arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi - arm/linux - Git at Google

 /*
  *  BSD LICENSE
  *
  *  Copyright(c) 2015-2017 Broadcom.  All rights reserved.
  *
  *  Redistribution and use in source and binary forms, with or without
  *  modification, are permitted provided that the following conditions
  *  are met:
  *
  *    * Redistributions of source code must retain the above copyright
  *      notice, this list of conditions and the following disclaimer.
  *    * Redistributions in binary form must reproduce the above copyright
  *      notice, this list of conditions and the following disclaimer in
  *      the documentation and/or other materials provided with the
  *      distribution.
  *    * Neither the name of Broadcom nor the names of its
  *      contributors may be used to endorse or promote products derived
  *      from this software without specific prior written permission.
  *
  *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
  *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
  *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
  *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */

 #include <dt-bindings/interrupt-controller/arm-gic.h>

 / {
 	compatible = "brcm,stingray";
 	interrupt-parent = <&gic>;
 	#address-cells = <2>;
 	#size-cells = <2>;

 	cpus {
 		#address-cells = <2>;
 		#size-cells = <0>;

 		cpu@000 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a72", "arm,armv8";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
 			next-level-cache = <&CLUSTER0_L2>;
 		};

 		cpu@001 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a72", "arm,armv8";
 			reg = <0x0 0x1>;
 			enable-method = "psci";
 			next-level-cache = <&CLUSTER0_L2>;
 		};

 		cpu@100 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a72", "arm,armv8";
 			reg = <0x0 0x100>;
 			enable-method = "psci";
 			next-level-cache = <&CLUSTER1_L2>;
 		};

 		cpu@101 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a72", "arm,armv8";
 			reg = <0x0 0x101>;
 			enable-method = "psci";
 			next-level-cache = <&CLUSTER1_L2>;
 		};

 		cpu@200 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a72", "arm,armv8";
 			reg = <0x0 0x200>;
 			enable-method = "psci";
 			next-level-cache = <&CLUSTER2_L2>;
 		};

 		cpu@201 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a72", "arm,armv8";
 			reg = <0x0 0x201>;
 			enable-method = "psci";
 			next-level-cache = <&CLUSTER2_L2>;
 		};

 		cpu@300 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a72", "arm,armv8";
 			reg = <0x0 0x300>;
 			enable-method = "psci";
 			next-level-cache = <&CLUSTER3_L2>;
 		};

 		cpu@301 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a72", "arm,armv8";
 			reg = <0x0 0x301>;
 			enable-method = "psci";
 			next-level-cache = <&CLUSTER3_L2>;
 		};

 		CLUSTER0_L2: l2-cache@000 {
 			compatible = "cache";
 		};

 		CLUSTER1_L2: l2-cache@100 {
 			compatible = "cache";
 		};

 		CLUSTER2_L2: l2-cache@200 {
 			compatible = "cache";
 		};

 		CLUSTER3_L2: l2-cache@300 {
 			compatible = "cache";
 		};
 	};

 	memory: memory@80000000 {
 		device_type = "memory";
 		reg = <0x00000000 0x80000000 0 0x40000000>;
 	};

 	psci {
 		compatible = "arm,psci-0.2";
 		method = "smc";
 	};

 	pmu {
 		compatible = "arm,armv8-pmuv3";
 		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
 	};

 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
 			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
 			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
 			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
 	};

 	scr {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x0 0x0 0x61000000 0x05000000>;

 		ccn: ccn@00000000 {
 			compatible = "arm,ccn-502";
 			reg = <0x00000000 0x900000>;
 			interrupts = <GIC_SPI 799 IRQ_TYPE_LEVEL_HIGH>;
 		};

 		gic: interrupt-controller@02c00000 {
 			compatible = "arm,gic-v3";
 			#interrupt-cells = <3>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
 			interrupt-controller;
 			reg = <0x02c00000 0x010000>, /* GICD */
 			      <0x02e00000 0x600000>; /* GICR */
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;

 			gic_its: gic-its@63c20000 {
 				compatible = "arm,gic-v3-its";
 				msi-controller;
 				#msi-cells = <1>;
 				reg = <0x02c20000 0x10000>;
 			};
 		};

 		smmu: mmu@03000000 {
 			compatible = "arm,mmu-500";
 			reg = <0x03000000 0x80000>;
 			#global-interrupts = <1>;
 			interrupts = <GIC_SPI 704 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 711 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 712 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 713 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 714 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 715 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 716 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 717 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 718 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 719 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 720 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 721 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 722 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 723 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 724 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 725 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 726 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 727 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 728 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 729 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 730 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 731 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 732 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 733 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 734 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 735 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 736 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 737 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 738 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 739 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 740 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 741 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 742 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 743 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 744 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 745 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 746 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 747 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 748 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 749 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 750 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 751 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 752 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 753 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 754 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 755 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 756 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 757 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 758 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 759 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 760 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 761 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 762 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 763 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 764 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 765 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 766 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 767 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 768 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 769 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 770 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 771 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 772 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 773 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>;
 			#iommu-cells = <2>;
 		};
 	};

 	crmu: crmu {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x0 0x0 0x66400000 0x100000>;

 		#include "stingray-clock.dtsi"

 		gpio_crmu: gpio@00024800 {
 			compatible = "brcm,iproc-gpio";
 			reg = <0x00024800 0x4c>;
 			ngpios = <6>;
 			#gpio-cells = <2>;
 			gpio-controller;
 		};
 	};

 	#include "stingray-fs4.dtsi"
 	#include "stingray-sata.dtsi"

 	hsls {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x0 0x0 0x68900000 0x17700000>;

 		#include "stingray-pinctrl.dtsi"

 		mdio_mux_iproc: mdio-mux@0002023c {
 			compatible = "brcm,mdio-mux-iproc";
 			reg = <0x0002023c 0x14>;
 			#address-cells = <1>;
 			#size-cells = <0>;

 			mdio@0 { /* PCIe serdes */
 				reg = <0x0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 			};

 			mdio@2 { /* SATA */
 				reg = <0x2>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 			};

 			mdio@3 { /* USB */
 				reg = <0x3>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 			};

 			mdio@10 { /* RGMII */
 				reg = <0x10>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 			};
 		};

 		pwm: pwm@00010000 {
 			compatible = "brcm,iproc-pwm";
 			reg = <0x00010000 0x1000>;
 			clocks = <&crmu_ref25m>;
 			#pwm-cells = <3>;
 			status = "disabled";
 		};

 		timer0: timer@00030000 {
 			compatible = "arm,sp804", "arm,primecell";
 			reg = <0x00030000 0x1000>;
 			interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&hsls_25m_div2_clk>,
 				 <&hsls_25m_div2_clk>,
 				 <&hsls_div4_clk>;
 			clock-names = "timer1", "timer2", "apb_pclk";
 			status = "disabled";
 		};

 		timer1: timer@00040000 {
 			compatible = "arm,sp804", "arm,primecell";
 			reg = <0x00040000 0x1000>;
 			interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&hsls_25m_div2_clk>,
 				 <&hsls_25m_div2_clk>,
 				 <&hsls_div4_clk>;
 			clock-names = "timer1", "timer2", "apb_pclk";
 		};

 		timer2: timer@00050000 {
 			compatible = "arm,sp804", "arm,primecell";
 			reg = <0x00050000 0x1000>;
 			interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&hsls_25m_div2_clk>,
 				 <&hsls_25m_div2_clk>,
 				 <&hsls_div4_clk>;
 			clock-names = "timer1", "timer2", "apb_pclk";
 			status = "disabled";
 		};

 		timer3: timer@00060000 {
 			compatible = "arm,sp804", "arm,primecell";
 			reg = <0x00060000 0x1000>;
 			interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&hsls_25m_div2_clk>,
 				 <&hsls_25m_div2_clk>,
 				 <&hsls_div4_clk>;
 			clock-names = "timer1", "timer2", "apb_pclk";
 			status = "disabled";
 		};

 		timer4: timer@00070000 {
 			compatible = "arm,sp804", "arm,primecell";
 			reg = <0x00070000 0x1000>;
 			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&hsls_25m_div2_clk>,
 				 <&hsls_25m_div2_clk>,
 				 <&hsls_div4_clk>;
 			clock-names = "timer1", "timer2", "apb_pclk";
 			status = "disabled";
 		};

 		timer5: timer@00080000 {
 			compatible = "arm,sp804", "arm,primecell";
 			reg = <0x00080000 0x1000>;
 			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&hsls_25m_div2_clk>,
 				 <&hsls_25m_div2_clk>,
 				 <&hsls_div4_clk>;
 			clock-names = "timer1", "timer2", "apb_pclk";
 			status = "disabled";
 		};

 		timer6: timer@00090000 {
 			compatible = "arm,sp804", "arm,primecell";
 			reg = <0x00090000 0x1000>;
 			interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&hsls_25m_div2_clk>,
 				 <&hsls_25m_div2_clk>,
 				 <&hsls_div4_clk>;
 			clock-names = "timer1", "timer2", "apb_pclk";
 			status = "disabled";
 		};

 		timer7: timer@000a0000 {
 			compatible = "arm,sp804", "arm,primecell";
 			reg = <0x000a0000 0x1000>;
 			interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&hsls_25m_div2_clk>,
 				 <&hsls_25m_div2_clk>,
 				 <&hsls_div4_clk>;
 			clock-names = "timer1", "timer2", "apb_pclk";
 			status = "disabled";
 		};

 		i2c0: i2c@000b0000 {
 			compatible = "brcm,iproc-i2c";
 			reg = <0x000b0000 0x100>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			interrupts = <GIC_SPI 177 IRQ_TYPE_NONE>;
 			clock-frequency = <100000>;
 			status = "disabled";
 		};

 		wdt0: watchdog@000c0000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x000c0000 0x1000>;
 			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&hsls_25m_div2_clk>, <&hsls_div4_clk>;
 			clock-names = "wdogclk", "apb_pclk";
 		};

 		gpio_hsls: gpio@000d0000 {
 			compatible = "brcm,iproc-gpio";
 			reg = <0x000d0000 0x864>;
 			ngpios = <151>;
 			#gpio-cells = <2>;
 			gpio-controller;
 			interrupt-controller;
 			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-ranges = <&pinmux 0 0 16>,
 					<&pinmux 16 71 2>,
 					<&pinmux 18 131 8>,
 					<&pinmux 26 83 6>,
 					<&pinmux 32 123 4>,
 					<&pinmux 36 43 24>,
 					<&pinmux 60 89 2>,
 					<&pinmux 62 73 4>,
 					<&pinmux 66 95 28>,
 					<&pinmux 94 127 4>,
 					<&pinmux 98 139 10>,
 					<&pinmux 108 16 27>,
 					<&pinmux 135 77 6>,
 					<&pinmux 141 67 4>,
 					<&pinmux 145 149 6>,
 					<&pinmux 151 91 4>;
 		};

 		i2c1: i2c@000e0000 {
 			compatible = "brcm,iproc-i2c";
 			reg = <0x000e0000 0x100>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			interrupts = <GIC_SPI 178 IRQ_TYPE_NONE>;
 			clock-frequency = <100000>;
 			status = "disabled";
 		};

 		uart0: uart@00100000 {
 			device_type = "serial";
 			compatible = "snps,dw-apb-uart";
 			reg = <0x00100000 0x1000>;
 			reg-shift = <2>;
 			clock-frequency = <25000000>;
 			interrupt-parent = <&gic>;
 			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};

 		uart1: uart@00110000 {
 			device_type = "serial";
 			compatible = "snps,dw-apb-uart";
 			reg = <0x00110000 0x1000>;
 			reg-shift = <2>;
 			clock-frequency = <25000000>;
 			interrupt-parent = <&gic>;
 			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};

 		uart2: uart@00120000 {
 			device_type = "serial";
 			compatible = "snps,dw-apb-uart";
 			reg = <0x00120000 0x1000>;
 			reg-shift = <2>;
 			clock-frequency = <25000000>;
 			interrupt-parent = <&gic>;
 			interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};

 		uart3: uart@00130000 {
 			device_type = "serial";
 			compatible = "snps,dw-apb-uart";
 			reg = <0x00130000 0x1000>;
 			reg-shift = <2>;
 			clock-frequency = <25000000>;
 			interrupt-parent = <&gic>;
 			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};

 		ssp0: ssp@00180000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x00180000 0x1000>;
 			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&hsls_div2_clk>, <&hsls_div2_clk>;
 			clock-names = "spiclk", "apb_pclk";
 			num-cs = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
 		};

 		ssp1: ssp@00190000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x00190000 0x1000>;
 			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&hsls_div2_clk>, <&hsls_div2_clk>;
 			clock-names = "spiclk", "apb_pclk";
 			num-cs = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
 		};

 		hwrng: hwrng@00220000 {
 			compatible = "brcm,iproc-rng200";
 			reg = <0x00220000 0x28>;
 		};

 		dma0: dma@00310000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x00310000 0x1000>;
 			interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
 			#dma-channels = <8>;
 			#dma-requests = <32>;
 			clocks = <&hsls_div2_clk>;
 			clock-names = "apb_pclk";
 			iommus = <&smmu 0x6000 0x0000>;
 		};

 		enet: ethernet@00340000{
 			compatible = "brcm,amac";
 			reg = <0x00340000 0x1000>;
 			reg-names = "amac_base";
 			dma-coherent;
 			interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>;
 			status= "disabled";
 		};

 		nand: nand@00360000 {
 			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
 			reg = <0x00360000 0x600>,
 			      <0x0050a408 0x600>,
 			      <0x00360f00 0x20>;
 			reg-names = "nand", "iproc-idm", "iproc-ext";
 			interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			brcm,nand-has-wp;
 			status = "disabled";
 		};

 		sdio0: sdhci@003f1000 {
 			compatible = "brcm,sdhci-iproc";
 			reg = <0x003f1000 0x100>;
 			interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
 			bus-width = <8>;
 			clocks = <&sdio0_clk>;
 			iommus = <&smmu 0x6002 0x0000>;
 			status = "disabled";
 		};

 		sdio1: sdhci@003f2000 {
 			compatible = "brcm,sdhci-iproc";
 			reg = <0x003f2000 0x100>;
 			interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
 			bus-width = <8>;
 			clocks = <&sdio1_clk>;
 			iommus = <&smmu 0x6003 0x0000>;
 			status = "disabled";
 		};
 	};
 };
	/*
	* BSD LICENSE
	*
	* Copyright(c) 2015-2017 Broadcom. All rights reserved.
	*
	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions
	* are met:
	*
	* * Redistributions of source code must retain the above copyright
	* notice, this list of conditions and the following disclaimer.
	* * Redistributions in binary form must reproduce the above copyright
	* notice, this list of conditions and the following disclaimer in
	* the documentation and/or other materials provided with the
	* distribution.
	* * Neither the name of Broadcom nor the names of its
	* contributors may be used to endorse or promote products derived
	* from this software without specific prior written permission.
	*
	* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
	* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
	* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
	* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
	* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
	* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
	* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
	* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
	* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
	* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	*/

	#include <dt-bindings/interrupt-controller/arm-gic.h>

	/ {
	compatible = "brcm,stingray";
	interrupt-parent = <&gic>;
	#address-cells = <2>;
	#size-cells = <2>;

	cpus {
	#address-cells = <2>;
	#size-cells = <0>;

	cpu@000 {
	device_type = "cpu";
	compatible = "arm,cortex-a72", "arm,armv8";
	reg = <0x0 0x0>;
	enable-method = "psci";
	next-level-cache = <&CLUSTER0_L2>;
	};

	cpu@001 {
	device_type = "cpu";
	compatible = "arm,cortex-a72", "arm,armv8";
	reg = <0x0 0x1>;
	enable-method = "psci";
	next-level-cache = <&CLUSTER0_L2>;
	};

	cpu@100 {
	device_type = "cpu";
	compatible = "arm,cortex-a72", "arm,armv8";
	reg = <0x0 0x100>;
	enable-method = "psci";
	next-level-cache = <&CLUSTER1_L2>;
	};

	cpu@101 {
	device_type = "cpu";
	compatible = "arm,cortex-a72", "arm,armv8";
	reg = <0x0 0x101>;
	enable-method = "psci";
	next-level-cache = <&CLUSTER1_L2>;
	};

	cpu@200 {
	device_type = "cpu";
	compatible = "arm,cortex-a72", "arm,armv8";
	reg = <0x0 0x200>;
	enable-method = "psci";
	next-level-cache = <&CLUSTER2_L2>;
	};

	cpu@201 {
	device_type = "cpu";
	compatible = "arm,cortex-a72", "arm,armv8";
	reg = <0x0 0x201>;
	enable-method = "psci";
	next-level-cache = <&CLUSTER2_L2>;
	};

	cpu@300 {
	device_type = "cpu";
	compatible = "arm,cortex-a72", "arm,armv8";
	reg = <0x0 0x300>;
	enable-method = "psci";
	next-level-cache = <&CLUSTER3_L2>;
	};

	cpu@301 {
	device_type = "cpu";
	compatible = "arm,cortex-a72", "arm,armv8";
	reg = <0x0 0x301>;
	enable-method = "psci";
	next-level-cache = <&CLUSTER3_L2>;
	};

	CLUSTER0_L2: l2-cache@000 {
	compatible = "cache";
	};

	CLUSTER1_L2: l2-cache@100 {
	compatible = "cache";
	};

	CLUSTER2_L2: l2-cache@200 {
	compatible = "cache";
	};

	CLUSTER3_L2: l2-cache@300 {
	compatible = "cache";
	};
	};

	memory: memory@80000000 {
	device_type = "memory";
	reg = <0x00000000 0x80000000 0 0x40000000>;
	};

	psci {
	compatible = "arm,psci-0.2";
	method = "smc";
	};

	pmu {
	compatible = "arm,armv8-pmuv3";
	interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
	};

	timer {
	compatible = "arm,armv8-timer";
	interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
	<GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
	<GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
	<GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
	};

	scr {
	compatible = "simple-bus";
	#address-cells = <1>;
	#size-cells = <1>;
	ranges = <0x0 0x0 0x61000000 0x05000000>;

	ccn: ccn@00000000 {
	compatible = "arm,ccn-502";
	reg = <0x00000000 0x900000>;
	interrupts = <GIC_SPI 799 IRQ_TYPE_LEVEL_HIGH>;
	};

	gic: interrupt-controller@02c00000 {
	compatible = "arm,gic-v3";
	#interrupt-cells = <3>;
	#address-cells = <1>;
	#size-cells = <1>;
	ranges;
	interrupt-controller;
	reg = <0x02c00000 0x010000>, /* GICD */
	<0x02e00000 0x600000>; /* GICR */
	interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;

	gic_its: gic-its@63c20000 {
	compatible = "arm,gic-v3-its";
	msi-controller;
	#msi-cells = <1>;
	reg = <0x02c20000 0x10000>;
	};
	};

	smmu: mmu@03000000 {
	compatible = "arm,mmu-500";
	reg = <0x03000000 0x80000>;
	#global-interrupts = <1>;
	interrupts = <GIC_SPI 704 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 711 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 712 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 713 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 714 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 715 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 716 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 717 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 718 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 719 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 720 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 721 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 722 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 723 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 724 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 725 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 726 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 727 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 728 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 729 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 730 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 731 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 732 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 733 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 734 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 735 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 736 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 737 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 738 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 739 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 740 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 741 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 742 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 743 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 744 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 745 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 746 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 747 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 748 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 749 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 750 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 751 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 752 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 753 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 754 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 755 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 756 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 757 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 758 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 759 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 760 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 761 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 762 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 763 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 764 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 765 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 766 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 767 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 768 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 769 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 770 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 771 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 772 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 773 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>;
	#iommu-cells = <2>;
	};
	};

	crmu: crmu {
	compatible = "simple-bus";
	#address-cells = <1>;
	#size-cells = <1>;
	ranges = <0x0 0x0 0x66400000 0x100000>;

	#include "stingray-clock.dtsi"

	gpio_crmu: gpio@00024800 {
	compatible = "brcm,iproc-gpio";
	reg = <0x00024800 0x4c>;
	ngpios = <6>;
	#gpio-cells = <2>;
	gpio-controller;
	};
	};

	#include "stingray-fs4.dtsi"
	#include "stingray-sata.dtsi"

	hsls {
	compatible = "simple-bus";
	#address-cells = <1>;
	#size-cells = <1>;
	ranges = <0x0 0x0 0x68900000 0x17700000>;

	#include "stingray-pinctrl.dtsi"

	mdio_mux_iproc: mdio-mux@0002023c {
	compatible = "brcm,mdio-mux-iproc";
	reg = <0x0002023c 0x14>;
	#address-cells = <1>;
	#size-cells = <0>;

	mdio@0 { /* PCIe serdes */
	reg = <0x0>;
	#address-cells = <1>;
	#size-cells = <0>;
	};

	mdio@2 { /* SATA */
	reg = <0x2>;
	#address-cells = <1>;
	#size-cells = <0>;
	};

	mdio@3 { /* USB */
	reg = <0x3>;
	#address-cells = <1>;
	#size-cells = <0>;
	};

	mdio@10 { /* RGMII */
	reg = <0x10>;
	#address-cells = <1>;
	#size-cells = <0>;
	};
	};

	pwm: pwm@00010000 {
	compatible = "brcm,iproc-pwm";
	reg = <0x00010000 0x1000>;
	clocks = <&crmu_ref25m>;
	#pwm-cells = <3>;
	status = "disabled";
	};

	timer0: timer@00030000 {
	compatible = "arm,sp804", "arm,primecell";
	reg = <0x00030000 0x1000>;
	interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&hsls_25m_div2_clk>,
	<&hsls_25m_div2_clk>,
	<&hsls_div4_clk>;
	clock-names = "timer1", "timer2", "apb_pclk";
	status = "disabled";
	};

	timer1: timer@00040000 {
	compatible = "arm,sp804", "arm,primecell";
	reg = <0x00040000 0x1000>;
	interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&hsls_25m_div2_clk>,
	<&hsls_25m_div2_clk>,
	<&hsls_div4_clk>;
	clock-names = "timer1", "timer2", "apb_pclk";
	};

	timer2: timer@00050000 {
	compatible = "arm,sp804", "arm,primecell";
	reg = <0x00050000 0x1000>;
	interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&hsls_25m_div2_clk>,
	<&hsls_25m_div2_clk>,
	<&hsls_div4_clk>;
	clock-names = "timer1", "timer2", "apb_pclk";
	status = "disabled";
	};

	timer3: timer@00060000 {
	compatible = "arm,sp804", "arm,primecell";
	reg = <0x00060000 0x1000>;
	interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&hsls_25m_div2_clk>,
	<&hsls_25m_div2_clk>,
	<&hsls_div4_clk>;
	clock-names = "timer1", "timer2", "apb_pclk";
	status = "disabled";
	};

	timer4: timer@00070000 {
	compatible = "arm,sp804", "arm,primecell";
	reg = <0x00070000 0x1000>;
	interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&hsls_25m_div2_clk>,
	<&hsls_25m_div2_clk>,
	<&hsls_div4_clk>;
	clock-names = "timer1", "timer2", "apb_pclk";
	status = "disabled";
	};

	timer5: timer@00080000 {
	compatible = "arm,sp804", "arm,primecell";
	reg = <0x00080000 0x1000>;
	interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&hsls_25m_div2_clk>,
	<&hsls_25m_div2_clk>,
	<&hsls_div4_clk>;
	clock-names = "timer1", "timer2", "apb_pclk";
	status = "disabled";
	};

	timer6: timer@00090000 {
	compatible = "arm,sp804", "arm,primecell";
	reg = <0x00090000 0x1000>;
	interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&hsls_25m_div2_clk>,
	<&hsls_25m_div2_clk>,
	<&hsls_div4_clk>;
	clock-names = "timer1", "timer2", "apb_pclk";
	status = "disabled";
	};

	timer7: timer@000a0000 {
	compatible = "arm,sp804", "arm,primecell";
	reg = <0x000a0000 0x1000>;
	interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&hsls_25m_div2_clk>,
	<&hsls_25m_div2_clk>,
	<&hsls_div4_clk>;
	clock-names = "timer1", "timer2", "apb_pclk";
	status = "disabled";
	};

	i2c0: i2c@000b0000 {
	compatible = "brcm,iproc-i2c";
	reg = <0x000b0000 0x100>;
	#address-cells = <1>;
	#size-cells = <0>;
	interrupts = <GIC_SPI 177 IRQ_TYPE_NONE>;
	clock-frequency = <100000>;
	status = "disabled";
	};

	wdt0: watchdog@000c0000 {
	compatible = "arm,sp805", "arm,primecell";
	reg = <0x000c0000 0x1000>;
	interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&hsls_25m_div2_clk>, <&hsls_div4_clk>;
	clock-names = "wdogclk", "apb_pclk";
	};

	gpio_hsls: gpio@000d0000 {
	compatible = "brcm,iproc-gpio";
	reg = <0x000d0000 0x864>;
	ngpios = <151>;
	#gpio-cells = <2>;
	gpio-controller;
	interrupt-controller;
	interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
	gpio-ranges = <&pinmux 0 0 16>,
	<&pinmux 16 71 2>,
	<&pinmux 18 131 8>,
	<&pinmux 26 83 6>,
	<&pinmux 32 123 4>,
	<&pinmux 36 43 24>,
	<&pinmux 60 89 2>,
	<&pinmux 62 73 4>,
	<&pinmux 66 95 28>,
	<&pinmux 94 127 4>,
	<&pinmux 98 139 10>,
	<&pinmux 108 16 27>,
	<&pinmux 135 77 6>,
	<&pinmux 141 67 4>,
	<&pinmux 145 149 6>,
	<&pinmux 151 91 4>;
	};

	i2c1: i2c@000e0000 {
	compatible = "brcm,iproc-i2c";
	reg = <0x000e0000 0x100>;
	#address-cells = <1>;
	#size-cells = <0>;
	interrupts = <GIC_SPI 178 IRQ_TYPE_NONE>;
	clock-frequency = <100000>;
	status = "disabled";
	};

	uart0: uart@00100000 {
	device_type = "serial";
	compatible = "snps,dw-apb-uart";
	reg = <0x00100000 0x1000>;
	reg-shift = <2>;
	clock-frequency = <25000000>;
	interrupt-parent = <&gic>;
	interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
	status = "disabled";
	};

	uart1: uart@00110000 {
	device_type = "serial";
	compatible = "snps,dw-apb-uart";
	reg = <0x00110000 0x1000>;
	reg-shift = <2>;
	clock-frequency = <25000000>;
	interrupt-parent = <&gic>;
	interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
	status = "disabled";
	};

	uart2: uart@00120000 {
	device_type = "serial";
	compatible = "snps,dw-apb-uart";
	reg = <0x00120000 0x1000>;
	reg-shift = <2>;
	clock-frequency = <25000000>;
	interrupt-parent = <&gic>;
	interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
	status = "disabled";
	};

	uart3: uart@00130000 {
	device_type = "serial";
	compatible = "snps,dw-apb-uart";
	reg = <0x00130000 0x1000>;
	reg-shift = <2>;
	clock-frequency = <25000000>;
	interrupt-parent = <&gic>;
	interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
	status = "disabled";
	};

	ssp0: ssp@00180000 {
	compatible = "arm,pl022", "arm,primecell";
	reg = <0x00180000 0x1000>;
	interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&hsls_div2_clk>, <&hsls_div2_clk>;
	clock-names = "spiclk", "apb_pclk";
	num-cs = <1>;
	#address-cells = <1>;
	#size-cells = <0>;
	status = "disabled";
	};

	ssp1: ssp@00190000 {
	compatible = "arm,pl022", "arm,primecell";
	reg = <0x00190000 0x1000>;
	interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&hsls_div2_clk>, <&hsls_div2_clk>;
	clock-names = "spiclk", "apb_pclk";
	num-cs = <1>;
	#address-cells = <1>;
	#size-cells = <0>;
	status = "disabled";
	};

	hwrng: hwrng@00220000 {
	compatible = "brcm,iproc-rng200";
	reg = <0x00220000 0x28>;
	};

	dma0: dma@00310000 {
	compatible = "arm,pl330", "arm,primecell";
	reg = <0x00310000 0x1000>;
	interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
	#dma-cells = <1>;
	#dma-channels = <8>;
	#dma-requests = <32>;
	clocks = <&hsls_div2_clk>;
	clock-names = "apb_pclk";
	iommus = <&smmu 0x6000 0x0000>;
	};

	enet: ethernet@00340000{
	compatible = "brcm,amac";
	reg = <0x00340000 0x1000>;
	reg-names = "amac_base";
	dma-coherent;
	interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>;
	status= "disabled";
	};

	nand: nand@00360000 {
	compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
	reg = <0x00360000 0x600>,
	<0x0050a408 0x600>,
	<0x00360f00 0x20>;
	reg-names = "nand", "iproc-idm", "iproc-ext";
	interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
	#address-cells = <1>;
	#size-cells = <0>;
	brcm,nand-has-wp;
	status = "disabled";
	};

	sdio0: sdhci@003f1000 {
	compatible = "brcm,sdhci-iproc";
	reg = <0x003f1000 0x100>;
	interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
	bus-width = <8>;
	clocks = <&sdio0_clk>;
	iommus = <&smmu 0x6002 0x0000>;
	status = "disabled";
	};

	sdio1: sdhci@003f2000 {
	compatible = "brcm,sdhci-iproc";
	reg = <0x003f2000 0x100>;
	interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
	bus-width = <8>;
	clocks = <&sdio1_clk>;
	iommus = <&smmu 0x6003 0x0000>;
	status = "disabled";
	};
	};
	};