a..922148f 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -1903,7 +1903,7 @@
unsigned long flags;
int retval = -EINVAL;
- if (driver->speed != USB_SPEED_HIGH)
+ if (driver->speed < USB_SPEED_HIGH)
goto err0;
pm_runtime_get_sync(musb->controller);
