diff --git a/CREDITS b/CREDITS
index d8fe12a..2346b09 100644
--- a/CREDITS
+++ b/CREDITS
@@ -1823,6 +1823,11 @@
 S: D-64295
 S: Germany
 
+N: Avi Kivity
+E: avi.kivity@gmail.com
+D: Kernel-based Virtual Machine (KVM)
+S: Ra'annana, Israel
+
 N: Andi Kleen
 E: andi@firstfloor.org
 U: http://www.halobates.de
diff --git a/Documentation/ABI/testing/sysfs-class-devfreq b/Documentation/ABI/testing/sysfs-class-devfreq
index 23d78b5..0ba6ea2 100644
--- a/Documentation/ABI/testing/sysfs-class-devfreq
+++ b/Documentation/ABI/testing/sysfs-class-devfreq
@@ -11,7 +11,7 @@
 Date:		September 2011
 Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
 Description:
-		The /sys/class/devfreq/.../governor shows the name of the
+		The /sys/class/devfreq/.../governor show or set the name of the
 		governor used by the corresponding devfreq object.
 
 What:		/sys/class/devfreq/.../cur_freq
@@ -19,15 +19,16 @@
 Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
 Description:
 		The /sys/class/devfreq/.../cur_freq shows the current
-		frequency of the corresponding devfreq object.
+		frequency of the corresponding devfreq object. Same as
+		target_freq when get_cur_freq() is not implemented by
+		devfreq driver.
 
-What:		/sys/class/devfreq/.../central_polling
-Date:		September 2011
-Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+What:		/sys/class/devfreq/.../target_freq
+Date:		September 2012
+Contact:	Rajagopal Venkat <rajagopal.venkat@linaro.org>
 Description:
-		The /sys/class/devfreq/.../central_polling shows whether
-		the devfreq ojbect is using devfreq-provided central
-		polling mechanism or not.
+		The /sys/class/devfreq/.../target_freq shows the next governor
+		predicted target frequency of the corresponding devfreq object.
 
 What:		/sys/class/devfreq/.../polling_interval
 Date:		September 2011
@@ -43,6 +44,17 @@
 		(/sys/class/devfreq/.../central_polling is 0), this value
 		may be useless.
 
+What:		/sys/class/devfreq/.../trans_stat
+Date:		October 2012
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Descrtiption:
+		This ABI shows the statistics of devfreq behavior on a
+		specific device. It shows the time spent in each state and
+		the number of transitions between states.
+		In order to activate this ABI, the devfreq target device
+		driver should provide the list of available frequencies
+		with its profile.
+
 What:		/sys/class/devfreq/.../userspace/set_freq
 Date:		September 2011
 Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
@@ -50,3 +62,19 @@
 		The /sys/class/devfreq/.../userspace/set_freq shows and
 		sets the requested frequency for the devfreq object if
 		userspace governor is in effect.
+
+What:		/sys/class/devfreq/.../available_frequencies
+Date:		October 2012
+Contact:	Nishanth Menon <nm@ti.com>
+Description:
+		The /sys/class/devfreq/.../available_frequencies shows
+		the available frequencies of the corresponding devfreq object.
+		This is a snapshot of available frequencies and not limited
+		by the min/max frequency restrictions.
+
+What:		/sys/class/devfreq/.../available_governors
+Date:		October 2012
+Contact:	Nishanth Menon <nm@ti.com>
+Description:
+		The /sys/class/devfreq/.../available_governors shows
+		currently available governors in the system.
diff --git a/Documentation/ABI/testing/sysfs-devices-power b/Documentation/ABI/testing/sysfs-devices-power
index 45000f0..7fc2997 100644
--- a/Documentation/ABI/testing/sysfs-devices-power
+++ b/Documentation/ABI/testing/sysfs-devices-power
@@ -204,3 +204,34 @@
 
 		This attribute has no effect on system-wide suspend/resume and
 		hibernation.
+
+What:		/sys/devices/.../power/pm_qos_no_power_off
+Date:		September 2012
+Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+		The /sys/devices/.../power/pm_qos_no_power_off attribute
+		is used for manipulating the PM QoS "no power off" flag.  If
+		set, this flag indicates to the kernel that power should not
+		be removed entirely from the device.
+
+		Not all drivers support this attribute.  If it isn't supported,
+		it is not present.
+
+		This attribute has no effect on system-wide suspend/resume and
+		hibernation.
+
+What:		/sys/devices/.../power/pm_qos_remote_wakeup
+Date:		September 2012
+Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+		The /sys/devices/.../power/pm_qos_remote_wakeup attribute
+		is used for manipulating the PM QoS "remote wakeup required"
+		flag.  If set, this flag indicates to the kernel that the
+		device is a source of user events that have to be signaled from
+		its low-power states.
+
+		Not all drivers support this attribute.  If it isn't supported,
+		it is not present.
+
+		This attribute has no effect on system-wide suspend/resume and
+		hibernation.
diff --git a/Documentation/ABI/testing/sysfs-devices-sun b/Documentation/ABI/testing/sysfs-devices-sun
new file mode 100644
index 0000000..86be984
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-devices-sun
@@ -0,0 +1,14 @@
+Whatt:		/sys/devices/.../sun
+Date:		October 2012
+Contact:	Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
+Description:
+		The file contains a Slot-unique ID which provided by the _SUN
+		method in the ACPI namespace. The value is written in Advanced
+		Configuration and Power Interface Specification as follows:
+
+		"The _SUN value is required to be unique among the slots of
+		the same type. It is also recommended that this number match
+		the slot number printed on the physical slot whenever possible."
+
+		So reading the sysfs file, we can identify a physical position
+		of the slot in the system.
diff --git a/Documentation/IRQ-domain.txt b/Documentation/IRQ-domain.txt
index 1401cec..9bc9594 100644
--- a/Documentation/IRQ-domain.txt
+++ b/Documentation/IRQ-domain.txt
@@ -7,6 +7,21 @@
 that each one gets assigned non-overlapping allocations of Linux
 IRQ numbers.
 
+The number of interrupt controllers registered as unique irqchips
+show a rising tendency: for example subdrivers of different kinds
+such as GPIO controllers avoid reimplementing identical callback
+mechanisms as the IRQ core system by modelling their interrupt
+handlers as irqchips, i.e. in effect cascading interrupt controllers.
+
+Here the interrupt number loose all kind of correspondence to
+hardware interrupt numbers: whereas in the past, IRQ numbers could
+be chosen so they matched the hardware IRQ line into the root
+interrupt controller (i.e. the component actually fireing the
+interrupt line to the CPU) nowadays this number is just a number.
+
+For this reason we need a mechanism to separate controller-local
+interrupt numbers, called hardware irq's, from Linux IRQ numbers.
+
 The irq_alloc_desc*() and irq_free_desc*() APIs provide allocation of
 irq numbers, but they don't provide any support for reverse mapping of
 the controller-local IRQ (hwirq) number into the Linux IRQ number
@@ -40,6 +55,10 @@
 When an interrupt is received, irq_find_mapping() function should
 be used to find the Linux IRQ number from the hwirq number.
 
+The irq_create_mapping() function must be called *atleast once*
+before any call to irq_find_mapping(), lest the descriptor will not
+be allocated.
+
 If the driver has the Linux IRQ number or the irq_data pointer, and
 needs to know the associated hwirq number (such as in the irq_chip
 callbacks) then it can be directly obtained from irq_data->hwirq.
@@ -119,4 +138,17 @@
 
 Most users of legacy mappings should use irq_domain_add_simple() which
 will use a legacy domain only if an IRQ range is supplied by the
-system and will otherwise use a linear domain mapping.
+system and will otherwise use a linear domain mapping. The semantics
+of this call are such that if an IRQ range is specified then
+descriptors will be allocated on-the-fly for it, and if no range is
+specified it will fall through to irq_domain_add_linear() which meand
+*no* irq descriptors will be allocated.
+
+A typical use case for simple domains is where an irqchip provider
+is supporting both dynamic and static IRQ assignments.
+
+In order to avoid ending up in a situation where a linear domain is
+used and no descriptor gets allocated it is very important to make sure
+that the driver using the simple domain call irq_create_mapping()
+before any irq_find_mapping() since the latter will actually work
+for the static IRQ assignment case.
diff --git a/Documentation/acpi/enumeration.txt b/Documentation/acpi/enumeration.txt
new file mode 100644
index 0000000..4f27785
--- /dev/null
+++ b/Documentation/acpi/enumeration.txt
@@ -0,0 +1,227 @@
+ACPI based device enumeration
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ACPI 5 introduced a set of new resources (UartTSerialBus, I2cSerialBus,
+SpiSerialBus, GpioIo and GpioInt) which can be used in enumerating slave
+devices behind serial bus controllers.
+
+In addition we are starting to see peripherals integrated in the
+SoC/Chipset to appear only in ACPI namespace. These are typically devices
+that are accessed through memory-mapped registers.
+
+In order to support this and re-use the existing drivers as much as
+possible we decided to do following:
+
+	o Devices that have no bus connector resource are represented as
+	  platform devices.
+
+	o Devices behind real busses where there is a connector resource
+	  are represented as struct spi_device or struct i2c_device
+	  (standard UARTs are not busses so there is no struct uart_device).
+
+As both ACPI and Device Tree represent a tree of devices (and their
+resources) this implementation follows the Device Tree way as much as
+possible.
+
+The ACPI implementation enumerates devices behind busses (platform, SPI and
+I2C), creates the physical devices and binds them to their ACPI handle in
+the ACPI namespace.
+
+This means that when ACPI_HANDLE(dev) returns non-NULL the device was
+enumerated from ACPI namespace. This handle can be used to extract other
+device-specific configuration. There is an example of this below.
+
+Platform bus support
+~~~~~~~~~~~~~~~~~~~~
+Since we are using platform devices to represent devices that are not
+connected to any physical bus we only need to implement a platform driver
+for the device and add supported ACPI IDs. If this same IP-block is used on
+some other non-ACPI platform, the driver might work out of the box or needs
+some minor changes.
+
+Adding ACPI support for an existing driver should be pretty
+straightforward. Here is the simplest example:
+
+	#ifdef CONFIG_ACPI
+	static struct acpi_device_id mydrv_acpi_match[] = {
+		/* ACPI IDs here */
+		{ }
+	};
+	MODULE_DEVICE_TABLE(acpi, mydrv_acpi_match);
+	#endif
+
+	static struct platform_driver my_driver = {
+		...
+		.driver = {
+			.acpi_match_table = ACPI_PTR(mydrv_acpi_match),
+		},
+	};
+
+If the driver needs to perform more complex initialization like getting and
+configuring GPIOs it can get its ACPI handle and extract this information
+from ACPI tables.
+
+Currently the kernel is not able to automatically determine from which ACPI
+device it should make the corresponding platform device so we need to add
+the ACPI device explicitly to acpi_platform_device_ids list defined in
+drivers/acpi/scan.c. This limitation is only for the platform devices, SPI
+and I2C devices are created automatically as described below.
+
+SPI serial bus support
+~~~~~~~~~~~~~~~~~~~~~~
+Slave devices behind SPI bus have SpiSerialBus resource attached to them.
+This is extracted automatically by the SPI core and the slave devices are
+enumerated once spi_register_master() is called by the bus driver.
+
+Here is what the ACPI namespace for a SPI slave might look like:
+
+	Device (EEP0)
+	{
+		Name (_ADR, 1)
+		Name (_CID, Package() {
+			"ATML0025",
+			"AT25",
+		})
+		...
+		Method (_CRS, 0, NotSerialized)
+		{
+			SPISerialBus(1, PolarityLow, FourWireMode, 8,
+				ControllerInitiated, 1000000, ClockPolarityLow,
+				ClockPhaseFirst, "\\_SB.PCI0.SPI1",)
+		}
+		...
+
+The SPI device drivers only need to add ACPI IDs in a similar way than with
+the platform device drivers. Below is an example where we add ACPI support
+to at25 SPI eeprom driver (this is meant for the above ACPI snippet):
+
+	#ifdef CONFIG_ACPI
+	static struct acpi_device_id at25_acpi_match[] = {
+		{ "AT25", 0 },
+		{ },
+	};
+	MODULE_DEVICE_TABLE(acpi, at25_acpi_match);
+	#endif
+
+	static struct spi_driver at25_driver = {
+		.driver = {
+			...
+			.acpi_match_table = ACPI_PTR(at25_acpi_match),
+		},
+	};
+
+Note that this driver actually needs more information like page size of the
+eeprom etc. but at the time writing this there is no standard way of
+passing those. One idea is to return this in _DSM method like:
+
+	Device (EEP0)
+	{
+		...
+		Method (_DSM, 4, NotSerialized)
+		{
+			Store (Package (6)
+			{
+				"byte-len", 1024,
+				"addr-mode", 2,
+				"page-size, 32
+			}, Local0)
+
+			// Check UUIDs etc.
+
+			Return (Local0)
+		}
+
+Then the at25 SPI driver can get this configation by calling _DSM on its
+ACPI handle like:
+
+	struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
+	struct acpi_object_list input;
+	acpi_status status;
+
+	/* Fill in the input buffer */
+
+	status = acpi_evaluate_object(ACPI_HANDLE(&spi->dev), "_DSM",
+				      &input, &output);
+	if (ACPI_FAILURE(status))
+		/* Handle the error */
+
+	/* Extract the data here */
+
+	kfree(output.pointer);
+
+I2C serial bus support
+~~~~~~~~~~~~~~~~~~~~~~
+The slaves behind I2C bus controller only need to add the ACPI IDs like
+with the platform and SPI drivers. However the I2C bus controller driver
+needs to call acpi_i2c_register_devices() after it has added the adapter.
+
+An I2C bus (controller) driver does:
+
+	...
+	ret = i2c_add_numbered_adapter(adapter);
+	if (ret)
+		/* handle error */
+
+	of_i2c_register_devices(adapter);
+	/* Enumerate the slave devices behind this bus via ACPI */
+	acpi_i2c_register_devices(adapter);
+
+Below is an example of how to add ACPI support to the existing mpu3050
+input driver:
+
+	#ifdef CONFIG_ACPI
+	static struct acpi_device_id mpu3050_acpi_match[] = {
+		{ "MPU3050", 0 },
+		{ },
+	};
+	MODULE_DEVICE_TABLE(acpi, mpu3050_acpi_match);
+	#endif
+
+	static struct i2c_driver mpu3050_i2c_driver = {
+		.driver	= {
+			.name	= "mpu3050",
+			.owner	= THIS_MODULE,
+			.pm	= &mpu3050_pm,
+			.of_match_table = mpu3050_of_match,
+			.acpi_match_table  ACPI_PTR(mpu3050_acpi_match),
+		},
+		.probe		= mpu3050_probe,
+		.remove		= __devexit_p(mpu3050_remove),
+		.id_table	= mpu3050_ids,
+	};
+
+GPIO support
+~~~~~~~~~~~~
+ACPI 5 introduced two new resources to describe GPIO connections: GpioIo
+and GpioInt. These resources are used be used to pass GPIO numbers used by
+the device to the driver. For example:
+
+	Method (_CRS, 0, NotSerialized)
+	{
+		Name (SBUF, ResourceTemplate()
+		{
+			GpioIo (Exclusive, PullDefault, 0x0000, 0x0000,
+				IoRestrictionOutputOnly, "\\_SB.PCI0.GPI0",
+				0x00, ResourceConsumer,,)
+			{
+				// Pin List
+				0x0055
+			}
+			...
+
+			Return (SBUF)
+		}
+	}
+
+These GPIO numbers are controller relative and path "\\_SB.PCI0.GPI0"
+specifies the path to the controller. In order to use these GPIOs in Linux
+we need to translate them to the Linux GPIO numbers.
+
+The driver can do this by including <linux/acpi_gpio.h> and then calling
+acpi_get_gpio(path, gpio). This will return the Linux GPIO number or
+negative errno if there was no translation found.
+
+Other GpioIo parameters must be converted first by the driver to be
+suitable to the gpiolib before passing them.
+
+In case of GpioInt resource an additional call to gpio_to_irq() must be
+done before calling request_irq().
diff --git a/Documentation/cgroups/memory.txt b/Documentation/cgroups/memory.txt
index c07f7b4..71c4da4 100644
--- a/Documentation/cgroups/memory.txt
+++ b/Documentation/cgroups/memory.txt
@@ -466,6 +466,10 @@
 5.3 swappiness
 
 Similar to /proc/sys/vm/swappiness, but affecting a hierarchy of groups only.
+Please note that unlike the global swappiness, memcg knob set to 0
+really prevents from any swapping even if there is a swap storage
+available. This might lead to memcg OOM killer if there are no file
+pages to reclaim.
 
 Following cgroups' swappiness can't be changed.
 - root cgroup (uses /proc/sys/vm/swappiness).
diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.txt b/Documentation/devicetree/bindings/arm/atmel-at91.txt
index d187e9f..1196290 100644
--- a/Documentation/devicetree/bindings/arm/atmel-at91.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-at91.txt
@@ -7,6 +7,12 @@
 - interrupts: Should contain interrupt for the PIT which is the IRQ line
   shared across all System Controller members.
 
+System Timer (ST) required properties:
+- compatible: Should be "atmel,at91rm9200-st"
+- reg: Should contain registers location and length
+- interrupts: Should contain interrupt for the ST which is the IRQ line
+  shared across all System Controller members.
+
 TC/TCLIB Timer required properties:
 - compatible: Should be "atmel,<chip>-tcb".
   <chip> can be "at91rm9200" or "at91sam9x5"
diff --git a/Documentation/devicetree/bindings/arm/davinci/nand.txt b/Documentation/devicetree/bindings/arm/davinci/nand.txt
index e37241f..49fc7ad 100644
--- a/Documentation/devicetree/bindings/arm/davinci/nand.txt
+++ b/Documentation/devicetree/bindings/arm/davinci/nand.txt
@@ -23,29 +23,16 @@
 - ti,davinci-nand-buswidth: buswidth 8 or 16
 - ti,davinci-nand-use-bbt: use flash based bad block table support.
 
-Example (enbw_cmc board):
-aemif@60000000 {
-	compatible = "ti,davinci-aemif";
-	#address-cells = <2>;
-	#size-cells = <1>;
-	reg = <0x68000000 0x80000>;
-	ranges = <2 0 0x60000000 0x02000000
-		  3 0 0x62000000 0x02000000
-		  4 0 0x64000000 0x02000000
-		  5 0 0x66000000 0x02000000
-		  6 0 0x68000000 0x02000000>;
-	nand@3,0 {
-		compatible = "ti,davinci-nand";
-		reg = <3 0x0 0x807ff
-			6 0x0 0x8000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ti,davinci-chipselect = <1>;
-		ti,davinci-mask-ale = <0>;
-		ti,davinci-mask-cle = <0>;
-		ti,davinci-mask-chipsel = <0>;
-		ti,davinci-ecc-mode = "hw";
-		ti,davinci-ecc-bits = <4>;
-		ti,davinci-nand-use-bbt;
-	};
+Example(da850 EVM ):
+nand_cs3@62000000 {
+	compatible = "ti,davinci-nand";
+	reg = <0x62000000 0x807ff
+		0x68000000 0x8000>;
+	ti,davinci-chipselect = <1>;
+	ti,davinci-mask-ale = <0>;
+	ti,davinci-mask-cle = <0>;
+	ti,davinci-mask-chipsel = <0>;
+	ti,davinci-ecc-mode = "hw";
+	ti,davinci-ecc-bits = <4>;
+	ti,davinci-nand-use-bbt;
 };
diff --git a/Documentation/devicetree/bindings/arm/l2cc.txt b/Documentation/devicetree/bindings/arm/l2cc.txt
index 7ca5216..7c3ee3a 100644
--- a/Documentation/devicetree/bindings/arm/l2cc.txt
+++ b/Documentation/devicetree/bindings/arm/l2cc.txt
@@ -37,7 +37,7 @@
         reg = <0xfff12000 0x1000>;
         arm,data-latency = <1 1 1>;
         arm,tag-latency = <2 2 2>;
-        arm,filter-latency = <0x80000000 0x8000000>;
+        arm,filter-ranges = <0x80000000 0x8000000>;
         cache-unified;
         cache-level = <2>;
 	interrupts = <45>;
diff --git a/Documentation/devicetree/bindings/clock/imx23-clock.txt b/Documentation/devicetree/bindings/clock/imx23-clock.txt
index a0b867e..baadbb1 100644
--- a/Documentation/devicetree/bindings/clock/imx23-clock.txt
+++ b/Documentation/devicetree/bindings/clock/imx23-clock.txt
@@ -52,7 +52,7 @@
 	lcdif		38
 	etm		39
 	usb		40
-	usb_pwr		41
+	usb_phy		41
 
 Examples:
 
diff --git a/Documentation/devicetree/bindings/clock/imx28-clock.txt b/Documentation/devicetree/bindings/clock/imx28-clock.txt
index aa2af28..52a49a4 100644
--- a/Documentation/devicetree/bindings/clock/imx28-clock.txt
+++ b/Documentation/devicetree/bindings/clock/imx28-clock.txt
@@ -73,8 +73,8 @@
 	can1		59
 	usb0		60
 	usb1		61
-	usb0_pwr	62
-	usb1_pwr	63
+	usb0_phy	62
+	usb1_phy	63
 	enet_out	64
 
 Examples:
diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-spear.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-spear.txt
new file mode 100644
index 0000000..f3d44984
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-spear.txt
@@ -0,0 +1,42 @@
+SPEAr cpufreq driver
+-------------------
+
+SPEAr SoC cpufreq driver for CPU frequency scaling.
+It supports both uniprocessor (UP) and symmetric multiprocessor (SMP) systems
+which share clock across all CPUs.
+
+Required properties:
+- cpufreq_tbl: Table of frequencies CPU could be transitioned into, in the
+  increasing order.
+
+Optional properties:
+- clock-latency: Specify the possible maximum transition latency for clock, in
+  unit of nanoseconds.
+
+Both required and optional properties listed above must be defined under node
+/cpus/cpu@0.
+
+Examples:
+--------
+cpus {
+
+	<...>
+
+	cpu@0 {
+		compatible = "arm,cortex-a9";
+		reg = <0>;
+
+		<...>
+
+		cpufreq_tbl = < 166000
+				200000
+				250000
+				300000
+				400000
+				500000
+				600000 >;
+	};
+
+	<...>
+
+};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-stmpe.txt b/Documentation/devicetree/bindings/gpio/gpio-stmpe.txt
new file mode 100644
index 0000000..a0e4cf8
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-stmpe.txt
@@ -0,0 +1,18 @@
+STMPE gpio
+----------
+
+Required properties:
+ - compatible: "st,stmpe-gpio"
+
+Optional properties:
+ - st,norequest-mask: bitmask specifying which GPIOs should _not_ be requestable
+   due to different usage (e.g. touch, keypad)
+
+Node name must be stmpe_gpio and should be child node of stmpe node to which it
+belongs.
+
+Example:
+	stmpe_gpio {
+		compatible = "st,stmpe-gpio";
+		st,norequest-mask = <0x20>;	//gpio 5 can't be used
+	};
diff --git a/Documentation/devicetree/bindings/gpio/gpio.txt b/Documentation/devicetree/bindings/gpio/gpio.txt
index 4e16ba4..a336287 100644
--- a/Documentation/devicetree/bindings/gpio/gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio.txt
@@ -75,4 +75,40 @@
 		gpio-controller;
 	};
 
+2.1) gpio-controller and pinctrl subsystem
+------------------------------------------
 
+gpio-controller on a SOC might be tightly coupled with the pinctrl
+subsystem, in the sense that the pins can be used by other functions
+together with optional gpio feature.
+
+While the pin allocation is totally managed by the pin ctrl subsystem,
+gpio (under gpiolib) is still maintained by gpio drivers. It may happen
+that different pin ranges in a SoC is managed by different gpio drivers.
+
+This makes it logical to let gpio drivers announce their pin ranges to
+the pin ctrl subsystem and call 'pinctrl_request_gpio' in order to
+request the corresponding pin before any gpio usage.
+
+For this, the gpio controller can use a pinctrl phandle and pins to
+announce the pinrange to the pin ctrl subsystem. For example,
+
+	qe_pio_e: gpio-controller@1460 {
+		#gpio-cells = <2>;
+		compatible = "fsl,qe-pario-bank-e", "fsl,qe-pario-bank";
+		reg = <0x1460 0x18>;
+		gpio-controller;
+		gpio-ranges = <&pinctrl1 20 10>, <&pinctrl2 50 20>;
+
+    }
+
+where,
+   &pinctrl1 and &pinctrl2 is the phandle to the pinctrl DT node.
+
+   Next values specify the base pin and number of pins for the range
+   handled by 'qe_pio_e' gpio. In the given example from base pin 20 to
+   pin 29 under pinctrl1 and pin 50 to pin 69 under pinctrl2 is handled
+   by this gpio controller.
+
+The pinctrl node must have "#gpio-range-cells" property to show number of
+arguments to pass with phandle from gpio controllers node.
diff --git a/Documentation/devicetree/bindings/gpio/gpio_atmel.txt b/Documentation/devicetree/bindings/gpio/gpio_atmel.txt
index 66efc80..85f8c0d 100644
--- a/Documentation/devicetree/bindings/gpio/gpio_atmel.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio_atmel.txt
@@ -9,6 +9,10 @@
   unused).
 - gpio-controller: Marks the device node as a GPIO controller.
 
+optional properties:
+- #gpio-lines: Number of gpio if absent 32.
+
+
 Example:
 	pioA: gpio@fffff200 {
 		compatible = "atmel,at91rm9200-gpio";
@@ -16,5 +20,6 @@
 		interrupts = <2 4>;
 		#gpio-cells = <2>;
 		gpio-controller;
+		#gpio-lines = <19>;
 	};
 
diff --git a/Documentation/devicetree/bindings/gpio/spear_spics.txt b/Documentation/devicetree/bindings/gpio/spear_spics.txt
new file mode 100644
index 0000000..96c37eb
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/spear_spics.txt
@@ -0,0 +1,50 @@
+=== ST Microelectronics SPEAr SPI CS Driver ===
+
+SPEAr platform provides a provision to control chipselects of ARM PL022 Prime
+Cell spi controller through its system registers, which otherwise remains under
+PL022 control. If chipselect remain under PL022 control then they would be
+released as soon as transfer is over and TxFIFO becomes empty. This is not
+desired by some of the device protocols above spi which expect (multiple)
+transfers without releasing their chipselects.
+
+Chipselects can be controlled by software by turning them as GPIOs. SPEAr
+provides another interface through system registers through which software can
+directly control each PL022 chipselect. Hence, it is natural for SPEAr to export
+the control of this interface as gpio.
+
+Required properties:
+
+  * compatible: should be defined as "st,spear-spics-gpio"
+  * reg: mentioning address range of spics controller
+  * st-spics,peripcfg-reg: peripheral configuration register offset
+  * st-spics,sw-enable-bit: bit offset to enable sw control
+  * st-spics,cs-value-bit: bit offset to drive chipselect low or high
+  * st-spics,cs-enable-mask: chip select number bit mask
+  * st-spics,cs-enable-shift: chip select number program offset
+  * gpio-controller: Marks the device node as gpio controller
+  * #gpio-cells: should be 1 and will mention chip select number
+
+All the above bit offsets are within peripcfg register.
+
+Example:
+-------
+spics: spics@e0700000{
+        compatible = "st,spear-spics-gpio";
+        reg = <0xe0700000 0x1000>;
+        st-spics,peripcfg-reg = <0x3b0>;
+        st-spics,sw-enable-bit = <12>;
+        st-spics,cs-value-bit = <11>;
+        st-spics,cs-enable-mask = <3>;
+        st-spics,cs-enable-shift = <8>;
+        gpio-controller;
+        #gpio-cells = <2>;
+};
+
+
+spi0: spi@e0100000 {
+        status = "okay";
+        num-cs = <3>;
+        cs-gpios = <&gpio1 7 0>, <&spics 0>,
+                   <&spics 1>;
+	...
+}
diff --git a/Documentation/devicetree/bindings/i2c/atmel-i2c.txt b/Documentation/devicetree/bindings/i2c/i2c-at91.txt
similarity index 100%
rename from Documentation/devicetree/bindings/i2c/atmel-i2c.txt
rename to Documentation/devicetree/bindings/i2c/i2c-at91.txt
diff --git a/Documentation/devicetree/bindings/i2c/davinci.txt b/Documentation/devicetree/bindings/i2c/i2c-davinci.txt
similarity index 100%
rename from Documentation/devicetree/bindings/i2c/davinci.txt
rename to Documentation/devicetree/bindings/i2c/i2c-davinci.txt
diff --git a/Documentation/devicetree/bindings/i2c/gpio-i2c.txt b/Documentation/devicetree/bindings/i2c/i2c-gpio.txt
similarity index 100%
rename from Documentation/devicetree/bindings/i2c/gpio-i2c.txt
rename to Documentation/devicetree/bindings/i2c/i2c-gpio.txt
diff --git a/Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt b/Documentation/devicetree/bindings/i2c/i2c-imx.txt
similarity index 100%
rename from Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt
rename to Documentation/devicetree/bindings/i2c/i2c-imx.txt
diff --git a/Documentation/devicetree/bindings/i2c/fsl-i2c.txt b/Documentation/devicetree/bindings/i2c/i2c-mpc.txt
similarity index 100%
rename from Documentation/devicetree/bindings/i2c/fsl-i2c.txt
rename to Documentation/devicetree/bindings/i2c/i2c-mpc.txt
diff --git a/Documentation/devicetree/bindings/i2c/mux.txt b/Documentation/devicetree/bindings/i2c/i2c-mux.txt
similarity index 100%
rename from Documentation/devicetree/bindings/i2c/mux.txt
rename to Documentation/devicetree/bindings/i2c/i2c-mux.txt
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt b/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt
new file mode 100644
index 0000000..f46d928
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt
@@ -0,0 +1,18 @@
+
+* Marvell MV64XXX I2C controller
+
+Required properties :
+
+ - reg             : Offset and length of the register set for the device
+ - compatible      : Should be "marvell,mv64xxx-i2c"
+ - interrupts      : The interrupt number
+ - clock-frequency : Desired I2C bus clock frequency in Hz.
+
+Examples:
+
+	i2c@11000 {
+		compatible = "marvell,mv64xxx-i2c";
+		reg = <0x11000 0x20>;
+		interrupts = <29>;
+		clock-frequency = <100000>;
+	};
diff --git a/Documentation/devicetree/bindings/i2c/nomadik.txt b/Documentation/devicetree/bindings/i2c/i2c-nomadik.txt
similarity index 100%
rename from Documentation/devicetree/bindings/i2c/nomadik.txt
rename to Documentation/devicetree/bindings/i2c/i2c-nomadik.txt
diff --git a/Documentation/devicetree/bindings/i2c/cavium-i2c.txt b/Documentation/devicetree/bindings/i2c/i2c-octeon.txt
similarity index 100%
rename from Documentation/devicetree/bindings/i2c/cavium-i2c.txt
rename to Documentation/devicetree/bindings/i2c/i2c-octeon.txt
diff --git a/Documentation/devicetree/bindings/i2c/omap-i2c.txt b/Documentation/devicetree/bindings/i2c/i2c-omap.txt
similarity index 100%
rename from Documentation/devicetree/bindings/i2c/omap-i2c.txt
rename to Documentation/devicetree/bindings/i2c/i2c-omap.txt
diff --git a/Documentation/devicetree/bindings/i2c/pnx.txt b/Documentation/devicetree/bindings/i2c/i2c-pnx.txt
similarity index 100%
rename from Documentation/devicetree/bindings/i2c/pnx.txt
rename to Documentation/devicetree/bindings/i2c/i2c-pnx.txt
diff --git a/Documentation/devicetree/bindings/i2c/ce4100-i2c.txt b/Documentation/devicetree/bindings/i2c/i2c-pxa-pci-ce4100.txt
similarity index 100%
rename from Documentation/devicetree/bindings/i2c/ce4100-i2c.txt
rename to Documentation/devicetree/bindings/i2c/i2c-pxa-pci-ce4100.txt
diff --git a/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt b/Documentation/devicetree/bindings/i2c/i2c-pxa.txt
similarity index 70%
rename from Documentation/devicetree/bindings/i2c/mrvl-i2c.txt
rename to Documentation/devicetree/bindings/i2c/i2c-pxa.txt
index 0f79450..12b78ac 100644
--- a/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-pxa.txt
@@ -31,21 +31,3 @@
 		reg = <0xd4025000 0x1000>;
 		interrupts = <58>;
 	};
-
-* Marvell MV64XXX I2C controller
-
-Required properties :
-
- - reg             : Offset and length of the register set for the device
- - compatible      : Should be "marvell,mv64xxx-i2c"
- - interrupts      : The interrupt number
- - clock-frequency : Desired I2C bus clock frequency in Hz.
-
-Examples:
-
-	i2c@11000 {
-		compatible = "marvell,mv64xxx-i2c";
-		reg = <0x11000 0x20>;
-		interrupts = <29>;
-		clock-frequency = <100000>;
-	};
diff --git a/Documentation/devicetree/bindings/i2c/samsung-i2c.txt b/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt
similarity index 100%
rename from Documentation/devicetree/bindings/i2c/samsung-i2c.txt
rename to Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt
diff --git a/Documentation/devicetree/bindings/i2c/sirf-i2c.txt b/Documentation/devicetree/bindings/i2c/i2c-sirf.txt
similarity index 100%
rename from Documentation/devicetree/bindings/i2c/sirf-i2c.txt
rename to Documentation/devicetree/bindings/i2c/i2c-sirf.txt
diff --git a/Documentation/devicetree/bindings/i2c/arm-versatile.txt b/Documentation/devicetree/bindings/i2c/i2c-versatile.txt
similarity index 100%
rename from Documentation/devicetree/bindings/i2c/arm-versatile.txt
rename to Documentation/devicetree/bindings/i2c/i2c-versatile.txt
diff --git a/Documentation/devicetree/bindings/i2c/xiic.txt b/Documentation/devicetree/bindings/i2c/i2c-xiic.txt
similarity index 100%
rename from Documentation/devicetree/bindings/i2c/xiic.txt
rename to Documentation/devicetree/bindings/i2c/i2c-xiic.txt
diff --git a/Documentation/devicetree/bindings/leds/common.txt b/Documentation/devicetree/bindings/leds/common.txt
new file mode 100644
index 0000000..2d88816
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/common.txt
@@ -0,0 +1,23 @@
+Common leds properties.
+
+Optional properties for child nodes:
+- label : The label for this LED.  If omitted, the label is
+  taken from the node name (excluding the unit address).
+
+- linux,default-trigger :  This parameter, if present, is a
+    string defining the trigger assigned to the LED.  Current triggers are:
+     "backlight" - LED will act as a back-light, controlled by the framebuffer
+		   system
+     "default-on" - LED will turn on (but for leds-gpio see "default-state"
+		    property in Documentation/devicetree/bindings/gpio/led.txt)
+     "heartbeat" - LED "double" flashes at a load average based rate
+     "ide-disk" - LED indicates disk activity
+     "timer" - LED flashes at a fixed, configurable rate
+
+Examples:
+
+system-status {
+	label = "Status";
+	linux,default-trigger = "heartbeat";
+	...
+};
diff --git a/Documentation/devicetree/bindings/gpio/led.txt b/Documentation/devicetree/bindings/leds/leds-gpio.txt
similarity index 68%
rename from Documentation/devicetree/bindings/gpio/led.txt
rename to Documentation/devicetree/bindings/leds/leds-gpio.txt
index edc83c1..df1b308 100644
--- a/Documentation/devicetree/bindings/gpio/led.txt
+++ b/Documentation/devicetree/bindings/leds/leds-gpio.txt
@@ -10,16 +10,10 @@
 - gpios :  Should specify the LED's GPIO, see "gpios property" in
   Documentation/devicetree/bindings/gpio/gpio.txt.  Active low LEDs should be
   indicated using flags in the GPIO specifier.
-- label :  (optional) The label for this LED.  If omitted, the label is
-  taken from the node name (excluding the unit address).
-- linux,default-trigger :  (optional) This parameter, if present, is a
-  string defining the trigger assigned to the LED.  Current triggers are:
-    "backlight" - LED will act as a back-light, controlled by the framebuffer
-		  system
-    "default-on" - LED will turn on, but see "default-state" below
-    "heartbeat" - LED "double" flashes at a load average based rate
-    "ide-disk" - LED indicates disk activity
-    "timer" - LED flashes at a fixed, configurable rate
+- label :  (optional)
+  see Documentation/devicetree/bindings/leds/common.txt
+- linux,default-trigger :  (optional)
+  see Documentation/devicetree/bindings/leds/common.txt
 - default-state:  (optional) The initial state of the LED.  Valid
   values are "on", "off", and "keep".  If the LED is already on or off
   and the default-state property is set the to same value, then no
diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt
index 8e2e0ba..a591c67 100644
--- a/Documentation/devicetree/bindings/mmc/mmc.txt
+++ b/Documentation/devicetree/bindings/mmc/mmc.txt
@@ -21,6 +21,12 @@
 - cd-inverted: when present, polarity on the cd gpio line is inverted
 - wp-inverted: when present, polarity on the wp gpio line is inverted
 - max-frequency: maximum operating clock frequency
+- no-1-8-v: when present, denotes that 1.8v card voltage is not supported on
+  this system, even if the controller claims it is.
+
+Optional SDIO properties:
+- keep-power-in-suspend: Preserves card power during a suspend/resume cycle
+- enable-sdio-wakeup: Enables wake up of host system on SDIO IRQ assertion
 
 Example:
 
@@ -33,4 +39,6 @@
 	cd-inverted;
 	wp-gpios = <&gpio 70 0>;
 	max-frequency = <50000000>;
+	keep-power-in-suspend;
+	enable-sdio-wakeup;
 }
diff --git a/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt b/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt
index 630a7d7..97e9e31 100644
--- a/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt
+++ b/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt
@@ -12,10 +12,6 @@
 [A] The property "samsung,cd-pinmux-gpio" can be used as stated in the
     "Optional Board Specific Properties" section below.
 
-[B] If core card-detect bindings and "samsung,cd-pinmux-gpio" property
-    is not specified, it is assumed that there is no card detection
-    mechanism used.
-
 Required SoC Specific Properties:
 - compatible: should be one of the following
   - "samsung,s3c6410-sdhci": For controllers compatible with s3c6410 sdhci
@@ -24,14 +20,18 @@
     controller.
 
 Required Board Specific Properties:
-- gpios: Should specify the gpios used for clock, command and data lines. The
-  gpio specifier format depends on the gpio controller.
+- Samsung GPIO variant (will be completely replaced by pinctrl):
+  - gpios: Should specify the gpios used for clock, command and data lines. The
+    gpio specifier format depends on the gpio controller.
+- Pinctrl variant (preferred if available):
+  - pinctrl-0: Should specify pin control groups used for this controller.
+  - pinctrl-names: Should contain only one value - "default".
 
 Optional Board Specific Properties:
 - samsung,cd-pinmux-gpio: Specifies the card detect line that is routed
   through a pinmux to the card-detect pin of the card slot. This property
   should be used only if none of the mmc core card-detect properties are
-  used.
+  used. Only for Samsung GPIO variant.
 
 Example:
 	sdhci@12530000 {
@@ -40,12 +40,18 @@
 		interrupts = <0 75 0>;
 		bus-width = <4>;
 		cd-gpios = <&gpk2 2 2 3 3>;
+
+		/* Samsung GPIO variant */
 		gpios = <&gpk2 0 2 0 3>,  /* clock line */
 			<&gpk2 1 2 0 3>,  /* command line */
 			<&gpk2 3 2 3 3>,  /* data line 0 */
 			<&gpk2 4 2 3 3>,  /* data line 1 */
 			<&gpk2 5 2 3 3>,  /* data line 2 */
 			<&gpk2 6 2 3 3>;  /* data line 3 */
+
+		/* Pinctrl variant */
+		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4>;
+		pinctrl-names = "default";
 	};
 
 	Note: This example shows both SoC specific and board specific properties
diff --git a/Documentation/devicetree/bindings/mmc/synposis-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synopsis-dw-mshc.txt
similarity index 100%
rename from Documentation/devicetree/bindings/mmc/synposis-dw-mshc.txt
rename to Documentation/devicetree/bindings/mmc/synopsis-dw-mshc.txt
diff --git a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
index be76a23..ed271fc 100644
--- a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
+++ b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
@@ -19,6 +19,7 @@
 "supply-name" examples are "vmmc", "vmmc_aux" etc
 ti,non-removable: non-removable slot (like eMMC)
 ti,needs-special-reset: Requires a special softreset sequence
+ti,needs-special-hs-handling: HSMMC IP needs special setting for handling High Speed
 
 Example:
 	mmc1: mmc@0x4809c000 {
diff --git a/Documentation/devicetree/bindings/mmc/vt8500-sdmmc.txt b/Documentation/devicetree/bindings/mmc/vt8500-sdmmc.txt
new file mode 100644
index 0000000..d7fb6ab
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/vt8500-sdmmc.txt
@@ -0,0 +1,23 @@
+* Wondermedia WM8505/WM8650 SD/MMC Host Controller
+
+This file documents differences between the core properties described
+by mmc.txt and the properties used by the wmt-sdmmc driver.
+
+Required properties:
+- compatible: Should be "wm,wm8505-sdhc".
+- interrupts: Two interrupts are required - regular irq and dma irq.
+
+Optional properties:
+- sdon-inverted: SD_ON bit is inverted on the controller
+
+Examples:
+
+sdhc@d800a000 {
+	compatible = "wm,wm8505-sdhc";
+	reg = <0xd800a000 0x1000>;
+	interrupts = <20 21>;
+	clocks = <&sdhc>;
+	bus-width = <4>;
+	sdon-inverted;
+};
+
diff --git a/Documentation/devicetree/bindings/net/mdio-gpio.txt b/Documentation/devicetree/bindings/net/mdio-gpio.txt
index bc954952..c79bab0 100644
--- a/Documentation/devicetree/bindings/net/mdio-gpio.txt
+++ b/Documentation/devicetree/bindings/net/mdio-gpio.txt
@@ -8,9 +8,16 @@
 
 MDC, MDIO.
 
+Note: Each gpio-mdio bus should have an alias correctly numbered in "aliases"
+node.
+
 Example:
 
-mdio {
+aliases {
+	mdio-gpio0 = <&mdio0>;
+};
+
+mdio0: mdio {
 	compatible = "virtual,mdio-gpio";
 	#address-cells = <1>;
 	#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
new file mode 100644
index 0000000..3a26812
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
@@ -0,0 +1,141 @@
+* Atmel AT91 Pinmux Controller
+
+The AT91 Pinmux Controler, enables the IC
+to share one PAD to several functional blocks. The sharing is done by
+multiplexing the PAD input/output signals. For each PAD there are up to
+8 muxing options (called periph modes). Since different modules require
+different PAD settings (like pull up, keeper, etc) the contoller controls
+also the PAD settings parameters.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+Atmel AT91 pin configuration node is a node of a group of pins which can be
+used for a specific device or function. This node represents both mux and config
+of the pins in that group. The 'pins' selects the function mode(also named pin
+mode) this pin can work on and the 'config' configures various pad settings
+such as pull-up, multi drive, etc.
+
+Required properties for iomux controller:
+- compatible: "atmel,at91rm9200-pinctrl"
+- atmel,mux-mask: array of mask (periph per bank) to describe if a pin can be
+  configured in this periph mode. All the periph and bank need to be describe.
+
+How to create such array:
+
+Each column will represent the possible peripheral of the pinctrl
+Each line will represent a pio bank
+
+Take an example on the 9260
+Peripheral: 2 ( A and B)
+Bank: 3 (A, B and C)
+=>
+
+  /*    A         B     */
+  0xffffffff 0xffc00c3b  /* pioA */
+  0xffffffff 0x7fff3ccf  /* pioB */
+  0xffffffff 0x007fffff  /* pioC */
+
+For each peripheral/bank we will descibe in a u32 if a pin can can be
+configured in it by putting 1 to the pin bit (1 << pin)
+
+Let's take the pioA on peripheral B
+From the datasheet Table 10-2.
+Peripheral B
+PA0	MCDB0
+PA1	MCCDB
+PA2
+PA3	MCDB3
+PA4	MCDB2
+PA5	MCDB1
+PA6
+PA7
+PA8
+PA9
+PA10	ETX2
+PA11	ETX3
+PA12
+PA13
+PA14
+PA15
+PA16
+PA17
+PA18
+PA19
+PA20
+PA21
+PA22	ETXER
+PA23	ETX2
+PA24	ETX3
+PA25	ERX2
+PA26	ERX3
+PA27	ERXCK
+PA28	ECRS
+PA29	ECOL
+PA30	RXD4
+PA31	TXD4
+
+=> 0xffc00c3b
+
+Required properties for pin configuration node:
+- atmel,pins: 4 integers array, represents a group of pins mux and config
+  setting. The format is atmel,pins = <PIN_BANK PIN_BANK_NUM PERIPH CONFIG>.
+  The PERIPH 0 means gpio.
+
+Bits used for CONFIG:
+PULL_UP		(1 << 0): indicate this pin need a pull up.
+MULTIDRIVE	(1 << 1): indicate this pin need to be configured as multidrive.
+DEGLITCH	(1 << 2): indicate this pin need deglitch.
+PULL_DOWN	(1 << 3): indicate this pin need a pull down.
+DIS_SCHMIT	(1 << 4): indicate this pin need to disable schmit trigger.
+DEBOUNCE	(1 << 16): indicate this pin need debounce.
+DEBOUNCE_VAL	(0x3fff << 17): debounce val.
+
+NOTE:
+Some requirements for using atmel,at91rm9200-pinctrl binding:
+1. We have pin function node defined under at91 controller node to represent
+   what pinmux functions this SoC supports.
+2. The driver can use the function node's name and pin configuration node's
+   name describe the pin function and group hierarchy.
+   For example, Linux at91 pinctrl driver takes the function node's name
+   as the function name and pin configuration node's name as group name to
+   create the map table.
+3. Each pin configuration node should have a phandle, devices can set pins
+   configurations by referring to the phandle of that pin configuration node.
+4. The gpio controller must be describe in the pinctrl simple-bus.
+
+Examples:
+
+pinctrl@fffff400 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+	compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+	reg = <0xfffff400 0x600>;
+
+	atmel,mux-mask = <
+	      /*    A         B     */
+	       0xffffffff 0xffc00c3b  /* pioA */
+	       0xffffffff 0x7fff3ccf  /* pioB */
+	       0xffffffff 0x007fffff  /* pioC */
+	      >;
+
+	/* shared pinctrl settings */
+	dbgu {
+		pinctrl_dbgu: dbgu-0 {
+			atmel,pins =
+				<1 14 0x1 0x0	/* PB14 periph A */
+				 1 15 0x1 0x1>;	/* PB15 periph with pullup */
+		};
+	};
+};
+
+dbgu: serial@fffff200 {
+	compatible = "atmel,at91sam9260-usart";
+	reg = <0xfffff200 0x200>;
+	interrupts = <1 4 7>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_dbgu>;
+	status = "disabled";
+};
diff --git a/Documentation/devicetree/bindings/rtc/orion-rtc.txt b/Documentation/devicetree/bindings/rtc/orion-rtc.txt
new file mode 100644
index 0000000..3bf63ff
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/orion-rtc.txt
@@ -0,0 +1,18 @@
+* Mvebu Real Time Clock
+
+RTC controller for the Kirkwood, the Dove, the Armada 370 and the
+Armada XP SoCs
+
+Required properties:
+- compatible : Should be "marvell,orion-rtc"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- interrupts: IRQ line for the RTC.
+
+Example:
+
+rtc@10300 {
+        compatible = "marvell,orion-rtc";
+        reg = <0xd0010300 0x20>;
+        interrupts = <50>;
+};
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 9de2b9f..770a019 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -5,6 +5,7 @@
 
 ad	Avionic Design GmbH
 adi	Analog Devices, Inc.
+ak	Asahi Kasei Corp.
 amcc	Applied Micro Circuits Corporation (APM, formally AMCC)
 apm	Applied Micro Circuits Corporation (APM)
 arm	ARM Ltd.
@@ -25,6 +26,7 @@
 hp	Hewlett Packard
 ibm	International Business Machines (IBM)
 idt	Integrated Device Technologies, Inc.
+img	Imagination Technologies Ltd.
 intercontrol	Inter Control Group
 linux	Linux-specific binding
 marvell	Marvell Technology Group Ltd.
@@ -34,8 +36,9 @@
 nintendo	Nintendo
 nvidia	NVIDIA
 nxp	NXP Semiconductors
+onnn	ON Semiconductor Corp.
 picochip	Picochip Ltd
-powervr	Imagination Technologies
+powervr	PowerVR (deprecated, use img)
 qcom	Qualcomm, Inc.
 ramtron	Ramtron International
 realtek Realtek Semiconductor Corp.
@@ -45,6 +48,7 @@
 sil	Silicon Image
 simtek
 sirf	SiRF Technology, Inc.
+snps 	Synopsys, Inc.
 st	STMicroelectronics
 stericsson	ST-Ericsson
 ti	Texas Instruments
diff --git a/Documentation/devicetree/usage-model.txt b/Documentation/devicetree/usage-model.txt
index dca90fe..ef9d06c 100644
--- a/Documentation/devicetree/usage-model.txt
+++ b/Documentation/devicetree/usage-model.txt
@@ -347,7 +347,7 @@
 tree.  Therefore, if a DT node is at the root of the tree, then it
 really probably is best registered as a platform_device.
 
-Linux board support code calls of_platform_populate(NULL, NULL, NULL)
+Linux board support code calls of_platform_populate(NULL, NULL, NULL, NULL)
 to kick off discovery of devices at the root of the tree.  The
 parameters are all NULL because when starting from the root of the
 tree, there is no need to provide a starting node (the first NULL), a
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index a1793d6..3844d21 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -33,7 +33,7 @@
   2	Modifying System Parameters
 
   3	Per-Process Parameters
-  3.1	/proc/<pid>/oom_score_adj - Adjust the oom-killer
+  3.1	/proc/<pid>/oom_adj & /proc/<pid>/oom_score_adj - Adjust the oom-killer
 								score
   3.2	/proc/<pid>/oom_score - Display current oom-killer score
   3.3	/proc/<pid>/io - Display the IO accounting fields
@@ -1320,10 +1320,10 @@
 CHAPTER 3: PER-PROCESS PARAMETERS
 ------------------------------------------------------------------------------
 
-3.1 /proc/<pid>/oom_score_adj- Adjust the oom-killer score
+3.1 /proc/<pid>/oom_adj & /proc/<pid>/oom_score_adj- Adjust the oom-killer score
 --------------------------------------------------------------------------------
 
-This file can be used to adjust the badness heuristic used to select which
+These file can be used to adjust the badness heuristic used to select which
 process gets killed in out of memory conditions.
 
 The badness heuristic assigns a value to each candidate task ranging from 0
@@ -1361,6 +1361,12 @@
 equivalent to discounting 50% of the task's allowed memory from being considered
 as scoring against the task.
 
+For backwards compatibility with previous kernels, /proc/<pid>/oom_adj may also
+be used to tune the badness score.  Its acceptable values range from -16
+(OOM_ADJUST_MIN) to +15 (OOM_ADJUST_MAX) and a special value of -17
+(OOM_DISABLE) to disable oom killing entirely for that task.  Its value is
+scaled linearly with /proc/<pid>/oom_score_adj.
+
 The value of /proc/<pid>/oom_score_adj may be reduced no lower than the last
 value set by a CAP_SYS_RESOURCE process. To reduce the value any lower
 requires CAP_SYS_RESOURCE.
@@ -1375,7 +1381,9 @@
 -------------------------------------------------------------
 
 This file can be used to check the current score used by the oom-killer is for
-any given <pid>.
+any given <pid>. Use it together with /proc/<pid>/oom_score_adj to tune which
+process should be killed in an out-of-memory situation.
+
 
 3.3  /proc/<pid>/io - Display the IO accounting fields
 -------------------------------------------------------
diff --git a/Documentation/gpio.txt b/Documentation/gpio.txt
index e08a883..77a1d11 100644
--- a/Documentation/gpio.txt
+++ b/Documentation/gpio.txt
@@ -439,6 +439,48 @@
 signaling rate accordingly.
 
 
+GPIO controllers and the pinctrl subsystem
+------------------------------------------
+
+A GPIO controller on a SOC might be tightly coupled with the pinctrl
+subsystem, in the sense that the pins can be used by other functions
+together with an optional gpio feature. We have already covered the
+case where e.g. a GPIO controller need to reserve a pin or set the
+direction of a pin by calling any of:
+
+pinctrl_request_gpio()
+pinctrl_free_gpio()
+pinctrl_gpio_direction_input()
+pinctrl_gpio_direction_output()
+
+But how does the pin control subsystem cross-correlate the GPIO
+numbers (which are a global business) to a certain pin on a certain
+pin controller?
+
+This is done by registering "ranges" of pins, which are essentially
+cross-reference tables. These are described in
+Documentation/pinctrl.txt
+
+While the pin allocation is totally managed by the pinctrl subsystem,
+gpio (under gpiolib) is still maintained by gpio drivers. It may happen
+that different pin ranges in a SoC is managed by different gpio drivers.
+
+This makes it logical to let gpio drivers announce their pin ranges to
+the pin ctrl subsystem before it will call 'pinctrl_request_gpio' in order
+to request the corresponding pin to be prepared by the pinctrl subsystem
+before any gpio usage.
+
+For this, the gpio controller can register its pin range with pinctrl
+subsystem. There are two ways of doing it currently: with or without DT.
+
+For with DT support refer to Documentation/devicetree/bindings/gpio/gpio.txt.
+
+For non-DT support, user can call gpiochip_add_pin_range() with appropriate
+parameters to register a range of gpio pins with a pinctrl driver. For this
+exact name string of pinctrl device has to be passed as one of the
+argument to this routine.
+
+
 What do these conventions omit?
 ===============================
 One of the biggest things these conventions omit is pin multiplexing, since
diff --git a/Documentation/hwmon/ads7828 b/Documentation/hwmon/ads7828
index 2bbebe6..f6e263e 100644
--- a/Documentation/hwmon/ads7828
+++ b/Documentation/hwmon/ads7828
@@ -4,29 +4,47 @@
 Supported chips:
   * Texas Instruments/Burr-Brown ADS7828
     Prefix: 'ads7828'
-    Addresses scanned: I2C 0x48, 0x49, 0x4a, 0x4b
-    Datasheet: Publicly available at the Texas Instruments website :
+    Datasheet: Publicly available at the Texas Instruments website:
                http://focus.ti.com/lit/ds/symlink/ads7828.pdf
 
+  * Texas Instruments ADS7830
+    Prefix: 'ads7830'
+    Datasheet: Publicly available at the Texas Instruments website:
+               http://focus.ti.com/lit/ds/symlink/ads7830.pdf
+
 Authors:
         Steve Hardy <shardy@redhat.com>
+        Vivien Didelot <vivien.didelot@savoirfairelinux.com>
+        Guillaume Roguez <guillaume.roguez@savoirfairelinux.com>
 
-Module Parameters
------------------
+Platform data
+-------------
 
-* se_input: bool (default Y)
-  Single ended operation - set to N for differential mode
-* int_vref: bool (default Y)
-  Operate with the internal 2.5V reference - set to N for external reference
-* vref_mv: int (default 2500)
-  If using an external reference, set this to the reference voltage in mV
+The ads7828 driver accepts an optional ads7828_platform_data structure (defined
+in include/linux/platform_data/ads7828.h). The structure fields are:
+
+* diff_input: (bool) Differential operation
+  set to true for differential mode, false for default single ended mode.
+
+* ext_vref: (bool) External reference
+  set to true if it operates with an external reference, false for default
+  internal reference.
+
+* vref_mv: (unsigned int) Voltage reference
+  if using an external reference, set this to the reference voltage in mV,
+  otherwise it will default to the internal value (2500mV). This value will be
+  bounded with limits accepted by the chip, described in the datasheet.
+
+ If no structure is provided, the configuration defaults to single ended
+ operation and internal voltage reference (2.5V).
 
 Description
 -----------
 
-This driver implements support for the Texas Instruments ADS7828.
+This driver implements support for the Texas Instruments ADS7828 and ADS7830.
 
-This device is a 12-bit 8-channel A-D converter.
+The ADS7828 device is a 12-bit 8-channel A/D converter, while the ADS7830 does
+8-bit sampling.
 
 It can operate in single ended mode (8 +ve inputs) or in differential mode,
 where 4 differential pairs can be measured.
@@ -34,3 +52,7 @@
 The chip also has the facility to use an external voltage reference.  This
 may be required if your hardware supplies the ADS7828 from a 5V supply, see
 the datasheet for more details.
+
+There is no reliable way to identify this chip, so the driver will not scan
+some addresses to try to auto-detect it. That means that you will have to
+statically declare the device in the platform support code.
diff --git a/Documentation/hwmon/coretemp b/Documentation/hwmon/coretemp
index f17256f..3374c08 100644
--- a/Documentation/hwmon/coretemp
+++ b/Documentation/hwmon/coretemp
@@ -98,8 +98,10 @@
 
 45nm		Atom Processors
 		D525/510/425/410				100
+		Z670/650					90
 		Z560/550/540/530P/530/520PT/520/515/510PT/510P	90
 		Z510/500					90
+		N570/550					100
 		N475/470/455/450				100
 		N280/270					90
 		330/230						125
diff --git a/Documentation/hwmon/da9055 b/Documentation/hwmon/da9055
new file mode 100644
index 0000000..855c3f5
--- /dev/null
+++ b/Documentation/hwmon/da9055
@@ -0,0 +1,47 @@
+Supported chips:
+  * Dialog Semiconductors DA9055 PMIC
+    Prefix: 'da9055'
+    Datasheet: Datasheet is not publicly available.
+
+Authors: David Dajun Chen <dchen@diasemi.com>
+
+Description
+-----------
+
+The DA9055 provides an Analogue to Digital Converter (ADC) with 10 bits
+resolution and track and hold circuitry combined with an analogue input
+multiplexer. The analogue input multiplexer will allow conversion of up to 5
+different inputs. The track and hold circuit ensures stable input voltages at
+the input of the ADC during the conversion.
+
+The ADC is used to measure the following inputs:
+Channel 0: VDDOUT - measurement of the system voltage
+Channel 1: ADC_IN1 - high impedance input (0 - 2.5V)
+Channel 2: ADC_IN2 - high impedance input (0 - 2.5V)
+Channel 3: ADC_IN3 - high impedance input (0 - 2.5V)
+Channel 4: Internal Tjunc. - sense (internal temp. sensor)
+
+By using sysfs attributes we can measure the system voltage VDDOUT,
+chip junction temperature and auxiliary channels voltages.
+
+Voltage Monitoring
+------------------
+
+Voltages are sampled in a AUTO mode it can be manually sampled too and results
+are stored in a 10 bit ADC.
+
+The system voltage is calculated as:
+	Milli volt = ((ADC value * 1000) / 85) + 2500
+
+The voltages on ADC channels 1, 2 and 3 are calculated as:
+	Milli volt = (ADC value * 1000) / 102
+
+Temperature Monitoring
+----------------------
+
+Temperatures are sampled by a 10 bit ADC.  Junction temperatures
+are monitored by the ADC channels.
+
+The junction temperature is calculated:
+	Degrees celsius = -0.4084 * (ADC_RES - T_OFFSET) + 307.6332
+The junction temperature attribute is supported by the driver.
diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt
index ec9ae67..14c3f4f 100644
--- a/Documentation/kbuild/makefiles.txt
+++ b/Documentation/kbuild/makefiles.txt
@@ -1175,15 +1175,16 @@
 	in an init section in the image. Platform code *must* copy the
 	blob to non-init memory prior to calling unflatten_device_tree().
 
+	To use this command, simply add *.dtb into obj-y or targets, or make
+	some other target depend on %.dtb
+
+	A central rule exists to create $(obj)/%.dtb from $(src)/%.dts;
+	architecture Makefiles do no need to explicitly write out that rule.
+
 	Example:
-		#arch/x86/platform/ce4100/Makefile
-		clean-files := *dtb.S
-
-		DTC_FLAGS := -p 1024
-		obj-y += foo.dtb.o
-
-		$(obj)/%.dtb: $(src)/%.dts
-			$(call cmd,dtc)
+		targets += $(dtb-y)
+		clean-files += *.dtb
+		DTC_FLAGS ?= -p 1024
 
 --- 6.8 Custom kbuild commands
 
diff --git a/Documentation/mmc/mmc-dev-attrs.txt b/Documentation/mmc/mmc-dev-attrs.txt
index 22ae844..0d98fac 100644
--- a/Documentation/mmc/mmc-dev-attrs.txt
+++ b/Documentation/mmc/mmc-dev-attrs.txt
@@ -25,6 +25,8 @@
 	serial			Product Serial Number (from CID Register)
 	erase_size		Erase group size
 	preferred_erase_size	Preferred erase size
+	raw_rpmb_size_mult	RPMB partition size
+	rel_sectors		Reliable write sector count
 
 Note on Erase Size and Preferred Erase Size:
 
@@ -65,6 +67,11 @@
 
 	"preferred_erase_size" is in bytes.
 
+Note on raw_rpmb_size_mult:
+	"raw_rpmb_size_mult" is a mutliple of 128kB block.
+	RPMB size in byte is calculated by using the following equation:
+	RPMB partition size = 128kB x raw_rpmb_size_mult
+
 SD/MMC/SDIO Clock Gating Attribute
 ==================================
 
diff --git a/Documentation/networking/netdev-features.txt b/Documentation/networking/netdev-features.txt
index 4164f5c..f310ede 100644
--- a/Documentation/networking/netdev-features.txt
+++ b/Documentation/networking/netdev-features.txt
@@ -164,4 +164,4 @@
 This requests that the NIC receive all possible frames, including errored
 frames (such as bad FCS, etc).  This can be helpful when sniffing a link with
 bad packets on it.  Some NICs may receive more packets if also put into normal
-PROMISC mdoe.
+PROMISC mode.
diff --git a/Documentation/networking/vxlan.txt b/Documentation/networking/vxlan.txt
index 5b34b76..6d99351 100644
--- a/Documentation/networking/vxlan.txt
+++ b/Documentation/networking/vxlan.txt
@@ -32,7 +32,7 @@
   # ip link delete vxlan0
 
 3. Show vxlan info
-  # ip -d show vxlan0
+  # ip -d link show vxlan0
 
 It is possible to create, destroy and display the vxlan
 forwarding table using the new bridge command.
@@ -41,7 +41,7 @@
   # bridge fdb add to 00:17:42:8a:b4:05 dst 192.19.0.2 dev vxlan0
 
 2. Delete forwarding table entry
-  # bridge fdb delete 00:17:42:8a:b4:05
+  # bridge fdb delete 00:17:42:8a:b4:05 dev vxlan0
 
 3. Show forwarding table
   # bridge fdb show dev vxlan0
diff --git a/Documentation/pinctrl.txt b/Documentation/pinctrl.txt
index 3b4ee53..da40efb 100644
--- a/Documentation/pinctrl.txt
+++ b/Documentation/pinctrl.txt
@@ -364,6 +364,9 @@
 the range ID value, so that the pin controller knows which range it should
 deal with.
 
+Calling pinctrl_add_gpio_range from pinctrl driver is DEPRECATED. Please see
+section 2.1 of Documentation/devicetree/bindings/gpio/gpio.txt on how to bind
+pinctrl and gpio drivers.
 
 PINMUX interfaces
 =================
@@ -1193,4 +1196,6 @@
 	...
 }
 
-The above has to be done from process context.
+The above has to be done from process context. The reservation of the pins
+will be done when the state is activated, so in effect one specific pin
+can be used by different functions at different times on a running system.
diff --git a/Documentation/power/pm_qos_interface.txt b/Documentation/power/pm_qos_interface.txt
index 17e130a..79a2a58 100644
--- a/Documentation/power/pm_qos_interface.txt
+++ b/Documentation/power/pm_qos_interface.txt
@@ -99,7 +99,7 @@
 
 From kernel mode the use of this interface is the following:
 
-int dev_pm_qos_add_request(device, handle, value):
+int dev_pm_qos_add_request(device, handle, type, value):
 Will insert an element into the list for that identified device with the
 target value.  Upon change to this list the new target is recomputed and any
 registered notifiers are called only if the target value is now different.
diff --git a/MAINTAINERS b/MAINTAINERS
index 59203e7..cf7ff78 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -526,17 +526,17 @@
 F:	arch/x86/include/asm/geode.h
 
 AMD IOMMU (AMD-VI)
-M:	Joerg Roedel <joerg.roedel@amd.com>
+M:	Joerg Roedel <joro@8bytes.org>
 L:	iommu@lists.linux-foundation.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git
-S:	Supported
+S:	Maintained
 F:	drivers/iommu/amd_iommu*.[ch]
 F:	include/linux/amd-iommu.h
 
 AMD MICROCODE UPDATE SUPPORT
-M:	Andreas Herrmann <andreas.herrmann3@amd.com>
+M:	Andreas Herrmann <herrmann.der.user@googlemail.com>
 L:	amd64-microcode@amd64.org
-S:	Supported
+S:	Maintained
 F:	arch/x86/kernel/microcode_amd.c
 
 AMS (Apple Motion Sensor) DRIVER
@@ -841,6 +841,14 @@
 F:	arch/arm/mach-sa1100/jornada720.c
 F:	arch/arm/mach-sa1100/include/mach/jornada720.h
 
+ARM/IGEP MACHINE SUPPORT
+M:	Enric Balletbo i Serra <eballetbo@gmail.com>
+M:	Javier Martinez Canillas <javier@dowhile0.org>
+L:	linux-omap@vger.kernel.org
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+F:	arch/arm/mach-omap2/board-igep0020.c
+
 ARM/INCOME PXA270 SUPPORT
 M:	Marek Vasut <marek.vasut@gmail.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -1229,6 +1237,7 @@
 F:	drivers/video/wmt_ge_rops.*
 F:	drivers/tty/serial/vt8500_serial.c
 F:	drivers/rtc/rtc-vt8500-c
+F:	drivers/mmc/host/wmt-sdmmc.c
 
 ARM/ZIPIT Z2 SUPPORT
 M:	Marek Vasut <marek.vasut@gmail.com>
@@ -1360,14 +1369,6 @@
 F:	drivers/atm/
 F:	include/linux/atm*
 
-ATMEL AT91 MCI DRIVER
-M:	Ludovic Desroches <ludovic.desroches@atmel.com>
-L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-W:	http://www.atmel.com/products/AT91/
-W:	http://www.at91.com/
-S:	Maintained
-F:	drivers/mmc/host/at91_mci.c
-
 ATMEL AT91 / AT32 MCI DRIVER
 M:	Ludovic Desroches <ludovic.desroches@atmel.com>
 S:	Maintained
@@ -1986,7 +1987,6 @@
 F:	include/linux/coda*.h
 
 COMMON CLK FRAMEWORK
-M:	Mike Turquette <mturquette@ti.com>
 M:	Mike Turquette <mturquette@linaro.org>
 L:	linux-arm-kernel@lists.infradead.org (same as CLK API & CLKDEV)
 T:	git git://git.linaro.org/people/mturquette/linux.git
@@ -2708,10 +2708,10 @@
 
 EDAC-AMD64
 M:	Doug Thompson <dougthompson@xmission.com>
-M:	Borislav Petkov <borislav.petkov@amd.com>
+M:	Borislav Petkov <bp@alien8.de>
 L:	linux-edac@vger.kernel.org
 W:	bluesmoke.sourceforge.net
-S:	Supported
+S:	Maintained
 F:	drivers/edac/amd64_edac*
 
 EDAC-E752X
@@ -3598,6 +3598,49 @@
 F:	drivers/net/hyperv/
 F:	drivers/staging/hv/
 
+I2C OVER PARALLEL PORT
+M:	Jean Delvare <khali@linux-fr.org>
+L:	linux-i2c@vger.kernel.org
+S:	Maintained
+F:	Documentation/i2c/busses/i2c-parport
+F:	Documentation/i2c/busses/i2c-parport-light
+F:	drivers/i2c/busses/i2c-parport.c
+F:	drivers/i2c/busses/i2c-parport-light.c
+
+I2C/SMBUS CONTROLLER DRIVERS FOR PC
+M:	Jean Delvare <khali@linux-fr.org>
+L:	linux-i2c@vger.kernel.org
+S:	Maintained
+F:	Documentation/i2c/busses/i2c-ali1535
+F:	Documentation/i2c/busses/i2c-ali1563
+F:	Documentation/i2c/busses/i2c-ali15x3
+F:	Documentation/i2c/busses/i2c-amd756
+F:	Documentation/i2c/busses/i2c-amd8111
+F:	Documentation/i2c/busses/i2c-i801
+F:	Documentation/i2c/busses/i2c-nforce2
+F:	Documentation/i2c/busses/i2c-piix4
+F:	Documentation/i2c/busses/i2c-sis5595
+F:	Documentation/i2c/busses/i2c-sis630
+F:	Documentation/i2c/busses/i2c-sis96x
+F:	Documentation/i2c/busses/i2c-via
+F:	Documentation/i2c/busses/i2c-viapro
+F:	drivers/i2c/busses/i2c-ali1535.c
+F:	drivers/i2c/busses/i2c-ali1563.c
+F:	drivers/i2c/busses/i2c-ali15x3.c
+F:	drivers/i2c/busses/i2c-amd756.c
+F:	drivers/i2c/busses/i2c-amd756-s4882.c
+F:	drivers/i2c/busses/i2c-amd8111.c
+F:	drivers/i2c/busses/i2c-i801.c
+F:	drivers/i2c/busses/i2c-isch.c
+F:	drivers/i2c/busses/i2c-nforce2.c
+F:	drivers/i2c/busses/i2c-nforce2-s4985.c
+F:	drivers/i2c/busses/i2c-piix4.c
+F:	drivers/i2c/busses/i2c-sis5595.c
+F:	drivers/i2c/busses/i2c-sis630.c
+F:	drivers/i2c/busses/i2c-sis96x.c
+F:	drivers/i2c/busses/i2c-via.c
+F:	drivers/i2c/busses/i2c-viapro.c
+
 I2C/SMBUS STUB DRIVER
 M:	"Mark M. Hoffman" <mhoffman@lightlink.com>
 L:	linux-i2c@vger.kernel.org
@@ -3605,9 +3648,8 @@
 F:	drivers/i2c/busses/i2c-stub.c
 
 I2C SUBSYSTEM
-M:	"Jean Delvare (PC drivers, core)" <khali@linux-fr.org>
+M:	Wolfram Sang <w.sang@pengutronix.de>
 M:	"Ben Dooks (embedded platforms)" <ben-linux@fluff.org>
-M:	"Wolfram Sang (embedded platforms)" <w.sang@pengutronix.de>
 L:	linux-i2c@vger.kernel.org
 W:	http://i2c.wiki.kernel.org/
 T:	quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-i2c/
@@ -3618,6 +3660,13 @@
 F:	include/linux/i2c.h
 F:	include/linux/i2c-*.h
 
+I2C-TAOS-EVM DRIVER
+M:	Jean Delvare <khali@linux-fr.org>
+L:	linux-i2c@vger.kernel.org
+S:	Maintained
+F:	Documentation/i2c/busses/i2c-taos-evm
+F:	drivers/i2c/busses/i2c-taos-evm.c
+
 I2C-TINY-USB DRIVER
 M:	Till Harbaum <till@harbaum.org>
 L:	linux-i2c@vger.kernel.org
@@ -3704,7 +3753,7 @@
 F:	drivers/platform/x86/ideapad-laptop.c
 
 IDE/ATAPI DRIVERS
-M:	Borislav Petkov <petkovbb@gmail.com>
+M:	Borislav Petkov <bp@alien8.de>
 L:	linux-ide@vger.kernel.org
 S:	Maintained
 F:	Documentation/cdrom/ide-cd
@@ -4231,8 +4280,8 @@
 F:	include/linux/sunrpc/
 
 KERNEL VIRTUAL MACHINE (KVM)
-M:	Avi Kivity <avi@redhat.com>
 M:	Marcelo Tosatti <mtosatti@redhat.com>
+M:	Gleb Natapov <gleb@redhat.com>
 L:	kvm@vger.kernel.org
 W:	http://kvm.qumranet.com
 S:	Supported
@@ -5364,7 +5413,7 @@
 F:	sound/drivers/opl4/
 
 OPROFILE
-M:	Robert Richter <robert.richter@amd.com>
+M:	Robert Richter <rric@kernel.org>
 L:	oprofile-list@lists.sf.net
 S:	Maintained
 F:	arch/*/include/asm/oprofile*.h
@@ -5639,6 +5688,12 @@
 F:	drivers/pinctrl/
 F:	include/linux/pinctrl/
 
+PIN CONTROLLER - ATMEL AT91
+M:	Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+F:	drivers/pinctrl/pinctrl-at91.c
+
 PIN CONTROLLER - ST SPEAR
 M:	Viresh Kumar <viresh.linux@gmail.com>
 L:	spear-devel@list.st.com
@@ -7210,6 +7265,14 @@
 S:	Maintained
 F:	arch/xtensa/
 
+THERMAL
+M:      Zhang Rui <rui.zhang@intel.com>
+L:      linux-pm@vger.kernel.org
+T:      git git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux.git
+S:      Supported
+F:      drivers/thermal/
+F:      include/linux/thermal.h
+
 THINKPAD ACPI EXTRAS DRIVER
 M:	Henrique de Moraes Holschuh <ibm-acpi@hmh.eng.br>
 L:	ibm-acpi-devel@lists.sourceforge.net
@@ -7887,13 +7950,6 @@
 S:	Maintained
 F:	drivers/net/ethernet/via/via-rhine.c
 
-VIAPRO SMBUS DRIVER
-M:	Jean Delvare <khali@linux-fr.org>
-L:	linux-i2c@vger.kernel.org
-S:	Maintained
-F:	Documentation/i2c/busses/i2c-viapro
-F:	drivers/i2c/busses/i2c-viapro.c
-
 VIA SD/MMC CARD CONTROLLER DRIVER
 M:	Bruce Chang <brucechang@via.com.tw>
 M:	Harald Welte <HaraldWelte@viatech.com>
@@ -8148,7 +8204,7 @@
 
 X86 MCE INFRASTRUCTURE
 M:	Tony Luck <tony.luck@intel.com>
-M:	Borislav Petkov <bp@amd64.org>
+M:	Borislav Petkov <bp@alien8.de>
 L:	linux-edac@vger.kernel.org
 S:	Maintained
 F:	arch/x86/kernel/cpu/mcheck/*
diff --git a/Makefile b/Makefile
index 6edac73..540f7b2 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 7
 SUBLEVEL = 0
-EXTRAVERSION = -rc5
+EXTRAVERSION =
 NAME = Terrified Chipmunk
 
 # *DOCUMENTATION*
@@ -1321,10 +1321,12 @@
 
 # Clear a bunch of variables before executing the submake
 tools/: FORCE
-	$(Q)$(MAKE) LDFLAGS= MAKEFLAGS= -C $(src)/tools/
+	$(Q)mkdir -p $(objtree)/tools
+	$(Q)$(MAKE) LDFLAGS= MAKEFLAGS= O=$(objtree) subdir=tools -C $(src)/tools/
 
 tools/%: FORCE
-	$(Q)$(MAKE) LDFLAGS= MAKEFLAGS= -C $(src)/tools/ $*
+	$(Q)mkdir -p $(objtree)/tools
+	$(Q)$(MAKE) LDFLAGS= MAKEFLAGS= O=$(objtree) subdir=tools -C $(src)/tools/ $*
 
 # Single targets
 # ---------------------------------------------------------------------------
diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c
index 1e6956a..14db93e 100644
--- a/arch/alpha/kernel/osf_sys.c
+++ b/arch/alpha/kernel/osf_sys.c
@@ -445,7 +445,7 @@
  * unhappy with OSF UFS. [CHECKME]
  */
 static int
-osf_ufs_mount(char *dirname, struct ufs_args __user *args, int flags)
+osf_ufs_mount(const char *dirname, struct ufs_args __user *args, int flags)
 {
 	int retval;
 	struct cdfs_args tmp;
@@ -465,7 +465,7 @@
 }
 
 static int
-osf_cdfs_mount(char *dirname, struct cdfs_args __user *args, int flags)
+osf_cdfs_mount(const char *dirname, struct cdfs_args __user *args, int flags)
 {
 	int retval;
 	struct cdfs_args tmp;
@@ -485,7 +485,7 @@
 }
 
 static int
-osf_procfs_mount(char *dirname, struct procfs_args __user *args, int flags)
+osf_procfs_mount(const char *dirname, struct procfs_args __user *args, int flags)
 {
 	struct procfs_args tmp;
 
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index ade7e92..8a027f9 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -330,6 +330,8 @@
 	select IRQ_DOMAIN
 	select NEED_MACH_GPIO_H
 	select NEED_MACH_IO_H if PCCARD
+	select PINCTRL
+	select PINCTRL_AT91 if USE_OF
 	help
 	  This enables support for systems based on Atmel
 	  AT91RM9200 and AT91SAM9* processors.
@@ -364,6 +366,7 @@
 
 config ARCH_CLPS711X
 	bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
+	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_USES_GETTIMEOFFSET
 	select CLKDEV_LOOKUP
 	select COMMON_CLK
@@ -547,6 +550,7 @@
 	select CPU_FEROCEON
 	select GENERIC_CLOCKEVENTS
 	select PCI
+	select PCI_QUIRKS
 	select PLAT_ORION_LEGACY
 	help
 	  Support for the following Marvell Kirkwood series SoCs:
@@ -586,6 +590,7 @@
 	select GPIO_PXA
 	select IRQ_DOMAIN
 	select NEED_MACH_GPIO_H
+	select PINCTRL
 	select PLAT_PXA
 	select SPARSE_IRQ
 	help
@@ -904,6 +909,7 @@
 
 config PLAT_SPEAR
 	bool "ST SPEAr"
+	select ARCH_HAS_CPUFREQ
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
 	select CLKDEV_LOOKUP
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 5f914fc..c35baf1 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -292,10 +292,10 @@
 	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@
 
 %.dtb: scripts
-	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
+	$(Q)$(MAKE) $(build)=$(boot)/dts MACHINE=$(MACHINE) $(boot)/dts/$@
 
 dtbs: scripts
-	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
+	$(Q)$(MAKE) $(build)=$(boot)/dts MACHINE=$(MACHINE) dtbs
 
 # We use MRPROPER_FILES and CLEAN_FILES now
 archclean:
diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile
index f2aa09e..abfce28 100644
--- a/arch/arm/boot/Makefile
+++ b/arch/arm/boot/Makefile
@@ -15,8 +15,6 @@
 include $(srctree)/$(MACHINE)/Makefile.boot
 endif
 
-include $(srctree)/arch/arm/boot/dts/Makefile
-
 # Note: the following conditions must always be true:
 #   ZRELADDR == virt_to_phys(PAGE_OFFSET + TEXT_OFFSET)
 #   PARAMS_PHYS must be within 4MB of ZRELADDR
@@ -33,7 +31,7 @@
 
 $(obj)/xipImage: vmlinux FORCE
 	$(call if_changed,objcopy)
-	$(kecho) '  Kernel: $@ is ready (physical address: $(CONFIG_XIP_PHYS_ADDR))'
+	@$(kecho) '  Kernel: $@ is ready (physical address: $(CONFIG_XIP_PHYS_ADDR))'
 
 $(obj)/Image $(obj)/zImage: FORCE
 	@echo 'Kernel configured for XIP (CONFIG_XIP_KERNEL=y)'
@@ -48,27 +46,17 @@
 
 $(obj)/Image: vmlinux FORCE
 	$(call if_changed,objcopy)
-	$(kecho) '  Kernel: $@ is ready'
+	@$(kecho) '  Kernel: $@ is ready'
 
 $(obj)/compressed/vmlinux: $(obj)/Image FORCE
 	$(Q)$(MAKE) $(build)=$(obj)/compressed $@
 
 $(obj)/zImage:	$(obj)/compressed/vmlinux FORCE
 	$(call if_changed,objcopy)
-	$(kecho) '  Kernel: $@ is ready'
+	@$(kecho) '  Kernel: $@ is ready'
 
 endif
 
-targets += $(dtb-y)
-
-# Rule to build device tree blobs
-$(obj)/%.dtb: $(src)/dts/%.dts FORCE
-	$(call if_changed_dep,dtc)
-
-$(obj)/dtbs: $(addprefix $(obj)/, $(dtb-y))
-
-clean-files := *.dtb
-
 ifneq ($(LOADADDR),)
   UIMAGE_LOADADDR=$(LOADADDR)
 else
@@ -90,7 +78,7 @@
 $(obj)/uImage:	$(obj)/zImage FORCE
 	@$(check_for_multiple_loadaddr)
 	$(call if_changed,uimage)
-	$(kecho) '  Image $@ is ready'
+	@$(kecho) '  Image $@ is ready'
 
 $(obj)/bootp/bootp: $(obj)/zImage initrd FORCE
 	$(Q)$(MAKE) $(build)=$(obj)/bootp $@
@@ -98,7 +86,7 @@
 
 $(obj)/bootpImage: $(obj)/bootp/bootp FORCE
 	$(call if_changed,objcopy)
-	$(kecho) '  Kernel: $@ is ready'
+	@$(kecho) '  Kernel: $@ is ready'
 
 PHONY += initrd FORCE
 initrd:
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 90275f0..49ca86e 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -652,6 +652,15 @@
 		mov	pc, lr
 ENDPROC(__setup_mmu)
 
+@ Enable unaligned access on v6, to allow better code generation
+@ for the decompressor C code:
+__armv6_mmu_cache_on:
+		mrc	p15, 0, r0, c1, c0, 0	@ read SCTLR
+		bic	r0, r0, #2		@ A (no unaligned access fault)
+		orr	r0, r0, #1 << 22	@ U (v6 unaligned access model)
+		mcr	p15, 0, r0, c1, c0, 0	@ write SCTLR
+		b	__armv4_mmu_cache_on
+
 __arm926ejs_mmu_cache_on:
 #ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
 		mov	r0, #4			@ put dcache in WT mode
@@ -694,6 +703,9 @@
 		bic	r0, r0, #1 << 28	@ clear SCTLR.TRE
 		orr	r0, r0, #0x5000		@ I-cache enable, RR cache replacement
 		orr	r0, r0, #0x003c		@ write buffer
+		bic	r0, r0, #2		@ A (no unaligned access fault)
+		orr	r0, r0, #1 << 22	@ U (v6 unaligned access model)
+						@ (needed for ARM1176)
 #ifdef CONFIG_MMU
 #ifdef CONFIG_CPU_ENDIAN_BE8
 		orr	r0, r0, #1 << 25	@ big-endian page tables
@@ -914,7 +926,7 @@
 
 		.word	0x0007b000		@ ARMv6
 		.word	0x000ff000
-		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv6_mmu_cache_on
 		W(b)	__armv4_mmu_cache_off
 		W(b)	__armv6_mmu_cache_flush
 
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index f37cf9f..2624937 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1,21 +1,37 @@
 ifeq ($(CONFIG_OF),y)
 
-dtb-$(CONFIG_ARCH_AT91) += aks-cdu.dtb \
-	at91sam9263ek.dtb \
-	at91sam9g20ek_2mmc.dtb \
-	at91sam9g20ek.dtb \
-	at91sam9g25ek.dtb \
-	at91sam9m10g45ek.dtb \
-	at91sam9n12ek.dtb \
-	ethernut5.dtb \
-	evk-pro3.dtb \
-	kizbox.dtb \
-	tny_a9260.dtb \
-	tny_a9263.dtb \
-	tny_a9g20.dtb \
-	usb_a9260.dtb \
-	usb_a9263.dtb \
-	usb_a9g20.dtb
+# Keep at91 dtb files sorted alphabetically for each SoC
+# rm9200
+dtb-$(CONFIG_ARCH_AT91) += at91rm9200ek.dtb
+# sam9260
+dtb-$(CONFIG_ARCH_AT91) += animeo_ip.dtb
+dtb-$(CONFIG_ARCH_AT91) += aks-cdu.dtb
+dtb-$(CONFIG_ARCH_AT91) += ethernut5.dtb
+dtb-$(CONFIG_ARCH_AT91) += evk-pro3.dtb
+dtb-$(CONFIG_ARCH_AT91) += tny_a9260.dtb
+dtb-$(CONFIG_ARCH_AT91) += usb_a9260.dtb
+# sam9263
+dtb-$(CONFIG_ARCH_AT91) += at91sam9263ek.dtb
+dtb-$(CONFIG_ARCH_AT91) += tny_a9263.dtb
+dtb-$(CONFIG_ARCH_AT91) += usb_a9263.dtb
+# sam9g20
+dtb-$(CONFIG_ARCH_AT91) += at91sam9g20ek.dtb
+dtb-$(CONFIG_ARCH_AT91) += at91sam9g20ek_2mmc.dtb
+dtb-$(CONFIG_ARCH_AT91) += kizbox.dtb
+dtb-$(CONFIG_ARCH_AT91) += tny_a9g20.dtb
+dtb-$(CONFIG_ARCH_AT91) += usb_a9g20.dtb
+# sam9g45
+dtb-$(CONFIG_ARCH_AT91) += at91sam9m10g45ek.dtb
+dtb-$(CONFIG_ARCH_AT91) += pm9g45.dtb
+# sam9n12
+dtb-$(CONFIG_ARCH_AT91) += at91sam9n12ek.dtb
+# sam9x5
+dtb-$(CONFIG_ARCH_AT91) += at91sam9g15ek.dtb
+dtb-$(CONFIG_ARCH_AT91) += at91sam9g25ek.dtb
+dtb-$(CONFIG_ARCH_AT91) += at91sam9g35ek.dtb
+dtb-$(CONFIG_ARCH_AT91) += at91sam9x25ek.dtb
+dtb-$(CONFIG_ARCH_AT91) += at91sam9x35ek.dtb
+
 dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
 dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \
 	dove-cubox.dtb \
@@ -104,4 +120,12 @@
 	wm8505-ref.dtb \
 	wm8650-mid.dtb
 
+targets += dtbs
 endif
+
+# *.dtb used to be generated in the directory above. Clean out the
+# old build results so people don't accidentally use them.
+dtbs: $(addprefix $(obj)/, $(dtb-y))
+	$(Q)rm -f $(obj)/../*.dtb
+
+clean-files := *.dtb
diff --git a/arch/arm/boot/dts/animeo_ip.dts b/arch/arm/boot/dts/animeo_ip.dts
new file mode 100644
index 0000000..74d92cd
--- /dev/null
+++ b/arch/arm/boot/dts/animeo_ip.dts
@@ -0,0 +1,178 @@
+/*
+ * animeo_ip.dts - Device Tree file for Somfy Animeo IP Boards
+ *
+ *  Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2 only.
+ */
+
+/dts-v1/;
+/include/ "at91sam9260.dtsi"
+
+/ {
+	model = "Somfy Animeo IP";
+	compatible = "somfy,animeo-ip", "atmel,at91sam9260", "atmel,at91sam9";
+
+	aliases {
+		serial0 = &usart1;
+		serial1 = &usart2;
+		serial2 = &usart0;
+		serial3 = &dbgu;
+		serial4 = &usart3;
+		serial5 = &uart0;
+		serial6 = &uart1;
+	};
+
+	chosen {
+		linux,stdout-path = &usart2;
+	};
+
+	memory {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		main_clock: clock@0 {
+			compatible = "atmel,osc", "fixed-clock";
+			clock-frequency = <18432000>;
+		};
+	};
+
+	ahb {
+		apb {
+			usart0: serial@fffb0000 {
+				pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts>;
+				linux,rs485-enabled-at-boot-time;
+				status = "okay";
+			};
+
+			usart1: serial@fffb4000 {
+				pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts>;
+				linux,rs485-enabled-at-boot-time;
+				status = "okay";
+			};
+
+			usart2: serial@fffb8000 {
+				pinctrl-0 = <&pinctrl_usart2>;
+				status = "okay";
+			};
+
+			macb0: ethernet@fffc4000 {
+				pinctrl-0 = <&pinctrl_macb_rmii &pinctrl_macb_rmii_mii>;
+				phy-mode = "mii";
+				status = "okay";
+			};
+
+			mmc0: mmc@fffa8000 {
+				pinctrl-0 = <&pinctrl_mmc0_clk
+					     &pinctrl_mmc0_slot1_cmd_dat0
+					     &pinctrl_mmc0_slot1_dat1_3>;
+				status = "okay";
+
+				slot@1 {
+					reg = <1>;
+					bus-width = <4>;
+				};
+			};
+		};
+
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "soft";
+			nand-on-flash-bbt;
+			status = "okay";
+
+			at91bootstrap@0 {
+				label = "at91bootstrap";
+				reg = <0x0 0x8000>;
+			};
+
+			barebox@8000 {
+				label = "barebox";
+				reg = <0x8000 0x40000>;
+			};
+
+			bareboxenv@48000 {
+				label = "bareboxenv";
+				reg = <0x48000 0x8000>;
+			};
+
+			user_block@0x50000 {
+				label = "user_block";
+				reg = <0x50000 0xb0000>;
+			};
+
+			kernel@100000 {
+				label = "kernel";
+				reg = <0x100000 0x1b0000>;
+			};
+
+			root@2b0000 {
+				label = "root";
+				reg = <0x2b0000 0x1D50000>;
+			};
+		};
+
+		usb0: ohci@00500000 {
+			num-ports = <2>;
+			atmel,vbus-gpio = <&pioB 15 1>;
+			status = "okay";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power_green {
+			label = "power_green";
+			gpios = <&pioC 17 0>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		power_red {
+			label = "power_red";
+			gpios = <&pioA 2 0>;
+		};
+
+		tx_green {
+			label = "tx_green";
+			gpios = <&pioC 19 0>;
+		};
+
+		tx_red {
+			label = "tx_red";
+			gpios = <&pioC 18 0>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		keyswitch_in {
+			label = "keyswitch_in";
+			gpios = <&pioB 1 0>;
+			linux,code = <28>;
+			gpio-key,wakeup;
+		};
+
+		error_in {
+			label = "error_in";
+			gpios = <&pioB 2 0>;
+			linux,code = <29>;
+			gpio-key,wakeup;
+		};
+
+		btn {
+			label = "btn";
+			gpios = <&pioC 23 0>;
+			linux,code = <31>;
+			gpio-key,wakeup;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi
new file mode 100644
index 0000000..e154f24
--- /dev/null
+++ b/arch/arm/boot/dts/at91rm9200.dtsi
@@ -0,0 +1,349 @@
+/*
+ * at91rm9200.dtsi - Device Tree Include file for AT91RM9200 family SoC
+ *
+ *  Copyright (C) 2011 Atmel,
+ *                2011 Nicolas Ferre <nicolas.ferre@atmel.com>,
+ *                2012 Joachim Eastwood <manabian@gmail.com>
+ *
+ * Based on at91sam9260.dtsi
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	model = "Atmel AT91RM9200 family SoC";
+	compatible = "atmel,at91rm9200";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		serial1 = &usart0;
+		serial2 = &usart1;
+		serial3 = &usart2;
+		serial4 = &usart3;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		gpio3 = &pioD;
+		tcb0 = &tcb0;
+		tcb1 = &tcb1;
+	};
+	cpus {
+		cpu@0 {
+			compatible = "arm,arm920t";
+		};
+	};
+
+	memory {
+		reg = <0x20000000 0x04000000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			aic: interrupt-controller@fffff000 {
+				#interrupt-cells = <3>;
+				compatible = "atmel,at91rm9200-aic";
+				interrupt-controller;
+				reg = <0xfffff000 0x200>;
+				atmel,external-irqs = <25 26 27 28 29 30 31>;
+			};
+
+			ramc0: ramc@ffffff00 {
+				compatible = "atmel,at91rm9200-sdramc";
+				reg = <0xffffff00 0x100>;
+			};
+
+			pmc: pmc@fffffc00 {
+				compatible = "atmel,at91rm9200-pmc";
+				reg = <0xfffffc00 0x100>;
+			};
+
+			st: timer@fffffd00 {
+				compatible = "atmel,at91rm9200-st";
+				reg = <0xfffffd00 0x100>;
+				interrupts = <1 4 7>;
+			};
+
+			tcb0: timer@fffa0000 {
+				compatible = "atmel,at91rm9200-tcb";
+				reg = <0xfffa0000 0x100>;
+				interrupts = <17 4 0 18 4 0 19 4 0>;
+			};
+
+			tcb1: timer@fffa4000 {
+				compatible = "atmel,at91rm9200-tcb";
+				reg = <0xfffa4000 0x100>;
+				interrupts = <20 4 0 21 4 0 22 4 0>;
+			};
+
+			pinctrl@fffff400 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+				ranges = <0xfffff400 0xfffff400 0x800>;
+
+				atmel,mux-mask = <
+					/*    A         B     */
+					 0xffffffff 0xffffffff  /* pioA */
+					 0xffffffff 0x083fffff  /* pioB */
+					 0xffff3fff 0x00000000  /* pioC */
+					 0x03ff87ff 0x0fffff80  /* pioD */
+					>;
+
+				/* shared pinctrl settings */
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<0 30 0x1 0x0	/* PA30 periph A */
+							 0 31 0x1 0x1>;	/* PA31 periph with pullup */
+					};
+				};
+
+				uart0 {
+					pinctrl_uart0: uart0-0 {
+						atmel,pins =
+							<0 17 0x1 0x0	/* PA17 periph A */
+							 0 18 0x1 0x0>;	/* PA18 periph A */
+					};
+
+					pinctrl_uart0_rts: uart0_rts-0 {
+						atmel,pins =
+							<0 20 0x1 0x0>;	/* PA20 periph A */
+					};
+
+					pinctrl_uart0_cts: uart0_cts-0 {
+						atmel,pins =
+							<0 21 0x1 0x0>;	/* PA21 periph A */
+					};
+				};
+
+				uart1 {
+					pinctrl_uart1: uart1-0 {
+						atmel,pins =
+							<1 20 0x1 0x1	/* PB20 periph A with pullup */
+							 1 21 0x1 0x0>;	/* PB21 periph A */
+					};
+
+					pinctrl_uart1_rts: uart1_rts-0 {
+						atmel,pins =
+							<1 24 0x1 0x0>;	/* PB24 periph A */
+					};
+
+					pinctrl_uart1_cts: uart1_cts-0 {
+						atmel,pins =
+							<1 26 0x1 0x0>;	/* PB26 periph A */
+					};
+
+					pinctrl_uart1_dtr_dsr: uart1_dtr_dsr-0 {
+						atmel,pins =
+							<1 19 0x1 0x0	/* PB19 periph A */
+							 1 25 0x1 0x0>;	/* PB25 periph A */
+					};
+
+					pinctrl_uart1_dcd: uart1_dcd-0 {
+						atmel,pins =
+							<1 23 0x1 0x0>;	/* PB23 periph A */
+					};
+
+					pinctrl_uart1_ri: uart1_ri-0 {
+						atmel,pins =
+							<1 18 0x1 0x0>;	/* PB18 periph A */
+					};
+				};
+
+				uart2 {
+					pinctrl_uart2: uart2-0 {
+						atmel,pins =
+							<0 22 0x1 0x0	/* PA22 periph A */
+							 0 23 0x1 0x1>;	/* PA23 periph A with pullup */
+					};
+
+					pinctrl_uart2_rts: uart2_rts-0 {
+						atmel,pins =
+							<0 30 0x2 0x0>;	/* PA30 periph B */
+					};
+
+					pinctrl_uart2_cts: uart2_cts-0 {
+						atmel,pins =
+							<0 31 0x2 0x0>;	/* PA31 periph B */
+					};
+				};
+
+				uart3 {
+					pinctrl_uart3: uart3-0 {
+						atmel,pins =
+							<0 5 0x2 0x1	/* PA5 periph B with pullup */
+							 0 6 0x2 0x0>;	/* PA6 periph B */
+					};
+
+					pinctrl_uart3_rts: uart3_rts-0 {
+						atmel,pins =
+							<1 0 0x2 0x0>;	/* PB0 periph B */
+					};
+
+					pinctrl_uart3_cts: uart3_cts-0 {
+						atmel,pins =
+							<1 1 0x2 0x0>;	/* PB1 periph B */
+					};
+				};
+
+				nand {
+					pinctrl_nand: nand-0 {
+						atmel,pins =
+							<2 2 0x0 0x1	/* PC2 gpio RDY pin pull_up */
+							 1 1 0x0 0x1>;	/* PB1 gpio CD pin pull_up */
+					};
+				};
+
+				pioA: gpio@fffff400 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x200>;
+					interrupts = <2 4 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				pioB: gpio@fffff600 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x200>;
+					interrupts = <3 4 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				pioC: gpio@fffff800 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x200>;
+					interrupts = <4 4 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				pioD: gpio@fffffa00 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffffa00 0x200>;
+					interrupts = <5 4 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+			};
+
+			dbgu: serial@fffff200 {
+				compatible = "atmel,at91rm9200-usart";
+				reg = <0xfffff200 0x200>;
+				interrupts = <1 4 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
+				status = "disabled";
+			};
+
+			usart0: serial@fffc0000 {
+				compatible = "atmel,at91rm9200-usart";
+				reg = <0xfffc0000 0x200>;
+				interrupts = <6 4 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart0>;
+				status = "disabled";
+			};
+
+			usart1: serial@fffc4000 {
+				compatible = "atmel,at91rm9200-usart";
+				reg = <0xfffc4000 0x200>;
+				interrupts = <7 4 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1>;
+				status = "disabled";
+			};
+
+			usart2: serial@fffc8000 {
+				compatible = "atmel,at91rm9200-usart";
+				reg = <0xfffc8000 0x200>;
+				interrupts = <8 4 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart2>;
+				status = "disabled";
+			};
+
+			usart3: serial@fffcc000 {
+				compatible = "atmel,at91rm9200-usart";
+				reg = <0xfffcc000 0x200>;
+				interrupts = <23 4 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart3>;
+				status = "disabled";
+			};
+
+			usb1: gadget@fffb0000 {
+				compatible = "atmel,at91rm9200-udc";
+				reg = <0xfffb0000 0x4000>;
+				interrupts = <11 4 2>;
+				status = "disabled";
+			};
+		};
+
+		nand0: nand@40000000 {
+			compatible = "atmel,at91rm9200-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x40000000 0x10000000>;
+			atmel,nand-addr-offset = <21>;
+			atmel,nand-cmd-offset = <22>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand>;
+			nand-ecc-mode = "soft";
+			gpios = <&pioC 2 0
+				 0
+				 &pioB 1 0
+				>;
+			status = "disabled";
+		};
+
+		usb0: ohci@00300000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00300000 0x100000>;
+			interrupts = <23 4 2>;
+			status = "disabled";
+		};
+	};
+
+	i2c@0 {
+		compatible = "i2c-gpio";
+		gpios = <&pioA 23 0 /* sda */
+			 &pioA 24 0 /* scl */
+			>;
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/at91rm9200ek.dts b/arch/arm/boot/dts/at91rm9200ek.dts
new file mode 100644
index 0000000..8aa4893
--- /dev/null
+++ b/arch/arm/boot/dts/at91rm9200ek.dts
@@ -0,0 +1,79 @@
+/*
+ * at91rm9200ek.dts - Device Tree file for Atmel AT91RM9200 evaluation kit
+ *
+ *  Copyright (C) 2012 Joachim Eastwood <manabian@gmail.com>
+ *
+ * Licensed under GPLv2 only
+ */
+/dts-v1/;
+/include/ "at91rm9200.dtsi"
+
+/ {
+	model = "Atmel AT91RM9200 evaluation kit";
+	compatible = "atmel,at91rm9200ek", "atmel,at91rm9200";
+
+	memory {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		main_clock: clock@0 {
+			compatible = "atmel,osc", "fixed-clock";
+			clock-frequency = <18432000>;
+		};
+	};
+
+	ahb {
+		apb {
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			usart1: serial@fffc4000 {
+				pinctrl-0 =
+						<&pinctrl_uart1
+						 &pinctrl_uart1_rts
+						 &pinctrl_uart1_cts
+						 &pinctrl_uart1_dtr_dsr
+						 &pinctrl_uart1_dcd
+						 &pinctrl_uart1_ri>;
+				status = "okay";
+			};
+
+			usb1: gadget@fffb0000 {
+				atmel,vbus-gpio = <&pioD 4 0>;
+				status = "okay";
+			};
+		};
+
+		usb0: ohci@00300000 {
+			num-ports = <2>;
+			status = "okay";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		ds2 {
+			label = "green";
+			gpios = <&pioB 0 0x1>;
+			linux,default-trigger = "mmc0";
+		};
+
+		ds4 {
+			label = "yellow";
+			gpios = <&pioB 1 0x1>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		ds6 {
+			label = "red";
+			gpios = <&pioB 2 0x1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index d410581..b1d3fab 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -21,8 +21,8 @@
 		serial2 = &usart1;
 		serial3 = &usart2;
 		serial4 = &usart3;
-		serial5 = &usart4;
-		serial6 = &usart5;
+		serial5 = &uart0;
+		serial6 = &uart1;
 		gpio0 = &pioA;
 		gpio1 = &pioB;
 		gpio2 = &pioC;
@@ -98,40 +98,250 @@
 				interrupts = <26 4 0 27 4 0 28 4 0>;
 			};
 
-			pioA: gpio@fffff400 {
-				compatible = "atmel,at91rm9200-gpio";
-				reg = <0xfffff400 0x100>;
-				interrupts = <2 4 1>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
+			pinctrl@fffff400 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+				ranges = <0xfffff400 0xfffff400 0x600>;
 
-			pioB: gpio@fffff600 {
-				compatible = "atmel,at91rm9200-gpio";
-				reg = <0xfffff600 0x100>;
-				interrupts = <3 4 1>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
+				atmel,mux-mask = <
+				      /*    A         B     */
+				       0xffffffff 0xffc00c3b  /* pioA */
+				       0xffffffff 0x7fff3ccf  /* pioB */
+				       0xffffffff 0x007fffff  /* pioC */
+				      >;
 
-			pioC: gpio@fffff800 {
-				compatible = "atmel,at91rm9200-gpio";
-				reg = <0xfffff800 0x100>;
-				interrupts = <4 4 1>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
+				/* shared pinctrl settings */
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<1 14 0x1 0x0	/* PB14 periph A */
+							 1 15 0x1 0x1>;	/* PB15 periph with pullup */
+					};
+				};
+
+				usart0 {
+					pinctrl_usart0: usart0-0 {
+						atmel,pins =
+							<1 4 0x1 0x0	/* PB4 periph A */
+							 1 5 0x1 0x0>;	/* PB5 periph A */
+					};
+
+					pinctrl_usart0_rts: usart0_rts-0 {
+						atmel,pins =
+							<1 26 0x1 0x0>;	/* PB26 periph A */
+					};
+
+					pinctrl_usart0_cts: usart0_cts-0 {
+						atmel,pins =
+							<1 27 0x1 0x0>;	/* PB27 periph A */
+					};
+
+					pinctrl_usart0_dtr_dsr: usart0_dtr_dsr-0 {
+						atmel,pins =
+							<1 24 0x1 0x0	/* PB24 periph A */
+							 1 22 0x1 0x0>;	/* PB22 periph A */
+					};
+
+					pinctrl_usart0_dcd: usart0_dcd-0 {
+						atmel,pins =
+							<1 23 0x1 0x0>;	/* PB23 periph A */
+					};
+
+					pinctrl_usart0_ri: usart0_ri-0 {
+						atmel,pins =
+							<1 25 0x1 0x0>;	/* PB25 periph A */
+					};
+				};
+
+				usart1 {
+					pinctrl_usart1: usart1-0 {
+						atmel,pins =
+							<2 6 0x1 0x1	/* PB6 periph A with pullup */
+							 2 7 0x1 0x0>;	/* PB7 periph A */
+					};
+
+					pinctrl_usart1_rts: usart1_rts-0 {
+						atmel,pins =
+							<1 28 0x1 0x0>;	/* PB28 periph A */
+					};
+
+					pinctrl_usart1_cts: usart1_cts-0 {
+						atmel,pins =
+							<1 29 0x1 0x0>;	/* PB29 periph A */
+					};
+				};
+
+				usart2 {
+					pinctrl_usart2: usart2-0 {
+						atmel,pins =
+							<1 8 0x1 0x1	/* PB8 periph A with pullup */
+							 1 9 0x1 0x0>;	/* PB9 periph A */
+					};
+
+					pinctrl_usart2_rts: usart2_rts-0 {
+						atmel,pins =
+							<0 4 0x1 0x0>;	/* PA4 periph A */
+					};
+
+					pinctrl_usart2_cts: usart2_cts-0 {
+						atmel,pins =
+							<0 5 0x1 0x0>;	/* PA5 periph A */
+					};
+				};
+
+				usart3 {
+					pinctrl_usart3: usart3-0 {
+						atmel,pins =
+							<2 10 0x1 0x1	/* PB10 periph A with pullup */
+							 2 11 0x1 0x0>;	/* PB11 periph A */
+					};
+
+					pinctrl_usart3_rts: usart3_rts-0 {
+						atmel,pins =
+							<3 8 0x2 0x0>;	/* PB8 periph B */
+					};
+
+					pinctrl_usart3_cts: usart3_cts-0 {
+						atmel,pins =
+							<3 10 0x2 0x0>;	/* PB10 periph B */
+					};
+				};
+
+				uart0 {
+					pinctrl_uart0: uart0-0 {
+						atmel,pins =
+							<0 31 0x2 0x1	/* PA31 periph B with pullup */
+							 0 30 0x2 0x0>;	/* PA30 periph B */
+					};
+				};
+
+				uart1 {
+					pinctrl_uart1: uart1-0 {
+						atmel,pins =
+							<2 12 0x1 0x1	/* PB12 periph A with pullup */
+							 2 13 0x1 0x0>;	/* PB13 periph A */
+					};
+				};
+
+				nand {
+					pinctrl_nand: nand-0 {
+						atmel,pins =
+							<2 13 0x0 0x1	/* PC13 gpio RDY pin pull_up */
+							 2 14 0x0 0x1>;	/* PC14 gpio enable pin pull_up */
+					};
+				};
+
+				macb {
+					pinctrl_macb_rmii: macb_rmii-0 {
+						atmel,pins =
+							<0 12 0x1 0x0	/* PA12 periph A */
+							 0 13 0x1 0x0	/* PA13 periph A */
+							 0 14 0x1 0x0	/* PA14 periph A */
+							 0 15 0x1 0x0	/* PA15 periph A */
+							 0 16 0x1 0x0	/* PA16 periph A */
+							 0 17 0x1 0x0	/* PA17 periph A */
+							 0 18 0x1 0x0	/* PA18 periph A */
+							 0 19 0x1 0x0	/* PA19 periph A */
+							 0 20 0x1 0x0	/* PA20 periph A */
+							 0 21 0x1 0x0>;	/* PA21 periph A */
+					};
+
+					pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
+						atmel,pins =
+							<0 22 0x2 0x0	/* PA22 periph B */
+							 0 23 0x2 0x0	/* PA23 periph B */
+							 0 24 0x2 0x0	/* PA24 periph B */
+							 0 25 0x2 0x0	/* PA25 periph B */
+							 0 26 0x2 0x0	/* PA26 periph B */
+							 0 27 0x2 0x0	/* PA27 periph B */
+							 0 28 0x2 0x0	/* PA28 periph B */
+							 0 29 0x2 0x0>;	/* PA29 periph B */
+					};
+
+					pinctrl_macb_rmii_mii_alt: macb_rmii_mii-1 {
+						atmel,pins =
+							<0 10 0x2 0x0	/* PA10 periph B */
+							 0 11 0x2 0x0	/* PA11 periph B */
+							 0 24 0x2 0x0	/* PA24 periph B */
+							 0 25 0x2 0x0	/* PA25 periph B */
+							 0 26 0x2 0x0	/* PA26 periph B */
+							 0 27 0x2 0x0	/* PA27 periph B */
+							 0 28 0x2 0x0	/* PA28 periph B */
+							 0 29 0x2 0x0>;	/* PA29 periph B */
+					};
+				};
+
+				mmc0 {
+					pinctrl_mmc0_clk: mmc0_clk-0 {
+						atmel,pins =
+							<0 8 0x1 0x0>;	/* PA8 periph A */
+					};
+
+					pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
+						atmel,pins =
+							<0 7 0x1 0x1	/* PA7 periph A with pullup */
+							 0 6 0x1 0x1>;	/* PA6 periph A with pullup */
+					};
+
+					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+						atmel,pins =
+							<0 9 0x1 0x1	/* PA9 periph A with pullup */
+							 0 10 0x1 0x1	/* PA10 periph A with pullup */
+							 0 11 0x1 0x1>;	/* PA11 periph A with pullup */
+					};
+
+					pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 {
+						atmel,pins =
+							<0 1 0x2 0x1	/* PA1 periph B with pullup */
+							 0 0 0x2 0x1>;	/* PA0 periph B with pullup */
+					};
+
+					pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 {
+						atmel,pins =
+							<0 5 0x2 0x1	/* PA5 periph B with pullup */
+							 0 4 0x2 0x1	/* PA4 periph B with pullup */
+							 0 3 0x2 0x1>;	/* PA3 periph B with pullup */
+					};
+				};
+
+				pioA: gpio@fffff400 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x200>;
+					interrupts = <2 4 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				pioB: gpio@fffff600 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x200>;
+					interrupts = <3 4 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				pioC: gpio@fffff800 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x200>;
+					interrupts = <4 4 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
 			};
 
 			dbgu: serial@fffff200 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffff200 0x200>;
 				interrupts = <1 4 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
 				status = "disabled";
 			};
 
@@ -141,6 +351,8 @@
 				interrupts = <6 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart0>;
 				status = "disabled";
 			};
 
@@ -150,6 +362,8 @@
 				interrupts = <7 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1>;
 				status = "disabled";
 			};
 
@@ -159,6 +373,8 @@
 				interrupts = <8 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart2>;
 				status = "disabled";
 			};
 
@@ -168,24 +384,30 @@
 				interrupts = <23 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart3>;
 				status = "disabled";
 			};
 
-			usart4: serial@fffd4000 {
+			uart0: serial@fffd4000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffd4000 0x200>;
 				interrupts = <24 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart0>;
 				status = "disabled";
 			};
 
-			usart5: serial@fffd8000 {
+			uart1: serial@fffd8000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffd8000 0x200>;
 				interrupts = <25 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1>;
 				status = "disabled";
 			};
 
@@ -193,6 +415,8 @@
 				compatible = "cdns,at32ap7000-macb", "cdns,macb";
 				reg = <0xfffc4000 0x100>;
 				interrupts = <21 4 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb_rmii>;
 				status = "disabled";
 			};
 
@@ -212,6 +436,15 @@
 				status = "disabled";
 			};
 
+			mmc0: mmc@fffa8000 {
+				compatible = "atmel,hsmci";
+				reg = <0xfffa8000 0x600>;
+				interrupts = <9 4 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
 			adc0: adc@fffe0000 {
 				compatible = "atmel,at91sam9260-adc";
 				reg = <0xfffe0000 0x100>;
@@ -257,6 +490,8 @@
 			      >;
 			atmel,nand-addr-offset = <21>;
 			atmel,nand-cmd-offset = <22>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand>;
 			gpios = <&pioC 13 0
 				 &pioC 14 0
 				 0
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index 3e6e5c1..66106ee 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -89,60 +89,243 @@
 				reg = <0xfffffd10 0x10>;
 			};
 
-			pioA: gpio@fffff200 {
-				compatible = "atmel,at91rm9200-gpio";
-				reg = <0xfffff200 0x100>;
-				interrupts = <2 4 1>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
+			pinctrl@fffff200 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+				ranges = <0xfffff200 0xfffff200 0xa00>;
 
-			pioB: gpio@fffff400 {
-				compatible = "atmel,at91rm9200-gpio";
-				reg = <0xfffff400 0x100>;
-				interrupts = <3 4 1>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
+				atmel,mux-mask = <
+				      /*    A         B     */
+				       0xfffffffb 0xffffe07f  /* pioA */
+				       0x0007ffff 0x39072fff  /* pioB */
+				       0xffffffff 0x3ffffff8  /* pioC */
+				       0xfffffbff 0xffffffff  /* pioD */
+				       0xffe00fff 0xfbfcff00  /* pioE */
+				      >;
 
-			pioC: gpio@fffff600 {
-				compatible = "atmel,at91rm9200-gpio";
-				reg = <0xfffff600 0x100>;
-				interrupts = <4 4 1>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
+				/* shared pinctrl settings */
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<2 30 0x1 0x0	/* PC30 periph A */
+							 2 31 0x1 0x1>;	/* PC31 periph with pullup */
+					};
+				};
 
-			pioD: gpio@fffff800 {
-				compatible = "atmel,at91rm9200-gpio";
-				reg = <0xfffff800 0x100>;
-				interrupts = <4 4 1>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
+				usart0 {
+					pinctrl_usart0: usart0-0 {
+						atmel,pins =
+							<0 26 0x1 0x1	/* PA26 periph A with pullup */
+							 0 27 0x1 0x0>;	/* PA27 periph A */
+					};
 
-			pioE: gpio@fffffa00 {
-				compatible = "atmel,at91rm9200-gpio";
-				reg = <0xfffffa00 0x100>;
-				interrupts = <4 4 1>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
+					pinctrl_usart0_rts: usart0_rts-0 {
+						atmel,pins =
+							<0 28 0x1 0x0>;	/* PA28 periph A */
+					};
+
+					pinctrl_usart0_cts: usart0_cts-0 {
+						atmel,pins =
+							<0 29 0x1 0x0>;	/* PA29 periph A */
+					};
+				};
+
+				usart1 {
+					pinctrl_usart1: usart1-0 {
+						atmel,pins =
+							<3 0 0x1 0x1	/* PD0 periph A with pullup */
+							 3 1 0x1 0x0>;	/* PD1 periph A */
+					};
+
+					pinctrl_usart1_rts: usart1_rts-0 {
+						atmel,pins =
+							<3 7 0x2 0x0>;	/* PD7 periph B */
+					};
+
+					pinctrl_usart1_cts: usart1_cts-0 {
+						atmel,pins =
+							<3 8 0x2 0x0>;	/* PD8 periph B */
+					};
+				};
+
+				usart2 {
+					pinctrl_usart2: usart2-0 {
+						atmel,pins =
+							<3 2 0x1 0x1	/* PD2 periph A with pullup */
+							 3 3 0x1 0x0>;	/* PD3 periph A */
+					};
+
+					pinctrl_usart2_rts: usart2_rts-0 {
+						atmel,pins =
+							<3 5 0x2 0x0>;	/* PD5 periph B */
+					};
+
+					pinctrl_usart2_cts: usart2_cts-0 {
+						atmel,pins =
+							<4 6 0x2 0x0>;	/* PD6 periph B */
+					};
+				};
+
+				nand {
+					pinctrl_nand: nand-0 {
+						atmel,pins =
+							<0 22 0x0 0x1	/* PA22 gpio RDY pin pull_up*/
+							 3 15 0x0 0x1>;	/* PD15 gpio enable pin pull_up */
+					};
+				};
+
+				macb {
+					pinctrl_macb_rmii: macb_rmii-0 {
+						atmel,pins =
+							<2 25 0x2 0x0	/* PC25 periph B */
+							 4 21 0x1 0x0	/* PE21 periph A */
+							 4 23 0x1 0x0	/* PE23 periph A */
+							 4 24 0x1 0x0	/* PE24 periph A */
+							 4 25 0x1 0x0	/* PE25 periph A */
+							 4 26 0x1 0x0	/* PE26 periph A */
+							 4 27 0x1 0x0	/* PE27 periph A */
+							 4 28 0x1 0x0	/* PE28 periph A */
+							 4 29 0x1 0x0	/* PE29 periph A */
+							 4 30 0x1 0x0>;	/* PE30 periph A */
+					};
+
+					pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
+						atmel,pins =
+							<2 20 0x2 0x0	/* PC20 periph B */
+							 2 21 0x2 0x0	/* PC21 periph B */
+							 2 22 0x2 0x0	/* PC22 periph B */
+							 2 23 0x2 0x0	/* PC23 periph B */
+							 2 24 0x2 0x0	/* PC24 periph B */
+							 2 25 0x2 0x0	/* PC25 periph B */
+							 2 27 0x2 0x0	/* PC27 periph B */
+							 4 22 0x2 0x0>;	/* PE22 periph B */
+					};
+				};
+
+				mmc0 {
+					pinctrl_mmc0_clk: mmc0_clk-0 {
+						atmel,pins =
+							<0 12 0x1 0x0>;	/* PA12 periph A */
+					};
+
+					pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
+						atmel,pins =
+							<0 1 0x1 0x1	/* PA1 periph A with pullup */
+							 0 0 0x1 0x1>;	/* PA0 periph A with pullup */
+					};
+
+					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+						atmel,pins =
+							<0 3 0x1 0x1	/* PA3 periph A with pullup */
+							 0 4 0x1 0x1	/* PA4 periph A with pullup */
+							 0 5 0x1 0x1>;	/* PA5 periph A with pullup */
+					};
+
+					pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 {
+						atmel,pins =
+							<0 16 0x1 0x1	/* PA16 periph A with pullup */
+							 0 17 0x1 0x1>;	/* PA17 periph A with pullup */
+					};
+
+					pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 {
+						atmel,pins =
+							<0 18 0x1 0x1	/* PA18 periph A with pullup */
+							 0 19 0x1 0x1	/* PA19 periph A with pullup */
+							 0 20 0x1 0x1>;	/* PA20 periph A with pullup */
+					};
+				};
+
+				mmc1 {
+					pinctrl_mmc1_clk: mmc1_clk-0 {
+						atmel,pins =
+							<0 6 0x1 0x0>;	/* PA6 periph A */
+					};
+
+					pinctrl_mmc1_slot0_cmd_dat0: mmc1_slot0_cmd_dat0-0 {
+						atmel,pins =
+							<0 7 0x1 0x1	/* PA7 periph A with pullup */
+							 0 8 0x1 0x1>;	/* PA8 periph A with pullup */
+					};
+
+					pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 {
+						atmel,pins =
+							<0 9 0x1 0x1	/* PA9 periph A with pullup */
+							 0 10 0x1 0x1	/* PA10 periph A with pullup */
+							 0 11 0x1 0x1>;	/* PA11 periph A with pullup */
+					};
+
+					pinctrl_mmc1_slot1_cmd_dat0: mmc1_slot1_cmd_dat0-0 {
+						atmel,pins =
+							<0 21 0x1 0x1	/* PA21 periph A with pullup */
+							 0 22 0x1 0x1>;	/* PA22 periph A with pullup */
+					};
+
+					pinctrl_mmc1_slot1_dat1_3: mmc1_slot1_dat1_3-0 {
+						atmel,pins =
+							<0 23 0x1 0x1	/* PA23 periph A with pullup */
+							 0 24 0x1 0x1	/* PA24 periph A with pullup */
+							 0 25 0x1 0x1>;	/* PA25 periph A with pullup */
+					};
+				};
+
+				pioA: gpio@fffff200 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff200 0x200>;
+					interrupts = <2 4 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				pioB: gpio@fffff400 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x200>;
+					interrupts = <3 4 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				pioC: gpio@fffff600 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x200>;
+					interrupts = <4 4 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				pioD: gpio@fffff800 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x200>;
+					interrupts = <4 4 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				pioE: gpio@fffffa00 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffffa00 0x200>;
+					interrupts = <4 4 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
 			};
 
 			dbgu: serial@ffffee00 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xffffee00 0x200>;
 				interrupts = <1 4 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
 				status = "disabled";
 			};
 
@@ -152,6 +335,8 @@
 				interrupts = <7 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart0>;
 				status = "disabled";
 			};
 
@@ -161,6 +346,8 @@
 				interrupts = <8 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1>;
 				status = "disabled";
 			};
 
@@ -170,6 +357,8 @@
 				interrupts = <9 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart2>;
 				status = "disabled";
 			};
 
@@ -177,6 +366,8 @@
 				compatible = "cdns,at32ap7000-macb", "cdns,macb";
 				reg = <0xfffbc000 0x100>;
 				interrupts = <21 4 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb_rmii>;
 				status = "disabled";
 			};
 
@@ -195,6 +386,24 @@
 				#size-cells = <0>;
 				status = "disabled";
 			};
+
+			mmc0: mmc@fff80000 {
+				compatible = "atmel,hsmci";
+				reg = <0xfff80000 0x600>;
+				interrupts = <10 4 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			mmc1: mmc@fff84000 {
+				compatible = "atmel,hsmci";
+				reg = <0xfff84000 0x600>;
+				interrupts = <11 4 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
 		};
 
 		nand0: nand@40000000 {
@@ -206,6 +415,8 @@
 			      >;
 			atmel,nand-addr-offset = <21>;
 			atmel,nand-cmd-offset = <22>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand>;
 			gpios = <&pioA 22 0
 				 &pioD 15 0
 				 0
diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts
index f86ac4b..1eb0872 100644
--- a/arch/arm/boot/dts/at91sam9263ek.dts
+++ b/arch/arm/boot/dts/at91sam9263ek.dts
@@ -38,6 +38,10 @@
 			};
 
 			usart0: serial@fff8c000 {
+				pinctrl-0 = <
+					&pinctrl_usart0
+					&pinctrl_usart0_rts
+					&pinctrl_usart0_cts>;
 				status = "okay";
 			};
 
@@ -50,6 +54,31 @@
 				atmel,vbus-gpio = <&pioA 25 0>;
 				status = "okay";
 			};
+
+			mmc0: mmc@fff80000 {
+				pinctrl-0 = <
+					&pinctrl_board_mmc0
+					&pinctrl_mmc0_clk
+					&pinctrl_mmc0_slot0_cmd_dat0
+					&pinctrl_mmc0_slot0_dat1_3>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioE 18 0>;
+					wp-gpios = <&pioE 19 0>;
+				};
+			};
+
+			pinctrl@fffff200 {
+				mmc0 {
+					pinctrl_board_mmc0: mmc0-board {
+						atmel,pins =
+							<5 18 0x0 0x5	/* PE18 gpio CD pin pull up and deglitch */
+							 5 19 0x0 0x1>;	/* PE19 gpio WP pin pull up */
+					};
+				};
+			};
 		};
 
 		nand0: nand@40000000 {
diff --git a/arch/arm/boot/dts/at91sam9g15.dtsi b/arch/arm/boot/dts/at91sam9g15.dtsi
new file mode 100644
index 0000000..fbe7a70
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9g15.dtsi
@@ -0,0 +1,28 @@
+/*
+ * at91sam9g15.dtsi - Device Tree Include file for AT91SAM9G15 SoC
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+/include/ "at91sam9x5.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9G15 SoC";
+	compatible = "atmel, at91sam9g15, atmel,at91sam9x5";
+
+	ahb {
+		apb {
+			pinctrl@fffff400 {
+				atmel,mux-mask = <
+				      /*    A         B          C     */
+				       0xffffffff 0xffe0399f 0x00000000  /* pioA */
+				       0x00040000 0x00047e3f 0x00000000  /* pioB */
+				       0xfdffffff 0x00000000 0xb83fffff  /* pioC */
+				       0x003fffff 0x003f8000 0x00000000  /* pioD */
+				      >;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9g15ek.dts b/arch/arm/boot/dts/at91sam9g15ek.dts
new file mode 100644
index 0000000..86dd3f6
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9g15ek.dts
@@ -0,0 +1,16 @@
+/*
+ * at91sam9g15ek.dts - Device Tree file for AT91SAM9G15-EK board
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+/include/ "at91sam9g15.dtsi"
+/include/ "at91sam9x5ek.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9G25-EK";
+	compatible = "atmel,at91sam9g15ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+};
diff --git a/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts b/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts
index f1b2e14..66467b1 100644
--- a/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts
+++ b/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts
@@ -12,6 +12,32 @@
 	model = "Atmel at91sam9g20ek 2 mmc";
 	compatible = "atmel,at91sam9g20ek_2mmc", "atmel,at91sam9g20", "atmel,at91sam9";
 
+	ahb {
+		apb{
+			mmc0: mmc@fffa8000 {
+				/* clk already mux wuth slot0 */
+				pinctrl-0 = <
+					&pinctrl_board_mmc0_slot0
+					&pinctrl_mmc0_slot0_cmd_dat0
+					&pinctrl_mmc0_slot0_dat1_3>;
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioC 2 0>;
+				};
+			};
+
+			pinctrl@fffff400 {
+				mmc0_slot0 {
+					pinctrl_board_mmc0_slot0: mmc0_slot0-board {
+						atmel,pins =
+							<2 2 0x0 0x5>;	/* PC2 gpio CD pin pull up and deglitch */
+					};
+				};
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
index e6391a4..32a500a 100644
--- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
@@ -35,6 +35,13 @@
 			};
 
 			usart0: serial@fffb0000 {
+				pinctrl-0 =
+					<&pinctrl_usart0
+					 &pinctrl_usart0_rts
+					 &pinctrl_usart0_cts
+					 &pinctrl_usart0_dtr_dsr
+					 &pinctrl_usart0_dcd
+					 &pinctrl_usart0_ri>;
 				status = "okay";
 			};
 
@@ -51,6 +58,29 @@
 				atmel,vbus-gpio = <&pioC 5 0>;
 				status = "okay";
 			};
+
+			mmc0: mmc@fffa8000 {
+				pinctrl-0 = <
+					&pinctrl_board_mmc0_slot1
+					&pinctrl_mmc0_clk
+					&pinctrl_mmc0_slot1_cmd_dat0
+					&pinctrl_mmc0_slot1_dat1_3>;
+				status = "okay";
+				slot@1 {
+					reg = <1>;
+					bus-width = <4>;
+					cd-gpios = <&pioC 9 0>;
+				};
+			};
+
+			pinctrl@fffff400 {
+				mmc0_slot1 {
+					pinctrl_board_mmc0_slot1: mmc0_slot1-board {
+						atmel,pins =
+							<2 9 0x0 0x5>;	/* PC9 gpio CD pin pull up and deglitch */
+					};
+				};
+			};
 		};
 
 		nand0: nand@40000000 {
diff --git a/arch/arm/boot/dts/at91sam9g25.dtsi b/arch/arm/boot/dts/at91sam9g25.dtsi
new file mode 100644
index 0000000..05a718f
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9g25.dtsi
@@ -0,0 +1,28 @@
+/*
+ * at91sam9g25.dtsi - Device Tree Include file for AT91SAM9G25 SoC
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+/include/ "at91sam9x5.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9G25 SoC";
+	compatible = "atmel, at91sam9g25, atmel,at91sam9x5";
+
+	ahb {
+		apb {
+			pinctrl@fffff400 {
+				atmel,mux-mask = <
+				      /*    A         B          C     */
+				       0xffffffff 0xffe0399f 0xc000001c  /* pioA */
+				       0x0007ffff 0x8000fe3f 0x00000000  /* pioB */
+				       0x80000000 0x07c0ffff 0xb83fffff  /* pioC */
+				       0x003fffff 0x003f8000 0x00000000  /* pioD */
+				      >;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts
index 877c08f..c5ab16f 100644
--- a/arch/arm/boot/dts/at91sam9g25ek.dts
+++ b/arch/arm/boot/dts/at91sam9g25ek.dts
@@ -7,55 +7,10 @@
  * Licensed under GPLv2 or later.
  */
 /dts-v1/;
-/include/ "at91sam9x5.dtsi"
-/include/ "at91sam9x5cm.dtsi"
+/include/ "at91sam9g25.dtsi"
+/include/ "at91sam9x5ek.dtsi"
 
 / {
 	model = "Atmel AT91SAM9G25-EK";
 	compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
-	};
-
-	ahb {
-		apb {
-			dbgu: serial@fffff200 {
-				status = "okay";
-			};
-
-			usart0: serial@f801c000 {
-				status = "okay";
-			};
-
-			macb0: ethernet@f802c000 {
-				phy-mode = "rmii";
-				status = "okay";
-			};
-
-			i2c0: i2c@f8010000 {
-				status = "okay";
-			};
-
-			i2c1: i2c@f8014000 {
-				status = "okay";
-			};
-
-			i2c2: i2c@f8018000 {
-				status = "okay";
-			};
-		};
-
-		usb0: ohci@00600000 {
-			status = "okay";
-			num-ports = <2>;
-			atmel,vbus-gpio = <&pioD 19 1
-					   &pioD 20 1
-					  >;
-		};
-
-		usb1: ehci@00700000 {
-			status = "okay";
-		};
-	};
 };
diff --git a/arch/arm/boot/dts/at91sam9g35.dtsi b/arch/arm/boot/dts/at91sam9g35.dtsi
new file mode 100644
index 0000000..f9d14a7
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9g35.dtsi
@@ -0,0 +1,28 @@
+/*
+ * at91sam9g35.dtsi - Device Tree Include file for AT91SAM9G35 SoC
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+/include/ "at91sam9x5.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9G35 SoC";
+	compatible = "atmel, at91sam9g35, atmel,at91sam9x5";
+
+	ahb {
+		apb {
+			pinctrl@fffff400 {
+				atmel,mux-mask = <
+				      /*    A         B          C     */
+				       0xffffffff 0xffe0399f 0xc000000c  /* pioA */
+				       0x000406ff 0x00047e3f 0x00000000  /* pioB */
+				       0xfdffffff 0x00000000 0xb83fffff  /* pioC */
+				       0x003fffff 0x003f8000 0x00000000  /* pioD */
+				      >;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9g35ek.dts b/arch/arm/boot/dts/at91sam9g35ek.dts
new file mode 100644
index 0000000..95944bd
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9g35ek.dts
@@ -0,0 +1,16 @@
+/*
+ * at91sam9g35ek.dts - Device Tree file for AT91SAM9G35-EK board
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+/include/ "at91sam9g35.dtsi"
+/include/ "at91sam9x5ek.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9G35-EK";
+	compatible = "atmel,at91sam9g35ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+};
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index 3add030..0741cae 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -108,60 +108,243 @@
 				interrupts = <21 4 0>;
 			};
 
-			pioA: gpio@fffff200 {
-				compatible = "atmel,at91rm9200-gpio";
-				reg = <0xfffff200 0x100>;
-				interrupts = <2 4 1>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
+			pinctrl@fffff200 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+				ranges = <0xfffff200 0xfffff200 0xa00>;
 
-			pioB: gpio@fffff400 {
-				compatible = "atmel,at91rm9200-gpio";
-				reg = <0xfffff400 0x100>;
-				interrupts = <3 4 1>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
+				atmel,mux-mask = <
+				      /*    A         B     */
+				       0xffffffff 0xffc003ff  /* pioA */
+				       0xffffffff 0x800f8f00  /* pioB */
+				       0xffffffff 0x00000e00  /* pioC */
+				       0xffffffff 0xff0c1381  /* pioD */
+				       0xffffffff 0x81ffff81  /* pioE */
+				      >;
 
-			pioC: gpio@fffff600 {
-				compatible = "atmel,at91rm9200-gpio";
-				reg = <0xfffff600 0x100>;
-				interrupts = <4 4 1>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
+				/* shared pinctrl settings */
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<1 12 0x1 0x0	/* PB12 periph A */
+							 1 13 0x1 0x0>;	/* PB13 periph A */
+					};
+				};
 
-			pioD: gpio@fffff800 {
-				compatible = "atmel,at91rm9200-gpio";
-				reg = <0xfffff800 0x100>;
-				interrupts = <5 4 1>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
+				usart0 {
+					pinctrl_usart0: usart0-0 {
+						atmel,pins =
+							<1 19 0x1 0x1	/* PB19 periph A with pullup */
+							 1 18 0x1 0x0>;	/* PB18 periph A */
+					};
 
-			pioE: gpio@fffffa00 {
-				compatible = "atmel,at91rm9200-gpio";
-				reg = <0xfffffa00 0x100>;
-				interrupts = <5 4 1>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
+					pinctrl_usart0_rts: usart0_rts-0 {
+						atmel,pins =
+							<1 17 0x2 0x0>;	/* PB17 periph B */
+					};
+
+					pinctrl_usart0_cts: usart0_cts-0 {
+						atmel,pins =
+							<1 15 0x2 0x0>;	/* PB15 periph B */
+					};
+				};
+
+				uart1 {
+					pinctrl_usart1: usart1-0 {
+						atmel,pins =
+							<1 4 0x1 0x1	/* PB4 periph A with pullup */
+							 1 5 0x1 0x0>;	/* PB5 periph A */
+					};
+
+					pinctrl_usart1_rts: usart1_rts-0 {
+						atmel,pins =
+							<3 16 0x1 0x0>;	/* PD16 periph A */
+					};
+
+					pinctrl_usart1_cts: usart1_cts-0 {
+						atmel,pins =
+							<3 17 0x1 0x0>;	/* PD17 periph A */
+					};
+				};
+
+				usart2 {
+					pinctrl_usart2: usart2-0 {
+						atmel,pins =
+							<1 6 0x1 0x1	/* PB6 periph A with pullup */
+							 1 7 0x1 0x0>;	/* PB7 periph A */
+					};
+
+					pinctrl_usart2_rts: usart2_rts-0 {
+						atmel,pins =
+							<2 9 0x2 0x0>;	/* PC9 periph B */
+					};
+
+					pinctrl_usart2_cts: usart2_cts-0 {
+						atmel,pins =
+							<2 11 0x2 0x0>;	/* PC11 periph B */
+					};
+				};
+
+				usart3 {
+					pinctrl_usart3: usart3-0 {
+						atmel,pins =
+							<1 8 0x1 0x1	/* PB9 periph A with pullup */
+							 1 9 0x1 0x0>;	/* PB8 periph A */
+					};
+
+					pinctrl_usart3_rts: usart3_rts-0 {
+						atmel,pins =
+							<0 23 0x2 0x0>;	/* PA23 periph B */
+					};
+
+					pinctrl_usart3_cts: usart3_cts-0 {
+						atmel,pins =
+							<0 24 0x2 0x0>;	/* PA24 periph B */
+					};
+				};
+
+				nand {
+					pinctrl_nand: nand-0 {
+						atmel,pins =
+							<2 8 0x0 0x1	/* PC8 gpio RDY pin pull_up*/
+							 2 14 0x0 0x1>;	/* PC14 gpio enable pin pull_up */
+					};
+				};
+
+				macb {
+					pinctrl_macb_rmii: macb_rmii-0 {
+						atmel,pins =
+							<0 10 0x1 0x0	/* PA10 periph A */
+							 0 11 0x1 0x0	/* PA11 periph A */
+							 0 12 0x1 0x0	/* PA12 periph A */
+							 0 13 0x1 0x0	/* PA13 periph A */
+							 0 14 0x1 0x0	/* PA14 periph A */
+							 0 15 0x1 0x0	/* PA15 periph A */
+							 0 16 0x1 0x0	/* PA16 periph A */
+							 0 17 0x1 0x0	/* PA17 periph A */
+							 0 18 0x1 0x0	/* PA18 periph A */
+							 0 19 0x1 0x0>;	/* PA19 periph A */
+					};
+
+					pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
+						atmel,pins =
+							<0 6 0x2 0x0	/* PA6 periph B */
+							 0 7 0x2 0x0	/* PA7 periph B */
+							 0 8 0x2 0x0	/* PA8 periph B */
+							 0 9 0x2 0x0	/* PA9 periph B */
+							 0 27 0x2 0x0	/* PA27 periph B */
+							 0 28 0x2 0x0	/* PA28 periph B */
+							 0 29 0x2 0x0	/* PA29 periph B */
+							 0 30 0x2 0x0>;	/* PA30 periph B */
+					};
+				};
+
+				mmc0 {
+					pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 {
+						atmel,pins =
+							<0 0 0x1 0x0	/* PA0 periph A */
+							 0 1 0x1 0x1	/* PA1 periph A with pullup */
+							 0 2 0x1 0x1>;	/* PA2 periph A with pullup */
+					};
+
+					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+						atmel,pins =
+							<0 3 0x1 0x1	/* PA3 periph A with pullup */
+							 0 4 0x1 0x1	/* PA4 periph A with pullup */
+							 0 5 0x1 0x1>;	/* PA5 periph A with pullup */
+					};
+
+					pinctrl_mmc0_slot0_dat4_7: mmc0_slot0_dat4_7-0 {
+						atmel,pins =
+							<0 6 0x1 0x1	/* PA6 periph A with pullup */
+							 0 7 0x1 0x1	/* PA7 periph A with pullup */
+							 0 8 0x1 0x1	/* PA8 periph A with pullup */
+							 0 9 0x1 0x1>;	/* PA9 periph A with pullup */
+					};
+				};
+
+				mmc1 {
+					pinctrl_mmc1_slot0_clk_cmd_dat0: mmc1_slot0_clk_cmd_dat0-0 {
+						atmel,pins =
+							<0 31 0x1 0x0	/* PA31 periph A */
+							 0 22 0x1 0x1	/* PA22 periph A with pullup */
+							 0 23 0x1 0x1>;	/* PA23 periph A with pullup */
+					};
+
+					pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 {
+						atmel,pins =
+							<0 24 0x1 0x1	/* PA24 periph A with pullup */
+							 0 25 0x1 0x1	/* PA25 periph A with pullup */
+							 0 26 0x1 0x1>;	/* PA26 periph A with pullup */
+					};
+
+					pinctrl_mmc1_slot0_dat4_7: mmc1_slot0_dat4_7-0 {
+						atmel,pins =
+							<0 27 0x1 0x1	/* PA27 periph A with pullup */
+							 0 28 0x1 0x1	/* PA28 periph A with pullup */
+							 0 29 0x1 0x1	/* PA29 periph A with pullup */
+							 0 20 0x1 0x1>;	/* PA30 periph A with pullup */
+					};
+				};
+
+				pioA: gpio@fffff200 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff200 0x200>;
+					interrupts = <2 4 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				pioB: gpio@fffff400 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x200>;
+					interrupts = <3 4 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				pioC: gpio@fffff600 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x200>;
+					interrupts = <4 4 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				pioD: gpio@fffff800 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x200>;
+					interrupts = <5 4 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				pioE: gpio@fffffa00 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffffa00 0x200>;
+					interrupts = <5 4 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
 			};
 
 			dbgu: serial@ffffee00 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xffffee00 0x200>;
 				interrupts = <1 4 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
 				status = "disabled";
 			};
 
@@ -171,6 +354,8 @@
 				interrupts = <7 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart0>;
 				status = "disabled";
 			};
 
@@ -180,6 +365,8 @@
 				interrupts = <8 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1>;
 				status = "disabled";
 			};
 
@@ -189,6 +376,8 @@
 				interrupts = <9 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart2>;
 				status = "disabled";
 			};
 
@@ -198,6 +387,8 @@
 				interrupts = <10 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart3>;
 				status = "disabled";
 			};
 
@@ -205,6 +396,8 @@
 				compatible = "cdns,at32ap7000-macb", "cdns,macb";
 				reg = <0xfffbc000 0x100>;
 				interrupts = <25 4 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb_rmii>;
 				status = "disabled";
 			};
 
@@ -262,6 +455,24 @@
 					trigger-value = <0x6>;
 				};
 			};
+
+			mmc0: mmc@fff80000 {
+				compatible = "atmel,hsmci";
+				reg = <0xfff80000 0x600>;
+				interrupts = <11 4 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			mmc1: mmc@fffd0000 {
+				compatible = "atmel,hsmci";
+				reg = <0xfffd0000 0x600>;
+				interrupts = <29 4 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
 		};
 
 		nand0: nand@40000000 {
@@ -273,6 +484,8 @@
 			      >;
 			atmel,nand-addr-offset = <21>;
 			atmel,nand-cmd-offset = <22>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand>;
 			gpios = <&pioC 8 0
 				 &pioC 14 0
 				 0
diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
index 15e1dd4..20c3191 100644
--- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
+++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
@@ -39,6 +39,10 @@
 			};
 
 			usart1: serial@fff90000 {
+				pinctrl-0 =
+					<&pinctrl_usart1
+					 &pinctrl_usart1_rts
+					 &pinctrl_usart1_cts>;
 				status = "okay";
 			};
 
@@ -54,6 +58,50 @@
 			i2c1: i2c@fff88000 {
 				status = "okay";
 			};
+
+			mmc0: mmc@fff80000 {
+				pinctrl-0 = <
+					&pinctrl_board_mmc0
+					&pinctrl_mmc0_slot0_clk_cmd_dat0
+					&pinctrl_mmc0_slot0_dat1_3>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioD 10 0>;
+				};
+			};
+
+			mmc1: mmc@fffd0000 {
+				pinctrl-0 = <
+					&pinctrl_board_mmc1
+					&pinctrl_mmc1_slot0_clk_cmd_dat0
+					&pinctrl_mmc1_slot0_dat1_3>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioD 11 0>;
+					wp-gpios = <&pioD 29 0>;
+				};
+			};
+
+			pinctrl@fffff200 {
+				mmc0 {
+					pinctrl_board_mmc0: mmc0-board {
+						atmel,pins =
+							<3 10 0x0 0x5>;	/* PD10 gpio CD pin pull up and deglitch */
+					};
+				};
+
+				mmc1 {
+					pinctrl_board_mmc1: mmc1-board {
+						atmel,pins =
+							<3 11 0x0 0x5	/* PD11 gpio CD pin pull up and deglitch */
+							 3 29 0x0 0x1>;	/* PD29 gpio WP pin pull up */
+					};
+				};
+			};
 		};
 
 		nand0: nand@40000000 {
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index 82508d6..e9efb34 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -84,6 +84,15 @@
 				reg = <0xfffffe10 0x10>;
 			};
 
+			mmc0: mmc@f0008000 {
+				compatible = "atmel,hsmci";
+				reg = <0xf0008000 0x600>;
+				interrupts = <12 4 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
 			tcb0: timer@f8008000 {
 				compatible = "atmel,at91sam9x5-tcb";
 				reg = <0xf8008000 0x100>;
@@ -102,50 +111,186 @@
 				interrupts = <20 4 0>;
 			};
 
-			pioA: gpio@fffff400 {
-				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
-				reg = <0xfffff400 0x100>;
-				interrupts = <2 4 1>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
+			pinctrl@fffff400 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
+				ranges = <0xfffff400 0xfffff400 0x800>;
 
-			pioB: gpio@fffff600 {
-				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
-				reg = <0xfffff600 0x100>;
-				interrupts = <2 4 1>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
+				atmel,mux-mask = <
+				      /*    A         B          C     */
+				       0xffffffff 0xffe07983 0x00000000  /* pioA */
+				       0x00040000 0x00047e0f 0x00000000  /* pioB */
+				       0xfdffffff 0x07c00000 0xb83fffff  /* pioC */
+				       0x003fffff 0x003f8000 0x00000000  /* pioD */
+				      >;
 
-			pioC: gpio@fffff800 {
-				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
-				reg = <0xfffff800 0x100>;
-				interrupts = <3 4 1>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
+				/* shared pinctrl settings */
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<0 9 0x1 0x0	/* PA9 periph A */
+							 0 10 0x1 0x1>;	/* PA10 periph with pullup */
+					};
+				};
 
-			pioD: gpio@fffffa00 {
-				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
-				reg = <0xfffffa00 0x100>;
-				interrupts = <3 4 1>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
+				usart0 {
+					pinctrl_usart0: usart0-0 {
+						atmel,pins =
+							<0 1 0x1 0x1	/* PA1 periph A with pullup */
+							 0 0 0x1 0x0>;	/* PA0 periph A */
+					};
+
+					pinctrl_usart0_rts: usart0_rts-0 {
+						atmel,pins =
+							<0 2 0x1 0x0>;	/* PA2 periph A */
+					};
+
+					pinctrl_usart0_cts: usart0_cts-0 {
+						atmel,pins =
+							<0 3 0x1 0x0>;	/* PA3 periph A */
+					};
+				};
+
+				usart1 {
+					pinctrl_usart1: usart1-0 {
+						atmel,pins =
+							<0 6 0x1 0x1	/* PA6 periph A with pullup */
+							 0 5 0x1 0x0>;	/* PA5 periph A */
+					};
+				};
+
+				usart2 {
+					pinctrl_usart2: usart2-0 {
+						atmel,pins =
+							<0 8 0x1 0x1	/* PA8 periph A with pullup */
+							 0 7 0x1 0x0>;	/* PA7 periph A */
+					};
+
+					pinctrl_usart2_rts: usart2_rts-0 {
+						atmel,pins =
+							<1 0 0x2 0x0>;	/* PB0 periph B */
+					};
+
+					pinctrl_usart2_cts: usart2_cts-0 {
+						atmel,pins =
+							<1 1 0x2 0x0>;	/* PB1 periph B */
+					};
+				};
+
+				usart3 {
+					pinctrl_usart3: usart3-0 {
+						atmel,pins =
+							<2 23 0x2 0x1	/* PC23 periph B with pullup */
+							 2 22 0x2 0x0>;	/* PC22 periph B */
+					};
+
+					pinctrl_usart3_rts: usart3_rts-0 {
+						atmel,pins =
+							<2 24 0x2 0x0>;	/* PC24 periph B */
+					};
+
+					pinctrl_usart3_cts: usart3_cts-0 {
+						atmel,pins =
+							<2 25 0x2 0x0>;	/* PC25 periph B */
+					};
+				};
+
+				uart0 {
+					pinctrl_uart0: uart0-0 {
+						atmel,pins =
+							<2 9 0x3 0x1	/* PC9 periph C with pullup */
+							 2 8 0x3 0x0>;	/* PC8 periph C */
+					};
+				};
+
+				uart1 {
+					pinctrl_uart1: uart1-0 {
+						atmel,pins =
+							<2 16 0x3 0x1	/* PC17 periph C with pullup */
+							 2 17 0x3 0x0>;	/* PC16 periph C */
+					};
+				};
+
+				nand {
+					pinctrl_nand: nand-0 {
+						atmel,pins =
+							<3 5 0x0 0x1	/* PD5 gpio RDY pin pull_up*/
+							 3 4 0x0 0x1>;	/* PD4 gpio enable pin pull_up */
+					};
+				};
+
+				mmc0 {
+					pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 {
+						atmel,pins =
+							<0 17 0x1 0x0	/* PA17 periph A */
+							 0 16 0x1 0x1	/* PA16 periph A with pullup */
+							 0 15 0x1 0x1>;	/* PA15 periph A with pullup */
+					};
+
+					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+						atmel,pins =
+							<0 18 0x1 0x1	/* PA18 periph A with pullup */
+							 0 19 0x1 0x1	/* PA19 periph A with pullup */
+							 0 20 0x1 0x1>;	/* PA20 periph A with pullup */
+					};
+
+					pinctrl_mmc0_slot0_dat4_7: mmc0_slot0_dat4_7-0 {
+						atmel,pins =
+							<0 11 0x2 0x1	/* PA11 periph B with pullup */
+							 0 12 0x2 0x1	/* PA12 periph B with pullup */
+							 0 13 0x2 0x1	/* PA13 periph B with pullup */
+							 0 14 0x2 0x1>;	/* PA14 periph B with pullup */
+					};
+				};
+
+				pioA: gpio@fffff400 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x200>;
+					interrupts = <2 4 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				pioB: gpio@fffff600 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x200>;
+					interrupts = <2 4 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				pioC: gpio@fffff800 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x200>;
+					interrupts = <3 4 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				pioD: gpio@fffffa00 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffffa00 0x200>;
+					interrupts = <3 4 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
 			};
 
 			dbgu: serial@fffff200 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffff200 0x200>;
 				interrupts = <1 4 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
 				status = "disabled";
 			};
 
@@ -155,6 +300,8 @@
 				interrupts = <5 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart0>;
 				status = "disabled";
 			};
 
@@ -164,6 +311,8 @@
 				interrupts = <6 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1>;
 				status = "disabled";
 			};
 
@@ -173,6 +322,8 @@
 				interrupts = <7 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart2>;
 				status = "disabled";
 			};
 
@@ -182,6 +333,8 @@
 				interrupts = <8 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart3>;
 				status = "disabled";
 			};
 
@@ -215,6 +368,8 @@
 			       >;
 			atmel,nand-addr-offset = <21>;
 			atmel,nand-cmd-offset = <22>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand>;
 			gpios = <&pioD 5 0
 				 &pioD 4 0
 				 0
diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts
index 912b2c2..0376bf4 100644
--- a/arch/arm/boot/dts/at91sam9n12ek.dts
+++ b/arch/arm/boot/dts/at91sam9n12ek.dts
@@ -45,6 +45,28 @@
 			i2c1: i2c@f8014000 {
 				status = "okay";
 			};
+
+			mmc0: mmc@f0008000 {
+				pinctrl-0 = <
+					&pinctrl_board_mmc0
+					&pinctrl_mmc0_slot0_clk_cmd_dat0
+					&pinctrl_mmc0_slot0_dat1_3>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioA 7 0>;
+				};
+			};
+
+			pinctrl@fffff400 {
+				mmc0 {
+					pinctrl_board_mmc0: mmc0-board {
+						atmel,pins =
+							<0 7 0x0 0x5>;	/* PA7 gpio CD pin pull up and deglitch */
+					};
+				};
+			};
 		};
 
 		nand0: nand@40000000 {
diff --git a/arch/arm/boot/dts/at91sam9x25.dtsi b/arch/arm/boot/dts/at91sam9x25.dtsi
new file mode 100644
index 0000000..54eb33b
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9x25.dtsi
@@ -0,0 +1,49 @@
+/*
+ * at91sam9x25.dtsi - Device Tree Include file for AT91SAM9X25 SoC
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+/include/ "at91sam9x5.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9X25 SoC";
+	compatible = "atmel, at91sam9x25, atmel,at91sam9x5";
+
+	ahb {
+		apb {
+			pinctrl@fffff400 {
+				atmel,mux-mask = <
+				      /*    A         B          C     */
+				       0xffffffff 0xffe03fff 0xc000001c  /* pioA */
+				       0x0007ffff 0x00047e3f 0x00000000  /* pioB */
+				       0x80000000 0xfffd0000 0xb83fffff  /* pioC */
+				       0x003fffff 0x003f8000 0x00000000  /* pioD */
+				      >;
+
+				macb1 {
+					pinctrl_macb1_rmii: macb1_rmii-0 {
+						atmel,pins =
+							<2 16 0x2 0x0	/* PC16 periph B */
+							 2 18 0x2 0x0	/* PC18 periph B */
+							 2 19 0x2 0x0	/* PC19 periph B */
+							 2 20 0x2 0x0	/* PC20 periph B */
+							 2 21 0x2 0x0	/* PC21 periph B */
+							 2 27 0x2 0x0	/* PC27 periph B */
+							 2 28 0x2 0x0	/* PC28 periph B */
+							 2 29 0x2 0x0	/* PC29 periph B */
+							 2 30 0x2 0x0	/* PC30 periph B */
+							 2 31 0x2 0x0>;	/* PC31 periph B */
+					};
+				};
+			};
+
+			macb1: ethernet@f8030000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb1_rmii>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9x25ek.dts b/arch/arm/boot/dts/at91sam9x25ek.dts
new file mode 100644
index 0000000..af907ea
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9x25ek.dts
@@ -0,0 +1,16 @@
+/*
+ * at91sam9x25ek.dts - Device Tree file for AT91SAM9X25-EK board
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+/include/ "at91sam9x25.dtsi"
+/include/ "at91sam9x5ek.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9G25-EK";
+	compatible = "atmel,at91sam9x25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+};
diff --git a/arch/arm/boot/dts/at91sam9x35.dtsi b/arch/arm/boot/dts/at91sam9x35.dtsi
new file mode 100644
index 0000000..fb102d6
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9x35.dtsi
@@ -0,0 +1,28 @@
+/*
+ * at91sam9x35.dtsi - Device Tree Include file for AT91SAM9X35 SoC
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+/include/ "at91sam9x5.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9X35 SoC";
+	compatible = "atmel, at91sam9x35, atmel,at91sam9x5";
+
+	ahb {
+		apb {
+			pinctrl@fffff400 {
+				atmel,mux-mask = <
+				      /*    A         B          C     */
+				       0xffffffff 0xffe03fff 0xc000000c  /* pioA */
+				       0x000406ff 0x00047e3f 0x00000000  /* pioB */
+				       0xfdffffff 0x00000000 0xb83fffff  /* pioC */
+				       0x003fffff 0x003f8000 0x00000000  /* pioD */
+				      >;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9x35ek.dts b/arch/arm/boot/dts/at91sam9x35ek.dts
new file mode 100644
index 0000000..5ccb607
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9x35ek.dts
@@ -0,0 +1,16 @@
+/*
+ * at91sam9x35ek.dts - Device Tree file for AT91SAM9X35-EK board
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+/include/ "at91sam9x35.dtsi"
+/include/ "at91sam9x5ek.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9X35-EK";
+	compatible = "atmel,at91sam9x35ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+};
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 03fc136..7ee49e8d 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -111,50 +111,244 @@
 				interrupts = <21 4 0>;
 			};
 
-			pioA: gpio@fffff400 {
-				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
-				reg = <0xfffff400 0x100>;
-				interrupts = <2 4 1>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
+			pinctrl@fffff400 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
+				ranges = <0xfffff400 0xfffff400 0x800>;
+
+				/* shared pinctrl settings */
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<0 9 0x1 0x0	/* PA9 periph A */
+							 0 10 0x1 0x1>;	/* PA10 periph A with pullup */
+					};
+				};
+
+				usart0 {
+					pinctrl_usart0: usart0-0 {
+						atmel,pins =
+							<0 0 0x1 0x1	/* PA0 periph A with pullup */
+							 0 1 0x1 0x0>;	/* PA1 periph A */
+					};
+
+					pinctrl_usart0_rts: usart0_rts-0 {
+						atmel,pins =
+							<0 2 0x1 0x0>;	/* PA2 periph A */
+					};
+
+					pinctrl_usart0_cts: usart0_cts-0 {
+						atmel,pins =
+							<0 3 0x1 0x0>;	/* PA3 periph A */
+					};
+				};
+
+				usart1 {
+					pinctrl_usart1: usart1-0 {
+						atmel,pins =
+							<0 5 0x1 0x1	/* PA5 periph A with pullup */
+							 0 6 0x1 0x0>;	/* PA6 periph A */
+					};
+
+					pinctrl_usart1_rts: usart1_rts-0 {
+						atmel,pins =
+							<3 27 0x3 0x0>;	/* PC27 periph C */
+					};
+
+					pinctrl_usart1_cts: usart1_cts-0 {
+						atmel,pins =
+							<3 28 0x3 0x0>;	/* PC28 periph C */
+					};
+				};
+
+				usart2 {
+					pinctrl_usart2: usart2-0 {
+						atmel,pins =
+							<0 7 0x1 0x1	/* PA7 periph A with pullup */
+							 0 8 0x1 0x0>;	/* PA8 periph A */
+					};
+
+					pinctrl_uart2_rts: uart2_rts-0 {
+						atmel,pins =
+							<0 0 0x2 0x0>;	/* PB0 periph B */
+					};
+
+					pinctrl_uart2_cts: uart2_cts-0 {
+						atmel,pins =
+							<0 1 0x2 0x0>;	/* PB1 periph B */
+					};
+				};
+
+				usart3 {
+					pinctrl_uart3: usart3-0 {
+						atmel,pins =
+							<3 23 0x2 0x1	/* PC22 periph B with pullup */
+							 3 23 0x2 0x0>;	/* PC23 periph B */
+					};
+
+					pinctrl_usart3_rts: usart3_rts-0 {
+						atmel,pins =
+							<3 24 0x2 0x0>;	/* PC24 periph B */
+					};
+
+					pinctrl_usart3_cts: usart3_cts-0 {
+						atmel,pins =
+							<3 25 0x2 0x0>;	/* PC25 periph B */
+					};
+				};
+
+				uart0 {
+					pinctrl_uart0: uart0-0 {
+						atmel,pins =
+							<3 8 0x3 0x0	/* PC8 periph C */
+							 3 9 0x3 0x1>;	/* PC9 periph C with pullup */
+					};
+				};
+
+				uart1 {
+					pinctrl_uart1: uart1-0 {
+						atmel,pins =
+							<3 16 0x3 0x0	/* PC16 periph C */
+							 3 17 0x3 0x1>;	/* PC17 periph C with pullup */
+					};
+				};
+
+				nand {
+					pinctrl_nand: nand-0 {
+						atmel,pins =
+							<3 4 0x0 0x1	/* PD5 gpio RDY pin pull_up */
+							 3 5 0x0 0x1>;	/* PD4 gpio enable pin pull_up */
+					};
+				};
+
+				macb0 {
+					pinctrl_macb0_rmii: macb0_rmii-0 {
+						atmel,pins =
+							<1 0 0x1 0x0	/* PB0 periph A */
+							 1 1 0x1 0x0	/* PB1 periph A */
+							 1 2 0x1 0x0	/* PB2 periph A */
+							 1 3 0x1 0x0	/* PB3 periph A */
+							 1 4 0x1 0x0	/* PB4 periph A */
+							 1 5 0x1 0x0	/* PB5 periph A */
+							 1 6 0x1 0x0	/* PB6 periph A */
+							 1 7 0x1 0x0	/* PB7 periph A */
+							 1 9 0x1 0x0	/* PB9 periph A */
+							 1 10 0x1 0x0>;	/* PB10 periph A */
+					};
+
+					pinctrl_macb0_rmii_mii: macb0_rmii_mii-0 {
+						atmel,pins =
+							<1 8 0x1 0x0	/* PA8 periph A */
+							 1 11 0x1 0x0	/* PA11 periph A */
+							 1 12 0x1 0x0	/* PA12 periph A */
+							 1 13 0x1 0x0	/* PA13 periph A */
+							 1 14 0x1 0x0	/* PA14 periph A */
+							 1 15 0x1 0x0	/* PA15 periph A */
+							 1 16 0x1 0x0	/* PA16 periph A */
+							 1 17 0x1 0x0>;	/* PA17 periph A */
+					};
+				};
+
+				mmc0 {
+					pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 {
+						atmel,pins =
+							<0 17 0x1 0x0	/* PA17 periph A */
+							 0 16 0x1 0x1	/* PA16 periph A with pullup */
+							 0 15 0x1 0x1>;	/* PA15 periph A with pullup */
+					};
+
+					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+						atmel,pins =
+							<0 18 0x1 0x1	/* PA18 periph A with pullup */
+							 0 19 0x1 0x1	/* PA19 periph A with pullup */
+							 0 20 0x1 0x1>;	/* PA20 periph A with pullup */
+					};
+				};
+
+				mmc1 {
+					pinctrl_mmc1_slot0_clk_cmd_dat0: mmc1_slot0_clk_cmd_dat0-0 {
+						atmel,pins =
+							<0 13 0x2 0x0	/* PA13 periph B */
+							 0 12 0x2 0x1	/* PA12 periph B with pullup */
+							 0 11 0x2 0x1>;	/* PA11 periph B with pullup */
+					};
+
+					pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 {
+						atmel,pins =
+							<0 2 0x2 0x1	/* PA2 periph B with pullup */
+							 0 3 0x2 0x1	/* PA3 periph B with pullup */
+							 0 4 0x2 0x1>;	/* PA4 periph B with pullup */
+					};
+				};
+
+				pioA: gpio@fffff400 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x200>;
+					interrupts = <2 4 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				pioB: gpio@fffff600 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x200>;
+					interrupts = <2 4 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					#gpio-lines = <19>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				pioC: gpio@fffff800 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x200>;
+					interrupts = <3 4 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				pioD: gpio@fffffa00 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffffa00 0x200>;
+					interrupts = <3 4 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					#gpio-lines = <22>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
 			};
 
-			pioB: gpio@fffff600 {
-				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
-				reg = <0xfffff600 0x100>;
-				interrupts = <2 4 1>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
+			mmc0: mmc@f0008000 {
+				compatible = "atmel,hsmci";
+				reg = <0xf0008000 0x600>;
+				interrupts = <12 4 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
 			};
 
-			pioC: gpio@fffff800 {
-				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
-				reg = <0xfffff800 0x100>;
-				interrupts = <3 4 1>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			pioD: gpio@fffffa00 {
-				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
-				reg = <0xfffffa00 0x100>;
-				interrupts = <3 4 1>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
+			mmc1: mmc@f000c000 {
+				compatible = "atmel,hsmci";
+				reg = <0xf000c000 0x600>;
+				interrupts = <26 4 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
 			};
 
 			dbgu: serial@fffff200 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffff200 0x200>;
 				interrupts = <1 4 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
 				status = "disabled";
 			};
 
@@ -164,6 +358,8 @@
 				interrupts = <5 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart0>;
 				status = "disabled";
 			};
 
@@ -173,6 +369,8 @@
 				interrupts = <6 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1>;
 				status = "disabled";
 			};
 
@@ -182,6 +380,8 @@
 				interrupts = <7 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart2>;
 				status = "disabled";
 			};
 
@@ -189,6 +389,8 @@
 				compatible = "cdns,at32ap7000-macb", "cdns,macb";
 				reg = <0xf802c000 0x100>;
 				interrupts = <24 4 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb0_rmii>;
 				status = "disabled";
 			};
 
@@ -273,6 +475,8 @@
 			      >;
 			atmel,nand-addr-offset = <21>;
 			atmel,nand-cmd-offset = <22>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand>;
 			gpios = <&pioD 5 0
 				 &pioD 4 0
 				 0
diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi
new file mode 100644
index 0000000..8a7cf1d
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi
@@ -0,0 +1,101 @@
+/*
+ * at91sam9x5ek.dtsi - Device Tree file for AT91SAM9x5CM Base board
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/include/ "at91sam9x5cm.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9X5-EK";
+	compatible = "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "128M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
+	};
+
+	ahb {
+		apb {
+			mmc0: mmc@f0008000 {
+				pinctrl-0 = <
+					&pinctrl_board_mmc0
+					&pinctrl_mmc0_slot0_clk_cmd_dat0
+					&pinctrl_mmc0_slot0_dat1_3>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioD 15 0>;
+				};
+			};
+
+			mmc1: mmc@f000c000 {
+				pinctrl-0 = <
+					&pinctrl_board_mmc1
+					&pinctrl_mmc1_slot0_clk_cmd_dat0
+					&pinctrl_mmc1_slot0_dat1_3>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioD 14 0>;
+				};
+			};
+
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			usart0: serial@f801c000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@f802c000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			i2c0: i2c@f8010000 {
+				status = "okay";
+			};
+
+			i2c1: i2c@f8014000 {
+				status = "okay";
+			};
+
+			i2c2: i2c@f8018000 {
+				status = "okay";
+			};
+
+			pinctrl@fffff400 {
+				mmc0 {
+					pinctrl_board_mmc0: mmc0-board {
+						atmel,pins =
+							<3 15 0x0 0x5>;	/* PD15 gpio CD pin pull up and deglitch */
+					};
+				};
+
+				mmc1 {
+					pinctrl_board_mmc1: mmc1-board {
+						atmel,pins =
+							<3 14 0x0 0x5>;	/* PD14 gpio CD pin pull up and deglitch */
+					};
+				};
+			};
+		};
+
+		usb0: ohci@00600000 {
+			status = "okay";
+			num-ports = <2>;
+			atmel,vbus-gpio = <&pioD 19 1
+					   &pioD 20 1
+					  >;
+		};
+
+		usb1: ehci@00700000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/pm9g45.dts b/arch/arm/boot/dts/pm9g45.dts
new file mode 100644
index 0000000..387fedb
--- /dev/null
+++ b/arch/arm/boot/dts/pm9g45.dts
@@ -0,0 +1,165 @@
+/*
+ * pm9g45.dts - Device Tree file for Ronetix pm9g45 board
+ *
+ *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+/dts-v1/;
+/include/ "at91sam9g45.dtsi"
+
+/ {
+	model = "Ronetix pm9g45";
+	compatible = "ronetix,pm9g45", "atmel,at91sam9g45", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory {
+		reg = <0x70000000 0x8000000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		main_clock: clock@0 {
+			compatible = "atmel,osc", "fixed-clock";
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			dbgu: serial@ffffee00 {
+				status = "okay";
+			};
+
+			pinctrl@fffff200 {
+
+				board {
+					pinctrl_board_nand: nand0-board {
+						atmel,pins =
+							<3 3 0x0 0x1	/* PD3 gpio RDY pin pull_up*/
+							 2 14 0x0 0x1>;	/* PC14 gpio enable pin pull_up */
+					};
+				};
+
+				mmc {
+					pinctrl_board_mmc: mmc0-board {
+						atmel,pins =
+							<3 6 0x0 0x5>;	/* PD6 gpio CD pin pull_up and deglitch */
+					};
+				};
+			};
+
+			mmc0: mmc@fff80000 {
+				pinctrl-0 = <
+					&pinctrl_board_mmc
+					&pinctrl_mmc0_slot0_clk_cmd_dat0
+					&pinctrl_mmc0_slot0_dat1_3>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioD 6 0>;
+				};
+			};
+
+			macb0: ethernet@fffbc000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+		};
+
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "soft";
+			nand-on-flash-bbt;
+			pinctrl-0 = <&pinctrl_board_nand>;
+
+			gpios = <&pioD 3 0
+				 &pioC 14 0
+				 0
+				>;
+
+			status = "okay";
+
+			at91bootstrap@0 {
+				label = "at91bootstrap";
+				reg = <0x0 0x20000>;
+			};
+
+			barebox@20000 {
+				label = "barebox";
+				reg = <0x20000 0x40000>;
+			};
+
+			bareboxenv@60000 {
+				label = "bareboxenv";
+				reg = <0x60000 0x1A0000>;
+			};
+
+			kernel@200000 {
+				label = "bareboxenv2";
+				reg = <0x200000 0x300000>;
+			};
+
+			kernel@500000 {
+				label = "root";
+				reg = <0x500000 0x400000>;
+			};
+
+			data@900000 {
+				label = "data";
+				reg = <0x900000 0x8340000>;
+			};
+		};
+
+		usb0: ohci@00700000 {
+			status = "okay";
+			num-ports = <2>;
+		};
+
+		usb1: ehci@00800000 {
+			status = "okay";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			label = "led0";
+			gpios = <&pioD 0 1>;
+			linux,default-trigger = "nand-disk";
+		};
+
+		led1 {
+			label = "led1";
+			gpios = <&pioD 31 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		right {
+			label = "SW4";
+			gpios = <&pioE 7 1>;
+			linux,code = <106>;
+		};
+
+		up {
+			label = "SW3";
+			gpios = <&pioE 8 1>;
+			linux,code = <103>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts
index dd4358b..2e4c572 100644
--- a/arch/arm/boot/dts/spear1310-evb.dts
+++ b/arch/arm/boot/dts/spear1310-evb.dts
@@ -181,6 +181,10 @@
 			       status = "okay";
 			};
 
+			gpio@d8400000 {
+			       status = "okay";
+			};
+
 			i2c0: i2c@e0280000 {
 			       status = "okay";
 			};
diff --git a/arch/arm/boot/dts/spear1310.dtsi b/arch/arm/boot/dts/spear1310.dtsi
index 419ea74..7cd25eb 100644
--- a/arch/arm/boot/dts/spear1310.dtsi
+++ b/arch/arm/boot/dts/spear1310.dtsi
@@ -70,6 +70,12 @@
 			status = "disabled";
 		};
 
+		pinmux: pinmux@e0700000 {
+			compatible = "st,spear1310-pinmux";
+			reg = <0xe0700000 0x1000>;
+			#gpio-range-cells = <2>;
+		};
+
 		spi1: spi@5d400000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x5d400000 0x1000>;
@@ -179,6 +185,27 @@
 			thermal@e07008c4 {
 				st,thermal-flags = <0x7000>;
 			};
+
+			gpiopinctrl: gpio@d8400000 {
+				compatible = "st,spear-plgpio";
+				reg = <0xd8400000 0x1000>;
+				interrupts = <0 100 0x4>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-ranges = <&pinmux 0 246>;
+				status = "disabled";
+
+				st-plgpio,ngpio = <246>;
+				st-plgpio,enb-reg = <0xd0>;
+				st-plgpio,wdata-reg = <0x90>;
+				st-plgpio,dir-reg = <0xb0>;
+				st-plgpio,ie-reg = <0x30>;
+				st-plgpio,rdata-reg = <0x70>;
+				st-plgpio,mis-reg = <0x10>;
+				st-plgpio,eit-reg = <0x50>;
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/spear1340-evb.dts b/arch/arm/boot/dts/spear1340-evb.dts
index c9a54e0..045f712 100644
--- a/arch/arm/boot/dts/spear1340-evb.dts
+++ b/arch/arm/boot/dts/spear1340-evb.dts
@@ -193,6 +193,10 @@
 			       status = "okay";
 			};
 
+			gpio@e2800000 {
+			       status = "okay";
+			};
+
 			i2c0: i2c@e0280000 {
 			       status = "okay";
 			};
diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi
index d71fe2a..6c09eb0 100644
--- a/arch/arm/boot/dts/spear1340.dtsi
+++ b/arch/arm/boot/dts/spear1340.dtsi
@@ -24,6 +24,12 @@
 			status = "disabled";
 		};
 
+		pinmux: pinmux@e0700000 {
+			compatible = "st,spear1340-pinmux";
+			reg = <0xe0700000 0x1000>;
+			#gpio-range-cells = <2>;
+		};
+
 		spi1: spi@5d400000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x5d400000 0x1000>;
@@ -51,6 +57,26 @@
 			thermal@e07008c4 {
 				st,thermal-flags = <0x2a00>;
 			};
+
+			gpiopinctrl: gpio@e2800000 {
+				compatible = "st,spear-plgpio";
+				reg = <0xe2800000 0x1000>;
+				interrupts = <0 107 0x4>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-ranges = <&pinmux 0 252>;
+				status = "disabled";
+
+				st-plgpio,ngpio = <250>;
+				st-plgpio,wdata-reg = <0x40>;
+				st-plgpio,dir-reg = <0x00>;
+				st-plgpio,ie-reg = <0x80>;
+				st-plgpio,rdata-reg = <0x20>;
+				st-plgpio,mis-reg = <0xa0>;
+				st-plgpio,eit-reg = <0x60>;
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/spear310.dtsi b/arch/arm/boot/dts/spear310.dtsi
index 62fc4fb..930303e 100644
--- a/arch/arm/boot/dts/spear310.dtsi
+++ b/arch/arm/boot/dts/spear310.dtsi
@@ -22,9 +22,10 @@
 			  0xb0000000 0xb0000000 0x10000000
 			  0xd0000000 0xd0000000 0x30000000>;
 
-		pinmux@b4000000 {
+		pinmux: pinmux@b4000000 {
 			compatible = "st,spear310-pinmux";
 			reg = <0xb4000000 0x1000>;
+			#gpio-range-cells = <2>;
 		};
 
 		fsmc: flash@44000000 {
@@ -75,6 +76,25 @@
 				reg = <0xb2200000 0x1000>;
 				status = "disabled";
 			};
+
+			gpiopinctrl: gpio@b4000000 {
+				compatible = "st,spear-plgpio";
+				reg = <0xb4000000 0x1000>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-ranges = <&pinmux 0 102>;
+				status = "disabled";
+
+				st-plgpio,ngpio = <102>;
+				st-plgpio,enb-reg = <0x10>;
+				st-plgpio,wdata-reg = <0x20>;
+				st-plgpio,dir-reg = <0x30>;
+				st-plgpio,ie-reg = <0x50>;
+				st-plgpio,rdata-reg = <0x40>;
+				st-plgpio,mis-reg = <0x60>;
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/spear320-evb.dts b/arch/arm/boot/dts/spear320-evb.dts
index 082328b..ad4bfc6 100644
--- a/arch/arm/boot/dts/spear320-evb.dts
+++ b/arch/arm/boot/dts/spear320-evb.dts
@@ -164,6 +164,10 @@
 			       status = "okay";
 			};
 
+			gpio@b3000000 {
+			       status = "okay";
+			};
+
 			i2c0: i2c@d0180000 {
 			       status = "okay";
 			};
diff --git a/arch/arm/boot/dts/spear320.dtsi b/arch/arm/boot/dts/spear320.dtsi
index 1f49d69..67d7ada 100644
--- a/arch/arm/boot/dts/spear320.dtsi
+++ b/arch/arm/boot/dts/spear320.dtsi
@@ -21,9 +21,10 @@
 		ranges = <0x40000000 0x40000000 0x80000000
 			  0xd0000000 0xd0000000 0x30000000>;
 
-		pinmux@b3000000 {
+		pinmux: pinmux@b3000000 {
 			compatible = "st,spear320-pinmux";
 			reg = <0xb3000000 0x1000>;
+			#gpio-range-cells = <2>;
 		};
 
 		clcd@90000000 {
@@ -90,6 +91,26 @@
 				reg = <0xa4000000 0x1000>;
 				status = "disabled";
 			};
+
+			gpiopinctrl: gpio@b3000000 {
+				compatible = "st,spear-plgpio";
+				reg = <0xb3000000 0x1000>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-ranges = <&pinmux 0 102>;
+				status = "disabled";
+
+				st-plgpio,ngpio = <102>;
+				st-plgpio,enb-reg = <0x24>;
+				st-plgpio,wdata-reg = <0x34>;
+				st-plgpio,dir-reg = <0x44>;
+				st-plgpio,ie-reg = <0x64>;
+				st-plgpio,rdata-reg = <0x54>;
+				st-plgpio,mis-reg = <0x84>;
+				st-plgpio,eit-reg = <0x94>;
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts
index f0ba901..a20d4ff 100644
--- a/arch/arm/boot/dts/tegra20-seaboard.dts
+++ b/arch/arm/boot/dts/tegra20-seaboard.dts
@@ -523,12 +523,12 @@
 		};
 
 		temperature-sensor@4c {
-			compatible = "nct1008";
+			compatible = "onnn,nct1008";
 			reg = <0x4c>;
 		};
 
 		magnetometer@c {
-			compatible = "ak8975";
+			compatible = "ak,ak8975";
 			reg = <0xc>;
 			interrupt-parent = <&gpio>;
 			interrupts = <109 0x04>; /* gpio PN5 */
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index b1497c7..df7f227 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -73,8 +73,8 @@
 
 	pinmux: pinmux {
 		compatible = "nvidia,tegra30-pinmux";
-		reg = <0x70000868 0xd0    /* Pad control registers */
-		       0x70003000 0x3e0>; /* Mux registers */
+		reg = <0x70000868 0xd4    /* Pad control registers */
+		       0x70003000 0x3e4>; /* Mux registers */
 	};
 
 	serial@70006000 {
diff --git a/arch/arm/common/timer-sp.c b/arch/arm/common/timer-sp.c
index df13a3f..9d2d3ba 100644
--- a/arch/arm/common/timer-sp.c
+++ b/arch/arm/common/timer-sp.c
@@ -162,7 +162,6 @@
 	.set_mode	= sp804_set_mode,
 	.set_next_event	= sp804_set_next_event,
 	.rating		= 300,
-	.cpumask	= cpu_all_mask,
 };
 
 static struct irqaction sp804_timer_irq = {
@@ -185,6 +184,7 @@
 	clkevt_reload = DIV_ROUND_CLOSEST(rate, HZ);
 	evt->name = name;
 	evt->irq = irq;
+	evt->cpumask = cpu_possible_mask;
 
 	setup_irq(irq, &sp804_timer_irq);
 	clockevents_config_and_register(evt, rate, 0xf, 0xffffffff);
diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig
index 67bc571..b175577 100644
--- a/arch/arm/configs/at91_dt_defconfig
+++ b/arch/arm/configs/at91_dt_defconfig
@@ -111,6 +111,7 @@
 CONFIG_I2C_GPIO=y
 CONFIG_SPI=y
 CONFIG_SPI_ATMEL=y
+CONFIG_PINCTRL_AT91=y
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_AT91SAM9X_WATCHDOG=y
diff --git a/arch/arm/include/asm/hardware/sp810.h b/arch/arm/include/asm/hardware/sp810.h
index 6b9b077..afd7e91 100644
--- a/arch/arm/include/asm/hardware/sp810.h
+++ b/arch/arm/include/asm/hardware/sp810.h
@@ -56,6 +56,8 @@
 #define SCCTRL_TIMEREN1SEL_REFCLK	(0 << 17)
 #define SCCTRL_TIMEREN1SEL_TIMCLK	(1 << 17)
 
+#define SCCTRL_TIMERENnSEL_SHIFT(n)	(15 + ((n) * 2))
+
 static inline void sysctl_soft_reset(void __iomem *base)
 {
 	/* switch to slow mode */
diff --git a/arch/arm/include/asm/prom.h b/arch/arm/include/asm/prom.h
index aeae9c6..6d65ba2 100644
--- a/arch/arm/include/asm/prom.h
+++ b/arch/arm/include/asm/prom.h
@@ -11,6 +11,8 @@
 #ifndef __ASMARM_PROM_H
 #define __ASMARM_PROM_H
 
+#define HAVE_ARCH_DEVTREE_FIXUPS
+
 #ifdef CONFIG_OF
 
 extern struct machine_desc *setup_machine_fdt(unsigned int dt_phys);
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 0436242..e34c1bd 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -494,8 +494,17 @@
 
 comment "Generic Board Type"
 
+config MACH_AT91RM9200_DT
+	bool "Atmel AT91RM9200 Evaluation Kits with device-tree support"
+	depends on SOC_AT91RM9200
+	select USE_OF
+	help
+	  Select this if you want to experiment device-tree with
+	  an Atmel RM9200 Evaluation Kit.
+
 config MACH_AT91SAM_DT
 	bool "Atmel AT91SAM Evaluation Kits with device-tree support"
+	depends on SOC_AT91SAM9
 	select USE_OF
 	help
 	  Select this if you want to experiment device-tree with
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 3bb7a51..b38a1dc 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -88,6 +88,7 @@
 obj-$(CONFIG_MACH_AT91SAM9M10G45EK) += board-sam9m10g45ek.o
 
 # AT91SAM board with device-tree
+obj-$(CONFIG_MACH_AT91RM9200_DT) += board-rm9200-dt.o
 obj-$(CONFIG_MACH_AT91SAM_DT) += board-dt.o
 
 # AT91X40 board-specific support
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index 5269825..6cceb42 100644
--- a/arch/arm/mach-at91/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -194,6 +194,24 @@
 	CLKDEV_CON_ID("pioB", &pioB_clk),
 	CLKDEV_CON_ID("pioC", &pioC_clk),
 	CLKDEV_CON_ID("pioD", &pioD_clk),
+	/* usart lookup table for DT entries */
+	CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck),
+	CLKDEV_CON_DEV_ID("usart", "fffc0000.serial", &usart0_clk),
+	CLKDEV_CON_DEV_ID("usart", "fffc4000.serial", &usart1_clk),
+	CLKDEV_CON_DEV_ID("usart", "fffc8000.serial", &usart2_clk),
+	CLKDEV_CON_DEV_ID("usart", "fffcc000.serial", &usart3_clk),
+	/* tc lookup table for DT entries */
+	CLKDEV_CON_DEV_ID("t0_clk", "fffa0000.timer", &tc0_clk),
+	CLKDEV_CON_DEV_ID("t1_clk", "fffa0000.timer", &tc1_clk),
+	CLKDEV_CON_DEV_ID("t2_clk", "fffa0000.timer", &tc2_clk),
+	CLKDEV_CON_DEV_ID("t0_clk", "fffa4000.timer", &tc3_clk),
+	CLKDEV_CON_DEV_ID("t1_clk", "fffa4000.timer", &tc4_clk),
+	CLKDEV_CON_DEV_ID("t2_clk", "fffa4000.timer", &tc5_clk),
+	CLKDEV_CON_DEV_ID("hclk", "300000.ohci", &ohci_clk),
+	CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioA_clk),
+	CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioB_clk),
+	CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioC_clk),
+	CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioD_clk),
 };
 
 static struct clk_lookup usart_clocks_lookups[] = {
@@ -361,10 +379,10 @@
 	0	/* Advanced Interrupt Controller (IRQ6) */
 };
 
-struct at91_init_soc __initdata at91rm9200_soc = {
+AT91_SOC_START(rm9200)
 	.map_io = at91rm9200_map_io,
 	.default_irq_priority = at91rm9200_default_irq_priority,
 	.ioremap_registers = at91rm9200_ioremap_registers,
 	.register_clocks = at91rm9200_register_clocks,
 	.init = at91rm9200_initialize,
-};
+AT91_SOC_END
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index 1e122bc..3cee0e6 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -68,7 +68,7 @@
 
 	/* Enable overcurrent notification */
 	for (i = 0; i < data->ports; i++) {
-		if (data->overcurrent_pin[i])
+		if (gpio_is_valid(data->overcurrent_pin[i]))
 			at91_set_gpio_input(data->overcurrent_pin[i], 1);
 	}
 
diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c
index aaa443b..cafe988 100644
--- a/arch/arm/mach-at91/at91rm9200_time.c
+++ b/arch/arm/mach-at91/at91rm9200_time.c
@@ -24,6 +24,9 @@
 #include <linux/irq.h>
 #include <linux/clockchips.h>
 #include <linux/export.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 
 #include <asm/mach/time.h>
 
@@ -91,7 +94,8 @@
 static struct irqaction at91rm9200_timer_irq = {
 	.name		= "at91_tick",
 	.flags		= IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= at91rm9200_timer_interrupt
+	.handler	= at91rm9200_timer_interrupt,
+	.irq		= NR_IRQS_LEGACY + AT91_ID_SYS,
 };
 
 static cycle_t read_clk32k(struct clocksource *cs)
@@ -179,8 +183,60 @@
 void __iomem *at91_st_base;
 EXPORT_SYMBOL_GPL(at91_st_base);
 
+#ifdef CONFIG_OF
+static struct of_device_id at91rm9200_st_timer_ids[] = {
+	{ .compatible = "atmel,at91rm9200-st" },
+	{ /* sentinel */ }
+};
+
+static int __init of_at91rm9200_st_init(void)
+{
+	struct device_node *np;
+	int ret;
+
+	np = of_find_matching_node(NULL, at91rm9200_st_timer_ids);
+	if (!np)
+		goto err;
+
+	at91_st_base = of_iomap(np, 0);
+	if (!at91_st_base)
+		goto node_err;
+
+	/* Get the interrupts property */
+	ret = irq_of_parse_and_map(np, 0);
+	if (!ret)
+		goto ioremap_err;
+	at91rm9200_timer_irq.irq = ret;
+
+	of_node_put(np);
+
+	return 0;
+
+ioremap_err:
+	iounmap(at91_st_base);
+node_err:
+	of_node_put(np);
+err:
+	return -EINVAL;
+}
+#else
+static int __init of_at91rm9200_st_init(void)
+{
+	return -EINVAL;
+}
+#endif
+
 void __init at91rm9200_ioremap_st(u32 addr)
 {
+#ifdef CONFIG_OF
+	struct device_node *np;
+
+	np = of_find_matching_node(NULL, at91rm9200_st_timer_ids);
+	if (np) {
+		of_node_put(np);
+		return;
+	}
+#endif
 	at91_st_base = ioremap(addr, 256);
 	if (!at91_st_base)
 		panic("Impossible to ioremap ST\n");
@@ -191,13 +247,16 @@
  */
 void __init at91rm9200_timer_init(void)
 {
+	/* For device tree enabled device: initialize here */
+	of_at91rm9200_st_init();
+
 	/* Disable all timer interrupts, and clear any pending ones */
 	at91_st_write(AT91_ST_IDR,
 		AT91_ST_PITS | AT91_ST_WDOVF | AT91_ST_RTTINC | AT91_ST_ALMS);
 	at91_st_read(AT91_ST_SR);
 
 	/* Make IRQs happen for the system timer */
-	setup_irq(NR_IRQS_LEGACY + AT91_ID_SYS, &at91rm9200_timer_irq);
+	setup_irq(at91rm9200_timer_irq.irq, &at91rm9200_timer_irq);
 
 	/* The 32KiHz "Slow Clock" (tick every 30517.58 nanoseconds) is used
 	 * directly for the clocksource and all clockevents, after adjusting
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index f820261..c9e029e 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -230,11 +230,15 @@
 	CLKDEV_CON_DEV_ID("t1_clk", "fffdc000.timer", &tc4_clk),
 	CLKDEV_CON_DEV_ID("t2_clk", "fffdc000.timer", &tc5_clk),
 	CLKDEV_CON_DEV_ID("hclk", "500000.ohci", &ohci_clk),
+	CLKDEV_CON_DEV_ID("mci_clk", "fffa8000.mmc", &mmc_clk),
 	/* fake hclk clock */
 	CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
 	CLKDEV_CON_ID("pioA", &pioA_clk),
 	CLKDEV_CON_ID("pioB", &pioB_clk),
 	CLKDEV_CON_ID("pioC", &pioC_clk),
+	CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioA_clk),
+	CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioB_clk),
+	CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioC_clk),
 };
 
 static struct clk_lookup usart_clocks_lookups[] = {
@@ -390,10 +394,10 @@
 	0,	/* Advanced Interrupt Controller */
 };
 
-struct at91_init_soc __initdata at91sam9260_soc = {
+AT91_SOC_START(sam9260)
 	.map_io = at91sam9260_map_io,
 	.default_irq_priority = at91sam9260_default_irq_priority,
 	.ioremap_registers = at91sam9260_ioremap_registers,
 	.register_clocks = at91sam9260_register_clocks,
 	.init = at91sam9260_initialize,
-};
+AT91_SOC_END
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index aa1e587..414bd85 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -72,7 +72,7 @@
 
 	/* Enable overcurrent notification */
 	for (i = 0; i < data->ports; i++) {
-		if (data->overcurrent_pin[i])
+		if (gpio_is_valid(data->overcurrent_pin[i]))
 			at91_set_gpio_input(data->overcurrent_pin[i], 1);
 	}
 
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index 04295c0..4d262f3 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -334,10 +334,10 @@
 	0,	/* Advanced Interrupt Controller */
 };
 
-struct at91_init_soc __initdata at91sam9261_soc = {
+AT91_SOC_START(sam9261)
 	.map_io = at91sam9261_map_io,
 	.default_irq_priority = at91sam9261_default_irq_priority,
 	.ioremap_registers = at91sam9261_ioremap_registers,
 	.register_clocks = at91sam9261_register_clocks,
 	.init = at91sam9261_initialize,
-};
+AT91_SOC_END
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index b948769..cd604aa 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -72,7 +72,7 @@
 
 	/* Enable overcurrent notification */
 	for (i = 0; i < data->ports; i++) {
-		if (data->overcurrent_pin[i])
+		if (gpio_is_valid(data->overcurrent_pin[i]))
 			at91_set_gpio_input(data->overcurrent_pin[i], 1);
 	}
 
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index d6f9c23..ed390f6 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -211,7 +211,14 @@
 	CLKDEV_CON_DEV_ID("hclk", "a00000.ohci", &ohci_clk),
 	CLKDEV_CON_DEV_ID("spi_clk", "fffa4000.spi", &spi0_clk),
 	CLKDEV_CON_DEV_ID("spi_clk", "fffa8000.spi", &spi1_clk),
+	CLKDEV_CON_DEV_ID("mci_clk", "fff80000.mmc", &mmc0_clk),
+	CLKDEV_CON_DEV_ID("mci_clk", "fff84000.mmc", &mmc1_clk),
 	CLKDEV_CON_DEV_ID(NULL, "fff88000.i2c", &twi_clk),
+	CLKDEV_CON_DEV_ID(NULL, "fffff200.gpio", &pioA_clk),
+	CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioB_clk),
+	CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioCDE_clk),
+	CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioCDE_clk),
+	CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioCDE_clk),
 };
 
 static struct clk_lookup usart_clocks_lookups[] = {
@@ -365,10 +372,10 @@
 	0,	/* Advanced Interrupt Controller (IRQ1) */
 };
 
-struct at91_init_soc __initdata at91sam9263_soc = {
+AT91_SOC_START(sam9263)
 	.map_io = at91sam9263_map_io,
 	.default_irq_priority = at91sam9263_default_irq_priority,
 	.ioremap_registers = at91sam9263_ioremap_registers,
 	.register_clocks = at91sam9263_register_clocks,
 	.init = at91sam9263_initialize,
-};
+AT91_SOC_END
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index cb85da2..9c61e59 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -78,7 +78,7 @@
 
 	/* Enable overcurrent notification */
 	for (i = 0; i < data->ports; i++) {
-		if (data->overcurrent_pin[i])
+		if (gpio_is_valid(data->overcurrent_pin[i]))
 			at91_set_gpio_input(data->overcurrent_pin[i], 1);
 	}
 
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index 84af1b5..c5c2acc 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -256,10 +256,18 @@
 	CLKDEV_CON_DEV_ID("t0_clk", "fffd4000.timer", &tcb0_clk),
 	CLKDEV_CON_DEV_ID("hclk", "700000.ohci", &uhphs_clk),
 	CLKDEV_CON_DEV_ID("ehci_clk", "800000.ehci", &uhphs_clk),
+	CLKDEV_CON_DEV_ID("mci_clk", "fff80000.mmc", &mmc0_clk),
+	CLKDEV_CON_DEV_ID("mci_clk", "fffd0000.mmc", &mmc1_clk),
 	CLKDEV_CON_DEV_ID(NULL, "fff84000.i2c", &twi0_clk),
 	CLKDEV_CON_DEV_ID(NULL, "fff88000.i2c", &twi1_clk),
 	/* fake hclk clock */
 	CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &uhphs_clk),
+	CLKDEV_CON_DEV_ID(NULL, "fffff200.gpio", &pioA_clk),
+	CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioB_clk),
+	CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioC_clk),
+	CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioDE_clk),
+	CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioDE_clk),
+
 	CLKDEV_CON_ID("pioA", &pioA_clk),
 	CLKDEV_CON_ID("pioB", &pioB_clk),
 	CLKDEV_CON_ID("pioC", &pioC_clk),
@@ -409,10 +417,10 @@
 	0,	/* Advanced Interrupt Controller (IRQ0) */
 };
 
-struct at91_init_soc __initdata at91sam9g45_soc = {
+AT91_SOC_START(sam9g45)
 	.map_io = at91sam9g45_map_io,
 	.default_irq_priority = at91sam9g45_default_irq_priority,
 	.ioremap_registers = at91sam9g45_ioremap_registers,
 	.register_clocks = at91sam9g45_register_clocks,
 	.init = at91sam9g45_initialize,
-};
+AT91_SOC_END
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index b159607..fcd233c 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -1841,8 +1841,8 @@
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= AT91SAM9G45_ID_AESTDESSHA,
-		.end	= AT91SAM9G45_ID_AESTDESSHA,
+		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
+		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -1874,8 +1874,8 @@
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= AT91SAM9G45_ID_AESTDESSHA,
-		.end	= AT91SAM9G45_ID_AESTDESSHA,
+		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
+		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -1910,8 +1910,8 @@
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= AT91SAM9G45_ID_AESTDESSHA,
-		.end	= AT91SAM9G45_ID_AESTDESSHA,
+		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
+		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
diff --git a/arch/arm/mach-at91/at91sam9n12.c b/arch/arm/mach-at91/at91sam9n12.c
index 732d3d3..70b3a992 100644
--- a/arch/arm/mach-at91/at91sam9n12.c
+++ b/arch/arm/mach-at91/at91sam9n12.c
@@ -168,13 +168,14 @@
 	CLKDEV_CON_DEV_ID("usart", "f8028000.serial", &usart3_clk),
 	CLKDEV_CON_DEV_ID("t0_clk", "f8008000.timer", &tcb_clk),
 	CLKDEV_CON_DEV_ID("t0_clk", "f800c000.timer", &tcb_clk),
+	CLKDEV_CON_DEV_ID("mci_clk", "f0008000.mmc", &mmc_clk),
 	CLKDEV_CON_DEV_ID("dma_clk", "ffffec00.dma-controller", &dma_clk),
 	CLKDEV_CON_DEV_ID(NULL, "f8010000.i2c", &twi0_clk),
 	CLKDEV_CON_DEV_ID(NULL, "f8014000.i2c", &twi1_clk),
-	CLKDEV_CON_ID("pioA", &pioAB_clk),
-	CLKDEV_CON_ID("pioB", &pioAB_clk),
-	CLKDEV_CON_ID("pioC", &pioCD_clk),
-	CLKDEV_CON_ID("pioD", &pioCD_clk),
+	CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioAB_clk),
+	CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioAB_clk),
+	CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioCD_clk),
+	CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioCD_clk),
 	/* additional fake clock for macb_hclk */
 	CLKDEV_CON_DEV_ID("hclk", "500000.ohci", &uhp_clk),
 	CLKDEV_CON_DEV_ID("ohci_clk", "500000.ohci", &uhp_clk),
@@ -223,13 +224,10 @@
 void __init at91sam9n12_initialize(void)
 {
 	at91_extern_irq = (1 << AT91SAM9N12_ID_IRQ0);
-
-	/* Register GPIO subsystem (using DT) */
-	at91_gpio_init(NULL, 0);
 }
 
-struct at91_init_soc __initdata at91sam9n12_soc = {
+AT91_SOC_START(sam9n12)
 	.map_io = at91sam9n12_map_io,
 	.register_clocks = at91sam9n12_register_clocks,
 	.init = at91sam9n12_initialize,
-};
+AT91_SOC_END
diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c
index 72e9084..cbe72e4 100644
--- a/arch/arm/mach-at91/at91sam9rl.c
+++ b/arch/arm/mach-at91/at91sam9rl.c
@@ -338,10 +338,10 @@
 	0,	/* Advanced Interrupt Controller */
 };
 
-struct at91_init_soc __initdata at91sam9rl_soc = {
+AT91_SOC_START(sam9rl)
 	.map_io = at91sam9rl_map_io,
 	.default_irq_priority = at91sam9rl_default_irq_priority,
 	.ioremap_registers = at91sam9rl_ioremap_registers,
 	.register_clocks = at91sam9rl_register_clocks,
 	.init = at91sam9rl_initialize,
-};
+AT91_SOC_END
diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c
index e503538..3c729f0 100644
--- a/arch/arm/mach-at91/at91sam9x5.c
+++ b/arch/arm/mach-at91/at91sam9x5.c
@@ -229,15 +229,17 @@
 	CLKDEV_CON_DEV_ID("usart", "f8028000.serial", &usart3_clk),
 	CLKDEV_CON_DEV_ID("t0_clk", "f8008000.timer", &tcb0_clk),
 	CLKDEV_CON_DEV_ID("t0_clk", "f800c000.timer", &tcb0_clk),
+	CLKDEV_CON_DEV_ID("mci_clk", "f0008000.mmc", &mmc0_clk),
+	CLKDEV_CON_DEV_ID("mci_clk", "f000c000.mmc", &mmc1_clk),
 	CLKDEV_CON_DEV_ID("dma_clk", "ffffec00.dma-controller", &dma0_clk),
 	CLKDEV_CON_DEV_ID("dma_clk", "ffffee00.dma-controller", &dma1_clk),
 	CLKDEV_CON_DEV_ID(NULL, "f8010000.i2c", &twi0_clk),
 	CLKDEV_CON_DEV_ID(NULL, "f8014000.i2c", &twi1_clk),
 	CLKDEV_CON_DEV_ID(NULL, "f8018000.i2c", &twi2_clk),
-	CLKDEV_CON_ID("pioA", &pioAB_clk),
-	CLKDEV_CON_ID("pioB", &pioAB_clk),
-	CLKDEV_CON_ID("pioC", &pioCD_clk),
-	CLKDEV_CON_ID("pioD", &pioCD_clk),
+	CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioAB_clk),
+	CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioAB_clk),
+	CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioCD_clk),
+	CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioCD_clk),
 	/* additional fake clock for macb_hclk */
 	CLKDEV_CON_DEV_ID("hclk", "f802c000.ethernet", &macb0_clk),
 	CLKDEV_CON_DEV_ID("hclk", "f8030000.ethernet", &macb1_clk),
@@ -313,18 +315,11 @@
 	at91_init_sram(0, AT91SAM9X5_SRAM_BASE, AT91SAM9X5_SRAM_SIZE);
 }
 
-void __init at91sam9x5_initialize(void)
-{
-	/* Register GPIO subsystem (using DT) */
-	at91_gpio_init(NULL, 0);
-}
-
 /* --------------------------------------------------------------------
  *  Interrupt initialization
  * -------------------------------------------------------------------- */
 
-struct at91_init_soc __initdata at91sam9x5_soc = {
+AT91_SOC_START(sam9x5)
 	.map_io = at91sam9x5_map_io,
 	.register_clocks = at91sam9x5_register_clocks,
-	.init = at91sam9x5_initialize,
-};
+AT91_SOC_END
diff --git a/arch/arm/mach-at91/board-dt.c b/arch/arm/mach-at91/board-dt.c
index e8f45c4..3b6a948 100644
--- a/arch/arm/mach-at91/board-dt.c
+++ b/arch/arm/mach-at91/board-dt.c
@@ -30,8 +30,6 @@
 static const struct of_device_id irq_of_match[] __initconst = {
 
 	{ .compatible = "atmel,at91rm9200-aic", .data = at91_aic_of_init },
-	{ .compatible = "atmel,at91rm9200-gpio", .data = at91_gpio_of_irq_setup },
-	{ .compatible = "atmel,at91sam9x5-gpio", .data = at91_gpio_of_irq_setup },
 	{ /*sentinel*/ }
 };
 
diff --git a/arch/arm/mach-at91/board-rm9200-dt.c b/arch/arm/mach-at91/board-rm9200-dt.c
new file mode 100644
index 0000000..5f9ce3d
--- /dev/null
+++ b/arch/arm/mach-at91/board-rm9200-dt.c
@@ -0,0 +1,57 @@
+/*
+ *  Setup code for AT91RM9200 Evaluation Kits with Device Tree support
+ *
+ *  Copyright (C) 2011 Atmel,
+ *                2011 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *                2012 Joachim Eastwood <manabian@gmail.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+
+#include <asm/setup.h>
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include "at91_aic.h"
+#include "generic.h"
+
+
+static const struct of_device_id irq_of_match[] __initconst = {
+	{ .compatible = "atmel,at91rm9200-aic", .data = at91_aic_of_init },
+	{ /*sentinel*/ }
+};
+
+static void __init at91rm9200_dt_init_irq(void)
+{
+	of_irq_init(irq_of_match);
+}
+
+static void __init at91rm9200_dt_device_init(void)
+{
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static const char *at91rm9200_dt_board_compat[] __initdata = {
+	"atmel,at91rm9200",
+	NULL
+};
+
+DT_MACHINE_START(at91rm9200_dt, "Atmel AT91RM9200 (Device Tree)")
+	.timer		= &at91rm9200_timer,
+	.map_io		= at91_map_io,
+	.handle_irq	= at91_aic_handle_irq,
+	.init_early	= at91rm9200_dt_initialize,
+	.init_irq	= at91rm9200_dt_init_irq,
+	.init_machine	= at91rm9200_dt_device_init,
+	.dt_compat	= at91rm9200_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index b62f560e..fc593d6 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -20,6 +20,7 @@
 extern void __init at91rm9200_set_type(int type);
 extern void __init at91_initialize(unsigned long main_clock);
 extern void __init at91x40_initialize(unsigned long main_clock);
+extern void __init at91rm9200_dt_initialize(void);
 extern void __init at91_dt_initialize(void);
 
  /* Interrupts */
diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c
index be42cf0..c5d7e1e 100644
--- a/arch/arm/mach-at91/gpio.c
+++ b/arch/arm/mach-at91/gpio.c
@@ -23,8 +23,6 @@
 #include <linux/io.h>
 #include <linux/irqdomain.h>
 #include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/of_gpio.h>
 
 #include <asm/mach/irq.h>
 
@@ -33,6 +31,8 @@
 
 #include "generic.h"
 
+#define MAX_NB_GPIO_PER_BANK	32
+
 struct at91_gpio_chip {
 	struct gpio_chip	chip;
 	struct at91_gpio_chip	*next;		/* Bank sharing same clock */
@@ -46,6 +46,7 @@
 
 #define to_at91_gpio_chip(c) container_of(c, struct at91_gpio_chip, chip)
 
+static int at91_gpiolib_request(struct gpio_chip *chip, unsigned offset);
 static void at91_gpiolib_dbg_show(struct seq_file *s, struct gpio_chip *chip);
 static void at91_gpiolib_set(struct gpio_chip *chip, unsigned offset, int val);
 static int at91_gpiolib_get(struct gpio_chip *chip, unsigned offset);
@@ -55,26 +56,27 @@
 					unsigned offset);
 static int at91_gpiolib_to_irq(struct gpio_chip *chip, unsigned offset);
 
-#define AT91_GPIO_CHIP(name, nr_gpio)					\
+#define AT91_GPIO_CHIP(name)						\
 	{								\
 		.chip = {						\
 			.label		  = name,			\
+			.request	  = at91_gpiolib_request,	\
 			.direction_input  = at91_gpiolib_direction_input, \
 			.direction_output = at91_gpiolib_direction_output, \
 			.get		  = at91_gpiolib_get,		\
 			.set		  = at91_gpiolib_set,		\
 			.dbg_show	  = at91_gpiolib_dbg_show,	\
 			.to_irq		  = at91_gpiolib_to_irq,	\
-			.ngpio		  = nr_gpio,			\
+			.ngpio		  = MAX_NB_GPIO_PER_BANK,	\
 		},							\
 	}
 
 static struct at91_gpio_chip gpio_chip[] = {
-	AT91_GPIO_CHIP("pioA", 32),
-	AT91_GPIO_CHIP("pioB", 32),
-	AT91_GPIO_CHIP("pioC", 32),
-	AT91_GPIO_CHIP("pioD", 32),
-	AT91_GPIO_CHIP("pioE", 32),
+	AT91_GPIO_CHIP("pioA"),
+	AT91_GPIO_CHIP("pioB"),
+	AT91_GPIO_CHIP("pioC"),
+	AT91_GPIO_CHIP("pioD"),
+	AT91_GPIO_CHIP("pioE"),
 };
 
 static int gpio_banks;
@@ -89,7 +91,7 @@
 
 static inline void __iomem *pin_to_controller(unsigned pin)
 {
-	pin /= 32;
+	pin /= MAX_NB_GPIO_PER_BANK;
 	if (likely(pin < gpio_banks))
 		return gpio_chip[pin].regbase;
 
@@ -98,7 +100,7 @@
 
 static inline unsigned pin_to_mask(unsigned pin)
 {
-	return 1 << (pin % 32);
+	return 1 << (pin % MAX_NB_GPIO_PER_BANK);
 }
 
 
@@ -713,80 +715,6 @@
  */
 static struct lock_class_key gpio_lock_class;
 
-#if defined(CONFIG_OF)
-static int at91_gpio_irq_map(struct irq_domain *h, unsigned int virq,
-							irq_hw_number_t hw)
-{
-	struct at91_gpio_chip	*at91_gpio = h->host_data;
-
-	irq_set_lockdep_class(virq, &gpio_lock_class);
-
-	/*
-	 * Can use the "simple" and not "edge" handler since it's
-	 * shorter, and the AIC handles interrupts sanely.
-	 */
-	irq_set_chip_and_handler(virq, &gpio_irqchip,
-				 handle_simple_irq);
-	set_irq_flags(virq, IRQF_VALID);
-	irq_set_chip_data(virq, at91_gpio);
-
-	return 0;
-}
-
-static struct irq_domain_ops at91_gpio_ops = {
-	.map	= at91_gpio_irq_map,
-	.xlate	= irq_domain_xlate_twocell,
-};
-
-int __init at91_gpio_of_irq_setup(struct device_node *node,
-				     struct device_node *parent)
-{
-	struct at91_gpio_chip	*prev = NULL;
-	int			alias_idx = of_alias_get_id(node, "gpio");
-	struct at91_gpio_chip	*at91_gpio = &gpio_chip[alias_idx];
-
-	/* Setup proper .irq_set_type function */
-	if (has_pio3())
-		gpio_irqchip.irq_set_type = alt_gpio_irq_type;
-	else
-		gpio_irqchip.irq_set_type = gpio_irq_type;
-
-	/* Disable irqs of this PIO controller */
-	__raw_writel(~0, at91_gpio->regbase + PIO_IDR);
-
-	/* Setup irq domain */
-	at91_gpio->domain = irq_domain_add_linear(node, at91_gpio->chip.ngpio,
-						&at91_gpio_ops, at91_gpio);
-	if (!at91_gpio->domain)
-		panic("at91_gpio.%d: couldn't allocate irq domain (DT).\n",
-			at91_gpio->pioc_idx);
-
-	/* Setup chained handler */
-	if (at91_gpio->pioc_idx)
-		prev = &gpio_chip[at91_gpio->pioc_idx - 1];
-
-	/* The toplevel handler handles one bank of GPIOs, except
-	 * on some SoC it can handles up to three...
-	 * We only set up the handler for the first of the list.
-	 */
-	if (prev && prev->next == at91_gpio)
-		return 0;
-
-	at91_gpio->pioc_virq = irq_create_mapping(irq_find_host(parent),
-							at91_gpio->pioc_hwirq);
-	irq_set_chip_data(at91_gpio->pioc_virq, at91_gpio);
-	irq_set_chained_handler(at91_gpio->pioc_virq, gpio_irq_handler);
-
-	return 0;
-}
-#else
-int __init at91_gpio_of_irq_setup(struct device_node *node,
-				     struct device_node *parent)
-{
-	return -EINVAL;
-}
-#endif
-
 /*
  * irqdomain initialization: pile up irqdomains on top of AIC range
  */
@@ -862,6 +790,16 @@
 }
 
 /* gpiolib support */
+static int at91_gpiolib_request(struct gpio_chip *chip, unsigned offset)
+{
+	struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
+	void __iomem *pio = at91_gpio->regbase;
+	unsigned mask = 1 << offset;
+
+	__raw_writel(mask, pio + PIO_PER);
+	return 0;
+}
+
 static int at91_gpiolib_direction_input(struct gpio_chip *chip,
 					unsigned offset)
 {
@@ -975,81 +913,11 @@
 	return -EINVAL;
 }
 
-#ifdef CONFIG_OF_GPIO
-static void __init of_at91_gpio_init_one(struct device_node *np)
-{
-	int alias_idx;
-	struct at91_gpio_chip *at91_gpio;
-
-	if (!np)
-		return;
-
-	alias_idx = of_alias_get_id(np, "gpio");
-	if (alias_idx >= MAX_GPIO_BANKS) {
-		pr_err("at91_gpio, failed alias idx(%d) > MAX_GPIO_BANKS(%d), ignoring.\n",
-						alias_idx, MAX_GPIO_BANKS);
-		return;
-	}
-
-	at91_gpio = &gpio_chip[alias_idx];
-	at91_gpio->chip.base = alias_idx * at91_gpio->chip.ngpio;
-
-	at91_gpio->regbase = of_iomap(np, 0);
-	if (!at91_gpio->regbase) {
-		pr_err("at91_gpio.%d, failed to map registers, ignoring.\n",
-								alias_idx);
-		return;
-	}
-
-	/* Get the interrupts property */
-	if (of_property_read_u32(np, "interrupts", &at91_gpio->pioc_hwirq)) {
-		pr_err("at91_gpio.%d, failed to get interrupts property, ignoring.\n",
-								alias_idx);
-		goto ioremap_err;
-	}
-
-	/* Get capabilities from compatibility property */
-	if (of_device_is_compatible(np, "atmel,at91sam9x5-gpio"))
-		at91_gpio_caps |= AT91_GPIO_CAP_PIO3;
-
-	/* Setup clock */
-	if (at91_gpio_setup_clk(alias_idx))
-		goto ioremap_err;
-
-	at91_gpio->chip.of_node = np;
-	gpio_banks = max(gpio_banks, alias_idx + 1);
-	at91_gpio->pioc_idx = alias_idx;
-	return;
-
-ioremap_err:
-	iounmap(at91_gpio->regbase);
-}
-
-static int __init of_at91_gpio_init(void)
-{
-	struct device_node *np = NULL;
-
-	/*
-	 * This isn't ideal, but it gets things hooked up until this
-	 * driver is converted into a platform_device
-	 */
-	for_each_compatible_node(np, NULL, "atmel,at91rm9200-gpio")
-		of_at91_gpio_init_one(np);
-
-	return gpio_banks > 0 ? 0 : -EINVAL;
-}
-#else
-static int __init of_at91_gpio_init(void)
-{
-	return -EINVAL;
-}
-#endif
-
 static void __init at91_gpio_init_one(int idx, u32 regbase, int pioc_hwirq)
 {
 	struct at91_gpio_chip *at91_gpio = &gpio_chip[idx];
 
-	at91_gpio->chip.base = idx * at91_gpio->chip.ngpio;
+	at91_gpio->chip.base = idx * MAX_NB_GPIO_PER_BANK;
 	at91_gpio->pioc_hwirq = pioc_hwirq;
 	at91_gpio->pioc_idx = idx;
 
@@ -1079,11 +947,11 @@
 
 	BUG_ON(nr_banks > MAX_GPIO_BANKS);
 
-	if (of_at91_gpio_init() < 0) {
-		/* No GPIO controller found in device tree */
-		for (i = 0; i < nr_banks; i++)
-			at91_gpio_init_one(i, data[i].regbase, data[i].id);
-	}
+	if (of_have_populated_dt())
+		return;
+
+	for (i = 0; i < nr_banks; i++)
+		at91_gpio_init_one(i, data[i].regbase, data[i].id);
 
 	for (i = 0; i < gpio_banks; i++) {
 		at91_gpio = &gpio_chip[i];
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index c55a436..a0d92a9 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -70,16 +70,6 @@
 extern void __init at91_add_device_cf(struct at91_cf_data *data);
 
  /* MMC / SD */
-  /* at91_mci platform config */
-struct at91_mmc_data {
-	int		det_pin;	/* card detect IRQ */
-	unsigned	slot_b:1;	/* uses Slot B */
-	unsigned	wire4:1;	/* (SD) supports DAT0..DAT3 */
-	int		wp_pin;		/* (SD) writeprotect detect */
-	int		vcc_pin;	/* power switching (high == on) */
-};
-extern void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data);
-
   /* atmel-mci platform config */
 extern void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data);
 
diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c
index 0b32c81..19cdd0b 100644
--- a/arch/arm/mach-at91/setup.c
+++ b/arch/arm/mach-at91/setup.c
@@ -10,6 +10,7 @@
 #include <linux/mm.h>
 #include <linux/pm.h>
 #include <linux/of_address.h>
+#include <linux/pinctrl/machine.h>
 
 #include <asm/system_misc.h>
 #include <asm/mach/map.h>
@@ -338,6 +339,7 @@
 }
 
 static struct of_device_id ramc_ids[] = {
+	{ .compatible = "atmel,at91rm9200-sdramc" },
 	{ .compatible = "atmel,at91sam9260-sdramc" },
 	{ .compatible = "atmel,at91sam9g45-ddramc" },
 	{ /*sentinel*/ }
@@ -436,6 +438,19 @@
 	of_node_put(np);
 }
 
+void __init at91rm9200_dt_initialize(void)
+{
+	at91_dt_ramc();
+
+	/* Init clock subsystem */
+	at91_dt_clock_init();
+
+	/* Register the processor-specific clocks */
+	at91_boot_soc.register_clocks();
+
+	at91_boot_soc.init();
+}
+
 void __init at91_dt_initialize(void)
 {
 	at91_dt_rstc();
@@ -448,7 +463,8 @@
 	/* Register the processor-specific clocks */
 	at91_boot_soc.register_clocks();
 
-	at91_boot_soc.init();
+	if (at91_boot_soc.init)
+		at91_boot_soc.init();
 }
 #endif
 
@@ -463,4 +479,6 @@
 	at91_boot_soc.register_clocks();
 
 	at91_boot_soc.init();
+
+	pinctrl_provide_dummies();
 }
diff --git a/arch/arm/mach-at91/soc.h b/arch/arm/mach-at91/soc.h
index a9cfeb1..9c6d3d4 100644
--- a/arch/arm/mach-at91/soc.h
+++ b/arch/arm/mach-at91/soc.h
@@ -5,6 +5,7 @@
  */
 
 struct at91_init_soc {
+	int builtin;
 	unsigned int *default_irq_priority;
 	void (*map_io)(void);
 	void (*ioremap_registers)(void);
@@ -22,9 +23,18 @@
 extern struct at91_init_soc at91sam9x5_soc;
 extern struct at91_init_soc at91sam9n12_soc;
 
+#define AT91_SOC_START(_name)				\
+struct at91_init_soc __initdata at91##_name##_soc	\
+ __used							\
+						= {	\
+	.builtin	= 1,				\
+
+#define AT91_SOC_END					\
+};
+
 static inline int at91_soc_is_enabled(void)
 {
-	return at91_boot_soc.init != NULL;
+	return at91_boot_soc.builtin;
 }
 
 #if !defined(CONFIG_SOC_AT91RM9200)
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index cd0c8b1..14e9947 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -713,8 +713,7 @@
 		break;
 	case VPBE_ENC_CUSTOM_TIMINGS:
 		if (pclock <= 27000000) {
-			v |= DM644X_VPSS_MUXSEL_PLL2_MODE |
-			     DM644X_VPSS_DACCLKEN;
+			v |= DM644X_VPSS_DACCLKEN;
 			writel(v, DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL));
 		} else {
 			/*
diff --git a/arch/arm/mach-dove/include/mach/pm.h b/arch/arm/mach-dove/include/mach/pm.h
index 7bcd0df..b47f750 100644
--- a/arch/arm/mach-dove/include/mach/pm.h
+++ b/arch/arm/mach-dove/include/mach/pm.h
@@ -63,7 +63,7 @@
 
 static inline int irq_to_pmu(int irq)
 {
-	if (IRQ_DOVE_PMU_START < irq && irq < NR_IRQS)
+	if (IRQ_DOVE_PMU_START <= irq && irq < NR_IRQS)
 		return irq - IRQ_DOVE_PMU_START;
 
 	return -EINVAL;
diff --git a/arch/arm/mach-dove/irq.c b/arch/arm/mach-dove/irq.c
index 0877115..bc4344a 100644
--- a/arch/arm/mach-dove/irq.c
+++ b/arch/arm/mach-dove/irq.c
@@ -46,8 +46,20 @@
 	int pin = irq_to_pmu(d->irq);
 	u32 u;
 
+	/*
+	 * The PMU mask register is not RW0C: it is RW.  This means that
+	 * the bits take whatever value is written to them; if you write
+	 * a '1', you will set the interrupt.
+	 *
+	 * Unfortunately this means there is NO race free way to clear
+	 * these interrupts.
+	 *
+	 * So, let's structure the code so that the window is as small as
+	 * possible.
+	 */
 	u = ~(1 << (pin & 31));
-	writel(u, PMU_INTERRUPT_CAUSE);
+	u &= readl_relaxed(PMU_INTERRUPT_CAUSE);
+	writel_relaxed(u, PMU_INTERRUPT_CAUSE);
 }
 
 static struct irq_chip pmu_irq_chip = {
diff --git a/arch/arm/mach-exynos/dma.c b/arch/arm/mach-exynos/dma.c
index 21d568b..87e07d6 100644
--- a/arch/arm/mach-exynos/dma.c
+++ b/arch/arm/mach-exynos/dma.c
@@ -275,6 +275,9 @@
 		exynos_pdma1_pdata.nr_valid_peri =
 			ARRAY_SIZE(exynos4210_pdma1_peri);
 		exynos_pdma1_pdata.peri_id = exynos4210_pdma1_peri;
+
+		if (samsung_rev() == EXYNOS4210_REV_0)
+			exynos_mdma1_device.res.start = EXYNOS4_PA_S_MDMA1;
 	} else if (soc_is_exynos4212() || soc_is_exynos4412()) {
 		exynos_pdma0_pdata.nr_valid_peri =
 			ARRAY_SIZE(exynos4212_pdma0_peri);
diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
index 8480849..ed4da45 100644
--- a/arch/arm/mach-exynos/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -90,6 +90,7 @@
 
 #define EXYNOS4_PA_MDMA0		0x10810000
 #define EXYNOS4_PA_MDMA1		0x12850000
+#define EXYNOS4_PA_S_MDMA1		0x12840000
 #define EXYNOS4_PA_PDMA0		0x12680000
 #define EXYNOS4_PA_PDMA1		0x12690000
 #define EXYNOS5_PA_MDMA0		0x10800000
diff --git a/arch/arm/mach-highbank/system.c b/arch/arm/mach-highbank/system.c
index 82c27230..86e37cd 100644
--- a/arch/arm/mach-highbank/system.c
+++ b/arch/arm/mach-highbank/system.c
@@ -28,6 +28,7 @@
 		hignbank_set_pwr_soft_reset();
 
 	scu_power_mode(scu_base_addr, SCU_PM_POWEROFF);
-	cpu_do_idle();
+	while (1)
+		cpu_do_idle();
 }
 
diff --git a/arch/arm/mach-imx/clk-gate2.c b/arch/arm/mach-imx/clk-gate2.c
index 3c1b8ff..cc49c7a 100644
--- a/arch/arm/mach-imx/clk-gate2.c
+++ b/arch/arm/mach-imx/clk-gate2.c
@@ -112,7 +112,7 @@
 
 	clk = clk_register(dev, &gate->hw);
 	if (IS_ERR(clk))
-		kfree(clk);
+		kfree(gate);
 
 	return clk;
 }
diff --git a/arch/arm/mach-imx/ehci-imx25.c b/arch/arm/mach-imx/ehci-imx25.c
index 412c583..576af74 100644
--- a/arch/arm/mach-imx/ehci-imx25.c
+++ b/arch/arm/mach-imx/ehci-imx25.c
@@ -30,7 +30,7 @@
 #define MX25_H1_SIC_SHIFT	21
 #define MX25_H1_SIC_MASK	(0x3 << MX25_H1_SIC_SHIFT)
 #define MX25_H1_PP_BIT		(1 << 18)
-#define MX25_H1_PM_BIT		(1 << 8)
+#define MX25_H1_PM_BIT		(1 << 16)
 #define MX25_H1_IPPUE_UP_BIT	(1 << 7)
 #define MX25_H1_IPPUE_DOWN_BIT	(1 << 6)
 #define MX25_H1_TLL_BIT		(1 << 5)
diff --git a/arch/arm/mach-imx/ehci-imx35.c b/arch/arm/mach-imx/ehci-imx35.c
index 779e16e..2933978 100644
--- a/arch/arm/mach-imx/ehci-imx35.c
+++ b/arch/arm/mach-imx/ehci-imx35.c
@@ -30,7 +30,7 @@
 #define MX35_H1_SIC_SHIFT	21
 #define MX35_H1_SIC_MASK	(0x3 << MX35_H1_SIC_SHIFT)
 #define MX35_H1_PP_BIT		(1 << 18)
-#define MX35_H1_PM_BIT		(1 << 8)
+#define MX35_H1_PM_BIT		(1 << 16)
 #define MX35_H1_IPPUE_UP_BIT	(1 << 7)
 #define MX35_H1_IPPUE_DOWN_BIT	(1 << 6)
 #define MX35_H1_TLL_BIT		(1 << 5)
diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c
index e428f3a..b3d86d7 100644
--- a/arch/arm/mach-integrator/impd1.c
+++ b/arch/arm/mach-integrator/impd1.c
@@ -21,10 +21,9 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
 #include <linux/io.h>
+#include <linux/platform_data/clk-integrator.h>
 #include <linux/slab.h>
-#include <linux/clkdev.h>
 
-#include <asm/hardware/icst.h>
 #include <mach/lm.h>
 #include <mach/impd1.h>
 #include <asm/sizes.h>
@@ -36,45 +35,6 @@
 
 struct impd1_module {
 	void __iomem	*base;
-	struct clk	vcos[2];
-	struct clk_lookup *clks[3];
-};
-
-static const struct icst_params impd1_vco_params = {
-	.ref		= 24000000,	/* 24 MHz */
-	.vco_max	= ICST525_VCO_MAX_3V,
-	.vco_min	= ICST525_VCO_MIN,
-	.vd_min		= 12,
-	.vd_max		= 519,
-	.rd_min		= 3,
-	.rd_max		= 120,
-	.s2div		= icst525_s2div,
-	.idx2s		= icst525_idx2s,
-};
-
-static void impd1_setvco(struct clk *clk, struct icst_vco vco)
-{
-	struct impd1_module *impd1 = clk->data;
-	u32 val = vco.v | (vco.r << 9) | (vco.s << 16);
-
-	writel(0xa05f, impd1->base + IMPD1_LOCK);
-	writel(val, clk->vcoreg);
-	writel(0, impd1->base + IMPD1_LOCK);
-
-#ifdef DEBUG
-	vco.v = val & 0x1ff;
-	vco.r = (val >> 9) & 0x7f;
-	vco.s = (val >> 16) & 7;
-
-	pr_debug("IM-PD1: VCO%d clock is %ld Hz\n",
-		 vconr, icst525_hz(&impd1_vco_params, vco));
-#endif
-}
-
-static const struct clk_ops impd1_clk_ops = {
-	.round	= icst_clk_round,
-	.set	= icst_clk_set,
-	.setvco	= impd1_setvco,
 };
 
 void impd1_tweak_control(struct device *dev, u32 mask, u32 val)
@@ -344,10 +304,6 @@
 	}
 };
 
-static struct clk fixed_14745600 = {
-	.rate = 14745600,
-};
-
 static int impd1_probe(struct lm_device *dev)
 {
 	struct impd1_module *impd1;
@@ -376,23 +332,7 @@
 	printk("IM-PD1 found at 0x%08lx\n",
 		(unsigned long)dev->resource.start);
 
-	for (i = 0; i < ARRAY_SIZE(impd1->vcos); i++) {
-		impd1->vcos[i].ops = &impd1_clk_ops,
-		impd1->vcos[i].owner = THIS_MODULE,
-		impd1->vcos[i].params = &impd1_vco_params,
-		impd1->vcos[i].data = impd1;
-	}
-	impd1->vcos[0].vcoreg = impd1->base + IMPD1_OSC1;
-	impd1->vcos[1].vcoreg = impd1->base + IMPD1_OSC2;
-
-	impd1->clks[0] = clkdev_alloc(&impd1->vcos[0], NULL, "lm%x:01000",
-					dev->id);
-	impd1->clks[1] = clkdev_alloc(&fixed_14745600, NULL, "lm%x:00100",
-					dev->id);
-	impd1->clks[2] = clkdev_alloc(&fixed_14745600, NULL, "lm%x:00200",
-					dev->id);
-	for (i = 0; i < ARRAY_SIZE(impd1->clks); i++)
-		clkdev_add(impd1->clks[i]);
+	integrator_impd1_clk_init(impd1->base, dev->id);
 
 	for (i = 0; i < ARRAY_SIZE(impd1_devs); i++) {
 		struct impd1_device *idev = impd1_devs + i;
@@ -431,12 +371,9 @@
 static void impd1_remove(struct lm_device *dev)
 {
 	struct impd1_module *impd1 = lm_get_drvdata(dev);
-	int i;
 
 	device_for_each_child(&dev->dev, NULL, impd1_remove_one);
-
-	for (i = 0; i < ARRAY_SIZE(impd1->clks); i++)
-		clkdev_drop(impd1->clks[i]);
+	integrator_impd1_clk_exit(dev->id);
 
 	lm_set_drvdata(dev, NULL);
 
diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c
index 1694f01..6d6bde3 100644
--- a/arch/arm/mach-ixp4xx/common-pci.c
+++ b/arch/arm/mach-ixp4xx/common-pci.c
@@ -410,6 +410,7 @@
 		 * Enable the IO window to be way up high, at 0xfffffc00
 		 */
 		local_write_config(PCI_BASE_ADDRESS_5, 4, 0xfffffc01);
+		local_write_config(0x40, 4, 0x000080FF); /* No TRDY time limit */
 	} else {
 		printk("PCI: IXP4xx is target - No bus scan performed\n");
 	}
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index fdf91a1..8c0c0e2 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -67,15 +67,12 @@
 		.pfn		= __phys_to_pfn(IXP4XX_PCI_CFG_BASE_PHYS),
 		.length		= IXP4XX_PCI_CFG_REGION_SIZE,
 		.type		= MT_DEVICE
-	},
-#ifdef CONFIG_DEBUG_LL
-	{	/* Debug UART mapping */
-		.virtual	= (unsigned long)IXP4XX_DEBUG_UART_BASE_VIRT,
-		.pfn		= __phys_to_pfn(IXP4XX_DEBUG_UART_BASE_PHYS),
-		.length		= IXP4XX_DEBUG_UART_REGION_SIZE,
+	}, {	/* Queue Manager */
+		.virtual	= (unsigned long)IXP4XX_QMGR_BASE_VIRT,
+		.pfn		= __phys_to_pfn(IXP4XX_QMGR_BASE_PHYS),
+		.length		= IXP4XX_QMGR_REGION_SIZE,
 		.type		= MT_DEVICE
-	}
-#endif
+	},
 };
 
 void __init ixp4xx_map_io(void)
diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c
index b800a03..53b8348 100644
--- a/arch/arm/mach-ixp4xx/goramo_mlr.c
+++ b/arch/arm/mach-ixp4xx/goramo_mlr.c
@@ -15,6 +15,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/pci.h>
+#include <asm/system_info.h>
 
 #define SLOT_ETHA		0x0B	/* IDSEL = AD21 */
 #define SLOT_ETHB		0x0C	/* IDSEL = AD20 */
@@ -329,7 +330,7 @@
 };
 
 
-static struct platform_device *device_tab[6] __initdata = {
+static struct platform_device *device_tab[7] __initdata = {
 	&device_flash,		/* index 0 */
 };
 
diff --git a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
index 8c9f8d5..ff686cb 100644
--- a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
@@ -17,8 +17,8 @@
 #else
 		mov	\rp, #0
 #endif
-                orr     \rv, \rp, #0xff000000	@ virtual
-		orr	\rv, \rv, #0x00b00000
+		orr	\rv, \rp, #0xfe000000	@ virtual
+		orr	\rv, \rv, #0x00f00000
                 orr     \rp, \rp, #0xc8000000	@ physical
                 .endm
 
diff --git a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
index eb68b61..c5bae9c 100644
--- a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
+++ b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
@@ -30,51 +30,43 @@
  *
  * 0x50000000	0x10000000	ioremap'd	EXP BUS
  *
- * 0x6000000	0x00004000	ioremap'd	QMgr
+ * 0xC8000000	0x00013000	0xFEF00000	On-Chip Peripherals
  *
- * 0xC0000000	0x00001000	0xffbff000	PCI CFG
+ * 0xC0000000	0x00001000	0xFEF13000	PCI CFG
  *
- * 0xC4000000	0x00001000	0xffbfe000	EXP CFG
+ * 0xC4000000	0x00001000	0xFEF14000	EXP CFG
  *
- * 0xC8000000	0x00013000	0xffbeb000	On-Chip Peripherals
+ * 0x60000000	0x00004000	0xFEF15000	QMgr
  */
 
 /*
  * Queue Manager
  */
-#define IXP4XX_QMGR_BASE_PHYS		(0x60000000)
-#define IXP4XX_QMGR_REGION_SIZE		(0x00004000)
+#define IXP4XX_QMGR_BASE_PHYS		0x60000000
+#define IXP4XX_QMGR_BASE_VIRT		IOMEM(0xFEF15000)
+#define IXP4XX_QMGR_REGION_SIZE		0x00004000
 
 /*
- * Expansion BUS Configuration registers
+ * Peripheral space, including debug UART. Must be section-aligned so that
+ * it can be used with the low-level debug code.
  */
-#define IXP4XX_EXP_CFG_BASE_PHYS	(0xC4000000)
-#define IXP4XX_EXP_CFG_BASE_VIRT	IOMEM(0xFFBFE000)
-#define IXP4XX_EXP_CFG_REGION_SIZE	(0x00001000)
+#define IXP4XX_PERIPHERAL_BASE_PHYS	0xC8000000
+#define IXP4XX_PERIPHERAL_BASE_VIRT	IOMEM(0xFEF00000)
+#define IXP4XX_PERIPHERAL_REGION_SIZE	0x00013000
 
 /*
  * PCI Config registers
  */
-#define IXP4XX_PCI_CFG_BASE_PHYS	(0xC0000000)
-#define	IXP4XX_PCI_CFG_BASE_VIRT	IOMEM(0xFFBFF000)
-#define IXP4XX_PCI_CFG_REGION_SIZE	(0x00001000)
+#define IXP4XX_PCI_CFG_BASE_PHYS	0xC0000000
+#define IXP4XX_PCI_CFG_BASE_VIRT	IOMEM(0xFEF13000)
+#define IXP4XX_PCI_CFG_REGION_SIZE	0x00001000
 
 /*
- * Peripheral space
+ * Expansion BUS Configuration registers
  */
-#define IXP4XX_PERIPHERAL_BASE_PHYS	(0xC8000000)
-#define IXP4XX_PERIPHERAL_BASE_VIRT	IOMEM(0xFFBEB000)
-#define IXP4XX_PERIPHERAL_REGION_SIZE	(0x00013000)
-
-/*
- * Debug UART
- *
- * This is basically a remap of UART1 into a region that is section
- * aligned so that it * can be used with the low-level debug code.
- */
-#define	IXP4XX_DEBUG_UART_BASE_PHYS	(0xC8000000)
-#define	IXP4XX_DEBUG_UART_BASE_VIRT	IOMEM(0xffb00000)
-#define	IXP4XX_DEBUG_UART_REGION_SIZE	(0x00001000)
+#define IXP4XX_EXP_CFG_BASE_PHYS	0xC4000000
+#define IXP4XX_EXP_CFG_BASE_VIRT	0xFEF14000
+#define IXP4XX_EXP_CFG_REGION_SIZE	0x00001000
 
 #define IXP4XX_EXP_CS0_OFFSET	0x00
 #define IXP4XX_EXP_CS1_OFFSET   0x04
diff --git a/arch/arm/mach-ixp4xx/include/mach/qmgr.h b/arch/arm/mach-ixp4xx/include/mach/qmgr.h
index 9e7cad2..4de8da5 100644
--- a/arch/arm/mach-ixp4xx/include/mach/qmgr.h
+++ b/arch/arm/mach-ixp4xx/include/mach/qmgr.h
@@ -86,7 +86,7 @@
 
 static inline void qmgr_put_entry(unsigned int queue, u32 val)
 {
-	extern struct qmgr_regs __iomem *qmgr_regs;
+	struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT;
 #if DEBUG_QMGR
 	BUG_ON(!qmgr_queue_descs[queue]); /* not yet requested */
 
@@ -99,7 +99,7 @@
 static inline u32 qmgr_get_entry(unsigned int queue)
 {
 	u32 val;
-	extern struct qmgr_regs __iomem *qmgr_regs;
+	const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT;
 	val = __raw_readl(&qmgr_regs->acc[queue][0]);
 #if DEBUG_QMGR
 	BUG_ON(!qmgr_queue_descs[queue]); /* not yet requested */
@@ -112,14 +112,14 @@
 
 static inline int __qmgr_get_stat1(unsigned int queue)
 {
-	extern struct qmgr_regs __iomem *qmgr_regs;
+	const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT;
 	return (__raw_readl(&qmgr_regs->stat1[queue >> 3])
 		>> ((queue & 7) << 2)) & 0xF;
 }
 
 static inline int __qmgr_get_stat2(unsigned int queue)
 {
-	extern struct qmgr_regs __iomem *qmgr_regs;
+	const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT;
 	BUG_ON(queue >= HALF_QUEUES);
 	return (__raw_readl(&qmgr_regs->stat2[queue >> 4])
 		>> ((queue & 0xF) << 1)) & 0x3;
@@ -145,7 +145,7 @@
  */
 static inline int qmgr_stat_below_low_watermark(unsigned int queue)
 {
-	extern struct qmgr_regs __iomem *qmgr_regs;
+	const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT;
 	if (queue >= HALF_QUEUES)
 		return (__raw_readl(&qmgr_regs->statne_h) >>
 			(queue - HALF_QUEUES)) & 0x01;
@@ -172,7 +172,7 @@
  */
 static inline int qmgr_stat_full(unsigned int queue)
 {
-	extern struct qmgr_regs __iomem *qmgr_regs;
+	const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT;
 	if (queue >= HALF_QUEUES)
 		return (__raw_readl(&qmgr_regs->statf_h) >>
 			(queue - HALF_QUEUES)) & 0x01;
diff --git a/arch/arm/mach-ixp4xx/ixp4xx_npe.c b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
index a17ed79..d4eb09a 100644
--- a/arch/arm/mach-ixp4xx/ixp4xx_npe.c
+++ b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
@@ -116,7 +116,11 @@
 /* NPE mailbox_status value for reset */
 #define RESET_MBOX_STAT			0x0000F0F0
 
-const char *npe_names[] = { "NPE-A", "NPE-B", "NPE-C" };
+#define NPE_A_FIRMWARE "NPE-A"
+#define NPE_B_FIRMWARE "NPE-B"
+#define NPE_C_FIRMWARE "NPE-C"
+
+const char *npe_names[] = { NPE_A_FIRMWARE, NPE_B_FIRMWARE, NPE_C_FIRMWARE };
 
 #define print_npe(pri, npe, fmt, ...)					\
 	printk(pri "%s: " fmt, npe_name(npe), ## __VA_ARGS__)
@@ -724,6 +728,9 @@
 
 MODULE_AUTHOR("Krzysztof Halasa");
 MODULE_LICENSE("GPL v2");
+MODULE_FIRMWARE(NPE_A_FIRMWARE);
+MODULE_FIRMWARE(NPE_B_FIRMWARE);
+MODULE_FIRMWARE(NPE_C_FIRMWARE);
 
 EXPORT_SYMBOL(npe_names);
 EXPORT_SYMBOL(npe_running);
diff --git a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
index 852f7c9..9d1b6b7 100644
--- a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
+++ b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
@@ -14,7 +14,7 @@
 #include <linux/module.h>
 #include <mach/qmgr.h>
 
-struct qmgr_regs __iomem *qmgr_regs;
+static struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT;
 static struct resource *mem_res;
 static spinlock_t qmgr_lock;
 static u32 used_sram_bitmap[4]; /* 128 16-dword pages */
@@ -293,12 +293,6 @@
 	if (mem_res == NULL)
 		return -EBUSY;
 
-	qmgr_regs = ioremap(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE);
-	if (qmgr_regs == NULL) {
-		err = -ENOMEM;
-		goto error_map;
-	}
-
 	/* reset qmgr registers */
 	for (i = 0; i < 4; i++) {
 		__raw_writel(0x33333333, &qmgr_regs->stat1[i]);
@@ -347,8 +341,6 @@
 error_irq2:
 	free_irq(IRQ_IXP4XX_QM1, NULL);
 error_irq:
-	iounmap(qmgr_regs);
-error_map:
 	release_mem_region(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE);
 	return err;
 }
@@ -359,7 +351,6 @@
 	free_irq(IRQ_IXP4XX_QM2, NULL);
 	synchronize_irq(IRQ_IXP4XX_QM1);
 	synchronize_irq(IRQ_IXP4XX_QM2);
-	iounmap(qmgr_regs);
 	release_mem_region(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE);
 }
 
@@ -369,7 +360,6 @@
 MODULE_LICENSE("GPL v2");
 MODULE_AUTHOR("Krzysztof Halasa");
 
-EXPORT_SYMBOL(qmgr_regs);
 EXPORT_SYMBOL(qmgr_set_irq);
 EXPORT_SYMBOL(qmgr_enable_irq);
 EXPORT_SYMBOL(qmgr_disable_irq);
diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c
index ec54491..74fc5a0 100644
--- a/arch/arm/mach-kirkwood/pcie.c
+++ b/arch/arm/mach-kirkwood/pcie.c
@@ -207,14 +207,19 @@
 	return 1;
 }
 
+/*
+ * The root complex has a hardwired class of PCI_CLASS_MEMORY_OTHER, when it
+ * is operating as a root complex this needs to be switched to
+ * PCI_CLASS_BRIDGE_HOST or Linux will errantly try to process the BAR's on
+ * the device. Decoding setup is handled by the orion code.
+ */
 static void __devinit rc_pci_fixup(struct pci_dev *dev)
 {
-	/*
-	 * Prevent enumeration of root complex.
-	 */
 	if (dev->bus->parent == NULL && dev->devfn == 0) {
 		int i;
 
+		dev->class &= 0xff;
+		dev->class |= PCI_CLASS_BRIDGE_HOST << 8;
 		for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
 			dev->resource[i].start = 0;
 			dev->resource[i].end   = 0;
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index bfa1eab..22ef8a1 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -24,6 +24,7 @@
 #include <linux/i2c.h>
 #include <linux/io.h>
 #include <linux/pinctrl/machine.h>
+#include <linux/platform_data/pinctrl-nomadik.h>
 #include <asm/hardware/vic.h>
 #include <asm/sizes.h>
 #include <asm/mach-types.h>
@@ -32,9 +33,7 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/time.h>
 
-#include <plat/gpio-nomadik.h>
 #include <plat/mtu.h>
-#include <plat/pincfg.h>
 
 #include <linux/platform_data/mtd-nomadik-nand.h>
 #include <mach/fsmc.h>
diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
index b617eae..1273931 100644
--- a/arch/arm/mach-nomadik/cpu-8815.c
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -26,8 +26,8 @@
 #include <linux/irq.h>
 #include <linux/dma-mapping.h>
 #include <linux/platform_data/clk-nomadik.h>
+#include <linux/platform_data/pinctrl-nomadik.h>
 
-#include <plat/gpio-nomadik.h>
 #include <mach/hardware.h>
 #include <mach/irqs.h>
 #include <asm/mach/map.h>
diff --git a/arch/arm/mach-nomadik/i2c-8815nhk.c b/arch/arm/mach-nomadik/i2c-8815nhk.c
index 6d14454..0c2f662 100644
--- a/arch/arm/mach-nomadik/i2c-8815nhk.c
+++ b/arch/arm/mach-nomadik/i2c-8815nhk.c
@@ -4,8 +4,7 @@
 #include <linux/i2c-algo-bit.h>
 #include <linux/i2c-gpio.h>
 #include <linux/platform_device.h>
-#include <plat/gpio-nomadik.h>
-#include <plat/pincfg.h>
+#include <linux/platform_data/pinctrl-nomadik.h>
 
 /*
  * There are two busses in the 8815NHK.
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 48d5e41..3785906 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -580,6 +580,11 @@
 	} else
 		return;
 
+	/* Make sure that the GPIO pins are muxed correctly */
+	omap_mux_init_gpio(igep_wlan_bt_gpios[0].gpio, OMAP_PIN_OUTPUT);
+	omap_mux_init_gpio(igep_wlan_bt_gpios[1].gpio, OMAP_PIN_OUTPUT);
+	omap_mux_init_gpio(igep_wlan_bt_gpios[2].gpio, OMAP_PIN_OUTPUT);
+
 	err = gpio_request_array(igep_wlan_bt_gpios,
 				 ARRAY_SIZE(igep_wlan_bt_gpios));
 	if (err) {
diff --git a/arch/arm/mach-omap2/clockdomains44xx_data.c b/arch/arm/mach-omap2/clockdomains44xx_data.c
index b56d06b..95192a06 100644
--- a/arch/arm/mach-omap2/clockdomains44xx_data.c
+++ b/arch/arm/mach-omap2/clockdomains44xx_data.c
@@ -359,7 +359,7 @@
 	.clkdm_offs	  = OMAP4430_CM2_CAM_CAM_CDOFFS,
 	.wkdep_srcs	  = iss_wkup_sleep_deps,
 	.sleepdep_srcs	  = iss_wkup_sleep_deps,
-	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+	.flags		  = CLKDM_CAN_SWSUP,
 };
 
 static struct clockdomain l3_dss_44xx_clkdm = {
diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c
index 48daac2..84551f2 100644
--- a/arch/arm/mach-omap2/common-board-devices.c
+++ b/arch/arm/mach-omap2/common-board-devices.c
@@ -64,30 +64,36 @@
 	struct spi_board_info *spi_bi = &ads7846_spi_board_info;
 	int err;
 
-	err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown");
-	if (err) {
-		pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err);
-		return;
-	}
+	/*
+	 * If a board defines get_pendown_state() function, request the pendown
+	 * GPIO and set the GPIO debounce time.
+	 * If a board does not define the get_pendown_state() function, then
+	 * the ads7846 driver will setup the pendown GPIO itself.
+	 */
+	if (board_pdata && board_pdata->get_pendown_state) {
+		err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown");
+		if (err) {
+			pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err);
+			return;
+		}
 
-	if (gpio_debounce)
-		gpio_set_debounce(gpio_pendown, gpio_debounce);
+		if (gpio_debounce)
+			gpio_set_debounce(gpio_pendown, gpio_debounce);
+
+		gpio_export(gpio_pendown, 0);
+	}
 
 	spi_bi->bus_num	= bus_num;
 	spi_bi->irq	= gpio_to_irq(gpio_pendown);
 
+	ads7846_config.gpio_pendown = gpio_pendown;
+
 	if (board_pdata) {
 		board_pdata->gpio_pendown = gpio_pendown;
+		board_pdata->gpio_pendown_debounce = gpio_debounce;
 		spi_bi->platform_data = board_pdata;
-		if (board_pdata->get_pendown_state)
-			gpio_export(gpio_pendown, 0);
-	} else {
-		ads7846_config.gpio_pendown = gpio_pendown;
 	}
 
-	if (!board_pdata || (board_pdata && !board_pdata->get_pendown_state))
-		gpio_free(gpio_pendown);
-
 	spi_register_board_info(&ads7846_spi_board_info, 1);
 }
 #else
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index cba60e05..c72b5a7 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -19,6 +19,7 @@
 #include <linux/of.h>
 #include <linux/pinctrl/machine.h>
 #include <linux/platform_data/omap4-keypad.h>
+#include <linux/platform_data/omap_ocp2scp.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
@@ -613,6 +614,83 @@
 static inline void omap_init_vout(void) {}
 #endif
 
+#if defined(CONFIG_OMAP_OCP2SCP) || defined(CONFIG_OMAP_OCP2SCP_MODULE)
+static int count_ocp2scp_devices(struct omap_ocp2scp_dev *ocp2scp_dev)
+{
+	int cnt	= 0;
+
+	while (ocp2scp_dev->drv_name != NULL) {
+		cnt++;
+		ocp2scp_dev++;
+	}
+
+	return cnt;
+}
+
+static void omap_init_ocp2scp(void)
+{
+	struct omap_hwmod	*oh;
+	struct platform_device	*pdev;
+	int			bus_id = -1, dev_cnt = 0, i;
+	struct omap_ocp2scp_dev	*ocp2scp_dev;
+	const char		*oh_name, *name;
+	struct omap_ocp2scp_platform_data *pdata;
+
+	if (!cpu_is_omap44xx())
+		return;
+
+	oh_name = "ocp2scp_usb_phy";
+	name	= "omap-ocp2scp";
+
+	oh = omap_hwmod_lookup(oh_name);
+	if (!oh) {
+		pr_err("%s: could not find omap_hwmod for %s\n", __func__,
+								oh_name);
+		return;
+	}
+
+	pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
+	if (!pdata) {
+		pr_err("%s: No memory for ocp2scp pdata\n", __func__);
+		return;
+	}
+
+	ocp2scp_dev = oh->dev_attr;
+	dev_cnt = count_ocp2scp_devices(ocp2scp_dev);
+
+	if (!dev_cnt) {
+		pr_err("%s: No devices connected to ocp2scp\n", __func__);
+		kfree(pdata);
+		return;
+	}
+
+	pdata->devices = kzalloc(sizeof(struct omap_ocp2scp_dev *)
+					* dev_cnt, GFP_KERNEL);
+	if (!pdata->devices) {
+		pr_err("%s: No memory for ocp2scp pdata devices\n", __func__);
+		kfree(pdata);
+		return;
+	}
+
+	for (i = 0; i < dev_cnt; i++, ocp2scp_dev++)
+		pdata->devices[i] = ocp2scp_dev;
+
+	pdata->dev_cnt	= dev_cnt;
+
+	pdev = omap_device_build(name, bus_id, oh, pdata, sizeof(*pdata), NULL,
+								0, false);
+	if (IS_ERR(pdev)) {
+		pr_err("Could not build omap_device for %s %s\n",
+						name, oh_name);
+		kfree(pdata->devices);
+		kfree(pdata);
+		return;
+	}
+}
+#else
+static inline void omap_init_ocp2scp(void) { }
+#endif
+
 /*-------------------------------------------------------------------------*/
 
 static int __init omap2_init_devices(void)
@@ -640,6 +718,7 @@
 	omap_init_sham();
 	omap_init_aes();
 	omap_init_vout();
+	omap_init_ocp2scp();
 
 	return 0;
 }
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index b969ab1..87cc6d0 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -422,6 +422,38 @@
 }
 
 /**
+ * _wait_softreset_complete - wait for an OCP softreset to complete
+ * @oh: struct omap_hwmod * to wait on
+ *
+ * Wait until the IP block represented by @oh reports that its OCP
+ * softreset is complete.  This can be triggered by software (see
+ * _ocp_softreset()) or by hardware upon returning from off-mode (one
+ * example is HSMMC).  Waits for up to MAX_MODULE_SOFTRESET_WAIT
+ * microseconds.  Returns the number of microseconds waited.
+ */
+static int _wait_softreset_complete(struct omap_hwmod *oh)
+{
+	struct omap_hwmod_class_sysconfig *sysc;
+	u32 softrst_mask;
+	int c = 0;
+
+	sysc = oh->class->sysc;
+
+	if (sysc->sysc_flags & SYSS_HAS_RESET_STATUS)
+		omap_test_timeout((omap_hwmod_read(oh, sysc->syss_offs)
+				   & SYSS_RESETDONE_MASK),
+				  MAX_MODULE_SOFTRESET_WAIT, c);
+	else if (sysc->sysc_flags & SYSC_HAS_RESET_STATUS) {
+		softrst_mask = (0x1 << sysc->sysc_fields->srst_shift);
+		omap_test_timeout(!(omap_hwmod_read(oh, sysc->sysc_offs)
+				    & softrst_mask),
+				  MAX_MODULE_SOFTRESET_WAIT, c);
+	}
+
+	return c;
+}
+
+/**
  * _set_dmadisable: set OCP_SYSCONFIG.DMADISABLE bit in @v
  * @oh: struct omap_hwmod *
  *
@@ -1282,6 +1314,18 @@
 	if (!oh->class->sysc)
 		return;
 
+	/*
+	 * Wait until reset has completed, this is needed as the IP
+	 * block is reset automatically by hardware in some cases
+	 * (off-mode for example), and the drivers require the
+	 * IP to be ready when they access it
+	 */
+	if (oh->flags & HWMOD_CONTROL_OPT_CLKS_IN_RESET)
+		_enable_optional_clocks(oh);
+	_wait_softreset_complete(oh);
+	if (oh->flags & HWMOD_CONTROL_OPT_CLKS_IN_RESET)
+		_disable_optional_clocks(oh);
+
 	v = oh->_sysc_cache;
 	sf = oh->class->sysc->sysc_flags;
 
@@ -1804,7 +1848,7 @@
  */
 static int _ocp_softreset(struct omap_hwmod *oh)
 {
-	u32 v, softrst_mask;
+	u32 v;
 	int c = 0;
 	int ret = 0;
 
@@ -1834,19 +1878,7 @@
 	if (oh->class->sysc->srst_udelay)
 		udelay(oh->class->sysc->srst_udelay);
 
-	if (oh->class->sysc->sysc_flags & SYSS_HAS_RESET_STATUS)
-		omap_test_timeout((omap_hwmod_read(oh,
-						    oh->class->sysc->syss_offs)
-				   & SYSS_RESETDONE_MASK),
-				  MAX_MODULE_SOFTRESET_WAIT, c);
-	else if (oh->class->sysc->sysc_flags & SYSC_HAS_RESET_STATUS) {
-		softrst_mask = (0x1 << oh->class->sysc->sysc_fields->srst_shift);
-		omap_test_timeout(!(omap_hwmod_read(oh,
-						     oh->class->sysc->sysc_offs)
-				   & softrst_mask),
-				  MAX_MODULE_SOFTRESET_WAIT, c);
-	}
-
+	c = _wait_softreset_complete(oh);
 	if (c == MAX_MODULE_SOFTRESET_WAIT)
 		pr_warning("omap_hwmod: %s: softreset failed (waited %d usec)\n",
 			   oh->name, MAX_MODULE_SOFTRESET_WAIT);
@@ -2352,6 +2384,9 @@
 	if (oh->_state != _HWMOD_STATE_INITIALIZED)
 		return -EINVAL;
 
+	if (oh->flags & HWMOD_EXT_OPT_MAIN_CLK)
+		return -EPERM;
+
 	if (oh->rst_lines_cnt == 0) {
 		r = _enable(oh);
 		if (r) {
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 652d028..0b1249e 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -21,6 +21,7 @@
 #include <linux/io.h>
 #include <linux/platform_data/gpio-omap.h>
 #include <linux/power/smartreflex.h>
+#include <linux/platform_data/omap_ocp2scp.h>
 
 #include <plat/omap_hwmod.h>
 #include <plat/i2c.h>
@@ -2125,6 +2126,14 @@
 	.name		= "mcpdm",
 	.class		= &omap44xx_mcpdm_hwmod_class,
 	.clkdm_name	= "abe_clkdm",
+	/*
+	 * It's suspected that the McPDM requires an off-chip main
+	 * functional clock, controlled via I2C.  This IP block is
+	 * currently reset very early during boot, before I2C is
+	 * available, so it doesn't seem that we have any choice in
+	 * the kernel other than to avoid resetting it.
+	 */
+	.flags		= HWMOD_EXT_OPT_MAIN_CLK,
 	.mpu_irqs	= omap44xx_mcpdm_irqs,
 	.sdma_reqs	= omap44xx_mcpdm_sdma_reqs,
 	.main_clk	= "mcpdm_fck",
@@ -2681,6 +2690,32 @@
 	.sysc	= &omap44xx_ocp2scp_sysc,
 };
 
+/* ocp2scp dev_attr */
+static struct resource omap44xx_usb_phy_and_pll_addrs[] = {
+	{
+		.name		= "usb_phy",
+		.start		= 0x4a0ad080,
+		.end		= 0x4a0ae000,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		/* XXX: Remove this once control module driver is in place */
+		.name		= "ctrl_dev",
+		.start		= 0x4a002300,
+		.end		= 0x4a002303,
+		.flags		= IORESOURCE_MEM,
+	},
+	{ }
+};
+
+static struct omap_ocp2scp_dev ocp2scp_dev_attr[] = {
+	{
+		.drv_name       = "omap-usb2",
+		.res		= omap44xx_usb_phy_and_pll_addrs,
+	},
+	{ }
+};
+
 /* ocp2scp_usb_phy */
 static struct omap_hwmod omap44xx_ocp2scp_usb_phy_hwmod = {
 	.name		= "ocp2scp_usb_phy",
@@ -2694,6 +2729,7 @@
 			.modulemode   = MODULEMODE_HWCTRL,
 		},
 	},
+	.dev_attr	= ocp2scp_dev_attr,
 };
 
 /*
diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index 635e109..a256135 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -73,6 +73,7 @@
 {
 	/* PMIC part*/
 	omap_mux_init_signal("sys_nirq1", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE);
+	omap_mux_init_signal("fref_clk0_out.sys_drm_msecure", OMAP_PIN_OUTPUT);
 	omap_pmic_init(1, 400, pmic_type, 7 + OMAP44XX_IRQ_GIC_START, pmic_data);
 
 	/* Register additional devices on i2c1 bus if needed */
@@ -366,7 +367,7 @@
 };
 
 static struct regulator_consumer_supply omap4_vdd1_supply[] = {
-	REGULATOR_SUPPLY("vcc", "mpu.0"),
+	REGULATOR_SUPPLY("vcc", "cpu0"),
 };
 
 static struct regulator_consumer_supply omap4_vdd2_supply[] = {
diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c
index 880249b..75878c3 100644
--- a/arch/arm/mach-omap2/vc.c
+++ b/arch/arm/mach-omap2/vc.c
@@ -264,7 +264,7 @@
 
 	if (initialized) {
 		if (voltdm->pmic->i2c_high_speed != i2c_high_speed)
-			pr_warn("%s: I2C config for vdd_%s does not match other channels (%u).",
+			pr_warn("%s: I2C config for vdd_%s does not match other channels (%u).\n",
 				__func__, voltdm->name, i2c_high_speed);
 		return;
 	}
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index 5ecbd17..e2c6391 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -28,6 +28,7 @@
 #include <linux/mfd/asic3.h>
 #include <linux/mtd/physmap.h>
 #include <linux/pda_power.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/gpio-regulator.h>
@@ -556,7 +557,7 @@
  */
 
 static struct platform_pwm_backlight_data backlight_data = {
-	.pwm_id         = 1,
+	.pwm_id         = -1,	/* Superseded by pwm_lookup */
 	.max_brightness = 200,
 	.dft_brightness = 100,
 	.pwm_period_ns  = 30923,
@@ -571,6 +572,10 @@
 	},
 };
 
+static struct pwm_lookup hx4700_pwm_lookup[] = {
+	PWM_LOOKUP("pxa27x-pwm.1", 0, "pwm-backlight", NULL),
+};
+
 /*
  * USB "Transceiver"
  */
@@ -872,6 +877,7 @@
 	pxa_set_stuart_info(NULL);
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
+	pwm_add_table(hx4700_pwm_lookup, ARRAY_SIZE(hx4700_pwm_lookup));
 
 	pxa_set_ficp_info(&ficp_info);
 	pxa27x_set_i2c_power_info(NULL);
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index 438f02f..842596d 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -86,10 +86,7 @@
 	gpio_set_value(SPITZ_GPIO_LED_GREEN, on);
 }
 
-static unsigned long gpio18_config[] = {
-	GPIO18_RDY,
-	GPIO18_GPIO,
-};
+static unsigned long gpio18_config = GPIO18_GPIO;
 
 static void spitz_presuspend(void)
 {
@@ -112,7 +109,7 @@
 	PGSR3 &= ~SPITZ_GPIO_G3_STROBE_BIT;
 	PGSR2 |= GPIO_bit(SPITZ_GPIO_KEY_STROBE0);
 
-	pxa2xx_mfp_config(&gpio18_config[0], 1);
+	pxa2xx_mfp_config(&gpio18_config, 1);
 	gpio_request_one(18, GPIOF_OUT_INIT_HIGH, "Unknown");
 	gpio_free(18);
 
@@ -131,7 +128,6 @@
 
 static void spitz_postsuspend(void)
 {
-	pxa2xx_mfp_config(&gpio18_config[1], 1);
 }
 
 static int spitz_should_wakeup(unsigned int resume_on_alarm)
diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c
index 0a43f31..7a05de7 100644
--- a/arch/arm/mach-shmobile/board-kzm9g.c
+++ b/arch/arm/mach-shmobile/board-kzm9g.c
@@ -548,7 +548,6 @@
 /* I2C */
 static struct pcf857x_platform_data pcf8575_pdata = {
 	.gpio_base	= GPIO_PCF8575_BASE,
-	.irq		= intcs_evt2irq(0x3260), /* IRQ19 */
 };
 
 static struct i2c_board_info i2c0_devices[] = {
@@ -570,6 +569,7 @@
 static struct i2c_board_info i2c3_devices[] = {
 	{
 		I2C_BOARD_INFO("pcf8575", 0x20),
+		.irq		= intcs_evt2irq(0x3260), /* IRQ19 */
 		.platform_data = &pcf8575_pdata,
 	},
 };
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index b8efac4..ece8a2d 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -1445,8 +1445,6 @@
 static struct u300_gpio_platform u300_gpio_plat = {
 	.ports = 7,
 	.gpio_base = 0,
-	.gpio_irq_base = IRQ_U300_GPIO_BASE,
-	.pinctrl_device = &pinctrl_device,
 };
 
 static struct platform_device gpio_device = {
@@ -1590,6 +1588,7 @@
 	&i2c1_device,
 	&keypad_device,
 	&rtc_device,
+	&pinctrl_device,
 	&gpio_device,
 	&nand_device,
 	&wdog_device,
@@ -1804,7 +1803,7 @@
 	/* Maintainer: Linus Walleij <linus.walleij@stericsson.com> */
 	.atag_offset	= 0x100,
 	.map_io		= u300_map_io,
-	.nr_irqs	= NR_IRQS_U300,
+	.nr_irqs	= 0,
 	.init_irq	= u300_init_irq,
 	.handle_irq	= vic_handle_irq,
 	.timer		= &u300_timer,
diff --git a/arch/arm/mach-u300/include/mach/irqs.h b/arch/arm/mach-u300/include/mach/irqs.h
index e27425a..21d5e76 100644
--- a/arch/arm/mach-u300/include/mach/irqs.h
+++ b/arch/arm/mach-u300/include/mach/irqs.h
@@ -12,79 +12,69 @@
 #ifndef __MACH_IRQS_H
 #define __MACH_IRQS_H
 
-#define IRQ_U300_INTCON0_START		1
-#define IRQ_U300_INTCON1_START		33
+#define IRQ_U300_INTCON0_START		32
+#define IRQ_U300_INTCON1_START		64
 /* These are on INTCON0 - 30 lines */
-#define IRQ_U300_IRQ0_EXT		1
-#define IRQ_U300_IRQ1_EXT		2
-#define IRQ_U300_DMA			3
-#define IRQ_U300_VIDEO_ENC_0		4
-#define IRQ_U300_VIDEO_ENC_1		5
-#define IRQ_U300_AAIF_RX		6
-#define IRQ_U300_AAIF_TX		7
-#define IRQ_U300_AAIF_VGPIO		8
-#define IRQ_U300_AAIF_WAKEUP		9
-#define IRQ_U300_PCM_I2S0_FRAME		10
-#define IRQ_U300_PCM_I2S0_FIFO		11
-#define IRQ_U300_PCM_I2S1_FRAME		12
-#define IRQ_U300_PCM_I2S1_FIFO		13
-#define IRQ_U300_XGAM_GAMCON		14
-#define IRQ_U300_XGAM_CDI		15
-#define IRQ_U300_XGAM_CDICON		16
-#define IRQ_U300_XGAM_PDI		18
-#define IRQ_U300_XGAM_PDICON		19
-#define IRQ_U300_XGAM_GAMEACC		20
-#define IRQ_U300_XGAM_MCIDCT		21
-#define IRQ_U300_APEX			22
-#define IRQ_U300_UART0			23
-#define IRQ_U300_SPI			24
-#define IRQ_U300_TIMER_APP_OS		25
-#define IRQ_U300_TIMER_APP_DD		26
-#define IRQ_U300_TIMER_APP_GP1		27
-#define IRQ_U300_TIMER_APP_GP2		28
-#define IRQ_U300_TIMER_OS		29
-#define IRQ_U300_TIMER_MS		30
-#define IRQ_U300_KEYPAD_KEYBF		31
-#define IRQ_U300_KEYPAD_KEYBR		32
+#define IRQ_U300_IRQ0_EXT		32
+#define IRQ_U300_IRQ1_EXT		33
+#define IRQ_U300_DMA			34
+#define IRQ_U300_VIDEO_ENC_0		35
+#define IRQ_U300_VIDEO_ENC_1		36
+#define IRQ_U300_AAIF_RX		37
+#define IRQ_U300_AAIF_TX		38
+#define IRQ_U300_AAIF_VGPIO		39
+#define IRQ_U300_AAIF_WAKEUP		40
+#define IRQ_U300_PCM_I2S0_FRAME		41
+#define IRQ_U300_PCM_I2S0_FIFO		42
+#define IRQ_U300_PCM_I2S1_FRAME		43
+#define IRQ_U300_PCM_I2S1_FIFO		44
+#define IRQ_U300_XGAM_GAMCON		45
+#define IRQ_U300_XGAM_CDI		46
+#define IRQ_U300_XGAM_CDICON		47
+#define IRQ_U300_XGAM_PDI		49
+#define IRQ_U300_XGAM_PDICON		50
+#define IRQ_U300_XGAM_GAMEACC		51
+#define IRQ_U300_XGAM_MCIDCT		52
+#define IRQ_U300_APEX			53
+#define IRQ_U300_UART0			54
+#define IRQ_U300_SPI			55
+#define IRQ_U300_TIMER_APP_OS		56
+#define IRQ_U300_TIMER_APP_DD		57
+#define IRQ_U300_TIMER_APP_GP1		58
+#define IRQ_U300_TIMER_APP_GP2		59
+#define IRQ_U300_TIMER_OS		60
+#define IRQ_U300_TIMER_MS		61
+#define IRQ_U300_KEYPAD_KEYBF		62
+#define IRQ_U300_KEYPAD_KEYBR		63
 /* These are on INTCON1 - 32 lines */
-#define IRQ_U300_GPIO_PORT0		33
-#define IRQ_U300_GPIO_PORT1		34
-#define IRQ_U300_GPIO_PORT2		35
+#define IRQ_U300_GPIO_PORT0		64
+#define IRQ_U300_GPIO_PORT1		65
+#define IRQ_U300_GPIO_PORT2		66
 
 /* These are for DB3150, DB3200 and DB3350 */
-#define IRQ_U300_WDOG			36
-#define IRQ_U300_EVHIST			37
-#define IRQ_U300_MSPRO			38
-#define IRQ_U300_MMCSD_MCIINTR0		39
-#define IRQ_U300_MMCSD_MCIINTR1		40
-#define IRQ_U300_I2C0			41
-#define IRQ_U300_I2C1			42
-#define IRQ_U300_RTC			43
-#define IRQ_U300_NFIF			44
-#define IRQ_U300_NFIF2			45
+#define IRQ_U300_WDOG			67
+#define IRQ_U300_EVHIST			68
+#define IRQ_U300_MSPRO			69
+#define IRQ_U300_MMCSD_MCIINTR0		70
+#define IRQ_U300_MMCSD_MCIINTR1		71
+#define IRQ_U300_I2C0			72
+#define IRQ_U300_I2C1			73
+#define IRQ_U300_RTC			74
+#define IRQ_U300_NFIF			75
+#define IRQ_U300_NFIF2			76
 
 /* The DB3350-specific interrupt lines */
-#define IRQ_U300_ISP_F0			46
-#define IRQ_U300_ISP_F1			47
-#define IRQ_U300_ISP_F2			48
-#define IRQ_U300_ISP_F3			49
-#define IRQ_U300_ISP_F4			50
-#define IRQ_U300_GPIO_PORT3		51
-#define IRQ_U300_SYSCON_PLL_LOCK	52
-#define IRQ_U300_UART1			53
-#define IRQ_U300_GPIO_PORT4		54
-#define IRQ_U300_GPIO_PORT5		55
-#define IRQ_U300_GPIO_PORT6		56
-#define U300_VIC_IRQS_END		57
-
-/* Maximum 8*7 GPIO lines */
-#ifdef CONFIG_PINCTRL_COH901
-#define IRQ_U300_GPIO_BASE		(U300_VIC_IRQS_END)
-#define IRQ_U300_GPIO_END		(IRQ_U300_GPIO_BASE + 56)
-#else
-#define IRQ_U300_GPIO_END		(U300_VIC_IRQS_END)
-#endif
-
-#define NR_IRQS_U300			(IRQ_U300_GPIO_END - IRQ_U300_INTCON0_START)
+#define IRQ_U300_ISP_F0			77
+#define IRQ_U300_ISP_F1			78
+#define IRQ_U300_ISP_F2			79
+#define IRQ_U300_ISP_F3			80
+#define IRQ_U300_ISP_F4			81
+#define IRQ_U300_GPIO_PORT3		82
+#define IRQ_U300_SYSCON_PLL_LOCK	83
+#define IRQ_U300_UART1			84
+#define IRQ_U300_GPIO_PORT4		85
+#define IRQ_U300_GPIO_PORT5		86
+#define IRQ_U300_GPIO_PORT6		87
+#define U300_VIC_IRQS_END		88
 
 #endif
diff --git a/arch/arm/mach-ux500/board-mop500-audio.c b/arch/arm/mach-ux500/board-mop500-audio.c
index 070629a..33631c9 100644
--- a/arch/arm/mach-ux500/board-mop500-audio.c
+++ b/arch/arm/mach-ux500/board-mop500-audio.c
@@ -7,9 +7,8 @@
 #include <linux/platform_device.h>
 #include <linux/init.h>
 #include <linux/gpio.h>
+#include <linux/platform_data/pinctrl-nomadik.h>
 
-#include <plat/gpio-nomadik.h>
-#include <plat/pincfg.h>
 #include <plat/ste_dma40.h>
 
 #include <mach/devices.h>
diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c
index a267c6d..c34d4ef 100644
--- a/arch/arm/mach-ux500/board-mop500-pins.c
+++ b/arch/arm/mach-ux500/board-mop500-pins.c
@@ -9,10 +9,9 @@
 #include <linux/bug.h>
 #include <linux/string.h>
 #include <linux/pinctrl/machine.h>
+#include <linux/platform_data/pinctrl-nomadik.h>
 
 #include <asm/mach-types.h>
-#include <plat/pincfg.h>
-#include <plat/gpio-nomadik.h>
 
 #include <mach/hardware.h>
 
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 416d436..0a3dd60 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -37,13 +37,13 @@
 #include <linux/of_platform.h>
 #include <linux/leds.h>
 #include <linux/pinctrl/consumer.h>
+#include <linux/platform_data/pinctrl-nomadik.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/hardware/gic.h>
 
 #include <plat/ste_dma40.h>
-#include <plat/gpio-nomadik.h>
 
 #include <mach/hardware.h>
 #include <mach/setup.h>
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index bcdfe6b..91f028c 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -17,14 +17,14 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/mfd/abx500/ab8500.h>
+#include <linux/platform_data/usb-musb-ux500.h>
+#include <linux/platform_data/pinctrl-nomadik.h>
 
 #include <asm/pmu.h>
 #include <asm/mach/map.h>
-#include <plat/gpio-nomadik.h>
 #include <mach/hardware.h>
 #include <mach/setup.h>
 #include <mach/devices.h>
-#include <linux/platform_data/usb-musb-ux500.h>
 #include <mach/db8500-regs.h>
 
 #include "devices-db8500.h"
@@ -158,7 +158,7 @@
 
 	dbx500_add_gpios(parent, ARRAY_AND_SIZE(db8500_gpio_base),
 			 IRQ_DB8500_GPIO0, &pdata);
-	dbx500_add_pinctrl(parent, "pinctrl-db8500");
+	dbx500_add_pinctrl(parent, "pinctrl-db8500", U8500_PRCMU_BASE);
 }
 
 static int usb_db8500_rx_dma_cfg[] = {
@@ -214,9 +214,6 @@
 	db8500_add_gpios(parent);
 	db8500_add_usb(parent, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg);
 
-	platform_device_register_data(parent,
-		"cpufreq-u8500", -1, NULL, 0);
-
 	for (i = 0; i < ARRAY_SIZE(platform_devs); i++)
 		platform_devs[i]->dev.parent = parent;
 
@@ -236,9 +233,6 @@
 
 	db8500_add_usb(parent, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg);
 
-	platform_device_register_data(parent,
-		"cpufreq-u8500", -1, NULL, 0);
-
 	u8500_dma40_device.dev.parent = parent;
 
 	/*
diff --git a/arch/arm/mach-ux500/devices-common.c b/arch/arm/mach-ux500/devices-common.c
index dfdd4a5..692a77a 100644
--- a/arch/arm/mach-ux500/devices-common.c
+++ b/arch/arm/mach-ux500/devices-common.c
@@ -11,8 +11,7 @@
 #include <linux/irq.h>
 #include <linux/slab.h>
 #include <linux/platform_device.h>
-
-#include <plat/gpio-nomadik.h>
+#include <linux/platform_data/pinctrl-nomadik.h>
 
 #include <mach/hardware.h>
 
diff --git a/arch/arm/mach-ux500/devices-common.h b/arch/arm/mach-ux500/devices-common.h
index 7fbf0ba..96fa4ac 100644
--- a/arch/arm/mach-ux500/devices-common.h
+++ b/arch/arm/mach-ux500/devices-common.h
@@ -129,12 +129,18 @@
 		      int irq, struct nmk_gpio_platform_data *pdata);
 
 static inline void
-dbx500_add_pinctrl(struct device *parent, const char *name)
+dbx500_add_pinctrl(struct device *parent, const char *name,
+		   resource_size_t base)
 {
+	struct resource res[] = {
+		DEFINE_RES_MEM(base, SZ_8K),
+	};
 	struct platform_device_info pdevinfo = {
 		.parent = parent,
 		.name = name,
 		.id = -1,
+		.res = res,
+		.num_res = ARRAY_SIZE(res),
 	};
 
 	platform_device_register_full(&pdevinfo);
diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
index 560e0df..359f782 100644
--- a/arch/arm/mach-vexpress/v2m.c
+++ b/arch/arm/mach-vexpress/v2m.c
@@ -589,7 +589,7 @@
 		return;
 
 	/* Confirm board type against DT property, if available */
-	if (of_property_read_u32(allnodes, "arm,hbi", &dt_hbi) == 0) {
+	if (of_property_read_u32(of_allnodes, "arm,hbi", &dt_hbi) == 0) {
 		int site = v2m_get_master_site();
 		u32 id = readl(v2m_sysreg_base + (site == SYS_CFG_SITE_DB2 ?
 				V2M_SYS_PROCID1 : V2M_SYS_PROCID0));
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index 86b8b48..09c5233 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -89,7 +89,7 @@
 	mov	pc, lr
 
 /*
- *	cpu_arm926_switch_mm(pgd_phys, tsk)
+ *	cpu_v6_switch_mm(pgd_phys, tsk)
  *
  *	Set the translation table base pointer to be pgd_phys
  *
diff --git a/arch/arm/plat-nomadik/include/plat/gpio-nomadik.h b/arch/arm/plat-nomadik/include/plat/gpio-nomadik.h
deleted file mode 100644
index c08a54d..0000000
--- a/arch/arm/plat-nomadik/include/plat/gpio-nomadik.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * Structures and registers for GPIO access in the Nomadik SoC
- *
- * Copyright (C) 2008 STMicroelectronics
- *     Author: Prafulla WADASKAR <prafulla.wadaskar@st.com>
- * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __PLAT_NOMADIK_GPIO
-#define __PLAT_NOMADIK_GPIO
-
-/*
- * "nmk_gpio" and "NMK_GPIO" stand for "Nomadik GPIO", leaving
- * the "gpio" namespace for generic and cross-machine functions
- */
-
-/* Register in the logic block */
-#define NMK_GPIO_DAT	0x00
-#define NMK_GPIO_DATS	0x04
-#define NMK_GPIO_DATC	0x08
-#define NMK_GPIO_PDIS	0x0c
-#define NMK_GPIO_DIR	0x10
-#define NMK_GPIO_DIRS	0x14
-#define NMK_GPIO_DIRC	0x18
-#define NMK_GPIO_SLPC	0x1c
-#define NMK_GPIO_AFSLA	0x20
-#define NMK_GPIO_AFSLB	0x24
-#define NMK_GPIO_LOWEMI	0x28
-
-#define NMK_GPIO_RIMSC	0x40
-#define NMK_GPIO_FIMSC	0x44
-#define NMK_GPIO_IS	0x48
-#define NMK_GPIO_IC	0x4c
-#define NMK_GPIO_RWIMSC	0x50
-#define NMK_GPIO_FWIMSC	0x54
-#define NMK_GPIO_WKS	0x58
-
-/* Alternate functions: function C is set in hw by setting both A and B */
-#define NMK_GPIO_ALT_GPIO	0
-#define NMK_GPIO_ALT_A	1
-#define NMK_GPIO_ALT_B	2
-#define NMK_GPIO_ALT_C	(NMK_GPIO_ALT_A | NMK_GPIO_ALT_B)
-
-#define NMK_GPIO_ALT_CX_SHIFT 2
-#define NMK_GPIO_ALT_C1	((1<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C)
-#define NMK_GPIO_ALT_C2	((2<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C)
-#define NMK_GPIO_ALT_C3	((3<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C)
-#define NMK_GPIO_ALT_C4	((4<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C)
-
-/* Pull up/down values */
-enum nmk_gpio_pull {
-	NMK_GPIO_PULL_NONE,
-	NMK_GPIO_PULL_UP,
-	NMK_GPIO_PULL_DOWN,
-};
-
-/* Sleep mode */
-enum nmk_gpio_slpm {
-	NMK_GPIO_SLPM_INPUT,
-	NMK_GPIO_SLPM_WAKEUP_ENABLE = NMK_GPIO_SLPM_INPUT,
-	NMK_GPIO_SLPM_NOCHANGE,
-	NMK_GPIO_SLPM_WAKEUP_DISABLE = NMK_GPIO_SLPM_NOCHANGE,
-};
-
-extern int nmk_gpio_set_slpm(int gpio, enum nmk_gpio_slpm mode);
-extern int nmk_gpio_set_pull(int gpio, enum nmk_gpio_pull pull);
-#ifdef CONFIG_PINCTRL_NOMADIK
-extern int nmk_gpio_set_mode(int gpio, int gpio_mode);
-#else
-static inline int nmk_gpio_set_mode(int gpio, int gpio_mode)
-{
-	return -ENODEV;
-}
-#endif
-extern int nmk_gpio_get_mode(int gpio);
-
-extern void nmk_gpio_wakeups_suspend(void);
-extern void nmk_gpio_wakeups_resume(void);
-
-extern void nmk_gpio_clocks_enable(void);
-extern void nmk_gpio_clocks_disable(void);
-
-extern void nmk_gpio_read_pull(int gpio_bank, u32 *pull_up);
-
-/*
- * Platform data to register a block: only the initial gpio/irq number.
- */
-struct nmk_gpio_platform_data {
-	char *name;
-	int first_gpio;
-	int first_irq;
-	int num_gpio;
-	u32 (*get_secondary_status)(unsigned int bank);
-	void (*set_ioforce)(bool enable);
-	bool supports_sleepmode;
-};
-
-#endif /* __PLAT_NOMADIK_GPIO */
diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
index a5683a8..6013831 100644
--- a/arch/arm/plat-omap/i2c.c
+++ b/arch/arm/plat-omap/i2c.c
@@ -26,12 +26,14 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
+#include <linux/i2c-omap.h>
 #include <linux/slab.h>
 #include <linux/err.h>
 #include <linux/clk.h>
 
 #include <mach/irqs.h>
 #include <plat/i2c.h>
+#include <plat/omap-pm.h>
 #include <plat/omap_device.h>
 
 #define OMAP_I2C_SIZE		0x3f
@@ -127,6 +129,16 @@
 
 
 #ifdef CONFIG_ARCH_OMAP2PLUS
+/*
+ * XXX This function is a temporary compatibility wrapper - only
+ * needed until the I2C driver can be converted to call
+ * omap_pm_set_max_dev_wakeup_lat() and handle a return code.
+ */
+static void omap_pm_set_max_mpu_wakeup_lat_compat(struct device *dev, long t)
+{
+	omap_pm_set_max_mpu_wakeup_lat(dev, t);
+}
+
 static inline int omap2_i2c_add_bus(int bus_id)
 {
 	int l;
@@ -158,6 +170,15 @@
 	dev_attr = (struct omap_i2c_dev_attr *)oh->dev_attr;
 	pdata->flags = dev_attr->flags;
 
+	/*
+	 * When waiting for completion of a i2c transfer, we need to
+	 * set a wake up latency constraint for the MPU. This is to
+	 * ensure quick enough wakeup from idle, when transfer
+	 * completes.
+	 * Only omap3 has support for constraints
+	 */
+	if (cpu_is_omap34xx())
+		pdata->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat_compat;
 	pdev = omap_device_build(name, bus_id, oh, pdata,
 			sizeof(struct omap_i2c_bus_platform_data),
 			NULL, 0, 0);
diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h
index 8b4e4f2..346af5b 100644
--- a/arch/arm/plat-omap/include/plat/mmc.h
+++ b/arch/arm/plat-omap/include/plat/mmc.h
@@ -126,6 +126,7 @@
 		/* we can put the features above into this variable */
 #define HSMMC_HAS_PBIAS		(1 << 0)
 #define HSMMC_HAS_UPDATED_RESET	(1 << 1)
+#define HSMMC_HAS_HSPE_SUPPORT	(1 << 2)
 		unsigned features;
 
 		int switch_pin;			/* gpio (card detect) */
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index b3349f7..1db0294 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -443,6 +443,11 @@
  *     in order to complete the reset. Optional clocks will be disabled
  *     again after the reset.
  * HWMOD_16BIT_REG: Module has 16bit registers
+ * HWMOD_EXT_OPT_MAIN_CLK: The only main functional clock source for
+ *     this IP block comes from an off-chip source and is not always
+ *     enabled.  This prevents the hwmod code from being able to
+ *     enable and reset the IP block early.  XXX Eventually it should
+ *     be possible to query the clock framework for this information.
  */
 #define HWMOD_SWSUP_SIDLE			(1 << 0)
 #define HWMOD_SWSUP_MSTANDBY			(1 << 1)
@@ -453,6 +458,7 @@
 #define HWMOD_NO_IDLEST				(1 << 6)
 #define HWMOD_CONTROL_OPT_CLKS_IN_RESET		(1 << 7)
 #define HWMOD_16BIT_REG				(1 << 8)
+#define HWMOD_EXT_OPT_MAIN_CLK			(1 << 9)
 
 /*
  * omap_hwmod._int_flags definitions
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index db98e70..0abd1c4 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -473,12 +473,13 @@
 		pr_debug("dma%d: %s: buffer %p queued onto non-empty channel\n",
 			 chan->number, __func__, buf);
 
-		if (chan->end == NULL)
+		if (chan->end == NULL) {
 			pr_debug("dma%d: %s: %p not empty, and chan->end==NULL?\n",
 				 chan->number, __func__, chan);
-
-		chan->end->next = buf;
-		chan->end = buf;
+		} else {
+			chan->end->next = buf;
+			chan->end = buf;
+		}
 	}
 
 	/* if necessary, update the next buffer field */
diff --git a/arch/arm/plat-spear/Kconfig b/arch/arm/plat-spear/Kconfig
index f8db7b2..87dbd81 100644
--- a/arch/arm/plat-spear/Kconfig
+++ b/arch/arm/plat-spear/Kconfig
@@ -12,6 +12,7 @@
 	bool "ST SPEAr13xx with Device Tree"
 	select ARM_GIC
 	select CPU_V7
+	select GPIO_SPEAR_SPICS
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	select PINCTRL
diff --git a/arch/arm/tools/Makefile b/arch/arm/tools/Makefile
index cd60a81..32d05c8 100644
--- a/arch/arm/tools/Makefile
+++ b/arch/arm/tools/Makefile
@@ -5,6 +5,6 @@
 #
 
 include/generated/mach-types.h: $(src)/gen-mach-types $(src)/mach-types
-	$(kecho) '  Generating $@'
+	@$(kecho) '  Generating $@'
 	@mkdir -p $(dir $@)
 	$(Q)$(AWK) -f $^ > $@ || { rm -f $@; /bin/false; }
diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile
index 364191f..c95c5cb 100644
--- a/arch/arm64/Makefile
+++ b/arch/arm64/Makefile
@@ -41,20 +41,24 @@
 libs-y		+= $(LIBGCC)
 
 # Default target when executing plain make
-KBUILD_IMAGE := Image.gz
+KBUILD_IMAGE	:= Image.gz
+KBUILD_DTBS	:= dtbs
 
-all:	$(KBUILD_IMAGE)
+all:	$(KBUILD_IMAGE) $(KBUILD_DTBS)
 
 boot := arch/arm64/boot
 
 Image Image.gz: vmlinux
-	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
+	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
 
 zinstall install: vmlinux
-	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@
+	$(Q)$(MAKE) $(build)=$(boot) $@
 
-%.dtb:
-	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
+%.dtb: scripts
+	$(Q)$(MAKE) $(build)=$(boot)/dts $(boot)/dts/$@
+
+dtbs: scripts
+	$(Q)$(MAKE) $(build)=$(boot)/dts dtbs
 
 # We use MRPROPER_FILES and CLEAN_FILES now
 archclean:
@@ -63,6 +67,7 @@
 define archhelp
   echo  '* Image.gz      - Compressed kernel image (arch/$(ARCH)/boot/Image.gz)'
   echo  '  Image         - Uncompressed kernel image (arch/$(ARCH)/boot/Image)'
+  echo  '* dtbs          - Build device tree blobs for enabled boards'
   echo  '  install       - Install uncompressed kernel'
   echo  '  zinstall      - Install compressed kernel'
   echo  '                  Install using (your) ~/bin/installkernel or'
diff --git a/arch/arm64/boot/Makefile b/arch/arm64/boot/Makefile
index eca209b..5a0e3ab 100644
--- a/arch/arm64/boot/Makefile
+++ b/arch/arm64/boot/Makefile
@@ -22,9 +22,6 @@
 $(obj)/Image.gz: $(obj)/Image FORCE
 	$(call if_changed,gzip)
 
-$(obj)/%.dtb: $(src)/dts/%.dts
-	$(call cmd,dtc)
-
 install: $(obj)/Image
 	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
 	$(obj)/Image System.map "$(INSTALL_PATH)"
@@ -32,5 +29,3 @@
 zinstall: $(obj)/Image.gz
 	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
 	$(obj)/Image.gz System.map "$(INSTALL_PATH)"
-
-clean-files += *.dtb
diff --git a/arch/arm64/boot/dts/.gitignore b/arch/arm64/boot/dts/.gitignore
new file mode 100644
index 0000000..b60ed20
--- /dev/null
+++ b/arch/arm64/boot/dts/.gitignore
@@ -0,0 +1 @@
+*.dtb
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
new file mode 100644
index 0000000..801e2d7
--- /dev/null
+++ b/arch/arm64/boot/dts/Makefile
@@ -0,0 +1,5 @@
+targets += dtbs
+
+dtbs: $(addprefix $(obj)/, $(dtb-y))
+
+clean-files := *.dtb
diff --git a/arch/arm64/include/asm/io.h b/arch/arm64/include/asm/io.h
index 54f6116..d2f05a6 100644
--- a/arch/arm64/include/asm/io.h
+++ b/arch/arm64/include/asm/io.h
@@ -222,7 +222,7 @@
 extern void __iounmap(volatile void __iomem *addr);
 
 #define PROT_DEFAULT		(PTE_TYPE_PAGE | PTE_AF | PTE_DIRTY)
-#define PROT_DEVICE_nGnRE	(PROT_DEFAULT | PTE_XN | PTE_ATTRINDX(MT_DEVICE_nGnRE))
+#define PROT_DEVICE_nGnRE	(PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_ATTRINDX(MT_DEVICE_nGnRE))
 #define PROT_NORMAL_NC		(PROT_DEFAULT | PTE_ATTRINDX(MT_NORMAL_NC))
 
 #define ioremap(addr, size)		__ioremap((addr), (size), __pgprot(PROT_DEVICE_nGnRE))
diff --git a/arch/arm64/include/asm/pgtable-hwdef.h b/arch/arm64/include/asm/pgtable-hwdef.h
index 0f3b458..75fd13d 100644
--- a/arch/arm64/include/asm/pgtable-hwdef.h
+++ b/arch/arm64/include/asm/pgtable-hwdef.h
@@ -38,7 +38,8 @@
 #define PMD_SECT_S		(_AT(pmdval_t, 3) << 8)
 #define PMD_SECT_AF		(_AT(pmdval_t, 1) << 10)
 #define PMD_SECT_NG		(_AT(pmdval_t, 1) << 11)
-#define PMD_SECT_XN		(_AT(pmdval_t, 1) << 54)
+#define PMD_SECT_PXN		(_AT(pmdval_t, 1) << 53)
+#define PMD_SECT_UXN		(_AT(pmdval_t, 1) << 54)
 
 /*
  * AttrIndx[2:0] encoding (mapping attributes defined in the MAIR* registers).
@@ -57,7 +58,8 @@
 #define PTE_SHARED		(_AT(pteval_t, 3) << 8)		/* SH[1:0], inner shareable */
 #define PTE_AF			(_AT(pteval_t, 1) << 10)	/* Access Flag */
 #define PTE_NG			(_AT(pteval_t, 1) << 11)	/* nG */
-#define PTE_XN			(_AT(pteval_t, 1) << 54)	/* XN */
+#define PTE_PXN			(_AT(pteval_t, 1) << 53)	/* Privileged XN */
+#define PTE_UXN			(_AT(pteval_t, 1) << 54)	/* User XN */
 
 /*
  * AttrIndx[2:0] encoding (mapping attributes defined in the MAIR* registers).
diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h
index 8960239..14aba2d 100644
--- a/arch/arm64/include/asm/pgtable.h
+++ b/arch/arm64/include/asm/pgtable.h
@@ -62,23 +62,23 @@
 
 #define _MOD_PROT(p, b)	__pgprot(pgprot_val(p) | (b))
 
-#define PAGE_NONE		_MOD_PROT(pgprot_default, PTE_NG | PTE_XN | PTE_RDONLY)
-#define PAGE_SHARED		_MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_XN)
-#define PAGE_SHARED_EXEC	_MOD_PROT(pgprot_default, PTE_USER | PTE_NG)
-#define PAGE_COPY		_MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_XN | PTE_RDONLY)
-#define PAGE_COPY_EXEC		_MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_RDONLY)
-#define PAGE_READONLY		_MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_XN | PTE_RDONLY)
-#define PAGE_READONLY_EXEC	_MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_RDONLY)
-#define PAGE_KERNEL		_MOD_PROT(pgprot_default, PTE_XN | PTE_DIRTY)
-#define PAGE_KERNEL_EXEC	_MOD_PROT(pgprot_default, PTE_DIRTY)
+#define PAGE_NONE		_MOD_PROT(pgprot_default, PTE_NG | PTE_PXN | PTE_UXN | PTE_RDONLY)
+#define PAGE_SHARED		_MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_PXN | PTE_UXN)
+#define PAGE_SHARED_EXEC	_MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_PXN)
+#define PAGE_COPY		_MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_PXN | PTE_UXN | PTE_RDONLY)
+#define PAGE_COPY_EXEC		_MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_PXN | PTE_RDONLY)
+#define PAGE_READONLY		_MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_PXN | PTE_UXN | PTE_RDONLY)
+#define PAGE_READONLY_EXEC	_MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_PXN | PTE_RDONLY)
+#define PAGE_KERNEL		_MOD_PROT(pgprot_default, PTE_PXN | PTE_UXN | PTE_DIRTY)
+#define PAGE_KERNEL_EXEC	_MOD_PROT(pgprot_default, PTE_UXN | PTE_DIRTY)
 
-#define __PAGE_NONE		__pgprot(_PAGE_DEFAULT | PTE_NG | PTE_XN | PTE_RDONLY)
-#define __PAGE_SHARED		__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_XN)
-#define __PAGE_SHARED_EXEC	__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG)
-#define __PAGE_COPY		__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_XN | PTE_RDONLY)
-#define __PAGE_COPY_EXEC	__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_RDONLY)
-#define __PAGE_READONLY		__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_XN | PTE_RDONLY)
-#define __PAGE_READONLY_EXEC	__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_RDONLY)
+#define __PAGE_NONE		__pgprot(_PAGE_DEFAULT | PTE_NG | PTE_PXN | PTE_UXN | PTE_RDONLY)
+#define __PAGE_SHARED		__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_UXN)
+#define __PAGE_SHARED_EXEC	__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN)
+#define __PAGE_COPY		__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_UXN | PTE_RDONLY)
+#define __PAGE_COPY_EXEC	__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_RDONLY)
+#define __PAGE_READONLY		__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_UXN | PTE_RDONLY)
+#define __PAGE_READONLY_EXEC	__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_RDONLY)
 
 #endif /* __ASSEMBLY__ */
 
@@ -130,10 +130,10 @@
 #define pte_young(pte)		(pte_val(pte) & PTE_AF)
 #define pte_special(pte)	(pte_val(pte) & PTE_SPECIAL)
 #define pte_write(pte)		(!(pte_val(pte) & PTE_RDONLY))
-#define pte_exec(pte)		(!(pte_val(pte) & PTE_XN))
+#define pte_exec(pte)		(!(pte_val(pte) & PTE_UXN))
 
 #define pte_present_exec_user(pte) \
-	((pte_val(pte) & (PTE_VALID | PTE_USER | PTE_XN)) == \
+	((pte_val(pte) & (PTE_VALID | PTE_USER | PTE_UXN)) == \
 	 (PTE_VALID | PTE_USER))
 
 #define PTE_BIT_FUNC(fn,op) \
@@ -262,7 +262,7 @@
 
 static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 {
-	const pteval_t mask = PTE_USER | PTE_XN | PTE_RDONLY;
+	const pteval_t mask = PTE_USER | PTE_PXN | PTE_UXN | PTE_RDONLY;
 	pte_val(pte) = (pte_val(pte) & ~mask) | (pgprot_val(newprot) & mask);
 	return pte;
 }
diff --git a/arch/arm64/include/asm/unistd32.h b/arch/arm64/include/asm/unistd32.h
index 6d909fa..656a6f2 100644
--- a/arch/arm64/include/asm/unistd32.h
+++ b/arch/arm64/include/asm/unistd32.h
@@ -392,7 +392,7 @@
 __SYSCALL(368, compat_sys_fanotify_mark_wrapper)
 __SYSCALL(369, sys_prlimit64)
 __SYSCALL(370, sys_name_to_handle_at)
-__SYSCALL(371, sys_open_by_handle_at)
+__SYSCALL(371, compat_sys_open_by_handle_at)
 __SYSCALL(372, sys_clock_adjtime)
 __SYSCALL(373, sys_syncfs)
 
diff --git a/arch/c6x/Makefile b/arch/c6x/Makefile
index a9eb959..e72eb34 100644
--- a/arch/c6x/Makefile
+++ b/arch/c6x/Makefile
@@ -41,7 +41,7 @@
 export DTB
 
 ifneq ($(DTB),)
-core-y	+= $(boot)/
+core-y	+= $(boot)/dts/
 endif
 
 # With make 3.82 we cannot mix normal and wildcard targets
diff --git a/arch/c6x/boot/Makefile b/arch/c6x/boot/Makefile
index 6891257..8734abe 100644
--- a/arch/c6x/boot/Makefile
+++ b/arch/c6x/boot/Makefile
@@ -6,25 +6,5 @@
 $(obj)/vmlinux.bin: vmlinux FORCE
 	$(call if_changed,objcopy)
 
-DTC_FLAGS ?= -p 1024
-
-ifneq ($(DTB),)
-obj-y += linked_dtb.o
-endif
-
-$(obj)/%.dtb: $(src)/dts/%.dts FORCE
-	$(call if_changed_dep,dtc)
-
-quiet_cmd_cp = CP      $< $@$2
-	cmd_cp = cat $< >$@$2 || (rm -f $@ && echo false)
-
-# Generate builtin.dtb from $(DTB).dtb
-$(obj)/builtin.dtb: $(obj)/$(DTB).dtb
-	$(call if_changed,cp)
-
-$(obj)/linked_dtb.o: $(obj)/builtin.dtb
-
 $(obj)/dtbImage.%: vmlinux
 	$(call if_changed,objcopy)
-
-clean-files := $(obj)/*.dtb
diff --git a/arch/c6x/boot/dts/Makefile b/arch/c6x/boot/dts/Makefile
new file mode 100644
index 0000000..c7528b0
--- /dev/null
+++ b/arch/c6x/boot/dts/Makefile
@@ -0,0 +1,20 @@
+#
+# Makefile for device trees
+#
+
+DTC_FLAGS ?= -p 1024
+
+ifneq ($(DTB),)
+obj-y += linked_dtb.o
+endif
+
+quiet_cmd_cp = CP      $< $@$2
+	cmd_cp = cat $< >$@$2 || (rm -f $@ && echo false)
+
+# Generate builtin.dtb from $(DTB).dtb
+$(obj)/builtin.dtb: $(obj)/$(DTB).dtb
+	$(call if_changed,cp)
+
+$(obj)/linked_dtb.o: $(obj)/builtin.dtb
+
+clean-files := *.dtb
diff --git a/arch/c6x/boot/dts/linked_dtb.S b/arch/c6x/boot/dts/linked_dtb.S
new file mode 100644
index 0000000..cf347f1
--- /dev/null
+++ b/arch/c6x/boot/dts/linked_dtb.S
@@ -0,0 +1,2 @@
+.section __fdt_blob,"a"
+.incbin "arch/c6x/boot/dts/builtin.dtb"
diff --git a/arch/c6x/boot/linked_dtb.S b/arch/c6x/boot/linked_dtb.S
deleted file mode 100644
index 57a4454..0000000
--- a/arch/c6x/boot/linked_dtb.S
+++ /dev/null
@@ -1,2 +0,0 @@
-.section __fdt_blob,"a"
-.incbin "arch/c6x/boot/builtin.dtb"
diff --git a/arch/c6x/include/asm/setup.h b/arch/c6x/include/asm/setup.h
new file mode 100644
index 0000000..ecead15
--- /dev/null
+++ b/arch/c6x/include/asm/setup.h
@@ -0,0 +1,33 @@
+/*
+ *  Port on Texas Instruments TMS320C6x architecture
+ *
+ *  Copyright (C) 2004, 2009, 2010 2011 Texas Instruments Incorporated
+ *  Author: Aurelien Jacquiot (aurelien.jacquiot@jaluna.com)
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+#ifndef _ASM_C6X_SETUP_H
+#define _ASM_C6X_SETUP_H
+
+#include <uapi/asm/setup.h>
+
+#ifndef __ASSEMBLY__
+extern char c6x_command_line[COMMAND_LINE_SIZE];
+
+extern int c6x_add_memory(phys_addr_t start, unsigned long size);
+
+extern unsigned long ram_start;
+extern unsigned long ram_end;
+
+extern int c6x_num_cores;
+extern unsigned int c6x_silicon_rev;
+extern unsigned int c6x_devstat;
+extern unsigned char c6x_fuse_mac[6];
+
+extern void machine_init(unsigned long dt_ptr);
+extern void time_init(void);
+
+#endif /* !__ASSEMBLY__ */
+#endif /* _ASM_C6X_SETUP_H */
diff --git a/arch/c6x/include/uapi/asm/Kbuild b/arch/c6x/include/uapi/asm/Kbuild
index c312b42..e9bc2b2 100644
--- a/arch/c6x/include/uapi/asm/Kbuild
+++ b/arch/c6x/include/uapi/asm/Kbuild
@@ -1,6 +1,8 @@
 # UAPI Header export list
 include include/uapi/asm-generic/Kbuild.asm
 
+generic-y += kvm_para.h
+
 header-y += byteorder.h
 header-y += kvm_para.h
 header-y += ptrace.h
diff --git a/arch/c6x/include/uapi/asm/kvm_para.h b/arch/c6x/include/uapi/asm/kvm_para.h
deleted file mode 100644
index 14fab8f..0000000
--- a/arch/c6x/include/uapi/asm/kvm_para.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/kvm_para.h>
diff --git a/arch/c6x/include/uapi/asm/setup.h b/arch/c6x/include/uapi/asm/setup.h
index a01e318..ad9ac97 100644
--- a/arch/c6x/include/uapi/asm/setup.h
+++ b/arch/c6x/include/uapi/asm/setup.h
@@ -1,33 +1,6 @@
-/*
- *  Port on Texas Instruments TMS320C6x architecture
- *
- *  Copyright (C) 2004, 2009, 2010 2011 Texas Instruments Incorporated
- *  Author: Aurelien Jacquiot (aurelien.jacquiot@jaluna.com)
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-#ifndef _ASM_C6X_SETUP_H
-#define _ASM_C6X_SETUP_H
+#ifndef _UAPI_ASM_C6X_SETUP_H
+#define _UAPI_ASM_C6X_SETUP_H
 
 #define COMMAND_LINE_SIZE   1024
 
-#ifndef __ASSEMBLY__
-extern char c6x_command_line[COMMAND_LINE_SIZE];
-
-extern int c6x_add_memory(phys_addr_t start, unsigned long size);
-
-extern unsigned long ram_start;
-extern unsigned long ram_end;
-
-extern int c6x_num_cores;
-extern unsigned int c6x_silicon_rev;
-extern unsigned int c6x_devstat;
-extern unsigned char c6x_fuse_mac[6];
-
-extern void machine_init(unsigned long dt_ptr);
-extern void time_init(void);
-
-#endif /* !__ASSEMBLY__ */
-#endif /* _ASM_C6X_SETUP_H */
+#endif /* _UAPI_ASM_C6X_SETUP_H */
diff --git a/arch/c6x/kernel/entry.S b/arch/c6x/kernel/entry.S
index 5449c36..0ed6157 100644
--- a/arch/c6x/kernel/entry.S
+++ b/arch/c6x/kernel/entry.S
@@ -277,6 +277,8 @@
  [A1]	BNOP	.S1	work_resched,5
 
 work_notifysig:
+	;; enable interrupts for do_notify_resume()
+	UNMASK_INT B2
 	B	.S2	do_notify_resume
 	LDW	.D2T1	*+SP(REGS__END+8),A6 ; syscall flag
 	ADDKPC	.S2	resume_userspace,B3,1
@@ -427,8 +429,7 @@
 ENDPROC(ret_from_kernel_execve)
 
 	;;
-	;; These are the interrupt handlers, responsible for calling __do_IRQ()
-	;; int6 is used for syscalls (see _system_call entry)
+	;; These are the interrupt handlers, responsible for calling c6x_do_IRQ()
 	;;
 	.macro SAVE_ALL_INT
 	SAVE_ALL IRP,ITSR
diff --git a/arch/ia64/include/asm/device.h b/arch/ia64/include/asm/device.h
index d05e78f..f69c32f 100644
--- a/arch/ia64/include/asm/device.h
+++ b/arch/ia64/include/asm/device.h
@@ -7,9 +7,6 @@
 #define _ASM_IA64_DEVICE_H
 
 struct dev_archdata {
-#ifdef CONFIG_ACPI
-	void	*acpi_handle;
-#endif
 #ifdef CONFIG_INTEL_IOMMU
 	void *iommu; /* hook for IOMMU specific extension */
 #endif
diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c
index 44057885..e9682f5 100644
--- a/arch/ia64/kernel/acpi.c
+++ b/arch/ia64/kernel/acpi.c
@@ -633,6 +633,7 @@
 				      ACPI_EDGE_SENSITIVE) ? IOSAPIC_EDGE :
 				     IOSAPIC_LEVEL);
 }
+EXPORT_SYMBOL_GPL(acpi_register_gsi);
 
 void acpi_unregister_gsi(u32 gsi)
 {
@@ -644,6 +645,7 @@
 
 	iosapic_unregister_intr(gsi);
 }
+EXPORT_SYMBOL_GPL(acpi_unregister_gsi);
 
 static int __init acpi_parse_fadt(struct acpi_table_header *table)
 {
diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c
index acd5b68..082e383 100644
--- a/arch/ia64/mm/init.c
+++ b/arch/ia64/mm/init.c
@@ -637,7 +637,6 @@
 
 	high_memory = __va(max_low_pfn * PAGE_SIZE);
 
-	reset_zone_present_pages();
 	for_each_online_pgdat(pgdat)
 		if (pgdat->bdata->node_bootmem_map)
 			totalram_pages += free_all_bootmem_node(pgdat);
diff --git a/arch/m68k/include/asm/signal.h b/arch/m68k/include/asm/signal.h
index 67e489d..2df26b5 100644
--- a/arch/m68k/include/asm/signal.h
+++ b/arch/m68k/include/asm/signal.h
@@ -41,7 +41,7 @@
 static inline void sigaddset(sigset_t *set, int _sig)
 {
 	asm ("bfset %0{%1,#1}"
-		: "+od" (*set)
+		: "+o" (*set)
 		: "id" ((_sig - 1) ^ 31)
 		: "cc");
 }
@@ -49,7 +49,7 @@
 static inline void sigdelset(sigset_t *set, int _sig)
 {
 	asm ("bfclr %0{%1,#1}"
-		: "+od" (*set)
+		: "+o" (*set)
 		: "id" ((_sig - 1) ^ 31)
 		: "cc");
 }
@@ -65,7 +65,7 @@
 	int ret;
 	asm ("bfextu %1{%2,#1},%0"
 		: "=d" (ret)
-		: "od" (*set), "id" ((_sig-1) ^ 31)
+		: "o" (*set), "id" ((_sig-1) ^ 31)
 		: "cc");
 	return ret;
 }
diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile
index b23c40e..d26fb90 100644
--- a/arch/microblaze/Makefile
+++ b/arch/microblaze/Makefile
@@ -57,7 +57,7 @@
 DTB:=$(subst simpleImage.,,$(filter simpleImage.%, $(MAKECMDGOALS)))
 
 ifneq ($(DTB),)
-	core-y	+= $(boot)/
+	core-y	+= $(boot)/dts/
 endif
 
 # defines filename extension depending memory management type
diff --git a/arch/microblaze/boot/Makefile b/arch/microblaze/boot/Makefile
index fa83ea4..80fe54f 100644
--- a/arch/microblaze/boot/Makefile
+++ b/arch/microblaze/boot/Makefile
@@ -2,21 +2,10 @@
 # arch/microblaze/boot/Makefile
 #
 
-obj-y += linked_dtb.o
-
 targets := linux.bin linux.bin.gz simpleImage.%
 
 OBJCOPYFLAGS := -R .note -R .comment -R .note.gnu.build-id -O binary
 
-# Ensure system.dtb exists
-$(obj)/linked_dtb.o: $(obj)/system.dtb
-
-# Generate system.dtb from $(DTB).dtb
-ifneq ($(DTB),system)
-$(obj)/system.dtb: $(obj)/$(DTB).dtb
-	$(call if_changed,cp)
-endif
-
 $(obj)/linux.bin: vmlinux FORCE
 	$(call if_changed,objcopy)
 	$(call if_changed,uimage)
@@ -45,10 +34,4 @@
 	@echo 'Kernel: $@ is ready' ' (#'`cat .version`')'
 
 
-# Rule to build device tree blobs
-DTC_FLAGS := -p 1024
-
-$(obj)/%.dtb: $(src)/dts/%.dts FORCE
-	$(call if_changed_dep,dtc)
-
-clean-files += *.dtb simpleImage.*.unstrip linux.bin.ub
+clean-files += simpleImage.*.unstrip linux.bin.ub
diff --git a/arch/microblaze/boot/dts/Makefile b/arch/microblaze/boot/dts/Makefile
new file mode 100644
index 0000000..c3b3a5d
--- /dev/null
+++ b/arch/microblaze/boot/dts/Makefile
@@ -0,0 +1,22 @@
+#
+# arch/microblaze/boot/Makefile
+#
+
+obj-y += linked_dtb.o
+
+# Ensure system.dtb exists
+$(obj)/linked_dtb.o: $(obj)/system.dtb
+
+# Generate system.dtb from $(DTB).dtb
+ifneq ($(DTB),system)
+$(obj)/system.dtb: $(obj)/$(DTB).dtb
+	$(call if_changed,cp)
+endif
+
+quiet_cmd_cp = CP      $< $@$2
+	cmd_cp = cat $< >$@$2 || (rm -f $@ && echo false)
+
+# Rule to build device tree blobs
+DTC_FLAGS := -p 1024
+
+clean-files += *.dtb
diff --git a/arch/microblaze/boot/dts/linked_dtb.S b/arch/microblaze/boot/dts/linked_dtb.S
new file mode 100644
index 0000000..23345af
--- /dev/null
+++ b/arch/microblaze/boot/dts/linked_dtb.S
@@ -0,0 +1,2 @@
+.section __fdt_blob,"a"
+.incbin "arch/microblaze/boot/dts/system.dtb"
diff --git a/arch/microblaze/boot/linked_dtb.S b/arch/microblaze/boot/linked_dtb.S
deleted file mode 100644
index cb2b537..0000000
--- a/arch/microblaze/boot/linked_dtb.S
+++ /dev/null
@@ -1,3 +0,0 @@
-.section __fdt_blob,"a"
-.incbin "arch/microblaze/boot/system.dtb"
-
diff --git a/arch/microblaze/kernel/signal.c b/arch/microblaze/kernel/signal.c
index 3847e5b..3903e3d 100644
--- a/arch/microblaze/kernel/signal.c
+++ b/arch/microblaze/kernel/signal.c
@@ -111,7 +111,7 @@
 
 	/* It is more difficult to avoid calling this function than to
 	 call it and ignore errors. */
-	if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->r1))
+	if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->r1) == -EFAULT)
 		goto badframe;
 
 	return rval;
diff --git a/arch/mips/cavium-octeon/Makefile b/arch/mips/cavium-octeon/Makefile
index bc96e29..6e927cf 100644
--- a/arch/mips/cavium-octeon/Makefile
+++ b/arch/mips/cavium-octeon/Makefile
@@ -24,9 +24,6 @@
 
 obj-y += $(patsubst %.dts, %.dtb.o, $(DTS_FILES))
 
-$(obj)/%.dtb: $(src)/%.dts FORCE
-	$(call if_changed_dep,dtc)
-
 # Let's keep the .dtb files around in case we want to look at them.
 .SECONDARY:  $(addprefix $(obj)/, $(DTB_FILES))
 
diff --git a/arch/mips/cavium-octeon/executive/cvmx-l2c.c b/arch/mips/cavium-octeon/executive/cvmx-l2c.c
index d38246e..9f883bf 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-l2c.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-l2c.c
@@ -30,6 +30,7 @@
  * measurement, and debugging facilities.
  */
 
+#include <linux/irqflags.h>
 #include <asm/octeon/cvmx.h>
 #include <asm/octeon/cvmx-l2c.h>
 #include <asm/octeon/cvmx-spinlock.h>
diff --git a/arch/mips/fw/arc/misc.c b/arch/mips/fw/arc/misc.c
index 7cf80ca..f9f5307 100644
--- a/arch/mips/fw/arc/misc.c
+++ b/arch/mips/fw/arc/misc.c
@@ -11,6 +11,7 @@
  */
 #include <linux/init.h>
 #include <linux/kernel.h>
+#include <linux/irqflags.h>
 
 #include <asm/bcache.h>
 
diff --git a/arch/mips/include/asm/bitops.h b/arch/mips/include/asm/bitops.h
index 82ad35c..46ac73a 100644
--- a/arch/mips/include/asm/bitops.h
+++ b/arch/mips/include/asm/bitops.h
@@ -14,7 +14,6 @@
 #endif
 
 #include <linux/compiler.h>
-#include <linux/irqflags.h>
 #include <linux/types.h>
 #include <asm/barrier.h>
 #include <asm/byteorder.h>		/* sigh ... */
@@ -44,6 +43,24 @@
 #define smp_mb__before_clear_bit()	smp_mb__before_llsc()
 #define smp_mb__after_clear_bit()	smp_llsc_mb()
 
+
+/*
+ * These are the "slower" versions of the functions and are in bitops.c.
+ * These functions call raw_local_irq_{save,restore}().
+ */
+void __mips_set_bit(unsigned long nr, volatile unsigned long *addr);
+void __mips_clear_bit(unsigned long nr, volatile unsigned long *addr);
+void __mips_change_bit(unsigned long nr, volatile unsigned long *addr);
+int __mips_test_and_set_bit(unsigned long nr,
+			    volatile unsigned long *addr);
+int __mips_test_and_set_bit_lock(unsigned long nr,
+				 volatile unsigned long *addr);
+int __mips_test_and_clear_bit(unsigned long nr,
+			      volatile unsigned long *addr);
+int __mips_test_and_change_bit(unsigned long nr,
+			       volatile unsigned long *addr);
+
+
 /*
  * set_bit - Atomically set a bit in memory
  * @nr: the bit to set
@@ -57,7 +74,7 @@
 static inline void set_bit(unsigned long nr, volatile unsigned long *addr)
 {
 	unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
-	unsigned short bit = nr & SZLONG_MASK;
+	int bit = nr & SZLONG_MASK;
 	unsigned long temp;
 
 	if (kernel_uses_llsc && R10000_LLSC_WAR) {
@@ -92,17 +109,8 @@
 			: "=&r" (temp), "+m" (*m)
 			: "ir" (1UL << bit));
 		} while (unlikely(!temp));
-	} else {
-		volatile unsigned long *a = addr;
-		unsigned long mask;
-		unsigned long flags;
-
-		a += nr >> SZLONG_LOG;
-		mask = 1UL << bit;
-		raw_local_irq_save(flags);
-		*a |= mask;
-		raw_local_irq_restore(flags);
-	}
+	} else
+		__mips_set_bit(nr, addr);
 }
 
 /*
@@ -118,7 +126,7 @@
 static inline void clear_bit(unsigned long nr, volatile unsigned long *addr)
 {
 	unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
-	unsigned short bit = nr & SZLONG_MASK;
+	int bit = nr & SZLONG_MASK;
 	unsigned long temp;
 
 	if (kernel_uses_llsc && R10000_LLSC_WAR) {
@@ -153,17 +161,8 @@
 			: "=&r" (temp), "+m" (*m)
 			: "ir" (~(1UL << bit)));
 		} while (unlikely(!temp));
-	} else {
-		volatile unsigned long *a = addr;
-		unsigned long mask;
-		unsigned long flags;
-
-		a += nr >> SZLONG_LOG;
-		mask = 1UL << bit;
-		raw_local_irq_save(flags);
-		*a &= ~mask;
-		raw_local_irq_restore(flags);
-	}
+	} else
+		__mips_clear_bit(nr, addr);
 }
 
 /*
@@ -191,7 +190,7 @@
  */
 static inline void change_bit(unsigned long nr, volatile unsigned long *addr)
 {
-	unsigned short bit = nr & SZLONG_MASK;
+	int bit = nr & SZLONG_MASK;
 
 	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
@@ -220,17 +219,8 @@
 			: "=&r" (temp), "+m" (*m)
 			: "ir" (1UL << bit));
 		} while (unlikely(!temp));
-	} else {
-		volatile unsigned long *a = addr;
-		unsigned long mask;
-		unsigned long flags;
-
-		a += nr >> SZLONG_LOG;
-		mask = 1UL << bit;
-		raw_local_irq_save(flags);
-		*a ^= mask;
-		raw_local_irq_restore(flags);
-	}
+	} else
+		__mips_change_bit(nr, addr);
 }
 
 /*
@@ -244,7 +234,7 @@
 static inline int test_and_set_bit(unsigned long nr,
 	volatile unsigned long *addr)
 {
-	unsigned short bit = nr & SZLONG_MASK;
+	int bit = nr & SZLONG_MASK;
 	unsigned long res;
 
 	smp_mb__before_llsc();
@@ -281,18 +271,8 @@
 		} while (unlikely(!res));
 
 		res = temp & (1UL << bit);
-	} else {
-		volatile unsigned long *a = addr;
-		unsigned long mask;
-		unsigned long flags;
-
-		a += nr >> SZLONG_LOG;
-		mask = 1UL << bit;
-		raw_local_irq_save(flags);
-		res = (mask & *a);
-		*a |= mask;
-		raw_local_irq_restore(flags);
-	}
+	} else
+		res = __mips_test_and_set_bit(nr, addr);
 
 	smp_llsc_mb();
 
@@ -310,7 +290,7 @@
 static inline int test_and_set_bit_lock(unsigned long nr,
 	volatile unsigned long *addr)
 {
-	unsigned short bit = nr & SZLONG_MASK;
+	int bit = nr & SZLONG_MASK;
 	unsigned long res;
 
 	if (kernel_uses_llsc && R10000_LLSC_WAR) {
@@ -345,18 +325,8 @@
 		} while (unlikely(!res));
 
 		res = temp & (1UL << bit);
-	} else {
-		volatile unsigned long *a = addr;
-		unsigned long mask;
-		unsigned long flags;
-
-		a += nr >> SZLONG_LOG;
-		mask = 1UL << bit;
-		raw_local_irq_save(flags);
-		res = (mask & *a);
-		*a |= mask;
-		raw_local_irq_restore(flags);
-	}
+	} else
+		res = __mips_test_and_set_bit_lock(nr, addr);
 
 	smp_llsc_mb();
 
@@ -373,7 +343,7 @@
 static inline int test_and_clear_bit(unsigned long nr,
 	volatile unsigned long *addr)
 {
-	unsigned short bit = nr & SZLONG_MASK;
+	int bit = nr & SZLONG_MASK;
 	unsigned long res;
 
 	smp_mb__before_llsc();
@@ -428,18 +398,8 @@
 		} while (unlikely(!res));
 
 		res = temp & (1UL << bit);
-	} else {
-		volatile unsigned long *a = addr;
-		unsigned long mask;
-		unsigned long flags;
-
-		a += nr >> SZLONG_LOG;
-		mask = 1UL << bit;
-		raw_local_irq_save(flags);
-		res = (mask & *a);
-		*a &= ~mask;
-		raw_local_irq_restore(flags);
-	}
+	} else
+		res = __mips_test_and_clear_bit(nr, addr);
 
 	smp_llsc_mb();
 
@@ -457,7 +417,7 @@
 static inline int test_and_change_bit(unsigned long nr,
 	volatile unsigned long *addr)
 {
-	unsigned short bit = nr & SZLONG_MASK;
+	int bit = nr & SZLONG_MASK;
 	unsigned long res;
 
 	smp_mb__before_llsc();
@@ -494,18 +454,8 @@
 		} while (unlikely(!res));
 
 		res = temp & (1UL << bit);
-	} else {
-		volatile unsigned long *a = addr;
-		unsigned long mask;
-		unsigned long flags;
-
-		a += nr >> SZLONG_LOG;
-		mask = 1UL << bit;
-		raw_local_irq_save(flags);
-		res = (mask & *a);
-		*a ^= mask;
-		raw_local_irq_restore(flags);
-	}
+	} else
+		res = __mips_test_and_change_bit(nr, addr);
 
 	smp_llsc_mb();
 
diff --git a/arch/mips/include/asm/compat.h b/arch/mips/include/asm/compat.h
index 58277e0..3c5d146 100644
--- a/arch/mips/include/asm/compat.h
+++ b/arch/mips/include/asm/compat.h
@@ -290,7 +290,7 @@
 
 static inline int is_compat_task(void)
 {
-	return test_thread_flag(TIF_32BIT);
+	return test_thread_flag(TIF_32BIT_ADDR);
 }
 
 #endif /* _ASM_COMPAT_H */
diff --git a/arch/mips/include/asm/hugetlb.h b/arch/mips/include/asm/hugetlb.h
index bd94946..ef99db9 100644
--- a/arch/mips/include/asm/hugetlb.h
+++ b/arch/mips/include/asm/hugetlb.h
@@ -95,7 +95,17 @@
 					     pte_t *ptep, pte_t pte,
 					     int dirty)
 {
-	return ptep_set_access_flags(vma, addr, ptep, pte, dirty);
+	int changed = !pte_same(*ptep, pte);
+
+	if (changed) {
+		set_pte_at(vma->vm_mm, addr, ptep, pte);
+		/*
+		 * There could be some standard sized pages in there,
+		 * get them all.
+		 */
+		flush_tlb_range(vma, addr, addr + HPAGE_SIZE);
+	}
+	return changed;
 }
 
 static inline pte_t huge_ptep_get(pte_t *ptep)
diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h
index 29d9c23..ff2e034 100644
--- a/arch/mips/include/asm/io.h
+++ b/arch/mips/include/asm/io.h
@@ -15,6 +15,7 @@
 #include <linux/compiler.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
+#include <linux/irqflags.h>
 
 #include <asm/addrspace.h>
 #include <asm/bug.h>
diff --git a/arch/mips/include/asm/irqflags.h b/arch/mips/include/asm/irqflags.h
index 309cbcd..9f3384c 100644
--- a/arch/mips/include/asm/irqflags.h
+++ b/arch/mips/include/asm/irqflags.h
@@ -16,6 +16,105 @@
 #include <linux/compiler.h>
 #include <asm/hazards.h>
 
+#if defined(CONFIG_CPU_MIPSR2) && !defined(CONFIG_MIPS_MT_SMTC)
+
+__asm__(
+	"	.macro	arch_local_irq_disable\n"
+	"	.set	push						\n"
+	"	.set	noat						\n"
+	"	di							\n"
+	"	irq_disable_hazard					\n"
+	"	.set	pop						\n"
+	"	.endm							\n");
+
+static inline void arch_local_irq_disable(void)
+{
+	__asm__ __volatile__(
+		"arch_local_irq_disable"
+		: /* no outputs */
+		: /* no inputs */
+		: "memory");
+}
+
+
+__asm__(
+	"	.macro	arch_local_irq_save result			\n"
+	"	.set	push						\n"
+	"	.set	reorder						\n"
+	"	.set	noat						\n"
+	"	di	\\result					\n"
+	"	andi	\\result, 1					\n"
+	"	irq_disable_hazard					\n"
+	"	.set	pop						\n"
+	"	.endm							\n");
+
+static inline unsigned long arch_local_irq_save(void)
+{
+	unsigned long flags;
+	asm volatile("arch_local_irq_save\t%0"
+		     : "=r" (flags)
+		     : /* no inputs */
+		     : "memory");
+	return flags;
+}
+
+
+__asm__(
+	"	.macro	arch_local_irq_restore flags			\n"
+	"	.set	push						\n"
+	"	.set	noreorder					\n"
+	"	.set	noat						\n"
+#if defined(CONFIG_IRQ_CPU)
+	/*
+	 * Slow, but doesn't suffer from a relatively unlikely race
+	 * condition we're having since days 1.
+	 */
+	"	beqz	\\flags, 1f					\n"
+	"	di							\n"
+	"	ei							\n"
+	"1:								\n"
+#else
+	/*
+	 * Fast, dangerous.  Life is fun, life is good.
+	 */
+	"	mfc0	$1, $12						\n"
+	"	ins	$1, \\flags, 0, 1				\n"
+	"	mtc0	$1, $12						\n"
+#endif
+	"	irq_disable_hazard					\n"
+	"	.set	pop						\n"
+	"	.endm							\n");
+
+static inline void arch_local_irq_restore(unsigned long flags)
+{
+	unsigned long __tmp1;
+
+	__asm__ __volatile__(
+		"arch_local_irq_restore\t%0"
+		: "=r" (__tmp1)
+		: "0" (flags)
+		: "memory");
+}
+
+static inline void __arch_local_irq_restore(unsigned long flags)
+{
+	unsigned long __tmp1;
+
+	__asm__ __volatile__(
+		"arch_local_irq_restore\t%0"
+		: "=r" (__tmp1)
+		: "0" (flags)
+		: "memory");
+}
+#else
+/* Functions that require preempt_{dis,en}able() are in mips-atomic.c */
+void arch_local_irq_disable(void);
+unsigned long arch_local_irq_save(void);
+void arch_local_irq_restore(unsigned long flags);
+void __arch_local_irq_restore(unsigned long flags);
+#endif /* if defined(CONFIG_CPU_MIPSR2) && !defined(CONFIG_MIPS_MT_SMTC) */
+
+
 __asm__(
 	"	.macro	arch_local_irq_enable				\n"
 	"	.set	push						\n"
@@ -57,55 +156,6 @@
 }
 
 
-/*
- * For cli() we have to insert nops to make sure that the new value
- * has actually arrived in the status register before the end of this
- * macro.
- * R4000/R4400 need three nops, the R4600 two nops and the R10000 needs
- * no nops at all.
- */
-/*
- * For TX49, operating only IE bit is not enough.
- *
- * If mfc0 $12 follows store and the mfc0 is last instruction of a
- * page and fetching the next instruction causes TLB miss, the result
- * of the mfc0 might wrongly contain EXL bit.
- *
- * ERT-TX49H2-027, ERT-TX49H3-012, ERT-TX49HL3-006, ERT-TX49H4-008
- *
- * Workaround: mask EXL bit of the result or place a nop before mfc0.
- */
-__asm__(
-	"	.macro	arch_local_irq_disable\n"
-	"	.set	push						\n"
-	"	.set	noat						\n"
-#ifdef CONFIG_MIPS_MT_SMTC
-	"	mfc0	$1, $2, 1					\n"
-	"	ori	$1, 0x400					\n"
-	"	.set	noreorder					\n"
-	"	mtc0	$1, $2, 1					\n"
-#elif defined(CONFIG_CPU_MIPSR2)
-	"	di							\n"
-#else
-	"	mfc0	$1,$12						\n"
-	"	ori	$1,0x1f						\n"
-	"	xori	$1,0x1f						\n"
-	"	.set	noreorder					\n"
-	"	mtc0	$1,$12						\n"
-#endif
-	"	irq_disable_hazard					\n"
-	"	.set	pop						\n"
-	"	.endm							\n");
-
-static inline void arch_local_irq_disable(void)
-{
-	__asm__ __volatile__(
-		"arch_local_irq_disable"
-		: /* no outputs */
-		: /* no inputs */
-		: "memory");
-}
-
 __asm__(
 	"	.macro	arch_local_save_flags flags			\n"
 	"	.set	push						\n"
@@ -125,113 +175,6 @@
 	return flags;
 }
 
-__asm__(
-	"	.macro	arch_local_irq_save result			\n"
-	"	.set	push						\n"
-	"	.set	reorder						\n"
-	"	.set	noat						\n"
-#ifdef CONFIG_MIPS_MT_SMTC
-	"	mfc0	\\result, $2, 1					\n"
-	"	ori	$1, \\result, 0x400				\n"
-	"	.set	noreorder					\n"
-	"	mtc0	$1, $2, 1					\n"
-	"	andi	\\result, \\result, 0x400			\n"
-#elif defined(CONFIG_CPU_MIPSR2)
-	"	di	\\result					\n"
-	"	andi	\\result, 1					\n"
-#else
-	"	mfc0	\\result, $12					\n"
-	"	ori	$1, \\result, 0x1f				\n"
-	"	xori	$1, 0x1f					\n"
-	"	.set	noreorder					\n"
-	"	mtc0	$1, $12						\n"
-#endif
-	"	irq_disable_hazard					\n"
-	"	.set	pop						\n"
-	"	.endm							\n");
-
-static inline unsigned long arch_local_irq_save(void)
-{
-	unsigned long flags;
-	asm volatile("arch_local_irq_save\t%0"
-		     : "=r" (flags)
-		     : /* no inputs */
-		     : "memory");
-	return flags;
-}
-
-__asm__(
-	"	.macro	arch_local_irq_restore flags			\n"
-	"	.set	push						\n"
-	"	.set	noreorder					\n"
-	"	.set	noat						\n"
-#ifdef CONFIG_MIPS_MT_SMTC
-	"mfc0	$1, $2, 1						\n"
-	"andi	\\flags, 0x400						\n"
-	"ori	$1, 0x400						\n"
-	"xori	$1, 0x400						\n"
-	"or	\\flags, $1						\n"
-	"mtc0	\\flags, $2, 1						\n"
-#elif defined(CONFIG_CPU_MIPSR2) && defined(CONFIG_IRQ_CPU)
-	/*
-	 * Slow, but doesn't suffer from a relatively unlikely race
-	 * condition we're having since days 1.
-	 */
-	"	beqz	\\flags, 1f					\n"
-	"	 di							\n"
-	"	ei							\n"
-	"1:								\n"
-#elif defined(CONFIG_CPU_MIPSR2)
-	/*
-	 * Fast, dangerous.  Life is fun, life is good.
-	 */
-	"	mfc0	$1, $12						\n"
-	"	ins	$1, \\flags, 0, 1				\n"
-	"	mtc0	$1, $12						\n"
-#else
-	"	mfc0	$1, $12						\n"
-	"	andi	\\flags, 1					\n"
-	"	ori	$1, 0x1f					\n"
-	"	xori	$1, 0x1f					\n"
-	"	or	\\flags, $1					\n"
-	"	mtc0	\\flags, $12					\n"
-#endif
-	"	irq_disable_hazard					\n"
-	"	.set	pop						\n"
-	"	.endm							\n");
-
-
-static inline void arch_local_irq_restore(unsigned long flags)
-{
-	unsigned long __tmp1;
-
-#ifdef CONFIG_MIPS_MT_SMTC
-	/*
-	 * SMTC kernel needs to do a software replay of queued
-	 * IPIs, at the cost of branch and call overhead on each
-	 * local_irq_restore()
-	 */
-	if (unlikely(!(flags & 0x0400)))
-		smtc_ipi_replay();
-#endif
-
-	__asm__ __volatile__(
-		"arch_local_irq_restore\t%0"
-		: "=r" (__tmp1)
-		: "0" (flags)
-		: "memory");
-}
-
-static inline void __arch_local_irq_restore(unsigned long flags)
-{
-	unsigned long __tmp1;
-
-	__asm__ __volatile__(
-		"arch_local_irq_restore\t%0"
-		: "=r" (__tmp1)
-		: "0" (flags)
-		: "memory");
-}
 
 static inline int arch_irqs_disabled_flags(unsigned long flags)
 {
@@ -245,7 +188,7 @@
 #endif
 }
 
-#endif
+#endif /* #ifndef __ASSEMBLY__ */
 
 /*
  * Do the CPU's IRQ-state tracing from assembly code.
diff --git a/arch/mips/include/asm/thread_info.h b/arch/mips/include/asm/thread_info.h
index 8debe9e..18806a5 100644
--- a/arch/mips/include/asm/thread_info.h
+++ b/arch/mips/include/asm/thread_info.h
@@ -112,12 +112,6 @@
 #define TIF_LOAD_WATCH		25	/* If set, load watch registers */
 #define TIF_SYSCALL_TRACE	31	/* syscall trace active */
 
-#ifdef CONFIG_MIPS32_O32
-#define TIF_32BIT TIF_32BIT_REGS
-#elif defined(CONFIG_MIPS32_N32)
-#define TIF_32BIT _TIF_32BIT_ADDR
-#endif /* CONFIG_MIPS32_O32 */
-
 #define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
 #define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index b1fb7af..cce3782 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -510,7 +510,6 @@
 				c->cputype = CPU_R3000A;
 				__cpu_name[cpu] = "R3000A";
 			}
-			break;
 		} else {
 			c->cputype = CPU_R3000;
 			__cpu_name[cpu] = "R3000";
diff --git a/arch/mips/kernel/entry.S b/arch/mips/kernel/entry.S
index a6c1332..9b00362 100644
--- a/arch/mips/kernel/entry.S
+++ b/arch/mips/kernel/entry.S
@@ -36,6 +36,11 @@
 FEXPORT(ret_from_irq)
 	LONG_S	s0, TI_REGS($28)
 FEXPORT(__ret_from_irq)
+/*
+ * We can be coming here from a syscall done in the kernel space,
+ * e.g. a failed kernel_execve().
+ */
+resume_userspace_check:
 	LONG_L	t0, PT_STATUS(sp)		# returning to kernel mode?
 	andi	t0, t0, KU_USER
 	beqz	t0, resume_kernel
@@ -162,7 +167,7 @@
 	move	a0, sp
 	li	a1, 0
 	jal	do_notify_resume	# a2 already loaded
-	j	resume_userspace
+	j	resume_userspace_check
 
 FEXPORT(syscall_exit_partial)
 	local_irq_disable		# make sure need_resched doesn't
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index f6ba838..86ec03f 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -397,14 +397,14 @@
 	PTR	sys_timerfd_create
 	PTR	compat_sys_timerfd_gettime	/* 6285 */
 	PTR	compat_sys_timerfd_settime
-	PTR	sys_signalfd4
+	PTR	compat_sys_signalfd4
 	PTR	sys_eventfd2
 	PTR	sys_epoll_create1
 	PTR	sys_dup3			/* 6290 */
 	PTR	sys_pipe2
 	PTR	sys_inotify_init1
-	PTR	sys_preadv
-	PTR	sys_pwritev
+	PTR	compat_sys_preadv
+	PTR	compat_sys_pwritev
 	PTR	compat_sys_rt_tgsigqueueinfo	/* 6295 */
 	PTR	sys_perf_event_open
 	PTR	sys_accept4
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index a53f8ec..290dc6a 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -79,7 +79,7 @@
 void __init add_memory_region(phys_t start, phys_t size, long type)
 {
 	int x = boot_mem_map.nr_map;
-	struct boot_mem_map_entry *prev = boot_mem_map.map + x - 1;
+	int i;
 
 	/* Sanity check */
 	if (start + size < start) {
@@ -88,15 +88,29 @@
 	}
 
 	/*
-	 * Try to merge with previous entry if any.  This is far less than
-	 * perfect but is sufficient for most real world cases.
+	 * Try to merge with existing entry, if any.
 	 */
-	if (x && prev->addr + prev->size == start && prev->type == type) {
-		prev->size += size;
+	for (i = 0; i < boot_mem_map.nr_map; i++) {
+		struct boot_mem_map_entry *entry = boot_mem_map.map + i;
+		unsigned long top;
+
+		if (entry->type != type)
+			continue;
+
+		if (start + size < entry->addr)
+			continue;			/* no overlap */
+
+		if (entry->addr + entry->size < start)
+			continue;			/* no overlap */
+
+		top = max(entry->addr + entry->size, start + size);
+		entry->addr = min(entry->addr, start);
+		entry->size = top - entry->addr;
+
 		return;
 	}
 
-	if (x == BOOT_MEM_MAP_MAX) {
+	if (boot_mem_map.nr_map == BOOT_MEM_MAP_MAX) {
 		pr_err("Ooops! Too many entries in the memory map!\n");
 		return;
 	}
diff --git a/arch/mips/lantiq/dts/Makefile b/arch/mips/lantiq/dts/Makefile
index 674fca4..6fa72dd 100644
--- a/arch/mips/lantiq/dts/Makefile
+++ b/arch/mips/lantiq/dts/Makefile
@@ -1,4 +1 @@
 obj-$(CONFIG_DT_EASY50712) := easy50712.dtb.o
-
-$(obj)/%.dtb: $(obj)/%.dts
-	$(call if_changed,dtc)
diff --git a/arch/mips/lib/Makefile b/arch/mips/lib/Makefile
index c4a82e8..eeddc58 100644
--- a/arch/mips/lib/Makefile
+++ b/arch/mips/lib/Makefile
@@ -2,8 +2,9 @@
 # Makefile for MIPS-specific library files..
 #
 
-lib-y	+= csum_partial.o delay.o memcpy.o memset.o \
-	   strlen_user.o strncpy_user.o strnlen_user.o uncached.o
+lib-y	+= bitops.o csum_partial.o delay.o memcpy.o memset.o \
+	   mips-atomic.o strlen_user.o strncpy_user.o \
+	   strnlen_user.o uncached.o
 
 obj-y			+= iomap.o
 obj-$(CONFIG_PCI)	+= iomap-pci.o
diff --git a/arch/mips/lib/bitops.c b/arch/mips/lib/bitops.c
new file mode 100644
index 0000000..239a9c9
--- /dev/null
+++ b/arch/mips/lib/bitops.c
@@ -0,0 +1,179 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 1994-1997, 99, 2000, 06, 07 Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (c) 1999, 2000  Silicon Graphics, Inc.
+ */
+#include <linux/bitops.h>
+#include <linux/irqflags.h>
+#include <linux/export.h>
+
+
+/**
+ * __mips_set_bit - Atomically set a bit in memory.  This is called by
+ * set_bit() if it cannot find a faster solution.
+ * @nr: the bit to set
+ * @addr: the address to start counting from
+ */
+void __mips_set_bit(unsigned long nr, volatile unsigned long *addr)
+{
+	volatile unsigned long *a = addr;
+	unsigned bit = nr & SZLONG_MASK;
+	unsigned long mask;
+	unsigned long flags;
+
+	a += nr >> SZLONG_LOG;
+	mask = 1UL << bit;
+	raw_local_irq_save(flags);
+	*a |= mask;
+	raw_local_irq_restore(flags);
+}
+EXPORT_SYMBOL(__mips_set_bit);
+
+
+/**
+ * __mips_clear_bit - Clears a bit in memory.  This is called by clear_bit() if
+ * it cannot find a faster solution.
+ * @nr: Bit to clear
+ * @addr: Address to start counting from
+ */
+void __mips_clear_bit(unsigned long nr, volatile unsigned long *addr)
+{
+	volatile unsigned long *a = addr;
+	unsigned bit = nr & SZLONG_MASK;
+	unsigned long mask;
+	unsigned long flags;
+
+	a += nr >> SZLONG_LOG;
+	mask = 1UL << bit;
+	raw_local_irq_save(flags);
+	*a &= ~mask;
+	raw_local_irq_restore(flags);
+}
+EXPORT_SYMBOL(__mips_clear_bit);
+
+
+/**
+ * __mips_change_bit - Toggle a bit in memory.  This is called by change_bit()
+ * if it cannot find a faster solution.
+ * @nr: Bit to change
+ * @addr: Address to start counting from
+ */
+void __mips_change_bit(unsigned long nr, volatile unsigned long *addr)
+{
+	volatile unsigned long *a = addr;
+	unsigned bit = nr & SZLONG_MASK;
+	unsigned long mask;
+	unsigned long flags;
+
+	a += nr >> SZLONG_LOG;
+	mask = 1UL << bit;
+	raw_local_irq_save(flags);
+	*a ^= mask;
+	raw_local_irq_restore(flags);
+}
+EXPORT_SYMBOL(__mips_change_bit);
+
+
+/**
+ * __mips_test_and_set_bit - Set a bit and return its old value.  This is
+ * called by test_and_set_bit() if it cannot find a faster solution.
+ * @nr: Bit to set
+ * @addr: Address to count from
+ */
+int __mips_test_and_set_bit(unsigned long nr,
+			    volatile unsigned long *addr)
+{
+	volatile unsigned long *a = addr;
+	unsigned bit = nr & SZLONG_MASK;
+	unsigned long mask;
+	unsigned long flags;
+	unsigned long res;
+
+	a += nr >> SZLONG_LOG;
+	mask = 1UL << bit;
+	raw_local_irq_save(flags);
+	res = (mask & *a);
+	*a |= mask;
+	raw_local_irq_restore(flags);
+	return res;
+}
+EXPORT_SYMBOL(__mips_test_and_set_bit);
+
+
+/**
+ * __mips_test_and_set_bit_lock - Set a bit and return its old value.  This is
+ * called by test_and_set_bit_lock() if it cannot find a faster solution.
+ * @nr: Bit to set
+ * @addr: Address to count from
+ */
+int __mips_test_and_set_bit_lock(unsigned long nr,
+				 volatile unsigned long *addr)
+{
+	volatile unsigned long *a = addr;
+	unsigned bit = nr & SZLONG_MASK;
+	unsigned long mask;
+	unsigned long flags;
+	unsigned long res;
+
+	a += nr >> SZLONG_LOG;
+	mask = 1UL << bit;
+	raw_local_irq_save(flags);
+	res = (mask & *a);
+	*a |= mask;
+	raw_local_irq_restore(flags);
+	return res;
+}
+EXPORT_SYMBOL(__mips_test_and_set_bit_lock);
+
+
+/**
+ * __mips_test_and_clear_bit - Clear a bit and return its old value.  This is
+ * called by test_and_clear_bit() if it cannot find a faster solution.
+ * @nr: Bit to clear
+ * @addr: Address to count from
+ */
+int __mips_test_and_clear_bit(unsigned long nr, volatile unsigned long *addr)
+{
+	volatile unsigned long *a = addr;
+	unsigned bit = nr & SZLONG_MASK;
+	unsigned long mask;
+	unsigned long flags;
+	unsigned long res;
+
+	a += nr >> SZLONG_LOG;
+	mask = 1UL << bit;
+	raw_local_irq_save(flags);
+	res = (mask & *a);
+	*a &= ~mask;
+	raw_local_irq_restore(flags);
+	return res;
+}
+EXPORT_SYMBOL(__mips_test_and_clear_bit);
+
+
+/**
+ * __mips_test_and_change_bit - Change a bit and return its old value.  This is
+ * called by test_and_change_bit() if it cannot find a faster solution.
+ * @nr: Bit to change
+ * @addr: Address to count from
+ */
+int __mips_test_and_change_bit(unsigned long nr, volatile unsigned long *addr)
+{
+	volatile unsigned long *a = addr;
+	unsigned bit = nr & SZLONG_MASK;
+	unsigned long mask;
+	unsigned long flags;
+	unsigned long res;
+
+	a += nr >> SZLONG_LOG;
+	mask = 1UL << bit;
+	raw_local_irq_save(flags);
+	res = (mask & *a);
+	*a ^= mask;
+	raw_local_irq_restore(flags);
+	return res;
+}
+EXPORT_SYMBOL(__mips_test_and_change_bit);
diff --git a/arch/mips/lib/mips-atomic.c b/arch/mips/lib/mips-atomic.c
new file mode 100644
index 0000000..cd160be
--- /dev/null
+++ b/arch/mips/lib/mips-atomic.c
@@ -0,0 +1,176 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 95, 96, 97, 98, 99, 2003 by Ralf Baechle
+ * Copyright (C) 1996 by Paul M. Antoine
+ * Copyright (C) 1999 Silicon Graphics
+ * Copyright (C) 2000 MIPS Technologies, Inc.
+ */
+#include <asm/irqflags.h>
+#include <asm/hazards.h>
+#include <linux/compiler.h>
+#include <linux/preempt.h>
+#include <linux/export.h>
+
+#if !defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_MIPS_MT_SMTC)
+
+/*
+ * For cli() we have to insert nops to make sure that the new value
+ * has actually arrived in the status register before the end of this
+ * macro.
+ * R4000/R4400 need three nops, the R4600 two nops and the R10000 needs
+ * no nops at all.
+ */
+/*
+ * For TX49, operating only IE bit is not enough.
+ *
+ * If mfc0 $12 follows store and the mfc0 is last instruction of a
+ * page and fetching the next instruction causes TLB miss, the result
+ * of the mfc0 might wrongly contain EXL bit.
+ *
+ * ERT-TX49H2-027, ERT-TX49H3-012, ERT-TX49HL3-006, ERT-TX49H4-008
+ *
+ * Workaround: mask EXL bit of the result or place a nop before mfc0.
+ */
+__asm__(
+	"	.macro	arch_local_irq_disable\n"
+	"	.set	push						\n"
+	"	.set	noat						\n"
+#ifdef CONFIG_MIPS_MT_SMTC
+	"	mfc0	$1, $2, 1					\n"
+	"	ori	$1, 0x400					\n"
+	"	.set	noreorder					\n"
+	"	mtc0	$1, $2, 1					\n"
+#elif defined(CONFIG_CPU_MIPSR2)
+	/* see irqflags.h for inline function */
+#else
+	"	mfc0	$1,$12						\n"
+	"	ori	$1,0x1f						\n"
+	"	xori	$1,0x1f						\n"
+	"	.set	noreorder					\n"
+	"	mtc0	$1,$12						\n"
+#endif
+	"	irq_disable_hazard					\n"
+	"	.set	pop						\n"
+	"	.endm							\n");
+
+notrace void arch_local_irq_disable(void)
+{
+	preempt_disable();
+	__asm__ __volatile__(
+		"arch_local_irq_disable"
+		: /* no outputs */
+		: /* no inputs */
+		: "memory");
+	preempt_enable();
+}
+EXPORT_SYMBOL(arch_local_irq_disable);
+
+
+__asm__(
+	"	.macro	arch_local_irq_save result			\n"
+	"	.set	push						\n"
+	"	.set	reorder						\n"
+	"	.set	noat						\n"
+#ifdef CONFIG_MIPS_MT_SMTC
+	"	mfc0	\\result, $2, 1					\n"
+	"	ori	$1, \\result, 0x400				\n"
+	"	.set	noreorder					\n"
+	"	mtc0	$1, $2, 1					\n"
+	"	andi	\\result, \\result, 0x400			\n"
+#elif defined(CONFIG_CPU_MIPSR2)
+	/* see irqflags.h for inline function */
+#else
+	"	mfc0	\\result, $12					\n"
+	"	ori	$1, \\result, 0x1f				\n"
+	"	xori	$1, 0x1f					\n"
+	"	.set	noreorder					\n"
+	"	mtc0	$1, $12						\n"
+#endif
+	"	irq_disable_hazard					\n"
+	"	.set	pop						\n"
+	"	.endm							\n");
+
+notrace unsigned long arch_local_irq_save(void)
+{
+	unsigned long flags;
+	preempt_disable();
+	asm volatile("arch_local_irq_save\t%0"
+		     : "=r" (flags)
+		     : /* no inputs */
+		     : "memory");
+	preempt_enable();
+	return flags;
+}
+EXPORT_SYMBOL(arch_local_irq_save);
+
+
+__asm__(
+	"	.macro	arch_local_irq_restore flags			\n"
+	"	.set	push						\n"
+	"	.set	noreorder					\n"
+	"	.set	noat						\n"
+#ifdef CONFIG_MIPS_MT_SMTC
+	"mfc0	$1, $2, 1						\n"
+	"andi	\\flags, 0x400						\n"
+	"ori	$1, 0x400						\n"
+	"xori	$1, 0x400						\n"
+	"or	\\flags, $1						\n"
+	"mtc0	\\flags, $2, 1						\n"
+#elif defined(CONFIG_CPU_MIPSR2) && defined(CONFIG_IRQ_CPU)
+	/* see irqflags.h for inline function */
+#elif defined(CONFIG_CPU_MIPSR2)
+	/* see irqflags.h for inline function */
+#else
+	"	mfc0	$1, $12						\n"
+	"	andi	\\flags, 1					\n"
+	"	ori	$1, 0x1f					\n"
+	"	xori	$1, 0x1f					\n"
+	"	or	\\flags, $1					\n"
+	"	mtc0	\\flags, $12					\n"
+#endif
+	"	irq_disable_hazard					\n"
+	"	.set	pop						\n"
+	"	.endm							\n");
+
+notrace void arch_local_irq_restore(unsigned long flags)
+{
+	unsigned long __tmp1;
+
+#ifdef CONFIG_MIPS_MT_SMTC
+	/*
+	 * SMTC kernel needs to do a software replay of queued
+	 * IPIs, at the cost of branch and call overhead on each
+	 * local_irq_restore()
+	 */
+	if (unlikely(!(flags & 0x0400)))
+		smtc_ipi_replay();
+#endif
+	preempt_disable();
+	__asm__ __volatile__(
+		"arch_local_irq_restore\t%0"
+		: "=r" (__tmp1)
+		: "0" (flags)
+		: "memory");
+	preempt_enable();
+}
+EXPORT_SYMBOL(arch_local_irq_restore);
+
+
+notrace void __arch_local_irq_restore(unsigned long flags)
+{
+	unsigned long __tmp1;
+
+	preempt_disable();
+	__asm__ __volatile__(
+		"arch_local_irq_restore\t%0"
+		: "=r" (__tmp1)
+		: "0" (flags)
+		: "memory");
+	preempt_enable();
+}
+EXPORT_SYMBOL(__arch_local_irq_restore);
+
+#endif /* !defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_MIPS_MT_SMTC) */
diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c
index 4b9b935..88e79ad 100644
--- a/arch/mips/mm/tlb-r4k.c
+++ b/arch/mips/mm/tlb-r4k.c
@@ -120,18 +120,11 @@
 
 	if (cpu_context(cpu, mm) != 0) {
 		unsigned long size, flags;
-		int huge = is_vm_hugetlb_page(vma);
 
 		ENTER_CRITICAL(flags);
-		if (huge) {
-			start = round_down(start, HPAGE_SIZE);
-			end = round_up(end, HPAGE_SIZE);
-			size = (end - start) >> HPAGE_SHIFT;
-		} else {
-			start = round_down(start, PAGE_SIZE << 1);
-			end = round_up(end, PAGE_SIZE << 1);
-			size = (end - start) >> (PAGE_SHIFT + 1);
-		}
+		start = round_down(start, PAGE_SIZE << 1);
+		end = round_up(end, PAGE_SIZE << 1);
+		size = (end - start) >> (PAGE_SHIFT + 1);
 		if (size <= current_cpu_data.tlbsize/2) {
 			int oldpid = read_c0_entryhi();
 			int newpid = cpu_asid(cpu, mm);
@@ -140,10 +133,7 @@
 				int idx;
 
 				write_c0_entryhi(start | newpid);
-				if (huge)
-					start += HPAGE_SIZE;
-				else
-					start += (PAGE_SIZE << 1);
+				start += (PAGE_SIZE << 1);
 				mtc0_tlbw_hazard();
 				tlb_probe();
 				tlb_probe_hazard();
diff --git a/arch/mips/mti-malta/malta-platform.c b/arch/mips/mti-malta/malta-platform.c
index 80562b8..7473217 100644
--- a/arch/mips/mti-malta/malta-platform.c
+++ b/arch/mips/mti-malta/malta-platform.c
@@ -29,6 +29,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
+#include <asm/mips-boards/maltaint.h>
 #include <mtd/mtd-abi.h>
 
 #define SMC_PORT(base, int)						\
@@ -48,7 +49,7 @@
 	SMC_PORT(0x2F8, 3),
 	{
 		.mapbase	= 0x1f000900,	/* The CBUS UART */
-		.irq		= MIPS_CPU_IRQ_BASE + 2,
+		.irq		= MIPS_CPU_IRQ_BASE + MIPSCPU_INT_MB2,
 		.uartclk	= 3686400,	/* Twice the usual clk! */
 		.iotype		= UPIO_MEM32,
 		.flags		= CBUS_UART_FLAGS,
diff --git a/arch/mips/netlogic/dts/Makefile b/arch/mips/netlogic/dts/Makefile
index 67ae3fe2..d117d46 100644
--- a/arch/mips/netlogic/dts/Makefile
+++ b/arch/mips/netlogic/dts/Makefile
@@ -1,4 +1 @@
 obj-$(CONFIG_DT_XLP_EVP) := xlp_evp.dtb.o
-
-$(obj)/%.dtb: $(obj)/%.dts
-	$(call if_changed,dtc)
diff --git a/arch/openrisc/Makefile b/arch/openrisc/Makefile
index 966886c..4739b83 100644
--- a/arch/openrisc/Makefile
+++ b/arch/openrisc/Makefile
@@ -50,6 +50,6 @@
 else
 BUILTIN_DTB := n
 endif
-core-$(BUILTIN_DTB) += arch/openrisc/boot/
+core-$(BUILTIN_DTB) += arch/openrisc/boot/dts/
 
 all: vmlinux
diff --git a/arch/openrisc/boot/Makefile b/arch/openrisc/boot/dts/Makefile
similarity index 75%
rename from arch/openrisc/boot/Makefile
rename to arch/openrisc/boot/dts/Makefile
index 0995835..b092d30 100644
--- a/arch/openrisc/boot/Makefile
+++ b/arch/openrisc/boot/dts/Makefile
@@ -1,5 +1,3 @@
-
-
 ifneq '$(CONFIG_OPENRISC_BUILTIN_DTB)' '""'
 BUILTIN_DTB := $(patsubst "%",%,$(CONFIG_OPENRISC_BUILTIN_DTB)).dtb.o
 else
@@ -10,6 +8,3 @@
 clean-files := *.dtb.S
 
 #DTC_FLAGS ?= -p 1024
-
-$(obj)/%.dtb: $(src)/dts/%.dts FORCE
-	$(call if_changed_dep,dtc)
diff --git a/arch/openrisc/kernel/signal.c b/arch/openrisc/kernel/signal.c
index 3011029..ddedc8a 100644
--- a/arch/openrisc/kernel/signal.c
+++ b/arch/openrisc/kernel/signal.c
@@ -84,7 +84,6 @@
 {
 	struct rt_sigframe *frame = (struct rt_sigframe __user *)regs->sp;
 	sigset_t set;
-	stack_t st;
 
 	/*
 	 * Since we stacked the signal on a dword boundary,
@@ -104,11 +103,10 @@
 	if (restore_sigcontext(regs, &frame->uc.uc_mcontext))
 		goto badframe;
 
-	if (__copy_from_user(&st, &frame->uc.uc_stack, sizeof(st)))
-		goto badframe;
 	/* It is more difficult to avoid calling this function than to
 	   call it and ignore errors.  */
-	do_sigaltstack(&st, NULL, regs->sp);
+	if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->sp) == -EFAULT)
+		goto badframe;
 
 	return regs->gpr[11];
 
diff --git a/arch/parisc/kernel/signal32.c b/arch/parisc/kernel/signal32.c
index fd49aed..5dede04 100644
--- a/arch/parisc/kernel/signal32.c
+++ b/arch/parisc/kernel/signal32.c
@@ -65,7 +65,8 @@
 {
 	compat_sigset_t s;
 
-	if (sz != sizeof *set) panic("put_sigset32()");
+	if (sz != sizeof *set)
+		return -EINVAL;
 	sigset_64to32(&s, set);
 
 	return copy_to_user(up, &s, sizeof s);
@@ -77,7 +78,8 @@
 	compat_sigset_t s;
 	int r;
 
-	if (sz != sizeof *set) panic("put_sigset32()");
+	if (sz != sizeof *set)
+		return -EINVAL;
 
 	if ((r = copy_from_user(&s, up, sz)) == 0) {
 		sigset_32to64(set, &s);
diff --git a/arch/parisc/kernel/sys_parisc.c b/arch/parisc/kernel/sys_parisc.c
index 7426e40..f76c108 100644
--- a/arch/parisc/kernel/sys_parisc.c
+++ b/arch/parisc/kernel/sys_parisc.c
@@ -73,6 +73,8 @@
 	struct vm_area_struct *vma;
 	int offset = mapping ? get_offset(mapping) : 0;
 
+	offset = (offset + (pgoff << PAGE_SHIFT)) & 0x3FF000;
+
 	addr = DCACHE_ALIGN(addr - offset) + offset;
 
 	for (vma = find_vma(current->mm, addr); ; vma = vma->vm_next) {
diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S
index 3735abd..cbf5d59 100644
--- a/arch/parisc/kernel/syscall_table.S
+++ b/arch/parisc/kernel/syscall_table.S
@@ -60,7 +60,7 @@
 	ENTRY_SAME(fork_wrapper)
 	ENTRY_SAME(read)
 	ENTRY_SAME(write)
-	ENTRY_SAME(open)		/* 5 */
+	ENTRY_COMP(open)		/* 5 */
 	ENTRY_SAME(close)
 	ENTRY_SAME(waitpid)
 	ENTRY_SAME(creat)
diff --git a/arch/powerpc/boot/dts/mpc5200b.dtsi b/arch/powerpc/boot/dts/mpc5200b.dtsi
index 7ab286a..39ed65a 100644
--- a/arch/powerpc/boot/dts/mpc5200b.dtsi
+++ b/arch/powerpc/boot/dts/mpc5200b.dtsi
@@ -231,6 +231,12 @@
 			interrupts = <2 7 0>;
 		};
 
+		sclpc@3c00 {
+			compatible = "fsl,mpc5200-lpbfifo";
+			reg = <0x3c00 0x60>;
+			interrupts = <2 23 0>;
+		};
+
 		i2c@3d00 {
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/powerpc/boot/dts/o2d.dtsi b/arch/powerpc/boot/dts/o2d.dtsi
index 3444eb8..24f6680 100644
--- a/arch/powerpc/boot/dts/o2d.dtsi
+++ b/arch/powerpc/boot/dts/o2d.dtsi
@@ -86,12 +86,6 @@
 				reg = <0>;
 			};
 		};
-
-		sclpc@3c00 {
-			compatible = "fsl,mpc5200-lpbfifo";
-			reg = <0x3c00 0x60>;
-			interrupts = <3 23 0>;
-		};
 	};
 
 	localbus {
diff --git a/arch/powerpc/boot/dts/pcm030.dts b/arch/powerpc/boot/dts/pcm030.dts
index 9e35499..96512c0 100644
--- a/arch/powerpc/boot/dts/pcm030.dts
+++ b/arch/powerpc/boot/dts/pcm030.dts
@@ -59,7 +59,7 @@
 			#gpio-cells = <2>;
 		};
 
-		psc@2000 { /* PSC1 in ac97 mode */
+		audioplatform: psc@2000 { /* PSC1 in ac97 mode */
 			compatible = "mpc5200b-psc-ac97","fsl,mpc5200b-psc-ac97";
 			cell-index = <0>;
 		};
@@ -134,4 +134,9 @@
 	localbus {
 		status = "disabled";
 	};
+
+	sound {
+		compatible = "phytec,pcm030-audio-fabric";
+		asoc-platform = <&audioplatform>;
+	};
 };
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pic.c b/arch/powerpc/platforms/52xx/mpc52xx_pic.c
index 8520b58..b89ef65 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_pic.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_pic.c
@@ -372,10 +372,11 @@
 	case MPC52xx_IRQ_L1_MAIN: irqchip = &mpc52xx_main_irqchip; break;
 	case MPC52xx_IRQ_L1_PERP: irqchip = &mpc52xx_periph_irqchip; break;
 	case MPC52xx_IRQ_L1_SDMA: irqchip = &mpc52xx_sdma_irqchip; break;
-	default:
-		pr_err("%s: invalid irq: virq=%i, l1=%i, l2=%i\n",
-		       __func__, virq, l1irq, l2irq);
-		return -EINVAL;
+	case MPC52xx_IRQ_L1_CRIT:
+		pr_warn("%s: Critical IRQ #%d is unsupported! Nopping it.\n",
+			__func__, l2irq);
+		irq_set_chip(virq, &no_irq_chip);
+		return 0;
 	}
 
 	irq_set_chip_and_handler(virq, irqchip, handle_level_irq);
diff --git a/arch/powerpc/platforms/powermac/pfunc_core.c b/arch/powerpc/platforms/powermac/pfunc_core.c
index b0c3777..d588e48 100644
--- a/arch/powerpc/platforms/powermac/pfunc_core.c
+++ b/arch/powerpc/platforms/powermac/pfunc_core.c
@@ -686,7 +686,7 @@
 	int count = 0;
 
 	for (pp = dev->node->properties; pp != 0; pp = pp->next) {
-		char *name;
+		const char *name;
 		if (strncmp(pp->name, PP_PREFIX, plen) != 0)
 			continue;
 		name = pp->name + plen;
diff --git a/arch/powerpc/platforms/pseries/eeh_pe.c b/arch/powerpc/platforms/pseries/eeh_pe.c
index 797cd18..d16c8de 100644
--- a/arch/powerpc/platforms/pseries/eeh_pe.c
+++ b/arch/powerpc/platforms/pseries/eeh_pe.c
@@ -449,7 +449,7 @@
 			if (list_empty(&pe->edevs)) {
 				cnt = 0;
 				list_for_each_entry(child, &pe->child_list, child) {
-					if (!(pe->type & EEH_PE_INVALID)) {
+					if (!(child->type & EEH_PE_INVALID)) {
 						cnt++;
 						break;
 					}
diff --git a/arch/powerpc/platforms/pseries/msi.c b/arch/powerpc/platforms/pseries/msi.c
index d19f497..e5b0847 100644
--- a/arch/powerpc/platforms/pseries/msi.c
+++ b/arch/powerpc/platforms/pseries/msi.c
@@ -220,7 +220,8 @@
 
 	/* Get the top level device in the PE */
 	edev = of_node_to_eeh_dev(dn);
-	edev = list_first_entry(&edev->pe->edevs, struct eeh_dev, list);
+	if (edev->pe)
+		edev = list_first_entry(&edev->pe->edevs, struct eeh_dev, list);
 	dn = eeh_dev_to_of_node(edev);
 	if (!dn)
 		return NULL;
diff --git a/arch/powerpc/platforms/pseries/processor_idle.c b/arch/powerpc/platforms/pseries/processor_idle.c
index 45d00e5..4d806b4 100644
--- a/arch/powerpc/platforms/pseries/processor_idle.c
+++ b/arch/powerpc/platforms/pseries/processor_idle.c
@@ -36,7 +36,7 @@
 static inline void idle_loop_prolog(unsigned long *in_purr, ktime_t *kt_before)
 {
 
-	*kt_before = ktime_get_real();
+	*kt_before = ktime_get();
 	*in_purr = mfspr(SPRN_PURR);
 	/*
 	 * Indicate to the HV that we are idle. Now would be
@@ -50,7 +50,7 @@
 	get_lppaca()->wait_state_cycles += mfspr(SPRN_PURR) - in_purr;
 	get_lppaca()->idle = 0;
 
-	return ktime_to_us(ktime_sub(ktime_get_real(), kt_before));
+	return ktime_to_us(ktime_sub(ktime_get(), kt_before));
 }
 
 static int snooze_loop(struct cpuidle_device *dev,
diff --git a/arch/powerpc/platforms/pseries/reconfig.c b/arch/powerpc/platforms/pseries/reconfig.c
index 39f71fb..2f46681 100644
--- a/arch/powerpc/platforms/pseries/reconfig.c
+++ b/arch/powerpc/platforms/pseries/reconfig.c
@@ -281,12 +281,11 @@
 	if (!new)
 		return NULL;
 
-	if (!(new->name = kmalloc(strlen(name) + 1, GFP_KERNEL)))
+	if (!(new->name = kstrdup(name, GFP_KERNEL)))
 		goto cleanup;
 	if (!(new->value = kmalloc(length + 1, GFP_KERNEL)))
 		goto cleanup;
 
-	strcpy(new->name, name);
 	memcpy(new->value, value, length);
 	*(((char *)new->value) + length) = 0;
 	new->length = length;
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index ffb93ae..01b62a6 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -136,7 +136,7 @@
 	u32 pcicsrbar = 0, pcicsrbar_sz;
 	u32 piwar = PIWAR_EN | PIWAR_PF | PIWAR_TGI_LOCAL |
 			PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP;
-	char *name = hose->dn->full_name;
+	const char *name = hose->dn->full_name;
 	const u64 *reg;
 	int len;
 
diff --git a/arch/powerpc/sysdev/scom.c b/arch/powerpc/sysdev/scom.c
index 702256a..9193e12 100644
--- a/arch/powerpc/sysdev/scom.c
+++ b/arch/powerpc/sysdev/scom.c
@@ -157,7 +157,7 @@
 	ent->map = SCOM_MAP_INVALID;
 	spin_lock_init(&ent->lock);
 	snprintf(ent->name, 8, "scom%d", i);
-	ent->blob.data = dn->full_name;
+	ent->blob.data = (void*) dn->full_name;
 	ent->blob.size = strlen(dn->full_name);
 
 	dir = debugfs_create_dir(ent->name, root);
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 5dba755..d385f39 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -96,6 +96,7 @@
 	select HAVE_MEMBLOCK_NODE_MAP
 	select HAVE_CMPXCHG_LOCAL
 	select HAVE_CMPXCHG_DOUBLE
+	select HAVE_ALIGNED_STRUCT_PAGE if SLUB
 	select HAVE_VIRT_CPU_ACCOUNTING
 	select VIRT_CPU_ACCOUNTING
 	select ARCH_DISCARD_MEMBLOCK
diff --git a/arch/s390/include/asm/compat.h b/arch/s390/include/asm/compat.h
index a34a9d6..18cd6b5 100644
--- a/arch/s390/include/asm/compat.h
+++ b/arch/s390/include/asm/compat.h
@@ -20,7 +20,7 @@
 #define PSW32_MASK_CC		0x00003000UL
 #define PSW32_MASK_PM		0x00000f00UL
 
-#define PSW32_MASK_USER		0x00003F00UL
+#define PSW32_MASK_USER		0x0000FF00UL
 
 #define PSW32_ADDR_AMODE	0x80000000UL
 #define PSW32_ADDR_INSN		0x7FFFFFFFUL
diff --git a/arch/s390/include/asm/topology.h b/arch/s390/include/asm/topology.h
index 9ca3053..9935cbd 100644
--- a/arch/s390/include/asm/topology.h
+++ b/arch/s390/include/asm/topology.h
@@ -8,6 +8,9 @@
 
 #ifdef CONFIG_SCHED_BOOK
 
+extern unsigned char cpu_socket_id[NR_CPUS];
+#define topology_physical_package_id(cpu) (cpu_socket_id[cpu])
+
 extern unsigned char cpu_core_id[NR_CPUS];
 extern cpumask_t cpu_core_map[NR_CPUS];
 
diff --git a/arch/s390/include/uapi/asm/ptrace.h b/arch/s390/include/uapi/asm/ptrace.h
index 705588a..a5ca214 100644
--- a/arch/s390/include/uapi/asm/ptrace.h
+++ b/arch/s390/include/uapi/asm/ptrace.h
@@ -239,7 +239,7 @@
 #define PSW_MASK_EA		0x00000000UL
 #define PSW_MASK_BA		0x00000000UL
 
-#define PSW_MASK_USER		0x00003F00UL
+#define PSW_MASK_USER		0x0000FF00UL
 
 #define PSW_ADDR_AMODE		0x80000000UL
 #define PSW_ADDR_INSN		0x7FFFFFFFUL
@@ -269,7 +269,7 @@
 #define PSW_MASK_EA		0x0000000100000000UL
 #define PSW_MASK_BA		0x0000000080000000UL
 
-#define PSW_MASK_USER		0x00003F8180000000UL
+#define PSW_MASK_USER		0x0000FF8180000000UL
 
 #define PSW_ADDR_AMODE		0x0000000000000000UL
 #define PSW_ADDR_INSN		0xFFFFFFFFFFFFFFFFUL
diff --git a/arch/s390/kernel/compat_signal.c b/arch/s390/kernel/compat_signal.c
index a1e8a86..593fcc9 100644
--- a/arch/s390/kernel/compat_signal.c
+++ b/arch/s390/kernel/compat_signal.c
@@ -309,6 +309,10 @@
 	regs->psw.mask = (regs->psw.mask & ~PSW_MASK_USER) |
 		(__u64)(regs32.psw.mask & PSW32_MASK_USER) << 32 |
 		(__u64)(regs32.psw.addr & PSW32_ADDR_AMODE);
+	/* Check for invalid user address space control. */
+	if ((regs->psw.mask & PSW_MASK_ASC) >= (psw_kernel_bits & PSW_MASK_ASC))
+		regs->psw.mask = (psw_user_bits & PSW_MASK_ASC) |
+			(regs->psw.mask & ~PSW_MASK_ASC);
 	regs->psw.addr = (__u64)(regs32.psw.addr & PSW32_ADDR_INSN);
 	for (i = 0; i < NUM_GPRS; i++)
 		regs->gprs[i] = (__u64) regs32.gprs[i];
@@ -481,7 +485,10 @@
 
 	/* Set up registers for signal handler */
 	regs->gprs[15] = (__force __u64) frame;
-	regs->psw.mask |= PSW_MASK_BA;		/* force amode 31 */
+	/* Force 31 bit amode and default user address space control. */
+	regs->psw.mask = PSW_MASK_BA |
+		(psw_user_bits & PSW_MASK_ASC) |
+		(regs->psw.mask & ~PSW_MASK_ASC);
 	regs->psw.addr = (__force __u64) ka->sa.sa_handler;
 
 	regs->gprs[2] = map_signal(sig);
@@ -549,7 +556,10 @@
 
 	/* Set up registers for signal handler */
 	regs->gprs[15] = (__force __u64) frame;
-	regs->psw.mask |= PSW_MASK_BA;		/* force amode 31 */
+	/* Force 31 bit amode and default user address space control. */
+	regs->psw.mask = PSW_MASK_BA |
+		(psw_user_bits & PSW_MASK_ASC) |
+		(regs->psw.mask & ~PSW_MASK_ASC);
 	regs->psw.addr = (__u64) ka->sa.sa_handler;
 
 	regs->gprs[2] = map_signal(sig);
diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S
index ad79b84..827e094 100644
--- a/arch/s390/kernel/compat_wrapper.S
+++ b/arch/s390/kernel/compat_wrapper.S
@@ -28,7 +28,7 @@
 	llgtr	%r2,%r2			# const char *
 	lgfr	%r3,%r3			# int
 	lgfr	%r4,%r4			# int
-	jg	sys_open		# branch to system call
+	jg	compat_sys_open		# branch to system call
 
 ENTRY(sys32_close_wrapper)
 	llgfr	%r2,%r2			# unsigned int
diff --git a/arch/s390/kernel/signal.c b/arch/s390/kernel/signal.c
index c13a2a3..d1259d8 100644
--- a/arch/s390/kernel/signal.c
+++ b/arch/s390/kernel/signal.c
@@ -136,6 +136,10 @@
 	/* Use regs->psw.mask instead of psw_user_bits to preserve PER bit. */
 	regs->psw.mask = (regs->psw.mask & ~PSW_MASK_USER) |
 		(user_sregs.regs.psw.mask & PSW_MASK_USER);
+	/* Check for invalid user address space control. */
+	if ((regs->psw.mask & PSW_MASK_ASC) >= (psw_kernel_bits & PSW_MASK_ASC))
+		regs->psw.mask = (psw_user_bits & PSW_MASK_ASC) |
+			(regs->psw.mask & ~PSW_MASK_ASC);
 	/* Check for invalid amode */
 	if (regs->psw.mask & PSW_MASK_EA)
 		regs->psw.mask |= PSW_MASK_BA;
@@ -273,7 +277,10 @@
 
 	/* Set up registers for signal handler */
 	regs->gprs[15] = (unsigned long) frame;
-	regs->psw.mask |= PSW_MASK_EA | PSW_MASK_BA;	/* 64 bit amode */
+	/* Force default amode and default user address space control. */
+	regs->psw.mask = PSW_MASK_EA | PSW_MASK_BA |
+		(psw_user_bits & PSW_MASK_ASC) |
+		(regs->psw.mask & ~PSW_MASK_ASC);
 	regs->psw.addr = (unsigned long) ka->sa.sa_handler | PSW_ADDR_AMODE;
 
 	regs->gprs[2] = map_signal(sig);
@@ -346,7 +353,10 @@
 
 	/* Set up registers for signal handler */
 	regs->gprs[15] = (unsigned long) frame;
-	regs->psw.mask |= PSW_MASK_EA | PSW_MASK_BA;	/* 64 bit amode */
+	/* Force default amode and default user address space control. */
+	regs->psw.mask = PSW_MASK_EA | PSW_MASK_BA |
+		(psw_user_bits & PSW_MASK_ASC) |
+		(regs->psw.mask & ~PSW_MASK_ASC);
 	regs->psw.addr = (unsigned long) ka->sa.sa_handler | PSW_ADDR_AMODE;
 
 	regs->gprs[2] = map_signal(sig);
diff --git a/arch/s390/kernel/topology.c b/arch/s390/kernel/topology.c
index 54d93f4..dd55f7c 100644
--- a/arch/s390/kernel/topology.c
+++ b/arch/s390/kernel/topology.c
@@ -40,6 +40,7 @@
 static struct mask_info core_info;
 cpumask_t cpu_core_map[NR_CPUS];
 unsigned char cpu_core_id[NR_CPUS];
+unsigned char cpu_socket_id[NR_CPUS];
 
 static struct mask_info book_info;
 cpumask_t cpu_book_map[NR_CPUS];
@@ -83,11 +84,12 @@
 			cpumask_set_cpu(lcpu, &book->mask);
 			cpu_book_id[lcpu] = book->id;
 			cpumask_set_cpu(lcpu, &core->mask);
+			cpu_core_id[lcpu] = rcpu;
 			if (one_core_per_cpu) {
-				cpu_core_id[lcpu] = rcpu;
+				cpu_socket_id[lcpu] = rcpu;
 				core = core->next;
 			} else {
-				cpu_core_id[lcpu] = core->id;
+				cpu_socket_id[lcpu] = core->id;
 			}
 			smp_cpu_set_polarization(lcpu, tl_cpu->pp);
 		}
diff --git a/arch/s390/mm/gup.c b/arch/s390/mm/gup.c
index 8b82853..1f5315d1 100644
--- a/arch/s390/mm/gup.c
+++ b/arch/s390/mm/gup.c
@@ -180,8 +180,7 @@
 	addr = start;
 	len = (unsigned long) nr_pages << PAGE_SHIFT;
 	end = start + len;
-	if (unlikely(!access_ok(write ? VERIFY_WRITE : VERIFY_READ,
-					(void __user *)start, len)))
+	if ((end < start) || (end > TASK_SIZE))
 		return 0;
 
 	local_irq_save(flags);
@@ -229,7 +228,7 @@
 	addr = start;
 	len = (unsigned long) nr_pages << PAGE_SHIFT;
 	end = start + len;
-	if (end < start)
+	if ((end < start) || (end > TASK_SIZE))
 		goto slow_irqon;
 
 	/*
diff --git a/arch/score/kernel/signal.c b/arch/score/kernel/signal.c
index c268bbf..02353bd 100644
--- a/arch/score/kernel/signal.c
+++ b/arch/score/kernel/signal.c
@@ -148,7 +148,6 @@
 {
 	struct rt_sigframe __user *frame;
 	sigset_t set;
-	stack_t st;
 	int sig;
 
 	/* Always make any pending restarted system calls return -EINTR */
@@ -168,12 +167,10 @@
 	else if (sig)
 		force_sig(sig, current);
 
-	if (__copy_from_user(&st, &frame->rs_uc.uc_stack, sizeof(st)))
-		goto badframe;
-
 	/* It is more difficult to avoid calling this function than to
 	   call it and ignore errors.  */
-	do_sigaltstack((stack_t __user *)&st, NULL, regs->regs[0]);
+	if (do_sigaltstack(&frame->rs_uc.uc_stack, NULL, regs->regs[0]) == -EFAULT)
+		goto badframe;
 	regs->is_syscall = 0;
 
 	__asm__ __volatile__(
diff --git a/arch/sh/kernel/signal_64.c b/arch/sh/kernel/signal_64.c
index 2385381..d867cd9 100644
--- a/arch/sh/kernel/signal_64.c
+++ b/arch/sh/kernel/signal_64.c
@@ -347,7 +347,6 @@
 {
 	struct rt_sigframe __user *frame = (struct rt_sigframe __user *) (long) REF_REG_SP;
 	sigset_t set;
-	stack_t __user st;
 	long long ret;
 
 	/* Always make any pending restarted system calls return -EINTR */
@@ -365,11 +364,10 @@
 		goto badframe;
 	regs->pc -= 4;
 
-	if (__copy_from_user(&st, &frame->uc.uc_stack, sizeof(st)))
-		goto badframe;
 	/* It is more difficult to avoid calling this function than to
 	   call it and ignore errors.  */
-	do_sigaltstack(&st, NULL, REF_REG_SP);
+	if (do_sigaltstack(&frame->uc.uc_stack, NULL, REF_REG_SP) == -EFAULT)
+		goto badframe;
 
 	return (int) ret;
 
diff --git a/arch/sparc/boot/piggyback.c b/arch/sparc/boot/piggyback.c
index c0a798f..bb7c951 100644
--- a/arch/sparc/boot/piggyback.c
+++ b/arch/sparc/boot/piggyback.c
@@ -81,18 +81,18 @@
 
 static int start_line(const char *line)
 {
-	if (strcmp(line + 8, " T _start\n") == 0)
+	if (strcmp(line + 10, " _start\n") == 0)
 		return 1;
-	else if (strcmp(line + 16, " T _start\n") == 0)
+	else if (strcmp(line + 18, " _start\n") == 0)
 		return 1;
 	return 0;
 }
 
 static int end_line(const char *line)
 {
-	if (strcmp(line + 8, " A _end\n") == 0)
+	if (strcmp(line + 10, " _end\n") == 0)
 		return 1;
-	else if (strcmp (line + 16, " A _end\n") == 0)
+	else if (strcmp (line + 18, " _end\n") == 0)
 		return 1;
 	return 0;
 }
@@ -100,8 +100,8 @@
 /*
  * Find address for start and end in System.map.
  * The file looks like this:
- * f0004000 T _start
- * f0379f79 A _end
+ * f0004000 ... _start
+ * f0379f79 ... _end
  * 1234567890123456
  * ^coloumn 1
  * There is support for 64 bit addresses too.
diff --git a/arch/sparc/include/asm/prom.h b/arch/sparc/include/asm/prom.h
index f930031..67c6257 100644
--- a/arch/sparc/include/asm/prom.h
+++ b/arch/sparc/include/asm/prom.h
@@ -63,10 +63,13 @@
 extern void irq_trans_init(struct device_node *dp);
 extern char *build_path_component(struct device_node *dp);
 
-/* SPARC has a local implementation */
+/* SPARC has local implementations */
 extern int of_address_to_resource(struct device_node *dev, int index,
 				  struct resource *r);
 #define of_address_to_resource of_address_to_resource
 
+void __iomem *of_iomap(struct device_node *node, int index);
+#define of_iomap of_iomap
+
 #endif /* __KERNEL__ */
 #endif /* _SPARC_PROM_H */
diff --git a/arch/sparc/kernel/pci_impl.h b/arch/sparc/kernel/pci_impl.h
index 918a203..5f68853 100644
--- a/arch/sparc/kernel/pci_impl.h
+++ b/arch/sparc/kernel/pci_impl.h
@@ -88,7 +88,7 @@
 	int				chip_revision;
 
 	/* Name used for top-level resources. */
-	char				*name;
+	const char			*name;
 
 	/* OBP specific information. */
 	struct platform_device		*op;
diff --git a/arch/sparc/kernel/signal_64.c b/arch/sparc/kernel/signal_64.c
index 867de2f..689e1ba 100644
--- a/arch/sparc/kernel/signal_64.c
+++ b/arch/sparc/kernel/signal_64.c
@@ -295,9 +295,7 @@
 		err |= restore_fpu_state(regs, fpu_save);
 
 	err |= __copy_from_user(&set, &sf->mask, sizeof(sigset_t));
-	err |= do_sigaltstack(&sf->stack, NULL, (unsigned long)sf);
-
-	if (err)
+	if (err || do_sigaltstack(&sf->stack, NULL, (unsigned long)sf) == -EFAULT)
 		goto segv;
 
 	err |= __get_user(rwin_save, &sf->rwin_save);
diff --git a/arch/sparc/kernel/sys32.S b/arch/sparc/kernel/sys32.S
index 44025f4..8475a47 100644
--- a/arch/sparc/kernel/sys32.S
+++ b/arch/sparc/kernel/sys32.S
@@ -47,7 +47,7 @@
 	sra	REG4, 0, REG4
 
 SIGN1(sys32_exit, sparc_exit, %o0)
-SIGN1(sys32_exit_group, sys_exit_group, %o0)
+SIGN1(sys32_exit_group, sparc_exit_group, %o0)
 SIGN1(sys32_wait4, compat_sys_wait4, %o2)
 SIGN1(sys32_creat, sys_creat, %o1)
 SIGN1(sys32_mknod, sys_mknod, %o1)
diff --git a/arch/sparc/kernel/syscalls.S b/arch/sparc/kernel/syscalls.S
index 7f5f65d..bf23477 100644
--- a/arch/sparc/kernel/syscalls.S
+++ b/arch/sparc/kernel/syscalls.S
@@ -118,10 +118,20 @@
 	ba,pt	%xcc, ret_sys_call
 	 ldx	[%sp + PTREGS_OFF + PT_V9_I0], %o0
 
+	.globl	sparc_exit_group
+	.type	sparc_exit_group,#function
+sparc_exit_group:
+	sethi	%hi(sys_exit_group), %g7
+	ba,pt	%xcc, 1f
+	 or	%g7, %lo(sys_exit_group), %g7
+	.size	sparc_exit_group,.-sparc_exit_group
+
 	.globl	sparc_exit
 	.type	sparc_exit,#function
 sparc_exit:
-	rdpr	%pstate, %g2
+	sethi	%hi(sys_exit), %g7
+	or	%g7, %lo(sys_exit), %g7
+1:	rdpr	%pstate, %g2
 	wrpr	%g2, PSTATE_IE, %pstate
 	rdpr	%otherwin, %g1
 	rdpr	%cansave, %g3
@@ -129,7 +139,7 @@
 	wrpr	%g3, 0x0, %cansave
 	wrpr	%g0, 0x0, %otherwin
 	wrpr	%g2, 0x0, %pstate
-	ba,pt	%xcc, sys_exit
+	jmpl	%g7, %g0
 	 stb	%g0, [%g6 + TI_WSAVED]
 	.size	sparc_exit,.-sparc_exit
 
diff --git a/arch/sparc/kernel/systbls_64.S b/arch/sparc/kernel/systbls_64.S
index 1c9af9f..017b74a 100644
--- a/arch/sparc/kernel/systbls_64.S
+++ b/arch/sparc/kernel/systbls_64.S
@@ -133,7 +133,7 @@
 /*170*/	.word sys_lsetxattr, sys_fsetxattr, sys_getxattr, sys_lgetxattr, sys_getdents
 	.word sys_setsid, sys_fchdir, sys_fgetxattr, sys_listxattr, sys_llistxattr
 /*180*/	.word sys_flistxattr, sys_removexattr, sys_lremovexattr, sys_nis_syscall, sys_ni_syscall
-	.word sys_setpgid, sys_fremovexattr, sys_tkill, sys_exit_group, sys_newuname
+	.word sys_setpgid, sys_fremovexattr, sys_tkill, sparc_exit_group, sys_newuname
 /*190*/	.word sys_init_module, sys_sparc64_personality, sys_remap_file_pages, sys_epoll_create, sys_epoll_ctl
 	.word sys_epoll_wait, sys_ioprio_set, sys_getppid, sys_nis_syscall, sys_sgetmask
 /*200*/	.word sys_ssetmask, sys_nis_syscall, sys_newlstat, sys_uselib, sys_nis_syscall
diff --git a/arch/um/kernel/exec.c b/arch/um/kernel/exec.c
index 3a8ece7..0d7103c 100644
--- a/arch/um/kernel/exec.c
+++ b/arch/um/kernel/exec.c
@@ -32,13 +32,14 @@
 		       "err = %d\n", ret);
 		force_sig(SIGKILL, current);
 	}
+	get_safe_registers(current_pt_regs()->regs.gp,
+			   current_pt_regs()->regs.fp);
 
 	__switch_mm(&current->mm->context.id);
 }
 
 void start_thread(struct pt_regs *regs, unsigned long eip, unsigned long esp)
 {
-	get_safe_registers(regs->regs.gp, regs->regs.fp);
 	PT_REGS_IP(regs) = eip;
 	PT_REGS_SP(regs) = esp;
 	current->ptrace &= ~PT_DTRACE;
diff --git a/arch/unicore32/Kconfig b/arch/unicore32/Kconfig
index e5c5473..c4fbb21 100644
--- a/arch/unicore32/Kconfig
+++ b/arch/unicore32/Kconfig
@@ -16,6 +16,8 @@
 	select ARCH_WANT_FRAME_POINTERS
 	select GENERIC_IOMAP
 	select MODULES_USE_ELF_REL
+	select GENERIC_KERNEL_THREAD
+	select GENERIC_KERNEL_EXECVE
 	help
 	  UniCore-32 is 32-bit Instruction Set Architecture,
 	  including a series of low-power-consumption RISC chip
@@ -64,6 +66,9 @@
 config ARCH_MAY_HAVE_PC_FDC
 	bool
 
+config ZONE_DMA
+	def_bool y
+
 config NEED_DMA_MAP_STATE
        def_bool y
 
@@ -216,7 +221,7 @@
 	bool
 	depends on !ARCH_FPGA
 	select GENERIC_GPIO
-	select GPIO_SYSFS if EXPERIMENTAL
+	select GPIO_SYSFS
 	default y
 
 if PUV3_NB0916
diff --git a/arch/unicore32/include/asm/Kbuild b/arch/unicore32/include/asm/Kbuild
index c910c98..601e92f 100644
--- a/arch/unicore32/include/asm/Kbuild
+++ b/arch/unicore32/include/asm/Kbuild
@@ -1,4 +1,3 @@
-include include/asm-generic/Kbuild.asm
 
 generic-y += atomic.h
 generic-y += auxvec.h
diff --git a/arch/unicore32/include/asm/bug.h b/arch/unicore32/include/asm/bug.h
index b1ff8ca..93a56f3 100644
--- a/arch/unicore32/include/asm/bug.h
+++ b/arch/unicore32/include/asm/bug.h
@@ -19,9 +19,4 @@
 extern void uc32_notify_die(const char *str, struct pt_regs *regs,
 		struct siginfo *info, unsigned long err, unsigned long trap);
 
-extern asmlinkage void __backtrace(void);
-extern asmlinkage void c_backtrace(unsigned long fp, int pmode);
-
-extern void __show_regs(struct pt_regs *);
-
 #endif /* __UNICORE_BUG_H__ */
diff --git a/arch/unicore32/include/asm/cmpxchg.h b/arch/unicore32/include/asm/cmpxchg.h
index df4d5ac..8e797ad 100644
--- a/arch/unicore32/include/asm/cmpxchg.h
+++ b/arch/unicore32/include/asm/cmpxchg.h
@@ -35,7 +35,7 @@
 			: "memory", "cc");
 		break;
 	default:
-		ret = __xchg_bad_pointer();
+		__xchg_bad_pointer();
 	}
 
 	return ret;
diff --git a/arch/unicore32/include/asm/kvm_para.h b/arch/unicore32/include/asm/kvm_para.h
deleted file mode 100644
index 14fab8f..0000000
--- a/arch/unicore32/include/asm/kvm_para.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/kvm_para.h>
diff --git a/arch/unicore32/include/asm/processor.h b/arch/unicore32/include/asm/processor.h
index 14382cb..4eaa421 100644
--- a/arch/unicore32/include/asm/processor.h
+++ b/arch/unicore32/include/asm/processor.h
@@ -72,11 +72,6 @@
 
 #define cpu_relax()			barrier()
 
-/*
- * Create a new kernel thread
- */
-extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
-
 #define task_pt_regs(p) \
 	((struct pt_regs *)(THREAD_START_SP + task_stack_page(p)) - 1)
 
diff --git a/arch/unicore32/include/asm/ptrace.h b/arch/unicore32/include/asm/ptrace.h
index b9caf9b..726749d 100644
--- a/arch/unicore32/include/asm/ptrace.h
+++ b/arch/unicore32/include/asm/ptrace.h
@@ -12,80 +12,10 @@
 #ifndef __UNICORE_PTRACE_H__
 #define __UNICORE_PTRACE_H__
 
-#define PTRACE_GET_THREAD_AREA	22
-
-/*
- * PSR bits
- */
-#define USER_MODE	0x00000010
-#define REAL_MODE	0x00000011
-#define INTR_MODE	0x00000012
-#define PRIV_MODE	0x00000013
-#define ABRT_MODE	0x00000017
-#define EXTN_MODE	0x0000001b
-#define SUSR_MODE	0x0000001f
-#define MODE_MASK	0x0000001f
-#define PSR_R_BIT	0x00000040
-#define PSR_I_BIT	0x00000080
-#define PSR_V_BIT	0x10000000
-#define PSR_C_BIT	0x20000000
-#define PSR_Z_BIT	0x40000000
-#define PSR_S_BIT	0x80000000
-
-/*
- * Groups of PSR bits
- */
-#define PSR_f		0xff000000	/* Flags		*/
-#define PSR_c		0x000000ff	/* Control		*/
+#include <uapi/asm/ptrace.h>
 
 #ifndef __ASSEMBLY__
 
-/*
- * This struct defines the way the registers are stored on the
- * stack during a system call.  Note that sizeof(struct pt_regs)
- * has to be a multiple of 8.
- */
-struct pt_regs {
-	unsigned long uregs[34];
-};
-
-#define UCreg_asr		uregs[32]
-#define UCreg_pc		uregs[31]
-#define UCreg_lr		uregs[30]
-#define UCreg_sp		uregs[29]
-#define UCreg_ip		uregs[28]
-#define UCreg_fp		uregs[27]
-#define UCreg_26		uregs[26]
-#define UCreg_25		uregs[25]
-#define UCreg_24		uregs[24]
-#define UCreg_23		uregs[23]
-#define UCreg_22		uregs[22]
-#define UCreg_21		uregs[21]
-#define UCreg_20		uregs[20]
-#define UCreg_19		uregs[19]
-#define UCreg_18		uregs[18]
-#define UCreg_17		uregs[17]
-#define UCreg_16		uregs[16]
-#define UCreg_15		uregs[15]
-#define UCreg_14		uregs[14]
-#define UCreg_13		uregs[13]
-#define UCreg_12		uregs[12]
-#define UCreg_11		uregs[11]
-#define UCreg_10		uregs[10]
-#define UCreg_09		uregs[9]
-#define UCreg_08		uregs[8]
-#define UCreg_07		uregs[7]
-#define UCreg_06		uregs[6]
-#define UCreg_05		uregs[5]
-#define UCreg_04		uregs[4]
-#define UCreg_03		uregs[3]
-#define UCreg_02		uregs[2]
-#define UCreg_01		uregs[1]
-#define UCreg_00		uregs[0]
-#define UCreg_ORIG_00		uregs[33]
-
-#ifdef __KERNEL__
-
 #define user_mode(regs)	\
 	(processor_mode(regs) == USER_MODE)
 
@@ -125,9 +55,5 @@
 
 #define instruction_pointer(regs)	((regs)->UCreg_pc)
 
-#endif /* __KERNEL__ */
-
 #endif /* __ASSEMBLY__ */
-
 #endif
-
diff --git a/arch/unicore32/include/uapi/asm/Kbuild b/arch/unicore32/include/uapi/asm/Kbuild
index baebb3d..0514d7a 100644
--- a/arch/unicore32/include/uapi/asm/Kbuild
+++ b/arch/unicore32/include/uapi/asm/Kbuild
@@ -1,3 +1,10 @@
 # UAPI Header export list
 include include/uapi/asm-generic/Kbuild.asm
 
+header-y += byteorder.h
+header-y += kvm_para.h
+header-y += ptrace.h
+header-y += sigcontext.h
+header-y += unistd.h
+
+generic-y += kvm_para.h
diff --git a/arch/unicore32/include/asm/byteorder.h b/arch/unicore32/include/uapi/asm/byteorder.h
similarity index 100%
rename from arch/unicore32/include/asm/byteorder.h
rename to arch/unicore32/include/uapi/asm/byteorder.h
diff --git a/arch/unicore32/include/uapi/asm/ptrace.h b/arch/unicore32/include/uapi/asm/ptrace.h
new file mode 100644
index 0000000..187aa2e
--- /dev/null
+++ b/arch/unicore32/include/uapi/asm/ptrace.h
@@ -0,0 +1,90 @@
+/*
+ * linux/arch/unicore32/include/asm/ptrace.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _UAPI__UNICORE_PTRACE_H__
+#define _UAPI__UNICORE_PTRACE_H__
+
+#define PTRACE_GET_THREAD_AREA	22
+
+/*
+ * PSR bits
+ */
+#define USER_MODE	0x00000010
+#define REAL_MODE	0x00000011
+#define INTR_MODE	0x00000012
+#define PRIV_MODE	0x00000013
+#define ABRT_MODE	0x00000017
+#define EXTN_MODE	0x0000001b
+#define SUSR_MODE	0x0000001f
+#define MODE_MASK	0x0000001f
+#define PSR_R_BIT	0x00000040
+#define PSR_I_BIT	0x00000080
+#define PSR_V_BIT	0x10000000
+#define PSR_C_BIT	0x20000000
+#define PSR_Z_BIT	0x40000000
+#define PSR_S_BIT	0x80000000
+
+/*
+ * Groups of PSR bits
+ */
+#define PSR_f		0xff000000	/* Flags		*/
+#define PSR_c		0x000000ff	/* Control		*/
+
+#ifndef __ASSEMBLY__
+
+/*
+ * This struct defines the way the registers are stored on the
+ * stack during a system call.  Note that sizeof(struct pt_regs)
+ * has to be a multiple of 8.
+ */
+struct pt_regs {
+	unsigned long uregs[34];
+};
+
+#define UCreg_asr		uregs[32]
+#define UCreg_pc		uregs[31]
+#define UCreg_lr		uregs[30]
+#define UCreg_sp		uregs[29]
+#define UCreg_ip		uregs[28]
+#define UCreg_fp		uregs[27]
+#define UCreg_26		uregs[26]
+#define UCreg_25		uregs[25]
+#define UCreg_24		uregs[24]
+#define UCreg_23		uregs[23]
+#define UCreg_22		uregs[22]
+#define UCreg_21		uregs[21]
+#define UCreg_20		uregs[20]
+#define UCreg_19		uregs[19]
+#define UCreg_18		uregs[18]
+#define UCreg_17		uregs[17]
+#define UCreg_16		uregs[16]
+#define UCreg_15		uregs[15]
+#define UCreg_14		uregs[14]
+#define UCreg_13		uregs[13]
+#define UCreg_12		uregs[12]
+#define UCreg_11		uregs[11]
+#define UCreg_10		uregs[10]
+#define UCreg_09		uregs[9]
+#define UCreg_08		uregs[8]
+#define UCreg_07		uregs[7]
+#define UCreg_06		uregs[6]
+#define UCreg_05		uregs[5]
+#define UCreg_04		uregs[4]
+#define UCreg_03		uregs[3]
+#define UCreg_02		uregs[2]
+#define UCreg_01		uregs[1]
+#define UCreg_00		uregs[0]
+#define UCreg_ORIG_00		uregs[33]
+
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _UAPI__UNICORE_PTRACE_H__ */
diff --git a/arch/unicore32/include/asm/sigcontext.h b/arch/unicore32/include/uapi/asm/sigcontext.h
similarity index 100%
rename from arch/unicore32/include/asm/sigcontext.h
rename to arch/unicore32/include/uapi/asm/sigcontext.h
diff --git a/arch/unicore32/include/asm/unistd.h b/arch/unicore32/include/uapi/asm/unistd.h
similarity index 92%
rename from arch/unicore32/include/asm/unistd.h
rename to arch/unicore32/include/uapi/asm/unistd.h
index 2abcf61..d18a3be8 100644
--- a/arch/unicore32/include/asm/unistd.h
+++ b/arch/unicore32/include/uapi/asm/unistd.h
@@ -12,3 +12,4 @@
 
 /* Use the standard ABI for syscalls. */
 #include <asm-generic/unistd.h>
+#define __ARCH_WANT_SYS_EXECVE
diff --git a/arch/unicore32/kernel/entry.S b/arch/unicore32/kernel/entry.S
index dcb87ab..7049350 100644
--- a/arch/unicore32/kernel/entry.S
+++ b/arch/unicore32/kernel/entry.S
@@ -573,17 +573,16 @@
  */
 ENTRY(ret_from_fork)
 	b.l	schedule_tail
-	get_thread_info tsk
-	ldw	r1, [tsk+], #TI_FLAGS		@ check for syscall tracing
-	mov	why, #1
-	cand.a	r1, #_TIF_SYSCALL_TRACE		@ are we tracing syscalls?
-	beq	ret_slow_syscall
-	mov	r1, sp
-	mov	r0, #1				@ trace exit [IP = 1]
-	b.l	syscall_trace
 	b	ret_slow_syscall
 ENDPROC(ret_from_fork)
 
+ENTRY(ret_from_kernel_thread)
+	b.l	schedule_tail
+	mov	r0, r5
+	adr	lr, ret_slow_syscall
+	mov	pc, r4
+ENDPROC(ret_from_kernel_thread)
+
 /*=============================================================================
  * SWI handler
  *-----------------------------------------------------------------------------
@@ -669,11 +668,6 @@
 #endif
 	.ltorg
 
-ENTRY(sys_execve)
-		add	r3, sp, #S_OFF
-		b	__sys_execve
-ENDPROC(sys_execve)
-
 ENTRY(sys_clone)
 		add	ip, sp, #S_OFF
 		stw	ip, [sp+], #4
diff --git a/arch/unicore32/kernel/process.c b/arch/unicore32/kernel/process.c
index b008586..a8fe265 100644
--- a/arch/unicore32/kernel/process.c
+++ b/arch/unicore32/kernel/process.c
@@ -258,6 +258,7 @@
 }
 
 asmlinkage void ret_from_fork(void) __asm__("ret_from_fork");
+asmlinkage void ret_from_kernel_thread(void) __asm__("ret_from_kernel_thread");
 
 int
 copy_thread(unsigned long clone_flags, unsigned long stack_start,
@@ -266,17 +267,22 @@
 	struct thread_info *thread = task_thread_info(p);
 	struct pt_regs *childregs = task_pt_regs(p);
 
-	*childregs = *regs;
-	childregs->UCreg_00 = 0;
-	childregs->UCreg_sp = stack_start;
-
 	memset(&thread->cpu_context, 0, sizeof(struct cpu_context_save));
 	thread->cpu_context.sp = (unsigned long)childregs;
-	thread->cpu_context.pc = (unsigned long)ret_from_fork;
+	if (unlikely(!regs)) {
+		thread->cpu_context.pc = (unsigned long)ret_from_kernel_thread;
+		thread->cpu_context.r4 = stack_start;
+		thread->cpu_context.r5 = stk_sz;
+		memset(childregs, 0, sizeof(struct pt_regs));
+	} else {
+		thread->cpu_context.pc = (unsigned long)ret_from_fork;
+		*childregs = *regs;
+		childregs->UCreg_00 = 0;
+		childregs->UCreg_sp = stack_start;
 
-	if (clone_flags & CLONE_SETTLS)
-		childregs->UCreg_16 = regs->UCreg_03;
-
+		if (clone_flags & CLONE_SETTLS)
+			childregs->UCreg_16 = regs->UCreg_03;
+	}
 	return 0;
 }
 
@@ -305,42 +311,6 @@
 }
 EXPORT_SYMBOL(dump_fpu);
 
-/*
- * Shuffle the argument into the correct register before calling the
- * thread function.  r1 is the thread argument, r2 is the pointer to
- * the thread function, and r3 points to the exit function.
- */
-asm(".pushsection .text\n"
-"	.align\n"
-"	.type	kernel_thread_helper, #function\n"
-"kernel_thread_helper:\n"
-"	mov.a	asr, r7\n"
-"	mov	r0, r4\n"
-"	mov	lr, r6\n"
-"	mov	pc, r5\n"
-"	.size	kernel_thread_helper, . - kernel_thread_helper\n"
-"	.popsection");
-
-/*
- * Create a kernel thread.
- */
-pid_t kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
-{
-	struct pt_regs regs;
-
-	memset(&regs, 0, sizeof(regs));
-
-	regs.UCreg_04 = (unsigned long)arg;
-	regs.UCreg_05 = (unsigned long)fn;
-	regs.UCreg_06 = (unsigned long)do_exit;
-	regs.UCreg_07 = PRIV_MODE;
-	regs.UCreg_pc = (unsigned long)kernel_thread_helper;
-	regs.UCreg_asr = regs.UCreg_07 | PSR_I_BIT;
-
-	return do_fork(flags|CLONE_VM|CLONE_UNTRACED, 0, &regs, 0, NULL, NULL);
-}
-EXPORT_SYMBOL(kernel_thread);
-
 unsigned long get_wchan(struct task_struct *p)
 {
 	struct stackframe frame;
diff --git a/arch/unicore32/kernel/setup.h b/arch/unicore32/kernel/setup.h
index f239550..30f749d 100644
--- a/arch/unicore32/kernel/setup.h
+++ b/arch/unicore32/kernel/setup.h
@@ -30,4 +30,10 @@
 extern void kernel_thread_helper(void);
 
 extern void __init early_signal_init(void);
+
+extern asmlinkage void __backtrace(void);
+extern asmlinkage void c_backtrace(unsigned long fp, int pmode);
+
+extern void __show_regs(struct pt_regs *);
+
 #endif
diff --git a/arch/unicore32/kernel/sys.c b/arch/unicore32/kernel/sys.c
index fabdee9..9680134 100644
--- a/arch/unicore32/kernel/sys.c
+++ b/arch/unicore32/kernel/sys.c
@@ -42,69 +42,6 @@
 			parent_tid, child_tid);
 }
 
-/* sys_execve() executes a new program.
- * This is called indirectly via a small wrapper
- */
-asmlinkage long __sys_execve(const char __user *filename,
-			  const char __user *const __user *argv,
-			  const char __user *const __user *envp,
-			  struct pt_regs *regs)
-{
-	int error;
-	struct filename *fn;
-
-	fn = getname(filename);
-	error = PTR_ERR(fn);
-	if (IS_ERR(fn))
-		goto out;
-	error = do_execve(fn->name, argv, envp, regs);
-	putname(fn);
-out:
-	return error;
-}
-
-int kernel_execve(const char *filename,
-		  const char *const argv[],
-		  const char *const envp[])
-{
-	struct pt_regs regs;
-	int ret;
-
-	memset(&regs, 0, sizeof(struct pt_regs));
-	ret = do_execve(filename,
-			(const char __user *const __user *)argv,
-			(const char __user *const __user *)envp, &regs);
-	if (ret < 0)
-		goto out;
-
-	/*
-	 * Save argc to the register structure for userspace.
-	 */
-	regs.UCreg_00 = ret;
-
-	/*
-	 * We were successful.  We won't be returning to our caller, but
-	 * instead to user space by manipulating the kernel stack.
-	 */
-	asm("add	r0, %0, %1\n\t"
-		"mov	r1, %2\n\t"
-		"mov	r2, %3\n\t"
-		"mov	r22, #0\n\t"	/* not a syscall */
-		"mov	r23, %0\n\t"	/* thread structure */
-		"b.l	memmove\n\t"	/* copy regs to top of stack */
-		"mov	sp, r0\n\t"	/* reposition stack pointer */
-		"b	ret_to_user"
-		:
-		: "r" (current_thread_info()),
-		  "Ir" (THREAD_START_SP - sizeof(regs)),
-		  "r" (&regs),
-		  "Ir" (sizeof(regs))
-		: "r0", "r1", "r2", "r3", "ip", "lr", "memory");
-
- out:
-	return ret;
-}
-
 /* Note: used by the compat code even in 64-bit Linux. */
 SYSCALL_DEFINE6(mmap2, unsigned long, addr, unsigned long, len,
 		unsigned long, prot, unsigned long, flags,
diff --git a/arch/unicore32/mm/fault.c b/arch/unicore32/mm/fault.c
index 2eeb9c0..f9b5c10 100644
--- a/arch/unicore32/mm/fault.c
+++ b/arch/unicore32/mm/fault.c
@@ -168,7 +168,7 @@
 }
 
 static int __do_pf(struct mm_struct *mm, unsigned long addr, unsigned int fsr,
-		struct task_struct *tsk)
+		unsigned int flags, struct task_struct *tsk)
 {
 	struct vm_area_struct *vma;
 	int fault;
@@ -194,14 +194,7 @@
 	 * If for any reason at all we couldn't handle the fault, make
 	 * sure we exit gracefully rather than endlessly redo the fault.
 	 */
-	fault = handle_mm_fault(mm, vma, addr & PAGE_MASK,
-			    (!(fsr ^ 0x12)) ? FAULT_FLAG_WRITE : 0);
-	if (unlikely(fault & VM_FAULT_ERROR))
-		return fault;
-	if (fault & VM_FAULT_MAJOR)
-		tsk->maj_flt++;
-	else
-		tsk->min_flt++;
+	fault = handle_mm_fault(mm, vma, addr & PAGE_MASK, flags);
 	return fault;
 
 check_stack:
@@ -216,6 +209,8 @@
 	struct task_struct *tsk;
 	struct mm_struct *mm;
 	int fault, sig, code;
+	unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE |
+				 ((!(fsr ^ 0x12)) ? FAULT_FLAG_WRITE : 0);
 
 	tsk = current;
 	mm = tsk->mm;
@@ -236,6 +231,7 @@
 		if (!user_mode(regs)
 		    && !search_exception_tables(regs->UCreg_pc))
 			goto no_context;
+retry:
 		down_read(&mm->mmap_sem);
 	} else {
 		/*
@@ -251,7 +247,28 @@
 #endif
 	}
 
-	fault = __do_pf(mm, addr, fsr, tsk);
+	fault = __do_pf(mm, addr, fsr, flags, tsk);
+
+	/* If we need to retry but a fatal signal is pending, handle the
+	 * signal first. We do not need to release the mmap_sem because
+	 * it would already be released in __lock_page_or_retry in
+	 * mm/filemap.c. */
+	if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current))
+		return 0;
+
+	if (!(fault & VM_FAULT_ERROR) && (flags & FAULT_FLAG_ALLOW_RETRY)) {
+		if (fault & VM_FAULT_MAJOR)
+			tsk->maj_flt++;
+		else
+			tsk->min_flt++;
+		if (fault & VM_FAULT_RETRY) {
+			/* Clear FAULT_FLAG_ALLOW_RETRY to avoid any risk
+			* of starvation. */
+			flags &= ~FAULT_FLAG_ALLOW_RETRY;
+			goto retry;
+		}
+	}
+
 	up_read(&mm->mmap_sem);
 
 	/*
diff --git a/arch/x86/boot/compressed/eboot.c b/arch/x86/boot/compressed/eboot.c
index c760e07..e87b0ca 100644
--- a/arch/x86/boot/compressed/eboot.c
+++ b/arch/x86/boot/compressed/eboot.c
@@ -12,6 +12,8 @@
 #include <asm/setup.h>
 #include <asm/desc.h>
 
+#undef memcpy			/* Use memcpy from misc.c */
+
 #include "eboot.h"
 
 static efi_system_table_t *sys_table;
diff --git a/arch/x86/boot/header.S b/arch/x86/boot/header.S
index 2a01744..8c132a6 100644
--- a/arch/x86/boot/header.S
+++ b/arch/x86/boot/header.S
@@ -476,6 +476,3 @@
 setup_corrupt:
 	.byte	7
 	.string	"No setup signature found...\n"
-
-	.data
-dummy:	.long	0
diff --git a/arch/x86/include/asm/Kbuild b/arch/x86/include/asm/Kbuild
index 66e5f0e..79fd8a3 100644
--- a/arch/x86/include/asm/Kbuild
+++ b/arch/x86/include/asm/Kbuild
@@ -12,6 +12,7 @@
 header-y += msr-index.h
 header-y += msr.h
 header-y += mtrr.h
+header-y += perf_regs.h
 header-y += posix_types_32.h
 header-y += posix_types_64.h
 header-y += posix_types_x32.h
@@ -19,8 +20,10 @@
 header-y += processor-flags.h
 header-y += ptrace-abi.h
 header-y += sigcontext32.h
+header-y += svm.h
 header-y += ucontext.h
 header-y += vm86.h
+header-y += vmx.h
 header-y += vsyscall.h
 
 genhdr-y += unistd_32.h
diff --git a/arch/x86/include/asm/device.h b/arch/x86/include/asm/device.h
index 93e1c55..03dd729 100644
--- a/arch/x86/include/asm/device.h
+++ b/arch/x86/include/asm/device.h
@@ -2,9 +2,6 @@
 #define _ASM_X86_DEVICE_H
 
 struct dev_archdata {
-#ifdef CONFIG_ACPI
-	void	*acpi_handle;
-#endif
 #ifdef CONFIG_X86_DEV_DMA_OPS
 	struct dma_map_ops *dma_ops;
 #endif
diff --git a/arch/x86/include/asm/fpu-internal.h b/arch/x86/include/asm/fpu-internal.h
index 831dbb9..41ab26e 100644
--- a/arch/x86/include/asm/fpu-internal.h
+++ b/arch/x86/include/asm/fpu-internal.h
@@ -399,14 +399,17 @@
 typedef struct { int preload; } fpu_switch_t;
 
 /*
- * FIXME! We could do a totally lazy restore, but we need to
- * add a per-cpu "this was the task that last touched the FPU
- * on this CPU" variable, and the task needs to have a "I last
- * touched the FPU on this CPU" and check them.
+ * Must be run with preemption disabled: this clears the fpu_owner_task,
+ * on this CPU.
  *
- * We don't do that yet, so "fpu_lazy_restore()" always returns
- * false, but some day..
+ * This will disable any lazy FPU state restore of the current FPU state,
+ * but if the current thread owns the FPU, it will still be saved by.
  */
+static inline void __cpu_disable_lazy_restore(unsigned int cpu)
+{
+	per_cpu(fpu_owner_task, cpu) = NULL;
+}
+
 static inline int fpu_lazy_restore(struct task_struct *new, unsigned int cpu)
 {
 	return new == this_cpu_read_stable(fpu_owner_task) &&
diff --git a/arch/x86/include/asm/ptrace.h b/arch/x86/include/asm/ptrace.h
index dcfde52..19f16eb 100644
--- a/arch/x86/include/asm/ptrace.h
+++ b/arch/x86/include/asm/ptrace.h
@@ -205,21 +205,14 @@
 }
 #endif
 
-/*
- * X86_32 CPUs don't save ss and esp if the CPU is already in kernel mode
- * when it traps.  The previous stack will be directly underneath the saved
- * registers, and 'sp/ss' won't even have been saved. Thus the '&regs->sp'.
- *
- * This is valid only for kernel mode traps.
- */
+#ifdef CONFIG_X86_32
+extern unsigned long kernel_stack_pointer(struct pt_regs *regs);
+#else
 static inline unsigned long kernel_stack_pointer(struct pt_regs *regs)
 {
-#ifdef CONFIG_X86_32
-	return (unsigned long)(&regs->sp);
-#else
 	return regs->sp;
-#endif
 }
+#endif
 
 #define GET_IP(regs) ((regs)->ip)
 #define GET_FP(regs) ((regs)->bp)
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index e651f7a..e48cafc 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -574,6 +574,12 @@
 
 	return irq;
 }
+EXPORT_SYMBOL_GPL(acpi_register_gsi);
+
+void acpi_unregister_gsi(u32 gsi)
+{
+}
+EXPORT_SYMBOL_GPL(acpi_unregister_gsi);
 
 void __init acpi_set_irq_model_pic(void)
 {
diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c
index 11676cf..d5e0d71 100644
--- a/arch/x86/kernel/acpi/sleep.c
+++ b/arch/x86/kernel/acpi/sleep.c
@@ -101,6 +101,8 @@
 #endif
 		if (strncmp(str, "nonvs", 5) == 0)
 			acpi_nvs_nosave();
+		if (strncmp(str, "nonvs_s3", 8) == 0)
+			acpi_nvs_nosave_s3();
 		if (strncmp(str, "old_ordering", 12) == 0)
 			acpi_old_suspend_ordering();
 		str = strchr(str, ',');
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index f7e98a2..1b7d165 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -631,6 +631,20 @@
 		}
 	}
 
+	/*
+	 * The way access filter has a performance penalty on some workloads.
+	 * Disable it on the affected CPUs.
+	 */
+	if ((c->x86 == 0x15) &&
+	    (c->x86_model >= 0x02) && (c->x86_model < 0x20)) {
+		u64 val;
+
+		if (!rdmsrl_safe(0xc0011021, &val) && !(val & 0x1E)) {
+			val |= 0x1E;
+			wrmsrl_safe(0xc0011021, val);
+		}
+	}
+
 	cpu_detect_cache_sizes(c);
 
 	/* Multi core CPU? */
diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd.c b/arch/x86/kernel/cpu/mcheck/mce_amd.c
index 698b6ec..1ac581f 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_amd.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_amd.c
@@ -6,7 +6,7 @@
  *
  *  Written by Jacob Shin - AMD, Inc.
  *
- *  Support: borislav.petkov@amd.com
+ *  Maintained by: Borislav Petkov <bp@alien8.de>
  *
  *  April 2006
  *     - added support for AMD Family 0x10 processors
diff --git a/arch/x86/kernel/cpu/mcheck/mce_intel.c b/arch/x86/kernel/cpu/mcheck/mce_intel.c
index 5f88abf..4f9a3cb 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_intel.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_intel.c
@@ -285,34 +285,39 @@
 	raw_spin_unlock_irqrestore(&cmci_discover_lock, flags);
 }
 
+static long cmci_rediscover_work_func(void *arg)
+{
+	int banks;
+
+	/* Recheck banks in case CPUs don't all have the same */
+	if (cmci_supported(&banks))
+		cmci_discover(banks);
+
+	return 0;
+}
+
 /*
  * After a CPU went down cycle through all the others and rediscover
  * Must run in process context.
  */
 void cmci_rediscover(int dying)
 {
-	int banks;
-	int cpu;
-	cpumask_var_t old;
+	int cpu, banks;
 
 	if (!cmci_supported(&banks))
 		return;
-	if (!alloc_cpumask_var(&old, GFP_KERNEL))
-		return;
-	cpumask_copy(old, &current->cpus_allowed);
 
 	for_each_online_cpu(cpu) {
 		if (cpu == dying)
 			continue;
-		if (set_cpus_allowed_ptr(current, cpumask_of(cpu)))
-			continue;
-		/* Recheck banks in case CPUs don't all have the same */
-		if (cmci_supported(&banks))
-			cmci_discover(banks);
-	}
 
-	set_cpus_allowed_ptr(current, old);
-	free_cpumask_var(old);
+		if (cpu == smp_processor_id()) {
+			cmci_rediscover_work_func(NULL);
+			continue;
+		}
+
+		work_on_cpu(cpu, cmci_rediscover_work_func, NULL);
+	}
 }
 
 /*
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index b51b2c7..1328fe4 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -995,8 +995,8 @@
 	 */
 	.p2align CONFIG_X86_L1_CACHE_SHIFT
 common_interrupt:
-	ASM_CLAC
 	XCPT_FRAME
+	ASM_CLAC
 	addq $-0x80,(%rsp)		/* Adjust vector to [-256,-1] range */
 	interrupt do_IRQ
 	/* 0(%rsp): old_rsp-ARGOFFSET */
@@ -1135,8 +1135,8 @@
  */
 .macro apicinterrupt num sym do_sym
 ENTRY(\sym)
-	ASM_CLAC
 	INTR_FRAME
+	ASM_CLAC
 	pushq_cfi $~(\num)
 .Lcommon_\sym:
 	interrupt \do_sym
@@ -1190,8 +1190,8 @@
  */
 .macro zeroentry sym do_sym
 ENTRY(\sym)
-	ASM_CLAC
 	INTR_FRAME
+	ASM_CLAC
 	PARAVIRT_ADJUST_EXCEPTION_FRAME
 	pushq_cfi $-1		/* ORIG_RAX: no syscall to restart */
 	subq $ORIG_RAX-R15, %rsp
@@ -1208,8 +1208,8 @@
 
 .macro paranoidzeroentry sym do_sym
 ENTRY(\sym)
-	ASM_CLAC
 	INTR_FRAME
+	ASM_CLAC
 	PARAVIRT_ADJUST_EXCEPTION_FRAME
 	pushq_cfi $-1		/* ORIG_RAX: no syscall to restart */
 	subq $ORIG_RAX-R15, %rsp
@@ -1227,8 +1227,8 @@
 #define INIT_TSS_IST(x) PER_CPU_VAR(init_tss) + (TSS_ist + ((x) - 1) * 8)
 .macro paranoidzeroentry_ist sym do_sym ist
 ENTRY(\sym)
-	ASM_CLAC
 	INTR_FRAME
+	ASM_CLAC
 	PARAVIRT_ADJUST_EXCEPTION_FRAME
 	pushq_cfi $-1		/* ORIG_RAX: no syscall to restart */
 	subq $ORIG_RAX-R15, %rsp
@@ -1247,8 +1247,8 @@
 
 .macro errorentry sym do_sym
 ENTRY(\sym)
-	ASM_CLAC
 	XCPT_FRAME
+	ASM_CLAC
 	PARAVIRT_ADJUST_EXCEPTION_FRAME
 	subq $ORIG_RAX-R15, %rsp
 	CFI_ADJUST_CFA_OFFSET ORIG_RAX-R15
@@ -1266,8 +1266,8 @@
 	/* error code is on the stack already */
 .macro paranoiderrorentry sym do_sym
 ENTRY(\sym)
-	ASM_CLAC
 	XCPT_FRAME
+	ASM_CLAC
 	PARAVIRT_ADJUST_EXCEPTION_FRAME
 	subq $ORIG_RAX-R15, %rsp
 	CFI_ADJUST_CFA_OFFSET ORIG_RAX-R15
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index 957a47a..4dac2f6 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -292,8 +292,8 @@
  *	be using the global pages. 
  *
  *	NOTE! If we are on a 486 we may have no cr4 at all!
- *	Specifically, cr4 exists if and only if CPUID exists,
- *	which in turn exists if and only if EFLAGS.ID exists.
+ *	Specifically, cr4 exists if and only if CPUID exists
+ *	and has flags other than the FPU flag set.
  */
 	movl $X86_EFLAGS_ID,%ecx
 	pushl %ecx
@@ -308,6 +308,11 @@
 	testl %ecx,%eax
 	jz 6f			# No ID flag = no CPUID = no CR4
 
+	movl $1,%eax
+	cpuid
+	andl $~1,%edx		# Ignore CPUID.FPU
+	jz 6f			# No flags or only CPUID.FPU = no CR4
+
 	movl pa(mmu_cr4_features),%eax
 	movl %eax,%cr4
 
diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c
index 7720ff5..efdec7c 100644
--- a/arch/x86/kernel/microcode_amd.c
+++ b/arch/x86/kernel/microcode_amd.c
@@ -8,8 +8,8 @@
  *  Tigran Aivazian <tigran@aivazian.fsnet.co.uk>
  *
  *  Maintainers:
- *  Andreas Herrmann <andreas.herrmann3@amd.com>
- *  Borislav Petkov <borislav.petkov@amd.com>
+ *  Andreas Herrmann <herrmann.der.user@googlemail.com>
+ *  Borislav Petkov <bp@alien8.de>
  *
  *  This driver allows to upgrade microcode on F10h AMD
  *  CPUs and later.
@@ -190,6 +190,7 @@
 #define F1XH_MPB_MAX_SIZE 2048
 #define F14H_MPB_MAX_SIZE 1824
 #define F15H_MPB_MAX_SIZE 4096
+#define F16H_MPB_MAX_SIZE 3458
 
 	switch (c->x86) {
 	case 0x14:
@@ -198,6 +199,9 @@
 	case 0x15:
 		max_size = F15H_MPB_MAX_SIZE;
 		break;
+	case 0x16:
+		max_size = F16H_MPB_MAX_SIZE;
+		break;
 	default:
 		max_size = F1XH_MPB_MAX_SIZE;
 		break;
diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index b00b33a..974b67e 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -22,6 +22,7 @@
 #include <linux/perf_event.h>
 #include <linux/hw_breakpoint.h>
 #include <linux/rcupdate.h>
+#include <linux/module.h>
 
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
@@ -166,6 +167,35 @@
 
 #define FLAG_MASK		FLAG_MASK_32
 
+/*
+ * X86_32 CPUs don't save ss and esp if the CPU is already in kernel mode
+ * when it traps.  The previous stack will be directly underneath the saved
+ * registers, and 'sp/ss' won't even have been saved. Thus the '&regs->sp'.
+ *
+ * Now, if the stack is empty, '&regs->sp' is out of range. In this
+ * case we try to take the previous stack. To always return a non-null
+ * stack pointer we fall back to regs as stack if no previous stack
+ * exists.
+ *
+ * This is valid only for kernel mode traps.
+ */
+unsigned long kernel_stack_pointer(struct pt_regs *regs)
+{
+	unsigned long context = (unsigned long)regs & ~(THREAD_SIZE - 1);
+	unsigned long sp = (unsigned long)&regs->sp;
+	struct thread_info *tinfo;
+
+	if (context == (sp & ~(THREAD_SIZE - 1)))
+		return sp;
+
+	tinfo = (struct thread_info *)context;
+	if (tinfo->previous_esp)
+		return tinfo->previous_esp;
+
+	return (unsigned long)regs;
+}
+EXPORT_SYMBOL_GPL(kernel_stack_pointer);
+
 static unsigned long *pt_regs_access(struct pt_regs *regs, unsigned long regno)
 {
 	BUILD_BUG_ON(offsetof(struct pt_regs, bx) != 0);
@@ -1511,6 +1541,13 @@
 {
 	bool step;
 
+	/*
+	 * We may come here right after calling schedule_user()
+	 * or do_notify_resume(), in which case we can be in RCU
+	 * user mode.
+	 */
+	rcu_user_exit();
+
 	audit_syscall_exit(regs);
 
 	if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index c80a33b..f3e2ec8 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -68,6 +68,8 @@
 #include <asm/mwait.h>
 #include <asm/apic.h>
 #include <asm/io_apic.h>
+#include <asm/i387.h>
+#include <asm/fpu-internal.h>
 #include <asm/setup.h>
 #include <asm/uv/uv.h>
 #include <linux/mc146818rtc.h>
@@ -818,6 +820,9 @@
 
 	per_cpu(cpu_state, cpu) = CPU_UP_PREPARE;
 
+	/* the FPU context is blank, nobody can own it */
+	__cpu_disable_lazy_restore(cpu);
+
 	err = do_boot_cpu(apicid, cpu, tidle);
 	if (err) {
 		pr_debug("do_boot_cpu failed %d\n", err);
diff --git a/arch/x86/kvm/cpuid.h b/arch/x86/kvm/cpuid.h
index a10e460..58fc514 100644
--- a/arch/x86/kvm/cpuid.h
+++ b/arch/x86/kvm/cpuid.h
@@ -24,6 +24,9 @@
 {
 	struct kvm_cpuid_entry2 *best;
 
+	if (!static_cpu_has(X86_FEATURE_XSAVE))
+		return 0;
+
 	best = kvm_find_cpuid_entry(vcpu, 1, 0);
 	return best && (best->ecx & bit(X86_FEATURE_XSAVE));
 }
diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
index 39171cb..bba39bf 100644
--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -426,8 +426,7 @@
 			_ASM_EXTABLE(1b, 3b)				\
 			: "=m" ((ctxt)->eflags), "=&r" (_tmp),		\
 			  "+a" (*rax), "+d" (*rdx), "+qm"(_ex)		\
-			: "i" (EFLAGS_MASK), "m" ((ctxt)->src.val),	\
-			  "a" (*rax), "d" (*rdx));			\
+			: "i" (EFLAGS_MASK), "m" ((ctxt)->src.val));	\
 	} while (0)
 
 /* instruction has only one source operand, destination is implicit (e.g. mul, div, imul, idiv) */
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index ad6b1dd..f858159 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -6549,19 +6549,22 @@
 		}
 	}
 
-	exec_control = vmcs_read32(SECONDARY_VM_EXEC_CONTROL);
 	/* Exposing INVPCID only when PCID is exposed */
 	best = kvm_find_cpuid_entry(vcpu, 0x7, 0);
 	if (vmx_invpcid_supported() &&
 	    best && (best->ebx & bit(X86_FEATURE_INVPCID)) &&
 	    guest_cpuid_has_pcid(vcpu)) {
+		exec_control = vmcs_read32(SECONDARY_VM_EXEC_CONTROL);
 		exec_control |= SECONDARY_EXEC_ENABLE_INVPCID;
 		vmcs_write32(SECONDARY_VM_EXEC_CONTROL,
 			     exec_control);
 	} else {
-		exec_control &= ~SECONDARY_EXEC_ENABLE_INVPCID;
-		vmcs_write32(SECONDARY_VM_EXEC_CONTROL,
-			     exec_control);
+		if (cpu_has_secondary_exec_ctrls()) {
+			exec_control = vmcs_read32(SECONDARY_VM_EXEC_CONTROL);
+			exec_control &= ~SECONDARY_EXEC_ENABLE_INVPCID;
+			vmcs_write32(SECONDARY_VM_EXEC_CONTROL,
+				     exec_control);
+		}
 		if (best)
 			best->ebx &= ~bit(X86_FEATURE_INVPCID);
 	}
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 224a7e7..4f76417 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -5781,6 +5781,9 @@
 	int pending_vec, max_bits, idx;
 	struct desc_ptr dt;
 
+	if (!guest_cpuid_has_xsave(vcpu) && (sregs->cr4 & X86_CR4_OSXSAVE))
+		return -EINVAL;
+
 	dt.size = sregs->idt.limit;
 	dt.address = sregs->idt.base;
 	kvm_x86_ops->set_idt(vcpu, &dt);
diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c
index 0777f04..60f926c 100644
--- a/arch/x86/mm/tlb.c
+++ b/arch/x86/mm/tlb.c
@@ -197,7 +197,7 @@
 	}
 
 	if (end == TLB_FLUSH_ALL || tlb_flushall_shift == -1
-					|| vmflag == VM_HUGETLB) {
+					|| vmflag & VM_HUGETLB) {
 		local_flush_tlb();
 		goto flush_all;
 	}
diff --git a/arch/x86/pci/ce4100.c b/arch/x86/pci/ce4100.c
index 41bd2a2..b914e20 100644
--- a/arch/x86/pci/ce4100.c
+++ b/arch/x86/pci/ce4100.c
@@ -115,6 +115,16 @@
 	reg_read(reg, value);
 }
 
+static void reg_noirq_read(struct sim_dev_reg *reg, u32 *value)
+{
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&pci_config_lock, flags);
+	/* force interrupt pin value to 0 */
+	*value = reg->sim_reg.value & 0xfff00ff;
+	raw_spin_unlock_irqrestore(&pci_config_lock, flags);
+}
+
 static struct sim_dev_reg bus1_fixups[] = {
 	DEFINE_REG(2, 0, 0x10, (16*MB), reg_init, reg_read, reg_write)
 	DEFINE_REG(2, 0, 0x14, (256), reg_init, reg_read, reg_write)
@@ -144,6 +154,7 @@
 	DEFINE_REG(11, 5, 0x10, (64*KB), reg_init, reg_read, reg_write)
 	DEFINE_REG(11, 6, 0x10, (256), reg_init, reg_read, reg_write)
 	DEFINE_REG(11, 7, 0x10, (64*KB), reg_init, reg_read, reg_write)
+	DEFINE_REG(11, 7, 0x3c, 256, reg_init, reg_noirq_read, reg_write)
 	DEFINE_REG(12, 0, 0x10, (128*KB), reg_init, reg_read, reg_write)
 	DEFINE_REG(12, 0, 0x14, (256), reg_init, reg_read, reg_write)
 	DEFINE_REG(12, 1, 0x10, (1024), reg_init, reg_read, reg_write)
@@ -161,8 +172,10 @@
 	DEFINE_REG(16, 0, 0x10, (64*KB), reg_init, reg_read, reg_write)
 	DEFINE_REG(16, 0, 0x14, (64*MB), reg_init, reg_read, reg_write)
 	DEFINE_REG(16, 0, 0x18, (64*MB), reg_init, reg_read, reg_write)
+	DEFINE_REG(16, 0, 0x3c, 256, reg_init, reg_noirq_read, reg_write)
 	DEFINE_REG(17, 0, 0x10, (128*KB), reg_init, reg_read, reg_write)
 	DEFINE_REG(18, 0, 0x10, (1*KB), reg_init, reg_read, reg_write)
+	DEFINE_REG(18, 0, 0x3c, 256, reg_init, reg_noirq_read, reg_write)
 };
 
 static void __init init_sim_regs(void)
diff --git a/arch/x86/platform/ce4100/ce4100.c b/arch/x86/platform/ce4100/ce4100.c
index 4c61b52..92525cb 100644
--- a/arch/x86/platform/ce4100/ce4100.c
+++ b/arch/x86/platform/ce4100/ce4100.c
@@ -21,12 +21,25 @@
 #include <asm/i8259.h>
 #include <asm/io.h>
 #include <asm/io_apic.h>
+#include <asm/emergency-restart.h>
 
 static int ce4100_i8042_detect(void)
 {
 	return 0;
 }
 
+/*
+ * The CE4100 platform has an internal 8051 Microcontroller which is
+ * responsible for signaling to the external Power Management Unit the
+ * intention to reset, reboot or power off the system. This 8051 device has
+ * its command register mapped at I/O port 0xcf9 and the value 0x4 is used
+ * to power off the system.
+ */
+static void ce4100_power_off(void)
+{
+	outb(0x4, 0xcf9);
+}
+
 #ifdef CONFIG_SERIAL_8250
 
 static unsigned int mem_serial_in(struct uart_port *p, int offset)
@@ -139,8 +152,19 @@
 	x86_init.mpparse.find_smp_config = x86_init_noop;
 	x86_init.pci.init = ce4100_pci_init;
 
+	/*
+	 * By default, the reboot method is ACPI which is supported by the
+	 * CE4100 bootloader CEFDK using FADT.ResetReg Address and ResetValue
+	 * the bootloader will however issue a system power off instead of
+	 * reboot. By using BOOT_KBD we ensure proper system reboot as
+	 * expected.
+	 */
+	reboot_type = BOOT_KBD;
+
 #ifdef CONFIG_X86_IO_APIC
 	x86_init.pci.init_irq = sdv_pci_init;
 	x86_init.mpparse.setup_ioapic_ids = setup_ioapic_ids_from_mpc_nocheck;
 #endif
+
+	pm_power_off = ce4100_power_off;
 }
diff --git a/block/blk-exec.c b/block/blk-exec.c
index 8b6dc5b..f71eac3 100644
--- a/block/blk-exec.c
+++ b/block/blk-exec.c
@@ -52,11 +52,17 @@
 			   rq_end_io_fn *done)
 {
 	int where = at_head ? ELEVATOR_INSERT_FRONT : ELEVATOR_INSERT_BACK;
+	bool is_pm_resume;
 
 	WARN_ON(irqs_disabled());
 
 	rq->rq_disk = bd_disk;
 	rq->end_io = done;
+	/*
+	 * need to check this before __blk_run_queue(), because rq can
+	 * be freed before that returns.
+	 */
+	is_pm_resume = rq->cmd_type == REQ_TYPE_PM_RESUME;
 
 	spin_lock_irq(q->queue_lock);
 
@@ -71,7 +77,7 @@
 	__elv_add_request(q, rq, where);
 	__blk_run_queue(q);
 	/* the queue is stopped so it won't be run */
-	if (rq->cmd_type == REQ_TYPE_PM_RESUME)
+	if (is_pm_resume)
 		q->request_fn(q);
 	spin_unlock_irq(q->queue_lock);
 }
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index 119d58d..0300bf6 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -181,6 +181,12 @@
 	  This driver supports ACPI-controlled docking stations and removable
 	  drive bays such as the IBM Ultrabay and the Dell Module Bay.
 
+config ACPI_I2C
+	def_tristate I2C
+	depends on I2C
+	help
+	  ACPI I2C enumeration support.
+
 config ACPI_PROCESSOR
 	tristate "Processor"
 	select THERMAL
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index 82422fe..2a4502b 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -21,9 +21,10 @@
 acpi-y				+= osl.o utils.o reboot.o
 acpi-y				+= nvs.o
 
-# sleep related files
+# Power management related files
 acpi-y				+= wakeup.o
 acpi-y				+= sleep.o
+acpi-$(CONFIG_PM)		+= device_pm.o
 acpi-$(CONFIG_ACPI_SLEEP)	+= proc.o
 
 
@@ -32,10 +33,12 @@
 #
 acpi-y				+= bus.o glue.o
 acpi-y				+= scan.o
+acpi-y				+= resource.o
 acpi-y				+= processor_core.o
 acpi-y				+= ec.o
 acpi-$(CONFIG_ACPI_DOCK)	+= dock.o
 acpi-y				+= pci_root.o pci_link.o pci_irq.o pci_bind.o
+acpi-y				+= acpi_platform.o
 acpi-y				+= power.o
 acpi-y				+= event.o
 acpi-y				+= sysfs.o
@@ -67,6 +70,7 @@
 obj-$(CONFIG_ACPI_EC_DEBUGFS)	+= ec_sys.o
 obj-$(CONFIG_ACPI_CUSTOM_METHOD)+= custom_method.o
 obj-$(CONFIG_ACPI_BGRT)		+= bgrt.o
+obj-$(CONFIG_ACPI_I2C)		+= acpi_i2c.o
 
 # processor has its own "processor." module_param namespace
 processor-y			:= processor_driver.o processor_throttling.o
diff --git a/drivers/acpi/acpi_i2c.c b/drivers/acpi/acpi_i2c.c
new file mode 100644
index 0000000..82045e3
--- /dev/null
+++ b/drivers/acpi/acpi_i2c.c
@@ -0,0 +1,103 @@
+/*
+ * ACPI I2C enumeration support
+ *
+ * Copyright (C) 2012, Intel Corporation
+ * Author: Mika Westerberg <mika.westerberg@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/acpi.h>
+#include <linux/device.h>
+#include <linux/export.h>
+#include <linux/i2c.h>
+#include <linux/ioport.h>
+
+ACPI_MODULE_NAME("i2c");
+
+static int acpi_i2c_add_resource(struct acpi_resource *ares, void *data)
+{
+	struct i2c_board_info *info = data;
+
+	if (ares->type == ACPI_RESOURCE_TYPE_SERIAL_BUS) {
+		struct acpi_resource_i2c_serialbus *sb;
+
+		sb = &ares->data.i2c_serial_bus;
+		if (sb->type == ACPI_RESOURCE_SERIAL_TYPE_I2C) {
+			info->addr = sb->slave_address;
+			if (sb->access_mode == ACPI_I2C_10BIT_MODE)
+				info->flags |= I2C_CLIENT_TEN;
+		}
+	} else if (info->irq < 0) {
+		struct resource r;
+
+		if (acpi_dev_resource_interrupt(ares, 0, &r))
+			info->irq = r.start;
+	}
+
+	/* Tell the ACPI core to skip this resource */
+	return 1;
+}
+
+static acpi_status acpi_i2c_add_device(acpi_handle handle, u32 level,
+				       void *data, void **return_value)
+{
+	struct i2c_adapter *adapter = data;
+	struct list_head resource_list;
+	struct i2c_board_info info;
+	struct acpi_device *adev;
+	int ret;
+
+	if (acpi_bus_get_device(handle, &adev))
+		return AE_OK;
+	if (acpi_bus_get_status(adev) || !adev->status.present)
+		return AE_OK;
+
+	memset(&info, 0, sizeof(info));
+	info.acpi_node.handle = handle;
+	info.irq = -1;
+
+	INIT_LIST_HEAD(&resource_list);
+	ret = acpi_dev_get_resources(adev, &resource_list,
+				     acpi_i2c_add_resource, &info);
+	acpi_dev_free_resource_list(&resource_list);
+
+	if (ret < 0 || !info.addr)
+		return AE_OK;
+
+	strlcpy(info.type, dev_name(&adev->dev), sizeof(info.type));
+	if (!i2c_new_device(adapter, &info)) {
+		dev_err(&adapter->dev,
+			"failed to add I2C device %s from ACPI\n",
+			dev_name(&adev->dev));
+	}
+
+	return AE_OK;
+}
+
+/**
+ * acpi_i2c_register_devices - enumerate I2C slave devices behind adapter
+ * @adapter: pointer to adapter
+ *
+ * Enumerate all I2C slave devices behind this adapter by walking the ACPI
+ * namespace. When a device is found it will be added to the Linux device
+ * model and bound to the corresponding ACPI handle.
+ */
+void acpi_i2c_register_devices(struct i2c_adapter *adapter)
+{
+	acpi_handle handle;
+	acpi_status status;
+
+	handle = ACPI_HANDLE(&adapter->dev);
+	if (!handle)
+		return;
+
+	status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, 1,
+				     acpi_i2c_add_device, NULL,
+				     adapter, NULL);
+	if (ACPI_FAILURE(status))
+		dev_warn(&adapter->dev, "failed to enumerate I2C slaves\n");
+}
+EXPORT_SYMBOL_GPL(acpi_i2c_register_devices);
diff --git a/drivers/acpi/acpi_memhotplug.c b/drivers/acpi/acpi_memhotplug.c
index 24c807f..eb30e5a 100644
--- a/drivers/acpi/acpi_memhotplug.c
+++ b/drivers/acpi/acpi_memhotplug.c
@@ -31,6 +31,7 @@
 #include <linux/types.h>
 #include <linux/memory_hotplug.h>
 #include <linux/slab.h>
+#include <linux/acpi.h>
 #include <acpi/acpi_drivers.h>
 
 #define ACPI_MEMORY_DEVICE_CLASS		"memory"
@@ -78,6 +79,7 @@
 	unsigned short caching;	/* memory cache attribute */
 	unsigned short write_protect;	/* memory read/write attribute */
 	unsigned int enabled:1;
+	unsigned int failed:1;
 };
 
 struct acpi_memory_device {
@@ -86,8 +88,6 @@
 	struct list_head res_list;
 };
 
-static int acpi_hotmem_initialized;
-
 static acpi_status
 acpi_memory_get_resource(struct acpi_resource *resource, void *context)
 {
@@ -125,12 +125,20 @@
 	return AE_OK;
 }
 
+static void
+acpi_memory_free_device_resources(struct acpi_memory_device *mem_device)
+{
+	struct acpi_memory_info *info, *n;
+
+	list_for_each_entry_safe(info, n, &mem_device->res_list, list)
+		kfree(info);
+	INIT_LIST_HEAD(&mem_device->res_list);
+}
+
 static int
 acpi_memory_get_device_resources(struct acpi_memory_device *mem_device)
 {
 	acpi_status status;
-	struct acpi_memory_info *info, *n;
-
 
 	if (!list_empty(&mem_device->res_list))
 		return 0;
@@ -138,9 +146,7 @@
 	status = acpi_walk_resources(mem_device->device->handle, METHOD_NAME__CRS,
 				     acpi_memory_get_resource, mem_device);
 	if (ACPI_FAILURE(status)) {
-		list_for_each_entry_safe(info, n, &mem_device->res_list, list)
-			kfree(info);
-		INIT_LIST_HEAD(&mem_device->res_list);
+		acpi_memory_free_device_resources(mem_device);
 		return -EINVAL;
 	}
 
@@ -170,7 +176,7 @@
 	/* Get the parent device */
 	result = acpi_bus_get_device(phandle, &pdevice);
 	if (result) {
-		printk(KERN_WARNING PREFIX "Cannot get acpi bus device");
+		acpi_handle_warn(phandle, "Cannot get acpi bus device\n");
 		return -EINVAL;
 	}
 
@@ -180,14 +186,14 @@
 	 */
 	result = acpi_bus_add(&device, pdevice, handle, ACPI_BUS_TYPE_DEVICE);
 	if (result) {
-		printk(KERN_WARNING PREFIX "Cannot add acpi bus");
+		acpi_handle_warn(handle, "Cannot add acpi bus\n");
 		return -EINVAL;
 	}
 
       end:
 	*mem_device = acpi_driver_data(device);
 	if (!(*mem_device)) {
-		printk(KERN_ERR "\n driver data not found");
+		dev_err(&device->dev, "driver data not found\n");
 		return -ENODEV;
 	}
 
@@ -224,7 +230,8 @@
 	/* Get the range from the _CRS */
 	result = acpi_memory_get_device_resources(mem_device);
 	if (result) {
-		printk(KERN_ERR PREFIX "get_device_resources failed\n");
+		dev_err(&mem_device->device->dev,
+			"get_device_resources failed\n");
 		mem_device->state = MEMORY_INVALID_STATE;
 		return result;
 	}
@@ -251,13 +258,27 @@
 			node = memory_add_physaddr_to_nid(info->start_addr);
 
 		result = add_memory(node, info->start_addr, info->length);
-		if (result)
+
+		/*
+		 * If the memory block has been used by the kernel, add_memory()
+		 * returns -EEXIST. If add_memory() returns the other error, it
+		 * means that this memory block is not used by the kernel.
+		 */
+		if (result && result != -EEXIST) {
+			info->failed = 1;
 			continue;
-		info->enabled = 1;
+		}
+
+		if (!result)
+			info->enabled = 1;
+		/*
+		 * Add num_enable even if add_memory() returns -EEXIST, so the
+		 * device is bound to this driver.
+		 */
 		num_enabled++;
 	}
 	if (!num_enabled) {
-		printk(KERN_ERR PREFIX "add_memory failed\n");
+		dev_err(&mem_device->device->dev, "add_memory failed\n");
 		mem_device->state = MEMORY_INVALID_STATE;
 		return -EINVAL;
 	}
@@ -272,68 +293,31 @@
 	return 0;
 }
 
-static int acpi_memory_powerdown_device(struct acpi_memory_device *mem_device)
+static int acpi_memory_remove_memory(struct acpi_memory_device *mem_device)
 {
-	acpi_status status;
-	struct acpi_object_list arg_list;
-	union acpi_object arg;
-	unsigned long long current_status;
-
-
-	/* Issue the _EJ0 command */
-	arg_list.count = 1;
-	arg_list.pointer = &arg;
-	arg.type = ACPI_TYPE_INTEGER;
-	arg.integer.value = 1;
-	status = acpi_evaluate_object(mem_device->device->handle,
-				      "_EJ0", &arg_list, NULL);
-	/* Return on _EJ0 failure */
-	if (ACPI_FAILURE(status)) {
-		ACPI_EXCEPTION((AE_INFO, status, "_EJ0 failed"));
-		return -ENODEV;
-	}
-
-	/* Evalute _STA to check if the device is disabled */
-	status = acpi_evaluate_integer(mem_device->device->handle, "_STA",
-				       NULL, &current_status);
-	if (ACPI_FAILURE(status))
-		return -ENODEV;
-
-	/* Check for device status.  Device should be disabled */
-	if (current_status & ACPI_STA_DEVICE_ENABLED)
-		return -EINVAL;
-
-	return 0;
-}
-
-static int acpi_memory_disable_device(struct acpi_memory_device *mem_device)
-{
-	int result;
+	int result = 0;
 	struct acpi_memory_info *info, *n;
 
-
-	/*
-	 * Ask the VM to offline this memory range.
-	 * Note: Assume that this function returns zero on success
-	 */
 	list_for_each_entry_safe(info, n, &mem_device->res_list, list) {
-		if (info->enabled) {
-			result = remove_memory(info->start_addr, info->length);
-			if (result)
-				return result;
-		}
+		if (info->failed)
+			/* The kernel does not use this memory block */
+			continue;
+
+		if (!info->enabled)
+			/*
+			 * The kernel uses this memory block, but it may be not
+			 * managed by us.
+			 */
+			return -EBUSY;
+
+		result = remove_memory(info->start_addr, info->length);
+		if (result)
+			return result;
+
+		list_del(&info->list);
 		kfree(info);
 	}
 
-	/* Power-off and eject the device */
-	result = acpi_memory_powerdown_device(mem_device);
-	if (result) {
-		/* Set the status of the device to invalid */
-		mem_device->state = MEMORY_INVALID_STATE;
-		return result;
-	}
-
-	mem_device->state = MEMORY_POWER_OFF_STATE;
 	return result;
 }
 
@@ -341,6 +325,7 @@
 {
 	struct acpi_memory_device *mem_device;
 	struct acpi_device *device;
+	struct acpi_eject_event *ej_event = NULL;
 	u32 ost_code = ACPI_OST_SC_NON_SPECIFIC_FAILURE; /* default */
 
 	switch (event) {
@@ -353,7 +338,7 @@
 			ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 					  "\nReceived DEVICE CHECK notification for device\n"));
 		if (acpi_memory_get_device(handle, &mem_device)) {
-			printk(KERN_ERR PREFIX "Cannot find driver data\n");
+			acpi_handle_err(handle, "Cannot find driver data\n");
 			break;
 		}
 
@@ -361,7 +346,7 @@
 			break;
 
 		if (acpi_memory_enable_device(mem_device)) {
-			printk(KERN_ERR PREFIX "Cannot enable memory device\n");
+			acpi_handle_err(handle,"Cannot enable memory device\n");
 			break;
 		}
 
@@ -373,40 +358,28 @@
 				  "\nReceived EJECT REQUEST notification for device\n"));
 
 		if (acpi_bus_get_device(handle, &device)) {
-			printk(KERN_ERR PREFIX "Device doesn't exist\n");
+			acpi_handle_err(handle, "Device doesn't exist\n");
 			break;
 		}
 		mem_device = acpi_driver_data(device);
 		if (!mem_device) {
-			printk(KERN_ERR PREFIX "Driver Data is NULL\n");
+			acpi_handle_err(handle, "Driver Data is NULL\n");
 			break;
 		}
 
-		/*
-		 * Currently disabling memory device from kernel mode
-		 * TBD: Can also be disabled from user mode scripts
-		 * TBD: Can also be disabled by Callback registration
-		 *      with generic sysfs driver
-		 */
-		if (acpi_memory_disable_device(mem_device)) {
-			printk(KERN_ERR PREFIX "Disable memory device\n");
-			/*
-			 * If _EJ0 was called but failed, _OST is not
-			 * necessary.
-			 */
-			if (mem_device->state == MEMORY_INVALID_STATE)
-				return;
-
+		ej_event = kmalloc(sizeof(*ej_event), GFP_KERNEL);
+		if (!ej_event) {
+			pr_err(PREFIX "No memory, dropping EJECT\n");
 			break;
 		}
 
-		/*
-		 * TBD: Invoke acpi_bus_remove to cleanup data structures
-		 */
+		ej_event->handle = handle;
+		ej_event->event = ACPI_NOTIFY_EJECT_REQUEST;
+		acpi_os_hotplug_execute(acpi_bus_hot_remove_device,
+					(void *)ej_event);
 
-		/* _EJ0 succeeded; _OST is not necessary */
+		/* eject is performed asynchronously */
 		return;
-
 	default:
 		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 				  "Unsupported event [0x%x]\n", event));
@@ -420,6 +393,15 @@
 	return;
 }
 
+static void acpi_memory_device_free(struct acpi_memory_device *mem_device)
+{
+	if (!mem_device)
+		return;
+
+	acpi_memory_free_device_resources(mem_device);
+	kfree(mem_device);
+}
+
 static int acpi_memory_device_add(struct acpi_device *device)
 {
 	int result;
@@ -449,23 +431,16 @@
 	/* Set the device state */
 	mem_device->state = MEMORY_POWER_ON_STATE;
 
-	printk(KERN_DEBUG "%s \n", acpi_device_name(device));
-
-	/*
-	 * Early boot code has recognized memory area by EFI/E820.
-	 * If DSDT shows these memory devices on boot, hotplug is not necessary
-	 * for them. So, it just returns until completion of this driver's
-	 * start up.
-	 */
-	if (!acpi_hotmem_initialized)
-		return 0;
+	pr_debug("%s\n", acpi_device_name(device));
 
 	if (!acpi_memory_check_device(mem_device)) {
 		/* call add_memory func */
 		result = acpi_memory_enable_device(mem_device);
-		if (result)
-			printk(KERN_ERR PREFIX
+		if (result) {
+			dev_err(&device->dev,
 				"Error in acpi_memory_enable_device\n");
+			acpi_memory_device_free(mem_device);
+		}
 	}
 	return result;
 }
@@ -473,13 +448,18 @@
 static int acpi_memory_device_remove(struct acpi_device *device, int type)
 {
 	struct acpi_memory_device *mem_device = NULL;
-
+	int result;
 
 	if (!device || !acpi_driver_data(device))
 		return -EINVAL;
 
 	mem_device = acpi_driver_data(device);
-	kfree(mem_device);
+
+	result = acpi_memory_remove_memory(mem_device);
+	if (result)
+		return result;
+
+	acpi_memory_device_free(mem_device);
 
 	return 0;
 }
@@ -568,7 +548,6 @@
 		return -ENODEV;
 	}
 
-	acpi_hotmem_initialized = 1;
 	return 0;
 }
 
diff --git a/drivers/acpi/acpi_pad.c b/drivers/acpi/acpi_pad.c
index af4aad6..16fa979 100644
--- a/drivers/acpi/acpi_pad.c
+++ b/drivers/acpi/acpi_pad.c
@@ -286,7 +286,7 @@
 	struct device_attribute *attr, const char *buf, size_t count)
 {
 	unsigned long num;
-	if (strict_strtoul(buf, 0, &num))
+	if (kstrtoul(buf, 0, &num))
 		return -EINVAL;
 	if (num < 1 || num >= 100)
 		return -EINVAL;
@@ -309,7 +309,7 @@
 	struct device_attribute *attr, const char *buf, size_t count)
 {
 	unsigned long num;
-	if (strict_strtoul(buf, 0, &num))
+	if (kstrtoul(buf, 0, &num))
 		return -EINVAL;
 	if (num < 1 || num >= 100)
 		return -EINVAL;
@@ -332,7 +332,7 @@
 	struct device_attribute *attr, const char *buf, size_t count)
 {
 	unsigned long num;
-	if (strict_strtoul(buf, 0, &num))
+	if (kstrtoul(buf, 0, &num))
 		return -EINVAL;
 	mutex_lock(&isolated_cpus_lock);
 	acpi_pad_idle_cpus(num);
@@ -457,7 +457,7 @@
 			dev_name(&device->dev), event, 0);
 		break;
 	default:
-		printk(KERN_WARNING "Unsupported event [0x%x]\n", event);
+		pr_warn("Unsupported event [0x%x]\n", event);
 		break;
 	}
 }
diff --git a/drivers/acpi/acpi_platform.c b/drivers/acpi/acpi_platform.c
new file mode 100644
index 0000000..db129b9
--- /dev/null
+++ b/drivers/acpi/acpi_platform.c
@@ -0,0 +1,104 @@
+/*
+ * ACPI support for platform bus type.
+ *
+ * Copyright (C) 2012, Intel Corporation
+ * Authors: Mika Westerberg <mika.westerberg@linux.intel.com>
+ *          Mathias Nyman <mathias.nyman@linux.intel.com>
+ *          Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/acpi.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include "internal.h"
+
+ACPI_MODULE_NAME("platform");
+
+/**
+ * acpi_create_platform_device - Create platform device for ACPI device node
+ * @adev: ACPI device node to create a platform device for.
+ *
+ * Check if the given @adev can be represented as a platform device and, if
+ * that's the case, create and register a platform device, populate its common
+ * resources and returns a pointer to it.  Otherwise, return %NULL.
+ *
+ * The platform device's name will be taken from the @adev's _HID and _UID.
+ */
+struct platform_device *acpi_create_platform_device(struct acpi_device *adev)
+{
+	struct platform_device *pdev = NULL;
+	struct acpi_device *acpi_parent;
+	struct platform_device_info pdevinfo;
+	struct resource_list_entry *rentry;
+	struct list_head resource_list;
+	struct resource *resources;
+	int count;
+
+	/* If the ACPI node already has a physical device attached, skip it. */
+	if (adev->physical_node_count)
+		return NULL;
+
+	INIT_LIST_HEAD(&resource_list);
+	count = acpi_dev_get_resources(adev, &resource_list, NULL, NULL);
+	if (count <= 0)
+		return NULL;
+
+	resources = kmalloc(count * sizeof(struct resource), GFP_KERNEL);
+	if (!resources) {
+		dev_err(&adev->dev, "No memory for resources\n");
+		acpi_dev_free_resource_list(&resource_list);
+		return NULL;
+	}
+	count = 0;
+	list_for_each_entry(rentry, &resource_list, node)
+		resources[count++] = rentry->res;
+
+	acpi_dev_free_resource_list(&resource_list);
+
+	memset(&pdevinfo, 0, sizeof(pdevinfo));
+	/*
+	 * If the ACPI node has a parent and that parent has a physical device
+	 * attached to it, that physical device should be the parent of the
+	 * platform device we are about to create.
+	 */
+	pdevinfo.parent = NULL;
+	acpi_parent = adev->parent;
+	if (acpi_parent) {
+		struct acpi_device_physical_node *entry;
+		struct list_head *list;
+
+		mutex_lock(&acpi_parent->physical_node_lock);
+		list = &acpi_parent->physical_node_list;
+		if (!list_empty(list)) {
+			entry = list_first_entry(list,
+					struct acpi_device_physical_node,
+					node);
+			pdevinfo.parent = entry->dev;
+		}
+		mutex_unlock(&acpi_parent->physical_node_lock);
+	}
+	pdevinfo.name = dev_name(&adev->dev);
+	pdevinfo.id = -1;
+	pdevinfo.res = resources;
+	pdevinfo.num_res = count;
+	pdevinfo.acpi_node.handle = adev->handle;
+	pdev = platform_device_register_full(&pdevinfo);
+	if (IS_ERR(pdev)) {
+		dev_err(&adev->dev, "platform device creation failed: %ld\n",
+			PTR_ERR(pdev));
+		pdev = NULL;
+	} else {
+		dev_dbg(&adev->dev, "created platform device %s\n",
+			dev_name(&pdev->dev));
+	}
+
+	kfree(resources);
+	return pdev;
+}
diff --git a/drivers/acpi/acpica/Makefile b/drivers/acpi/acpica/Makefile
index 7f1d407..c8bc24b 100644
--- a/drivers/acpi/acpica/Makefile
+++ b/drivers/acpi/acpica/Makefile
@@ -161,3 +161,6 @@
 	utxfinit.o	\
 	utxferror.o	\
 	utxfmutex.o
+
+acpi-$(ACPI_FUTURE_USAGE) += uttrack.o utcache.o utclib.o
+
diff --git a/drivers/acpi/acpica/acdebug.h b/drivers/acpi/acpica/acdebug.h
index 5e8abb0..432a318 100644
--- a/drivers/acpi/acpica/acdebug.h
+++ b/drivers/acpi/acpica/acdebug.h
@@ -44,17 +44,28 @@
 #ifndef __ACDEBUG_H__
 #define __ACDEBUG_H__
 
-#define ACPI_DEBUG_BUFFER_SIZE  4196
+#define ACPI_DEBUG_BUFFER_SIZE  0x4000	/* 16K buffer for return objects */
 
-struct command_info {
+struct acpi_db_command_info {
 	char *name;		/* Command Name */
 	u8 min_args;		/* Minimum arguments required */
 };
 
-struct argument_info {
+struct acpi_db_command_help {
+	u8 line_count;		/* Number of help lines */
+	char *invocation;	/* Command Invocation */
+	char *description;	/* Command Description */
+};
+
+struct acpi_db_argument_info {
 	char *name;		/* Argument Name */
 };
 
+struct acpi_db_execute_walk {
+	u32 count;
+	u32 max_count;
+};
+
 #define PARAM_LIST(pl)                  pl
 #define DBTEST_OUTPUT_LEVEL(lvl)        if (acpi_gbl_db_opt_verbose)
 #define VERBOSE_PRINT(fp)               DBTEST_OUTPUT_LEVEL(lvl) {\
@@ -77,43 +88,19 @@
 /*
  * dbcmds - debug commands and output routines
  */
-acpi_status acpi_db_disassemble_method(char *name);
+struct acpi_namespace_node *acpi_db_convert_to_node(char *in_string);
 
 void acpi_db_display_table_info(char *table_arg);
 
-void acpi_db_unload_acpi_table(char *table_arg, char *instance_arg);
+void acpi_db_display_template(char *buffer_arg);
 
-void
-acpi_db_set_method_breakpoint(char *location,
-			      struct acpi_walk_state *walk_state,
-			      union acpi_parse_object *op);
-
-void acpi_db_set_method_call_breakpoint(union acpi_parse_object *op);
-
-void acpi_db_get_bus_info(void);
-
-void acpi_db_disassemble_aml(char *statements, union acpi_parse_object *op);
-
-void acpi_db_dump_namespace(char *start_arg, char *depth_arg);
-
-void acpi_db_dump_namespace_by_owner(char *owner_arg, char *depth_arg);
+void acpi_db_unload_acpi_table(char *name);
 
 void acpi_db_send_notify(char *name, u32 value);
 
-void acpi_db_set_method_data(char *type_arg, char *index_arg, char *value_arg);
-
-acpi_status
-acpi_db_display_objects(char *obj_type_arg, char *display_count_arg);
-
 void acpi_db_display_interfaces(char *action_arg, char *interface_name_arg);
 
-acpi_status acpi_db_find_name_in_namespace(char *name_arg);
-
-void acpi_db_set_scope(char *name);
-
-ACPI_HW_DEPENDENT_RETURN_OK(acpi_status acpi_db_sleep(char *object_arg))
-
-void acpi_db_find_references(char *object_arg);
+acpi_status acpi_db_sleep(char *object_arg);
 
 void acpi_db_display_locks(void);
 
@@ -121,15 +108,51 @@
 
 ACPI_HW_DEPENDENT_RETURN_VOID(void acpi_db_display_gpes(void))
 
-void acpi_db_check_integrity(void);
+void acpi_db_display_handlers(void);
 
 ACPI_HW_DEPENDENT_RETURN_VOID(void
 			      acpi_db_generate_gpe(char *gpe_arg,
 						   char *block_arg))
 
+/*
+ * dbmethod - control method commands
+ */
+void
+acpi_db_set_method_breakpoint(char *location,
+			      struct acpi_walk_state *walk_state,
+			      union acpi_parse_object *op);
+
+void acpi_db_set_method_call_breakpoint(union acpi_parse_object *op);
+
+void acpi_db_set_method_data(char *type_arg, char *index_arg, char *value_arg);
+
+acpi_status acpi_db_disassemble_method(char *name);
+
+void acpi_db_disassemble_aml(char *statements, union acpi_parse_object *op);
+
+void acpi_db_batch_execute(char *count_arg);
+
+/*
+ * dbnames - namespace commands
+ */
+void acpi_db_set_scope(char *name);
+
+void acpi_db_dump_namespace(char *start_arg, char *depth_arg);
+
+void acpi_db_dump_namespace_by_owner(char *owner_arg, char *depth_arg);
+
+acpi_status acpi_db_find_name_in_namespace(char *name_arg);
+
 void acpi_db_check_predefined_names(void);
 
-void acpi_db_batch_execute(void);
+acpi_status
+acpi_db_display_objects(char *obj_type_arg, char *display_count_arg);
+
+void acpi_db_check_integrity(void);
+
+void acpi_db_find_references(char *object_arg);
+
+void acpi_db_get_bus_info(void);
 
 /*
  * dbdisply - debug display commands
@@ -161,7 +184,8 @@
 /*
  * dbexec - debugger control method execution
  */
-void acpi_db_execute(char *name, char **args, u32 flags);
+void
+acpi_db_execute(char *name, char **args, acpi_object_type * types, u32 flags);
 
 void
 acpi_db_create_execution_threads(char *num_threads_arg,
@@ -175,7 +199,8 @@
  * dbfileio - Debugger file I/O commands
  */
 acpi_object_type
-acpi_db_match_argument(char *user_argument, struct argument_info *arguments);
+acpi_db_match_argument(char *user_argument,
+		       struct acpi_db_argument_info *arguments);
 
 void acpi_db_close_debug_file(void);
 
@@ -208,6 +233,11 @@
 
 void ACPI_SYSTEM_XFACE acpi_db_execute_thread(void *context);
 
+acpi_status acpi_db_user_commands(char prompt, union acpi_parse_object *op);
+
+char *acpi_db_get_next_token(char *string,
+			     char **next, acpi_object_type * return_type);
+
 /*
  * dbstats - Generation and display of ACPI table statistics
  */
diff --git a/drivers/acpi/acpica/acdispat.h b/drivers/acpi/acpica/acdispat.h
index 5935ba6..ed33ebc 100644
--- a/drivers/acpi/acpica/acdispat.h
+++ b/drivers/acpi/acpica/acdispat.h
@@ -309,10 +309,13 @@
 acpi_status
 acpi_ds_obj_stack_pop(u32 pop_count, struct acpi_walk_state *walk_state);
 
-struct acpi_walk_state *acpi_ds_create_walk_state(acpi_owner_id owner_id, union acpi_parse_object
-						  *origin, union acpi_operand_object
-						  *mth_desc, struct acpi_thread_state
-						  *thread);
+struct acpi_walk_state * acpi_ds_create_walk_state(acpi_owner_id owner_id,
+						   union acpi_parse_object
+						   *origin,
+						   union acpi_operand_object
+						   *mth_desc,
+						   struct acpi_thread_state
+						   *thread);
 
 acpi_status
 acpi_ds_init_aml_walk(struct acpi_walk_state *walk_state,
diff --git a/drivers/acpi/acpica/acevents.h b/drivers/acpi/acpica/acevents.h
index c0a43b3..e975c67 100644
--- a/drivers/acpi/acpica/acevents.h
+++ b/drivers/acpi/acpica/acevents.h
@@ -84,9 +84,11 @@
 
 acpi_status acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info);
 
-acpi_status acpi_ev_add_gpe_reference(struct acpi_gpe_event_info *gpe_event_info);
+acpi_status
+acpi_ev_add_gpe_reference(struct acpi_gpe_event_info *gpe_event_info);
 
-acpi_status acpi_ev_remove_gpe_reference(struct acpi_gpe_event_info *gpe_event_info);
+acpi_status
+acpi_ev_remove_gpe_reference(struct acpi_gpe_event_info *gpe_event_info);
 
 struct acpi_gpe_event_info *acpi_ev_get_gpe_event_info(acpi_handle gpe_device,
 						       u32 gpe_number);
diff --git a/drivers/acpi/acpica/acglobal.h b/drivers/acpi/acpica/acglobal.h
index ce79100..64472e4 100644
--- a/drivers/acpi/acpica/acglobal.h
+++ b/drivers/acpi/acpica/acglobal.h
@@ -70,7 +70,7 @@
 
 /*
  * Enable "slack" in the AML interpreter?  Default is FALSE, and the
- * interpreter strictly follows the ACPI specification.  Setting to TRUE
+ * interpreter strictly follows the ACPI specification. Setting to TRUE
  * allows the interpreter to ignore certain errors and/or bad AML constructs.
  *
  * Currently, these features are enabled by this flag:
@@ -155,26 +155,6 @@
 
 /*****************************************************************************
  *
- * Debug support
- *
- ****************************************************************************/
-
-/* Procedure nesting level for debug output */
-
-extern u32 acpi_gbl_nesting_level;
-
-ACPI_EXTERN u32 acpi_gpe_count;
-ACPI_EXTERN u32 acpi_fixed_event_count[ACPI_NUM_FIXED_EVENTS];
-
-/* Support for dynamic control method tracing mechanism */
-
-ACPI_EXTERN u32 acpi_gbl_original_dbg_level;
-ACPI_EXTERN u32 acpi_gbl_original_dbg_layer;
-ACPI_EXTERN u32 acpi_gbl_trace_dbg_level;
-ACPI_EXTERN u32 acpi_gbl_trace_dbg_layer;
-
-/*****************************************************************************
- *
  * ACPI Table globals
  *
  ****************************************************************************/
@@ -259,15 +239,6 @@
  *
  ****************************************************************************/
 
-#ifdef ACPI_DBG_TRACK_ALLOCATIONS
-
-/* Lists for tracking memory allocations */
-
-ACPI_EXTERN struct acpi_memory_list *acpi_gbl_global_list;
-ACPI_EXTERN struct acpi_memory_list *acpi_gbl_ns_node_list;
-ACPI_EXTERN u8 acpi_gbl_display_final_mem_stats;
-#endif
-
 /* Object caches */
 
 ACPI_EXTERN acpi_cache_t *acpi_gbl_namespace_cache;
@@ -326,6 +297,15 @@
 
 #endif
 
+#ifdef ACPI_DBG_TRACK_ALLOCATIONS
+
+/* Lists for tracking memory allocations */
+
+ACPI_EXTERN struct acpi_memory_list *acpi_gbl_global_list;
+ACPI_EXTERN struct acpi_memory_list *acpi_gbl_ns_node_list;
+ACPI_EXTERN u8 acpi_gbl_display_final_mem_stats;
+#endif
+
 /*****************************************************************************
  *
  * Namespace globals
@@ -396,13 +376,35 @@
 #if (!ACPI_REDUCED_HARDWARE)
 
 ACPI_EXTERN u8 acpi_gbl_all_gpes_initialized;
-ACPI_EXTERN ACPI_GBL_EVENT_HANDLER acpi_gbl_global_event_handler;
+ACPI_EXTERN acpi_gbl_event_handler acpi_gbl_global_event_handler;
 ACPI_EXTERN void *acpi_gbl_global_event_handler_context;
 
 #endif				/* !ACPI_REDUCED_HARDWARE */
 
 /*****************************************************************************
  *
+ * Debug support
+ *
+ ****************************************************************************/
+
+/* Procedure nesting level for debug output */
+
+extern u32 acpi_gbl_nesting_level;
+
+/* Event counters */
+
+ACPI_EXTERN u32 acpi_gpe_count;
+ACPI_EXTERN u32 acpi_fixed_event_count[ACPI_NUM_FIXED_EVENTS];
+
+/* Support for dynamic control method tracing mechanism */
+
+ACPI_EXTERN u32 acpi_gbl_original_dbg_level;
+ACPI_EXTERN u32 acpi_gbl_original_dbg_layer;
+ACPI_EXTERN u32 acpi_gbl_trace_dbg_level;
+ACPI_EXTERN u32 acpi_gbl_trace_dbg_layer;
+
+/*****************************************************************************
+ *
  * Debugger globals
  *
  ****************************************************************************/
@@ -426,10 +428,11 @@
 ACPI_EXTERN u8 acpi_gbl_db_opt_ini_methods;
 
 ACPI_EXTERN char *acpi_gbl_db_args[ACPI_DEBUGGER_MAX_ARGS];
-ACPI_EXTERN char acpi_gbl_db_line_buf[80];
-ACPI_EXTERN char acpi_gbl_db_parsed_buf[80];
-ACPI_EXTERN char acpi_gbl_db_scope_buf[40];
-ACPI_EXTERN char acpi_gbl_db_debug_filename[40];
+ACPI_EXTERN acpi_object_type acpi_gbl_db_arg_types[ACPI_DEBUGGER_MAX_ARGS];
+ACPI_EXTERN char acpi_gbl_db_line_buf[ACPI_DB_LINE_BUFFER_SIZE];
+ACPI_EXTERN char acpi_gbl_db_parsed_buf[ACPI_DB_LINE_BUFFER_SIZE];
+ACPI_EXTERN char acpi_gbl_db_scope_buf[80];
+ACPI_EXTERN char acpi_gbl_db_debug_filename[80];
 ACPI_EXTERN u8 acpi_gbl_db_output_to_file;
 ACPI_EXTERN char *acpi_gbl_db_buffer;
 ACPI_EXTERN char *acpi_gbl_db_filename;
diff --git a/drivers/acpi/acpica/aclocal.h b/drivers/acpi/acpica/aclocal.h
index c816ee6..ff8bd00 100644
--- a/drivers/acpi/acpica/aclocal.h
+++ b/drivers/acpi/acpica/aclocal.h
@@ -262,10 +262,10 @@
 };
 
 typedef
-acpi_status(*ACPI_INTERNAL_METHOD) (struct acpi_walk_state * walk_state);
+acpi_status(*acpi_internal_method) (struct acpi_walk_state * walk_state);
 
 /*
- * Bitmapped ACPI types.  Used internally only
+ * Bitmapped ACPI types. Used internally only
  */
 #define ACPI_BTYPE_ANY                  0x00000000
 #define ACPI_BTYPE_INTEGER              0x00000001
@@ -486,8 +486,10 @@
 	struct acpi_namespace_node *gpe_device;
 };
 
-typedef acpi_status(*acpi_gpe_callback) (struct acpi_gpe_xrupt_info *gpe_xrupt_info,
-		struct acpi_gpe_block_info *gpe_block, void *context);
+typedef acpi_status(*acpi_gpe_callback) (struct acpi_gpe_xrupt_info *
+					 gpe_xrupt_info,
+					 struct acpi_gpe_block_info *gpe_block,
+					 void *context);
 
 /* Information about each particular fixed event */
 
@@ -582,7 +584,7 @@
 };
 
 /*
- * Thread state - one per thread across multiple walk states.  Multiple walk
+ * Thread state - one per thread across multiple walk states. Multiple walk
  * states are created when there are nested control methods executing.
  */
 struct acpi_thread_state {
@@ -645,7 +647,7 @@
  *
  ****************************************************************************/
 
-typedef acpi_status(*ACPI_EXECUTE_OP) (struct acpi_walk_state * walk_state);
+typedef acpi_status(*acpi_execute_op) (struct acpi_walk_state * walk_state);
 
 /* Address Range info block */
 
@@ -1031,6 +1033,7 @@
 	acpi_handle method;
 	acpi_handle main_thread_gate;
 	acpi_handle thread_complete_gate;
+	acpi_handle info_gate;
 	acpi_thread_id *threads;
 	u32 num_threads;
 	u32 num_created;
@@ -1041,6 +1044,7 @@
 	u32 num_loops;
 	char pathname[128];
 	char **args;
+	acpi_object_type *types;
 
 	/*
 	 * Arguments to be passed to method for the command
diff --git a/drivers/acpi/acpica/acmacros.h b/drivers/acpi/acpica/acmacros.h
index a7f68c4..5efad99 100644
--- a/drivers/acpi/acpica/acmacros.h
+++ b/drivers/acpi/acpica/acmacros.h
@@ -84,29 +84,29 @@
 
 /* These macros reverse the bytes during the move, converting little-endian to big endian */
 
-			  /* Big Endian      <==        Little Endian */
-			  /*  Hi...Lo                     Lo...Hi     */
+	 /* Big Endian      <==        Little Endian */
+	 /*  Hi...Lo                     Lo...Hi     */
 /* 16-bit source, 16/32/64 destination */
 
 #define ACPI_MOVE_16_TO_16(d, s)        {((  u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[1];\
-					   ((  u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[0];}
+			  ((  u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[0];}
 
 #define ACPI_MOVE_16_TO_32(d, s)        {(*(u32 *)(void *)(d))=0;\
-							   ((u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[1];\
-							   ((u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[0];}
+					  ((u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[1];\
+					  ((u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[0];}
 
 #define ACPI_MOVE_16_TO_64(d, s)        {(*(u64 *)(void *)(d))=0;\
-									 ((u8 *)(void *)(d))[6] = ((u8 *)(void *)(s))[1];\
-									 ((u8 *)(void *)(d))[7] = ((u8 *)(void *)(s))[0];}
+							   ((u8 *)(void *)(d))[6] = ((u8 *)(void *)(s))[1];\
+							   ((u8 *)(void *)(d))[7] = ((u8 *)(void *)(s))[0];}
 
 /* 32-bit source, 16/32/64 destination */
 
 #define ACPI_MOVE_32_TO_16(d, s)        ACPI_MOVE_16_TO_16(d, s)	/* Truncate to 16 */
 
 #define ACPI_MOVE_32_TO_32(d, s)        {((  u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[3];\
-										 ((  u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[2];\
-										 ((  u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[1];\
-										 ((  u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[0];}
+									  ((  u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[2];\
+									  ((  u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[1];\
+									  ((  u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[0];}
 
 #define ACPI_MOVE_32_TO_64(d, s)        {(*(u64 *)(void *)(d))=0;\
 										   ((u8 *)(void *)(d))[4] = ((u8 *)(void *)(s))[3];\
@@ -196,24 +196,12 @@
 #endif
 #endif
 
-/* Macros based on machine integer width */
-
-#if ACPI_MACHINE_WIDTH == 32
-#define ACPI_MOVE_SIZE_TO_16(d, s)       ACPI_MOVE_32_TO_16(d, s)
-
-#elif ACPI_MACHINE_WIDTH == 64
-#define ACPI_MOVE_SIZE_TO_16(d, s)       ACPI_MOVE_64_TO_16(d, s)
-
-#else
-#error unknown ACPI_MACHINE_WIDTH
-#endif
-
 /*
  * Fast power-of-two math macros for non-optimized compilers
  */
-#define _ACPI_DIV(value, power_of2)      ((u32) ((value) >> (power_of2)))
-#define _ACPI_MUL(value, power_of2)      ((u32) ((value) << (power_of2)))
-#define _ACPI_MOD(value, divisor)        ((u32) ((value) & ((divisor) -1)))
+#define _ACPI_DIV(value, power_of2)     ((u32) ((value) >> (power_of2)))
+#define _ACPI_MUL(value, power_of2)     ((u32) ((value) << (power_of2)))
+#define _ACPI_MOD(value, divisor)       ((u32) ((value) & ((divisor) -1)))
 
 #define ACPI_DIV_2(a)                   _ACPI_DIV(a, 1)
 #define ACPI_MUL_2(a)                   _ACPI_MUL(a, 1)
@@ -238,12 +226,12 @@
 /*
  * Rounding macros (Power of two boundaries only)
  */
-#define ACPI_ROUND_DOWN(value, boundary)     (((acpi_size)(value)) & \
-						(~(((acpi_size) boundary)-1)))
+#define ACPI_ROUND_DOWN(value, boundary)    (((acpi_size)(value)) & \
+												(~(((acpi_size) boundary)-1)))
 
-#define ACPI_ROUND_UP(value, boundary)	     ((((acpi_size)(value)) + \
-						(((acpi_size) boundary)-1)) & \
-						(~(((acpi_size) boundary)-1)))
+#define ACPI_ROUND_UP(value, boundary)      ((((acpi_size)(value)) + \
+												(((acpi_size) boundary)-1)) & \
+												(~(((acpi_size) boundary)-1)))
 
 /* Note: sizeof(acpi_size) evaluates to either 4 or 8 (32- vs 64-bit mode) */
 
@@ -264,7 +252,7 @@
 
 #define ACPI_ROUND_UP_TO(value, boundary)   (((value) + ((boundary)-1)) / (boundary))
 
-#define ACPI_IS_MISALIGNED(value)	    (((acpi_size) value) & (sizeof(acpi_size)-1))
+#define ACPI_IS_MISALIGNED(value)           (((acpi_size) value) & (sizeof(acpi_size)-1))
 
 /*
  * Bitmask creation
@@ -355,7 +343,6 @@
  * Ascii error messages can be configured out
  */
 #ifndef ACPI_NO_ERROR_MESSAGES
-
 /*
  * Error reporting. Callers module and line number are inserted by AE_INFO,
  * the plist contains a set of parens to allow variable-length lists.
@@ -375,18 +362,15 @@
 #define ACPI_WARN_PREDEFINED(plist)
 #define ACPI_INFO_PREDEFINED(plist)
 
-#endif		/* ACPI_NO_ERROR_MESSAGES */
+#endif				/* ACPI_NO_ERROR_MESSAGES */
 
 /*
  * Debug macros that are conditionally compiled
  */
 #ifdef ACPI_DEBUG_OUTPUT
-
 /*
  * Function entry tracing
  */
-#ifdef CONFIG_ACPI_DEBUG_FUNC_TRACE
-
 #define ACPI_FUNCTION_TRACE(a)          ACPI_FUNCTION_NAME(a) \
 			  acpi_ut_trace(ACPI_DEBUG_PARAMETERS)
 #define ACPI_FUNCTION_TRACE_PTR(a, b)   ACPI_FUNCTION_NAME(a) \
@@ -464,45 +448,19 @@
 
 #endif				/* ACPI_SIMPLE_RETURN_MACROS */
 
-#else /* !CONFIG_ACPI_DEBUG_FUNC_TRACE */
-
-#define ACPI_FUNCTION_TRACE(a)
-#define ACPI_FUNCTION_TRACE_PTR(a,b)
-#define ACPI_FUNCTION_TRACE_U32(a,b)
-#define ACPI_FUNCTION_TRACE_STR(a,b)
-#define ACPI_FUNCTION_EXIT
-#define ACPI_FUNCTION_STATUS_EXIT(s)
-#define ACPI_FUNCTION_VALUE_EXIT(s)
-#define ACPI_FUNCTION_TRACE(a)
-#define ACPI_FUNCTION_ENTRY()
-
-#define return_VOID                     return
-#define return_ACPI_STATUS(s)           return(s)
-#define return_VALUE(s)                 return(s)
-#define return_UINT8(s)                 return(s)
-#define return_UINT32(s)                return(s)
-#define return_PTR(s)                   return(s)
-
-#endif /* CONFIG_ACPI_DEBUG_FUNC_TRACE */
-
 /* Conditional execution */
 
 #define ACPI_DEBUG_EXEC(a)              a
-#define ACPI_NORMAL_EXEC(a)
-
-#define ACPI_DEBUG_DEFINE(a)            a;
 #define ACPI_DEBUG_ONLY_MEMBERS(a)      a;
 #define _VERBOSE_STRUCTURES
 
-/* Stack and buffer dumping */
+/* Various object display routines for debug */
 
 #define ACPI_DUMP_STACK_ENTRY(a)        acpi_ex_dump_operand((a), 0)
-#define ACPI_DUMP_OPERANDS(a, b, c)	acpi_ex_dump_operands(a, b, c)
-
+#define ACPI_DUMP_OPERANDS(a, b ,c)     acpi_ex_dump_operands(a, b, c)
 #define ACPI_DUMP_ENTRY(a, b)           acpi_ns_dump_entry (a, b)
 #define ACPI_DUMP_PATHNAME(a, b, c, d)  acpi_ns_dump_pathname(a, b, c, d)
-#define ACPI_DUMP_RESOURCE_LIST(a)      acpi_rs_dump_resource_list(a)
-#define ACPI_DUMP_BUFFER(a, b)          acpi_ut_dump_buffer((u8 *) a, b, DB_BYTE_DISPLAY, _COMPONENT)
+#define ACPI_DUMP_BUFFER(a, b)          acpi_ut_debug_dump_buffer((u8 *) a, b, DB_BYTE_DISPLAY, _COMPONENT)
 
 #else
 /*
@@ -510,25 +468,23 @@
  * leaving no executable debug code!
  */
 #define ACPI_DEBUG_EXEC(a)
-#define ACPI_NORMAL_EXEC(a)             a;
-
-#define ACPI_DEBUG_DEFINE(a)		do { } while(0)
-#define ACPI_DEBUG_ONLY_MEMBERS(a)	do { } while(0)
-#define ACPI_FUNCTION_TRACE(a)		do { } while(0)
-#define ACPI_FUNCTION_TRACE_PTR(a, b)	do { } while(0)
-#define ACPI_FUNCTION_TRACE_U32(a, b)	do { } while(0)
-#define ACPI_FUNCTION_TRACE_STR(a, b)	do { } while(0)
-#define ACPI_FUNCTION_EXIT		do { } while(0)
-#define ACPI_FUNCTION_STATUS_EXIT(s)	do { } while(0)
-#define ACPI_FUNCTION_VALUE_EXIT(s)	do { } while(0)
-#define ACPI_FUNCTION_ENTRY()		do { } while(0)
-#define ACPI_DUMP_STACK_ENTRY(a)	do { } while(0)
-#define ACPI_DUMP_OPERANDS(a, b, c)     do { } while(0)
-#define ACPI_DUMP_ENTRY(a, b)		do { } while(0)
-#define ACPI_DUMP_TABLES(a, b)		do { } while(0)
-#define ACPI_DUMP_PATHNAME(a, b, c, d)	do { } while(0)
-#define ACPI_DUMP_RESOURCE_LIST(a)	do { } while(0)
-#define ACPI_DUMP_BUFFER(a, b)		do { } while(0)
+#define ACPI_DEBUG_ONLY_MEMBERS(a)
+#define ACPI_FUNCTION_TRACE(a)
+#define ACPI_FUNCTION_TRACE_PTR(a, b)
+#define ACPI_FUNCTION_TRACE_U32(a, b)
+#define ACPI_FUNCTION_TRACE_STR(a, b)
+#define ACPI_FUNCTION_EXIT
+#define ACPI_FUNCTION_STATUS_EXIT(s)
+#define ACPI_FUNCTION_VALUE_EXIT(s)
+#define ACPI_FUNCTION_ENTRY()
+#define ACPI_DUMP_STACK_ENTRY(a)
+#define ACPI_DUMP_OPERANDS(a, b, c)
+#define ACPI_DUMP_ENTRY(a, b)
+#define ACPI_DUMP_TABLES(a, b)
+#define ACPI_DUMP_PATHNAME(a, b, c, d)
+#define ACPI_DUMP_BUFFER(a, b)
+#define ACPI_DEBUG_PRINT(pl)
+#define ACPI_DEBUG_PRINT_RAW(pl)
 
 #define return_VOID                     return
 #define return_ACPI_STATUS(s)           return(s)
@@ -556,18 +512,6 @@
 #define ACPI_DEBUGGER_EXEC(a)
 #endif
 
-#ifdef ACPI_DEBUG_OUTPUT
-/*
- * 1) Set name to blanks
- * 2) Copy the object name
- */
-#define ACPI_ADD_OBJECT_NAME(a,b)       ACPI_MEMSET (a->common.name, ' ', sizeof (a->common.name));\
-										ACPI_STRNCPY (a->common.name, acpi_gbl_ns_type_names[b], sizeof (a->common.name))
-#else
-
-#define ACPI_ADD_OBJECT_NAME(a,b)
-#endif
-
 /*
  * Memory allocation tracking (DEBUG ONLY)
  */
@@ -578,13 +522,13 @@
 /* Memory allocation */
 
 #ifndef ACPI_ALLOCATE
-#define ACPI_ALLOCATE(a)            acpi_ut_allocate((acpi_size)(a), ACPI_MEM_PARAMETERS)
+#define ACPI_ALLOCATE(a)            acpi_ut_allocate((acpi_size) (a), ACPI_MEM_PARAMETERS)
 #endif
 #ifndef ACPI_ALLOCATE_ZEROED
-#define ACPI_ALLOCATE_ZEROED(a)     acpi_ut_allocate_zeroed((acpi_size)(a), ACPI_MEM_PARAMETERS)
+#define ACPI_ALLOCATE_ZEROED(a)     acpi_ut_allocate_zeroed((acpi_size) (a), ACPI_MEM_PARAMETERS)
 #endif
 #ifndef ACPI_FREE
-#define ACPI_FREE(a)                acpio_os_free(a)
+#define ACPI_FREE(a)                acpi_os_free(a)
 #endif
 #define ACPI_MEM_TRACKING(a)
 
@@ -592,16 +536,25 @@
 
 /* Memory allocation */
 
-#define ACPI_ALLOCATE(a)            acpi_ut_allocate_and_track((acpi_size)(a), ACPI_MEM_PARAMETERS)
-#define ACPI_ALLOCATE_ZEROED(a)     acpi_ut_allocate_zeroed_and_track((acpi_size)(a), ACPI_MEM_PARAMETERS)
+#define ACPI_ALLOCATE(a)            acpi_ut_allocate_and_track((acpi_size) (a), ACPI_MEM_PARAMETERS)
+#define ACPI_ALLOCATE_ZEROED(a)     acpi_ut_allocate_zeroed_and_track((acpi_size) (a), ACPI_MEM_PARAMETERS)
 #define ACPI_FREE(a)                acpi_ut_free_and_track(a, ACPI_MEM_PARAMETERS)
 #define ACPI_MEM_TRACKING(a)        a
 
 #endif				/* ACPI_DBG_TRACK_ALLOCATIONS */
 
-/* Preemption point */
-#ifndef ACPI_PREEMPTION_POINT
-#define ACPI_PREEMPTION_POINT() /* no preemption */
-#endif
+/*
+ * Macros used for ACPICA utilities only
+ */
+
+/* Generate a UUID */
+
+#define ACPI_INIT_UUID(a, b, c, d0, d1, d2, d3, d4, d5, d6, d7) \
+	(a) & 0xFF, ((a) >> 8) & 0xFF, ((a) >> 16) & 0xFF, ((a) >> 24) & 0xFF, \
+	(b) & 0xFF, ((b) >> 8) & 0xFF, \
+	(c) & 0xFF, ((c) >> 8) & 0xFF, \
+	(d0), (d1), (d2), (d3), (d4), (d5), (d6), (d7)
+
+#define ACPI_IS_OCTAL_DIGIT(d)              (((char)(d) >= '0') && ((char)(d) <= '7'))
 
 #endif				/* ACMACROS_H */
diff --git a/drivers/acpi/acpica/acobject.h b/drivers/acpi/acpica/acobject.h
index 364a130..24eb9ea 100644
--- a/drivers/acpi/acpica/acobject.h
+++ b/drivers/acpi/acpica/acobject.h
@@ -1,4 +1,3 @@
-
 /******************************************************************************
  *
  * Name: acobject.h - Definition of union acpi_operand_object  (Internal object only)
@@ -179,7 +178,7 @@
 	union acpi_operand_object *mutex;
 	u8 *aml_start;
 	union {
-		ACPI_INTERNAL_METHOD implementation;
+		acpi_internal_method implementation;
 		union acpi_operand_object *handler;
 	} dispatch;
 
@@ -198,7 +197,7 @@
 
 /******************************************************************************
  *
- * Objects that can be notified.  All share a common notify_info area.
+ * Objects that can be notified. All share a common notify_info area.
  *
  *****************************************************************************/
 
@@ -235,7 +234,7 @@
 
 /******************************************************************************
  *
- * Fields.  All share a common header/info field.
+ * Fields. All share a common header/info field.
  *
  *****************************************************************************/
 
diff --git a/drivers/acpi/acpica/acopcode.h b/drivers/acpi/acpica/acopcode.h
index 9440d05..d786a51 100644
--- a/drivers/acpi/acpica/acopcode.h
+++ b/drivers/acpi/acpica/acopcode.h
@@ -54,7 +54,7 @@
 #define _UNK                        0x6B
 
 /*
- * Reserved ASCII characters.  Do not use any of these for
+ * Reserved ASCII characters. Do not use any of these for
  * internal opcodes, since they are used to differentiate
  * name strings from AML opcodes
  */
@@ -63,7 +63,7 @@
 #define _PFX                        0x6D
 
 /*
- * All AML opcodes and the parse-time arguments for each.  Used by the AML
+ * All AML opcodes and the parse-time arguments for each. Used by the AML
  * parser  Each list is compressed into a 32-bit number and stored in the
  * master opcode table (in psopcode.c).
  */
@@ -193,7 +193,7 @@
 #define ARGP_ZERO_OP                    ARG_NONE
 
 /*
- * All AML opcodes and the runtime arguments for each.  Used by the AML
+ * All AML opcodes and the runtime arguments for each. Used by the AML
  * interpreter  Each list is compressed into a 32-bit number and stored
  * in the master opcode table (in psopcode.c).
  *
diff --git a/drivers/acpi/acpica/acparser.h b/drivers/acpi/acpica/acparser.h
index b725d78..eefcf47 100644
--- a/drivers/acpi/acpica/acparser.h
+++ b/drivers/acpi/acpica/acparser.h
@@ -150,8 +150,7 @@
 
 void
 acpi_ps_pop_scope(struct acpi_parse_state *parser_state,
-		  union acpi_parse_object **op,
-		  u32 * arg_list, u32 * arg_count);
+		  union acpi_parse_object **op, u32 *arg_list, u32 *arg_count);
 
 acpi_status
 acpi_ps_push_scope(struct acpi_parse_state *parser_state,
diff --git a/drivers/acpi/acpica/acpredef.h b/drivers/acpi/acpica/acpredef.h
index 3080c01..9dfa1c8 100644
--- a/drivers/acpi/acpica/acpredef.h
+++ b/drivers/acpi/acpica/acpredef.h
@@ -150,8 +150,7 @@
  * is saved here (rather than in a separate table) in order to minimize the
  * overall size of the stored data.
  */
-static const union acpi_predefined_info predefined_names[] =
-{
+static const union acpi_predefined_info predefined_names[] = {
 	{{"_AC0", 0, ACPI_RTYPE_INTEGER}},
 	{{"_AC1", 0, ACPI_RTYPE_INTEGER}},
 	{{"_AC2", 0, ACPI_RTYPE_INTEGER}},
@@ -538,7 +537,8 @@
 
 	/* Acpi 1.0 defined _WAK with no return value. Later, it was changed to return a package */
 
-	{{"_WAK", 1, ACPI_RTYPE_NONE | ACPI_RTYPE_INTEGER | ACPI_RTYPE_PACKAGE}},
+	{{"_WAK", 1,
+          ACPI_RTYPE_NONE | ACPI_RTYPE_INTEGER | ACPI_RTYPE_PACKAGE}},
 			  {{{ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 2,0}, 0,0}}, /* Fixed-length (2 Int), but is optional */
 
 	/* _WDG/_WED are MS extensions defined by "Windows Instrumentation" */
@@ -551,11 +551,12 @@
 };
 
 #if 0
+
 	/* This is an internally implemented control method, no need to check */
-	{{"_OSI", 1, ACPI_RTYPE_INTEGER}},
+{ {
+"_OSI", 1, ACPI_RTYPE_INTEGER}},
 
 	/* TBD: */
-
 	_PRT - currently ignore reversed entries. attempt to fix here?
 	think about possibly fixing package elements like _BIF, etc.
 #endif
diff --git a/drivers/acpi/acpica/acstruct.h b/drivers/acpi/acpica/acstruct.h
index f196e2c..937e66c 100644
--- a/drivers/acpi/acpica/acstruct.h
+++ b/drivers/acpi/acpica/acstruct.h
@@ -53,7 +53,7 @@
  ****************************************************************************/
 
 /*
- * Walk state - current state of a parse tree walk.  Used for both a leisurely
+ * Walk state - current state of a parse tree walk. Used for both a leisurely
  * stroll through the tree (for whatever reason), and for control method
  * execution.
  */
diff --git a/drivers/acpi/acpica/acutils.h b/drivers/acpi/acpica/acutils.h
index 5035327..b0f5f92 100644
--- a/drivers/acpi/acpica/acutils.h
+++ b/drivers/acpi/acpica/acutils.h
@@ -69,6 +69,22 @@
 extern const char *acpi_gbl_trs_decode[];
 extern const char *acpi_gbl_ttp_decode[];
 extern const char *acpi_gbl_typ_decode[];
+extern const char *acpi_gbl_ppc_decode[];
+extern const char *acpi_gbl_ior_decode[];
+extern const char *acpi_gbl_dts_decode[];
+extern const char *acpi_gbl_ct_decode[];
+extern const char *acpi_gbl_sbt_decode[];
+extern const char *acpi_gbl_am_decode[];
+extern const char *acpi_gbl_sm_decode[];
+extern const char *acpi_gbl_wm_decode[];
+extern const char *acpi_gbl_cph_decode[];
+extern const char *acpi_gbl_cpo_decode[];
+extern const char *acpi_gbl_dp_decode[];
+extern const char *acpi_gbl_ed_decode[];
+extern const char *acpi_gbl_bpb_decode[];
+extern const char *acpi_gbl_sb_decode[];
+extern const char *acpi_gbl_fc_decode[];
+extern const char *acpi_gbl_pt_decode[];
 #endif
 
 /* Types for Resource descriptor entries */
@@ -79,14 +95,14 @@
 #define ACPI_SMALL_VARIABLE_LENGTH      3
 
 typedef
-acpi_status(*acpi_walk_aml_callback) (u8 * aml,
+acpi_status(*acpi_walk_aml_callback) (u8 *aml,
 				      u32 length,
 				      u32 offset,
 				      u8 resource_index, void **context);
 
 typedef
 acpi_status(*acpi_pkg_callback) (u8 object_type,
-				 union acpi_operand_object * source_object,
+				 union acpi_operand_object *source_object,
 				 union acpi_generic_state * state,
 				 void *context);
 
@@ -202,7 +218,9 @@
 #define ACPI_IS_PRINT(c)  (_acpi_ctype[(unsigned char)(c)] & (_ACPI_LO | _ACPI_UP | _ACPI_DI | _ACPI_SP | _ACPI_PU))
 #define ACPI_IS_ALPHA(c)  (_acpi_ctype[(unsigned char)(c)] & (_ACPI_LO | _ACPI_UP))
 
-#endif				/* ACPI_USE_SYSTEM_CLIBRARY */
+#endif				/* !ACPI_USE_SYSTEM_CLIBRARY */
+
+#define ACPI_IS_ASCII(c)  ((c) < 0x80)
 
 /*
  * utcopy - Object construction and conversion interfaces
@@ -210,11 +228,11 @@
 acpi_status
 acpi_ut_build_simple_object(union acpi_operand_object *obj,
 			    union acpi_object *user_obj,
-			    u8 * data_space, u32 * buffer_space_used);
+			    u8 *data_space, u32 *buffer_space_used);
 
 acpi_status
 acpi_ut_build_package_object(union acpi_operand_object *obj,
-			     u8 * buffer, u32 * space_used);
+			     u8 *buffer, u32 *space_used);
 
 acpi_status
 acpi_ut_copy_iobject_to_eobject(union acpi_operand_object *obj,
@@ -287,9 +305,10 @@
 		 const char *function_name,
 		 const char *module_name, u32 component_id, u8 *ptr);
 
-void acpi_ut_dump_buffer(u8 * buffer, u32 count, u32 display, u32 component_id);
+void
+acpi_ut_debug_dump_buffer(u8 *buffer, u32 count, u32 display, u32 component_id);
 
-void acpi_ut_dump_buffer2(u8 * buffer, u32 count, u32 display);
+void acpi_ut_dump_buffer(u8 *buffer, u32 count, u32 display, u32 offset);
 
 void acpi_ut_report_error(char *module_name, u32 line_number);
 
@@ -337,15 +356,19 @@
  */
 acpi_status
 acpi_ut_execute_HID(struct acpi_namespace_node *device_node,
-		    struct acpica_device_id **return_id);
+		    struct acpi_pnp_device_id ** return_id);
 
 acpi_status
 acpi_ut_execute_UID(struct acpi_namespace_node *device_node,
-		    struct acpica_device_id **return_id);
+		    struct acpi_pnp_device_id ** return_id);
+
+acpi_status
+acpi_ut_execute_SUB(struct acpi_namespace_node *device_node,
+		    struct acpi_pnp_device_id **return_id);
 
 acpi_status
 acpi_ut_execute_CID(struct acpi_namespace_node *device_node,
-		    struct acpica_device_id_list **return_cid_list);
+		    struct acpi_pnp_device_id_list ** return_cid_list);
 
 /*
  * utlock - reader/writer locks
@@ -479,15 +502,19 @@
 
 void acpi_ut_strupr(char *src_string);
 
+void acpi_ut_strlwr(char *src_string);
+
+int acpi_ut_stricmp(char *string1, char *string2);
+
 void acpi_ut_print_string(char *string, u8 max_length);
 
 u8 acpi_ut_valid_acpi_name(u32 name);
 
-acpi_name acpi_ut_repair_name(char *name);
+void acpi_ut_repair_name(char *name);
 
 u8 acpi_ut_valid_acpi_char(char character, u32 position);
 
-acpi_status acpi_ut_strtoul64(char *string, u32 base, u64 * ret_integer);
+acpi_status acpi_ut_strtoul64(char *string, u32 base, u64 *ret_integer);
 
 /* Values for Base above (16=Hex, 10=Decimal) */
 
@@ -508,12 +535,12 @@
  * utresrc
  */
 acpi_status
-acpi_ut_walk_aml_resources(u8 * aml,
+acpi_ut_walk_aml_resources(u8 *aml,
 			   acpi_size aml_length,
 			   acpi_walk_aml_callback user_function,
 			   void **context);
 
-acpi_status acpi_ut_validate_resource(void *aml, u8 * return_index);
+acpi_status acpi_ut_validate_resource(void *aml, u8 *return_index);
 
 u32 acpi_ut_get_descriptor_length(void *aml);
 
@@ -524,8 +551,7 @@
 u8 acpi_ut_get_resource_type(void *aml);
 
 acpi_status
-acpi_ut_get_resource_end_tag(union acpi_operand_object *obj_desc,
-			     u8 ** end_tag);
+acpi_ut_get_resource_end_tag(union acpi_operand_object *obj_desc, u8 **end_tag);
 
 /*
  * utmutex - mutex support
diff --git a/drivers/acpi/acpica/amlresrc.h b/drivers/acpi/acpica/amlresrc.h
index af49479..9684496 100644
--- a/drivers/acpi/acpica/amlresrc.h
+++ b/drivers/acpi/acpica/amlresrc.h
@@ -1,4 +1,3 @@
-
 /******************************************************************************
  *
  * Module Name: amlresrc.h - AML resource descriptors
diff --git a/drivers/acpi/acpica/dscontrol.c b/drivers/acpi/acpica/dscontrol.c
index 465f021..57895db 100644
--- a/drivers/acpi/acpica/dscontrol.c
+++ b/drivers/acpi/acpica/dscontrol.c
@@ -280,7 +280,7 @@
 
 			/*
 			 * Get the return value and save as the last result
-			 * value.  This is the only place where walk_state->return_desc
+			 * value. This is the only place where walk_state->return_desc
 			 * is set to anything other than zero!
 			 */
 			walk_state->return_desc = walk_state->operands[0];
diff --git a/drivers/acpi/acpica/dsfield.c b/drivers/acpi/acpica/dsfield.c
index 3da6fd8..b5b904e 100644
--- a/drivers/acpi/acpica/dsfield.c
+++ b/drivers/acpi/acpica/dsfield.c
@@ -277,7 +277,7 @@
  *
  * RETURN:      Status
  *
- * DESCRIPTION: Process all named fields in a field declaration.  Names are
+ * DESCRIPTION: Process all named fields in a field declaration. Names are
  *              entered into the namespace.
  *
  ******************************************************************************/
diff --git a/drivers/acpi/acpica/dsmethod.c b/drivers/acpi/acpica/dsmethod.c
index aa9a5d4..52eb4e0 100644
--- a/drivers/acpi/acpica/dsmethod.c
+++ b/drivers/acpi/acpica/dsmethod.c
@@ -170,7 +170,7 @@
  *
  * RETURN:      Status
  *
- * DESCRIPTION: Prepare a method for execution.  Parses the method if necessary,
+ * DESCRIPTION: Prepare a method for execution. Parses the method if necessary,
  *              increments the thread count, and waits at the method semaphore
  *              for clearance to execute.
  *
@@ -444,7 +444,7 @@
  * RETURN:      Status
  *
  * DESCRIPTION: Restart a method that was preempted by another (nested) method
- *              invocation.  Handle the return value (if any) from the callee.
+ *              invocation. Handle the return value (if any) from the callee.
  *
  ******************************************************************************/
 
@@ -530,7 +530,7 @@
  *
  * RETURN:      None
  *
- * DESCRIPTION: Terminate a control method.  Delete everything that the method
+ * DESCRIPTION: Terminate a control method. Delete everything that the method
  *              created, delete all locals and arguments, and delete the parse
  *              tree if requested.
  *
diff --git a/drivers/acpi/acpica/dsmthdat.c b/drivers/acpi/acpica/dsmthdat.c
index 8d55ceb..9a83b7e 100644
--- a/drivers/acpi/acpica/dsmthdat.c
+++ b/drivers/acpi/acpica/dsmthdat.c
@@ -76,7 +76,7 @@
  * RETURN:      Status
  *
  * DESCRIPTION: Initialize the data structures that hold the method's arguments
- *              and locals.  The data struct is an array of namespace nodes for
+ *              and locals. The data struct is an array of namespace nodes for
  *              each - this allows ref_of and de_ref_of to work properly for these
  *              special data types.
  *
@@ -129,7 +129,7 @@
  *
  * RETURN:      None
  *
- * DESCRIPTION: Delete method locals and arguments.  Arguments are only
+ * DESCRIPTION: Delete method locals and arguments. Arguments are only
  *              deleted if this method was called from another method.
  *
  ******************************************************************************/
@@ -183,7 +183,7 @@
  *
  * RETURN:      Status
  *
- * DESCRIPTION: Initialize arguments for a method.  The parameter list is a list
+ * DESCRIPTION: Initialize arguments for a method. The parameter list is a list
  *              of ACPI operand objects, either null terminated or whose length
  *              is defined by max_param_count.
  *
@@ -401,7 +401,7 @@
 		 * This means that either 1) The expected argument was
 		 * not passed to the method, or 2) A local variable
 		 * was referenced by the method (via the ASL)
-		 * before it was initialized.  Either case is an error.
+		 * before it was initialized. Either case is an error.
 		 */
 
 		/* If slack enabled, init the local_x/arg_x to an Integer of value zero */
@@ -465,7 +465,7 @@
  *
  * RETURN:      None
  *
- * DESCRIPTION: Delete the entry at Opcode:Index.  Inserts
+ * DESCRIPTION: Delete the entry at Opcode:Index. Inserts
  *              a null into the stack slot after the object is deleted.
  *
  ******************************************************************************/
@@ -523,7 +523,7 @@
  *
  * RETURN:      Status
  *
- * DESCRIPTION: Store a value in an Arg or Local.  The obj_desc is installed
+ * DESCRIPTION: Store a value in an Arg or Local. The obj_desc is installed
  *              as the new value for the Arg or Local and the reference count
  *              for obj_desc is incremented.
  *
@@ -566,7 +566,7 @@
 
 	/*
 	 * If the reference count on the object is more than one, we must
-	 * take a copy of the object before we store.  A reference count
+	 * take a copy of the object before we store. A reference count
 	 * of exactly 1 means that the object was just created during the
 	 * evaluation of an expression, and we can safely use it since it
 	 * is not used anywhere else.
diff --git a/drivers/acpi/acpica/dsobject.c b/drivers/acpi/acpica/dsobject.c
index 68592dd..c9f15d3 100644
--- a/drivers/acpi/acpica/dsobject.c
+++ b/drivers/acpi/acpica/dsobject.c
@@ -293,7 +293,7 @@
 
 	/*
 	 * Second arg is the buffer data (optional) byte_list can be either
-	 * individual bytes or a string initializer.  In either case, a
+	 * individual bytes or a string initializer. In either case, a
 	 * byte_list appears in the AML.
 	 */
 	arg = op->common.value.arg;	/* skip first arg */
@@ -568,7 +568,7 @@
 
 	/*
 	 * Because of the execution pass through the non-control-method
-	 * parts of the table, we can arrive here twice.  Only init
+	 * parts of the table, we can arrive here twice. Only init
 	 * the named object node the first time through
 	 */
 	if (acpi_ns_get_attached_object(node)) {
@@ -618,7 +618,7 @@
  * RETURN:      Status
  *
  * DESCRIPTION: Initialize a namespace object from a parser Op and its
- *              associated arguments.  The namespace object is a more compact
+ *              associated arguments. The namespace object is a more compact
  *              representation of the Op and its arguments.
  *
  ******************************************************************************/
diff --git a/drivers/acpi/acpica/dsopcode.c b/drivers/acpi/acpica/dsopcode.c
index aa34d89..0df024e 100644
--- a/drivers/acpi/acpica/dsopcode.c
+++ b/drivers/acpi/acpica/dsopcode.c
@@ -649,7 +649,8 @@
 		    ((op->common.parent->common.aml_opcode != AML_PACKAGE_OP) &&
 		     (op->common.parent->common.aml_opcode !=
 		      AML_VAR_PACKAGE_OP)
-		     && (op->common.parent->common.aml_opcode != AML_NAME_OP))) {
+		     && (op->common.parent->common.aml_opcode !=
+			 AML_NAME_OP))) {
 			walk_state->result_obj = obj_desc;
 		}
 	}
diff --git a/drivers/acpi/acpica/dsutils.c b/drivers/acpi/acpica/dsutils.c
index 73a5447..afeb99f 100644
--- a/drivers/acpi/acpica/dsutils.c
+++ b/drivers/acpi/acpica/dsutils.c
@@ -61,7 +61,7 @@
  *
  * RETURN:      None.
  *
- * DESCRIPTION: Clear and remove a reference on an implicit return value.  Used
+ * DESCRIPTION: Clear and remove a reference on an implicit return value. Used
  *              to delete "stale" return values (if enabled, the return value
  *              from every operator is saved at least momentarily, in case the
  *              parent method exits.)
@@ -107,7 +107,7 @@
  *
  * DESCRIPTION: Implements the optional "implicit return".  We save the result
  *              of every ASL operator and control method invocation in case the
- *              parent method exit.  Before storing a new return value, we
+ *              parent method exit. Before storing a new return value, we
  *              delete the previous return value.
  *
  ******************************************************************************/
@@ -198,7 +198,7 @@
 	 *
 	 * If there is no parent, or the parent is a scope_op, we are executing
 	 * at the method level. An executing method typically has no parent,
-	 * since each method is parsed separately.  A method invoked externally
+	 * since each method is parsed separately. A method invoked externally
 	 * via execute_control_method has a scope_op as the parent.
 	 */
 	if ((!op->common.parent) ||
@@ -223,7 +223,7 @@
 	}
 
 	/*
-	 * Decide what to do with the result based on the parent.  If
+	 * Decide what to do with the result based on the parent. If
 	 * the parent opcode will not use the result, delete the object.
 	 * Otherwise leave it as is, it will be deleted when it is used
 	 * as an operand later.
@@ -266,7 +266,7 @@
 
 		/*
 		 * These opcodes allow term_arg(s) as operands and therefore
-		 * the operands can be method calls.  The result is used.
+		 * the operands can be method calls. The result is used.
 		 */
 		goto result_used;
 
@@ -284,7 +284,7 @@
 			AML_BANK_FIELD_OP)) {
 			/*
 			 * These opcodes allow term_arg(s) as operands and therefore
-			 * the operands can be method calls.  The result is used.
+			 * the operands can be method calls. The result is used.
 			 */
 			goto result_used;
 		}
@@ -329,9 +329,9 @@
  *
  * RETURN:      Status
  *
- * DESCRIPTION: Used after interpretation of an opcode.  If there is an internal
+ * DESCRIPTION: Used after interpretation of an opcode. If there is an internal
  *              result descriptor, check if the parent opcode will actually use
- *              this result.  If not, delete the result now so that it will
+ *              this result. If not, delete the result now so that it will
  *              not become orphaned.
  *
  ******************************************************************************/
@@ -376,7 +376,7 @@
  *
  * RETURN:      Status
  *
- * DESCRIPTION: Resolve all operands to their values.  Used to prepare
+ * DESCRIPTION: Resolve all operands to their values. Used to prepare
  *              arguments to a control method invocation (a call from one
  *              method to another.)
  *
@@ -391,7 +391,7 @@
 
 	/*
 	 * Attempt to resolve each of the valid operands
-	 * Method arguments are passed by reference, not by value.  This means
+	 * Method arguments are passed by reference, not by value. This means
 	 * that the actual objects are passed, not copies of the objects.
 	 */
 	for (i = 0; i < walk_state->num_operands; i++) {
@@ -451,7 +451,7 @@
  * RETURN:      Status
  *
  * DESCRIPTION: Translate a parse tree object that is an argument to an AML
- *              opcode to the equivalent interpreter object.  This may include
+ *              opcode to the equivalent interpreter object. This may include
  *              looking up a name or entering a new name into the internal
  *              namespace.
  *
@@ -496,9 +496,9 @@
 		/*
 		 * Special handling for buffer_field declarations. This is a deferred
 		 * opcode that unfortunately defines the field name as the last
-		 * parameter instead of the first.  We get here when we are performing
+		 * parameter instead of the first. We get here when we are performing
 		 * the deferred execution, so the actual name of the field is already
-		 * in the namespace.  We don't want to attempt to look it up again
+		 * in the namespace. We don't want to attempt to look it up again
 		 * because we may be executing in a different scope than where the
 		 * actual opcode exists.
 		 */
@@ -560,7 +560,8 @@
 					 * indicate this to the interpreter, set the
 					 * object to the root
 					 */
-					obj_desc = ACPI_CAST_PTR(union
+					obj_desc =
+					    ACPI_CAST_PTR(union
 								 acpi_operand_object,
 								 acpi_gbl_root_node);
 					status = AE_OK;
@@ -604,8 +605,8 @@
 			/*
 			 * If the name is null, this means that this is an
 			 * optional result parameter that was not specified
-			 * in the original ASL.  Create a Zero Constant for a
-			 * placeholder.  (Store to a constant is a Noop.)
+			 * in the original ASL. Create a Zero Constant for a
+			 * placeholder. (Store to a constant is a Noop.)
 			 */
 			opcode = AML_ZERO_OP;	/* Has no arguments! */
 
diff --git a/drivers/acpi/acpica/dswexec.c b/drivers/acpi/acpica/dswexec.c
index 642f3c0..5859393 100644
--- a/drivers/acpi/acpica/dswexec.c
+++ b/drivers/acpi/acpica/dswexec.c
@@ -57,7 +57,7 @@
 /*
  * Dispatch table for opcode classes
  */
-static ACPI_EXECUTE_OP acpi_gbl_op_type_dispatch[] = {
+static acpi_execute_op acpi_gbl_op_type_dispatch[] = {
 	acpi_ex_opcode_0A_0T_1R,
 	acpi_ex_opcode_1A_0T_0R,
 	acpi_ex_opcode_1A_0T_1R,
@@ -204,7 +204,7 @@
  * RETURN:      Status
  *
  * DESCRIPTION: Descending callback used during the execution of control
- *              methods.  This is where most operators and operands are
+ *              methods. This is where most operators and operands are
  *              dispatched to the interpreter.
  *
  ****************************************************************************/
@@ -297,7 +297,7 @@
 		if (walk_state->walk_type & ACPI_WALK_METHOD) {
 			/*
 			 * Found a named object declaration during method execution;
-			 * we must enter this object into the namespace.  The created
+			 * we must enter this object into the namespace. The created
 			 * object is temporary and will be deleted upon completion of
 			 * the execution of this method.
 			 *
@@ -348,7 +348,7 @@
  * RETURN:      Status
  *
  * DESCRIPTION: Ascending callback used during the execution of control
- *              methods.  The only thing we really need to do here is to
+ *              methods. The only thing we really need to do here is to
  *              notice the beginning of IF, ELSE, and WHILE blocks.
  *
  ****************************************************************************/
@@ -432,7 +432,7 @@
 		if (ACPI_SUCCESS(status)) {
 			/*
 			 * Dispatch the request to the appropriate interpreter handler
-			 * routine.  There is one routine per opcode "type" based upon the
+			 * routine. There is one routine per opcode "type" based upon the
 			 * number of opcode arguments and return type.
 			 */
 			status =
diff --git a/drivers/acpi/acpica/dswload2.c b/drivers/acpi/acpica/dswload2.c
index 89c0114..3798357 100644
--- a/drivers/acpi/acpica/dswload2.c
+++ b/drivers/acpi/acpica/dswload2.c
@@ -254,7 +254,7 @@
 				    acpi_ut_get_type_name(node->type),
 				    acpi_ut_get_node_name(node)));
 
-			return (AE_AML_OPERAND_TYPE);
+			return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
 		}
 		break;
 
@@ -602,7 +602,7 @@
 							  region_space,
 							  walk_state);
 				if (ACPI_FAILURE(status)) {
-					return (status);
+					return_ACPI_STATUS(status);
 				}
 
 				acpi_ex_exit_interpreter();
diff --git a/drivers/acpi/acpica/dswstate.c b/drivers/acpi/acpica/dswstate.c
index d0e6555..3e65a15 100644
--- a/drivers/acpi/acpica/dswstate.c
+++ b/drivers/acpi/acpica/dswstate.c
@@ -51,8 +51,9 @@
 ACPI_MODULE_NAME("dswstate")
 
   /* Local prototypes */
-static acpi_status acpi_ds_result_stack_push(struct acpi_walk_state *ws);
-static acpi_status acpi_ds_result_stack_pop(struct acpi_walk_state *ws);
+static acpi_status
+acpi_ds_result_stack_push(struct acpi_walk_state *walk_state);
+static acpi_status acpi_ds_result_stack_pop(struct acpi_walk_state *walk_state);
 
 /*******************************************************************************
  *
@@ -347,7 +348,7 @@
  *
  * RETURN:      Status
  *
- * DESCRIPTION: Pop this walk's object stack.  Objects on the stack are NOT
+ * DESCRIPTION: Pop this walk's object stack. Objects on the stack are NOT
  *              deleted by this routine.
  *
  ******************************************************************************/
@@ -491,7 +492,7 @@
  * RETURN:      A walk_state object popped from the thread's stack
  *
  * DESCRIPTION: Remove and return the walkstate object that is at the head of
- *              the walk stack for the given walk list.  NULL indicates that
+ *              the walk stack for the given walk list. NULL indicates that
  *              the list is empty.
  *
  ******************************************************************************/
@@ -531,14 +532,17 @@
  *
  * RETURN:      Pointer to the new walk state.
  *
- * DESCRIPTION: Allocate and initialize a new walk state.  The current walk
+ * DESCRIPTION: Allocate and initialize a new walk state. The current walk
  *              state is set to this new state.
  *
  ******************************************************************************/
 
-struct acpi_walk_state *acpi_ds_create_walk_state(acpi_owner_id owner_id, union acpi_parse_object
-						  *origin, union acpi_operand_object
-						  *method_desc, struct acpi_thread_state
+struct acpi_walk_state *acpi_ds_create_walk_state(acpi_owner_id owner_id,
+						  union acpi_parse_object
+						  *origin,
+						  union acpi_operand_object
+						  *method_desc,
+						  struct acpi_thread_state
 						  *thread)
 {
 	struct acpi_walk_state *walk_state;
@@ -653,7 +657,7 @@
 		/*
 		 * Setup the current scope.
 		 * Find a Named Op that has a namespace node associated with it.
-		 * search upwards from this Op.  Current scope is the first
+		 * search upwards from this Op. Current scope is the first
 		 * Op with a namespace node.
 		 */
 		extra_op = parser_state->start_op;
@@ -704,13 +708,13 @@
 	ACPI_FUNCTION_TRACE_PTR(ds_delete_walk_state, walk_state);
 
 	if (!walk_state) {
-		return;
+		return_VOID;
 	}
 
 	if (walk_state->descriptor_type != ACPI_DESC_TYPE_WALK) {
 		ACPI_ERROR((AE_INFO, "%p is not a valid walk state",
 			    walk_state));
-		return;
+		return_VOID;
 	}
 
 	/* There should not be any open scopes */
diff --git a/drivers/acpi/acpica/evgpe.c b/drivers/acpi/acpica/evgpe.c
index ef0193d..36d1205 100644
--- a/drivers/acpi/acpica/evgpe.c
+++ b/drivers/acpi/acpica/evgpe.c
@@ -89,7 +89,8 @@
 	/* Set the mask bit only if there are references to this GPE */
 
 	if (gpe_event_info->runtime_count) {
-		ACPI_SET_BIT(gpe_register_info->enable_for_run, (u8)register_bit);
+		ACPI_SET_BIT(gpe_register_info->enable_for_run,
+			     (u8)register_bit);
 	}
 
 	return_ACPI_STATUS(AE_OK);
@@ -106,8 +107,7 @@
  * DESCRIPTION: Clear a GPE of stale events and enable it.
  *
  ******************************************************************************/
-acpi_status
-acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info)
+acpi_status acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info)
 {
 	acpi_status status;
 
@@ -131,8 +131,8 @@
 	}
 
 	/* Enable the requested GPE */
-	status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_ENABLE);
 
+	status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_ENABLE);
 	return_ACPI_STATUS(status);
 }
 
@@ -150,7 +150,8 @@
  *
  ******************************************************************************/
 
-acpi_status acpi_ev_add_gpe_reference(struct acpi_gpe_event_info *gpe_event_info)
+acpi_status
+acpi_ev_add_gpe_reference(struct acpi_gpe_event_info *gpe_event_info)
 {
 	acpi_status status = AE_OK;
 
@@ -191,7 +192,8 @@
  *
  ******************************************************************************/
 
-acpi_status acpi_ev_remove_gpe_reference(struct acpi_gpe_event_info *gpe_event_info)
+acpi_status
+acpi_ev_remove_gpe_reference(struct acpi_gpe_event_info *gpe_event_info)
 {
 	acpi_status status = AE_OK;
 
@@ -208,7 +210,8 @@
 
 		status = acpi_ev_update_gpe_enable_mask(gpe_event_info);
 		if (ACPI_SUCCESS(status)) {
-			status = acpi_hw_low_set_gpe(gpe_event_info,
+			status =
+			    acpi_hw_low_set_gpe(gpe_event_info,
 						     ACPI_GPE_DISABLE);
 		}
 
@@ -306,7 +309,8 @@
 
 	/* A Non-NULL gpe_device means this is a GPE Block Device */
 
-	obj_desc = acpi_ns_get_attached_object((struct acpi_namespace_node *)
+	obj_desc =
+	    acpi_ns_get_attached_object((struct acpi_namespace_node *)
 					       gpe_device);
 	if (!obj_desc || !obj_desc->device.gpe_block) {
 		return (NULL);
diff --git a/drivers/acpi/acpica/evgpeblk.c b/drivers/acpi/acpica/evgpeblk.c
index 8cf4c10..1571a61 100644
--- a/drivers/acpi/acpica/evgpeblk.c
+++ b/drivers/acpi/acpica/evgpeblk.c
@@ -486,7 +486,8 @@
 			if (ACPI_FAILURE(status)) {
 				ACPI_EXCEPTION((AE_INFO, status,
 					"Could not enable GPE 0x%02X",
-					gpe_index + gpe_block->block_base_number));
+					gpe_index +
+					gpe_block->block_base_number));
 				continue;
 			}
 
diff --git a/drivers/acpi/acpica/evgpeutil.c b/drivers/acpi/acpica/evgpeutil.c
index cb50dd9..228a0c3 100644
--- a/drivers/acpi/acpica/evgpeutil.c
+++ b/drivers/acpi/acpica/evgpeutil.c
@@ -374,7 +374,8 @@
 				gpe_event_info->dispatch.handler = NULL;
 				gpe_event_info->flags &=
 				    ~ACPI_GPE_DISPATCH_MASK;
-			} else if ((gpe_event_info->
+			} else
+			    if ((gpe_event_info->
 				 flags & ACPI_GPE_DISPATCH_MASK) ==
 				ACPI_GPE_DISPATCH_NOTIFY) {
 
diff --git a/drivers/acpi/acpica/evrgnini.c b/drivers/acpi/acpica/evrgnini.c
index 4c1c826..1474241 100644
--- a/drivers/acpi/acpica/evrgnini.c
+++ b/drivers/acpi/acpica/evrgnini.c
@@ -227,8 +227,7 @@
 
 				/* Install a handler for this PCI root bridge */
 
-				status =
-				    acpi_install_address_space_handler((acpi_handle) pci_root_node, ACPI_ADR_SPACE_PCI_CONFIG, ACPI_DEFAULT_HANDLER, NULL, NULL);
+				status = acpi_install_address_space_handler((acpi_handle) pci_root_node, ACPI_ADR_SPACE_PCI_CONFIG, ACPI_DEFAULT_HANDLER, NULL, NULL);
 				if (ACPI_FAILURE(status)) {
 					if (status == AE_SAME_HANDLER) {
 						/*
@@ -350,8 +349,8 @@
 static u8 acpi_ev_is_pci_root_bridge(struct acpi_namespace_node *node)
 {
 	acpi_status status;
-	struct acpica_device_id *hid;
-	struct acpica_device_id_list *cid;
+	struct acpi_pnp_device_id *hid;
+	struct acpi_pnp_device_id_list *cid;
 	u32 i;
 	u8 match;
 
diff --git a/drivers/acpi/acpica/evxface.c b/drivers/acpi/acpica/evxface.c
index 7587eb6..ae668f3 100644
--- a/drivers/acpi/acpica/evxface.c
+++ b/drivers/acpi/acpica/evxface.c
@@ -398,7 +398,7 @@
  *
  ******************************************************************************/
 acpi_status
-acpi_install_global_event_handler(ACPI_GBL_EVENT_HANDLER handler, void *context)
+acpi_install_global_event_handler(acpi_gbl_event_handler handler, void *context)
 {
 	acpi_status status;
 
diff --git a/drivers/acpi/acpica/evxfgpe.c b/drivers/acpi/acpica/evxfgpe.c
index 87c5f23..3f30e75 100644
--- a/drivers/acpi/acpica/evxfgpe.c
+++ b/drivers/acpi/acpica/evxfgpe.c
@@ -221,7 +221,8 @@
 	if (wake_device == ACPI_ROOT_OBJECT) {
 		device_node = acpi_gbl_root_node;
 	} else {
-		device_node = ACPI_CAST_PTR(struct acpi_namespace_node, wake_device);
+		device_node =
+		    ACPI_CAST_PTR(struct acpi_namespace_node, wake_device);
 	}
 
 	/* Validate WakeDevice is of type Device */
@@ -324,7 +325,8 @@
  *
  ******************************************************************************/
 
-acpi_status acpi_set_gpe_wake_mask(acpi_handle gpe_device, u32 gpe_number, u8 action)
+acpi_status
+acpi_set_gpe_wake_mask(acpi_handle gpe_device, u32 gpe_number, u8 action)
 {
 	acpi_status status = AE_OK;
 	struct acpi_gpe_event_info *gpe_event_info;
@@ -567,7 +569,7 @@
 
 	status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
 	if (ACPI_FAILURE(status)) {
-		return (status);
+		return_ACPI_STATUS(status);
 	}
 
 	node = acpi_ns_validate_handle(gpe_device);
@@ -650,7 +652,7 @@
 
 	status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
 	if (ACPI_FAILURE(status)) {
-		return (status);
+		return_ACPI_STATUS(status);
 	}
 
 	node = acpi_ns_validate_handle(gpe_device);
@@ -694,8 +696,7 @@
  *              the FADT-defined gpe blocks. Otherwise, the GPE block device.
  *
  ******************************************************************************/
-acpi_status
-acpi_get_gpe_device(u32 index, acpi_handle *gpe_device)
+acpi_status acpi_get_gpe_device(u32 index, acpi_handle * gpe_device)
 {
 	struct acpi_gpe_device_info info;
 	acpi_status status;
diff --git a/drivers/acpi/acpica/exconvrt.c b/drivers/acpi/acpica/exconvrt.c
index bfb062e..4492a4e 100644
--- a/drivers/acpi/acpica/exconvrt.c
+++ b/drivers/acpi/acpica/exconvrt.c
@@ -516,8 +516,8 @@
 			string_length--;
 		}
 
-		return_desc = acpi_ut_create_string_object((acpi_size)
-							   string_length);
+		return_desc =
+		    acpi_ut_create_string_object((acpi_size) string_length);
 		if (!return_desc) {
 			return_ACPI_STATUS(AE_NO_MEMORY);
 		}
diff --git a/drivers/acpi/acpica/excreate.c b/drivers/acpi/acpica/excreate.c
index 691d476..66554bc 100644
--- a/drivers/acpi/acpica/excreate.c
+++ b/drivers/acpi/acpica/excreate.c
@@ -78,7 +78,7 @@
 	    (target_node->type == ACPI_TYPE_LOCAL_METHOD_ALIAS)) {
 		/*
 		 * Dereference an existing alias so that we don't create a chain
-		 * of aliases.  With this code, we guarantee that an alias is
+		 * of aliases. With this code, we guarantee that an alias is
 		 * always exactly one level of indirection away from the
 		 * actual aliased name.
 		 */
@@ -90,7 +90,7 @@
 	/*
 	 * For objects that can never change (i.e., the NS node will
 	 * permanently point to the same object), we can simply attach
-	 * the object to the new NS node.  For other objects (such as
+	 * the object to the new NS node. For other objects (such as
 	 * Integers, buffers, etc.), we have to point the Alias node
 	 * to the original Node.
 	 */
@@ -139,7 +139,7 @@
 
 		/*
 		 * The new alias assumes the type of the target, and it points
-		 * to the same object.  The reference count of the object has an
+		 * to the same object. The reference count of the object has an
 		 * additional reference to prevent deletion out from under either the
 		 * target node or the alias Node
 		 */
@@ -243,8 +243,7 @@
 
 	/* Init object and attach to NS node */
 
-	obj_desc->mutex.sync_level =
-	    (u8) walk_state->operands[1]->integer.value;
+	obj_desc->mutex.sync_level = (u8)walk_state->operands[1]->integer.value;
 	obj_desc->mutex.node =
 	    (struct acpi_namespace_node *)walk_state->operands[0];
 
diff --git a/drivers/acpi/acpica/exdebug.c b/drivers/acpi/acpica/exdebug.c
index bc5b9a6..d7c9f51 100644
--- a/drivers/acpi/acpica/exdebug.c
+++ b/drivers/acpi/acpica/exdebug.c
@@ -145,10 +145,10 @@
 	case ACPI_TYPE_BUFFER:
 
 		acpi_os_printf("[0x%.2X]\n", (u32)source_desc->buffer.length);
-		acpi_ut_dump_buffer2(source_desc->buffer.pointer,
-				     (source_desc->buffer.length < 256) ?
-				     source_desc->buffer.length : 256,
-				     DB_BYTE_DISPLAY);
+		acpi_ut_dump_buffer(source_desc->buffer.pointer,
+				    (source_desc->buffer.length < 256) ?
+				    source_desc->buffer.length : 256,
+				    DB_BYTE_DISPLAY, 0);
 		break;
 
 	case ACPI_TYPE_STRING:
@@ -190,7 +190,7 @@
 
 			acpi_os_printf("Table Index 0x%X\n",
 				       source_desc->reference.value);
-			return;
+			return_VOID;
 
 		default:
 			break;
diff --git a/drivers/acpi/acpica/exdump.c b/drivers/acpi/acpica/exdump.c
index 213c081..858b43a 100644
--- a/drivers/acpi/acpica/exdump.c
+++ b/drivers/acpi/acpica/exdump.c
@@ -464,7 +464,8 @@
 
 	ACPI_FUNCTION_NAME(ex_dump_operand)
 
-	    if (!((ACPI_LV_EXEC & acpi_dbg_level)
+	    if (!
+		((ACPI_LV_EXEC & acpi_dbg_level)
 		  && (_COMPONENT & acpi_dbg_layer))) {
 		return;
 	}
@@ -777,7 +778,7 @@
  * PARAMETERS:  title               - Descriptive text
  *              value               - Value to be displayed
  *
- * DESCRIPTION: Object dump output formatting functions.  These functions
+ * DESCRIPTION: Object dump output formatting functions. These functions
  *              reduce the number of format strings required and keeps them
  *              all in one place for easy modification.
  *
@@ -810,7 +811,8 @@
 	ACPI_FUNCTION_ENTRY();
 
 	if (!flags) {
-		if (!((ACPI_LV_OBJECTS & acpi_dbg_level)
+		if (!
+		    ((ACPI_LV_OBJECTS & acpi_dbg_level)
 		      && (_COMPONENT & acpi_dbg_layer))) {
 			return;
 		}
@@ -940,10 +942,11 @@
 		acpi_os_printf("[Buffer] Length %.2X = ",
 			       obj_desc->buffer.length);
 		if (obj_desc->buffer.length) {
-			acpi_ut_dump_buffer(ACPI_CAST_PTR
-					    (u8, obj_desc->buffer.pointer),
-					    obj_desc->buffer.length,
-					    DB_DWORD_DISPLAY, _COMPONENT);
+			acpi_ut_debug_dump_buffer(ACPI_CAST_PTR
+						  (u8,
+						   obj_desc->buffer.pointer),
+						  obj_desc->buffer.length,
+						  DB_DWORD_DISPLAY, _COMPONENT);
 		} else {
 			acpi_os_printf("\n");
 		}
@@ -996,7 +999,8 @@
 	}
 
 	if (!flags) {
-		if (!((ACPI_LV_OBJECTS & acpi_dbg_level)
+		if (!
+		    ((ACPI_LV_OBJECTS & acpi_dbg_level)
 		      && (_COMPONENT & acpi_dbg_layer))) {
 			return_VOID;
 		}
diff --git a/drivers/acpi/acpica/exfield.c b/drivers/acpi/acpica/exfield.c
index dc092f5..ebc55fb 100644
--- a/drivers/acpi/acpica/exfield.c
+++ b/drivers/acpi/acpica/exfield.c
@@ -59,7 +59,7 @@
  *
  * RETURN:      Status
  *
- * DESCRIPTION: Read from a named field.  Returns either an Integer or a
+ * DESCRIPTION: Read from a named field. Returns either an Integer or a
  *              Buffer, depending on the size of the field.
  *
  ******************************************************************************/
@@ -149,7 +149,7 @@
 	 * Allocate a buffer for the contents of the field.
 	 *
 	 * If the field is larger than the current integer width, create
-	 * a BUFFER to hold it.  Otherwise, use an INTEGER.  This allows
+	 * a BUFFER to hold it. Otherwise, use an INTEGER. This allows
 	 * the use of arithmetic operators on the returned value if the
 	 * field size is equal or smaller than an Integer.
 	 *
diff --git a/drivers/acpi/acpica/exfldio.c b/drivers/acpi/acpica/exfldio.c
index a778415..aa2ccfb 100644
--- a/drivers/acpi/acpica/exfldio.c
+++ b/drivers/acpi/acpica/exfldio.c
@@ -54,8 +54,7 @@
 /* Local prototypes */
 static acpi_status
 acpi_ex_field_datum_io(union acpi_operand_object *obj_desc,
-		       u32 field_datum_byte_offset,
-		       u64 *value, u32 read_write);
+		       u32 field_datum_byte_offset, u64 *value, u32 read_write);
 
 static u8
 acpi_ex_register_overflow(union acpi_operand_object *obj_desc, u64 value);
@@ -155,7 +154,7 @@
 #endif
 
 	/*
-	 * Validate the request.  The entire request from the byte offset for a
+	 * Validate the request. The entire request from the byte offset for a
 	 * length of one field datum (access width) must fit within the region.
 	 * (Region length is specified in bytes)
 	 */
@@ -183,7 +182,7 @@
 		    obj_desc->common_field.access_byte_width) {
 			/*
 			 * This is the case where the access_type (acc_word, etc.) is wider
-			 * than the region itself.  For example, a region of length one
+			 * than the region itself. For example, a region of length one
 			 * byte, and a field with Dword access specified.
 			 */
 			ACPI_ERROR((AE_INFO,
@@ -321,7 +320,7 @@
  *
  * DESCRIPTION: Check if a value is out of range of the field being written.
  *              Used to check if the values written to Index and Bank registers
- *              are out of range.  Normally, the value is simply truncated
+ *              are out of range. Normally, the value is simply truncated
  *              to fit the field, but this case is most likely a serious
  *              coding error in the ASL.
  *
@@ -370,7 +369,7 @@
  *
  * RETURN:      Status
  *
- * DESCRIPTION: Read or Write a single datum of a field.  The field_type is
+ * DESCRIPTION: Read or Write a single datum of a field. The field_type is
  *              demultiplexed here to handle the different types of fields
  *              (buffer_field, region_field, index_field, bank_field)
  *
@@ -860,7 +859,7 @@
 	    ACPI_ROUND_BITS_UP_TO_BYTES(obj_desc->common_field.bit_length);
 	/*
 	 * We must have a buffer that is at least as long as the field
-	 * we are writing to.  This is because individual fields are
+	 * we are writing to. This is because individual fields are
 	 * indivisible and partial writes are not supported -- as per
 	 * the ACPI specification.
 	 */
@@ -875,7 +874,7 @@
 
 		/*
 		 * Copy the original data to the new buffer, starting
-		 * at Byte zero.  All unused (upper) bytes of the
+		 * at Byte zero. All unused (upper) bytes of the
 		 * buffer will be 0.
 		 */
 		ACPI_MEMCPY((char *)new_buffer, (char *)buffer, buffer_length);
diff --git a/drivers/acpi/acpica/exmisc.c b/drivers/acpi/acpica/exmisc.c
index 271c0c5..8405870 100644
--- a/drivers/acpi/acpica/exmisc.c
+++ b/drivers/acpi/acpica/exmisc.c
@@ -1,4 +1,3 @@
-
 /******************************************************************************
  *
  * Module Name: exmisc - ACPI AML (p-code) execution - specific opcodes
@@ -254,7 +253,7 @@
 	ACPI_FUNCTION_TRACE(ex_do_concatenate);
 
 	/*
-	 * Convert the second operand if necessary.  The first operand
+	 * Convert the second operand if necessary. The first operand
 	 * determines the type of the second operand, (See the Data Types
 	 * section of the ACPI specification.)  Both object types are
 	 * guaranteed to be either Integer/String/Buffer by the operand
@@ -573,7 +572,7 @@
 	ACPI_FUNCTION_TRACE(ex_do_logical_op);
 
 	/*
-	 * Convert the second operand if necessary.  The first operand
+	 * Convert the second operand if necessary. The first operand
 	 * determines the type of the second operand, (See the Data Types
 	 * section of the ACPI 3.0+ specification.)  Both object types are
 	 * guaranteed to be either Integer/String/Buffer by the operand
diff --git a/drivers/acpi/acpica/exmutex.c b/drivers/acpi/acpica/exmutex.c
index bcceda5..d1f449d 100644
--- a/drivers/acpi/acpica/exmutex.c
+++ b/drivers/acpi/acpica/exmutex.c
@@ -1,4 +1,3 @@
-
 /******************************************************************************
  *
  * Module Name: exmutex - ASL Mutex Acquire/Release functions
@@ -305,7 +304,7 @@
 	ACPI_FUNCTION_TRACE(ex_release_mutex_object);
 
 	if (obj_desc->mutex.acquisition_depth == 0) {
-		return (AE_NOT_ACQUIRED);
+		return_ACPI_STATUS(AE_NOT_ACQUIRED);
 	}
 
 	/* Match multiple Acquires with multiple Releases */
@@ -462,7 +461,7 @@
 	union acpi_operand_object *next = thread->acquired_mutex_list;
 	union acpi_operand_object *obj_desc;
 
-	ACPI_FUNCTION_ENTRY();
+	ACPI_FUNCTION_NAME(ex_release_all_mutexes);
 
 	/* Traverse the list of owned mutexes, releasing each one */
 
@@ -474,6 +473,10 @@
 		obj_desc->mutex.next = NULL;
 		obj_desc->mutex.acquisition_depth = 0;
 
+		ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
+				  "Force-releasing held mutex: %p\n",
+				  obj_desc));
+
 		/* Release the mutex, special case for Global Lock */
 
 		if (obj_desc == acpi_gbl_global_lock_mutex) {
diff --git a/drivers/acpi/acpica/exnames.c b/drivers/acpi/acpica/exnames.c
index fcc75fa..2ff578a 100644
--- a/drivers/acpi/acpica/exnames.c
+++ b/drivers/acpi/acpica/exnames.c
@@ -1,4 +1,3 @@
-
 /******************************************************************************
  *
  * Module Name: exnames - interpreter/scanner name load/execute
@@ -53,8 +52,7 @@
 /* Local prototypes */
 static char *acpi_ex_allocate_name_string(u32 prefix_count, u32 num_name_segs);
 
-static acpi_status
-acpi_ex_name_segment(u8 ** in_aml_address, char *name_string);
+static acpi_status acpi_ex_name_segment(u8 **in_aml_address, char *name_string);
 
 /*******************************************************************************
  *
@@ -64,7 +62,7 @@
  *                                    (-1)==root,  0==none
  *              num_name_segs       - count of 4-character name segments
  *
- * RETURN:      A pointer to the allocated string segment.  This segment must
+ * RETURN:      A pointer to the allocated string segment. This segment must
  *              be deleted by the caller.
  *
  * DESCRIPTION: Allocate a buffer for a name string. Ensure allocated name
@@ -178,7 +176,8 @@
 
 	ACPI_DEBUG_PRINT((ACPI_DB_LOAD, "Bytes from stream:\n"));
 
-	for (index = 0; (index < ACPI_NAME_SIZE)
+	for (index = 0;
+	     (index < ACPI_NAME_SIZE)
 	     && (acpi_ut_valid_acpi_char(*aml_address, 0)); index++) {
 		char_buf[index] = *aml_address++;
 		ACPI_DEBUG_PRINT((ACPI_DB_LOAD, "%c\n", char_buf[index]));
diff --git a/drivers/acpi/acpica/exoparg1.c b/drivers/acpi/acpica/exoparg1.c
index 9ba8c73..bbf01e9 100644
--- a/drivers/acpi/acpica/exoparg1.c
+++ b/drivers/acpi/acpica/exoparg1.c
@@ -1,4 +1,3 @@
-
 /******************************************************************************
  *
  * Module Name: exoparg1 - AML execution - opcodes with 1 argument
@@ -606,7 +605,7 @@
 		}
 
 		/*
-		 * Set result to ONES (TRUE) if Value == 0.  Note:
+		 * Set result to ONES (TRUE) if Value == 0. Note:
 		 * return_desc->Integer.Value is initially == 0 (FALSE) from above.
 		 */
 		if (!operand[0]->integer.value) {
@@ -618,7 +617,7 @@
 	case AML_INCREMENT_OP:	/* Increment (Operand)  */
 
 		/*
-		 * Create a new integer.  Can't just get the base integer and
+		 * Create a new integer. Can't just get the base integer and
 		 * increment it because it may be an Arg or Field.
 		 */
 		return_desc = acpi_ut_create_internal_object(ACPI_TYPE_INTEGER);
@@ -686,7 +685,7 @@
 
 		/*
 		 * Note: The operand is not resolved at this point because we want to
-		 * get the associated object, not its value.  For example, we don't
+		 * get the associated object, not its value. For example, we don't
 		 * want to resolve a field_unit to its value, we want the actual
 		 * field_unit object.
 		 */
@@ -727,7 +726,7 @@
 
 		/*
 		 * The type of the base object must be integer, buffer, string, or
-		 * package.  All others are not supported.
+		 * package. All others are not supported.
 		 *
 		 * NOTE: Integer is not specifically supported by the ACPI spec,
 		 * but is supported implicitly via implicit operand conversion.
@@ -965,7 +964,7 @@
 				case ACPI_TYPE_PACKAGE:
 
 					/*
-					 * Return the referenced element of the package.  We must
+					 * Return the referenced element of the package. We must
 					 * add another reference to the referenced object, however.
 					 */
 					return_desc =
diff --git a/drivers/acpi/acpica/exoparg2.c b/drivers/acpi/acpica/exoparg2.c
index 879e8a2..ee5634a 100644
--- a/drivers/acpi/acpica/exoparg2.c
+++ b/drivers/acpi/acpica/exoparg2.c
@@ -123,7 +123,7 @@
 		/*
 		 * Dispatch the notify to the appropriate handler
 		 * NOTE: the request is queued for execution after this method
-		 * completes.  The notify handlers are NOT invoked synchronously
+		 * completes. The notify handlers are NOT invoked synchronously
 		 * from this thread -- because handlers may in turn run other
 		 * control methods.
 		 */
diff --git a/drivers/acpi/acpica/exoparg3.c b/drivers/acpi/acpica/exoparg3.c
index 71fcc65..2c89b46 100644
--- a/drivers/acpi/acpica/exoparg3.c
+++ b/drivers/acpi/acpica/exoparg3.c
@@ -1,4 +1,3 @@
-
 /******************************************************************************
  *
  * Module Name: exoparg3 - AML execution - opcodes with 3 arguments
@@ -158,7 +157,7 @@
 	case AML_MID_OP:	/* Mid (Source[0], Index[1], Length[2], Result[3]) */
 
 		/*
-		 * Create the return object.  The Source operand is guaranteed to be
+		 * Create the return object. The Source operand is guaranteed to be
 		 * either a String or a Buffer, so just use its type.
 		 */
 		return_desc = acpi_ut_create_internal_object((operand[0])->
diff --git a/drivers/acpi/acpica/exoparg6.c b/drivers/acpi/acpica/exoparg6.c
index 0786b86..3e08695 100644
--- a/drivers/acpi/acpica/exoparg6.c
+++ b/drivers/acpi/acpica/exoparg6.c
@@ -1,4 +1,3 @@
-
 /******************************************************************************
  *
  * Module Name: exoparg6 - AML execution - opcodes with 6 arguments
@@ -198,7 +197,7 @@
 		return (FALSE);
 	}
 
-	return logical_result;
+	return (logical_result);
 }
 
 /*******************************************************************************
@@ -269,7 +268,7 @@
 		 * and the next should be examined.
 		 *
 		 * Upon finding a match, the loop will terminate via "break" at
-		 * the bottom.  If it terminates "normally", match_value will be
+		 * the bottom. If it terminates "normally", match_value will be
 		 * ACPI_UINT64_MAX (Ones) (its initial value) indicating that no
 		 * match was found.
 		 */
diff --git a/drivers/acpi/acpica/exprep.c b/drivers/acpi/acpica/exprep.c
index 81eca60..ba9db4d 100644
--- a/drivers/acpi/acpica/exprep.c
+++ b/drivers/acpi/acpica/exprep.c
@@ -1,4 +1,3 @@
-
 /******************************************************************************
  *
  * Module Name: exprep - ACPI AML (p-code) execution - field prep utilities
@@ -78,8 +77,8 @@
  *              any_acc keyword.
  *
  * NOTE: Need to have the region_length in order to check for boundary
- *       conditions (end-of-region).  However, the region_length is a deferred
- *       operation.  Therefore, to complete this implementation, the generation
+ *       conditions (end-of-region). However, the region_length is a deferred
+ *       operation. Therefore, to complete this implementation, the generation
  *       of this access width must be deferred until the region length has
  *       been evaluated.
  *
@@ -308,7 +307,7 @@
  * RETURN:      Status
  *
  * DESCRIPTION: Initialize the areas of the field object that are common
- *              to the various types of fields.  Note: This is very "sensitive"
+ *              to the various types of fields. Note: This is very "sensitive"
  *              code because we are solving the general case for field
  *              alignment.
  *
@@ -336,13 +335,13 @@
 	obj_desc->common_field.bit_length = field_bit_length;
 
 	/*
-	 * Decode the access type so we can compute offsets.  The access type gives
+	 * Decode the access type so we can compute offsets. The access type gives
 	 * two pieces of information - the width of each field access and the
 	 * necessary byte_alignment (address granularity) of the access.
 	 *
 	 * For any_acc, the access_bit_width is the largest width that is both
 	 * necessary and possible in an attempt to access the whole field in one
-	 * I/O operation.  However, for any_acc, the byte_alignment is always one
+	 * I/O operation. However, for any_acc, the byte_alignment is always one
 	 * byte.
 	 *
 	 * For all Buffer Fields, the byte_alignment is always one byte.
@@ -363,7 +362,7 @@
 
 	/*
 	 * base_byte_offset is the address of the start of the field within the
-	 * region.  It is the byte address of the first *datum* (field-width data
+	 * region. It is the byte address of the first *datum* (field-width data
 	 * unit) of the field. (i.e., the first datum that contains at least the
 	 * first *bit* of the field.)
 	 *
diff --git a/drivers/acpi/acpica/exregion.c b/drivers/acpi/acpica/exregion.c
index 1f1ce0c..1db2c0b 100644
--- a/drivers/acpi/acpica/exregion.c
+++ b/drivers/acpi/acpica/exregion.c
@@ -1,4 +1,3 @@
-
 /******************************************************************************
  *
  * Module Name: exregion - ACPI default op_region (address space) handlers
@@ -202,7 +201,7 @@
 	 * Perform the memory read or write
 	 *
 	 * Note: For machines that do not support non-aligned transfers, the target
-	 * address was checked for alignment above.  We do not attempt to break the
+	 * address was checked for alignment above. We do not attempt to break the
 	 * transfer up into smaller (byte-size) chunks because the AML specifically
 	 * asked for a transfer width that the hardware may require.
 	 */
diff --git a/drivers/acpi/acpica/exresnte.c b/drivers/acpi/acpica/exresnte.c
index fa50e77..6239956 100644
--- a/drivers/acpi/acpica/exresnte.c
+++ b/drivers/acpi/acpica/exresnte.c
@@ -1,4 +1,3 @@
-
 /******************************************************************************
  *
  * Module Name: exresnte - AML Interpreter object resolution
@@ -58,8 +57,8 @@
  * PARAMETERS:  object_ptr      - Pointer to a location that contains
  *                                a pointer to a NS node, and will receive a
  *                                pointer to the resolved object.
- *              walk_state      - Current state.  Valid only if executing AML
- *                                code.  NULL if simply resolving an object
+ *              walk_state      - Current state. Valid only if executing AML
+ *                                code. NULL if simply resolving an object
  *
  * RETURN:      Status
  *
@@ -67,7 +66,7 @@
  *
  * Note: for some of the data types, the pointer attached to the Node
  * can be either a pointer to an actual internal object or a pointer into the
- * AML stream itself.  These types are currently:
+ * AML stream itself. These types are currently:
  *
  *      ACPI_TYPE_INTEGER
  *      ACPI_TYPE_STRING
@@ -89,7 +88,7 @@
 	ACPI_FUNCTION_TRACE(ex_resolve_node_to_value);
 
 	/*
-	 * The stack pointer points to a struct acpi_namespace_node (Node).  Get the
+	 * The stack pointer points to a struct acpi_namespace_node (Node). Get the
 	 * object that is attached to the Node.
 	 */
 	node = *object_ptr;
diff --git a/drivers/acpi/acpica/exresolv.c b/drivers/acpi/acpica/exresolv.c
index bbf40ac..cc176b2 100644
--- a/drivers/acpi/acpica/exresolv.c
+++ b/drivers/acpi/acpica/exresolv.c
@@ -1,4 +1,3 @@
-
 /******************************************************************************
  *
  * Module Name: exresolv - AML Interpreter object resolution
@@ -327,7 +326,7 @@
  *
  * RETURN:      Status
  *
- * DESCRIPTION: Return the base object and type.  Traverse a reference list if
+ * DESCRIPTION: Return the base object and type. Traverse a reference list if
  *              necessary to get to the base object.
  *
  ******************************************************************************/
diff --git a/drivers/acpi/acpica/exresop.c b/drivers/acpi/acpica/exresop.c
index f232fba..b9ebff2 100644
--- a/drivers/acpi/acpica/exresop.c
+++ b/drivers/acpi/acpica/exresop.c
@@ -1,4 +1,3 @@
-
 /******************************************************************************
  *
  * Module Name: exresop - AML Interpreter operand/object resolution
@@ -87,7 +86,7 @@
 	if (type_needed == ACPI_TYPE_LOCAL_REFERENCE) {
 		/*
 		 * Allow the AML "Constant" opcodes (Zero, One, etc.) to be reference
-		 * objects and thus allow them to be targets.  (As per the ACPI
+		 * objects and thus allow them to be targets. (As per the ACPI
 		 * specification, a store to a constant is a noop.)
 		 */
 		if ((this_type == ACPI_TYPE_INTEGER) &&
@@ -337,7 +336,8 @@
 			if ((opcode == AML_STORE_OP) &&
 			    ((*stack_ptr)->common.type ==
 			     ACPI_TYPE_LOCAL_REFERENCE)
-			    && ((*stack_ptr)->reference.class == ACPI_REFCLASS_INDEX)) {
+			    && ((*stack_ptr)->reference.class ==
+				ACPI_REFCLASS_INDEX)) {
 				goto next_operand;
 			}
 			break;
@@ -638,7 +638,7 @@
 				if (acpi_gbl_enable_interpreter_slack) {
 					/*
 					 * Enable original behavior of Store(), allowing any and all
-					 * objects as the source operand.  The ACPI spec does not
+					 * objects as the source operand. The ACPI spec does not
 					 * allow this, however.
 					 */
 					break;
diff --git a/drivers/acpi/acpica/exstore.c b/drivers/acpi/acpica/exstore.c
index 5fffe7a..90431f1 100644
--- a/drivers/acpi/acpica/exstore.c
+++ b/drivers/acpi/acpica/exstore.c
@@ -374,7 +374,7 @@
  *              with the input value.
  *
  *              When storing into an object the data is converted to the
- *              target object type then stored in the object.  This means
+ *              target object type then stored in the object. This means
  *              that the target object type (for an initialized target) will
  *              not be changed by a store operation.
  *
@@ -491,7 +491,7 @@
 				  acpi_ut_get_object_type_name(source_desc),
 				  source_desc, node));
 
-		/* No conversions for all other types.  Just attach the source object */
+		/* No conversions for all other types. Just attach the source object */
 
 		status = acpi_ns_attach_object(node, source_desc,
 					       source_desc->common.type);
diff --git a/drivers/acpi/acpica/exstoren.c b/drivers/acpi/acpica/exstoren.c
index b35bed5..87153bb 100644
--- a/drivers/acpi/acpica/exstoren.c
+++ b/drivers/acpi/acpica/exstoren.c
@@ -1,4 +1,3 @@
-
 /******************************************************************************
  *
  * Module Name: exstoren - AML Interpreter object store support,
@@ -61,7 +60,7 @@
  *
  * RETURN:      Status, resolved object in source_desc_ptr.
  *
- * DESCRIPTION: Resolve an object.  If the object is a reference, dereference
+ * DESCRIPTION: Resolve an object. If the object is a reference, dereference
  *              it and return the actual object in the source_desc_ptr.
  *
  ******************************************************************************/
@@ -93,7 +92,7 @@
 
 		/*
 		 * Stores into a Field/Region or into a Integer/Buffer/String
-		 * are all essentially the same.  This case handles the
+		 * are all essentially the same. This case handles the
 		 * "interchangeable" types Integer, String, and Buffer.
 		 */
 		if (source_desc->common.type == ACPI_TYPE_LOCAL_REFERENCE) {
@@ -167,7 +166,7 @@
  *
  * RETURN:      Status
  *
- * DESCRIPTION: "Store" an object to another object.  This may include
+ * DESCRIPTION: "Store" an object to another object. This may include
  *              converting the source type to the target type (implicit
  *              conversion), and a copy of the value of the source to
  *              the target.
@@ -178,14 +177,14 @@
  *              with the input value.
  *
  *              When storing into an object the data is converted to the
- *              target object type then stored in the object.  This means
+ *              target object type then stored in the object. This means
  *              that the target object type (for an initialized target) will
  *              not be changed by a store operation.
  *
  *              This module allows destination types of Number, String,
  *              Buffer, and Package.
  *
- *              Assumes parameters are already validated.  NOTE: source_desc
+ *              Assumes parameters are already validated. NOTE: source_desc
  *              resolution (from a reference object) must be performed by
  *              the caller if necessary.
  *
diff --git a/drivers/acpi/acpica/exstorob.c b/drivers/acpi/acpica/exstorob.c
index 53c2484..b5f339c 100644
--- a/drivers/acpi/acpica/exstorob.c
+++ b/drivers/acpi/acpica/exstorob.c
@@ -1,4 +1,3 @@
-
 /******************************************************************************
  *
  * Module Name: exstorob - AML Interpreter object store support, store to object
@@ -108,7 +107,7 @@
 #ifdef ACPI_OBSOLETE_BEHAVIOR
 		/*
 		 * NOTE: ACPI versions up to 3.0 specified that the buffer must be
-		 * truncated if the string is smaller than the buffer.  However, "other"
+		 * truncated if the string is smaller than the buffer. However, "other"
 		 * implementations of ACPI never did this and thus became the defacto
 		 * standard. ACPI 3.0A changes this behavior such that the buffer
 		 * is no longer truncated.
@@ -117,7 +116,7 @@
 		/*
 		 * OBSOLETE BEHAVIOR:
 		 * If the original source was a string, we must truncate the buffer,
-		 * according to the ACPI spec.  Integer-to-Buffer and Buffer-to-Buffer
+		 * according to the ACPI spec. Integer-to-Buffer and Buffer-to-Buffer
 		 * copy must not truncate the original buffer.
 		 */
 		if (original_src_type == ACPI_TYPE_STRING) {
diff --git a/drivers/acpi/acpica/exsystem.c b/drivers/acpi/acpica/exsystem.c
index b760641..c8a0ad5 100644
--- a/drivers/acpi/acpica/exsystem.c
+++ b/drivers/acpi/acpica/exsystem.c
@@ -1,4 +1,3 @@
-
 /******************************************************************************
  *
  * Module Name: exsystem - Interface to OS services
@@ -59,7 +58,7 @@
  * RETURN:      Status
  *
  * DESCRIPTION: Implements a semaphore wait with a check to see if the
- *              semaphore is available immediately.  If it is not, the
+ *              semaphore is available immediately. If it is not, the
  *              interpreter is released before waiting.
  *
  ******************************************************************************/
@@ -104,7 +103,7 @@
  * RETURN:      Status
  *
  * DESCRIPTION: Implements a mutex wait with a check to see if the
- *              mutex is available immediately.  If it is not, the
+ *              mutex is available immediately. If it is not, the
  *              interpreter is released before waiting.
  *
  ******************************************************************************/
@@ -152,7 +151,7 @@
  * DESCRIPTION: Suspend running thread for specified amount of time.
  *              Note: ACPI specification requires that Stall() does not
  *              relinquish the processor, and delays longer than 100 usec
- *              should use Sleep() instead.  We allow stalls up to 255 usec
+ *              should use Sleep() instead. We allow stalls up to 255 usec
  *              for compatibility with other interpreters and existing BIOSs.
  *
  ******************************************************************************/
@@ -254,7 +253,7 @@
  * RETURN:      Status
  *
  * DESCRIPTION: Provides an access point to perform synchronization operations
- *              within the AML.  This operation is a request to wait for an
+ *              within the AML. This operation is a request to wait for an
  *              event.
  *
  ******************************************************************************/
diff --git a/drivers/acpi/acpica/exutils.c b/drivers/acpi/acpica/exutils.c
index d1ab791..264d22d 100644
--- a/drivers/acpi/acpica/exutils.c
+++ b/drivers/acpi/acpica/exutils.c
@@ -1,4 +1,3 @@
-
 /******************************************************************************
  *
  * Module Name: exutils - interpreter/scanner utilities
@@ -45,12 +44,12 @@
 /*
  * DEFINE_AML_GLOBALS is tested in amlcode.h
  * to determine whether certain global names should be "defined" or only
- * "declared" in the current compilation.  This enhances maintainability
+ * "declared" in the current compilation. This enhances maintainability
  * by enabling a single header file to embody all knowledge of the names
  * in question.
  *
  * Exactly one module of any executable should #define DEFINE_GLOBALS
- * before #including the header files which use this convention.  The
+ * before #including the header files which use this convention. The
  * names in question will be defined and initialized in that module,
  * and declared as extern in all other modules which #include those
  * header files.
diff --git a/drivers/acpi/acpica/hwacpi.c b/drivers/acpi/acpica/hwacpi.c
index a1e71d0..90a9aea 100644
--- a/drivers/acpi/acpica/hwacpi.c
+++ b/drivers/acpi/acpica/hwacpi.c
@@ -1,4 +1,3 @@
-
 /******************************************************************************
  *
  * Module Name: hwacpi - ACPI Hardware Initialization/Mode Interface
@@ -136,7 +135,7 @@
  *
  * RETURN:      SYS_MODE_ACPI or SYS_MODE_LEGACY
  *
- * DESCRIPTION: Return current operating state of system.  Determined by
+ * DESCRIPTION: Return current operating state of system. Determined by
  *              querying the SCI_EN bit.
  *
  ******************************************************************************/
diff --git a/drivers/acpi/acpica/hwgpe.c b/drivers/acpi/acpica/hwgpe.c
index db40765..6456004 100644
--- a/drivers/acpi/acpica/hwgpe.c
+++ b/drivers/acpi/acpica/hwgpe.c
@@ -1,4 +1,3 @@
-
 /******************************************************************************
  *
  * Module Name: hwgpe - Low level GPE enable/disable/clear functions
@@ -339,7 +338,8 @@
 
 acpi_status
 acpi_hw_enable_runtime_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
-				 struct acpi_gpe_block_info *gpe_block, void *context)
+				 struct acpi_gpe_block_info * gpe_block,
+				 void *context)
 {
 	u32 i;
 	acpi_status status;
diff --git a/drivers/acpi/acpica/hwpci.c b/drivers/acpi/acpica/hwpci.c
index 1455ddc..65bc345 100644
--- a/drivers/acpi/acpica/hwpci.c
+++ b/drivers/acpi/acpica/hwpci.c
@@ -259,7 +259,7 @@
 		status = acpi_hw_get_pci_device_info(pci_id, info->device,
 						     &bus_number, &is_bridge);
 		if (ACPI_FAILURE(status)) {
-			return_ACPI_STATUS(status);
+			return (status);
 		}
 
 		info = info->next;
@@ -271,7 +271,7 @@
 			  pci_id->segment, pci_id->bus, pci_id->device,
 			  pci_id->function, status, bus_number, is_bridge));
 
-	return_ACPI_STATUS(AE_OK);
+	return (AE_OK);
 }
 
 /*******************************************************************************
diff --git a/drivers/acpi/acpica/hwregs.c b/drivers/acpi/acpica/hwregs.c
index 4af6d20..f4e5750 100644
--- a/drivers/acpi/acpica/hwregs.c
+++ b/drivers/acpi/acpica/hwregs.c
@@ -1,4 +1,3 @@
-
 /*******************************************************************************
  *
  * Module Name: hwregs - Read/write access functions for the various ACPI
diff --git a/drivers/acpi/acpica/hwtimer.c b/drivers/acpi/acpica/hwtimer.c
index b6411f1..bfdce22 100644
--- a/drivers/acpi/acpica/hwtimer.c
+++ b/drivers/acpi/acpica/hwtimer.c
@@ -1,4 +1,3 @@
-
 /******************************************************************************
  *
  * Name: hwtimer.c - ACPI Power Management Timer Interface
@@ -101,8 +100,7 @@
 		return_ACPI_STATUS(AE_BAD_PARAMETER);
 	}
 
-	status =
-	    acpi_hw_read(ticks, &acpi_gbl_FADT.xpm_timer_block);
+	status = acpi_hw_read(ticks, &acpi_gbl_FADT.xpm_timer_block);
 
 	return_ACPI_STATUS(status);
 }
@@ -129,7 +127,7 @@
  *              a versatile and accurate timer.
  *
  *              Note that this function accommodates only a single timer
- *              rollover.  Thus for 24-bit timers, this function should only
+ *              rollover. Thus for 24-bit timers, this function should only
  *              be used for calculating durations less than ~4.6 seconds
  *              (~20 minutes for 32-bit timers) -- calculations below:
  *
diff --git a/drivers/acpi/acpica/hwvalid.c b/drivers/acpi/acpica/hwvalid.c
index c99d546..b6aae58 100644
--- a/drivers/acpi/acpica/hwvalid.c
+++ b/drivers/acpi/acpica/hwvalid.c
@@ -1,4 +1,3 @@
-
 /******************************************************************************
  *
  * Module Name: hwvalid - I/O request validation
diff --git a/drivers/acpi/acpica/hwxface.c b/drivers/acpi/acpica/hwxface.c
index 7bfd649..05a154c 100644
--- a/drivers/acpi/acpica/hwxface.c
+++ b/drivers/acpi/acpica/hwxface.c
@@ -1,4 +1,3 @@
-
 /******************************************************************************
  *
  * Module Name: hwxface - Public ACPICA hardware interfaces
diff --git a/drivers/acpi/acpica/hwxfsleep.c b/drivers/acpi/acpica/hwxfsleep.c
index 0ff1ece..ae443fe2 100644
--- a/drivers/acpi/acpica/hwxfsleep.c
+++ b/drivers/acpi/acpica/hwxfsleep.c
@@ -49,8 +49,7 @@
 ACPI_MODULE_NAME("hwxfsleep")
 
 /* Local prototypes */
-static acpi_status
-acpi_hw_sleep_dispatch(u8 sleep_state, u32 function_id);
+static acpi_status acpi_hw_sleep_dispatch(u8 sleep_state, u32 function_id);
 
 /*
  * Dispatch table used to efficiently branch to the various sleep
@@ -234,8 +233,7 @@
  *              function.
  *
  ******************************************************************************/
-static acpi_status
-acpi_hw_sleep_dispatch(u8 sleep_state, u32 function_id)
+static acpi_status acpi_hw_sleep_dispatch(u8 sleep_state, u32 function_id)
 {
 	acpi_status status;
 	struct acpi_sleep_functions *sleep_functions =
@@ -369,8 +367,7 @@
 		return_ACPI_STATUS(AE_AML_OPERAND_VALUE);
 	}
 
-	status =
-	    acpi_hw_sleep_dispatch(sleep_state, ACPI_SLEEP_FUNCTION_ID);
+	status = acpi_hw_sleep_dispatch(sleep_state, ACPI_SLEEP_FUNCTION_ID);
 	return_ACPI_STATUS(status);
 }
 
@@ -396,8 +393,7 @@
 	ACPI_FUNCTION_TRACE(acpi_leave_sleep_state_prep);
 
 	status =
-	    acpi_hw_sleep_dispatch(sleep_state,
-				   ACPI_WAKE_PREP_FUNCTION_ID);
+	    acpi_hw_sleep_dispatch(sleep_state, ACPI_WAKE_PREP_FUNCTION_ID);
 	return_ACPI_STATUS(status);
 }
 
diff --git a/drivers/acpi/acpica/nsaccess.c b/drivers/acpi/acpica/nsaccess.c
index 23db53c..d70eaf3 100644
--- a/drivers/acpi/acpica/nsaccess.c
+++ b/drivers/acpi/acpica/nsaccess.c
@@ -110,11 +110,11 @@
 		status = acpi_ns_lookup(NULL, init_val->name, init_val->type,
 					ACPI_IMODE_LOAD_PASS2,
 					ACPI_NS_NO_UPSEARCH, NULL, &new_node);
-
-		if (ACPI_FAILURE(status) || (!new_node)) {	/* Must be on same line for code converter */
+		if (ACPI_FAILURE(status)) {
 			ACPI_EXCEPTION((AE_INFO, status,
 					"Could not create predefined name %s",
 					init_val->name));
+			continue;
 		}
 
 		/*
@@ -179,8 +179,7 @@
 
 				/* Build an object around the static string */
 
-				obj_desc->string.length =
-				    (u32) ACPI_STRLEN(val);
+				obj_desc->string.length = (u32)ACPI_STRLEN(val);
 				obj_desc->string.pointer = val;
 				obj_desc->common.flags |= AOPOBJ_STATIC_POINTER;
 				break;
diff --git a/drivers/acpi/acpica/nsalloc.c b/drivers/acpi/acpica/nsalloc.c
index ac389e5..15143c4 100644
--- a/drivers/acpi/acpica/nsalloc.c
+++ b/drivers/acpi/acpica/nsalloc.c
@@ -332,7 +332,7 @@
  *
  * RETURN:      None.
  *
- * DESCRIPTION: Delete a subtree of the namespace.  This includes all objects
+ * DESCRIPTION: Delete a subtree of the namespace. This includes all objects
  *              stored within the subtree.
  *
  ******************************************************************************/
@@ -418,7 +418,7 @@
  * RETURN:      Status
  *
  * DESCRIPTION: Delete entries within the namespace that are owned by a
- *              specific ID.  Used to delete entire ACPI tables.  All
+ *              specific ID. Used to delete entire ACPI tables. All
  *              reference counts are updated.
  *
  * MUTEX:       Locks namespace during deletion walk.
diff --git a/drivers/acpi/acpica/nsdump.c b/drivers/acpi/acpica/nsdump.c
index 2526aaf..924b3c7 100644
--- a/drivers/acpi/acpica/nsdump.c
+++ b/drivers/acpi/acpica/nsdump.c
@@ -209,14 +209,6 @@
 				      "Invalid ACPI Object Type 0x%08X", type));
 		}
 
-		if (!acpi_ut_valid_acpi_name(this_node->name.integer)) {
-			this_node->name.integer =
-			    acpi_ut_repair_name(this_node->name.ascii);
-
-			ACPI_WARNING((AE_INFO, "Invalid ACPI Name %08X",
-				      this_node->name.integer));
-		}
-
 		acpi_os_printf("%4.4s", acpi_ut_get_node_name(this_node));
 	}
 
@@ -700,7 +692,7 @@
  *
  * PARAMETERS:  search_base         - Root of subtree to be dumped, or
  *                                    NS_ALL to dump the entire namespace
- *              max_depth           - Maximum depth of dump.  Use INT_MAX
+ *              max_depth           - Maximum depth of dump. Use INT_MAX
  *                                    for an effectively unlimited depth.
  *
  * RETURN:      None
diff --git a/drivers/acpi/acpica/nsinit.c b/drivers/acpi/acpica/nsinit.c
index 95ffe8d..4328e2a 100644
--- a/drivers/acpi/acpica/nsinit.c
+++ b/drivers/acpi/acpica/nsinit.c
@@ -96,8 +96,8 @@
 	/* Walk entire namespace from the supplied root */
 
 	status = acpi_walk_namespace(ACPI_TYPE_ANY, ACPI_ROOT_OBJECT,
-				     ACPI_UINT32_MAX, acpi_ns_init_one_object, NULL,
-				     &info, NULL);
+				     ACPI_UINT32_MAX, acpi_ns_init_one_object,
+				     NULL, &info, NULL);
 	if (ACPI_FAILURE(status)) {
 		ACPI_EXCEPTION((AE_INFO, status, "During WalkNamespace"));
 	}
diff --git a/drivers/acpi/acpica/nsload.c b/drivers/acpi/acpica/nsload.c
index 76935ff..911f991 100644
--- a/drivers/acpi/acpica/nsload.c
+++ b/drivers/acpi/acpica/nsload.c
@@ -80,8 +80,8 @@
 
 	/*
 	 * Parse the table and load the namespace with all named
-	 * objects found within.  Control methods are NOT parsed
-	 * at this time.  In fact, the control methods cannot be
+	 * objects found within. Control methods are NOT parsed
+	 * at this time. In fact, the control methods cannot be
 	 * parsed until the entire namespace is loaded, because
 	 * if a control method makes a forward reference (call)
 	 * to another control method, we can't continue parsing
@@ -122,7 +122,7 @@
 	}
 
 	/*
-	 * Now we can parse the control methods.  We always parse
+	 * Now we can parse the control methods. We always parse
 	 * them here for a sanity check, and if configured for
 	 * just-in-time parsing, we delete the control method
 	 * parse trees.
@@ -166,7 +166,7 @@
 	}
 
 	/*
-	 * Load the namespace.  The DSDT is required,
+	 * Load the namespace. The DSDT is required,
 	 * but the SSDT and PSDT tables are optional.
 	 */
 	status = acpi_ns_load_table_by_type(ACPI_TABLE_ID_DSDT);
@@ -283,7 +283,7 @@
  *  RETURN:         Status
  *
  *  DESCRIPTION:    Shrinks the namespace, typically in response to an undocking
- *                  event.  Deletes an entire subtree starting from (and
+ *                  event. Deletes an entire subtree starting from (and
  *                  including) the given handle.
  *
  ******************************************************************************/
diff --git a/drivers/acpi/acpica/nsnames.c b/drivers/acpi/acpica/nsnames.c
index 96e0eb6..55a175e 100644
--- a/drivers/acpi/acpica/nsnames.c
+++ b/drivers/acpi/acpica/nsnames.c
@@ -195,7 +195,7 @@
 			ACPI_ERROR((AE_INFO,
 				    "Invalid Namespace Node (%p) while traversing namespace",
 				    next_node));
-			return 0;
+			return (0);
 		}
 		size += ACPI_PATH_SEGMENT_LENGTH;
 		next_node = next_node->parent;
diff --git a/drivers/acpi/acpica/nsobject.c b/drivers/acpi/acpica/nsobject.c
index d6c9a3c..e69f7fa 100644
--- a/drivers/acpi/acpica/nsobject.c
+++ b/drivers/acpi/acpica/nsobject.c
@@ -61,7 +61,7 @@
  * RETURN:      Status
  *
  * DESCRIPTION: Record the given object as the value associated with the
- *              name whose acpi_handle is passed.  If Object is NULL
+ *              name whose acpi_handle is passed. If Object is NULL
  *              and Type is ACPI_TYPE_ANY, set the name as having no value.
  *              Note: Future may require that the Node->Flags field be passed
  *              as a parameter.
@@ -133,7 +133,7 @@
 		 ((struct acpi_namespace_node *)object)->object) {
 		/*
 		 * Value passed is a name handle and that name has a
-		 * non-null value.  Use that name's value and type.
+		 * non-null value. Use that name's value and type.
 		 */
 		obj_desc = ((struct acpi_namespace_node *)object)->object;
 		object_type = ((struct acpi_namespace_node *)object)->type;
@@ -321,7 +321,7 @@
  *
  * RETURN:      Status
  *
- * DESCRIPTION: Low-level attach data.  Create and attach a Data object.
+ * DESCRIPTION: Low-level attach data. Create and attach a Data object.
  *
  ******************************************************************************/
 
@@ -377,7 +377,7 @@
  *
  * RETURN:      Status
  *
- * DESCRIPTION: Low-level detach data.  Delete the data node, but the caller
+ * DESCRIPTION: Low-level detach data. Delete the data node, but the caller
  *              is responsible for the actual data.
  *
  ******************************************************************************/
diff --git a/drivers/acpi/acpica/nsparse.c b/drivers/acpi/acpica/nsparse.c
index ec7ba2d..233f756 100644
--- a/drivers/acpi/acpica/nsparse.c
+++ b/drivers/acpi/acpica/nsparse.c
@@ -168,11 +168,11 @@
 	/*
 	 * AML Parse, pass 1
 	 *
-	 * In this pass, we load most of the namespace.  Control methods
-	 * are not parsed until later.  A parse tree is not created.  Instead,
-	 * each Parser Op subtree is deleted when it is finished.  This saves
+	 * In this pass, we load most of the namespace. Control methods
+	 * are not parsed until later. A parse tree is not created. Instead,
+	 * each Parser Op subtree is deleted when it is finished. This saves
 	 * a great deal of memory, and allows a small cache of parse objects
-	 * to service the entire parse.  The second pass of the parse then
+	 * to service the entire parse. The second pass of the parse then
 	 * performs another complete parse of the AML.
 	 */
 	ACPI_DEBUG_PRINT((ACPI_DB_PARSE, "**** Start pass 1\n"));
diff --git a/drivers/acpi/acpica/nssearch.c b/drivers/acpi/acpica/nssearch.c
index 456cc85..1d2d8ff 100644
--- a/drivers/acpi/acpica/nssearch.c
+++ b/drivers/acpi/acpica/nssearch.c
@@ -314,22 +314,7 @@
 	 * this problem, and we want to be able to enable ACPI support for them,
 	 * even though there are a few bad names.
 	 */
-	if (!acpi_ut_valid_acpi_name(target_name)) {
-		target_name =
-		    acpi_ut_repair_name(ACPI_CAST_PTR(char, &target_name));
-
-		/* Report warning only if in strict mode or debug mode */
-
-		if (!acpi_gbl_enable_interpreter_slack) {
-			ACPI_WARNING((AE_INFO,
-				      "Found bad character(s) in name, repaired: [%4.4s]\n",
-				      ACPI_CAST_PTR(char, &target_name)));
-		} else {
-			ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-					  "Found bad character(s) in name, repaired: [%4.4s]\n",
-					  ACPI_CAST_PTR(char, &target_name)));
-		}
-	}
+	acpi_ut_repair_name(ACPI_CAST_PTR(char, &target_name));
 
 	/* Try to find the name in the namespace level specified by the caller */
 
diff --git a/drivers/acpi/acpica/nsutils.c b/drivers/acpi/acpica/nsutils.c
index ef753a4..b5b4cb7 100644
--- a/drivers/acpi/acpica/nsutils.c
+++ b/drivers/acpi/acpica/nsutils.c
@@ -530,7 +530,7 @@
 	    ((num_segments > 0) ? (num_segments - 1) : 0) + 1;
 
 	/*
-	 * Check to see if we're still in bounds.  If not, there's a problem
+	 * Check to see if we're still in bounds. If not, there's a problem
 	 * with internal_name (invalid format).
 	 */
 	if (required_length > internal_name_length) {
@@ -557,10 +557,14 @@
 				(*converted_name)[j++] = '.';
 			}
 
-			(*converted_name)[j++] = internal_name[names_index++];
-			(*converted_name)[j++] = internal_name[names_index++];
-			(*converted_name)[j++] = internal_name[names_index++];
-			(*converted_name)[j++] = internal_name[names_index++];
+			/* Copy and validate the 4-char name segment */
+
+			ACPI_MOVE_NAME(&(*converted_name)[j],
+				       &internal_name[names_index]);
+			acpi_ut_repair_name(&(*converted_name)[j]);
+
+			j += ACPI_NAME_SIZE;
+			names_index += ACPI_NAME_SIZE;
 		}
 	}
 
@@ -681,7 +685,7 @@
  *                            \ (backslash) and ^ (carat) prefixes, and the
  *                            . (period) to separate segments are supported.
  *              prefix_node  - Root of subtree to be searched, or NS_ALL for the
- *                            root of the name space.  If Name is fully
+ *                            root of the name space. If Name is fully
  *                            qualified (first s8 is '\'), the passed value
  *                            of Scope will not be accessed.
  *              flags       - Used to indicate whether to perform upsearch or
@@ -689,7 +693,7 @@
  *              return_node - Where the Node is returned
  *
  * DESCRIPTION: Look up a name relative to a given scope and return the
- *              corresponding Node.  NOTE: Scope can be null.
+ *              corresponding Node. NOTE: Scope can be null.
  *
  * MUTEX:       Locks namespace
  *
diff --git a/drivers/acpi/acpica/nswalk.c b/drivers/acpi/acpica/nswalk.c
index 730bccc..0483877 100644
--- a/drivers/acpi/acpica/nswalk.c
+++ b/drivers/acpi/acpica/nswalk.c
@@ -60,8 +60,8 @@
  * RETURN:      struct acpi_namespace_node - Pointer to the NEXT child or NULL if
  *                                    none is found.
  *
- * DESCRIPTION: Return the next peer node within the namespace.  If Handle
- *              is valid, Scope is ignored.  Otherwise, the first node
+ * DESCRIPTION: Return the next peer node within the namespace. If Handle
+ *              is valid, Scope is ignored. Otherwise, the first node
  *              within Scope is returned.
  *
  ******************************************************************************/
@@ -97,8 +97,8 @@
  * RETURN:      struct acpi_namespace_node - Pointer to the NEXT child or NULL if
  *                                    none is found.
  *
- * DESCRIPTION: Return the next peer node within the namespace.  If Handle
- *              is valid, Scope is ignored.  Otherwise, the first node
+ * DESCRIPTION: Return the next peer node within the namespace. If Handle
+ *              is valid, Scope is ignored. Otherwise, the first node
  *              within Scope is returned.
  *
  ******************************************************************************/
@@ -305,7 +305,7 @@
 
 		/*
 		 * Depth first search: Attempt to go down another level in the
-		 * namespace if we are allowed to.  Don't go any further if we have
+		 * namespace if we are allowed to. Don't go any further if we have
 		 * reached the caller specified maximum depth or if the user
 		 * function has specified that the maximum depth has been reached.
 		 */
diff --git a/drivers/acpi/acpica/nsxfeval.c b/drivers/acpi/acpica/nsxfeval.c
index 9692e67..d6a9f77 100644
--- a/drivers/acpi/acpica/nsxfeval.c
+++ b/drivers/acpi/acpica/nsxfeval.c
@@ -61,16 +61,16 @@
  * PARAMETERS:  handle              - Object handle (optional)
  *              pathname            - Object pathname (optional)
  *              external_params     - List of parameters to pass to method,
- *                                    terminated by NULL.  May be NULL
+ *                                    terminated by NULL. May be NULL
  *                                    if no parameters are being passed.
  *              return_buffer       - Where to put method's return value (if
- *                                    any).  If NULL, no value is returned.
+ *                                    any). If NULL, no value is returned.
  *              return_type         - Expected type of return object
  *
  * RETURN:      Status
  *
  * DESCRIPTION: Find and evaluate the given object, passing the given
- *              parameters if necessary.  One of "Handle" or "Pathname" must
+ *              parameters if necessary. One of "Handle" or "Pathname" must
  *              be valid (non-null)
  *
  ******************************************************************************/
@@ -155,15 +155,15 @@
  * PARAMETERS:  handle              - Object handle (optional)
  *              pathname            - Object pathname (optional)
  *              external_params     - List of parameters to pass to method,
- *                                    terminated by NULL.  May be NULL
+ *                                    terminated by NULL. May be NULL
  *                                    if no parameters are being passed.
  *              return_buffer       - Where to put method's return value (if
- *                                    any).  If NULL, no value is returned.
+ *                                    any). If NULL, no value is returned.
  *
  * RETURN:      Status
  *
  * DESCRIPTION: Find and evaluate the given object, passing the given
- *              parameters if necessary.  One of "Handle" or "Pathname" must
+ *              parameters if necessary. One of "Handle" or "Pathname" must
  *              be valid (non-null)
  *
  ******************************************************************************/
@@ -542,15 +542,15 @@
 	acpi_status status;
 	struct acpi_namespace_node *node;
 	u32 flags;
-	struct acpica_device_id *hid;
-	struct acpica_device_id_list *cid;
+	struct acpi_pnp_device_id *hid;
+	struct acpi_pnp_device_id_list *cid;
 	u32 i;
 	u8 found;
 	int no_match;
 
 	status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
 	if (ACPI_FAILURE(status)) {
-		return (status);
+		return_ACPI_STATUS(status);
 	}
 
 	node = acpi_ns_validate_handle(obj_handle);
@@ -656,7 +656,7 @@
  * DESCRIPTION: Performs a modified depth-first walk of the namespace tree,
  *              starting (and ending) at the object specified by start_handle.
  *              The user_function is called whenever an object of type
- *              Device is found.  If the user function returns
+ *              Device is found. If the user function returns
  *              a non-zero value, the search is terminated immediately and this
  *              value is returned to the caller.
  *
diff --git a/drivers/acpi/acpica/nsxfname.c b/drivers/acpi/acpica/nsxfname.c
index 08e9610..811c6f1 100644
--- a/drivers/acpi/acpica/nsxfname.c
+++ b/drivers/acpi/acpica/nsxfname.c
@@ -53,8 +53,8 @@
 ACPI_MODULE_NAME("nsxfname")
 
 /* Local prototypes */
-static char *acpi_ns_copy_device_id(struct acpica_device_id *dest,
-				    struct acpica_device_id *source,
+static char *acpi_ns_copy_device_id(struct acpi_pnp_device_id *dest,
+				    struct acpi_pnp_device_id *source,
 				    char *string_area);
 
 /******************************************************************************
@@ -69,8 +69,8 @@
  * RETURN:      Status
  *
  * DESCRIPTION: This routine will search for a caller specified name in the
- *              name space.  The caller can restrict the search region by
- *              specifying a non NULL parent.  The parent value is itself a
+ *              name space. The caller can restrict the search region by
+ *              specifying a non NULL parent. The parent value is itself a
  *              namespace handle.
  *
  ******************************************************************************/
@@ -149,7 +149,7 @@
  * RETURN:      Pointer to a string containing the fully qualified Name.
  *
  * DESCRIPTION: This routine returns the fully qualified name associated with
- *              the Handle parameter.  This and the acpi_pathname_to_handle are
+ *              the Handle parameter. This and the acpi_pathname_to_handle are
  *              complementary functions.
  *
  ******************************************************************************/
@@ -202,8 +202,7 @@
 
 	/* Just copy the ACPI name from the Node and zero terminate it */
 
-	ACPI_STRNCPY(buffer->pointer, acpi_ut_get_node_name(node),
-		     ACPI_NAME_SIZE);
+	ACPI_MOVE_NAME(buffer->pointer, acpi_ut_get_node_name(node));
 	((char *)buffer->pointer)[ACPI_NAME_SIZE] = 0;
 	status = AE_OK;
 
@@ -219,20 +218,21 @@
  *
  * FUNCTION:    acpi_ns_copy_device_id
  *
- * PARAMETERS:  dest                - Pointer to the destination DEVICE_ID
- *              source              - Pointer to the source DEVICE_ID
+ * PARAMETERS:  dest                - Pointer to the destination PNP_DEVICE_ID
+ *              source              - Pointer to the source PNP_DEVICE_ID
  *              string_area         - Pointer to where to copy the dest string
  *
  * RETURN:      Pointer to the next string area
  *
- * DESCRIPTION: Copy a single DEVICE_ID, including the string data.
+ * DESCRIPTION: Copy a single PNP_DEVICE_ID, including the string data.
  *
  ******************************************************************************/
-static char *acpi_ns_copy_device_id(struct acpica_device_id *dest,
-				    struct acpica_device_id *source,
+static char *acpi_ns_copy_device_id(struct acpi_pnp_device_id *dest,
+				    struct acpi_pnp_device_id *source,
 				    char *string_area)
 {
-	/* Create the destination DEVICE_ID */
+
+	/* Create the destination PNP_DEVICE_ID */
 
 	dest->string = string_area;
 	dest->length = source->length;
@@ -256,8 +256,8 @@
  *              namespace node and possibly by running several standard
  *              control methods (Such as in the case of a device.)
  *
- * For Device and Processor objects, run the Device _HID, _UID, _CID, _STA,
- * _ADR, _sx_w, and _sx_d methods.
+ * For Device and Processor objects, run the Device _HID, _UID, _CID, _SUB,
+ * _STA, _ADR, _sx_w, and _sx_d methods.
  *
  * Note: Allocates the return buffer, must be freed by the caller.
  *
@@ -269,9 +269,10 @@
 {
 	struct acpi_namespace_node *node;
 	struct acpi_device_info *info;
-	struct acpica_device_id_list *cid_list = NULL;
-	struct acpica_device_id *hid = NULL;
-	struct acpica_device_id *uid = NULL;
+	struct acpi_pnp_device_id_list *cid_list = NULL;
+	struct acpi_pnp_device_id *hid = NULL;
+	struct acpi_pnp_device_id *uid = NULL;
+	struct acpi_pnp_device_id *sub = NULL;
 	char *next_id_string;
 	acpi_object_type type;
 	acpi_name name;
@@ -316,7 +317,7 @@
 	if ((type == ACPI_TYPE_DEVICE) || (type == ACPI_TYPE_PROCESSOR)) {
 		/*
 		 * Get extra info for ACPI Device/Processor objects only:
-		 * Run the Device _HID, _UID, and _CID methods.
+		 * Run the Device _HID, _UID, _SUB, and _CID methods.
 		 *
 		 * Note: none of these methods are required, so they may or may
 		 * not be present for this device. The Info->Valid bitfield is used
@@ -339,6 +340,14 @@
 			valid |= ACPI_VALID_UID;
 		}
 
+		/* Execute the Device._SUB method */
+
+		status = acpi_ut_execute_SUB(node, &sub);
+		if (ACPI_SUCCESS(status)) {
+			info_size += sub->length;
+			valid |= ACPI_VALID_SUB;
+		}
+
 		/* Execute the Device._CID method */
 
 		status = acpi_ut_execute_CID(node, &cid_list);
@@ -348,7 +357,7 @@
 
 			info_size +=
 			    (cid_list->list_size -
-			     sizeof(struct acpica_device_id_list));
+			     sizeof(struct acpi_pnp_device_id_list));
 			valid |= ACPI_VALID_CID;
 		}
 	}
@@ -418,16 +427,17 @@
 	next_id_string = ACPI_CAST_PTR(char, info->compatible_id_list.ids);
 	if (cid_list) {
 
-		/* Point past the CID DEVICE_ID array */
+		/* Point past the CID PNP_DEVICE_ID array */
 
 		next_id_string +=
 		    ((acpi_size) cid_list->count *
-		     sizeof(struct acpica_device_id));
+		     sizeof(struct acpi_pnp_device_id));
 	}
 
 	/*
-	 * Copy the HID, UID, and CIDs to the return buffer. The variable-length
-	 * strings are copied to the reserved area at the end of the buffer.
+	 * Copy the HID, UID, SUB, and CIDs to the return buffer.
+	 * The variable-length strings are copied to the reserved area
+	 * at the end of the buffer.
 	 *
 	 * For HID and CID, check if the ID is a PCI Root Bridge.
 	 */
@@ -445,6 +455,11 @@
 							uid, next_id_string);
 	}
 
+	if (sub) {
+		next_id_string = acpi_ns_copy_device_id(&info->subsystem_id,
+							sub, next_id_string);
+	}
+
 	if (cid_list) {
 		info->compatible_id_list.count = cid_list->count;
 		info->compatible_id_list.list_size = cid_list->list_size;
@@ -481,6 +496,9 @@
 	if (uid) {
 		ACPI_FREE(uid);
 	}
+	if (sub) {
+		ACPI_FREE(sub);
+	}
 	if (cid_list) {
 		ACPI_FREE(cid_list);
 	}
diff --git a/drivers/acpi/acpica/nsxfobj.c b/drivers/acpi/acpica/nsxfobj.c
index 6766fc4..9d029da 100644
--- a/drivers/acpi/acpica/nsxfobj.c
+++ b/drivers/acpi/acpica/nsxfobj.c
@@ -220,8 +220,8 @@
  *
  * RETURN:      Status
  *
- * DESCRIPTION: Return the next peer object within the namespace.  If Handle is
- *              valid, Scope is ignored.  Otherwise, the first object within
+ * DESCRIPTION: Return the next peer object within the namespace. If Handle is
+ *              valid, Scope is ignored. Otherwise, the first object within
  *              Scope is returned.
  *
  ******************************************************************************/
diff --git a/drivers/acpi/acpica/psargs.c b/drivers/acpi/acpica/psargs.c
index 844464c..cb79e2d 100644
--- a/drivers/acpi/acpica/psargs.c
+++ b/drivers/acpi/acpica/psargs.c
@@ -120,7 +120,7 @@
  * RETURN:      Pointer to end-of-package +1
  *
  * DESCRIPTION: Get next package length and return a pointer past the end of
- *              the package.  Consumes the package length field
+ *              the package. Consumes the package length field
  *
  ******************************************************************************/
 
@@ -147,8 +147,8 @@
  * RETURN:      Pointer to the start of the name string (pointer points into
  *              the AML.
  *
- * DESCRIPTION: Get next raw namestring within the AML stream.  Handles all name
- *              prefix characters.  Set parser state to point past the string.
+ * DESCRIPTION: Get next raw namestring within the AML stream. Handles all name
+ *              prefix characters. Set parser state to point past the string.
  *              (Name is consumed from the AML.)
  *
  ******************************************************************************/
@@ -220,7 +220,7 @@
  *
  * DESCRIPTION: Get next name (if method call, return # of required args).
  *              Names are looked up in the internal namespace to determine
- *              if the name represents a control method.  If a method
+ *              if the name represents a control method. If a method
  *              is found, the number of arguments to the method is returned.
  *              This information is critical for parsing to continue correctly.
  *
diff --git a/drivers/acpi/acpica/psloop.c b/drivers/acpi/acpica/psloop.c
index 799162c..5607805 100644
--- a/drivers/acpi/acpica/psloop.c
+++ b/drivers/acpi/acpica/psloop.c
@@ -133,18 +133,46 @@
 
 	case AML_CLASS_UNKNOWN:
 
-		/* The opcode is unrecognized. Just skip unknown opcodes */
+		/* The opcode is unrecognized. Complain and skip unknown opcodes */
 
-		ACPI_ERROR((AE_INFO,
-			    "Found unknown opcode 0x%X at AML address %p offset 0x%X, ignoring",
-			    walk_state->opcode, walk_state->parser_state.aml,
-			    walk_state->aml_offset));
+		if (walk_state->pass_number == 2) {
+			ACPI_ERROR((AE_INFO,
+				    "Unknown opcode 0x%.2X at table offset 0x%.4X, ignoring",
+				    walk_state->opcode,
+				    (u32)(walk_state->aml_offset +
+					  sizeof(struct acpi_table_header))));
 
-		ACPI_DUMP_BUFFER(walk_state->parser_state.aml, 128);
+			ACPI_DUMP_BUFFER(walk_state->parser_state.aml - 16, 48);
 
-		/* Assume one-byte bad opcode */
+#ifdef ACPI_ASL_COMPILER
+			/*
+			 * This is executed for the disassembler only. Output goes
+			 * to the disassembled ASL output file.
+			 */
+			acpi_os_printf
+			    ("/*\nError: Unknown opcode 0x%.2X at table offset 0x%.4X, context:\n",
+			     walk_state->opcode,
+			     (u32)(walk_state->aml_offset +
+				   sizeof(struct acpi_table_header)));
+
+			/* Dump the context surrounding the invalid opcode */
+
+			acpi_ut_dump_buffer(((u8 *)walk_state->parser_state.
+					     aml - 16), 48, DB_BYTE_DISPLAY,
+					    walk_state->aml_offset +
+					    sizeof(struct acpi_table_header) -
+					    16);
+			acpi_os_printf(" */\n");
+#endif
+		}
+
+		/* Increment past one-byte or two-byte opcode */
 
 		walk_state->parser_state.aml++;
+		if (walk_state->opcode > 0xFF) {	/* Can only happen if first byte is 0x5B */
+			walk_state->parser_state.aml++;
+		}
+
 		return_ACPI_STATUS(AE_CTRL_PARSE_CONTINUE);
 
 	default:
@@ -519,11 +547,18 @@
 					if ((op_info->class ==
 					     AML_CLASS_EXECUTE) && (!arg)) {
 						ACPI_WARNING((AE_INFO,
-							      "Detected an unsupported executable opcode "
-							      "at module-level: [0x%.4X] at table offset 0x%.4X",
-							      op->common.aml_opcode,
-							      (u32)((aml_op_start - walk_state->parser_state.aml_start)
-								+ sizeof(struct acpi_table_header))));
+							      "Unsupported module-level executable opcode "
+							      "0x%.2X at table offset 0x%.4X",
+							      op->common.
+							      aml_opcode,
+							      (u32)
+							      (ACPI_PTR_DIFF
+							       (aml_op_start,
+								walk_state->
+								parser_state.
+								aml_start) +
+							       sizeof(struct
+								      acpi_table_header))));
 					}
 				}
 				break;
@@ -843,8 +878,6 @@
 		*op = NULL;
 	}
 
-	ACPI_PREEMPTION_POINT();
-
 	return_ACPI_STATUS(AE_OK);
 }
 
diff --git a/drivers/acpi/acpica/psopcode.c b/drivers/acpi/acpica/psopcode.c
index ed1d457..1793d93 100644
--- a/drivers/acpi/acpica/psopcode.c
+++ b/drivers/acpi/acpica/psopcode.c
@@ -59,7 +59,7 @@
  *
  * DESCRIPTION: Opcode table. Each entry contains <opcode, type, name, operands>
  *              The name is a simple ascii string, the operand specifier is an
- *              ascii string with one letter per operand.  The letter specifies
+ *              ascii string with one letter per operand. The letter specifies
  *              the operand type.
  *
  ******************************************************************************/
@@ -183,7 +183,7 @@
  ******************************************************************************/
 
 /*
- * Master Opcode information table.  A summary of everything we know about each
+ * Master Opcode information table. A summary of everything we know about each
  * opcode, all in one place.
  */
 const struct acpi_opcode_info acpi_gbl_aml_op_info[AML_NUM_OPCODES] = {
@@ -392,10 +392,12 @@
 		 AML_FLAGS_EXEC_1A_0T_1R | AML_NO_OPERAND_RESOLVE),
 /* 38 */ ACPI_OP("LAnd", ARGP_LAND_OP, ARGI_LAND_OP, ACPI_TYPE_ANY,
 		 AML_CLASS_EXECUTE, AML_TYPE_EXEC_2A_0T_1R,
-		 AML_FLAGS_EXEC_2A_0T_1R | AML_LOGICAL_NUMERIC | AML_CONSTANT),
+			 AML_FLAGS_EXEC_2A_0T_1R | AML_LOGICAL_NUMERIC |
+			 AML_CONSTANT),
 /* 39 */ ACPI_OP("LOr", ARGP_LOR_OP, ARGI_LOR_OP, ACPI_TYPE_ANY,
 		 AML_CLASS_EXECUTE, AML_TYPE_EXEC_2A_0T_1R,
-		 AML_FLAGS_EXEC_2A_0T_1R | AML_LOGICAL_NUMERIC | AML_CONSTANT),
+		 	 AML_FLAGS_EXEC_2A_0T_1R | AML_LOGICAL_NUMERIC |
+			 AML_CONSTANT),
 /* 3A */ ACPI_OP("LNot", ARGP_LNOT_OP, ARGI_LNOT_OP, ACPI_TYPE_ANY,
 		 AML_CLASS_EXECUTE, AML_TYPE_EXEC_1A_0T_1R,
 		 AML_FLAGS_EXEC_1A_0T_1R | AML_CONSTANT),
@@ -495,7 +497,8 @@
 		 AML_NSNODE | AML_NAMED | AML_DEFER),
 /* 59 */ ACPI_OP("Field", ARGP_FIELD_OP, ARGI_FIELD_OP, ACPI_TYPE_ANY,
 		 AML_CLASS_NAMED_OBJECT, AML_TYPE_NAMED_FIELD,
-		 AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE | AML_FIELD),
+			 AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE |
+			 AML_FIELD),
 /* 5A */ ACPI_OP("Device", ARGP_DEVICE_OP, ARGI_DEVICE_OP,
 		 ACPI_TYPE_DEVICE, AML_CLASS_NAMED_OBJECT,
 		 AML_TYPE_NAMED_NO_OBJ,
@@ -519,12 +522,13 @@
 /* 5E */ ACPI_OP("IndexField", ARGP_INDEX_FIELD_OP, ARGI_INDEX_FIELD_OP,
 		 ACPI_TYPE_ANY, AML_CLASS_NAMED_OBJECT,
 		 AML_TYPE_NAMED_FIELD,
-		 AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE | AML_FIELD),
+		 	 AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE |
+			 AML_FIELD),
 /* 5F */ ACPI_OP("BankField", ARGP_BANK_FIELD_OP, ARGI_BANK_FIELD_OP,
-		 ACPI_TYPE_LOCAL_BANK_FIELD, AML_CLASS_NAMED_OBJECT,
-		 AML_TYPE_NAMED_FIELD,
-		 AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE | AML_FIELD |
-		 AML_DEFER),
+		 	 ACPI_TYPE_LOCAL_BANK_FIELD,
+			 AML_CLASS_NAMED_OBJECT, AML_TYPE_NAMED_FIELD,
+		 	 AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE |
+			 AML_FIELD | AML_DEFER),
 
 /* Internal opcodes that map to invalid AML opcodes */
 
@@ -632,7 +636,8 @@
 /* 7D */ ACPI_OP("[EvalSubTree]", ARGP_SCOPE_OP, ARGI_SCOPE_OP,
 		 ACPI_TYPE_ANY, AML_CLASS_NAMED_OBJECT,
 		 AML_TYPE_NAMED_NO_OBJ,
-		 AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE | AML_NSNODE),
+		 	 AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE |
+			 AML_NSNODE),
 
 /* ACPI 3.0 opcodes */
 
@@ -695,7 +700,7 @@
 
 /*
  * This table is indexed by the second opcode of the extended opcode
- * pair.  It returns an index into the opcode table (acpi_gbl_aml_op_info)
+ * pair. It returns an index into the opcode table (acpi_gbl_aml_op_info)
  */
 static const u8 acpi_gbl_long_op_index[NUM_EXTENDED_OPCODE] = {
 /*              0     1     2     3     4     5     6     7  */
diff --git a/drivers/acpi/acpica/psparse.c b/drivers/acpi/acpica/psparse.c
index 0198570..2494caf 100644
--- a/drivers/acpi/acpica/psparse.c
+++ b/drivers/acpi/acpica/psparse.c
@@ -43,9 +43,9 @@
 
 /*
  * Parse the AML and build an operation tree as most interpreters,
- * like Perl, do.  Parsing is done by hand rather than with a YACC
+ * like Perl, do. Parsing is done by hand rather than with a YACC
  * generated parser to tightly constrain stack and dynamic memory
- * usage.  At the same time, parsing is kept flexible and the code
+ * usage. At the same time, parsing is kept flexible and the code
  * fairly compact by parsing based on a list of AML opcode
  * templates in aml_op_info[]
  */
@@ -379,7 +379,7 @@
 	case AE_CTRL_FALSE:
 		/*
 		 * Either an IF/WHILE Predicate was false or we encountered a BREAK
-		 * opcode.  In both cases, we do not execute the rest of the
+		 * opcode. In both cases, we do not execute the rest of the
 		 * package;  We simply close out the parent (finishing the walk of
 		 * this branch of the tree) and continue execution at the parent
 		 * level.
@@ -459,8 +459,9 @@
 
 			/* Executing a control method - additional cleanup */
 
-			acpi_ds_terminate_control_method(
-				walk_state->method_desc, walk_state);
+			acpi_ds_terminate_control_method(walk_state->
+							 method_desc,
+							 walk_state);
 		}
 
 		acpi_ds_delete_walk_state(walk_state);
@@ -487,7 +488,7 @@
 	acpi_gbl_current_walk_list = thread;
 
 	/*
-	 * Execute the walk loop as long as there is a valid Walk State.  This
+	 * Execute the walk loop as long as there is a valid Walk State. This
 	 * handles nested control method invocations without recursion.
 	 */
 	ACPI_DEBUG_PRINT((ACPI_DB_PARSE, "State=%p\n", walk_state));
diff --git a/drivers/acpi/acpica/psutils.c b/drivers/acpi/acpica/psutils.c
index 8736ad5..4137dcb 100644
--- a/drivers/acpi/acpica/psutils.c
+++ b/drivers/acpi/acpica/psutils.c
@@ -108,7 +108,7 @@
  * RETURN:      Pointer to the new Op, null on failure
  *
  * DESCRIPTION: Allocate an acpi_op, choose op type (and thus size) based on
- *              opcode.  A cache of opcodes is available for the pure
+ *              opcode. A cache of opcodes is available for the pure
  *              GENERIC_OP, since this is by far the most commonly used.
  *
  ******************************************************************************/
@@ -164,7 +164,7 @@
  *
  * RETURN:      None.
  *
- * DESCRIPTION: Free an Op object.  Either put it on the GENERIC_OP cache list
+ * DESCRIPTION: Free an Op object. Either put it on the GENERIC_OP cache list
  *              or actually free it.
  *
  ******************************************************************************/
diff --git a/drivers/acpi/acpica/rscalc.c b/drivers/acpi/acpica/rscalc.c
index de12469..147feb6 100644
--- a/drivers/acpi/acpica/rscalc.c
+++ b/drivers/acpi/acpica/rscalc.c
@@ -457,6 +457,15 @@
 			 * Get the number of vendor data bytes
 			 */
 			extra_struct_bytes = resource_length;
+
+			/*
+			 * There is already one byte included in the minimum
+			 * descriptor size. If there are extra struct bytes,
+			 * subtract one from the count.
+			 */
+			if (extra_struct_bytes) {
+				extra_struct_bytes--;
+			}
 			break;
 
 		case ACPI_RESOURCE_NAME_END_TAG:
@@ -601,7 +610,7 @@
 	/*
 	 * Calculate the size of the return buffer.
 	 * The base size is the number of elements * the sizes of the
-	 * structures.  Additional space for the strings is added below.
+	 * structures. Additional space for the strings is added below.
 	 * The minus one is to subtract the size of the u8 Source[1]
 	 * member because it is added below.
 	 *
@@ -664,8 +673,7 @@
 						     (*sub_object_list)->string.
 						     length + 1);
 			} else {
-				temp_size_needed +=
-				    acpi_ns_get_pathname_length((*sub_object_list)->reference.node);
+				temp_size_needed += acpi_ns_get_pathname_length((*sub_object_list)->reference.node);
 			}
 		} else {
 			/*
diff --git a/drivers/acpi/acpica/rslist.c b/drivers/acpi/acpica/rslist.c
index 46b5324..8b64db9 100644
--- a/drivers/acpi/acpica/rslist.c
+++ b/drivers/acpi/acpica/rslist.c
@@ -109,7 +109,7 @@
 		ACPI_ERROR((AE_INFO,
 			    "Invalid/unsupported resource descriptor: Type 0x%2.2X",
 			    resource_index));
-		return (AE_AML_INVALID_RESOURCE_TYPE);
+		return_ACPI_STATUS(AE_AML_INVALID_RESOURCE_TYPE);
 	}
 
 	/* Convert the AML byte stream resource to a local resource struct */
@@ -200,7 +200,7 @@
 			ACPI_ERROR((AE_INFO,
 				    "Invalid/unsupported resource descriptor: Type 0x%2.2X",
 				    resource->type));
-			return (AE_AML_INVALID_RESOURCE_TYPE);
+			return_ACPI_STATUS(AE_AML_INVALID_RESOURCE_TYPE);
 		}
 
 		status = acpi_rs_convert_resource_to_aml(resource,
diff --git a/drivers/acpi/acpica/tbfind.c b/drivers/acpi/acpica/tbfind.c
index 57deae1..77d1db2 100644
--- a/drivers/acpi/acpica/tbfind.c
+++ b/drivers/acpi/acpica/tbfind.c
@@ -77,7 +77,7 @@
 	/* Normalize the input strings */
 
 	ACPI_MEMSET(&header, 0, sizeof(struct acpi_table_header));
-	ACPI_STRNCPY(header.signature, signature, ACPI_NAME_SIZE);
+	ACPI_MOVE_NAME(header.signature, signature);
 	ACPI_STRNCPY(header.oem_id, oem_id, ACPI_OEM_ID_SIZE);
 	ACPI_STRNCPY(header.oem_table_id, oem_table_id, ACPI_OEM_TABLE_ID_SIZE);
 
diff --git a/drivers/acpi/acpica/tbinstal.c b/drivers/acpi/acpica/tbinstal.c
index 70f9d78..f540ae4 100644
--- a/drivers/acpi/acpica/tbinstal.c
+++ b/drivers/acpi/acpica/tbinstal.c
@@ -526,6 +526,8 @@
 
 	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "ACPI Tables freed\n"));
 	(void)acpi_ut_release_mutex(ACPI_MTX_TABLES);
+
+	return_VOID;
 }
 
 /*******************************************************************************
diff --git a/drivers/acpi/acpica/tbutils.c b/drivers/acpi/acpica/tbutils.c
index b6cea30..285e24b 100644
--- a/drivers/acpi/acpica/tbutils.c
+++ b/drivers/acpi/acpica/tbutils.c
@@ -354,7 +354,7 @@
 		sum = (u8) (sum + *(buffer++));
 	}
 
-	return sum;
+	return (sum);
 }
 
 /*******************************************************************************
diff --git a/drivers/acpi/acpica/tbxface.c b/drivers/acpi/acpica/tbxface.c
index 2110126..f563278 100644
--- a/drivers/acpi/acpica/tbxface.c
+++ b/drivers/acpi/acpica/tbxface.c
@@ -236,7 +236,7 @@
 						       sizeof(struct
 							      acpi_table_header));
 				if (!header) {
-					return AE_NO_MEMORY;
+					return (AE_NO_MEMORY);
 				}
 				ACPI_MEMCPY(out_table_header, header,
 					    sizeof(struct acpi_table_header));
@@ -244,7 +244,7 @@
 						     sizeof(struct
 							    acpi_table_header));
 			} else {
-				return AE_NOT_FOUND;
+				return (AE_NOT_FOUND);
 			}
 		} else {
 			ACPI_MEMCPY(out_table_header,
diff --git a/drivers/acpi/acpica/tbxfload.c b/drivers/acpi/acpica/tbxfload.c
index f87cc63..a5e1e4e 100644
--- a/drivers/acpi/acpica/tbxfload.c
+++ b/drivers/acpi/acpica/tbxfload.c
@@ -211,7 +211,7 @@
  * DESCRIPTION: Dynamically load an ACPI table from the caller's buffer. Must
  *              be a valid ACPI table with a valid ACPI table header.
  *              Note1: Mainly intended to support hotplug addition of SSDTs.
- *              Note2: Does not copy the incoming table. User is reponsible
+ *              Note2: Does not copy the incoming table. User is responsible
  *              to ensure that the table is not deleted or unmapped.
  *
  ******************************************************************************/
diff --git a/drivers/acpi/acpica/tbxfroot.c b/drivers/acpi/acpica/tbxfroot.c
index 74e7208..28f3302 100644
--- a/drivers/acpi/acpica/tbxfroot.c
+++ b/drivers/acpi/acpica/tbxfroot.c
@@ -67,7 +67,6 @@
 
 static acpi_status acpi_tb_validate_rsdp(struct acpi_table_rsdp *rsdp)
 {
-	ACPI_FUNCTION_ENTRY();
 
 	/*
 	 * The signature and checksum must both be correct
@@ -108,7 +107,7 @@
  * RETURN:      Status, RSDP physical address
  *
  * DESCRIPTION: Search lower 1Mbyte of memory for the root system descriptor
- *              pointer structure.  If it is found, set *RSDP to point to it.
+ *              pointer structure. If it is found, set *RSDP to point to it.
  *
  * NOTE1:       The RSDP must be either in the first 1K of the Extended
  *              BIOS Data Area or between E0000 and FFFFF (From ACPI Spec.)
diff --git a/drivers/acpi/acpica/utcache.c b/drivers/acpi/acpica/utcache.c
new file mode 100644
index 0000000..e1d40ed2
--- /dev/null
+++ b/drivers/acpi/acpica/utcache.c
@@ -0,0 +1,323 @@
+/******************************************************************************
+ *
+ * Module Name: utcache - local cache allocation routines
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2012, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+
+#define _COMPONENT          ACPI_UTILITIES
+ACPI_MODULE_NAME("utcache")
+
+#ifdef ACPI_USE_LOCAL_CACHE
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_os_create_cache
+ *
+ * PARAMETERS:  cache_name      - Ascii name for the cache
+ *              object_size     - Size of each cached object
+ *              max_depth       - Maximum depth of the cache (in objects)
+ *              return_cache    - Where the new cache object is returned
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Create a cache object
+ *
+ ******************************************************************************/
+acpi_status
+acpi_os_create_cache(char *cache_name,
+		     u16 object_size,
+		     u16 max_depth, struct acpi_memory_list ** return_cache)
+{
+	struct acpi_memory_list *cache;
+
+	ACPI_FUNCTION_ENTRY();
+
+	if (!cache_name || !return_cache || (object_size < 16)) {
+		return (AE_BAD_PARAMETER);
+	}
+
+	/* Create the cache object */
+
+	cache = acpi_os_allocate(sizeof(struct acpi_memory_list));
+	if (!cache) {
+		return (AE_NO_MEMORY);
+	}
+
+	/* Populate the cache object and return it */
+
+	ACPI_MEMSET(cache, 0, sizeof(struct acpi_memory_list));
+	cache->link_offset = 8;
+	cache->list_name = cache_name;
+	cache->object_size = object_size;
+	cache->max_depth = max_depth;
+
+	*return_cache = cache;
+	return (AE_OK);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_os_purge_cache
+ *
+ * PARAMETERS:  cache           - Handle to cache object
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Free all objects within the requested cache.
+ *
+ ******************************************************************************/
+
+acpi_status acpi_os_purge_cache(struct acpi_memory_list * cache)
+{
+	char *next;
+	acpi_status status;
+
+	ACPI_FUNCTION_ENTRY();
+
+	if (!cache) {
+		return (AE_BAD_PARAMETER);
+	}
+
+	status = acpi_ut_acquire_mutex(ACPI_MTX_CACHES);
+	if (ACPI_FAILURE(status)) {
+		return (status);
+	}
+
+	/* Walk the list of objects in this cache */
+
+	while (cache->list_head) {
+
+		/* Delete and unlink one cached state object */
+
+		next = *(ACPI_CAST_INDIRECT_PTR(char,
+						&(((char *)cache->
+						   list_head)[cache->
+							      link_offset])));
+		ACPI_FREE(cache->list_head);
+
+		cache->list_head = next;
+		cache->current_depth--;
+	}
+
+	(void)acpi_ut_release_mutex(ACPI_MTX_CACHES);
+	return (AE_OK);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_os_delete_cache
+ *
+ * PARAMETERS:  cache           - Handle to cache object
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Free all objects within the requested cache and delete the
+ *              cache object.
+ *
+ ******************************************************************************/
+
+acpi_status acpi_os_delete_cache(struct acpi_memory_list * cache)
+{
+	acpi_status status;
+
+	ACPI_FUNCTION_ENTRY();
+
+	/* Purge all objects in the cache */
+
+	status = acpi_os_purge_cache(cache);
+	if (ACPI_FAILURE(status)) {
+		return (status);
+	}
+
+	/* Now we can delete the cache object */
+
+	acpi_os_free(cache);
+	return (AE_OK);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_os_release_object
+ *
+ * PARAMETERS:  cache       - Handle to cache object
+ *              object      - The object to be released
+ *
+ * RETURN:      None
+ *
+ * DESCRIPTION: Release an object to the specified cache. If cache is full,
+ *              the object is deleted.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_os_release_object(struct acpi_memory_list * cache, void *object)
+{
+	acpi_status status;
+
+	ACPI_FUNCTION_ENTRY();
+
+	if (!cache || !object) {
+		return (AE_BAD_PARAMETER);
+	}
+
+	/* If cache is full, just free this object */
+
+	if (cache->current_depth >= cache->max_depth) {
+		ACPI_FREE(object);
+		ACPI_MEM_TRACKING(cache->total_freed++);
+	}
+
+	/* Otherwise put this object back into the cache */
+
+	else {
+		status = acpi_ut_acquire_mutex(ACPI_MTX_CACHES);
+		if (ACPI_FAILURE(status)) {
+			return (status);
+		}
+
+		/* Mark the object as cached */
+
+		ACPI_MEMSET(object, 0xCA, cache->object_size);
+		ACPI_SET_DESCRIPTOR_TYPE(object, ACPI_DESC_TYPE_CACHED);
+
+		/* Put the object at the head of the cache list */
+
+		*(ACPI_CAST_INDIRECT_PTR(char,
+					 &(((char *)object)[cache->
+							    link_offset]))) =
+		    cache->list_head;
+		cache->list_head = object;
+		cache->current_depth++;
+
+		(void)acpi_ut_release_mutex(ACPI_MTX_CACHES);
+	}
+
+	return (AE_OK);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_os_acquire_object
+ *
+ * PARAMETERS:  cache           - Handle to cache object
+ *
+ * RETURN:      the acquired object. NULL on error
+ *
+ * DESCRIPTION: Get an object from the specified cache. If cache is empty,
+ *              the object is allocated.
+ *
+ ******************************************************************************/
+
+void *acpi_os_acquire_object(struct acpi_memory_list *cache)
+{
+	acpi_status status;
+	void *object;
+
+	ACPI_FUNCTION_NAME(os_acquire_object);
+
+	if (!cache) {
+		return (NULL);
+	}
+
+	status = acpi_ut_acquire_mutex(ACPI_MTX_CACHES);
+	if (ACPI_FAILURE(status)) {
+		return (NULL);
+	}
+
+	ACPI_MEM_TRACKING(cache->requests++);
+
+	/* Check the cache first */
+
+	if (cache->list_head) {
+
+		/* There is an object available, use it */
+
+		object = cache->list_head;
+		cache->list_head = *(ACPI_CAST_INDIRECT_PTR(char,
+							    &(((char *)
+							       object)[cache->
+								       link_offset])));
+
+		cache->current_depth--;
+
+		ACPI_MEM_TRACKING(cache->hits++);
+		ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
+				  "Object %p from %s cache\n", object,
+				  cache->list_name));
+
+		status = acpi_ut_release_mutex(ACPI_MTX_CACHES);
+		if (ACPI_FAILURE(status)) {
+			return (NULL);
+		}
+
+		/* Clear (zero) the previously used Object */
+
+		ACPI_MEMSET(object, 0, cache->object_size);
+	} else {
+		/* The cache is empty, create a new object */
+
+		ACPI_MEM_TRACKING(cache->total_allocated++);
+
+#ifdef ACPI_DBG_TRACK_ALLOCATIONS
+		if ((cache->total_allocated - cache->total_freed) >
+		    cache->max_occupied) {
+			cache->max_occupied =
+			    cache->total_allocated - cache->total_freed;
+		}
+#endif
+
+		/* Avoid deadlock with ACPI_ALLOCATE_ZEROED */
+
+		status = acpi_ut_release_mutex(ACPI_MTX_CACHES);
+		if (ACPI_FAILURE(status)) {
+			return (NULL);
+		}
+
+		object = ACPI_ALLOCATE_ZEROED(cache->object_size);
+		if (!object) {
+			return (NULL);
+		}
+	}
+
+	return (object);
+}
+#endif				/* ACPI_USE_LOCAL_CACHE */
diff --git a/drivers/acpi/acpica/utclib.c b/drivers/acpi/acpica/utclib.c
new file mode 100644
index 0000000..19ea4755
--- /dev/null
+++ b/drivers/acpi/acpica/utclib.c
@@ -0,0 +1,749 @@
+/******************************************************************************
+ *
+ * Module Name: cmclib - Local implementation of C library functions
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2012, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+
+/*
+ * These implementations of standard C Library routines can optionally be
+ * used if a C library is not available. In general, they are less efficient
+ * than an inline or assembly implementation
+ */
+
+#define _COMPONENT          ACPI_UTILITIES
+ACPI_MODULE_NAME("cmclib")
+
+#ifndef ACPI_USE_SYSTEM_CLIBRARY
+#define NEGATIVE    1
+#define POSITIVE    0
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_memcmp (memcmp)
+ *
+ * PARAMETERS:  buffer1         - First Buffer
+ *              buffer2         - Second Buffer
+ *              count           - Maximum # of bytes to compare
+ *
+ * RETURN:      Index where Buffers mismatched, or 0 if Buffers matched
+ *
+ * DESCRIPTION: Compare two Buffers, with a maximum length
+ *
+ ******************************************************************************/
+int acpi_ut_memcmp(const char *buffer1, const char *buffer2, acpi_size count)
+{
+
+	return ((count == ACPI_SIZE_MAX) ? 0 : ((unsigned char)*buffer1 -
+						(unsigned char)*buffer2));
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_memcpy (memcpy)
+ *
+ * PARAMETERS:  dest        - Target of the copy
+ *              src         - Source buffer to copy
+ *              count       - Number of bytes to copy
+ *
+ * RETURN:      Dest
+ *
+ * DESCRIPTION: Copy arbitrary bytes of memory
+ *
+ ******************************************************************************/
+
+void *acpi_ut_memcpy(void *dest, const void *src, acpi_size count)
+{
+	char *new = (char *)dest;
+	char *old = (char *)src;
+
+	while (count) {
+		*new = *old;
+		new++;
+		old++;
+		count--;
+	}
+
+	return (dest);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_memset (memset)
+ *
+ * PARAMETERS:  dest        - Buffer to set
+ *              value       - Value to set each byte of memory
+ *              count       - Number of bytes to set
+ *
+ * RETURN:      Dest
+ *
+ * DESCRIPTION: Initialize a buffer to a known value.
+ *
+ ******************************************************************************/
+
+void *acpi_ut_memset(void *dest, u8 value, acpi_size count)
+{
+	char *new = (char *)dest;
+
+	while (count) {
+		*new = (char)value;
+		new++;
+		count--;
+	}
+
+	return (dest);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_strlen (strlen)
+ *
+ * PARAMETERS:  string              - Null terminated string
+ *
+ * RETURN:      Length
+ *
+ * DESCRIPTION: Returns the length of the input string
+ *
+ ******************************************************************************/
+
+acpi_size acpi_ut_strlen(const char *string)
+{
+	u32 length = 0;
+
+	/* Count the string until a null is encountered */
+
+	while (*string) {
+		length++;
+		string++;
+	}
+
+	return (length);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_strcpy (strcpy)
+ *
+ * PARAMETERS:  dst_string      - Target of the copy
+ *              src_string      - The source string to copy
+ *
+ * RETURN:      dst_string
+ *
+ * DESCRIPTION: Copy a null terminated string
+ *
+ ******************************************************************************/
+
+char *acpi_ut_strcpy(char *dst_string, const char *src_string)
+{
+	char *string = dst_string;
+
+	/* Move bytes brute force */
+
+	while (*src_string) {
+		*string = *src_string;
+
+		string++;
+		src_string++;
+	}
+
+	/* Null terminate */
+
+	*string = 0;
+	return (dst_string);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_strncpy (strncpy)
+ *
+ * PARAMETERS:  dst_string      - Target of the copy
+ *              src_string      - The source string to copy
+ *              count           - Maximum # of bytes to copy
+ *
+ * RETURN:      dst_string
+ *
+ * DESCRIPTION: Copy a null terminated string, with a maximum length
+ *
+ ******************************************************************************/
+
+char *acpi_ut_strncpy(char *dst_string, const char *src_string, acpi_size count)
+{
+	char *string = dst_string;
+
+	/* Copy the string */
+
+	for (string = dst_string;
+	     count && (count--, (*string++ = *src_string++));) {;
+	}
+
+	/* Pad with nulls if necessary */
+
+	while (count--) {
+		*string = 0;
+		string++;
+	}
+
+	/* Return original pointer */
+
+	return (dst_string);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_strcmp (strcmp)
+ *
+ * PARAMETERS:  string1         - First string
+ *              string2         - Second string
+ *
+ * RETURN:      Index where strings mismatched, or 0 if strings matched
+ *
+ * DESCRIPTION: Compare two null terminated strings
+ *
+ ******************************************************************************/
+
+int acpi_ut_strcmp(const char *string1, const char *string2)
+{
+
+	for (; (*string1 == *string2); string2++) {
+		if (!*string1++) {
+			return (0);
+		}
+	}
+
+	return ((unsigned char)*string1 - (unsigned char)*string2);
+}
+
+#ifdef ACPI_FUTURE_IMPLEMENTATION
+/* Not used at this time */
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_strchr (strchr)
+ *
+ * PARAMETERS:  string          - Search string
+ *              ch              - character to search for
+ *
+ * RETURN:      Ptr to char or NULL if not found
+ *
+ * DESCRIPTION: Search a string for a character
+ *
+ ******************************************************************************/
+
+char *acpi_ut_strchr(const char *string, int ch)
+{
+
+	for (; (*string); string++) {
+		if ((*string) == (char)ch) {
+			return ((char *)string);
+		}
+	}
+
+	return (NULL);
+}
+#endif
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_strncmp (strncmp)
+ *
+ * PARAMETERS:  string1         - First string
+ *              string2         - Second string
+ *              count           - Maximum # of bytes to compare
+ *
+ * RETURN:      Index where strings mismatched, or 0 if strings matched
+ *
+ * DESCRIPTION: Compare two null terminated strings, with a maximum length
+ *
+ ******************************************************************************/
+
+int acpi_ut_strncmp(const char *string1, const char *string2, acpi_size count)
+{
+
+	for (; count-- && (*string1 == *string2); string2++) {
+		if (!*string1++) {
+			return (0);
+		}
+	}
+
+	return ((count == ACPI_SIZE_MAX) ? 0 : ((unsigned char)*string1 -
+						(unsigned char)*string2));
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_strcat (Strcat)
+ *
+ * PARAMETERS:  dst_string      - Target of the copy
+ *              src_string      - The source string to copy
+ *
+ * RETURN:      dst_string
+ *
+ * DESCRIPTION: Append a null terminated string to a null terminated string
+ *
+ ******************************************************************************/
+
+char *acpi_ut_strcat(char *dst_string, const char *src_string)
+{
+	char *string;
+
+	/* Find end of the destination string */
+
+	for (string = dst_string; *string++;) {;
+	}
+
+	/* Concatenate the string */
+
+	for (--string; (*string++ = *src_string++);) {;
+	}
+
+	return (dst_string);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_strncat (strncat)
+ *
+ * PARAMETERS:  dst_string      - Target of the copy
+ *              src_string      - The source string to copy
+ *              count           - Maximum # of bytes to copy
+ *
+ * RETURN:      dst_string
+ *
+ * DESCRIPTION: Append a null terminated string to a null terminated string,
+ *              with a maximum count.
+ *
+ ******************************************************************************/
+
+char *acpi_ut_strncat(char *dst_string, const char *src_string, acpi_size count)
+{
+	char *string;
+
+	if (count) {
+
+		/* Find end of the destination string */
+
+		for (string = dst_string; *string++;) {;
+		}
+
+		/* Concatenate the string */
+
+		for (--string; (*string++ = *src_string++) && --count;) {;
+		}
+
+		/* Null terminate if necessary */
+
+		if (!count) {
+			*string = 0;
+		}
+	}
+
+	return (dst_string);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_strstr (strstr)
+ *
+ * PARAMETERS:  string1         - Target string
+ *              string2         - Substring to search for
+ *
+ * RETURN:      Where substring match starts, Null if no match found
+ *
+ * DESCRIPTION: Checks if String2 occurs in String1. This is not really a
+ *              full implementation of strstr, only sufficient for command
+ *              matching
+ *
+ ******************************************************************************/
+
+char *acpi_ut_strstr(char *string1, char *string2)
+{
+	char *string;
+
+	if (acpi_ut_strlen(string2) > acpi_ut_strlen(string1)) {
+		return (NULL);
+	}
+
+	/* Walk entire string, comparing the letters */
+
+	for (string = string1; *string2;) {
+		if (*string2 != *string) {
+			return (NULL);
+		}
+
+		string2++;
+		string++;
+	}
+
+	return (string1);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_strtoul (strtoul)
+ *
+ * PARAMETERS:  string          - Null terminated string
+ *              terminater      - Where a pointer to the terminating byte is
+ *                                returned
+ *              base            - Radix of the string
+ *
+ * RETURN:      Converted value
+ *
+ * DESCRIPTION: Convert a string into a 32-bit unsigned value.
+ *              Note: use acpi_ut_strtoul64 for 64-bit integers.
+ *
+ ******************************************************************************/
+
+u32 acpi_ut_strtoul(const char *string, char **terminator, u32 base)
+{
+	u32 converted = 0;
+	u32 index;
+	u32 sign;
+	const char *string_start;
+	u32 return_value = 0;
+	acpi_status status = AE_OK;
+
+	/*
+	 * Save the value of the pointer to the buffer's first
+	 * character, save the current errno value, and then
+	 * skip over any white space in the buffer:
+	 */
+	string_start = string;
+	while (ACPI_IS_SPACE(*string) || *string == '\t') {
+		++string;
+	}
+
+	/*
+	 * The buffer may contain an optional plus or minus sign.
+	 * If it does, then skip over it but remember what is was:
+	 */
+	if (*string == '-') {
+		sign = NEGATIVE;
+		++string;
+	} else if (*string == '+') {
+		++string;
+		sign = POSITIVE;
+	} else {
+		sign = POSITIVE;
+	}
+
+	/*
+	 * If the input parameter Base is zero, then we need to
+	 * determine if it is octal, decimal, or hexadecimal:
+	 */
+	if (base == 0) {
+		if (*string == '0') {
+			if (acpi_ut_to_lower(*(++string)) == 'x') {
+				base = 16;
+				++string;
+			} else {
+				base = 8;
+			}
+		} else {
+			base = 10;
+		}
+	} else if (base < 2 || base > 36) {
+		/*
+		 * The specified Base parameter is not in the domain of
+		 * this function:
+		 */
+		goto done;
+	}
+
+	/*
+	 * For octal and hexadecimal bases, skip over the leading
+	 * 0 or 0x, if they are present.
+	 */
+	if (base == 8 && *string == '0') {
+		string++;
+	}
+
+	if (base == 16 &&
+	    *string == '0' && acpi_ut_to_lower(*(++string)) == 'x') {
+		string++;
+	}
+
+	/*
+	 * Main loop: convert the string to an unsigned long:
+	 */
+	while (*string) {
+		if (ACPI_IS_DIGIT(*string)) {
+			index = (u32)((u8)*string - '0');
+		} else {
+			index = (u32)acpi_ut_to_upper(*string);
+			if (ACPI_IS_UPPER(index)) {
+				index = index - 'A' + 10;
+			} else {
+				goto done;
+			}
+		}
+
+		if (index >= base) {
+			goto done;
+		}
+
+		/*
+		 * Check to see if value is out of range:
+		 */
+
+		if (return_value > ((ACPI_UINT32_MAX - (u32)index) / (u32)base)) {
+			status = AE_ERROR;
+			return_value = 0;	/* reset */
+		} else {
+			return_value *= base;
+			return_value += index;
+			converted = 1;
+		}
+
+		++string;
+	}
+
+      done:
+	/*
+	 * If appropriate, update the caller's pointer to the next
+	 * unconverted character in the buffer.
+	 */
+	if (terminator) {
+		if (converted == 0 && return_value == 0 && string != NULL) {
+			*terminator = (char *)string_start;
+		} else {
+			*terminator = (char *)string;
+		}
+	}
+
+	if (status == AE_ERROR) {
+		return_value = ACPI_UINT32_MAX;
+	}
+
+	/*
+	 * If a minus sign was present, then "the conversion is negated":
+	 */
+	if (sign == NEGATIVE) {
+		return_value = (ACPI_UINT32_MAX - return_value) + 1;
+	}
+
+	return (return_value);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_to_upper (TOUPPER)
+ *
+ * PARAMETERS:  c           - Character to convert
+ *
+ * RETURN:      Converted character as an int
+ *
+ * DESCRIPTION: Convert character to uppercase
+ *
+ ******************************************************************************/
+
+int acpi_ut_to_upper(int c)
+{
+
+	return (ACPI_IS_LOWER(c) ? ((c) - 0x20) : (c));
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_to_lower (TOLOWER)
+ *
+ * PARAMETERS:  c           - Character to convert
+ *
+ * RETURN:      Converted character as an int
+ *
+ * DESCRIPTION: Convert character to lowercase
+ *
+ ******************************************************************************/
+
+int acpi_ut_to_lower(int c)
+{
+
+	return (ACPI_IS_UPPER(c) ? ((c) + 0x20) : (c));
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    is* functions
+ *
+ * DESCRIPTION: is* functions use the ctype table below
+ *
+ ******************************************************************************/
+
+const u8 _acpi_ctype[257] = {
+	_ACPI_CN,		/* 0x00     0 NUL */
+	_ACPI_CN,		/* 0x01     1 SOH */
+	_ACPI_CN,		/* 0x02     2 STX */
+	_ACPI_CN,		/* 0x03     3 ETX */
+	_ACPI_CN,		/* 0x04     4 EOT */
+	_ACPI_CN,		/* 0x05     5 ENQ */
+	_ACPI_CN,		/* 0x06     6 ACK */
+	_ACPI_CN,		/* 0x07     7 BEL */
+	_ACPI_CN,		/* 0x08     8 BS  */
+	_ACPI_CN | _ACPI_SP,	/* 0x09     9 TAB */
+	_ACPI_CN | _ACPI_SP,	/* 0x0A    10 LF  */
+	_ACPI_CN | _ACPI_SP,	/* 0x0B    11 VT  */
+	_ACPI_CN | _ACPI_SP,	/* 0x0C    12 FF  */
+	_ACPI_CN | _ACPI_SP,	/* 0x0D    13 CR  */
+	_ACPI_CN,		/* 0x0E    14 SO  */
+	_ACPI_CN,		/* 0x0F    15 SI  */
+	_ACPI_CN,		/* 0x10    16 DLE */
+	_ACPI_CN,		/* 0x11    17 DC1 */
+	_ACPI_CN,		/* 0x12    18 DC2 */
+	_ACPI_CN,		/* 0x13    19 DC3 */
+	_ACPI_CN,		/* 0x14    20 DC4 */
+	_ACPI_CN,		/* 0x15    21 NAK */
+	_ACPI_CN,		/* 0x16    22 SYN */
+	_ACPI_CN,		/* 0x17    23 ETB */
+	_ACPI_CN,		/* 0x18    24 CAN */
+	_ACPI_CN,		/* 0x19    25 EM  */
+	_ACPI_CN,		/* 0x1A    26 SUB */
+	_ACPI_CN,		/* 0x1B    27 ESC */
+	_ACPI_CN,		/* 0x1C    28 FS  */
+	_ACPI_CN,		/* 0x1D    29 GS  */
+	_ACPI_CN,		/* 0x1E    30 RS  */
+	_ACPI_CN,		/* 0x1F    31 US  */
+	_ACPI_XS | _ACPI_SP,	/* 0x20    32 ' ' */
+	_ACPI_PU,		/* 0x21    33 '!' */
+	_ACPI_PU,		/* 0x22    34 '"' */
+	_ACPI_PU,		/* 0x23    35 '#' */
+	_ACPI_PU,		/* 0x24    36 '$' */
+	_ACPI_PU,		/* 0x25    37 '%' */
+	_ACPI_PU,		/* 0x26    38 '&' */
+	_ACPI_PU,		/* 0x27    39 ''' */
+	_ACPI_PU,		/* 0x28    40 '(' */
+	_ACPI_PU,		/* 0x29    41 ')' */
+	_ACPI_PU,		/* 0x2A    42 '*' */
+	_ACPI_PU,		/* 0x2B    43 '+' */
+	_ACPI_PU,		/* 0x2C    44 ',' */
+	_ACPI_PU,		/* 0x2D    45 '-' */
+	_ACPI_PU,		/* 0x2E    46 '.' */
+	_ACPI_PU,		/* 0x2F    47 '/' */
+	_ACPI_XD | _ACPI_DI,	/* 0x30    48 '0' */
+	_ACPI_XD | _ACPI_DI,	/* 0x31    49 '1' */
+	_ACPI_XD | _ACPI_DI,	/* 0x32    50 '2' */
+	_ACPI_XD | _ACPI_DI,	/* 0x33    51 '3' */
+	_ACPI_XD | _ACPI_DI,	/* 0x34    52 '4' */
+	_ACPI_XD | _ACPI_DI,	/* 0x35    53 '5' */
+	_ACPI_XD | _ACPI_DI,	/* 0x36    54 '6' */
+	_ACPI_XD | _ACPI_DI,	/* 0x37    55 '7' */
+	_ACPI_XD | _ACPI_DI,	/* 0x38    56 '8' */
+	_ACPI_XD | _ACPI_DI,	/* 0x39    57 '9' */
+	_ACPI_PU,		/* 0x3A    58 ':' */
+	_ACPI_PU,		/* 0x3B    59 ';' */
+	_ACPI_PU,		/* 0x3C    60 '<' */
+	_ACPI_PU,		/* 0x3D    61 '=' */
+	_ACPI_PU,		/* 0x3E    62 '>' */
+	_ACPI_PU,		/* 0x3F    63 '?' */
+	_ACPI_PU,		/* 0x40    64 '@' */
+	_ACPI_XD | _ACPI_UP,	/* 0x41    65 'A' */
+	_ACPI_XD | _ACPI_UP,	/* 0x42    66 'B' */
+	_ACPI_XD | _ACPI_UP,	/* 0x43    67 'C' */
+	_ACPI_XD | _ACPI_UP,	/* 0x44    68 'D' */
+	_ACPI_XD | _ACPI_UP,	/* 0x45    69 'E' */
+	_ACPI_XD | _ACPI_UP,	/* 0x46    70 'F' */
+	_ACPI_UP,		/* 0x47    71 'G' */
+	_ACPI_UP,		/* 0x48    72 'H' */
+	_ACPI_UP,		/* 0x49    73 'I' */
+	_ACPI_UP,		/* 0x4A    74 'J' */
+	_ACPI_UP,		/* 0x4B    75 'K' */
+	_ACPI_UP,		/* 0x4C    76 'L' */
+	_ACPI_UP,		/* 0x4D    77 'M' */
+	_ACPI_UP,		/* 0x4E    78 'N' */
+	_ACPI_UP,		/* 0x4F    79 'O' */
+	_ACPI_UP,		/* 0x50    80 'P' */
+	_ACPI_UP,		/* 0x51    81 'Q' */
+	_ACPI_UP,		/* 0x52    82 'R' */
+	_ACPI_UP,		/* 0x53    83 'S' */
+	_ACPI_UP,		/* 0x54    84 'T' */
+	_ACPI_UP,		/* 0x55    85 'U' */
+	_ACPI_UP,		/* 0x56    86 'V' */
+	_ACPI_UP,		/* 0x57    87 'W' */
+	_ACPI_UP,		/* 0x58    88 'X' */
+	_ACPI_UP,		/* 0x59    89 'Y' */
+	_ACPI_UP,		/* 0x5A    90 'Z' */
+	_ACPI_PU,		/* 0x5B    91 '[' */
+	_ACPI_PU,		/* 0x5C    92 '\' */
+	_ACPI_PU,		/* 0x5D    93 ']' */
+	_ACPI_PU,		/* 0x5E    94 '^' */
+	_ACPI_PU,		/* 0x5F    95 '_' */
+	_ACPI_PU,		/* 0x60    96 '`' */
+	_ACPI_XD | _ACPI_LO,	/* 0x61    97 'a' */
+	_ACPI_XD | _ACPI_LO,	/* 0x62    98 'b' */
+	_ACPI_XD | _ACPI_LO,	/* 0x63    99 'c' */
+	_ACPI_XD | _ACPI_LO,	/* 0x64   100 'd' */
+	_ACPI_XD | _ACPI_LO,	/* 0x65   101 'e' */
+	_ACPI_XD | _ACPI_LO,	/* 0x66   102 'f' */
+	_ACPI_LO,		/* 0x67   103 'g' */
+	_ACPI_LO,		/* 0x68   104 'h' */
+	_ACPI_LO,		/* 0x69   105 'i' */
+	_ACPI_LO,		/* 0x6A   106 'j' */
+	_ACPI_LO,		/* 0x6B   107 'k' */
+	_ACPI_LO,		/* 0x6C   108 'l' */
+	_ACPI_LO,		/* 0x6D   109 'm' */
+	_ACPI_LO,		/* 0x6E   110 'n' */
+	_ACPI_LO,		/* 0x6F   111 'o' */
+	_ACPI_LO,		/* 0x70   112 'p' */
+	_ACPI_LO,		/* 0x71   113 'q' */
+	_ACPI_LO,		/* 0x72   114 'r' */
+	_ACPI_LO,		/* 0x73   115 's' */
+	_ACPI_LO,		/* 0x74   116 't' */
+	_ACPI_LO,		/* 0x75   117 'u' */
+	_ACPI_LO,		/* 0x76   118 'v' */
+	_ACPI_LO,		/* 0x77   119 'w' */
+	_ACPI_LO,		/* 0x78   120 'x' */
+	_ACPI_LO,		/* 0x79   121 'y' */
+	_ACPI_LO,		/* 0x7A   122 'z' */
+	_ACPI_PU,		/* 0x7B   123 '{' */
+	_ACPI_PU,		/* 0x7C   124 '|' */
+	_ACPI_PU,		/* 0x7D   125 '}' */
+	_ACPI_PU,		/* 0x7E   126 '~' */
+	_ACPI_CN,		/* 0x7F   127 DEL */
+
+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,	/* 0x80 to 0x8F    */
+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,	/* 0x90 to 0x9F    */
+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,	/* 0xA0 to 0xAF    */
+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,	/* 0xB0 to 0xBF    */
+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,	/* 0xC0 to 0xCF    */
+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,	/* 0xD0 to 0xDF    */
+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,	/* 0xE0 to 0xEF    */
+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,	/* 0xF0 to 0xFF    */
+	0			/* 0x100 */
+};
+
+#endif				/* ACPI_USE_SYSTEM_CLIBRARY */
diff --git a/drivers/acpi/acpica/utdebug.c b/drivers/acpi/acpica/utdebug.c
index e810894..5d95166 100644
--- a/drivers/acpi/acpica/utdebug.c
+++ b/drivers/acpi/acpica/utdebug.c
@@ -47,8 +47,9 @@
 
 #define _COMPONENT          ACPI_UTILITIES
 ACPI_MODULE_NAME("utdebug")
+
 #ifdef ACPI_DEBUG_OUTPUT
-static acpi_thread_id acpi_gbl_prev_thread_id;
+static acpi_thread_id acpi_gbl_prev_thread_id = (acpi_thread_id) 0xFFFFFFFF;
 static char *acpi_gbl_fn_entry_str = "----Entry";
 static char *acpi_gbl_fn_exit_str = "----Exit-";
 
@@ -109,7 +110,7 @@
  * RETURN:      Updated pointer to the function name
  *
  * DESCRIPTION: Remove the "Acpi" prefix from the function name, if present.
- *              This allows compiler macros such as __func__ to be used
+ *              This allows compiler macros such as __FUNCTION__ to be used
  *              with no change to the debug output.
  *
  ******************************************************************************/
@@ -222,7 +223,7 @@
  *
  * RETURN:      None
  *
- * DESCRIPTION: Print message with no headers.  Has same interface as
+ * DESCRIPTION: Print message with no headers. Has same interface as
  *              debug_print so that the same macros can be used.
  *
  ******************************************************************************/
@@ -258,7 +259,7 @@
  *
  * RETURN:      None
  *
- * DESCRIPTION: Function entry trace.  Prints only if TRACE_FUNCTIONS bit is
+ * DESCRIPTION: Function entry trace. Prints only if TRACE_FUNCTIONS bit is
  *              set in debug_level
  *
  ******************************************************************************/
@@ -290,7 +291,7 @@
  *
  * RETURN:      None
  *
- * DESCRIPTION: Function entry trace.  Prints only if TRACE_FUNCTIONS bit is
+ * DESCRIPTION: Function entry trace. Prints only if TRACE_FUNCTIONS bit is
  *              set in debug_level
  *
  ******************************************************************************/
@@ -299,6 +300,7 @@
 		  const char *function_name,
 		  const char *module_name, u32 component_id, void *pointer)
 {
+
 	acpi_gbl_nesting_level++;
 	acpi_ut_track_stack_ptr();
 
@@ -319,7 +321,7 @@
  *
  * RETURN:      None
  *
- * DESCRIPTION: Function entry trace.  Prints only if TRACE_FUNCTIONS bit is
+ * DESCRIPTION: Function entry trace. Prints only if TRACE_FUNCTIONS bit is
  *              set in debug_level
  *
  ******************************************************************************/
@@ -350,7 +352,7 @@
  *
  * RETURN:      None
  *
- * DESCRIPTION: Function entry trace.  Prints only if TRACE_FUNCTIONS bit is
+ * DESCRIPTION: Function entry trace. Prints only if TRACE_FUNCTIONS bit is
  *              set in debug_level
  *
  ******************************************************************************/
@@ -380,7 +382,7 @@
  *
  * RETURN:      None
  *
- * DESCRIPTION: Function exit trace.  Prints only if TRACE_FUNCTIONS bit is
+ * DESCRIPTION: Function exit trace. Prints only if TRACE_FUNCTIONS bit is
  *              set in debug_level
  *
  ******************************************************************************/
@@ -412,7 +414,7 @@
  *
  * RETURN:      None
  *
- * DESCRIPTION: Function exit trace.  Prints only if TRACE_FUNCTIONS bit is
+ * DESCRIPTION: Function exit trace. Prints only if TRACE_FUNCTIONS bit is
  *              set in debug_level. Prints exit status also.
  *
  ******************************************************************************/
@@ -453,7 +455,7 @@
  *
  * RETURN:      None
  *
- * DESCRIPTION: Function exit trace.  Prints only if TRACE_FUNCTIONS bit is
+ * DESCRIPTION: Function exit trace. Prints only if TRACE_FUNCTIONS bit is
  *              set in debug_level. Prints exit value also.
  *
  ******************************************************************************/
@@ -485,7 +487,7 @@
  *
  * RETURN:      None
  *
- * DESCRIPTION: Function exit trace.  Prints only if TRACE_FUNCTIONS bit is
+ * DESCRIPTION: Function exit trace. Prints only if TRACE_FUNCTIONS bit is
  *              set in debug_level. Prints exit value also.
  *
  ******************************************************************************/
@@ -511,7 +513,7 @@
  * PARAMETERS:  buffer              - Buffer to dump
  *              count               - Amount to dump, in bytes
  *              display             - BYTE, WORD, DWORD, or QWORD display
- *              component_ID        - Caller's component ID
+ *              offset              - Beginning buffer offset (display only)
  *
  * RETURN:      None
  *
@@ -519,7 +521,7 @@
  *
  ******************************************************************************/
 
-void acpi_ut_dump_buffer2(u8 * buffer, u32 count, u32 display)
+void acpi_ut_dump_buffer(u8 *buffer, u32 count, u32 display, u32 base_offset)
 {
 	u32 i = 0;
 	u32 j;
@@ -541,7 +543,7 @@
 
 		/* Print current offset */
 
-		acpi_os_printf("%6.4X: ", i);
+		acpi_os_printf("%6.4X: ", (base_offset + i));
 
 		/* Print 16 hex chars */
 
@@ -623,7 +625,7 @@
 
 /*******************************************************************************
  *
- * FUNCTION:    acpi_ut_dump_buffer
+ * FUNCTION:    acpi_ut_debug_dump_buffer
  *
  * PARAMETERS:  buffer              - Buffer to dump
  *              count               - Amount to dump, in bytes
@@ -636,7 +638,8 @@
  *
  ******************************************************************************/
 
-void acpi_ut_dump_buffer(u8 * buffer, u32 count, u32 display, u32 component_id)
+void
+acpi_ut_debug_dump_buffer(u8 *buffer, u32 count, u32 display, u32 component_id)
 {
 
 	/* Only dump the buffer if tracing is enabled */
@@ -646,5 +649,5 @@
 		return;
 	}
 
-	acpi_ut_dump_buffer2(buffer, count, display);
+	acpi_ut_dump_buffer(buffer, count, display, 0);
 }
diff --git a/drivers/acpi/acpica/utids.c b/drivers/acpi/acpica/utids.c
index 5d84e19..774c3ae 100644
--- a/drivers/acpi/acpica/utids.c
+++ b/drivers/acpi/acpica/utids.c
@@ -67,10 +67,10 @@
  ******************************************************************************/
 acpi_status
 acpi_ut_execute_HID(struct acpi_namespace_node *device_node,
-		    struct acpica_device_id **return_id)
+		    struct acpi_pnp_device_id **return_id)
 {
 	union acpi_operand_object *obj_desc;
-	struct acpica_device_id *hid;
+	struct acpi_pnp_device_id *hid;
 	u32 length;
 	acpi_status status;
 
@@ -94,16 +94,17 @@
 	/* Allocate a buffer for the HID */
 
 	hid =
-	    ACPI_ALLOCATE_ZEROED(sizeof(struct acpica_device_id) +
+	    ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_pnp_device_id) +
 				 (acpi_size) length);
 	if (!hid) {
 		status = AE_NO_MEMORY;
 		goto cleanup;
 	}
 
-	/* Area for the string starts after DEVICE_ID struct */
+	/* Area for the string starts after PNP_DEVICE_ID struct */
 
-	hid->string = ACPI_ADD_PTR(char, hid, sizeof(struct acpica_device_id));
+	hid->string =
+	    ACPI_ADD_PTR(char, hid, sizeof(struct acpi_pnp_device_id));
 
 	/* Convert EISAID to a string or simply copy existing string */
 
@@ -126,6 +127,73 @@
 
 /*******************************************************************************
  *
+ * FUNCTION:    acpi_ut_execute_SUB
+ *
+ * PARAMETERS:  device_node         - Node for the device
+ *              return_id           - Where the _SUB is returned
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Executes the _SUB control method that returns the subsystem
+ *              ID of the device. The _SUB value is always a string containing
+ *              either a valid PNP or ACPI ID.
+ *
+ *              NOTE: Internal function, no parameter validation
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ut_execute_SUB(struct acpi_namespace_node *device_node,
+		    struct acpi_pnp_device_id **return_id)
+{
+	union acpi_operand_object *obj_desc;
+	struct acpi_pnp_device_id *sub;
+	u32 length;
+	acpi_status status;
+
+	ACPI_FUNCTION_TRACE(ut_execute_SUB);
+
+	status = acpi_ut_evaluate_object(device_node, METHOD_NAME__SUB,
+					 ACPI_BTYPE_STRING, &obj_desc);
+	if (ACPI_FAILURE(status)) {
+		return_ACPI_STATUS(status);
+	}
+
+	/* Get the size of the String to be returned, includes null terminator */
+
+	length = obj_desc->string.length + 1;
+
+	/* Allocate a buffer for the SUB */
+
+	sub =
+	    ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_pnp_device_id) +
+				 (acpi_size) length);
+	if (!sub) {
+		status = AE_NO_MEMORY;
+		goto cleanup;
+	}
+
+	/* Area for the string starts after PNP_DEVICE_ID struct */
+
+	sub->string =
+	    ACPI_ADD_PTR(char, sub, sizeof(struct acpi_pnp_device_id));
+
+	/* Simply copy existing string */
+
+	ACPI_STRCPY(sub->string, obj_desc->string.pointer);
+	sub->length = length;
+	*return_id = sub;
+
+      cleanup:
+
+	/* On exit, we must delete the return object */
+
+	acpi_ut_remove_reference(obj_desc);
+	return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
  * FUNCTION:    acpi_ut_execute_UID
  *
  * PARAMETERS:  device_node         - Node for the device
@@ -144,10 +212,10 @@
 
 acpi_status
 acpi_ut_execute_UID(struct acpi_namespace_node *device_node,
-		    struct acpica_device_id **return_id)
+		    struct acpi_pnp_device_id **return_id)
 {
 	union acpi_operand_object *obj_desc;
-	struct acpica_device_id *uid;
+	struct acpi_pnp_device_id *uid;
 	u32 length;
 	acpi_status status;
 
@@ -171,16 +239,17 @@
 	/* Allocate a buffer for the UID */
 
 	uid =
-	    ACPI_ALLOCATE_ZEROED(sizeof(struct acpica_device_id) +
+	    ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_pnp_device_id) +
 				 (acpi_size) length);
 	if (!uid) {
 		status = AE_NO_MEMORY;
 		goto cleanup;
 	}
 
-	/* Area for the string starts after DEVICE_ID struct */
+	/* Area for the string starts after PNP_DEVICE_ID struct */
 
-	uid->string = ACPI_ADD_PTR(char, uid, sizeof(struct acpica_device_id));
+	uid->string =
+	    ACPI_ADD_PTR(char, uid, sizeof(struct acpi_pnp_device_id));
 
 	/* Convert an Integer to string, or just copy an existing string */
 
@@ -226,11 +295,11 @@
 
 acpi_status
 acpi_ut_execute_CID(struct acpi_namespace_node *device_node,
-		    struct acpica_device_id_list **return_cid_list)
+		    struct acpi_pnp_device_id_list **return_cid_list)
 {
 	union acpi_operand_object **cid_objects;
 	union acpi_operand_object *obj_desc;
-	struct acpica_device_id_list *cid_list;
+	struct acpi_pnp_device_id_list *cid_list;
 	char *next_id_string;
 	u32 string_area_size;
 	u32 length;
@@ -288,11 +357,12 @@
 	/*
 	 * Now that we know the length of the CIDs, allocate return buffer:
 	 * 1) Size of the base structure +
-	 * 2) Size of the CID DEVICE_ID array +
+	 * 2) Size of the CID PNP_DEVICE_ID array +
 	 * 3) Size of the actual CID strings
 	 */
-	cid_list_size = sizeof(struct acpica_device_id_list) +
-	    ((count - 1) * sizeof(struct acpica_device_id)) + string_area_size;
+	cid_list_size = sizeof(struct acpi_pnp_device_id_list) +
+	    ((count - 1) * sizeof(struct acpi_pnp_device_id)) +
+	    string_area_size;
 
 	cid_list = ACPI_ALLOCATE_ZEROED(cid_list_size);
 	if (!cid_list) {
@@ -300,10 +370,10 @@
 		goto cleanup;
 	}
 
-	/* Area for CID strings starts after the CID DEVICE_ID array */
+	/* Area for CID strings starts after the CID PNP_DEVICE_ID array */
 
 	next_id_string = ACPI_CAST_PTR(char, cid_list->ids) +
-	    ((acpi_size) count * sizeof(struct acpica_device_id));
+	    ((acpi_size) count * sizeof(struct acpi_pnp_device_id));
 
 	/* Copy/convert the CIDs to the return buffer */
 
diff --git a/drivers/acpi/acpica/utmath.c b/drivers/acpi/acpica/utmath.c
index d88a8aa..4956367 100644
--- a/drivers/acpi/acpica/utmath.c
+++ b/drivers/acpi/acpica/utmath.c
@@ -81,7 +81,7 @@
  * RETURN:      Status (Checks for divide-by-zero)
  *
  * DESCRIPTION: Perform a short (maximum 64 bits divided by 32 bits)
- *              divide and modulo.  The result is a 64-bit quotient and a
+ *              divide and modulo. The result is a 64-bit quotient and a
  *              32-bit remainder.
  *
  ******************************************************************************/
diff --git a/drivers/acpi/acpica/utmisc.c b/drivers/acpi/acpica/utmisc.c
index 33c6cf7..9286a69 100644
--- a/drivers/acpi/acpica/utmisc.c
+++ b/drivers/acpi/acpica/utmisc.c
@@ -41,8 +41,6 @@
  * POSSIBILITY OF SUCH DAMAGES.
  */
 
-#include <linux/module.h>
-
 #include <acpi/acpi.h>
 #include "accommon.h"
 #include "acnamesp.h"
@@ -201,8 +199,8 @@
 				 */
 				acpi_gbl_owner_id_mask[j] |= (1 << k);
 
-				acpi_gbl_last_owner_id_index = (u8) j;
-				acpi_gbl_next_owner_id_offset = (u8) (k + 1);
+				acpi_gbl_last_owner_id_index = (u8)j;
+				acpi_gbl_next_owner_id_offset = (u8)(k + 1);
 
 				/*
 				 * Construct encoded ID from the index and bit position
@@ -252,7 +250,7 @@
  *              control method or unloading a table. Either way, we would
  *              ignore any error anyway.
  *
- * DESCRIPTION: Release a table or method owner ID.  Valid IDs are 1 - 255
+ * DESCRIPTION: Release a table or method owner ID. Valid IDs are 1 - 255
  *
  ******************************************************************************/
 
@@ -339,6 +337,73 @@
 	return;
 }
 
+#ifdef ACPI_ASL_COMPILER
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_strlwr (strlwr)
+ *
+ * PARAMETERS:  src_string      - The source string to convert
+ *
+ * RETURN:      None
+ *
+ * DESCRIPTION: Convert string to lowercase
+ *
+ * NOTE: This is not a POSIX function, so it appears here, not in utclib.c
+ *
+ ******************************************************************************/
+
+void acpi_ut_strlwr(char *src_string)
+{
+	char *string;
+
+	ACPI_FUNCTION_ENTRY();
+
+	if (!src_string) {
+		return;
+	}
+
+	/* Walk entire string, lowercasing the letters */
+
+	for (string = src_string; *string; string++) {
+		*string = (char)ACPI_TOLOWER(*string);
+	}
+
+	return;
+}
+
+/******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_stricmp
+ *
+ * PARAMETERS:  string1             - first string to compare
+ *              string2             - second string to compare
+ *
+ * RETURN:      int that signifies string relationship. Zero means strings
+ *              are equal.
+ *
+ * DESCRIPTION: Implementation of the non-ANSI stricmp function (compare
+ *              strings with no case sensitivity)
+ *
+ ******************************************************************************/
+
+int acpi_ut_stricmp(char *string1, char *string2)
+{
+	int c1;
+	int c2;
+
+	do {
+		c1 = tolower((int)*string1);
+		c2 = tolower((int)*string2);
+
+		string1++;
+		string2++;
+	}
+	while ((c1 == c2) && (c1));
+
+	return (c1 - c2);
+}
+#endif
+
 /*******************************************************************************
  *
  * FUNCTION:    acpi_ut_print_string
@@ -469,8 +534,8 @@
  * RETURN:      None
  *
  * DESCRIPTION: Set the global integer bit width based upon the revision
- *              of the DSDT.  For Revision 1 and 0, Integers are 32 bits.
- *              For Revision 2 and above, Integers are 64 bits.  Yes, this
+ *              of the DSDT. For Revision 1 and 0, Integers are 32 bits.
+ *              For Revision 2 and above, Integers are 64 bits. Yes, this
  *              makes a difference.
  *
  ******************************************************************************/
@@ -606,7 +671,7 @@
  *
  * RETURN:      TRUE if the name is valid, FALSE otherwise
  *
- * DESCRIPTION: Check for a valid ACPI name.  Each character must be one of:
+ * DESCRIPTION: Check for a valid ACPI name. Each character must be one of:
  *              1) Upper case alpha
  *              2) numeric
  *              3) underscore
@@ -638,29 +703,59 @@
  * RETURN:      Repaired version of the name
  *
  * DESCRIPTION: Repair an ACPI name: Change invalid characters to '*' and
- *              return the new name.
+ *              return the new name. NOTE: the Name parameter must reside in
+ *              read/write memory, cannot be a const.
+ *
+ * An ACPI Name must consist of valid ACPI characters. We will repair the name
+ * if necessary because we don't want to abort because of this, but we want
+ * all namespace names to be printable. A warning message is appropriate.
+ *
+ * This issue came up because there are in fact machines that exhibit
+ * this problem, and we want to be able to enable ACPI support for them,
+ * even though there are a few bad names.
  *
  ******************************************************************************/
 
-acpi_name acpi_ut_repair_name(char *name)
+void acpi_ut_repair_name(char *name)
 {
-       u32 i;
-	char new_name[ACPI_NAME_SIZE];
+	u32 i;
+	u8 found_bad_char = FALSE;
+	u32 original_name;
+
+	ACPI_FUNCTION_NAME(ut_repair_name);
+
+	ACPI_MOVE_NAME(&original_name, name);
+
+	/* Check each character in the name */
 
 	for (i = 0; i < ACPI_NAME_SIZE; i++) {
-		new_name[i] = name[i];
+		if (acpi_ut_valid_acpi_char(name[i], i)) {
+			continue;
+		}
 
 		/*
 		 * Replace a bad character with something printable, yet technically
 		 * still invalid. This prevents any collisions with existing "good"
 		 * names in the namespace.
 		 */
-		if (!acpi_ut_valid_acpi_char(name[i], i)) {
-			new_name[i] = '*';
-		}
+		name[i] = '*';
+		found_bad_char = TRUE;
 	}
 
-	return (*(u32 *) new_name);
+	if (found_bad_char) {
+
+		/* Report warning only if in strict mode or debug mode */
+
+		if (!acpi_gbl_enable_interpreter_slack) {
+			ACPI_WARNING((AE_INFO,
+				      "Found bad character(s) in name, repaired: [%4.4s]\n",
+				      name));
+		} else {
+			ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+					  "Found bad character(s) in name, repaired: [%4.4s]\n",
+					  name));
+		}
+	}
 }
 
 /*******************************************************************************
@@ -681,7 +776,7 @@
  *
  ******************************************************************************/
 
-acpi_status acpi_ut_strtoul64(char *string, u32 base, u64 * ret_integer)
+acpi_status acpi_ut_strtoul64(char *string, u32 base, u64 *ret_integer)
 {
 	u32 this_digit = 0;
 	u64 return_value = 0;
@@ -754,14 +849,14 @@
 
 			/* Convert ASCII 0-9 to Decimal value */
 
-			this_digit = ((u8) * string) - '0';
+			this_digit = ((u8)*string) - '0';
 		} else if (base == 10) {
 
 			/* Digit is out of range; possible in to_integer case only */
 
 			term = 1;
 		} else {
-			this_digit = (u8) ACPI_TOUPPER(*string);
+			this_digit = (u8)ACPI_TOUPPER(*string);
 			if (ACPI_IS_XDIGIT((char)this_digit)) {
 
 				/* Convert ASCII Hex char to value */
@@ -788,8 +883,9 @@
 
 		valid_digits++;
 
-		if (sign_of0x && ((valid_digits > 16)
-				  || ((valid_digits > 8) && mode32))) {
+		if (sign_of0x
+		    && ((valid_digits > 16)
+			|| ((valid_digits > 8) && mode32))) {
 			/*
 			 * This is to_integer operation case.
 			 * No any restrictions for string-to-integer conversion,
@@ -800,7 +896,7 @@
 
 		/* Divide the digit into the correct position */
 
-		(void)acpi_ut_short_divide((dividend - (u64) this_digit),
+		(void)acpi_ut_short_divide((dividend - (u64)this_digit),
 					   base, &quotient, NULL);
 
 		if (return_value > quotient) {
@@ -890,7 +986,7 @@
  ******************************************************************************/
 
 acpi_status
-acpi_ut_walk_package_tree(union acpi_operand_object * source_object,
+acpi_ut_walk_package_tree(union acpi_operand_object *source_object,
 			  void *target_object,
 			  acpi_pkg_callback walk_callback, void *context)
 {
@@ -917,10 +1013,10 @@
 
 		/*
 		 * Check for:
-		 * 1) An uninitialized package element.  It is completely
+		 * 1) An uninitialized package element. It is completely
 		 *    legal to declare a package and leave it uninitialized
 		 * 2) Not an internal object - can be a namespace node instead
-		 * 3) Any type other than a package.  Packages are handled in else
+		 * 3) Any type other than a package. Packages are handled in else
 		 *    case below.
 		 */
 		if ((!this_source_obj) ||
@@ -939,7 +1035,7 @@
 			       state->pkg.source_object->package.count) {
 				/*
 				 * We've handled all of the objects at this level,  This means
-				 * that we have just completed a package.  That package may
+				 * that we have just completed a package. That package may
 				 * have contained one or more packages itself.
 				 *
 				 * Delete this state and pop the previous state (package).
diff --git a/drivers/acpi/acpica/utmutex.c b/drivers/acpi/acpica/utmutex.c
index 296baa6..5ccf57c 100644
--- a/drivers/acpi/acpica/utmutex.c
+++ b/drivers/acpi/acpica/utmutex.c
@@ -193,6 +193,8 @@
 
 	acpi_gbl_mutex_info[mutex_id].mutex = NULL;
 	acpi_gbl_mutex_info[mutex_id].thread_id = ACPI_MUTEX_NOT_ACQUIRED;
+
+	return_VOID;
 }
 
 /*******************************************************************************
@@ -226,9 +228,9 @@
 		/*
 		 * Mutex debug code, for internal debugging only.
 		 *
-		 * Deadlock prevention.  Check if this thread owns any mutexes of value
-		 * greater than or equal to this one.  If so, the thread has violated
-		 * the mutex ordering rule.  This indicates a coding error somewhere in
+		 * Deadlock prevention. Check if this thread owns any mutexes of value
+		 * greater than or equal to this one. If so, the thread has violated
+		 * the mutex ordering rule. This indicates a coding error somewhere in
 		 * the ACPI subsystem code.
 		 */
 		for (i = mutex_id; i < ACPI_NUM_MUTEX; i++) {
@@ -319,9 +321,9 @@
 		/*
 		 * Mutex debug code, for internal debugging only.
 		 *
-		 * Deadlock prevention.  Check if this thread owns any mutexes of value
-		 * greater than this one.  If so, the thread has violated the mutex
-		 * ordering rule.  This indicates a coding error somewhere in
+		 * Deadlock prevention. Check if this thread owns any mutexes of value
+		 * greater than this one. If so, the thread has violated the mutex
+		 * ordering rule. This indicates a coding error somewhere in
 		 * the ACPI subsystem code.
 		 */
 		for (i = mutex_id; i < ACPI_NUM_MUTEX; i++) {
diff --git a/drivers/acpi/acpica/utobject.c b/drivers/acpi/acpica/utobject.c
index 655f079..5c52ca7 100644
--- a/drivers/acpi/acpica/utobject.c
+++ b/drivers/acpi/acpica/utobject.c
@@ -77,7 +77,7 @@
  *
  * NOTE:        We always allocate the worst-case object descriptor because
  *              these objects are cached, and we want them to be
- *              one-size-satisifies-any-request.  This in itself may not be
+ *              one-size-satisifies-any-request. This in itself may not be
  *              the most memory efficient, but the efficiency of the object
  *              cache should more than make up for this!
  *
@@ -370,9 +370,9 @@
  *              line_number         - Caller's line number (for error output)
  *              component_id        - Caller's component ID (for error output)
  *
- * RETURN:      Pointer to newly allocated object descriptor.  Null on error
+ * RETURN:      Pointer to newly allocated object descriptor. Null on error
  *
- * DESCRIPTION: Allocate a new object descriptor.  Gracefully handle
+ * DESCRIPTION: Allocate a new object descriptor. Gracefully handle
  *              error conditions.
  *
  ******************************************************************************/
@@ -554,7 +554,7 @@
 
 	/*
 	 * Account for the space required by the object rounded up to the next
-	 * multiple of the machine word size.  This keeps each object aligned
+	 * multiple of the machine word size. This keeps each object aligned
 	 * on a machine word boundary. (preventing alignment faults on some
 	 * machines.)
 	 */
diff --git a/drivers/acpi/acpica/utstate.c b/drivers/acpi/acpica/utstate.c
index a1c9882..cee0473 100644
--- a/drivers/acpi/acpica/utstate.c
+++ b/drivers/acpi/acpica/utstate.c
@@ -147,7 +147,7 @@
  *
  * RETURN:      The new state object. NULL on failure.
  *
- * DESCRIPTION: Create a generic state object.  Attempt to obtain one from
+ * DESCRIPTION: Create a generic state object. Attempt to obtain one from
  *              the global state cache;  If none available, create a new one.
  *
  ******************************************************************************/
diff --git a/drivers/acpi/acpica/uttrack.c b/drivers/acpi/acpica/uttrack.c
new file mode 100644
index 0000000..a424a9e
--- /dev/null
+++ b/drivers/acpi/acpica/uttrack.c
@@ -0,0 +1,692 @@
+/******************************************************************************
+ *
+ * Module Name: uttrack - Memory allocation tracking routines (debug only)
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2012, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+/*
+ * These procedures are used for tracking memory leaks in the subsystem, and
+ * they get compiled out when the ACPI_DBG_TRACK_ALLOCATIONS is not set.
+ *
+ * Each memory allocation is tracked via a doubly linked list. Each
+ * element contains the caller's component, module name, function name, and
+ * line number. acpi_ut_allocate and acpi_ut_allocate_zeroed call
+ * acpi_ut_track_allocation to add an element to the list; deletion
+ * occurs in the body of acpi_ut_free.
+ */
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+
+#ifdef ACPI_DBG_TRACK_ALLOCATIONS
+
+#define _COMPONENT          ACPI_UTILITIES
+ACPI_MODULE_NAME("uttrack")
+
+/* Local prototypes */
+static struct acpi_debug_mem_block *acpi_ut_find_allocation(struct
+							    acpi_debug_mem_block
+							    *allocation);
+
+static acpi_status
+acpi_ut_track_allocation(struct acpi_debug_mem_block *address,
+			 acpi_size size,
+			 u8 alloc_type,
+			 u32 component, const char *module, u32 line);
+
+static acpi_status
+acpi_ut_remove_allocation(struct acpi_debug_mem_block *address,
+			  u32 component, const char *module, u32 line);
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_create_list
+ *
+ * PARAMETERS:  cache_name      - Ascii name for the cache
+ *              object_size     - Size of each cached object
+ *              return_cache    - Where the new cache object is returned
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Create a local memory list for tracking purposed
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ut_create_list(char *list_name,
+		    u16 object_size, struct acpi_memory_list **return_cache)
+{
+	struct acpi_memory_list *cache;
+
+	cache = acpi_os_allocate(sizeof(struct acpi_memory_list));
+	if (!cache) {
+		return (AE_NO_MEMORY);
+	}
+
+	ACPI_MEMSET(cache, 0, sizeof(struct acpi_memory_list));
+
+	cache->list_name = list_name;
+	cache->object_size = object_size;
+
+	*return_cache = cache;
+	return (AE_OK);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_allocate_and_track
+ *
+ * PARAMETERS:  size                - Size of the allocation
+ *              component           - Component type of caller
+ *              module              - Source file name of caller
+ *              line                - Line number of caller
+ *
+ * RETURN:      Address of the allocated memory on success, NULL on failure.
+ *
+ * DESCRIPTION: The subsystem's equivalent of malloc.
+ *
+ ******************************************************************************/
+
+void *acpi_ut_allocate_and_track(acpi_size size,
+				 u32 component, const char *module, u32 line)
+{
+	struct acpi_debug_mem_block *allocation;
+	acpi_status status;
+
+	allocation =
+	    acpi_ut_allocate(size + sizeof(struct acpi_debug_mem_header),
+			     component, module, line);
+	if (!allocation) {
+		return (NULL);
+	}
+
+	status = acpi_ut_track_allocation(allocation, size,
+					  ACPI_MEM_MALLOC, component, module,
+					  line);
+	if (ACPI_FAILURE(status)) {
+		acpi_os_free(allocation);
+		return (NULL);
+	}
+
+	acpi_gbl_global_list->total_allocated++;
+	acpi_gbl_global_list->total_size += (u32)size;
+	acpi_gbl_global_list->current_total_size += (u32)size;
+	if (acpi_gbl_global_list->current_total_size >
+	    acpi_gbl_global_list->max_occupied) {
+		acpi_gbl_global_list->max_occupied =
+		    acpi_gbl_global_list->current_total_size;
+	}
+
+	return ((void *)&allocation->user_space);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_allocate_zeroed_and_track
+ *
+ * PARAMETERS:  size                - Size of the allocation
+ *              component           - Component type of caller
+ *              module              - Source file name of caller
+ *              line                - Line number of caller
+ *
+ * RETURN:      Address of the allocated memory on success, NULL on failure.
+ *
+ * DESCRIPTION: Subsystem equivalent of calloc.
+ *
+ ******************************************************************************/
+
+void *acpi_ut_allocate_zeroed_and_track(acpi_size size,
+					u32 component,
+					const char *module, u32 line)
+{
+	struct acpi_debug_mem_block *allocation;
+	acpi_status status;
+
+	allocation =
+	    acpi_ut_allocate_zeroed(size + sizeof(struct acpi_debug_mem_header),
+				    component, module, line);
+	if (!allocation) {
+
+		/* Report allocation error */
+
+		ACPI_ERROR((module, line,
+			    "Could not allocate size %u", (u32)size));
+		return (NULL);
+	}
+
+	status = acpi_ut_track_allocation(allocation, size,
+					  ACPI_MEM_CALLOC, component, module,
+					  line);
+	if (ACPI_FAILURE(status)) {
+		acpi_os_free(allocation);
+		return (NULL);
+	}
+
+	acpi_gbl_global_list->total_allocated++;
+	acpi_gbl_global_list->total_size += (u32)size;
+	acpi_gbl_global_list->current_total_size += (u32)size;
+	if (acpi_gbl_global_list->current_total_size >
+	    acpi_gbl_global_list->max_occupied) {
+		acpi_gbl_global_list->max_occupied =
+		    acpi_gbl_global_list->current_total_size;
+	}
+
+	return ((void *)&allocation->user_space);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_free_and_track
+ *
+ * PARAMETERS:  allocation          - Address of the memory to deallocate
+ *              component           - Component type of caller
+ *              module              - Source file name of caller
+ *              line                - Line number of caller
+ *
+ * RETURN:      None
+ *
+ * DESCRIPTION: Frees the memory at Allocation
+ *
+ ******************************************************************************/
+
+void
+acpi_ut_free_and_track(void *allocation,
+		       u32 component, const char *module, u32 line)
+{
+	struct acpi_debug_mem_block *debug_block;
+	acpi_status status;
+
+	ACPI_FUNCTION_TRACE_PTR(ut_free, allocation);
+
+	if (NULL == allocation) {
+		ACPI_ERROR((module, line, "Attempt to delete a NULL address"));
+
+		return_VOID;
+	}
+
+	debug_block = ACPI_CAST_PTR(struct acpi_debug_mem_block,
+				    (((char *)allocation) -
+				     sizeof(struct acpi_debug_mem_header)));
+
+	acpi_gbl_global_list->total_freed++;
+	acpi_gbl_global_list->current_total_size -= debug_block->size;
+
+	status = acpi_ut_remove_allocation(debug_block,
+					   component, module, line);
+	if (ACPI_FAILURE(status)) {
+		ACPI_EXCEPTION((AE_INFO, status, "Could not free memory"));
+	}
+
+	acpi_os_free(debug_block);
+	ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS, "%p freed\n", allocation));
+	return_VOID;
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_find_allocation
+ *
+ * PARAMETERS:  allocation              - Address of allocated memory
+ *
+ * RETURN:      Three cases:
+ *              1) List is empty, NULL is returned.
+ *              2) Element was found. Returns Allocation parameter.
+ *              3) Element was not found. Returns position where it should be
+ *                  inserted into the list.
+ *
+ * DESCRIPTION: Searches for an element in the global allocation tracking list.
+ *              If the element is not found, returns the location within the
+ *              list where the element should be inserted.
+ *
+ *              Note: The list is ordered by larger-to-smaller addresses.
+ *
+ *              This global list is used to detect memory leaks in ACPICA as
+ *              well as other issues such as an attempt to release the same
+ *              internal object more than once. Although expensive as far
+ *              as cpu time, this list is much more helpful for finding these
+ *              types of issues than using memory leak detectors outside of
+ *              the ACPICA code.
+ *
+ ******************************************************************************/
+
+static struct acpi_debug_mem_block *acpi_ut_find_allocation(struct
+							    acpi_debug_mem_block
+							    *allocation)
+{
+	struct acpi_debug_mem_block *element;
+
+	element = acpi_gbl_global_list->list_head;
+	if (!element) {
+		return (NULL);
+	}
+
+	/*
+	 * Search for the address.
+	 *
+	 * Note: List is ordered by larger-to-smaller addresses, on the
+	 * assumption that a new allocation usually has a larger address
+	 * than previous allocations.
+	 */
+	while (element > allocation) {
+
+		/* Check for end-of-list */
+
+		if (!element->next) {
+			return (element);
+		}
+
+		element = element->next;
+	}
+
+	if (element == allocation) {
+		return (element);
+	}
+
+	return (element->previous);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_track_allocation
+ *
+ * PARAMETERS:  allocation          - Address of allocated memory
+ *              size                - Size of the allocation
+ *              alloc_type          - MEM_MALLOC or MEM_CALLOC
+ *              component           - Component type of caller
+ *              module              - Source file name of caller
+ *              line                - Line number of caller
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Inserts an element into the global allocation tracking list.
+ *
+ ******************************************************************************/
+
+static acpi_status
+acpi_ut_track_allocation(struct acpi_debug_mem_block *allocation,
+			 acpi_size size,
+			 u8 alloc_type,
+			 u32 component, const char *module, u32 line)
+{
+	struct acpi_memory_list *mem_list;
+	struct acpi_debug_mem_block *element;
+	acpi_status status = AE_OK;
+
+	ACPI_FUNCTION_TRACE_PTR(ut_track_allocation, allocation);
+
+	if (acpi_gbl_disable_mem_tracking) {
+		return_ACPI_STATUS(AE_OK);
+	}
+
+	mem_list = acpi_gbl_global_list;
+	status = acpi_ut_acquire_mutex(ACPI_MTX_MEMORY);
+	if (ACPI_FAILURE(status)) {
+		return_ACPI_STATUS(status);
+	}
+
+	/*
+	 * Search the global list for this address to make sure it is not
+	 * already present. This will catch several kinds of problems.
+	 */
+	element = acpi_ut_find_allocation(allocation);
+	if (element == allocation) {
+		ACPI_ERROR((AE_INFO,
+			    "UtTrackAllocation: Allocation (%p) already present in global list!",
+			    allocation));
+		goto unlock_and_exit;
+	}
+
+	/* Fill in the instance data */
+
+	allocation->size = (u32)size;
+	allocation->alloc_type = alloc_type;
+	allocation->component = component;
+	allocation->line = line;
+
+	ACPI_STRNCPY(allocation->module, module, ACPI_MAX_MODULE_NAME);
+	allocation->module[ACPI_MAX_MODULE_NAME - 1] = 0;
+
+	if (!element) {
+
+		/* Insert at list head */
+
+		if (mem_list->list_head) {
+			((struct acpi_debug_mem_block *)(mem_list->list_head))->
+			    previous = allocation;
+		}
+
+		allocation->next = mem_list->list_head;
+		allocation->previous = NULL;
+
+		mem_list->list_head = allocation;
+	} else {
+		/* Insert after element */
+
+		allocation->next = element->next;
+		allocation->previous = element;
+
+		if (element->next) {
+			(element->next)->previous = allocation;
+		}
+
+		element->next = allocation;
+	}
+
+      unlock_and_exit:
+	status = acpi_ut_release_mutex(ACPI_MTX_MEMORY);
+	return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_remove_allocation
+ *
+ * PARAMETERS:  allocation          - Address of allocated memory
+ *              component           - Component type of caller
+ *              module              - Source file name of caller
+ *              line                - Line number of caller
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Deletes an element from the global allocation tracking list.
+ *
+ ******************************************************************************/
+
+static acpi_status
+acpi_ut_remove_allocation(struct acpi_debug_mem_block *allocation,
+			  u32 component, const char *module, u32 line)
+{
+	struct acpi_memory_list *mem_list;
+	acpi_status status;
+
+	ACPI_FUNCTION_TRACE(ut_remove_allocation);
+
+	if (acpi_gbl_disable_mem_tracking) {
+		return_ACPI_STATUS(AE_OK);
+	}
+
+	mem_list = acpi_gbl_global_list;
+	if (NULL == mem_list->list_head) {
+
+		/* No allocations! */
+
+		ACPI_ERROR((module, line,
+			    "Empty allocation list, nothing to free!"));
+
+		return_ACPI_STATUS(AE_OK);
+	}
+
+	status = acpi_ut_acquire_mutex(ACPI_MTX_MEMORY);
+	if (ACPI_FAILURE(status)) {
+		return_ACPI_STATUS(status);
+	}
+
+	/* Unlink */
+
+	if (allocation->previous) {
+		(allocation->previous)->next = allocation->next;
+	} else {
+		mem_list->list_head = allocation->next;
+	}
+
+	if (allocation->next) {
+		(allocation->next)->previous = allocation->previous;
+	}
+
+	/* Mark the segment as deleted */
+
+	ACPI_MEMSET(&allocation->user_space, 0xEA, allocation->size);
+
+	ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS, "Freeing size 0%X\n",
+			  allocation->size));
+
+	status = acpi_ut_release_mutex(ACPI_MTX_MEMORY);
+	return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_dump_allocation_info
+ *
+ * PARAMETERS:  None
+ *
+ * RETURN:      None
+ *
+ * DESCRIPTION: Print some info about the outstanding allocations.
+ *
+ ******************************************************************************/
+
+void acpi_ut_dump_allocation_info(void)
+{
+/*
+	struct acpi_memory_list         *mem_list;
+*/
+
+	ACPI_FUNCTION_TRACE(ut_dump_allocation_info);
+
+/*
+	ACPI_DEBUG_PRINT (TRACE_ALLOCATIONS | TRACE_TABLES,
+			  ("%30s: %4d (%3d Kb)\n", "Current allocations",
+			  mem_list->current_count,
+			  ROUND_UP_TO_1K (mem_list->current_size)));
+
+	ACPI_DEBUG_PRINT (TRACE_ALLOCATIONS | TRACE_TABLES,
+			  ("%30s: %4d (%3d Kb)\n", "Max concurrent allocations",
+			  mem_list->max_concurrent_count,
+			  ROUND_UP_TO_1K (mem_list->max_concurrent_size)));
+
+	ACPI_DEBUG_PRINT (TRACE_ALLOCATIONS | TRACE_TABLES,
+			  ("%30s: %4d (%3d Kb)\n", "Total (all) internal objects",
+			  running_object_count,
+			  ROUND_UP_TO_1K (running_object_size)));
+
+	ACPI_DEBUG_PRINT (TRACE_ALLOCATIONS | TRACE_TABLES,
+			  ("%30s: %4d (%3d Kb)\n", "Total (all) allocations",
+			  running_alloc_count,
+			  ROUND_UP_TO_1K (running_alloc_size)));
+
+	ACPI_DEBUG_PRINT (TRACE_ALLOCATIONS | TRACE_TABLES,
+			  ("%30s: %4d (%3d Kb)\n", "Current Nodes",
+			  acpi_gbl_current_node_count,
+			  ROUND_UP_TO_1K (acpi_gbl_current_node_size)));
+
+	ACPI_DEBUG_PRINT (TRACE_ALLOCATIONS | TRACE_TABLES,
+			  ("%30s: %4d (%3d Kb)\n", "Max Nodes",
+			  acpi_gbl_max_concurrent_node_count,
+			  ROUND_UP_TO_1K ((acpi_gbl_max_concurrent_node_count *
+					 sizeof (struct acpi_namespace_node)))));
+*/
+	return_VOID;
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_dump_allocations
+ *
+ * PARAMETERS:  component           - Component(s) to dump info for.
+ *              module              - Module to dump info for. NULL means all.
+ *
+ * RETURN:      None
+ *
+ * DESCRIPTION: Print a list of all outstanding allocations.
+ *
+ ******************************************************************************/
+
+void acpi_ut_dump_allocations(u32 component, const char *module)
+{
+	struct acpi_debug_mem_block *element;
+	union acpi_descriptor *descriptor;
+	u32 num_outstanding = 0;
+	u8 descriptor_type;
+
+	ACPI_FUNCTION_TRACE(ut_dump_allocations);
+
+	if (acpi_gbl_disable_mem_tracking) {
+		return_VOID;
+	}
+
+	/*
+	 * Walk the allocation list.
+	 */
+	if (ACPI_FAILURE(acpi_ut_acquire_mutex(ACPI_MTX_MEMORY))) {
+		return_VOID;
+	}
+
+	element = acpi_gbl_global_list->list_head;
+	while (element) {
+		if ((element->component & component) &&
+		    ((module == NULL)
+		     || (0 == ACPI_STRCMP(module, element->module)))) {
+			descriptor =
+			    ACPI_CAST_PTR(union acpi_descriptor,
+					  &element->user_space);
+
+			if (element->size <
+			    sizeof(struct acpi_common_descriptor)) {
+				acpi_os_printf("%p Length 0x%04X %9.9s-%u "
+					       "[Not a Descriptor - too small]\n",
+					       descriptor, element->size,
+					       element->module, element->line);
+			} else {
+				/* Ignore allocated objects that are in a cache */
+
+				if (ACPI_GET_DESCRIPTOR_TYPE(descriptor) !=
+				    ACPI_DESC_TYPE_CACHED) {
+					acpi_os_printf
+					    ("%p Length 0x%04X %9.9s-%u [%s] ",
+					     descriptor, element->size,
+					     element->module, element->line,
+					     acpi_ut_get_descriptor_name
+					     (descriptor));
+
+					/* Validate the descriptor type using Type field and length */
+
+					descriptor_type = 0;	/* Not a valid descriptor type */
+
+					switch (ACPI_GET_DESCRIPTOR_TYPE
+						(descriptor)) {
+					case ACPI_DESC_TYPE_OPERAND:
+						if (element->size ==
+						    sizeof(union
+							   acpi_operand_object))
+						{
+							descriptor_type =
+							    ACPI_DESC_TYPE_OPERAND;
+						}
+						break;
+
+					case ACPI_DESC_TYPE_PARSER:
+						if (element->size ==
+						    sizeof(union
+							   acpi_parse_object)) {
+							descriptor_type =
+							    ACPI_DESC_TYPE_PARSER;
+						}
+						break;
+
+					case ACPI_DESC_TYPE_NAMED:
+						if (element->size ==
+						    sizeof(struct
+							   acpi_namespace_node))
+						{
+							descriptor_type =
+							    ACPI_DESC_TYPE_NAMED;
+						}
+						break;
+
+					default:
+						break;
+					}
+
+					/* Display additional info for the major descriptor types */
+
+					switch (descriptor_type) {
+					case ACPI_DESC_TYPE_OPERAND:
+						acpi_os_printf
+						    ("%12.12s RefCount 0x%04X\n",
+						     acpi_ut_get_type_name
+						     (descriptor->object.common.
+						      type),
+						     descriptor->object.common.
+						     reference_count);
+						break;
+
+					case ACPI_DESC_TYPE_PARSER:
+						acpi_os_printf
+						    ("AmlOpcode 0x%04hX\n",
+						     descriptor->op.asl.
+						     aml_opcode);
+						break;
+
+					case ACPI_DESC_TYPE_NAMED:
+						acpi_os_printf("%4.4s\n",
+							       acpi_ut_get_node_name
+							       (&descriptor->
+								node));
+						break;
+
+					default:
+						acpi_os_printf("\n");
+						break;
+					}
+				}
+			}
+
+			num_outstanding++;
+		}
+
+		element = element->next;
+	}
+
+	(void)acpi_ut_release_mutex(ACPI_MTX_MEMORY);
+
+	/* Print summary */
+
+	if (!num_outstanding) {
+		ACPI_INFO((AE_INFO, "No outstanding allocations"));
+	} else {
+		ACPI_ERROR((AE_INFO, "%u(0x%X) Outstanding allocations",
+			    num_outstanding, num_outstanding));
+	}
+
+	return_VOID;
+}
+
+#endif				/* ACPI_DBG_TRACK_ALLOCATIONS */
diff --git a/drivers/acpi/acpica/utxface.c b/drivers/acpi/acpica/utxface.c
index b09632b..390db0c 100644
--- a/drivers/acpi/acpica/utxface.c
+++ b/drivers/acpi/acpica/utxface.c
@@ -147,7 +147,7 @@
  * RETURN:      status          - the status of the call
  *
  * DESCRIPTION: This function is called to get information about the current
- *              state of the ACPI subsystem.  It will return system information
+ *              state of the ACPI subsystem. It will return system information
  *              in the out_buffer.
  *
  *              If the function fails an appropriate status will be returned
@@ -238,7 +238,7 @@
 	}
 
 	acpi_gbl_init_handler = handler;
-	return AE_OK;
+	return (AE_OK);
 }
 
 ACPI_EXPORT_SYMBOL(acpi_install_initialization_handler)
@@ -263,6 +263,7 @@
 	(void)acpi_os_purge_cache(acpi_gbl_operand_cache);
 	(void)acpi_os_purge_cache(acpi_gbl_ps_node_cache);
 	(void)acpi_os_purge_cache(acpi_gbl_ps_node_ext_cache);
+
 	return_ACPI_STATUS(AE_OK);
 }
 
diff --git a/drivers/acpi/acpica/utxferror.c b/drivers/acpi/acpica/utxferror.c
index 6d63cc3..d4d3826 100644
--- a/drivers/acpi/acpica/utxferror.c
+++ b/drivers/acpi/acpica/utxferror.c
@@ -408,7 +408,7 @@
 
 		ACPI_MOVE_32_TO_32(&bad_name,
 				   ACPI_CAST_PTR(u32, internal_name));
-		acpi_os_printf("[0x%4.4X] (NON-ASCII)", bad_name);
+		acpi_os_printf("[0x%.8X] (NON-ASCII)", bad_name);
 	} else {
 		/* Convert path to external format */
 
diff --git a/drivers/acpi/apei/ghes.c b/drivers/acpi/apei/ghes.c
index 73bca11..7ae2750 100644
--- a/drivers/acpi/apei/ghes.c
+++ b/drivers/acpi/apei/ghes.c
@@ -994,7 +994,7 @@
 	return rc;
 }
 
-static int __devexit ghes_remove(struct platform_device *ghes_dev)
+static int ghes_remove(struct platform_device *ghes_dev)
 {
 	struct ghes *ghes;
 	struct acpi_hest_generic *generic;
diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c
index 45e3e17..7efaeaa 100644
--- a/drivers/acpi/battery.c
+++ b/drivers/acpi/battery.c
@@ -34,6 +34,7 @@
 #include <linux/dmi.h>
 #include <linux/slab.h>
 #include <linux/suspend.h>
+#include <asm/unaligned.h>
 
 #ifdef CONFIG_ACPI_PROCFS_POWER
 #include <linux/proc_fs.h>
@@ -95,6 +96,18 @@
 	ACPI_BATTERY_ALARM_PRESENT,
 	ACPI_BATTERY_XINFO_PRESENT,
 	ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY,
+	/* On Lenovo Thinkpad models from 2010 and 2011, the power unit
+	   switches between mWh and mAh depending on whether the system
+	   is running on battery or not.  When mAh is the unit, most
+	   reported values are incorrect and need to be adjusted by
+	   10000/design_voltage.  Verified on x201, t410, t410s, and x220.
+	   Pre-2010 and 2012 models appear to always report in mWh and
+	   are thus unaffected (tested with t42, t61, t500, x200, x300,
+	   and x230).  Also, in mid-2012 Lenovo issued a BIOS update for
+	   the 2011 models that fixes the issue (tested on x220 with a
+	   post-1.29 BIOS), but as of Nov. 2012, no such update is
+	   available for the 2010 models.  */
+	ACPI_BATTERY_QUIRK_THINKPAD_MAH,
 };
 
 struct acpi_battery {
@@ -438,6 +451,21 @@
 	kfree(buffer.pointer);
 	if (test_bit(ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY, &battery->flags))
 		battery->full_charge_capacity = battery->design_capacity;
+	if (test_bit(ACPI_BATTERY_QUIRK_THINKPAD_MAH, &battery->flags) &&
+	    battery->power_unit && battery->design_voltage) {
+		battery->design_capacity = battery->design_capacity *
+		    10000 / battery->design_voltage;
+		battery->full_charge_capacity = battery->full_charge_capacity *
+		    10000 / battery->design_voltage;
+		battery->design_capacity_warning =
+		    battery->design_capacity_warning *
+		    10000 / battery->design_voltage;
+		/* Curiously, design_capacity_low, unlike the rest of them,
+		   is correct.  */
+		/* capacity_granularity_* equal 1 on the systems tested, so
+		   it's impossible to tell if they would need an adjustment
+		   or not if their values were higher.  */
+	}
 	return result;
 }
 
@@ -486,6 +514,11 @@
 	    && battery->capacity_now >= 0 && battery->capacity_now <= 100)
 		battery->capacity_now = (battery->capacity_now *
 				battery->full_charge_capacity) / 100;
+	if (test_bit(ACPI_BATTERY_QUIRK_THINKPAD_MAH, &battery->flags) &&
+	    battery->power_unit && battery->design_voltage) {
+		battery->capacity_now = battery->capacity_now *
+		    10000 / battery->design_voltage;
+	}
 	return result;
 }
 
@@ -595,6 +628,24 @@
 	mutex_unlock(&battery->sysfs_lock);
 }
 
+static void find_battery(const struct dmi_header *dm, void *private)
+{
+	struct acpi_battery *battery = (struct acpi_battery *)private;
+	/* Note: the hardcoded offsets below have been extracted from
+	   the source code of dmidecode.  */
+	if (dm->type == DMI_ENTRY_PORTABLE_BATTERY && dm->length >= 8) {
+		const u8 *dmi_data = (const u8 *)(dm + 1);
+		int dmi_capacity = get_unaligned((const u16 *)(dmi_data + 6));
+		if (dm->length >= 18)
+			dmi_capacity *= dmi_data[17];
+		if (battery->design_capacity * battery->design_voltage / 1000
+		    != dmi_capacity &&
+		    battery->design_capacity * 10 == dmi_capacity)
+			set_bit(ACPI_BATTERY_QUIRK_THINKPAD_MAH,
+				&battery->flags);
+	}
+}
+
 /*
  * According to the ACPI spec, some kinds of primary batteries can
  * report percentage battery remaining capacity directly to OS.
@@ -620,6 +671,32 @@
 		battery->capacity_now = (battery->capacity_now *
 				battery->full_charge_capacity) / 100;
 	}
+
+	if (test_bit(ACPI_BATTERY_QUIRK_THINKPAD_MAH, &battery->flags))
+		return ;
+
+	if (battery->power_unit && dmi_name_in_vendors("LENOVO")) {
+		const char *s;
+		s = dmi_get_system_info(DMI_PRODUCT_VERSION);
+		if (s && !strnicmp(s, "ThinkPad", 8)) {
+			dmi_walk(find_battery, battery);
+			if (test_bit(ACPI_BATTERY_QUIRK_THINKPAD_MAH,
+				     &battery->flags) &&
+			    battery->design_voltage) {
+				battery->design_capacity =
+				    battery->design_capacity *
+				    10000 / battery->design_voltage;
+				battery->full_charge_capacity =
+				    battery->full_charge_capacity *
+				    10000 / battery->design_voltage;
+				battery->design_capacity_warning =
+				    battery->design_capacity_warning *
+				    10000 / battery->design_voltage;
+				battery->capacity_now = battery->capacity_now *
+				    10000 / battery->design_voltage;
+			}
+		}
+	}
 }
 
 static int acpi_battery_update(struct acpi_battery *battery)
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index d59175e..1f0d457 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -257,7 +257,15 @@
 }
 
 
-static int __acpi_bus_set_power(struct acpi_device *device, int state)
+/**
+ * acpi_device_set_power - Set power state of an ACPI device.
+ * @device: Device to set the power state of.
+ * @state: New power state to set.
+ *
+ * Callers must ensure that the device is power manageable before using this
+ * function.
+ */
+int acpi_device_set_power(struct acpi_device *device, int state)
 {
 	int result = 0;
 	acpi_status status = AE_OK;
@@ -298,6 +306,12 @@
 	 * a lower-powered state.
 	 */
 	if (state < device->power.state) {
+		if (device->power.state >= ACPI_STATE_D3_HOT &&
+		    state != ACPI_STATE_D0) {
+			printk(KERN_WARNING PREFIX
+			      "Cannot transition to non-D0 state from D3\n");
+			return -ENODEV;
+		}
 		if (device->power.flags.power_resources) {
 			result = acpi_power_transition(device, state);
 			if (result)
@@ -341,6 +355,7 @@
 
 	return result;
 }
+EXPORT_SYMBOL(acpi_device_set_power);
 
 
 int acpi_bus_set_power(acpi_handle handle, int state)
@@ -359,7 +374,7 @@
 		return -ENODEV;
 	}
 
-	return __acpi_bus_set_power(device, state);
+	return acpi_device_set_power(device, state);
 }
 EXPORT_SYMBOL(acpi_bus_set_power);
 
@@ -402,7 +417,7 @@
 	if (result)
 		return result;
 
-	result = __acpi_bus_set_power(device, state);
+	result = acpi_device_set_power(device, state);
 	if (!result && state_p)
 		*state_p = state;
 
diff --git a/drivers/acpi/container.c b/drivers/acpi/container.c
index 1f9f7d7..811910b 100644
--- a/drivers/acpi/container.c
+++ b/drivers/acpi/container.c
@@ -92,17 +92,24 @@
 	return ((sta & ACPI_STA_DEVICE_PRESENT) == ACPI_STA_DEVICE_PRESENT);
 }
 
+static bool is_container_device(const char *hid)
+{
+	const struct acpi_device_id *container_id;
+
+	for (container_id = container_device_ids;
+	     container_id->id[0]; container_id++) {
+		if (!strcmp((char *)container_id->id, hid))
+			return true;
+	}
+
+	return false;
+}
+
 /*******************************************************************/
 static int acpi_container_add(struct acpi_device *device)
 {
 	struct acpi_container *container;
 
-
-	if (!device) {
-		printk(KERN_ERR PREFIX "device is NULL\n");
-		return -EINVAL;
-	}
-
 	container = kzalloc(sizeof(struct acpi_container), GFP_KERNEL);
 	if (!container)
 		return -ENOMEM;
@@ -164,7 +171,7 @@
 	case ACPI_NOTIFY_BUS_CHECK:
 		/* Fall through */
 	case ACPI_NOTIFY_DEVICE_CHECK:
-		printk(KERN_WARNING "Container driver received %s event\n",
+		pr_debug("Container driver received %s event\n",
 		       (type == ACPI_NOTIFY_BUS_CHECK) ?
 		       "ACPI_NOTIFY_BUS_CHECK" : "ACPI_NOTIFY_DEVICE_CHECK");
 
@@ -185,7 +192,7 @@
 
 		result = container_device_add(&device, handle);
 		if (result) {
-			printk(KERN_WARNING "Failed to add container\n");
+			acpi_handle_warn(handle, "Failed to add container\n");
 			break;
 		}
 
@@ -232,10 +239,8 @@
 		goto end;
 	}
 
-	if (strcmp(hid, "ACPI0004") && strcmp(hid, "PNP0A05") &&
-	    strcmp(hid, "PNP0A06")) {
+	if (!is_container_device(hid))
 		goto end;
-	}
 
 	switch (*action) {
 	case INSTALL_NOTIFY_HANDLER:
diff --git a/drivers/acpi/device_pm.c b/drivers/acpi/device_pm.c
new file mode 100644
index 0000000..f09dc98
--- /dev/null
+++ b/drivers/acpi/device_pm.c
@@ -0,0 +1,668 @@
+/*
+ * drivers/acpi/device_pm.c - ACPI device power management routines.
+ *
+ * Copyright (C) 2012, Intel Corp.
+ * Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope that it will be useful, but
+ *  WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+#include <linux/device.h>
+#include <linux/export.h>
+#include <linux/mutex.h>
+#include <linux/pm_qos.h>
+#include <linux/pm_runtime.h>
+
+#include <acpi/acpi.h>
+#include <acpi/acpi_bus.h>
+
+static DEFINE_MUTEX(acpi_pm_notifier_lock);
+
+/**
+ * acpi_add_pm_notifier - Register PM notifier for given ACPI device.
+ * @adev: ACPI device to add the notifier for.
+ * @context: Context information to pass to the notifier routine.
+ *
+ * NOTE: @adev need not be a run-wake or wakeup device to be a valid source of
+ * PM wakeup events.  For example, wakeup events may be generated for bridges
+ * if one of the devices below the bridge is signaling wakeup, even if the
+ * bridge itself doesn't have a wakeup GPE associated with it.
+ */
+acpi_status acpi_add_pm_notifier(struct acpi_device *adev,
+				 acpi_notify_handler handler, void *context)
+{
+	acpi_status status = AE_ALREADY_EXISTS;
+
+	mutex_lock(&acpi_pm_notifier_lock);
+
+	if (adev->wakeup.flags.notifier_present)
+		goto out;
+
+	status = acpi_install_notify_handler(adev->handle,
+					     ACPI_SYSTEM_NOTIFY,
+					     handler, context);
+	if (ACPI_FAILURE(status))
+		goto out;
+
+	adev->wakeup.flags.notifier_present = true;
+
+ out:
+	mutex_unlock(&acpi_pm_notifier_lock);
+	return status;
+}
+
+/**
+ * acpi_remove_pm_notifier - Unregister PM notifier from given ACPI device.
+ * @adev: ACPI device to remove the notifier from.
+ */
+acpi_status acpi_remove_pm_notifier(struct acpi_device *adev,
+				    acpi_notify_handler handler)
+{
+	acpi_status status = AE_BAD_PARAMETER;
+
+	mutex_lock(&acpi_pm_notifier_lock);
+
+	if (!adev->wakeup.flags.notifier_present)
+		goto out;
+
+	status = acpi_remove_notify_handler(adev->handle,
+					    ACPI_SYSTEM_NOTIFY,
+					    handler);
+	if (ACPI_FAILURE(status))
+		goto out;
+
+	adev->wakeup.flags.notifier_present = false;
+
+ out:
+	mutex_unlock(&acpi_pm_notifier_lock);
+	return status;
+}
+
+/**
+ * acpi_device_power_state - Get preferred power state of ACPI device.
+ * @dev: Device whose preferred target power state to return.
+ * @adev: ACPI device node corresponding to @dev.
+ * @target_state: System state to match the resultant device state.
+ * @d_max_in: Deepest low-power state to take into consideration.
+ * @d_min_p: Location to store the upper limit of the allowed states range.
+ * Return value: Preferred power state of the device on success, -ENODEV
+ * (if there's no 'struct acpi_device' for @dev) or -EINVAL on failure
+ *
+ * Find the lowest power (highest number) ACPI device power state that the
+ * device can be in while the system is in the state represented by
+ * @target_state.  If @d_min_p is set, the highest power (lowest number) device
+ * power state that @dev can be in for the given system sleep state is stored
+ * at the location pointed to by it.
+ *
+ * Callers must ensure that @dev and @adev are valid pointers and that @adev
+ * actually corresponds to @dev before using this function.
+ */
+int acpi_device_power_state(struct device *dev, struct acpi_device *adev,
+			    u32 target_state, int d_max_in, int *d_min_p)
+{
+	char acpi_method[] = "_SxD";
+	unsigned long long d_min, d_max;
+	bool wakeup = false;
+
+	if (d_max_in < ACPI_STATE_D0 || d_max_in > ACPI_STATE_D3)
+		return -EINVAL;
+
+	if (d_max_in > ACPI_STATE_D3_HOT) {
+		enum pm_qos_flags_status stat;
+
+		stat = dev_pm_qos_flags(dev, PM_QOS_FLAG_NO_POWER_OFF);
+		if (stat == PM_QOS_FLAGS_ALL)
+			d_max_in = ACPI_STATE_D3_HOT;
+	}
+
+	acpi_method[2] = '0' + target_state;
+	/*
+	 * If the sleep state is S0, the lowest limit from ACPI is D3,
+	 * but if the device has _S0W, we will use the value from _S0W
+	 * as the lowest limit from ACPI.  Finally, we will constrain
+	 * the lowest limit with the specified one.
+	 */
+	d_min = ACPI_STATE_D0;
+	d_max = ACPI_STATE_D3;
+
+	/*
+	 * If present, _SxD methods return the minimum D-state (highest power
+	 * state) we can use for the corresponding S-states.  Otherwise, the
+	 * minimum D-state is D0 (ACPI 3.x).
+	 *
+	 * NOTE: We rely on acpi_evaluate_integer() not clobbering the integer
+	 * provided -- that's our fault recovery, we ignore retval.
+	 */
+	if (target_state > ACPI_STATE_S0) {
+		acpi_evaluate_integer(adev->handle, acpi_method, NULL, &d_min);
+		wakeup = device_may_wakeup(dev) && adev->wakeup.flags.valid
+			&& adev->wakeup.sleep_state >= target_state;
+	} else if (dev_pm_qos_flags(dev, PM_QOS_FLAG_REMOTE_WAKEUP) !=
+			PM_QOS_FLAGS_NONE) {
+		wakeup = adev->wakeup.flags.valid;
+	}
+
+	/*
+	 * If _PRW says we can wake up the system from the target sleep state,
+	 * the D-state returned by _SxD is sufficient for that (we assume a
+	 * wakeup-aware driver if wake is set).  Still, if _SxW exists
+	 * (ACPI 3.x), it should return the maximum (lowest power) D-state that
+	 * can wake the system.  _S0W may be valid, too.
+	 */
+	if (wakeup) {
+		acpi_status status;
+
+		acpi_method[3] = 'W';
+		status = acpi_evaluate_integer(adev->handle, acpi_method, NULL,
+						&d_max);
+		if (ACPI_FAILURE(status)) {
+			if (target_state != ACPI_STATE_S0 ||
+			    status != AE_NOT_FOUND)
+				d_max = d_min;
+		} else if (d_max < d_min) {
+			/* Warn the user of the broken DSDT */
+			printk(KERN_WARNING "ACPI: Wrong value from %s\n",
+				acpi_method);
+			/* Sanitize it */
+			d_min = d_max;
+		}
+	}
+
+	if (d_max_in < d_min)
+		return -EINVAL;
+	if (d_min_p)
+		*d_min_p = d_min;
+	/* constrain d_max with specified lowest limit (max number) */
+	if (d_max > d_max_in) {
+		for (d_max = d_max_in; d_max > d_min; d_max--) {
+			if (adev->power.states[d_max].flags.valid)
+				break;
+		}
+	}
+	return d_max;
+}
+EXPORT_SYMBOL_GPL(acpi_device_power_state);
+
+/**
+ * acpi_pm_device_sleep_state - Get preferred power state of ACPI device.
+ * @dev: Device whose preferred target power state to return.
+ * @d_min_p: Location to store the upper limit of the allowed states range.
+ * @d_max_in: Deepest low-power state to take into consideration.
+ * Return value: Preferred power state of the device on success, -ENODEV
+ * (if there's no 'struct acpi_device' for @dev) or -EINVAL on failure
+ *
+ * The caller must ensure that @dev is valid before using this function.
+ */
+int acpi_pm_device_sleep_state(struct device *dev, int *d_min_p, int d_max_in)
+{
+	acpi_handle handle = DEVICE_ACPI_HANDLE(dev);
+	struct acpi_device *adev;
+
+	if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) {
+		dev_dbg(dev, "ACPI handle without context in %s!\n", __func__);
+		return -ENODEV;
+	}
+
+	return acpi_device_power_state(dev, adev, acpi_target_system_state(),
+				       d_max_in, d_min_p);
+}
+EXPORT_SYMBOL(acpi_pm_device_sleep_state);
+
+#ifdef CONFIG_PM_RUNTIME
+/**
+ * acpi_wakeup_device - Wakeup notification handler for ACPI devices.
+ * @handle: ACPI handle of the device the notification is for.
+ * @event: Type of the signaled event.
+ * @context: Device corresponding to @handle.
+ */
+static void acpi_wakeup_device(acpi_handle handle, u32 event, void *context)
+{
+	struct device *dev = context;
+
+	if (event == ACPI_NOTIFY_DEVICE_WAKE && dev) {
+		pm_wakeup_event(dev, 0);
+		pm_runtime_resume(dev);
+	}
+}
+
+/**
+ * __acpi_device_run_wake - Enable/disable runtime remote wakeup for device.
+ * @adev: ACPI device to enable/disable the remote wakeup for.
+ * @enable: Whether to enable or disable the wakeup functionality.
+ *
+ * Enable/disable the GPE associated with @adev so that it can generate
+ * wakeup signals for the device in response to external (remote) events and
+ * enable/disable device wakeup power.
+ *
+ * Callers must ensure that @adev is a valid ACPI device node before executing
+ * this function.
+ */
+int __acpi_device_run_wake(struct acpi_device *adev, bool enable)
+{
+	struct acpi_device_wakeup *wakeup = &adev->wakeup;
+
+	if (enable) {
+		acpi_status res;
+		int error;
+
+		error = acpi_enable_wakeup_device_power(adev, ACPI_STATE_S0);
+		if (error)
+			return error;
+
+		res = acpi_enable_gpe(wakeup->gpe_device, wakeup->gpe_number);
+		if (ACPI_FAILURE(res)) {
+			acpi_disable_wakeup_device_power(adev);
+			return -EIO;
+		}
+	} else {
+		acpi_disable_gpe(wakeup->gpe_device, wakeup->gpe_number);
+		acpi_disable_wakeup_device_power(adev);
+	}
+	return 0;
+}
+
+/**
+ * acpi_pm_device_run_wake - Enable/disable remote wakeup for given device.
+ * @dev: Device to enable/disable the platform to wake up.
+ * @enable: Whether to enable or disable the wakeup functionality.
+ */
+int acpi_pm_device_run_wake(struct device *phys_dev, bool enable)
+{
+	struct acpi_device *adev;
+	acpi_handle handle;
+
+	if (!device_run_wake(phys_dev))
+		return -EINVAL;
+
+	handle = DEVICE_ACPI_HANDLE(phys_dev);
+	if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) {
+		dev_dbg(phys_dev, "ACPI handle without context in %s!\n",
+			__func__);
+		return -ENODEV;
+	}
+
+	return __acpi_device_run_wake(adev, enable);
+}
+EXPORT_SYMBOL(acpi_pm_device_run_wake);
+#else
+static inline void acpi_wakeup_device(acpi_handle handle, u32 event,
+				      void *context) {}
+#endif /* CONFIG_PM_RUNTIME */
+
+ #ifdef CONFIG_PM_SLEEP
+/**
+ * __acpi_device_sleep_wake - Enable or disable device to wake up the system.
+ * @dev: Device to enable/desible to wake up the system.
+ * @target_state: System state the device is supposed to wake up from.
+ * @enable: Whether to enable or disable @dev to wake up the system.
+ */
+int __acpi_device_sleep_wake(struct acpi_device *adev, u32 target_state,
+			     bool enable)
+{
+	return enable ?
+		acpi_enable_wakeup_device_power(adev, target_state) :
+		acpi_disable_wakeup_device_power(adev);
+}
+
+/**
+ * acpi_pm_device_sleep_wake - Enable or disable device to wake up the system.
+ * @dev: Device to enable/desible to wake up the system from sleep states.
+ * @enable: Whether to enable or disable @dev to wake up the system.
+ */
+int acpi_pm_device_sleep_wake(struct device *dev, bool enable)
+{
+	acpi_handle handle;
+	struct acpi_device *adev;
+	int error;
+
+	if (!device_can_wakeup(dev))
+		return -EINVAL;
+
+	handle = DEVICE_ACPI_HANDLE(dev);
+	if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) {
+		dev_dbg(dev, "ACPI handle without context in %s!\n", __func__);
+		return -ENODEV;
+	}
+
+	error = __acpi_device_sleep_wake(adev, acpi_target_system_state(),
+					 enable);
+	if (!error)
+		dev_info(dev, "System wakeup %s by ACPI\n",
+				enable ? "enabled" : "disabled");
+
+	return error;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+/**
+ * acpi_dev_pm_get_node - Get ACPI device node for the given physical device.
+ * @dev: Device to get the ACPI node for.
+ */
+static struct acpi_device *acpi_dev_pm_get_node(struct device *dev)
+{
+	acpi_handle handle = DEVICE_ACPI_HANDLE(dev);
+	struct acpi_device *adev;
+
+	return handle && ACPI_SUCCESS(acpi_bus_get_device(handle, &adev)) ?
+		adev : NULL;
+}
+
+/**
+ * acpi_dev_pm_low_power - Put ACPI device into a low-power state.
+ * @dev: Device to put into a low-power state.
+ * @adev: ACPI device node corresponding to @dev.
+ * @system_state: System state to choose the device state for.
+ */
+static int acpi_dev_pm_low_power(struct device *dev, struct acpi_device *adev,
+				 u32 system_state)
+{
+	int power_state;
+
+	if (!acpi_device_power_manageable(adev))
+		return 0;
+
+	power_state = acpi_device_power_state(dev, adev, system_state,
+					      ACPI_STATE_D3, NULL);
+	if (power_state < ACPI_STATE_D0 || power_state > ACPI_STATE_D3)
+		return -EIO;
+
+	return acpi_device_set_power(adev, power_state);
+}
+
+/**
+ * acpi_dev_pm_full_power - Put ACPI device into the full-power state.
+ * @adev: ACPI device node to put into the full-power state.
+ */
+static int acpi_dev_pm_full_power(struct acpi_device *adev)
+{
+	return acpi_device_power_manageable(adev) ?
+		acpi_device_set_power(adev, ACPI_STATE_D0) : 0;
+}
+
+#ifdef CONFIG_PM_RUNTIME
+/**
+ * acpi_dev_runtime_suspend - Put device into a low-power state using ACPI.
+ * @dev: Device to put into a low-power state.
+ *
+ * Put the given device into a runtime low-power state using the standard ACPI
+ * mechanism.  Set up remote wakeup if desired, choose the state to put the
+ * device into (this checks if remote wakeup is expected to work too), and set
+ * the power state of the device.
+ */
+int acpi_dev_runtime_suspend(struct device *dev)
+{
+	struct acpi_device *adev = acpi_dev_pm_get_node(dev);
+	bool remote_wakeup;
+	int error;
+
+	if (!adev)
+		return 0;
+
+	remote_wakeup = dev_pm_qos_flags(dev, PM_QOS_FLAG_REMOTE_WAKEUP) >
+				PM_QOS_FLAGS_NONE;
+	error = __acpi_device_run_wake(adev, remote_wakeup);
+	if (remote_wakeup && error)
+		return -EAGAIN;
+
+	error = acpi_dev_pm_low_power(dev, adev, ACPI_STATE_S0);
+	if (error)
+		__acpi_device_run_wake(adev, false);
+
+	return error;
+}
+EXPORT_SYMBOL_GPL(acpi_dev_runtime_suspend);
+
+/**
+ * acpi_dev_runtime_resume - Put device into the full-power state using ACPI.
+ * @dev: Device to put into the full-power state.
+ *
+ * Put the given device into the full-power state using the standard ACPI
+ * mechanism at run time.  Set the power state of the device to ACPI D0 and
+ * disable remote wakeup.
+ */
+int acpi_dev_runtime_resume(struct device *dev)
+{
+	struct acpi_device *adev = acpi_dev_pm_get_node(dev);
+	int error;
+
+	if (!adev)
+		return 0;
+
+	error = acpi_dev_pm_full_power(adev);
+	__acpi_device_run_wake(adev, false);
+	return error;
+}
+EXPORT_SYMBOL_GPL(acpi_dev_runtime_resume);
+
+/**
+ * acpi_subsys_runtime_suspend - Suspend device using ACPI.
+ * @dev: Device to suspend.
+ *
+ * Carry out the generic runtime suspend procedure for @dev and use ACPI to put
+ * it into a runtime low-power state.
+ */
+int acpi_subsys_runtime_suspend(struct device *dev)
+{
+	int ret = pm_generic_runtime_suspend(dev);
+	return ret ? ret : acpi_dev_runtime_suspend(dev);
+}
+EXPORT_SYMBOL_GPL(acpi_subsys_runtime_suspend);
+
+/**
+ * acpi_subsys_runtime_resume - Resume device using ACPI.
+ * @dev: Device to Resume.
+ *
+ * Use ACPI to put the given device into the full-power state and carry out the
+ * generic runtime resume procedure for it.
+ */
+int acpi_subsys_runtime_resume(struct device *dev)
+{
+	int ret = acpi_dev_runtime_resume(dev);
+	return ret ? ret : pm_generic_runtime_resume(dev);
+}
+EXPORT_SYMBOL_GPL(acpi_subsys_runtime_resume);
+#endif /* CONFIG_PM_RUNTIME */
+
+#ifdef CONFIG_PM_SLEEP
+/**
+ * acpi_dev_suspend_late - Put device into a low-power state using ACPI.
+ * @dev: Device to put into a low-power state.
+ *
+ * Put the given device into a low-power state during system transition to a
+ * sleep state using the standard ACPI mechanism.  Set up system wakeup if
+ * desired, choose the state to put the device into (this checks if system
+ * wakeup is expected to work too), and set the power state of the device.
+ */
+int acpi_dev_suspend_late(struct device *dev)
+{
+	struct acpi_device *adev = acpi_dev_pm_get_node(dev);
+	u32 target_state;
+	bool wakeup;
+	int error;
+
+	if (!adev)
+		return 0;
+
+	target_state = acpi_target_system_state();
+	wakeup = device_may_wakeup(dev);
+	error = __acpi_device_sleep_wake(adev, target_state, wakeup);
+	if (wakeup && error)
+		return error;
+
+	error = acpi_dev_pm_low_power(dev, adev, target_state);
+	if (error)
+		__acpi_device_sleep_wake(adev, ACPI_STATE_UNKNOWN, false);
+
+	return error;
+}
+EXPORT_SYMBOL_GPL(acpi_dev_suspend_late);
+
+/**
+ * acpi_dev_resume_early - Put device into the full-power state using ACPI.
+ * @dev: Device to put into the full-power state.
+ *
+ * Put the given device into the full-power state using the standard ACPI
+ * mechanism during system transition to the working state.  Set the power
+ * state of the device to ACPI D0 and disable remote wakeup.
+ */
+int acpi_dev_resume_early(struct device *dev)
+{
+	struct acpi_device *adev = acpi_dev_pm_get_node(dev);
+	int error;
+
+	if (!adev)
+		return 0;
+
+	error = acpi_dev_pm_full_power(adev);
+	__acpi_device_sleep_wake(adev, ACPI_STATE_UNKNOWN, false);
+	return error;
+}
+EXPORT_SYMBOL_GPL(acpi_dev_resume_early);
+
+/**
+ * acpi_subsys_prepare - Prepare device for system transition to a sleep state.
+ * @dev: Device to prepare.
+ */
+int acpi_subsys_prepare(struct device *dev)
+{
+	/*
+	 * Follow PCI and resume devices suspended at run time before running
+	 * their system suspend callbacks.
+	 */
+	pm_runtime_resume(dev);
+	return pm_generic_prepare(dev);
+}
+EXPORT_SYMBOL_GPL(acpi_subsys_prepare);
+
+/**
+ * acpi_subsys_suspend_late - Suspend device using ACPI.
+ * @dev: Device to suspend.
+ *
+ * Carry out the generic late suspend procedure for @dev and use ACPI to put
+ * it into a low-power state during system transition into a sleep state.
+ */
+int acpi_subsys_suspend_late(struct device *dev)
+{
+	int ret = pm_generic_suspend_late(dev);
+	return ret ? ret : acpi_dev_suspend_late(dev);
+}
+EXPORT_SYMBOL_GPL(acpi_subsys_suspend_late);
+
+/**
+ * acpi_subsys_resume_early - Resume device using ACPI.
+ * @dev: Device to Resume.
+ *
+ * Use ACPI to put the given device into the full-power state and carry out the
+ * generic early resume procedure for it during system transition into the
+ * working state.
+ */
+int acpi_subsys_resume_early(struct device *dev)
+{
+	int ret = acpi_dev_resume_early(dev);
+	return ret ? ret : pm_generic_resume_early(dev);
+}
+EXPORT_SYMBOL_GPL(acpi_subsys_resume_early);
+#endif /* CONFIG_PM_SLEEP */
+
+static struct dev_pm_domain acpi_general_pm_domain = {
+	.ops = {
+#ifdef CONFIG_PM_RUNTIME
+		.runtime_suspend = acpi_subsys_runtime_suspend,
+		.runtime_resume = acpi_subsys_runtime_resume,
+		.runtime_idle = pm_generic_runtime_idle,
+#endif
+#ifdef CONFIG_PM_SLEEP
+		.prepare = acpi_subsys_prepare,
+		.suspend_late = acpi_subsys_suspend_late,
+		.resume_early = acpi_subsys_resume_early,
+		.poweroff_late = acpi_subsys_suspend_late,
+		.restore_early = acpi_subsys_resume_early,
+#endif
+	},
+};
+
+/**
+ * acpi_dev_pm_attach - Prepare device for ACPI power management.
+ * @dev: Device to prepare.
+ * @power_on: Whether or not to power on the device.
+ *
+ * If @dev has a valid ACPI handle that has a valid struct acpi_device object
+ * attached to it, install a wakeup notification handler for the device and
+ * add it to the general ACPI PM domain.  If @power_on is set, the device will
+ * be put into the ACPI D0 state before the function returns.
+ *
+ * This assumes that the @dev's bus type uses generic power management callbacks
+ * (or doesn't use any power management callbacks at all).
+ *
+ * Callers must ensure proper synchronization of this function with power
+ * management callbacks.
+ */
+int acpi_dev_pm_attach(struct device *dev, bool power_on)
+{
+	struct acpi_device *adev = acpi_dev_pm_get_node(dev);
+
+	if (!adev)
+		return -ENODEV;
+
+	if (dev->pm_domain)
+		return -EEXIST;
+
+	acpi_add_pm_notifier(adev, acpi_wakeup_device, dev);
+	dev->pm_domain = &acpi_general_pm_domain;
+	if (power_on) {
+		acpi_dev_pm_full_power(adev);
+		__acpi_device_run_wake(adev, false);
+	}
+	return 0;
+}
+EXPORT_SYMBOL_GPL(acpi_dev_pm_attach);
+
+/**
+ * acpi_dev_pm_detach - Remove ACPI power management from the device.
+ * @dev: Device to take care of.
+ * @power_off: Whether or not to try to remove power from the device.
+ *
+ * Remove the device from the general ACPI PM domain and remove its wakeup
+ * notifier.  If @power_off is set, additionally remove power from the device if
+ * possible.
+ *
+ * Callers must ensure proper synchronization of this function with power
+ * management callbacks.
+ */
+void acpi_dev_pm_detach(struct device *dev, bool power_off)
+{
+	struct acpi_device *adev = acpi_dev_pm_get_node(dev);
+
+	if (adev && dev->pm_domain == &acpi_general_pm_domain) {
+		dev->pm_domain = NULL;
+		acpi_remove_pm_notifier(adev, acpi_wakeup_device);
+		if (power_off) {
+			/*
+			 * If the device's PM QoS resume latency limit or flags
+			 * have been exposed to user space, they have to be
+			 * hidden at this point, so that they don't affect the
+			 * choice of the low-power state to put the device into.
+			 */
+			dev_pm_qos_hide_latency_limit(dev);
+			dev_pm_qos_hide_flags(dev);
+			__acpi_device_run_wake(adev, false);
+			acpi_dev_pm_low_power(dev, adev, ACPI_STATE_S0);
+		}
+	}
+}
+EXPORT_SYMBOL_GPL(acpi_dev_pm_detach);
diff --git a/drivers/acpi/dock.c b/drivers/acpi/dock.c
index 88eb143..f32bd47 100644
--- a/drivers/acpi/dock.c
+++ b/drivers/acpi/dock.c
@@ -31,6 +31,7 @@
 #include <linux/platform_device.h>
 #include <linux/jiffies.h>
 #include <linux/stddef.h>
+#include <linux/acpi.h>
 #include <acpi/acpi_bus.h>
 #include <acpi/acpi_drivers.h>
 
@@ -460,12 +461,8 @@
 	struct acpi_object_list arg_list;
 	union acpi_object arg;
 	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
-	struct acpi_buffer name_buffer = { ACPI_ALLOCATE_BUFFER, NULL };
 
-	acpi_get_name(ds->handle, ACPI_FULL_PATHNAME, &name_buffer);
-
-	printk(KERN_INFO PREFIX "%s - %s\n",
-		(char *)name_buffer.pointer, dock ? "docking" : "undocking");
+	acpi_handle_info(ds->handle, "%s\n", dock ? "docking" : "undocking");
 
 	/* _DCK method has one argument */
 	arg_list.count = 1;
@@ -474,11 +471,10 @@
 	arg.integer.value = dock;
 	status = acpi_evaluate_object(ds->handle, "_DCK", &arg_list, &buffer);
 	if (ACPI_FAILURE(status) && status != AE_NOT_FOUND)
-		ACPI_EXCEPTION((AE_INFO, status, "%s - failed to execute"
-			" _DCK\n", (char *)name_buffer.pointer));
+		acpi_handle_err(ds->handle, "Failed to execute _DCK (0x%x)\n",
+				status);
 
 	kfree(buffer.pointer);
-	kfree(name_buffer.pointer);
 }
 
 static inline void dock(struct dock_station *ds)
@@ -525,9 +521,11 @@
 	status = acpi_evaluate_object(ds->handle, "_LCK", &arg_list, NULL);
 	if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
 		if (lock)
-			printk(KERN_WARNING PREFIX "Locking device failed\n");
+			acpi_handle_warn(ds->handle,
+				"Locking device failed (0x%x)\n", status);
 		else
-			printk(KERN_WARNING PREFIX "Unlocking device failed\n");
+			acpi_handle_warn(ds->handle,
+				"Unlocking device failed (0x%x)\n", status);
 	}
 }
 
@@ -667,7 +665,7 @@
 	dock_lock(ds, 0);
 	eject_dock(ds);
 	if (dock_present(ds)) {
-		printk(KERN_ERR PREFIX "Unable to undock!\n");
+		acpi_handle_err(ds->handle, "Unable to undock!\n");
 		return -EBUSY;
 	}
 	complete_undock(ds);
@@ -715,7 +713,7 @@
 			begin_dock(ds);
 			dock(ds);
 			if (!dock_present(ds)) {
-				printk(KERN_ERR PREFIX "Unable to dock!\n");
+				acpi_handle_err(handle, "Unable to dock!\n");
 				complete_dock(ds);
 				break;
 			}
@@ -743,7 +741,7 @@
 			dock_event(ds, event, UNDOCK_EVENT);
 		break;
 	default:
-		printk(KERN_ERR PREFIX "Unknown dock event %d\n", event);
+		acpi_handle_err(handle, "Unknown dock event %d\n", event);
 	}
 }
 
@@ -987,7 +985,7 @@
 	sysfs_remove_group(&dd->dev.kobj, &dock_attribute_group);
 err_unregister:
 	platform_device_unregister(dd);
-	printk(KERN_ERR "%s encountered error %d\n", __func__, ret);
+	acpi_handle_err(handle, "%s encountered error %d\n", __func__, ret);
 	return ret;
 }
 
@@ -1016,51 +1014,39 @@
 }
 
 /**
- * find_dock - look for a dock station
+ * find_dock_and_bay - look for dock stations and bays
  * @handle: acpi handle of a device
  * @lvl: unused
- * @context: counter of dock stations found
+ * @context: unused
  * @rv: unused
  *
- * This is called by acpi_walk_namespace to look for dock stations.
+ * This is called by acpi_walk_namespace to look for dock stations and bays.
  */
 static __init acpi_status
-find_dock(acpi_handle handle, u32 lvl, void *context, void **rv)
+find_dock_and_bay(acpi_handle handle, u32 lvl, void *context, void **rv)
 {
-	if (is_dock(handle))
+	if (is_dock(handle) || is_ejectable_bay(handle))
 		dock_add(handle);
 
 	return AE_OK;
 }
 
-static __init acpi_status
-find_bay(acpi_handle handle, u32 lvl, void *context, void **rv)
-{
-	/* If bay is a dock, it's already handled */
-	if (is_ejectable_bay(handle) && !is_dock(handle))
-		dock_add(handle);
-	return AE_OK;
-}
-
 static int __init dock_init(void)
 {
 	if (acpi_disabled)
 		return 0;
 
-	/* look for a dock station */
+	/* look for dock stations and bays */
 	acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
-			    ACPI_UINT32_MAX, find_dock, NULL, NULL, NULL);
+		ACPI_UINT32_MAX, find_dock_and_bay, NULL, NULL, NULL);
 
-	/* look for bay */
-	acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
-			ACPI_UINT32_MAX, find_bay, NULL, NULL, NULL);
 	if (!dock_station_count) {
-		printk(KERN_INFO PREFIX "No dock devices found.\n");
+		pr_info(PREFIX "No dock devices found.\n");
 		return 0;
 	}
 
 	register_acpi_bus_notifier(&dock_acpi_notifier);
-	printk(KERN_INFO PREFIX "%s: %d docks/bays found\n",
+	pr_info(PREFIX "%s: %d docks/bays found\n",
 		ACPI_DOCK_DRIVER_DESCRIPTION, dock_station_count);
 	return 0;
 }
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index a51df96..354007d 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -158,10 +158,10 @@
 {
 	unsigned long flags;
 	int ret = 0;
-	spin_lock_irqsave(&ec->curr_lock, flags);
+	spin_lock_irqsave(&ec->lock, flags);
 	if (!ec->curr || ec->curr->done)
 		ret = 1;
-	spin_unlock_irqrestore(&ec->curr_lock, flags);
+	spin_unlock_irqrestore(&ec->lock, flags);
 	return ret;
 }
 
@@ -175,32 +175,38 @@
 static void advance_transaction(struct acpi_ec *ec, u8 status)
 {
 	unsigned long flags;
-	spin_lock_irqsave(&ec->curr_lock, flags);
-	if (!ec->curr)
+	struct transaction *t = ec->curr;
+
+	spin_lock_irqsave(&ec->lock, flags);
+	if (!t)
 		goto unlock;
-	if (ec->curr->wlen > ec->curr->wi) {
+	if (t->wlen > t->wi) {
 		if ((status & ACPI_EC_FLAG_IBF) == 0)
 			acpi_ec_write_data(ec,
-				ec->curr->wdata[ec->curr->wi++]);
+				t->wdata[t->wi++]);
 		else
 			goto err;
-	} else if (ec->curr->rlen > ec->curr->ri) {
+	} else if (t->rlen > t->ri) {
 		if ((status & ACPI_EC_FLAG_OBF) == 1) {
-			ec->curr->rdata[ec->curr->ri++] = acpi_ec_read_data(ec);
-			if (ec->curr->rlen == ec->curr->ri)
-				ec->curr->done = true;
+			t->rdata[t->ri++] = acpi_ec_read_data(ec);
+			if (t->rlen == t->ri)
+				t->done = true;
 		} else
 			goto err;
-	} else if (ec->curr->wlen == ec->curr->wi &&
+	} else if (t->wlen == t->wi &&
 		   (status & ACPI_EC_FLAG_IBF) == 0)
-		ec->curr->done = true;
+		t->done = true;
 	goto unlock;
 err:
-	/* false interrupt, state didn't change */
-	if (in_interrupt())
-		++ec->curr->irq_count;
+	/*
+	 * If SCI bit is set, then don't think it's a false IRQ
+	 * otherwise will take a not handled IRQ as a false one.
+	 */
+	if (in_interrupt() && !(status & ACPI_EC_FLAG_SCI))
+		++t->irq_count;
+
 unlock:
-	spin_unlock_irqrestore(&ec->curr_lock, flags);
+	spin_unlock_irqrestore(&ec->lock, flags);
 }
 
 static int acpi_ec_sync_query(struct acpi_ec *ec);
@@ -238,9 +244,9 @@
 		if (acpi_ec_read_status(ec) & ACPI_EC_FLAG_IBF)
 			break;
 		pr_debug(PREFIX "controller reset, restart transaction\n");
-		spin_lock_irqsave(&ec->curr_lock, flags);
+		spin_lock_irqsave(&ec->lock, flags);
 		start_transaction(ec);
-		spin_unlock_irqrestore(&ec->curr_lock, flags);
+		spin_unlock_irqrestore(&ec->lock, flags);
 	}
 	return -ETIME;
 }
@@ -253,17 +259,17 @@
 	if (EC_FLAGS_MSI)
 		udelay(ACPI_EC_MSI_UDELAY);
 	/* start transaction */
-	spin_lock_irqsave(&ec->curr_lock, tmp);
+	spin_lock_irqsave(&ec->lock, tmp);
 	/* following two actions should be kept atomic */
 	ec->curr = t;
 	start_transaction(ec);
 	if (ec->curr->command == ACPI_EC_COMMAND_QUERY)
 		clear_bit(EC_FLAGS_QUERY_PENDING, &ec->flags);
-	spin_unlock_irqrestore(&ec->curr_lock, tmp);
+	spin_unlock_irqrestore(&ec->lock, tmp);
 	ret = ec_poll(ec);
-	spin_lock_irqsave(&ec->curr_lock, tmp);
+	spin_lock_irqsave(&ec->lock, tmp);
 	ec->curr = NULL;
-	spin_unlock_irqrestore(&ec->curr_lock, tmp);
+	spin_unlock_irqrestore(&ec->lock, tmp);
 	return ret;
 }
 
@@ -292,7 +298,7 @@
 		return -EINVAL;
 	if (t->rdata)
 		memset(t->rdata, 0, t->rlen);
-	mutex_lock(&ec->lock);
+	mutex_lock(&ec->mutex);
 	if (test_bit(EC_FLAGS_BLOCKED, &ec->flags)) {
 		status = -EINVAL;
 		goto unlock;
@@ -310,7 +316,8 @@
 		status = -ETIME;
 		goto end;
 	}
-	pr_debug(PREFIX "transaction start\n");
+	pr_debug(PREFIX "transaction start (cmd=0x%02x, addr=0x%02x)\n",
+			t->command, t->wdata ? t->wdata[0] : 0);
 	/* disable GPE during transaction if storm is detected */
 	if (test_bit(EC_FLAGS_GPE_STORM, &ec->flags)) {
 		/* It has to be disabled, so that it doesn't trigger. */
@@ -326,8 +333,9 @@
 		/* It is safe to enable the GPE outside of the transaction. */
 		acpi_enable_gpe(NULL, ec->gpe);
 	} else if (t->irq_count > ec_storm_threshold) {
-		pr_info(PREFIX "GPE storm detected, "
-			"transactions will use polling mode\n");
+		pr_info(PREFIX "GPE storm detected(%d GPEs), "
+			"transactions will use polling mode\n",
+			t->irq_count);
 		set_bit(EC_FLAGS_GPE_STORM, &ec->flags);
 	}
 	pr_debug(PREFIX "transaction end\n");
@@ -335,7 +343,7 @@
 	if (ec->global_lock)
 		acpi_release_global_lock(glk);
 unlock:
-	mutex_unlock(&ec->lock);
+	mutex_unlock(&ec->mutex);
 	return status;
 }
 
@@ -403,7 +411,7 @@
 
 EXPORT_SYMBOL(ec_burst_disable);
 
-int ec_read(u8 addr, u8 * val)
+int ec_read(u8 addr, u8 *val)
 {
 	int err;
 	u8 temp_data;
@@ -468,10 +476,10 @@
 	if (!ec)
 		return;
 
-	mutex_lock(&ec->lock);
+	mutex_lock(&ec->mutex);
 	/* Prevent transactions from being carried out */
 	set_bit(EC_FLAGS_BLOCKED, &ec->flags);
-	mutex_unlock(&ec->lock);
+	mutex_unlock(&ec->mutex);
 }
 
 void acpi_ec_unblock_transactions(void)
@@ -481,10 +489,10 @@
 	if (!ec)
 		return;
 
-	mutex_lock(&ec->lock);
+	mutex_lock(&ec->mutex);
 	/* Allow transactions to be carried out again */
 	clear_bit(EC_FLAGS_BLOCKED, &ec->flags);
-	mutex_unlock(&ec->lock);
+	mutex_unlock(&ec->mutex);
 }
 
 void acpi_ec_unblock_transactions_early(void)
@@ -536,9 +544,9 @@
 	handler->handle = handle;
 	handler->func = func;
 	handler->data = data;
-	mutex_lock(&ec->lock);
+	mutex_lock(&ec->mutex);
 	list_add(&handler->node, &ec->list);
-	mutex_unlock(&ec->lock);
+	mutex_unlock(&ec->mutex);
 	return 0;
 }
 
@@ -547,14 +555,14 @@
 void acpi_ec_remove_query_handler(struct acpi_ec *ec, u8 query_bit)
 {
 	struct acpi_ec_query_handler *handler, *tmp;
-	mutex_lock(&ec->lock);
+	mutex_lock(&ec->mutex);
 	list_for_each_entry_safe(handler, tmp, &ec->list, node) {
 		if (query_bit == handler->query_bit) {
 			list_del(&handler->node);
 			kfree(handler);
 		}
 	}
-	mutex_unlock(&ec->lock);
+	mutex_unlock(&ec->mutex);
 }
 
 EXPORT_SYMBOL_GPL(acpi_ec_remove_query_handler);
@@ -601,9 +609,9 @@
 	struct acpi_ec *ec = ec_cxt;
 	if (!ec)
 		return;
-	mutex_lock(&ec->lock);
+	mutex_lock(&ec->mutex);
 	acpi_ec_sync_query(ec);
-	mutex_unlock(&ec->lock);
+	mutex_unlock(&ec->mutex);
 }
 
 static int ec_check_sci(struct acpi_ec *ec, u8 state)
@@ -622,10 +630,11 @@
 	u32 gpe_number, void *data)
 {
 	struct acpi_ec *ec = data;
+	u8 status = acpi_ec_read_status(ec);
 
-	pr_debug(PREFIX "~~~> interrupt\n");
+	pr_debug(PREFIX "~~~> interrupt, status:0x%02x\n", status);
 
-	advance_transaction(ec, acpi_ec_read_status(ec));
+	advance_transaction(ec, status);
 	if (ec_transaction_done(ec) &&
 	    (acpi_ec_read_status(ec) & ACPI_EC_FLAG_IBF) == 0) {
 		wake_up(&ec->wait);
@@ -691,10 +700,10 @@
 	if (!ec)
 		return NULL;
 	ec->flags = 1 << EC_FLAGS_QUERY_PENDING;
-	mutex_init(&ec->lock);
+	mutex_init(&ec->mutex);
 	init_waitqueue_head(&ec->wait);
 	INIT_LIST_HEAD(&ec->list);
-	spin_lock_init(&ec->curr_lock);
+	spin_lock_init(&ec->lock);
 	return ec;
 }
 
@@ -853,12 +862,12 @@
 
 	ec = acpi_driver_data(device);
 	ec_remove_handlers(ec);
-	mutex_lock(&ec->lock);
+	mutex_lock(&ec->mutex);
 	list_for_each_entry_safe(handler, tmp, &ec->list, node) {
 		list_del(&handler->node);
 		kfree(handler);
 	}
-	mutex_unlock(&ec->lock);
+	mutex_unlock(&ec->mutex);
 	release_region(ec->data_addr, 1);
 	release_region(ec->command_addr, 1);
 	device->driver_data = NULL;
diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c
index 0837308..0155184 100644
--- a/drivers/acpi/glue.c
+++ b/drivers/acpi/glue.c
@@ -130,46 +130,59 @@
 {
 	struct acpi_device *acpi_dev;
 	acpi_status status;
-	struct acpi_device_physical_node *physical_node;
+	struct acpi_device_physical_node *physical_node, *pn;
 	char physical_node_name[sizeof(PHYSICAL_NODE_STRING) + 2];
 	int retval = -EINVAL;
 
-	if (dev->archdata.acpi_handle) {
-		dev_warn(dev, "Drivers changed 'acpi_handle'\n");
-		return -EINVAL;
+	if (ACPI_HANDLE(dev)) {
+		if (handle) {
+			dev_warn(dev, "ACPI handle is already set\n");
+			return -EINVAL;
+		} else {
+			handle = ACPI_HANDLE(dev);
+		}
 	}
+	if (!handle)
+		return -EINVAL;
 
 	get_device(dev);
 	status = acpi_bus_get_device(handle, &acpi_dev);
 	if (ACPI_FAILURE(status))
 		goto err;
 
-	physical_node = kzalloc(sizeof(struct acpi_device_physical_node),
-		GFP_KERNEL);
+	physical_node = kzalloc(sizeof(*physical_node), GFP_KERNEL);
 	if (!physical_node) {
 		retval = -ENOMEM;
 		goto err;
 	}
 
 	mutex_lock(&acpi_dev->physical_node_lock);
+
+	/* Sanity check. */
+	list_for_each_entry(pn, &acpi_dev->physical_node_list, node)
+		if (pn->dev == dev) {
+			dev_warn(dev, "Already associated with ACPI node\n");
+			goto err_free;
+		}
+
 	/* allocate physical node id according to physical_node_id_bitmap */
 	physical_node->node_id =
 		find_first_zero_bit(acpi_dev->physical_node_id_bitmap,
 		ACPI_MAX_PHYSICAL_NODE);
 	if (physical_node->node_id >= ACPI_MAX_PHYSICAL_NODE) {
 		retval = -ENOSPC;
-		mutex_unlock(&acpi_dev->physical_node_lock);
-		kfree(physical_node);
-		goto err;
+		goto err_free;
 	}
 
 	set_bit(physical_node->node_id, acpi_dev->physical_node_id_bitmap);
 	physical_node->dev = dev;
 	list_add_tail(&physical_node->node, &acpi_dev->physical_node_list);
 	acpi_dev->physical_node_count++;
+
 	mutex_unlock(&acpi_dev->physical_node_lock);
 
-	dev->archdata.acpi_handle = handle;
+	if (!ACPI_HANDLE(dev))
+		ACPI_HANDLE_SET(dev, acpi_dev->handle);
 
 	if (!physical_node->node_id)
 		strcpy(physical_node_name, PHYSICAL_NODE_STRING);
@@ -187,8 +200,14 @@
 	return 0;
 
  err:
+	ACPI_HANDLE_SET(dev, NULL);
 	put_device(dev);
 	return retval;
+
+ err_free:
+	mutex_unlock(&acpi_dev->physical_node_lock);
+	kfree(physical_node);
+	goto err;
 }
 
 static int acpi_unbind_one(struct device *dev)
@@ -198,11 +217,10 @@
 	acpi_status status;
 	struct list_head *node, *next;
 
-	if (!dev->archdata.acpi_handle)
+	if (!ACPI_HANDLE(dev))
 		return 0;
 
-	status = acpi_bus_get_device(dev->archdata.acpi_handle,
-		&acpi_dev);
+	status = acpi_bus_get_device(ACPI_HANDLE(dev), &acpi_dev);
 	if (ACPI_FAILURE(status))
 		goto err;
 
@@ -228,7 +246,7 @@
 
 		sysfs_remove_link(&acpi_dev->dev.kobj, physical_node_name);
 		sysfs_remove_link(&dev->kobj, "firmware_node");
-		dev->archdata.acpi_handle = NULL;
+		ACPI_HANDLE_SET(dev, NULL);
 		/* acpi_bind_one increase refcnt by one */
 		put_device(dev);
 		kfree(entry);
@@ -248,6 +266,10 @@
 	acpi_handle handle;
 	int ret = -EINVAL;
 
+	ret = acpi_bind_one(dev, NULL);
+	if (!ret)
+		goto out;
+
 	if (!dev->bus || !dev->parent) {
 		/* bridge devices genernally haven't bus or parent */
 		ret = acpi_find_bridge_device(dev, &handle);
@@ -261,16 +283,16 @@
 	}
 	if ((ret = type->find_device(dev, &handle)) != 0)
 		DBG("Can't get handler for %s\n", dev_name(dev));
-      end:
+ end:
 	if (!ret)
 		acpi_bind_one(dev, handle);
 
+ out:
 #if ACPI_GLUE_DEBUG
 	if (!ret) {
 		struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
 
-		acpi_get_name(dev->archdata.acpi_handle,
-			      ACPI_FULL_PATHNAME, &buffer);
+		acpi_get_name(dev->acpi_handle, ACPI_FULL_PATHNAME, &buffer);
 		DBG("Device %s -> %s\n", dev_name(dev), (char *)buffer.pointer);
 		kfree(buffer.pointer);
 	} else
diff --git a/drivers/acpi/hed.c b/drivers/acpi/hed.c
index 0ec28a3..a0cc796 100644
--- a/drivers/acpi/hed.c
+++ b/drivers/acpi/hed.c
@@ -70,7 +70,7 @@
 	return 0;
 }
 
-static int __devexit acpi_hed_remove(struct acpi_device *device, int type)
+static int acpi_hed_remove(struct acpi_device *device, int type)
 {
 	hed_handle = NULL;
 	return 0;
diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h
index ca75b9c..3c407cd 100644
--- a/drivers/acpi/internal.h
+++ b/drivers/acpi/internal.h
@@ -58,11 +58,11 @@
 	unsigned long data_addr;
 	unsigned long global_lock;
 	unsigned long flags;
-	struct mutex lock;
+	struct mutex mutex;
 	wait_queue_head_t wait;
 	struct list_head list;
 	struct transaction *curr;
-	spinlock_t curr_lock;
+	spinlock_t lock;
 };
 
 extern struct acpi_ec *first_ec;
@@ -93,4 +93,11 @@
 static inline void suspend_nvs_restore(void) {}
 #endif
 
+/*--------------------------------------------------------------------------
+				Platform bus support
+  -------------------------------------------------------------------------- */
+struct platform_device;
+
+struct platform_device *acpi_create_platform_device(struct acpi_device *adev);
+
 #endif /* _ACPI_INTERNAL_H_ */
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index 9eaf708..6dc4a2b 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -932,7 +932,7 @@
 	 * having a static work_struct.
 	 */
 
-	dpc = kmalloc(sizeof(struct acpi_os_dpc), GFP_ATOMIC);
+	dpc = kzalloc(sizeof(struct acpi_os_dpc), GFP_ATOMIC);
 	if (!dpc)
 		return AE_NO_MEMORY;
 
@@ -944,17 +944,22 @@
 	 * because the hotplug code may call driver .remove() functions,
 	 * which invoke flush_scheduled_work/acpi_os_wait_events_complete
 	 * to flush these workqueues.
+	 *
+	 * To prevent lockdep from complaining unnecessarily, make sure that
+	 * there is a different static lockdep key for each workqueue by using
+	 * INIT_WORK() for each of them separately.
 	 */
-	queue = hp ? kacpi_hotplug_wq :
-		(type == OSL_NOTIFY_HANDLER ? kacpi_notify_wq : kacpid_wq);
-	dpc->wait = hp ? 1 : 0;
-
-	if (queue == kacpi_hotplug_wq)
+	if (hp) {
+		queue = kacpi_hotplug_wq;
+		dpc->wait = 1;
 		INIT_WORK(&dpc->work, acpi_os_execute_deferred);
-	else if (queue == kacpi_notify_wq)
+	} else if (type == OSL_NOTIFY_HANDLER) {
+		queue = kacpi_notify_wq;
 		INIT_WORK(&dpc->work, acpi_os_execute_deferred);
-	else
+	} else {
+		queue = kacpid_wq;
 		INIT_WORK(&dpc->work, acpi_os_execute_deferred);
+	}
 
 	/*
 	 * On some machines, a software-initiated SMI causes corruption unless
@@ -986,6 +991,7 @@
 {
 	return __acpi_os_execute(0, function, context, 1);
 }
+EXPORT_SYMBOL(acpi_os_hotplug_execute);
 
 void acpi_os_wait_events_complete(void)
 {
diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c
index 0eefa12..23a0324 100644
--- a/drivers/acpi/pci_irq.c
+++ b/drivers/acpi/pci_irq.c
@@ -459,19 +459,19 @@
 	 */
 	if (gsi < 0) {
 		u32 dev_gsi;
-		dev_warn(&dev->dev, "PCI INT %c: no GSI", pin_name(pin));
 		/* Interrupt Line values above 0xF are forbidden */
 		if (dev->irq > 0 && (dev->irq <= 0xF) &&
 		    (acpi_isa_irq_to_gsi(dev->irq, &dev_gsi) == 0)) {
-			printk(" - using ISA IRQ %d\n", dev->irq);
+			dev_warn(&dev->dev, "PCI INT %c: no GSI - using ISA IRQ %d\n",
+				 pin_name(pin), dev->irq);
 			acpi_register_gsi(&dev->dev, dev_gsi,
 					  ACPI_LEVEL_SENSITIVE,
 					  ACPI_ACTIVE_LOW);
-			return 0;
 		} else {
-			printk("\n");
-			return 0;
+			dev_warn(&dev->dev, "PCI INT %c: no GSI\n",
+				 pin_name(pin));
 		}
+		return 0;
 	}
 
 	rc = acpi_register_gsi(&dev->dev, gsi, triggering, polarity);
@@ -495,11 +495,6 @@
 	return 0;
 }
 
-/* FIXME: implement x86/x86_64 version */
-void __attribute__ ((weak)) acpi_unregister_gsi(u32 i)
-{
-}
-
 void acpi_pci_irq_disable(struct pci_dev *dev)
 {
 	struct acpi_prt_entry *entry;
diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c
index 40e38a0..7db61b8 100644
--- a/drivers/acpi/power.c
+++ b/drivers/acpi/power.c
@@ -473,7 +473,7 @@
 	return ret;
 
 no_power_resource:
-	printk(KERN_DEBUG PREFIX "Invalid Power Resource to register!");
+	printk(KERN_DEBUG PREFIX "Invalid Power Resource to register!\n");
 	return -ENODEV;
 }
 EXPORT_SYMBOL_GPL(acpi_power_resource_register_device);
diff --git a/drivers/acpi/proc.c b/drivers/acpi/proc.c
index 27adb09..ef98796 100644
--- a/drivers/acpi/proc.c
+++ b/drivers/acpi/proc.c
@@ -362,16 +362,13 @@
 	struct list_head *node, *next;
 	char strbuf[5];
 	char str[5] = "";
-	unsigned int len = count;
 
-	if (len > 4)
-		len = 4;
-	if (len < 0)
-		return -EFAULT;
+	if (count > 4)
+		count = 4;
 
-	if (copy_from_user(strbuf, buffer, len))
+	if (copy_from_user(strbuf, buffer, count))
 		return -EFAULT;
-	strbuf[len] = '\0';
+	strbuf[count] = '\0';
 	sscanf(strbuf, "%s", str);
 
 	mutex_lock(&acpi_device_lock);
diff --git a/drivers/acpi/processor_driver.c b/drivers/acpi/processor_driver.c
index bd4e5dc..e83311b 100644
--- a/drivers/acpi/processor_driver.c
+++ b/drivers/acpi/processor_driver.c
@@ -44,6 +44,7 @@
 #include <linux/moduleparam.h>
 #include <linux/cpuidle.h>
 #include <linux/slab.h>
+#include <linux/acpi.h>
 
 #include <asm/io.h>
 #include <asm/cpu.h>
@@ -282,7 +283,9 @@
 		/* Declared with "Processor" statement; match ProcessorID */
 		status = acpi_evaluate_object(pr->handle, NULL, NULL, &buffer);
 		if (ACPI_FAILURE(status)) {
-			printk(KERN_ERR PREFIX "Evaluating processor object\n");
+			dev_err(&device->dev,
+				"Failed to evaluate processor object (0x%x)\n",
+				status);
 			return -ENODEV;
 		}
 
@@ -301,8 +304,9 @@
 		status = acpi_evaluate_integer(pr->handle, METHOD_NAME__UID,
 						NULL, &value);
 		if (ACPI_FAILURE(status)) {
-			printk(KERN_ERR PREFIX
-			    "Evaluating processor _UID [%#x]\n", status);
+			dev_err(&device->dev,
+				"Failed to evaluate processor _UID (0x%x)\n",
+				status);
 			return -ENODEV;
 		}
 		device_declaration = 1;
@@ -345,7 +349,7 @@
 	if (!object.processor.pblk_address)
 		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No PBLK (NULL address)\n"));
 	else if (object.processor.pblk_length != 6)
-		printk(KERN_ERR PREFIX "Invalid PBLK length [%d]\n",
+		dev_err(&device->dev, "Invalid PBLK length [%d]\n",
 			    object.processor.pblk_length);
 	else {
 		pr->throttling.address = object.processor.pblk_address;
@@ -430,8 +434,8 @@
 		 * Initialize missing things
 		 */
 		if (pr->flags.need_hotplug_init) {
-			printk(KERN_INFO "Will online and init hotplugged "
-			       "CPU: %d\n", pr->id);
+			pr_info("Will online and init hotplugged CPU: %d\n",
+				pr->id);
 			WARN(acpi_processor_start(pr), "Failed to start CPU:"
 				" %d\n", pr->id);
 			pr->flags.need_hotplug_init = 0;
@@ -492,14 +496,16 @@
 				   &pr->cdev->device.kobj,
 				   "thermal_cooling");
 	if (result) {
-		printk(KERN_ERR PREFIX "Create sysfs link\n");
+		dev_err(&device->dev,
+			"Failed to create sysfs link 'thermal_cooling'\n");
 		goto err_thermal_unregister;
 	}
 	result = sysfs_create_link(&pr->cdev->device.kobj,
 				   &device->dev.kobj,
 				   "device");
 	if (result) {
-		printk(KERN_ERR PREFIX "Create sysfs link\n");
+		dev_err(&pr->cdev->device,
+			"Failed to create sysfs link 'device'\n");
 		goto err_remove_sysfs_thermal;
 	}
 
@@ -561,8 +567,9 @@
 	 */
 	if (per_cpu(processor_device_array, pr->id) != NULL &&
 	    per_cpu(processor_device_array, pr->id) != device) {
-		printk(KERN_WARNING "BIOS reported wrong ACPI id "
-			"for the processor\n");
+		dev_warn(&device->dev,
+			"BIOS reported wrong ACPI id %d for the processor\n",
+			pr->id);
 		result = -ENODEV;
 		goto err_free_cpumask;
 	}
@@ -695,8 +702,8 @@
 static void acpi_processor_hotplug_notify(acpi_handle handle,
 					  u32 event, void *data)
 {
-	struct acpi_processor *pr;
 	struct acpi_device *device = NULL;
+	struct acpi_eject_event *ej_event = NULL;
 	u32 ost_code = ACPI_OST_SC_NON_SPECIFIC_FAILURE; /* default */
 	int result;
 
@@ -716,7 +723,7 @@
 
 		result = acpi_processor_device_add(handle, &device);
 		if (result) {
-			printk(KERN_ERR PREFIX "Unable to add the device\n");
+			acpi_handle_err(handle, "Unable to add the device\n");
 			break;
 		}
 
@@ -728,20 +735,29 @@
 				  "received ACPI_NOTIFY_EJECT_REQUEST\n"));
 
 		if (acpi_bus_get_device(handle, &device)) {
-			printk(KERN_ERR PREFIX
-				    "Device don't exist, dropping EJECT\n");
+			acpi_handle_err(handle,
+				"Device don't exist, dropping EJECT\n");
 			break;
 		}
-		pr = acpi_driver_data(device);
-		if (!pr) {
-			printk(KERN_ERR PREFIX
-				    "Driver data is NULL, dropping EJECT\n");
+		if (!acpi_driver_data(device)) {
+			acpi_handle_err(handle,
+				"Driver data is NULL, dropping EJECT\n");
 			break;
 		}
 
-		/* REVISIT: update when eject is supported */
-		ost_code = ACPI_OST_SC_EJECT_NOT_SUPPORTED;
-		break;
+		ej_event = kmalloc(sizeof(*ej_event), GFP_KERNEL);
+		if (!ej_event) {
+			acpi_handle_err(handle, "No memory, dropping EJECT\n");
+			break;
+		}
+
+		ej_event->handle = handle;
+		ej_event->event = ACPI_NOTIFY_EJECT_REQUEST;
+		acpi_os_hotplug_execute(acpi_bus_hot_remove_device,
+					(void *)ej_event);
+
+		/* eject is performed asynchronously */
+		return;
 
 	default:
 		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
@@ -841,7 +857,7 @@
 	 * and do it when the CPU gets online the first time
 	 * TBD: Cleanup above functions and try to do this more elegant.
 	 */
-	printk(KERN_INFO "CPU %d got hotplugged\n", pr->id);
+	pr_info("CPU %d got hotplugged\n", pr->id);
 	pr->flags.need_hotplug_init = 1;
 
 	return AE_OK;
@@ -852,8 +868,22 @@
 	if (cpu_online(pr->id))
 		cpu_down(pr->id);
 
+	get_online_cpus();
+	/*
+	 * The cpu might become online again at this point. So we check whether
+	 * the cpu has been onlined or not. If the cpu became online, it means
+	 * that someone wants to use the cpu. So acpi_processor_handle_eject()
+	 * returns -EAGAIN.
+	 */
+	if (unlikely(cpu_online(pr->id))) {
+		put_online_cpus();
+		pr_warn("Failed to remove CPU %d, because other task "
+			"brought the CPU back online\n", pr->id);
+		return -EAGAIN;
+	}
 	arch_unregister_cpu(pr->id);
 	acpi_unmap_lsapic(pr->id);
+	put_online_cpus();
 	return (0);
 }
 #else
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index e8086c7..f1a5da4 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -735,31 +735,18 @@
 static int acpi_idle_enter_c1(struct cpuidle_device *dev,
 		struct cpuidle_driver *drv, int index)
 {
-	ktime_t  kt1, kt2;
-	s64 idle_time;
 	struct acpi_processor *pr;
 	struct cpuidle_state_usage *state_usage = &dev->states_usage[index];
 	struct acpi_processor_cx *cx = cpuidle_get_statedata(state_usage);
 
 	pr = __this_cpu_read(processors);
-	dev->last_residency = 0;
 
 	if (unlikely(!pr))
 		return -EINVAL;
 
-	local_irq_disable();
-
-
 	lapic_timer_state_broadcast(pr, cx, 1);
-	kt1 = ktime_get_real();
 	acpi_idle_do_entry(cx);
-	kt2 = ktime_get_real();
-	idle_time =  ktime_to_us(ktime_sub(kt2, kt1));
 
-	/* Update device last_residency*/
-	dev->last_residency = (int)idle_time;
-
-	local_irq_enable();
 	lapic_timer_state_broadcast(pr, cx, 0);
 
 	return index;
@@ -806,19 +793,12 @@
 	struct acpi_processor *pr;
 	struct cpuidle_state_usage *state_usage = &dev->states_usage[index];
 	struct acpi_processor_cx *cx = cpuidle_get_statedata(state_usage);
-	ktime_t  kt1, kt2;
-	s64 idle_time_ns;
-	s64 idle_time;
 
 	pr = __this_cpu_read(processors);
-	dev->last_residency = 0;
 
 	if (unlikely(!pr))
 		return -EINVAL;
 
-	local_irq_disable();
-
-
 	if (cx->entry_method != ACPI_CSTATE_FFH) {
 		current_thread_info()->status &= ~TS_POLLING;
 		/*
@@ -829,7 +809,6 @@
 
 		if (unlikely(need_resched())) {
 			current_thread_info()->status |= TS_POLLING;
-			local_irq_enable();
 			return -EINVAL;
 		}
 	}
@@ -843,22 +822,12 @@
 	if (cx->type == ACPI_STATE_C3)
 		ACPI_FLUSH_CPU_CACHE();
 
-	kt1 = ktime_get_real();
 	/* Tell the scheduler that we are going deep-idle: */
 	sched_clock_idle_sleep_event();
 	acpi_idle_do_entry(cx);
-	kt2 = ktime_get_real();
-	idle_time_ns = ktime_to_ns(ktime_sub(kt2, kt1));
-	idle_time = idle_time_ns;
-	do_div(idle_time, NSEC_PER_USEC);
 
-	/* Update device last_residency*/
-	dev->last_residency = (int)idle_time;
+	sched_clock_idle_wakeup_event(0);
 
-	/* Tell the scheduler how much we idled: */
-	sched_clock_idle_wakeup_event(idle_time_ns);
-
-	local_irq_enable();
 	if (cx->entry_method != ACPI_CSTATE_FFH)
 		current_thread_info()->status |= TS_POLLING;
 
@@ -883,13 +852,8 @@
 	struct acpi_processor *pr;
 	struct cpuidle_state_usage *state_usage = &dev->states_usage[index];
 	struct acpi_processor_cx *cx = cpuidle_get_statedata(state_usage);
-	ktime_t  kt1, kt2;
-	s64 idle_time_ns;
-	s64 idle_time;
-
 
 	pr = __this_cpu_read(processors);
-	dev->last_residency = 0;
 
 	if (unlikely(!pr))
 		return -EINVAL;
@@ -899,16 +863,11 @@
 			return drv->states[drv->safe_state_index].enter(dev,
 						drv, drv->safe_state_index);
 		} else {
-			local_irq_disable();
 			acpi_safe_halt();
-			local_irq_enable();
 			return -EBUSY;
 		}
 	}
 
-	local_irq_disable();
-
-
 	if (cx->entry_method != ACPI_CSTATE_FFH) {
 		current_thread_info()->status &= ~TS_POLLING;
 		/*
@@ -919,7 +878,6 @@
 
 		if (unlikely(need_resched())) {
 			current_thread_info()->status |= TS_POLLING;
-			local_irq_enable();
 			return -EINVAL;
 		}
 	}
@@ -934,7 +892,6 @@
 	 */
 	lapic_timer_state_broadcast(pr, cx, 1);
 
-	kt1 = ktime_get_real();
 	/*
 	 * disable bus master
 	 * bm_check implies we need ARB_DIS
@@ -965,18 +922,9 @@
 		c3_cpu_count--;
 		raw_spin_unlock(&c3_lock);
 	}
-	kt2 = ktime_get_real();
-	idle_time_ns = ktime_to_ns(ktime_sub(kt2, kt1));
-	idle_time = idle_time_ns;
-	do_div(idle_time, NSEC_PER_USEC);
 
-	/* Update device last_residency*/
-	dev->last_residency = (int)idle_time;
+	sched_clock_idle_wakeup_event(0);
 
-	/* Tell the scheduler how much we idled: */
-	sched_clock_idle_wakeup_event(idle_time_ns);
-
-	local_irq_enable();
 	if (cx->entry_method != ACPI_CSTATE_FFH)
 		current_thread_info()->status |= TS_POLLING;
 
@@ -987,6 +935,7 @@
 struct cpuidle_driver acpi_idle_driver = {
 	.name =		"acpi_idle",
 	.owner =	THIS_MODULE,
+	.en_core_tk_irqen = 1,
 };
 
 /**
diff --git a/drivers/acpi/resource.c b/drivers/acpi/resource.c
new file mode 100644
index 0000000..a3868f6
--- /dev/null
+++ b/drivers/acpi/resource.c
@@ -0,0 +1,526 @@
+/*
+ * drivers/acpi/resource.c - ACPI device resources interpretation.
+ *
+ * Copyright (C) 2012, Intel Corp.
+ * Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope that it will be useful, but
+ *  WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+#include <linux/acpi.h>
+#include <linux/device.h>
+#include <linux/export.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+
+#ifdef CONFIG_X86
+#define valid_IRQ(i) (((i) != 0) && ((i) != 2))
+#else
+#define valid_IRQ(i) (true)
+#endif
+
+static unsigned long acpi_dev_memresource_flags(u64 len, u8 write_protect,
+						bool window)
+{
+	unsigned long flags = IORESOURCE_MEM;
+
+	if (len == 0)
+		flags |= IORESOURCE_DISABLED;
+
+	if (write_protect == ACPI_READ_WRITE_MEMORY)
+		flags |= IORESOURCE_MEM_WRITEABLE;
+
+	if (window)
+		flags |= IORESOURCE_WINDOW;
+
+	return flags;
+}
+
+static void acpi_dev_get_memresource(struct resource *res, u64 start, u64 len,
+				     u8 write_protect)
+{
+	res->start = start;
+	res->end = start + len - 1;
+	res->flags = acpi_dev_memresource_flags(len, write_protect, false);
+}
+
+/**
+ * acpi_dev_resource_memory - Extract ACPI memory resource information.
+ * @ares: Input ACPI resource object.
+ * @res: Output generic resource object.
+ *
+ * Check if the given ACPI resource object represents a memory resource and
+ * if that's the case, use the information in it to populate the generic
+ * resource object pointed to by @res.
+ */
+bool acpi_dev_resource_memory(struct acpi_resource *ares, struct resource *res)
+{
+	struct acpi_resource_memory24 *memory24;
+	struct acpi_resource_memory32 *memory32;
+	struct acpi_resource_fixed_memory32 *fixed_memory32;
+
+	switch (ares->type) {
+	case ACPI_RESOURCE_TYPE_MEMORY24:
+		memory24 = &ares->data.memory24;
+		acpi_dev_get_memresource(res, memory24->minimum,
+					 memory24->address_length,
+					 memory24->write_protect);
+		break;
+	case ACPI_RESOURCE_TYPE_MEMORY32:
+		memory32 = &ares->data.memory32;
+		acpi_dev_get_memresource(res, memory32->minimum,
+					 memory32->address_length,
+					 memory32->write_protect);
+		break;
+	case ACPI_RESOURCE_TYPE_FIXED_MEMORY32:
+		fixed_memory32 = &ares->data.fixed_memory32;
+		acpi_dev_get_memresource(res, fixed_memory32->address,
+					 fixed_memory32->address_length,
+					 fixed_memory32->write_protect);
+		break;
+	default:
+		return false;
+	}
+	return true;
+}
+EXPORT_SYMBOL_GPL(acpi_dev_resource_memory);
+
+static unsigned int acpi_dev_ioresource_flags(u64 start, u64 end, u8 io_decode,
+					      bool window)
+{
+	int flags = IORESOURCE_IO;
+
+	if (io_decode == ACPI_DECODE_16)
+		flags |= IORESOURCE_IO_16BIT_ADDR;
+
+	if (start > end || end >= 0x10003)
+		flags |= IORESOURCE_DISABLED;
+
+	if (window)
+		flags |= IORESOURCE_WINDOW;
+
+	return flags;
+}
+
+static void acpi_dev_get_ioresource(struct resource *res, u64 start, u64 len,
+				    u8 io_decode)
+{
+	u64 end = start + len - 1;
+
+	res->start = start;
+	res->end = end;
+	res->flags = acpi_dev_ioresource_flags(start, end, io_decode, false);
+}
+
+/**
+ * acpi_dev_resource_io - Extract ACPI I/O resource information.
+ * @ares: Input ACPI resource object.
+ * @res: Output generic resource object.
+ *
+ * Check if the given ACPI resource object represents an I/O resource and
+ * if that's the case, use the information in it to populate the generic
+ * resource object pointed to by @res.
+ */
+bool acpi_dev_resource_io(struct acpi_resource *ares, struct resource *res)
+{
+	struct acpi_resource_io *io;
+	struct acpi_resource_fixed_io *fixed_io;
+
+	switch (ares->type) {
+	case ACPI_RESOURCE_TYPE_IO:
+		io = &ares->data.io;
+		acpi_dev_get_ioresource(res, io->minimum,
+					io->address_length,
+					io->io_decode);
+		break;
+	case ACPI_RESOURCE_TYPE_FIXED_IO:
+		fixed_io = &ares->data.fixed_io;
+		acpi_dev_get_ioresource(res, fixed_io->address,
+					fixed_io->address_length,
+					ACPI_DECODE_10);
+		break;
+	default:
+		return false;
+	}
+	return true;
+}
+EXPORT_SYMBOL_GPL(acpi_dev_resource_io);
+
+/**
+ * acpi_dev_resource_address_space - Extract ACPI address space information.
+ * @ares: Input ACPI resource object.
+ * @res: Output generic resource object.
+ *
+ * Check if the given ACPI resource object represents an address space resource
+ * and if that's the case, use the information in it to populate the generic
+ * resource object pointed to by @res.
+ */
+bool acpi_dev_resource_address_space(struct acpi_resource *ares,
+				     struct resource *res)
+{
+	acpi_status status;
+	struct acpi_resource_address64 addr;
+	bool window;
+	u64 len;
+	u8 io_decode;
+
+	switch (ares->type) {
+	case ACPI_RESOURCE_TYPE_ADDRESS16:
+	case ACPI_RESOURCE_TYPE_ADDRESS32:
+	case ACPI_RESOURCE_TYPE_ADDRESS64:
+		break;
+	default:
+		return false;
+	}
+
+	status = acpi_resource_to_address64(ares, &addr);
+	if (ACPI_FAILURE(status))
+		return true;
+
+	res->start = addr.minimum;
+	res->end = addr.maximum;
+	window = addr.producer_consumer == ACPI_PRODUCER;
+
+	switch(addr.resource_type) {
+	case ACPI_MEMORY_RANGE:
+		len = addr.maximum - addr.minimum + 1;
+		res->flags = acpi_dev_memresource_flags(len,
+						addr.info.mem.write_protect,
+						window);
+		break;
+	case ACPI_IO_RANGE:
+		io_decode = addr.granularity == 0xfff ?
+				ACPI_DECODE_10 : ACPI_DECODE_16;
+		res->flags = acpi_dev_ioresource_flags(addr.minimum,
+						       addr.maximum,
+						       io_decode, window);
+		break;
+	case ACPI_BUS_NUMBER_RANGE:
+		res->flags = IORESOURCE_BUS;
+		break;
+	default:
+		res->flags = 0;
+	}
+
+	return true;
+}
+EXPORT_SYMBOL_GPL(acpi_dev_resource_address_space);
+
+/**
+ * acpi_dev_resource_ext_address_space - Extract ACPI address space information.
+ * @ares: Input ACPI resource object.
+ * @res: Output generic resource object.
+ *
+ * Check if the given ACPI resource object represents an extended address space
+ * resource and if that's the case, use the information in it to populate the
+ * generic resource object pointed to by @res.
+ */
+bool acpi_dev_resource_ext_address_space(struct acpi_resource *ares,
+					 struct resource *res)
+{
+	struct acpi_resource_extended_address64 *ext_addr;
+	bool window;
+	u64 len;
+	u8 io_decode;
+
+	if (ares->type != ACPI_RESOURCE_TYPE_EXTENDED_ADDRESS64)
+		return false;
+
+	ext_addr = &ares->data.ext_address64;
+
+	res->start = ext_addr->minimum;
+	res->end = ext_addr->maximum;
+	window = ext_addr->producer_consumer == ACPI_PRODUCER;
+
+	switch(ext_addr->resource_type) {
+	case ACPI_MEMORY_RANGE:
+		len = ext_addr->maximum - ext_addr->minimum + 1;
+		res->flags = acpi_dev_memresource_flags(len,
+					ext_addr->info.mem.write_protect,
+					window);
+		break;
+	case ACPI_IO_RANGE:
+		io_decode = ext_addr->granularity == 0xfff ?
+				ACPI_DECODE_10 : ACPI_DECODE_16;
+		res->flags = acpi_dev_ioresource_flags(ext_addr->minimum,
+						       ext_addr->maximum,
+						       io_decode, window);
+		break;
+	case ACPI_BUS_NUMBER_RANGE:
+		res->flags = IORESOURCE_BUS;
+		break;
+	default:
+		res->flags = 0;
+	}
+
+	return true;
+}
+EXPORT_SYMBOL_GPL(acpi_dev_resource_ext_address_space);
+
+/**
+ * acpi_dev_irq_flags - Determine IRQ resource flags.
+ * @triggering: Triggering type as provided by ACPI.
+ * @polarity: Interrupt polarity as provided by ACPI.
+ * @shareable: Whether or not the interrupt is shareable.
+ */
+unsigned long acpi_dev_irq_flags(u8 triggering, u8 polarity, u8 shareable)
+{
+	unsigned long flags;
+
+	if (triggering == ACPI_LEVEL_SENSITIVE)
+		flags = polarity == ACPI_ACTIVE_LOW ?
+			IORESOURCE_IRQ_LOWLEVEL : IORESOURCE_IRQ_HIGHLEVEL;
+	else
+		flags = polarity == ACPI_ACTIVE_LOW ?
+			IORESOURCE_IRQ_LOWEDGE : IORESOURCE_IRQ_HIGHEDGE;
+
+	if (shareable == ACPI_SHARED)
+		flags |= IORESOURCE_IRQ_SHAREABLE;
+
+	return flags | IORESOURCE_IRQ;
+}
+EXPORT_SYMBOL_GPL(acpi_dev_irq_flags);
+
+static void acpi_dev_irqresource_disabled(struct resource *res, u32 gsi)
+{
+	res->start = gsi;
+	res->end = gsi;
+	res->flags = IORESOURCE_IRQ | IORESOURCE_DISABLED;
+}
+
+static void acpi_dev_get_irqresource(struct resource *res, u32 gsi,
+				     u8 triggering, u8 polarity, u8 shareable)
+{
+	int irq, p, t;
+
+	if (!valid_IRQ(gsi)) {
+		acpi_dev_irqresource_disabled(res, gsi);
+		return;
+	}
+
+	/*
+	 * In IO-APIC mode, use overrided attribute. Two reasons:
+	 * 1. BIOS bug in DSDT
+	 * 2. BIOS uses IO-APIC mode Interrupt Source Override
+	 */
+	if (!acpi_get_override_irq(gsi, &t, &p)) {
+		u8 trig = t ? ACPI_LEVEL_SENSITIVE : ACPI_EDGE_SENSITIVE;
+		u8 pol = p ? ACPI_ACTIVE_LOW : ACPI_ACTIVE_HIGH;
+
+		if (triggering != trig || polarity != pol) {
+			pr_warning("ACPI: IRQ %d override to %s, %s\n", gsi,
+				   t ? "edge" : "level", p ? "low" : "high");
+			triggering = trig;
+			polarity = pol;
+		}
+	}
+
+	res->flags = acpi_dev_irq_flags(triggering, polarity, shareable);
+	irq = acpi_register_gsi(NULL, gsi, triggering, polarity);
+	if (irq >= 0) {
+		res->start = irq;
+		res->end = irq;
+	} else {
+		acpi_dev_irqresource_disabled(res, gsi);
+	}
+}
+
+/**
+ * acpi_dev_resource_interrupt - Extract ACPI interrupt resource information.
+ * @ares: Input ACPI resource object.
+ * @index: Index into the array of GSIs represented by the resource.
+ * @res: Output generic resource object.
+ *
+ * Check if the given ACPI resource object represents an interrupt resource
+ * and @index does not exceed the resource's interrupt count (true is returned
+ * in that case regardless of the results of the other checks)).  If that's the
+ * case, register the GSI corresponding to @index from the array of interrupts
+ * represented by the resource and populate the generic resource object pointed
+ * to by @res accordingly.  If the registration of the GSI is not successful,
+ * IORESOURCE_DISABLED will be set it that object's flags.
+ */
+bool acpi_dev_resource_interrupt(struct acpi_resource *ares, int index,
+				 struct resource *res)
+{
+	struct acpi_resource_irq *irq;
+	struct acpi_resource_extended_irq *ext_irq;
+
+	switch (ares->type) {
+	case ACPI_RESOURCE_TYPE_IRQ:
+		/*
+		 * Per spec, only one interrupt per descriptor is allowed in
+		 * _CRS, but some firmware violates this, so parse them all.
+		 */
+		irq = &ares->data.irq;
+		if (index >= irq->interrupt_count) {
+			acpi_dev_irqresource_disabled(res, 0);
+			return false;
+		}
+		acpi_dev_get_irqresource(res, irq->interrupts[index],
+					 irq->triggering, irq->polarity,
+					 irq->sharable);
+		break;
+	case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
+		ext_irq = &ares->data.extended_irq;
+		if (index >= ext_irq->interrupt_count) {
+			acpi_dev_irqresource_disabled(res, 0);
+			return false;
+		}
+		acpi_dev_get_irqresource(res, ext_irq->interrupts[index],
+					 ext_irq->triggering, ext_irq->polarity,
+					 ext_irq->sharable);
+		break;
+	default:
+		return false;
+	}
+
+	return true;
+}
+EXPORT_SYMBOL_GPL(acpi_dev_resource_interrupt);
+
+/**
+ * acpi_dev_free_resource_list - Free resource from %acpi_dev_get_resources().
+ * @list: The head of the resource list to free.
+ */
+void acpi_dev_free_resource_list(struct list_head *list)
+{
+	struct resource_list_entry *rentry, *re;
+
+	list_for_each_entry_safe(rentry, re, list, node) {
+		list_del(&rentry->node);
+		kfree(rentry);
+	}
+}
+EXPORT_SYMBOL_GPL(acpi_dev_free_resource_list);
+
+struct res_proc_context {
+	struct list_head *list;
+	int (*preproc)(struct acpi_resource *, void *);
+	void *preproc_data;
+	int count;
+	int error;
+};
+
+static acpi_status acpi_dev_new_resource_entry(struct resource *r,
+					       struct res_proc_context *c)
+{
+	struct resource_list_entry *rentry;
+
+	rentry = kmalloc(sizeof(*rentry), GFP_KERNEL);
+	if (!rentry) {
+		c->error = -ENOMEM;
+		return AE_NO_MEMORY;
+	}
+	rentry->res = *r;
+	list_add_tail(&rentry->node, c->list);
+	c->count++;
+	return AE_OK;
+}
+
+static acpi_status acpi_dev_process_resource(struct acpi_resource *ares,
+					     void *context)
+{
+	struct res_proc_context *c = context;
+	struct resource r;
+	int i;
+
+	if (c->preproc) {
+		int ret;
+
+		ret = c->preproc(ares, c->preproc_data);
+		if (ret < 0) {
+			c->error = ret;
+			return AE_CTRL_TERMINATE;
+		} else if (ret > 0) {
+			return AE_OK;
+		}
+	}
+
+	memset(&r, 0, sizeof(r));
+
+	if (acpi_dev_resource_memory(ares, &r)
+	    || acpi_dev_resource_io(ares, &r)
+	    || acpi_dev_resource_address_space(ares, &r)
+	    || acpi_dev_resource_ext_address_space(ares, &r))
+		return acpi_dev_new_resource_entry(&r, c);
+
+	for (i = 0; acpi_dev_resource_interrupt(ares, i, &r); i++) {
+		acpi_status status;
+
+		status = acpi_dev_new_resource_entry(&r, c);
+		if (ACPI_FAILURE(status))
+			return status;
+	}
+
+	return AE_OK;
+}
+
+/**
+ * acpi_dev_get_resources - Get current resources of a device.
+ * @adev: ACPI device node to get the resources for.
+ * @list: Head of the resultant list of resources (must be empty).
+ * @preproc: The caller's preprocessing routine.
+ * @preproc_data: Pointer passed to the caller's preprocessing routine.
+ *
+ * Evaluate the _CRS method for the given device node and process its output by
+ * (1) executing the @preproc() rountine provided by the caller, passing the
+ * resource pointer and @preproc_data to it as arguments, for each ACPI resource
+ * returned and (2) converting all of the returned ACPI resources into struct
+ * resource objects if possible.  If the return value of @preproc() in step (1)
+ * is different from 0, step (2) is not applied to the given ACPI resource and
+ * if that value is negative, the whole processing is aborted and that value is
+ * returned as the final error code.
+ *
+ * The resultant struct resource objects are put on the list pointed to by
+ * @list, that must be empty initially, as members of struct resource_list_entry
+ * objects.  Callers of this routine should use %acpi_dev_free_resource_list() to
+ * free that list.
+ *
+ * The number of resources in the output list is returned on success, an error
+ * code reflecting the error condition is returned otherwise.
+ */
+int acpi_dev_get_resources(struct acpi_device *adev, struct list_head *list,
+			   int (*preproc)(struct acpi_resource *, void *),
+			   void *preproc_data)
+{
+	struct res_proc_context c;
+	acpi_handle not_used;
+	acpi_status status;
+
+	if (!adev || !adev->handle || !list_empty(list))
+		return -EINVAL;
+
+	status = acpi_get_handle(adev->handle, METHOD_NAME__CRS, &not_used);
+	if (ACPI_FAILURE(status))
+		return 0;
+
+	c.list = list;
+	c.preproc = preproc;
+	c.preproc_data = preproc_data;
+	c.count = 0;
+	c.error = 0;
+	status = acpi_walk_resources(adev->handle, METHOD_NAME__CRS,
+				     acpi_dev_process_resource, &c);
+	if (ACPI_FAILURE(status)) {
+		acpi_dev_free_resource_list(list);
+		return c.error ? c.error : -EIO;
+	}
+
+	return c.count;
+}
+EXPORT_SYMBOL_GPL(acpi_dev_get_resources);
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index 1fcb867..53502d1 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -29,6 +29,27 @@
 
 static const char *dummy_hid = "device";
 
+/*
+ * The following ACPI IDs are known to be suitable for representing as
+ * platform devices.
+ */
+static const struct acpi_device_id acpi_platform_device_ids[] = {
+
+	{ "PNP0D40" },
+
+	/* Haswell LPSS devices */
+	{ "INT33C0", 0 },
+	{ "INT33C1", 0 },
+	{ "INT33C2", 0 },
+	{ "INT33C3", 0 },
+	{ "INT33C4", 0 },
+	{ "INT33C5", 0 },
+	{ "INT33C6", 0 },
+	{ "INT33C7", 0 },
+
+	{ }
+};
+
 static LIST_HEAD(acpi_device_list);
 static LIST_HEAD(acpi_bus_id_list);
 DEFINE_MUTEX(acpi_device_lock);
@@ -97,6 +118,7 @@
 	struct acpi_eject_event *ej_event = (struct acpi_eject_event *) context;
 	struct acpi_device *device;
 	acpi_handle handle = ej_event->handle;
+	acpi_handle temp;
 	struct acpi_object_list arg_list;
 	union acpi_object arg;
 	acpi_status status = AE_OK;
@@ -117,13 +139,16 @@
 		goto err_out;
 	}
 
+	/* device has been freed */
+	device = NULL;
+
 	/* power off device */
 	status = acpi_evaluate_object(handle, "_PS3", NULL, NULL);
 	if (ACPI_FAILURE(status) && status != AE_NOT_FOUND)
 		printk(KERN_WARNING PREFIX
 				"Power-off device failed\n");
 
-	if (device->flags.lockable) {
+	if (ACPI_SUCCESS(acpi_get_handle(handle, "_LCK", &temp))) {
 		arg_list.count = 1;
 		arg_list.pointer = &arg;
 		arg.type = ACPI_TYPE_INTEGER;
@@ -157,6 +182,7 @@
 	kfree(context);
 	return;
 }
+EXPORT_SYMBOL(acpi_bus_hot_remove_device);
 
 static ssize_t
 acpi_eject_store(struct device *d, struct device_attribute *attr,
@@ -216,6 +242,25 @@
 }
 static DEVICE_ATTR(hid, 0444, acpi_device_hid_show, NULL);
 
+static ssize_t acpi_device_uid_show(struct device *dev,
+				    struct device_attribute *attr, char *buf)
+{
+	struct acpi_device *acpi_dev = to_acpi_device(dev);
+
+	return sprintf(buf, "%s\n", acpi_dev->pnp.unique_id);
+}
+static DEVICE_ATTR(uid, 0444, acpi_device_uid_show, NULL);
+
+static ssize_t acpi_device_adr_show(struct device *dev,
+				    struct device_attribute *attr, char *buf)
+{
+	struct acpi_device *acpi_dev = to_acpi_device(dev);
+
+	return sprintf(buf, "0x%08x\n",
+		       (unsigned int)(acpi_dev->pnp.bus_address));
+}
+static DEVICE_ATTR(adr, 0444, acpi_device_adr_show, NULL);
+
 static ssize_t
 acpi_device_path_show(struct device *dev, struct device_attribute *attr, char *buf) {
 	struct acpi_device *acpi_dev = to_acpi_device(dev);
@@ -259,11 +304,21 @@
 }
 static DEVICE_ATTR(description, 0444, description_show, NULL);
 
+static ssize_t
+acpi_device_sun_show(struct device *dev, struct device_attribute *attr,
+		     char *buf) {
+	struct acpi_device *acpi_dev = to_acpi_device(dev);
+
+	return sprintf(buf, "%lu\n", acpi_dev->pnp.sun);
+}
+static DEVICE_ATTR(sun, 0444, acpi_device_sun_show, NULL);
+
 static int acpi_device_setup_files(struct acpi_device *dev)
 {
 	struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
 	acpi_status status;
 	acpi_handle temp;
+	unsigned long long sun;
 	int result = 0;
 
 	/*
@@ -300,6 +355,21 @@
 			goto end;
 	}
 
+	if (dev->flags.bus_address)
+		result = device_create_file(&dev->dev, &dev_attr_adr);
+	if (dev->pnp.unique_id)
+		result = device_create_file(&dev->dev, &dev_attr_uid);
+
+	status = acpi_evaluate_integer(dev->handle, "_SUN", NULL, &sun);
+	if (ACPI_SUCCESS(status)) {
+		dev->pnp.sun = (unsigned long)sun;
+		result = device_create_file(&dev->dev, &dev_attr_sun);
+		if (result)
+			goto end;
+	} else {
+		dev->pnp.sun = (unsigned long)-1;
+	}
+
         /*
          * If device has _EJ0, 'eject' file is created that is used to trigger
          * hot-removal function from userland.
@@ -331,6 +401,14 @@
 	if (ACPI_SUCCESS(status))
 		device_remove_file(&dev->dev, &dev_attr_eject);
 
+	status = acpi_get_handle(dev->handle, "_SUN", &temp);
+	if (ACPI_SUCCESS(status))
+		device_remove_file(&dev->dev, &dev_attr_sun);
+
+	if (dev->pnp.unique_id)
+		device_remove_file(&dev->dev, &dev_attr_uid);
+	if (dev->flags.bus_address)
+		device_remove_file(&dev->dev, &dev_attr_adr);
 	device_remove_file(&dev->dev, &dev_attr_modalias);
 	device_remove_file(&dev->dev, &dev_attr_hid);
 	if (dev->handle)
@@ -340,8 +418,8 @@
 			ACPI Bus operations
    -------------------------------------------------------------------------- */
 
-int acpi_match_device_ids(struct acpi_device *device,
-			  const struct acpi_device_id *ids)
+static const struct acpi_device_id *__acpi_match_device(
+	struct acpi_device *device, const struct acpi_device_id *ids)
 {
 	const struct acpi_device_id *id;
 	struct acpi_hardware_id *hwid;
@@ -351,14 +429,44 @@
 	 * driver for it.
 	 */
 	if (!device->status.present)
-		return -ENODEV;
+		return NULL;
 
 	for (id = ids; id->id[0]; id++)
 		list_for_each_entry(hwid, &device->pnp.ids, list)
 			if (!strcmp((char *) id->id, hwid->id))
-				return 0;
+				return id;
 
-	return -ENOENT;
+	return NULL;
+}
+
+/**
+ * acpi_match_device - Match a struct device against a given list of ACPI IDs
+ * @ids: Array of struct acpi_device_id object to match against.
+ * @dev: The device structure to match.
+ *
+ * Check if @dev has a valid ACPI handle and if there is a struct acpi_device
+ * object for that handle and use that object to match against a given list of
+ * device IDs.
+ *
+ * Return a pointer to the first matching ID on success or %NULL on failure.
+ */
+const struct acpi_device_id *acpi_match_device(const struct acpi_device_id *ids,
+					       const struct device *dev)
+{
+	struct acpi_device *adev;
+
+	if (!ids || !ACPI_HANDLE(dev)
+	    || ACPI_FAILURE(acpi_bus_get_device(ACPI_HANDLE(dev), &adev)))
+		return NULL;
+
+	return __acpi_match_device(adev, ids);
+}
+EXPORT_SYMBOL_GPL(acpi_match_device);
+
+int acpi_match_device_ids(struct acpi_device *device,
+			  const struct acpi_device_id *ids)
+{
+	return __acpi_match_device(device, ids) ? 0 : -ENOENT;
 }
 EXPORT_SYMBOL(acpi_match_device_ids);
 
@@ -377,6 +485,7 @@
 	struct acpi_device *acpi_dev = to_acpi_device(dev);
 
 	acpi_free_ids(acpi_dev);
+	kfree(acpi_dev->pnp.unique_id);
 	kfree(acpi_dev);
 }
 
@@ -859,8 +968,8 @@
 static void acpi_bus_set_run_wake_flags(struct acpi_device *device)
 {
 	struct acpi_device_id button_device_ids[] = {
-		{"PNP0C0D", 0},
 		{"PNP0C0C", 0},
+		{"PNP0C0D", 0},
 		{"PNP0C0E", 0},
 		{"", 0},
 	};
@@ -872,6 +981,11 @@
 	/* Power button, Lid switch always enable wakeup */
 	if (!acpi_match_device_ids(device, button_device_ids)) {
 		device->wakeup.flags.run_wake = 1;
+		if (!acpi_match_device_ids(device, &button_device_ids[1])) {
+			/* Do not use Lid/sleep button for S5 wakeup */
+			if (device->wakeup.sleep_state == ACPI_STATE_S5)
+				device->wakeup.sleep_state = ACPI_STATE_S4;
+		}
 		device_set_wakeup_capable(&device->dev, true);
 		return;
 	}
@@ -965,8 +1079,10 @@
 		 * D3hot is only valid if _PR3 present.
 		 */
 		if (ps->resources.count ||
-		    (ps->flags.explicit_set && i < ACPI_STATE_D3_HOT))
+		    (ps->flags.explicit_set && i < ACPI_STATE_D3_HOT)) {
 			ps->flags.valid = 1;
+			ps->flags.os_accessible = 1;
+		}
 
 		ps->power = -1;	/* Unknown - driver assigned */
 		ps->latency = -1;	/* Unknown - driver assigned */
@@ -982,6 +1098,11 @@
 	if (device->power.states[ACPI_STATE_D3_HOT].flags.explicit_set)
 		device->power.states[ACPI_STATE_D3_COLD].flags.explicit_set = 1;
 
+	/* Presence of _PS3 or _PRx means we can put the device into D3 cold */
+	if (device->power.states[ACPI_STATE_D3_HOT].flags.explicit_set ||
+			device->power.flags.power_resources)
+		device->power.states[ACPI_STATE_D3_COLD].flags.os_accessible = 1;
+
 	acpi_bus_init_power(device);
 
 	return 0;
@@ -1013,11 +1134,6 @@
 			device->flags.ejectable = 1;
 	}
 
-	/* Presence of _LCK indicates 'lockable' */
-	status = acpi_get_handle(device->handle, "_LCK", &temp);
-	if (ACPI_SUCCESS(status))
-		device->flags.lockable = 1;
-
 	/* Power resources cannot be power manageable. */
 	if (device->device_type == ACPI_BUS_TYPE_POWER)
 		return 0;
@@ -1185,7 +1301,7 @@
 {
 	acpi_status status;
 	struct acpi_device_info *info;
-	struct acpica_device_id_list *cid_list;
+	struct acpi_pnp_device_id_list *cid_list;
 	int i;
 
 	switch (device->device_type) {
@@ -1212,6 +1328,9 @@
 			device->pnp.bus_address = info->address;
 			device->flags.bus_address = 1;
 		}
+		if (info->valid & ACPI_VALID_UID)
+			device->pnp.unique_id = kstrdup(info->unique_id.string,
+							GFP_KERNEL);
 
 		kfree(info);
 
@@ -1483,8 +1602,13 @@
 	 */
 	device = NULL;
 	acpi_bus_get_device(handle, &device);
-	if (ops->acpi_op_add && !device)
+	if (ops->acpi_op_add && !device) {
 		acpi_add_single_object(&device, handle, type, sta, ops);
+		/* Is the device a known good platform device? */
+		if (device
+		    && !acpi_match_device_ids(device, acpi_platform_device_ids))
+			acpi_create_platform_device(device);
+	}
 
 	if (!device)
 		return AE_CTRL_DEPTH;
diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index fdcdbb6..2fcc67d 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -18,7 +18,6 @@
 #include <linux/reboot.h>
 #include <linux/acpi.h>
 #include <linux/module.h>
-#include <linux/pm_runtime.h>
 
 #include <asm/io.h>
 
@@ -81,6 +80,12 @@
 
 #ifdef CONFIG_ACPI_SLEEP
 static u32 acpi_target_sleep_state = ACPI_STATE_S0;
+
+u32 acpi_target_system_state(void)
+{
+	return acpi_target_sleep_state;
+}
+
 static bool pwr_btn_event_pending;
 
 /*
@@ -98,6 +103,21 @@
 }
 
 /*
+ * The ACPI specification wants us to save NVS memory regions during hibernation
+ * but says nothing about saving NVS during S3.  Not all versions of Windows
+ * save NVS on S3 suspend either, and it is clear that not all systems need
+ * NVS to be saved at S3 time.  To improve suspend/resume time, allow the
+ * user to disable saving NVS on S3 if their system does not require it, but
+ * continue to save/restore NVS for S4 as specified.
+ */
+static bool nvs_nosave_s3;
+
+void __init acpi_nvs_nosave_s3(void)
+{
+	nvs_nosave_s3 = true;
+}
+
+/*
  * ACPI 1.0 wants us to execute _PTS before suspending devices, so we allow the
  * user to request that behavior by using the 'acpi_old_suspend_ordering'
  * kernel command line option that causes the following variable to be set.
@@ -109,6 +129,180 @@
 	old_suspend_ordering = true;
 }
 
+static int __init init_old_suspend_ordering(const struct dmi_system_id *d)
+{
+	acpi_old_suspend_ordering();
+	return 0;
+}
+
+static int __init init_nvs_nosave(const struct dmi_system_id *d)
+{
+	acpi_nvs_nosave();
+	return 0;
+}
+
+static struct dmi_system_id __initdata acpisleep_dmi_table[] = {
+	{
+	.callback = init_old_suspend_ordering,
+	.ident = "Abit KN9 (nForce4 variant)",
+	.matches = {
+		DMI_MATCH(DMI_BOARD_VENDOR, "http://www.abit.com.tw/"),
+		DMI_MATCH(DMI_BOARD_NAME, "KN9 Series(NF-CK804)"),
+		},
+	},
+	{
+	.callback = init_old_suspend_ordering,
+	.ident = "HP xw4600 Workstation",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "HP xw4600 Workstation"),
+		},
+	},
+	{
+	.callback = init_old_suspend_ordering,
+	.ident = "Asus Pundit P1-AH2 (M2N8L motherboard)",
+	.matches = {
+		DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTek Computer INC."),
+		DMI_MATCH(DMI_BOARD_NAME, "M2N8L"),
+		},
+	},
+	{
+	.callback = init_old_suspend_ordering,
+	.ident = "Panasonic CF51-2L",
+	.matches = {
+		DMI_MATCH(DMI_BOARD_VENDOR,
+				"Matsushita Electric Industrial Co.,Ltd."),
+		DMI_MATCH(DMI_BOARD_NAME, "CF51-2L"),
+		},
+	},
+	{
+	.callback = init_nvs_nosave,
+	.ident = "Sony Vaio VGN-FW21E",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW21E"),
+		},
+	},
+	{
+	.callback = init_nvs_nosave,
+	.ident = "Sony Vaio VPCEB17FX",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB17FX"),
+		},
+	},
+	{
+	.callback = init_nvs_nosave,
+	.ident = "Sony Vaio VGN-SR11M",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SR11M"),
+		},
+	},
+	{
+	.callback = init_nvs_nosave,
+	.ident = "Everex StepNote Series",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Everex Systems, Inc."),
+		DMI_MATCH(DMI_PRODUCT_NAME, "Everex StepNote Series"),
+		},
+	},
+	{
+	.callback = init_nvs_nosave,
+	.ident = "Sony Vaio VPCEB1Z1E",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB1Z1E"),
+		},
+	},
+	{
+	.callback = init_nvs_nosave,
+	.ident = "Sony Vaio VGN-NW130D",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "VGN-NW130D"),
+		},
+	},
+	{
+	.callback = init_nvs_nosave,
+	.ident = "Sony Vaio VPCCW29FX",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "VPCCW29FX"),
+		},
+	},
+	{
+	.callback = init_nvs_nosave,
+	.ident = "Averatec AV1020-ED2",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "AVERATEC"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "1000 Series"),
+		},
+	},
+	{
+	.callback = init_old_suspend_ordering,
+	.ident = "Asus A8N-SLI DELUXE",
+	.matches = {
+		DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+		DMI_MATCH(DMI_BOARD_NAME, "A8N-SLI DELUXE"),
+		},
+	},
+	{
+	.callback = init_old_suspend_ordering,
+	.ident = "Asus A8N-SLI Premium",
+	.matches = {
+		DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+		DMI_MATCH(DMI_BOARD_NAME, "A8N-SLI Premium"),
+		},
+	},
+	{
+	.callback = init_nvs_nosave,
+	.ident = "Sony Vaio VGN-SR26GN_P",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SR26GN_P"),
+		},
+	},
+	{
+	.callback = init_nvs_nosave,
+	.ident = "Sony Vaio VPCEB1S1E",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB1S1E"),
+		},
+	},
+	{
+	.callback = init_nvs_nosave,
+	.ident = "Sony Vaio VGN-FW520F",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW520F"),
+		},
+	},
+	{
+	.callback = init_nvs_nosave,
+	.ident = "Asus K54C",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
+		DMI_MATCH(DMI_PRODUCT_NAME, "K54C"),
+		},
+	},
+	{
+	.callback = init_nvs_nosave,
+	.ident = "Asus K54HR",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
+		DMI_MATCH(DMI_PRODUCT_NAME, "K54HR"),
+		},
+	},
+	{},
+};
+
+static void acpi_sleep_dmi_check(void)
+{
+	dmi_check_system(acpisleep_dmi_table);
+}
+
 /**
  * acpi_pm_freeze - Disable the GPEs and suspend EC transactions.
  */
@@ -224,6 +418,7 @@
 }
 #else /* !CONFIG_ACPI_SLEEP */
 #define acpi_target_sleep_state	ACPI_STATE_S0
+static inline void acpi_sleep_dmi_check(void) {}
 #endif /* CONFIG_ACPI_SLEEP */
 
 #ifdef CONFIG_SUSPEND
@@ -243,7 +438,7 @@
 	u32 acpi_state = acpi_suspend_states[pm_state];
 	int error = 0;
 
-	error = nvs_nosave ? 0 : suspend_nvs_alloc();
+	error = (nvs_nosave || nvs_nosave_s3) ? 0 : suspend_nvs_alloc();
 	if (error)
 		return error;
 
@@ -382,167 +577,6 @@
 	.end = acpi_pm_end,
 	.recover = acpi_pm_finish,
 };
-
-static int __init init_old_suspend_ordering(const struct dmi_system_id *d)
-{
-	old_suspend_ordering = true;
-	return 0;
-}
-
-static int __init init_nvs_nosave(const struct dmi_system_id *d)
-{
-	acpi_nvs_nosave();
-	return 0;
-}
-
-static struct dmi_system_id __initdata acpisleep_dmi_table[] = {
-	{
-	.callback = init_old_suspend_ordering,
-	.ident = "Abit KN9 (nForce4 variant)",
-	.matches = {
-		DMI_MATCH(DMI_BOARD_VENDOR, "http://www.abit.com.tw/"),
-		DMI_MATCH(DMI_BOARD_NAME, "KN9 Series(NF-CK804)"),
-		},
-	},
-	{
-	.callback = init_old_suspend_ordering,
-	.ident = "HP xw4600 Workstation",
-	.matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
-		DMI_MATCH(DMI_PRODUCT_NAME, "HP xw4600 Workstation"),
-		},
-	},
-	{
-	.callback = init_old_suspend_ordering,
-	.ident = "Asus Pundit P1-AH2 (M2N8L motherboard)",
-	.matches = {
-		DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTek Computer INC."),
-		DMI_MATCH(DMI_BOARD_NAME, "M2N8L"),
-		},
-	},
-	{
-	.callback = init_old_suspend_ordering,
-	.ident = "Panasonic CF51-2L",
-	.matches = {
-		DMI_MATCH(DMI_BOARD_VENDOR,
-				"Matsushita Electric Industrial Co.,Ltd."),
-		DMI_MATCH(DMI_BOARD_NAME, "CF51-2L"),
-		},
-	},
-	{
-	.callback = init_nvs_nosave,
-	.ident = "Sony Vaio VGN-FW21E",
-	.matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
-		DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW21E"),
-		},
-	},
-	{
-	.callback = init_nvs_nosave,
-	.ident = "Sony Vaio VPCEB17FX",
-	.matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
-		DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB17FX"),
-		},
-	},
-	{
-	.callback = init_nvs_nosave,
-	.ident = "Sony Vaio VGN-SR11M",
-	.matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
-		DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SR11M"),
-		},
-	},
-	{
-	.callback = init_nvs_nosave,
-	.ident = "Everex StepNote Series",
-	.matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "Everex Systems, Inc."),
-		DMI_MATCH(DMI_PRODUCT_NAME, "Everex StepNote Series"),
-		},
-	},
-	{
-	.callback = init_nvs_nosave,
-	.ident = "Sony Vaio VPCEB1Z1E",
-	.matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
-		DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB1Z1E"),
-		},
-	},
-	{
-	.callback = init_nvs_nosave,
-	.ident = "Sony Vaio VGN-NW130D",
-	.matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
-		DMI_MATCH(DMI_PRODUCT_NAME, "VGN-NW130D"),
-		},
-	},
-	{
-	.callback = init_nvs_nosave,
-	.ident = "Sony Vaio VPCCW29FX",
-	.matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
-		DMI_MATCH(DMI_PRODUCT_NAME, "VPCCW29FX"),
-		},
-	},
-	{
-	.callback = init_nvs_nosave,
-	.ident = "Averatec AV1020-ED2",
-	.matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "AVERATEC"),
-		DMI_MATCH(DMI_PRODUCT_NAME, "1000 Series"),
-		},
-	},
-	{
-	.callback = init_old_suspend_ordering,
-	.ident = "Asus A8N-SLI DELUXE",
-	.matches = {
-		DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
-		DMI_MATCH(DMI_BOARD_NAME, "A8N-SLI DELUXE"),
-		},
-	},
-	{
-	.callback = init_old_suspend_ordering,
-	.ident = "Asus A8N-SLI Premium",
-	.matches = {
-		DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
-		DMI_MATCH(DMI_BOARD_NAME, "A8N-SLI Premium"),
-		},
-	},
-	{
-	.callback = init_nvs_nosave,
-	.ident = "Sony Vaio VGN-SR26GN_P",
-	.matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
-		DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SR26GN_P"),
-		},
-	},
-	{
-	.callback = init_nvs_nosave,
-	.ident = "Sony Vaio VGN-FW520F",
-	.matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
-		DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW520F"),
-		},
-	},
-	{
-	.callback = init_nvs_nosave,
-	.ident = "Asus K54C",
-	.matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
-		DMI_MATCH(DMI_PRODUCT_NAME, "K54C"),
-		},
-	},
-	{
-	.callback = init_nvs_nosave,
-	.ident = "Asus K54HR",
-	.matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
-		DMI_MATCH(DMI_PRODUCT_NAME, "K54HR"),
-		},
-	},
-	{},
-};
 #endif /* CONFIG_SUSPEND */
 
 #ifdef CONFIG_HIBERNATION
@@ -681,177 +715,6 @@
 	return -EINVAL;
 }
 
-#ifdef CONFIG_PM
-/**
- *	acpi_pm_device_sleep_state - return preferred power state of ACPI device
- *		in the system sleep state given by %acpi_target_sleep_state
- *	@dev: device to examine; its driver model wakeup flags control
- *		whether it should be able to wake up the system
- *	@d_min_p: used to store the upper limit of allowed states range
- *	@d_max_in: specify the lowest allowed states
- *	Return value: preferred power state of the device on success, -ENODEV
- *	(ie. if there's no 'struct acpi_device' for @dev) or -EINVAL on failure
- *
- *	Find the lowest power (highest number) ACPI device power state that
- *	device @dev can be in while the system is in the sleep state represented
- *	by %acpi_target_sleep_state.  If @wake is nonzero, the device should be
- *	able to wake up the system from this sleep state.  If @d_min_p is set,
- *	the highest power (lowest number) device power state of @dev allowed
- *	in this system sleep state is stored at the location pointed to by it.
- *
- *	The caller must ensure that @dev is valid before using this function.
- *	The caller is also responsible for figuring out if the device is
- *	supposed to be able to wake up the system and passing this information
- *	via @wake.
- */
-
-int acpi_pm_device_sleep_state(struct device *dev, int *d_min_p, int d_max_in)
-{
-	acpi_handle handle = DEVICE_ACPI_HANDLE(dev);
-	struct acpi_device *adev;
-	char acpi_method[] = "_SxD";
-	unsigned long long d_min, d_max;
-
-	if (d_max_in < ACPI_STATE_D0 || d_max_in > ACPI_STATE_D3)
-		return -EINVAL;
-	if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) {
-		printk(KERN_DEBUG "ACPI handle has no context!\n");
-		return -ENODEV;
-	}
-
-	acpi_method[2] = '0' + acpi_target_sleep_state;
-	/*
-	 * If the sleep state is S0, the lowest limit from ACPI is D3,
-	 * but if the device has _S0W, we will use the value from _S0W
-	 * as the lowest limit from ACPI.  Finally, we will constrain
-	 * the lowest limit with the specified one.
-	 */
-	d_min = ACPI_STATE_D0;
-	d_max = ACPI_STATE_D3;
-
-	/*
-	 * If present, _SxD methods return the minimum D-state (highest power
-	 * state) we can use for the corresponding S-states.  Otherwise, the
-	 * minimum D-state is D0 (ACPI 3.x).
-	 *
-	 * NOTE: We rely on acpi_evaluate_integer() not clobbering the integer
-	 * provided -- that's our fault recovery, we ignore retval.
-	 */
-	if (acpi_target_sleep_state > ACPI_STATE_S0)
-		acpi_evaluate_integer(handle, acpi_method, NULL, &d_min);
-
-	/*
-	 * If _PRW says we can wake up the system from the target sleep state,
-	 * the D-state returned by _SxD is sufficient for that (we assume a
-	 * wakeup-aware driver if wake is set).  Still, if _SxW exists
-	 * (ACPI 3.x), it should return the maximum (lowest power) D-state that
-	 * can wake the system.  _S0W may be valid, too.
-	 */
-	if (acpi_target_sleep_state == ACPI_STATE_S0 ||
-	    (device_may_wakeup(dev) && adev->wakeup.flags.valid &&
-	     adev->wakeup.sleep_state >= acpi_target_sleep_state)) {
-		acpi_status status;
-
-		acpi_method[3] = 'W';
-		status = acpi_evaluate_integer(handle, acpi_method, NULL,
-						&d_max);
-		if (ACPI_FAILURE(status)) {
-			if (acpi_target_sleep_state != ACPI_STATE_S0 ||
-			    status != AE_NOT_FOUND)
-				d_max = d_min;
-		} else if (d_max < d_min) {
-			/* Warn the user of the broken DSDT */
-			printk(KERN_WARNING "ACPI: Wrong value from %s\n",
-				acpi_method);
-			/* Sanitize it */
-			d_min = d_max;
-		}
-	}
-
-	if (d_max_in < d_min)
-		return -EINVAL;
-	if (d_min_p)
-		*d_min_p = d_min;
-	/* constrain d_max with specified lowest limit (max number) */
-	if (d_max > d_max_in) {
-		for (d_max = d_max_in; d_max > d_min; d_max--) {
-			if (adev->power.states[d_max].flags.valid)
-				break;
-		}
-	}
-	return d_max;
-}
-EXPORT_SYMBOL(acpi_pm_device_sleep_state);
-#endif /* CONFIG_PM */
-
-#ifdef CONFIG_PM_SLEEP
-/**
- * acpi_pm_device_run_wake - Enable/disable wake-up for given device.
- * @phys_dev: Device to enable/disable the platform to wake-up the system for.
- * @enable: Whether enable or disable the wake-up functionality.
- *
- * Find the ACPI device object corresponding to @pci_dev and try to
- * enable/disable the GPE associated with it.
- */
-int acpi_pm_device_run_wake(struct device *phys_dev, bool enable)
-{
-	struct acpi_device *dev;
-	acpi_handle handle;
-
-	if (!device_run_wake(phys_dev))
-		return -EINVAL;
-
-	handle = DEVICE_ACPI_HANDLE(phys_dev);
-	if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &dev))) {
-		dev_dbg(phys_dev, "ACPI handle has no context in %s!\n",
-			__func__);
-		return -ENODEV;
-	}
-
-	if (enable) {
-		acpi_enable_wakeup_device_power(dev, ACPI_STATE_S0);
-		acpi_enable_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number);
-	} else {
-		acpi_disable_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number);
-		acpi_disable_wakeup_device_power(dev);
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL(acpi_pm_device_run_wake);
-
-/**
- *	acpi_pm_device_sleep_wake - enable or disable the system wake-up
- *                                  capability of given device
- *	@dev: device to handle
- *	@enable: 'true' - enable, 'false' - disable the wake-up capability
- */
-int acpi_pm_device_sleep_wake(struct device *dev, bool enable)
-{
-	acpi_handle handle;
-	struct acpi_device *adev;
-	int error;
-
-	if (!device_can_wakeup(dev))
-		return -EINVAL;
-
-	handle = DEVICE_ACPI_HANDLE(dev);
-	if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) {
-		dev_dbg(dev, "ACPI handle has no context in %s!\n", __func__);
-		return -ENODEV;
-	}
-
-	error = enable ?
-		acpi_enable_wakeup_device_power(adev, acpi_target_sleep_state) :
-		acpi_disable_wakeup_device_power(adev);
-	if (!error)
-		dev_info(dev, "wake-up capability %s by ACPI\n",
-				enable ? "enabled" : "disabled");
-
-	return error;
-}
-#endif  /* CONFIG_PM_SLEEP */
-
 static void acpi_power_off_prepare(void)
 {
 	/* Prepare to power off the system */
@@ -873,13 +736,13 @@
 	u8 type_a, type_b;
 #ifdef CONFIG_SUSPEND
 	int i = 0;
-
-	dmi_check_system(acpisleep_dmi_table);
 #endif
 
 	if (acpi_disabled)
 		return 0;
 
+	acpi_sleep_dmi_check();
+
 	sleep_states[ACPI_STATE_S0] = 1;
 	printk(KERN_INFO PREFIX "(supports S0");
 
diff --git a/drivers/acpi/sysfs.c b/drivers/acpi/sysfs.c
index 7c3f98b..ea61ca9 100644
--- a/drivers/acpi/sysfs.c
+++ b/drivers/acpi/sysfs.c
@@ -476,7 +476,7 @@
 	return;
 }
 
-static void acpi_gbl_event_handler(u32 event_type, acpi_handle device,
+static void acpi_global_event_handler(u32 event_type, acpi_handle device,
 	u32 event_number, void *context)
 {
 	if (event_type == ACPI_EVENT_TYPE_GPE)
@@ -638,7 +638,7 @@
 	if (all_counters == NULL)
 		goto fail;
 
-	status = acpi_install_global_event_handler(acpi_gbl_event_handler, NULL);
+	status = acpi_install_global_event_handler(acpi_global_event_handler, NULL);
 	if (ACPI_FAILURE(status))
 		goto fail;
 
diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index 804204d..6e8cc16 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -984,6 +984,38 @@
 	}
 }
 
+/*
+ * On some platforms, the AML code has dependency about
+ * the evaluating order of _TMP and _CRT/_HOT/_PSV/_ACx.
+ * 1. On HP Pavilion G4-1016tx, _TMP must be invoked after
+ *    /_CRT/_HOT/_PSV/_ACx, or else system will be power off.
+ * 2. On HP Compaq 6715b/6715s, the return value of _PSV is 0
+ *    if _TMP has never been evaluated.
+ *
+ * As this dependency is totally transparent to OS, evaluate
+ * all of them once, in the order of _CRT/_HOT/_PSV/_ACx,
+ * _TMP, before they are actually used.
+ */
+static void acpi_thermal_aml_dependency_fix(struct acpi_thermal *tz)
+{
+	acpi_handle handle = tz->device->handle;
+	unsigned long long value;
+	int i;
+
+	acpi_evaluate_integer(handle, "_CRT", NULL, &value);
+	acpi_evaluate_integer(handle, "_HOT", NULL, &value);
+	acpi_evaluate_integer(handle, "_PSV", NULL, &value);
+	for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
+		char name[5] = { '_', 'A', 'C', ('0' + i), '\0' };
+		acpi_status status;
+
+		status = acpi_evaluate_integer(handle, name, NULL, &value);
+		if (status == AE_NOT_FOUND)
+			break;
+	}
+	acpi_evaluate_integer(handle, "_TMP", NULL, &value);
+}
+
 static int acpi_thermal_get_info(struct acpi_thermal *tz)
 {
 	int result = 0;
@@ -992,6 +1024,8 @@
 	if (!tz)
 		return -EINVAL;
 
+	acpi_thermal_aml_dependency_fix(tz);
+
 	/* Get trip points [_CRT, _PSV, etc.] (required) */
 	result = acpi_thermal_get_trip_points(tz);
 	if (result)
diff --git a/drivers/acpi/utils.c b/drivers/acpi/utils.c
index 462f7e3..74437130 100644
--- a/drivers/acpi/utils.c
+++ b/drivers/acpi/utils.c
@@ -28,6 +28,8 @@
 #include <linux/slab.h>
 #include <linux/init.h>
 #include <linux/types.h>
+#include <linux/hardirq.h>
+#include <linux/acpi.h>
 #include <acpi/acpi_bus.h>
 #include <acpi/acpi_drivers.h>
 
@@ -457,3 +459,39 @@
 #endif
 }
 EXPORT_SYMBOL(acpi_evaluate_hotplug_ost);
+
+/**
+ * acpi_handle_printk: Print message with ACPI prefix and object path
+ *
+ * This function is called through acpi_handle_<level> macros and prints
+ * a message with ACPI prefix and object path.  This function acquires
+ * the global namespace mutex to obtain an object path.  In interrupt
+ * context, it shows the object path as <n/a>.
+ */
+void
+acpi_handle_printk(const char *level, acpi_handle handle, const char *fmt, ...)
+{
+	struct va_format vaf;
+	va_list args;
+	struct acpi_buffer buffer = {
+		.length = ACPI_ALLOCATE_BUFFER,
+		.pointer = NULL
+	};
+	const char *path;
+
+	va_start(args, fmt);
+	vaf.fmt = fmt;
+	vaf.va = &args;
+
+	if (in_interrupt() ||
+	    acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer) != AE_OK)
+		path = "<n/a>";
+	else
+		path = buffer.pointer;
+
+	printk("%sACPI: %s: %pV", level, path, &vaf);
+
+	va_end(args);
+	kfree(buffer.pointer);
+}
+EXPORT_SYMBOL(acpi_handle_printk);
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index 0230cb6..ac9a69c 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -389,6 +389,12 @@
 	return 0;
 }
 
+static int video_ignore_initial_backlight(const struct dmi_system_id *d)
+{
+	use_bios_initial_backlight = 0;
+	return 0;
+}
+
 static struct dmi_system_id video_dmi_table[] __initdata = {
 	/*
 	 * Broken _BQC workaround http://bugzilla.kernel.org/show_bug.cgi?id=13121
@@ -433,6 +439,14 @@
 		DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 7720"),
 		},
 	},
+	{
+	 .callback = video_ignore_initial_backlight,
+	 .ident = "HP Folio 13-2000",
+	 .matches = {
+		DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "HP Folio 13 - 2000 Notebook PC"),
+		},
+	},
 	{}
 };
 
diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c
index b728880..4ac2593 100644
--- a/drivers/acpi/video_detect.c
+++ b/drivers/acpi/video_detect.c
@@ -156,6 +156,14 @@
 		DMI_MATCH(DMI_BOARD_NAME, "X360"),
 		},
 	},
+	{
+	.callback = video_detect_force_vendor,
+	.ident = "Asus UL30VT",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
+		DMI_MATCH(DMI_PRODUCT_NAME, "UL30VT"),
+		},
+	},
 	{ },
 };
 
diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
index b1ae480..b7078af 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -238,7 +238,7 @@
 	return 0;
 }
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 static int ahci_suspend(struct device *dev)
 {
 	struct ahci_platform_data *pdata = dev_get_platdata(dev);
diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c
index fd9ecf7..5b0ba3f 100644
--- a/drivers/ata/libata-acpi.c
+++ b/drivers/ata/libata-acpi.c
@@ -1105,10 +1105,15 @@
 	struct acpi_device *acpi_dev;
 	struct acpi_device_power_state *states;
 
-	if (ap->flags & ATA_FLAG_ACPI_SATA)
-		ata_dev = &ap->link.device[sdev->channel];
-	else
+	if (ap->flags & ATA_FLAG_ACPI_SATA) {
+		if (!sata_pmp_attached(ap))
+			ata_dev = &ap->link.device[sdev->id];
+		else
+			ata_dev = &ap->pmp_link[sdev->channel].device[sdev->id];
+	}
+	else {
 		ata_dev = &ap->link.device[sdev->id];
+	}
 
 	*handle = ata_dev_acpi_handle(ata_dev);
 
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 3cc7096..f46fbd3 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2942,6 +2942,10 @@
 
 	if (xfer_mode == t->mode)
 		return t;
+
+	WARN_ONCE(true, "%s: unable to find timing for xfer_mode 0x%x\n",
+			__func__, xfer_mode);
+
 	return NULL;
 }
 
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index e3bda074..a6df6a3 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -1052,6 +1052,8 @@
 {
 	sdev->use_10_for_rw = 1;
 	sdev->use_10_for_ms = 1;
+	sdev->no_report_opcodes = 1;
+	sdev->no_write_same = 1;
 
 	/* Schedule policy is determined by ->qc_defer() callback and
 	 * it needs to see every deferred qc.  Set dev_blocked to 1 to
diff --git a/drivers/ata/pata_arasan_cf.c b/drivers/ata/pata_arasan_cf.c
index 26201eb..371fd2c 100644
--- a/drivers/ata/pata_arasan_cf.c
+++ b/drivers/ata/pata_arasan_cf.c
@@ -317,6 +317,12 @@
 		return ret;
 	}
 
+	ret = clk_set_rate(acdev->clk, 166000000);
+	if (ret) {
+		dev_warn(acdev->host->dev, "clock set rate failed");
+		return ret;
+	}
+
 	spin_lock_irqsave(&acdev->host->lock, flags);
 	/* configure CF interface clock */
 	writel((pdata->cf_if_clk <= CF_IF_CLK_200M) ? pdata->cf_if_clk :
@@ -908,7 +914,7 @@
 	return 0;
 }
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 static int arasan_cf_suspend(struct device *dev)
 {
 	struct ata_host *host = dev_get_drvdata(dev);
diff --git a/drivers/ata/sata_highbank.c b/drivers/ata/sata_highbank.c
index 0d7c4c2..400bf1c 100644
--- a/drivers/ata/sata_highbank.c
+++ b/drivers/ata/sata_highbank.c
@@ -260,7 +260,7 @@
 };
 MODULE_DEVICE_TABLE(of, ahci_of_match);
 
-static int __init ahci_highbank_probe(struct platform_device *pdev)
+static int __devinit ahci_highbank_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct ahci_host_priv *hpriv;
@@ -378,7 +378,7 @@
 	return 0;
 }
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 static int ahci_highbank_suspend(struct device *dev)
 {
 	struct ata_host *host = dev_get_drvdata(dev);
diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c
index 44a4256..08608de 100644
--- a/drivers/ata/sata_svw.c
+++ b/drivers/ata/sata_svw.c
@@ -142,6 +142,39 @@
 	return 0;
 }
 
+static int k2_sata_softreset(struct ata_link *link,
+			     unsigned int *class, unsigned long deadline)
+{
+	u8 dmactl;
+	void __iomem *mmio = link->ap->ioaddr.bmdma_addr;
+
+	dmactl = readb(mmio + ATA_DMA_CMD);
+
+	/* Clear the start bit */
+	if (dmactl & ATA_DMA_START) {
+		dmactl &= ~ATA_DMA_START;
+		writeb(dmactl, mmio + ATA_DMA_CMD);
+	}
+
+	return ata_sff_softreset(link, class, deadline);
+}
+
+static int k2_sata_hardreset(struct ata_link *link,
+			     unsigned int *class, unsigned long deadline)
+{
+	u8 dmactl;
+	void __iomem *mmio = link->ap->ioaddr.bmdma_addr;
+
+	dmactl = readb(mmio + ATA_DMA_CMD);
+
+	/* Clear the start bit */
+	if (dmactl & ATA_DMA_START) {
+		dmactl &= ~ATA_DMA_START;
+		writeb(dmactl, mmio + ATA_DMA_CMD);
+	}
+
+	return sata_sff_hardreset(link, class, deadline);
+}
 
 static void k2_sata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
 {
@@ -346,6 +379,8 @@
 
 static struct ata_port_operations k2_sata_ops = {
 	.inherits		= &ata_bmdma_port_ops,
+	.softreset              = k2_sata_softreset,
+	.hardreset              = k2_sata_hardreset,
 	.sff_tf_load		= k2_sata_tf_load,
 	.sff_tf_read		= k2_sata_tf_read,
 	.sff_check_status	= k2_stat_check_status,
diff --git a/drivers/atm/ambassador.c b/drivers/atm/ambassador.c
index 89b30f3..ff7bb8a 100644
--- a/drivers/atm/ambassador.c
+++ b/drivers/atm/ambassador.c
@@ -1961,6 +1961,7 @@
     res = loader_verify(lb, dev, rec);
     if (res)
       break;
+    rec = ihex_next_binrec(rec);
   }
   release_firmware(fw);
   if (!res)
diff --git a/drivers/base/core.c b/drivers/base/core.c
index 442e5d3..4179139 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -1180,7 +1180,6 @@
 	if (dev->bus)
 		blocking_notifier_call_chain(&dev->bus->p->bus_notifier,
 					     BUS_NOTIFY_DEL_DEVICE, dev);
-	device_pm_remove(dev);
 	dpm_sysfs_remove(dev);
 	if (parent)
 		klist_del(&dev->p->knode_parent);
@@ -1205,6 +1204,7 @@
 	device_remove_file(dev, &uevent_attr);
 	device_remove_attrs(dev);
 	bus_remove_device(dev);
+	device_pm_remove(dev);
 	driver_deferred_probe_del(dev);
 
 	/* Notify the platform of the removal, in case they
diff --git a/drivers/base/dma-contiguous.c b/drivers/base/dma-contiguous.c
index 612afcc..0ca5442 100644
--- a/drivers/base/dma-contiguous.c
+++ b/drivers/base/dma-contiguous.c
@@ -57,8 +57,8 @@
  * Users, who want to set the size of global CMA area for their system
  * should use cma= kernel parameter.
  */
-static const unsigned long size_bytes = CMA_SIZE_MBYTES * SZ_1M;
-static long size_cmdline = -1;
+static const phys_addr_t size_bytes = CMA_SIZE_MBYTES * SZ_1M;
+static phys_addr_t size_cmdline = -1;
 
 static int __init early_cma(char *p)
 {
@@ -70,7 +70,7 @@
 
 #ifdef CONFIG_CMA_SIZE_PERCENTAGE
 
-static unsigned long __init __maybe_unused cma_early_percent_memory(void)
+static phys_addr_t __init __maybe_unused cma_early_percent_memory(void)
 {
 	struct memblock_region *reg;
 	unsigned long total_pages = 0;
@@ -88,7 +88,7 @@
 
 #else
 
-static inline __maybe_unused unsigned long cma_early_percent_memory(void)
+static inline __maybe_unused phys_addr_t cma_early_percent_memory(void)
 {
 	return 0;
 }
@@ -106,7 +106,7 @@
  */
 void __init dma_contiguous_reserve(phys_addr_t limit)
 {
-	unsigned long selected_size = 0;
+	phys_addr_t selected_size = 0;
 
 	pr_debug("%s(limit %08lx)\n", __func__, (unsigned long)limit);
 
@@ -126,7 +126,7 @@
 
 	if (selected_size) {
 		pr_debug("%s: reserving %ld MiB for global area\n", __func__,
-			 selected_size / SZ_1M);
+			 (unsigned long)selected_size / SZ_1M);
 
 		dma_declare_contiguous(NULL, selected_size, 0, limit);
 	}
@@ -227,11 +227,11 @@
  * called by board specific code when early allocator (memblock or bootmem)
  * is still activate.
  */
-int __init dma_declare_contiguous(struct device *dev, unsigned long size,
+int __init dma_declare_contiguous(struct device *dev, phys_addr_t size,
 				  phys_addr_t base, phys_addr_t limit)
 {
 	struct cma_reserved *r = &cma_reserved[cma_reserved_count];
-	unsigned long alignment;
+	phys_addr_t alignment;
 
 	pr_debug("%s(size %lx, base %08lx, limit %08lx)\n", __func__,
 		 (unsigned long)size, (unsigned long)base,
@@ -268,10 +268,6 @@
 		if (!addr) {
 			base = -ENOMEM;
 			goto err;
-		} else if (addr + size > ~(unsigned long)0) {
-			memblock_free(addr, size);
-			base = -EINVAL;
-			goto err;
 		} else {
 			base = addr;
 		}
@@ -285,14 +281,14 @@
 	r->size = size;
 	r->dev = dev;
 	cma_reserved_count++;
-	pr_info("CMA: reserved %ld MiB at %08lx\n", size / SZ_1M,
+	pr_info("CMA: reserved %ld MiB at %08lx\n", (unsigned long)size / SZ_1M,
 		(unsigned long)base);
 
 	/* Architecture specific contiguous memory fixup. */
 	dma_contiguous_early_fixup(base, size);
 	return 0;
 err:
-	pr_err("CMA: failed to reserve %ld MiB\n", size / SZ_1M);
+	pr_err("CMA: failed to reserve %ld MiB\n", (unsigned long)size / SZ_1M);
 	return base;
 }
 
diff --git a/drivers/base/platform.c b/drivers/base/platform.c
index d5e3b45..c0b8df3 100644
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -21,6 +21,7 @@
 #include <linux/slab.h>
 #include <linux/pm_runtime.h>
 #include <linux/idr.h>
+#include <linux/acpi.h>
 
 #include "base.h"
 #include "power/power.h"
@@ -436,6 +437,7 @@
 		goto err_alloc;
 
 	pdev->dev.parent = pdevinfo->parent;
+	ACPI_HANDLE_SET(&pdev->dev, pdevinfo->acpi_node.handle);
 
 	if (pdevinfo->dma_mask) {
 		/*
@@ -466,6 +468,7 @@
 	ret = platform_device_add(pdev);
 	if (ret) {
 err:
+		ACPI_HANDLE_SET(&pdev->dev, NULL);
 		kfree(pdev->dev.dma_mask);
 
 err_alloc:
@@ -481,8 +484,16 @@
 {
 	struct platform_driver *drv = to_platform_driver(_dev->driver);
 	struct platform_device *dev = to_platform_device(_dev);
+	int ret;
 
-	return drv->probe(dev);
+	if (ACPI_HANDLE(_dev))
+		acpi_dev_pm_attach(_dev, true);
+
+	ret = drv->probe(dev);
+	if (ret && ACPI_HANDLE(_dev))
+		acpi_dev_pm_detach(_dev, true);
+
+	return ret;
 }
 
 static int platform_drv_probe_fail(struct device *_dev)
@@ -494,8 +505,13 @@
 {
 	struct platform_driver *drv = to_platform_driver(_dev->driver);
 	struct platform_device *dev = to_platform_device(_dev);
+	int ret;
 
-	return drv->remove(dev);
+	ret = drv->remove(dev);
+	if (ACPI_HANDLE(_dev))
+		acpi_dev_pm_detach(_dev, true);
+
+	return ret;
 }
 
 static void platform_drv_shutdown(struct device *_dev)
@@ -504,6 +520,8 @@
 	struct platform_device *dev = to_platform_device(_dev);
 
 	drv->shutdown(dev);
+	if (ACPI_HANDLE(_dev))
+		acpi_dev_pm_detach(_dev, true);
 }
 
 /**
@@ -709,6 +727,10 @@
 	if (of_driver_match_device(dev, drv))
 		return 1;
 
+	/* Then try ACPI style match */
+	if (acpi_driver_match_device(dev, drv))
+		return 1;
+
 	/* Then try to match against the id table */
 	if (pdrv->id_table)
 		return platform_match_id(pdrv->id_table, pdev) != NULL;
diff --git a/drivers/base/power/clock_ops.c b/drivers/base/power/clock_ops.c
index eb78e96..9d8fde7 100644
--- a/drivers/base/power/clock_ops.c
+++ b/drivers/base/power/clock_ops.c
@@ -99,7 +99,7 @@
 
 	if (ce->status < PCE_STATUS_ERROR) {
 		if (ce->status == PCE_STATUS_ENABLED)
-			clk_disable(ce->clk);
+			clk_disable_unprepare(ce->clk);
 
 		if (ce->status >= PCE_STATUS_ACQUIRED)
 			clk_put(ce->clk);
@@ -396,7 +396,7 @@
 
 	clk = clk_get(dev, con_id);
 	if (!IS_ERR(clk)) {
-		clk_enable(clk);
+		clk_prepare_enable(clk);
 		clk_put(clk);
 		dev_info(dev, "Runtime PM disabled, clock forced on.\n");
 	}
@@ -413,7 +413,7 @@
 
 	clk = clk_get(dev, con_id);
 	if (!IS_ERR(clk)) {
-		clk_disable(clk);
+		clk_disable_unprepare(clk);
 		clk_put(clk);
 		dev_info(dev, "Runtime PM disabled, clock forced off.\n");
 	}
diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c
index 96b71b6..acc3a8d 100644
--- a/drivers/base/power/domain.c
+++ b/drivers/base/power/domain.c
@@ -470,10 +470,19 @@
 		return -EBUSY;
 
 	not_suspended = 0;
-	list_for_each_entry(pdd, &genpd->dev_list, list_node)
+	list_for_each_entry(pdd, &genpd->dev_list, list_node) {
+		enum pm_qos_flags_status stat;
+
+		stat = dev_pm_qos_flags(pdd->dev,
+					PM_QOS_FLAG_NO_POWER_OFF
+						| PM_QOS_FLAG_REMOTE_WAKEUP);
+		if (stat > PM_QOS_FLAGS_NONE)
+			return -EBUSY;
+
 		if (pdd->dev->driver && (!pm_runtime_suspended(pdd->dev)
 		    || pdd->dev->power.irq_safe))
 			not_suspended++;
+	}
 
 	if (not_suspended > genpd->in_progress)
 		return -EBUSY;
diff --git a/drivers/base/power/opp.c b/drivers/base/power/opp.c
index d946864..50b2831 100644
--- a/drivers/base/power/opp.c
+++ b/drivers/base/power/opp.c
@@ -23,6 +23,7 @@
 #include <linux/rcupdate.h>
 #include <linux/opp.h>
 #include <linux/of.h>
+#include <linux/export.h>
 
 /*
  * Internal data structure organization with the OPP layer library is as
@@ -65,6 +66,7 @@
 	unsigned long u_volt;
 
 	struct device_opp *dev_opp;
+	struct rcu_head head;
 };
 
 /**
@@ -160,6 +162,7 @@
 
 	return v;
 }
+EXPORT_SYMBOL(opp_get_voltage);
 
 /**
  * opp_get_freq() - Gets the frequency corresponding to an available opp
@@ -189,6 +192,7 @@
 
 	return f;
 }
+EXPORT_SYMBOL(opp_get_freq);
 
 /**
  * opp_get_opp_count() - Get number of opps available in the opp list
@@ -221,6 +225,7 @@
 
 	return count;
 }
+EXPORT_SYMBOL(opp_get_opp_count);
 
 /**
  * opp_find_freq_exact() - search for an exact frequency
@@ -230,7 +235,10 @@
  *
  * Searches for exact match in the opp list and returns pointer to the matching
  * opp if found, else returns ERR_PTR in case of error and should be handled
- * using IS_ERR.
+ * using IS_ERR. Error return values can be:
+ * EINVAL:	for bad pointer
+ * ERANGE:	no match found for search
+ * ENODEV:	if device not found in list of registered devices
  *
  * Note: available is a modifier for the search. if available=true, then the
  * match is for exact matching frequency and is available in the stored OPP
@@ -249,7 +257,7 @@
 				bool available)
 {
 	struct device_opp *dev_opp;
-	struct opp *temp_opp, *opp = ERR_PTR(-ENODEV);
+	struct opp *temp_opp, *opp = ERR_PTR(-ERANGE);
 
 	dev_opp = find_device_opp(dev);
 	if (IS_ERR(dev_opp)) {
@@ -268,6 +276,7 @@
 
 	return opp;
 }
+EXPORT_SYMBOL(opp_find_freq_exact);
 
 /**
  * opp_find_freq_ceil() - Search for an rounded ceil freq
@@ -278,7 +287,11 @@
  * for a device.
  *
  * Returns matching *opp and refreshes *freq accordingly, else returns
- * ERR_PTR in case of error and should be handled using IS_ERR.
+ * ERR_PTR in case of error and should be handled using IS_ERR. Error return
+ * values can be:
+ * EINVAL:	for bad pointer
+ * ERANGE:	no match found for search
+ * ENODEV:	if device not found in list of registered devices
  *
  * Locking: This function must be called under rcu_read_lock(). opp is a rcu
  * protected pointer. The reason for the same is that the opp pointer which is
@@ -289,7 +302,7 @@
 struct opp *opp_find_freq_ceil(struct device *dev, unsigned long *freq)
 {
 	struct device_opp *dev_opp;
-	struct opp *temp_opp, *opp = ERR_PTR(-ENODEV);
+	struct opp *temp_opp, *opp = ERR_PTR(-ERANGE);
 
 	if (!dev || !freq) {
 		dev_err(dev, "%s: Invalid argument freq=%p\n", __func__, freq);
@@ -298,7 +311,7 @@
 
 	dev_opp = find_device_opp(dev);
 	if (IS_ERR(dev_opp))
-		return opp;
+		return ERR_CAST(dev_opp);
 
 	list_for_each_entry_rcu(temp_opp, &dev_opp->opp_list, node) {
 		if (temp_opp->available && temp_opp->rate >= *freq) {
@@ -310,6 +323,7 @@
 
 	return opp;
 }
+EXPORT_SYMBOL(opp_find_freq_ceil);
 
 /**
  * opp_find_freq_floor() - Search for a rounded floor freq
@@ -320,7 +334,11 @@
  * for a device.
  *
  * Returns matching *opp and refreshes *freq accordingly, else returns
- * ERR_PTR in case of error and should be handled using IS_ERR.
+ * ERR_PTR in case of error and should be handled using IS_ERR. Error return
+ * values can be:
+ * EINVAL:	for bad pointer
+ * ERANGE:	no match found for search
+ * ENODEV:	if device not found in list of registered devices
  *
  * Locking: This function must be called under rcu_read_lock(). opp is a rcu
  * protected pointer. The reason for the same is that the opp pointer which is
@@ -331,7 +349,7 @@
 struct opp *opp_find_freq_floor(struct device *dev, unsigned long *freq)
 {
 	struct device_opp *dev_opp;
-	struct opp *temp_opp, *opp = ERR_PTR(-ENODEV);
+	struct opp *temp_opp, *opp = ERR_PTR(-ERANGE);
 
 	if (!dev || !freq) {
 		dev_err(dev, "%s: Invalid argument freq=%p\n", __func__, freq);
@@ -340,7 +358,7 @@
 
 	dev_opp = find_device_opp(dev);
 	if (IS_ERR(dev_opp))
-		return opp;
+		return ERR_CAST(dev_opp);
 
 	list_for_each_entry_rcu(temp_opp, &dev_opp->opp_list, node) {
 		if (temp_opp->available) {
@@ -356,6 +374,7 @@
 
 	return opp;
 }
+EXPORT_SYMBOL(opp_find_freq_floor);
 
 /**
  * opp_add()  - Add an OPP table from a table definitions
@@ -512,7 +531,7 @@
 
 	list_replace_rcu(&opp->node, &new_opp->node);
 	mutex_unlock(&dev_opp_list_lock);
-	synchronize_rcu();
+	kfree_rcu(opp, head);
 
 	/* Notify the change of the OPP availability */
 	if (availability_req)
@@ -522,13 +541,10 @@
 		srcu_notifier_call_chain(&dev_opp->head, OPP_EVENT_DISABLE,
 					 new_opp);
 
-	/* clean up old opp */
-	new_opp = opp;
-	goto out;
+	return 0;
 
 unlock:
 	mutex_unlock(&dev_opp_list_lock);
-out:
 	kfree(new_opp);
 	return r;
 }
@@ -552,6 +568,7 @@
 {
 	return opp_set_availability(dev, freq, true);
 }
+EXPORT_SYMBOL(opp_enable);
 
 /**
  * opp_disable() - Disable a specific OPP
@@ -573,6 +590,7 @@
 {
 	return opp_set_availability(dev, freq, false);
 }
+EXPORT_SYMBOL(opp_disable);
 
 #ifdef CONFIG_CPU_FREQ
 /**
diff --git a/drivers/base/power/power.h b/drivers/base/power/power.h
index 0dbfdf4..b16686a 100644
--- a/drivers/base/power/power.h
+++ b/drivers/base/power/power.h
@@ -93,8 +93,10 @@
 extern void rpm_sysfs_remove(struct device *dev);
 extern int wakeup_sysfs_add(struct device *dev);
 extern void wakeup_sysfs_remove(struct device *dev);
-extern int pm_qos_sysfs_add(struct device *dev);
-extern void pm_qos_sysfs_remove(struct device *dev);
+extern int pm_qos_sysfs_add_latency(struct device *dev);
+extern void pm_qos_sysfs_remove_latency(struct device *dev);
+extern int pm_qos_sysfs_add_flags(struct device *dev);
+extern void pm_qos_sysfs_remove_flags(struct device *dev);
 
 #else /* CONFIG_PM */
 
diff --git a/drivers/base/power/qos.c b/drivers/base/power/qos.c
index 74a67e0..ff46387 100644
--- a/drivers/base/power/qos.c
+++ b/drivers/base/power/qos.c
@@ -40,6 +40,7 @@
 #include <linux/device.h>
 #include <linux/mutex.h>
 #include <linux/export.h>
+#include <linux/pm_runtime.h>
 
 #include "power.h"
 
@@ -48,6 +49,50 @@
 static BLOCKING_NOTIFIER_HEAD(dev_pm_notifiers);
 
 /**
+ * __dev_pm_qos_flags - Check PM QoS flags for a given device.
+ * @dev: Device to check the PM QoS flags for.
+ * @mask: Flags to check against.
+ *
+ * This routine must be called with dev->power.lock held.
+ */
+enum pm_qos_flags_status __dev_pm_qos_flags(struct device *dev, s32 mask)
+{
+	struct dev_pm_qos *qos = dev->power.qos;
+	struct pm_qos_flags *pqf;
+	s32 val;
+
+	if (!qos)
+		return PM_QOS_FLAGS_UNDEFINED;
+
+	pqf = &qos->flags;
+	if (list_empty(&pqf->list))
+		return PM_QOS_FLAGS_UNDEFINED;
+
+	val = pqf->effective_flags & mask;
+	if (val)
+		return (val == mask) ? PM_QOS_FLAGS_ALL : PM_QOS_FLAGS_SOME;
+
+	return PM_QOS_FLAGS_NONE;
+}
+
+/**
+ * dev_pm_qos_flags - Check PM QoS flags for a given device (locked).
+ * @dev: Device to check the PM QoS flags for.
+ * @mask: Flags to check against.
+ */
+enum pm_qos_flags_status dev_pm_qos_flags(struct device *dev, s32 mask)
+{
+	unsigned long irqflags;
+	enum pm_qos_flags_status ret;
+
+	spin_lock_irqsave(&dev->power.lock, irqflags);
+	ret = __dev_pm_qos_flags(dev, mask);
+	spin_unlock_irqrestore(&dev->power.lock, irqflags);
+
+	return ret;
+}
+
+/**
  * __dev_pm_qos_read_value - Get PM QoS constraint for a given device.
  * @dev: Device to get the PM QoS constraint value for.
  *
@@ -55,9 +100,7 @@
  */
 s32 __dev_pm_qos_read_value(struct device *dev)
 {
-	struct pm_qos_constraints *c = dev->power.constraints;
-
-	return c ? pm_qos_read_value(c) : 0;
+	return dev->power.qos ? pm_qos_read_value(&dev->power.qos->latency) : 0;
 }
 
 /**
@@ -76,30 +119,39 @@
 	return ret;
 }
 
-/*
- * apply_constraint
- * @req: constraint request to apply
- * @action: action to perform add/update/remove, of type enum pm_qos_req_action
- * @value: defines the qos request
+/**
+ * apply_constraint - Add/modify/remove device PM QoS request.
+ * @req: Constraint request to apply
+ * @action: Action to perform (add/update/remove).
+ * @value: Value to assign to the QoS request.
  *
  * Internal function to update the constraints list using the PM QoS core
  * code and if needed call the per-device and the global notification
  * callbacks
  */
 static int apply_constraint(struct dev_pm_qos_request *req,
-			    enum pm_qos_req_action action, int value)
+			    enum pm_qos_req_action action, s32 value)
 {
-	int ret, curr_value;
+	struct dev_pm_qos *qos = req->dev->power.qos;
+	int ret;
 
-	ret = pm_qos_update_target(req->dev->power.constraints,
-				   &req->node, action, value);
-
-	if (ret) {
-		/* Call the global callbacks if needed */
-		curr_value = pm_qos_read_value(req->dev->power.constraints);
-		blocking_notifier_call_chain(&dev_pm_notifiers,
-					     (unsigned long)curr_value,
-					     req);
+	switch(req->type) {
+	case DEV_PM_QOS_LATENCY:
+		ret = pm_qos_update_target(&qos->latency, &req->data.pnode,
+					   action, value);
+		if (ret) {
+			value = pm_qos_read_value(&qos->latency);
+			blocking_notifier_call_chain(&dev_pm_notifiers,
+						     (unsigned long)value,
+						     req);
+		}
+		break;
+	case DEV_PM_QOS_FLAGS:
+		ret = pm_qos_update_flags(&qos->flags, &req->data.flr,
+					  action, value);
+		break;
+	default:
+		ret = -EINVAL;
 	}
 
 	return ret;
@@ -114,28 +166,32 @@
  */
 static int dev_pm_qos_constraints_allocate(struct device *dev)
 {
+	struct dev_pm_qos *qos;
 	struct pm_qos_constraints *c;
 	struct blocking_notifier_head *n;
 
-	c = kzalloc(sizeof(*c), GFP_KERNEL);
-	if (!c)
+	qos = kzalloc(sizeof(*qos), GFP_KERNEL);
+	if (!qos)
 		return -ENOMEM;
 
 	n = kzalloc(sizeof(*n), GFP_KERNEL);
 	if (!n) {
-		kfree(c);
+		kfree(qos);
 		return -ENOMEM;
 	}
 	BLOCKING_INIT_NOTIFIER_HEAD(n);
 
+	c = &qos->latency;
 	plist_head_init(&c->list);
 	c->target_value = PM_QOS_DEV_LAT_DEFAULT_VALUE;
 	c->default_value = PM_QOS_DEV_LAT_DEFAULT_VALUE;
 	c->type = PM_QOS_MIN;
 	c->notifiers = n;
 
+	INIT_LIST_HEAD(&qos->flags.list);
+
 	spin_lock_irq(&dev->power.lock);
-	dev->power.constraints = c;
+	dev->power.qos = qos;
 	spin_unlock_irq(&dev->power.lock);
 
 	return 0;
@@ -151,7 +207,7 @@
 void dev_pm_qos_constraints_init(struct device *dev)
 {
 	mutex_lock(&dev_pm_qos_mtx);
-	dev->power.constraints = NULL;
+	dev->power.qos = NULL;
 	dev->power.power_state = PMSG_ON;
 	mutex_unlock(&dev_pm_qos_mtx);
 }
@@ -164,24 +220,28 @@
  */
 void dev_pm_qos_constraints_destroy(struct device *dev)
 {
+	struct dev_pm_qos *qos;
 	struct dev_pm_qos_request *req, *tmp;
 	struct pm_qos_constraints *c;
+	struct pm_qos_flags *f;
 
 	/*
-	 * If the device's PM QoS resume latency limit has been exposed to user
-	 * space, it has to be hidden at this point.
+	 * If the device's PM QoS resume latency limit or PM QoS flags have been
+	 * exposed to user space, they have to be hidden at this point.
 	 */
 	dev_pm_qos_hide_latency_limit(dev);
+	dev_pm_qos_hide_flags(dev);
 
 	mutex_lock(&dev_pm_qos_mtx);
 
 	dev->power.power_state = PMSG_INVALID;
-	c = dev->power.constraints;
-	if (!c)
+	qos = dev->power.qos;
+	if (!qos)
 		goto out;
 
-	/* Flush the constraints list for the device */
-	plist_for_each_entry_safe(req, tmp, &c->list, node) {
+	/* Flush the constraints lists for the device. */
+	c = &qos->latency;
+	plist_for_each_entry_safe(req, tmp, &c->list, data.pnode) {
 		/*
 		 * Update constraints list and call the notification
 		 * callbacks if needed
@@ -189,13 +249,18 @@
 		apply_constraint(req, PM_QOS_REMOVE_REQ, PM_QOS_DEFAULT_VALUE);
 		memset(req, 0, sizeof(*req));
 	}
+	f = &qos->flags;
+	list_for_each_entry_safe(req, tmp, &f->list, data.flr.node) {
+		apply_constraint(req, PM_QOS_REMOVE_REQ, PM_QOS_DEFAULT_VALUE);
+		memset(req, 0, sizeof(*req));
+	}
 
 	spin_lock_irq(&dev->power.lock);
-	dev->power.constraints = NULL;
+	dev->power.qos = NULL;
 	spin_unlock_irq(&dev->power.lock);
 
 	kfree(c->notifiers);
-	kfree(c);
+	kfree(qos);
 
  out:
 	mutex_unlock(&dev_pm_qos_mtx);
@@ -205,6 +270,7 @@
  * dev_pm_qos_add_request - inserts new qos request into the list
  * @dev: target device for the constraint
  * @req: pointer to a preallocated handle
+ * @type: type of the request
  * @value: defines the qos request
  *
  * This function inserts a new entry in the device constraints list of
@@ -218,9 +284,12 @@
  * -EINVAL in case of wrong parameters, -ENOMEM if there's not enough memory
  * to allocate for data structures, -ENODEV if the device has just been removed
  * from the system.
+ *
+ * Callers should ensure that the target device is not RPM_SUSPENDED before
+ * using this function for requests of type DEV_PM_QOS_FLAGS.
  */
 int dev_pm_qos_add_request(struct device *dev, struct dev_pm_qos_request *req,
-			   s32 value)
+			   enum dev_pm_qos_req_type type, s32 value)
 {
 	int ret = 0;
 
@@ -235,7 +304,7 @@
 
 	mutex_lock(&dev_pm_qos_mtx);
 
-	if (!dev->power.constraints) {
+	if (!dev->power.qos) {
 		if (dev->power.power_state.event == PM_EVENT_INVALID) {
 			/* The device has been removed from the system. */
 			req->dev = NULL;
@@ -251,8 +320,10 @@
 		}
 	}
 
-	if (!ret)
+	if (!ret) {
+		req->type = type;
 		ret = apply_constraint(req, PM_QOS_ADD_REQ, value);
+	}
 
  out:
 	mutex_unlock(&dev_pm_qos_mtx);
@@ -262,6 +333,37 @@
 EXPORT_SYMBOL_GPL(dev_pm_qos_add_request);
 
 /**
+ * __dev_pm_qos_update_request - Modify an existing device PM QoS request.
+ * @req : PM QoS request to modify.
+ * @new_value: New value to request.
+ */
+static int __dev_pm_qos_update_request(struct dev_pm_qos_request *req,
+				       s32 new_value)
+{
+	s32 curr_value;
+	int ret = 0;
+
+	if (!req->dev->power.qos)
+		return -ENODEV;
+
+	switch(req->type) {
+	case DEV_PM_QOS_LATENCY:
+		curr_value = req->data.pnode.prio;
+		break;
+	case DEV_PM_QOS_FLAGS:
+		curr_value = req->data.flr.flags;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (curr_value != new_value)
+		ret = apply_constraint(req, PM_QOS_UPDATE_REQ, new_value);
+
+	return ret;
+}
+
+/**
  * dev_pm_qos_update_request - modifies an existing qos request
  * @req : handle to list element holding a dev_pm_qos request to use
  * @new_value: defines the qos request
@@ -275,11 +377,13 @@
  * 0 if the aggregated constraint value has not changed,
  * -EINVAL in case of wrong parameters, -ENODEV if the device has been
  * removed from the system
+ *
+ * Callers should ensure that the target device is not RPM_SUSPENDED before
+ * using this function for requests of type DEV_PM_QOS_FLAGS.
  */
-int dev_pm_qos_update_request(struct dev_pm_qos_request *req,
-			      s32 new_value)
+int dev_pm_qos_update_request(struct dev_pm_qos_request *req, s32 new_value)
 {
-	int ret = 0;
+	int ret;
 
 	if (!req) /*guard against callers passing in null */
 		return -EINVAL;
@@ -289,17 +393,9 @@
 		return -EINVAL;
 
 	mutex_lock(&dev_pm_qos_mtx);
-
-	if (req->dev->power.constraints) {
-		if (new_value != req->node.prio)
-			ret = apply_constraint(req, PM_QOS_UPDATE_REQ,
-					       new_value);
-	} else {
-		/* Return if the device has been removed */
-		ret = -ENODEV;
-	}
-
+	ret = __dev_pm_qos_update_request(req, new_value);
 	mutex_unlock(&dev_pm_qos_mtx);
+
 	return ret;
 }
 EXPORT_SYMBOL_GPL(dev_pm_qos_update_request);
@@ -315,6 +411,9 @@
  * 0 if the aggregated constraint value has not changed,
  * -EINVAL in case of wrong parameters, -ENODEV if the device has been
  * removed from the system
+ *
+ * Callers should ensure that the target device is not RPM_SUSPENDED before
+ * using this function for requests of type DEV_PM_QOS_FLAGS.
  */
 int dev_pm_qos_remove_request(struct dev_pm_qos_request *req)
 {
@@ -329,7 +428,7 @@
 
 	mutex_lock(&dev_pm_qos_mtx);
 
-	if (req->dev->power.constraints) {
+	if (req->dev->power.qos) {
 		ret = apply_constraint(req, PM_QOS_REMOVE_REQ,
 				       PM_QOS_DEFAULT_VALUE);
 		memset(req, 0, sizeof(*req));
@@ -362,13 +461,13 @@
 
 	mutex_lock(&dev_pm_qos_mtx);
 
-	if (!dev->power.constraints)
+	if (!dev->power.qos)
 		ret = dev->power.power_state.event != PM_EVENT_INVALID ?
 			dev_pm_qos_constraints_allocate(dev) : -ENODEV;
 
 	if (!ret)
 		ret = blocking_notifier_chain_register(
-				dev->power.constraints->notifiers, notifier);
+				dev->power.qos->latency.notifiers, notifier);
 
 	mutex_unlock(&dev_pm_qos_mtx);
 	return ret;
@@ -393,9 +492,9 @@
 	mutex_lock(&dev_pm_qos_mtx);
 
 	/* Silently return if the constraints object is not present. */
-	if (dev->power.constraints)
+	if (dev->power.qos)
 		retval = blocking_notifier_chain_unregister(
-				dev->power.constraints->notifiers,
+				dev->power.qos->latency.notifiers,
 				notifier);
 
 	mutex_unlock(&dev_pm_qos_mtx);
@@ -449,9 +548,10 @@
 		ancestor = ancestor->parent;
 
 	if (ancestor)
-		error = dev_pm_qos_add_request(ancestor, req, value);
+		error = dev_pm_qos_add_request(ancestor, req,
+					       DEV_PM_QOS_LATENCY, value);
 
-	if (error)
+	if (error < 0)
 		req->dev = NULL;
 
 	return error;
@@ -459,10 +559,19 @@
 EXPORT_SYMBOL_GPL(dev_pm_qos_add_ancestor_request);
 
 #ifdef CONFIG_PM_RUNTIME
-static void __dev_pm_qos_drop_user_request(struct device *dev)
+static void __dev_pm_qos_drop_user_request(struct device *dev,
+					   enum dev_pm_qos_req_type type)
 {
-	dev_pm_qos_remove_request(dev->power.pq_req);
-	dev->power.pq_req = NULL;
+	switch(type) {
+	case DEV_PM_QOS_LATENCY:
+		dev_pm_qos_remove_request(dev->power.qos->latency_req);
+		dev->power.qos->latency_req = NULL;
+		break;
+	case DEV_PM_QOS_FLAGS:
+		dev_pm_qos_remove_request(dev->power.qos->flags_req);
+		dev->power.qos->flags_req = NULL;
+		break;
+	}
 }
 
 /**
@@ -478,21 +587,21 @@
 	if (!device_is_registered(dev) || value < 0)
 		return -EINVAL;
 
-	if (dev->power.pq_req)
+	if (dev->power.qos && dev->power.qos->latency_req)
 		return -EEXIST;
 
 	req = kzalloc(sizeof(*req), GFP_KERNEL);
 	if (!req)
 		return -ENOMEM;
 
-	ret = dev_pm_qos_add_request(dev, req, value);
+	ret = dev_pm_qos_add_request(dev, req, DEV_PM_QOS_LATENCY, value);
 	if (ret < 0)
 		return ret;
 
-	dev->power.pq_req = req;
-	ret = pm_qos_sysfs_add(dev);
+	dev->power.qos->latency_req = req;
+	ret = pm_qos_sysfs_add_latency(dev);
 	if (ret)
-		__dev_pm_qos_drop_user_request(dev);
+		__dev_pm_qos_drop_user_request(dev, DEV_PM_QOS_LATENCY);
 
 	return ret;
 }
@@ -504,10 +613,92 @@
  */
 void dev_pm_qos_hide_latency_limit(struct device *dev)
 {
-	if (dev->power.pq_req) {
-		pm_qos_sysfs_remove(dev);
-		__dev_pm_qos_drop_user_request(dev);
+	if (dev->power.qos && dev->power.qos->latency_req) {
+		pm_qos_sysfs_remove_latency(dev);
+		__dev_pm_qos_drop_user_request(dev, DEV_PM_QOS_LATENCY);
 	}
 }
 EXPORT_SYMBOL_GPL(dev_pm_qos_hide_latency_limit);
+
+/**
+ * dev_pm_qos_expose_flags - Expose PM QoS flags of a device to user space.
+ * @dev: Device whose PM QoS flags are to be exposed to user space.
+ * @val: Initial values of the flags.
+ */
+int dev_pm_qos_expose_flags(struct device *dev, s32 val)
+{
+	struct dev_pm_qos_request *req;
+	int ret;
+
+	if (!device_is_registered(dev))
+		return -EINVAL;
+
+	if (dev->power.qos && dev->power.qos->flags_req)
+		return -EEXIST;
+
+	req = kzalloc(sizeof(*req), GFP_KERNEL);
+	if (!req)
+		return -ENOMEM;
+
+	pm_runtime_get_sync(dev);
+	ret = dev_pm_qos_add_request(dev, req, DEV_PM_QOS_FLAGS, val);
+	if (ret < 0)
+		goto fail;
+
+	dev->power.qos->flags_req = req;
+	ret = pm_qos_sysfs_add_flags(dev);
+	if (ret)
+		__dev_pm_qos_drop_user_request(dev, DEV_PM_QOS_FLAGS);
+
+fail:
+	pm_runtime_put(dev);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(dev_pm_qos_expose_flags);
+
+/**
+ * dev_pm_qos_hide_flags - Hide PM QoS flags of a device from user space.
+ * @dev: Device whose PM QoS flags are to be hidden from user space.
+ */
+void dev_pm_qos_hide_flags(struct device *dev)
+{
+	if (dev->power.qos && dev->power.qos->flags_req) {
+		pm_qos_sysfs_remove_flags(dev);
+		pm_runtime_get_sync(dev);
+		__dev_pm_qos_drop_user_request(dev, DEV_PM_QOS_FLAGS);
+		pm_runtime_put(dev);
+	}
+}
+EXPORT_SYMBOL_GPL(dev_pm_qos_hide_flags);
+
+/**
+ * dev_pm_qos_update_flags - Update PM QoS flags request owned by user space.
+ * @dev: Device to update the PM QoS flags request for.
+ * @mask: Flags to set/clear.
+ * @set: Whether to set or clear the flags (true means set).
+ */
+int dev_pm_qos_update_flags(struct device *dev, s32 mask, bool set)
+{
+	s32 value;
+	int ret;
+
+	if (!dev->power.qos || !dev->power.qos->flags_req)
+		return -EINVAL;
+
+	pm_runtime_get_sync(dev);
+	mutex_lock(&dev_pm_qos_mtx);
+
+	value = dev_pm_qos_requested_flags(dev);
+	if (set)
+		value |= mask;
+	else
+		value &= ~mask;
+
+	ret = __dev_pm_qos_update_request(dev->power.qos->flags_req, value);
+
+	mutex_unlock(&dev_pm_qos_mtx);
+	pm_runtime_put(dev);
+
+	return ret;
+}
 #endif /* CONFIG_PM_RUNTIME */
diff --git a/drivers/base/power/sysfs.c b/drivers/base/power/sysfs.c
index b91dc6f..50d16e3 100644
--- a/drivers/base/power/sysfs.c
+++ b/drivers/base/power/sysfs.c
@@ -221,7 +221,7 @@
 static ssize_t pm_qos_latency_show(struct device *dev,
 				   struct device_attribute *attr, char *buf)
 {
-	return sprintf(buf, "%d\n", dev->power.pq_req->node.prio);
+	return sprintf(buf, "%d\n", dev_pm_qos_requested_latency(dev));
 }
 
 static ssize_t pm_qos_latency_store(struct device *dev,
@@ -237,12 +237,66 @@
 	if (value < 0)
 		return -EINVAL;
 
-	ret = dev_pm_qos_update_request(dev->power.pq_req, value);
+	ret = dev_pm_qos_update_request(dev->power.qos->latency_req, value);
 	return ret < 0 ? ret : n;
 }
 
 static DEVICE_ATTR(pm_qos_resume_latency_us, 0644,
 		   pm_qos_latency_show, pm_qos_latency_store);
+
+static ssize_t pm_qos_no_power_off_show(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	return sprintf(buf, "%d\n", !!(dev_pm_qos_requested_flags(dev)
+					& PM_QOS_FLAG_NO_POWER_OFF));
+}
+
+static ssize_t pm_qos_no_power_off_store(struct device *dev,
+					 struct device_attribute *attr,
+					 const char *buf, size_t n)
+{
+	int ret;
+
+	if (kstrtoint(buf, 0, &ret))
+		return -EINVAL;
+
+	if (ret != 0 && ret != 1)
+		return -EINVAL;
+
+	ret = dev_pm_qos_update_flags(dev, PM_QOS_FLAG_NO_POWER_OFF, ret);
+	return ret < 0 ? ret : n;
+}
+
+static DEVICE_ATTR(pm_qos_no_power_off, 0644,
+		   pm_qos_no_power_off_show, pm_qos_no_power_off_store);
+
+static ssize_t pm_qos_remote_wakeup_show(struct device *dev,
+					 struct device_attribute *attr,
+					 char *buf)
+{
+	return sprintf(buf, "%d\n", !!(dev_pm_qos_requested_flags(dev)
+					& PM_QOS_FLAG_REMOTE_WAKEUP));
+}
+
+static ssize_t pm_qos_remote_wakeup_store(struct device *dev,
+					  struct device_attribute *attr,
+					  const char *buf, size_t n)
+{
+	int ret;
+
+	if (kstrtoint(buf, 0, &ret))
+		return -EINVAL;
+
+	if (ret != 0 && ret != 1)
+		return -EINVAL;
+
+	ret = dev_pm_qos_update_flags(dev, PM_QOS_FLAG_REMOTE_WAKEUP, ret);
+	return ret < 0 ? ret : n;
+}
+
+static DEVICE_ATTR(pm_qos_remote_wakeup, 0644,
+		   pm_qos_remote_wakeup_show, pm_qos_remote_wakeup_store);
 #endif /* CONFIG_PM_RUNTIME */
 
 #ifdef CONFIG_PM_SLEEP
@@ -564,15 +618,27 @@
 	.attrs	= runtime_attrs,
 };
 
-static struct attribute *pm_qos_attrs[] = {
+static struct attribute *pm_qos_latency_attrs[] = {
 #ifdef CONFIG_PM_RUNTIME
 	&dev_attr_pm_qos_resume_latency_us.attr,
 #endif /* CONFIG_PM_RUNTIME */
 	NULL,
 };
-static struct attribute_group pm_qos_attr_group = {
+static struct attribute_group pm_qos_latency_attr_group = {
 	.name	= power_group_name,
-	.attrs	= pm_qos_attrs,
+	.attrs	= pm_qos_latency_attrs,
+};
+
+static struct attribute *pm_qos_flags_attrs[] = {
+#ifdef CONFIG_PM_RUNTIME
+	&dev_attr_pm_qos_no_power_off.attr,
+	&dev_attr_pm_qos_remote_wakeup.attr,
+#endif /* CONFIG_PM_RUNTIME */
+	NULL,
+};
+static struct attribute_group pm_qos_flags_attr_group = {
+	.name	= power_group_name,
+	.attrs	= pm_qos_flags_attrs,
 };
 
 int dpm_sysfs_add(struct device *dev)
@@ -615,14 +681,24 @@
 	sysfs_unmerge_group(&dev->kobj, &pm_wakeup_attr_group);
 }
 
-int pm_qos_sysfs_add(struct device *dev)
+int pm_qos_sysfs_add_latency(struct device *dev)
 {
-	return sysfs_merge_group(&dev->kobj, &pm_qos_attr_group);
+	return sysfs_merge_group(&dev->kobj, &pm_qos_latency_attr_group);
 }
 
-void pm_qos_sysfs_remove(struct device *dev)
+void pm_qos_sysfs_remove_latency(struct device *dev)
 {
-	sysfs_unmerge_group(&dev->kobj, &pm_qos_attr_group);
+	sysfs_unmerge_group(&dev->kobj, &pm_qos_latency_attr_group);
+}
+
+int pm_qos_sysfs_add_flags(struct device *dev)
+{
+	return sysfs_merge_group(&dev->kobj, &pm_qos_flags_attr_group);
+}
+
+void pm_qos_sysfs_remove_flags(struct device *dev)
+{
+	sysfs_unmerge_group(&dev->kobj, &pm_qos_flags_attr_group);
 }
 
 void rpm_sysfs_remove(struct device *dev)
diff --git a/drivers/block/aoe/aoecmd.c b/drivers/block/aoe/aoecmd.c
index 3804a0a..9fe4f18 100644
--- a/drivers/block/aoe/aoecmd.c
+++ b/drivers/block/aoe/aoecmd.c
@@ -935,7 +935,7 @@
 
 	/* cf. http://lkml.org/lkml/2006/10/31/28 */
 	if (!fastfail)
-		q->request_fn(q);
+		__blk_run_queue(q);
 }
 
 static void
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index 1c49d71..2ddd64a 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -4330,6 +4330,7 @@
 out_unreg_blkdev:
 	unregister_blkdev(FLOPPY_MAJOR, "fd");
 out_put_disk:
+	destroy_workqueue(floppy_wq);
 	for (drive = 0; drive < N_DRIVE; drive++) {
 		if (!disks[drive])
 			break;
@@ -4340,7 +4341,6 @@
 		}
 		put_disk(disks[drive]);
 	}
-	destroy_workqueue(floppy_wq);
 	return err;
 }
 
@@ -4555,6 +4555,8 @@
 	unregister_blkdev(FLOPPY_MAJOR, "fd");
 	platform_driver_unregister(&floppy_driver);
 
+	destroy_workqueue(floppy_wq);
+
 	for (drive = 0; drive < N_DRIVE; drive++) {
 		del_timer_sync(&motor_off_timer[drive]);
 
@@ -4578,7 +4580,6 @@
 
 	cancel_delayed_work_sync(&fd_timeout);
 	cancel_delayed_work_sync(&fd_timer);
-	destroy_workqueue(floppy_wq);
 
 	if (atomic_read(&usage_count))
 		floppy_release_irq_and_dma();
diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c
index adc6f36..9694dd9 100644
--- a/drivers/block/mtip32xx/mtip32xx.c
+++ b/drivers/block/mtip32xx/mtip32xx.c
@@ -559,7 +559,7 @@
 	struct mtip_cmd *command;
 	int tag, cmdto_cnt = 0;
 	unsigned int bit, group;
-	unsigned int num_command_slots = port->dd->slot_groups * 32;
+	unsigned int num_command_slots;
 	unsigned long to, tagaccum[SLOTBITS_IN_LONGS];
 
 	if (unlikely(!port))
@@ -572,6 +572,7 @@
 	}
 	/* clear the tag accumulator */
 	memset(tagaccum, 0, SLOTBITS_IN_LONGS * sizeof(long));
+	num_command_slots = port->dd->slot_groups * 32;
 
 	for (tag = 0; tag < num_command_slots; tag++) {
 		/*
@@ -2218,8 +2219,8 @@
 		fis.device);
 
 	/* check for erase mode support during secure erase.*/
-	if ((fis.command == ATA_CMD_SEC_ERASE_UNIT)
-					&& (outbuf[0] & MTIP_SEC_ERASE_MODE)) {
+	if ((fis.command == ATA_CMD_SEC_ERASE_UNIT) && outbuf &&
+					(outbuf[0] & MTIP_SEC_ERASE_MODE)) {
 		erasemode = 1;
 	}
 
@@ -2439,7 +2440,7 @@
  * return value
  *	None
  */
-static void mtip_hw_submit_io(struct driver_data *dd, sector_t start,
+static void mtip_hw_submit_io(struct driver_data *dd, sector_t sector,
 			      int nsect, int nents, int tag, void *callback,
 			      void *data, int dir)
 {
@@ -2447,6 +2448,7 @@
 	struct mtip_port *port = dd->port;
 	struct mtip_cmd *command = &port->commands[tag];
 	int dma_dir = (dir == READ) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
+	u64 start = sector;
 
 	/* Map the scatter list for DMA access */
 	nents = dma_map_sg(&dd->pdev->dev, command->sg, nents, dma_dir);
@@ -2465,8 +2467,12 @@
 	fis->opts        = 1 << 7;
 	fis->command     =
 		(dir == READ ? ATA_CMD_FPDMA_READ : ATA_CMD_FPDMA_WRITE);
-	*((unsigned int *) &fis->lba_low) = (start & 0xFFFFFF);
-	*((unsigned int *) &fis->lba_low_ex) = ((start >> 24) & 0xFFFFFF);
+	fis->lba_low     = start & 0xFF;
+	fis->lba_mid     = (start >> 8) & 0xFF;
+	fis->lba_hi      = (start >> 16) & 0xFF;
+	fis->lba_low_ex  = (start >> 24) & 0xFF;
+	fis->lba_mid_ex  = (start >> 32) & 0xFF;
+	fis->lba_hi_ex   = (start >> 40) & 0xFF;
 	fis->device	 = 1 << 6;
 	fis->features    = nsect & 0xFF;
 	fis->features_ex = (nsect >> 8) & 0xFF;
diff --git a/drivers/block/mtip32xx/mtip32xx.h b/drivers/block/mtip32xx/mtip32xx.h
index 5f4a917..b174264 100644
--- a/drivers/block/mtip32xx/mtip32xx.h
+++ b/drivers/block/mtip32xx/mtip32xx.h
@@ -34,7 +34,7 @@
 #define PCIE_CONFIG_EXT_DEVICE_CONTROL_OFFSET	0x48
 
 /* check for erase mode support during secure erase */
-#define MTIP_SEC_ERASE_MODE     0x3
+#define MTIP_SEC_ERASE_MODE     0x2
 
 /* # of times to retry timed out/failed IOs */
 #define MTIP_MAX_RETRIES	2
@@ -155,14 +155,14 @@
 	MTIP_DDF_REBUILD_FAILED_BIT = 8,
 };
 
-__packed struct smart_attr{
+struct smart_attr {
 	u8 attr_id;
 	u16 flags;
 	u8 cur;
 	u8 worst;
 	u32 data;
 	u8 res[3];
-};
+} __packed;
 
 /* Register Frame Information Structure (FIS), host to device. */
 struct host_to_dev_fis {
diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index fc2de55..b00000e 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -67,6 +67,7 @@
 	{ USB_DEVICE(0x13d3, 0x3304) },
 	{ USB_DEVICE(0x0930, 0x0215) },
 	{ USB_DEVICE(0x0489, 0xE03D) },
+	{ USB_DEVICE(0x0489, 0xE027) },
 
 	/* Atheros AR9285 Malbec with sflash firmware */
 	{ USB_DEVICE(0x03F0, 0x311D) },
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index debda27..ee82f2f 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -124,6 +124,7 @@
 	{ USB_DEVICE(0x13d3, 0x3304), .driver_info = BTUSB_IGNORE },
 	{ USB_DEVICE(0x0930, 0x0215), .driver_info = BTUSB_IGNORE },
 	{ USB_DEVICE(0x0489, 0xe03d), .driver_info = BTUSB_IGNORE },
+	{ USB_DEVICE(0x0489, 0xe027), .driver_info = BTUSB_IGNORE },
 
 	/* Atheros AR9285 Malbec with sflash firmware */
 	{ USB_DEVICE(0x03f0, 0x311d), .driver_info = BTUSB_IGNORE },
diff --git a/drivers/bus/omap-ocp2scp.c b/drivers/bus/omap-ocp2scp.c
index ff63560..0c48b0e 100644
--- a/drivers/bus/omap-ocp2scp.c
+++ b/drivers/bus/omap-ocp2scp.c
@@ -22,6 +22,26 @@
 #include <linux/pm_runtime.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
+#include <linux/platform_data/omap_ocp2scp.h>
+
+/**
+ * _count_resources - count for the number of resources
+ * @res: struct resource *
+ *
+ * Count and return the number of resources populated for the device that is
+ * connected to ocp2scp.
+ */
+static unsigned _count_resources(struct resource *res)
+{
+	int cnt	= 0;
+
+	while (res->start != res->end) {
+		cnt++;
+		res++;
+	}
+
+	return cnt;
+}
 
 static int ocp2scp_remove_devices(struct device *dev, void *c)
 {
@@ -34,20 +54,62 @@
 
 static int __devinit omap_ocp2scp_probe(struct platform_device *pdev)
 {
-	int			ret;
-	struct device_node	*np = pdev->dev.of_node;
+	int ret;
+	unsigned res_cnt, i;
+	struct device_node *np = pdev->dev.of_node;
+	struct platform_device *pdev_child;
+	struct omap_ocp2scp_platform_data *pdata = pdev->dev.platform_data;
+	struct omap_ocp2scp_dev *dev;
 
 	if (np) {
 		ret = of_platform_populate(np, NULL, NULL, &pdev->dev);
 		if (ret) {
-			dev_err(&pdev->dev, "failed to add resources for ocp2scp child\n");
+			dev_err(&pdev->dev,
+			    "failed to add resources for ocp2scp child\n");
 			goto err0;
 		}
+	} else if (pdata) {
+		for (i = 0, dev = *pdata->devices; i < pdata->dev_cnt; i++,
+		    dev++) {
+			res_cnt = _count_resources(dev->res);
+
+			pdev_child = platform_device_alloc(dev->drv_name,
+			    PLATFORM_DEVID_AUTO);
+			if (!pdev_child) {
+				dev_err(&pdev->dev,
+				  "failed to allocate mem for ocp2scp child\n");
+				goto err0;
+			}
+
+			ret = platform_device_add_resources(pdev_child,
+			    dev->res, res_cnt);
+			if (ret) {
+				dev_err(&pdev->dev,
+				 "failed to add resources for ocp2scp child\n");
+				goto err1;
+			}
+
+			pdev_child->dev.parent	= &pdev->dev;
+
+			ret = platform_device_add(pdev_child);
+			if (ret) {
+				dev_err(&pdev->dev,
+				   "failed to register ocp2scp child device\n");
+				goto err1;
+			}
+		}
+	} else {
+		dev_err(&pdev->dev, "OCP2SCP initialized without plat data\n");
+		return -EINVAL;
 	}
+
 	pm_runtime_enable(&pdev->dev);
 
 	return 0;
 
+err1:
+	platform_device_put(pdev_child);
+
 err0:
 	device_for_each_child(&pdev->dev, NULL, ocp2scp_remove_devices);
 
diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
index fbd9b2b..c58ea9b 100644
--- a/drivers/char/hw_random/Kconfig
+++ b/drivers/char/hw_random/Kconfig
@@ -127,12 +127,12 @@
 	  If unsure, say Y.
 
 config HW_RANDOM_IXP4XX
-	tristate "Intel IXP4xx NPU HW Random Number Generator support"
+	tristate "Intel IXP4xx NPU HW Pseudo-Random Number Generator support"
 	depends on HW_RANDOM && ARCH_IXP4XX
 	default HW_RANDOM
 	---help---
-	  This driver provides kernel-side support for the Random
-	  Number Generator hardware found on the Intel IXP4xx NPU.
+	  This driver provides kernel-side support for the Pseudo-Random
+	  Number Generator hardware found on the Intel IXP45x/46x NPU.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called ixp4xx-rng.
diff --git a/drivers/char/hw_random/ixp4xx-rng.c b/drivers/char/hw_random/ixp4xx-rng.c
index 263567f..beec162 100644
--- a/drivers/char/hw_random/ixp4xx-rng.c
+++ b/drivers/char/hw_random/ixp4xx-rng.c
@@ -45,6 +45,9 @@
 	void __iomem * rng_base;
 	int err;
 
+	if (!cpu_is_ixp46x()) /* includes IXP455 */
+		return -ENOSYS;
+
 	rng_base = ioremap(0x70002100, 4);
 	if (!rng_base)
 		return -ENOMEM;
@@ -68,5 +71,5 @@
 module_exit(ixp4xx_rng_exit);
 
 MODULE_AUTHOR("Deepak Saxena <dsaxena@plexity.net>");
-MODULE_DESCRIPTION("H/W Random Number Generator (RNG) driver for IXP4xx");
+MODULE_DESCRIPTION("H/W Pseudo-Random Number Generator (RNG) driver for IXP45x/46x");
 MODULE_LICENSE("GPL");
diff --git a/drivers/char/raw.c b/drivers/char/raw.c
index 0bb207e..54a3a6d 100644
--- a/drivers/char/raw.c
+++ b/drivers/char/raw.c
@@ -285,7 +285,7 @@
 
 static const struct file_operations raw_fops = {
 	.read		= do_sync_read,
-	.aio_read	= blkdev_aio_read,
+	.aio_read	= generic_file_aio_read,
 	.write		= do_sync_write,
 	.aio_write	= blkdev_aio_write,
 	.fsync		= blkdev_fsync,
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index bace9e9..823f62d 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -42,10 +42,12 @@
 
 config COMMON_CLK_VERSATILE
 	bool "Clock driver for ARM Reference designs"
-	depends on ARCH_INTEGRATOR || ARCH_REALVIEW
+	depends on ARCH_INTEGRATOR || ARCH_REALVIEW || ARCH_VEXPRESS
 	---help---
-          Supports clocking on ARM Reference designs Integrator/AP,
-	  Integrator/CP, RealView PB1176, EB, PB11MP and PBX.
+          Supports clocking on ARM Reference designs:
+	  - Integrator/AP and Integrator/CP
+	  - RealView PB1176, EB, PB11MP and PBX
+	  - Versatile Express
 
 config COMMON_CLK_MAX77686
 	tristate "Clock driver for Maxim 77686 MFD"
@@ -53,4 +55,12 @@
 	---help---
 	  This driver supports Maxim 77686 crystal oscillator clock. 
 
+config CLK_TWL6040
+	tristate "External McPDM functional clock from twl6040"
+	depends on TWL6040_CORE
+	---help---
+	  Enable the external functional clock support on OMAP4+ platforms for
+	  McPDM. McPDM module is using the external bit clock on the McPDM bus
+	  as functional clock.
+
 endmenu
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 71a25b9..2701235 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -23,3 +23,4 @@
 # Chip specific
 obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o
 obj-$(CONFIG_COMMON_CLK_MAX77686) += clk-max77686.o
+obj-$(CONFIG_CLK_TWL6040)	+= clk-twl6040.o
diff --git a/drivers/clk/clk-bcm2835.c b/drivers/clk/clk-bcm2835.c
index 67ad16b..b61ee2c 100644
--- a/drivers/clk/clk-bcm2835.c
+++ b/drivers/clk/clk-bcm2835.c
@@ -33,17 +33,17 @@
 
 	clk = clk_register_fixed_rate(NULL, "sys_pclk", NULL, CLK_IS_ROOT,
 					250000000);
-	if (!clk)
+	if (IS_ERR(clk))
 		pr_err("sys_pclk not registered\n");
 
 	clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT,
 					126000000);
-	if (!clk)
+	if (IS_ERR(clk))
 		pr_err("apb_pclk not registered\n");
 
 	clk = clk_register_fixed_rate(NULL, "uart0_pclk", NULL, CLK_IS_ROOT,
 					3000000);
-	if (!clk)
+	if (IS_ERR(clk))
 		pr_err("uart0_pclk not registered\n");
 	ret = clk_register_clkdev(clk, NULL, "20201000.uart");
 	if (ret)
@@ -51,7 +51,7 @@
 
 	clk = clk_register_fixed_rate(NULL, "uart1_pclk", NULL, CLK_IS_ROOT,
 					125000000);
-	if (!clk)
+	if (IS_ERR(clk))
 		pr_err("uart1_pclk not registered\n");
 	ret = clk_register_clkdev(clk, NULL, "20215000.uart");
 	if (ret)
diff --git a/drivers/clk/clk-fixed-rate.c b/drivers/clk/clk-fixed-rate.c
index f5ec0ee..af78ed6 100644
--- a/drivers/clk/clk-fixed-rate.c
+++ b/drivers/clk/clk-fixed-rate.c
@@ -97,7 +97,7 @@
 	of_property_read_string(node, "clock-output-names", &clk_name);
 
 	clk = clk_register_fixed_rate(NULL, clk_name, NULL, CLK_IS_ROOT, rate);
-	if (clk)
+	if (!IS_ERR(clk))
 		of_clk_add_provider(node, of_clk_src_simple_get, clk);
 }
 EXPORT_SYMBOL_GPL(of_fixed_clk_setup);
diff --git a/drivers/clk/clk-prima2.c b/drivers/clk/clk-prima2.c
index 517874f..a203ecc 100644
--- a/drivers/clk/clk-prima2.c
+++ b/drivers/clk/clk-prima2.c
@@ -1054,118 +1054,118 @@
 	/* These are always available (RTC and 26MHz OSC)*/
 	clk = clk_register_fixed_rate(NULL, "rtc", NULL,
 		CLK_IS_ROOT, 32768);
-	BUG_ON(!clk);
+	BUG_ON(IS_ERR(clk));
 	clk = clk_register_fixed_rate(NULL, "osc", NULL,
 		CLK_IS_ROOT, 26000000);
-	BUG_ON(!clk);
+	BUG_ON(IS_ERR(clk));
 
 	clk = clk_register(NULL, &clk_pll1.hw);
-	BUG_ON(!clk);
+	BUG_ON(IS_ERR(clk));
 	clk = clk_register(NULL, &clk_pll2.hw);
-	BUG_ON(!clk);
+	BUG_ON(IS_ERR(clk));
 	clk = clk_register(NULL, &clk_pll3.hw);
-	BUG_ON(!clk);
+	BUG_ON(IS_ERR(clk));
 	clk = clk_register(NULL, &clk_mem.hw);
-	BUG_ON(!clk);
+	BUG_ON(IS_ERR(clk));
 	clk = clk_register(NULL, &clk_sys.hw);
-	BUG_ON(!clk);
+	BUG_ON(IS_ERR(clk));
 	clk = clk_register(NULL, &clk_security.hw);
-	BUG_ON(!clk);
+	BUG_ON(IS_ERR(clk));
 	clk_register_clkdev(clk, NULL, "b8030000.security");
 	clk = clk_register(NULL, &clk_dsp.hw);
-	BUG_ON(!clk);
+	BUG_ON(IS_ERR(clk));
 	clk = clk_register(NULL, &clk_gps.hw);
-	BUG_ON(!clk);
+	BUG_ON(IS_ERR(clk));
 	clk_register_clkdev(clk, NULL, "a8010000.gps");
 	clk = clk_register(NULL, &clk_mf.hw);
-	BUG_ON(!clk);
+	BUG_ON(IS_ERR(clk));
 	clk = clk_register(NULL, &clk_io.hw);
-	BUG_ON(!clk);
+	BUG_ON(IS_ERR(clk));
 	clk_register_clkdev(clk, NULL, "io");
 	clk = clk_register(NULL, &clk_cpu.hw);
-	BUG_ON(!clk);
+	BUG_ON(IS_ERR(clk));
 	clk_register_clkdev(clk, NULL, "cpu");
 	clk = clk_register(NULL, &clk_uart0.hw);
-	BUG_ON(!clk);
+	BUG_ON(IS_ERR(clk));
 	clk_register_clkdev(clk, NULL, "b0050000.uart");
 	clk = clk_register(NULL, &clk_uart1.hw);
-	BUG_ON(!clk);
+	BUG_ON(IS_ERR(clk));
 	clk_register_clkdev(clk, NULL, "b0060000.uart");
 	clk = clk_register(NULL, &clk_uart2.hw);
-	BUG_ON(!clk);
+	BUG_ON(IS_ERR(clk));
 	clk_register_clkdev(clk, NULL, "b0070000.uart");
 	clk = clk_register(NULL, &clk_tsc.hw);
-	BUG_ON(!clk);
+	BUG_ON(IS_ERR(clk));
 	clk_register_clkdev(clk, NULL, "b0110000.tsc");
 	clk = clk_register(NULL, &clk_i2c0.hw);
-	BUG_ON(!clk);
+	BUG_ON(IS_ERR(clk));
 	clk_register_clkdev(clk, NULL, "b00e0000.i2c");
 	clk = clk_register(NULL, &clk_i2c1.hw);
-	BUG_ON(!clk);
+	BUG_ON(IS_ERR(clk));
 	clk_register_clkdev(clk, NULL, "b00f0000.i2c");
 	clk = clk_register(NULL, &clk_spi0.hw);
-	BUG_ON(!clk);
+	BUG_ON(IS_ERR(clk));
 	clk_register_clkdev(clk, NULL, "b00d0000.spi");
 	clk = clk_register(NULL, &clk_spi1.hw);
-	BUG_ON(!clk);
+	BUG_ON(IS_ERR(clk));
 	clk_register_clkdev(clk, NULL, "b0170000.spi");
 	clk = clk_register(NULL, &clk_pwmc.hw);
-	BUG_ON(!clk);
+	BUG_ON(IS_ERR(clk));
 	clk_register_clkdev(clk, NULL, "b0130000.pwm");
 	clk = clk_register(NULL, &clk_efuse.hw);
-	BUG_ON(!clk);
+	BUG_ON(IS_ERR(clk));
 	clk_register_clkdev(clk, NULL, "b0140000.efusesys");
 	clk = clk_register(NULL, &clk_pulse.hw);
-	BUG_ON(!clk);
+	BUG_ON(IS_ERR(clk));
 	clk_register_clkdev(clk, NULL, "b0150000.pulsec");
 	clk = clk_register(NULL, &clk_dmac0.hw);
-	BUG_ON(!clk);
+	BUG_ON(IS_ERR(clk));
 	clk_register_clkdev(clk, NULL, "b00b0000.dma-controller");
 	clk = clk_register(NULL, &clk_dmac1.hw);
-	BUG_ON(!clk);
+	BUG_ON(IS_ERR(clk));
 	clk_register_clkdev(clk, NULL, "b0160000.dma-controller");
 	clk = clk_register(NULL, &clk_nand.hw);
-	BUG_ON(!clk);
+	BUG_ON(IS_ERR(clk));
 	clk_register_clkdev(clk, NULL, "b0030000.nand");
 	clk = clk_register(NULL, &clk_audio.hw);
-	BUG_ON(!clk);
+	BUG_ON(IS_ERR(clk));
 	clk_register_clkdev(clk, NULL, "b0040000.audio");
 	clk = clk_register(NULL, &clk_usp0.hw);
-	BUG_ON(!clk);
+	BUG_ON(IS_ERR(clk));
 	clk_register_clkdev(clk, NULL, "b0080000.usp");
 	clk = clk_register(NULL, &clk_usp1.hw);
-	BUG_ON(!clk);
+	BUG_ON(IS_ERR(clk));
 	clk_register_clkdev(clk, NULL, "b0090000.usp");
 	clk = clk_register(NULL, &clk_usp2.hw);
-	BUG_ON(!clk);
+	BUG_ON(IS_ERR(clk));
 	clk_register_clkdev(clk, NULL, "b00a0000.usp");
 	clk = clk_register(NULL, &clk_vip.hw);
-	BUG_ON(!clk);
+	BUG_ON(IS_ERR(clk));
 	clk_register_clkdev(clk, NULL, "b00c0000.vip");
 	clk = clk_register(NULL, &clk_gfx.hw);
-	BUG_ON(!clk);
+	BUG_ON(IS_ERR(clk));
 	clk_register_clkdev(clk, NULL, "98000000.graphics");
 	clk = clk_register(NULL, &clk_mm.hw);
-	BUG_ON(!clk);
+	BUG_ON(IS_ERR(clk));
 	clk_register_clkdev(clk, NULL, "a0000000.multimedia");
 	clk = clk_register(NULL, &clk_lcd.hw);
-	BUG_ON(!clk);
+	BUG_ON(IS_ERR(clk));
 	clk_register_clkdev(clk, NULL, "90010000.display");
 	clk = clk_register(NULL, &clk_vpp.hw);
-	BUG_ON(!clk);
+	BUG_ON(IS_ERR(clk));
 	clk_register_clkdev(clk, NULL, "90020000.vpp");
 	clk = clk_register(NULL, &clk_mmc01.hw);
-	BUG_ON(!clk);
+	BUG_ON(IS_ERR(clk));
 	clk = clk_register(NULL, &clk_mmc23.hw);
-	BUG_ON(!clk);
+	BUG_ON(IS_ERR(clk));
 	clk = clk_register(NULL, &clk_mmc45.hw);
-	BUG_ON(!clk);
+	BUG_ON(IS_ERR(clk));
 	clk = clk_register(NULL, &usb_pll_clk_hw);
-	BUG_ON(!clk);
+	BUG_ON(IS_ERR(clk));
 	clk = clk_register(NULL, &clk_usb0.hw);
-	BUG_ON(!clk);
+	BUG_ON(IS_ERR(clk));
 	clk_register_clkdev(clk, NULL, "b00e0000.usb");
 	clk = clk_register(NULL, &clk_usb1.hw);
-	BUG_ON(!clk);
+	BUG_ON(IS_ERR(clk));
 	clk_register_clkdev(clk, NULL, "b00f0000.usb");
 }
diff --git a/drivers/clk/clk-twl6040.c b/drivers/clk/clk-twl6040.c
new file mode 100644
index 0000000..bc1e713
--- /dev/null
+++ b/drivers/clk/clk-twl6040.c
@@ -0,0 +1,126 @@
+/*
+* TWL6040 clock module driver for OMAP4 McPDM functional clock
+*
+* Copyright (C) 2012 Texas Instruments Inc.
+* Peter Ujfalusi <peter.ujfalusi@ti.com>
+*
+* This program is free software; you can redistribute it and/or
+* modify it under the terms of the GNU General Public License
+* version 2 as published by the Free Software Foundation.
+*
+* This program is distributed in the hope that it will be useful, but
+* WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+* General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+* 02110-1301 USA
+*
+*/
+
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/twl6040.h>
+#include <linux/clk-provider.h>
+
+struct twl6040_clk {
+	struct twl6040 *twl6040;
+	struct device *dev;
+	struct clk_hw mcpdm_fclk;
+	struct clk *clk;
+	int enabled;
+};
+
+static int twl6040_bitclk_is_enabled(struct clk_hw *hw)
+{
+	struct twl6040_clk *twl6040_clk = container_of(hw, struct twl6040_clk,
+						       mcpdm_fclk);
+	return twl6040_clk->enabled;
+}
+
+static int twl6040_bitclk_prepare(struct clk_hw *hw)
+{
+	struct twl6040_clk *twl6040_clk = container_of(hw, struct twl6040_clk,
+						       mcpdm_fclk);
+	int ret;
+
+	ret = twl6040_power(twl6040_clk->twl6040, 1);
+	if (!ret)
+		twl6040_clk->enabled = 1;
+
+	return ret;
+}
+
+static void twl6040_bitclk_unprepare(struct clk_hw *hw)
+{
+	struct twl6040_clk *twl6040_clk = container_of(hw, struct twl6040_clk,
+						       mcpdm_fclk);
+	int ret;
+
+	ret = twl6040_power(twl6040_clk->twl6040, 0);
+	if (!ret)
+		twl6040_clk->enabled = 0;
+}
+
+static const struct clk_ops twl6040_mcpdm_ops = {
+	.is_enabled = twl6040_bitclk_is_enabled,
+	.prepare = twl6040_bitclk_prepare,
+	.unprepare = twl6040_bitclk_unprepare,
+};
+
+static struct clk_init_data wm831x_clkout_init = {
+	.name = "mcpdm_fclk",
+	.ops = &twl6040_mcpdm_ops,
+	.flags = CLK_IS_ROOT,
+};
+
+static int __devinit twl6040_clk_probe(struct platform_device *pdev)
+{
+	struct twl6040 *twl6040 = dev_get_drvdata(pdev->dev.parent);
+	struct twl6040_clk *clkdata;
+
+	clkdata = devm_kzalloc(&pdev->dev, sizeof(*clkdata), GFP_KERNEL);
+	if (!clkdata)
+		return -ENOMEM;
+
+	clkdata->dev = &pdev->dev;
+	clkdata->twl6040 = twl6040;
+
+	clkdata->mcpdm_fclk.init = &wm831x_clkout_init;
+	clkdata->clk = clk_register(&pdev->dev, &clkdata->mcpdm_fclk);
+	if (IS_ERR(clkdata->clk))
+		return PTR_ERR(clkdata->clk);
+
+	dev_set_drvdata(&pdev->dev, clkdata);
+
+	return 0;
+}
+
+static int __devexit twl6040_clk_remove(struct platform_device *pdev)
+{
+	struct twl6040_clk *clkdata = dev_get_drvdata(&pdev->dev);
+
+	clk_unregister(clkdata->clk);
+
+	return 0;
+}
+
+static struct platform_driver twl6040_clk_driver = {
+	.driver = {
+		.name = "twl6040-clk",
+		.owner = THIS_MODULE,
+	},
+	.probe = twl6040_clk_probe,
+	.remove = __devexit_p(twl6040_clk_remove),
+};
+
+module_platform_driver(twl6040_clk_driver);
+
+MODULE_DESCRIPTION("TWL6040 clock driver for McPDM functional clock");
+MODULE_AUTHOR("Peter Ujfalusi <peter.ujfalusi@ti.com>");
+MODULE_ALIAS("platform:twl6040-clk");
+MODULE_LICENSE("GPL");
diff --git a/drivers/clk/clk-vt8500.c b/drivers/clk/clk-vt8500.c
index a885600..fe25570 100644
--- a/drivers/clk/clk-vt8500.c
+++ b/drivers/clk/clk-vt8500.c
@@ -120,8 +120,17 @@
 static long vt8500_dclk_round_rate(struct clk_hw *hw, unsigned long rate,
 				unsigned long *prate)
 {
+	struct clk_device *cdev = to_clk_device(hw);
 	u32 divisor = *prate / rate;
 
+	/*
+	 * If this is a request for SDMMC we have to adjust the divisor
+	 * when >31 to use the fixed predivisor
+	 */
+	if ((cdev->div_mask == 0x3F) && (divisor > 31)) {
+		divisor = 64 * ((divisor / 64) + 1);
+	}
+
 	return *prate / divisor;
 }
 
@@ -135,6 +144,15 @@
 	if (divisor == cdev->div_mask + 1)
 		divisor = 0;
 
+	/* SDMMC mask may need to be corrected before testing if its valid */
+	if ((cdev->div_mask == 0x3F) && (divisor > 31)) {
+		/*
+		 * Bit 5 is a fixed /64 predivisor. If the requested divisor
+		 * is >31 then correct for the fixed divisor being required.
+		 */
+		divisor = 0x20 + (divisor / 64);
+	}
+
 	if (divisor > cdev->div_mask) {
 		pr_err("%s: invalid divisor for clock\n", __func__);
 		return -EINVAL;
diff --git a/drivers/clk/clk-wm831x.c b/drivers/clk/clk-wm831x.c
index 1b4e228..16ed068 100644
--- a/drivers/clk/clk-wm831x.c
+++ b/drivers/clk/clk-wm831x.c
@@ -370,43 +370,27 @@
 	clkdata->xtal_ena = ret & WM831X_XTAL_ENA;
 
 	clkdata->xtal_hw.init = &wm831x_xtal_init;
-	clkdata->xtal = clk_register(&pdev->dev, &clkdata->xtal_hw);
-	if (!clkdata->xtal)
-		return -EINVAL;
+	clkdata->xtal = devm_clk_register(&pdev->dev, &clkdata->xtal_hw);
+	if (IS_ERR(clkdata->xtal))
+		return PTR_ERR(clkdata->xtal);
 
 	clkdata->fll_hw.init = &wm831x_fll_init;
-	clkdata->fll = clk_register(&pdev->dev, &clkdata->fll_hw);
-	if (!clkdata->fll) {
-		ret = -EINVAL;
-		goto err_xtal;
-	}
+	clkdata->fll = devm_clk_register(&pdev->dev, &clkdata->fll_hw);
+	if (IS_ERR(clkdata->fll))
+		return PTR_ERR(clkdata->fll);
 
 	clkdata->clkout_hw.init = &wm831x_clkout_init;
-	clkdata->clkout = clk_register(&pdev->dev, &clkdata->clkout_hw);
-	if (!clkdata->clkout) {
-		ret = -EINVAL;
-		goto err_fll;
-	}
+	clkdata->clkout = devm_clk_register(&pdev->dev, &clkdata->clkout_hw);
+	if (IS_ERR(clkdata->clkout))
+		return PTR_ERR(clkdata->clkout);
 
 	dev_set_drvdata(&pdev->dev, clkdata);
 
 	return 0;
-
-err_fll:
-	clk_unregister(clkdata->fll);
-err_xtal:
-	clk_unregister(clkdata->xtal);
-	return ret;
 }
 
 static int wm831x_clk_remove(struct platform_device *pdev)
 {
-	struct wm831x_clk *clkdata = dev_get_drvdata(&pdev->dev);
-
-	clk_unregister(clkdata->clkout);
-	clk_unregister(clkdata->fll);
-	clk_unregister(clkdata->xtal);
-
 	return 0;
 }
 
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 56e4495e..251e45d 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -17,6 +17,7 @@
 #include <linux/list.h>
 #include <linux/slab.h>
 #include <linux/of.h>
+#include <linux/device.h>
 
 static DEFINE_SPINLOCK(enable_lock);
 static DEFINE_MUTEX(prepare_lock);
@@ -218,8 +219,17 @@
 	if (clk->flags & CLK_IGNORE_UNUSED)
 		goto unlock_out;
 
-	if (__clk_is_enabled(clk) && clk->ops->disable)
-		clk->ops->disable(clk->hw);
+	/*
+	 * some gate clocks have special needs during the disable-unused
+	 * sequence.  call .disable_unused if available, otherwise fall
+	 * back to .disable
+	 */
+	if (__clk_is_enabled(clk)) {
+		if (clk->ops->disable_unused)
+			clk->ops->disable_unused(clk->hw);
+		else if (clk->ops->disable)
+			clk->ops->disable(clk->hw);
+	}
 
 unlock_out:
 	spin_unlock_irqrestore(&enable_lock, flags);
@@ -261,7 +271,7 @@
 
 inline u8 __clk_get_num_parents(struct clk *clk)
 {
-	return !clk ? -EINVAL : clk->num_parents;
+	return !clk ? 0 : clk->num_parents;
 }
 
 inline struct clk *__clk_get_parent(struct clk *clk)
@@ -269,14 +279,14 @@
 	return !clk ? NULL : clk->parent;
 }
 
-inline int __clk_get_enable_count(struct clk *clk)
+inline unsigned int __clk_get_enable_count(struct clk *clk)
 {
-	return !clk ? -EINVAL : clk->enable_count;
+	return !clk ? 0 : clk->enable_count;
 }
 
-inline int __clk_get_prepare_count(struct clk *clk)
+inline unsigned int __clk_get_prepare_count(struct clk *clk)
 {
-	return !clk ? -EINVAL : clk->prepare_count;
+	return !clk ? 0 : clk->prepare_count;
 }
 
 unsigned long __clk_get_rate(struct clk *clk)
@@ -302,15 +312,15 @@
 
 inline unsigned long __clk_get_flags(struct clk *clk)
 {
-	return !clk ? -EINVAL : clk->flags;
+	return !clk ? 0 : clk->flags;
 }
 
-int __clk_is_enabled(struct clk *clk)
+bool __clk_is_enabled(struct clk *clk)
 {
 	int ret;
 
 	if (!clk)
-		return -EINVAL;
+		return false;
 
 	/*
 	 * .is_enabled is only mandatory for clocks that gate
@@ -323,7 +333,7 @@
 
 	ret = clk->ops->is_enabled(clk->hw);
 out:
-	return ret;
+	return !!ret;
 }
 
 static struct clk *__clk_lookup_subtree(const char *name, struct clk *clk)
@@ -568,7 +578,7 @@
 	unsigned long parent_rate = 0;
 
 	if (!clk)
-		return -EINVAL;
+		return 0;
 
 	if (!clk->ops->round_rate) {
 		if (clk->flags & CLK_SET_RATE_PARENT)
@@ -1297,12 +1307,20 @@
 	 * walk the list of orphan clocks and reparent any that are children of
 	 * this clock
 	 */
-	hlist_for_each_entry_safe(orphan, tmp, tmp2, &clk_orphan_list, child_node)
+	hlist_for_each_entry_safe(orphan, tmp, tmp2, &clk_orphan_list, child_node) {
+		if (orphan->ops->get_parent) {
+			i = orphan->ops->get_parent(orphan->hw);
+			if (!strcmp(clk->name, orphan->parent_names[i]))
+				__clk_reparent(orphan, clk);
+			continue;
+		}
+
 		for (i = 0; i < orphan->num_parents; i++)
 			if (!strcmp(clk->name, orphan->parent_names[i])) {
 				__clk_reparent(orphan, clk);
 				break;
 			}
+	 }
 
 	/*
 	 * optional platform-specific magic
@@ -1361,28 +1379,9 @@
 }
 EXPORT_SYMBOL_GPL(__clk_register);
 
-/**
- * clk_register - allocate a new clock, register it and return an opaque cookie
- * @dev: device that is registering this clock
- * @hw: link to hardware-specific clock data
- *
- * clk_register is the primary interface for populating the clock tree with new
- * clock nodes.  It returns a pointer to the newly allocated struct clk which
- * cannot be dereferenced by driver code but may be used in conjuction with the
- * rest of the clock API.  In the event of an error clk_register will return an
- * error code; drivers must test for an error code after calling clk_register.
- */
-struct clk *clk_register(struct device *dev, struct clk_hw *hw)
+static int _clk_register(struct device *dev, struct clk_hw *hw, struct clk *clk)
 {
 	int i, ret;
-	struct clk *clk;
-
-	clk = kzalloc(sizeof(*clk), GFP_KERNEL);
-	if (!clk) {
-		pr_err("%s: could not allocate clk\n", __func__);
-		ret = -ENOMEM;
-		goto fail_out;
-	}
 
 	clk->name = kstrdup(hw->init->name, GFP_KERNEL);
 	if (!clk->name) {
@@ -1420,7 +1419,7 @@
 
 	ret = __clk_init(dev, clk);
 	if (!ret)
-		return clk;
+		return 0;
 
 fail_parent_names_copy:
 	while (--i >= 0)
@@ -1429,6 +1428,36 @@
 fail_parent_names:
 	kfree(clk->name);
 fail_name:
+	return ret;
+}
+
+/**
+ * clk_register - allocate a new clock, register it and return an opaque cookie
+ * @dev: device that is registering this clock
+ * @hw: link to hardware-specific clock data
+ *
+ * clk_register is the primary interface for populating the clock tree with new
+ * clock nodes.  It returns a pointer to the newly allocated struct clk which
+ * cannot be dereferenced by driver code but may be used in conjuction with the
+ * rest of the clock API.  In the event of an error clk_register will return an
+ * error code; drivers must test for an error code after calling clk_register.
+ */
+struct clk *clk_register(struct device *dev, struct clk_hw *hw)
+{
+	int ret;
+	struct clk *clk;
+
+	clk = kzalloc(sizeof(*clk), GFP_KERNEL);
+	if (!clk) {
+		pr_err("%s: could not allocate clk\n", __func__);
+		ret = -ENOMEM;
+		goto fail_out;
+	}
+
+	ret = _clk_register(dev, hw, clk);
+	if (!ret)
+		return clk;
+
 	kfree(clk);
 fail_out:
 	return ERR_PTR(ret);
@@ -1444,6 +1473,63 @@
 void clk_unregister(struct clk *clk) {}
 EXPORT_SYMBOL_GPL(clk_unregister);
 
+static void devm_clk_release(struct device *dev, void *res)
+{
+	clk_unregister(res);
+}
+
+/**
+ * devm_clk_register - resource managed clk_register()
+ * @dev: device that is registering this clock
+ * @hw: link to hardware-specific clock data
+ *
+ * Managed clk_register(). Clocks returned from this function are
+ * automatically clk_unregister()ed on driver detach. See clk_register() for
+ * more information.
+ */
+struct clk *devm_clk_register(struct device *dev, struct clk_hw *hw)
+{
+	struct clk *clk;
+	int ret;
+
+	clk = devres_alloc(devm_clk_release, sizeof(*clk), GFP_KERNEL);
+	if (!clk)
+		return ERR_PTR(-ENOMEM);
+
+	ret = _clk_register(dev, hw, clk);
+	if (!ret) {
+		devres_add(dev, clk);
+	} else {
+		devres_free(clk);
+		clk = ERR_PTR(ret);
+	}
+
+	return clk;
+}
+EXPORT_SYMBOL_GPL(devm_clk_register);
+
+static int devm_clk_match(struct device *dev, void *res, void *data)
+{
+	struct clk *c = res;
+	if (WARN_ON(!c))
+		return 0;
+	return c == data;
+}
+
+/**
+ * devm_clk_unregister - resource managed clk_unregister()
+ * @clk: clock to unregister
+ *
+ * Deallocate a clock allocated with devm_clk_register(). Normally
+ * this function will not need to be called and the resource management
+ * code will ensure that the resource is freed.
+ */
+void devm_clk_unregister(struct device *dev, struct clk *clk)
+{
+	WARN_ON(devres_release(dev, devm_clk_release, devm_clk_match, clk));
+}
+EXPORT_SYMBOL_GPL(devm_clk_unregister);
+
 /***        clk rate change notifiers        ***/
 
 /**
diff --git a/drivers/clk/mxs/clk-imx23.c b/drivers/clk/mxs/clk-imx23.c
index f00dffb..8dd476e 100644
--- a/drivers/clk/mxs/clk-imx23.c
+++ b/drivers/clk/mxs/clk-imx23.c
@@ -85,7 +85,7 @@
 	cpu_xtal, hbus, xbus, lcdif_div, ssp_div, gpmi_div, emi_pll,
 	emi_xtal, etm_div, saif_div, clk32k_div, rtc, adc, spdif_div,
 	clk32k, dri, pwm, filt, uart, ssp, gpmi, spdif, emi, saif,
-	lcdif, etm, usb, usb_pwr,
+	lcdif, etm, usb, usb_phy,
 	clk_max
 };
 
@@ -143,8 +143,8 @@
 	clks[saif] = mxs_clk_gate("saif", "saif_div", SAIF, 31);
 	clks[lcdif] = mxs_clk_gate("lcdif", "lcdif_div", PIX, 31);
 	clks[etm] = mxs_clk_gate("etm", "etm_div", ETM, 31);
-	clks[usb] = mxs_clk_gate("usb", "usb_pwr", DIGCTRL, 2);
-	clks[usb_pwr] = clk_register_gate(NULL, "usb_pwr", "pll", 0, PLLCTRL0, 18, 0, &mxs_lock);
+	clks[usb] = mxs_clk_gate("usb", "usb_phy", DIGCTRL, 2);
+	clks[usb_phy] = clk_register_gate(NULL, "usb_phy", "pll", 0, PLLCTRL0, 18, 0, &mxs_lock);
 
 	for (i = 0; i < ARRAY_SIZE(clks); i++)
 		if (IS_ERR(clks[i])) {
diff --git a/drivers/clk/mxs/clk-imx28.c b/drivers/clk/mxs/clk-imx28.c
index 42978f1b..db3af08 100644
--- a/drivers/clk/mxs/clk-imx28.c
+++ b/drivers/clk/mxs/clk-imx28.c
@@ -140,7 +140,7 @@
 	emi_xtal, lcdif_div, etm_div, ptp, saif0_div, saif1_div,
 	clk32k_div, rtc, lradc, spdif_div, clk32k, pwm, uart, ssp0,
 	ssp1, ssp2, ssp3, gpmi, spdif, emi, saif0, saif1, lcdif, etm,
-	fec, can0, can1, usb0, usb1, usb0_pwr, usb1_pwr, enet_out,
+	fec, can0, can1, usb0, usb1, usb0_phy, usb1_phy, enet_out,
 	clk_max
 };
 
@@ -218,10 +218,10 @@
 	clks[fec] = mxs_clk_gate("fec", "hbus", ENET, 30);
 	clks[can0] = mxs_clk_gate("can0", "ref_xtal", FLEXCAN, 30);
 	clks[can1] = mxs_clk_gate("can1", "ref_xtal", FLEXCAN, 28);
-	clks[usb0] = mxs_clk_gate("usb0", "usb0_pwr", DIGCTRL, 2);
-	clks[usb1] = mxs_clk_gate("usb1", "usb1_pwr", DIGCTRL, 16);
-	clks[usb0_pwr] = clk_register_gate(NULL, "usb0_pwr", "pll0", 0, PLL0CTRL0, 18, 0, &mxs_lock);
-	clks[usb1_pwr] = clk_register_gate(NULL, "usb1_pwr", "pll1", 0, PLL1CTRL0, 18, 0, &mxs_lock);
+	clks[usb0] = mxs_clk_gate("usb0", "usb0_phy", DIGCTRL, 2);
+	clks[usb1] = mxs_clk_gate("usb1", "usb1_phy", DIGCTRL, 16);
+	clks[usb0_phy] = clk_register_gate(NULL, "usb0_phy", "pll0", 0, PLL0CTRL0, 18, 0, &mxs_lock);
+	clks[usb1_phy] = clk_register_gate(NULL, "usb1_phy", "pll1", 0, PLL1CTRL0, 18, 0, &mxs_lock);
 	clks[enet_out] = clk_register_gate(NULL, "enet_out", "pll2", 0, ENET, 18, 0, &mxs_lock);
 
 	for (i = 0; i < ARRAY_SIZE(clks); i++)
diff --git a/drivers/clk/spear/clk-aux-synth.c b/drivers/clk/spear/clk-aux-synth.c
index 6756e7c..bdfb4421 100644
--- a/drivers/clk/spear/clk-aux-synth.c
+++ b/drivers/clk/spear/clk-aux-synth.c
@@ -179,7 +179,8 @@
 	if (gate_name) {
 		struct clk *tgate_clk;
 
-		tgate_clk = clk_register_gate(NULL, gate_name, aux_name, 0, reg,
+		tgate_clk = clk_register_gate(NULL, gate_name, aux_name,
+				CLK_SET_RATE_PARENT, reg,
 				aux->masks->enable_bit, 0, lock);
 		if (IS_ERR_OR_NULL(tgate_clk))
 			goto free_aux;
diff --git a/drivers/clk/spear/clk-vco-pll.c b/drivers/clk/spear/clk-vco-pll.c
index 5f1b6ba..1b9b65b 100644
--- a/drivers/clk/spear/clk-vco-pll.c
+++ b/drivers/clk/spear/clk-vco-pll.c
@@ -147,7 +147,7 @@
 	struct clk_pll *pll = to_clk_pll(hw);
 	struct pll_rate_tbl *rtbl = pll->vco->rtbl;
 	unsigned long flags = 0, val;
-	int i;
+	int uninitialized_var(i);
 
 	clk_pll_round_rate_index(hw, drate, NULL, &i);
 
diff --git a/drivers/clk/spear/clk.c b/drivers/clk/spear/clk.c
index 7cd6378..628b6d5 100644
--- a/drivers/clk/spear/clk.c
+++ b/drivers/clk/spear/clk.c
@@ -32,5 +32,8 @@
 		}
 	}
 
+	if ((*index) == rtbl_cnt)
+		(*index)--;
+
 	return rate;
 }
diff --git a/drivers/clk/spear/spear1310_clock.c b/drivers/clk/spear/spear1310_clock.c
index 0fcec2a..147e25f 100644
--- a/drivers/clk/spear/spear1310_clock.c
+++ b/drivers/clk/spear/spear1310_clock.c
@@ -313,6 +313,20 @@
 /* i2s prs1 aux rate configuration table, in ascending order of rates */
 static struct aux_rate_tbl i2s_prs1_rtbl[] = {
 	/* For parent clk = 49.152 MHz */
+	{.xscale = 1, .yscale = 12, .eq = 0}, /* 2.048 MHz, smp freq = 8Khz */
+	{.xscale = 11, .yscale = 96, .eq = 0}, /* 2.816 MHz, smp freq = 11Khz */
+	{.xscale = 1, .yscale = 6, .eq = 0}, /* 4.096 MHz, smp freq = 16Khz */
+	{.xscale = 11, .yscale = 48, .eq = 0}, /* 5.632 MHz, smp freq = 22Khz */
+
+	/*
+	 * with parent clk = 49.152, freq gen is 8.192 MHz, smp freq = 32Khz
+	 * with parent clk = 12.288, freq gen is 2.048 MHz, smp freq = 8Khz
+	 */
+	{.xscale = 1, .yscale = 3, .eq = 0},
+
+	/* For parent clk = 49.152 MHz */
+	{.xscale = 17, .yscale = 37, .eq = 0}, /* 11.289 MHz, smp freq = 44Khz*/
+
 	{.xscale = 1, .yscale = 2, .eq = 0}, /* 12.288 MHz */
 };
 
@@ -374,9 +388,6 @@
 {
 	struct clk *clk, *clk1;
 
-	clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0);
-	clk_register_clkdev(clk, "apb_pclk", NULL);
-
 	clk = clk_register_fixed_rate(NULL, "osc_32k_clk", NULL, CLK_IS_ROOT,
 			32000);
 	clk_register_clkdev(clk, "osc_32k_clk", NULL);
@@ -401,7 +412,7 @@
 	clk = clk_register_gate(NULL, "rtc-spear", "osc_32k_clk", 0,
 			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_RTC_CLK_ENB, 0,
 			&_lock);
-	clk_register_clkdev(clk, NULL, "fc900000.rtc");
+	clk_register_clkdev(clk, NULL, "e0580000.rtc");
 
 	/* clock derived from 24 or 25 MHz osc clk */
 	/* vco-pll */
@@ -483,13 +494,18 @@
 	clk_register_clkdev(clk, "ddr_clk", NULL);
 
 	/* clock derived from pll1 clk */
-	clk = clk_register_fixed_factor(NULL, "cpu_clk", "pll1_clk", 0, 1, 2);
+	clk = clk_register_fixed_factor(NULL, "cpu_clk", "pll1_clk",
+			CLK_SET_RATE_PARENT, 1, 2);
 	clk_register_clkdev(clk, "cpu_clk", NULL);
 
 	clk = clk_register_fixed_factor(NULL, "wdt_clk", "cpu_clk", 0, 1,
 			2);
 	clk_register_clkdev(clk, NULL, "ec800620.wdt");
 
+	clk = clk_register_fixed_factor(NULL, "smp_twd_clk", "cpu_clk", 0, 1,
+			2);
+	clk_register_clkdev(clk, NULL, "smp_twd");
+
 	clk = clk_register_fixed_factor(NULL, "ahb_clk", "pll1_clk", 0, 1,
 			6);
 	clk_register_clkdev(clk, "ahb_clk", NULL);
@@ -547,14 +563,14 @@
 	clk_register_clkdev(clk1, "uart_syn_gclk", NULL);
 
 	clk = clk_register_mux(NULL, "uart0_mclk", uart0_parents,
-			ARRAY_SIZE(uart0_parents), 0, SPEAR1310_PERIP_CLK_CFG,
-			SPEAR1310_UART_CLK_SHIFT, SPEAR1310_UART_CLK_MASK, 0,
-			&_lock);
+			ARRAY_SIZE(uart0_parents), CLK_SET_RATE_PARENT,
+			SPEAR1310_PERIP_CLK_CFG, SPEAR1310_UART_CLK_SHIFT,
+			SPEAR1310_UART_CLK_MASK, 0, &_lock);
 	clk_register_clkdev(clk, "uart0_mclk", NULL);
 
-	clk = clk_register_gate(NULL, "uart0_clk", "uart0_mclk", 0,
-			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_UART_CLK_ENB, 0,
-			&_lock);
+	clk = clk_register_gate(NULL, "uart0_clk", "uart0_mclk",
+			CLK_SET_RATE_PARENT, SPEAR1310_PERIP1_CLK_ENB,
+			SPEAR1310_UART_CLK_ENB, 0, &_lock);
 	clk_register_clkdev(clk, NULL, "e0000000.serial");
 
 	clk = clk_register_aux("sdhci_syn_clk", "sdhci_syn_gclk",
@@ -563,9 +579,9 @@
 	clk_register_clkdev(clk, "sdhci_syn_clk", NULL);
 	clk_register_clkdev(clk1, "sdhci_syn_gclk", NULL);
 
-	clk = clk_register_gate(NULL, "sdhci_clk", "sdhci_syn_gclk", 0,
-			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_SDHCI_CLK_ENB, 0,
-			&_lock);
+	clk = clk_register_gate(NULL, "sdhci_clk", "sdhci_syn_gclk",
+			CLK_SET_RATE_PARENT, SPEAR1310_PERIP1_CLK_ENB,
+			SPEAR1310_SDHCI_CLK_ENB, 0, &_lock);
 	clk_register_clkdev(clk, NULL, "b3000000.sdhci");
 
 	clk = clk_register_aux("cfxd_syn_clk", "cfxd_syn_gclk", "vco1div2_clk",
@@ -574,9 +590,9 @@
 	clk_register_clkdev(clk, "cfxd_syn_clk", NULL);
 	clk_register_clkdev(clk1, "cfxd_syn_gclk", NULL);
 
-	clk = clk_register_gate(NULL, "cfxd_clk", "cfxd_syn_gclk", 0,
-			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_CFXD_CLK_ENB, 0,
-			&_lock);
+	clk = clk_register_gate(NULL, "cfxd_clk", "cfxd_syn_gclk",
+			CLK_SET_RATE_PARENT, SPEAR1310_PERIP1_CLK_ENB,
+			SPEAR1310_CFXD_CLK_ENB, 0, &_lock);
 	clk_register_clkdev(clk, NULL, "b2800000.cf");
 	clk_register_clkdev(clk, NULL, "arasan_xd");
 
@@ -587,9 +603,9 @@
 	clk_register_clkdev(clk1, "c3_syn_gclk", NULL);
 
 	clk = clk_register_mux(NULL, "c3_mclk", c3_parents,
-			ARRAY_SIZE(c3_parents), 0, SPEAR1310_PERIP_CLK_CFG,
-			SPEAR1310_C3_CLK_SHIFT, SPEAR1310_C3_CLK_MASK, 0,
-			&_lock);
+			ARRAY_SIZE(c3_parents), CLK_SET_RATE_PARENT,
+			SPEAR1310_PERIP_CLK_CFG, SPEAR1310_C3_CLK_SHIFT,
+			SPEAR1310_C3_CLK_MASK, 0, &_lock);
 	clk_register_clkdev(clk, "c3_mclk", NULL);
 
 	clk = clk_register_gate(NULL, "c3_clk", "c3_mclk", 0,
@@ -615,7 +631,7 @@
 			ARRAY_SIZE(gmac_phy_parents), 0,
 			SPEAR1310_PERIP_CLK_CFG, SPEAR1310_GMAC_PHY_CLK_SHIFT,
 			SPEAR1310_GMAC_PHY_CLK_MASK, 0, &_lock);
-	clk_register_clkdev(clk, NULL, "stmmacphy.0");
+	clk_register_clkdev(clk, "stmmacphy.0", NULL);
 
 	/* clcd */
 	clk = clk_register_mux(NULL, "clcd_syn_mclk", clcd_synth_parents,
@@ -630,22 +646,22 @@
 	clk_register_clkdev(clk, "clcd_syn_clk", NULL);
 
 	clk = clk_register_mux(NULL, "clcd_pixel_mclk", clcd_pixel_parents,
-			ARRAY_SIZE(clcd_pixel_parents), 0,
+			ARRAY_SIZE(clcd_pixel_parents), CLK_SET_RATE_PARENT,
 			SPEAR1310_PERIP_CLK_CFG, SPEAR1310_CLCD_CLK_SHIFT,
 			SPEAR1310_CLCD_CLK_MASK, 0, &_lock);
-	clk_register_clkdev(clk, "clcd_pixel_clk", NULL);
+	clk_register_clkdev(clk, "clcd_pixel_mclk", NULL);
 
 	clk = clk_register_gate(NULL, "clcd_clk", "clcd_pixel_mclk", 0,
 			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_CLCD_CLK_ENB, 0,
 			&_lock);
-	clk_register_clkdev(clk, "clcd_clk", NULL);
+	clk_register_clkdev(clk, NULL, "e1000000.clcd");
 
 	/* i2s */
 	clk = clk_register_mux(NULL, "i2s_src_mclk", i2s_src_parents,
 			ARRAY_SIZE(i2s_src_parents), 0, SPEAR1310_I2S_CLK_CFG,
 			SPEAR1310_I2S_SRC_CLK_SHIFT, SPEAR1310_I2S_SRC_CLK_MASK,
 			0, &_lock);
-	clk_register_clkdev(clk, "i2s_src_clk", NULL);
+	clk_register_clkdev(clk, "i2s_src_mclk", NULL);
 
 	clk = clk_register_aux("i2s_prs1_clk", NULL, "i2s_src_mclk", 0,
 			SPEAR1310_I2S_CLK_CFG, &i2s_prs1_masks, i2s_prs1_rtbl,
@@ -653,10 +669,10 @@
 	clk_register_clkdev(clk, "i2s_prs1_clk", NULL);
 
 	clk = clk_register_mux(NULL, "i2s_ref_mclk", i2s_ref_parents,
-			ARRAY_SIZE(i2s_ref_parents), 0, SPEAR1310_I2S_CLK_CFG,
-			SPEAR1310_I2S_REF_SHIFT, SPEAR1310_I2S_REF_SEL_MASK, 0,
-			&_lock);
-	clk_register_clkdev(clk, "i2s_ref_clk", NULL);
+			ARRAY_SIZE(i2s_ref_parents), CLK_SET_RATE_PARENT,
+			SPEAR1310_I2S_CLK_CFG, SPEAR1310_I2S_REF_SHIFT,
+			SPEAR1310_I2S_REF_SEL_MASK, 0, &_lock);
+	clk_register_clkdev(clk, "i2s_ref_mclk", NULL);
 
 	clk = clk_register_gate(NULL, "i2s_ref_pad_clk", "i2s_ref_mclk", 0,
 			SPEAR1310_PERIP2_CLK_ENB, SPEAR1310_I2S_REF_PAD_CLK_ENB,
@@ -664,7 +680,7 @@
 	clk_register_clkdev(clk, "i2s_ref_pad_clk", NULL);
 
 	clk = clk_register_aux("i2s_sclk_clk", "i2s_sclk_gclk",
-			"i2s_ref_pad_clk", 0, SPEAR1310_I2S_CLK_CFG,
+			"i2s_ref_mclk", 0, SPEAR1310_I2S_CLK_CFG,
 			&i2s_sclk_masks, i2s_sclk_rtbl,
 			ARRAY_SIZE(i2s_sclk_rtbl), &_lock, &clk1);
 	clk_register_clkdev(clk, "i2s_sclk_clk", NULL);
@@ -705,35 +721,37 @@
 	clk = clk_register_gate(NULL, "usbh0_clk", "ahb_clk", 0,
 			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_UHC0_CLK_ENB, 0,
 			&_lock);
-	clk_register_clkdev(clk, "usbh.0_clk", NULL);
+	clk_register_clkdev(clk, NULL, "e4000000.ohci");
+	clk_register_clkdev(clk, NULL, "e4800000.ehci");
 
 	clk = clk_register_gate(NULL, "usbh1_clk", "ahb_clk", 0,
 			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_UHC1_CLK_ENB, 0,
 			&_lock);
-	clk_register_clkdev(clk, "usbh.1_clk", NULL);
+	clk_register_clkdev(clk, NULL, "e5000000.ohci");
+	clk_register_clkdev(clk, NULL, "e5800000.ehci");
 
 	clk = clk_register_gate(NULL, "uoc_clk", "ahb_clk", 0,
 			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_UOC_CLK_ENB, 0,
 			&_lock);
-	clk_register_clkdev(clk, NULL, "uoc");
+	clk_register_clkdev(clk, NULL, "e3800000.otg");
 
 	clk = clk_register_gate(NULL, "pcie_sata_0_clk", "ahb_clk", 0,
 			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_PCIE_SATA_0_CLK_ENB,
 			0, &_lock);
 	clk_register_clkdev(clk, NULL, "dw_pcie.0");
-	clk_register_clkdev(clk, NULL, "ahci.0");
+	clk_register_clkdev(clk, NULL, "b1000000.ahci");
 
 	clk = clk_register_gate(NULL, "pcie_sata_1_clk", "ahb_clk", 0,
 			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_PCIE_SATA_1_CLK_ENB,
 			0, &_lock);
 	clk_register_clkdev(clk, NULL, "dw_pcie.1");
-	clk_register_clkdev(clk, NULL, "ahci.1");
+	clk_register_clkdev(clk, NULL, "b1800000.ahci");
 
 	clk = clk_register_gate(NULL, "pcie_sata_2_clk", "ahb_clk", 0,
 			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_PCIE_SATA_2_CLK_ENB,
 			0, &_lock);
 	clk_register_clkdev(clk, NULL, "dw_pcie.2");
-	clk_register_clkdev(clk, NULL, "ahci.2");
+	clk_register_clkdev(clk, NULL, "b4000000.ahci");
 
 	clk = clk_register_gate(NULL, "sysram0_clk", "ahb_clk", 0,
 			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_SYSRAM0_CLK_ENB, 0,
@@ -751,10 +769,10 @@
 	clk_register_clkdev(clk, "adc_syn_clk", NULL);
 	clk_register_clkdev(clk1, "adc_syn_gclk", NULL);
 
-	clk = clk_register_gate(NULL, "adc_clk", "adc_syn_gclk", 0,
-			SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_ADC_CLK_ENB, 0,
-			&_lock);
-	clk_register_clkdev(clk, NULL, "adc_clk");
+	clk = clk_register_gate(NULL, "adc_clk", "adc_syn_gclk",
+			CLK_SET_RATE_PARENT, SPEAR1310_PERIP1_CLK_ENB,
+			SPEAR1310_ADC_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "e0080000.adc");
 
 	/* clock derived from apb clk */
 	clk = clk_register_gate(NULL, "ssp0_clk", "apb_clk", 0,
@@ -916,15 +934,15 @@
 			SPEAR1310_RAS_CTRL_REG1,
 			SPEAR1310_SMII_RGMII_PHY_CLK_SHIFT,
 			SPEAR1310_PHY_CLK_MASK, 0, &_lock);
-	clk_register_clkdev(clk, NULL, "stmmacphy.1");
-	clk_register_clkdev(clk, NULL, "stmmacphy.2");
-	clk_register_clkdev(clk, NULL, "stmmacphy.4");
+	clk_register_clkdev(clk, "stmmacphy.1", NULL);
+	clk_register_clkdev(clk, "stmmacphy.2", NULL);
+	clk_register_clkdev(clk, "stmmacphy.4", NULL);
 
 	clk = clk_register_mux(NULL, "rmii_phy_mclk", rmii_phy_parents,
 			ARRAY_SIZE(rmii_phy_parents), 0,
 			SPEAR1310_RAS_CTRL_REG1, SPEAR1310_RMII_PHY_CLK_SHIFT,
 			SPEAR1310_PHY_CLK_MASK, 0, &_lock);
-	clk_register_clkdev(clk, NULL, "stmmacphy.3");
+	clk_register_clkdev(clk, "stmmacphy.3", NULL);
 
 	clk = clk_register_mux(NULL, "uart1_mclk", uart_parents,
 			ARRAY_SIZE(uart_parents), 0, SPEAR1310_RAS_CTRL_REG0,
diff --git a/drivers/clk/spear/spear1340_clock.c b/drivers/clk/spear/spear1340_clock.c
index 2352cee..82abea3 100644
--- a/drivers/clk/spear/spear1340_clock.c
+++ b/drivers/clk/spear/spear1340_clock.c
@@ -190,6 +190,7 @@
  * different values of vco1div2
  */
 static struct frac_rate_tbl amba_synth_rtbl[] = {
+	{.div = 0x073A8}, /* for vco1div2 = 600 MHz */
 	{.div = 0x06062}, /* for vco1div2 = 500 MHz */
 	{.div = 0x04D1B}, /* for vco1div2 = 400 MHz */
 	{.div = 0x04000}, /* for vco1div2 = 332 MHz */
@@ -220,6 +221,12 @@
  * 500			400		200			0x02800
  * 500			500		250			0x02000
  * --------------------------------------------------------------------
+ * 600			200		100			0x06000
+ * 600			250		125			0x04CCE
+ * 600			332		166			0x039D5
+ * 600			400		200			0x03000
+ * 600			500		250			0x02666
+ * --------------------------------------------------------------------
  * 664			200		100			0x06a38
  * 664			250		125			0x054FD
  * 664			332		166			0x04000
@@ -238,28 +245,50 @@
 	{.div = 0x08000},
 	{.div = 0x06a38},
 	{.div = 0x06666},
+	{.div = 0x06000},
 	{.div = 0x054FD},
 	{.div = 0x05000},
 	{.div = 0x04D18},
+	{.div = 0x04CCE},
 	{.div = 0x04000},
+	{.div = 0x039D5},
 	{.div = 0x0351E},
 	{.div = 0x03333},
 	{.div = 0x03031},
+	{.div = 0x03000},
 	{.div = 0x02A7E},
 	{.div = 0x02800},
 	{.div = 0x0268D},
+	{.div = 0x02666},
 	{.div = 0x02000},
 };
 
 /* aux rate configuration table, in ascending order of rates */
 static struct aux_rate_tbl aux_rtbl[] = {
-	/* For VCO1div2 = 500 MHz */
-	{.xscale = 10, .yscale = 204, .eq = 0}, /* 12.29 MHz */
-	{.xscale = 4, .yscale = 21, .eq = 0}, /* 48 MHz */
-	{.xscale = 2, .yscale = 6, .eq = 0}, /* 83 MHz */
-	{.xscale = 2, .yscale = 4, .eq = 0}, /* 125 MHz */
-	{.xscale = 1, .yscale = 3, .eq = 1}, /* 166 MHz */
-	{.xscale = 1, .yscale = 2, .eq = 1}, /* 250 MHz */
+	/* 12.29MHz for vic1div2=600MHz and 10.24MHz for VCO1div2=500MHz */
+	{.xscale = 5, .yscale = 122, .eq = 0},
+	/* 14.70MHz for vic1div2=600MHz and 12.29MHz for VCO1div2=500MHz */
+	{.xscale = 10, .yscale = 204, .eq = 0},
+	/* 48MHz for vic1div2=600MHz and 40 MHz for VCO1div2=500MHz */
+	{.xscale = 4, .yscale = 25, .eq = 0},
+	/* 57.14MHz for vic1div2=600MHz and 48 MHz for VCO1div2=500MHz */
+	{.xscale = 4, .yscale = 21, .eq = 0},
+	/* 83.33MHz for vic1div2=600MHz and 69.44MHz for VCO1div2=500MHz */
+	{.xscale = 5, .yscale = 18, .eq = 0},
+	/* 100MHz for vic1div2=600MHz and 83.33 MHz for VCO1div2=500MHz */
+	{.xscale = 2, .yscale = 6, .eq = 0},
+	/* 125MHz for vic1div2=600MHz and 104.1MHz for VCO1div2=500MHz */
+	{.xscale = 5, .yscale = 12, .eq = 0},
+	/* 150MHz for vic1div2=600MHz and 125MHz for VCO1div2=500MHz */
+	{.xscale = 2, .yscale = 4, .eq = 0},
+	/* 166MHz for vic1div2=600MHz and 138.88MHz for VCO1div2=500MHz */
+	{.xscale = 5, .yscale = 18, .eq = 1},
+	/* 200MHz for vic1div2=600MHz and 166MHz for VCO1div2=500MHz */
+	{.xscale = 1, .yscale = 3, .eq = 1},
+	/* 250MHz for vic1div2=600MHz and 208.33MHz for VCO1div2=500MHz */
+	{.xscale = 5, .yscale = 12, .eq = 1},
+	/* 300MHz for vic1div2=600MHz and 250MHz for VCO1div2=500MHz */
+	{.xscale = 1, .yscale = 2, .eq = 1},
 };
 
 /* gmac rate configuration table, in ascending order of rates */
@@ -273,16 +302,23 @@
 
 /* clcd rate configuration table, in ascending order of rates */
 static struct frac_rate_tbl clcd_rtbl[] = {
+	{.div = 0x18000}, /* 25 Mhz , for vc01div4 = 300 MHz*/
+	{.div = 0x1638E}, /* 27 Mhz , for vc01div4 = 300 MHz*/
 	{.div = 0x14000}, /* 25 Mhz , for vc01div4 = 250 MHz*/
 	{.div = 0x1284B}, /* 27 Mhz , for vc01div4 = 250 MHz*/
 	{.div = 0x0D8D3}, /* 58 Mhz , for vco1div4 = 393 MHz */
 	{.div = 0x0B72C}, /* 58 Mhz , for vco1div4 = 332 MHz */
+	{.div = 0x0A584}, /* 58 Mhz , for vco1div4 = 300 MHz */
+	{.div = 0x093B1}, /* 65 Mhz , for vc01div4 = 300 MHz*/
 	{.div = 0x089EE}, /* 58 Mhz , for vc01div4 = 250 MHz*/
+	{.div = 0x081BA}, /* 74 Mhz , for vc01div4 = 300 MHz*/
 	{.div = 0x07BA0}, /* 65 Mhz , for vc01div4 = 250 MHz*/
 	{.div = 0x06f1C}, /* 72 Mhz , for vc01div4 = 250 MHz*/
 	{.div = 0x06E58}, /* 58 Mhz , for vco1div4 = 200 MHz */
 	{.div = 0x06c1B}, /* 74 Mhz , for vc01div4 = 250 MHz*/
+	{.div = 0x058E3}, /* 108 Mhz , for vc01div4 = 300 MHz*/
 	{.div = 0x04A12}, /* 108 Mhz , for vc01div4 = 250 MHz*/
+	{.div = 0x040A5}, /* 148.5 Mhz , for vc01div4 = 300 MHz*/
 	{.div = 0x0378E}, /* 144 Mhz , for vc01div4 = 250 MHz*/
 	{.div = 0x0360D}, /* 148 Mhz , for vc01div4 = 250 MHz*/
 	{.div = 0x035E0}, /* 148.5 MHz, for vc01div4 = 250 MHz*/
@@ -351,26 +387,37 @@
 
 /* General synth rate configuration table, in ascending order of rates */
 static struct frac_rate_tbl gen_rtbl[] = {
-	/* For vco1div4 = 250 MHz */
-	{.div = 0x1624E}, /* 22.5792 MHz */
-	{.div = 0x14585}, /* 24.576 MHz */
-	{.div = 0x14000}, /* 25 MHz */
-	{.div = 0x0B127}, /* 45.1584 MHz */
-	{.div = 0x0A000}, /* 50 MHz */
-	{.div = 0x061A8}, /* 81.92 MHz */
-	{.div = 0x05000}, /* 100 MHz */
-	{.div = 0x02800}, /* 200 MHz */
-	{.div = 0x02620}, /* 210 MHz */
-	{.div = 0x02460}, /* 220 MHz */
-	{.div = 0x022C0}, /* 230 MHz */
-	{.div = 0x02160}, /* 240 MHz */
-	{.div = 0x02000}, /* 250 MHz */
+	{.div = 0x1A92B}, /* 22.5792 MHz for vco1div4=300 MHz*/
+	{.div = 0x186A0}, /* 24.576 MHz for vco1div4=300 MHz*/
+	{.div = 0x18000}, /* 25 MHz for vco1div4=300 MHz*/
+	{.div = 0x1624E}, /* 22.5792 MHz for vco1div4=250 MHz*/
+	{.div = 0x14585}, /* 24.576 MHz for vco1div4=250 MHz*/
+	{.div = 0x14000}, /* 25 MHz for vco1div4=250 MHz*/
+	{.div = 0x0D495}, /* 45.1584 MHz for vco1div4=300 MHz*/
+	{.div = 0x0C000}, /* 50 MHz for vco1div4=300 MHz*/
+	{.div = 0x0B127}, /* 45.1584 MHz for vco1div4=250 MHz*/
+	{.div = 0x0A000}, /* 50 MHz for vco1div4=250 MHz*/
+	{.div = 0x07530}, /* 81.92 MHz for vco1div4=300 MHz*/
+	{.div = 0x061A8}, /* 81.92 MHz for vco1div4=250 MHz*/
+	{.div = 0x06000}, /* 100 MHz for vco1div4=300 MHz*/
+	{.div = 0x05000}, /* 100 MHz for vco1div4=250 MHz*/
+	{.div = 0x03000}, /* 200 MHz for vco1div4=300 MHz*/
+	{.div = 0x02DB6}, /* 210 MHz for vco1div4=300 MHz*/
+	{.div = 0x02BA2}, /* 220 MHz for vco1div4=300 MHz*/
+	{.div = 0x029BD}, /* 230 MHz for vco1div4=300 MHz*/
+	{.div = 0x02800}, /* 200 MHz for vco1div4=250 MHz*/
+	{.div = 0x02666}, /* 250 MHz for vco1div4=300 MHz*/
+	{.div = 0x02620}, /* 210 MHz for vco1div4=250 MHz*/
+	{.div = 0x02460}, /* 220 MHz for vco1div4=250 MHz*/
+	{.div = 0x022C0}, /* 230 MHz for vco1div4=250 MHz*/
+	{.div = 0x02160}, /* 240 MHz for vco1div4=250 MHz*/
+	{.div = 0x02000}, /* 250 MHz for vco1div4=250 MHz*/
 };
 
 /* clock parents */
 static const char *vco_parents[] = { "osc_24m_clk", "osc_25m_clk", };
 static const char *sys_parents[] = { "pll1_clk", "pll1_clk", "pll1_clk",
-	"pll1_clk", "sys_synth_clk", "sys_synth_clk", "pll2_clk", "pll3_clk", };
+	"pll1_clk", "sys_syn_clk", "sys_syn_clk", "pll2_clk", "pll3_clk", };
 static const char *ahb_parents[] = { "cpu_div3_clk", "amba_syn_clk", };
 static const char *gpt_parents[] = { "osc_24m_clk", "apb_clk", };
 static const char *uart0_parents[] = { "pll5_clk", "osc_24m_clk",
@@ -391,16 +438,13 @@
 
 static const char *gen_synth0_1_parents[] = { "vco1div4_clk", "vco3div2_clk",
 	"pll3_clk", };
-static const char *gen_synth2_3_parents[] = { "vco1div4_clk", "vco3div2_clk",
+static const char *gen_synth2_3_parents[] = { "vco1div4_clk", "vco2div2_clk",
 	"pll2_clk", };
 
 void __init spear1340_clk_init(void)
 {
 	struct clk *clk, *clk1;
 
-	clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0);
-	clk_register_clkdev(clk, "apb_pclk", NULL);
-
 	clk = clk_register_fixed_rate(NULL, "osc_32k_clk", NULL, CLK_IS_ROOT,
 			32000);
 	clk_register_clkdev(clk, "osc_32k_clk", NULL);
@@ -425,7 +469,7 @@
 	clk = clk_register_gate(NULL, "rtc-spear", "osc_32k_clk", 0,
 			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_RTC_CLK_ENB, 0,
 			&_lock);
-	clk_register_clkdev(clk, NULL, "fc900000.rtc");
+	clk_register_clkdev(clk, NULL, "e0580000.rtc");
 
 	/* clock derived from 24 or 25 MHz osc clk */
 	/* vco-pll */
@@ -499,7 +543,7 @@
 	clk = clk_register_gate(NULL, "thermal_gclk", "thermal_clk", 0,
 			SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_THSENS_CLK_ENB, 0,
 			&_lock);
-	clk_register_clkdev(clk, NULL, "spear_thermal");
+	clk_register_clkdev(clk, NULL, "e07008c4.thermal");
 
 	/* clock derived from pll4 clk */
 	clk = clk_register_fixed_factor(NULL, "ddr_clk", "pll4_clk", 0, 1,
@@ -521,7 +565,7 @@
 			ARRAY_SIZE(sys_parents), 0, SPEAR1340_SYS_CLK_CTRL,
 			SPEAR1340_SCLK_SRC_SEL_SHIFT,
 			SPEAR1340_SCLK_SRC_SEL_MASK, 0, &_lock);
-	clk_register_clkdev(clk, "sys_clk", NULL);
+	clk_register_clkdev(clk, "sys_mclk", NULL);
 
 	clk = clk_register_fixed_factor(NULL, "cpu_clk", "sys_mclk", 0, 1,
 			2);
@@ -535,6 +579,10 @@
 			2);
 	clk_register_clkdev(clk, NULL, "ec800620.wdt");
 
+	clk = clk_register_fixed_factor(NULL, "smp_twd_clk", "cpu_clk", 0, 1,
+			2);
+	clk_register_clkdev(clk, NULL, "smp_twd");
+
 	clk = clk_register_mux(NULL, "ahb_clk", ahb_parents,
 			ARRAY_SIZE(ahb_parents), 0, SPEAR1340_SYS_CLK_CTRL,
 			SPEAR1340_HCLK_SRC_SEL_SHIFT,
@@ -594,14 +642,14 @@
 	clk_register_clkdev(clk1, "uart0_syn_gclk", NULL);
 
 	clk = clk_register_mux(NULL, "uart0_mclk", uart0_parents,
-			ARRAY_SIZE(uart0_parents), 0, SPEAR1340_PERIP_CLK_CFG,
-			SPEAR1340_UART0_CLK_SHIFT, SPEAR1340_UART_CLK_MASK, 0,
-			&_lock);
+			ARRAY_SIZE(uart0_parents), CLK_SET_RATE_PARENT,
+			SPEAR1340_PERIP_CLK_CFG, SPEAR1340_UART0_CLK_SHIFT,
+			SPEAR1340_UART_CLK_MASK, 0, &_lock);
 	clk_register_clkdev(clk, "uart0_mclk", NULL);
 
-	clk = clk_register_gate(NULL, "uart0_clk", "uart0_mclk", 0,
-			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_UART0_CLK_ENB, 0,
-			&_lock);
+	clk = clk_register_gate(NULL, "uart0_clk", "uart0_mclk",
+			CLK_SET_RATE_PARENT, SPEAR1340_PERIP1_CLK_ENB,
+			SPEAR1340_UART0_CLK_ENB, 0, &_lock);
 	clk_register_clkdev(clk, NULL, "e0000000.serial");
 
 	clk = clk_register_aux("uart1_syn_clk", "uart1_syn_gclk",
@@ -627,9 +675,9 @@
 	clk_register_clkdev(clk, "sdhci_syn_clk", NULL);
 	clk_register_clkdev(clk1, "sdhci_syn_gclk", NULL);
 
-	clk = clk_register_gate(NULL, "sdhci_clk", "sdhci_syn_gclk", 0,
-			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_SDHCI_CLK_ENB, 0,
-			&_lock);
+	clk = clk_register_gate(NULL, "sdhci_clk", "sdhci_syn_gclk",
+			CLK_SET_RATE_PARENT, SPEAR1340_PERIP1_CLK_ENB,
+			SPEAR1340_SDHCI_CLK_ENB, 0, &_lock);
 	clk_register_clkdev(clk, NULL, "b3000000.sdhci");
 
 	clk = clk_register_aux("cfxd_syn_clk", "cfxd_syn_gclk", "vco1div2_clk",
@@ -638,9 +686,9 @@
 	clk_register_clkdev(clk, "cfxd_syn_clk", NULL);
 	clk_register_clkdev(clk1, "cfxd_syn_gclk", NULL);
 
-	clk = clk_register_gate(NULL, "cfxd_clk", "cfxd_syn_gclk", 0,
-			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_CFXD_CLK_ENB, 0,
-			&_lock);
+	clk = clk_register_gate(NULL, "cfxd_clk", "cfxd_syn_gclk",
+			CLK_SET_RATE_PARENT, SPEAR1340_PERIP1_CLK_ENB,
+			SPEAR1340_CFXD_CLK_ENB, 0, &_lock);
 	clk_register_clkdev(clk, NULL, "b2800000.cf");
 	clk_register_clkdev(clk, NULL, "arasan_xd");
 
@@ -651,15 +699,15 @@
 	clk_register_clkdev(clk1, "c3_syn_gclk", NULL);
 
 	clk = clk_register_mux(NULL, "c3_mclk", c3_parents,
-			ARRAY_SIZE(c3_parents), 0, SPEAR1340_PERIP_CLK_CFG,
-			SPEAR1340_C3_CLK_SHIFT, SPEAR1340_C3_CLK_MASK, 0,
-			&_lock);
+			ARRAY_SIZE(c3_parents), CLK_SET_RATE_PARENT,
+			SPEAR1340_PERIP_CLK_CFG, SPEAR1340_C3_CLK_SHIFT,
+			SPEAR1340_C3_CLK_MASK, 0, &_lock);
 	clk_register_clkdev(clk, "c3_mclk", NULL);
 
-	clk = clk_register_gate(NULL, "c3_clk", "c3_mclk", 0,
+	clk = clk_register_gate(NULL, "c3_clk", "c3_mclk", CLK_SET_RATE_PARENT,
 			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_C3_CLK_ENB, 0,
 			&_lock);
-	clk_register_clkdev(clk, NULL, "c3");
+	clk_register_clkdev(clk, NULL, "e1800000.c3");
 
 	/* gmac */
 	clk = clk_register_mux(NULL, "phy_input_mclk", gmac_phy_input_parents,
@@ -679,7 +727,7 @@
 			ARRAY_SIZE(gmac_phy_parents), 0,
 			SPEAR1340_PERIP_CLK_CFG, SPEAR1340_GMAC_PHY_CLK_SHIFT,
 			SPEAR1340_GMAC_PHY_CLK_MASK, 0, &_lock);
-	clk_register_clkdev(clk, NULL, "stmmacphy.0");
+	clk_register_clkdev(clk, "stmmacphy.0", NULL);
 
 	/* clcd */
 	clk = clk_register_mux(NULL, "clcd_syn_mclk", clcd_synth_parents,
@@ -694,33 +742,34 @@
 	clk_register_clkdev(clk, "clcd_syn_clk", NULL);
 
 	clk = clk_register_mux(NULL, "clcd_pixel_mclk", clcd_pixel_parents,
-			ARRAY_SIZE(clcd_pixel_parents), 0,
+			ARRAY_SIZE(clcd_pixel_parents), CLK_SET_RATE_PARENT,
 			SPEAR1340_PERIP_CLK_CFG, SPEAR1340_CLCD_CLK_SHIFT,
 			SPEAR1340_CLCD_CLK_MASK, 0, &_lock);
-	clk_register_clkdev(clk, "clcd_pixel_clk", NULL);
+	clk_register_clkdev(clk, "clcd_pixel_mclk", NULL);
 
 	clk = clk_register_gate(NULL, "clcd_clk", "clcd_pixel_mclk", 0,
 			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_CLCD_CLK_ENB, 0,
 			&_lock);
-	clk_register_clkdev(clk, "clcd_clk", NULL);
+	clk_register_clkdev(clk, NULL, "e1000000.clcd");
 
 	/* i2s */
 	clk = clk_register_mux(NULL, "i2s_src_mclk", i2s_src_parents,
 			ARRAY_SIZE(i2s_src_parents), 0, SPEAR1340_I2S_CLK_CFG,
 			SPEAR1340_I2S_SRC_CLK_SHIFT, SPEAR1340_I2S_SRC_CLK_MASK,
 			0, &_lock);
-	clk_register_clkdev(clk, "i2s_src_clk", NULL);
+	clk_register_clkdev(clk, "i2s_src_mclk", NULL);
 
-	clk = clk_register_aux("i2s_prs1_clk", NULL, "i2s_src_mclk", 0,
-			SPEAR1340_I2S_CLK_CFG, &i2s_prs1_masks, i2s_prs1_rtbl,
+	clk = clk_register_aux("i2s_prs1_clk", NULL, "i2s_src_mclk",
+			CLK_SET_RATE_PARENT, SPEAR1340_I2S_CLK_CFG,
+			&i2s_prs1_masks, i2s_prs1_rtbl,
 			ARRAY_SIZE(i2s_prs1_rtbl), &_lock, NULL);
 	clk_register_clkdev(clk, "i2s_prs1_clk", NULL);
 
 	clk = clk_register_mux(NULL, "i2s_ref_mclk", i2s_ref_parents,
-			ARRAY_SIZE(i2s_ref_parents), 0, SPEAR1340_I2S_CLK_CFG,
-			SPEAR1340_I2S_REF_SHIFT, SPEAR1340_I2S_REF_SEL_MASK, 0,
-			&_lock);
-	clk_register_clkdev(clk, "i2s_ref_clk", NULL);
+			ARRAY_SIZE(i2s_ref_parents), CLK_SET_RATE_PARENT,
+			SPEAR1340_I2S_CLK_CFG, SPEAR1340_I2S_REF_SHIFT,
+			SPEAR1340_I2S_REF_SEL_MASK, 0, &_lock);
+	clk_register_clkdev(clk, "i2s_ref_mclk", NULL);
 
 	clk = clk_register_gate(NULL, "i2s_ref_pad_clk", "i2s_ref_mclk", 0,
 			SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_I2S_REF_PAD_CLK_ENB,
@@ -769,23 +818,25 @@
 	clk = clk_register_gate(NULL, "usbh0_clk", "ahb_clk", 0,
 			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_UHC0_CLK_ENB, 0,
 			&_lock);
-	clk_register_clkdev(clk, "usbh.0_clk", NULL);
+	clk_register_clkdev(clk, NULL, "e4000000.ohci");
+	clk_register_clkdev(clk, NULL, "e4800000.ehci");
 
 	clk = clk_register_gate(NULL, "usbh1_clk", "ahb_clk", 0,
 			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_UHC1_CLK_ENB, 0,
 			&_lock);
-	clk_register_clkdev(clk, "usbh.1_clk", NULL);
+	clk_register_clkdev(clk, NULL, "e5000000.ohci");
+	clk_register_clkdev(clk, NULL, "e5800000.ehci");
 
 	clk = clk_register_gate(NULL, "uoc_clk", "ahb_clk", 0,
 			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_UOC_CLK_ENB, 0,
 			&_lock);
-	clk_register_clkdev(clk, NULL, "uoc");
+	clk_register_clkdev(clk, NULL, "e3800000.otg");
 
 	clk = clk_register_gate(NULL, "pcie_sata_clk", "ahb_clk", 0,
 			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_PCIE_SATA_CLK_ENB,
 			0, &_lock);
 	clk_register_clkdev(clk, NULL, "dw_pcie");
-	clk_register_clkdev(clk, NULL, "ahci");
+	clk_register_clkdev(clk, NULL, "b1000000.ahci");
 
 	clk = clk_register_gate(NULL, "sysram0_clk", "ahb_clk", 0,
 			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_SYSRAM0_CLK_ENB, 0,
@@ -803,10 +854,10 @@
 	clk_register_clkdev(clk, "adc_syn_clk", NULL);
 	clk_register_clkdev(clk1, "adc_syn_gclk", NULL);
 
-	clk = clk_register_gate(NULL, "adc_clk", "adc_syn_gclk", 0,
-			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_ADC_CLK_ENB, 0,
-			&_lock);
-	clk_register_clkdev(clk, NULL, "adc_clk");
+	clk = clk_register_gate(NULL, "adc_clk", "adc_syn_gclk",
+			CLK_SET_RATE_PARENT, SPEAR1340_PERIP1_CLK_ENB,
+			SPEAR1340_ADC_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "e0080000.adc");
 
 	/* clock derived from apb clk */
 	clk = clk_register_gate(NULL, "ssp_clk", "apb_clk", 0,
@@ -827,12 +878,12 @@
 	clk = clk_register_gate(NULL, "i2s_play_clk", "apb_clk", 0,
 			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_I2S_PLAY_CLK_ENB, 0,
 			&_lock);
-	clk_register_clkdev(clk, NULL, "b2400000.i2s");
+	clk_register_clkdev(clk, NULL, "b2400000.i2s-play");
 
 	clk = clk_register_gate(NULL, "i2s_rec_clk", "apb_clk", 0,
 			SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_I2S_REC_CLK_ENB, 0,
 			&_lock);
-	clk_register_clkdev(clk, NULL, "b2000000.i2s");
+	clk_register_clkdev(clk, NULL, "b2000000.i2s-rec");
 
 	clk = clk_register_gate(NULL, "kbd_clk", "apb_clk", 0,
 			SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_KBD_CLK_ENB, 0,
@@ -844,37 +895,37 @@
 			ARRAY_SIZE(gen_synth0_1_parents), 0, SPEAR1340_PLL_CFG,
 			SPEAR1340_GEN_SYNT0_1_CLK_SHIFT,
 			SPEAR1340_GEN_SYNT_CLK_MASK, 0, &_lock);
-	clk_register_clkdev(clk, "gen_syn0_1_clk", NULL);
+	clk_register_clkdev(clk, "gen_syn0_1_mclk", NULL);
 
 	clk = clk_register_mux(NULL, "gen_syn2_3_mclk", gen_synth2_3_parents,
 			ARRAY_SIZE(gen_synth2_3_parents), 0, SPEAR1340_PLL_CFG,
 			SPEAR1340_GEN_SYNT2_3_CLK_SHIFT,
 			SPEAR1340_GEN_SYNT_CLK_MASK, 0, &_lock);
-	clk_register_clkdev(clk, "gen_syn2_3_clk", NULL);
+	clk_register_clkdev(clk, "gen_syn2_3_mclk", NULL);
 
-	clk = clk_register_frac("gen_syn0_clk", "gen_syn0_1_clk", 0,
+	clk = clk_register_frac("gen_syn0_clk", "gen_syn0_1_mclk", 0,
 			SPEAR1340_GEN_CLK_SYNT0, gen_rtbl, ARRAY_SIZE(gen_rtbl),
 			&_lock);
 	clk_register_clkdev(clk, "gen_syn0_clk", NULL);
 
-	clk = clk_register_frac("gen_syn1_clk", "gen_syn0_1_clk", 0,
+	clk = clk_register_frac("gen_syn1_clk", "gen_syn0_1_mclk", 0,
 			SPEAR1340_GEN_CLK_SYNT1, gen_rtbl, ARRAY_SIZE(gen_rtbl),
 			&_lock);
 	clk_register_clkdev(clk, "gen_syn1_clk", NULL);
 
-	clk = clk_register_frac("gen_syn2_clk", "gen_syn2_3_clk", 0,
+	clk = clk_register_frac("gen_syn2_clk", "gen_syn2_3_mclk", 0,
 			SPEAR1340_GEN_CLK_SYNT2, gen_rtbl, ARRAY_SIZE(gen_rtbl),
 			&_lock);
 	clk_register_clkdev(clk, "gen_syn2_clk", NULL);
 
-	clk = clk_register_frac("gen_syn3_clk", "gen_syn2_3_clk", 0,
+	clk = clk_register_frac("gen_syn3_clk", "gen_syn2_3_mclk", 0,
 			SPEAR1340_GEN_CLK_SYNT3, gen_rtbl, ARRAY_SIZE(gen_rtbl),
 			&_lock);
 	clk_register_clkdev(clk, "gen_syn3_clk", NULL);
 
-	clk = clk_register_gate(NULL, "mali_clk", "gen_syn3_clk", 0,
-			SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_MALI_CLK_ENB, 0,
-			&_lock);
+	clk = clk_register_gate(NULL, "mali_clk", "gen_syn3_clk",
+			CLK_SET_RATE_PARENT, SPEAR1340_PERIP3_CLK_ENB,
+			SPEAR1340_MALI_CLK_ENB, 0, &_lock);
 	clk_register_clkdev(clk, NULL, "mali");
 
 	clk = clk_register_gate(NULL, "cec0_clk", "ahb_clk", 0,
@@ -888,26 +939,26 @@
 	clk_register_clkdev(clk, NULL, "spear_cec.1");
 
 	clk = clk_register_mux(NULL, "spdif_out_mclk", spdif_out_parents,
-			ARRAY_SIZE(spdif_out_parents), 0,
+			ARRAY_SIZE(spdif_out_parents), CLK_SET_RATE_PARENT,
 			SPEAR1340_PERIP_CLK_CFG, SPEAR1340_SPDIF_OUT_CLK_SHIFT,
 			SPEAR1340_SPDIF_CLK_MASK, 0, &_lock);
 	clk_register_clkdev(clk, "spdif_out_mclk", NULL);
 
-	clk = clk_register_gate(NULL, "spdif_out_clk", "spdif_out_mclk", 0,
-			SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_SPDIF_OUT_CLK_ENB,
-			0, &_lock);
-	clk_register_clkdev(clk, NULL, "spdif-out");
+	clk = clk_register_gate(NULL, "spdif_out_clk", "spdif_out_mclk",
+			CLK_SET_RATE_PARENT, SPEAR1340_PERIP3_CLK_ENB,
+			SPEAR1340_SPDIF_OUT_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "d0000000.spdif-out");
 
 	clk = clk_register_mux(NULL, "spdif_in_mclk", spdif_in_parents,
-			ARRAY_SIZE(spdif_in_parents), 0,
+			ARRAY_SIZE(spdif_in_parents), CLK_SET_RATE_PARENT,
 			SPEAR1340_PERIP_CLK_CFG, SPEAR1340_SPDIF_IN_CLK_SHIFT,
 			SPEAR1340_SPDIF_CLK_MASK, 0, &_lock);
 	clk_register_clkdev(clk, "spdif_in_mclk", NULL);
 
-	clk = clk_register_gate(NULL, "spdif_in_clk", "spdif_in_mclk", 0,
-			SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_SPDIF_IN_CLK_ENB, 0,
-			&_lock);
-	clk_register_clkdev(clk, NULL, "spdif-in");
+	clk = clk_register_gate(NULL, "spdif_in_clk", "spdif_in_mclk",
+			CLK_SET_RATE_PARENT, SPEAR1340_PERIP3_CLK_ENB,
+			SPEAR1340_SPDIF_IN_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "d0100000.spdif-in");
 
 	clk = clk_register_gate(NULL, "acp_clk", "acp_mclk", 0,
 			SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_ACP_CLK_ENB, 0,
@@ -917,7 +968,7 @@
 	clk = clk_register_gate(NULL, "plgpio_clk", "plgpio_mclk", 0,
 			SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_PLGPIO_CLK_ENB, 0,
 			&_lock);
-	clk_register_clkdev(clk, NULL, "plgpio");
+	clk_register_clkdev(clk, NULL, "e2800000.gpio");
 
 	clk = clk_register_gate(NULL, "video_dec_clk", "video_dec_mclk", 0,
 			SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_VIDEO_DEC_CLK_ENB,
@@ -937,25 +988,25 @@
 	clk = clk_register_gate(NULL, "cam0_clk", "cam0_mclk", 0,
 			SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM0_CLK_ENB, 0,
 			&_lock);
-	clk_register_clkdev(clk, NULL, "spear_camif.0");
+	clk_register_clkdev(clk, NULL, "d0200000.cam0");
 
 	clk = clk_register_gate(NULL, "cam1_clk", "cam1_mclk", 0,
 			SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM1_CLK_ENB, 0,
 			&_lock);
-	clk_register_clkdev(clk, NULL, "spear_camif.1");
+	clk_register_clkdev(clk, NULL, "d0300000.cam1");
 
 	clk = clk_register_gate(NULL, "cam2_clk", "cam2_mclk", 0,
 			SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM2_CLK_ENB, 0,
 			&_lock);
-	clk_register_clkdev(clk, NULL, "spear_camif.2");
+	clk_register_clkdev(clk, NULL, "d0400000.cam2");
 
 	clk = clk_register_gate(NULL, "cam3_clk", "cam3_mclk", 0,
 			SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM3_CLK_ENB, 0,
 			&_lock);
-	clk_register_clkdev(clk, NULL, "spear_camif.3");
+	clk_register_clkdev(clk, NULL, "d0500000.cam3");
 
-	clk = clk_register_gate(NULL, "pwm_clk", "pwm_mclk", 0,
+	clk = clk_register_gate(NULL, "pwm_clk", "ahb_clk", 0,
 			SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_PWM_CLK_ENB, 0,
 			&_lock);
-	clk_register_clkdev(clk, NULL, "pwm");
+	clk_register_clkdev(clk, NULL, "e0180000.pwm");
 }
diff --git a/drivers/clk/spear/spear3xx_clock.c b/drivers/clk/spear/spear3xx_clock.c
index c315745..33d3ac5 100644
--- a/drivers/clk/spear/spear3xx_clock.c
+++ b/drivers/clk/spear/spear3xx_clock.c
@@ -107,6 +107,12 @@
 /* aux rate configuration table, in ascending order of rates */
 static struct aux_rate_tbl aux_rtbl[] = {
 	/* For PLL1 = 332 MHz */
+	{.xscale = 1, .yscale = 81, .eq = 0}, /* 2.049 MHz */
+	{.xscale = 1, .yscale = 59, .eq = 0}, /* 2.822 MHz */
+	{.xscale = 2, .yscale = 81, .eq = 0}, /* 4.098 MHz */
+	{.xscale = 3, .yscale = 89, .eq = 0}, /* 5.644 MHz */
+	{.xscale = 4, .yscale = 81, .eq = 0}, /* 8.197 MHz */
+	{.xscale = 4, .yscale = 59, .eq = 0}, /* 11.254 MHz */
 	{.xscale = 2, .yscale = 27, .eq = 0}, /* 12.296 MHz */
 	{.xscale = 2, .yscale = 8, .eq = 0}, /* 41.5 MHz */
 	{.xscale = 2, .yscale = 4, .eq = 0}, /* 83 MHz */
@@ -157,6 +163,8 @@
 			1);
 	clk_register_clkdev(clk, NULL, "a0000000.kbd");
 }
+#else
+static inline void spear300_clk_init(void) { }
 #endif
 
 /* array of all spear 310 clock lookups */
@@ -197,6 +205,8 @@
 			1);
 	clk_register_clkdev(clk, NULL, "b2200000.serial");
 }
+#else
+static inline void spear310_clk_init(void) { }
 #endif
 
 /* array of all spear 320 clock lookups */
@@ -251,7 +261,7 @@
 
 	clk = clk_register_fixed_factor(NULL, "pwm_clk", "ras_ahb_clk", 0, 1,
 			1);
-	clk_register_clkdev(clk, "pwm", NULL);
+	clk_register_clkdev(clk, NULL, "a8000000.pwm");
 
 	clk = clk_register_fixed_factor(NULL, "ssp1_clk", "ras_ahb_clk", 0, 1,
 			1);
@@ -271,26 +281,37 @@
 
 	clk = clk_register_fixed_factor(NULL, "i2s_clk", "ras_apb_clk", 0, 1,
 			1);
-	clk_register_clkdev(clk, NULL, "i2s");
+	clk_register_clkdev(clk, NULL, "a9400000.i2s");
 
 	clk = clk_register_mux(NULL, "i2s_ref_clk", i2s_ref_parents,
-			ARRAY_SIZE(i2s_ref_parents), 0, SPEAR320_CONTROL_REG,
-			I2S_REF_PCLK_SHIFT, I2S_REF_PCLK_MASK, 0, &_lock);
+			ARRAY_SIZE(i2s_ref_parents), CLK_SET_RATE_PARENT,
+			SPEAR320_CONTROL_REG, I2S_REF_PCLK_SHIFT,
+			I2S_REF_PCLK_MASK, 0, &_lock);
 	clk_register_clkdev(clk, "i2s_ref_clk", NULL);
 
-	clk = clk_register_fixed_factor(NULL, "i2s_sclk", "i2s_ref_clk", 0, 1,
+	clk = clk_register_fixed_factor(NULL, "i2s_sclk", "i2s_ref_clk",
+			CLK_SET_RATE_PARENT, 1,
 			4);
 	clk_register_clkdev(clk, "i2s_sclk", NULL);
 
+	clk = clk_register_fixed_factor(NULL, "macb1_clk", "ras_apb_clk", 0, 1,
+			1);
+	clk_register_clkdev(clk, "hclk", "aa000000.eth");
+
+	clk = clk_register_fixed_factor(NULL, "macb2_clk", "ras_apb_clk", 0, 1,
+			1);
+	clk_register_clkdev(clk, "hclk", "ab000000.eth");
+
 	clk = clk_register_mux(NULL, "rs485_clk", uartx_parents,
-			ARRAY_SIZE(uartx_parents), 0, SPEAR320_EXT_CTRL_REG,
-			SPEAR320_RS485_PCLK_SHIFT, SPEAR320_UARTX_PCLK_MASK, 0,
-			&_lock);
+			ARRAY_SIZE(uartx_parents), CLK_SET_RATE_PARENT,
+			SPEAR320_EXT_CTRL_REG, SPEAR320_RS485_PCLK_SHIFT,
+			SPEAR320_UARTX_PCLK_MASK, 0, &_lock);
 	clk_register_clkdev(clk, NULL, "a9300000.serial");
 
 	clk = clk_register_mux(NULL, "sdhci_clk", sdhci_parents,
-			ARRAY_SIZE(sdhci_parents), 0, SPEAR320_CONTROL_REG,
-			SDHCI_PCLK_SHIFT, SDHCI_PCLK_MASK, 0, &_lock);
+			ARRAY_SIZE(sdhci_parents), CLK_SET_RATE_PARENT,
+			SPEAR320_CONTROL_REG, SDHCI_PCLK_SHIFT, SDHCI_PCLK_MASK,
+			0, &_lock);
 	clk_register_clkdev(clk, NULL, "70000000.sdhci");
 
 	clk = clk_register_mux(NULL, "smii_pclk", smii0_parents,
@@ -302,49 +323,49 @@
 	clk_register_clkdev(clk, NULL, "smii");
 
 	clk = clk_register_mux(NULL, "uart1_clk", uartx_parents,
-			ARRAY_SIZE(uartx_parents), 0, SPEAR320_CONTROL_REG,
-			UART1_PCLK_SHIFT, UART1_PCLK_MASK, 0, &_lock);
+			ARRAY_SIZE(uartx_parents), CLK_SET_RATE_PARENT,
+			SPEAR320_CONTROL_REG, UART1_PCLK_SHIFT, UART1_PCLK_MASK,
+			0, &_lock);
 	clk_register_clkdev(clk, NULL, "a3000000.serial");
 
 	clk = clk_register_mux(NULL, "uart2_clk", uartx_parents,
-			ARRAY_SIZE(uartx_parents), 0, SPEAR320_EXT_CTRL_REG,
-			SPEAR320_UART2_PCLK_SHIFT, SPEAR320_UARTX_PCLK_MASK, 0,
-			&_lock);
+			ARRAY_SIZE(uartx_parents), CLK_SET_RATE_PARENT,
+			SPEAR320_EXT_CTRL_REG, SPEAR320_UART2_PCLK_SHIFT,
+			SPEAR320_UARTX_PCLK_MASK, 0, &_lock);
 	clk_register_clkdev(clk, NULL, "a4000000.serial");
 
 	clk = clk_register_mux(NULL, "uart3_clk", uartx_parents,
-			ARRAY_SIZE(uartx_parents), 0, SPEAR320_EXT_CTRL_REG,
-			SPEAR320_UART3_PCLK_SHIFT, SPEAR320_UARTX_PCLK_MASK, 0,
-			&_lock);
+			ARRAY_SIZE(uartx_parents), CLK_SET_RATE_PARENT,
+			SPEAR320_EXT_CTRL_REG, SPEAR320_UART3_PCLK_SHIFT,
+			SPEAR320_UARTX_PCLK_MASK, 0, &_lock);
 	clk_register_clkdev(clk, NULL, "a9100000.serial");
 
 	clk = clk_register_mux(NULL, "uart4_clk", uartx_parents,
-			ARRAY_SIZE(uartx_parents), 0, SPEAR320_EXT_CTRL_REG,
-			SPEAR320_UART4_PCLK_SHIFT, SPEAR320_UARTX_PCLK_MASK, 0,
-			&_lock);
+			ARRAY_SIZE(uartx_parents), CLK_SET_RATE_PARENT,
+			SPEAR320_EXT_CTRL_REG, SPEAR320_UART4_PCLK_SHIFT,
+			SPEAR320_UARTX_PCLK_MASK, 0, &_lock);
 	clk_register_clkdev(clk, NULL, "a9200000.serial");
 
 	clk = clk_register_mux(NULL, "uart5_clk", uartx_parents,
-			ARRAY_SIZE(uartx_parents), 0, SPEAR320_EXT_CTRL_REG,
-			SPEAR320_UART5_PCLK_SHIFT, SPEAR320_UARTX_PCLK_MASK, 0,
-			&_lock);
+			ARRAY_SIZE(uartx_parents), CLK_SET_RATE_PARENT,
+			SPEAR320_EXT_CTRL_REG, SPEAR320_UART5_PCLK_SHIFT,
+			SPEAR320_UARTX_PCLK_MASK, 0, &_lock);
 	clk_register_clkdev(clk, NULL, "60000000.serial");
 
 	clk = clk_register_mux(NULL, "uart6_clk", uartx_parents,
-			ARRAY_SIZE(uartx_parents), 0, SPEAR320_EXT_CTRL_REG,
-			SPEAR320_UART6_PCLK_SHIFT, SPEAR320_UARTX_PCLK_MASK, 0,
-			&_lock);
+			ARRAY_SIZE(uartx_parents), CLK_SET_RATE_PARENT,
+			SPEAR320_EXT_CTRL_REG, SPEAR320_UART6_PCLK_SHIFT,
+			SPEAR320_UARTX_PCLK_MASK, 0, &_lock);
 	clk_register_clkdev(clk, NULL, "60100000.serial");
 }
+#else
+static inline void spear320_clk_init(void) { }
 #endif
 
 void __init spear3xx_clk_init(void)
 {
 	struct clk *clk, *clk1;
 
-	clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0);
-	clk_register_clkdev(clk, "apb_pclk", NULL);
-
 	clk = clk_register_fixed_rate(NULL, "osc_32k_clk", NULL, CLK_IS_ROOT,
 			32000);
 	clk_register_clkdev(clk, "osc_32k_clk", NULL);
@@ -380,7 +401,8 @@
 	clk_register_clkdev(clk1, "pll2_clk", NULL);
 
 	/* clock derived from pll1 clk */
-	clk = clk_register_fixed_factor(NULL, "cpu_clk", "pll1_clk", 0, 1, 1);
+	clk = clk_register_fixed_factor(NULL, "cpu_clk", "pll1_clk",
+			CLK_SET_RATE_PARENT, 1, 1);
 	clk_register_clkdev(clk, "cpu_clk", NULL);
 
 	clk = clk_register_divider(NULL, "ahb_clk", "pll1_clk",
@@ -395,12 +417,14 @@
 	clk_register_clkdev(clk1, "uart_syn_gclk", NULL);
 
 	clk = clk_register_mux(NULL, "uart0_mclk", uart0_parents,
-			ARRAY_SIZE(uart0_parents), 0, PERIP_CLK_CFG,
-			UART_CLK_SHIFT, UART_CLK_MASK, 0, &_lock);
+			ARRAY_SIZE(uart0_parents), CLK_SET_RATE_PARENT,
+			PERIP_CLK_CFG, UART_CLK_SHIFT, UART_CLK_MASK, 0,
+			&_lock);
 	clk_register_clkdev(clk, "uart0_mclk", NULL);
 
-	clk = clk_register_gate(NULL, "uart0", "uart0_mclk", 0, PERIP1_CLK_ENB,
-			UART_CLK_ENB, 0, &_lock);
+	clk = clk_register_gate(NULL, "uart0", "uart0_mclk",
+			CLK_SET_RATE_PARENT, PERIP1_CLK_ENB, UART_CLK_ENB, 0,
+			&_lock);
 	clk_register_clkdev(clk, NULL, "d0000000.serial");
 
 	clk = clk_register_aux("firda_syn_clk", "firda_syn_gclk", "pll1_clk", 0,
@@ -410,40 +434,44 @@
 	clk_register_clkdev(clk1, "firda_syn_gclk", NULL);
 
 	clk = clk_register_mux(NULL, "firda_mclk", firda_parents,
-			ARRAY_SIZE(firda_parents), 0, PERIP_CLK_CFG,
-			FIRDA_CLK_SHIFT, FIRDA_CLK_MASK, 0, &_lock);
+			ARRAY_SIZE(firda_parents), CLK_SET_RATE_PARENT,
+			PERIP_CLK_CFG, FIRDA_CLK_SHIFT, FIRDA_CLK_MASK, 0,
+			&_lock);
 	clk_register_clkdev(clk, "firda_mclk", NULL);
 
-	clk = clk_register_gate(NULL, "firda_clk", "firda_mclk", 0,
-			PERIP1_CLK_ENB, FIRDA_CLK_ENB, 0, &_lock);
+	clk = clk_register_gate(NULL, "firda_clk", "firda_mclk",
+			CLK_SET_RATE_PARENT, PERIP1_CLK_ENB, FIRDA_CLK_ENB, 0,
+			&_lock);
 	clk_register_clkdev(clk, NULL, "firda");
 
 	/* gpt clocks */
 	clk_register_gpt("gpt0_syn_clk", "pll1_clk", 0, PRSC0_CLK_CFG, gpt_rtbl,
 			ARRAY_SIZE(gpt_rtbl), &_lock);
 	clk = clk_register_mux(NULL, "gpt0_clk", gpt0_parents,
-			ARRAY_SIZE(gpt0_parents), 0, PERIP_CLK_CFG,
-			GPT0_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock);
+			ARRAY_SIZE(gpt0_parents), CLK_SET_RATE_PARENT,
+			PERIP_CLK_CFG, GPT0_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock);
 	clk_register_clkdev(clk, NULL, "gpt0");
 
 	clk_register_gpt("gpt1_syn_clk", "pll1_clk", 0, PRSC1_CLK_CFG, gpt_rtbl,
 			ARRAY_SIZE(gpt_rtbl), &_lock);
 	clk = clk_register_mux(NULL, "gpt1_mclk", gpt1_parents,
-			ARRAY_SIZE(gpt1_parents), 0, PERIP_CLK_CFG,
-			GPT1_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock);
+			ARRAY_SIZE(gpt1_parents), CLK_SET_RATE_PARENT,
+			PERIP_CLK_CFG, GPT1_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock);
 	clk_register_clkdev(clk, "gpt1_mclk", NULL);
-	clk = clk_register_gate(NULL, "gpt1_clk", "gpt1_mclk", 0,
-			PERIP1_CLK_ENB, GPT1_CLK_ENB, 0, &_lock);
+	clk = clk_register_gate(NULL, "gpt1_clk", "gpt1_mclk",
+			CLK_SET_RATE_PARENT, PERIP1_CLK_ENB, GPT1_CLK_ENB, 0,
+			&_lock);
 	clk_register_clkdev(clk, NULL, "gpt1");
 
 	clk_register_gpt("gpt2_syn_clk", "pll1_clk", 0, PRSC2_CLK_CFG, gpt_rtbl,
 			ARRAY_SIZE(gpt_rtbl), &_lock);
 	clk = clk_register_mux(NULL, "gpt2_mclk", gpt2_parents,
-			ARRAY_SIZE(gpt2_parents), 0, PERIP_CLK_CFG,
-			GPT2_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock);
+			ARRAY_SIZE(gpt2_parents), CLK_SET_RATE_PARENT,
+			PERIP_CLK_CFG, GPT2_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock);
 	clk_register_clkdev(clk, "gpt2_mclk", NULL);
-	clk = clk_register_gate(NULL, "gpt2_clk", "gpt2_mclk", 0,
-			PERIP1_CLK_ENB, GPT2_CLK_ENB, 0, &_lock);
+	clk = clk_register_gate(NULL, "gpt2_clk", "gpt2_mclk",
+			CLK_SET_RATE_PARENT, PERIP1_CLK_ENB, GPT2_CLK_ENB, 0,
+			&_lock);
 	clk_register_clkdev(clk, NULL, "gpt2");
 
 	/* general synths clocks */
@@ -480,7 +508,9 @@
 	/* clock derived from pll3 clk */
 	clk = clk_register_gate(NULL, "usbh_clk", "pll3_clk", 0, PERIP1_CLK_ENB,
 			USBH_CLK_ENB, 0, &_lock);
-	clk_register_clkdev(clk, "usbh_clk", NULL);
+	clk_register_clkdev(clk, NULL, "e1800000.ehci");
+	clk_register_clkdev(clk, NULL, "e1900000.ohci");
+	clk_register_clkdev(clk, NULL, "e2100000.ohci");
 
 	clk = clk_register_fixed_factor(NULL, "usbh.0_clk", "usbh_clk", 0, 1,
 			1);
@@ -492,7 +522,7 @@
 
 	clk = clk_register_gate(NULL, "usbd_clk", "pll3_clk", 0, PERIP1_CLK_ENB,
 			USBD_CLK_ENB, 0, &_lock);
-	clk_register_clkdev(clk, NULL, "designware_udc");
+	clk_register_clkdev(clk, NULL, "e1100000.usbd");
 
 	/* clock derived from ahb clk */
 	clk = clk_register_fixed_factor(NULL, "ahbmult2_clk", "ahb_clk", 0, 2,
@@ -540,7 +570,7 @@
 	/* clock derived from apb clk */
 	clk = clk_register_gate(NULL, "adc_clk", "apb_clk", 0, PERIP1_CLK_ENB,
 			ADC_CLK_ENB, 0, &_lock);
-	clk_register_clkdev(clk, NULL, "adc");
+	clk_register_clkdev(clk, NULL, "d0080000.adc");
 
 	clk = clk_register_gate(NULL, "gpio0_clk", "apb_clk", 0, PERIP1_CLK_ENB,
 			GPIO_CLK_ENB, 0, &_lock);
@@ -579,20 +609,24 @@
 			RAS_CLK_ENB, RAS_48M_CLK_ENB, 0, &_lock);
 	clk_register_clkdev(clk, "ras_pll3_clk", NULL);
 
-	clk = clk_register_gate(NULL, "ras_syn0_gclk", "gen0_syn_gclk", 0,
-			RAS_CLK_ENB, RAS_SYNT0_CLK_ENB, 0, &_lock);
+	clk = clk_register_gate(NULL, "ras_syn0_gclk", "gen0_syn_gclk",
+			CLK_SET_RATE_PARENT, RAS_CLK_ENB, RAS_SYNT0_CLK_ENB, 0,
+			&_lock);
 	clk_register_clkdev(clk, "ras_syn0_gclk", NULL);
 
-	clk = clk_register_gate(NULL, "ras_syn1_gclk", "gen1_syn_gclk", 0,
-			RAS_CLK_ENB, RAS_SYNT1_CLK_ENB, 0, &_lock);
+	clk = clk_register_gate(NULL, "ras_syn1_gclk", "gen1_syn_gclk",
+			CLK_SET_RATE_PARENT, RAS_CLK_ENB, RAS_SYNT1_CLK_ENB, 0,
+			&_lock);
 	clk_register_clkdev(clk, "ras_syn1_gclk", NULL);
 
-	clk = clk_register_gate(NULL, "ras_syn2_gclk", "gen2_syn_gclk", 0,
-			RAS_CLK_ENB, RAS_SYNT2_CLK_ENB, 0, &_lock);
+	clk = clk_register_gate(NULL, "ras_syn2_gclk", "gen2_syn_gclk",
+			CLK_SET_RATE_PARENT, RAS_CLK_ENB, RAS_SYNT2_CLK_ENB, 0,
+			&_lock);
 	clk_register_clkdev(clk, "ras_syn2_gclk", NULL);
 
-	clk = clk_register_gate(NULL, "ras_syn3_gclk", "gen3_syn_gclk", 0,
-			RAS_CLK_ENB, RAS_SYNT3_CLK_ENB, 0, &_lock);
+	clk = clk_register_gate(NULL, "ras_syn3_gclk", "gen3_syn_gclk",
+			CLK_SET_RATE_PARENT, RAS_CLK_ENB, RAS_SYNT3_CLK_ENB, 0,
+			&_lock);
 	clk_register_clkdev(clk, "ras_syn3_gclk", NULL);
 
 	if (of_machine_is_compatible("st,spear300"))
diff --git a/drivers/clk/spear/spear6xx_clock.c b/drivers/clk/spear/spear6xx_clock.c
index a98d086..e862a33 100644
--- a/drivers/clk/spear/spear6xx_clock.c
+++ b/drivers/clk/spear/spear6xx_clock.c
@@ -92,6 +92,7 @@
 /* aux rate configuration table, in ascending order of rates */
 static struct aux_rate_tbl aux_rtbl[] = {
 	/* For PLL1 = 332 MHz */
+	{.xscale = 2, .yscale = 27, .eq = 0}, /* 12.296 MHz */
 	{.xscale = 2, .yscale = 8, .eq = 0}, /* 41.5 MHz */
 	{.xscale = 2, .yscale = 4, .eq = 0}, /* 83 MHz */
 	{.xscale = 1, .yscale = 2, .eq = 1}, /* 166 MHz */
@@ -118,9 +119,6 @@
 {
 	struct clk *clk, *clk1;
 
-	clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0);
-	clk_register_clkdev(clk, "apb_pclk", NULL);
-
 	clk = clk_register_fixed_rate(NULL, "osc_32k_clk", NULL, CLK_IS_ROOT,
 			32000);
 	clk_register_clkdev(clk, "osc_32k_clk", NULL);
@@ -156,7 +154,8 @@
 	clk_register_clkdev(clk, NULL, "wdt");
 
 	/* clock derived from pll1 clk */
-	clk = clk_register_fixed_factor(NULL, "cpu_clk", "pll1_clk", 0, 1, 1);
+	clk = clk_register_fixed_factor(NULL, "cpu_clk", "pll1_clk",
+			CLK_SET_RATE_PARENT, 1, 1);
 	clk_register_clkdev(clk, "cpu_clk", NULL);
 
 	clk = clk_register_divider(NULL, "ahb_clk", "pll1_clk",
@@ -261,11 +260,13 @@
 	/* clock derived from pll3 clk */
 	clk = clk_register_gate(NULL, "usbh0_clk", "pll3_clk", 0,
 			PERIP1_CLK_ENB, USBH0_CLK_ENB, 0, &_lock);
-	clk_register_clkdev(clk, NULL, "usbh.0_clk");
+	clk_register_clkdev(clk, NULL, "e1800000.ehci");
+	clk_register_clkdev(clk, NULL, "e1900000.ohci");
 
 	clk = clk_register_gate(NULL, "usbh1_clk", "pll3_clk", 0,
 			PERIP1_CLK_ENB, USBH1_CLK_ENB, 0, &_lock);
-	clk_register_clkdev(clk, NULL, "usbh.1_clk");
+	clk_register_clkdev(clk, NULL, "e2000000.ehci");
+	clk_register_clkdev(clk, NULL, "e2100000.ohci");
 
 	clk = clk_register_gate(NULL, "usbd_clk", "pll3_clk", 0, PERIP1_CLK_ENB,
 			USBD_CLK_ENB, 0, &_lock);
diff --git a/drivers/clk/ux500/Makefile b/drivers/clk/ux500/Makefile
index 858fbfe..bcc0c11 100644
--- a/drivers/clk/ux500/Makefile
+++ b/drivers/clk/ux500/Makefile
@@ -10,3 +10,6 @@
 obj-y += u8500_clk.o
 obj-y += u9540_clk.o
 obj-y += u8540_clk.o
+
+# ABX500 clock driver
+obj-y += abx500-clk.o
diff --git a/drivers/clk/ux500/abx500-clk.c b/drivers/clk/ux500/abx500-clk.c
new file mode 100644
index 0000000..e27c523
--- /dev/null
+++ b/drivers/clk/ux500/abx500-clk.c
@@ -0,0 +1,73 @@
+/*
+ * abx500 clock implementation for ux500 platform.
+ *
+ * Copyright (C) 2012 ST-Ericsson SA
+ * Author: Ulf Hansson <ulf.hansson@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/abx500/ab8500.h>
+
+/* TODO: Add clock implementations here */
+
+
+/* Clock definitions for ab8500 */
+static int ab8500_reg_clks(struct device *dev)
+{
+	return 0;
+}
+
+/* Clock definitions for ab8540 */
+static int ab8540_reg_clks(struct device *dev)
+{
+	return 0;
+}
+
+/* Clock definitions for ab9540 */
+static int ab9540_reg_clks(struct device *dev)
+{
+	return 0;
+}
+
+static int __devinit abx500_clk_probe(struct platform_device *pdev)
+{
+	struct ab8500 *parent = dev_get_drvdata(pdev->dev.parent);
+	int ret;
+
+	if (is_ab8500(parent) || is_ab8505(parent)) {
+		ret = ab8500_reg_clks(&pdev->dev);
+	} else if (is_ab8540(parent)) {
+		ret = ab8540_reg_clks(&pdev->dev);
+	} else if (is_ab9540(parent)) {
+		ret = ab9540_reg_clks(&pdev->dev);
+	} else {
+		dev_err(&pdev->dev, "non supported plf id\n");
+		return -ENODEV;
+	}
+
+	return ret;
+}
+
+static struct platform_driver abx500_clk_driver = {
+	.driver = {
+		.name = "abx500-clk",
+		.owner = THIS_MODULE,
+	},
+	.probe	= abx500_clk_probe,
+};
+
+static int __init abx500_clk_init(void)
+{
+	return platform_driver_register(&abx500_clk_driver);
+}
+
+arch_initcall(abx500_clk_init);
+
+MODULE_AUTHOR("Ulf Hansson <ulf.hansson@linaro.org");
+MODULE_DESCRIPTION("ABX500 clk driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/clk/ux500/clk-prcmu.c b/drivers/clk/ux500/clk-prcmu.c
index 930cdfe..74faa7e 100644
--- a/drivers/clk/ux500/clk-prcmu.c
+++ b/drivers/clk/ux500/clk-prcmu.c
@@ -133,6 +133,40 @@
 		hw->init->name);
 }
 
+static int clk_prcmu_opp_volt_prepare(struct clk_hw *hw)
+{
+	int err;
+	struct clk_prcmu *clk = to_clk_prcmu(hw);
+
+	err = prcmu_request_ape_opp_100_voltage(true);
+	if (err) {
+		pr_err("clk_prcmu: %s failed to request APE OPP VOLT for %s.\n",
+			__func__, hw->init->name);
+		return err;
+	}
+
+	err = prcmu_request_clock(clk->cg_sel, true);
+	if (err)
+		prcmu_request_ape_opp_100_voltage(false);
+
+	return err;
+}
+
+static void clk_prcmu_opp_volt_unprepare(struct clk_hw *hw)
+{
+	struct clk_prcmu *clk = to_clk_prcmu(hw);
+
+	if (prcmu_request_clock(clk->cg_sel, false))
+		goto out_error;
+	if (prcmu_request_ape_opp_100_voltage(false))
+		goto out_error;
+	return;
+
+out_error:
+	pr_err("clk_prcmu: %s failed to disable %s.\n", __func__,
+		hw->init->name);
+}
+
 static struct clk_ops clk_prcmu_scalable_ops = {
 	.prepare = clk_prcmu_prepare,
 	.unprepare = clk_prcmu_unprepare,
@@ -153,6 +187,13 @@
 	.recalc_rate = clk_prcmu_recalc_rate,
 };
 
+static struct clk_ops clk_prcmu_scalable_rate_ops = {
+	.is_enabled = clk_prcmu_is_enabled,
+	.recalc_rate = clk_prcmu_recalc_rate,
+	.round_rate = clk_prcmu_round_rate,
+	.set_rate = clk_prcmu_set_rate,
+};
+
 static struct clk_ops clk_prcmu_rate_ops = {
 	.is_enabled = clk_prcmu_is_enabled,
 	.recalc_rate = clk_prcmu_recalc_rate,
@@ -167,6 +208,17 @@
 	.recalc_rate = clk_prcmu_recalc_rate,
 };
 
+static struct clk_ops clk_prcmu_opp_volt_scalable_ops = {
+	.prepare = clk_prcmu_opp_volt_prepare,
+	.unprepare = clk_prcmu_opp_volt_unprepare,
+	.enable = clk_prcmu_enable,
+	.disable = clk_prcmu_disable,
+	.is_enabled = clk_prcmu_is_enabled,
+	.recalc_rate = clk_prcmu_recalc_rate,
+	.round_rate = clk_prcmu_round_rate,
+	.set_rate = clk_prcmu_set_rate,
+};
+
 static struct clk *clk_reg_prcmu(const char *name,
 				 const char *parent_name,
 				 u8 cg_sel,
@@ -233,6 +285,16 @@
 			&clk_prcmu_gate_ops);
 }
 
+struct clk *clk_reg_prcmu_scalable_rate(const char *name,
+					const char *parent_name,
+					u8 cg_sel,
+					unsigned long rate,
+					unsigned long flags)
+{
+	return clk_reg_prcmu(name, parent_name, cg_sel, rate, flags,
+			&clk_prcmu_scalable_rate_ops);
+}
+
 struct clk *clk_reg_prcmu_rate(const char *name,
 			       const char *parent_name,
 			       u8 cg_sel,
@@ -250,3 +312,13 @@
 	return clk_reg_prcmu(name, parent_name, cg_sel, 0, flags,
 			&clk_prcmu_opp_gate_ops);
 }
+
+struct clk *clk_reg_prcmu_opp_volt_scalable(const char *name,
+					    const char *parent_name,
+					    u8 cg_sel,
+					    unsigned long rate,
+					    unsigned long flags)
+{
+	return clk_reg_prcmu(name, parent_name, cg_sel, rate, flags,
+			&clk_prcmu_opp_volt_scalable_ops);
+}
diff --git a/drivers/clk/ux500/clk.h b/drivers/clk/ux500/clk.h
index 836d7d1..c3e4491 100644
--- a/drivers/clk/ux500/clk.h
+++ b/drivers/clk/ux500/clk.h
@@ -35,6 +35,12 @@
 			       u8 cg_sel,
 			       unsigned long flags);
 
+struct clk *clk_reg_prcmu_scalable_rate(const char *name,
+					const char *parent_name,
+					u8 cg_sel,
+					unsigned long rate,
+					unsigned long flags);
+
 struct clk *clk_reg_prcmu_rate(const char *name,
 			       const char *parent_name,
 			       u8 cg_sel,
@@ -45,4 +51,10 @@
 				   u8 cg_sel,
 				   unsigned long flags);
 
+struct clk *clk_reg_prcmu_opp_volt_scalable(const char *name,
+					    const char *parent_name,
+					    u8 cg_sel,
+					    unsigned long rate,
+					    unsigned long flags);
+
 #endif /* __UX500_CLK_H */
diff --git a/drivers/clk/ux500/u8500_clk.c b/drivers/clk/ux500/u8500_clk.c
index ca4a25e..7d0e025 100644
--- a/drivers/clk/ux500/u8500_clk.c
+++ b/drivers/clk/ux500/u8500_clk.c
@@ -40,7 +40,7 @@
 				CLK_IS_ROOT|CLK_IGNORE_UNUSED,
 				32768);
 	clk_register_clkdev(clk, "clk32k", NULL);
-	clk_register_clkdev(clk, NULL, "rtc-pl031");
+	clk_register_clkdev(clk, "apb_pclk", "rtc-pl031");
 
 	/* PRCMU clocks */
 	fw_version = prcmu_get_fw_version();
@@ -170,10 +170,11 @@
 	clk_register_clkdev(clk, NULL, "mtu0");
 	clk_register_clkdev(clk, NULL, "mtu1");
 
-	clk = clk_reg_prcmu_gate("sdmmcclk", NULL, PRCMU_SDMMCCLK, CLK_IS_ROOT);
+	clk = clk_reg_prcmu_opp_volt_scalable("sdmmcclk", NULL, PRCMU_SDMMCCLK,
+					100000000,
+					CLK_IS_ROOT|CLK_SET_RATE_GATE);
 	clk_register_clkdev(clk, NULL, "sdmmc");
 
-
 	clk = clk_reg_prcmu_scalable("dsi_pll", "hdmiclk",
 				PRCMU_PLLDSI, 0, CLK_SET_RATE_GATE);
 	clk_register_clkdev(clk, "dsihs2", "mcde");
@@ -205,16 +206,18 @@
 	clk_register_clkdev(clk, "dsilp2", "dsilink.2");
 	clk_register_clkdev(clk, "dsilp2", "mcde");
 
-	clk = clk_reg_prcmu_rate("smp_twd", NULL, PRCMU_ARMSS,
-				CLK_IS_ROOT|CLK_GET_RATE_NOCACHE|
-				CLK_IGNORE_UNUSED);
+	clk = clk_reg_prcmu_scalable_rate("armss", NULL,
+				PRCMU_ARMSS, 0, CLK_IS_ROOT|CLK_IGNORE_UNUSED);
+	clk_register_clkdev(clk, "armss", NULL);
+
+	clk = clk_register_fixed_factor(NULL, "smp_twd", "armss",
+				CLK_IGNORE_UNUSED, 1, 2);
 	clk_register_clkdev(clk, NULL, "smp_twd");
 
 	/*
 	 * FIXME: Add special handled PRCMU clocks here:
-	 * 1. clk_arm, use PRCMU_ARMCLK.
-	 * 2. clkout0yuv, use PRCMU as parent + need regulator + pinctrl.
-	 * 3. ab9540_clkout1yuv, see clkout0yuv
+	 * 1. clkout0yuv, use PRCMU as parent + need regulator + pinctrl.
+	 * 2. ab9540_clkout1yuv, see clkout0yuv
 	 */
 
 	/* PRCC P-clocks */
@@ -228,10 +231,17 @@
 
 	clk = clk_reg_prcc_pclk("p1_pclk2", "per1clk", U8500_CLKRST1_BASE,
 				BIT(2), 0);
+	clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.1");
+
 	clk = clk_reg_prcc_pclk("p1_pclk3", "per1clk", U8500_CLKRST1_BASE,
 				BIT(3), 0);
+	clk_register_clkdev(clk, "apb_pclk", "msp0");
+	clk_register_clkdev(clk, "apb_pclk", "ux500-msp-i2s.0");
+
 	clk = clk_reg_prcc_pclk("p1_pclk4", "per1clk", U8500_CLKRST1_BASE,
 				BIT(4), 0);
+	clk_register_clkdev(clk, "apb_pclk", "msp1");
+	clk_register_clkdev(clk, "apb_pclk", "ux500-msp-i2s.1");
 
 	clk = clk_reg_prcc_pclk("p1_pclk5", "per1clk", U8500_CLKRST1_BASE,
 				BIT(5), 0);
@@ -239,6 +249,7 @@
 
 	clk = clk_reg_prcc_pclk("p1_pclk6", "per1clk", U8500_CLKRST1_BASE,
 				BIT(6), 0);
+	clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.2");
 
 	clk = clk_reg_prcc_pclk("p1_pclk7", "per1clk", U8500_CLKRST1_BASE,
 				BIT(7), 0);
@@ -246,6 +257,7 @@
 
 	clk = clk_reg_prcc_pclk("p1_pclk8", "per1clk", U8500_CLKRST1_BASE,
 				BIT(8), 0);
+	clk_register_clkdev(clk, "apb_pclk", "slimbus0");
 
 	clk = clk_reg_prcc_pclk("p1_pclk9", "per1clk", U8500_CLKRST1_BASE,
 				BIT(9), 0);
@@ -255,11 +267,16 @@
 
 	clk = clk_reg_prcc_pclk("p1_pclk10", "per1clk", U8500_CLKRST1_BASE,
 				BIT(10), 0);
+	clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.4");
+
 	clk = clk_reg_prcc_pclk("p1_pclk11", "per1clk", U8500_CLKRST1_BASE,
 				BIT(11), 0);
+	clk_register_clkdev(clk, "apb_pclk", "msp3");
+	clk_register_clkdev(clk, "apb_pclk", "ux500-msp-i2s.3");
 
 	clk = clk_reg_prcc_pclk("p2_pclk0", "per2clk", U8500_CLKRST2_BASE,
 				BIT(0), 0);
+	clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.3");
 
 	clk = clk_reg_prcc_pclk("p2_pclk1", "per2clk", U8500_CLKRST2_BASE,
 				BIT(1), 0);
@@ -279,12 +296,13 @@
 
 	clk = clk_reg_prcc_pclk("p2_pclk5", "per2clk", U8500_CLKRST2_BASE,
 				BIT(5), 0);
+	clk_register_clkdev(clk, "apb_pclk", "msp2");
+	clk_register_clkdev(clk, "apb_pclk", "ux500-msp-i2s.2");
 
 	clk = clk_reg_prcc_pclk("p2_pclk6", "per2clk", U8500_CLKRST2_BASE,
 				BIT(6), 0);
 	clk_register_clkdev(clk, "apb_pclk", "sdi1");
 
-
 	clk = clk_reg_prcc_pclk("p2_pclk7", "per2clk", U8500_CLKRST2_BASE,
 				BIT(7), 0);
 	clk_register_clkdev(clk, "apb_pclk", "sdi3");
@@ -308,7 +326,7 @@
 	clk_register_clkdev(clk, NULL, "gpioblock1");
 
 	clk = clk_reg_prcc_pclk("p2_pclk12", "per2clk", U8500_CLKRST2_BASE,
-				BIT(11), 0);
+				BIT(12), 0);
 
 	clk = clk_reg_prcc_pclk("p3_pclk0", "per3clk", U8500_CLKRST3_BASE,
 				BIT(0), 0);
@@ -316,10 +334,15 @@
 
 	clk = clk_reg_prcc_pclk("p3_pclk1", "per3clk", U8500_CLKRST3_BASE,
 				BIT(1), 0);
+	clk_register_clkdev(clk, "apb_pclk", "ssp0");
+
 	clk = clk_reg_prcc_pclk("p3_pclk2", "per3clk", U8500_CLKRST3_BASE,
 				BIT(2), 0);
+	clk_register_clkdev(clk, "apb_pclk", "ssp1");
+
 	clk = clk_reg_prcc_pclk("p3_pclk3", "per3clk", U8500_CLKRST3_BASE,
 				BIT(3), 0);
+	clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.0");
 
 	clk = clk_reg_prcc_pclk("p3_pclk4", "per3clk", U8500_CLKRST3_BASE,
 				BIT(4), 0);
@@ -327,6 +350,8 @@
 
 	clk = clk_reg_prcc_pclk("p3_pclk5", "per3clk", U8500_CLKRST3_BASE,
 				BIT(5), 0);
+	clk_register_clkdev(clk, "apb_pclk", "ske");
+	clk_register_clkdev(clk, "apb_pclk", "nmk-ske-keypad");
 
 	clk = clk_reg_prcc_pclk("p3_pclk6", "per3clk", U8500_CLKRST3_BASE,
 				BIT(6), 0);
@@ -355,6 +380,7 @@
 
 	clk = clk_reg_prcc_pclk("p6_pclk0", "per6clk", U8500_CLKRST6_BASE,
 				BIT(0), 0);
+	clk_register_clkdev(clk, "apb_pclk", "rng");
 
 	clk = clk_reg_prcc_pclk("p6_pclk1", "per6clk", U8500_CLKRST6_BASE,
 				BIT(1), 0);
@@ -401,10 +427,17 @@
 
 	clk = clk_reg_prcc_kclk("p1_i2c1_kclk", "i2cclk",
 			U8500_CLKRST1_BASE, BIT(2), CLK_SET_RATE_GATE);
+	clk_register_clkdev(clk, NULL, "nmk-i2c.1");
+
 	clk = clk_reg_prcc_kclk("p1_msp0_kclk", "msp02clk",
 			U8500_CLKRST1_BASE, BIT(3), CLK_SET_RATE_GATE);
+	clk_register_clkdev(clk, NULL, "msp0");
+	clk_register_clkdev(clk, NULL, "ux500-msp-i2s.0");
+
 	clk = clk_reg_prcc_kclk("p1_msp1_kclk", "msp1clk",
 			U8500_CLKRST1_BASE, BIT(4), CLK_SET_RATE_GATE);
+	clk_register_clkdev(clk, NULL, "msp1");
+	clk_register_clkdev(clk, NULL, "ux500-msp-i2s.1");
 
 	clk = clk_reg_prcc_kclk("p1_sdi0_kclk", "sdmmcclk",
 			U8500_CLKRST1_BASE, BIT(5), CLK_SET_RATE_GATE);
@@ -412,17 +445,25 @@
 
 	clk = clk_reg_prcc_kclk("p1_i2c2_kclk", "i2cclk",
 			U8500_CLKRST1_BASE, BIT(6), CLK_SET_RATE_GATE);
+	clk_register_clkdev(clk, NULL, "nmk-i2c.2");
+
 	clk = clk_reg_prcc_kclk("p1_slimbus0_kclk", "slimclk",
-			U8500_CLKRST1_BASE, BIT(3), CLK_SET_RATE_GATE);
-	/* FIXME: Redefinition of BIT(3). */
+			U8500_CLKRST1_BASE, BIT(8), CLK_SET_RATE_GATE);
+	clk_register_clkdev(clk, NULL, "slimbus0");
+
 	clk = clk_reg_prcc_kclk("p1_i2c4_kclk", "i2cclk",
 			U8500_CLKRST1_BASE, BIT(9), CLK_SET_RATE_GATE);
+	clk_register_clkdev(clk, NULL, "nmk-i2c.4");
+
 	clk = clk_reg_prcc_kclk("p1_msp3_kclk", "msp1clk",
 			U8500_CLKRST1_BASE, BIT(10), CLK_SET_RATE_GATE);
+	clk_register_clkdev(clk, NULL, "msp3");
+	clk_register_clkdev(clk, NULL, "ux500-msp-i2s.3");
 
 	/* Periph2 */
 	clk = clk_reg_prcc_kclk("p2_i2c3_kclk", "i2cclk",
 			U8500_CLKRST2_BASE, BIT(0), CLK_SET_RATE_GATE);
+	clk_register_clkdev(clk, NULL, "nmk-i2c.3");
 
 	clk = clk_reg_prcc_kclk("p2_sdi4_kclk", "sdmmcclk",
 			U8500_CLKRST2_BASE, BIT(2), CLK_SET_RATE_GATE);
@@ -430,6 +471,8 @@
 
 	clk = clk_reg_prcc_kclk("p2_msp2_kclk", "msp02clk",
 			U8500_CLKRST2_BASE, BIT(3), CLK_SET_RATE_GATE);
+	clk_register_clkdev(clk, NULL, "msp2");
+	clk_register_clkdev(clk, NULL, "ux500-msp-i2s.2");
 
 	clk = clk_reg_prcc_kclk("p2_sdi1_kclk", "sdmmcclk",
 			U8500_CLKRST2_BASE, BIT(4), CLK_SET_RATE_GATE);
@@ -450,10 +493,15 @@
 	/* Periph3 */
 	clk = clk_reg_prcc_kclk("p3_ssp0_kclk", "sspclk",
 			U8500_CLKRST3_BASE, BIT(1), CLK_SET_RATE_GATE);
+	clk_register_clkdev(clk, NULL, "ssp0");
+
 	clk = clk_reg_prcc_kclk("p3_ssp1_kclk", "sspclk",
 			U8500_CLKRST3_BASE, BIT(2), CLK_SET_RATE_GATE);
+	clk_register_clkdev(clk, NULL, "ssp1");
+
 	clk = clk_reg_prcc_kclk("p3_i2c0_kclk", "i2cclk",
 			U8500_CLKRST3_BASE, BIT(3), CLK_SET_RATE_GATE);
+	clk_register_clkdev(clk, NULL, "nmk-i2c.0");
 
 	clk = clk_reg_prcc_kclk("p3_sdi2_kclk", "sdmmcclk",
 			U8500_CLKRST3_BASE, BIT(4), CLK_SET_RATE_GATE);
@@ -461,6 +509,8 @@
 
 	clk = clk_reg_prcc_kclk("p3_ske_kclk", "rtc32k",
 			U8500_CLKRST3_BASE, BIT(5), CLK_SET_RATE_GATE);
+	clk_register_clkdev(clk, NULL, "ske");
+	clk_register_clkdev(clk, NULL, "nmk-ske-keypad");
 
 	clk = clk_reg_prcc_kclk("p3_uart2_kclk", "uartclk",
 			U8500_CLKRST3_BASE, BIT(6), CLK_SET_RATE_GATE);
@@ -473,5 +523,5 @@
 	/* Periph6 */
 	clk = clk_reg_prcc_kclk("p3_rng_kclk", "rngclk",
 			U8500_CLKRST6_BASE, BIT(0), CLK_SET_RATE_GATE);
-
+	clk_register_clkdev(clk, NULL, "rng");
 }
diff --git a/drivers/clk/versatile/Makefile b/drivers/clk/versatile/Makefile
index c0a0f64..ec3b88f 100644
--- a/drivers/clk/versatile/Makefile
+++ b/drivers/clk/versatile/Makefile
@@ -1,4 +1,7 @@
 # Makefile for Versatile-specific clocks
 obj-$(CONFIG_ICST)		+= clk-icst.o
 obj-$(CONFIG_ARCH_INTEGRATOR)	+= clk-integrator.o
+obj-$(CONFIG_INTEGRATOR_IMPD1)	+= clk-impd1.o
 obj-$(CONFIG_ARCH_REALVIEW)	+= clk-realview.o
+obj-$(CONFIG_ARCH_VEXPRESS)	+= clk-vexpress.o
+obj-$(CONFIG_VEXPRESS_CONFIG)	+= clk-vexpress-osc.o
diff --git a/drivers/clk/versatile/clk-icst.c b/drivers/clk/versatile/clk-icst.c
index f555b50..67ccf4a 100644
--- a/drivers/clk/versatile/clk-icst.c
+++ b/drivers/clk/versatile/clk-icst.c
@@ -3,6 +3,12 @@
  * We wrap the custom interface from <asm/hardware/icst.h> into the generic
  * clock framework.
  *
+ * Copyright (C) 2012 Linus Walleij
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
  * TODO: when all ARM reference designs are migrated to generic clocks, the
  * ICST clock code from the ARM tree should probably be merged into this
  * file.
@@ -11,33 +17,74 @@
 #include <linux/clkdev.h>
 #include <linux/err.h>
 #include <linux/clk-provider.h>
+#include <linux/io.h>
 
 #include "clk-icst.h"
 
 /**
  * struct clk_icst - ICST VCO clock wrapper
  * @hw: corresponding clock hardware entry
+ * @vcoreg: VCO register address
+ * @lockreg: VCO lock register address
  * @params: parameters for this ICST instance
  * @rate: current rate
- * @setvco: function to commit ICST settings to hardware
  */
 struct clk_icst {
 	struct clk_hw hw;
+	void __iomem *vcoreg;
+	void __iomem *lockreg;
 	const struct icst_params *params;
 	unsigned long rate;
-	struct icst_vco (*getvco)(void);
-	void (*setvco)(struct icst_vco);
 };
 
 #define to_icst(_hw) container_of(_hw, struct clk_icst, hw)
 
+/**
+ * vco_get() - get ICST VCO settings from a certain register
+ * @vcoreg: register containing the VCO settings
+ */
+static struct icst_vco vco_get(void __iomem *vcoreg)
+{
+	u32 val;
+	struct icst_vco vco;
+
+	val = readl(vcoreg);
+	vco.v = val & 0x1ff;
+	vco.r = (val >> 9) & 0x7f;
+	vco.s = (val >> 16) & 03;
+	return vco;
+}
+
+/**
+ * vco_set() - commit changes to an ICST VCO
+ * @locreg: register to poke to unlock the VCO for writing
+ * @vcoreg: register containing the VCO settings
+ * @vco: ICST VCO parameters to commit
+ */
+static void vco_set(void __iomem *lockreg,
+			void __iomem *vcoreg,
+			struct icst_vco vco)
+{
+	u32 val;
+
+	val = readl(vcoreg) & ~0x7ffff;
+	val |= vco.v | (vco.r << 9) | (vco.s << 16);
+
+	/* This magic unlocks the VCO so it can be controlled */
+	writel(0xa05f, lockreg);
+	writel(val, vcoreg);
+	/* This locks the VCO again */
+	writel(0, lockreg);
+}
+
+
 static unsigned long icst_recalc_rate(struct clk_hw *hw,
 				      unsigned long parent_rate)
 {
 	struct clk_icst *icst = to_icst(hw);
 	struct icst_vco vco;
 
-	vco = icst->getvco();
+	vco = vco_get(icst->vcoreg);
 	icst->rate = icst_hz(icst->params, vco);
 	return icst->rate;
 }
@@ -60,7 +107,7 @@
 
 	vco = icst_hz_to_vco(icst->params, rate);
 	icst->rate = icst_hz(icst->params, vco);
-	icst->setvco(vco);
+	vco_set(icst->vcoreg, icst->lockreg, vco);
 	return 0;
 }
 
@@ -70,8 +117,9 @@
 	.set_rate = icst_set_rate,
 };
 
-struct clk * __init icst_clk_register(struct device *dev,
-				      const struct clk_icst_desc *desc)
+struct clk *icst_clk_register(struct device *dev,
+			const struct clk_icst_desc *desc,
+			void __iomem *base)
 {
 	struct clk *clk;
 	struct clk_icst *icst;
@@ -89,8 +137,8 @@
 	init.num_parents = 0;
 	icst->hw.init = &init;
 	icst->params = desc->params;
-	icst->getvco = desc->getvco;
-	icst->setvco = desc->setvco;
+	icst->vcoreg = base + desc->vco_offset;
+	icst->lockreg = base + desc->lock_offset;
 
 	clk = clk_register(dev, &icst->hw);
 	if (IS_ERR(clk))
diff --git a/drivers/clk/versatile/clk-icst.h b/drivers/clk/versatile/clk-icst.h
index 71b4c56..dad51b6 100644
--- a/drivers/clk/versatile/clk-icst.h
+++ b/drivers/clk/versatile/clk-icst.h
@@ -1,10 +1,18 @@
 #include <asm/hardware/icst.h>
 
+/**
+ * struct clk_icst_desc - descriptor for the ICST VCO
+ * @params: ICST parameters
+ * @vco_offset: offset to the ICST VCO from the provided memory base
+ * @lock_offset: offset to the ICST VCO locking register from the provided
+ *	memory base
+ */
 struct clk_icst_desc {
 	const struct icst_params *params;
-	struct icst_vco (*getvco)(void);
-	void (*setvco)(struct icst_vco);
+	u32 vco_offset;
+	u32 lock_offset;
 };
 
 struct clk *icst_clk_register(struct device *dev,
-			      const struct clk_icst_desc *desc);
+			      const struct clk_icst_desc *desc,
+			      void __iomem *base);
diff --git a/drivers/clk/versatile/clk-impd1.c b/drivers/clk/versatile/clk-impd1.c
new file mode 100644
index 0000000..369139a
--- /dev/null
+++ b/drivers/clk/versatile/clk-impd1.c
@@ -0,0 +1,97 @@
+/*
+ * Clock driver for the ARM Integrator/IM-PD1 board
+ * Copyright (C) 2012 Linus Walleij
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/clk-provider.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/platform_data/clk-integrator.h>
+
+#include <mach/impd1.h>
+
+#include "clk-icst.h"
+
+struct impd1_clk {
+	struct clk *vcoclk;
+	struct clk *uartclk;
+	struct clk_lookup *clks[3];
+};
+
+static struct impd1_clk impd1_clks[4];
+
+/*
+ * There are two VCO's on the IM-PD1 but only one is used by the
+ * kernel, that is why we are only implementing the control of
+ * IMPD1_OSC1 here.
+ */
+
+static const struct icst_params impd1_vco_params = {
+	.ref		= 24000000,	/* 24 MHz */
+	.vco_max	= ICST525_VCO_MAX_3V,
+	.vco_min	= ICST525_VCO_MIN,
+	.vd_min		= 12,
+	.vd_max		= 519,
+	.rd_min		= 3,
+	.rd_max		= 120,
+	.s2div		= icst525_s2div,
+	.idx2s		= icst525_idx2s,
+};
+
+static const struct clk_icst_desc impd1_icst1_desc = {
+	.params = &impd1_vco_params,
+	.vco_offset = IMPD1_OSC1,
+	.lock_offset = IMPD1_LOCK,
+};
+
+/**
+ * integrator_impd1_clk_init() - set up the integrator clock tree
+ * @base: base address of the logic module (LM)
+ * @id: the ID of this LM
+ */
+void integrator_impd1_clk_init(void __iomem *base, unsigned int id)
+{
+	struct impd1_clk *imc;
+	struct clk *clk;
+	int i;
+
+	if (id > 3) {
+		pr_crit("no more than 4 LMs can be attached\n");
+		return;
+	}
+	imc = &impd1_clks[id];
+
+	clk = icst_clk_register(NULL, &impd1_icst1_desc, base);
+	imc->vcoclk = clk;
+	imc->clks[0] = clkdev_alloc(clk, NULL, "lm%x:01000", id);
+
+	/* UART reference clock */
+	clk = clk_register_fixed_rate(NULL, "uartclk", NULL, CLK_IS_ROOT,
+				14745600);
+	imc->uartclk = clk;
+	imc->clks[1] = clkdev_alloc(clk, NULL, "lm%x:00100", id);
+	imc->clks[2] = clkdev_alloc(clk, NULL, "lm%x:00200", id);
+
+	for (i = 0; i < ARRAY_SIZE(imc->clks); i++)
+		clkdev_add(imc->clks[i]);
+}
+
+void integrator_impd1_clk_exit(unsigned int id)
+{
+	int i;
+	struct impd1_clk *imc;
+
+	if (id > 3)
+		return;
+	imc = &impd1_clks[id];
+
+	for (i = 0; i < ARRAY_SIZE(imc->clks); i++)
+		clkdev_drop(imc->clks[i]);
+	clk_unregister(imc->uartclk);
+	clk_unregister(imc->vcoclk);
+}
diff --git a/drivers/clk/versatile/clk-integrator.c b/drivers/clk/versatile/clk-integrator.c
index a505392..08593b4 100644
--- a/drivers/clk/versatile/clk-integrator.c
+++ b/drivers/clk/versatile/clk-integrator.c
@@ -1,8 +1,16 @@
+/*
+ * Clock driver for the ARM Integrator/AP and Integrator/CP boards
+ * Copyright (C) 2012 Linus Walleij
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/clk-provider.h>
 #include <linux/clk.h>
 #include <linux/clkdev.h>
 #include <linux/err.h>
-#include <linux/io.h>
-#include <linux/clk-provider.h>
+#include <linux/platform_data/clk-integrator.h>
 
 #include <mach/hardware.h>
 #include <mach/platform.h>
@@ -14,42 +22,6 @@
  * Inspired by portions of:
  * plat-versatile/clock.c and plat-versatile/include/plat/clock.h
  */
-#define CM_LOCK		(__io_address(INTEGRATOR_HDR_BASE)+INTEGRATOR_HDR_LOCK_OFFSET)
-#define CM_AUXOSC	(__io_address(INTEGRATOR_HDR_BASE)+0x1c)
-
-/**
- * cp_auxvco_get() - get ICST VCO settings for the Integrator/CP
- * @vco: ICST VCO parameters to update with hardware status
- */
-static struct icst_vco cp_auxvco_get(void)
-{
-	u32 val;
-	struct icst_vco vco;
-
-	val = readl(CM_AUXOSC);
-	vco.v = val & 0x1ff;
-	vco.r = (val >> 9) & 0x7f;
-	vco.s = (val >> 16) & 03;
-	return vco;
-}
-
-/**
- * cp_auxvco_set() - commit changes to Integrator/CP ICST VCO
- * @vco: ICST VCO parameters to commit
- */
-static void cp_auxvco_set(struct icst_vco vco)
-{
-	u32 val;
-
-	val = readl(CM_AUXOSC) & ~0x7ffff;
-	val |= vco.v | (vco.r << 9) | (vco.s << 16);
-
-	/* This magic unlocks the CM VCO so it can be controlled */
-	writel(0xa05f, CM_LOCK);
-	writel(val, CM_AUXOSC);
-	/* This locks the CM again */
-	writel(0, CM_LOCK);
-}
 
 static const struct icst_params cp_auxvco_params = {
 	.ref		= 24000000,
@@ -65,8 +37,8 @@
 
 static const struct clk_icst_desc __initdata cp_icst_desc = {
 	.params = &cp_auxvco_params,
-	.getvco = cp_auxvco_get,
-	.setvco = cp_auxvco_set,
+	.vco_offset = 0x1c,
+	.lock_offset = INTEGRATOR_HDR_LOCK_OFFSET,
 };
 
 /*
@@ -106,6 +78,7 @@
 	clk_register_clkdev(clk, NULL, "sp804");
 
 	/* ICST VCO clock used on the Integrator/CP CLCD */
-	clk = icst_clk_register(NULL, &cp_icst_desc);
+	clk = icst_clk_register(NULL, &cp_icst_desc,
+				__io_address(INTEGRATOR_HDR_BASE));
 	clk_register_clkdev(clk, NULL, "clcd");
 }
diff --git a/drivers/clk/versatile/clk-realview.c b/drivers/clk/versatile/clk-realview.c
index e21a99c..cda07e7 100644
--- a/drivers/clk/versatile/clk-realview.c
+++ b/drivers/clk/versatile/clk-realview.c
@@ -1,3 +1,11 @@
+/*
+ * Clock driver for the ARM RealView boards
+ * Copyright (C) 2012 Linus Walleij
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
 #include <linux/clk.h>
 #include <linux/clkdev.h>
 #include <linux/err.h>
@@ -13,38 +21,6 @@
  * Implementation of the ARM RealView clock trees.
  */
 
-static void __iomem *sys_lock;
-static void __iomem *sys_vcoreg;
-
-/**
- * realview_oscvco_get() - get ICST OSC settings for the RealView
- */
-static struct icst_vco realview_oscvco_get(void)
-{
-	u32 val;
-	struct icst_vco vco;
-
-	val = readl(sys_vcoreg);
-	vco.v = val & 0x1ff;
-	vco.r = (val >> 9) & 0x7f;
-	vco.s = (val >> 16) & 03;
-	return vco;
-}
-
-static void realview_oscvco_set(struct icst_vco vco)
-{
-	u32 val;
-
-	val = readl(sys_vcoreg) & ~0x7ffff;
-	val |= vco.v | (vco.r << 9) | (vco.s << 16);
-
-	/* This magic unlocks the CM VCO so it can be controlled */
-	writel(0xa05f, sys_lock);
-	writel(val, sys_vcoreg);
-	/* This locks the CM again */
-	writel(0, sys_lock);
-}
-
 static const struct icst_params realview_oscvco_params = {
 	.ref		= 24000000,
 	.vco_max	= ICST307_VCO_MAX,
@@ -57,10 +33,16 @@
 	.idx2s		= icst307_idx2s,
 };
 
-static const struct clk_icst_desc __initdata realview_icst_desc = {
+static const struct clk_icst_desc __initdata realview_osc0_desc = {
 	.params = &realview_oscvco_params,
-	.getvco = realview_oscvco_get,
-	.setvco = realview_oscvco_set,
+	.vco_offset = REALVIEW_SYS_OSC0_OFFSET,
+	.lock_offset = REALVIEW_SYS_LOCK_OFFSET,
+};
+
+static const struct clk_icst_desc __initdata realview_osc4_desc = {
+	.params = &realview_oscvco_params,
+	.vco_offset = REALVIEW_SYS_OSC4_OFFSET,
+	.lock_offset = REALVIEW_SYS_LOCK_OFFSET,
 };
 
 /*
@@ -70,13 +52,6 @@
 {
 	struct clk *clk;
 
-	sys_lock = sysbase + REALVIEW_SYS_LOCK_OFFSET;
-	if (is_pb1176)
-		sys_vcoreg = sysbase + REALVIEW_SYS_OSC0_OFFSET;
-	else
-		sys_vcoreg = sysbase + REALVIEW_SYS_OSC4_OFFSET;
-
-
 	/* APB clock dummy */
 	clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0);
 	clk_register_clkdev(clk, "apb_pclk", NULL);
@@ -108,7 +83,11 @@
 	clk_register_clkdev(clk, NULL, "sp804");
 
 	/* ICST VCO clock */
-	clk = icst_clk_register(NULL, &realview_icst_desc);
+	if (is_pb1176)
+		clk = icst_clk_register(NULL, &realview_osc0_desc, sysbase);
+	else
+		clk = icst_clk_register(NULL, &realview_osc4_desc, sysbase);
+
 	clk_register_clkdev(clk, NULL, "dev:clcd");
 	clk_register_clkdev(clk, NULL, "issp:clcd");
 }
diff --git a/drivers/clk/versatile/clk-vexpress-osc.c b/drivers/clk/versatile/clk-vexpress-osc.c
new file mode 100644
index 0000000..dcb6ae0
--- /dev/null
+++ b/drivers/clk/versatile/clk-vexpress-osc.c
@@ -0,0 +1,146 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * Copyright (C) 2012 ARM Limited
+ */
+
+#define pr_fmt(fmt) "vexpress-osc: " fmt
+
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/vexpress.h>
+
+struct vexpress_osc {
+	struct vexpress_config_func *func;
+	struct clk_hw hw;
+	unsigned long rate_min;
+	unsigned long rate_max;
+};
+
+#define to_vexpress_osc(osc) container_of(osc, struct vexpress_osc, hw)
+
+static unsigned long vexpress_osc_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	struct vexpress_osc *osc = to_vexpress_osc(hw);
+	u32 rate;
+
+	vexpress_config_read(osc->func, 0, &rate);
+
+	return rate;
+}
+
+static long vexpress_osc_round_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long *parent_rate)
+{
+	struct vexpress_osc *osc = to_vexpress_osc(hw);
+
+	if (WARN_ON(osc->rate_min && rate < osc->rate_min))
+		rate = osc->rate_min;
+
+	if (WARN_ON(osc->rate_max && rate > osc->rate_max))
+		rate = osc->rate_max;
+
+	return rate;
+}
+
+static int vexpress_osc_set_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long parent_rate)
+{
+	struct vexpress_osc *osc = to_vexpress_osc(hw);
+
+	return vexpress_config_write(osc->func, 0, rate);
+}
+
+static struct clk_ops vexpress_osc_ops = {
+	.recalc_rate = vexpress_osc_recalc_rate,
+	.round_rate = vexpress_osc_round_rate,
+	.set_rate = vexpress_osc_set_rate,
+};
+
+
+struct clk * __init vexpress_osc_setup(struct device *dev)
+{
+	struct clk_init_data init;
+	struct vexpress_osc *osc = kzalloc(sizeof(*osc), GFP_KERNEL);
+
+	if (!osc)
+		return NULL;
+
+	osc->func = vexpress_config_func_get_by_dev(dev);
+	if (!osc->func) {
+		kfree(osc);
+		return NULL;
+	}
+
+	init.name = dev_name(dev);
+	init.ops = &vexpress_osc_ops;
+	init.flags = CLK_IS_ROOT;
+	init.num_parents = 0;
+	osc->hw.init = &init;
+
+	return clk_register(NULL, &osc->hw);
+}
+
+void __init vexpress_osc_of_setup(struct device_node *node)
+{
+	struct clk_init_data init;
+	struct vexpress_osc *osc;
+	struct clk *clk;
+	u32 range[2];
+
+	osc = kzalloc(sizeof(*osc), GFP_KERNEL);
+	if (!osc)
+		goto error;
+
+	osc->func = vexpress_config_func_get_by_node(node);
+	if (!osc->func) {
+		pr_err("Failed to obtain config func for node '%s'!\n",
+				node->name);
+		goto error;
+	}
+
+	if (of_property_read_u32_array(node, "freq-range", range,
+			ARRAY_SIZE(range)) == 0) {
+		osc->rate_min = range[0];
+		osc->rate_max = range[1];
+	}
+
+	of_property_read_string(node, "clock-output-names", &init.name);
+	if (!init.name)
+		init.name = node->name;
+
+	init.ops = &vexpress_osc_ops;
+	init.flags = CLK_IS_ROOT;
+	init.num_parents = 0;
+
+	osc->hw.init = &init;
+
+	clk = clk_register(NULL, &osc->hw);
+	if (IS_ERR(clk)) {
+		pr_err("Failed to register clock '%s'!\n", init.name);
+		goto error;
+	}
+
+	of_clk_add_provider(node, of_clk_src_simple_get, clk);
+
+	pr_debug("Registered clock '%s'\n", init.name);
+
+	return;
+
+error:
+	if (osc->func)
+		vexpress_config_func_put(osc->func);
+	kfree(osc);
+}
diff --git a/drivers/clk/versatile/clk-vexpress.c b/drivers/clk/versatile/clk-vexpress.c
new file mode 100644
index 0000000..c742ac7
--- /dev/null
+++ b/drivers/clk/versatile/clk-vexpress.c
@@ -0,0 +1,142 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * Copyright (C) 2012 ARM Limited
+ */
+
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/vexpress.h>
+
+#include <asm/hardware/sp810.h>
+
+static struct clk *vexpress_sp810_timerclken[4];
+static DEFINE_SPINLOCK(vexpress_sp810_lock);
+
+static void __init vexpress_sp810_init(void __iomem *base)
+{
+	int i;
+
+	if (WARN_ON(!base))
+		return;
+
+	for (i = 0; i < ARRAY_SIZE(vexpress_sp810_timerclken); i++) {
+		char name[12];
+		const char *parents[] = {
+			"v2m:refclk32khz", /* REFCLK */
+			"v2m:refclk1mhz" /* TIMCLK */
+		};
+
+		snprintf(name, ARRAY_SIZE(name), "timerclken%d", i);
+
+		vexpress_sp810_timerclken[i] = clk_register_mux(NULL, name,
+				parents, 2, 0, base + SCCTRL,
+				SCCTRL_TIMERENnSEL_SHIFT(i), 1,
+				0, &vexpress_sp810_lock);
+
+		if (WARN_ON(IS_ERR(vexpress_sp810_timerclken[i])))
+			break;
+	}
+}
+
+
+static const char * const vexpress_clk_24mhz_periphs[] __initconst = {
+	"mb:uart0", "mb:uart1", "mb:uart2", "mb:uart3",
+	"mb:mmci", "mb:kmi0", "mb:kmi1"
+};
+
+void __init vexpress_clk_init(void __iomem *sp810_base)
+{
+	struct clk *clk;
+	int i;
+
+	clk = clk_register_fixed_rate(NULL, "dummy_apb_pclk", NULL,
+			CLK_IS_ROOT, 0);
+	WARN_ON(clk_register_clkdev(clk, "apb_pclk", NULL));
+
+	clk = clk_register_fixed_rate(NULL, "v2m:clk_24mhz", NULL,
+			CLK_IS_ROOT, 24000000);
+	for (i = 0; i < ARRAY_SIZE(vexpress_clk_24mhz_periphs); i++)
+		WARN_ON(clk_register_clkdev(clk, NULL,
+				vexpress_clk_24mhz_periphs[i]));
+
+	clk = clk_register_fixed_rate(NULL, "v2m:refclk32khz", NULL,
+			CLK_IS_ROOT, 32768);
+	WARN_ON(clk_register_clkdev(clk, NULL, "v2m:wdt"));
+
+	clk = clk_register_fixed_rate(NULL, "v2m:refclk1mhz", NULL,
+			CLK_IS_ROOT, 1000000);
+
+	vexpress_sp810_init(sp810_base);
+
+	for (i = 0; i < ARRAY_SIZE(vexpress_sp810_timerclken); i++)
+		WARN_ON(clk_set_parent(vexpress_sp810_timerclken[i], clk));
+
+	WARN_ON(clk_register_clkdev(vexpress_sp810_timerclken[0],
+				"v2m-timer0", "sp804"));
+	WARN_ON(clk_register_clkdev(vexpress_sp810_timerclken[1],
+				"v2m-timer1", "sp804"));
+}
+
+#if defined(CONFIG_OF)
+
+struct clk *vexpress_sp810_of_get(struct of_phandle_args *clkspec, void *data)
+{
+	if (WARN_ON(clkspec->args_count != 1 || clkspec->args[0] >
+			ARRAY_SIZE(vexpress_sp810_timerclken)))
+		return NULL;
+
+	return vexpress_sp810_timerclken[clkspec->args[0]];
+}
+
+static const __initconst struct of_device_id vexpress_fixed_clk_match[] = {
+	{ .compatible = "fixed-clock", .data = of_fixed_clk_setup, },
+	{ .compatible = "arm,vexpress-osc", .data = vexpress_osc_of_setup, },
+	{}
+};
+
+void __init vexpress_clk_of_init(void)
+{
+	struct device_node *node;
+	struct clk *clk;
+	struct clk *refclk, *timclk;
+
+	of_clk_init(vexpress_fixed_clk_match);
+
+	node = of_find_compatible_node(NULL, NULL, "arm,sp810");
+	vexpress_sp810_init(of_iomap(node, 0));
+	of_clk_add_provider(node, vexpress_sp810_of_get, NULL);
+
+	/* Select "better" (faster) parent for SP804 timers */
+	refclk = of_clk_get_by_name(node, "refclk");
+	timclk = of_clk_get_by_name(node, "timclk");
+	if (!WARN_ON(IS_ERR(refclk) || IS_ERR(timclk))) {
+		int i = 0;
+
+		if (clk_get_rate(refclk) > clk_get_rate(timclk))
+			clk = refclk;
+		else
+			clk = timclk;
+
+		for (i = 0; i < ARRAY_SIZE(vexpress_sp810_timerclken); i++)
+			WARN_ON(clk_set_parent(vexpress_sp810_timerclken[i],
+					clk));
+	}
+
+	WARN_ON(clk_register_clkdev(vexpress_sp810_timerclken[0],
+				"v2m-timer0", "sp804"));
+	WARN_ON(clk_register_clkdev(vexpress_sp810_timerclken[1],
+				"v2m-timer1", "sp804"));
+}
+
+#endif
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 5961e64..a0b3661 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -76,3 +76,10 @@
 	help
 	  This adds the CPUFreq driver for Samsung EXYNOS5250
 	  SoC.
+
+config ARM_SPEAR_CPUFREQ
+	bool "SPEAr CPUFreq support"
+	depends on PLAT_SPEAR
+	default y
+	help
+	  This adds the CPUFreq driver support for SPEAr SOCs.
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 1bc90e1..1f254ec0 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -7,8 +7,8 @@
 obj-$(CONFIG_CPU_FREQ_GOV_PERFORMANCE)	+= cpufreq_performance.o
 obj-$(CONFIG_CPU_FREQ_GOV_POWERSAVE)	+= cpufreq_powersave.o
 obj-$(CONFIG_CPU_FREQ_GOV_USERSPACE)	+= cpufreq_userspace.o
-obj-$(CONFIG_CPU_FREQ_GOV_ONDEMAND)	+= cpufreq_ondemand.o
-obj-$(CONFIG_CPU_FREQ_GOV_CONSERVATIVE)	+= cpufreq_conservative.o
+obj-$(CONFIG_CPU_FREQ_GOV_ONDEMAND)	+= cpufreq_ondemand.o cpufreq_governor.o
+obj-$(CONFIG_CPU_FREQ_GOV_CONSERVATIVE)	+= cpufreq_conservative.o cpufreq_governor.o
 
 # CPUfreq cross-arch helpers
 obj-$(CONFIG_CPU_FREQ_TABLE)		+= freq_table.o
@@ -50,6 +50,7 @@
 obj-$(CONFIG_ARM_EXYNOS4X12_CPUFREQ)	+= exynos4x12-cpufreq.o
 obj-$(CONFIG_ARM_EXYNOS5250_CPUFREQ)	+= exynos5250-cpufreq.o
 obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ)     += omap-cpufreq.o
+obj-$(CONFIG_ARM_SPEAR_CPUFREQ)		+= spear-cpufreq.o
 
 ##################################################################################
 # PowerPC platform drivers
diff --git a/drivers/cpufreq/cpufreq-cpu0.c b/drivers/cpufreq/cpufreq-cpu0.c
index e915827..52bf36d 100644
--- a/drivers/cpufreq/cpufreq-cpu0.c
+++ b/drivers/cpufreq/cpufreq-cpu0.c
@@ -174,7 +174,7 @@
 	.attr = cpu0_cpufreq_attr,
 };
 
-static int __devinit cpu0_cpufreq_driver_init(void)
+static int cpu0_cpufreq_driver_init(void)
 {
 	struct device_node *np;
 	int ret;
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index fb8a527..1f93dbd 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -15,6 +15,8 @@
  *
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
@@ -127,7 +129,7 @@
 pure_initcall(init_cpufreq_transition_notifier_list);
 
 static int off __read_mostly;
-int cpufreq_disabled(void)
+static int cpufreq_disabled(void)
 {
 	return off;
 }
@@ -402,7 +404,7 @@
 static ssize_t store_##file_name					\
 (struct cpufreq_policy *policy, const char *buf, size_t count)		\
 {									\
-	unsigned int ret = -EINVAL;					\
+	unsigned int ret;						\
 	struct cpufreq_policy new_policy;				\
 									\
 	ret = cpufreq_get_policy(&new_policy, policy->cpu);		\
@@ -445,7 +447,7 @@
 	else if (policy->policy == CPUFREQ_POLICY_PERFORMANCE)
 		return sprintf(buf, "performance\n");
 	else if (policy->governor)
-		return scnprintf(buf, CPUFREQ_NAME_LEN, "%s\n",
+		return scnprintf(buf, CPUFREQ_NAME_PLEN, "%s\n",
 				policy->governor->name);
 	return -EINVAL;
 }
@@ -457,7 +459,7 @@
 static ssize_t store_scaling_governor(struct cpufreq_policy *policy,
 					const char *buf, size_t count)
 {
-	unsigned int ret = -EINVAL;
+	unsigned int ret;
 	char	str_governor[16];
 	struct cpufreq_policy new_policy;
 
@@ -491,7 +493,7 @@
  */
 static ssize_t show_scaling_driver(struct cpufreq_policy *policy, char *buf)
 {
-	return scnprintf(buf, CPUFREQ_NAME_LEN, "%s\n", cpufreq_driver->name);
+	return scnprintf(buf, CPUFREQ_NAME_PLEN, "%s\n", cpufreq_driver->name);
 }
 
 /**
@@ -512,7 +514,7 @@
 		if (i >= (ssize_t) ((PAGE_SIZE / sizeof(char))
 		    - (CPUFREQ_NAME_LEN + 2)))
 			goto out;
-		i += scnprintf(&buf[i], CPUFREQ_NAME_LEN, "%s ", t->name);
+		i += scnprintf(&buf[i], CPUFREQ_NAME_PLEN, "%s ", t->name);
 	}
 out:
 	i += sprintf(&buf[i], "\n");
@@ -581,7 +583,7 @@
 }
 
 /**
- * show_scaling_driver - show the current cpufreq HW/BIOS limitation
+ * show_bios_limit - show the current cpufreq HW/BIOS limitation
  */
 static ssize_t show_bios_limit(struct cpufreq_policy *policy, char *buf)
 {
@@ -1468,12 +1470,23 @@
 			    unsigned int relation)
 {
 	int retval = -EINVAL;
+	unsigned int old_target_freq = target_freq;
 
 	if (cpufreq_disabled())
 		return -ENODEV;
 
-	pr_debug("target for CPU %u: %u kHz, relation %u\n", policy->cpu,
-		target_freq, relation);
+	/* Make sure that target_freq is within supported range */
+	if (target_freq > policy->max)
+		target_freq = policy->max;
+	if (target_freq < policy->min)
+		target_freq = policy->min;
+
+	pr_debug("target for CPU %u: %u kHz, relation %u, requested %u kHz\n",
+			policy->cpu, target_freq, relation, old_target_freq);
+
+	if (target_freq == policy->cur)
+		return 0;
+
 	if (cpu_online(policy->cpu) && cpufreq_driver->target)
 		retval = cpufreq_driver->target(policy, target_freq, relation);
 
@@ -1509,12 +1522,14 @@
 {
 	int ret = 0;
 
+	if (!(cpu_online(cpu) && cpufreq_driver->getavg))
+		return 0;
+
 	policy = cpufreq_cpu_get(policy->cpu);
 	if (!policy)
 		return -EINVAL;
 
-	if (cpu_online(cpu) && cpufreq_driver->getavg)
-		ret = cpufreq_driver->getavg(policy, cpu);
+	ret = cpufreq_driver->getavg(policy, cpu);
 
 	cpufreq_cpu_put(policy);
 	return ret;
diff --git a/drivers/cpufreq/cpufreq_conservative.c b/drivers/cpufreq/cpufreq_conservative.c
index a152af7..64ef737 100644
--- a/drivers/cpufreq/cpufreq_conservative.c
+++ b/drivers/cpufreq/cpufreq_conservative.c
@@ -11,83 +11,30 @@
  * published by the Free Software Foundation.
  */
 
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
 #include <linux/cpufreq.h>
-#include <linux/cpu.h>
-#include <linux/jiffies.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
 #include <linux/kernel_stat.h>
+#include <linux/kobject.h>
+#include <linux/module.h>
 #include <linux/mutex.h>
-#include <linux/hrtimer.h>
-#include <linux/tick.h>
-#include <linux/ktime.h>
-#include <linux/sched.h>
+#include <linux/notifier.h>
+#include <linux/percpu-defs.h>
+#include <linux/sysfs.h>
+#include <linux/types.h>
 
-/*
- * dbs is used in this file as a shortform for demandbased switching
- * It helps to keep variable names smaller, simpler
- */
+#include "cpufreq_governor.h"
 
+/* Conservative governor macors */
 #define DEF_FREQUENCY_UP_THRESHOLD		(80)
 #define DEF_FREQUENCY_DOWN_THRESHOLD		(20)
-
-/*
- * The polling frequency of this governor depends on the capability of
- * the processor. Default polling frequency is 1000 times the transition
- * latency of the processor. The governor will work on any processor with
- * transition latency <= 10mS, using appropriate sampling
- * rate.
- * For CPUs with transition latency > 10mS (mostly drivers with CPUFREQ_ETERNAL)
- * this governor will not work.
- * All times here are in uS.
- */
-#define MIN_SAMPLING_RATE_RATIO			(2)
-
-static unsigned int min_sampling_rate;
-
-#define LATENCY_MULTIPLIER			(1000)
-#define MIN_LATENCY_MULTIPLIER			(100)
 #define DEF_SAMPLING_DOWN_FACTOR		(1)
 #define MAX_SAMPLING_DOWN_FACTOR		(10)
-#define TRANSITION_LATENCY_LIMIT		(10 * 1000 * 1000)
 
-static void do_dbs_timer(struct work_struct *work);
+static struct dbs_data cs_dbs_data;
+static DEFINE_PER_CPU(struct cs_cpu_dbs_info_s, cs_cpu_dbs_info);
 
-struct cpu_dbs_info_s {
-	cputime64_t prev_cpu_idle;
-	cputime64_t prev_cpu_wall;
-	cputime64_t prev_cpu_nice;
-	struct cpufreq_policy *cur_policy;
-	struct delayed_work work;
-	unsigned int down_skip;
-	unsigned int requested_freq;
-	int cpu;
-	unsigned int enable:1;
-	/*
-	 * percpu mutex that serializes governor limit change with
-	 * do_dbs_timer invocation. We do not want do_dbs_timer to run
-	 * when user is changing the governor or limits.
-	 */
-	struct mutex timer_mutex;
-};
-static DEFINE_PER_CPU(struct cpu_dbs_info_s, cs_cpu_dbs_info);
-
-static unsigned int dbs_enable;	/* number of CPUs using this policy */
-
-/*
- * dbs_mutex protects dbs_enable in governor start/stop.
- */
-static DEFINE_MUTEX(dbs_mutex);
-
-static struct dbs_tuners {
-	unsigned int sampling_rate;
-	unsigned int sampling_down_factor;
-	unsigned int up_threshold;
-	unsigned int down_threshold;
-	unsigned int ignore_nice;
-	unsigned int freq_step;
-} dbs_tuners_ins = {
+static struct cs_dbs_tuners cs_tuners = {
 	.up_threshold = DEF_FREQUENCY_UP_THRESHOLD,
 	.down_threshold = DEF_FREQUENCY_DOWN_THRESHOLD,
 	.sampling_down_factor = DEF_SAMPLING_DOWN_FACTOR,
@@ -95,95 +42,121 @@
 	.freq_step = 5,
 };
 
-static inline u64 get_cpu_idle_time_jiffy(unsigned int cpu, u64 *wall)
+/*
+ * Every sampling_rate, we check, if current idle time is less than 20%
+ * (default), then we try to increase frequency Every sampling_rate *
+ * sampling_down_factor, we check, if current idle time is more than 80%, then
+ * we try to decrease frequency
+ *
+ * Any frequency increase takes it to the maximum frequency. Frequency reduction
+ * happens at minimum steps of 5% (default) of maximum frequency
+ */
+static void cs_check_cpu(int cpu, unsigned int load)
 {
-	u64 idle_time;
-	u64 cur_wall_time;
-	u64 busy_time;
-
-	cur_wall_time = jiffies64_to_cputime64(get_jiffies_64());
-
-	busy_time  = kcpustat_cpu(cpu).cpustat[CPUTIME_USER];
-	busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_SYSTEM];
-	busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_IRQ];
-	busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_SOFTIRQ];
-	busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_STEAL];
-	busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_NICE];
-
-	idle_time = cur_wall_time - busy_time;
-	if (wall)
-		*wall = jiffies_to_usecs(cur_wall_time);
-
-	return jiffies_to_usecs(idle_time);
-}
-
-static inline cputime64_t get_cpu_idle_time(unsigned int cpu, cputime64_t *wall)
-{
-	u64 idle_time = get_cpu_idle_time_us(cpu, NULL);
-
-	if (idle_time == -1ULL)
-		return get_cpu_idle_time_jiffy(cpu, wall);
-	else
-		idle_time += get_cpu_iowait_time_us(cpu, wall);
-
-	return idle_time;
-}
-
-/* keep track of frequency transitions */
-static int
-dbs_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
-		     void *data)
-{
-	struct cpufreq_freqs *freq = data;
-	struct cpu_dbs_info_s *this_dbs_info = &per_cpu(cs_cpu_dbs_info,
-							freq->cpu);
-
-	struct cpufreq_policy *policy;
-
-	if (!this_dbs_info->enable)
-		return 0;
-
-	policy = this_dbs_info->cur_policy;
+	struct cs_cpu_dbs_info_s *dbs_info = &per_cpu(cs_cpu_dbs_info, cpu);
+	struct cpufreq_policy *policy = dbs_info->cdbs.cur_policy;
+	unsigned int freq_target;
 
 	/*
-	 * we only care if our internally tracked freq moves outside
-	 * the 'valid' ranges of freqency available to us otherwise
-	 * we do not change it
+	 * break out if we 'cannot' reduce the speed as the user might
+	 * want freq_step to be zero
+	 */
+	if (cs_tuners.freq_step == 0)
+		return;
+
+	/* Check for frequency increase */
+	if (load > cs_tuners.up_threshold) {
+		dbs_info->down_skip = 0;
+
+		/* if we are already at full speed then break out early */
+		if (dbs_info->requested_freq == policy->max)
+			return;
+
+		freq_target = (cs_tuners.freq_step * policy->max) / 100;
+
+		/* max freq cannot be less than 100. But who knows.... */
+		if (unlikely(freq_target == 0))
+			freq_target = 5;
+
+		dbs_info->requested_freq += freq_target;
+		if (dbs_info->requested_freq > policy->max)
+			dbs_info->requested_freq = policy->max;
+
+		__cpufreq_driver_target(policy, dbs_info->requested_freq,
+			CPUFREQ_RELATION_H);
+		return;
+	}
+
+	/*
+	 * The optimal frequency is the frequency that is the lowest that can
+	 * support the current CPU usage without triggering the up policy. To be
+	 * safe, we focus 10 points under the threshold.
+	 */
+	if (load < (cs_tuners.down_threshold - 10)) {
+		freq_target = (cs_tuners.freq_step * policy->max) / 100;
+
+		dbs_info->requested_freq -= freq_target;
+		if (dbs_info->requested_freq < policy->min)
+			dbs_info->requested_freq = policy->min;
+
+		/*
+		 * if we cannot reduce the frequency anymore, break out early
+		 */
+		if (policy->cur == policy->min)
+			return;
+
+		__cpufreq_driver_target(policy, dbs_info->requested_freq,
+				CPUFREQ_RELATION_H);
+		return;
+	}
+}
+
+static void cs_dbs_timer(struct work_struct *work)
+{
+	struct cs_cpu_dbs_info_s *dbs_info = container_of(work,
+			struct cs_cpu_dbs_info_s, cdbs.work.work);
+	unsigned int cpu = dbs_info->cdbs.cpu;
+	int delay = delay_for_sampling_rate(cs_tuners.sampling_rate);
+
+	mutex_lock(&dbs_info->cdbs.timer_mutex);
+
+	dbs_check_cpu(&cs_dbs_data, cpu);
+
+	schedule_delayed_work_on(cpu, &dbs_info->cdbs.work, delay);
+	mutex_unlock(&dbs_info->cdbs.timer_mutex);
+}
+
+static int dbs_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
+		void *data)
+{
+	struct cpufreq_freqs *freq = data;
+	struct cs_cpu_dbs_info_s *dbs_info =
+					&per_cpu(cs_cpu_dbs_info, freq->cpu);
+	struct cpufreq_policy *policy;
+
+	if (!dbs_info->enable)
+		return 0;
+
+	policy = dbs_info->cdbs.cur_policy;
+
+	/*
+	 * we only care if our internally tracked freq moves outside the 'valid'
+	 * ranges of freqency available to us otherwise we do not change it
 	*/
-	if (this_dbs_info->requested_freq > policy->max
-			|| this_dbs_info->requested_freq < policy->min)
-		this_dbs_info->requested_freq = freq->new;
+	if (dbs_info->requested_freq > policy->max
+			|| dbs_info->requested_freq < policy->min)
+		dbs_info->requested_freq = freq->new;
 
 	return 0;
 }
 
-static struct notifier_block dbs_cpufreq_notifier_block = {
-	.notifier_call = dbs_cpufreq_notifier
-};
-
 /************************** sysfs interface ************************/
 static ssize_t show_sampling_rate_min(struct kobject *kobj,
 				      struct attribute *attr, char *buf)
 {
-	return sprintf(buf, "%u\n", min_sampling_rate);
+	return sprintf(buf, "%u\n", cs_dbs_data.min_sampling_rate);
 }
 
-define_one_global_ro(sampling_rate_min);
-
-/* cpufreq_conservative Governor Tunables */
-#define show_one(file_name, object)					\
-static ssize_t show_##file_name						\
-(struct kobject *kobj, struct attribute *attr, char *buf)		\
-{									\
-	return sprintf(buf, "%u\n", dbs_tuners_ins.object);		\
-}
-show_one(sampling_rate, sampling_rate);
-show_one(sampling_down_factor, sampling_down_factor);
-show_one(up_threshold, up_threshold);
-show_one(down_threshold, down_threshold);
-show_one(ignore_nice_load, ignore_nice);
-show_one(freq_step, freq_step);
-
 static ssize_t store_sampling_down_factor(struct kobject *a,
 					  struct attribute *b,
 					  const char *buf, size_t count)
@@ -195,7 +168,7 @@
 	if (ret != 1 || input > MAX_SAMPLING_DOWN_FACTOR || input < 1)
 		return -EINVAL;
 
-	dbs_tuners_ins.sampling_down_factor = input;
+	cs_tuners.sampling_down_factor = input;
 	return count;
 }
 
@@ -209,7 +182,7 @@
 	if (ret != 1)
 		return -EINVAL;
 
-	dbs_tuners_ins.sampling_rate = max(input, min_sampling_rate);
+	cs_tuners.sampling_rate = max(input, cs_dbs_data.min_sampling_rate);
 	return count;
 }
 
@@ -220,11 +193,10 @@
 	int ret;
 	ret = sscanf(buf, "%u", &input);
 
-	if (ret != 1 || input > 100 ||
-			input <= dbs_tuners_ins.down_threshold)
+	if (ret != 1 || input > 100 || input <= cs_tuners.down_threshold)
 		return -EINVAL;
 
-	dbs_tuners_ins.up_threshold = input;
+	cs_tuners.up_threshold = input;
 	return count;
 }
 
@@ -237,21 +209,19 @@
 
 	/* cannot be lower than 11 otherwise freq will not fall */
 	if (ret != 1 || input < 11 || input > 100 ||
-			input >= dbs_tuners_ins.up_threshold)
+			input >= cs_tuners.up_threshold)
 		return -EINVAL;
 
-	dbs_tuners_ins.down_threshold = input;
+	cs_tuners.down_threshold = input;
 	return count;
 }
 
 static ssize_t store_ignore_nice_load(struct kobject *a, struct attribute *b,
 				      const char *buf, size_t count)
 {
-	unsigned int input;
+	unsigned int input, j;
 	int ret;
 
-	unsigned int j;
-
 	ret = sscanf(buf, "%u", &input);
 	if (ret != 1)
 		return -EINVAL;
@@ -259,19 +229,20 @@
 	if (input > 1)
 		input = 1;
 
-	if (input == dbs_tuners_ins.ignore_nice) /* nothing to do */
+	if (input == cs_tuners.ignore_nice) /* nothing to do */
 		return count;
 
-	dbs_tuners_ins.ignore_nice = input;
+	cs_tuners.ignore_nice = input;
 
 	/* we need to re-evaluate prev_cpu_idle */
 	for_each_online_cpu(j) {
-		struct cpu_dbs_info_s *dbs_info;
+		struct cs_cpu_dbs_info_s *dbs_info;
 		dbs_info = &per_cpu(cs_cpu_dbs_info, j);
-		dbs_info->prev_cpu_idle = get_cpu_idle_time(j,
-						&dbs_info->prev_cpu_wall);
-		if (dbs_tuners_ins.ignore_nice)
-			dbs_info->prev_cpu_nice = kcpustat_cpu(j).cpustat[CPUTIME_NICE];
+		dbs_info->cdbs.prev_cpu_idle = get_cpu_idle_time(j,
+						&dbs_info->cdbs.prev_cpu_wall);
+		if (cs_tuners.ignore_nice)
+			dbs_info->cdbs.prev_cpu_nice =
+				kcpustat_cpu(j).cpustat[CPUTIME_NICE];
 	}
 	return count;
 }
@@ -289,18 +260,28 @@
 	if (input > 100)
 		input = 100;
 
-	/* no need to test here if freq_step is zero as the user might actually
-	 * want this, they would be crazy though :) */
-	dbs_tuners_ins.freq_step = input;
+	/*
+	 * no need to test here if freq_step is zero as the user might actually
+	 * want this, they would be crazy though :)
+	 */
+	cs_tuners.freq_step = input;
 	return count;
 }
 
+show_one(cs, sampling_rate, sampling_rate);
+show_one(cs, sampling_down_factor, sampling_down_factor);
+show_one(cs, up_threshold, up_threshold);
+show_one(cs, down_threshold, down_threshold);
+show_one(cs, ignore_nice_load, ignore_nice);
+show_one(cs, freq_step, freq_step);
+
 define_one_global_rw(sampling_rate);
 define_one_global_rw(sampling_down_factor);
 define_one_global_rw(up_threshold);
 define_one_global_rw(down_threshold);
 define_one_global_rw(ignore_nice_load);
 define_one_global_rw(freq_step);
+define_one_global_ro(sampling_rate_min);
 
 static struct attribute *dbs_attributes[] = {
 	&sampling_rate_min.attr,
@@ -313,283 +294,38 @@
 	NULL
 };
 
-static struct attribute_group dbs_attr_group = {
+static struct attribute_group cs_attr_group = {
 	.attrs = dbs_attributes,
 	.name = "conservative",
 };
 
 /************************** sysfs end ************************/
 
-static void dbs_check_cpu(struct cpu_dbs_info_s *this_dbs_info)
-{
-	unsigned int load = 0;
-	unsigned int max_load = 0;
-	unsigned int freq_target;
+define_get_cpu_dbs_routines(cs_cpu_dbs_info);
 
-	struct cpufreq_policy *policy;
-	unsigned int j;
+static struct notifier_block cs_cpufreq_notifier_block = {
+	.notifier_call = dbs_cpufreq_notifier,
+};
 
-	policy = this_dbs_info->cur_policy;
+static struct cs_ops cs_ops = {
+	.notifier_block = &cs_cpufreq_notifier_block,
+};
 
-	/*
-	 * Every sampling_rate, we check, if current idle time is less
-	 * than 20% (default), then we try to increase frequency
-	 * Every sampling_rate*sampling_down_factor, we check, if current
-	 * idle time is more than 80%, then we try to decrease frequency
-	 *
-	 * Any frequency increase takes it to the maximum frequency.
-	 * Frequency reduction happens at minimum steps of
-	 * 5% (default) of maximum frequency
-	 */
+static struct dbs_data cs_dbs_data = {
+	.governor = GOV_CONSERVATIVE,
+	.attr_group = &cs_attr_group,
+	.tuners = &cs_tuners,
+	.get_cpu_cdbs = get_cpu_cdbs,
+	.get_cpu_dbs_info_s = get_cpu_dbs_info_s,
+	.gov_dbs_timer = cs_dbs_timer,
+	.gov_check_cpu = cs_check_cpu,
+	.gov_ops = &cs_ops,
+};
 
-	/* Get Absolute Load */
-	for_each_cpu(j, policy->cpus) {
-		struct cpu_dbs_info_s *j_dbs_info;
-		cputime64_t cur_wall_time, cur_idle_time;
-		unsigned int idle_time, wall_time;
-
-		j_dbs_info = &per_cpu(cs_cpu_dbs_info, j);
-
-		cur_idle_time = get_cpu_idle_time(j, &cur_wall_time);
-
-		wall_time = (unsigned int)
-			(cur_wall_time - j_dbs_info->prev_cpu_wall);
-		j_dbs_info->prev_cpu_wall = cur_wall_time;
-
-		idle_time = (unsigned int)
-			(cur_idle_time - j_dbs_info->prev_cpu_idle);
-		j_dbs_info->prev_cpu_idle = cur_idle_time;
-
-		if (dbs_tuners_ins.ignore_nice) {
-			u64 cur_nice;
-			unsigned long cur_nice_jiffies;
-
-			cur_nice = kcpustat_cpu(j).cpustat[CPUTIME_NICE] -
-					 j_dbs_info->prev_cpu_nice;
-			/*
-			 * Assumption: nice time between sampling periods will
-			 * be less than 2^32 jiffies for 32 bit sys
-			 */
-			cur_nice_jiffies = (unsigned long)
-					cputime64_to_jiffies64(cur_nice);
-
-			j_dbs_info->prev_cpu_nice = kcpustat_cpu(j).cpustat[CPUTIME_NICE];
-			idle_time += jiffies_to_usecs(cur_nice_jiffies);
-		}
-
-		if (unlikely(!wall_time || wall_time < idle_time))
-			continue;
-
-		load = 100 * (wall_time - idle_time) / wall_time;
-
-		if (load > max_load)
-			max_load = load;
-	}
-
-	/*
-	 * break out if we 'cannot' reduce the speed as the user might
-	 * want freq_step to be zero
-	 */
-	if (dbs_tuners_ins.freq_step == 0)
-		return;
-
-	/* Check for frequency increase */
-	if (max_load > dbs_tuners_ins.up_threshold) {
-		this_dbs_info->down_skip = 0;
-
-		/* if we are already at full speed then break out early */
-		if (this_dbs_info->requested_freq == policy->max)
-			return;
-
-		freq_target = (dbs_tuners_ins.freq_step * policy->max) / 100;
-
-		/* max freq cannot be less than 100. But who knows.... */
-		if (unlikely(freq_target == 0))
-			freq_target = 5;
-
-		this_dbs_info->requested_freq += freq_target;
-		if (this_dbs_info->requested_freq > policy->max)
-			this_dbs_info->requested_freq = policy->max;
-
-		__cpufreq_driver_target(policy, this_dbs_info->requested_freq,
-			CPUFREQ_RELATION_H);
-		return;
-	}
-
-	/*
-	 * The optimal frequency is the frequency that is the lowest that
-	 * can support the current CPU usage without triggering the up
-	 * policy. To be safe, we focus 10 points under the threshold.
-	 */
-	if (max_load < (dbs_tuners_ins.down_threshold - 10)) {
-		freq_target = (dbs_tuners_ins.freq_step * policy->max) / 100;
-
-		this_dbs_info->requested_freq -= freq_target;
-		if (this_dbs_info->requested_freq < policy->min)
-			this_dbs_info->requested_freq = policy->min;
-
-		/*
-		 * if we cannot reduce the frequency anymore, break out early
-		 */
-		if (policy->cur == policy->min)
-			return;
-
-		__cpufreq_driver_target(policy, this_dbs_info->requested_freq,
-				CPUFREQ_RELATION_H);
-		return;
-	}
-}
-
-static void do_dbs_timer(struct work_struct *work)
-{
-	struct cpu_dbs_info_s *dbs_info =
-		container_of(work, struct cpu_dbs_info_s, work.work);
-	unsigned int cpu = dbs_info->cpu;
-
-	/* We want all CPUs to do sampling nearly on same jiffy */
-	int delay = usecs_to_jiffies(dbs_tuners_ins.sampling_rate);
-
-	delay -= jiffies % delay;
-
-	mutex_lock(&dbs_info->timer_mutex);
-
-	dbs_check_cpu(dbs_info);
-
-	schedule_delayed_work_on(cpu, &dbs_info->work, delay);
-	mutex_unlock(&dbs_info->timer_mutex);
-}
-
-static inline void dbs_timer_init(struct cpu_dbs_info_s *dbs_info)
-{
-	/* We want all CPUs to do sampling nearly on same jiffy */
-	int delay = usecs_to_jiffies(dbs_tuners_ins.sampling_rate);
-	delay -= jiffies % delay;
-
-	dbs_info->enable = 1;
-	INIT_DEFERRABLE_WORK(&dbs_info->work, do_dbs_timer);
-	schedule_delayed_work_on(dbs_info->cpu, &dbs_info->work, delay);
-}
-
-static inline void dbs_timer_exit(struct cpu_dbs_info_s *dbs_info)
-{
-	dbs_info->enable = 0;
-	cancel_delayed_work_sync(&dbs_info->work);
-}
-
-static int cpufreq_governor_dbs(struct cpufreq_policy *policy,
+static int cs_cpufreq_governor_dbs(struct cpufreq_policy *policy,
 				   unsigned int event)
 {
-	unsigned int cpu = policy->cpu;
-	struct cpu_dbs_info_s *this_dbs_info;
-	unsigned int j;
-	int rc;
-
-	this_dbs_info = &per_cpu(cs_cpu_dbs_info, cpu);
-
-	switch (event) {
-	case CPUFREQ_GOV_START:
-		if ((!cpu_online(cpu)) || (!policy->cur))
-			return -EINVAL;
-
-		mutex_lock(&dbs_mutex);
-
-		for_each_cpu(j, policy->cpus) {
-			struct cpu_dbs_info_s *j_dbs_info;
-			j_dbs_info = &per_cpu(cs_cpu_dbs_info, j);
-			j_dbs_info->cur_policy = policy;
-
-			j_dbs_info->prev_cpu_idle = get_cpu_idle_time(j,
-						&j_dbs_info->prev_cpu_wall);
-			if (dbs_tuners_ins.ignore_nice)
-				j_dbs_info->prev_cpu_nice =
-						kcpustat_cpu(j).cpustat[CPUTIME_NICE];
-		}
-		this_dbs_info->cpu = cpu;
-		this_dbs_info->down_skip = 0;
-		this_dbs_info->requested_freq = policy->cur;
-
-		mutex_init(&this_dbs_info->timer_mutex);
-		dbs_enable++;
-		/*
-		 * Start the timerschedule work, when this governor
-		 * is used for first time
-		 */
-		if (dbs_enable == 1) {
-			unsigned int latency;
-			/* policy latency is in nS. Convert it to uS first */
-			latency = policy->cpuinfo.transition_latency / 1000;
-			if (latency == 0)
-				latency = 1;
-
-			rc = sysfs_create_group(cpufreq_global_kobject,
-						&dbs_attr_group);
-			if (rc) {
-				mutex_unlock(&dbs_mutex);
-				return rc;
-			}
-
-			/*
-			 * conservative does not implement micro like ondemand
-			 * governor, thus we are bound to jiffes/HZ
-			 */
-			min_sampling_rate =
-				MIN_SAMPLING_RATE_RATIO * jiffies_to_usecs(10);
-			/* Bring kernel and HW constraints together */
-			min_sampling_rate = max(min_sampling_rate,
-					MIN_LATENCY_MULTIPLIER * latency);
-			dbs_tuners_ins.sampling_rate =
-				max(min_sampling_rate,
-				    latency * LATENCY_MULTIPLIER);
-
-			cpufreq_register_notifier(
-					&dbs_cpufreq_notifier_block,
-					CPUFREQ_TRANSITION_NOTIFIER);
-		}
-		mutex_unlock(&dbs_mutex);
-
-		dbs_timer_init(this_dbs_info);
-
-		break;
-
-	case CPUFREQ_GOV_STOP:
-		dbs_timer_exit(this_dbs_info);
-
-		mutex_lock(&dbs_mutex);
-		dbs_enable--;
-		mutex_destroy(&this_dbs_info->timer_mutex);
-
-		/*
-		 * Stop the timerschedule work, when this governor
-		 * is used for first time
-		 */
-		if (dbs_enable == 0)
-			cpufreq_unregister_notifier(
-					&dbs_cpufreq_notifier_block,
-					CPUFREQ_TRANSITION_NOTIFIER);
-
-		mutex_unlock(&dbs_mutex);
-		if (!dbs_enable)
-			sysfs_remove_group(cpufreq_global_kobject,
-					   &dbs_attr_group);
-
-		break;
-
-	case CPUFREQ_GOV_LIMITS:
-		mutex_lock(&this_dbs_info->timer_mutex);
-		if (policy->max < this_dbs_info->cur_policy->cur)
-			__cpufreq_driver_target(
-					this_dbs_info->cur_policy,
-					policy->max, CPUFREQ_RELATION_H);
-		else if (policy->min > this_dbs_info->cur_policy->cur)
-			__cpufreq_driver_target(
-					this_dbs_info->cur_policy,
-					policy->min, CPUFREQ_RELATION_L);
-		dbs_check_cpu(this_dbs_info);
-		mutex_unlock(&this_dbs_info->timer_mutex);
-
-		break;
-	}
-	return 0;
+	return cpufreq_governor_dbs(&cs_dbs_data, policy, event);
 }
 
 #ifndef CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE
@@ -597,13 +333,14 @@
 #endif
 struct cpufreq_governor cpufreq_gov_conservative = {
 	.name			= "conservative",
-	.governor		= cpufreq_governor_dbs,
+	.governor		= cs_cpufreq_governor_dbs,
 	.max_transition_latency	= TRANSITION_LATENCY_LIMIT,
 	.owner			= THIS_MODULE,
 };
 
 static int __init cpufreq_gov_dbs_init(void)
 {
+	mutex_init(&cs_dbs_data.mutex);
 	return cpufreq_register_governor(&cpufreq_gov_conservative);
 }
 
@@ -612,7 +349,6 @@
 	cpufreq_unregister_governor(&cpufreq_gov_conservative);
 }
 
-
 MODULE_AUTHOR("Alexander Clouter <alex@digriz.org.uk>");
 MODULE_DESCRIPTION("'cpufreq_conservative' - A dynamic cpufreq governor for "
 		"Low Latency Frequency Transition capable processors "
diff --git a/drivers/cpufreq/cpufreq_governor.c b/drivers/cpufreq/cpufreq_governor.c
new file mode 100644
index 0000000..6c5f1d3
--- /dev/null
+++ b/drivers/cpufreq/cpufreq_governor.c
@@ -0,0 +1,318 @@
+/*
+ * drivers/cpufreq/cpufreq_governor.c
+ *
+ * CPUFREQ governors common code
+ *
+ * Copyright	(C) 2001 Russell King
+ *		(C) 2003 Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>.
+ *		(C) 2003 Jun Nakajima <jun.nakajima@intel.com>
+ *		(C) 2009 Alexander Clouter <alex@digriz.org.uk>
+ *		(c) 2012 Viresh Kumar <viresh.kumar@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <asm/cputime.h>
+#include <linux/cpufreq.h>
+#include <linux/cpumask.h>
+#include <linux/export.h>
+#include <linux/kernel_stat.h>
+#include <linux/mutex.h>
+#include <linux/tick.h>
+#include <linux/types.h>
+#include <linux/workqueue.h>
+
+#include "cpufreq_governor.h"
+
+static inline u64 get_cpu_idle_time_jiffy(unsigned int cpu, u64 *wall)
+{
+	u64 idle_time;
+	u64 cur_wall_time;
+	u64 busy_time;
+
+	cur_wall_time = jiffies64_to_cputime64(get_jiffies_64());
+
+	busy_time = kcpustat_cpu(cpu).cpustat[CPUTIME_USER];
+	busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_SYSTEM];
+	busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_IRQ];
+	busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_SOFTIRQ];
+	busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_STEAL];
+	busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_NICE];
+
+	idle_time = cur_wall_time - busy_time;
+	if (wall)
+		*wall = cputime_to_usecs(cur_wall_time);
+
+	return cputime_to_usecs(idle_time);
+}
+
+u64 get_cpu_idle_time(unsigned int cpu, u64 *wall)
+{
+	u64 idle_time = get_cpu_idle_time_us(cpu, NULL);
+
+	if (idle_time == -1ULL)
+		return get_cpu_idle_time_jiffy(cpu, wall);
+	else
+		idle_time += get_cpu_iowait_time_us(cpu, wall);
+
+	return idle_time;
+}
+EXPORT_SYMBOL_GPL(get_cpu_idle_time);
+
+void dbs_check_cpu(struct dbs_data *dbs_data, int cpu)
+{
+	struct cpu_dbs_common_info *cdbs = dbs_data->get_cpu_cdbs(cpu);
+	struct od_dbs_tuners *od_tuners = dbs_data->tuners;
+	struct cs_dbs_tuners *cs_tuners = dbs_data->tuners;
+	struct cpufreq_policy *policy;
+	unsigned int max_load = 0;
+	unsigned int ignore_nice;
+	unsigned int j;
+
+	if (dbs_data->governor == GOV_ONDEMAND)
+		ignore_nice = od_tuners->ignore_nice;
+	else
+		ignore_nice = cs_tuners->ignore_nice;
+
+	policy = cdbs->cur_policy;
+
+	/* Get Absolute Load (in terms of freq for ondemand gov) */
+	for_each_cpu(j, policy->cpus) {
+		struct cpu_dbs_common_info *j_cdbs;
+		u64 cur_wall_time, cur_idle_time, cur_iowait_time;
+		unsigned int idle_time, wall_time, iowait_time;
+		unsigned int load;
+
+		j_cdbs = dbs_data->get_cpu_cdbs(j);
+
+		cur_idle_time = get_cpu_idle_time(j, &cur_wall_time);
+
+		wall_time = (unsigned int)
+			(cur_wall_time - j_cdbs->prev_cpu_wall);
+		j_cdbs->prev_cpu_wall = cur_wall_time;
+
+		idle_time = (unsigned int)
+			(cur_idle_time - j_cdbs->prev_cpu_idle);
+		j_cdbs->prev_cpu_idle = cur_idle_time;
+
+		if (ignore_nice) {
+			u64 cur_nice;
+			unsigned long cur_nice_jiffies;
+
+			cur_nice = kcpustat_cpu(j).cpustat[CPUTIME_NICE] -
+					 cdbs->prev_cpu_nice;
+			/*
+			 * Assumption: nice time between sampling periods will
+			 * be less than 2^32 jiffies for 32 bit sys
+			 */
+			cur_nice_jiffies = (unsigned long)
+					cputime64_to_jiffies64(cur_nice);
+
+			cdbs->prev_cpu_nice =
+				kcpustat_cpu(j).cpustat[CPUTIME_NICE];
+			idle_time += jiffies_to_usecs(cur_nice_jiffies);
+		}
+
+		if (dbs_data->governor == GOV_ONDEMAND) {
+			struct od_cpu_dbs_info_s *od_j_dbs_info =
+				dbs_data->get_cpu_dbs_info_s(cpu);
+
+			cur_iowait_time = get_cpu_iowait_time_us(j,
+					&cur_wall_time);
+			if (cur_iowait_time == -1ULL)
+				cur_iowait_time = 0;
+
+			iowait_time = (unsigned int) (cur_iowait_time -
+					od_j_dbs_info->prev_cpu_iowait);
+			od_j_dbs_info->prev_cpu_iowait = cur_iowait_time;
+
+			/*
+			 * For the purpose of ondemand, waiting for disk IO is
+			 * an indication that you're performance critical, and
+			 * not that the system is actually idle. So subtract the
+			 * iowait time from the cpu idle time.
+			 */
+			if (od_tuners->io_is_busy && idle_time >= iowait_time)
+				idle_time -= iowait_time;
+		}
+
+		if (unlikely(!wall_time || wall_time < idle_time))
+			continue;
+
+		load = 100 * (wall_time - idle_time) / wall_time;
+
+		if (dbs_data->governor == GOV_ONDEMAND) {
+			int freq_avg = __cpufreq_driver_getavg(policy, j);
+			if (freq_avg <= 0)
+				freq_avg = policy->cur;
+
+			load *= freq_avg;
+		}
+
+		if (load > max_load)
+			max_load = load;
+	}
+
+	dbs_data->gov_check_cpu(cpu, max_load);
+}
+EXPORT_SYMBOL_GPL(dbs_check_cpu);
+
+static inline void dbs_timer_init(struct dbs_data *dbs_data,
+		struct cpu_dbs_common_info *cdbs, unsigned int sampling_rate)
+{
+	int delay = delay_for_sampling_rate(sampling_rate);
+
+	INIT_DEFERRABLE_WORK(&cdbs->work, dbs_data->gov_dbs_timer);
+	schedule_delayed_work_on(cdbs->cpu, &cdbs->work, delay);
+}
+
+static inline void dbs_timer_exit(struct cpu_dbs_common_info *cdbs)
+{
+	cancel_delayed_work_sync(&cdbs->work);
+}
+
+int cpufreq_governor_dbs(struct dbs_data *dbs_data,
+		struct cpufreq_policy *policy, unsigned int event)
+{
+	struct od_cpu_dbs_info_s *od_dbs_info = NULL;
+	struct cs_cpu_dbs_info_s *cs_dbs_info = NULL;
+	struct od_dbs_tuners *od_tuners = dbs_data->tuners;
+	struct cs_dbs_tuners *cs_tuners = dbs_data->tuners;
+	struct cpu_dbs_common_info *cpu_cdbs;
+	unsigned int *sampling_rate, latency, ignore_nice, j, cpu = policy->cpu;
+	int rc;
+
+	cpu_cdbs = dbs_data->get_cpu_cdbs(cpu);
+
+	if (dbs_data->governor == GOV_CONSERVATIVE) {
+		cs_dbs_info = dbs_data->get_cpu_dbs_info_s(cpu);
+		sampling_rate = &cs_tuners->sampling_rate;
+		ignore_nice = cs_tuners->ignore_nice;
+	} else {
+		od_dbs_info = dbs_data->get_cpu_dbs_info_s(cpu);
+		sampling_rate = &od_tuners->sampling_rate;
+		ignore_nice = od_tuners->ignore_nice;
+	}
+
+	switch (event) {
+	case CPUFREQ_GOV_START:
+		if ((!cpu_online(cpu)) || (!policy->cur))
+			return -EINVAL;
+
+		mutex_lock(&dbs_data->mutex);
+
+		dbs_data->enable++;
+		cpu_cdbs->cpu = cpu;
+		for_each_cpu(j, policy->cpus) {
+			struct cpu_dbs_common_info *j_cdbs;
+			j_cdbs = dbs_data->get_cpu_cdbs(j);
+
+			j_cdbs->cur_policy = policy;
+			j_cdbs->prev_cpu_idle = get_cpu_idle_time(j,
+					&j_cdbs->prev_cpu_wall);
+			if (ignore_nice)
+				j_cdbs->prev_cpu_nice =
+					kcpustat_cpu(j).cpustat[CPUTIME_NICE];
+		}
+
+		/*
+		 * Start the timerschedule work, when this governor is used for
+		 * first time
+		 */
+		if (dbs_data->enable != 1)
+			goto second_time;
+
+		rc = sysfs_create_group(cpufreq_global_kobject,
+				dbs_data->attr_group);
+		if (rc) {
+			mutex_unlock(&dbs_data->mutex);
+			return rc;
+		}
+
+		/* policy latency is in nS. Convert it to uS first */
+		latency = policy->cpuinfo.transition_latency / 1000;
+		if (latency == 0)
+			latency = 1;
+
+		/*
+		 * conservative does not implement micro like ondemand
+		 * governor, thus we are bound to jiffes/HZ
+		 */
+		if (dbs_data->governor == GOV_CONSERVATIVE) {
+			struct cs_ops *ops = dbs_data->gov_ops;
+
+			cpufreq_register_notifier(ops->notifier_block,
+					CPUFREQ_TRANSITION_NOTIFIER);
+
+			dbs_data->min_sampling_rate = MIN_SAMPLING_RATE_RATIO *
+				jiffies_to_usecs(10);
+		} else {
+			struct od_ops *ops = dbs_data->gov_ops;
+
+			od_tuners->io_is_busy = ops->io_busy();
+		}
+
+		/* Bring kernel and HW constraints together */
+		dbs_data->min_sampling_rate = max(dbs_data->min_sampling_rate,
+				MIN_LATENCY_MULTIPLIER * latency);
+		*sampling_rate = max(dbs_data->min_sampling_rate, latency *
+				LATENCY_MULTIPLIER);
+
+second_time:
+		if (dbs_data->governor == GOV_CONSERVATIVE) {
+			cs_dbs_info->down_skip = 0;
+			cs_dbs_info->enable = 1;
+			cs_dbs_info->requested_freq = policy->cur;
+		} else {
+			struct od_ops *ops = dbs_data->gov_ops;
+			od_dbs_info->rate_mult = 1;
+			od_dbs_info->sample_type = OD_NORMAL_SAMPLE;
+			ops->powersave_bias_init_cpu(cpu);
+		}
+		mutex_unlock(&dbs_data->mutex);
+
+		mutex_init(&cpu_cdbs->timer_mutex);
+		dbs_timer_init(dbs_data, cpu_cdbs, *sampling_rate);
+		break;
+
+	case CPUFREQ_GOV_STOP:
+		if (dbs_data->governor == GOV_CONSERVATIVE)
+			cs_dbs_info->enable = 0;
+
+		dbs_timer_exit(cpu_cdbs);
+
+		mutex_lock(&dbs_data->mutex);
+		mutex_destroy(&cpu_cdbs->timer_mutex);
+		dbs_data->enable--;
+		if (!dbs_data->enable) {
+			struct cs_ops *ops = dbs_data->gov_ops;
+
+			sysfs_remove_group(cpufreq_global_kobject,
+					dbs_data->attr_group);
+			if (dbs_data->governor == GOV_CONSERVATIVE)
+				cpufreq_unregister_notifier(ops->notifier_block,
+						CPUFREQ_TRANSITION_NOTIFIER);
+		}
+		mutex_unlock(&dbs_data->mutex);
+
+		break;
+
+	case CPUFREQ_GOV_LIMITS:
+		mutex_lock(&cpu_cdbs->timer_mutex);
+		if (policy->max < cpu_cdbs->cur_policy->cur)
+			__cpufreq_driver_target(cpu_cdbs->cur_policy,
+					policy->max, CPUFREQ_RELATION_H);
+		else if (policy->min > cpu_cdbs->cur_policy->cur)
+			__cpufreq_driver_target(cpu_cdbs->cur_policy,
+					policy->min, CPUFREQ_RELATION_L);
+		dbs_check_cpu(dbs_data, cpu);
+		mutex_unlock(&cpu_cdbs->timer_mutex);
+		break;
+	}
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cpufreq_governor_dbs);
diff --git a/drivers/cpufreq/cpufreq_governor.h b/drivers/cpufreq/cpufreq_governor.h
new file mode 100644
index 0000000..f661654
--- /dev/null
+++ b/drivers/cpufreq/cpufreq_governor.h
@@ -0,0 +1,176 @@
+/*
+ * drivers/cpufreq/cpufreq_governor.h
+ *
+ * Header file for CPUFreq governors common code
+ *
+ * Copyright	(C) 2001 Russell King
+ *		(C) 2003 Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>.
+ *		(C) 2003 Jun Nakajima <jun.nakajima@intel.com>
+ *		(C) 2009 Alexander Clouter <alex@digriz.org.uk>
+ *		(c) 2012 Viresh Kumar <viresh.kumar@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _CPUFREQ_GOVERNER_H
+#define _CPUFREQ_GOVERNER_H
+
+#include <linux/cpufreq.h>
+#include <linux/kobject.h>
+#include <linux/mutex.h>
+#include <linux/workqueue.h>
+#include <linux/sysfs.h>
+
+/*
+ * The polling frequency depends on the capability of the processor. Default
+ * polling frequency is 1000 times the transition latency of the processor. The
+ * governor will work on any processor with transition latency <= 10mS, using
+ * appropriate sampling rate.
+ *
+ * For CPUs with transition latency > 10mS (mostly drivers with CPUFREQ_ETERNAL)
+ * this governor will not work. All times here are in uS.
+ */
+#define MIN_SAMPLING_RATE_RATIO			(2)
+#define LATENCY_MULTIPLIER			(1000)
+#define MIN_LATENCY_MULTIPLIER			(100)
+#define TRANSITION_LATENCY_LIMIT		(10 * 1000 * 1000)
+
+/* Ondemand Sampling types */
+enum {OD_NORMAL_SAMPLE, OD_SUB_SAMPLE};
+
+/* Macro creating sysfs show routines */
+#define show_one(_gov, file_name, object)				\
+static ssize_t show_##file_name						\
+(struct kobject *kobj, struct attribute *attr, char *buf)		\
+{									\
+	return sprintf(buf, "%u\n", _gov##_tuners.object);		\
+}
+
+#define define_get_cpu_dbs_routines(_dbs_info)				\
+static struct cpu_dbs_common_info *get_cpu_cdbs(int cpu)		\
+{									\
+	return &per_cpu(_dbs_info, cpu).cdbs;				\
+}									\
+									\
+static void *get_cpu_dbs_info_s(int cpu)				\
+{									\
+	return &per_cpu(_dbs_info, cpu);				\
+}
+
+/*
+ * Abbreviations:
+ * dbs: used as a shortform for demand based switching It helps to keep variable
+ *	names smaller, simpler
+ * cdbs: common dbs
+ * on_*: On-demand governor
+ * cs_*: Conservative governor
+ */
+
+/* Per cpu structures */
+struct cpu_dbs_common_info {
+	int cpu;
+	u64 prev_cpu_idle;
+	u64 prev_cpu_wall;
+	u64 prev_cpu_nice;
+	struct cpufreq_policy *cur_policy;
+	struct delayed_work work;
+	/*
+	 * percpu mutex that serializes governor limit change with gov_dbs_timer
+	 * invocation. We do not want gov_dbs_timer to run when user is changing
+	 * the governor or limits.
+	 */
+	struct mutex timer_mutex;
+};
+
+struct od_cpu_dbs_info_s {
+	struct cpu_dbs_common_info cdbs;
+	u64 prev_cpu_iowait;
+	struct cpufreq_frequency_table *freq_table;
+	unsigned int freq_lo;
+	unsigned int freq_lo_jiffies;
+	unsigned int freq_hi_jiffies;
+	unsigned int rate_mult;
+	unsigned int sample_type:1;
+};
+
+struct cs_cpu_dbs_info_s {
+	struct cpu_dbs_common_info cdbs;
+	unsigned int down_skip;
+	unsigned int requested_freq;
+	unsigned int enable:1;
+};
+
+/* Governers sysfs tunables */
+struct od_dbs_tuners {
+	unsigned int ignore_nice;
+	unsigned int sampling_rate;
+	unsigned int sampling_down_factor;
+	unsigned int up_threshold;
+	unsigned int down_differential;
+	unsigned int powersave_bias;
+	unsigned int io_is_busy;
+};
+
+struct cs_dbs_tuners {
+	unsigned int ignore_nice;
+	unsigned int sampling_rate;
+	unsigned int sampling_down_factor;
+	unsigned int up_threshold;
+	unsigned int down_threshold;
+	unsigned int freq_step;
+};
+
+/* Per Governer data */
+struct dbs_data {
+	/* Common across governors */
+	#define GOV_ONDEMAND		0
+	#define GOV_CONSERVATIVE	1
+	int governor;
+	unsigned int min_sampling_rate;
+	unsigned int enable; /* number of CPUs using this policy */
+	struct attribute_group *attr_group;
+	void *tuners;
+
+	/* dbs_mutex protects dbs_enable in governor start/stop */
+	struct mutex mutex;
+
+	struct cpu_dbs_common_info *(*get_cpu_cdbs)(int cpu);
+	void *(*get_cpu_dbs_info_s)(int cpu);
+	void (*gov_dbs_timer)(struct work_struct *work);
+	void (*gov_check_cpu)(int cpu, unsigned int load);
+
+	/* Governor specific ops, see below */
+	void *gov_ops;
+};
+
+/* Governor specific ops, will be passed to dbs_data->gov_ops */
+struct od_ops {
+	int (*io_busy)(void);
+	void (*powersave_bias_init_cpu)(int cpu);
+	unsigned int (*powersave_bias_target)(struct cpufreq_policy *policy,
+			unsigned int freq_next, unsigned int relation);
+	void (*freq_increase)(struct cpufreq_policy *p, unsigned int freq);
+};
+
+struct cs_ops {
+	struct notifier_block *notifier_block;
+};
+
+static inline int delay_for_sampling_rate(unsigned int sampling_rate)
+{
+	int delay = usecs_to_jiffies(sampling_rate);
+
+	/* We want all CPUs to do sampling nearly on same jiffy */
+	if (num_online_cpus() > 1)
+		delay -= jiffies % delay;
+
+	return delay;
+}
+
+u64 get_cpu_idle_time(unsigned int cpu, u64 *wall);
+void dbs_check_cpu(struct dbs_data *dbs_data, int cpu);
+int cpufreq_governor_dbs(struct dbs_data *dbs_data,
+		struct cpufreq_policy *policy, unsigned int event);
+#endif /* _CPUFREQ_GOVERNER_H */
diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c
index 396322f..7731f7c 100644
--- a/drivers/cpufreq/cpufreq_ondemand.c
+++ b/drivers/cpufreq/cpufreq_ondemand.c
@@ -10,24 +10,23 @@
  * published by the Free Software Foundation.
  */
 
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/cpufreq.h>
-#include <linux/cpu.h>
-#include <linux/jiffies.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
 #include <linux/kernel_stat.h>
+#include <linux/kobject.h>
+#include <linux/module.h>
 #include <linux/mutex.h>
-#include <linux/hrtimer.h>
+#include <linux/percpu-defs.h>
+#include <linux/sysfs.h>
 #include <linux/tick.h>
-#include <linux/ktime.h>
-#include <linux/sched.h>
+#include <linux/types.h>
 
-/*
- * dbs is used in this file as a shortform for demandbased switching
- * It helps to keep variable names smaller, simpler
- */
+#include "cpufreq_governor.h"
 
+/* On-demand governor macors */
 #define DEF_FREQUENCY_DOWN_DIFFERENTIAL		(10)
 #define DEF_FREQUENCY_UP_THRESHOLD		(80)
 #define DEF_SAMPLING_DOWN_FACTOR		(1)
@@ -38,80 +37,14 @@
 #define MIN_FREQUENCY_UP_THRESHOLD		(11)
 #define MAX_FREQUENCY_UP_THRESHOLD		(100)
 
-/*
- * The polling frequency of this governor depends on the capability of
- * the processor. Default polling frequency is 1000 times the transition
- * latency of the processor. The governor will work on any processor with
- * transition latency <= 10mS, using appropriate sampling
- * rate.
- * For CPUs with transition latency > 10mS (mostly drivers with CPUFREQ_ETERNAL)
- * this governor will not work.
- * All times here are in uS.
- */
-#define MIN_SAMPLING_RATE_RATIO			(2)
-
-static unsigned int min_sampling_rate;
-
-#define LATENCY_MULTIPLIER			(1000)
-#define MIN_LATENCY_MULTIPLIER			(100)
-#define TRANSITION_LATENCY_LIMIT		(10 * 1000 * 1000)
-
-static void do_dbs_timer(struct work_struct *work);
-static int cpufreq_governor_dbs(struct cpufreq_policy *policy,
-				unsigned int event);
+static struct dbs_data od_dbs_data;
+static DEFINE_PER_CPU(struct od_cpu_dbs_info_s, od_cpu_dbs_info);
 
 #ifndef CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND
-static
+static struct cpufreq_governor cpufreq_gov_ondemand;
 #endif
-struct cpufreq_governor cpufreq_gov_ondemand = {
-       .name                   = "ondemand",
-       .governor               = cpufreq_governor_dbs,
-       .max_transition_latency = TRANSITION_LATENCY_LIMIT,
-       .owner                  = THIS_MODULE,
-};
 
-/* Sampling types */
-enum {DBS_NORMAL_SAMPLE, DBS_SUB_SAMPLE};
-
-struct cpu_dbs_info_s {
-	cputime64_t prev_cpu_idle;
-	cputime64_t prev_cpu_iowait;
-	cputime64_t prev_cpu_wall;
-	cputime64_t prev_cpu_nice;
-	struct cpufreq_policy *cur_policy;
-	struct delayed_work work;
-	struct cpufreq_frequency_table *freq_table;
-	unsigned int freq_lo;
-	unsigned int freq_lo_jiffies;
-	unsigned int freq_hi_jiffies;
-	unsigned int rate_mult;
-	int cpu;
-	unsigned int sample_type:1;
-	/*
-	 * percpu mutex that serializes governor limit change with
-	 * do_dbs_timer invocation. We do not want do_dbs_timer to run
-	 * when user is changing the governor or limits.
-	 */
-	struct mutex timer_mutex;
-};
-static DEFINE_PER_CPU(struct cpu_dbs_info_s, od_cpu_dbs_info);
-
-static unsigned int dbs_enable;	/* number of CPUs using this policy */
-
-/*
- * dbs_mutex protects dbs_enable in governor start/stop.
- */
-static DEFINE_MUTEX(dbs_mutex);
-
-static struct dbs_tuners {
-	unsigned int sampling_rate;
-	unsigned int up_threshold;
-	unsigned int down_differential;
-	unsigned int ignore_nice;
-	unsigned int sampling_down_factor;
-	unsigned int powersave_bias;
-	unsigned int io_is_busy;
-} dbs_tuners_ins = {
+static struct od_dbs_tuners od_tuners = {
 	.up_threshold = DEF_FREQUENCY_UP_THRESHOLD,
 	.sampling_down_factor = DEF_SAMPLING_DOWN_FACTOR,
 	.down_differential = DEF_FREQUENCY_DOWN_DIFFERENTIAL,
@@ -119,48 +52,35 @@
 	.powersave_bias = 0,
 };
 
-static inline u64 get_cpu_idle_time_jiffy(unsigned int cpu, u64 *wall)
+static void ondemand_powersave_bias_init_cpu(int cpu)
 {
-	u64 idle_time;
-	u64 cur_wall_time;
-	u64 busy_time;
+	struct od_cpu_dbs_info_s *dbs_info = &per_cpu(od_cpu_dbs_info, cpu);
 
-	cur_wall_time = jiffies64_to_cputime64(get_jiffies_64());
-
-	busy_time  = kcpustat_cpu(cpu).cpustat[CPUTIME_USER];
-	busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_SYSTEM];
-	busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_IRQ];
-	busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_SOFTIRQ];
-	busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_STEAL];
-	busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_NICE];
-
-	idle_time = cur_wall_time - busy_time;
-	if (wall)
-		*wall = jiffies_to_usecs(cur_wall_time);
-
-	return jiffies_to_usecs(idle_time);
+	dbs_info->freq_table = cpufreq_frequency_get_table(cpu);
+	dbs_info->freq_lo = 0;
 }
 
-static inline cputime64_t get_cpu_idle_time(unsigned int cpu, cputime64_t *wall)
+/*
+ * Not all CPUs want IO time to be accounted as busy; this depends on how
+ * efficient idling at a higher frequency/voltage is.
+ * Pavel Machek says this is not so for various generations of AMD and old
+ * Intel systems.
+ * Mike Chan (androidlcom) calis this is also not true for ARM.
+ * Because of this, whitelist specific known (series) of CPUs by default, and
+ * leave all others up to the user.
+ */
+static int should_io_be_busy(void)
 {
-	u64 idle_time = get_cpu_idle_time_us(cpu, NULL);
-
-	if (idle_time == -1ULL)
-		return get_cpu_idle_time_jiffy(cpu, wall);
-	else
-		idle_time += get_cpu_iowait_time_us(cpu, wall);
-
-	return idle_time;
-}
-
-static inline cputime64_t get_cpu_iowait_time(unsigned int cpu, cputime64_t *wall)
-{
-	u64 iowait_time = get_cpu_iowait_time_us(cpu, wall);
-
-	if (iowait_time == -1ULL)
-		return 0;
-
-	return iowait_time;
+#if defined(CONFIG_X86)
+	/*
+	 * For Intel, Core 2 (model 15) andl later have an efficient idle.
+	 */
+	if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL &&
+			boot_cpu_data.x86 == 6 &&
+			boot_cpu_data.x86_model >= 15)
+		return 1;
+#endif
+	return 0;
 }
 
 /*
@@ -169,14 +89,13 @@
  * freq_lo, and freq_lo_jiffies in percpu area for averaging freqs.
  */
 static unsigned int powersave_bias_target(struct cpufreq_policy *policy,
-					  unsigned int freq_next,
-					  unsigned int relation)
+		unsigned int freq_next, unsigned int relation)
 {
 	unsigned int freq_req, freq_reduc, freq_avg;
 	unsigned int freq_hi, freq_lo;
 	unsigned int index = 0;
 	unsigned int jiffies_total, jiffies_hi, jiffies_lo;
-	struct cpu_dbs_info_s *dbs_info = &per_cpu(od_cpu_dbs_info,
+	struct od_cpu_dbs_info_s *dbs_info = &per_cpu(od_cpu_dbs_info,
 						   policy->cpu);
 
 	if (!dbs_info->freq_table) {
@@ -188,7 +107,7 @@
 	cpufreq_frequency_table_target(policy, dbs_info->freq_table, freq_next,
 			relation, &index);
 	freq_req = dbs_info->freq_table[index].frequency;
-	freq_reduc = freq_req * dbs_tuners_ins.powersave_bias / 1000;
+	freq_reduc = freq_req * od_tuners.powersave_bias / 1000;
 	freq_avg = freq_req - freq_reduc;
 
 	/* Find freq bounds for freq_avg in freq_table */
@@ -207,7 +126,7 @@
 		dbs_info->freq_lo_jiffies = 0;
 		return freq_lo;
 	}
-	jiffies_total = usecs_to_jiffies(dbs_tuners_ins.sampling_rate);
+	jiffies_total = usecs_to_jiffies(od_tuners.sampling_rate);
 	jiffies_hi = (freq_avg - freq_lo) * jiffies_total;
 	jiffies_hi += ((freq_hi - freq_lo) / 2);
 	jiffies_hi /= (freq_hi - freq_lo);
@@ -218,13 +137,6 @@
 	return freq_hi;
 }
 
-static void ondemand_powersave_bias_init_cpu(int cpu)
-{
-	struct cpu_dbs_info_s *dbs_info = &per_cpu(od_cpu_dbs_info, cpu);
-	dbs_info->freq_table = cpufreq_frequency_get_table(cpu);
-	dbs_info->freq_lo = 0;
-}
-
 static void ondemand_powersave_bias_init(void)
 {
 	int i;
@@ -233,83 +145,173 @@
 	}
 }
 
+static void dbs_freq_increase(struct cpufreq_policy *p, unsigned int freq)
+{
+	if (od_tuners.powersave_bias)
+		freq = powersave_bias_target(p, freq, CPUFREQ_RELATION_H);
+	else if (p->cur == p->max)
+		return;
+
+	__cpufreq_driver_target(p, freq, od_tuners.powersave_bias ?
+			CPUFREQ_RELATION_L : CPUFREQ_RELATION_H);
+}
+
+/*
+ * Every sampling_rate, we check, if current idle time is less than 20%
+ * (default), then we try to increase frequency Every sampling_rate, we look for
+ * a the lowest frequency which can sustain the load while keeping idle time
+ * over 30%. If such a frequency exist, we try to decrease to this frequency.
+ *
+ * Any frequency increase takes it to the maximum frequency. Frequency reduction
+ * happens at minimum steps of 5% (default) of current frequency
+ */
+static void od_check_cpu(int cpu, unsigned int load_freq)
+{
+	struct od_cpu_dbs_info_s *dbs_info = &per_cpu(od_cpu_dbs_info, cpu);
+	struct cpufreq_policy *policy = dbs_info->cdbs.cur_policy;
+
+	dbs_info->freq_lo = 0;
+
+	/* Check for frequency increase */
+	if (load_freq > od_tuners.up_threshold * policy->cur) {
+		/* If switching to max speed, apply sampling_down_factor */
+		if (policy->cur < policy->max)
+			dbs_info->rate_mult =
+				od_tuners.sampling_down_factor;
+		dbs_freq_increase(policy, policy->max);
+		return;
+	}
+
+	/* Check for frequency decrease */
+	/* if we cannot reduce the frequency anymore, break out early */
+	if (policy->cur == policy->min)
+		return;
+
+	/*
+	 * The optimal frequency is the frequency that is the lowest that can
+	 * support the current CPU usage without triggering the up policy. To be
+	 * safe, we focus 10 points under the threshold.
+	 */
+	if (load_freq < (od_tuners.up_threshold - od_tuners.down_differential) *
+			policy->cur) {
+		unsigned int freq_next;
+		freq_next = load_freq / (od_tuners.up_threshold -
+				od_tuners.down_differential);
+
+		/* No longer fully busy, reset rate_mult */
+		dbs_info->rate_mult = 1;
+
+		if (freq_next < policy->min)
+			freq_next = policy->min;
+
+		if (!od_tuners.powersave_bias) {
+			__cpufreq_driver_target(policy, freq_next,
+					CPUFREQ_RELATION_L);
+		} else {
+			int freq = powersave_bias_target(policy, freq_next,
+					CPUFREQ_RELATION_L);
+			__cpufreq_driver_target(policy, freq,
+					CPUFREQ_RELATION_L);
+		}
+	}
+}
+
+static void od_dbs_timer(struct work_struct *work)
+{
+	struct od_cpu_dbs_info_s *dbs_info =
+		container_of(work, struct od_cpu_dbs_info_s, cdbs.work.work);
+	unsigned int cpu = dbs_info->cdbs.cpu;
+	int delay, sample_type = dbs_info->sample_type;
+
+	mutex_lock(&dbs_info->cdbs.timer_mutex);
+
+	/* Common NORMAL_SAMPLE setup */
+	dbs_info->sample_type = OD_NORMAL_SAMPLE;
+	if (sample_type == OD_SUB_SAMPLE) {
+		delay = dbs_info->freq_lo_jiffies;
+		__cpufreq_driver_target(dbs_info->cdbs.cur_policy,
+			dbs_info->freq_lo, CPUFREQ_RELATION_H);
+	} else {
+		dbs_check_cpu(&od_dbs_data, cpu);
+		if (dbs_info->freq_lo) {
+			/* Setup timer for SUB_SAMPLE */
+			dbs_info->sample_type = OD_SUB_SAMPLE;
+			delay = dbs_info->freq_hi_jiffies;
+		} else {
+			delay = delay_for_sampling_rate(od_tuners.sampling_rate
+						* dbs_info->rate_mult);
+		}
+	}
+
+	schedule_delayed_work_on(cpu, &dbs_info->cdbs.work, delay);
+	mutex_unlock(&dbs_info->cdbs.timer_mutex);
+}
+
 /************************** sysfs interface ************************/
 
 static ssize_t show_sampling_rate_min(struct kobject *kobj,
 				      struct attribute *attr, char *buf)
 {
-	return sprintf(buf, "%u\n", min_sampling_rate);
+	return sprintf(buf, "%u\n", od_dbs_data.min_sampling_rate);
 }
 
-define_one_global_ro(sampling_rate_min);
-
-/* cpufreq_ondemand Governor Tunables */
-#define show_one(file_name, object)					\
-static ssize_t show_##file_name						\
-(struct kobject *kobj, struct attribute *attr, char *buf)              \
-{									\
-	return sprintf(buf, "%u\n", dbs_tuners_ins.object);		\
-}
-show_one(sampling_rate, sampling_rate);
-show_one(io_is_busy, io_is_busy);
-show_one(up_threshold, up_threshold);
-show_one(sampling_down_factor, sampling_down_factor);
-show_one(ignore_nice_load, ignore_nice);
-show_one(powersave_bias, powersave_bias);
-
 /**
  * update_sampling_rate - update sampling rate effective immediately if needed.
  * @new_rate: new sampling rate
  *
  * If new rate is smaller than the old, simply updaing
- * dbs_tuners_int.sampling_rate might not be appropriate. For example,
- * if the original sampling_rate was 1 second and the requested new sampling
- * rate is 10 ms because the user needs immediate reaction from ondemand
- * governor, but not sure if higher frequency will be required or not,
- * then, the governor may change the sampling rate too late; up to 1 second
- * later. Thus, if we are reducing the sampling rate, we need to make the
- * new value effective immediately.
+ * dbs_tuners_int.sampling_rate might not be appropriate. For example, if the
+ * original sampling_rate was 1 second and the requested new sampling rate is 10
+ * ms because the user needs immediate reaction from ondemand governor, but not
+ * sure if higher frequency will be required or not, then, the governor may
+ * change the sampling rate too late; up to 1 second later. Thus, if we are
+ * reducing the sampling rate, we need to make the new value effective
+ * immediately.
  */
 static void update_sampling_rate(unsigned int new_rate)
 {
 	int cpu;
 
-	dbs_tuners_ins.sampling_rate = new_rate
-				     = max(new_rate, min_sampling_rate);
+	od_tuners.sampling_rate = new_rate = max(new_rate,
+			od_dbs_data.min_sampling_rate);
 
 	for_each_online_cpu(cpu) {
 		struct cpufreq_policy *policy;
-		struct cpu_dbs_info_s *dbs_info;
+		struct od_cpu_dbs_info_s *dbs_info;
 		unsigned long next_sampling, appointed_at;
 
 		policy = cpufreq_cpu_get(cpu);
 		if (!policy)
 			continue;
+		if (policy->governor != &cpufreq_gov_ondemand) {
+			cpufreq_cpu_put(policy);
+			continue;
+		}
 		dbs_info = &per_cpu(od_cpu_dbs_info, policy->cpu);
 		cpufreq_cpu_put(policy);
 
-		mutex_lock(&dbs_info->timer_mutex);
+		mutex_lock(&dbs_info->cdbs.timer_mutex);
 
-		if (!delayed_work_pending(&dbs_info->work)) {
-			mutex_unlock(&dbs_info->timer_mutex);
+		if (!delayed_work_pending(&dbs_info->cdbs.work)) {
+			mutex_unlock(&dbs_info->cdbs.timer_mutex);
 			continue;
 		}
 
-		next_sampling  = jiffies + usecs_to_jiffies(new_rate);
-		appointed_at = dbs_info->work.timer.expires;
-
+		next_sampling = jiffies + usecs_to_jiffies(new_rate);
+		appointed_at = dbs_info->cdbs.work.timer.expires;
 
 		if (time_before(next_sampling, appointed_at)) {
 
-			mutex_unlock(&dbs_info->timer_mutex);
-			cancel_delayed_work_sync(&dbs_info->work);
-			mutex_lock(&dbs_info->timer_mutex);
+			mutex_unlock(&dbs_info->cdbs.timer_mutex);
+			cancel_delayed_work_sync(&dbs_info->cdbs.work);
+			mutex_lock(&dbs_info->cdbs.timer_mutex);
 
-			schedule_delayed_work_on(dbs_info->cpu, &dbs_info->work,
-						 usecs_to_jiffies(new_rate));
+			schedule_delayed_work_on(dbs_info->cdbs.cpu,
+					&dbs_info->cdbs.work,
+					usecs_to_jiffies(new_rate));
 
 		}
-		mutex_unlock(&dbs_info->timer_mutex);
+		mutex_unlock(&dbs_info->cdbs.timer_mutex);
 	}
 }
 
@@ -334,7 +336,7 @@
 	ret = sscanf(buf, "%u", &input);
 	if (ret != 1)
 		return -EINVAL;
-	dbs_tuners_ins.io_is_busy = !!input;
+	od_tuners.io_is_busy = !!input;
 	return count;
 }
 
@@ -349,7 +351,7 @@
 			input < MIN_FREQUENCY_UP_THRESHOLD) {
 		return -EINVAL;
 	}
-	dbs_tuners_ins.up_threshold = input;
+	od_tuners.up_threshold = input;
 	return count;
 }
 
@@ -362,12 +364,12 @@
 
 	if (ret != 1 || input > MAX_SAMPLING_DOWN_FACTOR || input < 1)
 		return -EINVAL;
-	dbs_tuners_ins.sampling_down_factor = input;
+	od_tuners.sampling_down_factor = input;
 
 	/* Reset down sampling multiplier in case it was active */
 	for_each_online_cpu(j) {
-		struct cpu_dbs_info_s *dbs_info;
-		dbs_info = &per_cpu(od_cpu_dbs_info, j);
+		struct od_cpu_dbs_info_s *dbs_info = &per_cpu(od_cpu_dbs_info,
+				j);
 		dbs_info->rate_mult = 1;
 	}
 	return count;
@@ -388,19 +390,20 @@
 	if (input > 1)
 		input = 1;
 
-	if (input == dbs_tuners_ins.ignore_nice) { /* nothing to do */
+	if (input == od_tuners.ignore_nice) { /* nothing to do */
 		return count;
 	}
-	dbs_tuners_ins.ignore_nice = input;
+	od_tuners.ignore_nice = input;
 
 	/* we need to re-evaluate prev_cpu_idle */
 	for_each_online_cpu(j) {
-		struct cpu_dbs_info_s *dbs_info;
+		struct od_cpu_dbs_info_s *dbs_info;
 		dbs_info = &per_cpu(od_cpu_dbs_info, j);
-		dbs_info->prev_cpu_idle = get_cpu_idle_time(j,
-						&dbs_info->prev_cpu_wall);
-		if (dbs_tuners_ins.ignore_nice)
-			dbs_info->prev_cpu_nice = kcpustat_cpu(j).cpustat[CPUTIME_NICE];
+		dbs_info->cdbs.prev_cpu_idle = get_cpu_idle_time(j,
+						&dbs_info->cdbs.prev_cpu_wall);
+		if (od_tuners.ignore_nice)
+			dbs_info->cdbs.prev_cpu_nice =
+				kcpustat_cpu(j).cpustat[CPUTIME_NICE];
 
 	}
 	return count;
@@ -419,17 +422,25 @@
 	if (input > 1000)
 		input = 1000;
 
-	dbs_tuners_ins.powersave_bias = input;
+	od_tuners.powersave_bias = input;
 	ondemand_powersave_bias_init();
 	return count;
 }
 
+show_one(od, sampling_rate, sampling_rate);
+show_one(od, io_is_busy, io_is_busy);
+show_one(od, up_threshold, up_threshold);
+show_one(od, sampling_down_factor, sampling_down_factor);
+show_one(od, ignore_nice_load, ignore_nice);
+show_one(od, powersave_bias, powersave_bias);
+
 define_one_global_rw(sampling_rate);
 define_one_global_rw(io_is_busy);
 define_one_global_rw(up_threshold);
 define_one_global_rw(sampling_down_factor);
 define_one_global_rw(ignore_nice_load);
 define_one_global_rw(powersave_bias);
+define_one_global_ro(sampling_rate_min);
 
 static struct attribute *dbs_attributes[] = {
 	&sampling_rate_min.attr,
@@ -442,354 +453,71 @@
 	NULL
 };
 
-static struct attribute_group dbs_attr_group = {
+static struct attribute_group od_attr_group = {
 	.attrs = dbs_attributes,
 	.name = "ondemand",
 };
 
 /************************** sysfs end ************************/
 
-static void dbs_freq_increase(struct cpufreq_policy *p, unsigned int freq)
-{
-	if (dbs_tuners_ins.powersave_bias)
-		freq = powersave_bias_target(p, freq, CPUFREQ_RELATION_H);
-	else if (p->cur == p->max)
-		return;
+define_get_cpu_dbs_routines(od_cpu_dbs_info);
 
-	__cpufreq_driver_target(p, freq, dbs_tuners_ins.powersave_bias ?
-			CPUFREQ_RELATION_L : CPUFREQ_RELATION_H);
+static struct od_ops od_ops = {
+	.io_busy = should_io_be_busy,
+	.powersave_bias_init_cpu = ondemand_powersave_bias_init_cpu,
+	.powersave_bias_target = powersave_bias_target,
+	.freq_increase = dbs_freq_increase,
+};
+
+static struct dbs_data od_dbs_data = {
+	.governor = GOV_ONDEMAND,
+	.attr_group = &od_attr_group,
+	.tuners = &od_tuners,
+	.get_cpu_cdbs = get_cpu_cdbs,
+	.get_cpu_dbs_info_s = get_cpu_dbs_info_s,
+	.gov_dbs_timer = od_dbs_timer,
+	.gov_check_cpu = od_check_cpu,
+	.gov_ops = &od_ops,
+};
+
+static int od_cpufreq_governor_dbs(struct cpufreq_policy *policy,
+		unsigned int event)
+{
+	return cpufreq_governor_dbs(&od_dbs_data, policy, event);
 }
 
-static void dbs_check_cpu(struct cpu_dbs_info_s *this_dbs_info)
-{
-	unsigned int max_load_freq;
-
-	struct cpufreq_policy *policy;
-	unsigned int j;
-
-	this_dbs_info->freq_lo = 0;
-	policy = this_dbs_info->cur_policy;
-
-	/*
-	 * Every sampling_rate, we check, if current idle time is less
-	 * than 20% (default), then we try to increase frequency
-	 * Every sampling_rate, we look for a the lowest
-	 * frequency which can sustain the load while keeping idle time over
-	 * 30%. If such a frequency exist, we try to decrease to this frequency.
-	 *
-	 * Any frequency increase takes it to the maximum frequency.
-	 * Frequency reduction happens at minimum steps of
-	 * 5% (default) of current frequency
-	 */
-
-	/* Get Absolute Load - in terms of freq */
-	max_load_freq = 0;
-
-	for_each_cpu(j, policy->cpus) {
-		struct cpu_dbs_info_s *j_dbs_info;
-		cputime64_t cur_wall_time, cur_idle_time, cur_iowait_time;
-		unsigned int idle_time, wall_time, iowait_time;
-		unsigned int load, load_freq;
-		int freq_avg;
-
-		j_dbs_info = &per_cpu(od_cpu_dbs_info, j);
-
-		cur_idle_time = get_cpu_idle_time(j, &cur_wall_time);
-		cur_iowait_time = get_cpu_iowait_time(j, &cur_wall_time);
-
-		wall_time = (unsigned int)
-			(cur_wall_time - j_dbs_info->prev_cpu_wall);
-		j_dbs_info->prev_cpu_wall = cur_wall_time;
-
-		idle_time = (unsigned int)
-			(cur_idle_time - j_dbs_info->prev_cpu_idle);
-		j_dbs_info->prev_cpu_idle = cur_idle_time;
-
-		iowait_time = (unsigned int)
-			(cur_iowait_time - j_dbs_info->prev_cpu_iowait);
-		j_dbs_info->prev_cpu_iowait = cur_iowait_time;
-
-		if (dbs_tuners_ins.ignore_nice) {
-			u64 cur_nice;
-			unsigned long cur_nice_jiffies;
-
-			cur_nice = kcpustat_cpu(j).cpustat[CPUTIME_NICE] -
-					 j_dbs_info->prev_cpu_nice;
-			/*
-			 * Assumption: nice time between sampling periods will
-			 * be less than 2^32 jiffies for 32 bit sys
-			 */
-			cur_nice_jiffies = (unsigned long)
-					cputime64_to_jiffies64(cur_nice);
-
-			j_dbs_info->prev_cpu_nice = kcpustat_cpu(j).cpustat[CPUTIME_NICE];
-			idle_time += jiffies_to_usecs(cur_nice_jiffies);
-		}
-
-		/*
-		 * For the purpose of ondemand, waiting for disk IO is an
-		 * indication that you're performance critical, and not that
-		 * the system is actually idle. So subtract the iowait time
-		 * from the cpu idle time.
-		 */
-
-		if (dbs_tuners_ins.io_is_busy && idle_time >= iowait_time)
-			idle_time -= iowait_time;
-
-		if (unlikely(!wall_time || wall_time < idle_time))
-			continue;
-
-		load = 100 * (wall_time - idle_time) / wall_time;
-
-		freq_avg = __cpufreq_driver_getavg(policy, j);
-		if (freq_avg <= 0)
-			freq_avg = policy->cur;
-
-		load_freq = load * freq_avg;
-		if (load_freq > max_load_freq)
-			max_load_freq = load_freq;
-	}
-
-	/* Check for frequency increase */
-	if (max_load_freq > dbs_tuners_ins.up_threshold * policy->cur) {
-		/* If switching to max speed, apply sampling_down_factor */
-		if (policy->cur < policy->max)
-			this_dbs_info->rate_mult =
-				dbs_tuners_ins.sampling_down_factor;
-		dbs_freq_increase(policy, policy->max);
-		return;
-	}
-
-	/* Check for frequency decrease */
-	/* if we cannot reduce the frequency anymore, break out early */
-	if (policy->cur == policy->min)
-		return;
-
-	/*
-	 * The optimal frequency is the frequency that is the lowest that
-	 * can support the current CPU usage without triggering the up
-	 * policy. To be safe, we focus 10 points under the threshold.
-	 */
-	if (max_load_freq <
-	    (dbs_tuners_ins.up_threshold - dbs_tuners_ins.down_differential) *
-	     policy->cur) {
-		unsigned int freq_next;
-		freq_next = max_load_freq /
-				(dbs_tuners_ins.up_threshold -
-				 dbs_tuners_ins.down_differential);
-
-		/* No longer fully busy, reset rate_mult */
-		this_dbs_info->rate_mult = 1;
-
-		if (freq_next < policy->min)
-			freq_next = policy->min;
-
-		if (!dbs_tuners_ins.powersave_bias) {
-			__cpufreq_driver_target(policy, freq_next,
-					CPUFREQ_RELATION_L);
-		} else {
-			int freq = powersave_bias_target(policy, freq_next,
-					CPUFREQ_RELATION_L);
-			__cpufreq_driver_target(policy, freq,
-				CPUFREQ_RELATION_L);
-		}
-	}
-}
-
-static void do_dbs_timer(struct work_struct *work)
-{
-	struct cpu_dbs_info_s *dbs_info =
-		container_of(work, struct cpu_dbs_info_s, work.work);
-	unsigned int cpu = dbs_info->cpu;
-	int sample_type = dbs_info->sample_type;
-
-	int delay;
-
-	mutex_lock(&dbs_info->timer_mutex);
-
-	/* Common NORMAL_SAMPLE setup */
-	dbs_info->sample_type = DBS_NORMAL_SAMPLE;
-	if (!dbs_tuners_ins.powersave_bias ||
-	    sample_type == DBS_NORMAL_SAMPLE) {
-		dbs_check_cpu(dbs_info);
-		if (dbs_info->freq_lo) {
-			/* Setup timer for SUB_SAMPLE */
-			dbs_info->sample_type = DBS_SUB_SAMPLE;
-			delay = dbs_info->freq_hi_jiffies;
-		} else {
-			/* We want all CPUs to do sampling nearly on
-			 * same jiffy
-			 */
-			delay = usecs_to_jiffies(dbs_tuners_ins.sampling_rate
-				* dbs_info->rate_mult);
-
-			if (num_online_cpus() > 1)
-				delay -= jiffies % delay;
-		}
-	} else {
-		__cpufreq_driver_target(dbs_info->cur_policy,
-			dbs_info->freq_lo, CPUFREQ_RELATION_H);
-		delay = dbs_info->freq_lo_jiffies;
-	}
-	schedule_delayed_work_on(cpu, &dbs_info->work, delay);
-	mutex_unlock(&dbs_info->timer_mutex);
-}
-
-static inline void dbs_timer_init(struct cpu_dbs_info_s *dbs_info)
-{
-	/* We want all CPUs to do sampling nearly on same jiffy */
-	int delay = usecs_to_jiffies(dbs_tuners_ins.sampling_rate);
-
-	if (num_online_cpus() > 1)
-		delay -= jiffies % delay;
-
-	dbs_info->sample_type = DBS_NORMAL_SAMPLE;
-	INIT_DEFERRABLE_WORK(&dbs_info->work, do_dbs_timer);
-	schedule_delayed_work_on(dbs_info->cpu, &dbs_info->work, delay);
-}
-
-static inline void dbs_timer_exit(struct cpu_dbs_info_s *dbs_info)
-{
-	cancel_delayed_work_sync(&dbs_info->work);
-}
-
-/*
- * Not all CPUs want IO time to be accounted as busy; this dependson how
- * efficient idling at a higher frequency/voltage is.
- * Pavel Machek says this is not so for various generations of AMD and old
- * Intel systems.
- * Mike Chan (androidlcom) calis this is also not true for ARM.
- * Because of this, whitelist specific known (series) of CPUs by default, and
- * leave all others up to the user.
- */
-static int should_io_be_busy(void)
-{
-#if defined(CONFIG_X86)
-	/*
-	 * For Intel, Core 2 (model 15) andl later have an efficient idle.
-	 */
-	if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL &&
-	    boot_cpu_data.x86 == 6 &&
-	    boot_cpu_data.x86_model >= 15)
-		return 1;
+#ifndef CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND
+static
 #endif
-	return 0;
-}
-
-static int cpufreq_governor_dbs(struct cpufreq_policy *policy,
-				   unsigned int event)
-{
-	unsigned int cpu = policy->cpu;
-	struct cpu_dbs_info_s *this_dbs_info;
-	unsigned int j;
-	int rc;
-
-	this_dbs_info = &per_cpu(od_cpu_dbs_info, cpu);
-
-	switch (event) {
-	case CPUFREQ_GOV_START:
-		if ((!cpu_online(cpu)) || (!policy->cur))
-			return -EINVAL;
-
-		mutex_lock(&dbs_mutex);
-
-		dbs_enable++;
-		for_each_cpu(j, policy->cpus) {
-			struct cpu_dbs_info_s *j_dbs_info;
-			j_dbs_info = &per_cpu(od_cpu_dbs_info, j);
-			j_dbs_info->cur_policy = policy;
-
-			j_dbs_info->prev_cpu_idle = get_cpu_idle_time(j,
-						&j_dbs_info->prev_cpu_wall);
-			if (dbs_tuners_ins.ignore_nice)
-				j_dbs_info->prev_cpu_nice =
-						kcpustat_cpu(j).cpustat[CPUTIME_NICE];
-		}
-		this_dbs_info->cpu = cpu;
-		this_dbs_info->rate_mult = 1;
-		ondemand_powersave_bias_init_cpu(cpu);
-		/*
-		 * Start the timerschedule work, when this governor
-		 * is used for first time
-		 */
-		if (dbs_enable == 1) {
-			unsigned int latency;
-
-			rc = sysfs_create_group(cpufreq_global_kobject,
-						&dbs_attr_group);
-			if (rc) {
-				mutex_unlock(&dbs_mutex);
-				return rc;
-			}
-
-			/* policy latency is in nS. Convert it to uS first */
-			latency = policy->cpuinfo.transition_latency / 1000;
-			if (latency == 0)
-				latency = 1;
-			/* Bring kernel and HW constraints together */
-			min_sampling_rate = max(min_sampling_rate,
-					MIN_LATENCY_MULTIPLIER * latency);
-			dbs_tuners_ins.sampling_rate =
-				max(min_sampling_rate,
-				    latency * LATENCY_MULTIPLIER);
-			dbs_tuners_ins.io_is_busy = should_io_be_busy();
-		}
-		mutex_unlock(&dbs_mutex);
-
-		mutex_init(&this_dbs_info->timer_mutex);
-		dbs_timer_init(this_dbs_info);
-		break;
-
-	case CPUFREQ_GOV_STOP:
-		dbs_timer_exit(this_dbs_info);
-
-		mutex_lock(&dbs_mutex);
-		mutex_destroy(&this_dbs_info->timer_mutex);
-		dbs_enable--;
-		mutex_unlock(&dbs_mutex);
-		if (!dbs_enable)
-			sysfs_remove_group(cpufreq_global_kobject,
-					   &dbs_attr_group);
-
-		break;
-
-	case CPUFREQ_GOV_LIMITS:
-		mutex_lock(&this_dbs_info->timer_mutex);
-		if (policy->max < this_dbs_info->cur_policy->cur)
-			__cpufreq_driver_target(this_dbs_info->cur_policy,
-				policy->max, CPUFREQ_RELATION_H);
-		else if (policy->min > this_dbs_info->cur_policy->cur)
-			__cpufreq_driver_target(this_dbs_info->cur_policy,
-				policy->min, CPUFREQ_RELATION_L);
-		dbs_check_cpu(this_dbs_info);
-		mutex_unlock(&this_dbs_info->timer_mutex);
-		break;
-	}
-	return 0;
-}
+struct cpufreq_governor cpufreq_gov_ondemand = {
+	.name			= "ondemand",
+	.governor		= od_cpufreq_governor_dbs,
+	.max_transition_latency	= TRANSITION_LATENCY_LIMIT,
+	.owner			= THIS_MODULE,
+};
 
 static int __init cpufreq_gov_dbs_init(void)
 {
 	u64 idle_time;
 	int cpu = get_cpu();
 
+	mutex_init(&od_dbs_data.mutex);
 	idle_time = get_cpu_idle_time_us(cpu, NULL);
 	put_cpu();
 	if (idle_time != -1ULL) {
 		/* Idle micro accounting is supported. Use finer thresholds */
-		dbs_tuners_ins.up_threshold = MICRO_FREQUENCY_UP_THRESHOLD;
-		dbs_tuners_ins.down_differential =
-					MICRO_FREQUENCY_DOWN_DIFFERENTIAL;
+		od_tuners.up_threshold = MICRO_FREQUENCY_UP_THRESHOLD;
+		od_tuners.down_differential = MICRO_FREQUENCY_DOWN_DIFFERENTIAL;
 		/*
 		 * In nohz/micro accounting case we set the minimum frequency
 		 * not depending on HZ, but fixed (very low). The deferred
 		 * timer might skip some samples if idle/sleeping as needed.
 		*/
-		min_sampling_rate = MICRO_FREQUENCY_MIN_SAMPLE_RATE;
+		od_dbs_data.min_sampling_rate = MICRO_FREQUENCY_MIN_SAMPLE_RATE;
 	} else {
 		/* For correct statistics, we need 10 ticks for each measure */
-		min_sampling_rate =
-			MIN_SAMPLING_RATE_RATIO * jiffies_to_usecs(10);
+		od_dbs_data.min_sampling_rate = MIN_SAMPLING_RATE_RATIO *
+			jiffies_to_usecs(10);
 	}
 
 	return cpufreq_register_governor(&cpufreq_gov_ondemand);
@@ -800,7 +528,6 @@
 	cpufreq_unregister_governor(&cpufreq_gov_ondemand);
 }
 
-
 MODULE_AUTHOR("Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>");
 MODULE_AUTHOR("Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>");
 MODULE_DESCRIPTION("'cpufreq_ondemand' - A dynamic cpufreq governor for "
diff --git a/drivers/cpufreq/cpufreq_performance.c b/drivers/cpufreq/cpufreq_performance.c
index f13a8a9..ceee068 100644
--- a/drivers/cpufreq/cpufreq_performance.c
+++ b/drivers/cpufreq/cpufreq_performance.c
@@ -10,6 +10,8 @@
  *
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/cpufreq.h>
diff --git a/drivers/cpufreq/cpufreq_powersave.c b/drivers/cpufreq/cpufreq_powersave.c
index 4c2eb51..2d948a1 100644
--- a/drivers/cpufreq/cpufreq_powersave.c
+++ b/drivers/cpufreq/cpufreq_powersave.c
@@ -10,6 +10,8 @@
  *
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/cpufreq.h>
diff --git a/drivers/cpufreq/cpufreq_stats.c b/drivers/cpufreq/cpufreq_stats.c
index 3998316..e40e508 100644
--- a/drivers/cpufreq/cpufreq_stats.c
+++ b/drivers/cpufreq/cpufreq_stats.c
@@ -37,7 +37,7 @@
 	unsigned int max_state;
 	unsigned int state_num;
 	unsigned int last_index;
-	cputime64_t *time_in_state;
+	u64 *time_in_state;
 	unsigned int *freq_table;
 #ifdef CONFIG_CPU_FREQ_STAT_DETAILS
 	unsigned int *trans_table;
@@ -223,7 +223,7 @@
 		count++;
 	}
 
-	alloc_size = count * sizeof(int) + count * sizeof(cputime64_t);
+	alloc_size = count * sizeof(int) + count * sizeof(u64);
 
 #ifdef CONFIG_CPU_FREQ_STAT_DETAILS
 	alloc_size += count * count * sizeof(int);
diff --git a/drivers/cpufreq/cpufreq_userspace.c b/drivers/cpufreq/cpufreq_userspace.c
index bedac1a..c8c3d29 100644
--- a/drivers/cpufreq/cpufreq_userspace.c
+++ b/drivers/cpufreq/cpufreq_userspace.c
@@ -11,6 +11,8 @@
  *
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/smp.h>
diff --git a/drivers/cpufreq/db8500-cpufreq.c b/drivers/cpufreq/db8500-cpufreq.c
index 74b830b..4f154bc 100644
--- a/drivers/cpufreq/db8500-cpufreq.c
+++ b/drivers/cpufreq/db8500-cpufreq.c
@@ -8,43 +8,17 @@
  * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
  *
  */
+#include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/cpufreq.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
-#include <linux/mfd/dbx500-prcmu.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
 #include <mach/id.h>
 
-static struct cpufreq_frequency_table freq_table[] = {
-	[0] = {
-		.index = 0,
-		.frequency = 200000,
-	},
-	[1] = {
-		.index = 1,
-		.frequency = 400000,
-	},
-	[2] = {
-		.index = 2,
-		.frequency = 800000,
-	},
-	[3] = {
-		/* Used for MAX_OPP, if available */
-		.index = 3,
-		.frequency = CPUFREQ_TABLE_END,
-	},
-	[4] = {
-		.index = 4,
-		.frequency = CPUFREQ_TABLE_END,
-	},
-};
-
-static enum arm_opp idx2opp[] = {
-	ARM_EXTCLK,
-	ARM_50_OPP,
-	ARM_100_OPP,
-	ARM_MAX_OPP
-};
+static struct cpufreq_frequency_table *freq_table;
+static struct clk *armss_clk;
 
 static struct freq_attr *db8500_cpufreq_attr[] = {
 	&cpufreq_freq_attr_scaling_available_freqs,
@@ -85,9 +59,9 @@
 	for_each_cpu(freqs.cpu, policy->cpus)
 		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 
-	/* request the PRCM unit for opp change */
-	if (prcmu_set_arm_opp(idx2opp[idx])) {
-		pr_err("db8500-cpufreq:  Failed to set OPP level\n");
+	/* update armss clk frequency */
+	if (clk_set_rate(armss_clk, freq_table[idx].frequency * 1000)) {
+		pr_err("db8500-cpufreq: Failed to update armss clk\n");
 		return -EINVAL;
 	}
 
@@ -100,25 +74,36 @@
 
 static unsigned int db8500_cpufreq_getspeed(unsigned int cpu)
 {
-	int i;
-	/* request the prcm to get the current ARM opp */
-	for (i = 0; prcmu_get_arm_opp() != idx2opp[i]; i++)
-		;
-	return freq_table[i].frequency;
+	int i = 0;
+	unsigned long freq = clk_get_rate(armss_clk) / 1000;
+
+	while (freq_table[i].frequency != CPUFREQ_TABLE_END) {
+		if (freq <= freq_table[i].frequency)
+			return freq_table[i].frequency;
+		i++;
+	}
+
+	/* We could not find a corresponding frequency. */
+	pr_err("db8500-cpufreq: Failed to find cpufreq speed\n");
+	return 0;
 }
 
 static int __cpuinit db8500_cpufreq_init(struct cpufreq_policy *policy)
 {
-	int i, res;
+	int i = 0;
+	int res;
 
-	BUILD_BUG_ON(ARRAY_SIZE(idx2opp) + 1 != ARRAY_SIZE(freq_table));
-
-	if (prcmu_has_arm_maxopp())
-		freq_table[3].frequency = 1000000;
+	armss_clk = clk_get(NULL, "armss");
+	if (IS_ERR(armss_clk)) {
+		pr_err("db8500-cpufreq : Failed to get armss clk\n");
+		return PTR_ERR(armss_clk);
+	}
 
 	pr_info("db8500-cpufreq : Available frequencies:\n");
-	for (i = 0; freq_table[i].frequency != CPUFREQ_TABLE_END; i++)
+	while (freq_table[i].frequency != CPUFREQ_TABLE_END) {
 		pr_info("  %d Mhz\n", freq_table[i].frequency/1000);
+		i++;
+	}
 
 	/* get policy fields based on the table */
 	res = cpufreq_frequency_table_cpuinfo(policy, freq_table);
@@ -126,6 +111,7 @@
 		cpufreq_frequency_table_get_attr(freq_table, policy->cpu);
 	else {
 		pr_err("db8500-cpufreq : Failed to read policy table\n");
+		clk_put(armss_clk);
 		return res;
 	}
 
@@ -159,12 +145,35 @@
 	.attr   = db8500_cpufreq_attr,
 };
 
+static int db8500_cpufreq_probe(struct platform_device *pdev)
+{
+	freq_table = dev_get_platdata(&pdev->dev);
+
+	if (!freq_table) {
+		pr_err("db8500-cpufreq: Failed to fetch cpufreq table\n");
+		return -ENODEV;
+	}
+
+	return cpufreq_register_driver(&db8500_cpufreq_driver);
+}
+
+static struct platform_driver db8500_cpufreq_plat_driver = {
+	.driver = {
+		.name = "cpufreq-u8500",
+		.owner = THIS_MODULE,
+	},
+	.probe = db8500_cpufreq_probe,
+};
+
 static int __init db8500_cpufreq_register(void)
 {
 	if (!cpu_is_u8500_family())
 		return -ENODEV;
 
 	pr_info("cpufreq for DB8500 started\n");
-	return cpufreq_register_driver(&db8500_cpufreq_driver);
+	return platform_driver_register(&db8500_cpufreq_plat_driver);
 }
 device_initcall(db8500_cpufreq_register);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("cpufreq driver for DB8500");
diff --git a/drivers/cpufreq/exynos-cpufreq.c b/drivers/cpufreq/exynos-cpufreq.c
index af2d81e..7012ea8 100644
--- a/drivers/cpufreq/exynos-cpufreq.c
+++ b/drivers/cpufreq/exynos-cpufreq.c
@@ -31,13 +31,13 @@
 static bool frequency_locked;
 static DEFINE_MUTEX(cpufreq_lock);
 
-int exynos_verify_speed(struct cpufreq_policy *policy)
+static int exynos_verify_speed(struct cpufreq_policy *policy)
 {
 	return cpufreq_frequency_table_verify(policy,
 					      exynos_info->freq_table);
 }
 
-unsigned int exynos_getspeed(unsigned int cpu)
+static unsigned int exynos_getspeed(unsigned int cpu)
 {
 	return clk_get_rate(exynos_info->cpu_clk) / 1000;
 }
@@ -100,7 +100,8 @@
 	}
 	arm_volt = volt_table[index];
 
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+	for_each_cpu(freqs.cpu, policy->cpus)
+		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 
 	/* When the new frequency is higher than current frequency */
 	if ((freqs.new > freqs.old) && !safe_arm_volt) {
@@ -115,7 +116,8 @@
 	if (freqs.new != freqs.old)
 		exynos_info->set_freq(old_index, index);
 
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+	for_each_cpu(freqs.cpu, policy->cpus)
+		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 
 	/* When the new frequency is lower than current frequency */
 	if ((freqs.new < freqs.old) ||
@@ -235,6 +237,7 @@
 		cpumask_copy(policy->related_cpus, cpu_possible_mask);
 		cpumask_copy(policy->cpus, cpu_online_mask);
 	} else {
+		policy->shared_type = CPUFREQ_SHARED_TYPE_ANY;
 		cpumask_setall(policy->cpus);
 	}
 
diff --git a/drivers/cpufreq/freq_table.c b/drivers/cpufreq/freq_table.c
index 90431cb..49cda25 100644
--- a/drivers/cpufreq/freq_table.c
+++ b/drivers/cpufreq/freq_table.c
@@ -9,6 +9,8 @@
  *
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
diff --git a/drivers/cpufreq/longhaul.c b/drivers/cpufreq/longhaul.c
index 53ddbc7..f1fa500 100644
--- a/drivers/cpufreq/longhaul.c
+++ b/drivers/cpufreq/longhaul.c
@@ -930,7 +930,7 @@
 	return 0;
 }
 
-static int __devexit longhaul_cpu_exit(struct cpufreq_policy *policy)
+static int longhaul_cpu_exit(struct cpufreq_policy *policy)
 {
 	cpufreq_frequency_table_put_attr(policy->cpu);
 	return 0;
@@ -946,7 +946,7 @@
 	.target	= longhaul_target,
 	.get	= longhaul_get,
 	.init	= longhaul_cpu_init,
-	.exit	= __devexit_p(longhaul_cpu_exit),
+	.exit	= longhaul_cpu_exit,
 	.name	= "longhaul",
 	.owner	= THIS_MODULE,
 	.attr	= longhaul_attr,
diff --git a/drivers/cpufreq/powernow-k8.c b/drivers/cpufreq/powernow-k8.c
index e3ebb4f..056faf6 100644
--- a/drivers/cpufreq/powernow-k8.c
+++ b/drivers/cpufreq/powernow-k8.c
@@ -1186,7 +1186,7 @@
 	return -ENODEV;
 }
 
-static int __devexit powernowk8_cpu_exit(struct cpufreq_policy *pol)
+static int powernowk8_cpu_exit(struct cpufreq_policy *pol)
 {
 	struct powernow_k8_data *data = per_cpu(powernow_data, pol->cpu);
 
@@ -1242,7 +1242,7 @@
 	.target		= powernowk8_target,
 	.bios_limit	= acpi_processor_get_bios_limit,
 	.init		= powernowk8_cpu_init,
-	.exit		= __devexit_p(powernowk8_cpu_exit),
+	.exit		= powernowk8_cpu_exit,
 	.get		= powernowk8_get,
 	.name		= "powernow-k8",
 	.owner		= THIS_MODULE,
diff --git a/drivers/cpufreq/spear-cpufreq.c b/drivers/cpufreq/spear-cpufreq.c
new file mode 100644
index 0000000..4575cfe
--- /dev/null
+++ b/drivers/cpufreq/spear-cpufreq.c
@@ -0,0 +1,291 @@
+/*
+ * drivers/cpufreq/spear-cpufreq.c
+ *
+ * CPU Frequency Scaling for SPEAr platform
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Deepak Sikri <deepak.sikri@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/clk.h>
+#include <linux/cpufreq.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+/* SPEAr CPUFreq driver data structure */
+static struct {
+	struct clk *clk;
+	unsigned int transition_latency;
+	struct cpufreq_frequency_table *freq_tbl;
+	u32 cnt;
+} spear_cpufreq;
+
+int spear_cpufreq_verify(struct cpufreq_policy *policy)
+{
+	return cpufreq_frequency_table_verify(policy, spear_cpufreq.freq_tbl);
+}
+
+static unsigned int spear_cpufreq_get(unsigned int cpu)
+{
+	return clk_get_rate(spear_cpufreq.clk) / 1000;
+}
+
+static struct clk *spear1340_cpu_get_possible_parent(unsigned long newfreq)
+{
+	struct clk *sys_pclk;
+	int pclk;
+	/*
+	 * In SPEAr1340, cpu clk's parent sys clk can take input from
+	 * following sources
+	 */
+	const char *sys_clk_src[] = {
+		"sys_syn_clk",
+		"pll1_clk",
+		"pll2_clk",
+		"pll3_clk",
+	};
+
+	/*
+	 * As sys clk can have multiple source with their own range
+	 * limitation so we choose possible sources accordingly
+	 */
+	if (newfreq <= 300000000)
+		pclk = 0; /* src is sys_syn_clk */
+	else if (newfreq > 300000000 && newfreq <= 500000000)
+		pclk = 3; /* src is pll3_clk */
+	else if (newfreq == 600000000)
+		pclk = 1; /* src is pll1_clk */
+	else
+		return ERR_PTR(-EINVAL);
+
+	/* Get parent to sys clock */
+	sys_pclk = clk_get(NULL, sys_clk_src[pclk]);
+	if (IS_ERR(sys_pclk))
+		pr_err("Failed to get %s clock\n", sys_clk_src[pclk]);
+
+	return sys_pclk;
+}
+
+/*
+ * In SPEAr1340, we cannot use newfreq directly because we need to actually
+ * access a source clock (clk) which might not be ancestor of cpu at present.
+ * Hence in SPEAr1340 we would operate on source clock directly before switching
+ * cpu clock to it.
+ */
+static int spear1340_set_cpu_rate(struct clk *sys_pclk, unsigned long newfreq)
+{
+	struct clk *sys_clk;
+	int ret = 0;
+
+	sys_clk = clk_get_parent(spear_cpufreq.clk);
+	if (IS_ERR(sys_clk)) {
+		pr_err("failed to get cpu's parent (sys) clock\n");
+		return PTR_ERR(sys_clk);
+	}
+
+	/* Set the rate of the source clock before changing the parent */
+	ret = clk_set_rate(sys_pclk, newfreq);
+	if (ret) {
+		pr_err("Failed to set sys clk rate to %lu\n", newfreq);
+		return ret;
+	}
+
+	ret = clk_set_parent(sys_clk, sys_pclk);
+	if (ret) {
+		pr_err("Failed to set sys clk parent\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int spear_cpufreq_target(struct cpufreq_policy *policy,
+		unsigned int target_freq, unsigned int relation)
+{
+	struct cpufreq_freqs freqs;
+	unsigned long newfreq;
+	struct clk *srcclk;
+	int index, ret, mult = 1;
+
+	if (cpufreq_frequency_table_target(policy, spear_cpufreq.freq_tbl,
+				target_freq, relation, &index))
+		return -EINVAL;
+
+	freqs.cpu = policy->cpu;
+	freqs.old = spear_cpufreq_get(0);
+
+	newfreq = spear_cpufreq.freq_tbl[index].frequency * 1000;
+	if (of_machine_is_compatible("st,spear1340")) {
+		/*
+		 * SPEAr1340 is special in the sense that due to the possibility
+		 * of multiple clock sources for cpu clk's parent we can have
+		 * different clock source for different frequency of cpu clk.
+		 * Hence we need to choose one from amongst these possible clock
+		 * sources.
+		 */
+		srcclk = spear1340_cpu_get_possible_parent(newfreq);
+		if (IS_ERR(srcclk)) {
+			pr_err("Failed to get src clk\n");
+			return PTR_ERR(srcclk);
+		}
+
+		/* SPEAr1340: src clk is always 2 * intended cpu clk */
+		mult = 2;
+	} else {
+		/*
+		 * src clock to be altered is ancestor of cpu clock. Hence we
+		 * can directly work on cpu clk
+		 */
+		srcclk = spear_cpufreq.clk;
+	}
+
+	newfreq = clk_round_rate(srcclk, newfreq * mult);
+	if (newfreq < 0) {
+		pr_err("clk_round_rate failed for cpu src clock\n");
+		return newfreq;
+	}
+
+	freqs.new = newfreq / 1000;
+	freqs.new /= mult;
+	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+	if (mult == 2)
+		ret = spear1340_set_cpu_rate(srcclk, newfreq);
+	else
+		ret = clk_set_rate(spear_cpufreq.clk, newfreq);
+
+	/* Get current rate after clk_set_rate, in case of failure */
+	if (ret) {
+		pr_err("CPU Freq: cpu clk_set_rate failed: %d\n", ret);
+		freqs.new = clk_get_rate(spear_cpufreq.clk) / 1000;
+	}
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+	return ret;
+}
+
+static int spear_cpufreq_init(struct cpufreq_policy *policy)
+{
+	int ret;
+
+	ret = cpufreq_frequency_table_cpuinfo(policy, spear_cpufreq.freq_tbl);
+	if (ret) {
+		pr_err("cpufreq_frequency_table_cpuinfo() failed");
+		return ret;
+	}
+
+	cpufreq_frequency_table_get_attr(spear_cpufreq.freq_tbl, policy->cpu);
+	policy->cpuinfo.transition_latency = spear_cpufreq.transition_latency;
+	policy->cur = spear_cpufreq_get(0);
+
+	cpumask_copy(policy->cpus, topology_core_cpumask(policy->cpu));
+	cpumask_copy(policy->related_cpus, policy->cpus);
+
+	return 0;
+}
+
+static int spear_cpufreq_exit(struct cpufreq_policy *policy)
+{
+	cpufreq_frequency_table_put_attr(policy->cpu);
+	return 0;
+}
+
+static struct freq_attr *spear_cpufreq_attr[] = {
+	 &cpufreq_freq_attr_scaling_available_freqs,
+	 NULL,
+};
+
+static struct cpufreq_driver spear_cpufreq_driver = {
+	.name		= "cpufreq-spear",
+	.flags		= CPUFREQ_STICKY,
+	.verify		= spear_cpufreq_verify,
+	.target		= spear_cpufreq_target,
+	.get		= spear_cpufreq_get,
+	.init		= spear_cpufreq_init,
+	.exit		= spear_cpufreq_exit,
+	.attr		= spear_cpufreq_attr,
+};
+
+static int spear_cpufreq_driver_init(void)
+{
+	struct device_node *np;
+	const struct property *prop;
+	struct cpufreq_frequency_table *freq_tbl;
+	const __be32 *val;
+	int cnt, i, ret;
+
+	np = of_find_node_by_path("/cpus/cpu@0");
+	if (!np) {
+		pr_err("No cpu node found");
+		return -ENODEV;
+	}
+
+	if (of_property_read_u32(np, "clock-latency",
+				&spear_cpufreq.transition_latency))
+		spear_cpufreq.transition_latency = CPUFREQ_ETERNAL;
+
+	prop = of_find_property(np, "cpufreq_tbl", NULL);
+	if (!prop || !prop->value) {
+		pr_err("Invalid cpufreq_tbl");
+		ret = -ENODEV;
+		goto out_put_node;
+	}
+
+	cnt = prop->length / sizeof(u32);
+	val = prop->value;
+
+	freq_tbl = kmalloc(sizeof(*freq_tbl) * (cnt + 1), GFP_KERNEL);
+	if (!freq_tbl) {
+		ret = -ENOMEM;
+		goto out_put_node;
+	}
+
+	for (i = 0; i < cnt; i++) {
+		freq_tbl[i].index = i;
+		freq_tbl[i].frequency = be32_to_cpup(val++);
+	}
+
+	freq_tbl[i].index = i;
+	freq_tbl[i].frequency = CPUFREQ_TABLE_END;
+
+	spear_cpufreq.freq_tbl = freq_tbl;
+
+	of_node_put(np);
+
+	spear_cpufreq.clk = clk_get(NULL, "cpu_clk");
+	if (IS_ERR(spear_cpufreq.clk)) {
+		pr_err("Unable to get CPU clock\n");
+		ret = PTR_ERR(spear_cpufreq.clk);
+		goto out_put_mem;
+	}
+
+	ret = cpufreq_register_driver(&spear_cpufreq_driver);
+	if (!ret)
+		return 0;
+
+	pr_err("failed register driver: %d\n", ret);
+	clk_put(spear_cpufreq.clk);
+
+out_put_mem:
+	kfree(freq_tbl);
+	return ret;
+
+out_put_node:
+	of_node_put(np);
+	return ret;
+}
+late_initcall(spear_cpufreq_driver_init);
+
+MODULE_AUTHOR("Deepak Sikri <deepak.sikri@st.com>");
+MODULE_DESCRIPTION("SPEAr CPUFreq driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/cpuidle/Kconfig b/drivers/cpuidle/Kconfig
index a76b689..234ae65 100644
--- a/drivers/cpuidle/Kconfig
+++ b/drivers/cpuidle/Kconfig
@@ -9,6 +9,15 @@
 
 	  If you're using an ACPI-enabled platform, you should say Y here.
 
+config CPU_IDLE_MULTIPLE_DRIVERS
+        bool "Support multiple cpuidle drivers"
+        depends on CPU_IDLE
+        default n
+        help
+         Allows the cpuidle framework to use different drivers for each CPU.
+         This is useful if you have a system with different CPU latencies and
+         states. If unsure say N.
+
 config CPU_IDLE_GOV_LADDER
 	bool
 	depends on CPU_IDLE
diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c
index 7f15b85..8df53dd 100644
--- a/drivers/cpuidle/cpuidle.c
+++ b/drivers/cpuidle/cpuidle.c
@@ -68,7 +68,7 @@
 int cpuidle_play_dead(void)
 {
 	struct cpuidle_device *dev = __this_cpu_read(cpuidle_devices);
-	struct cpuidle_driver *drv = cpuidle_get_driver();
+	struct cpuidle_driver *drv = cpuidle_get_cpu_driver(dev);
 	int i, dead_state = -1;
 	int power_usage = -1;
 
@@ -109,8 +109,7 @@
 		/* This can be moved to within driver enter routine
 		 * but that results in multiple copies of same code.
 		 */
-		dev->states_usage[entered_state].time +=
-				(unsigned long long)dev->last_residency;
+		dev->states_usage[entered_state].time += dev->last_residency;
 		dev->states_usage[entered_state].usage++;
 	} else {
 		dev->last_residency = 0;
@@ -128,7 +127,7 @@
 int cpuidle_idle_call(void)
 {
 	struct cpuidle_device *dev = __this_cpu_read(cpuidle_devices);
-	struct cpuidle_driver *drv = cpuidle_get_driver();
+	struct cpuidle_driver *drv;
 	int next_state, entered_state;
 
 	if (off)
@@ -141,9 +140,15 @@
 	if (!dev || !dev->enabled)
 		return -EBUSY;
 
+	drv = cpuidle_get_cpu_driver(dev);
+
 	/* ask the governor for the next state */
 	next_state = cpuidle_curr_governor->select(drv, dev);
 	if (need_resched()) {
+		dev->last_residency = 0;
+		/* give the governor an opportunity to reflect on the outcome */
+		if (cpuidle_curr_governor->reflect)
+			cpuidle_curr_governor->reflect(dev, next_state);
 		local_irq_enable();
 		return 0;
 	}
@@ -308,15 +313,19 @@
 int cpuidle_enable_device(struct cpuidle_device *dev)
 {
 	int ret, i;
-	struct cpuidle_driver *drv = cpuidle_get_driver();
+	struct cpuidle_driver *drv;
 
 	if (!dev)
 		return -EINVAL;
 
 	if (dev->enabled)
 		return 0;
+
+	drv = cpuidle_get_cpu_driver(dev);
+
 	if (!drv || !cpuidle_curr_governor)
 		return -EIO;
+
 	if (!dev->state_count)
 		dev->state_count = drv->state_count;
 
@@ -331,7 +340,8 @@
 
 	poll_idle_init(drv);
 
-	if ((ret = cpuidle_add_state_sysfs(dev)))
+	ret = cpuidle_add_device_sysfs(dev);
+	if (ret)
 		return ret;
 
 	if (cpuidle_curr_governor->enable &&
@@ -352,7 +362,7 @@
 	return 0;
 
 fail_sysfs:
-	cpuidle_remove_state_sysfs(dev);
+	cpuidle_remove_device_sysfs(dev);
 
 	return ret;
 }
@@ -368,17 +378,20 @@
  */
 void cpuidle_disable_device(struct cpuidle_device *dev)
 {
+	struct cpuidle_driver *drv = cpuidle_get_cpu_driver(dev);
+
 	if (!dev || !dev->enabled)
 		return;
-	if (!cpuidle_get_driver() || !cpuidle_curr_governor)
+
+	if (!drv || !cpuidle_curr_governor)
 		return;
 
 	dev->enabled = 0;
 
 	if (cpuidle_curr_governor->disable)
-		cpuidle_curr_governor->disable(cpuidle_get_driver(), dev);
+		cpuidle_curr_governor->disable(drv, dev);
 
-	cpuidle_remove_state_sysfs(dev);
+	cpuidle_remove_device_sysfs(dev);
 	enabled_devices--;
 }
 
@@ -394,17 +407,14 @@
 static int __cpuidle_register_device(struct cpuidle_device *dev)
 {
 	int ret;
-	struct device *cpu_dev = get_cpu_device((unsigned long)dev->cpu);
-	struct cpuidle_driver *cpuidle_driver = cpuidle_get_driver();
+	struct cpuidle_driver *drv = cpuidle_get_cpu_driver(dev);
 
-	if (!try_module_get(cpuidle_driver->owner))
+	if (!try_module_get(drv->owner))
 		return -EINVAL;
 
-	init_completion(&dev->kobj_unregister);
-
 	per_cpu(cpuidle_devices, dev->cpu) = dev;
 	list_add(&dev->device_list, &cpuidle_detected_devices);
-	ret = cpuidle_add_sysfs(cpu_dev);
+	ret = cpuidle_add_sysfs(dev);
 	if (ret)
 		goto err_sysfs;
 
@@ -416,12 +426,11 @@
 	return 0;
 
 err_coupled:
-	cpuidle_remove_sysfs(cpu_dev);
-	wait_for_completion(&dev->kobj_unregister);
+	cpuidle_remove_sysfs(dev);
 err_sysfs:
 	list_del(&dev->device_list);
 	per_cpu(cpuidle_devices, dev->cpu) = NULL;
-	module_put(cpuidle_driver->owner);
+	module_put(drv->owner);
 	return ret;
 }
 
@@ -460,8 +469,7 @@
  */
 void cpuidle_unregister_device(struct cpuidle_device *dev)
 {
-	struct device *cpu_dev = get_cpu_device((unsigned long)dev->cpu);
-	struct cpuidle_driver *cpuidle_driver = cpuidle_get_driver();
+	struct cpuidle_driver *drv = cpuidle_get_cpu_driver(dev);
 
 	if (dev->registered == 0)
 		return;
@@ -470,16 +478,15 @@
 
 	cpuidle_disable_device(dev);
 
-	cpuidle_remove_sysfs(cpu_dev);
+	cpuidle_remove_sysfs(dev);
 	list_del(&dev->device_list);
-	wait_for_completion(&dev->kobj_unregister);
 	per_cpu(cpuidle_devices, dev->cpu) = NULL;
 
 	cpuidle_coupled_unregister_device(dev);
 
 	cpuidle_resume_and_unlock();
 
-	module_put(cpuidle_driver->owner);
+	module_put(drv->owner);
 }
 
 EXPORT_SYMBOL_GPL(cpuidle_unregister_device);
diff --git a/drivers/cpuidle/cpuidle.h b/drivers/cpuidle/cpuidle.h
index 76e7f69..ee97e96 100644
--- a/drivers/cpuidle/cpuidle.h
+++ b/drivers/cpuidle/cpuidle.h
@@ -5,8 +5,6 @@
 #ifndef __DRIVER_CPUIDLE_H
 #define __DRIVER_CPUIDLE_H
 
-#include <linux/device.h>
-
 /* For internal use only */
 extern struct cpuidle_governor *cpuidle_curr_governor;
 extern struct list_head cpuidle_governors;
@@ -25,12 +23,15 @@
 extern int cpuidle_switch_governor(struct cpuidle_governor *gov);
 
 /* sysfs */
+
+struct device;
+
 extern int cpuidle_add_interface(struct device *dev);
 extern void cpuidle_remove_interface(struct device *dev);
-extern int cpuidle_add_state_sysfs(struct cpuidle_device *device);
-extern void cpuidle_remove_state_sysfs(struct cpuidle_device *device);
-extern int cpuidle_add_sysfs(struct device *dev);
-extern void cpuidle_remove_sysfs(struct device *dev);
+extern int cpuidle_add_device_sysfs(struct cpuidle_device *device);
+extern void cpuidle_remove_device_sysfs(struct cpuidle_device *device);
+extern int cpuidle_add_sysfs(struct cpuidle_device *dev);
+extern void cpuidle_remove_sysfs(struct cpuidle_device *dev);
 
 #ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED
 bool cpuidle_state_is_coupled(struct cpuidle_device *dev,
diff --git a/drivers/cpuidle/driver.c b/drivers/cpuidle/driver.c
index 87db387..3af841f 100644
--- a/drivers/cpuidle/driver.c
+++ b/drivers/cpuidle/driver.c
@@ -14,9 +14,10 @@
 
 #include "cpuidle.h"
 
-static struct cpuidle_driver *cpuidle_curr_driver;
 DEFINE_SPINLOCK(cpuidle_driver_lock);
-int cpuidle_driver_refcount;
+
+static void __cpuidle_set_cpu_driver(struct cpuidle_driver *drv, int cpu);
+static struct cpuidle_driver * __cpuidle_get_cpu_driver(int cpu);
 
 static void set_power_states(struct cpuidle_driver *drv)
 {
@@ -40,11 +41,15 @@
 		drv->states[i].power_usage = -1 - i;
 }
 
-/**
- * cpuidle_register_driver - registers a driver
- * @drv: the driver
- */
-int cpuidle_register_driver(struct cpuidle_driver *drv)
+static void __cpuidle_driver_init(struct cpuidle_driver *drv)
+{
+	drv->refcnt = 0;
+
+	if (!drv->power_specified)
+		set_power_states(drv);
+}
+
+static int __cpuidle_register_driver(struct cpuidle_driver *drv, int cpu)
 {
 	if (!drv || !drv->state_count)
 		return -EINVAL;
@@ -52,31 +57,101 @@
 	if (cpuidle_disabled())
 		return -ENODEV;
 
-	spin_lock(&cpuidle_driver_lock);
-	if (cpuidle_curr_driver) {
-		spin_unlock(&cpuidle_driver_lock);
+	if (__cpuidle_get_cpu_driver(cpu))
 		return -EBUSY;
-	}
 
-	if (!drv->power_specified)
-		set_power_states(drv);
+	__cpuidle_driver_init(drv);
 
-	cpuidle_curr_driver = drv;
-
-	spin_unlock(&cpuidle_driver_lock);
+	__cpuidle_set_cpu_driver(drv, cpu);
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(cpuidle_register_driver);
+
+static void __cpuidle_unregister_driver(struct cpuidle_driver *drv, int cpu)
+{
+	if (drv != __cpuidle_get_cpu_driver(cpu))
+		return;
+
+	if (!WARN_ON(drv->refcnt > 0))
+		__cpuidle_set_cpu_driver(NULL, cpu);
+}
+
+#ifdef CONFIG_CPU_IDLE_MULTIPLE_DRIVERS
+
+static DEFINE_PER_CPU(struct cpuidle_driver *, cpuidle_drivers);
+
+static void __cpuidle_set_cpu_driver(struct cpuidle_driver *drv, int cpu)
+{
+	per_cpu(cpuidle_drivers, cpu) = drv;
+}
+
+static struct cpuidle_driver *__cpuidle_get_cpu_driver(int cpu)
+{
+	return per_cpu(cpuidle_drivers, cpu);
+}
+
+static void __cpuidle_unregister_all_cpu_driver(struct cpuidle_driver *drv)
+{
+	int cpu;
+	for_each_present_cpu(cpu)
+		__cpuidle_unregister_driver(drv, cpu);
+}
+
+static int __cpuidle_register_all_cpu_driver(struct cpuidle_driver *drv)
+{
+	int ret = 0;
+	int i, cpu;
+
+	for_each_present_cpu(cpu) {
+		ret = __cpuidle_register_driver(drv, cpu);
+		if (ret)
+			break;
+	}
+
+	if (ret)
+		for_each_present_cpu(i) {
+			if (i == cpu)
+				break;
+			__cpuidle_unregister_driver(drv, i);
+		}
+
+
+	return ret;
+}
+
+int cpuidle_register_cpu_driver(struct cpuidle_driver *drv, int cpu)
+{
+	int ret;
+
+	spin_lock(&cpuidle_driver_lock);
+	ret = __cpuidle_register_driver(drv, cpu);
+	spin_unlock(&cpuidle_driver_lock);
+
+	return ret;
+}
+
+void cpuidle_unregister_cpu_driver(struct cpuidle_driver *drv, int cpu)
+{
+	spin_lock(&cpuidle_driver_lock);
+	__cpuidle_unregister_driver(drv, cpu);
+	spin_unlock(&cpuidle_driver_lock);
+}
 
 /**
- * cpuidle_get_driver - return the current driver
+ * cpuidle_register_driver - registers a driver
+ * @drv: the driver
  */
-struct cpuidle_driver *cpuidle_get_driver(void)
+int cpuidle_register_driver(struct cpuidle_driver *drv)
 {
-	return cpuidle_curr_driver;
+	int ret;
+
+	spin_lock(&cpuidle_driver_lock);
+	ret = __cpuidle_register_all_cpu_driver(drv);
+	spin_unlock(&cpuidle_driver_lock);
+
+	return ret;
 }
-EXPORT_SYMBOL_GPL(cpuidle_get_driver);
+EXPORT_SYMBOL_GPL(cpuidle_register_driver);
 
 /**
  * cpuidle_unregister_driver - unregisters a driver
@@ -84,29 +159,103 @@
  */
 void cpuidle_unregister_driver(struct cpuidle_driver *drv)
 {
-	if (drv != cpuidle_curr_driver) {
-		WARN(1, "invalid cpuidle_unregister_driver(%s)\n",
-			drv->name);
-		return;
-	}
-
 	spin_lock(&cpuidle_driver_lock);
-
-	if (!WARN_ON(cpuidle_driver_refcount > 0))
-		cpuidle_curr_driver = NULL;
-
+	__cpuidle_unregister_all_cpu_driver(drv);
 	spin_unlock(&cpuidle_driver_lock);
 }
 EXPORT_SYMBOL_GPL(cpuidle_unregister_driver);
 
+#else
+
+static struct cpuidle_driver *cpuidle_curr_driver;
+
+static inline void __cpuidle_set_cpu_driver(struct cpuidle_driver *drv, int cpu)
+{
+	cpuidle_curr_driver = drv;
+}
+
+static inline struct cpuidle_driver *__cpuidle_get_cpu_driver(int cpu)
+{
+	return cpuidle_curr_driver;
+}
+
+/**
+ * cpuidle_register_driver - registers a driver
+ * @drv: the driver
+ */
+int cpuidle_register_driver(struct cpuidle_driver *drv)
+{
+	int ret, cpu;
+
+	cpu = get_cpu();
+	spin_lock(&cpuidle_driver_lock);
+	ret = __cpuidle_register_driver(drv, cpu);
+	spin_unlock(&cpuidle_driver_lock);
+	put_cpu();
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(cpuidle_register_driver);
+
+/**
+ * cpuidle_unregister_driver - unregisters a driver
+ * @drv: the driver
+ */
+void cpuidle_unregister_driver(struct cpuidle_driver *drv)
+{
+	int cpu;
+
+	cpu = get_cpu();
+	spin_lock(&cpuidle_driver_lock);
+	__cpuidle_unregister_driver(drv, cpu);
+	spin_unlock(&cpuidle_driver_lock);
+	put_cpu();
+}
+EXPORT_SYMBOL_GPL(cpuidle_unregister_driver);
+#endif
+
+/**
+ * cpuidle_get_driver - return the current driver
+ */
+struct cpuidle_driver *cpuidle_get_driver(void)
+{
+	struct cpuidle_driver *drv;
+	int cpu;
+
+	cpu = get_cpu();
+	drv = __cpuidle_get_cpu_driver(cpu);
+	put_cpu();
+
+	return drv;
+}
+EXPORT_SYMBOL_GPL(cpuidle_get_driver);
+
+/**
+ * cpuidle_get_cpu_driver - return the driver tied with a cpu
+ */
+struct cpuidle_driver *cpuidle_get_cpu_driver(struct cpuidle_device *dev)
+{
+	struct cpuidle_driver *drv;
+
+	if (!dev)
+		return NULL;
+
+	spin_lock(&cpuidle_driver_lock);
+	drv = __cpuidle_get_cpu_driver(dev->cpu);
+	spin_unlock(&cpuidle_driver_lock);
+
+	return drv;
+}
+EXPORT_SYMBOL_GPL(cpuidle_get_cpu_driver);
+
 struct cpuidle_driver *cpuidle_driver_ref(void)
 {
 	struct cpuidle_driver *drv;
 
 	spin_lock(&cpuidle_driver_lock);
 
-	drv = cpuidle_curr_driver;
-	cpuidle_driver_refcount++;
+	drv = cpuidle_get_driver();
+	drv->refcnt++;
 
 	spin_unlock(&cpuidle_driver_lock);
 	return drv;
@@ -114,10 +263,12 @@
 
 void cpuidle_driver_unref(void)
 {
+	struct cpuidle_driver *drv = cpuidle_get_driver();
+
 	spin_lock(&cpuidle_driver_lock);
 
-	if (!WARN_ON(cpuidle_driver_refcount <= 0))
-		cpuidle_driver_refcount--;
+	if (drv && !WARN_ON(drv->refcnt <= 0))
+		drv->refcnt--;
 
 	spin_unlock(&cpuidle_driver_lock);
 }
diff --git a/drivers/cpuidle/governors/menu.c b/drivers/cpuidle/governors/menu.c
index 5b1f2c3..bd40b94 100644
--- a/drivers/cpuidle/governors/menu.c
+++ b/drivers/cpuidle/governors/menu.c
@@ -28,6 +28,13 @@
 #define MAX_INTERESTING 50000
 #define STDDEV_THRESH 400
 
+/* 60 * 60 > STDDEV_THRESH * INTERVALS = 400 * 8 */
+#define MAX_DEVIATION 60
+
+static DEFINE_PER_CPU(struct hrtimer, menu_hrtimer);
+static DEFINE_PER_CPU(int, hrtimer_status);
+/* menu hrtimer mode */
+enum {MENU_HRTIMER_STOP, MENU_HRTIMER_REPEAT, MENU_HRTIMER_GENERAL};
 
 /*
  * Concepts and ideas behind the menu governor
@@ -109,6 +116,13 @@
  *
  */
 
+/*
+ * The C-state residency is so long that is is worthwhile to exit
+ * from the shallow C-state and re-enter into a deeper C-state.
+ */
+static unsigned int perfect_cstate_ms __read_mostly = 30;
+module_param(perfect_cstate_ms, uint, 0000);
+
 struct menu_device {
 	int		last_state_idx;
 	int             needs_update;
@@ -191,40 +205,102 @@
 	return div_u64(dividend + (divisor / 2), divisor);
 }
 
+/* Cancel the hrtimer if it is not triggered yet */
+void menu_hrtimer_cancel(void)
+{
+	int cpu = smp_processor_id();
+	struct hrtimer *hrtmr = &per_cpu(menu_hrtimer, cpu);
+
+	/* The timer is still not time out*/
+	if (per_cpu(hrtimer_status, cpu)) {
+		hrtimer_cancel(hrtmr);
+		per_cpu(hrtimer_status, cpu) = MENU_HRTIMER_STOP;
+	}
+}
+EXPORT_SYMBOL_GPL(menu_hrtimer_cancel);
+
+/* Call back for hrtimer is triggered */
+static enum hrtimer_restart menu_hrtimer_notify(struct hrtimer *hrtimer)
+{
+	int cpu = smp_processor_id();
+	struct menu_device *data = &per_cpu(menu_devices, cpu);
+
+	/* In general case, the expected residency is much larger than
+	 *  deepest C-state target residency, but prediction logic still
+	 *  predicts a small predicted residency, so the prediction
+	 *  history is totally broken if the timer is triggered.
+	 *  So reset the correction factor.
+	 */
+	if (per_cpu(hrtimer_status, cpu) == MENU_HRTIMER_GENERAL)
+		data->correction_factor[data->bucket] = RESOLUTION * DECAY;
+
+	per_cpu(hrtimer_status, cpu) = MENU_HRTIMER_STOP;
+
+	return HRTIMER_NORESTART;
+}
+
 /*
  * Try detecting repeating patterns by keeping track of the last 8
  * intervals, and checking if the standard deviation of that set
  * of points is below a threshold. If it is... then use the
  * average of these 8 points as the estimated value.
  */
-static void detect_repeating_patterns(struct menu_device *data)
+static u32 get_typical_interval(struct menu_device *data)
 {
-	int i;
-	uint64_t avg = 0;
-	uint64_t stddev = 0; /* contains the square of the std deviation */
+	int i = 0, divisor = 0;
+	uint64_t max = 0, avg = 0, stddev = 0;
+	int64_t thresh = LLONG_MAX; /* Discard outliers above this value. */
+	unsigned int ret = 0;
+
+again:
 
 	/* first calculate average and standard deviation of the past */
-	for (i = 0; i < INTERVALS; i++)
-		avg += data->intervals[i];
-	avg = avg / INTERVALS;
+	max = avg = divisor = stddev = 0;
+	for (i = 0; i < INTERVALS; i++) {
+		int64_t value = data->intervals[i];
+		if (value <= thresh) {
+			avg += value;
+			divisor++;
+			if (value > max)
+				max = value;
+		}
+	}
+	do_div(avg, divisor);
 
-	/* if the avg is beyond the known next tick, it's worthless */
-	if (avg > data->expected_us)
-		return;
-
-	for (i = 0; i < INTERVALS; i++)
-		stddev += (data->intervals[i] - avg) *
-			  (data->intervals[i] - avg);
-
-	stddev = stddev / INTERVALS;
-
+	for (i = 0; i < INTERVALS; i++) {
+		int64_t value = data->intervals[i];
+		if (value <= thresh) {
+			int64_t diff = value - avg;
+			stddev += diff * diff;
+		}
+	}
+	do_div(stddev, divisor);
+	stddev = int_sqrt(stddev);
 	/*
-	 * now.. if stddev is small.. then assume we have a
-	 * repeating pattern and predict we keep doing this.
+	 * If we have outliers to the upside in our distribution, discard
+	 * those by setting the threshold to exclude these outliers, then
+	 * calculate the average and standard deviation again. Once we get
+	 * down to the bottom 3/4 of our samples, stop excluding samples.
+	 *
+	 * This can deal with workloads that have long pauses interspersed
+	 * with sporadic activity with a bunch of short pauses.
+	 *
+	 * The typical interval is obtained when standard deviation is small
+	 * or standard deviation is small compared to the average interval.
 	 */
-
-	if (avg && stddev < STDDEV_THRESH)
+	if (((avg > stddev * 6) && (divisor * 4 >= INTERVALS * 3))
+							|| stddev <= 20) {
 		data->predicted_us = avg;
+		ret = 1;
+		return ret;
+
+	} else if ((divisor * 4) > INTERVALS * 3) {
+		/* Exclude the max interval */
+		thresh = max - 1;
+		goto again;
+	}
+
+	return ret;
 }
 
 /**
@@ -240,6 +316,9 @@
 	int i;
 	int multiplier;
 	struct timespec t;
+	int repeat = 0, low_predicted = 0;
+	int cpu = smp_processor_id();
+	struct hrtimer *hrtmr = &per_cpu(menu_hrtimer, cpu);
 
 	if (data->needs_update) {
 		menu_update(drv, dev);
@@ -274,7 +353,7 @@
 	data->predicted_us = div_round64(data->expected_us * data->correction_factor[data->bucket],
 					 RESOLUTION * DECAY);
 
-	detect_repeating_patterns(data);
+	repeat = get_typical_interval(data);
 
 	/*
 	 * We want to default to C1 (hlt), not to busy polling
@@ -295,8 +374,10 @@
 
 		if (s->disabled || su->disable)
 			continue;
-		if (s->target_residency > data->predicted_us)
+		if (s->target_residency > data->predicted_us) {
+			low_predicted = 1;
 			continue;
+		}
 		if (s->exit_latency > latency_req)
 			continue;
 		if (s->exit_latency * multiplier > data->predicted_us)
@@ -309,6 +390,44 @@
 		}
 	}
 
+	/* not deepest C-state chosen for low predicted residency */
+	if (low_predicted) {
+		unsigned int timer_us = 0;
+		unsigned int perfect_us = 0;
+
+		/*
+		 * Set a timer to detect whether this sleep is much
+		 * longer than repeat mode predicted.  If the timer
+		 * triggers, the code will evaluate whether to put
+		 * the CPU into a deeper C-state.
+		 * The timer is cancelled on CPU wakeup.
+		 */
+		timer_us = 2 * (data->predicted_us + MAX_DEVIATION);
+
+		perfect_us = perfect_cstate_ms * 1000;
+
+		if (repeat && (4 * timer_us < data->expected_us)) {
+			RCU_NONIDLE(hrtimer_start(hrtmr,
+				ns_to_ktime(1000 * timer_us),
+				HRTIMER_MODE_REL_PINNED));
+			/* In repeat case, menu hrtimer is started */
+			per_cpu(hrtimer_status, cpu) = MENU_HRTIMER_REPEAT;
+		} else if (perfect_us < data->expected_us) {
+			/*
+			 * The next timer is long. This could be because
+			 * we did not make a useful prediction.
+			 * In that case, it makes sense to re-enter
+			 * into a deeper C-state after some time.
+			 */
+			RCU_NONIDLE(hrtimer_start(hrtmr,
+				ns_to_ktime(1000 * timer_us),
+				HRTIMER_MODE_REL_PINNED));
+			/* In general case, menu hrtimer is started */
+			per_cpu(hrtimer_status, cpu) = MENU_HRTIMER_GENERAL;
+		}
+
+	}
+
 	return data->last_state_idx;
 }
 
@@ -399,6 +518,9 @@
 				struct cpuidle_device *dev)
 {
 	struct menu_device *data = &per_cpu(menu_devices, dev->cpu);
+	struct hrtimer *t = &per_cpu(menu_hrtimer, dev->cpu);
+	hrtimer_init(t, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+	t->function = menu_hrtimer_notify;
 
 	memset(data, 0, sizeof(struct menu_device));
 
diff --git a/drivers/cpuidle/sysfs.c b/drivers/cpuidle/sysfs.c
index 5f809e3..3409429 100644
--- a/drivers/cpuidle/sysfs.c
+++ b/drivers/cpuidle/sysfs.c
@@ -12,6 +12,7 @@
 #include <linux/slab.h>
 #include <linux/cpu.h>
 #include <linux/capability.h>
+#include <linux/device.h>
 
 #include "cpuidle.h"
 
@@ -297,6 +298,13 @@
 	NULL
 };
 
+struct cpuidle_state_kobj {
+	struct cpuidle_state *state;
+	struct cpuidle_state_usage *state_usage;
+	struct completion kobj_unregister;
+	struct kobject kobj;
+};
+
 #define kobj_to_state_obj(k) container_of(k, struct cpuidle_state_kobj, kobj)
 #define kobj_to_state(k) (kobj_to_state_obj(k)->state)
 #define kobj_to_state_usage(k) (kobj_to_state_obj(k)->state_usage)
@@ -356,17 +364,17 @@
 }
 
 /**
- * cpuidle_add_driver_sysfs - adds driver-specific sysfs attributes
+ * cpuidle_add_state_sysfs - adds cpuidle states sysfs attributes
  * @device: the target device
  */
-int cpuidle_add_state_sysfs(struct cpuidle_device *device)
+static int cpuidle_add_state_sysfs(struct cpuidle_device *device)
 {
 	int i, ret = -ENOMEM;
 	struct cpuidle_state_kobj *kobj;
-	struct cpuidle_driver *drv = cpuidle_get_driver();
+	struct cpuidle_driver *drv = cpuidle_get_cpu_driver(device);
 
 	/* state statistics */
-	for (i = 0; i < device->state_count; i++) {
+	for (i = 0; i < drv->state_count; i++) {
 		kobj = kzalloc(sizeof(struct cpuidle_state_kobj), GFP_KERNEL);
 		if (!kobj)
 			goto error_state;
@@ -374,8 +382,8 @@
 		kobj->state_usage = &device->states_usage[i];
 		init_completion(&kobj->kobj_unregister);
 
-		ret = kobject_init_and_add(&kobj->kobj, &ktype_state_cpuidle, &device->kobj,
-					   "state%d", i);
+		ret = kobject_init_and_add(&kobj->kobj, &ktype_state_cpuidle,
+					   &device->kobj, "state%d", i);
 		if (ret) {
 			kfree(kobj);
 			goto error_state;
@@ -393,10 +401,10 @@
 }
 
 /**
- * cpuidle_remove_driver_sysfs - removes driver-specific sysfs attributes
+ * cpuidle_remove_driver_sysfs - removes the cpuidle states sysfs attributes
  * @device: the target device
  */
-void cpuidle_remove_state_sysfs(struct cpuidle_device *device)
+static void cpuidle_remove_state_sysfs(struct cpuidle_device *device)
 {
 	int i;
 
@@ -404,17 +412,179 @@
 		cpuidle_free_state_kobj(device, i);
 }
 
+#ifdef CONFIG_CPU_IDLE_MULTIPLE_DRIVERS
+#define kobj_to_driver_kobj(k) container_of(k, struct cpuidle_driver_kobj, kobj)
+#define attr_to_driver_attr(a) container_of(a, struct cpuidle_driver_attr, attr)
+
+#define define_one_driver_ro(_name, show)                       \
+	static struct cpuidle_driver_attr attr_driver_##_name = \
+		__ATTR(_name, 0644, show, NULL)
+
+struct cpuidle_driver_kobj {
+	struct cpuidle_driver *drv;
+	struct completion kobj_unregister;
+	struct kobject kobj;
+};
+
+struct cpuidle_driver_attr {
+	struct attribute attr;
+	ssize_t (*show)(struct cpuidle_driver *, char *);
+	ssize_t (*store)(struct cpuidle_driver *, const char *, size_t);
+};
+
+static ssize_t show_driver_name(struct cpuidle_driver *drv, char *buf)
+{
+	ssize_t ret;
+
+	spin_lock(&cpuidle_driver_lock);
+	ret = sprintf(buf, "%s\n", drv ? drv->name : "none");
+	spin_unlock(&cpuidle_driver_lock);
+
+	return ret;
+}
+
+static void cpuidle_driver_sysfs_release(struct kobject *kobj)
+{
+	struct cpuidle_driver_kobj *driver_kobj = kobj_to_driver_kobj(kobj);
+	complete(&driver_kobj->kobj_unregister);
+}
+
+static ssize_t cpuidle_driver_show(struct kobject *kobj, struct attribute * attr,
+				   char * buf)
+{
+	int ret = -EIO;
+	struct cpuidle_driver_kobj *driver_kobj = kobj_to_driver_kobj(kobj);
+	struct cpuidle_driver_attr *dattr = attr_to_driver_attr(attr);
+
+	if (dattr->show)
+		ret = dattr->show(driver_kobj->drv, buf);
+
+	return ret;
+}
+
+static ssize_t cpuidle_driver_store(struct kobject *kobj, struct attribute *attr,
+				    const char *buf, size_t size)
+{
+	int ret = -EIO;
+	struct cpuidle_driver_kobj *driver_kobj = kobj_to_driver_kobj(kobj);
+	struct cpuidle_driver_attr *dattr = attr_to_driver_attr(attr);
+
+	if (dattr->store)
+		ret = dattr->store(driver_kobj->drv, buf, size);
+
+	return ret;
+}
+
+define_one_driver_ro(name, show_driver_name);
+
+static const struct sysfs_ops cpuidle_driver_sysfs_ops = {
+	.show = cpuidle_driver_show,
+	.store = cpuidle_driver_store,
+};
+
+static struct attribute *cpuidle_driver_default_attrs[] = {
+	&attr_driver_name.attr,
+	NULL
+};
+
+static struct kobj_type ktype_driver_cpuidle = {
+	.sysfs_ops = &cpuidle_driver_sysfs_ops,
+	.default_attrs = cpuidle_driver_default_attrs,
+	.release = cpuidle_driver_sysfs_release,
+};
+
+/**
+ * cpuidle_add_driver_sysfs - adds the driver name sysfs attribute
+ * @device: the target device
+ */
+static int cpuidle_add_driver_sysfs(struct cpuidle_device *dev)
+{
+	struct cpuidle_driver_kobj *kdrv;
+	struct cpuidle_driver *drv = cpuidle_get_cpu_driver(dev);
+	int ret;
+
+	kdrv = kzalloc(sizeof(*kdrv), GFP_KERNEL);
+	if (!kdrv)
+		return -ENOMEM;
+
+	kdrv->drv = drv;
+	init_completion(&kdrv->kobj_unregister);
+
+	ret = kobject_init_and_add(&kdrv->kobj, &ktype_driver_cpuidle,
+				   &dev->kobj, "driver");
+	if (ret) {
+		kfree(kdrv);
+		return ret;
+	}
+
+	kobject_uevent(&kdrv->kobj, KOBJ_ADD);
+	dev->kobj_driver = kdrv;
+
+	return ret;
+}
+
+/**
+ * cpuidle_remove_driver_sysfs - removes the driver name sysfs attribute
+ * @device: the target device
+ */
+static void cpuidle_remove_driver_sysfs(struct cpuidle_device *dev)
+{
+	struct cpuidle_driver_kobj *kdrv = dev->kobj_driver;
+	kobject_put(&kdrv->kobj);
+	wait_for_completion(&kdrv->kobj_unregister);
+	kfree(kdrv);
+}
+#else
+static inline int cpuidle_add_driver_sysfs(struct cpuidle_device *dev)
+{
+	return 0;
+}
+
+static inline void cpuidle_remove_driver_sysfs(struct cpuidle_device *dev)
+{
+	;
+}
+#endif
+
+/**
+ * cpuidle_add_device_sysfs - adds device specific sysfs attributes
+ * @device: the target device
+ */
+int cpuidle_add_device_sysfs(struct cpuidle_device *device)
+{
+	int ret;
+
+	ret = cpuidle_add_state_sysfs(device);
+	if (ret)
+		return ret;
+
+	ret = cpuidle_add_driver_sysfs(device);
+	if (ret)
+		cpuidle_remove_state_sysfs(device);
+	return ret;
+}
+
+/**
+ * cpuidle_remove_device_sysfs : removes device specific sysfs attributes
+ * @device : the target device
+ */
+void cpuidle_remove_device_sysfs(struct cpuidle_device *device)
+{
+	cpuidle_remove_driver_sysfs(device);
+	cpuidle_remove_state_sysfs(device);
+}
+
 /**
  * cpuidle_add_sysfs - creates a sysfs instance for the target device
  * @dev: the target device
  */
-int cpuidle_add_sysfs(struct device *cpu_dev)
+int cpuidle_add_sysfs(struct cpuidle_device *dev)
 {
-	int cpu = cpu_dev->id;
-	struct cpuidle_device *dev;
+	struct device *cpu_dev = get_cpu_device((unsigned long)dev->cpu);
 	int error;
 
-	dev = per_cpu(cpuidle_devices, cpu);
+	init_completion(&dev->kobj_unregister);
+
 	error = kobject_init_and_add(&dev->kobj, &ktype_cpuidle, &cpu_dev->kobj,
 				     "cpuidle");
 	if (!error)
@@ -426,11 +596,8 @@
  * cpuidle_remove_sysfs - deletes a sysfs instance on the target device
  * @dev: the target device
  */
-void cpuidle_remove_sysfs(struct device *cpu_dev)
+void cpuidle_remove_sysfs(struct cpuidle_device *dev)
 {
-	int cpu = cpu_dev->id;
-	struct cpuidle_device *dev;
-
-	dev = per_cpu(cpuidle_devices, cpu);
 	kobject_put(&dev->kobj);
+	wait_for_completion(&dev->kobj_unregister);
 }
diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig
index 308c7fb..f6644f5 100644
--- a/drivers/crypto/Kconfig
+++ b/drivers/crypto/Kconfig
@@ -224,7 +224,7 @@
 
 config CRYPTO_DEV_IXP4XX
 	tristate "Driver for IXP4xx crypto hardware acceleration"
-	depends on ARCH_IXP4XX
+	depends on ARCH_IXP4XX && IXP4XX_QMGR && IXP4XX_NPE
 	select CRYPTO_DES
 	select CRYPTO_ALGAPI
 	select CRYPTO_AUTHENC
diff --git a/drivers/crypto/ixp4xx_crypto.c b/drivers/crypto/ixp4xx_crypto.c
index 8f3f74c..21180d6 100644
--- a/drivers/crypto/ixp4xx_crypto.c
+++ b/drivers/crypto/ixp4xx_crypto.c
@@ -750,12 +750,12 @@
 	}
 	if (cipher_cfg & MOD_AES) {
 		switch (key_len) {
-			case 16: keylen_cfg = MOD_AES128 | KEYLEN_128; break;
-			case 24: keylen_cfg = MOD_AES192 | KEYLEN_192; break;
-			case 32: keylen_cfg = MOD_AES256 | KEYLEN_256; break;
-			default:
-				*flags |= CRYPTO_TFM_RES_BAD_KEY_LEN;
-				return -EINVAL;
+		case 16: keylen_cfg = MOD_AES128; break;
+		case 24: keylen_cfg = MOD_AES192; break;
+		case 32: keylen_cfg = MOD_AES256; break;
+		default:
+			*flags |= CRYPTO_TFM_RES_BAD_KEY_LEN;
+			return -EINVAL;
 		}
 		cipher_cfg |= keylen_cfg;
 	} else if (cipher_cfg & MOD_3DES) {
diff --git a/drivers/devfreq/Kconfig b/drivers/devfreq/Kconfig
index f6b0a6e2..0f079be 100644
--- a/drivers/devfreq/Kconfig
+++ b/drivers/devfreq/Kconfig
@@ -30,7 +30,7 @@
 comment "DEVFREQ Governors"
 
 config DEVFREQ_GOV_SIMPLE_ONDEMAND
-	bool "Simple Ondemand"
+	tristate "Simple Ondemand"
 	help
 	  Chooses frequency based on the recent load on the device. Works
 	  similar as ONDEMAND governor of CPUFREQ does. A device with
@@ -39,7 +39,7 @@
 	  values to the governor with data field at devfreq_add_device().
 
 config DEVFREQ_GOV_PERFORMANCE
-	bool "Performance"
+	tristate "Performance"
 	help
 	  Sets the frequency at the maximum available frequency.
 	  This governor always returns UINT_MAX as frequency so that
@@ -47,7 +47,7 @@
 	  at any time.
 
 config DEVFREQ_GOV_POWERSAVE
-	bool "Powersave"
+	tristate "Powersave"
 	help
 	  Sets the frequency at the minimum available frequency.
 	  This governor always returns 0 as frequency so that
@@ -55,7 +55,7 @@
 	  at any time.
 
 config DEVFREQ_GOV_USERSPACE
-	bool "Userspace"
+	tristate "Userspace"
 	help
 	  Sets the frequency at the user specified one.
 	  This governor returns the user configured frequency if there
diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c
index b146d76..53766f3 100644
--- a/drivers/devfreq/devfreq.c
+++ b/drivers/devfreq/devfreq.c
@@ -27,21 +27,17 @@
 #include <linux/hrtimer.h>
 #include "governor.h"
 
-struct class *devfreq_class;
+static struct class *devfreq_class;
 
 /*
- * devfreq_work periodically monitors every registered device.
- * The minimum polling interval is one jiffy. The polling interval is
- * determined by the minimum polling period among all polling devfreq
- * devices. The resolution of polling interval is one jiffy.
+ * devfreq core provides delayed work based load monitoring helper
+ * functions. Governors can use these or can implement their own
+ * monitoring mechanism.
  */
-static bool polling;
 static struct workqueue_struct *devfreq_wq;
-static struct delayed_work devfreq_work;
 
-/* wait removing if this is to be removed */
-static struct devfreq *wait_remove_device;
-
+/* The list of all device-devfreq governors */
+static LIST_HEAD(devfreq_governor_list);
 /* The list of all device-devfreq */
 static LIST_HEAD(devfreq_list);
 static DEFINE_MUTEX(devfreq_list_lock);
@@ -73,6 +69,79 @@
 }
 
 /**
+ * devfreq_get_freq_level() - Lookup freq_table for the frequency
+ * @devfreq:	the devfreq instance
+ * @freq:	the target frequency
+ */
+static int devfreq_get_freq_level(struct devfreq *devfreq, unsigned long freq)
+{
+	int lev;
+
+	for (lev = 0; lev < devfreq->profile->max_state; lev++)
+		if (freq == devfreq->profile->freq_table[lev])
+			return lev;
+
+	return -EINVAL;
+}
+
+/**
+ * devfreq_update_status() - Update statistics of devfreq behavior
+ * @devfreq:	the devfreq instance
+ * @freq:	the update target frequency
+ */
+static int devfreq_update_status(struct devfreq *devfreq, unsigned long freq)
+{
+	int lev, prev_lev;
+	unsigned long cur_time;
+
+	lev = devfreq_get_freq_level(devfreq, freq);
+	if (lev < 0)
+		return lev;
+
+	cur_time = jiffies;
+	devfreq->time_in_state[lev] +=
+			 cur_time - devfreq->last_stat_updated;
+	if (freq != devfreq->previous_freq) {
+		prev_lev = devfreq_get_freq_level(devfreq,
+						devfreq->previous_freq);
+		devfreq->trans_table[(prev_lev *
+				devfreq->profile->max_state) + lev]++;
+		devfreq->total_trans++;
+	}
+	devfreq->last_stat_updated = cur_time;
+
+	return 0;
+}
+
+/**
+ * find_devfreq_governor() - find devfreq governor from name
+ * @name:	name of the governor
+ *
+ * Search the list of devfreq governors and return the matched
+ * governor's pointer. devfreq_list_lock should be held by the caller.
+ */
+static struct devfreq_governor *find_devfreq_governor(const char *name)
+{
+	struct devfreq_governor *tmp_governor;
+
+	if (unlikely(IS_ERR_OR_NULL(name))) {
+		pr_err("DEVFREQ: %s: Invalid parameters\n", __func__);
+		return ERR_PTR(-EINVAL);
+	}
+	WARN(!mutex_is_locked(&devfreq_list_lock),
+	     "devfreq_list_lock must be locked.");
+
+	list_for_each_entry(tmp_governor, &devfreq_governor_list, node) {
+		if (!strncmp(tmp_governor->name, name, DEVFREQ_NAME_LEN))
+			return tmp_governor;
+	}
+
+	return ERR_PTR(-ENODEV);
+}
+
+/* Load monitoring helper functions for governors use */
+
+/**
  * update_devfreq() - Reevaluate the device and configure frequency.
  * @devfreq:	the devfreq instance.
  *
@@ -90,6 +159,9 @@
 		return -EINVAL;
 	}
 
+	if (!devfreq->governor)
+		return -EINVAL;
+
 	/* Reevaluate the proper frequency */
 	err = devfreq->governor->get_target_freq(devfreq, &freq);
 	if (err)
@@ -116,16 +188,173 @@
 	if (err)
 		return err;
 
+	if (devfreq->profile->freq_table)
+		if (devfreq_update_status(devfreq, freq))
+			dev_err(&devfreq->dev,
+				"Couldn't update frequency transition information.\n");
+
 	devfreq->previous_freq = freq;
 	return err;
 }
+EXPORT_SYMBOL(update_devfreq);
+
+/**
+ * devfreq_monitor() - Periodically poll devfreq objects.
+ * @work:	the work struct used to run devfreq_monitor periodically.
+ *
+ */
+static void devfreq_monitor(struct work_struct *work)
+{
+	int err;
+	struct devfreq *devfreq = container_of(work,
+					struct devfreq, work.work);
+
+	mutex_lock(&devfreq->lock);
+	err = update_devfreq(devfreq);
+	if (err)
+		dev_err(&devfreq->dev, "dvfs failed with (%d) error\n", err);
+
+	queue_delayed_work(devfreq_wq, &devfreq->work,
+				msecs_to_jiffies(devfreq->profile->polling_ms));
+	mutex_unlock(&devfreq->lock);
+}
+
+/**
+ * devfreq_monitor_start() - Start load monitoring of devfreq instance
+ * @devfreq:	the devfreq instance.
+ *
+ * Helper function for starting devfreq device load monitoing. By
+ * default delayed work based monitoring is supported. Function
+ * to be called from governor in response to DEVFREQ_GOV_START
+ * event when device is added to devfreq framework.
+ */
+void devfreq_monitor_start(struct devfreq *devfreq)
+{
+	INIT_DEFERRABLE_WORK(&devfreq->work, devfreq_monitor);
+	if (devfreq->profile->polling_ms)
+		queue_delayed_work(devfreq_wq, &devfreq->work,
+			msecs_to_jiffies(devfreq->profile->polling_ms));
+}
+EXPORT_SYMBOL(devfreq_monitor_start);
+
+/**
+ * devfreq_monitor_stop() - Stop load monitoring of a devfreq instance
+ * @devfreq:	the devfreq instance.
+ *
+ * Helper function to stop devfreq device load monitoing. Function
+ * to be called from governor in response to DEVFREQ_GOV_STOP
+ * event when device is removed from devfreq framework.
+ */
+void devfreq_monitor_stop(struct devfreq *devfreq)
+{
+	cancel_delayed_work_sync(&devfreq->work);
+}
+EXPORT_SYMBOL(devfreq_monitor_stop);
+
+/**
+ * devfreq_monitor_suspend() - Suspend load monitoring of a devfreq instance
+ * @devfreq:	the devfreq instance.
+ *
+ * Helper function to suspend devfreq device load monitoing. Function
+ * to be called from governor in response to DEVFREQ_GOV_SUSPEND
+ * event or when polling interval is set to zero.
+ *
+ * Note: Though this function is same as devfreq_monitor_stop(),
+ * intentionally kept separate to provide hooks for collecting
+ * transition statistics.
+ */
+void devfreq_monitor_suspend(struct devfreq *devfreq)
+{
+	mutex_lock(&devfreq->lock);
+	if (devfreq->stop_polling) {
+		mutex_unlock(&devfreq->lock);
+		return;
+	}
+
+	devfreq->stop_polling = true;
+	mutex_unlock(&devfreq->lock);
+	cancel_delayed_work_sync(&devfreq->work);
+}
+EXPORT_SYMBOL(devfreq_monitor_suspend);
+
+/**
+ * devfreq_monitor_resume() - Resume load monitoring of a devfreq instance
+ * @devfreq:    the devfreq instance.
+ *
+ * Helper function to resume devfreq device load monitoing. Function
+ * to be called from governor in response to DEVFREQ_GOV_RESUME
+ * event or when polling interval is set to non-zero.
+ */
+void devfreq_monitor_resume(struct devfreq *devfreq)
+{
+	mutex_lock(&devfreq->lock);
+	if (!devfreq->stop_polling)
+		goto out;
+
+	if (!delayed_work_pending(&devfreq->work) &&
+			devfreq->profile->polling_ms)
+		queue_delayed_work(devfreq_wq, &devfreq->work,
+			msecs_to_jiffies(devfreq->profile->polling_ms));
+	devfreq->stop_polling = false;
+
+out:
+	mutex_unlock(&devfreq->lock);
+}
+EXPORT_SYMBOL(devfreq_monitor_resume);
+
+/**
+ * devfreq_interval_update() - Update device devfreq monitoring interval
+ * @devfreq:    the devfreq instance.
+ * @delay:      new polling interval to be set.
+ *
+ * Helper function to set new load monitoring polling interval. Function
+ * to be called from governor in response to DEVFREQ_GOV_INTERVAL event.
+ */
+void devfreq_interval_update(struct devfreq *devfreq, unsigned int *delay)
+{
+	unsigned int cur_delay = devfreq->profile->polling_ms;
+	unsigned int new_delay = *delay;
+
+	mutex_lock(&devfreq->lock);
+	devfreq->profile->polling_ms = new_delay;
+
+	if (devfreq->stop_polling)
+		goto out;
+
+	/* if new delay is zero, stop polling */
+	if (!new_delay) {
+		mutex_unlock(&devfreq->lock);
+		cancel_delayed_work_sync(&devfreq->work);
+		return;
+	}
+
+	/* if current delay is zero, start polling with new delay */
+	if (!cur_delay) {
+		queue_delayed_work(devfreq_wq, &devfreq->work,
+			msecs_to_jiffies(devfreq->profile->polling_ms));
+		goto out;
+	}
+
+	/* if current delay is greater than new delay, restart polling */
+	if (cur_delay > new_delay) {
+		mutex_unlock(&devfreq->lock);
+		cancel_delayed_work_sync(&devfreq->work);
+		mutex_lock(&devfreq->lock);
+		if (!devfreq->stop_polling)
+			queue_delayed_work(devfreq_wq, &devfreq->work,
+			      msecs_to_jiffies(devfreq->profile->polling_ms));
+	}
+out:
+	mutex_unlock(&devfreq->lock);
+}
+EXPORT_SYMBOL(devfreq_interval_update);
 
 /**
  * devfreq_notifier_call() - Notify that the device frequency requirements
  *			   has been changed out of devfreq framework.
- * @nb		the notifier_block (supposed to be devfreq->nb)
- * @type	not used
- * @devp	not used
+ * @nb:		the notifier_block (supposed to be devfreq->nb)
+ * @type:	not used
+ * @devp:	not used
  *
  * Called by a notifier that uses devfreq->nb.
  */
@@ -143,59 +372,34 @@
 }
 
 /**
- * _remove_devfreq() - Remove devfreq from the device.
+ * _remove_devfreq() - Remove devfreq from the list and release its resources.
  * @devfreq:	the devfreq struct
  * @skip:	skip calling device_unregister().
- *
- * Note that the caller should lock devfreq->lock before calling
- * this. _remove_devfreq() will unlock it and free devfreq
- * internally. devfreq_list_lock should be locked by the caller
- * as well (not relased at return)
- *
- * Lock usage:
- * devfreq->lock: locked before call.
- *		  unlocked at return (and freed)
- * devfreq_list_lock: locked before call.
- *		      kept locked at return.
- *		      if devfreq is centrally polled.
- *
- * Freed memory:
- * devfreq
  */
 static void _remove_devfreq(struct devfreq *devfreq, bool skip)
 {
-	if (!mutex_is_locked(&devfreq->lock)) {
-		WARN(true, "devfreq->lock must be locked by the caller.\n");
+	mutex_lock(&devfreq_list_lock);
+	if (IS_ERR(find_device_devfreq(devfreq->dev.parent))) {
+		mutex_unlock(&devfreq_list_lock);
+		dev_warn(&devfreq->dev, "releasing devfreq which doesn't exist\n");
 		return;
 	}
-	if (!devfreq->governor->no_central_polling &&
-	    !mutex_is_locked(&devfreq_list_lock)) {
-		WARN(true, "devfreq_list_lock must be locked by the caller.\n");
-		return;
-	}
+	list_del(&devfreq->node);
+	mutex_unlock(&devfreq_list_lock);
 
-	if (devfreq->being_removed)
-		return;
-
-	devfreq->being_removed = true;
+	if (devfreq->governor)
+		devfreq->governor->event_handler(devfreq,
+						 DEVFREQ_GOV_STOP, NULL);
 
 	if (devfreq->profile->exit)
 		devfreq->profile->exit(devfreq->dev.parent);
 
-	if (devfreq->governor->exit)
-		devfreq->governor->exit(devfreq);
-
 	if (!skip && get_device(&devfreq->dev)) {
 		device_unregister(&devfreq->dev);
 		put_device(&devfreq->dev);
 	}
 
-	if (!devfreq->governor->no_central_polling)
-		list_del(&devfreq->node);
-
-	mutex_unlock(&devfreq->lock);
 	mutex_destroy(&devfreq->lock);
-
 	kfree(devfreq);
 }
 
@@ -210,163 +414,39 @@
 static void devfreq_dev_release(struct device *dev)
 {
 	struct devfreq *devfreq = to_devfreq(dev);
-	bool central_polling = !devfreq->governor->no_central_polling;
 
-	/*
-	 * If devfreq_dev_release() was called by device_unregister() of
-	 * _remove_devfreq(), we cannot mutex_lock(&devfreq->lock) and
-	 * being_removed is already set. This also partially checks the case
-	 * where devfreq_dev_release() is called from a thread other than
-	 * the one called _remove_devfreq(); however, this case is
-	 * dealt completely with another following being_removed check.
-	 *
-	 * Because being_removed is never being
-	 * unset, we do not need to worry about race conditions on
-	 * being_removed.
-	 */
-	if (devfreq->being_removed)
-		return;
-
-	if (central_polling)
-		mutex_lock(&devfreq_list_lock);
-
-	mutex_lock(&devfreq->lock);
-
-	/*
-	 * Check being_removed flag again for the case where
-	 * devfreq_dev_release() was called in a thread other than the one
-	 * possibly called _remove_devfreq().
-	 */
-	if (devfreq->being_removed) {
-		mutex_unlock(&devfreq->lock);
-		goto out;
-	}
-
-	/* devfreq->lock is unlocked and removed in _removed_devfreq() */
 	_remove_devfreq(devfreq, true);
-
-out:
-	if (central_polling)
-		mutex_unlock(&devfreq_list_lock);
-}
-
-/**
- * devfreq_monitor() - Periodically poll devfreq objects.
- * @work: the work struct used to run devfreq_monitor periodically.
- *
- */
-static void devfreq_monitor(struct work_struct *work)
-{
-	static unsigned long last_polled_at;
-	struct devfreq *devfreq, *tmp;
-	int error;
-	unsigned long jiffies_passed;
-	unsigned long next_jiffies = ULONG_MAX, now = jiffies;
-	struct device *dev;
-
-	/* Initially last_polled_at = 0, polling every device at bootup */
-	jiffies_passed = now - last_polled_at;
-	last_polled_at = now;
-	if (jiffies_passed == 0)
-		jiffies_passed = 1;
-
-	mutex_lock(&devfreq_list_lock);
-	list_for_each_entry_safe(devfreq, tmp, &devfreq_list, node) {
-		mutex_lock(&devfreq->lock);
-		dev = devfreq->dev.parent;
-
-		/* Do not remove tmp for a while */
-		wait_remove_device = tmp;
-
-		if (devfreq->governor->no_central_polling ||
-		    devfreq->next_polling == 0) {
-			mutex_unlock(&devfreq->lock);
-			continue;
-		}
-		mutex_unlock(&devfreq_list_lock);
-
-		/*
-		 * Reduce more next_polling if devfreq_wq took an extra
-		 * delay. (i.e., CPU has been idled.)
-		 */
-		if (devfreq->next_polling <= jiffies_passed) {
-			error = update_devfreq(devfreq);
-
-			/* Remove a devfreq with an error. */
-			if (error && error != -EAGAIN) {
-
-				dev_err(dev, "Due to update_devfreq error(%d), devfreq(%s) is removed from the device\n",
-					error, devfreq->governor->name);
-
-				/*
-				 * Unlock devfreq before locking the list
-				 * in order to avoid deadlock with
-				 * find_device_devfreq or others
-				 */
-				mutex_unlock(&devfreq->lock);
-				mutex_lock(&devfreq_list_lock);
-				/* Check if devfreq is already removed */
-				if (IS_ERR(find_device_devfreq(dev)))
-					continue;
-				mutex_lock(&devfreq->lock);
-				/* This unlocks devfreq->lock and free it */
-				_remove_devfreq(devfreq, false);
-				continue;
-			}
-			devfreq->next_polling = devfreq->polling_jiffies;
-		} else {
-			devfreq->next_polling -= jiffies_passed;
-		}
-
-		if (devfreq->next_polling)
-			next_jiffies = (next_jiffies > devfreq->next_polling) ?
-					devfreq->next_polling : next_jiffies;
-
-		mutex_unlock(&devfreq->lock);
-		mutex_lock(&devfreq_list_lock);
-	}
-	wait_remove_device = NULL;
-	mutex_unlock(&devfreq_list_lock);
-
-	if (next_jiffies > 0 && next_jiffies < ULONG_MAX) {
-		polling = true;
-		queue_delayed_work(devfreq_wq, &devfreq_work, next_jiffies);
-	} else {
-		polling = false;
-	}
 }
 
 /**
  * devfreq_add_device() - Add devfreq feature to the device
  * @dev:	the device to add devfreq feature.
  * @profile:	device-specific profile to run devfreq.
- * @governor:	the policy to choose frequency.
+ * @governor_name:	name of the policy to choose frequency.
  * @data:	private data for the governor. The devfreq framework does not
  *		touch this value.
  */
 struct devfreq *devfreq_add_device(struct device *dev,
 				   struct devfreq_dev_profile *profile,
-				   const struct devfreq_governor *governor,
+				   const char *governor_name,
 				   void *data)
 {
 	struct devfreq *devfreq;
+	struct devfreq_governor *governor;
 	int err = 0;
 
-	if (!dev || !profile || !governor) {
+	if (!dev || !profile || !governor_name) {
 		dev_err(dev, "%s: Invalid parameters.\n", __func__);
 		return ERR_PTR(-EINVAL);
 	}
 
-
-	if (!governor->no_central_polling) {
-		mutex_lock(&devfreq_list_lock);
-		devfreq = find_device_devfreq(dev);
-		mutex_unlock(&devfreq_list_lock);
-		if (!IS_ERR(devfreq)) {
-			dev_err(dev, "%s: Unable to create devfreq for the device. It already has one.\n", __func__);
-			err = -EINVAL;
-			goto err_out;
-		}
+	mutex_lock(&devfreq_list_lock);
+	devfreq = find_device_devfreq(dev);
+	mutex_unlock(&devfreq_list_lock);
+	if (!IS_ERR(devfreq)) {
+		dev_err(dev, "%s: Unable to create devfreq for the device. It already has one.\n", __func__);
+		err = -EINVAL;
+		goto err_out;
 	}
 
 	devfreq = kzalloc(sizeof(struct devfreq), GFP_KERNEL);
@@ -383,92 +463,316 @@
 	devfreq->dev.class = devfreq_class;
 	devfreq->dev.release = devfreq_dev_release;
 	devfreq->profile = profile;
-	devfreq->governor = governor;
+	strncpy(devfreq->governor_name, governor_name, DEVFREQ_NAME_LEN);
 	devfreq->previous_freq = profile->initial_freq;
 	devfreq->data = data;
-	devfreq->next_polling = devfreq->polling_jiffies
-			      = msecs_to_jiffies(devfreq->profile->polling_ms);
 	devfreq->nb.notifier_call = devfreq_notifier_call;
 
+	devfreq->trans_table =	devm_kzalloc(dev, sizeof(unsigned int) *
+						devfreq->profile->max_state *
+						devfreq->profile->max_state,
+						GFP_KERNEL);
+	devfreq->time_in_state = devm_kzalloc(dev, sizeof(unsigned int) *
+						devfreq->profile->max_state,
+						GFP_KERNEL);
+	devfreq->last_stat_updated = jiffies;
+
 	dev_set_name(&devfreq->dev, dev_name(dev));
 	err = device_register(&devfreq->dev);
 	if (err) {
 		put_device(&devfreq->dev);
+		mutex_unlock(&devfreq->lock);
 		goto err_dev;
 	}
 
-	if (governor->init)
-		err = governor->init(devfreq);
-	if (err)
-		goto err_init;
-
 	mutex_unlock(&devfreq->lock);
 
-	if (governor->no_central_polling)
-		goto out;
-
 	mutex_lock(&devfreq_list_lock);
-
 	list_add(&devfreq->node, &devfreq_list);
 
-	if (devfreq_wq && devfreq->next_polling && !polling) {
-		polling = true;
-		queue_delayed_work(devfreq_wq, &devfreq_work,
-				   devfreq->next_polling);
-	}
+	governor = find_devfreq_governor(devfreq->governor_name);
+	if (!IS_ERR(governor))
+		devfreq->governor = governor;
+	if (devfreq->governor)
+		err = devfreq->governor->event_handler(devfreq,
+					DEVFREQ_GOV_START, NULL);
 	mutex_unlock(&devfreq_list_lock);
-out:
+	if (err) {
+		dev_err(dev, "%s: Unable to start governor for the device\n",
+			__func__);
+		goto err_init;
+	}
+
 	return devfreq;
 
 err_init:
+	list_del(&devfreq->node);
 	device_unregister(&devfreq->dev);
 err_dev:
-	mutex_unlock(&devfreq->lock);
 	kfree(devfreq);
 err_out:
 	return ERR_PTR(err);
 }
+EXPORT_SYMBOL(devfreq_add_device);
 
 /**
  * devfreq_remove_device() - Remove devfreq feature from a device.
- * @devfreq	the devfreq instance to be removed
+ * @devfreq:	the devfreq instance to be removed
  */
 int devfreq_remove_device(struct devfreq *devfreq)
 {
-	bool central_polling;
-
 	if (!devfreq)
 		return -EINVAL;
 
-	central_polling = !devfreq->governor->no_central_polling;
-
-	if (central_polling) {
-		mutex_lock(&devfreq_list_lock);
-		while (wait_remove_device == devfreq) {
-			mutex_unlock(&devfreq_list_lock);
-			schedule();
-			mutex_lock(&devfreq_list_lock);
-		}
-	}
-
-	mutex_lock(&devfreq->lock);
-	_remove_devfreq(devfreq, false); /* it unlocks devfreq->lock */
-
-	if (central_polling)
-		mutex_unlock(&devfreq_list_lock);
+	_remove_devfreq(devfreq, false);
 
 	return 0;
 }
+EXPORT_SYMBOL(devfreq_remove_device);
+
+/**
+ * devfreq_suspend_device() - Suspend devfreq of a device.
+ * @devfreq: the devfreq instance to be suspended
+ */
+int devfreq_suspend_device(struct devfreq *devfreq)
+{
+	if (!devfreq)
+		return -EINVAL;
+
+	if (!devfreq->governor)
+		return 0;
+
+	return devfreq->governor->event_handler(devfreq,
+				DEVFREQ_GOV_SUSPEND, NULL);
+}
+EXPORT_SYMBOL(devfreq_suspend_device);
+
+/**
+ * devfreq_resume_device() - Resume devfreq of a device.
+ * @devfreq: the devfreq instance to be resumed
+ */
+int devfreq_resume_device(struct devfreq *devfreq)
+{
+	if (!devfreq)
+		return -EINVAL;
+
+	if (!devfreq->governor)
+		return 0;
+
+	return devfreq->governor->event_handler(devfreq,
+				DEVFREQ_GOV_RESUME, NULL);
+}
+EXPORT_SYMBOL(devfreq_resume_device);
+
+/**
+ * devfreq_add_governor() - Add devfreq governor
+ * @governor:	the devfreq governor to be added
+ */
+int devfreq_add_governor(struct devfreq_governor *governor)
+{
+	struct devfreq_governor *g;
+	struct devfreq *devfreq;
+	int err = 0;
+
+	if (!governor) {
+		pr_err("%s: Invalid parameters.\n", __func__);
+		return -EINVAL;
+	}
+
+	mutex_lock(&devfreq_list_lock);
+	g = find_devfreq_governor(governor->name);
+	if (!IS_ERR(g)) {
+		pr_err("%s: governor %s already registered\n", __func__,
+		       g->name);
+		err = -EINVAL;
+		goto err_out;
+	}
+
+	list_add(&governor->node, &devfreq_governor_list);
+
+	list_for_each_entry(devfreq, &devfreq_list, node) {
+		int ret = 0;
+		struct device *dev = devfreq->dev.parent;
+
+		if (!strncmp(devfreq->governor_name, governor->name,
+			     DEVFREQ_NAME_LEN)) {
+			/* The following should never occur */
+			if (devfreq->governor) {
+				dev_warn(dev,
+					 "%s: Governor %s already present\n",
+					 __func__, devfreq->governor->name);
+				ret = devfreq->governor->event_handler(devfreq,
+							DEVFREQ_GOV_STOP, NULL);
+				if (ret) {
+					dev_warn(dev,
+						 "%s: Governor %s stop = %d\n",
+						 __func__,
+						 devfreq->governor->name, ret);
+				}
+				/* Fall through */
+			}
+			devfreq->governor = governor;
+			ret = devfreq->governor->event_handler(devfreq,
+						DEVFREQ_GOV_START, NULL);
+			if (ret) {
+				dev_warn(dev, "%s: Governor %s start=%d\n",
+					 __func__, devfreq->governor->name,
+					 ret);
+			}
+		}
+	}
+
+err_out:
+	mutex_unlock(&devfreq_list_lock);
+
+	return err;
+}
+EXPORT_SYMBOL(devfreq_add_governor);
+
+/**
+ * devfreq_remove_device() - Remove devfreq feature from a device.
+ * @governor:	the devfreq governor to be removed
+ */
+int devfreq_remove_governor(struct devfreq_governor *governor)
+{
+	struct devfreq_governor *g;
+	struct devfreq *devfreq;
+	int err = 0;
+
+	if (!governor) {
+		pr_err("%s: Invalid parameters.\n", __func__);
+		return -EINVAL;
+	}
+
+	mutex_lock(&devfreq_list_lock);
+	g = find_devfreq_governor(governor->name);
+	if (IS_ERR(g)) {
+		pr_err("%s: governor %s not registered\n", __func__,
+		       governor->name);
+		err = PTR_ERR(g);
+		goto err_out;
+	}
+	list_for_each_entry(devfreq, &devfreq_list, node) {
+		int ret;
+		struct device *dev = devfreq->dev.parent;
+
+		if (!strncmp(devfreq->governor_name, governor->name,
+			     DEVFREQ_NAME_LEN)) {
+			/* we should have a devfreq governor! */
+			if (!devfreq->governor) {
+				dev_warn(dev, "%s: Governor %s NOT present\n",
+					 __func__, governor->name);
+				continue;
+				/* Fall through */
+			}
+			ret = devfreq->governor->event_handler(devfreq,
+						DEVFREQ_GOV_STOP, NULL);
+			if (ret) {
+				dev_warn(dev, "%s: Governor %s stop=%d\n",
+					 __func__, devfreq->governor->name,
+					 ret);
+			}
+			devfreq->governor = NULL;
+		}
+	}
+
+	list_del(&governor->node);
+err_out:
+	mutex_unlock(&devfreq_list_lock);
+
+	return err;
+}
+EXPORT_SYMBOL(devfreq_remove_governor);
 
 static ssize_t show_governor(struct device *dev,
 			     struct device_attribute *attr, char *buf)
 {
+	if (!to_devfreq(dev)->governor)
+		return -EINVAL;
+
 	return sprintf(buf, "%s\n", to_devfreq(dev)->governor->name);
 }
 
+static ssize_t store_governor(struct device *dev, struct device_attribute *attr,
+			      const char *buf, size_t count)
+{
+	struct devfreq *df = to_devfreq(dev);
+	int ret;
+	char str_governor[DEVFREQ_NAME_LEN + 1];
+	struct devfreq_governor *governor;
+
+	ret = sscanf(buf, "%" __stringify(DEVFREQ_NAME_LEN) "s", str_governor);
+	if (ret != 1)
+		return -EINVAL;
+
+	mutex_lock(&devfreq_list_lock);
+	governor = find_devfreq_governor(str_governor);
+	if (IS_ERR(governor)) {
+		ret = PTR_ERR(governor);
+		goto out;
+	}
+	if (df->governor == governor)
+		goto out;
+
+	if (df->governor) {
+		ret = df->governor->event_handler(df, DEVFREQ_GOV_STOP, NULL);
+		if (ret) {
+			dev_warn(dev, "%s: Governor %s not stopped(%d)\n",
+				 __func__, df->governor->name, ret);
+			goto out;
+		}
+	}
+	df->governor = governor;
+	strncpy(df->governor_name, governor->name, DEVFREQ_NAME_LEN);
+	ret = df->governor->event_handler(df, DEVFREQ_GOV_START, NULL);
+	if (ret)
+		dev_warn(dev, "%s: Governor %s not started(%d)\n",
+			 __func__, df->governor->name, ret);
+out:
+	mutex_unlock(&devfreq_list_lock);
+
+	if (!ret)
+		ret = count;
+	return ret;
+}
+static ssize_t show_available_governors(struct device *d,
+				    struct device_attribute *attr,
+				    char *buf)
+{
+	struct devfreq_governor *tmp_governor;
+	ssize_t count = 0;
+
+	mutex_lock(&devfreq_list_lock);
+	list_for_each_entry(tmp_governor, &devfreq_governor_list, node)
+		count += scnprintf(&buf[count], (PAGE_SIZE - count - 2),
+				   "%s ", tmp_governor->name);
+	mutex_unlock(&devfreq_list_lock);
+
+	/* Truncate the trailing space */
+	if (count)
+		count--;
+
+	count += sprintf(&buf[count], "\n");
+
+	return count;
+}
+
 static ssize_t show_freq(struct device *dev,
 			 struct device_attribute *attr, char *buf)
 {
+	unsigned long freq;
+	struct devfreq *devfreq = to_devfreq(dev);
+
+	if (devfreq->profile->get_cur_freq &&
+		!devfreq->profile->get_cur_freq(devfreq->dev.parent, &freq))
+			return sprintf(buf, "%lu\n", freq);
+
+	return sprintf(buf, "%lu\n", devfreq->previous_freq);
+}
+
+static ssize_t show_target_freq(struct device *dev,
+			struct device_attribute *attr, char *buf)
+{
 	return sprintf(buf, "%lu\n", to_devfreq(dev)->previous_freq);
 }
 
@@ -486,39 +790,19 @@
 	unsigned int value;
 	int ret;
 
+	if (!df->governor)
+		return -EINVAL;
+
 	ret = sscanf(buf, "%u", &value);
 	if (ret != 1)
-		goto out;
+		return -EINVAL;
 
-	mutex_lock(&df->lock);
-	df->profile->polling_ms = value;
-	df->next_polling = df->polling_jiffies
-			 = msecs_to_jiffies(value);
-	mutex_unlock(&df->lock);
-
+	df->governor->event_handler(df, DEVFREQ_GOV_INTERVAL, &value);
 	ret = count;
 
-	if (df->governor->no_central_polling)
-		goto out;
-
-	mutex_lock(&devfreq_list_lock);
-	if (df->next_polling > 0 && !polling) {
-		polling = true;
-		queue_delayed_work(devfreq_wq, &devfreq_work,
-				   df->next_polling);
-	}
-	mutex_unlock(&devfreq_list_lock);
-out:
 	return ret;
 }
 
-static ssize_t show_central_polling(struct device *dev,
-				    struct device_attribute *attr, char *buf)
-{
-	return sprintf(buf, "%d\n",
-		       !to_devfreq(dev)->governor->no_central_polling);
-}
-
 static ssize_t store_min_freq(struct device *dev, struct device_attribute *attr,
 			      const char *buf, size_t count)
 {
@@ -529,7 +813,7 @@
 
 	ret = sscanf(buf, "%lu", &value);
 	if (ret != 1)
-		goto out;
+		return -EINVAL;
 
 	mutex_lock(&df->lock);
 	max = df->max_freq;
@@ -543,7 +827,6 @@
 	ret = count;
 unlock:
 	mutex_unlock(&df->lock);
-out:
 	return ret;
 }
 
@@ -563,7 +846,7 @@
 
 	ret = sscanf(buf, "%lu", &value);
 	if (ret != 1)
-		goto out;
+		return -EINVAL;
 
 	mutex_lock(&df->lock);
 	min = df->min_freq;
@@ -577,7 +860,6 @@
 	ret = count;
 unlock:
 	mutex_unlock(&df->lock);
-out:
 	return ret;
 }
 
@@ -587,34 +869,92 @@
 	return sprintf(buf, "%lu\n", to_devfreq(dev)->max_freq);
 }
 
+static ssize_t show_available_freqs(struct device *d,
+				    struct device_attribute *attr,
+				    char *buf)
+{
+	struct devfreq *df = to_devfreq(d);
+	struct device *dev = df->dev.parent;
+	struct opp *opp;
+	ssize_t count = 0;
+	unsigned long freq = 0;
+
+	rcu_read_lock();
+	do {
+		opp = opp_find_freq_ceil(dev, &freq);
+		if (IS_ERR(opp))
+			break;
+
+		count += scnprintf(&buf[count], (PAGE_SIZE - count - 2),
+				   "%lu ", freq);
+		freq++;
+	} while (1);
+	rcu_read_unlock();
+
+	/* Truncate the trailing space */
+	if (count)
+		count--;
+
+	count += sprintf(&buf[count], "\n");
+
+	return count;
+}
+
+static ssize_t show_trans_table(struct device *dev, struct device_attribute *attr,
+				char *buf)
+{
+	struct devfreq *devfreq = to_devfreq(dev);
+	ssize_t len;
+	int i, j, err;
+	unsigned int max_state = devfreq->profile->max_state;
+
+	err = devfreq_update_status(devfreq, devfreq->previous_freq);
+	if (err)
+		return 0;
+
+	len = sprintf(buf, "   From  :   To\n");
+	len += sprintf(buf + len, "         :");
+	for (i = 0; i < max_state; i++)
+		len += sprintf(buf + len, "%8u",
+				devfreq->profile->freq_table[i]);
+
+	len += sprintf(buf + len, "   time(ms)\n");
+
+	for (i = 0; i < max_state; i++) {
+		if (devfreq->profile->freq_table[i]
+					== devfreq->previous_freq) {
+			len += sprintf(buf + len, "*");
+		} else {
+			len += sprintf(buf + len, " ");
+		}
+		len += sprintf(buf + len, "%8u:",
+				devfreq->profile->freq_table[i]);
+		for (j = 0; j < max_state; j++)
+			len += sprintf(buf + len, "%8u",
+				devfreq->trans_table[(i * max_state) + j]);
+		len += sprintf(buf + len, "%10u\n",
+			jiffies_to_msecs(devfreq->time_in_state[i]));
+	}
+
+	len += sprintf(buf + len, "Total transition : %u\n",
+					devfreq->total_trans);
+	return len;
+}
+
 static struct device_attribute devfreq_attrs[] = {
-	__ATTR(governor, S_IRUGO, show_governor, NULL),
+	__ATTR(governor, S_IRUGO | S_IWUSR, show_governor, store_governor),
+	__ATTR(available_governors, S_IRUGO, show_available_governors, NULL),
 	__ATTR(cur_freq, S_IRUGO, show_freq, NULL),
-	__ATTR(central_polling, S_IRUGO, show_central_polling, NULL),
+	__ATTR(available_frequencies, S_IRUGO, show_available_freqs, NULL),
+	__ATTR(target_freq, S_IRUGO, show_target_freq, NULL),
 	__ATTR(polling_interval, S_IRUGO | S_IWUSR, show_polling_interval,
 	       store_polling_interval),
 	__ATTR(min_freq, S_IRUGO | S_IWUSR, show_min_freq, store_min_freq),
 	__ATTR(max_freq, S_IRUGO | S_IWUSR, show_max_freq, store_max_freq),
+	__ATTR(trans_stat, S_IRUGO, show_trans_table, NULL),
 	{ },
 };
 
-/**
- * devfreq_start_polling() - Initialize data structure for devfreq framework and
- *			   start polling registered devfreq devices.
- */
-static int __init devfreq_start_polling(void)
-{
-	mutex_lock(&devfreq_list_lock);
-	polling = false;
-	devfreq_wq = create_freezable_workqueue("devfreq_wq");
-	INIT_DEFERRABLE_WORK(&devfreq_work, devfreq_monitor);
-	mutex_unlock(&devfreq_list_lock);
-
-	devfreq_monitor(&devfreq_work.work);
-	return 0;
-}
-late_initcall(devfreq_start_polling);
-
 static int __init devfreq_init(void)
 {
 	devfreq_class = class_create(THIS_MODULE, "devfreq");
@@ -622,7 +962,15 @@
 		pr_err("%s: couldn't create class\n", __FILE__);
 		return PTR_ERR(devfreq_class);
 	}
+
+	devfreq_wq = create_freezable_workqueue("devfreq_wq");
+	if (IS_ERR(devfreq_wq)) {
+		class_destroy(devfreq_class);
+		pr_err("%s: couldn't create workqueue\n", __FILE__);
+		return PTR_ERR(devfreq_wq);
+	}
 	devfreq_class->dev_attrs = devfreq_attrs;
+
 	return 0;
 }
 subsys_initcall(devfreq_init);
@@ -630,6 +978,7 @@
 static void __exit devfreq_exit(void)
 {
 	class_destroy(devfreq_class);
+	destroy_workqueue(devfreq_wq);
 }
 module_exit(devfreq_exit);
 
@@ -641,9 +990,9 @@
 /**
  * devfreq_recommended_opp() - Helper function to get proper OPP for the
  *			     freq value given to target callback.
- * @dev		The devfreq user device. (parent of devfreq)
- * @freq	The frequency given to target function
- * @flags	Flags handed from devfreq framework.
+ * @dev:	The devfreq user device. (parent of devfreq)
+ * @freq:	The frequency given to target function
+ * @flags:	Flags handed from devfreq framework.
  *
  */
 struct opp *devfreq_recommended_opp(struct device *dev, unsigned long *freq,
@@ -656,14 +1005,14 @@
 		opp = opp_find_freq_floor(dev, freq);
 
 		/* If not available, use the closest opp */
-		if (opp == ERR_PTR(-ENODEV))
+		if (opp == ERR_PTR(-ERANGE))
 			opp = opp_find_freq_ceil(dev, freq);
 	} else {
 		/* The freq is an lower bound. opp should be higher */
 		opp = opp_find_freq_ceil(dev, freq);
 
 		/* If not available, use the closest opp */
-		if (opp == ERR_PTR(-ENODEV))
+		if (opp == ERR_PTR(-ERANGE))
 			opp = opp_find_freq_floor(dev, freq);
 	}
 
@@ -674,35 +1023,49 @@
  * devfreq_register_opp_notifier() - Helper function to get devfreq notified
  *				   for any changes in the OPP availability
  *				   changes
- * @dev		The devfreq user device. (parent of devfreq)
- * @devfreq	The devfreq object.
+ * @dev:	The devfreq user device. (parent of devfreq)
+ * @devfreq:	The devfreq object.
  */
 int devfreq_register_opp_notifier(struct device *dev, struct devfreq *devfreq)
 {
-	struct srcu_notifier_head *nh = opp_get_notifier(dev);
+	struct srcu_notifier_head *nh;
+	int ret = 0;
 
+	rcu_read_lock();
+	nh = opp_get_notifier(dev);
 	if (IS_ERR(nh))
-		return PTR_ERR(nh);
-	return srcu_notifier_chain_register(nh, &devfreq->nb);
+		ret = PTR_ERR(nh);
+	rcu_read_unlock();
+	if (!ret)
+		ret = srcu_notifier_chain_register(nh, &devfreq->nb);
+
+	return ret;
 }
 
 /**
  * devfreq_unregister_opp_notifier() - Helper function to stop getting devfreq
  *				     notified for any changes in the OPP
  *				     availability changes anymore.
- * @dev		The devfreq user device. (parent of devfreq)
- * @devfreq	The devfreq object.
+ * @dev:	The devfreq user device. (parent of devfreq)
+ * @devfreq:	The devfreq object.
  *
  * At exit() callback of devfreq_dev_profile, this must be included if
  * devfreq_recommended_opp is used.
  */
 int devfreq_unregister_opp_notifier(struct device *dev, struct devfreq *devfreq)
 {
-	struct srcu_notifier_head *nh = opp_get_notifier(dev);
+	struct srcu_notifier_head *nh;
+	int ret = 0;
 
+	rcu_read_lock();
+	nh = opp_get_notifier(dev);
 	if (IS_ERR(nh))
-		return PTR_ERR(nh);
-	return srcu_notifier_chain_unregister(nh, &devfreq->nb);
+		ret = PTR_ERR(nh);
+	rcu_read_unlock();
+	if (!ret)
+		ret = srcu_notifier_chain_unregister(nh, &devfreq->nb);
+
+	return ret;
 }
 
 MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");
diff --git a/drivers/devfreq/exynos4_bus.c b/drivers/devfreq/exynos4_bus.c
index 88ddc77..7418372 100644
--- a/drivers/devfreq/exynos4_bus.c
+++ b/drivers/devfreq/exynos4_bus.c
@@ -987,7 +987,7 @@
 	struct device *dev = &pdev->dev;
 	int err = 0;
 
-	data = kzalloc(sizeof(struct busfreq_data), GFP_KERNEL);
+	data = devm_kzalloc(&pdev->dev, sizeof(struct busfreq_data), GFP_KERNEL);
 	if (data == NULL) {
 		dev_err(dev, "Cannot allocate memory.\n");
 		return -ENOMEM;
@@ -1012,31 +1012,26 @@
 		err = -EINVAL;
 	}
 	if (err)
-		goto err_regulator;
+		return err;
 
-	data->vdd_int = regulator_get(dev, "vdd_int");
+	data->vdd_int = devm_regulator_get(dev, "vdd_int");
 	if (IS_ERR(data->vdd_int)) {
 		dev_err(dev, "Cannot get the regulator \"vdd_int\"\n");
-		err = PTR_ERR(data->vdd_int);
-		goto err_regulator;
+		return PTR_ERR(data->vdd_int);
 	}
 	if (data->type == TYPE_BUSF_EXYNOS4x12) {
-		data->vdd_mif = regulator_get(dev, "vdd_mif");
+		data->vdd_mif = devm_regulator_get(dev, "vdd_mif");
 		if (IS_ERR(data->vdd_mif)) {
 			dev_err(dev, "Cannot get the regulator \"vdd_mif\"\n");
-			err = PTR_ERR(data->vdd_mif);
-			regulator_put(data->vdd_int);
-			goto err_regulator;
-
+			return PTR_ERR(data->vdd_mif);
 		}
 	}
 
 	opp = opp_find_freq_floor(dev, &exynos4_devfreq_profile.initial_freq);
 	if (IS_ERR(opp)) {
 		dev_err(dev, "Invalid initial frequency %lu kHz.\n",
-		       exynos4_devfreq_profile.initial_freq);
-		err = PTR_ERR(opp);
-		goto err_opp_add;
+			exynos4_devfreq_profile.initial_freq);
+		return PTR_ERR(opp);
 	}
 	data->curr_opp = opp;
 
@@ -1045,30 +1040,20 @@
 	busfreq_mon_reset(data);
 
 	data->devfreq = devfreq_add_device(dev, &exynos4_devfreq_profile,
-					   &devfreq_simple_ondemand, NULL);
-	if (IS_ERR(data->devfreq)) {
-		err = PTR_ERR(data->devfreq);
-		goto err_opp_add;
-	}
+					   "simple_ondemand", NULL);
+	if (IS_ERR(data->devfreq))
+		return PTR_ERR(data->devfreq);
 
 	devfreq_register_opp_notifier(dev, data->devfreq);
 
 	err = register_pm_notifier(&data->pm_notifier);
 	if (err) {
 		dev_err(dev, "Failed to setup pm notifier\n");
-		goto err_devfreq_add;
+		devfreq_remove_device(data->devfreq);
+		return err;
 	}
 
 	return 0;
-err_devfreq_add:
-	devfreq_remove_device(data->devfreq);
-err_opp_add:
-	if (data->vdd_mif)
-		regulator_put(data->vdd_mif);
-	regulator_put(data->vdd_int);
-err_regulator:
-	kfree(data);
-	return err;
 }
 
 static __devexit int exynos4_busfreq_remove(struct platform_device *pdev)
@@ -1077,10 +1062,6 @@
 
 	unregister_pm_notifier(&data->pm_notifier);
 	devfreq_remove_device(data->devfreq);
-	regulator_put(data->vdd_int);
-	if (data->vdd_mif)
-		regulator_put(data->vdd_mif);
-	kfree(data);
 
 	return 0;
 }
diff --git a/drivers/devfreq/governor.h b/drivers/devfreq/governor.h
index ea7f13c..fad7d63 100644
--- a/drivers/devfreq/governor.h
+++ b/drivers/devfreq/governor.h
@@ -18,7 +18,24 @@
 
 #define to_devfreq(DEV)	container_of((DEV), struct devfreq, dev)
 
+/* Devfreq events */
+#define DEVFREQ_GOV_START			0x1
+#define DEVFREQ_GOV_STOP			0x2
+#define DEVFREQ_GOV_INTERVAL			0x3
+#define DEVFREQ_GOV_SUSPEND			0x4
+#define DEVFREQ_GOV_RESUME			0x5
+
 /* Caution: devfreq->lock must be locked before calling update_devfreq */
 extern int update_devfreq(struct devfreq *devfreq);
 
+extern void devfreq_monitor_start(struct devfreq *devfreq);
+extern void devfreq_monitor_stop(struct devfreq *devfreq);
+extern void devfreq_monitor_suspend(struct devfreq *devfreq);
+extern void devfreq_monitor_resume(struct devfreq *devfreq);
+extern void devfreq_interval_update(struct devfreq *devfreq,
+					unsigned int *delay);
+
+extern int devfreq_add_governor(struct devfreq_governor *governor);
+extern int devfreq_remove_governor(struct devfreq_governor *governor);
+
 #endif /* _GOVERNOR_H */
diff --git a/drivers/devfreq/governor_performance.c b/drivers/devfreq/governor_performance.c
index af75ddd..c72f942 100644
--- a/drivers/devfreq/governor_performance.c
+++ b/drivers/devfreq/governor_performance.c
@@ -10,6 +10,7 @@
  */
 
 #include <linux/devfreq.h>
+#include <linux/module.h>
 #include "governor.h"
 
 static int devfreq_performance_func(struct devfreq *df,
@@ -26,14 +27,41 @@
 	return 0;
 }
 
-static int performance_init(struct devfreq *devfreq)
+static int devfreq_performance_handler(struct devfreq *devfreq,
+				unsigned int event, void *data)
 {
-	return update_devfreq(devfreq);
+	int ret = 0;
+
+	if (event == DEVFREQ_GOV_START) {
+		mutex_lock(&devfreq->lock);
+		ret = update_devfreq(devfreq);
+		mutex_unlock(&devfreq->lock);
+	}
+
+	return ret;
 }
 
-const struct devfreq_governor devfreq_performance = {
+static struct devfreq_governor devfreq_performance = {
 	.name = "performance",
-	.init = performance_init,
 	.get_target_freq = devfreq_performance_func,
-	.no_central_polling = true,
+	.event_handler = devfreq_performance_handler,
 };
+
+static int __init devfreq_performance_init(void)
+{
+	return devfreq_add_governor(&devfreq_performance);
+}
+subsys_initcall(devfreq_performance_init);
+
+static void __exit devfreq_performance_exit(void)
+{
+	int ret;
+
+	ret = devfreq_remove_governor(&devfreq_performance);
+	if (ret)
+		pr_err("%s: failed remove governor %d\n", __func__, ret);
+
+	return;
+}
+module_exit(devfreq_performance_exit);
+MODULE_LICENSE("GPL");
diff --git a/drivers/devfreq/governor_powersave.c b/drivers/devfreq/governor_powersave.c
index fec0cdb..0c6bed5 100644
--- a/drivers/devfreq/governor_powersave.c
+++ b/drivers/devfreq/governor_powersave.c
@@ -10,6 +10,7 @@
  */
 
 #include <linux/devfreq.h>
+#include <linux/module.h>
 #include "governor.h"
 
 static int devfreq_powersave_func(struct devfreq *df,
@@ -23,14 +24,41 @@
 	return 0;
 }
 
-static int powersave_init(struct devfreq *devfreq)
+static int devfreq_powersave_handler(struct devfreq *devfreq,
+				unsigned int event, void *data)
 {
-	return update_devfreq(devfreq);
+	int ret = 0;
+
+	if (event == DEVFREQ_GOV_START) {
+		mutex_lock(&devfreq->lock);
+		ret = update_devfreq(devfreq);
+		mutex_unlock(&devfreq->lock);
+	}
+
+	return ret;
 }
 
-const struct devfreq_governor devfreq_powersave = {
+static struct devfreq_governor devfreq_powersave = {
 	.name = "powersave",
-	.init = powersave_init,
 	.get_target_freq = devfreq_powersave_func,
-	.no_central_polling = true,
+	.event_handler = devfreq_powersave_handler,
 };
+
+static int __init devfreq_powersave_init(void)
+{
+	return devfreq_add_governor(&devfreq_powersave);
+}
+subsys_initcall(devfreq_powersave_init);
+
+static void __exit devfreq_powersave_exit(void)
+{
+	int ret;
+
+	ret = devfreq_remove_governor(&devfreq_powersave);
+	if (ret)
+		pr_err("%s: failed remove governor %d\n", __func__, ret);
+
+	return;
+}
+module_exit(devfreq_powersave_exit);
+MODULE_LICENSE("GPL");
diff --git a/drivers/devfreq/governor_simpleondemand.c b/drivers/devfreq/governor_simpleondemand.c
index a2e3eae..0720ba8 100644
--- a/drivers/devfreq/governor_simpleondemand.c
+++ b/drivers/devfreq/governor_simpleondemand.c
@@ -10,8 +10,10 @@
  */
 
 #include <linux/errno.h>
+#include <linux/module.h>
 #include <linux/devfreq.h>
 #include <linux/math64.h>
+#include "governor.h"
 
 /* Default constants for DevFreq-Simple-Ondemand (DFSO) */
 #define DFSO_UPTHRESHOLD	(90)
@@ -88,7 +90,58 @@
 	return 0;
 }
 
-const struct devfreq_governor devfreq_simple_ondemand = {
+static int devfreq_simple_ondemand_handler(struct devfreq *devfreq,
+				unsigned int event, void *data)
+{
+	switch (event) {
+	case DEVFREQ_GOV_START:
+		devfreq_monitor_start(devfreq);
+		break;
+
+	case DEVFREQ_GOV_STOP:
+		devfreq_monitor_stop(devfreq);
+		break;
+
+	case DEVFREQ_GOV_INTERVAL:
+		devfreq_interval_update(devfreq, (unsigned int *)data);
+		break;
+
+	case DEVFREQ_GOV_SUSPEND:
+		devfreq_monitor_suspend(devfreq);
+		break;
+
+	case DEVFREQ_GOV_RESUME:
+		devfreq_monitor_resume(devfreq);
+		break;
+
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static struct devfreq_governor devfreq_simple_ondemand = {
 	.name = "simple_ondemand",
 	.get_target_freq = devfreq_simple_ondemand_func,
+	.event_handler = devfreq_simple_ondemand_handler,
 };
+
+static int __init devfreq_simple_ondemand_init(void)
+{
+	return devfreq_add_governor(&devfreq_simple_ondemand);
+}
+subsys_initcall(devfreq_simple_ondemand_init);
+
+static void __exit devfreq_simple_ondemand_exit(void)
+{
+	int ret;
+
+	ret = devfreq_remove_governor(&devfreq_simple_ondemand);
+	if (ret)
+		pr_err("%s: failed remove governor %d\n", __func__, ret);
+
+	return;
+}
+module_exit(devfreq_simple_ondemand_exit);
+MODULE_LICENSE("GPL");
diff --git a/drivers/devfreq/governor_userspace.c b/drivers/devfreq/governor_userspace.c
index 0681246..35de6e8 100644
--- a/drivers/devfreq/governor_userspace.c
+++ b/drivers/devfreq/governor_userspace.c
@@ -14,6 +14,7 @@
 #include <linux/devfreq.h>
 #include <linux/pm.h>
 #include <linux/mutex.h>
+#include <linux/module.h>
 #include "governor.h"
 
 struct userspace_data {
@@ -116,10 +117,46 @@
 	devfreq->data = NULL;
 }
 
-const struct devfreq_governor devfreq_userspace = {
+static int devfreq_userspace_handler(struct devfreq *devfreq,
+			unsigned int event, void *data)
+{
+	int ret = 0;
+
+	switch (event) {
+	case DEVFREQ_GOV_START:
+		ret = userspace_init(devfreq);
+		break;
+	case DEVFREQ_GOV_STOP:
+		userspace_exit(devfreq);
+		break;
+	default:
+		break;
+	}
+
+	return ret;
+}
+
+static struct devfreq_governor devfreq_userspace = {
 	.name = "userspace",
 	.get_target_freq = devfreq_userspace_func,
-	.init = userspace_init,
-	.exit = userspace_exit,
-	.no_central_polling = true,
+	.event_handler = devfreq_userspace_handler,
 };
+
+static int __init devfreq_userspace_init(void)
+{
+	return devfreq_add_governor(&devfreq_userspace);
+}
+subsys_initcall(devfreq_userspace_init);
+
+static void __exit devfreq_userspace_exit(void)
+{
+	int ret;
+
+	ret = devfreq_remove_governor(&devfreq_userspace);
+	if (ret)
+		pr_err("%s: failed remove governor %d\n", __func__, ret);
+
+	return;
+}
+module_exit(devfreq_userspace_exit);
+MODULE_LICENSE("GPL");
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index 409b92b..bb82d6b 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -42,10 +42,10 @@
 config EDAC_DEBUG
 	bool "Debugging"
 	help
-	  This turns on debugging information for the entire EDAC
-	  sub-system. You can insert module with "debug_level=x", current
-	  there're four debug levels (x=0,1,2,3 from low to high).
-	  Usually you should select 'N'.
+	  This turns on debugging information for the entire EDAC subsystem.
+	  You do so by inserting edac_module with "edac_debug_level=x." Valid
+	  levels are 0-4 (from low to high) and by default it is set to 2.
+	  Usually you should select 'N' here.
 
 config EDAC_DECODE_MCE
 	tristate "Decode MCEs in human-readable form (only on AMD for now)"
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index cc8e7c7..f74a684 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -60,8 +60,8 @@
 	{ 0x00, 0UL},        /* scrubbing off */
 };
 
-static int __amd64_read_pci_cfg_dword(struct pci_dev *pdev, int offset,
-				      u32 *val, const char *func)
+int __amd64_read_pci_cfg_dword(struct pci_dev *pdev, int offset,
+			       u32 *val, const char *func)
 {
 	int err = 0;
 
@@ -423,7 +423,6 @@
 			     u64 *hole_offset, u64 *hole_size)
 {
 	struct amd64_pvt *pvt = mci->pvt_info;
-	u64 base;
 
 	/* only revE and later have the DRAM Hole Address Register */
 	if (boot_cpu_data.x86 == 0xf && pvt->ext_model < K8_REV_E) {
@@ -462,10 +461,8 @@
 	 * addresses in the hole so that they start at 0x100000000.
 	 */
 
-	base = dhar_base(pvt);
-
-	*hole_base = base;
-	*hole_size = (0x1ull << 32) - base;
+	*hole_base = dhar_base(pvt);
+	*hole_size = (1ULL << 32) - *hole_base;
 
 	if (boot_cpu_data.x86 > 0xf)
 		*hole_offset = f10_dhar_offset(pvt);
@@ -513,15 +510,15 @@
 {
 	struct amd64_pvt *pvt = mci->pvt_info;
 	u64 dram_base, hole_base, hole_offset, hole_size, dram_addr;
-	int ret = 0;
+	int ret;
 
 	dram_base = get_dram_base(pvt, pvt->mc_node_id);
 
 	ret = amd64_get_dram_hole_info(mci, &hole_base, &hole_offset,
 				      &hole_size);
 	if (!ret) {
-		if ((sys_addr >= (1ull << 32)) &&
-		    (sys_addr < ((1ull << 32) + hole_size))) {
+		if ((sys_addr >= (1ULL << 32)) &&
+		    (sys_addr < ((1ULL << 32) + hole_size))) {
 			/* use DHAR to translate SysAddr to DramAddr */
 			dram_addr = sys_addr - hole_offset;
 
@@ -712,10 +709,10 @@
 
 /* Map the Error address to a PAGE and PAGE OFFSET. */
 static inline void error_address_to_page_and_offset(u64 error_address,
-						    u32 *page, u32 *offset)
+						    struct err_info *err)
 {
-	*page = (u32) (error_address >> PAGE_SHIFT);
-	*offset = ((u32) error_address) & ~PAGE_MASK;
+	err->page = (u32) (error_address >> PAGE_SHIFT);
+	err->offset = ((u32) error_address) & ~PAGE_MASK;
 }
 
 /*
@@ -1026,59 +1023,44 @@
 }
 
 static void k8_map_sysaddr_to_csrow(struct mem_ctl_info *mci, u64 sys_addr,
-				    u16 syndrome)
+				    struct err_info *err)
 {
-	struct mem_ctl_info *src_mci;
 	struct amd64_pvt *pvt = mci->pvt_info;
-	int channel, csrow;
-	u32 page, offset;
 
-	error_address_to_page_and_offset(sys_addr, &page, &offset);
+	error_address_to_page_and_offset(sys_addr, err);
 
 	/*
 	 * Find out which node the error address belongs to. This may be
 	 * different from the node that detected the error.
 	 */
-	src_mci = find_mc_by_sys_addr(mci, sys_addr);
-	if (!src_mci) {
+	err->src_mci = find_mc_by_sys_addr(mci, sys_addr);
+	if (!err->src_mci) {
 		amd64_mc_err(mci, "failed to map error addr 0x%lx to a node\n",
 			     (unsigned long)sys_addr);
-		edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1,
-				     page, offset, syndrome,
-				     -1, -1, -1,
-				     "failed to map error addr to a node",
-				     "");
+		err->err_code = ERR_NODE;
 		return;
 	}
 
 	/* Now map the sys_addr to a CSROW */
-	csrow = sys_addr_to_csrow(src_mci, sys_addr);
-	if (csrow < 0) {
-		edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1,
-				     page, offset, syndrome,
-				     -1, -1, -1,
-				     "failed to map error addr to a csrow",
-				     "");
+	err->csrow = sys_addr_to_csrow(err->src_mci, sys_addr);
+	if (err->csrow < 0) {
+		err->err_code = ERR_CSROW;
 		return;
 	}
 
 	/* CHIPKILL enabled */
 	if (pvt->nbcfg & NBCFG_CHIPKILL) {
-		channel = get_channel_from_ecc_syndrome(mci, syndrome);
-		if (channel < 0) {
+		err->channel = get_channel_from_ecc_syndrome(mci, err->syndrome);
+		if (err->channel < 0) {
 			/*
 			 * Syndrome didn't map, so we don't know which of the
 			 * 2 DIMMs is in error. So we need to ID 'both' of them
 			 * as suspect.
 			 */
-			amd64_mc_warn(src_mci, "unknown syndrome 0x%04x - "
+			amd64_mc_warn(err->src_mci, "unknown syndrome 0x%04x - "
 				      "possible error reporting race\n",
-				      syndrome);
-			edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1,
-					     page, offset, syndrome,
-					     csrow, -1, -1,
-					     "unknown syndrome - possible error reporting race",
-					     "");
+				      err->syndrome);
+			err->err_code = ERR_CHANNEL;
 			return;
 		}
 	} else {
@@ -1090,13 +1072,8 @@
 		 * was obtained from email communication with someone at AMD.
 		 * (Wish the email was placed in this comment - norsk)
 		 */
-		channel = ((sys_addr & BIT(3)) != 0);
+		err->channel = ((sys_addr & BIT(3)) != 0);
 	}
-
-	edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, src_mci, 1,
-			     page, offset, syndrome,
-			     csrow, channel, -1,
-			     "", "");
 }
 
 static int ddr2_cs_size(unsigned i, bool dct_width)
@@ -1482,7 +1459,7 @@
 
 /* For a given @dram_range, check if @sys_addr falls within it. */
 static int f1x_match_to_this_node(struct amd64_pvt *pvt, unsigned range,
-				  u64 sys_addr, int *nid, int *chan_sel)
+				  u64 sys_addr, int *chan_sel)
 {
 	int cs_found = -EINVAL;
 	u64 chan_addr;
@@ -1555,15 +1532,14 @@
 
 	cs_found = f1x_lookup_addr_in_dct(chan_addr, node_id, channel);
 
-	if (cs_found >= 0) {
-		*nid = node_id;
+	if (cs_found >= 0)
 		*chan_sel = channel;
-	}
+
 	return cs_found;
 }
 
 static int f1x_translate_sysaddr_to_cs(struct amd64_pvt *pvt, u64 sys_addr,
-				       int *node, int *chan_sel)
+				       int *chan_sel)
 {
 	int cs_found = -EINVAL;
 	unsigned range;
@@ -1577,8 +1553,7 @@
 		    (get_dram_limit(pvt, range) >= sys_addr)) {
 
 			cs_found = f1x_match_to_this_node(pvt, range,
-							  sys_addr, node,
-							  chan_sel);
+							  sys_addr, chan_sel);
 			if (cs_found >= 0)
 				break;
 		}
@@ -1594,22 +1569,15 @@
  * (MCX_ADDR).
  */
 static void f1x_map_sysaddr_to_csrow(struct mem_ctl_info *mci, u64 sys_addr,
-				     u16 syndrome)
+				     struct err_info *err)
 {
 	struct amd64_pvt *pvt = mci->pvt_info;
-	u32 page, offset;
-	int nid, csrow, chan = 0;
 
-	error_address_to_page_and_offset(sys_addr, &page, &offset);
+	error_address_to_page_and_offset(sys_addr, err);
 
-	csrow = f1x_translate_sysaddr_to_cs(pvt, sys_addr, &nid, &chan);
-
-	if (csrow < 0) {
-		edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1,
-				     page, offset, syndrome,
-				     -1, -1, -1,
-				     "failed to map error addr to a csrow",
-				     "");
+	err->csrow = f1x_translate_sysaddr_to_cs(pvt, sys_addr, &err->channel);
+	if (err->csrow < 0) {
+		err->err_code = ERR_CSROW;
 		return;
 	}
 
@@ -1619,12 +1587,7 @@
 	 * this point.
 	 */
 	if (dct_ganging_enabled(pvt))
-		chan = get_channel_from_ecc_syndrome(mci, syndrome);
-
-	edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1,
-			     page, offset, syndrome,
-			     csrow, chan, -1,
-			     "", "");
+		err->channel = get_channel_from_ecc_syndrome(mci, err->syndrome);
 }
 
 /*
@@ -1633,14 +1596,11 @@
  */
 static void amd64_debug_display_dimm_sizes(struct amd64_pvt *pvt, u8 ctrl)
 {
-	int dimm, size0, size1, factor = 0;
+	int dimm, size0, size1;
 	u32 *dcsb = ctrl ? pvt->csels[1].csbases : pvt->csels[0].csbases;
 	u32 dbam  = ctrl ? pvt->dbam1 : pvt->dbam0;
 
 	if (boot_cpu_data.x86 == 0xf) {
-		if (pvt->dclr0 & WIDTH_128)
-			factor = 1;
-
 		/* K8 families < revF not supported yet */
 	       if (pvt->ext_model < K8_REV_F)
 			return;
@@ -1671,8 +1631,8 @@
 						     DBAM_DIMM(dimm, dbam));
 
 		amd64_info(EDAC_MC ": %d: %5dMB %d: %5dMB\n",
-				dimm * 2,     size0 << factor,
-				dimm * 2 + 1, size1 << factor);
+				dimm * 2,     size0,
+				dimm * 2 + 1, size1);
 	}
 }
 
@@ -1893,101 +1853,56 @@
 	return map_err_sym_to_channel(err_sym, pvt->ecc_sym_sz);
 }
 
-/*
- * Handle any Correctable Errors (CEs) that have occurred. Check for valid ERROR
- * ADDRESS and process.
- */
-static void amd64_handle_ce(struct mem_ctl_info *mci, struct mce *m)
+static void __log_bus_error(struct mem_ctl_info *mci, struct err_info *err,
+			    u8 ecc_type)
 {
-	struct amd64_pvt *pvt = mci->pvt_info;
-	u64 sys_addr;
-	u16 syndrome;
+	enum hw_event_mc_err_type err_type;
+	const char *string;
 
-	/* Ensure that the Error Address is VALID */
-	if (!(m->status & MCI_STATUS_ADDRV)) {
-		amd64_mc_err(mci, "HW has no ERROR_ADDRESS available\n");
-		edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1,
-				     0, 0, 0,
-				     -1, -1, -1,
-				     "HW has no ERROR_ADDRESS available",
-				     "");
+	if (ecc_type == 2)
+		err_type = HW_EVENT_ERR_CORRECTED;
+	else if (ecc_type == 1)
+		err_type = HW_EVENT_ERR_UNCORRECTED;
+	else {
+		WARN(1, "Something is rotten in the state of Denmark.\n");
 		return;
 	}
 
-	sys_addr = get_error_address(m);
-	syndrome = extract_syndrome(m->status);
-
-	amd64_mc_err(mci, "CE ERROR_ADDRESS= 0x%llx\n", sys_addr);
-
-	pvt->ops->map_sysaddr_to_csrow(mci, sys_addr, syndrome);
-}
-
-/* Handle any Un-correctable Errors (UEs) */
-static void amd64_handle_ue(struct mem_ctl_info *mci, struct mce *m)
-{
-	struct mem_ctl_info *log_mci, *src_mci = NULL;
-	int csrow;
-	u64 sys_addr;
-	u32 page, offset;
-
-	log_mci = mci;
-
-	if (!(m->status & MCI_STATUS_ADDRV)) {
-		amd64_mc_err(mci, "HW has no ERROR_ADDRESS available\n");
-		edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1,
-				     0, 0, 0,
-				     -1, -1, -1,
-				     "HW has no ERROR_ADDRESS available",
-				     "");
-		return;
+	switch (err->err_code) {
+	case DECODE_OK:
+		string = "";
+		break;
+	case ERR_NODE:
+		string = "Failed to map error addr to a node";
+		break;
+	case ERR_CSROW:
+		string = "Failed to map error addr to a csrow";
+		break;
+	case ERR_CHANNEL:
+		string = "unknown syndrome - possible error reporting race";
+		break;
+	default:
+		string = "WTF error";
+		break;
 	}
 
-	sys_addr = get_error_address(m);
-	error_address_to_page_and_offset(sys_addr, &page, &offset);
-
-	/*
-	 * Find out which node the error address belongs to. This may be
-	 * different from the node that detected the error.
-	 */
-	src_mci = find_mc_by_sys_addr(mci, sys_addr);
-	if (!src_mci) {
-		amd64_mc_err(mci, "ERROR ADDRESS (0x%lx) NOT mapped to a MC\n",
-				  (unsigned long)sys_addr);
-		edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1,
-				     page, offset, 0,
-				     -1, -1, -1,
-				     "ERROR ADDRESS NOT mapped to a MC",
-				     "");
-		return;
-	}
-
-	log_mci = src_mci;
-
-	csrow = sys_addr_to_csrow(log_mci, sys_addr);
-	if (csrow < 0) {
-		amd64_mc_err(mci, "ERROR_ADDRESS (0x%lx) NOT mapped to CS\n",
-				  (unsigned long)sys_addr);
-		edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1,
-				     page, offset, 0,
-				     -1, -1, -1,
-				     "ERROR ADDRESS NOT mapped to CS",
-				     "");
-	} else {
-		edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1,
-				     page, offset, 0,
-				     csrow, -1, -1,
-				     "", "");
-	}
+	edac_mc_handle_error(err_type, mci, 1,
+			     err->page, err->offset, err->syndrome,
+			     err->csrow, err->channel, -1,
+			     string, "");
 }
 
 static inline void __amd64_decode_bus_error(struct mem_ctl_info *mci,
 					    struct mce *m)
 {
-	u16 ec = EC(m->status);
-	u8 xec = XEC(m->status, 0x1f);
+	struct amd64_pvt *pvt = mci->pvt_info;
 	u8 ecc_type = (m->status >> 45) & 0x3;
+	u8 xec = XEC(m->status, 0x1f);
+	u16 ec = EC(m->status);
+	u64 sys_addr;
+	struct err_info err;
 
-	/* Bail early out if this was an 'observed' error */
+	/* Bail out early if this was an 'observed' error */
 	if (PP(ec) == NBSL_PP_OBS)
 		return;
 
@@ -1995,10 +1910,16 @@
 	if (xec && xec != F10_NBSL_EXT_ERR_ECC)
 		return;
 
+	memset(&err, 0, sizeof(err));
+
+	sys_addr = get_error_address(m);
+
 	if (ecc_type == 2)
-		amd64_handle_ce(mci, m);
-	else if (ecc_type == 1)
-		amd64_handle_ue(mci, m);
+		err.syndrome = extract_syndrome(m->status);
+
+	pvt->ops->map_sysaddr_to_csrow(mci, sys_addr, &err);
+
+	__log_bus_error(mci, &err, ecc_type);
 }
 
 void amd64_decode_bus_error(int node_id, struct mce *m)
@@ -2166,6 +2087,7 @@
 	u32 cs_mode, nr_pages;
 	u32 dbam = dct ? pvt->dbam1 : pvt->dbam0;
 
+
 	/*
 	 * The math on this doesn't look right on the surface because x/2*4 can
 	 * be simplified to x*2 but this expression makes use of the fact that
@@ -2173,13 +2095,13 @@
 	 * number of bits to shift the DBAM register to extract the proper CSROW
 	 * field.
 	 */
-	cs_mode =  (dbam >> ((csrow_nr / 2) * 4)) & 0xF;
+	cs_mode = DBAM_DIMM(csrow_nr / 2, dbam);
 
 	nr_pages = pvt->ops->dbam_to_cs(pvt, dct, cs_mode) << (20 - PAGE_SHIFT);
 
-	edac_dbg(0, "  (csrow=%d) DBAM map index= %d\n", csrow_nr, cs_mode);
-	edac_dbg(0, "    nr_pages/channel= %u  channel-count = %d\n",
-		 nr_pages, pvt->channel_count);
+	edac_dbg(0, "csrow: %d, channel: %d, DBAM idx: %d\n",
+		    csrow_nr, dct,  cs_mode);
+	edac_dbg(0, "nr_pages/channel: %u\n", nr_pages);
 
 	return nr_pages;
 }
@@ -2190,15 +2112,14 @@
  */
 static int init_csrows(struct mem_ctl_info *mci)
 {
+	struct amd64_pvt *pvt = mci->pvt_info;
 	struct csrow_info *csrow;
 	struct dimm_info *dimm;
-	struct amd64_pvt *pvt = mci->pvt_info;
-	u64 base, mask;
-	u32 val;
-	int i, j, empty = 1;
-	enum mem_type mtype;
 	enum edac_type edac_mode;
+	enum mem_type mtype;
+	int i, j, empty = 1;
 	int nr_pages = 0;
+	u32 val;
 
 	amd64_read_pci_cfg(pvt->F3, NBCFG, &val);
 
@@ -2208,29 +2129,35 @@
 		 pvt->mc_node_id, val,
 		 !!(val & NBCFG_CHIPKILL), !!(val & NBCFG_ECC_ENABLE));
 
+	/*
+	 * We iterate over DCT0 here but we look at DCT1 in parallel, if needed.
+	 */
 	for_each_chip_select(i, 0, pvt) {
-		csrow = mci->csrows[i];
+		bool row_dct0 = !!csrow_enabled(i, 0, pvt);
+		bool row_dct1 = false;
 
-		if (!csrow_enabled(i, 0, pvt) && !csrow_enabled(i, 1, pvt)) {
-			edac_dbg(1, "----CSROW %d VALID for MC node %d\n",
-				 i, pvt->mc_node_id);
+		if (boot_cpu_data.x86 != 0xf)
+			row_dct1 = !!csrow_enabled(i, 1, pvt);
+
+		if (!row_dct0 && !row_dct1)
 			continue;
-		}
 
+		csrow = mci->csrows[i];
 		empty = 0;
-		if (csrow_enabled(i, 0, pvt))
-			nr_pages = amd64_csrow_nr_pages(pvt, 0, i);
-		if (csrow_enabled(i, 1, pvt))
-			nr_pages += amd64_csrow_nr_pages(pvt, 1, i);
 
-		get_cs_base_and_mask(pvt, i, 0, &base, &mask);
-		/* 8 bytes of resolution */
+		edac_dbg(1, "MC node: %d, csrow: %d\n",
+			    pvt->mc_node_id, i);
+
+		if (row_dct0)
+			nr_pages = amd64_csrow_nr_pages(pvt, 0, i);
+
+		/* K8 has only one DCT */
+		if (boot_cpu_data.x86 != 0xf && row_dct1)
+			nr_pages += amd64_csrow_nr_pages(pvt, 1, i);
 
 		mtype = amd64_determine_memory_type(pvt, i);
 
-		edac_dbg(1, "  for MC node %d csrow %d:\n", pvt->mc_node_id, i);
-		edac_dbg(1, "    nr_pages: %u\n",
-			 nr_pages * pvt->channel_count);
+		edac_dbg(1, "Total csrow%d pages: %u\n", i, nr_pages);
 
 		/*
 		 * determine whether CHIPKILL or JUST ECC or NO ECC is operating
@@ -2247,6 +2174,7 @@
 			dimm->edac_mode = edac_mode;
 			dimm->nr_pages = nr_pages;
 		}
+		csrow->nr_pages = nr_pages;
 	}
 
 	return empty;
@@ -2591,6 +2519,7 @@
 
 	mci->pvt_info = pvt;
 	mci->pdev = &pvt->F2->dev;
+	mci->csbased = 1;
 
 	setup_mci_misc_attrs(mci, fam_type);
 
diff --git a/drivers/edac/amd64_edac.h b/drivers/edac/amd64_edac.h
index 8d48047..e864f40 100644
--- a/drivers/edac/amd64_edac.h
+++ b/drivers/edac/amd64_edac.h
@@ -33,7 +33,7 @@
  *		detection. The mods to Rev F required more family
  *		information detection.
  *
- *	Changes/Fixes by Borislav Petkov <borislav.petkov@amd.com>:
+ *	Changes/Fixes by Borislav Petkov <bp@alien8.de>:
  *		- misc fixes and code cleanups
  *
  * This module is based on the following documents
@@ -219,7 +219,7 @@
 #define DBAM1				0x180
 
 /* Extract the DIMM 'type' on the i'th DIMM from the DBAM reg value passed */
-#define DBAM_DIMM(i, reg)		((((reg) >> (4*i))) & 0xF)
+#define DBAM_DIMM(i, reg)		((((reg) >> (4*(i)))) & 0xF)
 
 #define DBAM_MAX_VALUE			11
 
@@ -267,18 +267,20 @@
 #define online_spare_bad_dramcs(pvt, c)	(((pvt)->online_spare >> (4 + 4 * (c))) & 0x7)
 
 #define F10_NB_ARRAY_ADDR		0xB8
-#define F10_NB_ARRAY_DRAM_ECC		BIT(31)
+#define F10_NB_ARRAY_DRAM		BIT(31)
 
 /* Bits [2:1] are used to select 16-byte section within a 64-byte cacheline  */
-#define SET_NB_ARRAY_ADDRESS(section)	(((section) & 0x3) << 1)
+#define SET_NB_ARRAY_ADDR(section)	(((section) & 0x3) << 1)
 
 #define F10_NB_ARRAY_DATA		0xBC
-#define SET_NB_DRAM_INJECTION_WRITE(word, bits)  \
-					(BIT(((word) & 0xF) + 20) | \
-					BIT(17) | bits)
-#define SET_NB_DRAM_INJECTION_READ(word, bits)  \
-					(BIT(((word) & 0xF) + 20) | \
-					BIT(16) |  bits)
+#define F10_NB_ARR_ECC_WR_REQ		BIT(17)
+#define SET_NB_DRAM_INJECTION_WRITE(inj)  \
+					(BIT(((inj.word) & 0xF) + 20) | \
+					F10_NB_ARR_ECC_WR_REQ | inj.bit_map)
+#define SET_NB_DRAM_INJECTION_READ(inj)  \
+					(BIT(((inj.word) & 0xF) + 20) | \
+					BIT(16) |  inj.bit_map)
+
 
 #define NBCAP				0xE8
 #define NBCAP_CHIPKILL			BIT(4)
@@ -305,9 +307,9 @@
 
 /* Error injection control structure */
 struct error_injection {
-	u32	section;
-	u32	word;
-	u32	bit_map;
+	u32	 section;
+	u32	 word;
+	u32	 bit_map;
 };
 
 /* low and high part of PCI config space regs */
@@ -374,6 +376,23 @@
 	struct error_injection injection;
 };
 
+enum err_codes {
+	DECODE_OK	=  0,
+	ERR_NODE	= -1,
+	ERR_CSROW	= -2,
+	ERR_CHANNEL	= -3,
+};
+
+struct err_info {
+	int err_code;
+	struct mem_ctl_info *src_mci;
+	int csrow;
+	int channel;
+	u16 syndrome;
+	u32 page;
+	u32 offset;
+};
+
 static inline u64 get_dram_base(struct amd64_pvt *pvt, unsigned i)
 {
 	u64 addr = ((u64)pvt->ranges[i].base.lo & 0xffff0000) << 8;
@@ -447,7 +466,7 @@
 struct low_ops {
 	int (*early_channel_count)	(struct amd64_pvt *pvt);
 	void (*map_sysaddr_to_csrow)	(struct mem_ctl_info *mci, u64 sys_addr,
-					 u16 syndrome);
+					 struct err_info *);
 	int (*dbam_to_cs)		(struct amd64_pvt *pvt, u8 dct, unsigned cs_mode);
 	int (*read_dct_pci_cfg)		(struct amd64_pvt *pvt, int offset,
 					 u32 *val, const char *func);
@@ -459,6 +478,8 @@
 	struct low_ops ops;
 };
 
+int __amd64_read_pci_cfg_dword(struct pci_dev *pdev, int offset,
+			       u32 *val, const char *func);
 int __amd64_write_pci_cfg_dword(struct pci_dev *pdev, int offset,
 				u32 val, const char *func);
 
@@ -475,3 +496,15 @@
 			     u64 *hole_offset, u64 *hole_size);
 
 #define to_mci(k) container_of(k, struct mem_ctl_info, dev)
+
+/* Injection helpers */
+static inline void disable_caches(void *dummy)
+{
+	write_cr0(read_cr0() | X86_CR0_CD);
+	wbinvd();
+}
+
+static inline void enable_caches(void *dummy)
+{
+	write_cr0(read_cr0() & ~X86_CR0_CD);
+}
diff --git a/drivers/edac/amd64_edac_inj.c b/drivers/edac/amd64_edac_inj.c
index 53d972e..8c171fa 100644
--- a/drivers/edac/amd64_edac_inj.c
+++ b/drivers/edac/amd64_edac_inj.c
@@ -22,20 +22,19 @@
 	struct mem_ctl_info *mci = to_mci(dev);
 	struct amd64_pvt *pvt = mci->pvt_info;
 	unsigned long value;
-	int ret = 0;
+	int ret;
 
 	ret = strict_strtoul(data, 10, &value);
-	if (ret != -EINVAL) {
+	if (ret < 0)
+		return ret;
 
-		if (value > 3) {
-			amd64_warn("%s: invalid section 0x%lx\n", __func__, value);
-			return -EINVAL;
-		}
-
-		pvt->injection.section = (u32) value;
-		return count;
+	if (value > 3) {
+		amd64_warn("%s: invalid section 0x%lx\n", __func__, value);
+		return -EINVAL;
 	}
-	return ret;
+
+	pvt->injection.section = (u32) value;
+	return count;
 }
 
 static ssize_t amd64_inject_word_show(struct device *dev,
@@ -60,20 +59,19 @@
 	struct mem_ctl_info *mci = to_mci(dev);
 	struct amd64_pvt *pvt = mci->pvt_info;
 	unsigned long value;
-	int ret = 0;
+	int ret;
 
 	ret = strict_strtoul(data, 10, &value);
-	if (ret != -EINVAL) {
+	if (ret < 0)
+		return ret;
 
-		if (value > 8) {
-			amd64_warn("%s: invalid word 0x%lx\n", __func__, value);
-			return -EINVAL;
-		}
-
-		pvt->injection.word = (u32) value;
-		return count;
+	if (value > 8) {
+		amd64_warn("%s: invalid word 0x%lx\n", __func__, value);
+		return -EINVAL;
 	}
-	return ret;
+
+	pvt->injection.word = (u32) value;
+	return count;
 }
 
 static ssize_t amd64_inject_ecc_vector_show(struct device *dev,
@@ -97,21 +95,19 @@
 	struct mem_ctl_info *mci = to_mci(dev);
 	struct amd64_pvt *pvt = mci->pvt_info;
 	unsigned long value;
-	int ret = 0;
+	int ret;
 
 	ret = strict_strtoul(data, 16, &value);
-	if (ret != -EINVAL) {
+	if (ret < 0)
+		return ret;
 
-		if (value & 0xFFFF0000) {
-			amd64_warn("%s: invalid EccVector: 0x%lx\n",
-				   __func__, value);
-			return -EINVAL;
-		}
-
-		pvt->injection.bit_map = (u32) value;
-		return count;
+	if (value & 0xFFFF0000) {
+		amd64_warn("%s: invalid EccVector: 0x%lx\n", __func__, value);
+		return -EINVAL;
 	}
-	return ret;
+
+	pvt->injection.bit_map = (u32) value;
+	return count;
 }
 
 /*
@@ -126,28 +122,25 @@
 	struct amd64_pvt *pvt = mci->pvt_info;
 	unsigned long value;
 	u32 section, word_bits;
-	int ret = 0;
+	int ret;
 
 	ret = strict_strtoul(data, 10, &value);
-	if (ret != -EINVAL) {
+	if (ret < 0)
+		return ret;
 
-		/* Form value to choose 16-byte section of cacheline */
-		section = F10_NB_ARRAY_DRAM_ECC |
-				SET_NB_ARRAY_ADDRESS(pvt->injection.section);
-		amd64_write_pci_cfg(pvt->F3, F10_NB_ARRAY_ADDR, section);
+	/* Form value to choose 16-byte section of cacheline */
+	section = F10_NB_ARRAY_DRAM | SET_NB_ARRAY_ADDR(pvt->injection.section);
 
-		word_bits = SET_NB_DRAM_INJECTION_READ(pvt->injection.word,
-						pvt->injection.bit_map);
+	amd64_write_pci_cfg(pvt->F3, F10_NB_ARRAY_ADDR, section);
 
-		/* Issue 'word' and 'bit' along with the READ request */
-		amd64_write_pci_cfg(pvt->F3, F10_NB_ARRAY_DATA, word_bits);
+	word_bits = SET_NB_DRAM_INJECTION_READ(pvt->injection);
 
-		edac_dbg(0, "section=0x%x word_bits=0x%x\n",
-			 section, word_bits);
+	/* Issue 'word' and 'bit' along with the READ request */
+	amd64_write_pci_cfg(pvt->F3, F10_NB_ARRAY_DATA, word_bits);
 
-		return count;
-	}
-	return ret;
+	edac_dbg(0, "section=0x%x word_bits=0x%x\n", section, word_bits);
+
+	return count;
 }
 
 /*
@@ -160,30 +153,43 @@
 {
 	struct mem_ctl_info *mci = to_mci(dev);
 	struct amd64_pvt *pvt = mci->pvt_info;
+	u32 section, word_bits, tmp;
 	unsigned long value;
-	u32 section, word_bits;
-	int ret = 0;
+	int ret;
 
 	ret = strict_strtoul(data, 10, &value);
-	if (ret != -EINVAL) {
+	if (ret < 0)
+		return ret;
 
-		/* Form value to choose 16-byte section of cacheline */
-		section = F10_NB_ARRAY_DRAM_ECC |
-				SET_NB_ARRAY_ADDRESS(pvt->injection.section);
-		amd64_write_pci_cfg(pvt->F3, F10_NB_ARRAY_ADDR, section);
+	/* Form value to choose 16-byte section of cacheline */
+	section = F10_NB_ARRAY_DRAM | SET_NB_ARRAY_ADDR(pvt->injection.section);
 
-		word_bits = SET_NB_DRAM_INJECTION_WRITE(pvt->injection.word,
-						pvt->injection.bit_map);
+	amd64_write_pci_cfg(pvt->F3, F10_NB_ARRAY_ADDR, section);
 
-		/* Issue 'word' and 'bit' along with the READ request */
-		amd64_write_pci_cfg(pvt->F3, F10_NB_ARRAY_DATA, word_bits);
+	word_bits = SET_NB_DRAM_INJECTION_WRITE(pvt->injection);
 
-		edac_dbg(0, "section=0x%x word_bits=0x%x\n",
-			 section, word_bits);
+	pr_notice_once("Don't forget to decrease MCE polling interval in\n"
+			"/sys/bus/machinecheck/devices/machinecheck<CPUNUM>/check_interval\n"
+			"so that you can get the error report faster.\n");
 
-		return count;
+	on_each_cpu(disable_caches, NULL, 1);
+
+	/* Issue 'word' and 'bit' along with the READ request */
+	amd64_write_pci_cfg(pvt->F3, F10_NB_ARRAY_DATA, word_bits);
+
+ retry:
+	/* wait until injection happens */
+	amd64_read_pci_cfg(pvt->F3, F10_NB_ARRAY_DATA, &tmp);
+	if (tmp & F10_NB_ARR_ECC_WR_REQ) {
+		cpu_relax();
+		goto retry;
 	}
-	return ret;
+
+	on_each_cpu(enable_caches, NULL, 1);
+
+	edac_dbg(0, "section=0x%x word_bits=0x%x\n", section, word_bits);
+
+	return count;
 }
 
 /*
diff --git a/drivers/edac/edac_mc.c b/drivers/edac/edac_mc.c
index 90f0b73..281f566 100644
--- a/drivers/edac/edac_mc.c
+++ b/drivers/edac/edac_mc.c
@@ -416,10 +416,18 @@
 		dimm->cschannel = chn;
 
 		/* Increment csrow location */
-		row++;
-		if (row == tot_csrows) {
-			row = 0;
+		if (layers[0].is_virt_csrow) {
 			chn++;
+			if (chn == tot_channels) {
+				chn = 0;
+				row++;
+			}
+		} else {
+			row++;
+			if (row == tot_csrows) {
+				row = 0;
+				chn++;
+			}
 		}
 
 		/* Increment dimm location */
@@ -966,20 +974,22 @@
 			  long grain)
 {
 	unsigned long remapped_page;
+	char *msg_aux = "";
+
+	if (*msg)
+		msg_aux = " ";
 
 	if (edac_mc_get_log_ce()) {
 		if (other_detail && *other_detail)
 			edac_mc_printk(mci, KERN_WARNING,
-				       "%d CE %s on %s (%s %s - %s)\n",
-				       error_count,
-				       msg, label, location,
-				       detail, other_detail);
+				       "%d CE %s%son %s (%s %s - %s)\n",
+				       error_count, msg, msg_aux, label,
+				       location, detail, other_detail);
 		else
 			edac_mc_printk(mci, KERN_WARNING,
-				       "%d CE %s on %s (%s %s)\n",
-				       error_count,
-				       msg, label, location,
-				       detail);
+				       "%d CE %s%son %s (%s %s)\n",
+				       error_count, msg, msg_aux, label,
+				       location, detail);
 	}
 	edac_inc_ce_error(mci, enable_per_layer_report, pos, error_count);
 
@@ -1014,27 +1024,31 @@
 			  const char *other_detail,
 			  const bool enable_per_layer_report)
 {
+	char *msg_aux = "";
+
+	if (*msg)
+		msg_aux = " ";
+
 	if (edac_mc_get_log_ue()) {
 		if (other_detail && *other_detail)
 			edac_mc_printk(mci, KERN_WARNING,
-				       "%d UE %s on %s (%s %s - %s)\n",
-				       error_count,
-			               msg, label, location, detail,
-				       other_detail);
+				       "%d UE %s%son %s (%s %s - %s)\n",
+				       error_count, msg, msg_aux, label,
+				       location, detail, other_detail);
 		else
 			edac_mc_printk(mci, KERN_WARNING,
-				       "%d UE %s on %s (%s %s)\n",
-				       error_count,
-			               msg, label, location, detail);
+				       "%d UE %s%son %s (%s %s)\n",
+				       error_count, msg, msg_aux, label,
+				       location, detail);
 	}
 
 	if (edac_mc_get_panic_on_ue()) {
 		if (other_detail && *other_detail)
-			panic("UE %s on %s (%s%s - %s)\n",
-			      msg, label, location, detail, other_detail);
+			panic("UE %s%son %s (%s%s - %s)\n",
+			      msg, msg_aux, label, location, detail, other_detail);
 		else
-			panic("UE %s on %s (%s%s)\n",
-			      msg, label, location, detail);
+			panic("UE %s%son %s (%s%s)\n",
+			      msg, msg_aux, label, location, detail);
 	}
 
 	edac_inc_ue_error(mci, enable_per_layer_report, pos, error_count);
@@ -1093,10 +1107,6 @@
 	 */
 	for (i = 0; i < mci->n_layers; i++) {
 		if (pos[i] >= (int)mci->layers[i].size) {
-			if (type == HW_EVENT_ERR_CORRECTED)
-				p = "CE";
-			else
-				p = "UE";
 
 			edac_mc_printk(mci, KERN_ERR,
 				       "INTERNAL ERROR: %s value is out of range (%d >= %d)\n",
@@ -1128,6 +1138,7 @@
 	grain = 0;
 	p = label;
 	*p = '\0';
+
 	for (i = 0; i < mci->tot_dimms; i++) {
 		struct dimm_info *dimm = mci->dimms[i];
 
@@ -1195,6 +1206,7 @@
 
 	/* Fill the RAM location data */
 	p = location;
+
 	for (i = 0; i < mci->n_layers; i++) {
 		if (pos[i] < 0)
 			continue;
@@ -1207,7 +1219,6 @@
 		*(p - 1) = '\0';
 
 	/* Report the error via the trace interface */
-
 	grain_bits = fls_long(grain) + 1;
 	trace_mc_event(type, msg, label, error_count,
 		       mci->mc_idx, top_layer, mid_layer, low_layer,
diff --git a/drivers/edac/edac_mc_sysfs.c b/drivers/edac/edac_mc_sysfs.c
index ed0bc07..de2df92 100644
--- a/drivers/edac/edac_mc_sysfs.c
+++ b/drivers/edac/edac_mc_sysfs.c
@@ -180,6 +180,9 @@
 	int i;
 	u32 nr_pages = 0;
 
+	if (csrow->mci->csbased)
+		return sprintf(data, "%u\n", PAGES_TO_MiB(csrow->nr_pages));
+
 	for (i = 0; i < csrow->nr_channels; i++)
 		nr_pages += csrow->channels[i]->dimm->nr_pages;
 	return sprintf(data, "%u\n", PAGES_TO_MiB(nr_pages));
@@ -373,6 +376,7 @@
 	csrow->dev.bus = &mci->bus;
 	device_initialize(&csrow->dev);
 	csrow->dev.parent = &mci->dev;
+	csrow->mci = mci;
 	dev_set_name(&csrow->dev, "csrow%d", index);
 	dev_set_drvdata(&csrow->dev, csrow);
 
@@ -777,10 +781,14 @@
 	for (csrow_idx = 0; csrow_idx < mci->nr_csrows; csrow_idx++) {
 		struct csrow_info *csrow = mci->csrows[csrow_idx];
 
-		for (j = 0; j < csrow->nr_channels; j++) {
-			struct dimm_info *dimm = csrow->channels[j]->dimm;
+		if (csrow->mci->csbased) {
+			total_pages += csrow->nr_pages;
+		} else {
+			for (j = 0; j < csrow->nr_channels; j++) {
+				struct dimm_info *dimm = csrow->channels[j]->dimm;
 
-			total_pages += dimm->nr_pages;
+				total_pages += dimm->nr_pages;
+			}
 		}
 	}
 
@@ -838,14 +846,8 @@
 	return count;
 }
 
-static int debugfs_open(struct inode *inode, struct file *file)
-{
-	file->private_data = inode->i_private;
-	return 0;
-}
-
 static const struct file_operations debug_fake_inject_fops = {
-	.open = debugfs_open,
+	.open = simple_open,
 	.write = edac_fake_inject_write,
 	.llseek = generic_file_llseek,
 };
@@ -1124,10 +1126,15 @@
 	edac_subsys = edac_get_sysfs_subsys();
 	if (edac_subsys == NULL) {
 		edac_dbg(1, "no edac_subsys\n");
-		return -EINVAL;
+		err = -EINVAL;
+		goto out;
 	}
 
 	mci_pdev = kzalloc(sizeof(*mci_pdev), GFP_KERNEL);
+	if (!mci_pdev) {
+		err = -ENOMEM;
+		goto out_put_sysfs;
+	}
 
 	mci_pdev->bus = edac_subsys;
 	mci_pdev->type = &mc_attr_type;
@@ -1136,11 +1143,18 @@
 
 	err = device_add(mci_pdev);
 	if (err < 0)
-		return err;
+		goto out_dev_free;
 
 	edac_dbg(0, "device %s created\n", dev_name(mci_pdev));
 
 	return 0;
+
+ out_dev_free:
+	kfree(mci_pdev);
+ out_put_sysfs:
+	edac_put_sysfs_subsys();
+ out:
+	return err;
 }
 
 void __exit edac_mc_sysfs_exit(void)
@@ -1148,4 +1162,5 @@
 	put_device(mci_pdev);
 	device_del(mci_pdev);
 	edac_put_sysfs_subsys();
+	kfree(mci_pdev);
 }
diff --git a/drivers/edac/edac_module.c b/drivers/edac/edac_module.c
index 58a28d8..12c951a 100644
--- a/drivers/edac/edac_module.c
+++ b/drivers/edac/edac_module.c
@@ -18,9 +18,29 @@
 #define EDAC_VERSION "Ver: 3.0.0"
 
 #ifdef CONFIG_EDAC_DEBUG
+
+static int edac_set_debug_level(const char *buf, struct kernel_param *kp)
+{
+	unsigned long val;
+	int ret;
+
+	ret = kstrtoul(buf, 0, &val);
+	if (ret)
+		return ret;
+
+	if (val < 0 || val > 4)
+		return -EINVAL;
+
+	return param_set_int(buf, kp);
+}
+
 /* Values of 0 to 4 will generate output */
 int edac_debug_level = 2;
 EXPORT_SYMBOL_GPL(edac_debug_level);
+
+module_param_call(edac_debug_level, edac_set_debug_level, param_get_int,
+		  &edac_debug_level, 0644);
+MODULE_PARM_DESC(edac_debug_level, "EDAC debug level: [0-4], default: 2");
 #endif
 
 /* scope is to module level only */
@@ -132,10 +152,3 @@
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Doug Thompson www.softwarebitmaker.com, et al");
 MODULE_DESCRIPTION("Core library routines for EDAC reporting");
-
-/* refer to *_sysfs.c files for parameters that are exported via sysfs */
-
-#ifdef CONFIG_EDAC_DEBUG
-module_param(edac_debug_level, int, 0644);
-MODULE_PARM_DESC(edac_debug_level, "Debug level");
-#endif
diff --git a/drivers/edac/edac_pci.c b/drivers/edac/edac_pci.c
index ee87ef9..dd370f9 100644
--- a/drivers/edac/edac_pci.c
+++ b/drivers/edac/edac_pci.c
@@ -470,7 +470,8 @@
 
 	pci->mod_name = mod_name;
 	pci->ctl_name = EDAC_PCI_GENCTL_NAME;
-	pci->edac_check = edac_pci_generic_check;
+	if (edac_op_state == EDAC_OPSTATE_POLL)
+		pci->edac_check = edac_pci_generic_check;
 
 	pdata->edac_idx = edac_pci_idx++;
 
diff --git a/drivers/edac/edac_pci_sysfs.c b/drivers/edac/edac_pci_sysfs.c
index e164c55..dc6e905 100644
--- a/drivers/edac/edac_pci_sysfs.c
+++ b/drivers/edac/edac_pci_sysfs.c
@@ -645,20 +645,16 @@
 
 /*
  * pci_dev parity list iterator
- *	Scan the PCI device list for one pass, looking for SERRORs
- *	Master Parity ERRORS or Parity ERRORs on primary or secondary devices
+ *
+ *	Scan the PCI device list looking for SERRORs, Master Parity ERRORS or
+ *	Parity ERRORs on primary or secondary devices.
  */
 static inline void edac_pci_dev_parity_iterator(pci_parity_check_fn_t fn)
 {
 	struct pci_dev *dev = NULL;
 
-	/* request for kernel access to the next PCI device, if any,
-	 * and while we are looking at it have its reference count
-	 * bumped until we are done with it
-	 */
-	while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
+	for_each_pci_dev(dev)
 		fn(dev);
-	}
 }
 
 /*
diff --git a/drivers/edac/edac_stub.c b/drivers/edac/edac_stub.c
index 6c86f6e..351945f 100644
--- a/drivers/edac/edac_stub.c
+++ b/drivers/edac/edac_stub.c
@@ -5,7 +5,7 @@
  *
  * 2007 (c) MontaVista Software, Inc.
  * 2010 (c) Advanced Micro Devices Inc.
- *	    Borislav Petkov <borislav.petkov@amd.com>
+ *	    Borislav Petkov <bp@alien8.de>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/drivers/edac/highbank_mc_edac.c b/drivers/edac/highbank_mc_edac.c
index c769f47..7ea4cc2 100644
--- a/drivers/edac/highbank_mc_edac.c
+++ b/drivers/edac/highbank_mc_edac.c
@@ -113,14 +113,8 @@
 	return count;
 }
 
-static int debugfs_open(struct inode *inode, struct file *file)
-{
-	file->private_data = inode->i_private;
-	return 0;
-}
-
 static const struct file_operations highbank_mc_debug_inject_fops = {
-	.open = debugfs_open,
+	.open = simple_open,
 	.write = highbank_mc_err_inject_write,
 	.llseek = generic_file_llseek,
 };
diff --git a/drivers/edac/i7300_edac.c b/drivers/edac/i7300_edac.c
index a09d066..9d669cd4 100644
--- a/drivers/edac/i7300_edac.c
+++ b/drivers/edac/i7300_edac.c
@@ -197,8 +197,8 @@
 	[0]  = "Memory Write error on non-redundant retry or "
 	       "FBD configuration Write error on retry",
 };
-#define GET_FBD_FAT_IDX(fbderr)	(fbderr & (3 << 28))
-#define FERR_FAT_FBD_ERR_MASK ((1 << 0) | (1 << 1) | (1 << 2) | (1 << 3))
+#define GET_FBD_FAT_IDX(fbderr)	(((fbderr) >> 28) & 3)
+#define FERR_FAT_FBD_ERR_MASK ((1 << 0) | (1 << 1) | (1 << 2) | (1 << 22))
 
 #define FERR_NF_FBD	0xa0
 static const char *ferr_nf_fbd_name[] = {
@@ -225,7 +225,7 @@
 	[1]  = "Aliased Uncorrectable Non-Mirrored Demand Data ECC",
 	[0]  = "Uncorrectable Data ECC on Replay",
 };
-#define GET_FBD_NF_IDX(fbderr)	(fbderr & (3 << 28))
+#define GET_FBD_NF_IDX(fbderr)	(((fbderr) >> 28) & 3)
 #define FERR_NF_FBD_ERR_MASK ((1 << 24) | (1 << 23) | (1 << 22) | (1 << 21) |\
 			      (1 << 18) | (1 << 17) | (1 << 16) | (1 << 15) |\
 			      (1 << 14) | (1 << 13) | (1 << 11) | (1 << 10) |\
@@ -464,7 +464,7 @@
 		errnum = find_first_bit(&errors,
 					ARRAY_SIZE(ferr_nf_fbd_name));
 		specific = GET_ERR_FROM_TABLE(ferr_nf_fbd_name, errnum);
-		branch = (GET_FBD_FAT_IDX(error_reg) == 2) ? 1 : 0;
+		branch = (GET_FBD_NF_IDX(error_reg) == 2) ? 1 : 0;
 
 		pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
 			REDMEMA, &syndrome);
diff --git a/drivers/edac/i7core_edac.c b/drivers/edac/i7core_edac.c
index 3672101..10c8c00 100644
--- a/drivers/edac/i7core_edac.c
+++ b/drivers/edac/i7core_edac.c
@@ -816,7 +816,7 @@
 	struct device_attribute *mattr,				\
 	const char *data, size_t count)				\
 {								\
-	struct mem_ctl_info *mci = to_mci(dev);			\
+	struct mem_ctl_info *mci = dev_get_drvdata(dev);	\
 	struct i7core_pvt *pvt;					\
 	long value;						\
 	int rc;							\
@@ -845,7 +845,7 @@
 	struct device_attribute *mattr,				\
 	char *data)						\
 {								\
-	struct mem_ctl_info *mci = to_mci(dev);			\
+	struct mem_ctl_info *mci = dev_get_drvdata(dev);	\
 	struct i7core_pvt *pvt;					\
 								\
 	pvt = mci->pvt_info;					\
@@ -1052,7 +1052,7 @@
 	struct device_attribute *mattr,				\
 	char *data)						\
 {								\
-	struct mem_ctl_info *mci = to_mci(dev);			\
+	struct mem_ctl_info *mci = dev_get_drvdata(dev);	\
 	struct i7core_pvt *pvt = mci->pvt_info;			\
 								\
 	edac_dbg(1, "\n");					\
diff --git a/drivers/edac/i82975x_edac.c b/drivers/edac/i82975x_edac.c
index 069e26c..a980204 100644
--- a/drivers/edac/i82975x_edac.c
+++ b/drivers/edac/i82975x_edac.c
@@ -370,10 +370,6 @@
 static void i82975x_init_csrows(struct mem_ctl_info *mci,
 		struct pci_dev *pdev, void __iomem *mch_window)
 {
-	static const char *labels[4] = {
-							"DIMM A1", "DIMM A2",
-							"DIMM B1", "DIMM B2"
-						};
 	struct csrow_info *csrow;
 	unsigned long last_cumul_size;
 	u8 value;
@@ -423,9 +419,10 @@
 			dimm = mci->csrows[index]->channels[chan]->dimm;
 
 			dimm->nr_pages = nr_pages / csrow->nr_channels;
-			strncpy(csrow->channels[chan]->dimm->label,
-					labels[(index >> 1) + (chan * 2)],
-					EDAC_MC_LABEL_LEN);
+
+			snprintf(csrow->channels[chan]->dimm->label, EDAC_MC_LABEL_LEN, "DIMM %c%d",
+				 (chan == 0) ? 'A' : 'B',
+				 index);
 			dimm->grain = 1 << 7;	/* 128Byte cache-line resolution */
 			dimm->dtype = i82975x_dram_type(mch_window, index);
 			dimm->mtype = MEM_DDR2; /* I82975x supports only DDR2 */
diff --git a/drivers/edac/mce_amd.c b/drivers/edac/mce_amd.c
index d0c372e..ad63757 100644
--- a/drivers/edac/mce_amd.c
+++ b/drivers/edac/mce_amd.c
@@ -64,7 +64,7 @@
 const char * const ii_msgs[] = { "MEM", "RESV", "IO", "GEN" };
 EXPORT_SYMBOL_GPL(ii_msgs);
 
-static const char * const f15h_ic_mce_desc[] = {
+static const char * const f15h_mc1_mce_desc[] = {
 	"UC during a demand linefill from L2",
 	"Parity error during data load from IC",
 	"Parity error for IC valid bit",
@@ -84,7 +84,7 @@
 	"fetch address FIFO"
 };
 
-static const char * const f15h_cu_mce_desc[] = {
+static const char * const f15h_mc2_mce_desc[] = {
 	"Fill ECC error on data fills",			/* xec = 0x4 */
 	"Fill parity error on insn fills",
 	"Prefetcher request FIFO parity error",
@@ -101,7 +101,7 @@
 	"PRB address parity error"
 };
 
-static const char * const nb_mce_desc[] = {
+static const char * const mc4_mce_desc[] = {
 	"DRAM ECC error detected on the NB",
 	"CRC error detected on HT link",
 	"Link-defined sync error packets detected on HT link",
@@ -123,7 +123,7 @@
 	"ECC Error in the Probe Filter directory"
 };
 
-static const char * const fr_ex_mce_desc[] = {
+static const char * const mc5_mce_desc[] = {
 	"CPU Watchdog timer expire",
 	"Wakeup array dest tag",
 	"AG payload array",
@@ -139,7 +139,7 @@
 	"DE error occurred"
 };
 
-static bool f12h_dc_mce(u16 ec, u8 xec)
+static bool f12h_mc0_mce(u16 ec, u8 xec)
 {
 	bool ret = false;
 
@@ -157,26 +157,26 @@
 	return ret;
 }
 
-static bool f10h_dc_mce(u16 ec, u8 xec)
+static bool f10h_mc0_mce(u16 ec, u8 xec)
 {
 	if (R4(ec) == R4_GEN && LL(ec) == LL_L1) {
 		pr_cont("during data scrub.\n");
 		return true;
 	}
-	return f12h_dc_mce(ec, xec);
+	return f12h_mc0_mce(ec, xec);
 }
 
-static bool k8_dc_mce(u16 ec, u8 xec)
+static bool k8_mc0_mce(u16 ec, u8 xec)
 {
 	if (BUS_ERROR(ec)) {
 		pr_cont("during system linefill.\n");
 		return true;
 	}
 
-	return f10h_dc_mce(ec, xec);
+	return f10h_mc0_mce(ec, xec);
 }
 
-static bool f14h_dc_mce(u16 ec, u8 xec)
+static bool f14h_mc0_mce(u16 ec, u8 xec)
 {
 	u8 r4	 = R4(ec);
 	bool ret = true;
@@ -228,7 +228,7 @@
 	return ret;
 }
 
-static bool f15h_dc_mce(u16 ec, u8 xec)
+static bool f15h_mc0_mce(u16 ec, u8 xec)
 {
 	bool ret = true;
 
@@ -275,12 +275,12 @@
 	return ret;
 }
 
-static void amd_decode_dc_mce(struct mce *m)
+static void decode_mc0_mce(struct mce *m)
 {
 	u16 ec = EC(m->status);
 	u8 xec = XEC(m->status, xec_mask);
 
-	pr_emerg(HW_ERR "Data Cache Error: ");
+	pr_emerg(HW_ERR "MC0 Error: ");
 
 	/* TLB error signatures are the same across families */
 	if (TLB_ERROR(ec)) {
@@ -290,13 +290,13 @@
 					    : (xec ? "multimatch" : "parity")));
 			return;
 		}
-	} else if (fam_ops->dc_mce(ec, xec))
+	} else if (fam_ops->mc0_mce(ec, xec))
 		;
 	else
-		pr_emerg(HW_ERR "Corrupted DC MCE info?\n");
+		pr_emerg(HW_ERR "Corrupted MC0 MCE info?\n");
 }
 
-static bool k8_ic_mce(u16 ec, u8 xec)
+static bool k8_mc1_mce(u16 ec, u8 xec)
 {
 	u8 ll	 = LL(ec);
 	bool ret = true;
@@ -330,7 +330,7 @@
 	return ret;
 }
 
-static bool f14h_ic_mce(u16 ec, u8 xec)
+static bool f14h_mc1_mce(u16 ec, u8 xec)
 {
 	u8 r4    = R4(ec);
 	bool ret = true;
@@ -349,7 +349,7 @@
 	return ret;
 }
 
-static bool f15h_ic_mce(u16 ec, u8 xec)
+static bool f15h_mc1_mce(u16 ec, u8 xec)
 {
 	bool ret = true;
 
@@ -358,19 +358,19 @@
 
 	switch (xec) {
 	case 0x0 ... 0xa:
-		pr_cont("%s.\n", f15h_ic_mce_desc[xec]);
+		pr_cont("%s.\n", f15h_mc1_mce_desc[xec]);
 		break;
 
 	case 0xd:
-		pr_cont("%s.\n", f15h_ic_mce_desc[xec-2]);
+		pr_cont("%s.\n", f15h_mc1_mce_desc[xec-2]);
 		break;
 
 	case 0x10:
-		pr_cont("%s.\n", f15h_ic_mce_desc[xec-4]);
+		pr_cont("%s.\n", f15h_mc1_mce_desc[xec-4]);
 		break;
 
 	case 0x11 ... 0x14:
-		pr_cont("Decoder %s parity error.\n", f15h_ic_mce_desc[xec-4]);
+		pr_cont("Decoder %s parity error.\n", f15h_mc1_mce_desc[xec-4]);
 		break;
 
 	default:
@@ -379,12 +379,12 @@
 	return ret;
 }
 
-static void amd_decode_ic_mce(struct mce *m)
+static void decode_mc1_mce(struct mce *m)
 {
 	u16 ec = EC(m->status);
 	u8 xec = XEC(m->status, xec_mask);
 
-	pr_emerg(HW_ERR "Instruction Cache Error: ");
+	pr_emerg(HW_ERR "MC1 Error: ");
 
 	if (TLB_ERROR(ec))
 		pr_cont("%s TLB %s.\n", LL_MSG(ec),
@@ -393,18 +393,18 @@
 		bool k8 = (boot_cpu_data.x86 == 0xf && (m->status & BIT_64(58)));
 
 		pr_cont("during %s.\n", (k8 ? "system linefill" : "NB data read"));
-	} else if (fam_ops->ic_mce(ec, xec))
+	} else if (fam_ops->mc1_mce(ec, xec))
 		;
 	else
-		pr_emerg(HW_ERR "Corrupted IC MCE info?\n");
+		pr_emerg(HW_ERR "Corrupted MC1 MCE info?\n");
 }
 
-static void amd_decode_bu_mce(struct mce *m)
+static void decode_mc2_mce(struct mce *m)
 {
 	u16 ec = EC(m->status);
 	u8 xec = XEC(m->status, xec_mask);
 
-	pr_emerg(HW_ERR "Bus Unit Error");
+	pr_emerg(HW_ERR "MC2 Error");
 
 	if (xec == 0x1)
 		pr_cont(" in the write data buffers.\n");
@@ -429,24 +429,24 @@
 				pr_cont(": %s parity/ECC error during data "
 					"access from L2.\n", R4_MSG(ec));
 			else
-				goto wrong_bu_mce;
+				goto wrong_mc2_mce;
 		} else
-			goto wrong_bu_mce;
+			goto wrong_mc2_mce;
 	} else
-		goto wrong_bu_mce;
+		goto wrong_mc2_mce;
 
 	return;
 
-wrong_bu_mce:
-	pr_emerg(HW_ERR "Corrupted BU MCE info?\n");
+ wrong_mc2_mce:
+	pr_emerg(HW_ERR "Corrupted MC2 MCE info?\n");
 }
 
-static void amd_decode_cu_mce(struct mce *m)
+static void decode_f15_mc2_mce(struct mce *m)
 {
 	u16 ec = EC(m->status);
 	u8 xec = XEC(m->status, xec_mask);
 
-	pr_emerg(HW_ERR "Combined Unit Error: ");
+	pr_emerg(HW_ERR "MC2 Error: ");
 
 	if (TLB_ERROR(ec)) {
 		if (xec == 0x0)
@@ -454,63 +454,63 @@
 		else if (xec == 0x1)
 			pr_cont("Poison data provided for TLB fill.\n");
 		else
-			goto wrong_cu_mce;
+			goto wrong_f15_mc2_mce;
 	} else if (BUS_ERROR(ec)) {
 		if (xec > 2)
-			goto wrong_cu_mce;
+			goto wrong_f15_mc2_mce;
 
 		pr_cont("Error during attempted NB data read.\n");
 	} else if (MEM_ERROR(ec)) {
 		switch (xec) {
 		case 0x4 ... 0xc:
-			pr_cont("%s.\n", f15h_cu_mce_desc[xec - 0x4]);
+			pr_cont("%s.\n", f15h_mc2_mce_desc[xec - 0x4]);
 			break;
 
 		case 0x10 ... 0x14:
-			pr_cont("%s.\n", f15h_cu_mce_desc[xec - 0x7]);
+			pr_cont("%s.\n", f15h_mc2_mce_desc[xec - 0x7]);
 			break;
 
 		default:
-			goto wrong_cu_mce;
+			goto wrong_f15_mc2_mce;
 		}
 	}
 
 	return;
 
-wrong_cu_mce:
-	pr_emerg(HW_ERR "Corrupted CU MCE info?\n");
+ wrong_f15_mc2_mce:
+	pr_emerg(HW_ERR "Corrupted MC2 MCE info?\n");
 }
 
-static void amd_decode_ls_mce(struct mce *m)
+static void decode_mc3_mce(struct mce *m)
 {
 	u16 ec = EC(m->status);
 	u8 xec = XEC(m->status, xec_mask);
 
 	if (boot_cpu_data.x86 >= 0x14) {
-		pr_emerg("You shouldn't be seeing an LS MCE on this cpu family,"
+		pr_emerg("You shouldn't be seeing MC3 MCE on this cpu family,"
 			 " please report on LKML.\n");
 		return;
 	}
 
-	pr_emerg(HW_ERR "Load Store Error");
+	pr_emerg(HW_ERR "MC3 Error");
 
 	if (xec == 0x0) {
 		u8 r4 = R4(ec);
 
 		if (!BUS_ERROR(ec) || (r4 != R4_DRD && r4 != R4_DWR))
-			goto wrong_ls_mce;
+			goto wrong_mc3_mce;
 
 		pr_cont(" during %s.\n", R4_MSG(ec));
 	} else
-		goto wrong_ls_mce;
+		goto wrong_mc3_mce;
 
 	return;
 
-wrong_ls_mce:
-	pr_emerg(HW_ERR "Corrupted LS MCE info?\n");
+ wrong_mc3_mce:
+	pr_emerg(HW_ERR "Corrupted MC3 MCE info?\n");
 }
 
-void amd_decode_nb_mce(struct mce *m)
+static void decode_mc4_mce(struct mce *m)
 {
 	struct cpuinfo_x86 *c = &boot_cpu_data;
 	int node_id = amd_get_nb_id(m->extcpu);
@@ -518,7 +518,7 @@
 	u8 xec = XEC(m->status, 0x1f);
 	u8 offset = 0;
 
-	pr_emerg(HW_ERR "Northbridge Error (node %d): ", node_id);
+	pr_emerg(HW_ERR "MC4 Error (node %d): ", node_id);
 
 	switch (xec) {
 	case 0x0 ... 0xe:
@@ -527,9 +527,9 @@
 		if (xec == 0x0 || xec == 0x8) {
 			/* no ECCs on F11h */
 			if (c->x86 == 0x11)
-				goto wrong_nb_mce;
+				goto wrong_mc4_mce;
 
-			pr_cont("%s.\n", nb_mce_desc[xec]);
+			pr_cont("%s.\n", mc4_mce_desc[xec]);
 
 			if (nb_bus_decoder)
 				nb_bus_decoder(node_id, m);
@@ -543,14 +543,14 @@
 		else if (BUS_ERROR(ec))
 			pr_cont("DMA Exclusion Vector Table Walk error.\n");
 		else
-			goto wrong_nb_mce;
+			goto wrong_mc4_mce;
 		return;
 
 	case 0x19:
 		if (boot_cpu_data.x86 == 0x15)
 			pr_cont("Compute Unit Data Error.\n");
 		else
-			goto wrong_nb_mce;
+			goto wrong_mc4_mce;
 		return;
 
 	case 0x1c ... 0x1f:
@@ -558,46 +558,44 @@
 		break;
 
 	default:
-		goto wrong_nb_mce;
+		goto wrong_mc4_mce;
 	}
 
-	pr_cont("%s.\n", nb_mce_desc[xec - offset]);
+	pr_cont("%s.\n", mc4_mce_desc[xec - offset]);
 	return;
 
-wrong_nb_mce:
-	pr_emerg(HW_ERR "Corrupted NB MCE info?\n");
+ wrong_mc4_mce:
+	pr_emerg(HW_ERR "Corrupted MC4 MCE info?\n");
 }
-EXPORT_SYMBOL_GPL(amd_decode_nb_mce);
 
-static void amd_decode_fr_mce(struct mce *m)
+static void decode_mc5_mce(struct mce *m)
 {
 	struct cpuinfo_x86 *c = &boot_cpu_data;
 	u8 xec = XEC(m->status, xec_mask);
 
 	if (c->x86 == 0xf || c->x86 == 0x11)
-		goto wrong_fr_mce;
+		goto wrong_mc5_mce;
 
-	pr_emerg(HW_ERR "%s Error: ",
-		 (c->x86 == 0x15 ? "Execution Unit" : "FIROB"));
+	pr_emerg(HW_ERR "MC5 Error: ");
 
 	if (xec == 0x0 || xec == 0xc)
-		pr_cont("%s.\n", fr_ex_mce_desc[xec]);
+		pr_cont("%s.\n", mc5_mce_desc[xec]);
 	else if (xec < 0xd)
-		pr_cont("%s parity error.\n", fr_ex_mce_desc[xec]);
+		pr_cont("%s parity error.\n", mc5_mce_desc[xec]);
 	else
-		goto wrong_fr_mce;
+		goto wrong_mc5_mce;
 
 	return;
 
-wrong_fr_mce:
-	pr_emerg(HW_ERR "Corrupted FR MCE info?\n");
+ wrong_mc5_mce:
+	pr_emerg(HW_ERR "Corrupted MC5 MCE info?\n");
 }
 
-static void amd_decode_fp_mce(struct mce *m)
+static void decode_mc6_mce(struct mce *m)
 {
 	u8 xec = XEC(m->status, xec_mask);
 
-	pr_emerg(HW_ERR "Floating Point Unit Error: ");
+	pr_emerg(HW_ERR "MC6 Error: ");
 
 	switch (xec) {
 	case 0x1:
@@ -621,7 +619,7 @@
 		break;
 
 	default:
-		goto wrong_fp_mce;
+		goto wrong_mc6_mce;
 		break;
 	}
 
@@ -629,8 +627,8 @@
 
 	return;
 
-wrong_fp_mce:
-	pr_emerg(HW_ERR "Corrupted FP MCE info?\n");
+ wrong_mc6_mce:
+	pr_emerg(HW_ERR "Corrupted MC6 MCE info?\n");
 }
 
 static inline void amd_decode_err_code(u16 ec)
@@ -669,17 +667,73 @@
 	return false;
 }
 
+static const char *decode_error_status(struct mce *m)
+{
+	if (m->status & MCI_STATUS_UC) {
+		if (m->status & MCI_STATUS_PCC)
+			return "System Fatal error.";
+		if (m->mcgstatus & MCG_STATUS_RIPV)
+			return "Uncorrected, software restartable error.";
+		return "Uncorrected, software containable error.";
+	}
+
+	if (m->status & MCI_STATUS_DEFERRED)
+		return "Deferred error.";
+
+	return "Corrected error, no action required.";
+}
+
 int amd_decode_mce(struct notifier_block *nb, unsigned long val, void *data)
 {
 	struct mce *m = (struct mce *)data;
-	struct cpuinfo_x86 *c = &boot_cpu_data;
+	struct cpuinfo_x86 *c = &cpu_data(m->extcpu);
 	int ecc;
 
 	if (amd_filter_mce(m))
 		return NOTIFY_STOP;
 
-	pr_emerg(HW_ERR "CPU:%d\tMC%d_STATUS[%s|%s|%s|%s|%s",
-		m->extcpu, m->bank,
+	switch (m->bank) {
+	case 0:
+		decode_mc0_mce(m);
+		break;
+
+	case 1:
+		decode_mc1_mce(m);
+		break;
+
+	case 2:
+		if (c->x86 == 0x15)
+			decode_f15_mc2_mce(m);
+		else
+			decode_mc2_mce(m);
+		break;
+
+	case 3:
+		decode_mc3_mce(m);
+		break;
+
+	case 4:
+		decode_mc4_mce(m);
+		break;
+
+	case 5:
+		decode_mc5_mce(m);
+		break;
+
+	case 6:
+		decode_mc6_mce(m);
+		break;
+
+	default:
+		break;
+	}
+
+	pr_emerg(HW_ERR "Error Status: %s\n", decode_error_status(m));
+
+	pr_emerg(HW_ERR "CPU:%d (%x:%x:%x) MC%d_STATUS[%s|%s|%s|%s|%s",
+		m->extcpu,
+		c->x86, c->x86_model, c->x86_mask,
+		m->bank,
 		((m->status & MCI_STATUS_OVER)	? "Over"  : "-"),
 		((m->status & MCI_STATUS_UC)	? "UE"	  : "CE"),
 		((m->status & MCI_STATUS_MISCV)	? "MiscV" : "-"),
@@ -688,8 +742,8 @@
 
 	if (c->x86 == 0x15)
 		pr_cont("|%s|%s",
-			((m->status & BIT_64(44)) ? "Deferred" : "-"),
-			((m->status & BIT_64(43)) ? "Poison"   : "-"));
+			((m->status & MCI_STATUS_DEFERRED) ? "Deferred" : "-"),
+			((m->status & MCI_STATUS_POISON)   ? "Poison"   : "-"));
 
 	/* do the two bits[14:13] together */
 	ecc = (m->status >> 45) & 0x3;
@@ -699,43 +753,7 @@
 	pr_cont("]: 0x%016llx\n", m->status);
 
 	if (m->status & MCI_STATUS_ADDRV)
-		pr_emerg(HW_ERR "\tMC%d_ADDR: 0x%016llx\n", m->bank, m->addr);
-
-	switch (m->bank) {
-	case 0:
-		amd_decode_dc_mce(m);
-		break;
-
-	case 1:
-		amd_decode_ic_mce(m);
-		break;
-
-	case 2:
-		if (c->x86 == 0x15)
-			amd_decode_cu_mce(m);
-		else
-			amd_decode_bu_mce(m);
-		break;
-
-	case 3:
-		amd_decode_ls_mce(m);
-		break;
-
-	case 4:
-		amd_decode_nb_mce(m);
-		break;
-
-	case 5:
-		amd_decode_fr_mce(m);
-		break;
-
-	case 6:
-		amd_decode_fp_mce(m);
-		break;
-
-	default:
-		break;
-	}
+		pr_emerg(HW_ERR "MC%d_ADDR: 0x%016llx\n", m->bank, m->addr);
 
 	amd_decode_err_code(m->status & 0xffff);
 
@@ -763,35 +781,35 @@
 
 	switch (c->x86) {
 	case 0xf:
-		fam_ops->dc_mce = k8_dc_mce;
-		fam_ops->ic_mce = k8_ic_mce;
+		fam_ops->mc0_mce = k8_mc0_mce;
+		fam_ops->mc1_mce = k8_mc1_mce;
 		break;
 
 	case 0x10:
-		fam_ops->dc_mce = f10h_dc_mce;
-		fam_ops->ic_mce = k8_ic_mce;
+		fam_ops->mc0_mce = f10h_mc0_mce;
+		fam_ops->mc1_mce = k8_mc1_mce;
 		break;
 
 	case 0x11:
-		fam_ops->dc_mce = k8_dc_mce;
-		fam_ops->ic_mce = k8_ic_mce;
+		fam_ops->mc0_mce = k8_mc0_mce;
+		fam_ops->mc1_mce = k8_mc1_mce;
 		break;
 
 	case 0x12:
-		fam_ops->dc_mce = f12h_dc_mce;
-		fam_ops->ic_mce = k8_ic_mce;
+		fam_ops->mc0_mce = f12h_mc0_mce;
+		fam_ops->mc1_mce = k8_mc1_mce;
 		break;
 
 	case 0x14:
 		nb_err_cpumask  = 0x3;
-		fam_ops->dc_mce = f14h_dc_mce;
-		fam_ops->ic_mce = f14h_ic_mce;
+		fam_ops->mc0_mce = f14h_mc0_mce;
+		fam_ops->mc1_mce = f14h_mc1_mce;
 		break;
 
 	case 0x15:
 		xec_mask = 0x1f;
-		fam_ops->dc_mce = f15h_dc_mce;
-		fam_ops->ic_mce = f15h_ic_mce;
+		fam_ops->mc0_mce = f15h_mc0_mce;
+		fam_ops->mc1_mce = f15h_mc1_mce;
 		break;
 
 	default:
diff --git a/drivers/edac/mce_amd.h b/drivers/edac/mce_amd.h
index 8c87a5e..6796799 100644
--- a/drivers/edac/mce_amd.h
+++ b/drivers/edac/mce_amd.h
@@ -29,10 +29,8 @@
 #define R4(x)				(((x) >> 4) & 0xf)
 #define R4_MSG(x)			((R4(x) < 9) ?  rrrr_msgs[R4(x)] : "Wrong R4!")
 
-/*
- * F3x4C bits (MCi_STATUS' high half)
- */
-#define NBSH_ERR_CPU_VAL		BIT(24)
+#define MCI_STATUS_DEFERRED		BIT_64(44)
+#define MCI_STATUS_POISON		BIT_64(43)
 
 enum tt_ids {
 	TT_INSTR = 0,
@@ -78,14 +76,13 @@
  * per-family decoder ops
  */
 struct amd_decoder_ops {
-	bool (*dc_mce)(u16, u8);
-	bool (*ic_mce)(u16, u8);
+	bool (*mc0_mce)(u16, u8);
+	bool (*mc1_mce)(u16, u8);
 };
 
 void amd_report_gart_errors(bool);
 void amd_register_ecc_decoder(void (*f)(int, struct mce *));
 void amd_unregister_ecc_decoder(void (*f)(int, struct mce *));
-void amd_decode_nb_mce(struct mce *);
 int amd_decode_mce(struct notifier_block *nb, unsigned long val, void *data);
 
 #endif /* _EDAC_MCE_AMD_H */
diff --git a/drivers/edac/mce_amd_inj.c b/drivers/edac/mce_amd_inj.c
index 66b5151..2ae78f2 100644
--- a/drivers/edac/mce_amd_inj.c
+++ b/drivers/edac/mce_amd_inj.c
@@ -6,7 +6,7 @@
  * This file may be distributed under the terms of the GNU General Public
  * License version 2.
  *
- * Copyright (c) 2010:  Borislav Petkov <borislav.petkov@amd.com>
+ * Copyright (c) 2010:  Borislav Petkov <bp@alien8.de>
  *			Advanced Micro Devices Inc.
  */
 
@@ -168,6 +168,6 @@
 module_exit(edac_exit_mce_inject);
 
 MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Borislav Petkov <borislav.petkov@amd.com>");
+MODULE_AUTHOR("Borislav Petkov <bp@alien8.de>");
 MODULE_AUTHOR("AMD Inc.");
 MODULE_DESCRIPTION("MCE injection facility for testing MCE decoding");
diff --git a/drivers/firewire/sbp2.c b/drivers/firewire/sbp2.c
index 1162d6b..bb1b392 100644
--- a/drivers/firewire/sbp2.c
+++ b/drivers/firewire/sbp2.c
@@ -1546,6 +1546,8 @@
 	struct sbp2_logical_unit *lu = sdev->hostdata;
 
 	sdev->use_10_for_rw = 1;
+	sdev->no_report_opcodes = 1;
+	sdev->no_write_same = 1;
 
 	if (sbp2_param_exclusive_login)
 		sdev->manage_start_stop = 1;
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index f11d8e3..14a6c29 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -49,6 +49,10 @@
 	def_bool y
 	depends on OF
 
+config GPIO_ACPI
+	def_bool y
+	depends on ACPI
+
 config DEBUG_GPIO
 	bool "Debug GPIO calls"
 	depends on DEBUG_KERNEL
@@ -86,11 +90,26 @@
 	help
 	  Say yes here to enable the GPIO driver for the DA9052 chip.
 
+config GPIO_DA9055
+	tristate "Dialog Semiconductor DA9055 GPIO"
+	depends on MFD_DA9055
+	help
+	  Say yes here to enable the GPIO driver for the DA9055 chip.
+
+	  The Dialog DA9055 PMIC chip has 3 GPIO pins that can be
+	  be controller by this driver.
+
+	  If driver is built as a module it will be called gpio-da9055.
+
 config GPIO_MAX730X
 	tristate
 
 comment "Memory mapped GPIO drivers:"
 
+config GPIO_CLPS711X
+	def_bool y
+	depends on ARCH_CLPS711X
+
 config GPIO_GENERIC_PLATFORM
 	tristate "Generic memory-mapped GPIO controller support (MMIO platform device)"
 	select GPIO_GENERIC
@@ -170,7 +189,7 @@
 
 config GPIO_PL061
 	bool "PrimeCell PL061 GPIO support"
-	depends on ARM_AMBA
+	depends on ARM && ARM_AMBA
 	select GENERIC_IRQ_CHIP
 	help
 	  Say yes here to support the PrimeCell PL061 GPIO device
@@ -181,6 +200,13 @@
 	help
 	  Say yes here to support the PXA GPIO device
 
+config GPIO_SPEAR_SPICS
+	bool "ST SPEAr13xx SPI Chip Select as GPIO support"
+	depends on PLAT_SPEAR
+	select GENERIC_IRQ_CHIP
+	help
+	  Say yes here to support ST SPEAr SPI Chip Select as GPIO device
+
 config GPIO_STA2X11
 	bool "STA2x11/ConneXt GPIO support"
 	depends on MFD_STA2X11
@@ -189,6 +215,14 @@
 	  Say yes here to support the STA2x11/ConneXt GPIO device.
 	  The GPIO module has 128 GPIO pins with alternate functions.
 
+config GPIO_TS5500
+	tristate "TS-5500 DIO blocks and compatibles"
+	help
+	  This driver supports Digital I/O exposed by pin blocks found on some
+	  Technologic Systems platforms. It includes, but is not limited to, 3
+	  blocks of the TS-5500: DIO1, DIO2 and the LCD port, and the TS-5600
+	  LCD port.
+
 config GPIO_VT8500
 	bool "VIA/Wondermedia SoC GPIO Support"
 	depends on ARCH_VT8500
@@ -466,7 +500,7 @@
 
 config GPIO_ADNP
 	tristate "Avionic Design N-bit GPIO expander"
-	depends on I2C && OF
+	depends on I2C && OF_GPIO
 	help
 	  This option enables support for N GPIOs found on Avionic Design
 	  I2C GPIO expanders. The register space will be extended by powers
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 9aeed67..76b3446 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -4,6 +4,7 @@
 
 obj-$(CONFIG_GPIOLIB)		+= gpiolib.o devres.o
 obj-$(CONFIG_OF_GPIO)		+= gpiolib-of.o
+obj-$(CONFIG_GPIO_ACPI)		+= gpiolib-acpi.o
 
 # Device drivers. Generally keep list sorted alphabetically
 obj-$(CONFIG_GPIO_GENERIC)	+= gpio-generic.o
@@ -16,8 +17,10 @@
 obj-$(CONFIG_GPIO_AMD8111)	+= gpio-amd8111.o
 obj-$(CONFIG_GPIO_ARIZONA)	+= gpio-arizona.o
 obj-$(CONFIG_GPIO_BT8XX)	+= gpio-bt8xx.o
+obj-$(CONFIG_GPIO_CLPS711X)	+= gpio-clps711x.o
 obj-$(CONFIG_GPIO_CS5535)	+= gpio-cs5535.o
 obj-$(CONFIG_GPIO_DA9052)	+= gpio-da9052.o
+obj-$(CONFIG_GPIO_DA9055)	+= gpio-da9055.o
 obj-$(CONFIG_ARCH_DAVINCI)	+= gpio-davinci.o
 obj-$(CONFIG_GPIO_EM)		+= gpio-em.o
 obj-$(CONFIG_GPIO_EP93XX)	+= gpio-ep93xx.o
@@ -57,6 +60,7 @@
 obj-$(CONFIG_ARCH_SA1100)	+= gpio-sa1100.o
 obj-$(CONFIG_GPIO_SCH)		+= gpio-sch.o
 obj-$(CONFIG_GPIO_SODAVILLE)	+= gpio-sodaville.o
+obj-$(CONFIG_GPIO_SPEAR_SPICS)	+= gpio-spear-spics.o
 obj-$(CONFIG_GPIO_STA2X11)	+= gpio-sta2x11.o
 obj-$(CONFIG_GPIO_STMPE)	+= gpio-stmpe.o
 obj-$(CONFIG_GPIO_STP_XWAY)	+= gpio-stp-xway.o
@@ -68,6 +72,7 @@
 obj-$(CONFIG_GPIO_TPS6586X)	+= gpio-tps6586x.o
 obj-$(CONFIG_GPIO_TPS65910)	+= gpio-tps65910.o
 obj-$(CONFIG_GPIO_TPS65912)	+= gpio-tps65912.o
+obj-$(CONFIG_GPIO_TS5500)	+= gpio-ts5500.o
 obj-$(CONFIG_GPIO_TWL4030)	+= gpio-twl4030.o
 obj-$(CONFIG_GPIO_TWL6040)	+= gpio-twl6040.o
 obj-$(CONFIG_GPIO_UCB1400)	+= gpio-ucb1400.o
diff --git a/drivers/gpio/gpio-clps711x.c b/drivers/gpio/gpio-clps711x.c
new file mode 100644
index 0000000..ce63b75
--- /dev/null
+++ b/drivers/gpio/gpio-clps711x.c
@@ -0,0 +1,199 @@
+/*
+ *  CLPS711X GPIO driver
+ *
+ *  Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+
+#include <mach/hardware.h>
+
+#define CLPS711X_GPIO_PORTS	5
+#define CLPS711X_GPIO_NAME	"gpio-clps711x"
+
+struct clps711x_gpio {
+	struct gpio_chip	chip[CLPS711X_GPIO_PORTS];
+	spinlock_t		lock;
+};
+
+static void __iomem *clps711x_ports[] = {
+	CLPS711X_VIRT_BASE + PADR,
+	CLPS711X_VIRT_BASE + PBDR,
+	CLPS711X_VIRT_BASE + PCDR,
+	CLPS711X_VIRT_BASE + PDDR,
+	CLPS711X_VIRT_BASE + PEDR,
+};
+
+static void __iomem *clps711x_pdirs[] = {
+	CLPS711X_VIRT_BASE + PADDR,
+	CLPS711X_VIRT_BASE + PBDDR,
+	CLPS711X_VIRT_BASE + PCDDR,
+	CLPS711X_VIRT_BASE + PDDDR,
+	CLPS711X_VIRT_BASE + PEDDR,
+};
+
+#define clps711x_port(x)	clps711x_ports[x->base / 8]
+#define clps711x_pdir(x)	clps711x_pdirs[x->base / 8]
+
+static int gpio_clps711x_get(struct gpio_chip *chip, unsigned offset)
+{
+	return !!(readb(clps711x_port(chip)) & (1 << offset));
+}
+
+static void gpio_clps711x_set(struct gpio_chip *chip, unsigned offset,
+			      int value)
+{
+	int tmp;
+	unsigned long flags;
+	struct clps711x_gpio *gpio = dev_get_drvdata(chip->dev);
+
+	spin_lock_irqsave(&gpio->lock, flags);
+	tmp = readb(clps711x_port(chip)) & ~(1 << offset);
+	if (value)
+		tmp |= 1 << offset;
+	writeb(tmp, clps711x_port(chip));
+	spin_unlock_irqrestore(&gpio->lock, flags);
+}
+
+static int gpio_clps711x_dir_in(struct gpio_chip *chip, unsigned offset)
+{
+	int tmp;
+	unsigned long flags;
+	struct clps711x_gpio *gpio = dev_get_drvdata(chip->dev);
+
+	spin_lock_irqsave(&gpio->lock, flags);
+	tmp = readb(clps711x_pdir(chip)) & ~(1 << offset);
+	writeb(tmp, clps711x_pdir(chip));
+	spin_unlock_irqrestore(&gpio->lock, flags);
+
+	return 0;
+}
+
+static int gpio_clps711x_dir_out(struct gpio_chip *chip, unsigned offset,
+				 int value)
+{
+	int tmp;
+	unsigned long flags;
+	struct clps711x_gpio *gpio = dev_get_drvdata(chip->dev);
+
+	spin_lock_irqsave(&gpio->lock, flags);
+	tmp = readb(clps711x_pdir(chip)) | (1 << offset);
+	writeb(tmp, clps711x_pdir(chip));
+	tmp = readb(clps711x_port(chip)) & ~(1 << offset);
+	if (value)
+		tmp |= 1 << offset;
+	writeb(tmp, clps711x_port(chip));
+	spin_unlock_irqrestore(&gpio->lock, flags);
+
+	return 0;
+}
+
+static int gpio_clps711x_dir_in_inv(struct gpio_chip *chip, unsigned offset)
+{
+	int tmp;
+	unsigned long flags;
+	struct clps711x_gpio *gpio = dev_get_drvdata(chip->dev);
+
+	spin_lock_irqsave(&gpio->lock, flags);
+	tmp = readb(clps711x_pdir(chip)) | (1 << offset);
+	writeb(tmp, clps711x_pdir(chip));
+	spin_unlock_irqrestore(&gpio->lock, flags);
+
+	return 0;
+}
+
+static int gpio_clps711x_dir_out_inv(struct gpio_chip *chip, unsigned offset,
+				     int value)
+{
+	int tmp;
+	unsigned long flags;
+	struct clps711x_gpio *gpio = dev_get_drvdata(chip->dev);
+
+	spin_lock_irqsave(&gpio->lock, flags);
+	tmp = readb(clps711x_pdir(chip)) & ~(1 << offset);
+	writeb(tmp, clps711x_pdir(chip));
+	tmp = readb(clps711x_port(chip)) & ~(1 << offset);
+	if (value)
+		tmp |= 1 << offset;
+	writeb(tmp, clps711x_port(chip));
+	spin_unlock_irqrestore(&gpio->lock, flags);
+
+	return 0;
+}
+
+static struct {
+	char	*name;
+	int	nr;
+	int	inv_dir;
+} clps711x_gpio_ports[] __initconst = {
+	{ "PORTA", 8, 0, },
+	{ "PORTB", 8, 0, },
+	{ "PORTC", 8, 0, },
+	{ "PORTD", 8, 1, },
+	{ "PORTE", 3, 0, },
+};
+
+static int __init gpio_clps711x_init(void)
+{
+	int i;
+	struct platform_device *pdev;
+	struct clps711x_gpio *gpio;
+
+	pdev = platform_device_alloc(CLPS711X_GPIO_NAME, 0);
+	if (!pdev) {
+		pr_err("Cannot create platform device: %s\n",
+		       CLPS711X_GPIO_NAME);
+		return -ENOMEM;
+	}
+
+	platform_device_add(pdev);
+
+	gpio = devm_kzalloc(&pdev->dev, sizeof(struct clps711x_gpio),
+			    GFP_KERNEL);
+	if (!gpio) {
+		dev_err(&pdev->dev, "GPIO allocating memory error\n");
+		platform_device_unregister(pdev);
+		return -ENOMEM;
+	}
+
+	platform_set_drvdata(pdev, gpio);
+
+	spin_lock_init(&gpio->lock);
+
+	for (i = 0; i < CLPS711X_GPIO_PORTS; i++) {
+		gpio->chip[i].owner		= THIS_MODULE;
+		gpio->chip[i].dev		= &pdev->dev;
+		gpio->chip[i].label		= clps711x_gpio_ports[i].name;
+		gpio->chip[i].base		= i * 8;
+		gpio->chip[i].ngpio		= clps711x_gpio_ports[i].nr;
+		gpio->chip[i].get		= gpio_clps711x_get;
+		gpio->chip[i].set		= gpio_clps711x_set;
+		if (!clps711x_gpio_ports[i].inv_dir) {
+			gpio->chip[i].direction_input = gpio_clps711x_dir_in;
+			gpio->chip[i].direction_output = gpio_clps711x_dir_out;
+		} else {
+			gpio->chip[i].direction_input = gpio_clps711x_dir_in_inv;
+			gpio->chip[i].direction_output = gpio_clps711x_dir_out_inv;
+		}
+		WARN_ON(gpiochip_add(&gpio->chip[i]));
+	}
+
+	dev_info(&pdev->dev, "GPIO driver initialized\n");
+
+	return 0;
+}
+arch_initcall(gpio_clps711x_init);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Alexander Shiyan <shc_work@mail.ru>");
+MODULE_DESCRIPTION("CLPS711X GPIO driver");
diff --git a/drivers/gpio/gpio-da9055.c b/drivers/gpio/gpio-da9055.c
new file mode 100644
index 0000000..55d83c7
--- /dev/null
+++ b/drivers/gpio/gpio-da9055.c
@@ -0,0 +1,204 @@
+/*
+ * GPIO Driver for Dialog DA9055 PMICs.
+ *
+ * Copyright(c) 2012 Dialog Semiconductor Ltd.
+ *
+ * Author: David Dajun Chen <dchen@diasemi.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <linux/mfd/da9055/core.h>
+#include <linux/mfd/da9055/reg.h>
+#include <linux/mfd/da9055/pdata.h>
+
+#define DA9055_VDD_IO			0x0
+#define DA9055_PUSH_PULL		0x3
+#define DA9055_ACT_LOW			0x0
+#define DA9055_GPI			0x1
+#define DA9055_PORT_MASK		0x3
+#define DA9055_PORT_SHIFT(offset)	(4 * (offset % 2))
+
+#define DA9055_INPUT			DA9055_GPI
+#define DA9055_OUTPUT			DA9055_PUSH_PULL
+#define DA9055_IRQ_GPI0			3
+
+struct da9055_gpio {
+	struct da9055 *da9055;
+	struct gpio_chip gp;
+};
+
+static inline struct da9055_gpio *to_da9055_gpio(struct gpio_chip *chip)
+{
+	return container_of(chip, struct da9055_gpio, gp);
+}
+
+static int da9055_gpio_get(struct gpio_chip *gc, unsigned offset)
+{
+	struct da9055_gpio *gpio = to_da9055_gpio(gc);
+	int gpio_direction = 0;
+	int ret;
+
+	/* Get GPIO direction */
+	ret = da9055_reg_read(gpio->da9055, (offset >> 1) + DA9055_REG_GPIO0_1);
+	if (ret < 0)
+		return ret;
+
+	gpio_direction = ret & (DA9055_PORT_MASK) << DA9055_PORT_SHIFT(offset);
+	gpio_direction >>= DA9055_PORT_SHIFT(offset);
+	switch (gpio_direction) {
+	case DA9055_INPUT:
+		ret = da9055_reg_read(gpio->da9055, DA9055_REG_STATUS_B);
+		if (ret < 0)
+			return ret;
+		break;
+	case DA9055_OUTPUT:
+		ret = da9055_reg_read(gpio->da9055, DA9055_REG_GPIO_MODE0_2);
+		if (ret < 0)
+			return ret;
+	}
+
+	return ret & (1 << offset);
+
+}
+
+static void da9055_gpio_set(struct gpio_chip *gc, unsigned offset, int value)
+{
+	struct da9055_gpio *gpio = to_da9055_gpio(gc);
+
+	da9055_reg_update(gpio->da9055,
+			DA9055_REG_GPIO_MODE0_2,
+			1 << offset,
+			value << offset);
+}
+
+static int da9055_gpio_direction_input(struct gpio_chip *gc, unsigned offset)
+{
+	struct da9055_gpio *gpio = to_da9055_gpio(gc);
+	unsigned char reg_byte;
+
+	reg_byte = (DA9055_ACT_LOW | DA9055_GPI)
+				<< DA9055_PORT_SHIFT(offset);
+
+	return da9055_reg_update(gpio->da9055, (offset >> 1) +
+				DA9055_REG_GPIO0_1,
+				DA9055_PORT_MASK <<
+				DA9055_PORT_SHIFT(offset),
+				reg_byte);
+}
+
+static int da9055_gpio_direction_output(struct gpio_chip *gc,
+					unsigned offset, int value)
+{
+	struct da9055_gpio *gpio = to_da9055_gpio(gc);
+	unsigned char reg_byte;
+	int ret;
+
+	reg_byte = (DA9055_VDD_IO | DA9055_PUSH_PULL)
+					<< DA9055_PORT_SHIFT(offset);
+
+	ret = da9055_reg_update(gpio->da9055, (offset >> 1) +
+				DA9055_REG_GPIO0_1,
+				DA9055_PORT_MASK <<
+				DA9055_PORT_SHIFT(offset),
+				reg_byte);
+	if (ret < 0)
+		return ret;
+
+	da9055_gpio_set(gc, offset, value);
+
+	return 0;
+}
+
+static int da9055_gpio_to_irq(struct gpio_chip *gc, u32 offset)
+{
+	struct da9055_gpio *gpio = to_da9055_gpio(gc);
+	struct da9055 *da9055 = gpio->da9055;
+
+	return regmap_irq_get_virq(da9055->irq_data,
+				  DA9055_IRQ_GPI0 + offset);
+}
+
+static struct gpio_chip reference_gp __devinitdata = {
+	.label = "da9055-gpio",
+	.owner = THIS_MODULE,
+	.get = da9055_gpio_get,
+	.set = da9055_gpio_set,
+	.direction_input = da9055_gpio_direction_input,
+	.direction_output = da9055_gpio_direction_output,
+	.to_irq = da9055_gpio_to_irq,
+	.can_sleep = 1,
+	.ngpio = 3,
+	.base = -1,
+};
+
+static int __devinit da9055_gpio_probe(struct platform_device *pdev)
+{
+	struct da9055_gpio *gpio;
+	struct da9055_pdata *pdata;
+	int ret;
+
+	gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
+	if (gpio == NULL)
+		return -ENOMEM;
+
+	gpio->da9055 = dev_get_drvdata(pdev->dev.parent);
+	pdata = gpio->da9055->dev->platform_data;
+
+	gpio->gp = reference_gp;
+	if (pdata && pdata->gpio_base)
+		gpio->gp.base = pdata->gpio_base;
+
+	ret = gpiochip_add(&gpio->gp);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret);
+		goto err_mem;
+	}
+
+	platform_set_drvdata(pdev, gpio);
+
+	return 0;
+
+err_mem:
+	return ret;
+}
+
+static int __devexit da9055_gpio_remove(struct platform_device *pdev)
+{
+	struct da9055_gpio *gpio = platform_get_drvdata(pdev);
+
+	return gpiochip_remove(&gpio->gp);
+}
+
+static struct platform_driver da9055_gpio_driver = {
+	.probe = da9055_gpio_probe,
+	.remove = __devexit_p(da9055_gpio_remove),
+	.driver = {
+		.name	= "da9055-gpio",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init da9055_gpio_init(void)
+{
+	return platform_driver_register(&da9055_gpio_driver);
+}
+subsys_initcall(da9055_gpio_init);
+
+static void __exit da9055_gpio_exit(void)
+{
+	platform_driver_unregister(&da9055_gpio_driver);
+}
+module_exit(da9055_gpio_exit);
+
+MODULE_AUTHOR("David Dajun Chen <dchen@diasemi.com>");
+MODULE_DESCRIPTION("DA9055 GPIO Device Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:da9055-gpio");
diff --git a/drivers/gpio/gpio-em.c b/drivers/gpio/gpio-em.c
index 320a718..bdc8302 100644
--- a/drivers/gpio/gpio-em.c
+++ b/drivers/gpio/gpio-em.c
@@ -35,7 +35,6 @@
 struct em_gio_priv {
 	void __iomem *base0;
 	void __iomem *base1;
-	unsigned int irq_base;
 	spinlock_t sense_lock;
 	struct platform_device *pdev;
 	struct gpio_chip gpio_chip;
@@ -214,7 +213,7 @@
 
 static int em_gio_to_irq(struct gpio_chip *chip, unsigned offset)
 {
-	return irq_find_mapping(gpio_to_priv(chip)->irq_domain, offset);
+	return irq_create_mapping(gpio_to_priv(chip)->irq_domain, offset);
 }
 
 static int em_gio_irq_domain_map(struct irq_domain *h, unsigned int virq,
@@ -234,40 +233,6 @@
 	.map	= em_gio_irq_domain_map,
 };
 
-static int __devinit em_gio_irq_domain_init(struct em_gio_priv *p)
-{
-	struct platform_device *pdev = p->pdev;
-	struct gpio_em_config *pdata = pdev->dev.platform_data;
-
-	p->irq_base = irq_alloc_descs(pdata->irq_base, 0,
-				      pdata->number_of_pins, numa_node_id());
-	if (p->irq_base < 0) {
-		dev_err(&pdev->dev, "cannot get irq_desc\n");
-		return p->irq_base;
-	}
-	pr_debug("gio: hw base = %d, nr = %d, sw base = %d\n",
-		 pdata->gpio_base, pdata->number_of_pins, p->irq_base);
-
-	p->irq_domain = irq_domain_add_legacy(pdev->dev.of_node,
-					      pdata->number_of_pins,
-					      p->irq_base, 0,
-					      &em_gio_irq_domain_ops, p);
-	if (!p->irq_domain) {
-		irq_free_descs(p->irq_base, pdata->number_of_pins);
-		return -ENXIO;
-	}
-
-	return 0;
-}
-
-static void em_gio_irq_domain_cleanup(struct em_gio_priv *p)
-{
-	struct gpio_em_config *pdata = p->pdev->dev.platform_data;
-
-	irq_free_descs(p->irq_base, pdata->number_of_pins);
-	/* FIXME: irq domain wants to be freed! */
-}
-
 static int em_gio_probe(struct platform_device *pdev)
 {
 	struct gpio_em_config *pdata = pdev->dev.platform_data;
@@ -334,8 +299,11 @@
 	irq_chip->irq_set_type = em_gio_irq_set_type;
 	irq_chip->flags	= IRQCHIP_SKIP_SET_WAKE;
 
-	ret = em_gio_irq_domain_init(p);
-	if (ret) {
+	p->irq_domain = irq_domain_add_linear(pdev->dev.of_node,
+					      pdata->number_of_pins,
+					      &em_gio_irq_domain_ops, p);
+	if (!p->irq_domain) {
+		ret = -ENXIO;
 		dev_err(&pdev->dev, "cannot initialize irq domain\n");
 		goto err3;
 	}
@@ -364,7 +332,7 @@
 err5:
 	free_irq(irq[0]->start, pdev);
 err4:
-	em_gio_irq_domain_cleanup(p);
+	irq_domain_remove(p->irq_domain);
 err3:
 	iounmap(p->base1);
 err2:
@@ -390,7 +358,7 @@
 
 	free_irq(irq[1]->start, pdev);
 	free_irq(irq[0]->start, pdev);
-	em_gio_irq_domain_cleanup(p);
+	irq_domain_remove(p->irq_domain);
 	iounmap(p->base1);
 	iounmap(p->base0);
 	kfree(p);
diff --git a/drivers/gpio/gpio-max730x.c b/drivers/gpio/gpio-max730x.c
index 22b7582..0009234 100644
--- a/drivers/gpio/gpio-max730x.c
+++ b/drivers/gpio/gpio-max730x.c
@@ -167,10 +167,6 @@
 	int i, ret;
 
 	pdata = dev->platform_data;
-	if (!pdata || !pdata->base) {
-		dev_err(dev, "incorrect or missing platform data\n");
-		return -EINVAL;
-	}
 
 	mutex_init(&ts->lock);
 	dev_set_drvdata(dev, ts);
@@ -178,7 +174,12 @@
 	/* Power up the chip and disable IRQ output */
 	ts->write(dev, 0x04, 0x01);
 
-	ts->input_pullup_active = pdata->input_pullup_active;
+	if (pdata) {
+		ts->input_pullup_active = pdata->input_pullup_active;
+		ts->chip.base = pdata->base;
+	} else {
+		ts->chip.base = -1;
+	}
 	ts->chip.label = dev->driver->name;
 
 	ts->chip.direction_input = max7301_direction_input;
@@ -186,7 +187,6 @@
 	ts->chip.direction_output = max7301_direction_output;
 	ts->chip.set = max7301_set;
 
-	ts->chip.base = pdata->base;
 	ts->chip.ngpio = PIN_NUMBER;
 	ts->chip.can_sleep = 1;
 	ts->chip.dev = dev;
diff --git a/drivers/gpio/gpio-mcp23s08.c b/drivers/gpio/gpio-mcp23s08.c
index ce620f1..3cea0ea 100644
--- a/drivers/gpio/gpio-mcp23s08.c
+++ b/drivers/gpio/gpio-mcp23s08.c
@@ -77,7 +77,7 @@
 
 /*----------------------------------------------------------------------*/
 
-#ifdef CONFIG_I2C
+#if IS_ENABLED(CONFIG_I2C)
 
 static int mcp23008_read(struct mcp23s08 *mcp, unsigned reg)
 {
@@ -399,7 +399,7 @@
 		break;
 #endif /* CONFIG_SPI_MASTER */
 
-#ifdef CONFIG_I2C
+#if IS_ENABLED(CONFIG_I2C)
 	case MCP_TYPE_008:
 		mcp->ops = &mcp23008_ops;
 		mcp->chip.ngpio = 8;
@@ -473,7 +473,7 @@
 
 /*----------------------------------------------------------------------*/
 
-#ifdef CONFIG_I2C
+#if IS_ENABLED(CONFIG_I2C)
 
 static int mcp230xx_probe(struct i2c_client *client,
 				    const struct i2c_device_id *id)
diff --git a/drivers/gpio/gpio-mvebu.c b/drivers/gpio/gpio-mvebu.c
index f2a04ba..d767b53 100644
--- a/drivers/gpio/gpio-mvebu.c
+++ b/drivers/gpio/gpio-mvebu.c
@@ -92,6 +92,11 @@
 	return mvchip->membase + GPIO_OUT_OFF;
 }
 
+static inline void __iomem *mvebu_gpioreg_blink(struct mvebu_gpio_chip *mvchip)
+{
+	return mvchip->membase + GPIO_BLINK_EN_OFF;
+}
+
 static inline void __iomem *mvebu_gpioreg_io_conf(struct mvebu_gpio_chip *mvchip)
 {
 	return mvchip->membase + GPIO_IO_CONF_OFF;
@@ -163,12 +168,12 @@
  * Functions implementing the gpio_chip methods
  */
 
-int mvebu_gpio_request(struct gpio_chip *chip, unsigned pin)
+static int mvebu_gpio_request(struct gpio_chip *chip, unsigned pin)
 {
 	return pinctrl_request_gpio(chip->base + pin);
 }
 
-void mvebu_gpio_free(struct gpio_chip *chip, unsigned pin)
+static void mvebu_gpio_free(struct gpio_chip *chip, unsigned pin)
 {
 	pinctrl_free_gpio(chip->base + pin);
 }
@@ -206,6 +211,23 @@
 	return (u >> pin) & 1;
 }
 
+static void mvebu_gpio_blink(struct gpio_chip *chip, unsigned pin, int value)
+{
+	struct mvebu_gpio_chip *mvchip =
+		container_of(chip, struct mvebu_gpio_chip, chip);
+	unsigned long flags;
+	u32 u;
+
+	spin_lock_irqsave(&mvchip->lock, flags);
+	u = readl_relaxed(mvebu_gpioreg_blink(mvchip));
+	if (value)
+		u |= 1 << pin;
+	else
+		u &= ~(1 << pin);
+	writel_relaxed(u, mvebu_gpioreg_blink(mvchip));
+	spin_unlock_irqrestore(&mvchip->lock, flags);
+}
+
 static int mvebu_gpio_direction_input(struct gpio_chip *chip, unsigned pin)
 {
 	struct mvebu_gpio_chip *mvchip =
@@ -244,6 +266,7 @@
 	if (ret)
 		return ret;
 
+	mvebu_gpio_blink(chip, pin, 0);
 	mvebu_gpio_set(chip, pin, value);
 
 	spin_lock_irqsave(&mvchip->lock, flags);
@@ -523,6 +546,7 @@
 	mvchip->chip.label = dev_name(&pdev->dev);
 	mvchip->chip.dev = &pdev->dev;
 	mvchip->chip.request = mvebu_gpio_request;
+	mvchip->chip.free = mvebu_gpio_free;
 	mvchip->chip.direction_input = mvebu_gpio_direction_input;
 	mvchip->chip.get = mvebu_gpio_get;
 	mvchip->chip.direction_output = mvebu_gpio_direction_output;
@@ -650,8 +674,8 @@
 			       IRQ_NOREQUEST, IRQ_LEVEL | IRQ_NOPROBE);
 
 	/* Setup irq domain on top of the generic chip. */
-	mvchip->domain = irq_domain_add_legacy(np, mvchip->chip.ngpio,
-					       mvchip->irqbase, 0,
+	mvchip->domain = irq_domain_add_simple(np, mvchip->chip.ngpio,
+					       mvchip->irqbase,
 					       &irq_domain_simple_ops,
 					       mvchip);
 	if (!mvchip->domain) {
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 148a4f2..f1fbedb2 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -1105,7 +1105,7 @@
 	if (!pdata)
 		return -EINVAL;
 
-	bank = devm_kzalloc(&pdev->dev, sizeof(struct gpio_bank), GFP_KERNEL);
+	bank = devm_kzalloc(dev, sizeof(struct gpio_bank), GFP_KERNEL);
 	if (!bank) {
 		dev_err(dev, "Memory alloc failed\n");
 		return -ENOMEM;
diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c
index fff7c2b..cc102d2 100644
--- a/drivers/gpio/gpio-pca953x.c
+++ b/drivers/gpio/gpio-pca953x.c
@@ -16,6 +16,7 @@
 #include <linux/gpio.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/irqdomain.h>
 #include <linux/i2c.h>
 #include <linux/i2c/pca953x.h>
 #include <linux/slab.h>
@@ -83,6 +84,7 @@
 	u32 irq_trig_raise;
 	u32 irq_trig_fall;
 	int	 irq_base;
+	struct irq_domain *domain;
 #endif
 
 	struct i2c_client *client;
@@ -333,14 +335,14 @@
 {
 	struct pca953x_chip *chip = irq_data_get_irq_chip_data(d);
 
-	chip->irq_mask &= ~(1 << (d->irq - chip->irq_base));
+	chip->irq_mask &= ~(1 << d->hwirq);
 }
 
 static void pca953x_irq_unmask(struct irq_data *d)
 {
 	struct pca953x_chip *chip = irq_data_get_irq_chip_data(d);
 
-	chip->irq_mask |= 1 << (d->irq - chip->irq_base);
+	chip->irq_mask |= 1 << d->hwirq;
 }
 
 static void pca953x_irq_bus_lock(struct irq_data *d)
@@ -372,8 +374,7 @@
 static int pca953x_irq_set_type(struct irq_data *d, unsigned int type)
 {
 	struct pca953x_chip *chip = irq_data_get_irq_chip_data(d);
-	u32 level = d->irq - chip->irq_base;
-	u32 mask = 1 << level;
+	u32 mask = 1 << d->hwirq;
 
 	if (!(type & IRQ_TYPE_EDGE_BOTH)) {
 		dev_err(&chip->client->dev, "irq %d: unsupported type %d\n",
@@ -454,7 +455,7 @@
 
 	do {
 		level = __ffs(pending);
-		handle_nested_irq(level + chip->irq_base);
+		handle_nested_irq(irq_find_mapping(chip->domain, level));
 
 		pending &= ~(1 << level);
 	} while (pending);
@@ -499,6 +500,17 @@
 		if (chip->irq_base < 0)
 			goto out_failed;
 
+		chip->domain = irq_domain_add_legacy(client->dev.of_node,
+						chip->gpio_chip.ngpio,
+						chip->irq_base,
+						0,
+						&irq_domain_simple_ops,
+						NULL);
+		if (!chip->domain) {
+			ret = -ENODEV;
+			goto out_irqdesc_free;
+		}
+
 		for (lvl = 0; lvl < chip->gpio_chip.ngpio; lvl++) {
 			int irq = lvl + chip->irq_base;
 
@@ -521,7 +533,7 @@
 		if (ret) {
 			dev_err(&client->dev, "failed to request irq %d\n",
 				client->irq);
-			goto out_failed;
+			goto out_irqdesc_free;
 		}
 
 		chip->gpio_chip.to_irq = pca953x_gpio_to_irq;
@@ -529,6 +541,8 @@
 
 	return 0;
 
+out_irqdesc_free:
+	irq_free_descs(chip->irq_base, chip->gpio_chip.ngpio);
 out_failed:
 	chip->irq_base = -1;
 	return ret;
@@ -751,9 +765,38 @@
 	return 0;
 }
 
+static const struct of_device_id pca953x_dt_ids[] = {
+	{ .compatible = "nxp,pca9534", },
+	{ .compatible = "nxp,pca9535", },
+	{ .compatible = "nxp,pca9536", },
+	{ .compatible = "nxp,pca9537", },
+	{ .compatible = "nxp,pca9538", },
+	{ .compatible = "nxp,pca9539", },
+	{ .compatible = "nxp,pca9554", },
+	{ .compatible = "nxp,pca9555", },
+	{ .compatible = "nxp,pca9556", },
+	{ .compatible = "nxp,pca9557", },
+	{ .compatible = "nxp,pca9574", },
+	{ .compatible = "nxp,pca9575", },
+
+	{ .compatible = "maxim,max7310", },
+	{ .compatible = "maxim,max7312", },
+	{ .compatible = "maxim,max7313", },
+	{ .compatible = "maxim,max7315", },
+
+	{ .compatible = "ti,pca6107", },
+	{ .compatible = "ti,tca6408", },
+	{ .compatible = "ti,tca6416", },
+	{ .compatible = "ti,tca6424", },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(of, pca953x_dt_ids);
+
 static struct i2c_driver pca953x_driver = {
 	.driver = {
 		.name	= "pca953x",
+		.of_match_table = pca953x_dt_ids,
 	},
 	.probe		= pca953x_probe,
 	.remove		= pca953x_remove,
diff --git a/drivers/gpio/gpio-pcf857x.c b/drivers/gpio/gpio-pcf857x.c
index 16af35c..a19b745 100644
--- a/drivers/gpio/gpio-pcf857x.c
+++ b/drivers/gpio/gpio-pcf857x.c
@@ -223,11 +223,11 @@
 
 static int pcf857x_irq_domain_init(struct pcf857x *gpio,
 				   struct pcf857x_platform_data *pdata,
-				   struct device *dev)
+				   struct i2c_client *client)
 {
 	int status;
 
-	gpio->irq_domain = irq_domain_add_linear(dev->of_node,
+	gpio->irq_domain = irq_domain_add_linear(client->dev.of_node,
 						 gpio->chip.ngpio,
 						 &pcf857x_irq_domain_ops,
 						 NULL);
@@ -235,15 +235,15 @@
 		goto fail;
 
 	/* enable real irq */
-	status = request_irq(pdata->irq, pcf857x_irq_demux, 0,
-			     dev_name(dev), gpio);
+	status = request_irq(client->irq, pcf857x_irq_demux, 0,
+			     dev_name(&client->dev), gpio);
 	if (status)
 		goto fail;
 
 	/* enable gpio_to_irq() */
 	INIT_WORK(&gpio->work, pcf857x_irq_demux_work);
 	gpio->chip.to_irq	= pcf857x_to_irq;
-	gpio->irq		= pdata->irq;
+	gpio->irq		= client->irq;
 
 	return 0;
 
@@ -285,8 +285,8 @@
 	gpio->chip.ngpio		= id->driver_data;
 
 	/* enable gpio_to_irq() if platform has settings */
-	if (pdata && pdata->irq) {
-		status = pcf857x_irq_domain_init(gpio, pdata, &client->dev);
+	if (pdata && client->irq) {
+		status = pcf857x_irq_domain_init(gpio, pdata, client);
 		if (status < 0) {
 			dev_err(&client->dev, "irq_domain init failed\n");
 			goto fail;
@@ -368,15 +368,6 @@
 	if (status < 0)
 		goto fail;
 
-	/* NOTE: these chips can issue "some pin-changed" IRQs, which we
-	 * don't yet even try to use.  Among other issues, the relevant
-	 * genirq state isn't available to modular drivers; and most irq
-	 * methods can't be called from sleeping contexts.
-	 */
-
-	dev_info(&client->dev, "%s\n",
-			client->irq ? " (irq ignored)" : "");
-
 	/* Let platform code set up the GPIOs and their users.
 	 * Now is the first time anyone could use them.
 	 */
@@ -388,13 +379,15 @@
 			dev_warn(&client->dev, "setup --> %d\n", status);
 	}
 
+	dev_info(&client->dev, "probed\n");
+
 	return 0;
 
 fail:
 	dev_dbg(&client->dev, "probe error %d for '%s'\n",
 			status, client->name);
 
-	if (pdata && pdata->irq)
+	if (pdata && client->irq)
 		pcf857x_irq_domain_cleanup(gpio);
 
 	kfree(gpio);
@@ -418,7 +411,7 @@
 		}
 	}
 
-	if (pdata && pdata->irq)
+	if (pdata && client->irq)
 		pcf857x_irq_domain_cleanup(gpio);
 
 	status = gpiochip_remove(&gpio->chip);
diff --git a/drivers/gpio/gpio-pch.c b/drivers/gpio/gpio-pch.c
index bb2b66b..cdf5996 100644
--- a/drivers/gpio/gpio-pch.c
+++ b/drivers/gpio/gpio-pch.c
@@ -215,6 +215,7 @@
 	struct gpio_chip *gpio = &chip->gpio;
 
 	gpio->label = dev_name(chip->dev);
+	gpio->dev = chip->dev;
 	gpio->owner = THIS_MODULE;
 	gpio->direction_input = pch_gpio_direction_input;
 	gpio->get = pch_gpio_get;
diff --git a/drivers/gpio/gpio-pl061.c b/drivers/gpio/gpio-pl061.c
index b4b5da4..c1720de 100644
--- a/drivers/gpio/gpio-pl061.c
+++ b/drivers/gpio/gpio-pl061.c
@@ -48,12 +48,7 @@
 #endif
 
 struct pl061_gpio {
-	/* Each of the two spinlocks protects a different set of hardware
-	 * regiters and data structurs. This decouples the code of the IRQ from
-	 * the GPIO code. This also makes the case of a GPIO routine call from
-	 * the IRQ code simpler.
-	 */
-	spinlock_t		lock;		/* GPIO registers */
+	spinlock_t		lock;
 
 	void __iomem		*base;
 	int			irq_base;
@@ -216,39 +211,34 @@
 			       IRQ_GC_INIT_NESTED_LOCK, IRQ_NOREQUEST, 0);
 }
 
-static int pl061_probe(struct amba_device *dev, const struct amba_id *id)
+static int pl061_probe(struct amba_device *adev, const struct amba_id *id)
 {
-	struct pl061_platform_data *pdata;
+	struct device *dev = &adev->dev;
+	struct pl061_platform_data *pdata = dev->platform_data;
 	struct pl061_gpio *chip;
 	int ret, irq, i;
 
-	chip = kzalloc(sizeof(*chip), GFP_KERNEL);
+	chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
 	if (chip == NULL)
 		return -ENOMEM;
 
-	pdata = dev->dev.platform_data;
 	if (pdata) {
 		chip->gc.base = pdata->gpio_base;
 		chip->irq_base = pdata->irq_base;
-	} else if (dev->dev.of_node) {
+	} else if (adev->dev.of_node) {
 		chip->gc.base = -1;
 		chip->irq_base = 0;
-	} else {
-		ret = -ENODEV;
-		goto free_mem;
-	}
+	} else
+		return -ENODEV;
 
-	if (!request_mem_region(dev->res.start,
-				resource_size(&dev->res), "pl061")) {
-		ret = -EBUSY;
-		goto free_mem;
-	}
+	if (!devm_request_mem_region(dev, adev->res.start,
+				resource_size(&adev->res), "pl061"))
+		return -EBUSY;
 
-	chip->base = ioremap(dev->res.start, resource_size(&dev->res));
-	if (chip->base == NULL) {
-		ret = -ENOMEM;
-		goto release_region;
-	}
+	chip->base = devm_ioremap(dev, adev->res.start,
+				resource_size(&adev->res));
+	if (chip->base == NULL)
+		return -ENOMEM;
 
 	spin_lock_init(&chip->lock);
 
@@ -258,13 +248,13 @@
 	chip->gc.set = pl061_set_value;
 	chip->gc.to_irq = pl061_to_irq;
 	chip->gc.ngpio = PL061_GPIO_NR;
-	chip->gc.label = dev_name(&dev->dev);
-	chip->gc.dev = &dev->dev;
+	chip->gc.label = dev_name(dev);
+	chip->gc.dev = dev;
 	chip->gc.owner = THIS_MODULE;
 
 	ret = gpiochip_add(&chip->gc);
 	if (ret)
-		goto iounmap;
+		return ret;
 
 	/*
 	 * irq_chip support
@@ -276,11 +266,10 @@
 	pl061_init_gc(chip, chip->irq_base);
 
 	writeb(0, chip->base + GPIOIE); /* disable irqs */
-	irq = dev->irq[0];
-	if (irq < 0) {
-		ret = -ENODEV;
-		goto iounmap;
-	}
+	irq = adev->irq[0];
+	if (irq < 0)
+		return -ENODEV;
+
 	irq_set_chained_handler(irq, pl061_irq_handler);
 	irq_set_handler_data(irq, chip);
 
@@ -294,18 +283,9 @@
 		}
 	}
 
-	amba_set_drvdata(dev, chip);
+	amba_set_drvdata(adev, chip);
 
 	return 0;
-
-iounmap:
-	iounmap(chip->base);
-release_region:
-	release_mem_region(dev->res.start, resource_size(&dev->res));
-free_mem:
-	kfree(chip);
-
-	return ret;
 }
 
 #ifdef CONFIG_PM
diff --git a/drivers/gpio/gpio-spear-spics.c b/drivers/gpio/gpio-spear-spics.c
new file mode 100644
index 0000000..5f45fc4
--- /dev/null
+++ b/drivers/gpio/gpio-spear-spics.c
@@ -0,0 +1,217 @@
+/*
+ * SPEAr platform SPI chipselect abstraction over gpiolib
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Shiraz Hashim <shiraz.hashim@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+
+/* maximum chipselects */
+#define NUM_OF_GPIO	4
+
+/*
+ * Provision is available on some SPEAr SoCs to control ARM PL022 spi cs
+ * through system registers. This register lies outside spi (pl022)
+ * address space into system registers.
+ *
+ * It provides control for spi chip select lines so that any chipselect
+ * (out of 4 possible chipselects in pl022) can be made low to select
+ * the particular slave.
+ */
+
+/**
+ * struct spear_spics - represents spi chip select control
+ * @base: base address
+ * @perip_cfg: configuration register
+ * @sw_enable_bit: bit to enable s/w control over chipselects
+ * @cs_value_bit: bit to program high or low chipselect
+ * @cs_enable_mask: mask to select bits required to select chipselect
+ * @cs_enable_shift: bit pos of cs_enable_mask
+ * @use_count: use count of a spi controller cs lines
+ * @last_off: stores last offset caller of set_value()
+ * @chip: gpio_chip abstraction
+ */
+struct spear_spics {
+	void __iomem		*base;
+	u32			perip_cfg;
+	u32			sw_enable_bit;
+	u32			cs_value_bit;
+	u32			cs_enable_mask;
+	u32			cs_enable_shift;
+	unsigned long		use_count;
+	int			last_off;
+	struct gpio_chip	chip;
+};
+
+/* gpio framework specific routines */
+static int spics_get_value(struct gpio_chip *chip, unsigned offset)
+{
+	return -ENXIO;
+}
+
+static void spics_set_value(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct spear_spics *spics = container_of(chip, struct spear_spics,
+			chip);
+	u32 tmp;
+
+	/* select chip select from register */
+	tmp = readl_relaxed(spics->base + spics->perip_cfg);
+	if (spics->last_off != offset) {
+		spics->last_off = offset;
+		tmp &= ~(spics->cs_enable_mask << spics->cs_enable_shift);
+		tmp |= offset << spics->cs_enable_shift;
+	}
+
+	/* toggle chip select line */
+	tmp &= ~(0x1 << spics->cs_value_bit);
+	tmp |= value << spics->cs_value_bit;
+	writel_relaxed(tmp, spics->base + spics->perip_cfg);
+}
+
+static int spics_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	return -ENXIO;
+}
+
+static int spics_direction_output(struct gpio_chip *chip, unsigned offset,
+		int value)
+{
+	spics_set_value(chip, offset, value);
+	return 0;
+}
+
+static int spics_request(struct gpio_chip *chip, unsigned offset)
+{
+	struct spear_spics *spics = container_of(chip, struct spear_spics,
+			chip);
+	u32 tmp;
+
+	if (!spics->use_count++) {
+		tmp = readl_relaxed(spics->base + spics->perip_cfg);
+		tmp |= 0x1 << spics->sw_enable_bit;
+		tmp |= 0x1 << spics->cs_value_bit;
+		writel_relaxed(tmp, spics->base + spics->perip_cfg);
+	}
+
+	return 0;
+}
+
+static void spics_free(struct gpio_chip *chip, unsigned offset)
+{
+	struct spear_spics *spics = container_of(chip, struct spear_spics,
+			chip);
+	u32 tmp;
+
+	if (!--spics->use_count) {
+		tmp = readl_relaxed(spics->base + spics->perip_cfg);
+		tmp &= ~(0x1 << spics->sw_enable_bit);
+		writel_relaxed(tmp, spics->base + spics->perip_cfg);
+	}
+}
+
+static int spics_gpio_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct spear_spics *spics;
+	struct resource *res;
+	int ret;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "invalid IORESOURCE_MEM\n");
+		return -EBUSY;
+	}
+
+	spics = devm_kzalloc(&pdev->dev, sizeof(*spics), GFP_KERNEL);
+	if (!spics) {
+		dev_err(&pdev->dev, "memory allocation fail\n");
+		return -ENOMEM;
+	}
+
+	spics->base = devm_request_and_ioremap(&pdev->dev, res);
+	if (!spics->base) {
+		dev_err(&pdev->dev, "request and ioremap fail\n");
+		return -ENOMEM;
+	}
+
+	if (of_property_read_u32(np, "st-spics,peripcfg-reg",
+				&spics->perip_cfg))
+		goto err_dt_data;
+	if (of_property_read_u32(np, "st-spics,sw-enable-bit",
+				&spics->sw_enable_bit))
+		goto err_dt_data;
+	if (of_property_read_u32(np, "st-spics,cs-value-bit",
+				&spics->cs_value_bit))
+		goto err_dt_data;
+	if (of_property_read_u32(np, "st-spics,cs-enable-mask",
+				&spics->cs_enable_mask))
+		goto err_dt_data;
+	if (of_property_read_u32(np, "st-spics,cs-enable-shift",
+				&spics->cs_enable_shift))
+		goto err_dt_data;
+
+	platform_set_drvdata(pdev, spics);
+
+	spics->chip.ngpio = NUM_OF_GPIO;
+	spics->chip.base = -1;
+	spics->chip.request = spics_request;
+	spics->chip.free = spics_free;
+	spics->chip.direction_input = spics_direction_input;
+	spics->chip.direction_output = spics_direction_output;
+	spics->chip.get = spics_get_value;
+	spics->chip.set = spics_set_value;
+	spics->chip.label = dev_name(&pdev->dev);
+	spics->chip.dev = &pdev->dev;
+	spics->chip.owner = THIS_MODULE;
+	spics->last_off = -1;
+
+	ret = gpiochip_add(&spics->chip);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to add gpio chip\n");
+		return ret;
+	}
+
+	dev_info(&pdev->dev, "spear spics registered\n");
+	return 0;
+
+err_dt_data:
+	dev_err(&pdev->dev, "DT probe failed\n");
+	return -EINVAL;
+}
+
+static const struct of_device_id spics_gpio_of_match[] = {
+	{ .compatible = "st,spear-spics-gpio" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, spics_gpio_of_match);
+
+static struct platform_driver spics_gpio_driver = {
+	.probe = spics_gpio_probe,
+	.driver = {
+		.owner = THIS_MODULE,
+		.name = "spear-spics-gpio",
+		.of_match_table = spics_gpio_of_match,
+	},
+};
+
+static int __init spics_gpio_init(void)
+{
+	return platform_driver_register(&spics_gpio_driver);
+}
+subsys_initcall(spics_gpio_init);
+
+MODULE_AUTHOR("Shiraz Hashim <shiraz.hashim@st.com>");
+MODULE_DESCRIPTION("ST Microlectronics SPEAr SPI Chip Select Abstraction");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpio/gpio-stmpe.c b/drivers/gpio/gpio-stmpe.c
index 6dff78b..770476a 100644
--- a/drivers/gpio/gpio-stmpe.c
+++ b/drivers/gpio/gpio-stmpe.c
@@ -11,7 +11,9 @@
 #include <linux/slab.h>
 #include <linux/gpio.h>
 #include <linux/irq.h>
+#include <linux/irqdomain.h>
 #include <linux/interrupt.h>
+#include <linux/of.h>
 #include <linux/mfd/stmpe.h>
 
 /*
@@ -28,6 +30,7 @@
 	struct stmpe *stmpe;
 	struct device *dev;
 	struct mutex irq_lock;
+	struct irq_domain *domain;
 
 	int irq_base;
 	unsigned norequest_mask;
@@ -103,7 +106,7 @@
 {
 	struct stmpe_gpio *stmpe_gpio = to_stmpe_gpio(chip);
 
-	return stmpe_gpio->irq_base + offset;
+	return irq_create_mapping(stmpe_gpio->domain, offset);
 }
 
 static int stmpe_gpio_request(struct gpio_chip *chip, unsigned offset)
@@ -132,7 +135,7 @@
 static int stmpe_gpio_irq_set_type(struct irq_data *d, unsigned int type)
 {
 	struct stmpe_gpio *stmpe_gpio = irq_data_get_irq_chip_data(d);
-	int offset = d->irq - stmpe_gpio->irq_base;
+	int offset = d->hwirq;
 	int regoffset = offset / 8;
 	int mask = 1 << (offset % 8);
 
@@ -199,7 +202,7 @@
 static void stmpe_gpio_irq_mask(struct irq_data *d)
 {
 	struct stmpe_gpio *stmpe_gpio = irq_data_get_irq_chip_data(d);
-	int offset = d->irq - stmpe_gpio->irq_base;
+	int offset = d->hwirq;
 	int regoffset = offset / 8;
 	int mask = 1 << (offset % 8);
 
@@ -209,7 +212,7 @@
 static void stmpe_gpio_irq_unmask(struct irq_data *d)
 {
 	struct stmpe_gpio *stmpe_gpio = irq_data_get_irq_chip_data(d);
-	int offset = d->irq - stmpe_gpio->irq_base;
+	int offset = d->hwirq;
 	int regoffset = offset / 8;
 	int mask = 1 << (offset % 8);
 
@@ -251,8 +254,9 @@
 		while (stat) {
 			int bit = __ffs(stat);
 			int line = bank * 8 + bit;
+			int virq = irq_find_mapping(stmpe_gpio->domain, line);
 
-			handle_nested_irq(stmpe_gpio->irq_base + line);
+			handle_nested_irq(virq);
 			stat &= ~(1 << bit);
 		}
 
@@ -267,43 +271,61 @@
 	return IRQ_HANDLED;
 }
 
+int stmpe_gpio_irq_map(struct irq_domain *d, unsigned int virq,
+		       irq_hw_number_t hwirq)
+{
+	struct stmpe_gpio *stmpe_gpio = d->host_data;
+
+	if (!stmpe_gpio)
+		return -EINVAL;
+
+	irq_set_chip_data(hwirq, stmpe_gpio);
+	irq_set_chip_and_handler(hwirq, &stmpe_gpio_irq_chip,
+				 handle_simple_irq);
+	irq_set_nested_thread(hwirq, 1);
+#ifdef CONFIG_ARM
+	set_irq_flags(hwirq, IRQF_VALID);
+#else
+	irq_set_noprobe(hwirq);
+#endif
+
+	return 0;
+}
+
+void stmpe_gpio_irq_unmap(struct irq_domain *d, unsigned int virq)
+{
+#ifdef CONFIG_ARM
+	set_irq_flags(virq, 0);
+#endif
+	irq_set_chip_and_handler(virq, NULL, NULL);
+	irq_set_chip_data(virq, NULL);
+}
+
+static const struct irq_domain_ops stmpe_gpio_irq_simple_ops = {
+	.unmap = stmpe_gpio_irq_unmap,
+	.map = stmpe_gpio_irq_map,
+	.xlate = irq_domain_xlate_twocell,
+};
+
 static int stmpe_gpio_irq_init(struct stmpe_gpio *stmpe_gpio)
 {
 	int base = stmpe_gpio->irq_base;
-	int irq;
 
-	for (irq = base; irq < base + stmpe_gpio->chip.ngpio; irq++) {
-		irq_set_chip_data(irq, stmpe_gpio);
-		irq_set_chip_and_handler(irq, &stmpe_gpio_irq_chip,
-					 handle_simple_irq);
-		irq_set_nested_thread(irq, 1);
-#ifdef CONFIG_ARM
-		set_irq_flags(irq, IRQF_VALID);
-#else
-		irq_set_noprobe(irq);
-#endif
+	stmpe_gpio->domain = irq_domain_add_simple(NULL,
+				stmpe_gpio->chip.ngpio, base,
+				&stmpe_gpio_irq_simple_ops, stmpe_gpio);
+	if (!stmpe_gpio->domain) {
+		dev_err(stmpe_gpio->dev, "failed to create irqdomain\n");
+		return -ENOSYS;
 	}
 
 	return 0;
 }
 
-static void stmpe_gpio_irq_remove(struct stmpe_gpio *stmpe_gpio)
-{
-	int base = stmpe_gpio->irq_base;
-	int irq;
-
-	for (irq = base; irq < base + stmpe_gpio->chip.ngpio; irq++) {
-#ifdef CONFIG_ARM
-		set_irq_flags(irq, 0);
-#endif
-		irq_set_chip_and_handler(irq, NULL, NULL);
-		irq_set_chip_data(irq, NULL);
-	}
-}
-
 static int stmpe_gpio_probe(struct platform_device *pdev)
 {
 	struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent);
+	struct device_node *np = pdev->dev.of_node;
 	struct stmpe_gpio_platform_data *pdata;
 	struct stmpe_gpio *stmpe_gpio;
 	int ret;
@@ -321,13 +343,17 @@
 
 	stmpe_gpio->dev = &pdev->dev;
 	stmpe_gpio->stmpe = stmpe;
-	stmpe_gpio->norequest_mask = pdata ? pdata->norequest_mask : 0;
-
 	stmpe_gpio->chip = template_chip;
 	stmpe_gpio->chip.ngpio = stmpe->num_gpios;
 	stmpe_gpio->chip.dev = &pdev->dev;
 	stmpe_gpio->chip.base = pdata ? pdata->gpio_base : -1;
 
+	if (pdata)
+		stmpe_gpio->norequest_mask = pdata->norequest_mask;
+	else if (np)
+		of_property_read_u32(np, "st,norequest-mask",
+				&stmpe_gpio->norequest_mask);
+
 	if (irq >= 0)
 		stmpe_gpio->irq_base = stmpe->irq_base + STMPE_INT_GPIO(0);
 	else
@@ -348,7 +374,7 @@
 				IRQF_ONESHOT, "stmpe-gpio", stmpe_gpio);
 		if (ret) {
 			dev_err(&pdev->dev, "unable to get irq: %d\n", ret);
-			goto out_removeirq;
+			goto out_disable;
 		}
 	}
 
@@ -368,9 +394,6 @@
 out_freeirq:
 	if (irq >= 0)
 		free_irq(irq, stmpe_gpio);
-out_removeirq:
-	if (irq >= 0)
-		stmpe_gpio_irq_remove(stmpe_gpio);
 out_disable:
 	stmpe_disable(stmpe, STMPE_BLOCK_GPIO);
 out_free:
@@ -398,10 +421,9 @@
 
 	stmpe_disable(stmpe, STMPE_BLOCK_GPIO);
 
-	if (irq >= 0) {
+	if (irq >= 0)
 		free_irq(irq, stmpe_gpio);
-		stmpe_gpio_irq_remove(stmpe_gpio);
-	}
+
 	platform_set_drvdata(pdev, NULL);
 	kfree(stmpe_gpio);
 
diff --git a/drivers/gpio/gpio-tc3589x.c b/drivers/gpio/gpio-tc3589x.c
index 839f449..c0595bb 100644
--- a/drivers/gpio/gpio-tc3589x.c
+++ b/drivers/gpio/gpio-tc3589x.c
@@ -292,17 +292,15 @@
 {
 	int base = tc3589x_gpio->irq_base;
 
-	if (base) {
-		tc3589x_gpio->domain = irq_domain_add_legacy(
-			NULL, tc3589x_gpio->chip.ngpio, base,
-			0, &tc3589x_irq_ops, tc3589x_gpio);
-	}
-	else {
-		tc3589x_gpio->domain = irq_domain_add_linear(
-			np, tc3589x_gpio->chip.ngpio,
-			&tc3589x_irq_ops, tc3589x_gpio);
-	}
-
+	/*
+	 * If this results in a linear domain, irq_create_mapping() will
+	 * take care of allocating IRQ descriptors at runtime. When a base
+	 * is provided, the IRQ descriptors will be allocated when the
+	 * domain is instantiated.
+	 */
+	tc3589x_gpio->domain = irq_domain_add_simple(np,
+			tc3589x_gpio->chip.ngpio, base, &tc3589x_irq_ops,
+			tc3589x_gpio);
 	if (!tc3589x_gpio->domain) {
 		dev_err(tc3589x_gpio->dev, "Failed to create irqdomain\n");
 		return -ENOSYS;
diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c
index 4cd3e1d..63cb643 100644
--- a/drivers/gpio/gpio-tegra.c
+++ b/drivers/gpio/gpio-tegra.c
@@ -27,6 +27,7 @@
 #include <linux/module.h>
 #include <linux/irqdomain.h>
 #include <linux/pinctrl/consumer.h>
+#include <linux/pm.h>
 
 #include <asm/mach/irq.h>
 
@@ -64,7 +65,7 @@
 	int bank;
 	int irq;
 	spinlock_t lvl_lock[4];
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 	u32 cnf[4];
 	u32 out[4];
 	u32 oe[4];
@@ -109,20 +110,18 @@
 {
 	tegra_gpio_mask_write(GPIO_MSK_CNF(gpio), gpio, 1);
 }
-EXPORT_SYMBOL_GPL(tegra_gpio_enable);
 
 static void tegra_gpio_disable(int gpio)
 {
 	tegra_gpio_mask_write(GPIO_MSK_CNF(gpio), gpio, 0);
 }
-EXPORT_SYMBOL_GPL(tegra_gpio_disable);
 
-int tegra_gpio_request(struct gpio_chip *chip, unsigned offset)
+static int tegra_gpio_request(struct gpio_chip *chip, unsigned offset)
 {
 	return pinctrl_request_gpio(offset);
 }
 
-void tegra_gpio_free(struct gpio_chip *chip, unsigned offset)
+static void tegra_gpio_free(struct gpio_chip *chip, unsigned offset)
 {
 	pinctrl_free_gpio(offset);
 	tegra_gpio_disable(offset);
@@ -135,6 +134,11 @@
 
 static int tegra_gpio_get(struct gpio_chip *chip, unsigned offset)
 {
+	/* If gpio is in output mode then read from the out value */
+	if ((tegra_gpio_readl(GPIO_OE(offset)) >> GPIO_BIT(offset)) & 1)
+		return (tegra_gpio_readl(GPIO_OUT(offset)) >>
+				GPIO_BIT(offset)) & 0x1;
+
 	return (tegra_gpio_readl(GPIO_IN(offset)) >> GPIO_BIT(offset)) & 0x1;
 }
 
@@ -285,8 +289,8 @@
 
 }
 
-#ifdef CONFIG_PM
-void tegra_gpio_resume(void)
+#ifdef CONFIG_PM_SLEEP
+static int tegra_gpio_resume(struct device *dev)
 {
 	unsigned long flags;
 	int b;
@@ -308,9 +312,10 @@
 	}
 
 	local_irq_restore(flags);
+	return 0;
 }
 
-void tegra_gpio_suspend(void)
+static int tegra_gpio_suspend(struct device *dev)
 {
 	unsigned long flags;
 	int b;
@@ -330,6 +335,7 @@
 		}
 	}
 	local_irq_restore(flags);
+	return 0;
 }
 
 static int tegra_gpio_wake_enable(struct irq_data *d, unsigned int enable)
@@ -345,11 +351,15 @@
 	.irq_mask	= tegra_gpio_irq_mask,
 	.irq_unmask	= tegra_gpio_irq_unmask,
 	.irq_set_type	= tegra_gpio_irq_set_type,
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 	.irq_set_wake	= tegra_gpio_wake_enable,
 #endif
 };
 
+static const struct dev_pm_ops tegra_gpio_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(tegra_gpio_suspend, tegra_gpio_resume)
+};
+
 struct tegra_gpio_soc_config {
 	u32 bank_stride;
 	u32 upper_offset;
@@ -380,7 +390,6 @@
 {
 	const struct of_device_id *match;
 	struct tegra_gpio_soc_config *config;
-	int irq_base;
 	struct resource *res;
 	struct tegra_gpio_bank *bank;
 	int gpio;
@@ -417,14 +426,11 @@
 		return -ENODEV;
 	}
 
-	irq_base = irq_alloc_descs(-1, 0, tegra_gpio_chip.ngpio, 0);
-	if (irq_base < 0) {
-		dev_err(&pdev->dev, "Couldn't allocate IRQ numbers\n");
-		return -ENODEV;
-	}
-	irq_domain = irq_domain_add_legacy(pdev->dev.of_node,
-					   tegra_gpio_chip.ngpio, irq_base, 0,
+	irq_domain = irq_domain_add_linear(pdev->dev.of_node,
+					   tegra_gpio_chip.ngpio,
 					   &irq_domain_simple_ops, NULL);
+	if (!irq_domain)
+		return -ENODEV;
 
 	for (i = 0; i < tegra_gpio_bank_count; i++) {
 		res = platform_get_resource(pdev, IORESOURCE_IRQ, i);
@@ -464,7 +470,7 @@
 	gpiochip_add(&tegra_gpio_chip);
 
 	for (gpio = 0; gpio < tegra_gpio_chip.ngpio; gpio++) {
-		int irq = irq_find_mapping(irq_domain, gpio);
+		int irq = irq_create_mapping(irq_domain, gpio);
 		/* No validity check; all Tegra GPIOs are valid IRQs */
 
 		bank = &tegra_gpio_banks[GPIO_BANK(gpio)];
@@ -493,6 +499,7 @@
 	.driver		= {
 		.name	= "tegra-gpio",
 		.owner	= THIS_MODULE,
+		.pm	= &tegra_gpio_pm_ops,
 		.of_match_table = tegra_gpio_of_match,
 	},
 	.probe		= tegra_gpio_probe,
diff --git a/drivers/gpio/gpio-ts5500.c b/drivers/gpio/gpio-ts5500.c
new file mode 100644
index 0000000..0634cee
--- /dev/null
+++ b/drivers/gpio/gpio-ts5500.c
@@ -0,0 +1,466 @@
+/*
+ * Digital I/O driver for Technologic Systems TS-5500
+ *
+ * Copyright (c) 2012 Savoir-faire Linux Inc.
+ *	Vivien Didelot <vivien.didelot@savoirfairelinux.com>
+ *
+ * Technologic Systems platforms have pin blocks, exposing several Digital
+ * Input/Output lines (DIO). This driver aims to support single pin blocks.
+ * In that sense, the support is not limited to the TS-5500 blocks.
+ * Actually, the following platforms have DIO support:
+ *
+ * TS-5500:
+ *   Documentation: http://wiki.embeddedarm.com/wiki/TS-5500
+ *   Blocks: DIO1, DIO2 and LCD port.
+ *
+ * TS-5600:
+ *   Documentation: http://wiki.embeddedarm.com/wiki/TS-5600
+ *   Blocks: LCD port (identical to TS-5500 LCD).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/bitops.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_data/gpio-ts5500.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+/* List of supported Technologic Systems platforms DIO blocks */
+enum ts5500_blocks { TS5500_DIO1, TS5500_DIO2, TS5500_LCD, TS5600_LCD };
+
+struct ts5500_priv {
+	const struct ts5500_dio *pinout;
+	struct gpio_chip gpio_chip;
+	spinlock_t lock;
+	bool strap;
+	u8 hwirq;
+};
+
+/*
+ * Hex 7D is used to control several blocks (e.g. DIO2 and LCD port).
+ * This flag ensures that the region has been requested by this driver.
+ */
+static bool hex7d_reserved;
+
+/*
+ * This structure is used to describe capabilities of DIO lines,
+ * such as available directions and connected interrupt (if any).
+ */
+struct ts5500_dio {
+	const u8 value_addr;
+	const u8 value_mask;
+	const u8 control_addr;
+	const u8 control_mask;
+	const bool no_input;
+	const bool no_output;
+	const u8 irq;
+};
+
+#define TS5500_DIO_IN_OUT(vaddr, vbit, caddr, cbit)	\
+	{						\
+		.value_addr = vaddr,			\
+		.value_mask = BIT(vbit),		\
+		.control_addr = caddr,			\
+		.control_mask = BIT(cbit),		\
+	}
+
+#define TS5500_DIO_IN(addr, bit)		\
+	{					\
+		.value_addr = addr,		\
+		.value_mask = BIT(bit),		\
+		.no_output = true,		\
+	}
+
+#define TS5500_DIO_IN_IRQ(addr, bit, _irq)	\
+	{					\
+		.value_addr = addr,		\
+		.value_mask = BIT(bit),		\
+		.no_output = true,		\
+		.irq = _irq,			\
+	}
+
+#define TS5500_DIO_OUT(addr, bit)		\
+	{					\
+		.value_addr = addr,		\
+		.value_mask = BIT(bit),		\
+		.no_input = true,		\
+	}
+
+/*
+ * Input/Output DIO lines are programmed in groups of 4. Their values are
+ * available through 4 consecutive bits in a value port, whereas the direction
+ * of these 4 lines is driven by only 1 bit in a control port.
+ */
+#define TS5500_DIO_GROUP(vaddr, vbitfrom, caddr, cbit)		\
+	TS5500_DIO_IN_OUT(vaddr, vbitfrom + 0, caddr, cbit),	\
+	TS5500_DIO_IN_OUT(vaddr, vbitfrom + 1, caddr, cbit),	\
+	TS5500_DIO_IN_OUT(vaddr, vbitfrom + 2, caddr, cbit),	\
+	TS5500_DIO_IN_OUT(vaddr, vbitfrom + 3, caddr, cbit)
+
+/*
+ * TS-5500 DIO1 block
+ *
+ *  value    control  dir    hw
+ *  addr bit addr bit in out irq name     pin offset
+ *
+ *  0x7b  0  0x7a  0  x   x      DIO1_0   1   0
+ *  0x7b  1  0x7a  0  x   x      DIO1_1   3   1
+ *  0x7b  2  0x7a  0  x   x      DIO1_2   5   2
+ *  0x7b  3  0x7a  0  x   x      DIO1_3   7   3
+ *  0x7b  4  0x7a  1  x   x      DIO1_4   9   4
+ *  0x7b  5  0x7a  1  x   x      DIO1_5   11  5
+ *  0x7b  6  0x7a  1  x   x      DIO1_6   13  6
+ *  0x7b  7  0x7a  1  x   x      DIO1_7   15  7
+ *  0x7c  0  0x7a  5  x   x      DIO1_8   4   8
+ *  0x7c  1  0x7a  5  x   x      DIO1_9   6   9
+ *  0x7c  2  0x7a  5  x   x      DIO1_10  8   10
+ *  0x7c  3  0x7a  5  x   x      DIO1_11  10  11
+ *  0x7c  4           x          DIO1_12  12  12
+ *  0x7c  5           x      7   DIO1_13  14  13
+ */
+static const struct ts5500_dio ts5500_dio1[] = {
+	TS5500_DIO_GROUP(0x7b, 0, 0x7a, 0),
+	TS5500_DIO_GROUP(0x7b, 4, 0x7a, 1),
+	TS5500_DIO_GROUP(0x7c, 0, 0x7a, 5),
+	TS5500_DIO_IN(0x7c, 4),
+	TS5500_DIO_IN_IRQ(0x7c, 5, 7),
+};
+
+/*
+ * TS-5500 DIO2 block
+ *
+ *  value    control  dir    hw
+ *  addr bit addr bit in out irq name     pin offset
+ *
+ *  0x7e  0  0x7d  0  x   x      DIO2_0   1   0
+ *  0x7e  1  0x7d  0  x   x      DIO2_1   3   1
+ *  0x7e  2  0x7d  0  x   x      DIO2_2   5   2
+ *  0x7e  3  0x7d  0  x   x      DIO2_3   7   3
+ *  0x7e  4  0x7d  1  x   x      DIO2_4   9   4
+ *  0x7e  5  0x7d  1  x   x      DIO2_5   11  5
+ *  0x7e  6  0x7d  1  x   x      DIO2_6   13  6
+ *  0x7e  7  0x7d  1  x   x      DIO2_7   15  7
+ *  0x7f  0  0x7d  5  x   x      DIO2_8   4   8
+ *  0x7f  1  0x7d  5  x   x      DIO2_9   6   9
+ *  0x7f  2  0x7d  5  x   x      DIO2_10  8   10
+ *  0x7f  3  0x7d  5  x   x      DIO2_11  10  11
+ *  0x7f  4           x      6   DIO2_13  14  12
+ */
+static const struct ts5500_dio ts5500_dio2[] = {
+	TS5500_DIO_GROUP(0x7e, 0, 0x7d, 0),
+	TS5500_DIO_GROUP(0x7e, 4, 0x7d, 1),
+	TS5500_DIO_GROUP(0x7f, 0, 0x7d, 5),
+	TS5500_DIO_IN_IRQ(0x7f, 4, 6),
+};
+
+/*
+ * TS-5500 LCD port used as DIO block
+ * TS-5600 LCD port is identical
+ *
+ *  value    control  dir    hw
+ *  addr bit addr bit in out irq name    pin offset
+ *
+ *  0x72  0  0x7d  2  x   x      LCD_0   8   0
+ *  0x72  1  0x7d  2  x   x      LCD_1   7   1
+ *  0x72  2  0x7d  2  x   x      LCD_2   10  2
+ *  0x72  3  0x7d  2  x   x      LCD_3   9   3
+ *  0x72  4  0x7d  3  x   x      LCD_4   12  4
+ *  0x72  5  0x7d  3  x   x      LCD_5   11  5
+ *  0x72  6  0x7d  3  x   x      LCD_6   14  6
+ *  0x72  7  0x7d  3  x   x      LCD_7   13  7
+ *  0x73  0               x      LCD_EN  5   8
+ *  0x73  6           x          LCD_WR  6   9
+ *  0x73  7           x      1   LCD_RS  3   10
+ */
+static const struct ts5500_dio ts5500_lcd[] = {
+	TS5500_DIO_GROUP(0x72, 0, 0x7d, 2),
+	TS5500_DIO_GROUP(0x72, 4, 0x7d, 3),
+	TS5500_DIO_OUT(0x73, 0),
+	TS5500_DIO_IN(0x73, 6),
+	TS5500_DIO_IN_IRQ(0x73, 7, 1),
+};
+
+static inline struct ts5500_priv *ts5500_gc_to_priv(struct gpio_chip *chip)
+{
+	return container_of(chip, struct ts5500_priv, gpio_chip);
+}
+
+static inline void ts5500_set_mask(u8 mask, u8 addr)
+{
+	u8 val = inb(addr);
+	val |= mask;
+	outb(val, addr);
+}
+
+static inline void ts5500_clear_mask(u8 mask, u8 addr)
+{
+	u8 val = inb(addr);
+	val &= ~mask;
+	outb(val, addr);
+}
+
+static int ts5500_gpio_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct ts5500_priv *priv = ts5500_gc_to_priv(chip);
+	const struct ts5500_dio line = priv->pinout[offset];
+	unsigned long flags;
+
+	if (line.no_input)
+		return -ENXIO;
+
+	if (line.no_output)
+		return 0;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	ts5500_clear_mask(line.control_mask, line.control_addr);
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	return 0;
+}
+
+static int ts5500_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct ts5500_priv *priv = ts5500_gc_to_priv(chip);
+	const struct ts5500_dio line = priv->pinout[offset];
+
+	return !!(inb(line.value_addr) & line.value_mask);
+}
+
+static int ts5500_gpio_output(struct gpio_chip *chip, unsigned offset, int val)
+{
+	struct ts5500_priv *priv = ts5500_gc_to_priv(chip);
+	const struct ts5500_dio line = priv->pinout[offset];
+	unsigned long flags;
+
+	if (line.no_output)
+		return -ENXIO;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (!line.no_input)
+		ts5500_set_mask(line.control_mask, line.control_addr);
+
+	if (val)
+		ts5500_set_mask(line.value_mask, line.value_addr);
+	else
+		ts5500_clear_mask(line.value_mask, line.value_addr);
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	return 0;
+}
+
+static void ts5500_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
+{
+	struct ts5500_priv *priv = ts5500_gc_to_priv(chip);
+	const struct ts5500_dio line = priv->pinout[offset];
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (val)
+		ts5500_set_mask(line.value_mask, line.value_addr);
+	else
+		ts5500_clear_mask(line.value_mask, line.value_addr);
+	spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static int ts5500_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	struct ts5500_priv *priv = ts5500_gc_to_priv(chip);
+	const struct ts5500_dio *block = priv->pinout;
+	const struct ts5500_dio line = block[offset];
+
+	/* Only one pin is connected to an interrupt */
+	if (line.irq)
+		return line.irq;
+
+	/* As this pin is input-only, we may strap it to another in/out pin */
+	if (priv->strap)
+		return priv->hwirq;
+
+	return -ENXIO;
+}
+
+static int ts5500_enable_irq(struct ts5500_priv *priv)
+{
+	int ret = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (priv->hwirq == 7)
+		ts5500_set_mask(BIT(7), 0x7a); /* DIO1_13 on IRQ7 */
+	else if (priv->hwirq == 6)
+		ts5500_set_mask(BIT(7), 0x7d); /* DIO2_13 on IRQ6 */
+	else if (priv->hwirq == 1)
+		ts5500_set_mask(BIT(6), 0x7d); /* LCD_RS on IRQ1 */
+	else
+		ret = -EINVAL;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	return ret;
+}
+
+static void ts5500_disable_irq(struct ts5500_priv *priv)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (priv->hwirq == 7)
+		ts5500_clear_mask(BIT(7), 0x7a); /* DIO1_13 on IRQ7 */
+	else if (priv->hwirq == 6)
+		ts5500_clear_mask(BIT(7), 0x7d); /* DIO2_13 on IRQ6 */
+	else if (priv->hwirq == 1)
+		ts5500_clear_mask(BIT(6), 0x7d); /* LCD_RS on IRQ1 */
+	else
+		dev_err(priv->gpio_chip.dev, "invalid hwirq %d\n", priv->hwirq);
+	spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static int __devinit ts5500_dio_probe(struct platform_device *pdev)
+{
+	enum ts5500_blocks block = platform_get_device_id(pdev)->driver_data;
+	struct ts5500_dio_platform_data *pdata = pdev->dev.platform_data;
+	struct device *dev = &pdev->dev;
+	const char *name = dev_name(dev);
+	struct ts5500_priv *priv;
+	struct resource *res;
+	unsigned long flags;
+	int ret;
+
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!res) {
+		dev_err(dev, "missing IRQ resource\n");
+		return -EINVAL;
+	}
+
+	priv = devm_kzalloc(dev, sizeof(struct ts5500_priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, priv);
+	priv->hwirq = res->start;
+	spin_lock_init(&priv->lock);
+
+	priv->gpio_chip.owner = THIS_MODULE;
+	priv->gpio_chip.label = name;
+	priv->gpio_chip.dev = dev;
+	priv->gpio_chip.direction_input = ts5500_gpio_input;
+	priv->gpio_chip.direction_output = ts5500_gpio_output;
+	priv->gpio_chip.get = ts5500_gpio_get;
+	priv->gpio_chip.set = ts5500_gpio_set;
+	priv->gpio_chip.to_irq = ts5500_gpio_to_irq;
+	priv->gpio_chip.base = -1;
+	if (pdata) {
+		priv->gpio_chip.base = pdata->base;
+		priv->strap = pdata->strap;
+	}
+
+	switch (block) {
+	case TS5500_DIO1:
+		priv->pinout = ts5500_dio1;
+		priv->gpio_chip.ngpio = ARRAY_SIZE(ts5500_dio1);
+
+		if (!devm_request_region(dev, 0x7a, 3, name)) {
+			dev_err(dev, "failed to request %s ports\n", name);
+			return -EBUSY;
+		}
+		break;
+	case TS5500_DIO2:
+		priv->pinout = ts5500_dio2;
+		priv->gpio_chip.ngpio = ARRAY_SIZE(ts5500_dio2);
+
+		if (!devm_request_region(dev, 0x7e, 2, name)) {
+			dev_err(dev, "failed to request %s ports\n", name);
+			return -EBUSY;
+		}
+
+		if (hex7d_reserved)
+			break;
+
+		if (!devm_request_region(dev, 0x7d, 1, name)) {
+			dev_err(dev, "failed to request %s 7D\n", name);
+			return -EBUSY;
+		}
+
+		hex7d_reserved = true;
+		break;
+	case TS5500_LCD:
+	case TS5600_LCD:
+		priv->pinout = ts5500_lcd;
+		priv->gpio_chip.ngpio = ARRAY_SIZE(ts5500_lcd);
+
+		if (!devm_request_region(dev, 0x72, 2, name)) {
+			dev_err(dev, "failed to request %s ports\n", name);
+			return -EBUSY;
+		}
+
+		if (!hex7d_reserved) {
+			if (!devm_request_region(dev, 0x7d, 1, name)) {
+				dev_err(dev, "failed to request %s 7D\n", name);
+				return -EBUSY;
+			}
+
+			hex7d_reserved = true;
+		}
+
+		/* Ensure usage of LCD port as DIO */
+		spin_lock_irqsave(&priv->lock, flags);
+		ts5500_clear_mask(BIT(4), 0x7d);
+		spin_unlock_irqrestore(&priv->lock, flags);
+		break;
+	}
+
+	ret = gpiochip_add(&priv->gpio_chip);
+	if (ret) {
+		dev_err(dev, "failed to register the gpio chip\n");
+		return ret;
+	}
+
+	ret = ts5500_enable_irq(priv);
+	if (ret) {
+		dev_err(dev, "invalid interrupt %d\n", priv->hwirq);
+		goto cleanup;
+	}
+
+	return 0;
+cleanup:
+	if (gpiochip_remove(&priv->gpio_chip))
+		dev_err(dev, "failed to remove gpio chip\n");
+	return ret;
+}
+
+static int __devexit ts5500_dio_remove(struct platform_device *pdev)
+{
+	struct ts5500_priv *priv = platform_get_drvdata(pdev);
+
+	ts5500_disable_irq(priv);
+	return gpiochip_remove(&priv->gpio_chip);
+}
+
+static struct platform_device_id ts5500_dio_ids[] = {
+	{ "ts5500-dio1", TS5500_DIO1 },
+	{ "ts5500-dio2", TS5500_DIO2 },
+	{ "ts5500-dio-lcd", TS5500_LCD },
+	{ "ts5600-dio-lcd", TS5600_LCD },
+	{ }
+};
+MODULE_DEVICE_TABLE(platform, ts5500_dio_ids);
+
+static struct platform_driver ts5500_dio_driver = {
+	.driver = {
+		.name = "ts5500-dio",
+		.owner = THIS_MODULE,
+	},
+	.probe = ts5500_dio_probe,
+	.remove = __devexit_p(ts5500_dio_remove),
+	.id_table = ts5500_dio_ids,
+};
+
+module_platform_driver(ts5500_dio_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Savoir-faire Linux Inc. <kernel@savoirfairelinux.com>");
+MODULE_DESCRIPTION("Technologic Systems TS-5500 Digital I/O driver");
diff --git a/drivers/gpio/gpio-twl4030.c b/drivers/gpio/gpio-twl4030.c
index 8beae66..00329f2 100644
--- a/drivers/gpio/gpio-twl4030.c
+++ b/drivers/gpio/gpio-twl4030.c
@@ -88,11 +88,15 @@
 /*----------------------------------------------------------------------*/
 
 /*
- * LED register offsets (use TWL4030_MODULE_{LED,PWMA,PWMB}))
+ * LED register offsets from TWL_MODULE_LED base
  * PWMs A and B are dedicated to LEDs A and B, respectively.
  */
 
-#define TWL4030_LED_LEDEN	0x0
+#define TWL4030_LED_LEDEN_REG	0x00
+#define TWL4030_PWMAON_REG	0x01
+#define TWL4030_PWMAOFF_REG	0x02
+#define TWL4030_PWMBON_REG	0x03
+#define TWL4030_PWMBOFF_REG	0x04
 
 /* LEDEN bits */
 #define LEDEN_LEDAON		BIT(0)
@@ -104,9 +108,6 @@
 #define LEDEN_PWM_LENGTHA	BIT(6)
 #define LEDEN_PWM_LENGTHB	BIT(7)
 
-#define TWL4030_PWMx_PWMxON	0x0
-#define TWL4030_PWMx_PWMxOFF	0x1
-
 #define PWMxON_LENGTH		BIT(7)
 
 /*----------------------------------------------------------------------*/
@@ -145,7 +146,7 @@
 	else
 		cached_leden |= mask;
 	status = twl_i2c_write_u8(TWL4030_MODULE_LED, cached_leden,
-			TWL4030_LED_LEDEN);
+				  TWL4030_LED_LEDEN_REG);
 	mutex_unlock(&gpio_lock);
 }
 
@@ -216,33 +217,33 @@
 	if (offset >= TWL4030_GPIO_MAX) {
 		u8	ledclr_mask = LEDEN_LEDAON | LEDEN_LEDAEXT
 				| LEDEN_LEDAPWM | LEDEN_PWM_LENGTHA;
-		u8	module = TWL4030_MODULE_PWMA;
+		u8	reg = TWL4030_PWMAON_REG;
 
 		offset -= TWL4030_GPIO_MAX;
 		if (offset) {
 			ledclr_mask <<= 1;
-			module = TWL4030_MODULE_PWMB;
+			reg = TWL4030_PWMBON_REG;
 		}
 
 		/* initialize PWM to always-drive */
-		status = twl_i2c_write_u8(module, 0x7f,
-				TWL4030_PWMx_PWMxOFF);
+		/* Configure PWM OFF register first */
+		status = twl_i2c_write_u8(TWL4030_MODULE_LED, 0x7f, reg + 1);
 		if (status < 0)
 			goto done;
-		status = twl_i2c_write_u8(module, 0x7f,
-				TWL4030_PWMx_PWMxON);
+
+		/* Followed by PWM ON register */
+		status = twl_i2c_write_u8(TWL4030_MODULE_LED, 0x7f, reg);
 		if (status < 0)
 			goto done;
 
 		/* init LED to not-driven (high) */
-		module = TWL4030_MODULE_LED;
-		status = twl_i2c_read_u8(module, &cached_leden,
-				TWL4030_LED_LEDEN);
+		status = twl_i2c_read_u8(TWL4030_MODULE_LED, &cached_leden,
+					 TWL4030_LED_LEDEN_REG);
 		if (status < 0)
 			goto done;
 		cached_leden &= ~ledclr_mask;
-		status = twl_i2c_write_u8(module, cached_leden,
-				TWL4030_LED_LEDEN);
+		status = twl_i2c_write_u8(TWL4030_MODULE_LED, cached_leden,
+					  TWL4030_LED_LEDEN_REG);
 		if (status < 0)
 			goto done;
 
diff --git a/drivers/gpio/gpio-vt8500.c b/drivers/gpio/gpio-vt8500.c
index 579f264..b53320a 100644
--- a/drivers/gpio/gpio-vt8500.c
+++ b/drivers/gpio/gpio-vt8500.c
@@ -96,6 +96,7 @@
 		VT8500_BANK(0x5C, 0x84, 0xAC, 0xD4, 12),
 		VT8500_BANK(0x60, 0x88, 0xB0, 0xD8, 16),
 		VT8500_BANK(0x64, 0x8C, 0xB4, 0xDC, 22),
+		VT8500_BANK(0x500, 0x504, 0x508, 0x50C, 6),
 	},
 };
 
@@ -115,6 +116,7 @@
 		VT8500_BANK(0x58, 0x98, 0xD8, 0x18, 32),
 		VT8500_BANK(0x5C, 0x9C, 0xDC, 0x1C, 32),
 		VT8500_BANK(0x7C, 0xBC, 0xFC, 0x3C, 32),
+		VT8500_BANK(0x500, 0x504, 0x508, 0x50C, 6),
 	},
 };
 
diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c
new file mode 100644
index 0000000..cbad6e9
--- /dev/null
+++ b/drivers/gpio/gpiolib-acpi.c
@@ -0,0 +1,54 @@
+/*
+ * ACPI helpers for GPIO API
+ *
+ * Copyright (C) 2012, Intel Corporation
+ * Authors: Mathias Nyman <mathias.nyman@linux.intel.com>
+ *          Mika Westerberg <mika.westerberg@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/errno.h>
+#include <linux/gpio.h>
+#include <linux/export.h>
+#include <linux/acpi_gpio.h>
+#include <linux/acpi.h>
+
+static int acpi_gpiochip_find(struct gpio_chip *gc, void *data)
+{
+	if (!gc->dev)
+		return false;
+
+	return ACPI_HANDLE(gc->dev) == data;
+}
+
+/**
+ * acpi_get_gpio() - Translate ACPI GPIO pin to GPIO number usable with GPIO API
+ * @path:	ACPI GPIO controller full path name, (e.g. "\\_SB.GPO1")
+ * @pin:	ACPI GPIO pin number (0-based, controller-relative)
+ *
+ * Returns GPIO number to use with Linux generic GPIO API, or errno error value
+ */
+
+int acpi_get_gpio(char *path, int pin)
+{
+	struct gpio_chip *chip;
+	acpi_handle handle;
+	acpi_status status;
+
+	status = acpi_get_handle(NULL, path, &handle);
+	if (ACPI_FAILURE(status))
+		return -ENODEV;
+
+	chip = gpiochip_find(handle, acpi_gpiochip_find);
+	if (!chip)
+		return -ENODEV;
+
+	if (!gpio_is_valid(chip->base + pin))
+		return -EINVAL;
+
+	return chip->base + pin;
+}
+EXPORT_SYMBOL_GPL(acpi_get_gpio);
diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c
index f1a4599..d542a14 100644
--- a/drivers/gpio/gpiolib-of.c
+++ b/drivers/gpio/gpiolib-of.c
@@ -19,6 +19,7 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_gpio.h>
+#include <linux/pinctrl/pinctrl.h>
 #include <linux/slab.h>
 
 /* Private data structure for of_gpiochip_find_and_xlate */
@@ -216,6 +217,54 @@
 }
 EXPORT_SYMBOL(of_mm_gpiochip_add);
 
+#ifdef CONFIG_PINCTRL
+static void of_gpiochip_add_pin_range(struct gpio_chip *chip)
+{
+	struct device_node *np = chip->of_node;
+	struct of_phandle_args pinspec;
+	struct pinctrl_dev *pctldev;
+	int index = 0, ret;
+
+	if (!np)
+		return;
+
+	do {
+		ret = of_parse_phandle_with_args(np, "gpio-ranges",
+				"#gpio-range-cells", index, &pinspec);
+		if (ret)
+			break;
+
+		pctldev = of_pinctrl_get(pinspec.np);
+		if (!pctldev)
+			break;
+
+		/*
+		 * This assumes that the n GPIO pins are consecutive in the
+		 * GPIO number space, and that the pins are also consecutive
+		 * in their local number space. Currently it is not possible
+		 * to add different ranges for one and the same GPIO chip,
+		 * as the code assumes that we have one consecutive range
+		 * on both, mapping 1-to-1.
+		 *
+		 * TODO: make the OF bindings handle multiple sparse ranges
+		 * on the same GPIO chip.
+		 */
+		ret = gpiochip_add_pin_range(chip,
+					     pinctrl_dev_get_name(pctldev),
+					     0, /* offset in gpiochip */
+					     pinspec.args[0],
+					     pinspec.args[1]);
+
+		if (ret)
+			break;
+
+	} while (index++);
+}
+
+#else
+static void of_gpiochip_add_pin_range(struct gpio_chip *chip) {}
+#endif
+
 void of_gpiochip_add(struct gpio_chip *chip)
 {
 	if ((!chip->of_node) && (chip->dev))
@@ -229,11 +278,14 @@
 		chip->of_xlate = of_gpio_simple_xlate;
 	}
 
+	of_gpiochip_add_pin_range(chip);
 	of_node_get(chip->of_node);
 }
 
 void of_gpiochip_remove(struct gpio_chip *chip)
 {
+	gpiochip_remove_pin_ranges(chip);
+
 	if (chip->of_node)
 		of_node_put(chip->of_node);
 }
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 1c8d9e3..199fca1 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -191,6 +191,32 @@
 	return ret;
 }
 
+/* caller ensures gpio is valid and requested, chip->get_direction may sleep  */
+static int gpio_get_direction(unsigned gpio)
+{
+	struct gpio_chip	*chip;
+	struct gpio_desc	*desc = &gpio_desc[gpio];
+	int			status = -EINVAL;
+
+	chip = gpio_to_chip(gpio);
+	gpio -= chip->base;
+
+	if (!chip->get_direction)
+		return status;
+
+	status = chip->get_direction(chip, gpio);
+	if (status > 0) {
+		/* GPIOF_DIR_IN, or other positive */
+		status = 1;
+		clear_bit(FLAG_IS_OUT, &desc->flags);
+	}
+	if (status == 0) {
+		/* GPIOF_DIR_OUT */
+		set_bit(FLAG_IS_OUT, &desc->flags);
+	}
+	return status;
+}
+
 #ifdef CONFIG_GPIO_SYSFS
 
 /* lock protects against unexport_gpio() being called while
@@ -223,6 +249,7 @@
 		struct device_attribute *attr, char *buf)
 {
 	const struct gpio_desc	*desc = dev_get_drvdata(dev);
+	unsigned		gpio = desc - gpio_desc;
 	ssize_t			status;
 
 	mutex_lock(&sysfs_lock);
@@ -230,6 +257,7 @@
 	if (!test_bit(FLAG_EXPORT, &desc->flags))
 		status = -EIO;
 	else
+		gpio_get_direction(gpio);
 		status = sprintf(buf, "%s\n",
 			test_bit(FLAG_IS_OUT, &desc->flags)
 				? "out" : "in");
@@ -704,8 +732,9 @@
 {
 	unsigned long		flags;
 	struct gpio_desc	*desc;
-	int			status = -EINVAL;
+	int			status;
 	const char		*ioname = NULL;
+	struct device		*dev;
 
 	/* can't export until sysfs is available ... */
 	if (!gpio_class.p) {
@@ -713,59 +742,66 @@
 		return -ENOENT;
 	}
 
-	if (!gpio_is_valid(gpio))
-		goto done;
+	if (!gpio_is_valid(gpio)) {
+		pr_debug("%s: gpio %d is not valid\n", __func__, gpio);
+		return -EINVAL;
+	}
 
 	mutex_lock(&sysfs_lock);
 
 	spin_lock_irqsave(&gpio_lock, flags);
 	desc = &gpio_desc[gpio];
-	if (test_bit(FLAG_REQUESTED, &desc->flags)
-			&& !test_bit(FLAG_EXPORT, &desc->flags)) {
-		status = 0;
-		if (!desc->chip->direction_input
-				|| !desc->chip->direction_output)
-			direction_may_change = false;
+	if (!test_bit(FLAG_REQUESTED, &desc->flags) ||
+	     test_bit(FLAG_EXPORT, &desc->flags)) {
+		spin_unlock_irqrestore(&gpio_lock, flags);
+		pr_debug("%s: gpio %d unavailable (requested=%d, exported=%d)\n",
+				__func__, gpio,
+				test_bit(FLAG_REQUESTED, &desc->flags),
+				test_bit(FLAG_EXPORT, &desc->flags));
+		status = -EPERM;
+		goto fail_unlock;
 	}
+
+	if (!desc->chip->direction_input || !desc->chip->direction_output)
+		direction_may_change = false;
 	spin_unlock_irqrestore(&gpio_lock, flags);
 
 	if (desc->chip->names && desc->chip->names[gpio - desc->chip->base])
 		ioname = desc->chip->names[gpio - desc->chip->base];
 
-	if (status == 0) {
-		struct device	*dev;
-
-		dev = device_create(&gpio_class, desc->chip->dev, MKDEV(0, 0),
-				desc, ioname ? ioname : "gpio%u", gpio);
-		if (!IS_ERR(dev)) {
-			status = sysfs_create_group(&dev->kobj,
-						&gpio_attr_group);
-
-			if (!status && direction_may_change)
-				status = device_create_file(dev,
-						&dev_attr_direction);
-
-			if (!status && gpio_to_irq(gpio) >= 0
-					&& (direction_may_change
-						|| !test_bit(FLAG_IS_OUT,
-							&desc->flags)))
-				status = device_create_file(dev,
-						&dev_attr_edge);
-
-			if (status != 0)
-				device_unregister(dev);
-		} else
-			status = PTR_ERR(dev);
-		if (status == 0)
-			set_bit(FLAG_EXPORT, &desc->flags);
+	dev = device_create(&gpio_class, desc->chip->dev, MKDEV(0, 0),
+			    desc, ioname ? ioname : "gpio%u", gpio);
+	if (IS_ERR(dev)) {
+		status = PTR_ERR(dev);
+		goto fail_unlock;
 	}
 
-	mutex_unlock(&sysfs_lock);
-
-done:
+	status = sysfs_create_group(&dev->kobj, &gpio_attr_group);
 	if (status)
-		pr_debug("%s: gpio%d status %d\n", __func__, gpio, status);
+		goto fail_unregister_device;
 
+	if (direction_may_change) {
+		status = device_create_file(dev, &dev_attr_direction);
+		if (status)
+			goto fail_unregister_device;
+	}
+
+	if (gpio_to_irq(gpio) >= 0 && (direction_may_change ||
+				       !test_bit(FLAG_IS_OUT, &desc->flags))) {
+		status = device_create_file(dev, &dev_attr_edge);
+		if (status)
+			goto fail_unregister_device;
+	}
+
+	set_bit(FLAG_EXPORT, &desc->flags);
+	mutex_unlock(&sysfs_lock);
+	return 0;
+
+fail_unregister_device:
+	device_unregister(dev);
+fail_unlock:
+	mutex_unlock(&sysfs_lock);
+	pr_debug("%s: gpio%d status %d\n", __func__, gpio, status);
 	return status;
 }
 EXPORT_SYMBOL_GPL(gpio_export);
@@ -1075,6 +1111,7 @@
 			 * inputs (often with pullups enabled) so power
 			 * usage is minimized.  Linux code should set the
 			 * gpio direction first thing; but until it does,
+			 * and in case chip->get_direction is not set,
 			 * we may expose the wrong direction in sysfs.
 			 */
 			gpio_desc[id].flags = !chip->direction_input
@@ -1083,6 +1120,10 @@
 		}
 	}
 
+#ifdef CONFIG_PINCTRL
+	INIT_LIST_HEAD(&chip->pin_ranges);
+#endif
+
 	of_gpiochip_add(chip);
 
 unlock:
@@ -1123,6 +1164,7 @@
 
 	spin_lock_irqsave(&gpio_lock, flags);
 
+	gpiochip_remove_pin_ranges(chip);
 	of_gpiochip_remove(chip);
 
 	for (id = chip->base; id < chip->base + chip->ngpio; id++) {
@@ -1180,6 +1222,77 @@
 }
 EXPORT_SYMBOL_GPL(gpiochip_find);
 
+#ifdef CONFIG_PINCTRL
+
+/**
+ * gpiochip_add_pin_range() - add a range for GPIO <-> pin mapping
+ * @chip: the gpiochip to add the range for
+ * @pinctrl_name: the dev_name() of the pin controller to map to
+ * @gpio_offset: the start offset in the current gpio_chip number space
+ * @pin_offset: the start offset in the pin controller number space
+ * @npins: the number of pins from the offset of each pin space (GPIO and
+ *	pin controller) to accumulate in this range
+ */
+int gpiochip_add_pin_range(struct gpio_chip *chip, const char *pinctl_name,
+			   unsigned int gpio_offset, unsigned int pin_offset,
+			   unsigned int npins)
+{
+	struct gpio_pin_range *pin_range;
+	int ret;
+
+	pin_range = kzalloc(sizeof(*pin_range), GFP_KERNEL);
+	if (!pin_range) {
+		pr_err("%s: GPIO chip: failed to allocate pin ranges\n",
+				chip->label);
+		return -ENOMEM;
+	}
+
+	/* Use local offset as range ID */
+	pin_range->range.id = gpio_offset;
+	pin_range->range.gc = chip;
+	pin_range->range.name = chip->label;
+	pin_range->range.base = chip->base + gpio_offset;
+	pin_range->range.pin_base = pin_offset;
+	pin_range->range.npins = npins;
+	pin_range->pctldev = pinctrl_find_and_add_gpio_range(pinctl_name,
+			&pin_range->range);
+	if (IS_ERR(pin_range->pctldev)) {
+		ret = PTR_ERR(pin_range->pctldev);
+		pr_err("%s: GPIO chip: could not create pin range\n",
+		       chip->label);
+		kfree(pin_range);
+		return ret;
+	}
+	pr_debug("GPIO chip %s: created GPIO range %d->%d ==> %s PIN %d->%d\n",
+		 chip->label, gpio_offset, gpio_offset + npins - 1,
+		 pinctl_name,
+		 pin_offset, pin_offset + npins - 1);
+
+	list_add_tail(&pin_range->node, &chip->pin_ranges);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(gpiochip_add_pin_range);
+
+/**
+ * gpiochip_remove_pin_ranges() - remove all the GPIO <-> pin mappings
+ * @chip: the chip to remove all the mappings for
+ */
+void gpiochip_remove_pin_ranges(struct gpio_chip *chip)
+{
+	struct gpio_pin_range *pin_range, *tmp;
+
+	list_for_each_entry_safe(pin_range, tmp, &chip->pin_ranges, node) {
+		list_del(&pin_range->node);
+		pinctrl_remove_gpio_range(pin_range->pctldev,
+				&pin_range->range);
+		kfree(pin_range);
+	}
+}
+EXPORT_SYMBOL_GPL(gpiochip_remove_pin_ranges);
+
+#endif /* CONFIG_PINCTRL */
+
 /* These "optional" allocation calls help prevent drivers from stomping
  * on each other, and help provide better diagnostics in debugfs.
  * They're called even less than the "set direction" calls.
@@ -1228,9 +1341,15 @@
 			desc_set_label(desc, NULL);
 			module_put(chip->owner);
 			clear_bit(FLAG_REQUESTED, &desc->flags);
+			goto done;
 		}
 	}
-
+	if (chip->get_direction) {
+		/* chip->get_direction may sleep */
+		spin_unlock_irqrestore(&gpio_lock, flags);
+		gpio_get_direction(gpio);
+		spin_lock_irqsave(&gpio_lock, flags);
+	}
 done:
 	if (status)
 		pr_debug("gpio_request: gpio-%d (%s) status %d\n",
@@ -1766,6 +1885,7 @@
 		if (!test_bit(FLAG_REQUESTED, &gdesc->flags))
 			continue;
 
+		gpio_get_direction(gpio);
 		is_out = test_bit(FLAG_IS_OUT, &gdesc->flags);
 		seq_printf(s, " gpio-%-3d (%-20.20s) %s %s",
 			gpio, gdesc->label,
diff --git a/drivers/gpu/drm/exynos/exynos_drm_encoder.c b/drivers/gpu/drm/exynos/exynos_drm_encoder.c
index 241ad1e..f2df06c 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_encoder.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_encoder.c
@@ -226,6 +226,12 @@
 	 * already updated or not by exynos_drm_encoder_dpms function.
 	 */
 	exynos_encoder->updated = true;
+
+	/*
+	 * In case of setcrtc, there is no way to update encoder's dpms
+	 * so update it here.
+	 */
+	exynos_encoder->dpms = DRM_MODE_DPMS_ON;
 }
 
 static void exynos_drm_encoder_disable(struct drm_encoder *encoder)
@@ -507,6 +513,6 @@
 	 * because the setting for disabling the overlay will be updated
 	 * at vsync.
 	 */
-	if (overlay_ops->wait_for_vblank)
+	if (overlay_ops && overlay_ops->wait_for_vblank)
 		overlay_ops->wait_for_vblank(manager->dev);
 }
diff --git a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c
index 67eb6ba..e7466c4 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c
@@ -87,7 +87,8 @@
 
 	dev->mode_config.fb_base = (resource_size_t)buffer->dma_addr;
 	fbi->screen_base = buffer->kvaddr + offset;
-	fbi->fix.smem_start = (unsigned long)(buffer->dma_addr + offset);
+	fbi->fix.smem_start = (unsigned long)(page_to_phys(buffer->pages[0]) +
+				offset);
 	fbi->screen_size = size;
 	fbi->fix.smem_len = size;
 
diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c
index 130a2b5..e08478f 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c
@@ -61,11 +61,11 @@
 	unsigned int timing_base;
 };
 
-struct fimd_driver_data exynos4_fimd_driver_data = {
+static struct fimd_driver_data exynos4_fimd_driver_data = {
 	.timing_base = 0x0,
 };
 
-struct fimd_driver_data exynos5_fimd_driver_data = {
+static struct fimd_driver_data exynos5_fimd_driver_data = {
 	.timing_base = 0x20000,
 };
 
diff --git a/drivers/gpu/drm/exynos/exynos_drm_plane.c b/drivers/gpu/drm/exynos/exynos_drm_plane.c
index 60b877a..862ca1e 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_plane.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_plane.c
@@ -204,7 +204,6 @@
 		return ret;
 
 	plane->crtc = crtc;
-	plane->fb = crtc->fb;
 
 	exynos_plane_commit(plane);
 	exynos_plane_dpms(plane, DRM_MODE_DPMS_ON);
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 107f09b..9b285da 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -1796,7 +1796,7 @@
 	 */
 	mapping = obj->base.filp->f_path.dentry->d_inode->i_mapping;
 	gfp = mapping_gfp_mask(mapping);
-	gfp |= __GFP_NORETRY | __GFP_NOWARN;
+	gfp |= __GFP_NORETRY | __GFP_NOWARN | __GFP_NO_KSWAPD;
 	gfp &= ~(__GFP_IO | __GFP_WAIT);
 	for_each_sg(st->sgl, sg, page_count, i) {
 		page = shmem_read_mapping_page_gfp(mapping, i, gfp);
@@ -1809,7 +1809,7 @@
 			 * our own buffer, now let the real VM do its job and
 			 * go down in flames if truly OOM.
 			 */
-			gfp &= ~(__GFP_NORETRY | __GFP_NOWARN);
+			gfp &= ~(__GFP_NORETRY | __GFP_NOWARN | __GFP_NO_KSWAPD);
 			gfp |= __GFP_IO | __GFP_WAIT;
 
 			i915_gem_shrink_all(dev_priv);
@@ -1817,7 +1817,7 @@
 			if (IS_ERR(page))
 				goto err_pages;
 
-			gfp |= __GFP_NORETRY | __GFP_NOWARN;
+			gfp |= __GFP_NORETRY | __GFP_NOWARN | __GFP_NO_KSWAPD;
 			gfp &= ~(__GFP_IO | __GFP_WAIT);
 		}
 
diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c
index 0ed6baf..56846ed 100644
--- a/drivers/gpu/drm/i915/intel_bios.c
+++ b/drivers/gpu/drm/i915/intel_bios.c
@@ -499,12 +499,8 @@
 
 	edp = find_section(bdb, BDB_EDP);
 	if (!edp) {
-		if (SUPPORTS_EDP(dev_priv->dev) && dev_priv->edp.support) {
-			DRM_DEBUG_KMS("No eDP BDB found but eDP panel "
-				      "supported, assume %dbpp panel color "
-				      "depth.\n",
-				      dev_priv->edp.bpp);
-		}
+		if (SUPPORTS_EDP(dev_priv->dev) && dev_priv->edp.support)
+			DRM_DEBUG_KMS("No eDP BDB found but eDP panel supported.\n");
 		return;
 	}
 
@@ -657,9 +653,6 @@
 	dev_priv->lvds_use_ssc = 1;
 	dev_priv->lvds_ssc_freq = intel_bios_ssc_frequency(dev, 1);
 	DRM_DEBUG_KMS("Set default to SSC at %dMHz\n", dev_priv->lvds_ssc_freq);
-
-	/* eDP data */
-	dev_priv->edp.bpp = 18;
 }
 
 static int __init intel_no_opregion_vbt_callback(const struct dmi_system_id *id)
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index b726b47..6345878 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -143,7 +143,7 @@
 	int old_dpms;
 
 	/* PCH platforms and VLV only support on/off. */
-	if (INTEL_INFO(dev)->gen < 5 && mode != DRM_MODE_DPMS_ON)
+	if (INTEL_INFO(dev)->gen >= 5 && mode != DRM_MODE_DPMS_ON)
 		mode = DRM_MODE_DPMS_OFF;
 
 	if (mode == connector->dpms)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 461a637..b426d44 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -3841,6 +3841,17 @@
 			}
 		}
 
+		if (intel_encoder->type == INTEL_OUTPUT_EDP) {
+			/* Use VBT settings if we have an eDP panel */
+			unsigned int edp_bpc = dev_priv->edp.bpp / 3;
+
+			if (edp_bpc && edp_bpc < display_bpc) {
+				DRM_DEBUG_KMS("clamping display bpc (was %d) to eDP (%d)\n", display_bpc, edp_bpc);
+				display_bpc = edp_bpc;
+			}
+			continue;
+		}
+
 		/*
 		 * HDMI is either 12 or 8, so if the display lets 10bpc sneak
 		 * through, clamp it down.  (Note: >12bpc will be caught below.)
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 72f41aa..442968f 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -2373,15 +2373,9 @@
 	if (i915_enable_rc6 >= 0)
 		return i915_enable_rc6;
 
-	if (INTEL_INFO(dev)->gen == 5) {
-#ifdef CONFIG_INTEL_IOMMU
-		/* Disable rc6 on ilk if VT-d is on. */
-		if (intel_iommu_gfx_mapped)
-			return false;
-#endif
-		DRM_DEBUG_DRIVER("Ironlake: only RC6 available\n");
-		return INTEL_RC6_ENABLE;
-	}
+	/* Disable RC6 on Ironlake */
+	if (INTEL_INFO(dev)->gen == 5)
+		return 0;
 
 	if (IS_HASWELL(dev)) {
 		DRM_DEBUG_DRIVER("Haswell: only RC6 available\n");
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index 79d308d..a6ac0b4 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -2201,7 +2201,6 @@
 		connector->connector_type = DRM_MODE_CONNECTOR_HDMIA;
 		intel_sdvo->is_hdmi = true;
 	}
-	intel_sdvo->base.cloneable = true;
 
 	intel_sdvo_connector_init(intel_sdvo_connector, intel_sdvo);
 	if (intel_sdvo->is_hdmi)
@@ -2232,7 +2231,6 @@
 
 	intel_sdvo->is_tv = true;
 	intel_sdvo->base.needs_tv_clock = true;
-	intel_sdvo->base.cloneable = false;
 
 	intel_sdvo_connector_init(intel_sdvo_connector, intel_sdvo);
 
@@ -2275,8 +2273,6 @@
 		intel_sdvo_connector->output_flag = SDVO_OUTPUT_RGB1;
 	}
 
-	intel_sdvo->base.cloneable = true;
-
 	intel_sdvo_connector_init(intel_sdvo_connector,
 				  intel_sdvo);
 	return true;
@@ -2307,9 +2303,6 @@
 		intel_sdvo_connector->output_flag = SDVO_OUTPUT_LVDS1;
 	}
 
-	/* SDVO LVDS is not cloneable because the input mode gets adjusted by the encoder */
-	intel_sdvo->base.cloneable = false;
-
 	intel_sdvo_connector_init(intel_sdvo_connector, intel_sdvo);
 	if (!intel_sdvo_create_enhance_property(intel_sdvo, intel_sdvo_connector))
 		goto err;
@@ -2382,6 +2375,18 @@
 	return true;
 }
 
+static void intel_sdvo_output_cleanup(struct intel_sdvo *intel_sdvo)
+{
+	struct drm_device *dev = intel_sdvo->base.base.dev;
+	struct drm_connector *connector, *tmp;
+
+	list_for_each_entry_safe(connector, tmp,
+				 &dev->mode_config.connector_list, head) {
+		if (intel_attached_encoder(connector) == &intel_sdvo->base)
+			intel_sdvo_destroy(connector);
+	}
+}
+
 static bool intel_sdvo_tv_create_property(struct intel_sdvo *intel_sdvo,
 					  struct intel_sdvo_connector *intel_sdvo_connector,
 					  int type)
@@ -2705,9 +2710,20 @@
 				    intel_sdvo->caps.output_flags) != true) {
 		DRM_DEBUG_KMS("SDVO output failed to setup on %s\n",
 			      SDVO_NAME(intel_sdvo));
-		goto err;
+		/* Output_setup can leave behind connectors! */
+		goto err_output;
 	}
 
+	/*
+	 * Cloning SDVO with anything is often impossible, since the SDVO
+	 * encoder can request a special input timing mode. And even if that's
+	 * not the case we have evidence that cloning a plain unscaled mode with
+	 * VGA doesn't really work. Furthermore the cloning flags are way too
+	 * simplistic anyway to express such constraints, so just give up on
+	 * cloning for SDVO encoders.
+	 */
+	intel_sdvo->base.cloneable = false;
+
 	/* Only enable the hotplug irq if we need it, to work around noisy
 	 * hotplug lines.
 	 */
@@ -2718,12 +2734,12 @@
 
 	/* Set the input timing to the screen. Assume always input 0. */
 	if (!intel_sdvo_set_target_input(intel_sdvo))
-		goto err;
+		goto err_output;
 
 	if (!intel_sdvo_get_input_pixel_clock_range(intel_sdvo,
 						    &intel_sdvo->pixel_clock_min,
 						    &intel_sdvo->pixel_clock_max))
-		goto err;
+		goto err_output;
 
 	DRM_DEBUG_KMS("%s device VID/DID: %02X:%02X.%02X, "
 			"clock range %dMHz - %dMHz, "
@@ -2743,6 +2759,9 @@
 			(SDVO_OUTPUT_TMDS1 | SDVO_OUTPUT_RGB1) ? 'Y' : 'N');
 	return true;
 
+err_output:
+	intel_sdvo_output_cleanup(intel_sdvo);
+
 err:
 	drm_encoder_cleanup(&intel_encoder->base);
 	i2c_del_adapter(&intel_sdvo->ddc);
diff --git a/drivers/gpu/drm/nouveau/core/engine/disp/nv50.c b/drivers/gpu/drm/nouveau/core/engine/disp/nv50.c
index 05a909a..15b182c 100644
--- a/drivers/gpu/drm/nouveau/core/engine/disp/nv50.c
+++ b/drivers/gpu/drm/nouveau/core/engine/disp/nv50.c
@@ -49,13 +49,7 @@
 		if (chan->vblank.crtc != crtc)
 			continue;
 
-		if (nv_device(priv)->chipset == 0x50) {
-			nv_wr32(priv, 0x001704, chan->vblank.channel);
-			nv_wr32(priv, 0x001710, 0x80000000 | chan->vblank.ctxdma);
-			bar->flush(bar);
-			nv_wr32(priv, 0x001570, chan->vblank.offset);
-			nv_wr32(priv, 0x001574, chan->vblank.value);
-		} else {
+		if (nv_device(priv)->chipset >= 0xc0) {
 			nv_wr32(priv, 0x001718, 0x80000000 | chan->vblank.channel);
 			bar->flush(bar);
 			nv_wr32(priv, 0x06000c,
@@ -63,6 +57,17 @@
 			nv_wr32(priv, 0x060010,
 				lower_32_bits(chan->vblank.offset));
 			nv_wr32(priv, 0x060014, chan->vblank.value);
+		} else {
+			nv_wr32(priv, 0x001704, chan->vblank.channel);
+			nv_wr32(priv, 0x001710, 0x80000000 | chan->vblank.ctxdma);
+			bar->flush(bar);
+			if (nv_device(priv)->chipset == 0x50) {
+				nv_wr32(priv, 0x001570, chan->vblank.offset);
+				nv_wr32(priv, 0x001574, chan->vblank.value);
+			} else {
+				nv_wr32(priv, 0x060010, chan->vblank.offset);
+				nv_wr32(priv, 0x060014, chan->vblank.value);
+			}
 		}
 
 		list_del(&chan->vblank.head);
diff --git a/drivers/gpu/drm/nouveau/core/engine/graph/ctxnv40.c b/drivers/gpu/drm/nouveau/core/engine/graph/ctxnv40.c
index e45035e..7bbb1e1 100644
--- a/drivers/gpu/drm/nouveau/core/engine/graph/ctxnv40.c
+++ b/drivers/gpu/drm/nouveau/core/engine/graph/ctxnv40.c
@@ -669,21 +669,27 @@
 			   });
 }
 
-void
+int
 nv40_grctx_init(struct nouveau_device *device, u32 *size)
 {
-	u32 ctxprog[256], i;
+	u32 *ctxprog = kmalloc(256 * 4, GFP_KERNEL), i;
 	struct nouveau_grctx ctx = {
 		.device = device,
 		.mode = NOUVEAU_GRCTX_PROG,
 		.data = ctxprog,
-		.ctxprog_max = ARRAY_SIZE(ctxprog)
+		.ctxprog_max = 256,
 	};
 
+	if (!ctxprog)
+		return -ENOMEM;
+
 	nv40_grctx_generate(&ctx);
 
 	nv_wr32(device, 0x400324, 0);
 	for (i = 0; i < ctx.ctxprog_len; i++)
 		nv_wr32(device, 0x400328, ctxprog[i]);
 	*size = ctx.ctxvals_pos * 4;
+
+	kfree(ctxprog);
+	return 0;
 }
diff --git a/drivers/gpu/drm/nouveau/core/engine/graph/nv40.c b/drivers/gpu/drm/nouveau/core/engine/graph/nv40.c
index 4250012..cc6574e 100644
--- a/drivers/gpu/drm/nouveau/core/engine/graph/nv40.c
+++ b/drivers/gpu/drm/nouveau/core/engine/graph/nv40.c
@@ -346,7 +346,9 @@
 		return ret;
 
 	/* generate and upload context program */
-	nv40_grctx_init(nv_device(priv), &priv->size);
+	ret = nv40_grctx_init(nv_device(priv), &priv->size);
+	if (ret)
+		return ret;
 
 	/* No context present currently */
 	nv_wr32(priv, NV40_PGRAPH_CTXCTL_CUR, 0x00000000);
diff --git a/drivers/gpu/drm/nouveau/core/engine/graph/nv40.h b/drivers/gpu/drm/nouveau/core/engine/graph/nv40.h
index d2ac975..7da35a4 100644
--- a/drivers/gpu/drm/nouveau/core/engine/graph/nv40.h
+++ b/drivers/gpu/drm/nouveau/core/engine/graph/nv40.h
@@ -15,7 +15,7 @@
 	return !(0x0baf & (1 << (device->chipset & 0x0f)));
 }
 
-void nv40_grctx_init(struct nouveau_device *, u32 *size);
+int  nv40_grctx_init(struct nouveau_device *, u32 *size);
 void nv40_grctx_fill(struct nouveau_device *, struct nouveau_gpuobj *);
 
 #endif
diff --git a/drivers/gpu/drm/nouveau/core/include/core/object.h b/drivers/gpu/drm/nouveau/core/include/core/object.h
index 818feab..486f1a9 100644
--- a/drivers/gpu/drm/nouveau/core/include/core/object.h
+++ b/drivers/gpu/drm/nouveau/core/include/core/object.h
@@ -175,14 +175,18 @@
 	return temp;
 }
 
-static inline bool
-nv_strncmp(void *obj, u32 addr, u32 len, const char *str)
+static inline int
+nv_memcmp(void *obj, u32 addr, const char *str, u32 len)
 {
+	unsigned char c1, c2;
+
 	while (len--) {
-		if (nv_ro08(obj, addr++) != *(str++))
-			return false;
+		c1 = nv_ro08(obj, addr++);
+		c2 = *(str++);
+		if (c1 != c2)
+			return c1 - c2;
 	}
-	return true;
+	return 0;
 }
 
 #endif
diff --git a/drivers/gpu/drm/nouveau/core/include/subdev/clock.h b/drivers/gpu/drm/nouveau/core/include/subdev/clock.h
index 39e73b9..41b7a6a 100644
--- a/drivers/gpu/drm/nouveau/core/include/subdev/clock.h
+++ b/drivers/gpu/drm/nouveau/core/include/subdev/clock.h
@@ -54,6 +54,7 @@
 			int clk, struct nouveau_pll_vals *);
 int nv04_clock_pll_prog(struct nouveau_clock *, u32 reg1,
 			struct nouveau_pll_vals *);
-
+int nva3_clock_pll_calc(struct nouveau_clock *, struct nvbios_pll *,
+			int clk, struct nouveau_pll_vals *);
 
 #endif
diff --git a/drivers/gpu/drm/nouveau/core/subdev/bios/dcb.c b/drivers/gpu/drm/nouveau/core/subdev/bios/dcb.c
index 7d75038..c511971 100644
--- a/drivers/gpu/drm/nouveau/core/subdev/bios/dcb.c
+++ b/drivers/gpu/drm/nouveau/core/subdev/bios/dcb.c
@@ -64,7 +64,7 @@
 		}
 	} else
 	if (*ver >= 0x15) {
-		if (!nv_strncmp(bios, dcb - 7, 7, "DEV_REC")) {
+		if (!nv_memcmp(bios, dcb - 7, "DEV_REC", 7)) {
 			u16 i2c = nv_ro16(bios, dcb + 2);
 			*hdr = 4;
 			*cnt = (i2c - dcb) / 10;
diff --git a/drivers/gpu/drm/nouveau/core/subdev/clock/nva3.c b/drivers/gpu/drm/nouveau/core/subdev/clock/nva3.c
index cc8d7d1..9068c98 100644
--- a/drivers/gpu/drm/nouveau/core/subdev/clock/nva3.c
+++ b/drivers/gpu/drm/nouveau/core/subdev/clock/nva3.c
@@ -66,6 +66,24 @@
 	return ret;
 }
 
+int
+nva3_clock_pll_calc(struct nouveau_clock *clock, struct nvbios_pll *info,
+		    int clk, struct nouveau_pll_vals *pv)
+{
+	int ret, N, M, P;
+
+	ret = nva3_pll_calc(clock, info, clk, &N, NULL, &M, &P);
+
+	if (ret > 0) {
+		pv->refclk = info->refclk;
+		pv->N1 = N;
+		pv->M1 = M;
+		pv->log2P = P;
+	}
+	return ret;
+}
+
+
 static int
 nva3_clock_ctor(struct nouveau_object *parent, struct nouveau_object *engine,
 		struct nouveau_oclass *oclass, void *data, u32 size,
@@ -80,6 +98,7 @@
 		return ret;
 
 	priv->base.pll_set = nva3_clock_pll_set;
+	priv->base.pll_calc = nva3_clock_pll_calc;
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/nouveau/core/subdev/clock/nvc0.c b/drivers/gpu/drm/nouveau/core/subdev/clock/nvc0.c
index 5ccce0b..f6962c9 100644
--- a/drivers/gpu/drm/nouveau/core/subdev/clock/nvc0.c
+++ b/drivers/gpu/drm/nouveau/core/subdev/clock/nvc0.c
@@ -79,6 +79,7 @@
 		return ret;
 
 	priv->base.pll_set = nvc0_clock_pll_set;
+	priv->base.pll_calc = nva3_clock_pll_calc;
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/nouveau/nouveau_abi16.c b/drivers/gpu/drm/nouveau/nouveau_abi16.c
index cc79c79..cbf1fc6 100644
--- a/drivers/gpu/drm/nouveau/nouveau_abi16.c
+++ b/drivers/gpu/drm/nouveau/nouveau_abi16.c
@@ -241,6 +241,10 @@
 
 	if (unlikely(!abi16))
 		return -ENOMEM;
+
+	if (!drm->channel)
+		return nouveau_abi16_put(abi16, -ENODEV);
+
 	client = nv_client(abi16->client);
 
 	if (init->fb_ctxdma_handle == ~0 || init->tt_ctxdma_handle == ~0)
diff --git a/drivers/gpu/drm/nouveau/nouveau_drm.c b/drivers/gpu/drm/nouveau/nouveau_drm.c
index 0910125..8503b2e 100644
--- a/drivers/gpu/drm/nouveau/nouveau_drm.c
+++ b/drivers/gpu/drm/nouveau/nouveau_drm.c
@@ -129,7 +129,8 @@
 
 	/* initialise synchronisation routines */
 	if      (device->card_type < NV_10) ret = nv04_fence_create(drm);
-	else if (device->chipset   <  0x84) ret = nv10_fence_create(drm);
+	else if (device->card_type < NV_50) ret = nv10_fence_create(drm);
+	else if (device->chipset   <  0x84) ret = nv50_fence_create(drm);
 	else if (device->card_type < NV_C0) ret = nv84_fence_create(drm);
 	else                                ret = nvc0_fence_create(drm);
 	if (ret) {
diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c
index 3bce029..24d932f 100644
--- a/drivers/gpu/drm/radeon/atombios_crtc.c
+++ b/drivers/gpu/drm/radeon/atombios_crtc.c
@@ -1696,42 +1696,22 @@
 			return ATOM_PPLL2;
 		DRM_ERROR("unable to allocate a PPLL\n");
 		return ATOM_PPLL_INVALID;
-	} else if (ASIC_IS_AVIVO(rdev)) {
-		/* in DP mode, the DP ref clock can come from either PPLL
-		 * depending on the asic:
-		 * DCE3: PPLL1 or PPLL2
-		 */
-		if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(radeon_crtc->encoder))) {
-			/* use the same PPLL for all DP monitors */
-			pll = radeon_get_shared_dp_ppll(crtc);
-			if (pll != ATOM_PPLL_INVALID)
-				return pll;
-		} else {
-			/* use the same PPLL for all monitors with the same clock */
-			pll = radeon_get_shared_nondp_ppll(crtc);
-			if (pll != ATOM_PPLL_INVALID)
-				return pll;
-		}
-		/* all other cases */
-		pll_in_use = radeon_get_pll_use_mask(crtc);
-		/* the order shouldn't matter here, but we probably
-		 * need this until we have atomic modeset
-		 */
-		if (rdev->flags & RADEON_IS_IGP) {
-			if (!(pll_in_use & (1 << ATOM_PPLL1)))
-				return ATOM_PPLL1;
-			if (!(pll_in_use & (1 << ATOM_PPLL2)))
-				return ATOM_PPLL2;
-		} else {
-			if (!(pll_in_use & (1 << ATOM_PPLL2)))
-				return ATOM_PPLL2;
-			if (!(pll_in_use & (1 << ATOM_PPLL1)))
-				return ATOM_PPLL1;
-		}
-		DRM_ERROR("unable to allocate a PPLL\n");
-		return ATOM_PPLL_INVALID;
 	} else {
 		/* on pre-R5xx asics, the crtc to pll mapping is hardcoded */
+		/* some atombios (observed in some DCE2/DCE3) code have a bug,
+		 * the matching btw pll and crtc is done through
+		 * PCLK_CRTC[1|2]_CNTL (0x480/0x484) but atombios code use the
+		 * pll (1 or 2) to select which register to write. ie if using
+		 * pll1 it will use PCLK_CRTC1_CNTL (0x480) and if using pll2
+		 * it will use PCLK_CRTC2_CNTL (0x484), it then use crtc id to
+		 * choose which value to write. Which is reverse order from
+		 * register logic. So only case that works is when pllid is
+		 * same as crtcid or when both pll and crtc are enabled and
+		 * both use same clock.
+		 *
+		 * So just return crtc id as if crtc and pll were hard linked
+		 * together even if they aren't
+		 */
 		return radeon_crtc->crtc_id;
 	}
 }
diff --git a/drivers/gpu/drm/radeon/atombios_encoders.c b/drivers/gpu/drm/radeon/atombios_encoders.c
index ba498f8..010bae1 100644
--- a/drivers/gpu/drm/radeon/atombios_encoders.c
+++ b/drivers/gpu/drm/radeon/atombios_encoders.c
@@ -1625,7 +1625,7 @@
 			atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_SETUP, 0, 0);
 			atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE, 0, 0);
 			/* some early dce3.2 boards have a bug in their transmitter control table */
-			if ((rdev->family != CHIP_RV710) || (rdev->family != CHIP_RV730))
+			if ((rdev->family != CHIP_RV710) && (rdev->family != CHIP_RV730))
 				atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE_OUTPUT, 0, 0);
 		}
 		if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(encoder)) && connector) {
diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c
index af31f82..219942c 100644
--- a/drivers/gpu/drm/radeon/evergreen.c
+++ b/drivers/gpu/drm/radeon/evergreen.c
@@ -1330,6 +1330,8 @@
 					break;
 				udelay(1);
 			}
+		} else {
+			save->crtc_enabled[i] = false;
 		}
 	}
 
diff --git a/drivers/gpu/drm/radeon/radeon_agp.c b/drivers/gpu/drm/radeon/radeon_agp.c
index 10ea17a..4243334 100644
--- a/drivers/gpu/drm/radeon/radeon_agp.c
+++ b/drivers/gpu/drm/radeon/radeon_agp.c
@@ -69,9 +69,12 @@
 	/* Intel 82830 830 Chipset Host Bridge / Mobility M6 LY Needs AGPMode 2 (fdo #17360)*/
 	{ PCI_VENDOR_ID_INTEL, 0x3575, PCI_VENDOR_ID_ATI, 0x4c59,
 		PCI_VENDOR_ID_DELL, 0x00e3, 2},
-	/* Intel 82852/82855 host bridge / Mobility FireGL 9000 R250 Needs AGPMode 1 (lp #296617) */
+	/* Intel 82852/82855 host bridge / Mobility FireGL 9000 RV250 Needs AGPMode 1 (lp #296617) */
 	{ PCI_VENDOR_ID_INTEL, 0x3580, PCI_VENDOR_ID_ATI, 0x4c66,
 		PCI_VENDOR_ID_DELL, 0x0149, 1},
+	/* Intel 82855PM host bridge / Mobility FireGL 9000 RV250 Needs AGPMode 1 for suspend/resume */
+	{ PCI_VENDOR_ID_INTEL, 0x3340, PCI_VENDOR_ID_ATI, 0x4c66,
+		PCI_VENDOR_ID_IBM, 0x0531, 1},
 	/* Intel 82852/82855 host bridge / Mobility 9600 M10 RV350 Needs AGPMode 1 (deb #467460) */
 	{ PCI_VENDOR_ID_INTEL, 0x3580, PCI_VENDOR_ID_ATI, 0x4e50,
 		0x1025, 0x0061, 1},
diff --git a/drivers/gpu/drm/ttm/ttm_page_alloc.c b/drivers/gpu/drm/ttm/ttm_page_alloc.c
index 860dc48..bd2a3b4 100644
--- a/drivers/gpu/drm/ttm/ttm_page_alloc.c
+++ b/drivers/gpu/drm/ttm/ttm_page_alloc.c
@@ -749,7 +749,10 @@
 	/* clear the pages coming from the pool if requested */
 	if (flags & TTM_PAGE_FLAG_ZERO_ALLOC) {
 		list_for_each_entry(p, &plist, lru) {
-			clear_page(page_address(p));
+			if (PageHighMem(p))
+				clear_highpage(p);
+			else
+				clear_page(page_address(p));
 		}
 	}
 
diff --git a/drivers/gpu/drm/ttm/ttm_tt.c b/drivers/gpu/drm/ttm/ttm_tt.c
index bf82601..7d759a4 100644
--- a/drivers/gpu/drm/ttm/ttm_tt.c
+++ b/drivers/gpu/drm/ttm/ttm_tt.c
@@ -308,9 +308,7 @@
 		if (unlikely(to_page == NULL))
 			goto out_err;
 
-		preempt_disable();
 		copy_highpage(to_page, from_page);
-		preempt_enable();
 		page_cache_release(from_page);
 	}
 
@@ -358,9 +356,7 @@
 			ret = PTR_ERR(to_page);
 			goto out_err;
 		}
-		preempt_disable();
 		copy_highpage(to_page, from_page);
-		preempt_enable();
 		set_page_dirty(to_page);
 		mark_page_accessed(to_page);
 		page_cache_release(to_page);
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c b/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c
index b07ca2e..7290811 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c
@@ -110,6 +110,8 @@
 	memcpy_fromio(bounce, &fifo_mem[SVGA_FIFO_3D_CAPS], size);
 
 	ret = copy_to_user(buffer, bounce, size);
+	if (ret)
+		ret = -EFAULT;
 	vfree(bounce);
 
 	if (unlikely(ret != 0))
diff --git a/drivers/hid/hid-microsoft.c b/drivers/hid/hid-microsoft.c
index f676c01..6fcd466d0 100644
--- a/drivers/hid/hid-microsoft.c
+++ b/drivers/hid/hid-microsoft.c
@@ -46,9 +46,9 @@
 		rdesc[559] = 0x45;
 	}
 	/* the same as above (s/usage/physical/) */
-	if ((quirks & MS_RDESC_3K) && *rsize == 106 &&
-			!memcmp((char []){ 0x19, 0x00, 0x29, 0xff },
-				&rdesc[94], 4)) {
+	if ((quirks & MS_RDESC_3K) && *rsize == 106 && rdesc[94] == 0x19 &&
+			rdesc[95] == 0x00 && rdesc[96] == 0x29 &&
+			rdesc[97] == 0xff) {
 		rdesc[94] = 0x35;
 		rdesc[96] = 0x45;
 	}
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index c4633de..4800d4c 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -334,6 +334,16 @@
 	  This driver can also be built as module. If so, the module
 	  will be called da9052-hwmon.
 
+config SENSORS_DA9055
+	tristate "Dialog Semiconductor DA9055 ADC"
+	depends on MFD_DA9055
+	help
+	  If you say yes here you get support for ADC on the Dialog
+	  Semiconductor DA9055 PMIC.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called da9055-hwmon.
+
 config SENSORS_I5K_AMB
 	tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets"
 	depends on PCI
@@ -455,7 +465,7 @@
 
 config SENSORS_CORETEMP
 	tristate "Intel Core/Core2/Atom temperature sensor"
-	depends on X86 && PCI
+	depends on X86
 	help
 	  If you say yes here you get support for the temperature
 	  sensor inside your CPU. Most of the family 6 CPUs
@@ -1106,11 +1116,12 @@
 	  will be called ads1015.
 
 config SENSORS_ADS7828
-	tristate "Texas Instruments ADS7828"
+	tristate "Texas Instruments ADS7828 and compatibles"
 	depends on I2C
 	help
-	  If you say yes here you get support for Texas Instruments ADS7828
-	  12-bit 8-channel ADC device.
+	  If you say yes here you get support for Texas Instruments ADS7828 and
+	  ADS7830 8-channel A/D converters. ADS7828 resolution is 12-bit, while
+	  it is 8-bit on ADS7830.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called ads7828.
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 8d5fcb5..a930f09 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -44,6 +44,7 @@
 obj-$(CONFIG_SENSORS_ATXP1)	+= atxp1.o
 obj-$(CONFIG_SENSORS_CORETEMP)	+= coretemp.o
 obj-$(CONFIG_SENSORS_DA9052_ADC)+= da9052-hwmon.o
+obj-$(CONFIG_SENSORS_DA9055)+= da9055-hwmon.o
 obj-$(CONFIG_SENSORS_DME1737)	+= dme1737.o
 obj-$(CONFIG_SENSORS_DS620)	+= ds620.o
 obj-$(CONFIG_SENSORS_DS1621)	+= ds1621.o
diff --git a/drivers/hwmon/ads7828.c b/drivers/hwmon/ads7828.c
index 1f9e8af..409b5c1 100644
--- a/drivers/hwmon/ads7828.c
+++ b/drivers/hwmon/ads7828.c
@@ -1,12 +1,14 @@
 /*
- * ads7828.c - lm_sensors driver for ads7828 12-bit 8-channel ADC
+ * ads7828.c - driver for TI ADS7828 8-channel A/D converter and compatibles
  * (C) 2007 EADS Astrium
  *
  * This driver is based on the lm75 and other lm_sensors/hwmon drivers
  *
  * Written by Steve Hardy <shardy@redhat.com>
  *
- * Datasheet available at: http://focus.ti.com/lit/ds/symlink/ads7828.pdf
+ * ADS7830 support, by Guillaume Roguez <guillaume.roguez@savoirfairelinux.com>
+ *
+ * For further information, see the Documentation/hwmon/ads7828 file.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -23,63 +25,48 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/jiffies.h>
-#include <linux/i2c.h>
+#include <linux/err.h>
 #include <linux/hwmon.h>
 #include <linux/hwmon-sysfs.h>
-#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
 #include <linux/mutex.h>
+#include <linux/platform_data/ads7828.h>
+#include <linux/slab.h>
 
 /* The ADS7828 registers */
-#define ADS7828_NCH 8 /* 8 channels of 12-bit A-D supported */
-#define ADS7828_CMD_SD_SE 0x80 /* Single ended inputs */
-#define ADS7828_CMD_SD_DIFF 0x00 /* Differential inputs */
-#define ADS7828_CMD_PD0 0x0 /* Power Down between A-D conversions */
-#define ADS7828_CMD_PD1 0x04 /* Internal ref OFF && A-D ON */
-#define ADS7828_CMD_PD2 0x08 /* Internal ref ON && A-D OFF */
-#define ADS7828_CMD_PD3 0x0C /* Internal ref ON && A-D ON */
-#define ADS7828_INT_VREF_MV 2500 /* Internal vref is 2.5V, 2500mV */
+#define ADS7828_NCH		8	/* 8 channels supported */
+#define ADS7828_CMD_SD_SE	0x80	/* Single ended inputs */
+#define ADS7828_CMD_PD1		0x04	/* Internal vref OFF && A/D ON */
+#define ADS7828_CMD_PD3		0x0C	/* Internal vref ON && A/D ON */
+#define ADS7828_INT_VREF_MV	2500	/* Internal vref is 2.5V, 2500mV */
+#define ADS7828_EXT_VREF_MV_MIN	50	/* External vref min value 0.05V */
+#define ADS7828_EXT_VREF_MV_MAX	5250	/* External vref max value 5.25V */
 
-/* Addresses to scan */
-static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b,
-	I2C_CLIENT_END };
+/* List of supported devices */
+enum ads7828_chips { ads7828, ads7830 };
 
-/* Module parameters */
-static bool se_input = 1; /* Default is SE, 0 == diff */
-static bool int_vref = 1; /* Default is internal ref ON */
-static int vref_mv = ADS7828_INT_VREF_MV; /* set if vref != 2.5V */
-module_param(se_input, bool, S_IRUGO);
-module_param(int_vref, bool, S_IRUGO);
-module_param(vref_mv, int, S_IRUGO);
-
-/* Global Variables */
-static u8 ads7828_cmd_byte; /* cmd byte without channel bits */
-static unsigned int ads7828_lsb_resol; /* resolution of the ADC sample lsb */
-
-/* Each client has this additional data */
+/* Client specific data */
 struct ads7828_data {
 	struct device *hwmon_dev;
-	struct mutex update_lock; /* mutex protect updates */
-	char valid; /* !=0 if following fields are valid */
-	unsigned long last_updated; /* In jiffies */
-	u16 adc_input[ADS7828_NCH]; /* ADS7828_NCH 12-bit samples */
+	struct mutex update_lock;	/* Mutex protecting updates */
+	unsigned long last_updated;	/* Last updated time (in jiffies) */
+	u16 adc_input[ADS7828_NCH];	/* ADS7828_NCH samples */
+	bool valid;			/* Validity flag */
+	bool diff_input;		/* Differential input */
+	bool ext_vref;			/* External voltage reference */
+	unsigned int vref_mv;		/* voltage reference value */
+	u8 cmd_byte;			/* Command byte without channel bits */
+	unsigned int lsb_resol;		/* Resolution of the ADC sample LSB */
+	s32 (*read_channel)(const struct i2c_client *client, u8 command);
 };
 
-/* Function declaration - necessary due to function dependencies */
-static int ads7828_detect(struct i2c_client *client,
-			  struct i2c_board_info *info);
-static int ads7828_probe(struct i2c_client *client,
-			 const struct i2c_device_id *id);
-
-static inline u8 channel_cmd_byte(int ch)
+/* Command byte C2,C1,C0 - see datasheet */
+static inline u8 ads7828_cmd_byte(u8 cmd, int ch)
 {
-	/* cmd byte C2,C1,C0 - see datasheet */
-	u8 cmd = (((ch>>1) | (ch&0x01)<<2)<<4);
-	cmd |= ads7828_cmd_byte;
-	return cmd;
+	return cmd | (((ch >> 1) | (ch & 0x01) << 2) << 4);
 }
 
 /* Update data for the device (all 8 channels) */
@@ -96,12 +83,11 @@
 		dev_dbg(&client->dev, "Starting ads7828 update\n");
 
 		for (ch = 0; ch < ADS7828_NCH; ch++) {
-			u8 cmd = channel_cmd_byte(ch);
-			data->adc_input[ch] =
-				i2c_smbus_read_word_swapped(client, cmd);
+			u8 cmd = ads7828_cmd_byte(data->cmd_byte, ch);
+			data->adc_input[ch] = data->read_channel(client, cmd);
 		}
 		data->last_updated = jiffies;
-		data->valid = 1;
+		data->valid = true;
 	}
 
 	mutex_unlock(&data->update_lock);
@@ -110,28 +96,25 @@
 }
 
 /* sysfs callback function */
-static ssize_t show_in(struct device *dev, struct device_attribute *da,
-	char *buf)
+static ssize_t ads7828_show_in(struct device *dev, struct device_attribute *da,
+			       char *buf)
 {
 	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
 	struct ads7828_data *data = ads7828_update_device(dev);
-	/* Print value (in mV as specified in sysfs-interface documentation) */
-	return sprintf(buf, "%d\n", (data->adc_input[attr->index] *
-		ads7828_lsb_resol)/1000);
+	unsigned int value = DIV_ROUND_CLOSEST(data->adc_input[attr->index] *
+					       data->lsb_resol, 1000);
+
+	return sprintf(buf, "%d\n", value);
 }
 
-#define in_reg(offset)\
-static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, show_in,\
-	NULL, offset)
-
-in_reg(0);
-in_reg(1);
-in_reg(2);
-in_reg(3);
-in_reg(4);
-in_reg(5);
-in_reg(6);
-in_reg(7);
+static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, ads7828_show_in, NULL, 0);
+static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, ads7828_show_in, NULL, 1);
+static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, ads7828_show_in, NULL, 2);
+static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, ads7828_show_in, NULL, 3);
+static SENSOR_DEVICE_ATTR(in4_input, S_IRUGO, ads7828_show_in, NULL, 4);
+static SENSOR_DEVICE_ATTR(in5_input, S_IRUGO, ads7828_show_in, NULL, 5);
+static SENSOR_DEVICE_ATTR(in6_input, S_IRUGO, ads7828_show_in, NULL, 6);
+static SENSOR_DEVICE_ATTR(in7_input, S_IRUGO, ads7828_show_in, NULL, 7);
 
 static struct attribute *ads7828_attributes[] = {
 	&sensor_dev_attr_in0_input.dev_attr.attr,
@@ -152,60 +135,9 @@
 static int ads7828_remove(struct i2c_client *client)
 {
 	struct ads7828_data *data = i2c_get_clientdata(client);
+
 	hwmon_device_unregister(data->hwmon_dev);
 	sysfs_remove_group(&client->dev.kobj, &ads7828_group);
-	return 0;
-}
-
-static const struct i2c_device_id ads7828_id[] = {
-	{ "ads7828", 0 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, ads7828_id);
-
-/* This is the driver that will be inserted */
-static struct i2c_driver ads7828_driver = {
-	.class = I2C_CLASS_HWMON,
-	.driver = {
-		.name = "ads7828",
-	},
-	.probe = ads7828_probe,
-	.remove = ads7828_remove,
-	.id_table = ads7828_id,
-	.detect = ads7828_detect,
-	.address_list = normal_i2c,
-};
-
-/* Return 0 if detection is successful, -ENODEV otherwise */
-static int ads7828_detect(struct i2c_client *client,
-			  struct i2c_board_info *info)
-{
-	struct i2c_adapter *adapter = client->adapter;
-	int ch;
-
-	/* Check we have a valid client */
-	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_WORD_DATA))
-		return -ENODEV;
-
-	/*
-	 * Now, we do the remaining detection. There is no identification
-	 * dedicated register so attempt to sanity check using knowledge of
-	 * the chip
-	 * - Read from the 8 channel addresses
-	 * - Check the top 4 bits of each result are not set (12 data bits)
-	 */
-	for (ch = 0; ch < ADS7828_NCH; ch++) {
-		u16 in_data;
-		u8 cmd = channel_cmd_byte(ch);
-		in_data = i2c_smbus_read_word_swapped(client, cmd);
-		if (in_data & 0xF000) {
-			pr_debug("%s : Doesn't look like an ads7828 device\n",
-				 __func__);
-			return -ENODEV;
-		}
-	}
-
-	strlcpy(info->type, "ads7828", I2C_NAME_SIZE);
 
 	return 0;
 }
@@ -213,6 +145,7 @@
 static int ads7828_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
+	struct ads7828_platform_data *pdata = client->dev.platform_data;
 	struct ads7828_data *data;
 	int err;
 
@@ -221,10 +154,37 @@
 	if (!data)
 		return -ENOMEM;
 
+	if (pdata) {
+		data->diff_input = pdata->diff_input;
+		data->ext_vref = pdata->ext_vref;
+		if (data->ext_vref)
+			data->vref_mv = pdata->vref_mv;
+	}
+
+	/* Bound Vref with min/max values if it was provided */
+	if (data->vref_mv)
+		data->vref_mv = SENSORS_LIMIT(data->vref_mv,
+					      ADS7828_EXT_VREF_MV_MIN,
+					      ADS7828_EXT_VREF_MV_MAX);
+	else
+		data->vref_mv = ADS7828_INT_VREF_MV;
+
+	/* ADS7828 uses 12-bit samples, while ADS7830 is 8-bit */
+	if (id->driver_data == ads7828) {
+		data->lsb_resol = DIV_ROUND_CLOSEST(data->vref_mv * 1000, 4096);
+		data->read_channel = i2c_smbus_read_word_swapped;
+	} else {
+		data->lsb_resol = DIV_ROUND_CLOSEST(data->vref_mv * 1000, 256);
+		data->read_channel = i2c_smbus_read_byte_data;
+	}
+
+	data->cmd_byte = data->ext_vref ? ADS7828_CMD_PD1 : ADS7828_CMD_PD3;
+	if (!data->diff_input)
+		data->cmd_byte |= ADS7828_CMD_SD_SE;
+
 	i2c_set_clientdata(client, data);
 	mutex_init(&data->update_lock);
 
-	/* Register sysfs hooks */
 	err = sysfs_create_group(&client->dev.kobj, &ads7828_group);
 	if (err)
 		return err;
@@ -232,38 +192,35 @@
 	data->hwmon_dev = hwmon_device_register(&client->dev);
 	if (IS_ERR(data->hwmon_dev)) {
 		err = PTR_ERR(data->hwmon_dev);
-		goto exit_remove;
+		goto error;
 	}
 
 	return 0;
 
-exit_remove:
+error:
 	sysfs_remove_group(&client->dev.kobj, &ads7828_group);
 	return err;
 }
 
-static int __init sensors_ads7828_init(void)
-{
-	/* Initialize the command byte according to module parameters */
-	ads7828_cmd_byte = se_input ?
-		ADS7828_CMD_SD_SE : ADS7828_CMD_SD_DIFF;
-	ads7828_cmd_byte |= int_vref ?
-		ADS7828_CMD_PD3 : ADS7828_CMD_PD1;
+static const struct i2c_device_id ads7828_device_ids[] = {
+	{ "ads7828", ads7828 },
+	{ "ads7830", ads7830 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, ads7828_device_ids);
 
-	/* Calculate the LSB resolution */
-	ads7828_lsb_resol = (vref_mv*1000)/4096;
+static struct i2c_driver ads7828_driver = {
+	.driver = {
+		.name = "ads7828",
+	},
 
-	return i2c_add_driver(&ads7828_driver);
-}
+	.id_table = ads7828_device_ids,
+	.probe = ads7828_probe,
+	.remove = ads7828_remove,
+};
 
-static void __exit sensors_ads7828_exit(void)
-{
-	i2c_del_driver(&ads7828_driver);
-}
+module_i2c_driver(ads7828_driver);
 
-MODULE_AUTHOR("Steve Hardy <shardy@redhat.com>");
-MODULE_DESCRIPTION("ADS7828 driver");
 MODULE_LICENSE("GPL");
-
-module_init(sensors_ads7828_init);
-module_exit(sensors_ads7828_exit);
+MODULE_AUTHOR("Steve Hardy <shardy@redhat.com>");
+MODULE_DESCRIPTION("Driver for TI ADS7828 A/D converter and compatibles");
diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c
index 001e22c..d64923d 100644
--- a/drivers/hwmon/coretemp.c
+++ b/drivers/hwmon/coretemp.c
@@ -34,7 +34,6 @@
 #include <linux/list.h>
 #include <linux/platform_device.h>
 #include <linux/cpu.h>
-#include <linux/pci.h>
 #include <linux/smp.h>
 #include <linux/moduleparam.h>
 #include <asm/msr.h>
@@ -197,14 +196,6 @@
 };
 
 static const struct tjmax __cpuinitconst tjmax_table[] = {
-	{ "CPU D410", 100000 },
-	{ "CPU D425", 100000 },
-	{ "CPU D510", 100000 },
-	{ "CPU D525", 100000 },
-	{ "CPU N450", 100000 },
-	{ "CPU N455", 100000 },
-	{ "CPU N470", 100000 },
-	{ "CPU N475", 100000 },
 	{ "CPU  230", 100000 },		/* Model 0x1c, stepping 2	*/
 	{ "CPU  330", 125000 },		/* Model 0x1c, stepping 2	*/
 	{ "CPU CE4110", 110000 },	/* Model 0x1c, stepping 10	*/
@@ -212,6 +203,28 @@
 	{ "CPU CE4170", 110000 },	/* Model 0x1c, stepping 10	*/
 };
 
+struct tjmax_model {
+	u8 model;
+	u8 mask;
+	int tjmax;
+};
+
+#define ANY 0xff
+
+static const struct tjmax_model __cpuinitconst tjmax_model_table[] = {
+	{ 0x1c, 10, 100000 },	/* D4xx, N4xx, D5xx, N5xx */
+	{ 0x1c, ANY, 90000 },	/* Z5xx, N2xx, possibly others
+				 * Note: Also matches 230 and 330,
+				 * which are covered by tjmax_table
+				 */
+	{ 0x26, ANY, 90000 },	/* Atom Tunnel Creek (Exx), Lincroft (Z6xx)
+				 * Note: TjMax for E6xxT is 110C, but CPU type
+				 * is undetectable by software
+				 */
+	{ 0x27, ANY, 90000 },	/* Atom Medfield (Z2460) */
+	{ 0x36, ANY, 100000 },	/* Atom Cedar Trail/Cedarview (N2xxx, D2xxx) */
+};
+
 static int __cpuinit adjust_tjmax(struct cpuinfo_x86 *c, u32 id,
 				  struct device *dev)
 {
@@ -222,7 +235,6 @@
 	int usemsr_ee = 1;
 	int err;
 	u32 eax, edx;
-	struct pci_dev *host_bridge;
 	int i;
 
 	/* explicit tjmax table entries override heuristics */
@@ -231,32 +243,18 @@
 			return tjmax_table[i].tjmax;
 	}
 
+	for (i = 0; i < ARRAY_SIZE(tjmax_model_table); i++) {
+		const struct tjmax_model *tm = &tjmax_model_table[i];
+		if (c->x86_model == tm->model &&
+		    (tm->mask == ANY || c->x86_mask == tm->mask))
+			return tm->tjmax;
+	}
+
 	/* Early chips have no MSR for TjMax */
 
 	if (c->x86_model == 0xf && c->x86_mask < 4)
 		usemsr_ee = 0;
 
-	/* Atom CPUs */
-
-	if (c->x86_model == 0x1c || c->x86_model == 0x26
-	    || c->x86_model == 0x27) {
-		usemsr_ee = 0;
-
-		host_bridge = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0));
-
-		if (host_bridge && host_bridge->vendor == PCI_VENDOR_ID_INTEL
-		    && (host_bridge->device == 0xa000	/* NM10 based nettop */
-		    || host_bridge->device == 0xa010))	/* NM10 based netbook */
-			tjmax = 100000;
-		else
-			tjmax = 90000;
-
-		pci_dev_put(host_bridge);
-	} else if (c->x86_model == 0x36) {
-		usemsr_ee = 0;
-		tjmax = 100000;
-	}
-
 	if (c->x86_model > 0xe && usemsr_ee) {
 		u8 platform_id;
 
diff --git a/drivers/hwmon/da9052-hwmon.c b/drivers/hwmon/da9052-hwmon.c
index aca7f0c..ab4452c 100644
--- a/drivers/hwmon/da9052-hwmon.c
+++ b/drivers/hwmon/da9052-hwmon.c
@@ -60,30 +60,17 @@
 	return DIV_ROUND_CLOSEST(value * 2500, 512);
 }
 
-static int da9052_enable_vddout_channel(struct da9052 *da9052)
+static inline int da9052_enable_vddout_channel(struct da9052 *da9052)
 {
-	int ret;
-
-	ret = da9052_reg_read(da9052, DA9052_ADC_CONT_REG);
-	if (ret < 0)
-		return ret;
-
-	ret |= DA9052_ADCCONT_AUTOVDDEN;
-
-	return da9052_reg_write(da9052, DA9052_ADC_CONT_REG, ret);
+	return da9052_reg_update(da9052, DA9052_ADC_CONT_REG,
+				 DA9052_ADCCONT_AUTOVDDEN,
+				 DA9052_ADCCONT_AUTOVDDEN);
 }
 
-static int da9052_disable_vddout_channel(struct da9052 *da9052)
+static inline int da9052_disable_vddout_channel(struct da9052 *da9052)
 {
-	int ret;
-
-	ret = da9052_reg_read(da9052, DA9052_ADC_CONT_REG);
-	if (ret < 0)
-		return ret;
-
-	ret &= ~DA9052_ADCCONT_AUTOVDDEN;
-
-	return da9052_reg_write(da9052, DA9052_ADC_CONT_REG, ret);
+	return da9052_reg_update(da9052, DA9052_ADC_CONT_REG,
+				 DA9052_ADCCONT_AUTOVDDEN, 0);
 }
 
 static ssize_t da9052_read_vddout(struct device *dev,
diff --git a/drivers/hwmon/da9055-hwmon.c b/drivers/hwmon/da9055-hwmon.c
new file mode 100644
index 0000000..9465c05
--- /dev/null
+++ b/drivers/hwmon/da9055-hwmon.c
@@ -0,0 +1,336 @@
+/*
+ * HWMON Driver for Dialog DA9055
+ *
+ * Copyright(c) 2012 Dialog Semiconductor Ltd.
+ *
+ * Author: David Dajun Chen <dchen@diasemi.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/completion.h>
+
+#include <linux/mfd/da9055/core.h>
+#include <linux/mfd/da9055/reg.h>
+
+#define DA9055_ADCIN_DIV	102
+#define DA9055_VSYS_DIV	85
+
+#define DA9055_ADC_VSYS	0
+#define DA9055_ADC_ADCIN1	1
+#define DA9055_ADC_ADCIN2	2
+#define DA9055_ADC_ADCIN3	3
+#define DA9055_ADC_TJUNC	4
+
+struct da9055_hwmon {
+	struct da9055	*da9055;
+	struct device	*class_device;
+	struct mutex	hwmon_lock;
+	struct mutex	irq_lock;
+	struct completion done;
+};
+
+static const char * const input_names[] = {
+	[DA9055_ADC_VSYS]	= "VSYS",
+	[DA9055_ADC_ADCIN1]	= "ADC IN1",
+	[DA9055_ADC_ADCIN2]	= "ADC IN2",
+	[DA9055_ADC_ADCIN3]	= "ADC IN3",
+	[DA9055_ADC_TJUNC]	= "CHIP TEMP",
+};
+
+static const u8 chan_mux[DA9055_ADC_TJUNC + 1] = {
+	[DA9055_ADC_VSYS]	= DA9055_ADC_MUX_VSYS,
+	[DA9055_ADC_ADCIN1]	= DA9055_ADC_MUX_ADCIN1,
+	[DA9055_ADC_ADCIN2]	= DA9055_ADC_MUX_ADCIN2,
+	[DA9055_ADC_ADCIN3]	= DA9055_ADC_MUX_ADCIN3,
+	[DA9055_ADC_TJUNC]	= DA9055_ADC_MUX_T_SENSE,
+};
+
+static int da9055_adc_manual_read(struct da9055_hwmon *hwmon,
+					unsigned char channel)
+{
+	int ret;
+	unsigned short calc_data;
+	unsigned short data;
+	unsigned char mux_sel;
+	struct da9055 *da9055 = hwmon->da9055;
+
+	if (channel > DA9055_ADC_TJUNC)
+		return -EINVAL;
+
+	mutex_lock(&hwmon->irq_lock);
+
+	/* Selects desired MUX for manual conversion */
+	mux_sel = chan_mux[channel] | DA9055_ADC_MAN_CONV;
+
+	ret = da9055_reg_write(da9055, DA9055_REG_ADC_MAN, mux_sel);
+	if (ret < 0)
+		goto err;
+
+	/* Wait for an interrupt */
+	if (!wait_for_completion_timeout(&hwmon->done,
+					msecs_to_jiffies(500))) {
+		dev_err(da9055->dev,
+			"timeout waiting for ADC conversion interrupt\n");
+		ret = -ETIMEDOUT;
+		goto err;
+	}
+
+	ret = da9055_reg_read(da9055, DA9055_REG_ADC_RES_H);
+	if (ret < 0)
+		goto err;
+
+	calc_data = (unsigned short)ret;
+	data = calc_data << 2;
+
+	ret = da9055_reg_read(da9055, DA9055_REG_ADC_RES_L);
+	if (ret < 0)
+		goto err;
+
+	calc_data = (unsigned short)(ret & DA9055_ADC_LSB_MASK);
+	data |= calc_data;
+
+	ret = data;
+
+err:
+	mutex_unlock(&hwmon->irq_lock);
+	return ret;
+}
+
+static irqreturn_t da9055_auxadc_irq(int irq, void *irq_data)
+{
+	struct da9055_hwmon *hwmon = irq_data;
+
+	complete(&hwmon->done);
+
+	return IRQ_HANDLED;
+}
+
+/* Conversion function for VSYS and ADCINx */
+static inline int volt_reg_to_mV(int value, int channel)
+{
+	if (channel == DA9055_ADC_VSYS)
+		return DIV_ROUND_CLOSEST(value * 1000, DA9055_VSYS_DIV) + 2500;
+	else
+		return DIV_ROUND_CLOSEST(value * 1000, DA9055_ADCIN_DIV);
+}
+
+static int da9055_enable_auto_mode(struct da9055 *da9055, int channel)
+{
+
+	return da9055_reg_update(da9055, DA9055_REG_ADC_CONT, 1 << channel,
+				1 << channel);
+
+}
+
+static int da9055_disable_auto_mode(struct da9055 *da9055, int channel)
+{
+
+	return da9055_reg_update(da9055, DA9055_REG_ADC_CONT, 1 << channel, 0);
+}
+
+static ssize_t da9055_read_auto_ch(struct device *dev,
+				struct device_attribute *devattr, char *buf)
+{
+	struct da9055_hwmon *hwmon = dev_get_drvdata(dev);
+	int ret, adc;
+	int channel = to_sensor_dev_attr(devattr)->index;
+
+	mutex_lock(&hwmon->hwmon_lock);
+
+	ret = da9055_enable_auto_mode(hwmon->da9055, channel);
+	if (ret < 0)
+		goto hwmon_err;
+
+	usleep_range(10000, 10500);
+
+	adc = da9055_reg_read(hwmon->da9055, DA9055_REG_VSYS_RES + channel);
+	if (adc < 0) {
+		ret = adc;
+		goto hwmon_err_release;
+	}
+
+	ret = da9055_disable_auto_mode(hwmon->da9055, channel);
+	if (ret < 0)
+		goto hwmon_err;
+
+	mutex_unlock(&hwmon->hwmon_lock);
+
+	return sprintf(buf, "%d\n", volt_reg_to_mV(adc, channel));
+
+hwmon_err_release:
+	da9055_disable_auto_mode(hwmon->da9055, channel);
+hwmon_err:
+	mutex_unlock(&hwmon->hwmon_lock);
+	return ret;
+}
+
+static ssize_t da9055_read_tjunc(struct device *dev,
+				 struct device_attribute *devattr, char *buf)
+{
+	struct da9055_hwmon *hwmon = dev_get_drvdata(dev);
+	int tjunc;
+	int toffset;
+
+	tjunc = da9055_adc_manual_read(hwmon, DA9055_ADC_TJUNC);
+	if (tjunc < 0)
+		return tjunc;
+
+	toffset = da9055_reg_read(hwmon->da9055, DA9055_REG_T_OFFSET);
+	if (toffset < 0)
+		return toffset;
+
+	/*
+	 * Degrees celsius = -0.4084 * (ADC_RES - T_OFFSET) + 307.6332
+	 * T_OFFSET is a trim value used to improve accuracy of the result
+	 */
+	return sprintf(buf, "%d\n", DIV_ROUND_CLOSEST(-4084 * (tjunc - toffset)
+							+ 3076332, 10000));
+}
+
+static ssize_t da9055_hwmon_show_name(struct device *dev,
+				      struct device_attribute *devattr,
+				      char *buf)
+{
+	return sprintf(buf, "da9055-hwmon\n");
+}
+
+static ssize_t show_label(struct device *dev,
+			  struct device_attribute *devattr, char *buf)
+{
+	return sprintf(buf, "%s\n",
+		       input_names[to_sensor_dev_attr(devattr)->index]);
+}
+
+static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, da9055_read_auto_ch, NULL,
+			  DA9055_ADC_VSYS);
+static SENSOR_DEVICE_ATTR(in0_label, S_IRUGO, show_label, NULL,
+			  DA9055_ADC_VSYS);
+static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, da9055_read_auto_ch, NULL,
+			  DA9055_ADC_ADCIN1);
+static SENSOR_DEVICE_ATTR(in1_label, S_IRUGO, show_label, NULL,
+			  DA9055_ADC_ADCIN1);
+static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, da9055_read_auto_ch, NULL,
+			  DA9055_ADC_ADCIN2);
+static SENSOR_DEVICE_ATTR(in2_label, S_IRUGO, show_label, NULL,
+			  DA9055_ADC_ADCIN2);
+static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, da9055_read_auto_ch, NULL,
+			  DA9055_ADC_ADCIN3);
+static SENSOR_DEVICE_ATTR(in3_label, S_IRUGO, show_label, NULL,
+			  DA9055_ADC_ADCIN3);
+
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, da9055_read_tjunc, NULL,
+			  DA9055_ADC_TJUNC);
+static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, show_label, NULL,
+			  DA9055_ADC_TJUNC);
+
+static DEVICE_ATTR(name, S_IRUGO, da9055_hwmon_show_name, NULL);
+
+static struct attribute *da9055_attr[] = {
+	&dev_attr_name.attr,
+	&sensor_dev_attr_in0_input.dev_attr.attr,
+	&sensor_dev_attr_in0_label.dev_attr.attr,
+	&sensor_dev_attr_in1_input.dev_attr.attr,
+	&sensor_dev_attr_in1_label.dev_attr.attr,
+	&sensor_dev_attr_in2_input.dev_attr.attr,
+	&sensor_dev_attr_in2_label.dev_attr.attr,
+	&sensor_dev_attr_in3_input.dev_attr.attr,
+	&sensor_dev_attr_in3_label.dev_attr.attr,
+
+	&sensor_dev_attr_temp1_input.dev_attr.attr,
+	&sensor_dev_attr_temp1_label.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group da9055_attr_group = {.attrs = da9055_attr};
+
+static int da9055_hwmon_probe(struct platform_device *pdev)
+{
+	struct da9055_hwmon *hwmon;
+	int hwmon_irq, ret;
+
+	hwmon = devm_kzalloc(&pdev->dev, sizeof(struct da9055_hwmon),
+			     GFP_KERNEL);
+	if (!hwmon)
+		return -ENOMEM;
+
+	mutex_init(&hwmon->hwmon_lock);
+	mutex_init(&hwmon->irq_lock);
+
+	init_completion(&hwmon->done);
+	hwmon->da9055 = dev_get_drvdata(pdev->dev.parent);
+
+	platform_set_drvdata(pdev, hwmon);
+
+	hwmon_irq = platform_get_irq_byname(pdev, "HWMON");
+	if (hwmon_irq < 0)
+		return hwmon_irq;
+
+	hwmon_irq = regmap_irq_get_virq(hwmon->da9055->irq_data, hwmon_irq);
+	if (hwmon_irq < 0)
+		return hwmon_irq;
+
+	ret = devm_request_threaded_irq(&pdev->dev, hwmon_irq,
+					NULL, da9055_auxadc_irq,
+					IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
+					"adc-irq", hwmon);
+	if (ret != 0) {
+		dev_err(hwmon->da9055->dev, "DA9055 ADC IRQ failed ret=%d\n",
+			ret);
+		return ret;
+	}
+
+	ret = sysfs_create_group(&pdev->dev.kobj, &da9055_attr_group);
+	if (ret)
+		return ret;
+
+	hwmon->class_device = hwmon_device_register(&pdev->dev);
+	if (IS_ERR(hwmon->class_device)) {
+		ret = PTR_ERR(hwmon->class_device);
+		goto err;
+	}
+
+	return 0;
+
+err:
+	sysfs_remove_group(&pdev->dev.kobj, &da9055_attr_group);
+	return ret;
+}
+
+static int da9055_hwmon_remove(struct platform_device *pdev)
+{
+	struct da9055_hwmon *hwmon = platform_get_drvdata(pdev);
+
+	sysfs_remove_group(&pdev->dev.kobj, &da9055_attr_group);
+	hwmon_device_unregister(hwmon->class_device);
+
+	return 0;
+}
+
+static struct platform_driver da9055_hwmon_driver = {
+	.probe = da9055_hwmon_probe,
+	.remove = da9055_hwmon_remove,
+	.driver = {
+		.name = "da9055-hwmon",
+		.owner = THIS_MODULE,
+	},
+};
+
+module_platform_driver(da9055_hwmon_driver);
+
+MODULE_AUTHOR("David Dajun Chen <dchen@diasemi.com>");
+MODULE_DESCRIPTION("DA9055 HWMON driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:da9055-hwmon");
diff --git a/drivers/hwmon/fam15h_power.c b/drivers/hwmon/fam15h_power.c
index 5cec685..b757088 100644
--- a/drivers/hwmon/fam15h_power.c
+++ b/drivers/hwmon/fam15h_power.c
@@ -31,6 +31,9 @@
 MODULE_AUTHOR("Andreas Herrmann <herrmann.der.user@googlemail.com>");
 MODULE_LICENSE("GPL");
 
+/* Family 16h Northbridge's function 4 PCI ID */
+#define PCI_DEVICE_ID_AMD_16H_NB_F4	0x1534
+
 /* D18F3 */
 #define REG_NORTHBRIDGE_CAP		0xe8
 
@@ -248,6 +251,7 @@
 
 static DEFINE_PCI_DEVICE_TABLE(fam15h_power_id_table) = {
 	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_NB_F4) },
+	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_16H_NB_F4) },
 	{}
 };
 MODULE_DEVICE_TABLE(pci, fam15h_power_id_table);
diff --git a/drivers/hwmon/ina2xx.c b/drivers/hwmon/ina2xx.c
index 2b72634..8e7158c 100644
--- a/drivers/hwmon/ina2xx.c
+++ b/drivers/hwmon/ina2xx.c
@@ -302,19 +302,8 @@
 	.id_table	= ina2xx_id,
 };
 
-static int __init ina2xx_init(void)
-{
-	return i2c_add_driver(&ina2xx_driver);
-}
-
-static void __exit ina2xx_exit(void)
-{
-	i2c_del_driver(&ina2xx_driver);
-}
+module_i2c_driver(ina2xx_driver);
 
 MODULE_AUTHOR("Lothar Felten <l-felten@ti.com>");
 MODULE_DESCRIPTION("ina2xx driver");
 MODULE_LICENSE("GPL");
-
-module_init(ina2xx_init);
-module_exit(ina2xx_exit);
diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
index aa59a25..c02bf20 100644
--- a/drivers/i2c/busses/i2c-at91.c
+++ b/drivers/i2c/busses/i2c-at91.c
@@ -39,6 +39,7 @@
 #define	AT91_TWI_STOP		0x0002	/* Send a Stop Condition */
 #define	AT91_TWI_MSEN		0x0004	/* Master Transfer Enable */
 #define	AT91_TWI_SVDIS		0x0020	/* Slave Transfer Disable */
+#define	AT91_TWI_QUICK		0x0040	/* SMBus quick command */
 #define	AT91_TWI_SWRST		0x0080	/* Software Reset */
 
 #define	AT91_TWI_MMR		0x0004	/* Master Mode Register */
@@ -212,7 +213,11 @@
 
 	INIT_COMPLETION(dev->cmd_complete);
 	dev->transfer_status = 0;
-	if (dev->msg->flags & I2C_M_RD) {
+
+	if (!dev->buf_len) {
+		at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_QUICK);
+		at91_twi_write(dev, AT91_TWI_IER, AT91_TWI_TXCOMP);
+	} else if (dev->msg->flags & I2C_M_RD) {
 		unsigned start_flags = AT91_TWI_START;
 
 		if (at91_twi_read(dev, AT91_TWI_SR) & AT91_TWI_RXRDY) {
diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c
index 286ca19..0670da7 100644
--- a/drivers/i2c/busses/i2c-mxs.c
+++ b/drivers/i2c/busses/i2c-mxs.c
@@ -287,12 +287,14 @@
 select_init_dma_fail:
 	dma_unmap_sg(i2c->dev, &i2c->sg_io[0], 1, DMA_TO_DEVICE);
 select_init_pio_fail:
+	dmaengine_terminate_all(i2c->dmach);
 	return -EINVAL;
 
 /* Write failpath. */
 write_init_dma_fail:
 	dma_unmap_sg(i2c->dev, i2c->sg_io, 2, DMA_TO_DEVICE);
 write_init_pio_fail:
+	dmaengine_terminate_all(i2c->dmach);
 	return -EINVAL;
 }
 
diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
index bffd550..15da1ac 100644
--- a/drivers/i2c/busses/i2c-ocores.c
+++ b/drivers/i2c/busses/i2c-ocores.c
@@ -9,10 +9,6 @@
  * kind, whether express or implied.
  */
 
-/*
- * This driver can be used from the device tree, see
- *     Documentation/devicetree/bindings/i2c/ocore-i2c.txt
- */
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index db31eae..3525c9e 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -43,7 +43,6 @@
 #include <linux/slab.h>
 #include <linux/i2c-omap.h>
 #include <linux/pm_runtime.h>
-#include <linux/pm_qos.h>
 
 /* I2C controller revisions */
 #define OMAP_I2C_OMAP1_REV_2		0x20
@@ -187,8 +186,9 @@
 	int			reg_shift;      /* bit shift for I2C register addresses */
 	struct completion	cmd_complete;
 	struct resource		*ioarea;
-	u32			latency;	/* maximum MPU wkup latency */
-	struct pm_qos_request	pm_qos_request;
+	u32			latency;	/* maximum mpu wkup latency */
+	void			(*set_mpu_wkup_lat)(struct device *dev,
+						    long latency);
 	u32			speed;		/* Speed of bus in kHz */
 	u32			dtrev;		/* extra revision from DT */
 	u32			flags;
@@ -494,7 +494,9 @@
 		dev->b_hw = 1; /* Enable hardware fixes */
 
 	/* calculate wakeup latency constraint for MPU */
-	dev->latency = (1000000 * dev->threshold) / (1000 * dev->speed / 8);
+	if (dev->set_mpu_wkup_lat != NULL)
+		dev->latency = (1000000 * dev->threshold) /
+			(1000 * dev->speed / 8);
 }
 
 /*
@@ -522,6 +524,9 @@
 	dev->buf = msg->buf;
 	dev->buf_len = msg->len;
 
+	/* make sure writes to dev->buf_len are ordered */
+	barrier();
+
 	omap_i2c_write_reg(dev, OMAP_I2C_CNT_REG, dev->buf_len);
 
 	/* Clear the FIFO Buffers */
@@ -579,7 +584,6 @@
 	 */
 	timeout = wait_for_completion_timeout(&dev->cmd_complete,
 						OMAP_I2C_TIMEOUT);
-	dev->buf_len = 0;
 	if (timeout == 0) {
 		dev_err(dev->dev, "controller timed out\n");
 		omap_i2c_init(dev);
@@ -629,16 +633,8 @@
 	if (r < 0)
 		goto out;
 
-	/*
-	 * When waiting for completion of a i2c transfer, we need to
-	 * set a wake up latency constraint for the MPU. This is to
-	 * ensure quick enough wakeup from idle, when transfer
-	 * completes.
-	 */
-	if (dev->latency)
-		pm_qos_add_request(&dev->pm_qos_request,
-				   PM_QOS_CPU_DMA_LATENCY,
-				   dev->latency);
+	if (dev->set_mpu_wkup_lat != NULL)
+		dev->set_mpu_wkup_lat(dev->dev, dev->latency);
 
 	for (i = 0; i < num; i++) {
 		r = omap_i2c_xfer_msg(adap, &msgs[i], (i == (num - 1)));
@@ -646,8 +642,8 @@
 			break;
 	}
 
-	if (dev->latency)
-		pm_qos_remove_request(&dev->pm_qos_request);
+	if (dev->set_mpu_wkup_lat != NULL)
+		dev->set_mpu_wkup_lat(dev->dev, -1);
 
 	if (r == 0)
 		r = num;
@@ -1104,6 +1100,7 @@
 	} else if (pdata != NULL) {
 		dev->speed = pdata->clkrate;
 		dev->flags = pdata->flags;
+		dev->set_mpu_wkup_lat = pdata->set_mpu_wkup_lat;
 		dev->dtrev = pdata->rev;
 	}
 
@@ -1159,8 +1156,9 @@
 			dev->b_hw = 1; /* Enable hardware fixes */
 
 		/* calculate wakeup latency constraint for MPU */
-		dev->latency = (1000000 * dev->fifo_size) /
-			       (1000 * dev->speed / 8);
+		if (dev->set_mpu_wkup_lat != NULL)
+			dev->latency = (1000000 * dev->fifo_size) /
+				       (1000 * dev->speed / 8);
 	}
 
 	/* reset ASAP, clearing any IRQs */
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 3e0335f..9d90272 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -806,6 +806,7 @@
 			dev_err(i2c->dev, "invalid gpio[%d]: %d\n", idx, gpio);
 			goto free_gpio;
 		}
+		i2c->gpios[idx] = gpio;
 
 		ret = gpio_request(gpio, "i2c-bus");
 		if (ret) {
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index a7edf98..e388590 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -39,6 +39,7 @@
 #include <linux/irqflags.h>
 #include <linux/rwsem.h>
 #include <linux/pm_runtime.h>
+#include <linux/acpi.h>
 #include <asm/uaccess.h>
 
 #include "i2c-core.h"
@@ -78,6 +79,10 @@
 	if (of_driver_match_device(dev, drv))
 		return 1;
 
+	/* Then ACPI style match */
+	if (acpi_driver_match_device(dev, drv))
+		return 1;
+
 	driver = to_i2c_driver(drv);
 	/* match on an id table if there is one */
 	if (driver->id_table)
@@ -539,6 +544,7 @@
 	client->dev.bus = &i2c_bus_type;
 	client->dev.type = &i2c_client_type;
 	client->dev.of_node = info->of_node;
+	ACPI_HANDLE_SET(&client->dev, info->acpi_node.handle);
 
 	/* For 10-bit clients, add an arbitrary offset to avoid collisions */
 	dev_set_name(&client->dev, "%d-%04x", i2c_adapter_id(adap),
diff --git a/drivers/i2c/muxes/i2c-mux-pinctrl.c b/drivers/i2c/muxes/i2c-mux-pinctrl.c
index 5f097f3..7fa5b24 100644
--- a/drivers/i2c/muxes/i2c-mux-pinctrl.c
+++ b/drivers/i2c/muxes/i2c-mux-pinctrl.c
@@ -169,7 +169,7 @@
 	mux->busses = devm_kzalloc(&pdev->dev,
 				   sizeof(mux->busses) * mux->pdata->bus_count,
 				   GFP_KERNEL);
-	if (!mux->states) {
+	if (!mux->busses) {
 		dev_err(&pdev->dev, "Cannot allocate busses\n");
 		ret = -ENOMEM;
 		goto err;
diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c
index b0f6b4c..c49c04d 100644
--- a/drivers/idle/intel_idle.c
+++ b/drivers/idle/intel_idle.c
@@ -56,7 +56,6 @@
 #include <linux/kernel.h>
 #include <linux/cpuidle.h>
 #include <linux/clockchips.h>
-#include <linux/hrtimer.h>	/* ktime_get_real() */
 #include <trace/events/power.h>
 #include <linux/sched.h>
 #include <linux/notifier.h>
@@ -72,6 +71,7 @@
 static struct cpuidle_driver intel_idle_driver = {
 	.name = "intel_idle",
 	.owner = THIS_MODULE,
+	.en_core_tk_irqen = 1,
 };
 /* intel_idle.max_cstate=0 disables driver */
 static int max_cstate = MWAIT_MAX_NUM_CSTATES - 1;
@@ -281,8 +281,6 @@
 	struct cpuidle_state_usage *state_usage = &dev->states_usage[index];
 	unsigned long eax = (unsigned long)cpuidle_get_statedata(state_usage);
 	unsigned int cstate;
-	ktime_t kt_before, kt_after;
-	s64 usec_delta;
 	int cpu = smp_processor_id();
 
 	cstate = (((eax) >> MWAIT_SUBSTATE_SIZE) & MWAIT_CSTATE_MASK) + 1;
@@ -297,8 +295,6 @@
 	if (!(lapic_timer_reliable_states & (1 << (cstate))))
 		clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu);
 
-	kt_before = ktime_get_real();
-
 	stop_critical_timings();
 	if (!need_resched()) {
 
@@ -310,17 +306,9 @@
 
 	start_critical_timings();
 
-	kt_after = ktime_get_real();
-	usec_delta = ktime_to_us(ktime_sub(kt_after, kt_before));
-
-	local_irq_enable();
-
 	if (!(lapic_timer_reliable_states & (1 << (cstate))))
 		clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu);
 
-	/* Update cpuidle counters */
-	dev->last_residency = (int)usec_delta;
-
 	return index;
 }
 
diff --git a/drivers/input/input-mt.c b/drivers/input/input-mt.c
index c0ec7d4..1abbc17 100644
--- a/drivers/input/input-mt.c
+++ b/drivers/input/input-mt.c
@@ -26,10 +26,14 @@
  * input_mt_init_slots() - initialize MT input slots
  * @dev: input device supporting MT events and finger tracking
  * @num_slots: number of slots used by the device
+ * @flags: mt tasks to handle in core
  *
  * This function allocates all necessary memory for MT slot handling
  * in the input device, prepares the ABS_MT_SLOT and
  * ABS_MT_TRACKING_ID events for use and sets up appropriate buffers.
+ * Depending on the flags set, it also performs pointer emulation and
+ * frame synchronization.
+ *
  * May be called repeatedly. Returns -EINVAL if attempting to
  * reinitialize with a different number of slots.
  */
diff --git a/drivers/input/matrix-keymap.c b/drivers/input/matrix-keymap.c
index 443ad64b..d88d9be 100644
--- a/drivers/input/matrix-keymap.c
+++ b/drivers/input/matrix-keymap.c
@@ -23,6 +23,7 @@
 #include <linux/input.h>
 #include <linux/of.h>
 #include <linux/export.h>
+#include <linux/module.h>
 #include <linux/input/matrix_keypad.h>
 
 static bool matrix_keypad_map_key(struct input_dev *input_dev,
@@ -161,3 +162,5 @@
 	return 0;
 }
 EXPORT_SYMBOL(matrix_keypad_build_keymap);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/mousedev.c b/drivers/input/mousedev.c
index 8f02e3d..4c842c3 100644
--- a/drivers/input/mousedev.c
+++ b/drivers/input/mousedev.c
@@ -12,8 +12,8 @@
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #define MOUSEDEV_MINOR_BASE	32
-#define MOUSEDEV_MINORS		32
-#define MOUSEDEV_MIX		31
+#define MOUSEDEV_MINORS		31
+#define MOUSEDEV_MIX		63
 
 #include <linux/sched.h>
 #include <linux/slab.h>
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index f02028e..78e5d9a 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -955,7 +955,8 @@
 
 static SIMPLE_DEV_PM_OPS(ads7846_pm, ads7846_suspend, ads7846_resume);
 
-static int __devinit ads7846_setup_pendown(struct spi_device *spi, struct ads7846 *ts)
+static int __devinit ads7846_setup_pendown(struct spi_device *spi,
+					   struct ads7846 *ts)
 {
 	struct ads7846_platform_data *pdata = spi->dev.platform_data;
 	int err;
@@ -981,6 +982,9 @@
 
 		ts->gpio_pendown = pdata->gpio_pendown;
 
+		if (pdata->gpio_pendown_debounce)
+			gpio_set_debounce(pdata->gpio_pendown,
+					  pdata->gpio_pendown_debounce);
 	} else {
 		dev_err(&spi->dev, "no get_pendown_state nor gpio_pendown?\n");
 		return -EINVAL;
diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c
index d4a4cd4..0badfa4 100644
--- a/drivers/iommu/intel-iommu.c
+++ b/drivers/iommu/intel-iommu.c
@@ -4108,7 +4108,7 @@
 static int intel_iommu_add_device(struct device *dev)
 {
 	struct pci_dev *pdev = to_pci_dev(dev);
-	struct pci_dev *bridge, *dma_pdev;
+	struct pci_dev *bridge, *dma_pdev = NULL;
 	struct iommu_group *group;
 	int ret;
 
@@ -4122,7 +4122,7 @@
 			dma_pdev = pci_get_domain_bus_and_slot(
 						pci_domain_nr(pdev->bus),
 						bridge->subordinate->number, 0);
-		else
+		if (!dma_pdev)
 			dma_pdev = pci_dev_get(bridge);
 	} else
 		dma_pdev = pci_dev_get(pdev);
diff --git a/drivers/iommu/tegra-smmu.c b/drivers/iommu/tegra-smmu.c
index a649f14..c0f7a42 100644
--- a/drivers/iommu/tegra-smmu.c
+++ b/drivers/iommu/tegra-smmu.c
@@ -1054,6 +1054,7 @@
 			stats[i], val, offs);
 	}
 	seq_printf(s, "\n");
+	dput(dent);
 
 	return 0;
 }
diff --git a/drivers/irqchip/irq-bcm2835.c b/drivers/irqchip/irq-bcm2835.c
index dc670cc..16c78f1 100644
--- a/drivers/irqchip/irq-bcm2835.c
+++ b/drivers/irqchip/irq-bcm2835.c
@@ -168,7 +168,8 @@
 }
 
 static struct of_device_id irq_of_match[] __initconst = {
-	{ .compatible = "brcm,bcm2835-armctrl-ic", .data = armctrl_of_init }
+	{ .compatible = "brcm,bcm2835-armctrl-ic", .data = armctrl_of_init },
+	{ }
 };
 
 void __init bcm2835_init_irq(void)
diff --git a/drivers/leds/ledtrig-cpu.c b/drivers/leds/ledtrig-cpu.c
index b312056..4239b39 100644
--- a/drivers/leds/ledtrig-cpu.c
+++ b/drivers/leds/ledtrig-cpu.c
@@ -33,8 +33,6 @@
 struct led_trigger_cpu {
 	char name[MAX_NAME_LEN];
 	struct led_trigger *_trig;
-	struct mutex lock;
-	int lock_is_inited;
 };
 
 static DEFINE_PER_CPU(struct led_trigger_cpu, cpu_trig);
@@ -50,12 +48,6 @@
 {
 	struct led_trigger_cpu *trig = &__get_cpu_var(cpu_trig);
 
-	/* mutex lock should be initialized before calling mutex_call() */
-	if (!trig->lock_is_inited)
-		return;
-
-	mutex_lock(&trig->lock);
-
 	/* Locate the correct CPU LED */
 	switch (ledevt) {
 	case CPU_LED_IDLE_END:
@@ -75,8 +67,6 @@
 		/* Will leave the LED as it is */
 		break;
 	}
-
-	mutex_unlock(&trig->lock);
 }
 EXPORT_SYMBOL(ledtrig_cpu);
 
@@ -117,14 +107,9 @@
 	for_each_possible_cpu(cpu) {
 		struct led_trigger_cpu *trig = &per_cpu(cpu_trig, cpu);
 
-		mutex_init(&trig->lock);
-
 		snprintf(trig->name, MAX_NAME_LEN, "cpu%d", cpu);
 
-		mutex_lock(&trig->lock);
 		led_trigger_register_simple(trig->name, &trig->_trig);
-		trig->lock_is_inited = 1;
-		mutex_unlock(&trig->lock);
 	}
 
 	register_syscore_ops(&ledtrig_cpu_syscore_ops);
@@ -142,15 +127,9 @@
 	for_each_possible_cpu(cpu) {
 		struct led_trigger_cpu *trig = &per_cpu(cpu_trig, cpu);
 
-		mutex_lock(&trig->lock);
-
 		led_trigger_unregister_simple(trig->_trig);
 		trig->_trig = NULL;
 		memset(trig->name, 0, MAX_NAME_LEN);
-		trig->lock_is_inited = 0;
-
-		mutex_unlock(&trig->lock);
-		mutex_destroy(&trig->lock);
 	}
 
 	unregister_syscore_ops(&ledtrig_cpu_syscore_ops);
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 02db9183..77e6eff 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -740,8 +740,14 @@
 	if (!md_in_flight(md))
 		wake_up(&md->wait);
 
+	/*
+	 * Run this off this callpath, as drivers could invoke end_io while
+	 * inside their request_fn (and holding the queue lock). Calling
+	 * back into ->request_fn() could deadlock attempting to grab the
+	 * queue lock again.
+	 */
 	if (run_queue)
-		blk_run_queue(md->queue);
+		blk_run_queue_async(md->queue);
 
 	/*
 	 * dm_put() must be at the end of this function. See the comment above
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 9ab768a..6120071 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -1817,10 +1817,10 @@
 			memset(bbp, 0xff, PAGE_SIZE);
 
 			for (i = 0 ; i < bb->count ; i++) {
-				u64 internal_bb = *p++;
+				u64 internal_bb = p[i];
 				u64 store_bb = ((BB_OFFSET(internal_bb) << 10)
 						| BB_LEN(internal_bb));
-				*bbp++ = cpu_to_le64(store_bb);
+				bbp[i] = cpu_to_le64(store_bb);
 			}
 			bb->changed = 0;
 			if (read_seqretry(&bb->lock, seq))
@@ -5294,7 +5294,7 @@
 }
 EXPORT_SYMBOL_GPL(md_stop_writes);
 
-void md_stop(struct mddev *mddev)
+static void __md_stop(struct mddev *mddev)
 {
 	mddev->ready = 0;
 	mddev->pers->stop(mddev);
@@ -5304,6 +5304,18 @@
 	mddev->pers = NULL;
 	clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
 }
+
+void md_stop(struct mddev *mddev)
+{
+	/* stop the array and free an attached data structures.
+	 * This is called from dm-raid
+	 */
+	__md_stop(mddev);
+	bitmap_destroy(mddev);
+	if (mddev->bio_set)
+		bioset_free(mddev->bio_set);
+}
+
 EXPORT_SYMBOL_GPL(md_stop);
 
 static int md_set_readonly(struct mddev *mddev, struct block_device *bdev)
@@ -5364,7 +5376,7 @@
 			set_disk_ro(disk, 0);
 
 		__md_stop_writes(mddev);
-		md_stop(mddev);
+		__md_stop(mddev);
 		mddev->queue->merge_bvec_fn = NULL;
 		mddev->queue->backing_dev_info.congested_fn = NULL;
 
@@ -7936,9 +7948,9 @@
 		   sector_t *first_bad, int *bad_sectors)
 {
 	int hi;
-	int lo = 0;
+	int lo;
 	u64 *p = bb->page;
-	int rv = 0;
+	int rv;
 	sector_t target = s + sectors;
 	unsigned seq;
 
@@ -7953,7 +7965,8 @@
 
 retry:
 	seq = read_seqbegin(&bb->lock);
-
+	lo = 0;
+	rv = 0;
 	hi = bb->count;
 
 	/* Binary search between lo and hi for 'target'
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 636bae0..a0f7309 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -963,7 +963,7 @@
 	struct r1conf *conf = mddev->private;
 	struct bio *bio;
 
-	if (from_schedule) {
+	if (from_schedule || current->bio_list) {
 		spin_lock_irq(&conf->device_lock);
 		bio_list_merge(&conf->pending_bio_list, &plug->pending);
 		conf->pending_count += plug->pending_cnt;
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index d1295af..c9acbd7 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -499,7 +499,7 @@
 	 */
 	one_write_done(r10_bio);
 	if (dec_rdev)
-		rdev_dec_pending(conf->mirrors[dev].rdev, conf->mddev);
+		rdev_dec_pending(rdev, conf->mddev);
 }
 
 /*
@@ -1069,7 +1069,7 @@
 	struct r10conf *conf = mddev->private;
 	struct bio *bio;
 
-	if (from_schedule) {
+	if (from_schedule || current->bio_list) {
 		spin_lock_irq(&conf->device_lock);
 		bio_list_merge(&conf->pending_bio_list, &plug->pending);
 		conf->pending_count += plug->pending_cnt;
@@ -1334,18 +1334,21 @@
 			blocked_rdev = rrdev;
 			break;
 		}
+		if (rdev && (test_bit(Faulty, &rdev->flags)
+			     || test_bit(Unmerged, &rdev->flags)))
+			rdev = NULL;
 		if (rrdev && (test_bit(Faulty, &rrdev->flags)
 			      || test_bit(Unmerged, &rrdev->flags)))
 			rrdev = NULL;
 
 		r10_bio->devs[i].bio = NULL;
 		r10_bio->devs[i].repl_bio = NULL;
-		if (!rdev || test_bit(Faulty, &rdev->flags) ||
-		    test_bit(Unmerged, &rdev->flags)) {
+
+		if (!rdev && !rrdev) {
 			set_bit(R10BIO_Degraded, &r10_bio->state);
 			continue;
 		}
-		if (test_bit(WriteErrorSeen, &rdev->flags)) {
+		if (rdev && test_bit(WriteErrorSeen, &rdev->flags)) {
 			sector_t first_bad;
 			sector_t dev_sector = r10_bio->devs[i].addr;
 			int bad_sectors;
@@ -1387,8 +1390,10 @@
 					max_sectors = good_sectors;
 			}
 		}
-		r10_bio->devs[i].bio = bio;
-		atomic_inc(&rdev->nr_pending);
+		if (rdev) {
+			r10_bio->devs[i].bio = bio;
+			atomic_inc(&rdev->nr_pending);
+		}
 		if (rrdev) {
 			r10_bio->devs[i].repl_bio = bio;
 			atomic_inc(&rrdev->nr_pending);
@@ -1444,69 +1449,71 @@
 	for (i = 0; i < conf->copies; i++) {
 		struct bio *mbio;
 		int d = r10_bio->devs[i].devnum;
-		if (!r10_bio->devs[i].bio)
-			continue;
+		if (r10_bio->devs[i].bio) {
+			struct md_rdev *rdev = conf->mirrors[d].rdev;
+			mbio = bio_clone_mddev(bio, GFP_NOIO, mddev);
+			md_trim_bio(mbio, r10_bio->sector - bio->bi_sector,
+				    max_sectors);
+			r10_bio->devs[i].bio = mbio;
 
-		mbio = bio_clone_mddev(bio, GFP_NOIO, mddev);
-		md_trim_bio(mbio, r10_bio->sector - bio->bi_sector,
-			    max_sectors);
-		r10_bio->devs[i].bio = mbio;
+			mbio->bi_sector	= (r10_bio->devs[i].addr+
+					   choose_data_offset(r10_bio,
+							      rdev));
+			mbio->bi_bdev = rdev->bdev;
+			mbio->bi_end_io	= raid10_end_write_request;
+			mbio->bi_rw = WRITE | do_sync | do_fua | do_discard;
+			mbio->bi_private = r10_bio;
 
-		mbio->bi_sector	= (r10_bio->devs[i].addr+
-				   choose_data_offset(r10_bio,
-						      conf->mirrors[d].rdev));
-		mbio->bi_bdev = conf->mirrors[d].rdev->bdev;
-		mbio->bi_end_io	= raid10_end_write_request;
-		mbio->bi_rw = WRITE | do_sync | do_fua | do_discard;
-		mbio->bi_private = r10_bio;
+			atomic_inc(&r10_bio->remaining);
 
-		atomic_inc(&r10_bio->remaining);
+			cb = blk_check_plugged(raid10_unplug, mddev,
+					       sizeof(*plug));
+			if (cb)
+				plug = container_of(cb, struct raid10_plug_cb,
+						    cb);
+			else
+				plug = NULL;
+			spin_lock_irqsave(&conf->device_lock, flags);
+			if (plug) {
+				bio_list_add(&plug->pending, mbio);
+				plug->pending_cnt++;
+			} else {
+				bio_list_add(&conf->pending_bio_list, mbio);
+				conf->pending_count++;
+			}
+			spin_unlock_irqrestore(&conf->device_lock, flags);
+			if (!plug)
+				md_wakeup_thread(mddev->thread);
+		}
 
-		cb = blk_check_plugged(raid10_unplug, mddev, sizeof(*plug));
-		if (cb)
-			plug = container_of(cb, struct raid10_plug_cb, cb);
-		else
-			plug = NULL;
-		spin_lock_irqsave(&conf->device_lock, flags);
-		if (plug) {
-			bio_list_add(&plug->pending, mbio);
-			plug->pending_cnt++;
-		} else {
+		if (r10_bio->devs[i].repl_bio) {
+			struct md_rdev *rdev = conf->mirrors[d].replacement;
+			if (rdev == NULL) {
+				/* Replacement just got moved to main 'rdev' */
+				smp_mb();
+				rdev = conf->mirrors[d].rdev;
+			}
+			mbio = bio_clone_mddev(bio, GFP_NOIO, mddev);
+			md_trim_bio(mbio, r10_bio->sector - bio->bi_sector,
+				    max_sectors);
+			r10_bio->devs[i].repl_bio = mbio;
+
+			mbio->bi_sector	= (r10_bio->devs[i].addr +
+					   choose_data_offset(
+						   r10_bio, rdev));
+			mbio->bi_bdev = rdev->bdev;
+			mbio->bi_end_io	= raid10_end_write_request;
+			mbio->bi_rw = WRITE | do_sync | do_fua | do_discard;
+			mbio->bi_private = r10_bio;
+
+			atomic_inc(&r10_bio->remaining);
+			spin_lock_irqsave(&conf->device_lock, flags);
 			bio_list_add(&conf->pending_bio_list, mbio);
 			conf->pending_count++;
+			spin_unlock_irqrestore(&conf->device_lock, flags);
+			if (!mddev_check_plugged(mddev))
+				md_wakeup_thread(mddev->thread);
 		}
-		spin_unlock_irqrestore(&conf->device_lock, flags);
-		if (!plug)
-			md_wakeup_thread(mddev->thread);
-
-		if (!r10_bio->devs[i].repl_bio)
-			continue;
-
-		mbio = bio_clone_mddev(bio, GFP_NOIO, mddev);
-		md_trim_bio(mbio, r10_bio->sector - bio->bi_sector,
-			    max_sectors);
-		r10_bio->devs[i].repl_bio = mbio;
-
-		/* We are actively writing to the original device
-		 * so it cannot disappear, so the replacement cannot
-		 * become NULL here
-		 */
-		mbio->bi_sector	= (r10_bio->devs[i].addr +
-				   choose_data_offset(
-					   r10_bio,
-					   conf->mirrors[d].replacement));
-		mbio->bi_bdev = conf->mirrors[d].replacement->bdev;
-		mbio->bi_end_io	= raid10_end_write_request;
-		mbio->bi_rw = WRITE | do_sync | do_fua | do_discard;
-		mbio->bi_private = r10_bio;
-
-		atomic_inc(&r10_bio->remaining);
-		spin_lock_irqsave(&conf->device_lock, flags);
-		bio_list_add(&conf->pending_bio_list, mbio);
-		conf->pending_count++;
-		spin_unlock_irqrestore(&conf->device_lock, flags);
-		if (!mddev_check_plugged(mddev))
-			md_wakeup_thread(mddev->thread);
 	}
 
 	/* Don't remove the bias on 'remaining' (one_write_done) until
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index c5439dc..a450268 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -2774,10 +2774,12 @@
 			dev = &sh->dev[i];
 			if (!test_bit(R5_LOCKED, &dev->flags) &&
 			    (test_bit(R5_UPTODATE, &dev->flags) ||
-			     test_and_clear_bit(R5_Discard, &dev->flags))) {
+			     test_bit(R5_Discard, &dev->flags))) {
 				/* We can return any write requests */
 				struct bio *wbi, *wbi2;
 				pr_debug("Return write for disc %d\n", i);
+				if (test_and_clear_bit(R5_Discard, &dev->flags))
+					clear_bit(R5_UPTODATE, &dev->flags);
 				wbi = dev->written;
 				dev->written = NULL;
 				while (wbi && wbi->bi_sector <
@@ -2795,7 +2797,8 @@
 					 !test_bit(STRIPE_DEGRADED, &sh->state),
 						0);
 			}
-		}
+		} else if (test_bit(R5_Discard, &sh->dev[i].flags))
+			clear_bit(R5_Discard, &sh->dev[i].flags);
 
 	if (test_and_clear_bit(STRIPE_FULL_WRITE, &sh->state))
 		if (atomic_dec_and_test(&conf->pending_full_writes))
@@ -3490,40 +3493,6 @@
 			handle_failed_sync(conf, sh, &s);
 	}
 
-	/*
-	 * might be able to return some write requests if the parity blocks
-	 * are safe, or on a failed drive
-	 */
-	pdev = &sh->dev[sh->pd_idx];
-	s.p_failed = (s.failed >= 1 && s.failed_num[0] == sh->pd_idx)
-		|| (s.failed >= 2 && s.failed_num[1] == sh->pd_idx);
-	qdev = &sh->dev[sh->qd_idx];
-	s.q_failed = (s.failed >= 1 && s.failed_num[0] == sh->qd_idx)
-		|| (s.failed >= 2 && s.failed_num[1] == sh->qd_idx)
-		|| conf->level < 6;
-
-	if (s.written &&
-	    (s.p_failed || ((test_bit(R5_Insync, &pdev->flags)
-			     && !test_bit(R5_LOCKED, &pdev->flags)
-			     && (test_bit(R5_UPTODATE, &pdev->flags) ||
-				 test_bit(R5_Discard, &pdev->flags))))) &&
-	    (s.q_failed || ((test_bit(R5_Insync, &qdev->flags)
-			     && !test_bit(R5_LOCKED, &qdev->flags)
-			     && (test_bit(R5_UPTODATE, &qdev->flags) ||
-				 test_bit(R5_Discard, &qdev->flags))))))
-		handle_stripe_clean_event(conf, sh, disks, &s.return_bi);
-
-	/* Now we might consider reading some blocks, either to check/generate
-	 * parity, or to satisfy requests
-	 * or to load a block that is being partially written.
-	 */
-	if (s.to_read || s.non_overwrite
-	    || (conf->level == 6 && s.to_write && s.failed)
-	    || (s.syncing && (s.uptodate + s.compute < disks))
-	    || s.replacing
-	    || s.expanding)
-		handle_stripe_fill(sh, &s, disks);
-
 	/* Now we check to see if any write operations have recently
 	 * completed
 	 */
@@ -3561,6 +3530,40 @@
 			s.dec_preread_active = 1;
 	}
 
+	/*
+	 * might be able to return some write requests if the parity blocks
+	 * are safe, or on a failed drive
+	 */
+	pdev = &sh->dev[sh->pd_idx];
+	s.p_failed = (s.failed >= 1 && s.failed_num[0] == sh->pd_idx)
+		|| (s.failed >= 2 && s.failed_num[1] == sh->pd_idx);
+	qdev = &sh->dev[sh->qd_idx];
+	s.q_failed = (s.failed >= 1 && s.failed_num[0] == sh->qd_idx)
+		|| (s.failed >= 2 && s.failed_num[1] == sh->qd_idx)
+		|| conf->level < 6;
+
+	if (s.written &&
+	    (s.p_failed || ((test_bit(R5_Insync, &pdev->flags)
+			     && !test_bit(R5_LOCKED, &pdev->flags)
+			     && (test_bit(R5_UPTODATE, &pdev->flags) ||
+				 test_bit(R5_Discard, &pdev->flags))))) &&
+	    (s.q_failed || ((test_bit(R5_Insync, &qdev->flags)
+			     && !test_bit(R5_LOCKED, &qdev->flags)
+			     && (test_bit(R5_UPTODATE, &qdev->flags) ||
+				 test_bit(R5_Discard, &qdev->flags))))))
+		handle_stripe_clean_event(conf, sh, disks, &s.return_bi);
+
+	/* Now we might consider reading some blocks, either to check/generate
+	 * parity, or to satisfy requests
+	 * or to load a block that is being partially written.
+	 */
+	if (s.to_read || s.non_overwrite
+	    || (conf->level == 6 && s.to_write && s.failed)
+	    || (s.syncing && (s.uptodate + s.compute < disks))
+	    || s.replacing
+	    || s.expanding)
+		handle_stripe_fill(sh, &s, disks);
+
 	/* Now to consider new write requests and what else, if anything
 	 * should be read.  We do not handle new writes when:
 	 * 1/ A 'write' operation (copy+xor) is already in flight.
@@ -5529,6 +5532,10 @@
 		 * discard data disk but write parity disk
 		 */
 		stripe = stripe * PAGE_SIZE;
+		/* Round up to power of 2, as discard handling
+		 * currently assumes that */
+		while ((stripe-1) & stripe)
+			stripe = (stripe | (stripe-1)) + 1;
 		mddev->queue->limits.discard_alignment = stripe;
 		mddev->queue->limits.discard_granularity = stripe;
 		/*
diff --git a/drivers/media/dvb-frontends/stv0900_core.c b/drivers/media/dvb-frontends/stv0900_core.c
index 262dfa5..b551ca3 100644
--- a/drivers/media/dvb-frontends/stv0900_core.c
+++ b/drivers/media/dvb-frontends/stv0900_core.c
@@ -300,15 +300,15 @@
 {
 	u32 m_div, clk_sel;
 
-	dprintk("%s: Mclk set to %d, Quartz = %d\n", __func__, mclk,
-			intp->quartz);
-
 	if (intp == NULL)
 		return STV0900_INVALID_HANDLE;
 
 	if (intp->errs)
 		return STV0900_I2C_ERROR;
 
+	dprintk("%s: Mclk set to %d, Quartz = %d\n", __func__, mclk,
+			intp->quartz);
+
 	clk_sel = ((stv0900_get_bits(intp, F0900_SELX1RATIO) == 1) ? 4 : 6);
 	m_div = ((clk_sel * mclk) / intp->quartz) - 1;
 	stv0900_write_bits(intp, F0900_M_DIV, m_div);
diff --git a/drivers/media/i2c/adv7604.c b/drivers/media/i2c/adv7604.c
index 109bc9b..05f8950 100644
--- a/drivers/media/i2c/adv7604.c
+++ b/drivers/media/i2c/adv7604.c
@@ -53,8 +53,7 @@
 /* ADV7604 system clock frequency */
 #define ADV7604_fsc (28636360)
 
-#define DIGITAL_INPUT ((state->prim_mode == ADV7604_PRIM_MODE_HDMI_COMP) || \
-			(state->prim_mode == ADV7604_PRIM_MODE_HDMI_GR))
+#define DIGITAL_INPUT (state->mode == ADV7604_MODE_HDMI)
 
 /*
  **********************************************************************
@@ -68,7 +67,7 @@
 	struct v4l2_subdev sd;
 	struct media_pad pad;
 	struct v4l2_ctrl_handler hdl;
-	enum adv7604_prim_mode prim_mode;
+	enum adv7604_mode mode;
 	struct v4l2_dv_timings timings;
 	u8 edid[256];
 	unsigned edid_blocks;
@@ -77,6 +76,7 @@
 	struct workqueue_struct *work_queues;
 	struct delayed_work delayed_work_enable_hotplug;
 	bool connector_hdmi;
+	bool restart_stdi_once;
 
 	/* i2c clients */
 	struct i2c_client *i2c_avlink;
@@ -106,7 +106,6 @@
 	V4L2_DV_BT_CEA_720X576P50,
 	V4L2_DV_BT_CEA_1280X720P24,
 	V4L2_DV_BT_CEA_1280X720P25,
-	V4L2_DV_BT_CEA_1280X720P30,
 	V4L2_DV_BT_CEA_1280X720P50,
 	V4L2_DV_BT_CEA_1280X720P60,
 	V4L2_DV_BT_CEA_1920X1080P24,
@@ -115,6 +114,7 @@
 	V4L2_DV_BT_CEA_1920X1080P50,
 	V4L2_DV_BT_CEA_1920X1080P60,
 
+	/* sorted by DMT ID */
 	V4L2_DV_BT_DMT_640X350P85,
 	V4L2_DV_BT_DMT_640X400P85,
 	V4L2_DV_BT_DMT_720X400P85,
@@ -164,6 +164,89 @@
 	{ },
 };
 
+struct adv7604_video_standards {
+	struct v4l2_dv_timings timings;
+	u8 vid_std;
+	u8 v_freq;
+};
+
+/* sorted by number of lines */
+static const struct adv7604_video_standards adv7604_prim_mode_comp[] = {
+	/* { V4L2_DV_BT_CEA_720X480P59_94, 0x0a, 0x00 }, TODO flickering */
+	{ V4L2_DV_BT_CEA_720X576P50, 0x0b, 0x00 },
+	{ V4L2_DV_BT_CEA_1280X720P50, 0x19, 0x01 },
+	{ V4L2_DV_BT_CEA_1280X720P60, 0x19, 0x00 },
+	{ V4L2_DV_BT_CEA_1920X1080P24, 0x1e, 0x04 },
+	{ V4L2_DV_BT_CEA_1920X1080P25, 0x1e, 0x03 },
+	{ V4L2_DV_BT_CEA_1920X1080P30, 0x1e, 0x02 },
+	{ V4L2_DV_BT_CEA_1920X1080P50, 0x1e, 0x01 },
+	{ V4L2_DV_BT_CEA_1920X1080P60, 0x1e, 0x00 },
+	/* TODO add 1920x1080P60_RB (CVT timing) */
+	{ },
+};
+
+/* sorted by number of lines */
+static const struct adv7604_video_standards adv7604_prim_mode_gr[] = {
+	{ V4L2_DV_BT_DMT_640X480P60, 0x08, 0x00 },
+	{ V4L2_DV_BT_DMT_640X480P72, 0x09, 0x00 },
+	{ V4L2_DV_BT_DMT_640X480P75, 0x0a, 0x00 },
+	{ V4L2_DV_BT_DMT_640X480P85, 0x0b, 0x00 },
+	{ V4L2_DV_BT_DMT_800X600P56, 0x00, 0x00 },
+	{ V4L2_DV_BT_DMT_800X600P60, 0x01, 0x00 },
+	{ V4L2_DV_BT_DMT_800X600P72, 0x02, 0x00 },
+	{ V4L2_DV_BT_DMT_800X600P75, 0x03, 0x00 },
+	{ V4L2_DV_BT_DMT_800X600P85, 0x04, 0x00 },
+	{ V4L2_DV_BT_DMT_1024X768P60, 0x0c, 0x00 },
+	{ V4L2_DV_BT_DMT_1024X768P70, 0x0d, 0x00 },
+	{ V4L2_DV_BT_DMT_1024X768P75, 0x0e, 0x00 },
+	{ V4L2_DV_BT_DMT_1024X768P85, 0x0f, 0x00 },
+	{ V4L2_DV_BT_DMT_1280X1024P60, 0x05, 0x00 },
+	{ V4L2_DV_BT_DMT_1280X1024P75, 0x06, 0x00 },
+	{ V4L2_DV_BT_DMT_1360X768P60, 0x12, 0x00 },
+	{ V4L2_DV_BT_DMT_1366X768P60, 0x13, 0x00 },
+	{ V4L2_DV_BT_DMT_1400X1050P60, 0x14, 0x00 },
+	{ V4L2_DV_BT_DMT_1400X1050P75, 0x15, 0x00 },
+	{ V4L2_DV_BT_DMT_1600X1200P60, 0x16, 0x00 }, /* TODO not tested */
+	/* TODO add 1600X1200P60_RB (not a DMT timing) */
+	{ V4L2_DV_BT_DMT_1680X1050P60, 0x18, 0x00 },
+	{ V4L2_DV_BT_DMT_1920X1200P60_RB, 0x19, 0x00 }, /* TODO not tested */
+	{ },
+};
+
+/* sorted by number of lines */
+static const struct adv7604_video_standards adv7604_prim_mode_hdmi_comp[] = {
+	{ V4L2_DV_BT_CEA_720X480P59_94, 0x0a, 0x00 },
+	{ V4L2_DV_BT_CEA_720X576P50, 0x0b, 0x00 },
+	{ V4L2_DV_BT_CEA_1280X720P50, 0x13, 0x01 },
+	{ V4L2_DV_BT_CEA_1280X720P60, 0x13, 0x00 },
+	{ V4L2_DV_BT_CEA_1920X1080P24, 0x1e, 0x04 },
+	{ V4L2_DV_BT_CEA_1920X1080P25, 0x1e, 0x03 },
+	{ V4L2_DV_BT_CEA_1920X1080P30, 0x1e, 0x02 },
+	{ V4L2_DV_BT_CEA_1920X1080P50, 0x1e, 0x01 },
+	{ V4L2_DV_BT_CEA_1920X1080P60, 0x1e, 0x00 },
+	{ },
+};
+
+/* sorted by number of lines */
+static const struct adv7604_video_standards adv7604_prim_mode_hdmi_gr[] = {
+	{ V4L2_DV_BT_DMT_640X480P60, 0x08, 0x00 },
+	{ V4L2_DV_BT_DMT_640X480P72, 0x09, 0x00 },
+	{ V4L2_DV_BT_DMT_640X480P75, 0x0a, 0x00 },
+	{ V4L2_DV_BT_DMT_640X480P85, 0x0b, 0x00 },
+	{ V4L2_DV_BT_DMT_800X600P56, 0x00, 0x00 },
+	{ V4L2_DV_BT_DMT_800X600P60, 0x01, 0x00 },
+	{ V4L2_DV_BT_DMT_800X600P72, 0x02, 0x00 },
+	{ V4L2_DV_BT_DMT_800X600P75, 0x03, 0x00 },
+	{ V4L2_DV_BT_DMT_800X600P85, 0x04, 0x00 },
+	{ V4L2_DV_BT_DMT_1024X768P60, 0x0c, 0x00 },
+	{ V4L2_DV_BT_DMT_1024X768P70, 0x0d, 0x00 },
+	{ V4L2_DV_BT_DMT_1024X768P75, 0x0e, 0x00 },
+	{ V4L2_DV_BT_DMT_1024X768P85, 0x0f, 0x00 },
+	{ V4L2_DV_BT_DMT_1280X1024P60, 0x05, 0x00 },
+	{ V4L2_DV_BT_DMT_1280X1024P75, 0x06, 0x00 },
+	{ },
+};
+
 /* ----------------------------------------------------------------------- */
 
 static inline struct adv7604_state *to_state(struct v4l2_subdev *sd)
@@ -672,64 +755,144 @@
 				((io_read(sd, 0x6f) & 0x10) >> 4));
 }
 
-static void configure_free_run(struct v4l2_subdev *sd, const struct v4l2_bt_timings *timings)
+static int find_and_set_predefined_video_timings(struct v4l2_subdev *sd,
+		u8 prim_mode,
+		const struct adv7604_video_standards *predef_vid_timings,
+		const struct v4l2_dv_timings *timings)
 {
+	struct adv7604_state *state = to_state(sd);
+	int i;
+
+	for (i = 0; predef_vid_timings[i].timings.bt.width; i++) {
+		if (!v4l_match_dv_timings(timings, &predef_vid_timings[i].timings,
+					DIGITAL_INPUT ? 250000 : 1000000))
+			continue;
+		io_write(sd, 0x00, predef_vid_timings[i].vid_std); /* video std */
+		io_write(sd, 0x01, (predef_vid_timings[i].v_freq << 4) +
+				prim_mode); /* v_freq and prim mode */
+		return 0;
+	}
+
+	return -1;
+}
+
+static int configure_predefined_video_timings(struct v4l2_subdev *sd,
+		struct v4l2_dv_timings *timings)
+{
+	struct adv7604_state *state = to_state(sd);
+	int err;
+
+	v4l2_dbg(1, debug, sd, "%s", __func__);
+
+	/* reset to default values */
+	io_write(sd, 0x16, 0x43);
+	io_write(sd, 0x17, 0x5a);
+	/* disable embedded syncs for auto graphics mode */
+	cp_write_and_or(sd, 0x81, 0xef, 0x00);
+	cp_write(sd, 0x8f, 0x00);
+	cp_write(sd, 0x90, 0x00);
+	cp_write(sd, 0xa2, 0x00);
+	cp_write(sd, 0xa3, 0x00);
+	cp_write(sd, 0xa4, 0x00);
+	cp_write(sd, 0xa5, 0x00);
+	cp_write(sd, 0xa6, 0x00);
+	cp_write(sd, 0xa7, 0x00);
+	cp_write(sd, 0xab, 0x00);
+	cp_write(sd, 0xac, 0x00);
+
+	switch (state->mode) {
+	case ADV7604_MODE_COMP:
+	case ADV7604_MODE_GR:
+		err = find_and_set_predefined_video_timings(sd,
+				0x01, adv7604_prim_mode_comp, timings);
+		if (err)
+			err = find_and_set_predefined_video_timings(sd,
+					0x02, adv7604_prim_mode_gr, timings);
+		break;
+	case ADV7604_MODE_HDMI:
+		err = find_and_set_predefined_video_timings(sd,
+				0x05, adv7604_prim_mode_hdmi_comp, timings);
+		if (err)
+			err = find_and_set_predefined_video_timings(sd,
+					0x06, adv7604_prim_mode_hdmi_gr, timings);
+		break;
+	default:
+		v4l2_dbg(2, debug, sd, "%s: Unknown mode %d\n",
+				__func__, state->mode);
+		err = -1;
+		break;
+	}
+
+
+	return err;
+}
+
+static void configure_custom_video_timings(struct v4l2_subdev *sd,
+		const struct v4l2_bt_timings *bt)
+{
+	struct adv7604_state *state = to_state(sd);
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	u32 width = htotal(timings);
-	u32 height = vtotal(timings);
-	u16 ch1_fr_ll = (((u32)timings->pixelclock / 100) > 0) ?
-		((width * (ADV7604_fsc / 100)) / ((u32)timings->pixelclock / 100)) : 0;
+	u32 width = htotal(bt);
+	u32 height = vtotal(bt);
+	u16 cp_start_sav = bt->hsync + bt->hbackporch - 4;
+	u16 cp_start_eav = width - bt->hfrontporch;
+	u16 cp_start_vbi = height - bt->vfrontporch;
+	u16 cp_end_vbi = bt->vsync + bt->vbackporch;
+	u16 ch1_fr_ll = (((u32)bt->pixelclock / 100) > 0) ?
+		((width * (ADV7604_fsc / 100)) / ((u32)bt->pixelclock / 100)) : 0;
+	const u8 pll[2] = {
+		0xc0 | ((width >> 8) & 0x1f),
+		width & 0xff
+	};
 
 	v4l2_dbg(2, debug, sd, "%s\n", __func__);
 
-	cp_write(sd, 0x8f, (ch1_fr_ll >> 8) & 0x7);	/* CH1_FR_LL */
-	cp_write(sd, 0x90, ch1_fr_ll & 0xff);		/* CH1_FR_LL */
-	cp_write(sd, 0xab, (height >> 4) & 0xff); /* CP_LCOUNT_MAX */
-	cp_write(sd, 0xac, (height & 0x0f) << 4); /* CP_LCOUNT_MAX */
-	/* TODO support interlaced */
-	cp_write(sd, 0x91, 0x10);	/* INTERLACED */
+	switch (state->mode) {
+	case ADV7604_MODE_COMP:
+	case ADV7604_MODE_GR:
+		/* auto graphics */
+		io_write(sd, 0x00, 0x07); /* video std */
+		io_write(sd, 0x01, 0x02); /* prim mode */
+		/* enable embedded syncs for auto graphics mode */
+		cp_write_and_or(sd, 0x81, 0xef, 0x10);
 
-	/* Should only be set in auto-graphics mode [REF_02 p. 91-92] */
-	if ((io_read(sd, 0x00) == 0x07) && (io_read(sd, 0x01) == 0x02)) {
-		u16 cp_start_sav, cp_start_eav, cp_start_vbi, cp_end_vbi;
-		const u8 pll[2] = {
-			(0xc0 | ((width >> 8) & 0x1f)),
-			(width & 0xff)
-		};
-
+		/* Should only be set in auto-graphics mode [REF_02, p. 91-92] */
 		/* setup PLL_DIV_MAN_EN and PLL_DIV_RATIO */
 		/* IO-map reg. 0x16 and 0x17 should be written in sequence */
 		if (adv_smbus_write_i2c_block_data(client, 0x16, 2, pll)) {
 			v4l2_err(sd, "writing to reg 0x16 and 0x17 failed\n");
-			return;
+			break;
 		}
 
 		/* active video - horizontal timing */
-		cp_start_sav = timings->hsync + timings->hbackporch - 4;
-		cp_start_eav = width - timings->hfrontporch;
 		cp_write(sd, 0xa2, (cp_start_sav >> 4) & 0xff);
-		cp_write(sd, 0xa3, ((cp_start_sav & 0x0f) << 4) | ((cp_start_eav >> 8) & 0x0f));
+		cp_write(sd, 0xa3, ((cp_start_sav & 0x0f) << 4) |
+					((cp_start_eav >> 8) & 0x0f));
 		cp_write(sd, 0xa4, cp_start_eav & 0xff);
 
 		/* active video - vertical timing */
-		cp_start_vbi = height - timings->vfrontporch;
-		cp_end_vbi = timings->vsync + timings->vbackporch;
 		cp_write(sd, 0xa5, (cp_start_vbi >> 4) & 0xff);
-		cp_write(sd, 0xa6, ((cp_start_vbi & 0xf) << 4) | ((cp_end_vbi >> 8) & 0xf));
+		cp_write(sd, 0xa6, ((cp_start_vbi & 0xf) << 4) |
+					((cp_end_vbi >> 8) & 0xf));
 		cp_write(sd, 0xa7, cp_end_vbi & 0xff);
-	} else {
-		/* reset to default values */
-		io_write(sd, 0x16, 0x43);
-		io_write(sd, 0x17, 0x5a);
-		cp_write(sd, 0xa2, 0x00);
-		cp_write(sd, 0xa3, 0x00);
-		cp_write(sd, 0xa4, 0x00);
-		cp_write(sd, 0xa5, 0x00);
-		cp_write(sd, 0xa6, 0x00);
-		cp_write(sd, 0xa7, 0x00);
+		break;
+	case ADV7604_MODE_HDMI:
+		/* set default prim_mode/vid_std for HDMI
+		   accoring to [REF_03, c. 4.2] */
+		io_write(sd, 0x00, 0x02); /* video std */
+		io_write(sd, 0x01, 0x06); /* prim mode */
+		break;
+	default:
+		v4l2_dbg(2, debug, sd, "%s: Unknown mode %d\n",
+				__func__, state->mode);
+		break;
 	}
-}
 
+	cp_write(sd, 0x8f, (ch1_fr_ll >> 8) & 0x7);
+	cp_write(sd, 0x90, ch1_fr_ll & 0xff);
+	cp_write(sd, 0xab, (height >> 4) & 0xff);
+	cp_write(sd, 0xac, (height & 0x0f) << 4);
+}
 
 static void set_rgb_quantization_range(struct v4l2_subdev *sd)
 {
@@ -738,12 +901,7 @@
 	switch (state->rgb_quantization_range) {
 	case V4L2_DV_RGB_RANGE_AUTO:
 		/* automatic */
-		if ((hdmi_read(sd, 0x05) & 0x80) ||
-				(state->prim_mode == ADV7604_PRIM_MODE_COMP) ||
-				(state->prim_mode == ADV7604_PRIM_MODE_RGB)) {
-			/* receiving HDMI or analog signal */
-			io_write_and_or(sd, 0x02, 0x0f, 0xf0);
-		} else {
+		if (DIGITAL_INPUT && !(hdmi_read(sd, 0x05) & 0x80)) {
 			/* receiving DVI-D signal */
 
 			/* ADV7604 selects RGB limited range regardless of
@@ -756,6 +914,9 @@
 				/* RGB full range (0-255) */
 				io_write_and_or(sd, 0x02, 0x0f, 0x10);
 			}
+		} else {
+			/* receiving HDMI or analog signal, set automode */
+			io_write_and_or(sd, 0x02, 0x0f, 0xf0);
 		}
 		break;
 	case V4L2_DV_RGB_RANGE_LIMITED:
@@ -967,8 +1128,10 @@
 			state->aspect_ratio, timings))
 		return 0;
 
-	v4l2_dbg(2, debug, sd, "%s: No format candidate found for lcf=%d, bl = %d\n",
-			__func__, stdi->lcf, stdi->bl);
+	v4l2_dbg(2, debug, sd,
+		"%s: No format candidate found for lcvs = %d, lcf=%d, bl = %d, %chsync, %cvsync\n",
+		__func__, stdi->lcvs, stdi->lcf, stdi->bl,
+		stdi->hs_pol, stdi->vs_pol);
 	return -1;
 }
 
@@ -1123,7 +1286,7 @@
 		adv7604_fill_optional_dv_timings_fields(sd, timings);
 	} else {
 		/* find format
-		 * Since LCVS values are inaccurate (REF_03, page 275-276),
+		 * Since LCVS values are inaccurate [REF_03, p. 275-276],
 		 * stdi2dv_timings() is called with lcvs +-1 if the first attempt fails.
 		 */
 		if (!stdi2dv_timings(sd, &stdi, timings))
@@ -1135,9 +1298,31 @@
 		stdi.lcvs -= 2;
 		v4l2_dbg(1, debug, sd, "%s: lcvs - 1 = %d\n", __func__, stdi.lcvs);
 		if (stdi2dv_timings(sd, &stdi, timings)) {
+			/*
+			 * The STDI block may measure wrong values, especially
+			 * for lcvs and lcf. If the driver can not find any
+			 * valid timing, the STDI block is restarted to measure
+			 * the video timings again. The function will return an
+			 * error, but the restart of STDI will generate a new
+			 * STDI interrupt and the format detection process will
+			 * restart.
+			 */
+			if (state->restart_stdi_once) {
+				v4l2_dbg(1, debug, sd, "%s: restart STDI\n", __func__);
+				/* TODO restart STDI for Sync Channel 2 */
+				/* enter one-shot mode */
+				cp_write_and_or(sd, 0x86, 0xf9, 0x00);
+				/* trigger STDI restart */
+				cp_write_and_or(sd, 0x86, 0xf9, 0x04);
+				/* reset to continuous mode */
+				cp_write_and_or(sd, 0x86, 0xf9, 0x02);
+				state->restart_stdi_once = false;
+				return -ENOLINK;
+			}
 			v4l2_dbg(1, debug, sd, "%s: format not supported\n", __func__);
 			return -ERANGE;
 		}
+		state->restart_stdi_once = true;
 	}
 found:
 
@@ -1166,6 +1351,7 @@
 {
 	struct adv7604_state *state = to_state(sd);
 	struct v4l2_bt_timings *bt;
+	int err;
 
 	if (!timings)
 		return -EINVAL;
@@ -1178,12 +1364,20 @@
 				__func__, (u32)bt->pixelclock);
 		return -ERANGE;
 	}
+
 	adv7604_fill_optional_dv_timings_fields(sd, timings);
 
 	state->timings = *timings;
 
-	/* freerun */
-	configure_free_run(sd, bt);
+	cp_write(sd, 0x91, bt->interlaced ? 0x50 : 0x10);
+
+	/* Use prim_mode and vid_std when available */
+	err = configure_predefined_video_timings(sd, timings);
+	if (err) {
+		/* custom settings when the video format
+		 does not have prim_mode/vid_std */
+		configure_custom_video_timings(sd, bt);
+	}
 
 	set_rgb_quantization_range(sd);
 
@@ -1203,24 +1397,25 @@
 	return 0;
 }
 
-static void enable_input(struct v4l2_subdev *sd, enum adv7604_prim_mode prim_mode)
+static void enable_input(struct v4l2_subdev *sd)
 {
-	switch (prim_mode) {
-	case ADV7604_PRIM_MODE_COMP:
-	case ADV7604_PRIM_MODE_RGB:
+	struct adv7604_state *state = to_state(sd);
+
+	switch (state->mode) {
+	case ADV7604_MODE_COMP:
+	case ADV7604_MODE_GR:
 		/* enable */
 		io_write(sd, 0x15, 0xb0);   /* Disable Tristate of Pins (no audio) */
 		break;
-	case ADV7604_PRIM_MODE_HDMI_COMP:
-	case ADV7604_PRIM_MODE_HDMI_GR:
+	case ADV7604_MODE_HDMI:
 		/* enable */
 		hdmi_write(sd, 0x1a, 0x0a); /* Unmute audio */
 		hdmi_write(sd, 0x01, 0x00); /* Enable HDMI clock terminators */
 		io_write(sd, 0x15, 0xa0);   /* Disable Tristate of Pins */
 		break;
 	default:
-		v4l2_err(sd, "%s: reserved primary mode 0x%0x\n",
-				__func__, prim_mode);
+		v4l2_dbg(2, debug, sd, "%s: Unknown mode %d\n",
+				__func__, state->mode);
 		break;
 	}
 }
@@ -1233,17 +1428,13 @@
 	hdmi_write(sd, 0x01, 0x78); /* Disable HDMI clock terminators */
 }
 
-static void select_input(struct v4l2_subdev *sd, enum adv7604_prim_mode prim_mode)
+static void select_input(struct v4l2_subdev *sd)
 {
-	switch (prim_mode) {
-	case ADV7604_PRIM_MODE_COMP:
-	case ADV7604_PRIM_MODE_RGB:
-		/* set mode and select free run resolution */
-		io_write(sd, 0x00, 0x07); /* video std */
-		io_write(sd, 0x01, 0x02); /* prim mode */
-		/* enable embedded syncs for auto graphics mode */
-		cp_write_and_or(sd, 0x81, 0xef, 0x10);
+	struct adv7604_state *state = to_state(sd);
 
+	switch (state->mode) {
+	case ADV7604_MODE_COMP:
+	case ADV7604_MODE_GR:
 		/* reset ADI recommended settings for HDMI: */
 		/* "ADV7604 Register Settings Recommendations (rev. 2.5, June 2010)" p. 4. */
 		hdmi_write(sd, 0x0d, 0x04); /* HDMI filter optimization */
@@ -1271,16 +1462,7 @@
 		cp_write(sd, 0x40, 0x5c); /* CP core pre-gain control. Graphics mode */
 		break;
 
-	case ADV7604_PRIM_MODE_HDMI_COMP:
-	case ADV7604_PRIM_MODE_HDMI_GR:
-		/* set mode and select free run resolution */
-		/* video std */
-		io_write(sd, 0x00,
-			(prim_mode == ADV7604_PRIM_MODE_HDMI_GR) ? 0x02 : 0x1e);
-		io_write(sd, 0x01, prim_mode); /* prim mode */
-		/* disable embedded syncs for auto graphics mode */
-		cp_write_and_or(sd, 0x81, 0xef, 0x00);
-
+	case ADV7604_MODE_HDMI:
 		/* set ADI recommended settings for HDMI: */
 		/* "ADV7604 Register Settings Recommendations (rev. 2.5, June 2010)" p. 4. */
 		hdmi_write(sd, 0x0d, 0x84); /* HDMI filter optimization */
@@ -1309,7 +1491,8 @@
 
 		break;
 	default:
-		v4l2_err(sd, "%s: reserved primary mode 0x%0x\n", __func__, prim_mode);
+		v4l2_dbg(2, debug, sd, "%s: Unknown mode %d\n",
+				__func__, state->mode);
 		break;
 	}
 }
@@ -1321,26 +1504,13 @@
 
 	v4l2_dbg(2, debug, sd, "%s: input %d", __func__, input);
 
-	switch (input) {
-	case 0:
-		/* TODO select HDMI_COMP or HDMI_GR */
-		state->prim_mode = ADV7604_PRIM_MODE_HDMI_COMP;
-		break;
-	case 1:
-		state->prim_mode = ADV7604_PRIM_MODE_RGB;
-		break;
-	case 2:
-		state->prim_mode = ADV7604_PRIM_MODE_COMP;
-		break;
-	default:
-		return -EINVAL;
-	}
+	state->mode = input;
 
 	disable_input(sd);
 
-	select_input(sd, state->prim_mode);
+	select_input(sd);
 
-	enable_input(sd, state->prim_mode);
+	enable_input(sd);
 
 	return 0;
 }
@@ -1549,8 +1719,9 @@
 	v4l2_info(sd, "CP locked: %s\n", no_lock_cp(sd) ? "false" : "true");
 	v4l2_info(sd, "CP free run: %s\n",
 			(!!(cp_read(sd, 0xff) & 0x10) ? "on" : "off"));
-	v4l2_info(sd, "Prim-mode = 0x%x, video std = 0x%x\n",
-			io_read(sd, 0x01) & 0x0f, io_read(sd, 0x00) & 0x3f);
+	v4l2_info(sd, "Prim-mode = 0x%x, video std = 0x%x, v_freq = 0x%x\n",
+			io_read(sd, 0x01) & 0x0f, io_read(sd, 0x00) & 0x3f,
+			(io_read(sd, 0x01) & 0x70) >> 4);
 
 	v4l2_info(sd, "-----Video Timings-----\n");
 	if (read_stdi(sd, &stdi))
@@ -1712,9 +1883,9 @@
 	cp_write(sd, 0xba, (pdata->hdmi_free_run_mode << 1) | 0x01); /* HDMI free run */
 	cp_write(sd, 0xf3, 0xdc); /* Low threshold to enter/exit free run mode */
 	cp_write(sd, 0xf9, 0x23); /*  STDI ch. 1 - LCVS change threshold -
-				      ADI recommended setting [REF_01 c. 2.3.3] */
+				      ADI recommended setting [REF_01, c. 2.3.3] */
 	cp_write(sd, 0x45, 0x23); /*  STDI ch. 2 - LCVS change threshold -
-				      ADI recommended setting [REF_01 c. 2.3.3] */
+				      ADI recommended setting [REF_01, c. 2.3.3] */
 	cp_write(sd, 0xc9, 0x2d); /* use prim_mode and vid_std as free run resolution
 				     for digital formats */
 
@@ -1724,11 +1895,6 @@
 	afe_write(sd, 0x02, pdata->ain_sel); /* Select analog input muxing mode */
 	io_write_and_or(sd, 0x30, ~(1 << 4), pdata->output_bus_lsb_to_msb << 4);
 
-	state->prim_mode = pdata->prim_mode;
-	select_input(sd, pdata->prim_mode);
-
-	enable_input(sd, pdata->prim_mode);
-
 	/* interrupts */
 	io_write(sd, 0x40, 0xc2); /* Configure INT1 */
 	io_write(sd, 0x41, 0xd7); /* STDI irq for any change, disable INT2 */
@@ -1883,6 +2049,7 @@
 		v4l2_err(sd, "failed to create all i2c clients\n");
 		goto err_i2c;
 	}
+	state->restart_stdi_once = true;
 
 	/* work queues */
 	state->work_queues = create_singlethread_workqueue(client->name);
diff --git a/drivers/media/i2c/soc_camera/mt9v022.c b/drivers/media/i2c/soc_camera/mt9v022.c
index 13057b9..333ef17 100644
--- a/drivers/media/i2c/soc_camera/mt9v022.c
+++ b/drivers/media/i2c/soc_camera/mt9v022.c
@@ -263,9 +263,14 @@
 		if (ret & 1) /* Autoexposure */
 			ret = reg_write(client, mt9v022->reg->max_total_shutter_width,
 					rect.height + mt9v022->y_skip_top + 43);
-		else
-			ret = reg_write(client, MT9V022_TOTAL_SHUTTER_WIDTH,
-					rect.height + mt9v022->y_skip_top + 43);
+		/*
+		 * If autoexposure is off, there is no need to set
+		 * MT9V022_TOTAL_SHUTTER_WIDTH here. Autoexposure can be off
+		 * only if the user has set exposure manually, using the
+		 * V4L2_CID_EXPOSURE_AUTO with the value V4L2_EXPOSURE_MANUAL.
+		 * In this case the register MT9V022_TOTAL_SHUTTER_WIDTH
+		 * already contains the correct value.
+		 */
 	}
 	/* Setup frame format: defaults apart from width and height */
 	if (!ret)
diff --git a/drivers/media/platform/exynos-gsc/gsc-core.c b/drivers/media/platform/exynos-gsc/gsc-core.c
index bfec9e6..19cbb12 100644
--- a/drivers/media/platform/exynos-gsc/gsc-core.c
+++ b/drivers/media/platform/exynos-gsc/gsc-core.c
@@ -965,8 +965,10 @@
 MODULE_DEVICE_TABLE(platform, gsc_driver_ids);
 
 static const struct of_device_id exynos_gsc_match[] = {
-	{ .compatible = "samsung,exynos5250-gsc",
-	.data = &gsc_v_100_drvdata, },
+	{
+		.compatible = "samsung,exynos5-gsc",
+		.data = &gsc_v_100_drvdata,
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, exynos_gsc_match);
diff --git a/drivers/media/platform/exynos-gsc/gsc-m2m.c b/drivers/media/platform/exynos-gsc/gsc-m2m.c
index 3c7f005..c065d04 100644
--- a/drivers/media/platform/exynos-gsc/gsc-m2m.c
+++ b/drivers/media/platform/exynos-gsc/gsc-m2m.c
@@ -657,8 +657,7 @@
 	pr_debug("pid: %d, state: 0x%lx, refcnt= %d",
 		task_pid_nr(current), gsc->state, gsc->m2m.refcnt);
 
-	if (mutex_lock_interruptible(&gsc->lock))
-		return -ERESTARTSYS;
+	mutex_lock(&gsc->lock);
 
 	v4l2_m2m_ctx_release(ctx->m2m_ctx);
 	gsc_ctrls_delete(ctx);
@@ -732,6 +731,7 @@
 	gsc->vdev.ioctl_ops	= &gsc_m2m_ioctl_ops;
 	gsc->vdev.release	= video_device_release_empty;
 	gsc->vdev.lock		= &gsc->lock;
+	gsc->vdev.vfl_dir	= VFL_DIR_M2M;
 	snprintf(gsc->vdev.name, sizeof(gsc->vdev.name), "%s.%d:m2m",
 					GSC_MODULE_NAME, gsc->id);
 
diff --git a/drivers/media/platform/exynos-gsc/gsc-regs.h b/drivers/media/platform/exynos-gsc/gsc-regs.h
index 533e994..4678f9a 100644
--- a/drivers/media/platform/exynos-gsc/gsc-regs.h
+++ b/drivers/media/platform/exynos-gsc/gsc-regs.h
@@ -40,10 +40,10 @@
 #define GSC_IN_ROT_YFLIP		(2 << 16)
 #define GSC_IN_ROT_XFLIP		(1 << 16)
 #define GSC_IN_RGB_TYPE_MASK		(3 << 14)
-#define GSC_IN_RGB_HD_WIDE		(3 << 14)
-#define GSC_IN_RGB_HD_NARROW		(2 << 14)
-#define GSC_IN_RGB_SD_WIDE		(1 << 14)
-#define GSC_IN_RGB_SD_NARROW		(0 << 14)
+#define GSC_IN_RGB_HD_NARROW		(3 << 14)
+#define GSC_IN_RGB_HD_WIDE		(2 << 14)
+#define GSC_IN_RGB_SD_NARROW		(1 << 14)
+#define GSC_IN_RGB_SD_WIDE		(0 << 14)
 #define GSC_IN_YUV422_1P_ORDER_MASK	(1 << 13)
 #define GSC_IN_YUV422_1P_ORDER_LSB_Y	(0 << 13)
 #define GSC_IN_YUV422_1P_OEDER_LSB_C	(1 << 13)
@@ -85,10 +85,10 @@
 #define GSC_OUT_GLOBAL_ALPHA_MASK	(0xff << 24)
 #define GSC_OUT_GLOBAL_ALPHA(x)		((x) << 24)
 #define GSC_OUT_RGB_TYPE_MASK		(3 << 10)
-#define GSC_OUT_RGB_HD_NARROW		(3 << 10)
-#define GSC_OUT_RGB_HD_WIDE		(2 << 10)
-#define GSC_OUT_RGB_SD_NARROW		(1 << 10)
-#define GSC_OUT_RGB_SD_WIDE		(0 << 10)
+#define GSC_OUT_RGB_HD_WIDE		(3 << 10)
+#define GSC_OUT_RGB_HD_NARROW		(2 << 10)
+#define GSC_OUT_RGB_SD_WIDE		(1 << 10)
+#define GSC_OUT_RGB_SD_NARROW		(0 << 10)
 #define GSC_OUT_YUV422_1P_ORDER_MASK	(1 << 9)
 #define GSC_OUT_YUV422_1P_ORDER_LSB_Y	(0 << 9)
 #define GSC_OUT_YUV422_1P_OEDER_LSB_C	(1 << 9)
diff --git a/drivers/media/platform/omap3isp/ispccdc.c b/drivers/media/platform/omap3isp/ispccdc.c
index 60181ab..aa9df9d 100644
--- a/drivers/media/platform/omap3isp/ispccdc.c
+++ b/drivers/media/platform/omap3isp/ispccdc.c
@@ -1706,7 +1706,7 @@
 }
 
 static int ccdc_subscribe_event(struct v4l2_subdev *sd, struct v4l2_fh *fh,
-				const struct v4l2_event_subscription *sub)
+				struct v4l2_event_subscription *sub)
 {
 	if (sub->type != V4L2_EVENT_FRAME_SYNC)
 		return -EINVAL;
@@ -1719,7 +1719,7 @@
 }
 
 static int ccdc_unsubscribe_event(struct v4l2_subdev *sd, struct v4l2_fh *fh,
-				  const struct v4l2_event_subscription *sub)
+				  struct v4l2_event_subscription *sub)
 {
 	return v4l2_event_unsubscribe(fh, sub);
 }
diff --git a/drivers/media/platform/omap3isp/ispstat.c b/drivers/media/platform/omap3isp/ispstat.c
index d7ac76b..b8640be 100644
--- a/drivers/media/platform/omap3isp/ispstat.c
+++ b/drivers/media/platform/omap3isp/ispstat.c
@@ -1025,7 +1025,7 @@
 
 int omap3isp_stat_subscribe_event(struct v4l2_subdev *subdev,
 				  struct v4l2_fh *fh,
-				  const struct v4l2_event_subscription *sub)
+				  struct v4l2_event_subscription *sub)
 {
 	struct ispstat *stat = v4l2_get_subdevdata(subdev);
 
@@ -1037,7 +1037,7 @@
 
 int omap3isp_stat_unsubscribe_event(struct v4l2_subdev *subdev,
 				    struct v4l2_fh *fh,
-				    const struct v4l2_event_subscription *sub)
+				    struct v4l2_event_subscription *sub)
 {
 	return v4l2_event_unsubscribe(fh, sub);
 }
diff --git a/drivers/media/platform/omap3isp/ispstat.h b/drivers/media/platform/omap3isp/ispstat.h
index a6fe653..9b7c865 100644
--- a/drivers/media/platform/omap3isp/ispstat.h
+++ b/drivers/media/platform/omap3isp/ispstat.h
@@ -147,10 +147,10 @@
 void omap3isp_stat_cleanup(struct ispstat *stat);
 int omap3isp_stat_subscribe_event(struct v4l2_subdev *subdev,
 				  struct v4l2_fh *fh,
-				  const struct v4l2_event_subscription *sub);
+				  struct v4l2_event_subscription *sub);
 int omap3isp_stat_unsubscribe_event(struct v4l2_subdev *subdev,
 				    struct v4l2_fh *fh,
-				    const struct v4l2_event_subscription *sub);
+				    struct v4l2_event_subscription *sub);
 int omap3isp_stat_s_stream(struct v4l2_subdev *subdev, int enable);
 
 int omap3isp_stat_busy(struct ispstat *stat);
diff --git a/drivers/media/platform/omap3isp/ispvideo.c b/drivers/media/platform/omap3isp/ispvideo.c
index a0b737fe..75cd309 100644
--- a/drivers/media/platform/omap3isp/ispvideo.c
+++ b/drivers/media/platform/omap3isp/ispvideo.c
@@ -792,7 +792,7 @@
 }
 
 static int
-isp_video_set_crop(struct file *file, void *fh, struct v4l2_crop *crop)
+isp_video_set_crop(struct file *file, void *fh, const struct v4l2_crop *crop)
 {
 	struct isp_video *video = video_drvdata(file);
 	struct v4l2_subdev *subdev;
diff --git a/drivers/media/platform/s5p-fimc/Kconfig b/drivers/media/platform/s5p-fimc/Kconfig
index 8f090a8..c16b20d8 100644
--- a/drivers/media/platform/s5p-fimc/Kconfig
+++ b/drivers/media/platform/s5p-fimc/Kconfig
@@ -24,6 +24,7 @@
 config VIDEO_S5P_MIPI_CSIS
 	tristate "S5P/EXYNOS MIPI-CSI2 receiver (MIPI-CSIS) driver"
 	depends on REGULATOR
+	select S5P_SETUP_MIPIPHY
 	help
 	  This is a V4L2 driver for Samsung S5P and EXYNOS4 SoC MIPI-CSI2
 	  receiver (MIPI-CSIS) devices.
diff --git a/drivers/media/platform/s5p-fimc/fimc-capture.c b/drivers/media/platform/s5p-fimc/fimc-capture.c
index 367efd1..891ee87 100644
--- a/drivers/media/platform/s5p-fimc/fimc-capture.c
+++ b/drivers/media/platform/s5p-fimc/fimc-capture.c
@@ -556,8 +556,7 @@
 
 	dbg("pid: %d, state: 0x%lx", task_pid_nr(current), fimc->state);
 
-	if (mutex_lock_interruptible(&fimc->lock))
-		return -ERESTARTSYS;
+	mutex_lock(&fimc->lock);
 
 	if (--fimc->vid_cap.refcnt == 0) {
 		clear_bit(ST_CAPT_BUSY, &fimc->state);
@@ -1736,7 +1735,9 @@
 	q->mem_ops = &vb2_dma_contig_memops;
 	q->buf_struct_size = sizeof(struct fimc_vid_buffer);
 
-	vb2_queue_init(q);
+	ret = vb2_queue_init(q);
+	if (ret)
+		goto err_ent;
 
 	vid_cap->vd_pad.flags = MEDIA_PAD_FL_SINK;
 	ret = media_entity_init(&vfd->entity, 1, &vid_cap->vd_pad, 0);
@@ -1772,9 +1773,13 @@
 	if (ret)
 		return ret;
 
+	fimc->pipeline_ops = v4l2_get_subdev_hostdata(sd);
+
 	ret = fimc_register_capture_device(fimc, sd->v4l2_dev);
-	if (ret)
+	if (ret) {
 		fimc_unregister_m2m_device(fimc);
+		fimc->pipeline_ops = NULL;
+	}
 
 	return ret;
 }
@@ -1791,6 +1796,7 @@
 	if (video_is_registered(&fimc->vid_cap.vfd)) {
 		video_unregister_device(&fimc->vid_cap.vfd);
 		media_entity_cleanup(&fimc->vid_cap.vfd.entity);
+		fimc->pipeline_ops = NULL;
 	}
 	kfree(fimc->vid_cap.ctx);
 	fimc->vid_cap.ctx = NULL;
diff --git a/drivers/media/platform/s5p-fimc/fimc-lite.c b/drivers/media/platform/s5p-fimc/fimc-lite.c
index 70bcf39..1b309a7 100644
--- a/drivers/media/platform/s5p-fimc/fimc-lite.c
+++ b/drivers/media/platform/s5p-fimc/fimc-lite.c
@@ -491,8 +491,7 @@
 	struct fimc_lite *fimc = video_drvdata(file);
 	int ret;
 
-	if (mutex_lock_interruptible(&fimc->lock))
-		return -ERESTARTSYS;
+	mutex_lock(&fimc->lock);
 
 	if (--fimc->ref_count == 0 && fimc->out_path == FIMC_IO_DMA) {
 		clear_bit(ST_FLITE_IN_USE, &fimc->state);
@@ -1253,7 +1252,9 @@
 	q->buf_struct_size = sizeof(struct flite_buffer);
 	q->drv_priv = fimc;
 
-	vb2_queue_init(q);
+	ret = vb2_queue_init(q);
+	if (ret < 0)
+		return ret;
 
 	fimc->vd_pad.flags = MEDIA_PAD_FL_SINK;
 	ret = media_entity_init(&vfd->entity, 1, &fimc->vd_pad, 0);
@@ -1261,10 +1262,12 @@
 		return ret;
 
 	video_set_drvdata(vfd, fimc);
+	fimc->pipeline_ops = v4l2_get_subdev_hostdata(sd);
 
 	ret = video_register_device(vfd, VFL_TYPE_GRABBER, -1);
 	if (ret < 0) {
 		media_entity_cleanup(&vfd->entity);
+		fimc->pipeline_ops = NULL;
 		return ret;
 	}
 
@@ -1283,6 +1286,7 @@
 	if (video_is_registered(&fimc->vfd)) {
 		video_unregister_device(&fimc->vfd);
 		media_entity_cleanup(&fimc->vfd.entity);
+		fimc->pipeline_ops = NULL;
 	}
 }
 
diff --git a/drivers/media/platform/s5p-fimc/fimc-m2m.c b/drivers/media/platform/s5p-fimc/fimc-m2m.c
index 4500e44..62afed3 100644
--- a/drivers/media/platform/s5p-fimc/fimc-m2m.c
+++ b/drivers/media/platform/s5p-fimc/fimc-m2m.c
@@ -718,8 +718,7 @@
 	dbg("pid: %d, state: 0x%lx, refcnt= %d",
 		task_pid_nr(current), fimc->state, fimc->m2m.refcnt);
 
-	if (mutex_lock_interruptible(&fimc->lock))
-		return -ERESTARTSYS;
+	mutex_lock(&fimc->lock);
 
 	v4l2_m2m_ctx_release(ctx->m2m_ctx);
 	fimc_ctrls_delete(ctx);
diff --git a/drivers/media/platform/s5p-fimc/fimc-mdevice.c b/drivers/media/platform/s5p-fimc/fimc-mdevice.c
index 80ada58..0531ab7 100644
--- a/drivers/media/platform/s5p-fimc/fimc-mdevice.c
+++ b/drivers/media/platform/s5p-fimc/fimc-mdevice.c
@@ -343,53 +343,50 @@
 static int fimc_register_callback(struct device *dev, void *p)
 {
 	struct fimc_dev *fimc = dev_get_drvdata(dev);
-	struct v4l2_subdev *sd = &fimc->vid_cap.subdev;
+	struct v4l2_subdev *sd;
 	struct fimc_md *fmd = p;
-	int ret = 0;
+	int ret;
 
-	if (!fimc || !fimc->pdev)
+	if (fimc == NULL || fimc->id >= FIMC_MAX_DEVS)
 		return 0;
 
-	if (fimc->pdev->id < 0 || fimc->pdev->id >= FIMC_MAX_DEVS)
-		return 0;
-
-	fimc->pipeline_ops = &fimc_pipeline_ops;
-	fmd->fimc[fimc->pdev->id] = fimc;
+	sd = &fimc->vid_cap.subdev;
 	sd->grp_id = FIMC_GROUP_ID;
+	v4l2_set_subdev_hostdata(sd, (void *)&fimc_pipeline_ops);
 
 	ret = v4l2_device_register_subdev(&fmd->v4l2_dev, sd);
 	if (ret) {
 		v4l2_err(&fmd->v4l2_dev, "Failed to register FIMC.%d (%d)\n",
 			 fimc->id, ret);
+		return ret;
 	}
 
-	return ret;
+	fmd->fimc[fimc->id] = fimc;
+	return 0;
 }
 
 static int fimc_lite_register_callback(struct device *dev, void *p)
 {
 	struct fimc_lite *fimc = dev_get_drvdata(dev);
-	struct v4l2_subdev *sd = &fimc->subdev;
 	struct fimc_md *fmd = p;
 	int ret;
 
-	if (fimc == NULL)
+	if (fimc == NULL || fimc->index >= FIMC_LITE_MAX_DEVS)
 		return 0;
 
-	if (fimc->index >= FIMC_LITE_MAX_DEVS)
-		return 0;
+	fimc->subdev.grp_id = FLITE_GROUP_ID;
+	v4l2_set_subdev_hostdata(&fimc->subdev, (void *)&fimc_pipeline_ops);
 
-	fimc->pipeline_ops = &fimc_pipeline_ops;
-	fmd->fimc_lite[fimc->index] = fimc;
-	sd->grp_id = FLITE_GROUP_ID;
-
-	ret = v4l2_device_register_subdev(&fmd->v4l2_dev, sd);
+	ret = v4l2_device_register_subdev(&fmd->v4l2_dev, &fimc->subdev);
 	if (ret) {
 		v4l2_err(&fmd->v4l2_dev,
 			 "Failed to register FIMC-LITE.%d (%d)\n",
 			 fimc->index, ret);
+		return ret;
 	}
-	return ret;
+
+	fmd->fimc_lite[fimc->index] = fimc;
+	return 0;
 }
 
 static int csis_register_callback(struct device *dev, void *p)
@@ -407,10 +404,12 @@
 	v4l2_info(sd, "csis%d sd: %s\n", pdev->id, sd->name);
 
 	id = pdev->id < 0 ? 0 : pdev->id;
-	fmd->csis[id].sd = sd;
 	sd->grp_id = CSIS_GROUP_ID;
+
 	ret = v4l2_device_register_subdev(&fmd->v4l2_dev, sd);
-	if (ret)
+	if (!ret)
+		fmd->csis[id].sd = sd;
+	else
 		v4l2_err(&fmd->v4l2_dev,
 			 "Failed to register CSIS subdevice: %d\n", ret);
 	return ret;
diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc.c b/drivers/media/platform/s5p-mfc/s5p_mfc.c
index 130f4ac..3afe879 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc.c
@@ -381,11 +381,8 @@
 		ctx->consumed_stream += s5p_mfc_hw_call(dev->mfc_ops,
 						get_consumed_stream, dev);
 		if (ctx->codec_mode != S5P_MFC_CODEC_H264_DEC &&
-			s5p_mfc_hw_call(dev->mfc_ops,
-				get_dec_frame_type, dev) ==
-					S5P_FIMV_DECODE_FRAME_P_FRAME
-					&& ctx->consumed_stream + STUFF_BYTE <
-					src_buf->b->v4l2_planes[0].bytesused) {
+			ctx->consumed_stream + STUFF_BYTE <
+			src_buf->b->v4l2_planes[0].bytesused) {
 			/* Run MFC again on the same buffer */
 			mfc_debug(2, "Running again the same buffer\n");
 			ctx->after_packed_pb = 1;
diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c
index 50b5bee..3a8cfd9f 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c
@@ -1762,7 +1762,7 @@
 
 int s5p_mfc_get_dec_y_adr_v6(struct s5p_mfc_dev *dev)
 {
-	return mfc_read(dev, S5P_FIMV_D_DISPLAY_LUMA_ADDR_V6);
+	return mfc_read(dev, S5P_FIMV_D_DECODED_LUMA_ADDR_V6);
 }
 
 int s5p_mfc_get_dspl_status_v6(struct s5p_mfc_dev *dev)
diff --git a/drivers/media/platform/sh_vou.c b/drivers/media/platform/sh_vou.c
index 85fd312..a1c87f0 100644
--- a/drivers/media/platform/sh_vou.c
+++ b/drivers/media/platform/sh_vou.c
@@ -935,9 +935,10 @@
 /* Assume a dull encoder, do all the work ourselves. */
 static int sh_vou_s_crop(struct file *file, void *fh, const struct v4l2_crop *a)
 {
+	struct v4l2_crop a_writable = *a;
 	struct video_device *vdev = video_devdata(file);
 	struct sh_vou_device *vou_dev = video_get_drvdata(vdev);
-	struct v4l2_rect *rect = &a->c;
+	struct v4l2_rect *rect = &a_writable.c;
 	struct v4l2_crop sd_crop = {.type = V4L2_BUF_TYPE_VIDEO_OUTPUT};
 	struct v4l2_pix_format *pix = &vou_dev->pix;
 	struct sh_vou_geometry geo;
diff --git a/drivers/media/platform/soc_camera/mx1_camera.c b/drivers/media/platform/soc_camera/mx1_camera.c
index bbe7099..032b8c9 100644
--- a/drivers/media/platform/soc_camera/mx1_camera.c
+++ b/drivers/media/platform/soc_camera/mx1_camera.c
@@ -470,14 +470,6 @@
 	pcdev->icd = NULL;
 }
 
-static int mx1_camera_set_crop(struct soc_camera_device *icd,
-			       struct v4l2_crop *a)
-{
-	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
-
-	return v4l2_subdev_call(sd, video, s_crop, a);
-}
-
 static int mx1_camera_set_bus_param(struct soc_camera_device *icd)
 {
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
@@ -689,7 +681,6 @@
 	.add		= mx1_camera_add_device,
 	.remove		= mx1_camera_remove_device,
 	.set_bus_param	= mx1_camera_set_bus_param,
-	.set_crop	= mx1_camera_set_crop,
 	.set_fmt	= mx1_camera_set_fmt,
 	.try_fmt	= mx1_camera_try_fmt,
 	.init_videobuf	= mx1_camera_init_videobuf,
diff --git a/drivers/media/platform/soc_camera/mx2_camera.c b/drivers/media/platform/soc_camera/mx2_camera.c
index 9fd9d1c..9a55f4c 100644
--- a/drivers/media/platform/soc_camera/mx2_camera.c
+++ b/drivers/media/platform/soc_camera/mx2_camera.c
@@ -864,8 +864,10 @@
 
 		bytesperline = soc_mbus_bytes_per_line(icd->user_width,
 				icd->current_fmt->host_fmt);
-		if (bytesperline < 0)
+		if (bytesperline < 0) {
+			spin_unlock_irqrestore(&pcdev->lock, flags);
 			return bytesperline;
+		}
 
 		/*
 		 * I didn't manage to properly enable/disable the prp
@@ -878,8 +880,10 @@
 		pcdev->discard_buffer = dma_alloc_coherent(ici->v4l2_dev.dev,
 				pcdev->discard_size, &pcdev->discard_buffer_dma,
 				GFP_KERNEL);
-		if (!pcdev->discard_buffer)
+		if (!pcdev->discard_buffer) {
+			spin_unlock_irqrestore(&pcdev->lock, flags);
 			return -ENOMEM;
+		}
 
 		pcdev->buf_discard[0].discard = true;
 		list_add_tail(&pcdev->buf_discard[0].queue,
@@ -1099,9 +1103,10 @@
 }
 
 static int mx2_camera_set_crop(struct soc_camera_device *icd,
-				struct v4l2_crop *a)
+				const struct v4l2_crop *a)
 {
-	struct v4l2_rect *rect = &a->c;
+	struct v4l2_crop a_writable = *a;
+	struct v4l2_rect *rect = &a_writable.c;
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 	struct v4l2_mbus_framefmt mf;
 	int ret;
diff --git a/drivers/media/platform/soc_camera/mx3_camera.c b/drivers/media/platform/soc_camera/mx3_camera.c
index 3557ac9..261f6e9 100644
--- a/drivers/media/platform/soc_camera/mx3_camera.c
+++ b/drivers/media/platform/soc_camera/mx3_camera.c
@@ -799,9 +799,10 @@
  * default g_crop and cropcap from soc_camera.c
  */
 static int mx3_camera_set_crop(struct soc_camera_device *icd,
-			       struct v4l2_crop *a)
+			       const struct v4l2_crop *a)
 {
-	struct v4l2_rect *rect = &a->c;
+	struct v4l2_crop a_writable = *a;
+	struct v4l2_rect *rect = &a_writable.c;
 	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct mx3_camera_dev *mx3_cam = ici->priv;
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
diff --git a/drivers/media/platform/soc_camera/omap1_camera.c b/drivers/media/platform/soc_camera/omap1_camera.c
index fa08c76..13636a5 100644
--- a/drivers/media/platform/soc_camera/omap1_camera.c
+++ b/drivers/media/platform/soc_camera/omap1_camera.c
@@ -1215,9 +1215,9 @@
 }
 
 static int omap1_cam_set_crop(struct soc_camera_device *icd,
-			       struct v4l2_crop *crop)
+			       const struct v4l2_crop *crop)
 {
-	struct v4l2_rect *rect = &crop->c;
+	const struct v4l2_rect *rect = &crop->c;
 	const struct soc_camera_format_xlate *xlate = icd->current_fmt;
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 	struct device *dev = icd->parent;
diff --git a/drivers/media/platform/soc_camera/pxa_camera.c b/drivers/media/platform/soc_camera/pxa_camera.c
index 1e3776d..3434ffe 100644
--- a/drivers/media/platform/soc_camera/pxa_camera.c
+++ b/drivers/media/platform/soc_camera/pxa_camera.c
@@ -1337,9 +1337,9 @@
 }
 
 static int pxa_camera_set_crop(struct soc_camera_device *icd,
-			       struct v4l2_crop *a)
+			       const struct v4l2_crop *a)
 {
-	struct v4l2_rect *rect = &a->c;
+	const struct v4l2_rect *rect = &a->c;
 	struct device *dev = icd->parent;
 	struct soc_camera_host *ici = to_soc_camera_host(dev);
 	struct pxa_camera_dev *pcdev = ici->priv;
diff --git a/drivers/media/platform/soc_camera/sh_mobile_ceu_camera.c b/drivers/media/platform/soc_camera/sh_mobile_ceu_camera.c
index 0a24253..2d8861c 100644
--- a/drivers/media/platform/soc_camera/sh_mobile_ceu_camera.c
+++ b/drivers/media/platform/soc_camera/sh_mobile_ceu_camera.c
@@ -1182,13 +1182,13 @@
 }
 
 /* Check if any dimension of r1 is smaller than respective one of r2 */
-static bool is_smaller(struct v4l2_rect *r1, struct v4l2_rect *r2)
+static bool is_smaller(const struct v4l2_rect *r1, const struct v4l2_rect *r2)
 {
 	return r1->width < r2->width || r1->height < r2->height;
 }
 
 /* Check if r1 fails to cover r2 */
-static bool is_inside(struct v4l2_rect *r1, struct v4l2_rect *r2)
+static bool is_inside(const struct v4l2_rect *r1, const struct v4l2_rect *r2)
 {
 	return r1->left > r2->left || r1->top > r2->top ||
 		r1->left + r1->width < r2->left + r2->width ||
@@ -1263,7 +1263,7 @@
  * 3. if (2) failed, try to request the maximum image
  */
 static int client_s_crop(struct soc_camera_device *icd, struct v4l2_crop *crop,
-			 const struct v4l2_crop *cam_crop)
+			 struct v4l2_crop *cam_crop)
 {
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 	struct v4l2_rect *rect = &crop->c, *cam_rect = &cam_crop->c;
@@ -1519,7 +1519,8 @@
 static int sh_mobile_ceu_set_crop(struct soc_camera_device *icd,
 				  const struct v4l2_crop *a)
 {
-	struct v4l2_rect *rect = &a->c;
+	struct v4l2_crop a_writable = *a;
+	const struct v4l2_rect *rect = &a_writable.c;
 	struct device *dev = icd->parent;
 	struct soc_camera_host *ici = to_soc_camera_host(dev);
 	struct sh_mobile_ceu_dev *pcdev = ici->priv;
@@ -1545,7 +1546,7 @@
 	 * 1. - 2. Apply iterative camera S_CROP for new input window, read back
 	 * actual camera rectangle.
 	 */
-	ret = client_s_crop(icd, a, &cam_crop);
+	ret = client_s_crop(icd, &a_writable, &cam_crop);
 	if (ret < 0)
 		return ret;
 
@@ -1946,7 +1947,7 @@
 }
 
 static int sh_mobile_ceu_set_livecrop(struct soc_camera_device *icd,
-				      struct v4l2_crop *a)
+				      const struct v4l2_crop *a)
 {
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
diff --git a/drivers/media/usb/dvb-usb-v2/dvb_usb_core.c b/drivers/media/usb/dvb-usb-v2/dvb_usb_core.c
index 9859d2a..ba51f65 100644
--- a/drivers/media/usb/dvb-usb-v2/dvb_usb_core.c
+++ b/drivers/media/usb/dvb-usb-v2/dvb_usb_core.c
@@ -283,14 +283,13 @@
 
 	/* activate the pid on the device pid filter */
 	if (adap->props->caps & DVB_USB_ADAP_HAS_PID_FILTER &&
-			adap->pid_filtering &&
-			adap->props->pid_filter)
+			adap->pid_filtering && adap->props->pid_filter) {
 		ret = adap->props->pid_filter(adap, dvbdmxfeed->index,
 				dvbdmxfeed->pid, (count == 1) ? 1 : 0);
-			if (ret < 0)
-				dev_err(&d->udev->dev, "%s: pid_filter() " \
-						"failed=%d\n", KBUILD_MODNAME,
-						ret);
+		if (ret < 0)
+			dev_err(&d->udev->dev, "%s: pid_filter() failed=%d\n",
+					KBUILD_MODNAME, ret);
+	}
 
 	/* start feeding if it is first pid */
 	if (adap->feed_count == 1 && count == 1) {
diff --git a/drivers/media/usb/dvb-usb-v2/dvb_usb_urb.c b/drivers/media/usb/dvb-usb-v2/dvb_usb_urb.c
index 0431bee..5716662 100644
--- a/drivers/media/usb/dvb-usb-v2/dvb_usb_urb.c
+++ b/drivers/media/usb/dvb-usb-v2/dvb_usb_urb.c
@@ -32,9 +32,7 @@
 		return -EINVAL;
 	}
 
-	ret = mutex_lock_interruptible(&d->usb_mutex);
-	if (ret < 0)
-		return ret;
+	mutex_lock(&d->usb_mutex);
 
 	dev_dbg(&d->udev->dev, "%s: >>> %*ph\n", __func__, wlen, wbuf);
 
diff --git a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
index adabba8..093f1ac 100644
--- a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
+++ b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
@@ -1346,6 +1346,10 @@
 		&rtl2832u_props, "DigitalNow Quad DVB-T Receiver", NULL) },
 	{ DVB_USB_DEVICE(USB_VID_TERRATEC, 0x00d3,
 		&rtl2832u_props, "TerraTec Cinergy T Stick RC (Rev. 3)", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_DEXATEK, 0x1102,
+		&rtl2832u_props, "Dexatek DK mini DVB-T Dongle", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_TERRATEC, 0x00d7,
+		&rtl2832u_props, "TerraTec Cinergy T Stick+", NULL) },
 	{ }
 };
 MODULE_DEVICE_TABLE(usb, rtl28xxu_id_table);
diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c
index 12fdabf..1a6f943f 100644
--- a/drivers/mfd/arizona-core.c
+++ b/drivers/mfd/arizona-core.c
@@ -98,9 +98,9 @@
 
 	if (val & ARIZONA_AIF3_UNDERCLOCKED_STS)
 		dev_err(arizona->dev, "AIF3 underclocked\n");
-	if (val & ARIZONA_AIF3_UNDERCLOCKED_STS)
-		dev_err(arizona->dev, "AIF3 underclocked\n");
 	if (val & ARIZONA_AIF2_UNDERCLOCKED_STS)
+		dev_err(arizona->dev, "AIF2 underclocked\n");
+	if (val & ARIZONA_AIF1_UNDERCLOCKED_STS)
 		dev_err(arizona->dev, "AIF1 underclocked\n");
 	if (val & ARIZONA_ISRC2_UNDERCLOCKED_STS)
 		dev_err(arizona->dev, "ISRC2 underclocked\n");
@@ -415,11 +415,19 @@
 
 	/* If we have a /RESET GPIO we'll already be reset */
 	if (!arizona->pdata.reset) {
+		regcache_mark_dirty(arizona->regmap);
+
 		ret = regmap_write(arizona->regmap, ARIZONA_SOFTWARE_RESET, 0);
 		if (ret != 0) {
 			dev_err(dev, "Failed to reset device: %d\n", ret);
 			goto err_reset;
 		}
+
+		ret = regcache_sync(arizona->regmap);
+		if (ret != 0) {
+			dev_err(dev, "Failed to sync device: %d\n", ret);
+			goto err_reset;
+		}
 	}
 
 	ret = arizona_wait_for_boot(arizona);
@@ -520,7 +528,7 @@
 		break;
 	case WM5110:
 		ret = mfd_add_devices(arizona->dev, -1, wm5110_devs,
-				      ARRAY_SIZE(wm5102_devs), NULL, 0, NULL);
+				      ARRAY_SIZE(wm5110_devs), NULL, 0, NULL);
 		break;
 	}
 
diff --git a/drivers/mfd/arizona-irq.c b/drivers/mfd/arizona-irq.c
index ef0f2d00..b1b0091 100644
--- a/drivers/mfd/arizona-irq.c
+++ b/drivers/mfd/arizona-irq.c
@@ -178,6 +178,7 @@
 
 		switch (arizona->rev) {
 		case 0:
+		case 1:
 			ctrlif_error = false;
 			break;
 		default:
diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c
index 084a587..dc56915 100644
--- a/drivers/mfd/db8500-prcmu.c
+++ b/drivers/mfd/db8500-prcmu.c
@@ -31,6 +31,7 @@
 #include <linux/mfd/abx500/ab8500.h>
 #include <linux/regulator/db8500-prcmu.h>
 #include <linux/regulator/machine.h>
+#include <linux/cpufreq.h>
 #include <asm/hardware/gic.h>
 #include <mach/hardware.h>
 #include <mach/irqs.h>
@@ -420,9 +421,6 @@
 
 static atomic_t ac_wake_req_state = ATOMIC_INIT(0);
 
-/* Functions definition */
-static void compute_armss_rate(void);
-
 /* Spinlocks */
 static DEFINE_SPINLOCK(prcmu_lock);
 static DEFINE_SPINLOCK(clkout_lock);
@@ -1019,7 +1017,6 @@
 		(mb1_transfer.ack.arm_opp != opp))
 		r = -EIO;
 
-	compute_armss_rate();
 	mutex_unlock(&mb1_transfer.lock);
 
 	return r;
@@ -1169,12 +1166,12 @@
 }
 
 /**
- * prcmu_request_ape_opp_100_voltage - Request APE OPP 100% voltage
+ * db8500_prcmu_request_ape_opp_100_voltage - Request APE OPP 100% voltage
  * @enable: true to request the higher voltage, false to drop a request.
  *
  * Calls to this function to enable and disable requests must be balanced.
  */
-int prcmu_request_ape_opp_100_voltage(bool enable)
+int db8500_prcmu_request_ape_opp_100_voltage(bool enable)
 {
 	int r = 0;
 	u8 header;
@@ -1669,13 +1666,8 @@
 	else
 		return 0;
 }
-static unsigned long latest_armss_rate;
-static unsigned long armss_rate(void)
-{
-	return latest_armss_rate;
-}
 
-static void compute_armss_rate(void)
+static unsigned long armss_rate(void)
 {
 	u32 r;
 	unsigned long rate;
@@ -1700,7 +1692,7 @@
 		rate = pll_rate(PRCM_PLLARM_FREQ, ROOT_CLOCK_RATE, PLL_DIV);
 	}
 
-	latest_armss_rate = rate;
+	return rate;
 }
 
 static unsigned long dsiclk_rate(u8 n)
@@ -1820,6 +1812,35 @@
 	return rounded_rate;
 }
 
+/* CPU FREQ table, may be changed due to if MAX_OPP is supported. */
+static struct cpufreq_frequency_table db8500_cpufreq_table[] = {
+	{ .frequency = 200000, .index = ARM_EXTCLK,},
+	{ .frequency = 400000, .index = ARM_50_OPP,},
+	{ .frequency = 800000, .index = ARM_100_OPP,},
+	{ .frequency = CPUFREQ_TABLE_END,}, /* To be used for MAX_OPP. */
+	{ .frequency = CPUFREQ_TABLE_END,},
+};
+
+static long round_armss_rate(unsigned long rate)
+{
+	long freq = 0;
+	int i = 0;
+
+	/* cpufreq table frequencies is in KHz. */
+	rate = rate / 1000;
+
+	/* Find the corresponding arm opp from the cpufreq table. */
+	while (db8500_cpufreq_table[i].frequency != CPUFREQ_TABLE_END) {
+		freq = db8500_cpufreq_table[i].frequency;
+		if (freq == rate)
+			break;
+		i++;
+	}
+
+	/* Return the last valid value, even if a match was not found. */
+	return freq * 1000;
+}
+
 #define MIN_PLL_VCO_RATE 600000000ULL
 #define MAX_PLL_VCO_RATE 1680640000ULL
 
@@ -1891,6 +1912,8 @@
 {
 	if (clock < PRCMU_NUM_REG_CLOCKS)
 		return round_clock_rate(clock, rate);
+	else if (clock == PRCMU_ARMSS)
+		return round_armss_rate(rate);
 	else if (clock == PRCMU_PLLDSI)
 		return round_plldsi_rate(rate);
 	else if ((clock == PRCMU_DSI0CLK) || (clock == PRCMU_DSI1CLK))
@@ -1950,6 +1973,27 @@
 	spin_unlock_irqrestore(&clk_mgt_lock, flags);
 }
 
+static int set_armss_rate(unsigned long rate)
+{
+	int i = 0;
+
+	/* cpufreq table frequencies is in KHz. */
+	rate = rate / 1000;
+
+	/* Find the corresponding arm opp from the cpufreq table. */
+	while (db8500_cpufreq_table[i].frequency != CPUFREQ_TABLE_END) {
+		if (db8500_cpufreq_table[i].frequency == rate)
+			break;
+		i++;
+	}
+
+	if (db8500_cpufreq_table[i].frequency != rate)
+		return -EINVAL;
+
+	/* Set the new arm opp. */
+	return db8500_prcmu_set_arm_opp(db8500_cpufreq_table[i].index);
+}
+
 static int set_plldsi_rate(unsigned long rate)
 {
 	unsigned long src_rate;
@@ -2030,6 +2074,8 @@
 {
 	if (clock < PRCMU_NUM_REG_CLOCKS)
 		set_clock_rate(clock, rate);
+	else if (clock == PRCMU_ARMSS)
+		return set_armss_rate(rate);
 	else if (clock == PRCMU_PLLDSI)
 		return set_plldsi_rate(rate);
 	else if ((clock == PRCMU_DSI0CLK) || (clock == PRCMU_DSI1CLK))
@@ -2754,8 +2800,6 @@
 	init_completion(&mb5_transfer.work);
 
 	INIT_WORK(&mb0_transfer.mask_work, prcmu_mask_work);
-
-	compute_armss_rate();
 }
 
 static void __init init_prcm_registers(void)
@@ -3020,6 +3064,8 @@
 	{
 		.name = "cpufreq-u8500",
 		.of_compatible = "stericsson,cpufreq-u8500",
+		.platform_data = &db8500_cpufreq_table,
+		.pdata_size = sizeof(db8500_cpufreq_table),
 	},
 	{
 		.name = "ab8500-core",
@@ -3030,6 +3076,14 @@
 	},
 };
 
+static void db8500_prcmu_update_cpufreq(void)
+{
+	if (prcmu_has_arm_maxopp()) {
+		db8500_cpufreq_table[3].frequency = 1000000;
+		db8500_cpufreq_table[3].index = ARM_MAX_OPP;
+	}
+}
+
 /**
  * prcmu_fw_init - arch init call for the Linux PRCMU fw init logic
  *
@@ -3074,6 +3128,8 @@
 	if (cpu_is_u8500v20_or_later())
 		prcmu_config_esram0_deep_sleep(ESRAM0_DEEP_SLEEP_STATE_RET);
 
+	db8500_prcmu_update_cpufreq();
+
 	err = mfd_add_devices(&pdev->dev, 0, db8500_prcmu_devs,
 			      ARRAY_SIZE(db8500_prcmu_devs), NULL, 0, NULL);
 	if (err) {
diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c
index c94f521..79e88d1 100644
--- a/drivers/mfd/stmpe.c
+++ b/drivers/mfd/stmpe.c
@@ -294,12 +294,14 @@
 
 static struct mfd_cell stmpe_gpio_cell = {
 	.name		= "stmpe-gpio",
+	.of_compatible	= "st,stmpe-gpio",
 	.resources	= stmpe_gpio_resources,
 	.num_resources	= ARRAY_SIZE(stmpe_gpio_resources),
 };
 
 static struct mfd_cell stmpe_gpio_cell_noirq = {
 	.name		= "stmpe-gpio",
+	.of_compatible	= "st,stmpe-gpio",
 	/* gpio cell resources consist of an irq only so no resources here */
 };
 
diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c
index 271d98a..11b76c0 100644
--- a/drivers/mfd/twl-core.c
+++ b/drivers/mfd/twl-core.c
@@ -671,7 +671,7 @@
 	}
 
 	if (IS_ENABLED(CONFIG_PWM_TWL6030) && twl_class_is_6030()) {
-		child = add_child(TWL6030_MODULE_ID1, "twl6030-pwm", NULL, 0,
+		child = add_child(SUB_CHIP_ID1, "twl6030-pwm", NULL, 0,
 				  false, 0, 0);
 		if (IS_ERR(child))
 			return PTR_ERR(child);
diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c
index ad733d7..cdd1173 100644
--- a/drivers/mfd/twl4030-irq.c
+++ b/drivers/mfd/twl4030-irq.c
@@ -672,7 +672,8 @@
 	irq = sih_mod + twl4030_irq_base;
 	irq_set_handler_data(irq, agent);
 	agent->irq_name = kasprintf(GFP_KERNEL, "twl4030_%s", sih->name);
-	status = request_threaded_irq(irq, NULL, handle_twl4030_sih, 0,
+	status = request_threaded_irq(irq, NULL, handle_twl4030_sih,
+				      IRQF_EARLY_RESUME,
 				      agent->irq_name ?: sih->name, NULL);
 
 	dev_info(dev, "%s (irq %d) chaining IRQs %d..%d\n", sih->name,
diff --git a/drivers/mfd/wm5102-tables.c b/drivers/mfd/wm5102-tables.c
index 01b9255..14490cc 100644
--- a/drivers/mfd/wm5102-tables.c
+++ b/drivers/mfd/wm5102-tables.c
@@ -43,6 +43,7 @@
 	{ 0x479, 0x0A30 },
 	{ 0x47B, 0x0810 },
 	{ 0x47D, 0x0510 },
+	{ 0x4D1, 0x017F },
 	{ 0x500, 0x000D },
 	{ 0x507, 0x1820 },
 	{ 0x508, 0x1820 },
@@ -52,524 +53,6 @@
 	{ 0x580, 0x000D },
 	{ 0x587, 0x1820 },
 	{ 0x588, 0x1820 },
-	{ 0x101, 0x8140 },
-	{ 0x3000, 0x2225 },
-	{ 0x3001, 0x3a03 },
-	{ 0x3002, 0x0225 },
-	{ 0x3003, 0x0801 },
-	{ 0x3004, 0x6249 },
-	{ 0x3005, 0x0c04 },
-	{ 0x3006, 0x0225 },
-	{ 0x3007, 0x5901 },
-	{ 0x3008, 0xe249 },
-	{ 0x3009, 0x030d },
-	{ 0x300a, 0x0249 },
-	{ 0x300b, 0x2c01 },
-	{ 0x300c, 0xe249 },
-	{ 0x300d, 0x4342 },
-	{ 0x300e, 0xe249 },
-	{ 0x300f, 0x73c0 },
-	{ 0x3010, 0x4249 },
-	{ 0x3011, 0x0c00 },
-	{ 0x3012, 0x0225 },
-	{ 0x3013, 0x1f01 },
-	{ 0x3014, 0x0225 },
-	{ 0x3015, 0x1e01 },
-	{ 0x3016, 0x0225 },
-	{ 0x3017, 0xfa00 },
-	{ 0x3018, 0x0000 },
-	{ 0x3019, 0xf000 },
-	{ 0x301a, 0x0000 },
-	{ 0x301b, 0xf000 },
-	{ 0x301c, 0x0000 },
-	{ 0x301d, 0xf000 },
-	{ 0x301e, 0x0000 },
-	{ 0x301f, 0xf000 },
-	{ 0x3020, 0x0000 },
-	{ 0x3021, 0xf000 },
-	{ 0x3022, 0x0000 },
-	{ 0x3023, 0xf000 },
-	{ 0x3024, 0x0000 },
-	{ 0x3025, 0xf000 },
-	{ 0x3026, 0x0000 },
-	{ 0x3027, 0xf000 },
-	{ 0x3028, 0x0000 },
-	{ 0x3029, 0xf000 },
-	{ 0x302a, 0x0000 },
-	{ 0x302b, 0xf000 },
-	{ 0x302c, 0x0000 },
-	{ 0x302d, 0xf000 },
-	{ 0x302e, 0x0000 },
-	{ 0x302f, 0xf000 },
-	{ 0x3030, 0x0225 },
-	{ 0x3031, 0x1a01 },
-	{ 0x3032, 0x0225 },
-	{ 0x3033, 0x1e00 },
-	{ 0x3034, 0x0225 },
-	{ 0x3035, 0x1f00 },
-	{ 0x3036, 0x6225 },
-	{ 0x3037, 0xf800 },
-	{ 0x3038, 0x0000 },
-	{ 0x3039, 0xf000 },
-	{ 0x303a, 0x0000 },
-	{ 0x303b, 0xf000 },
-	{ 0x303c, 0x0000 },
-	{ 0x303d, 0xf000 },
-	{ 0x303e, 0x0000 },
-	{ 0x303f, 0xf000 },
-	{ 0x3040, 0x2226 },
-	{ 0x3041, 0x3a03 },
-	{ 0x3042, 0x0226 },
-	{ 0x3043, 0x0801 },
-	{ 0x3044, 0x6249 },
-	{ 0x3045, 0x0c06 },
-	{ 0x3046, 0x0226 },
-	{ 0x3047, 0x5901 },
-	{ 0x3048, 0xe249 },
-	{ 0x3049, 0x030d },
-	{ 0x304a, 0x0249 },
-	{ 0x304b, 0x2c01 },
-	{ 0x304c, 0xe249 },
-	{ 0x304d, 0x4342 },
-	{ 0x304e, 0xe249 },
-	{ 0x304f, 0x73c0 },
-	{ 0x3050, 0x4249 },
-	{ 0x3051, 0x0c00 },
-	{ 0x3052, 0x0226 },
-	{ 0x3053, 0x1f01 },
-	{ 0x3054, 0x0226 },
-	{ 0x3055, 0x1e01 },
-	{ 0x3056, 0x0226 },
-	{ 0x3057, 0xfa00 },
-	{ 0x3058, 0x0000 },
-	{ 0x3059, 0xf000 },
-	{ 0x305a, 0x0000 },
-	{ 0x305b, 0xf000 },
-	{ 0x305c, 0x0000 },
-	{ 0x305d, 0xf000 },
-	{ 0x305e, 0x0000 },
-	{ 0x305f, 0xf000 },
-	{ 0x3060, 0x0000 },
-	{ 0x3061, 0xf000 },
-	{ 0x3062, 0x0000 },
-	{ 0x3063, 0xf000 },
-	{ 0x3064, 0x0000 },
-	{ 0x3065, 0xf000 },
-	{ 0x3066, 0x0000 },
-	{ 0x3067, 0xf000 },
-	{ 0x3068, 0x0000 },
-	{ 0x3069, 0xf000 },
-	{ 0x306a, 0x0000 },
-	{ 0x306b, 0xf000 },
-	{ 0x306c, 0x0000 },
-	{ 0x306d, 0xf000 },
-	{ 0x306e, 0x0000 },
-	{ 0x306f, 0xf000 },
-	{ 0x3070, 0x0226 },
-	{ 0x3071, 0x1a01 },
-	{ 0x3072, 0x0226 },
-	{ 0x3073, 0x1e00 },
-	{ 0x3074, 0x0226 },
-	{ 0x3075, 0x1f00 },
-	{ 0x3076, 0x6226 },
-	{ 0x3077, 0xf800 },
-	{ 0x3078, 0x0000 },
-	{ 0x3079, 0xf000 },
-	{ 0x307a, 0x0000 },
-	{ 0x307b, 0xf000 },
-	{ 0x307c, 0x0000 },
-	{ 0x307d, 0xf000 },
-	{ 0x307e, 0x0000 },
-	{ 0x307f, 0xf000 },
-	{ 0x3080, 0x2227 },
-	{ 0x3081, 0x3a03 },
-	{ 0x3082, 0x0227 },
-	{ 0x3083, 0x0801 },
-	{ 0x3084, 0x6255 },
-	{ 0x3085, 0x0c04 },
-	{ 0x3086, 0x0227 },
-	{ 0x3087, 0x5901 },
-	{ 0x3088, 0xe255 },
-	{ 0x3089, 0x030d },
-	{ 0x308a, 0x0255 },
-	{ 0x308b, 0x2c01 },
-	{ 0x308c, 0xe255 },
-	{ 0x308d, 0x4342 },
-	{ 0x308e, 0xe255 },
-	{ 0x308f, 0x73c0 },
-	{ 0x3090, 0x4255 },
-	{ 0x3091, 0x0c00 },
-	{ 0x3092, 0x0227 },
-	{ 0x3093, 0x1f01 },
-	{ 0x3094, 0x0227 },
-	{ 0x3095, 0x1e01 },
-	{ 0x3096, 0x0227 },
-	{ 0x3097, 0xfa00 },
-	{ 0x3098, 0x0000 },
-	{ 0x3099, 0xf000 },
-	{ 0x309a, 0x0000 },
-	{ 0x309b, 0xf000 },
-	{ 0x309c, 0x0000 },
-	{ 0x309d, 0xf000 },
-	{ 0x309e, 0x0000 },
-	{ 0x309f, 0xf000 },
-	{ 0x30a0, 0x0000 },
-	{ 0x30a1, 0xf000 },
-	{ 0x30a2, 0x0000 },
-	{ 0x30a3, 0xf000 },
-	{ 0x30a4, 0x0000 },
-	{ 0x30a5, 0xf000 },
-	{ 0x30a6, 0x0000 },
-	{ 0x30a7, 0xf000 },
-	{ 0x30a8, 0x0000 },
-	{ 0x30a9, 0xf000 },
-	{ 0x30aa, 0x0000 },
-	{ 0x30ab, 0xf000 },
-	{ 0x30ac, 0x0000 },
-	{ 0x30ad, 0xf000 },
-	{ 0x30ae, 0x0000 },
-	{ 0x30af, 0xf000 },
-	{ 0x30b0, 0x0227 },
-	{ 0x30b1, 0x1a01 },
-	{ 0x30b2, 0x0227 },
-	{ 0x30b3, 0x1e00 },
-	{ 0x30b4, 0x0227 },
-	{ 0x30b5, 0x1f00 },
-	{ 0x30b6, 0x6227 },
-	{ 0x30b7, 0xf800 },
-	{ 0x30b8, 0x0000 },
-	{ 0x30b9, 0xf000 },
-	{ 0x30ba, 0x0000 },
-	{ 0x30bb, 0xf000 },
-	{ 0x30bc, 0x0000 },
-	{ 0x30bd, 0xf000 },
-	{ 0x30be, 0x0000 },
-	{ 0x30bf, 0xf000 },
-	{ 0x30c0, 0x2228 },
-	{ 0x30c1, 0x3a03 },
-	{ 0x30c2, 0x0228 },
-	{ 0x30c3, 0x0801 },
-	{ 0x30c4, 0x6255 },
-	{ 0x30c5, 0x0c06 },
-	{ 0x30c6, 0x0228 },
-	{ 0x30c7, 0x5901 },
-	{ 0x30c8, 0xe255 },
-	{ 0x30c9, 0x030d },
-	{ 0x30ca, 0x0255 },
-	{ 0x30cb, 0x2c01 },
-	{ 0x30cc, 0xe255 },
-	{ 0x30cd, 0x4342 },
-	{ 0x30ce, 0xe255 },
-	{ 0x30cf, 0x73c0 },
-	{ 0x30d0, 0x4255 },
-	{ 0x30d1, 0x0c00 },
-	{ 0x30d2, 0x0228 },
-	{ 0x30d3, 0x1f01 },
-	{ 0x30d4, 0x0228 },
-	{ 0x30d5, 0x1e01 },
-	{ 0x30d6, 0x0228 },
-	{ 0x30d7, 0xfa00 },
-	{ 0x30d8, 0x0000 },
-	{ 0x30d9, 0xf000 },
-	{ 0x30da, 0x0000 },
-	{ 0x30db, 0xf000 },
-	{ 0x30dc, 0x0000 },
-	{ 0x30dd, 0xf000 },
-	{ 0x30de, 0x0000 },
-	{ 0x30df, 0xf000 },
-	{ 0x30e0, 0x0000 },
-	{ 0x30e1, 0xf000 },
-	{ 0x30e2, 0x0000 },
-	{ 0x30e3, 0xf000 },
-	{ 0x30e4, 0x0000 },
-	{ 0x30e5, 0xf000 },
-	{ 0x30e6, 0x0000 },
-	{ 0x30e7, 0xf000 },
-	{ 0x30e8, 0x0000 },
-	{ 0x30e9, 0xf000 },
-	{ 0x30ea, 0x0000 },
-	{ 0x30eb, 0xf000 },
-	{ 0x30ec, 0x0000 },
-	{ 0x30ed, 0xf000 },
-	{ 0x30ee, 0x0000 },
-	{ 0x30ef, 0xf000 },
-	{ 0x30f0, 0x0228 },
-	{ 0x30f1, 0x1a01 },
-	{ 0x30f2, 0x0228 },
-	{ 0x30f3, 0x1e00 },
-	{ 0x30f4, 0x0228 },
-	{ 0x30f5, 0x1f00 },
-	{ 0x30f6, 0x6228 },
-	{ 0x30f7, 0xf800 },
-	{ 0x30f8, 0x0000 },
-	{ 0x30f9, 0xf000 },
-	{ 0x30fa, 0x0000 },
-	{ 0x30fb, 0xf000 },
-	{ 0x30fc, 0x0000 },
-	{ 0x30fd, 0xf000 },
-	{ 0x30fe, 0x0000 },
-	{ 0x30ff, 0xf000 },
-	{ 0x3100, 0x222b },
-	{ 0x3101, 0x3a03 },
-	{ 0x3102, 0x222b },
-	{ 0x3103, 0x5803 },
-	{ 0x3104, 0xe26f },
-	{ 0x3105, 0x030d },
-	{ 0x3106, 0x626f },
-	{ 0x3107, 0x2c01 },
-	{ 0x3108, 0xe26f },
-	{ 0x3109, 0x4342 },
-	{ 0x310a, 0xe26f },
-	{ 0x310b, 0x73c0 },
-	{ 0x310c, 0x026f },
-	{ 0x310d, 0x0c00 },
-	{ 0x310e, 0x022b },
-	{ 0x310f, 0x1f01 },
-	{ 0x3110, 0x022b },
-	{ 0x3111, 0x1e01 },
-	{ 0x3112, 0x022b },
-	{ 0x3113, 0xfa00 },
-	{ 0x3114, 0x0000 },
-	{ 0x3115, 0xf000 },
-	{ 0x3116, 0x0000 },
-	{ 0x3117, 0xf000 },
-	{ 0x3118, 0x0000 },
-	{ 0x3119, 0xf000 },
-	{ 0x311a, 0x0000 },
-	{ 0x311b, 0xf000 },
-	{ 0x311c, 0x0000 },
-	{ 0x311d, 0xf000 },
-	{ 0x311e, 0x0000 },
-	{ 0x311f, 0xf000 },
-	{ 0x3120, 0x022b },
-	{ 0x3121, 0x0a01 },
-	{ 0x3122, 0x022b },
-	{ 0x3123, 0x1e00 },
-	{ 0x3124, 0x022b },
-	{ 0x3125, 0x1f00 },
-	{ 0x3126, 0x622b },
-	{ 0x3127, 0xf800 },
-	{ 0x3128, 0x0000 },
-	{ 0x3129, 0xf000 },
-	{ 0x312a, 0x0000 },
-	{ 0x312b, 0xf000 },
-	{ 0x312c, 0x0000 },
-	{ 0x312d, 0xf000 },
-	{ 0x312e, 0x0000 },
-	{ 0x312f, 0xf000 },
-	{ 0x3130, 0x0000 },
-	{ 0x3131, 0xf000 },
-	{ 0x3132, 0x0000 },
-	{ 0x3133, 0xf000 },
-	{ 0x3134, 0x0000 },
-	{ 0x3135, 0xf000 },
-	{ 0x3136, 0x0000 },
-	{ 0x3137, 0xf000 },
-	{ 0x3138, 0x0000 },
-	{ 0x3139, 0xf000 },
-	{ 0x313a, 0x0000 },
-	{ 0x313b, 0xf000 },
-	{ 0x313c, 0x0000 },
-	{ 0x313d, 0xf000 },
-	{ 0x313e, 0x0000 },
-	{ 0x313f, 0xf000 },
-	{ 0x3140, 0x0000 },
-	{ 0x3141, 0xf000 },
-	{ 0x3142, 0x0000 },
-	{ 0x3143, 0xf000 },
-	{ 0x3144, 0x0000 },
-	{ 0x3145, 0xf000 },
-	{ 0x3146, 0x0000 },
-	{ 0x3147, 0xf000 },
-	{ 0x3148, 0x0000 },
-	{ 0x3149, 0xf000 },
-	{ 0x314a, 0x0000 },
-	{ 0x314b, 0xf000 },
-	{ 0x314c, 0x0000 },
-	{ 0x314d, 0xf000 },
-	{ 0x314e, 0x0000 },
-	{ 0x314f, 0xf000 },
-	{ 0x3150, 0x0000 },
-	{ 0x3151, 0xf000 },
-	{ 0x3152, 0x0000 },
-	{ 0x3153, 0xf000 },
-	{ 0x3154, 0x0000 },
-	{ 0x3155, 0xf000 },
-	{ 0x3156, 0x0000 },
-	{ 0x3157, 0xf000 },
-	{ 0x3158, 0x0000 },
-	{ 0x3159, 0xf000 },
-	{ 0x315a, 0x0000 },
-	{ 0x315b, 0xf000 },
-	{ 0x315c, 0x0000 },
-	{ 0x315d, 0xf000 },
-	{ 0x315e, 0x0000 },
-	{ 0x315f, 0xf000 },
-	{ 0x3160, 0x0000 },
-	{ 0x3161, 0xf000 },
-	{ 0x3162, 0x0000 },
-	{ 0x3163, 0xf000 },
-	{ 0x3164, 0x0000 },
-	{ 0x3165, 0xf000 },
-	{ 0x3166, 0x0000 },
-	{ 0x3167, 0xf000 },
-	{ 0x3168, 0x0000 },
-	{ 0x3169, 0xf000 },
-	{ 0x316a, 0x0000 },
-	{ 0x316b, 0xf000 },
-	{ 0x316c, 0x0000 },
-	{ 0x316d, 0xf000 },
-	{ 0x316e, 0x0000 },
-	{ 0x316f, 0xf000 },
-	{ 0x3170, 0x0000 },
-	{ 0x3171, 0xf000 },
-	{ 0x3172, 0x0000 },
-	{ 0x3173, 0xf000 },
-	{ 0x3174, 0x0000 },
-	{ 0x3175, 0xf000 },
-	{ 0x3176, 0x0000 },
-	{ 0x3177, 0xf000 },
-	{ 0x3178, 0x0000 },
-	{ 0x3179, 0xf000 },
-	{ 0x317a, 0x0000 },
-	{ 0x317b, 0xf000 },
-	{ 0x317c, 0x0000 },
-	{ 0x317d, 0xf000 },
-	{ 0x317e, 0x0000 },
-	{ 0x317f, 0xf000 },
-	{ 0x3180, 0x2001 },
-	{ 0x3181, 0xf101 },
-	{ 0x3182, 0x0000 },
-	{ 0x3183, 0xf000 },
-	{ 0x3184, 0x0000 },
-	{ 0x3185, 0xf000 },
-	{ 0x3186, 0x0000 },
-	{ 0x3187, 0xf000 },
-	{ 0x3188, 0x0000 },
-	{ 0x3189, 0xf000 },
-	{ 0x318a, 0x0000 },
-	{ 0x318b, 0xf000 },
-	{ 0x318c, 0x0000 },
-	{ 0x318d, 0xf000 },
-	{ 0x318e, 0x0000 },
-	{ 0x318f, 0xf000 },
-	{ 0x3190, 0x0000 },
-	{ 0x3191, 0xf000 },
-	{ 0x3192, 0x0000 },
-	{ 0x3193, 0xf000 },
-	{ 0x3194, 0x0000 },
-	{ 0x3195, 0xf000 },
-	{ 0x3196, 0x0000 },
-	{ 0x3197, 0xf000 },
-	{ 0x3198, 0x0000 },
-	{ 0x3199, 0xf000 },
-	{ 0x319a, 0x0000 },
-	{ 0x319b, 0xf000 },
-	{ 0x319c, 0x0000 },
-	{ 0x319d, 0xf000 },
-	{ 0x319e, 0x0000 },
-	{ 0x319f, 0xf000 },
-	{ 0x31a0, 0x0000 },
-	{ 0x31a1, 0xf000 },
-	{ 0x31a2, 0x0000 },
-	{ 0x31a3, 0xf000 },
-	{ 0x31a4, 0x0000 },
-	{ 0x31a5, 0xf000 },
-	{ 0x31a6, 0x0000 },
-	{ 0x31a7, 0xf000 },
-	{ 0x31a8, 0x0000 },
-	{ 0x31a9, 0xf000 },
-	{ 0x31aa, 0x0000 },
-	{ 0x31ab, 0xf000 },
-	{ 0x31ac, 0x0000 },
-	{ 0x31ad, 0xf000 },
-	{ 0x31ae, 0x0000 },
-	{ 0x31af, 0xf000 },
-	{ 0x31b0, 0x0000 },
-	{ 0x31b1, 0xf000 },
-	{ 0x31b2, 0x0000 },
-	{ 0x31b3, 0xf000 },
-	{ 0x31b4, 0x0000 },
-	{ 0x31b5, 0xf000 },
-	{ 0x31b6, 0x0000 },
-	{ 0x31b7, 0xf000 },
-	{ 0x31b8, 0x0000 },
-	{ 0x31b9, 0xf000 },
-	{ 0x31ba, 0x0000 },
-	{ 0x31bb, 0xf000 },
-	{ 0x31bc, 0x0000 },
-	{ 0x31bd, 0xf000 },
-	{ 0x31be, 0x0000 },
-	{ 0x31bf, 0xf000 },
-	{ 0x31c0, 0x0000 },
-	{ 0x31c1, 0xf000 },
-	{ 0x31c2, 0x0000 },
-	{ 0x31c3, 0xf000 },
-	{ 0x31c4, 0x0000 },
-	{ 0x31c5, 0xf000 },
-	{ 0x31c6, 0x0000 },
-	{ 0x31c7, 0xf000 },
-	{ 0x31c8, 0x0000 },
-	{ 0x31c9, 0xf000 },
-	{ 0x31ca, 0x0000 },
-	{ 0x31cb, 0xf000 },
-	{ 0x31cc, 0x0000 },
-	{ 0x31cd, 0xf000 },
-	{ 0x31ce, 0x0000 },
-	{ 0x31cf, 0xf000 },
-	{ 0x31d0, 0x0000 },
-	{ 0x31d1, 0xf000 },
-	{ 0x31d2, 0x0000 },
-	{ 0x31d3, 0xf000 },
-	{ 0x31d4, 0x0000 },
-	{ 0x31d5, 0xf000 },
-	{ 0x31d6, 0x0000 },
-	{ 0x31d7, 0xf000 },
-	{ 0x31d8, 0x0000 },
-	{ 0x31d9, 0xf000 },
-	{ 0x31da, 0x0000 },
-	{ 0x31db, 0xf000 },
-	{ 0x31dc, 0x0000 },
-	{ 0x31dd, 0xf000 },
-	{ 0x31de, 0x0000 },
-	{ 0x31df, 0xf000 },
-	{ 0x31e0, 0x0000 },
-	{ 0x31e1, 0xf000 },
-	{ 0x31e2, 0x0000 },
-	{ 0x31e3, 0xf000 },
-	{ 0x31e4, 0x0000 },
-	{ 0x31e5, 0xf000 },
-	{ 0x31e6, 0x0000 },
-	{ 0x31e7, 0xf000 },
-	{ 0x31e8, 0x0000 },
-	{ 0x31e9, 0xf000 },
-	{ 0x31ea, 0x0000 },
-	{ 0x31eb, 0xf000 },
-	{ 0x31ec, 0x0000 },
-	{ 0x31ed, 0xf000 },
-	{ 0x31ee, 0x0000 },
-	{ 0x31ef, 0xf000 },
-	{ 0x31f0, 0x0000 },
-	{ 0x31f1, 0xf000 },
-	{ 0x31f2, 0x0000 },
-	{ 0x31f3, 0xf000 },
-	{ 0x31f4, 0x0000 },
-	{ 0x31f5, 0xf000 },
-	{ 0x31f6, 0x0000 },
-	{ 0x31f7, 0xf000 },
-	{ 0x31f8, 0x0000 },
-	{ 0x31f9, 0xf000 },
-	{ 0x31fa, 0x0000 },
-	{ 0x31fb, 0xf000 },
-	{ 0x31fc, 0x0000 },
-	{ 0x31fd, 0xf000 },
-	{ 0x31fe, 0x0000 },
-	{ 0x31ff, 0xf000 },
-	{ 0x024d, 0xff50 },
-	{ 0x0252, 0xff50 },
-	{ 0x0259, 0x0112 },
-	{ 0x025e, 0x0112 },
-	{ 0x101, 0x0304 },
 	{ 0x80, 0x0000 },
 };
 
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index 172a768..21056b9 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -57,6 +57,7 @@
 #define INAND_CMD38_ARG_SECERASE 0x80
 #define INAND_CMD38_ARG_SECTRIM1 0x81
 #define INAND_CMD38_ARG_SECTRIM2 0x88
+#define MMC_BLK_TIMEOUT_MS  (10 * 60 * 1000)        /* 10 minute timeout */
 
 static DEFINE_MUTEX(block_mutex);
 
@@ -126,6 +127,10 @@
 module_param(perdev_minors, int, 0444);
 MODULE_PARM_DESC(perdev_minors, "Minors numbers to allocate per device");
 
+static inline int mmc_blk_part_switch(struct mmc_card *card,
+				      struct mmc_blk_data *md);
+static int get_card_status(struct mmc_card *card, u32 *status, int retries);
+
 static struct mmc_blk_data *mmc_blk_get(struct gendisk *disk)
 {
 	struct mmc_blk_data *md;
@@ -357,6 +362,38 @@
 	return ERR_PTR(err);
 }
 
+static int ioctl_rpmb_card_status_poll(struct mmc_card *card, u32 *status,
+				       u32 retries_max)
+{
+	int err;
+	u32 retry_count = 0;
+
+	if (!status || !retries_max)
+		return -EINVAL;
+
+	do {
+		err = get_card_status(card, status, 5);
+		if (err)
+			break;
+
+		if (!R1_STATUS(*status) &&
+				(R1_CURRENT_STATE(*status) != R1_STATE_PRG))
+			break; /* RPMB programming operation complete */
+
+		/*
+		 * Rechedule to give the MMC device a chance to continue
+		 * processing the previous command without being polled too
+		 * frequently.
+		 */
+		usleep_range(1000, 5000);
+	} while (++retry_count < retries_max);
+
+	if (retry_count == retries_max)
+		err = -EPERM;
+
+	return err;
+}
+
 static int mmc_blk_ioctl_cmd(struct block_device *bdev,
 	struct mmc_ioc_cmd __user *ic_ptr)
 {
@@ -368,6 +405,8 @@
 	struct mmc_request mrq = {NULL};
 	struct scatterlist sg;
 	int err;
+	int is_rpmb = false;
+	u32 status = 0;
 
 	/*
 	 * The caller must have CAP_SYS_RAWIO, and must be calling this on the
@@ -387,6 +426,9 @@
 		goto cmd_err;
 	}
 
+	if (md->area_type & MMC_BLK_DATA_AREA_RPMB)
+		is_rpmb = true;
+
 	card = md->queue.card;
 	if (IS_ERR(card)) {
 		err = PTR_ERR(card);
@@ -437,12 +479,23 @@
 
 	mmc_claim_host(card->host);
 
+	err = mmc_blk_part_switch(card, md);
+	if (err)
+		goto cmd_rel_host;
+
 	if (idata->ic.is_acmd) {
 		err = mmc_app_cmd(card->host, card);
 		if (err)
 			goto cmd_rel_host;
 	}
 
+	if (is_rpmb) {
+		err = mmc_set_blockcount(card, data.blocks,
+			idata->ic.write_flag & (1 << 31));
+		if (err)
+			goto cmd_rel_host;
+	}
+
 	mmc_wait_for_req(card->host, &mrq);
 
 	if (cmd.error) {
@@ -478,6 +531,18 @@
 		}
 	}
 
+	if (is_rpmb) {
+		/*
+		 * Ensure RPMB command has completed by polling CMD13
+		 * "Send Status".
+		 */
+		err = ioctl_rpmb_card_status_poll(card, &status, 5);
+		if (err)
+			dev_err(mmc_dev(card->host),
+					"%s: Card Status=0x%08X, error %d\n",
+					__func__, status, err);
+	}
+
 cmd_rel_host:
 	mmc_release_host(card->host);
 
@@ -1034,6 +1099,9 @@
 	 */
 	if (!mmc_host_is_spi(card->host) && rq_data_dir(req) != READ) {
 		u32 status;
+		unsigned long timeout;
+
+		timeout = jiffies + msecs_to_jiffies(MMC_BLK_TIMEOUT_MS);
 		do {
 			int err = get_card_status(card, &status, 5);
 			if (err) {
@@ -1041,6 +1109,17 @@
 				       req->rq_disk->disk_name, err);
 				return MMC_BLK_CMD_ERR;
 			}
+
+			/* Timeout if the device never becomes ready for data
+			 * and never leaves the program state.
+			 */
+			if (time_after(jiffies, timeout)) {
+				pr_err("%s: Card stuck in programming state!"\
+					" %s %s\n", mmc_hostname(card->host),
+					req->rq_disk->disk_name, __func__);
+
+				return MMC_BLK_CMD_ERR;
+			}
 			/*
 			 * Some cards mishandle the status bits,
 			 * so make sure to check both the busy
@@ -1504,6 +1583,8 @@
 	md->disk->queue = md->queue.queue;
 	md->disk->driverfs_dev = parent;
 	set_disk_ro(md->disk, md->read_only || default_ro);
+	if (area_type & MMC_BLK_DATA_AREA_RPMB)
+		md->disk->flags |= GENHD_FL_NO_PART_SCAN;
 
 	/*
 	 * As discussed on lkml, GENHD_FL_REMOVABLE should:
diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c
index e360a97..fadf52e 100644
--- a/drivers/mmc/card/queue.c
+++ b/drivers/mmc/card/queue.c
@@ -68,6 +68,16 @@
 		if (req || mq->mqrq_prev->req) {
 			set_current_state(TASK_RUNNING);
 			mq->issue_fn(mq, req);
+
+			/*
+			 * Current request becomes previous request
+			 * and vice versa.
+			 */
+			mq->mqrq_prev->brq.mrq.data = NULL;
+			mq->mqrq_prev->req = NULL;
+			tmp = mq->mqrq_prev;
+			mq->mqrq_prev = mq->mqrq_cur;
+			mq->mqrq_cur = tmp;
 		} else {
 			if (kthread_should_stop()) {
 				set_current_state(TASK_RUNNING);
@@ -77,13 +87,6 @@
 			schedule();
 			down(&mq->thread_sem);
 		}
-
-		/* Current request becomes previous request and vice versa. */
-		mq->mqrq_prev->brq.mrq.data = NULL;
-		mq->mqrq_prev->req = NULL;
-		tmp = mq->mqrq_prev;
-		mq->mqrq_prev = mq->mqrq_cur;
-		mq->mqrq_cur = tmp;
 	} while (1);
 	up(&mq->thread_sem);
 
diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c
index 9b68933..420cb67 100644
--- a/drivers/mmc/core/bus.c
+++ b/drivers/mmc/core/bus.c
@@ -225,8 +225,7 @@
 
 	sdio_free_common_cis(card);
 
-	if (card->info)
-		kfree(card->info);
+	kfree(card->info);
 
 	kfree(card);
 }
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 06c42cf..aaed768 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -42,6 +42,9 @@
 #include "sd_ops.h"
 #include "sdio_ops.h"
 
+/* If the device is not responding */
+#define MMC_CORE_TIMEOUT_MS	(10 * 60 * 1000) /* 10 minute timeout */
+
 /*
  * Background operations can take a long time, depending on the housekeeping
  * operations the card has to perform.
@@ -1631,6 +1634,7 @@
 {
 	struct mmc_command cmd = {0};
 	unsigned int qty = 0;
+	unsigned long timeout;
 	int err;
 
 	/*
@@ -1708,6 +1712,7 @@
 	if (mmc_host_is_spi(card->host))
 		goto out;
 
+	timeout = jiffies + msecs_to_jiffies(MMC_CORE_TIMEOUT_MS);
 	do {
 		memset(&cmd, 0, sizeof(struct mmc_command));
 		cmd.opcode = MMC_SEND_STATUS;
@@ -1721,8 +1726,19 @@
 			err = -EIO;
 			goto out;
 		}
+
+		/* Timeout if the device never becomes ready for data and
+		 * never leaves the program state.
+		 */
+		if (time_after(jiffies, timeout)) {
+			pr_err("%s: Card stuck in programming state! %s\n",
+				mmc_hostname(card->host), __func__);
+			err =  -EIO;
+			goto out;
+		}
+
 	} while (!(cmd.resp[0] & R1_READY_FOR_DATA) ||
-		 R1_CURRENT_STATE(cmd.resp[0]) == R1_STATE_PRG);
+		 (R1_CURRENT_STATE(cmd.resp[0]) == R1_STATE_PRG));
 out:
 	return err;
 }
@@ -1942,6 +1958,20 @@
 }
 EXPORT_SYMBOL(mmc_set_blocklen);
 
+int mmc_set_blockcount(struct mmc_card *card, unsigned int blockcount,
+			bool is_rel_write)
+{
+	struct mmc_command cmd = {0};
+
+	cmd.opcode = MMC_SET_BLOCK_COUNT;
+	cmd.arg = blockcount & 0x0000FFFF;
+	if (is_rel_write)
+		cmd.arg |= 1 << 31;
+	cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
+	return mmc_wait_for_cmd(card->host, &cmd, 5);
+}
+EXPORT_SYMBOL(mmc_set_blockcount);
+
 static void mmc_hw_reset_for_init(struct mmc_host *host)
 {
 	if (!(host->caps & MMC_CAP_HW_RESET) || !host->ops->hw_reset)
diff --git a/drivers/mmc/core/debugfs.c b/drivers/mmc/core/debugfs.c
index d96c643..35c2f85 100644
--- a/drivers/mmc/core/debugfs.c
+++ b/drivers/mmc/core/debugfs.c
@@ -144,6 +144,22 @@
 	}
 	seq_printf(s, "timing spec:\t%u (%s)\n", ios->timing, str);
 
+	switch (ios->signal_voltage) {
+	case MMC_SIGNAL_VOLTAGE_330:
+		str = "3.30 V";
+		break;
+	case MMC_SIGNAL_VOLTAGE_180:
+		str = "1.80 V";
+		break;
+	case MMC_SIGNAL_VOLTAGE_120:
+		str = "1.20 V";
+		break;
+	default:
+		str = "invalid";
+		break;
+	}
+	seq_printf(s, "signal voltage:\t%u (%s)\n", ios->chip_select, str);
+
 	return 0;
 }
 
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 7cc4638..e6e3911 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -239,7 +239,7 @@
 {
 	struct mmc_host *host = card->host;
 	u8 card_type = card->ext_csd.raw_card_type & EXT_CSD_CARD_TYPE_MASK;
-	unsigned int caps = host->caps, caps2 = host->caps2;
+	u32 caps = host->caps, caps2 = host->caps2;
 	unsigned int hs_max_dtr = 0;
 
 	if (card_type & EXT_CSD_CARD_TYPE_26)
@@ -491,6 +491,17 @@
 
 		card->ext_csd.rel_param = ext_csd[EXT_CSD_WR_REL_PARAM];
 		card->ext_csd.rst_n_function = ext_csd[EXT_CSD_RST_N_FUNCTION];
+
+		/*
+		 * RPMB regions are defined in multiples of 128K.
+		 */
+		card->ext_csd.raw_rpmb_size_mult = ext_csd[EXT_CSD_RPMB_MULT];
+		if (ext_csd[EXT_CSD_RPMB_MULT]) {
+			mmc_part_add(card, ext_csd[EXT_CSD_RPMB_MULT] << 17,
+				EXT_CSD_PART_CONFIG_ACC_RPMB,
+				"rpmb", 0, false,
+				MMC_BLK_DATA_AREA_RPMB);
+		}
 	}
 
 	card->ext_csd.raw_erased_mem_count = ext_csd[EXT_CSD_ERASED_MEM_CONT];
@@ -615,6 +626,8 @@
 MMC_DEV_ATTR(enhanced_area_offset, "%llu\n",
 		card->ext_csd.enhanced_area_offset);
 MMC_DEV_ATTR(enhanced_area_size, "%u\n", card->ext_csd.enhanced_area_size);
+MMC_DEV_ATTR(raw_rpmb_size_mult, "%#x\n", card->ext_csd.raw_rpmb_size_mult);
+MMC_DEV_ATTR(rel_sectors, "%#x\n", card->ext_csd.rel_sectors);
 
 static struct attribute *mmc_std_attrs[] = {
 	&dev_attr_cid.attr,
@@ -630,6 +643,8 @@
 	&dev_attr_serial.attr,
 	&dev_attr_enhanced_area_offset.attr,
 	&dev_attr_enhanced_area_size.attr,
+	&dev_attr_raw_rpmb_size_mult.attr,
+	&dev_attr_rel_sectors.attr,
 	NULL,
 };
 
@@ -1051,6 +1066,8 @@
 	if (mmc_card_highspeed(card) || mmc_card_hs200(card)) {
 		if (max_dtr > card->ext_csd.hs_max_dtr)
 			max_dtr = card->ext_csd.hs_max_dtr;
+		if (mmc_card_highspeed(card) && (max_dtr > 52000000))
+			max_dtr = 52000000;
 	} else if (max_dtr > card->csd.max_dtr) {
 		max_dtr = card->csd.max_dtr;
 	}
diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
index a0e1720..6d8f701 100644
--- a/drivers/mmc/core/mmc_ops.c
+++ b/drivers/mmc/core/mmc_ops.c
@@ -21,6 +21,8 @@
 #include "core.h"
 #include "mmc_ops.h"
 
+#define MMC_OPS_TIMEOUT_MS	(10 * 60 * 1000) /* 10 minute timeout */
+
 static int _mmc_select_card(struct mmc_host *host, struct mmc_card *card)
 {
 	int err;
@@ -409,6 +411,7 @@
 {
 	int err;
 	struct mmc_command cmd = {0};
+	unsigned long timeout;
 	u32 status;
 
 	BUG_ON(!card);
@@ -437,6 +440,7 @@
 		return 0;
 
 	/* Must check status to be sure of no errors */
+	timeout = jiffies + msecs_to_jiffies(MMC_OPS_TIMEOUT_MS);
 	do {
 		err = mmc_send_status(card, &status);
 		if (err)
@@ -445,6 +449,13 @@
 			break;
 		if (mmc_host_is_spi(card->host))
 			break;
+
+		/* Timeout if the device never leaves the program state. */
+		if (time_after(jiffies, timeout)) {
+			pr_err("%s: Card stuck in programming state! %s\n",
+				mmc_hostname(card->host), __func__);
+			return -ETIMEDOUT;
+		}
 	} while (R1_CURRENT_STATE(status) == R1_STATE_PRG);
 
 	if (mmc_host_is_spi(card->host)) {
diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c
index 6bf6879..5e57048 100644
--- a/drivers/mmc/core/sdio_bus.c
+++ b/drivers/mmc/core/sdio_bus.c
@@ -193,7 +193,21 @@
 }
 
 #ifdef CONFIG_PM
+
+#ifdef CONFIG_PM_SLEEP
+static int pm_no_operation(struct device *dev)
+{
+	/*
+	 * Prevent the PM core from calling SDIO device drivers' suspend
+	 * callback routines, which it is not supposed to do, by using this
+	 * empty function as the bus type suspend callaback for SDIO.
+	 */
+	return 0;
+}
+#endif
+
 static const struct dev_pm_ops sdio_bus_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(pm_no_operation, pm_no_operation)
 	SET_RUNTIME_PM_OPS(
 		pm_generic_runtime_suspend,
 		pm_generic_runtime_resume,
@@ -258,8 +272,7 @@
 
 	sdio_free_func_cis(func);
 
-	if (func->info)
-		kfree(func->info);
+	kfree(func->info);
 
 	kfree(func);
 }
diff --git a/drivers/mmc/core/sdio_io.c b/drivers/mmc/core/sdio_io.c
index 8f6f5ac..78cb4d5 100644
--- a/drivers/mmc/core/sdio_io.c
+++ b/drivers/mmc/core/sdio_io.c
@@ -188,8 +188,7 @@
  */
 static inline unsigned int sdio_max_byte_size(struct sdio_func *func)
 {
-	unsigned mval =	min(func->card->host->max_seg_size,
-			    func->card->host->max_blk_size);
+	unsigned mval =	func->card->host->max_blk_size;
 
 	if (mmc_blksz_for_byte_mode(func->card))
 		mval = min(mval, func->cur_blksize);
@@ -311,11 +310,8 @@
 	/* Do the bulk of the transfer using block mode (if supported). */
 	if (func->card->cccr.multi_block && (size > sdio_max_byte_size(func))) {
 		/* Blocks per command is limited by host count, host transfer
-		 * size (we only use a single sg entry) and the maximum for
-		 * IO_RW_EXTENDED of 511 blocks. */
-		max_blocks = min(func->card->host->max_blk_count,
-			func->card->host->max_seg_size / func->cur_blksize);
-		max_blocks = min(max_blocks, 511u);
+		 * size and the maximum for IO_RW_EXTENDED of 511 blocks. */
+		max_blocks = min(func->card->host->max_blk_count, 511u);
 
 		while (remainder >= func->cur_blksize) {
 			unsigned blocks;
diff --git a/drivers/mmc/core/sdio_ops.c b/drivers/mmc/core/sdio_ops.c
index d29e206..62508b4 100644
--- a/drivers/mmc/core/sdio_ops.c
+++ b/drivers/mmc/core/sdio_ops.c
@@ -124,7 +124,10 @@
 	struct mmc_request mrq = {NULL};
 	struct mmc_command cmd = {0};
 	struct mmc_data data = {0};
-	struct scatterlist sg;
+	struct scatterlist sg, *sg_ptr;
+	struct sg_table sgtable;
+	unsigned int nents, left_size, i;
+	unsigned int seg_size = card->host->max_seg_size;
 
 	BUG_ON(!card);
 	BUG_ON(fn > 7);
@@ -152,15 +155,36 @@
 	/* Code in host drivers/fwk assumes that "blocks" always is >=1 */
 	data.blocks = blocks ? blocks : 1;
 	data.flags = write ? MMC_DATA_WRITE : MMC_DATA_READ;
-	data.sg = &sg;
-	data.sg_len = 1;
 
-	sg_init_one(&sg, buf, data.blksz * data.blocks);
+	left_size = data.blksz * data.blocks;
+	nents = (left_size - 1) / seg_size + 1;
+	if (nents > 1) {
+		if (sg_alloc_table(&sgtable, nents, GFP_KERNEL))
+			return -ENOMEM;
+
+		data.sg = sgtable.sgl;
+		data.sg_len = nents;
+
+		for_each_sg(data.sg, sg_ptr, data.sg_len, i) {
+			sg_set_page(sg_ptr, virt_to_page(buf + (i * seg_size)),
+					min(seg_size, left_size),
+					offset_in_page(buf + (i * seg_size)));
+			left_size = left_size - seg_size;
+		}
+	} else {
+		data.sg = &sg;
+		data.sg_len = 1;
+
+		sg_init_one(&sg, buf, left_size);
+	}
 
 	mmc_set_data_timeout(&data, card);
 
 	mmc_wait_for_req(card->host, &mrq);
 
+	if (nents > 1)
+		sg_free_table(&sgtable);
+
 	if (cmd.error)
 		return cmd.error;
 	if (data.error)
diff --git a/drivers/mmc/core/slot-gpio.c b/drivers/mmc/core/slot-gpio.c
index 08c6b3d..16a1c0b 100644
--- a/drivers/mmc/core/slot-gpio.c
+++ b/drivers/mmc/core/slot-gpio.c
@@ -27,7 +27,13 @@
 static irqreturn_t mmc_gpio_cd_irqt(int irq, void *dev_id)
 {
 	/* Schedule a card detection after a debounce timeout */
-	mmc_detect_change(dev_id, msecs_to_jiffies(100));
+	struct mmc_host *host = dev_id;
+
+	if (host->ops->card_event)
+		host->ops->card_event(host);
+
+	mmc_detect_change(host, msecs_to_jiffies(200));
+
 	return IRQ_HANDLED;
 }
 
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 9bf10e7..bebbe16 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -81,6 +81,18 @@
 
 	  If unsure, say Y.
 
+config MMC_SDHCI_ACPI
+	tristate "SDHCI support for ACPI enumerated SDHCI controllers"
+	depends on MMC_SDHCI && ACPI
+	help
+	  This selects support for ACPI enumerated SDHCI controllers,
+	  identified by ACPI Compatibility ID PNP0D40 or specific
+	  ACPI Hardware IDs.
+
+	  If you have a controller with this interface, say Y or M here.
+
+	  If unsure, say N.
+
 config MMC_SDHCI_PLTFM
 	tristate "SDHCI platform and OF driver helper"
 	depends on MMC_SDHCI
@@ -270,26 +282,8 @@
 
 	  If unsure, say N.
 
-choice
-	prompt "Atmel SD/MMC Driver"
-	depends on AVR32 || ARCH_AT91
-	default MMC_ATMELMCI if AVR32
-	help
-	  Choose which driver to use for the Atmel MCI Silicon
-
-config MMC_AT91
-	tristate "AT91 SD/MMC Card Interface support (DEPRECATED)"
-	depends on ARCH_AT91
-	help
-	  This selects the AT91 MCI controller. This driver will
-	  be removed soon (for more information have a look to
-	  Documentation/feature-removal-schedule.txt). Please use
-	  MMC_ATMEL_MCI.
-
-	  If unsure, say N.
-
 config MMC_ATMELMCI
-	tristate "Atmel Multimedia Card Interface support"
+	tristate "Atmel SD/MMC Driver (Multimedia Card Interface)"
 	depends on AVR32 || ARCH_AT91
 	help
 	  This selects the Atmel Multimedia Card Interface driver. If
@@ -298,8 +292,6 @@
 
 	  If unsure, say N.
 
-endchoice
-
 config MMC_ATMELMCI_DMA
 	bool "Atmel MCI DMA support"
 	depends on MMC_ATMELMCI && (AVR32 || ARCH_AT91SAM9G45) && DMA_ENGINE
@@ -621,3 +613,14 @@
 
 	  Note: These controllers only support SDIO cards and do not
 	  support MMC or SD memory cards.
+
+config MMC_WMT
+	tristate "Wondermedia SD/MMC Host Controller support"
+	depends on ARCH_VT8500
+	default y
+	help
+	  This selects support for the SD/MMC Host Controller on
+	  Wondermedia WM8505/WM8650 based SoCs.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called wmt-sdmmc.
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index 17ad0a7..c5eddc1 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -9,6 +9,7 @@
 obj-$(CONFIG_MMC_SDHCI)		+= sdhci.o
 obj-$(CONFIG_MMC_SDHCI_PCI)	+= sdhci-pci.o
 obj-$(subst m,y,$(CONFIG_MMC_SDHCI_PCI))	+= sdhci-pci-data.o
+obj-$(CONFIG_MMC_SDHCI_ACPI)	+= sdhci-acpi.o
 obj-$(CONFIG_MMC_SDHCI_PXAV3)	+= sdhci-pxav3.o
 obj-$(CONFIG_MMC_SDHCI_PXAV2)	+= sdhci-pxav2.o
 obj-$(CONFIG_MMC_SDHCI_S3C)	+= sdhci-s3c.o
@@ -17,7 +18,6 @@
 obj-$(CONFIG_MMC_AU1X)		+= au1xmmc.o
 obj-$(CONFIG_MMC_OMAP)		+= omap.o
 obj-$(CONFIG_MMC_OMAP_HS)	+= omap_hsmmc.o
-obj-$(CONFIG_MMC_AT91)		+= at91_mci.o
 obj-$(CONFIG_MMC_ATMELMCI)	+= atmel-mci.o
 obj-$(CONFIG_MMC_TIFM_SD)	+= tifm_sd.o
 obj-$(CONFIG_MMC_MSM)		+= msm_sdcc.o
@@ -45,6 +45,7 @@
 obj-$(CONFIG_MMC_JZ4740)	+= jz4740_mmc.o
 obj-$(CONFIG_MMC_VUB300)	+= vub300.o
 obj-$(CONFIG_MMC_USHC)		+= ushc.o
+obj-$(CONFIG_MMC_WMT)		+= wmt-sdmmc.o
 
 obj-$(CONFIG_MMC_SDHCI_PLTFM)		+= sdhci-pltfm.o
 obj-$(CONFIG_MMC_SDHCI_CNS3XXX)		+= sdhci-cns3xxx.o
diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c
deleted file mode 100644
index 74bed0f..0000000
--- a/drivers/mmc/host/at91_mci.c
+++ /dev/null
@@ -1,1219 +0,0 @@
-/*
- *  linux/drivers/mmc/host/at91_mci.c - ATMEL AT91 MCI Driver
- *
- *  Copyright (C) 2005 Cougar Creek Computing Devices Ltd, All Rights Reserved
- *
- *  Copyright (C) 2006 Malcolm Noyes
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
-   This is the AT91 MCI driver that has been tested with both MMC cards
-   and SD-cards.  Boards that support write protect are now supported.
-   The CCAT91SBC001 board does not support SD cards.
-
-   The three entry points are at91_mci_request, at91_mci_set_ios
-   and at91_mci_get_ro.
-
-   SET IOS
-     This configures the device to put it into the correct mode and clock speed
-     required.
-
-   MCI REQUEST
-     MCI request processes the commands sent in the mmc_request structure. This
-     can consist of a processing command and a stop command in the case of
-     multiple block transfers.
-
-     There are three main types of request, commands, reads and writes.
-
-     Commands are straight forward. The command is submitted to the controller and
-     the request function returns. When the controller generates an interrupt to indicate
-     the command is finished, the response to the command are read and the mmc_request_done
-     function called to end the request.
-
-     Reads and writes work in a similar manner to normal commands but involve the PDC (DMA)
-     controller to manage the transfers.
-
-     A read is done from the controller directly to the scatterlist passed in from the request.
-     Due to a bug in the AT91RM9200 controller, when a read is completed, all the words are byte
-     swapped in the scatterlist buffers.  AT91SAM926x are not affected by this bug.
-
-     The sequence of read interrupts is: ENDRX, RXBUFF, CMDRDY
-
-     A write is slightly different in that the bytes to write are read from the scatterlist
-     into a dma memory buffer (this is in case the source buffer should be read only). The
-     entire write buffer is then done from this single dma memory buffer.
-
-     The sequence of write interrupts is: ENDTX, TXBUFE, NOTBUSY, CMDRDY
-
-   GET RO
-     Gets the status of the write protect pin, if available.
-*/
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/blkdev.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/dma-mapping.h>
-#include <linux/clk.h>
-#include <linux/atmel_pdc.h>
-#include <linux/gfp.h>
-#include <linux/highmem.h>
-
-#include <linux/mmc/host.h>
-#include <linux/mmc/sdio.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/gpio.h>
-
-#include <mach/board.h>
-#include <mach/cpu.h>
-
-#include "at91_mci.h"
-
-#define DRIVER_NAME "at91_mci"
-
-static inline int at91mci_is_mci1rev2xx(void)
-{
-	return (   cpu_is_at91sam9260()
-		|| cpu_is_at91sam9263()
-		|| cpu_is_at91sam9rl()
-		|| cpu_is_at91sam9g10()
-		|| cpu_is_at91sam9g20()
-		);
-}
-
-#define FL_SENT_COMMAND	(1 << 0)
-#define FL_SENT_STOP	(1 << 1)
-
-#define AT91_MCI_ERRORS	(AT91_MCI_RINDE | AT91_MCI_RDIRE | AT91_MCI_RCRCE	\
-		| AT91_MCI_RENDE | AT91_MCI_RTOE | AT91_MCI_DCRCE		\
-		| AT91_MCI_DTOE | AT91_MCI_OVRE | AT91_MCI_UNRE)
-
-#define at91_mci_read(host, reg)	__raw_readl((host)->baseaddr + (reg))
-#define at91_mci_write(host, reg, val)	__raw_writel((val), (host)->baseaddr + (reg))
-
-#define MCI_BLKSIZE 		512
-#define MCI_MAXBLKSIZE 		4095
-#define MCI_BLKATONCE 		256
-#define MCI_BUFSIZE 		(MCI_BLKSIZE * MCI_BLKATONCE)
-
-/*
- * Low level type for this driver
- */
-struct at91mci_host
-{
-	struct mmc_host *mmc;
-	struct mmc_command *cmd;
-	struct mmc_request *request;
-
-	void __iomem *baseaddr;
-	int irq;
-
-	struct at91_mmc_data *board;
-	int present;
-
-	struct clk *mci_clk;
-
-	/*
-	 * Flag indicating when the command has been sent. This is used to
-	 * work out whether or not to send the stop
-	 */
-	unsigned int flags;
-	/* flag for current bus settings */
-	u32 bus_mode;
-
-	/* DMA buffer used for transmitting */
-	unsigned int* buffer;
-	dma_addr_t physical_address;
-	unsigned int total_length;
-
-	/* Latest in the scatterlist that has been enabled for transfer, but not freed */
-	int in_use_index;
-
-	/* Latest in the scatterlist that has been enabled for transfer */
-	int transfer_index;
-
-	/* Timer for timeouts */
-	struct timer_list timer;
-};
-
-/*
- * Reset the controller and restore most of the state
- */
-static void at91_reset_host(struct at91mci_host *host)
-{
-	unsigned long flags;
-	u32 mr;
-	u32 sdcr;
-	u32 dtor;
-	u32 imr;
-
-	local_irq_save(flags);
-	imr = at91_mci_read(host, AT91_MCI_IMR);
-
-	at91_mci_write(host, AT91_MCI_IDR, 0xffffffff);
-
-	/* save current state */
-	mr = at91_mci_read(host, AT91_MCI_MR) & 0x7fff;
-	sdcr = at91_mci_read(host, AT91_MCI_SDCR);
-	dtor = at91_mci_read(host, AT91_MCI_DTOR);
-
-	/* reset the controller */
-	at91_mci_write(host, AT91_MCI_CR, AT91_MCI_MCIDIS | AT91_MCI_SWRST);
-
-	/* restore state */
-	at91_mci_write(host, AT91_MCI_CR, AT91_MCI_MCIEN);
-	at91_mci_write(host, AT91_MCI_MR, mr);
-	at91_mci_write(host, AT91_MCI_SDCR, sdcr);
-	at91_mci_write(host, AT91_MCI_DTOR, dtor);
-	at91_mci_write(host, AT91_MCI_IER, imr);
-
-	/* make sure sdio interrupts will fire */
-	at91_mci_read(host, AT91_MCI_SR);
-
-	local_irq_restore(flags);
-}
-
-static void at91_timeout_timer(unsigned long data)
-{
-	struct at91mci_host *host;
-
-	host = (struct at91mci_host *)data;
-
-	if (host->request) {
-		dev_err(host->mmc->parent, "Timeout waiting end of packet\n");
-
-		if (host->cmd && host->cmd->data) {
-			host->cmd->data->error = -ETIMEDOUT;
-		} else {
-			if (host->cmd)
-				host->cmd->error = -ETIMEDOUT;
-			else
-				host->request->cmd->error = -ETIMEDOUT;
-		}
-
-		at91_reset_host(host);
-		mmc_request_done(host->mmc, host->request);
-	}
-}
-
-/*
- * Copy from sg to a dma block - used for transfers
- */
-static inline void at91_mci_sg_to_dma(struct at91mci_host *host, struct mmc_data *data)
-{
-	unsigned int len, i, size;
-	unsigned *dmabuf = host->buffer;
-
-	size = data->blksz * data->blocks;
-	len = data->sg_len;
-
-	/* MCI1 rev2xx Data Write Operation and number of bytes erratum */
-	if (at91mci_is_mci1rev2xx())
-		if (host->total_length == 12)
-			memset(dmabuf, 0, 12);
-
-	/*
-	 * Just loop through all entries. Size might not
-	 * be the entire list though so make sure that
-	 * we do not transfer too much.
-	 */
-	for (i = 0; i < len; i++) {
-		struct scatterlist *sg;
-		int amount;
-		unsigned int *sgbuffer;
-
-		sg = &data->sg[i];
-
-		sgbuffer = kmap_atomic(sg_page(sg)) + sg->offset;
-		amount = min(size, sg->length);
-		size -= amount;
-
-		if (cpu_is_at91rm9200()) {	/* AT91RM9200 errata */
-			int index;
-
-			for (index = 0; index < (amount / 4); index++)
-				*dmabuf++ = swab32(sgbuffer[index]);
-		} else {
-			char *tmpv = (char *)dmabuf;
-			memcpy(tmpv, sgbuffer, amount);
-			tmpv += amount;
-			dmabuf = (unsigned *)tmpv;
-		}
-
-		kunmap_atomic(sgbuffer);
-
-		if (size == 0)
-			break;
-	}
-
-	/*
-	 * Check that we didn't get a request to transfer
-	 * more data than can fit into the SG list.
-	 */
-	BUG_ON(size != 0);
-}
-
-/*
- * Handle after a dma read
- */
-static void at91_mci_post_dma_read(struct at91mci_host *host)
-{
-	struct mmc_command *cmd;
-	struct mmc_data *data;
-	unsigned int len, i, size;
-	unsigned *dmabuf = host->buffer;
-
-	pr_debug("post dma read\n");
-
-	cmd = host->cmd;
-	if (!cmd) {
-		pr_debug("no command\n");
-		return;
-	}
-
-	data = cmd->data;
-	if (!data) {
-		pr_debug("no data\n");
-		return;
-	}
-
-	size = data->blksz * data->blocks;
-	len = data->sg_len;
-
-	at91_mci_write(host, AT91_MCI_IDR, AT91_MCI_ENDRX);
-	at91_mci_write(host, AT91_MCI_IER, AT91_MCI_RXBUFF);
-
-	for (i = 0; i < len; i++) {
-		struct scatterlist *sg;
-		int amount;
-		unsigned int *sgbuffer;
-
-		sg = &data->sg[i];
-
-		sgbuffer = kmap_atomic(sg_page(sg)) + sg->offset;
-		amount = min(size, sg->length);
-		size -= amount;
-
-		if (cpu_is_at91rm9200()) {	/* AT91RM9200 errata */
-			int index;
-			for (index = 0; index < (amount / 4); index++)
-				sgbuffer[index] = swab32(*dmabuf++);
-		} else {
-			char *tmpv = (char *)dmabuf;
-			memcpy(sgbuffer, tmpv, amount);
-			tmpv += amount;
-			dmabuf = (unsigned *)tmpv;
-		}
-
-		flush_kernel_dcache_page(sg_page(sg));
-		kunmap_atomic(sgbuffer);
-		data->bytes_xfered += amount;
-		if (size == 0)
-			break;
-	}
-
-	pr_debug("post dma read done\n");
-}
-
-/*
- * Handle transmitted data
- */
-static void at91_mci_handle_transmitted(struct at91mci_host *host)
-{
-	struct mmc_command *cmd;
-	struct mmc_data *data;
-
-	pr_debug("Handling the transmit\n");
-
-	/* Disable the transfer */
-	at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
-
-	/* Now wait for cmd ready */
-	at91_mci_write(host, AT91_MCI_IDR, AT91_MCI_TXBUFE);
-
-	cmd = host->cmd;
-	if (!cmd) return;
-
-	data = cmd->data;
-	if (!data) return;
-
-	if (cmd->data->blocks > 1) {
-		pr_debug("multiple write : wait for BLKE...\n");
-		at91_mci_write(host, AT91_MCI_IER, AT91_MCI_BLKE);
-	} else
-		at91_mci_write(host, AT91_MCI_IER, AT91_MCI_NOTBUSY);
-}
-
-/*
- * Update bytes transfered count during a write operation
- */
-static void at91_mci_update_bytes_xfered(struct at91mci_host *host)
-{
-	struct mmc_data *data;
-
-	/* always deal with the effective request (and not the current cmd) */
-
-	if (host->request->cmd && host->request->cmd->error != 0)
-		return;
-
-	if (host->request->data) {
-		data = host->request->data;
-		if (data->flags & MMC_DATA_WRITE) {
-			/* card is in IDLE mode now */
-			pr_debug("-> bytes_xfered %d, total_length = %d\n",
-				data->bytes_xfered, host->total_length);
-			data->bytes_xfered = data->blksz * data->blocks;
-		}
-	}
-}
-
-
-/*Handle after command sent ready*/
-static int at91_mci_handle_cmdrdy(struct at91mci_host *host)
-{
-	if (!host->cmd)
-		return 1;
-	else if (!host->cmd->data) {
-		if (host->flags & FL_SENT_STOP) {
-			/*After multi block write, we must wait for NOTBUSY*/
-			at91_mci_write(host, AT91_MCI_IER, AT91_MCI_NOTBUSY);
-		} else return 1;
-	} else if (host->cmd->data->flags & MMC_DATA_WRITE) {
-		/*After sendding multi-block-write command, start DMA transfer*/
-		at91_mci_write(host, AT91_MCI_IER, AT91_MCI_TXBUFE | AT91_MCI_BLKE);
-		at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_TXTEN);
-	}
-
-	/* command not completed, have to wait */
-	return 0;
-}
-
-
-/*
- * Enable the controller
- */
-static void at91_mci_enable(struct at91mci_host *host)
-{
-	unsigned int mr;
-
-	at91_mci_write(host, AT91_MCI_CR, AT91_MCI_MCIEN);
-	at91_mci_write(host, AT91_MCI_IDR, 0xffffffff);
-	at91_mci_write(host, AT91_MCI_DTOR, AT91_MCI_DTOMUL_1M | AT91_MCI_DTOCYC);
-	mr = AT91_MCI_PDCMODE | 0x34a;
-
-	if (at91mci_is_mci1rev2xx())
-		mr |= AT91_MCI_RDPROOF | AT91_MCI_WRPROOF;
-
-	at91_mci_write(host, AT91_MCI_MR, mr);
-
-	/* use Slot A or B (only one at same time) */
-	at91_mci_write(host, AT91_MCI_SDCR, host->board->slot_b);
-}
-
-/*
- * Disable the controller
- */
-static void at91_mci_disable(struct at91mci_host *host)
-{
-	at91_mci_write(host, AT91_MCI_CR, AT91_MCI_MCIDIS | AT91_MCI_SWRST);
-}
-
-/*
- * Send a command
- */
-static void at91_mci_send_command(struct at91mci_host *host, struct mmc_command *cmd)
-{
-	unsigned int cmdr, mr;
-	unsigned int block_length;
-	struct mmc_data *data = cmd->data;
-
-	unsigned int blocks;
-	unsigned int ier = 0;
-
-	host->cmd = cmd;
-
-	/* Needed for leaving busy state before CMD1 */
-	if ((at91_mci_read(host, AT91_MCI_SR) & AT91_MCI_RTOE) && (cmd->opcode == 1)) {
-		pr_debug("Clearing timeout\n");
-		at91_mci_write(host, AT91_MCI_ARGR, 0);
-		at91_mci_write(host, AT91_MCI_CMDR, AT91_MCI_OPDCMD);
-		while (!(at91_mci_read(host, AT91_MCI_SR) & AT91_MCI_CMDRDY)) {
-			/* spin */
-			pr_debug("Clearing: SR = %08X\n", at91_mci_read(host, AT91_MCI_SR));
-		}
-	}
-
-	cmdr = cmd->opcode;
-
-	if (mmc_resp_type(cmd) == MMC_RSP_NONE)
-		cmdr |= AT91_MCI_RSPTYP_NONE;
-	else {
-		/* if a response is expected then allow maximum response latancy */
-		cmdr |= AT91_MCI_MAXLAT;
-		/* set 136 bit response for R2, 48 bit response otherwise */
-		if (mmc_resp_type(cmd) == MMC_RSP_R2)
-			cmdr |= AT91_MCI_RSPTYP_136;
-		else
-			cmdr |= AT91_MCI_RSPTYP_48;
-	}
-
-	if (data) {
-
-		if (cpu_is_at91rm9200() || cpu_is_at91sam9261()) {
-			if (data->blksz & 0x3) {
-				pr_debug("Unsupported block size\n");
-				cmd->error = -EINVAL;
-				mmc_request_done(host->mmc, host->request);
-				return;
-			}
-			if (data->flags & MMC_DATA_STREAM) {
-				pr_debug("Stream commands not supported\n");
-				cmd->error = -EINVAL;
-				mmc_request_done(host->mmc, host->request);
-				return;
-			}
-		}
-
-		block_length = data->blksz;
-		blocks = data->blocks;
-
-		/* always set data start - also set direction flag for read */
-		if (data->flags & MMC_DATA_READ)
-			cmdr |= (AT91_MCI_TRDIR | AT91_MCI_TRCMD_START);
-		else if (data->flags & MMC_DATA_WRITE)
-			cmdr |= AT91_MCI_TRCMD_START;
-
-		if (cmd->opcode == SD_IO_RW_EXTENDED) {
-			cmdr |= AT91_MCI_TRTYP_SDIO_BLOCK;
-		} else {
-			if (data->flags & MMC_DATA_STREAM)
-				cmdr |= AT91_MCI_TRTYP_STREAM;
-			if (data->blocks > 1)
-				cmdr |= AT91_MCI_TRTYP_MULTIPLE;
-		}
-	}
-	else {
-		block_length = 0;
-		blocks = 0;
-	}
-
-	if (host->flags & FL_SENT_STOP)
-		cmdr |= AT91_MCI_TRCMD_STOP;
-
-	if (host->bus_mode == MMC_BUSMODE_OPENDRAIN)
-		cmdr |= AT91_MCI_OPDCMD;
-
-	/*
-	 * Set the arguments and send the command
-	 */
-	pr_debug("Sending command %d as %08X, arg = %08X, blocks = %d, length = %d (MR = %08X)\n",
-		cmd->opcode, cmdr, cmd->arg, blocks, block_length, at91_mci_read(host, AT91_MCI_MR));
-
-	if (!data) {
-		at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_TXTDIS | ATMEL_PDC_RXTDIS);
-		at91_mci_write(host, ATMEL_PDC_RPR, 0);
-		at91_mci_write(host, ATMEL_PDC_RCR, 0);
-		at91_mci_write(host, ATMEL_PDC_RNPR, 0);
-		at91_mci_write(host, ATMEL_PDC_RNCR, 0);
-		at91_mci_write(host, ATMEL_PDC_TPR, 0);
-		at91_mci_write(host, ATMEL_PDC_TCR, 0);
-		at91_mci_write(host, ATMEL_PDC_TNPR, 0);
-		at91_mci_write(host, ATMEL_PDC_TNCR, 0);
-		ier = AT91_MCI_CMDRDY;
-	} else {
-		/* zero block length and PDC mode */
-		mr = at91_mci_read(host, AT91_MCI_MR) & 0x5fff;
-		mr |= (data->blksz & 0x3) ? AT91_MCI_PDCFBYTE : 0;
-		mr |= (block_length << 16);
-		mr |= AT91_MCI_PDCMODE;
-		at91_mci_write(host, AT91_MCI_MR, mr);
-
-		if (!(cpu_is_at91rm9200() || cpu_is_at91sam9261()))
-			at91_mci_write(host, AT91_MCI_BLKR,
-				AT91_MCI_BLKR_BCNT(blocks) |
-				AT91_MCI_BLKR_BLKLEN(block_length));
-
-		/*
-		 * Disable the PDC controller
-		 */
-		at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
-
-		if (cmdr & AT91_MCI_TRCMD_START) {
-			data->bytes_xfered = 0;
-			host->transfer_index = 0;
-			host->in_use_index = 0;
-			if (cmdr & AT91_MCI_TRDIR) {
-				/*
-				 * Handle a read
-				 */
-				host->total_length = 0;
-
-				at91_mci_write(host, ATMEL_PDC_RPR, host->physical_address);
-				at91_mci_write(host, ATMEL_PDC_RCR, (data->blksz & 0x3) ?
-					(blocks * block_length) : (blocks * block_length) / 4);
-				at91_mci_write(host, ATMEL_PDC_RNPR, 0);
-				at91_mci_write(host, ATMEL_PDC_RNCR, 0);
-
-				ier = AT91_MCI_ENDRX /* | AT91_MCI_RXBUFF */;
-			}
-			else {
-				/*
-				 * Handle a write
-				 */
-				host->total_length = block_length * blocks;
-				/*
-				 * MCI1 rev2xx Data Write Operation and
-				 * number of bytes erratum
-				 */
-				if (at91mci_is_mci1rev2xx())
-					if (host->total_length < 12)
-						host->total_length = 12;
-
-				at91_mci_sg_to_dma(host, data);
-
-				pr_debug("Transmitting %d bytes\n", host->total_length);
-
-				at91_mci_write(host, ATMEL_PDC_TPR, host->physical_address);
-				at91_mci_write(host, ATMEL_PDC_TCR, (data->blksz & 0x3) ?
-						host->total_length : host->total_length / 4);
-
-				ier = AT91_MCI_CMDRDY;
-			}
-		}
-	}
-
-	/*
-	 * Send the command and then enable the PDC - not the other way round as
-	 * the data sheet says
-	 */
-
-	at91_mci_write(host, AT91_MCI_ARGR, cmd->arg);
-	at91_mci_write(host, AT91_MCI_CMDR, cmdr);
-
-	if (cmdr & AT91_MCI_TRCMD_START) {
-		if (cmdr & AT91_MCI_TRDIR)
-			at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTEN);
-	}
-
-	/* Enable selected interrupts */
-	at91_mci_write(host, AT91_MCI_IER, AT91_MCI_ERRORS | ier);
-}
-
-/*
- * Process the next step in the request
- */
-static void at91_mci_process_next(struct at91mci_host *host)
-{
-	if (!(host->flags & FL_SENT_COMMAND)) {
-		host->flags |= FL_SENT_COMMAND;
-		at91_mci_send_command(host, host->request->cmd);
-	}
-	else if ((!(host->flags & FL_SENT_STOP)) && host->request->stop) {
-		host->flags |= FL_SENT_STOP;
-		at91_mci_send_command(host, host->request->stop);
-	} else {
-		del_timer(&host->timer);
-		/* the at91rm9200 mci controller hangs after some transfers,
-		 * and the workaround is to reset it after each transfer.
-		 */
-		if (cpu_is_at91rm9200())
-			at91_reset_host(host);
-		mmc_request_done(host->mmc, host->request);
-	}
-}
-
-/*
- * Handle a command that has been completed
- */
-static void at91_mci_completed_command(struct at91mci_host *host, unsigned int status)
-{
-	struct mmc_command *cmd = host->cmd;
-	struct mmc_data *data = cmd->data;
-
-	at91_mci_write(host, AT91_MCI_IDR, 0xffffffff & ~(AT91_MCI_SDIOIRQA | AT91_MCI_SDIOIRQB));
-
-	cmd->resp[0] = at91_mci_read(host, AT91_MCI_RSPR(0));
-	cmd->resp[1] = at91_mci_read(host, AT91_MCI_RSPR(1));
-	cmd->resp[2] = at91_mci_read(host, AT91_MCI_RSPR(2));
-	cmd->resp[3] = at91_mci_read(host, AT91_MCI_RSPR(3));
-
-	pr_debug("Status = %08X/%08x [%08X %08X %08X %08X]\n",
-		 status, at91_mci_read(host, AT91_MCI_SR),
-		 cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3]);
-
-	if (status & AT91_MCI_ERRORS) {
-		if ((status & AT91_MCI_RCRCE) && !(mmc_resp_type(cmd) & MMC_RSP_CRC)) {
-			cmd->error = 0;
-		}
-		else {
-			if (status & (AT91_MCI_DTOE | AT91_MCI_DCRCE)) {
-				if (data) {
-					if (status & AT91_MCI_DTOE)
-						data->error = -ETIMEDOUT;
-					else if (status & AT91_MCI_DCRCE)
-						data->error = -EILSEQ;
-				}
-			} else {
-				if (status & AT91_MCI_RTOE)
-					cmd->error = -ETIMEDOUT;
-				else if (status & AT91_MCI_RCRCE)
-					cmd->error = -EILSEQ;
-				else
-					cmd->error = -EIO;
-			}
-
-			pr_debug("Error detected and set to %d/%d (cmd = %d, retries = %d)\n",
-				cmd->error, data ? data->error : 0,
-				 cmd->opcode, cmd->retries);
-		}
-	}
-	else
-		cmd->error = 0;
-
-	at91_mci_process_next(host);
-}
-
-/*
- * Handle an MMC request
- */
-static void at91_mci_request(struct mmc_host *mmc, struct mmc_request *mrq)
-{
-	struct at91mci_host *host = mmc_priv(mmc);
-	host->request = mrq;
-	host->flags = 0;
-
-	/* more than 1s timeout needed with slow SD cards */
-	mod_timer(&host->timer, jiffies +  msecs_to_jiffies(2000));
-
-	at91_mci_process_next(host);
-}
-
-/*
- * Set the IOS
- */
-static void at91_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
-{
-	int clkdiv;
-	struct at91mci_host *host = mmc_priv(mmc);
-	unsigned long at91_master_clock = clk_get_rate(host->mci_clk);
-
-	host->bus_mode = ios->bus_mode;
-
-	if (ios->clock == 0) {
-		/* Disable the MCI controller */
-		at91_mci_write(host, AT91_MCI_CR, AT91_MCI_MCIDIS);
-		clkdiv = 0;
-	}
-	else {
-		/* Enable the MCI controller */
-		at91_mci_write(host, AT91_MCI_CR, AT91_MCI_MCIEN);
-
-		if ((at91_master_clock % (ios->clock * 2)) == 0)
-			clkdiv = ((at91_master_clock / ios->clock) / 2) - 1;
-		else
-			clkdiv = (at91_master_clock / ios->clock) / 2;
-
-		pr_debug("clkdiv = %d. mcck = %ld\n", clkdiv,
-			at91_master_clock / (2 * (clkdiv + 1)));
-	}
-	if (ios->bus_width == MMC_BUS_WIDTH_4 && host->board->wire4) {
-		pr_debug("MMC: Setting controller bus width to 4\n");
-		at91_mci_write(host, AT91_MCI_SDCR, at91_mci_read(host, AT91_MCI_SDCR) | AT91_MCI_SDCBUS);
-	}
-	else {
-		pr_debug("MMC: Setting controller bus width to 1\n");
-		at91_mci_write(host, AT91_MCI_SDCR, at91_mci_read(host, AT91_MCI_SDCR) & ~AT91_MCI_SDCBUS);
-	}
-
-	/* Set the clock divider */
-	at91_mci_write(host, AT91_MCI_MR, (at91_mci_read(host, AT91_MCI_MR) & ~AT91_MCI_CLKDIV) | clkdiv);
-
-	/* maybe switch power to the card */
-	if (gpio_is_valid(host->board->vcc_pin)) {
-		switch (ios->power_mode) {
-			case MMC_POWER_OFF:
-				gpio_set_value(host->board->vcc_pin, 0);
-				break;
-			case MMC_POWER_UP:
-				gpio_set_value(host->board->vcc_pin, 1);
-				break;
-			case MMC_POWER_ON:
-				break;
-			default:
-				WARN_ON(1);
-		}
-	}
-}
-
-/*
- * Handle an interrupt
- */
-static irqreturn_t at91_mci_irq(int irq, void *devid)
-{
-	struct at91mci_host *host = devid;
-	int completed = 0;
-	unsigned int int_status, int_mask;
-
-	int_status = at91_mci_read(host, AT91_MCI_SR);
-	int_mask = at91_mci_read(host, AT91_MCI_IMR);
-
-	pr_debug("MCI irq: status = %08X, %08X, %08X\n", int_status, int_mask,
-		int_status & int_mask);
-
-	int_status = int_status & int_mask;
-
-	if (int_status & AT91_MCI_ERRORS) {
-		completed = 1;
-
-		if (int_status & AT91_MCI_UNRE)
-			pr_debug("MMC: Underrun error\n");
-		if (int_status & AT91_MCI_OVRE)
-			pr_debug("MMC: Overrun error\n");
-		if (int_status & AT91_MCI_DTOE)
-			pr_debug("MMC: Data timeout\n");
-		if (int_status & AT91_MCI_DCRCE)
-			pr_debug("MMC: CRC error in data\n");
-		if (int_status & AT91_MCI_RTOE)
-			pr_debug("MMC: Response timeout\n");
-		if (int_status & AT91_MCI_RENDE)
-			pr_debug("MMC: Response end bit error\n");
-		if (int_status & AT91_MCI_RCRCE)
-			pr_debug("MMC: Response CRC error\n");
-		if (int_status & AT91_MCI_RDIRE)
-			pr_debug("MMC: Response direction error\n");
-		if (int_status & AT91_MCI_RINDE)
-			pr_debug("MMC: Response index error\n");
-	} else {
-		/* Only continue processing if no errors */
-
-		if (int_status & AT91_MCI_TXBUFE) {
-			pr_debug("TX buffer empty\n");
-			at91_mci_handle_transmitted(host);
-		}
-
-		if (int_status & AT91_MCI_ENDRX) {
-			pr_debug("ENDRX\n");
-			at91_mci_post_dma_read(host);
-		}
-
-		if (int_status & AT91_MCI_RXBUFF) {
-			pr_debug("RX buffer full\n");
-			at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
-			at91_mci_write(host, AT91_MCI_IDR, AT91_MCI_RXBUFF | AT91_MCI_ENDRX);
-			completed = 1;
-		}
-
-		if (int_status & AT91_MCI_ENDTX)
-			pr_debug("Transmit has ended\n");
-
-		if (int_status & AT91_MCI_NOTBUSY) {
-			pr_debug("Card is ready\n");
-			at91_mci_update_bytes_xfered(host);
-			completed = 1;
-		}
-
-		if (int_status & AT91_MCI_DTIP)
-			pr_debug("Data transfer in progress\n");
-
-		if (int_status & AT91_MCI_BLKE) {
-			pr_debug("Block transfer has ended\n");
-			if (host->request->data && host->request->data->blocks > 1) {
-				/* multi block write : complete multi write
-				 * command and send stop */
-				completed = 1;
-			} else {
-				at91_mci_write(host, AT91_MCI_IER, AT91_MCI_NOTBUSY);
-			}
-		}
-
-		if (int_status & AT91_MCI_SDIOIRQA)
-			mmc_signal_sdio_irq(host->mmc);
-
-		if (int_status & AT91_MCI_SDIOIRQB)
-			mmc_signal_sdio_irq(host->mmc);
-
-		if (int_status & AT91_MCI_TXRDY)
-			pr_debug("Ready to transmit\n");
-
-		if (int_status & AT91_MCI_RXRDY)
-			pr_debug("Ready to receive\n");
-
-		if (int_status & AT91_MCI_CMDRDY) {
-			pr_debug("Command ready\n");
-			completed = at91_mci_handle_cmdrdy(host);
-		}
-	}
-
-	if (completed) {
-		pr_debug("Completed command\n");
-		at91_mci_write(host, AT91_MCI_IDR, 0xffffffff & ~(AT91_MCI_SDIOIRQA | AT91_MCI_SDIOIRQB));
-		at91_mci_completed_command(host, int_status);
-	} else
-		at91_mci_write(host, AT91_MCI_IDR, int_status & ~(AT91_MCI_SDIOIRQA | AT91_MCI_SDIOIRQB));
-
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t at91_mmc_det_irq(int irq, void *_host)
-{
-	struct at91mci_host *host = _host;
-	int present;
-
-	/* entering this ISR means that we have configured det_pin:
-	 * we can use its value in board structure */
-	present = !gpio_get_value(host->board->det_pin);
-
-	/*
-	 * we expect this irq on both insert and remove,
-	 * and use a short delay to debounce.
-	 */
-	if (present != host->present) {
-		host->present = present;
-		pr_debug("%s: card %s\n", mmc_hostname(host->mmc),
-			present ? "insert" : "remove");
-		if (!present) {
-			pr_debug("****** Resetting SD-card bus width ******\n");
-			at91_mci_write(host, AT91_MCI_SDCR, at91_mci_read(host, AT91_MCI_SDCR) & ~AT91_MCI_SDCBUS);
-		}
-		/* 0.5s needed because of early card detect switch firing */
-		mmc_detect_change(host->mmc, msecs_to_jiffies(500));
-	}
-	return IRQ_HANDLED;
-}
-
-static int at91_mci_get_ro(struct mmc_host *mmc)
-{
-	struct at91mci_host *host = mmc_priv(mmc);
-
-	if (gpio_is_valid(host->board->wp_pin))
-		return !!gpio_get_value(host->board->wp_pin);
-	/*
-	 * Board doesn't support read only detection; let the mmc core
-	 * decide what to do.
-	 */
-	return -ENOSYS;
-}
-
-static void at91_mci_enable_sdio_irq(struct mmc_host *mmc, int enable)
-{
-	struct at91mci_host *host = mmc_priv(mmc);
-
-	pr_debug("%s: sdio_irq %c : %s\n", mmc_hostname(host->mmc),
-		host->board->slot_b ? 'B':'A', enable ? "enable" : "disable");
-	at91_mci_write(host, enable ? AT91_MCI_IER : AT91_MCI_IDR,
-		host->board->slot_b ? AT91_MCI_SDIOIRQB : AT91_MCI_SDIOIRQA);
-
-}
-
-static const struct mmc_host_ops at91_mci_ops = {
-	.request	= at91_mci_request,
-	.set_ios	= at91_mci_set_ios,
-	.get_ro		= at91_mci_get_ro,
-	.enable_sdio_irq = at91_mci_enable_sdio_irq,
-};
-
-/*
- * Probe for the device
- */
-static int __init at91_mci_probe(struct platform_device *pdev)
-{
-	struct mmc_host *mmc;
-	struct at91mci_host *host;
-	struct resource *res;
-	int ret;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res)
-		return -ENXIO;
-
-	if (!request_mem_region(res->start, resource_size(res), DRIVER_NAME))
-		return -EBUSY;
-
-	mmc = mmc_alloc_host(sizeof(struct at91mci_host), &pdev->dev);
-	if (!mmc) {
-		ret = -ENOMEM;
-		dev_dbg(&pdev->dev, "couldn't allocate mmc host\n");
-		goto fail6;
-	}
-
-	mmc->ops = &at91_mci_ops;
-	mmc->f_min = 375000;
-	mmc->f_max = 25000000;
-	mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
-	mmc->caps = 0;
-
-	mmc->max_blk_size  = MCI_MAXBLKSIZE;
-	mmc->max_blk_count = MCI_BLKATONCE;
-	mmc->max_req_size  = MCI_BUFSIZE;
-	mmc->max_segs      = MCI_BLKATONCE;
-	mmc->max_seg_size  = MCI_BUFSIZE;
-
-	host = mmc_priv(mmc);
-	host->mmc = mmc;
-	host->bus_mode = 0;
-	host->board = pdev->dev.platform_data;
-	if (host->board->wire4) {
-		if (at91mci_is_mci1rev2xx())
-			mmc->caps |= MMC_CAP_4_BIT_DATA;
-		else
-			dev_warn(&pdev->dev, "4 wire bus mode not supported"
-				" - using 1 wire\n");
-	}
-
-	host->buffer = dma_alloc_coherent(&pdev->dev, MCI_BUFSIZE,
-					&host->physical_address, GFP_KERNEL);
-	if (!host->buffer) {
-		ret = -ENOMEM;
-		dev_err(&pdev->dev, "Can't allocate transmit buffer\n");
-		goto fail5;
-	}
-
-	/* Add SDIO capability when available */
-	if (at91mci_is_mci1rev2xx()) {
-		/* at91mci MCI1 rev2xx sdio interrupt erratum */
-		if (host->board->wire4 || !host->board->slot_b)
-			mmc->caps |= MMC_CAP_SDIO_IRQ;
-	}
-
-	/*
-	 * Reserve GPIOs ... board init code makes sure these pins are set
-	 * up as GPIOs with the right direction (input, except for vcc)
-	 */
-	if (gpio_is_valid(host->board->det_pin)) {
-		ret = gpio_request(host->board->det_pin, "mmc_detect");
-		if (ret < 0) {
-			dev_dbg(&pdev->dev, "couldn't claim card detect pin\n");
-			goto fail4b;
-		}
-	}
-	if (gpio_is_valid(host->board->wp_pin)) {
-		ret = gpio_request(host->board->wp_pin, "mmc_wp");
-		if (ret < 0) {
-			dev_dbg(&pdev->dev, "couldn't claim wp sense pin\n");
-			goto fail4;
-		}
-	}
-	if (gpio_is_valid(host->board->vcc_pin)) {
-		ret = gpio_request(host->board->vcc_pin, "mmc_vcc");
-		if (ret < 0) {
-			dev_dbg(&pdev->dev, "couldn't claim vcc switch pin\n");
-			goto fail3;
-		}
-	}
-
-	/*
-	 * Get Clock
-	 */
-	host->mci_clk = clk_get(&pdev->dev, "mci_clk");
-	if (IS_ERR(host->mci_clk)) {
-		ret = -ENODEV;
-		dev_dbg(&pdev->dev, "no mci_clk?\n");
-		goto fail2;
-	}
-
-	/*
-	 * Map I/O region
-	 */
-	host->baseaddr = ioremap(res->start, resource_size(res));
-	if (!host->baseaddr) {
-		ret = -ENOMEM;
-		goto fail1;
-	}
-
-	/*
-	 * Reset hardware
-	 */
-	clk_enable(host->mci_clk);		/* Enable the peripheral clock */
-	at91_mci_disable(host);
-	at91_mci_enable(host);
-
-	/*
-	 * Allocate the MCI interrupt
-	 */
-	host->irq = platform_get_irq(pdev, 0);
-	ret = request_irq(host->irq, at91_mci_irq, IRQF_SHARED,
-			mmc_hostname(mmc), host);
-	if (ret) {
-		dev_dbg(&pdev->dev, "request MCI interrupt failed\n");
-		goto fail0;
-	}
-
-	setup_timer(&host->timer, at91_timeout_timer, (unsigned long)host);
-
-	platform_set_drvdata(pdev, mmc);
-
-	/*
-	 * Add host to MMC layer
-	 */
-	if (gpio_is_valid(host->board->det_pin)) {
-		host->present = !gpio_get_value(host->board->det_pin);
-	}
-	else
-		host->present = -1;
-
-	mmc_add_host(mmc);
-
-	/*
-	 * monitor card insertion/removal if we can
-	 */
-	if (gpio_is_valid(host->board->det_pin)) {
-		ret = request_irq(gpio_to_irq(host->board->det_pin),
-				at91_mmc_det_irq, 0, mmc_hostname(mmc), host);
-		if (ret)
-			dev_warn(&pdev->dev, "request MMC detect irq failed\n");
-		else
-			device_init_wakeup(&pdev->dev, 1);
-	}
-
-	pr_debug("Added MCI driver\n");
-
-	return 0;
-
-fail0:
-	clk_disable(host->mci_clk);
-	iounmap(host->baseaddr);
-fail1:
-	clk_put(host->mci_clk);
-fail2:
-	if (gpio_is_valid(host->board->vcc_pin))
-		gpio_free(host->board->vcc_pin);
-fail3:
-	if (gpio_is_valid(host->board->wp_pin))
-		gpio_free(host->board->wp_pin);
-fail4:
-	if (gpio_is_valid(host->board->det_pin))
-		gpio_free(host->board->det_pin);
-fail4b:
-	if (host->buffer)
-		dma_free_coherent(&pdev->dev, MCI_BUFSIZE,
-				host->buffer, host->physical_address);
-fail5:
-	mmc_free_host(mmc);
-fail6:
-	release_mem_region(res->start, resource_size(res));
-	dev_err(&pdev->dev, "probe failed, err %d\n", ret);
-	return ret;
-}
-
-/*
- * Remove a device
- */
-static int __exit at91_mci_remove(struct platform_device *pdev)
-{
-	struct mmc_host *mmc = platform_get_drvdata(pdev);
-	struct at91mci_host *host;
-	struct resource *res;
-
-	if (!mmc)
-		return -1;
-
-	host = mmc_priv(mmc);
-
-	if (host->buffer)
-		dma_free_coherent(&pdev->dev, MCI_BUFSIZE,
-				host->buffer, host->physical_address);
-
-	if (gpio_is_valid(host->board->det_pin)) {
-		if (device_can_wakeup(&pdev->dev))
-			free_irq(gpio_to_irq(host->board->det_pin), host);
-		device_init_wakeup(&pdev->dev, 0);
-		gpio_free(host->board->det_pin);
-	}
-
-	at91_mci_disable(host);
-	del_timer_sync(&host->timer);
-	mmc_remove_host(mmc);
-	free_irq(host->irq, host);
-
-	clk_disable(host->mci_clk);			/* Disable the peripheral clock */
-	clk_put(host->mci_clk);
-
-	if (gpio_is_valid(host->board->vcc_pin))
-		gpio_free(host->board->vcc_pin);
-	if (gpio_is_valid(host->board->wp_pin))
-		gpio_free(host->board->wp_pin);
-
-	iounmap(host->baseaddr);
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(res->start, resource_size(res));
-
-	mmc_free_host(mmc);
-	platform_set_drvdata(pdev, NULL);
-	pr_debug("MCI Removed\n");
-
-	return 0;
-}
-
-#ifdef CONFIG_PM
-static int at91_mci_suspend(struct platform_device *pdev, pm_message_t state)
-{
-	struct mmc_host *mmc = platform_get_drvdata(pdev);
-	struct at91mci_host *host = mmc_priv(mmc);
-	int ret = 0;
-
-	if (gpio_is_valid(host->board->det_pin) && device_may_wakeup(&pdev->dev))
-		enable_irq_wake(host->board->det_pin);
-
-	if (mmc)
-		ret = mmc_suspend_host(mmc);
-
-	return ret;
-}
-
-static int at91_mci_resume(struct platform_device *pdev)
-{
-	struct mmc_host *mmc = platform_get_drvdata(pdev);
-	struct at91mci_host *host = mmc_priv(mmc);
-	int ret = 0;
-
-	if (gpio_is_valid(host->board->det_pin) && device_may_wakeup(&pdev->dev))
-		disable_irq_wake(host->board->det_pin);
-
-	if (mmc)
-		ret = mmc_resume_host(mmc);
-
-	return ret;
-}
-#else
-#define at91_mci_suspend	NULL
-#define at91_mci_resume		NULL
-#endif
-
-static struct platform_driver at91_mci_driver = {
-	.remove		= __exit_p(at91_mci_remove),
-	.suspend	= at91_mci_suspend,
-	.resume		= at91_mci_resume,
-	.driver		= {
-		.name	= DRIVER_NAME,
-		.owner	= THIS_MODULE,
-	},
-};
-
-static int __init at91_mci_init(void)
-{
-	return platform_driver_probe(&at91_mci_driver, at91_mci_probe);
-}
-
-static void __exit at91_mci_exit(void)
-{
-	platform_driver_unregister(&at91_mci_driver);
-}
-
-module_init(at91_mci_init);
-module_exit(at91_mci_exit);
-
-MODULE_DESCRIPTION("AT91 Multimedia Card Interface driver");
-MODULE_AUTHOR("Nick Randell");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:at91_mci");
diff --git a/drivers/mmc/host/at91_mci.h b/drivers/mmc/host/at91_mci.h
deleted file mode 100644
index eec3a6b..0000000
--- a/drivers/mmc/host/at91_mci.h
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * drivers/mmc/host/at91_mci.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * MultiMedia Card Interface (MCI) registers.
- * Based on AT91RM9200 datasheet revision F.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_MCI_H
-#define AT91_MCI_H
-
-#define AT91_MCI_CR		0x00		/* Control Register */
-#define		AT91_MCI_MCIEN		(1 <<  0)	/* Multi-Media Interface Enable */
-#define		AT91_MCI_MCIDIS		(1 <<  1)	/* Multi-Media Interface Disable */
-#define		AT91_MCI_PWSEN		(1 <<  2)	/* Power Save Mode Enable */
-#define		AT91_MCI_PWSDIS		(1 <<  3)	/* Power Save Mode Disable */
-#define		AT91_MCI_SWRST		(1 <<  7)	/* Software Reset */
-
-#define AT91_MCI_MR		0x04		/* Mode Register */
-#define		AT91_MCI_CLKDIV		(0xff  <<  0)	/* Clock Divider */
-#define		AT91_MCI_PWSDIV		(7     <<  8)	/* Power Saving Divider */
-#define		AT91_MCI_RDPROOF	(1     << 11)	/* Read Proof Enable [SAM926[03] only] */
-#define		AT91_MCI_WRPROOF	(1     << 12)	/* Write Proof Enable [SAM926[03] only] */
-#define		AT91_MCI_PDCFBYTE	(1     << 13)	/* PDC Force Byte Transfer [SAM926[03] only] */
-#define		AT91_MCI_PDCPADV	(1     << 14)	/* PDC Padding Value */
-#define		AT91_MCI_PDCMODE	(1     << 15)	/* PDC-orientated Mode */
-#define		AT91_MCI_BLKLEN		(0xfff << 18)	/* Data Block Length */
-
-#define AT91_MCI_DTOR		0x08		/* Data Timeout Register */
-#define		AT91_MCI_DTOCYC		(0xf << 0)	/* Data Timeout Cycle Number */
-#define		AT91_MCI_DTOMUL		(7   << 4)	/* Data Timeout Multiplier */
-#define		AT91_MCI_DTOMUL_1		(0 <<  4)
-#define		AT91_MCI_DTOMUL_16		(1 <<  4)
-#define		AT91_MCI_DTOMUL_128		(2 <<  4)
-#define		AT91_MCI_DTOMUL_256		(3 <<  4)
-#define		AT91_MCI_DTOMUL_1K		(4 <<  4)
-#define		AT91_MCI_DTOMUL_4K		(5 <<  4)
-#define		AT91_MCI_DTOMUL_64K		(6 <<  4)
-#define		AT91_MCI_DTOMUL_1M		(7 <<  4)
-
-#define AT91_MCI_SDCR		0x0c		/* SD Card Register */
-#define		AT91_MCI_SDCSEL		(3 << 0)	/* SD Card Selector */
-#define		AT91_MCI_SDCBUS		(1 << 7)	/* 1-bit or 4-bit bus */
-
-#define AT91_MCI_ARGR		0x10		/* Argument Register */
-
-#define AT91_MCI_CMDR		0x14		/* Command Register */
-#define		AT91_MCI_CMDNB		(0x3f << 0)	/* Command Number */
-#define		AT91_MCI_RSPTYP		(3    << 6)	/* Response Type */
-#define			AT91_MCI_RSPTYP_NONE	(0 <<  6)
-#define			AT91_MCI_RSPTYP_48	(1 <<  6)
-#define			AT91_MCI_RSPTYP_136	(2 <<  6)
-#define		AT91_MCI_SPCMD		(7    << 8)	/* Special Command */
-#define			AT91_MCI_SPCMD_NONE	(0 <<  8)
-#define			AT91_MCI_SPCMD_INIT	(1 <<  8)
-#define			AT91_MCI_SPCMD_SYNC	(2 <<  8)
-#define			AT91_MCI_SPCMD_ICMD	(4 <<  8)
-#define			AT91_MCI_SPCMD_IRESP	(5 <<  8)
-#define		AT91_MCI_OPDCMD		(1 << 11)	/* Open Drain Command */
-#define		AT91_MCI_MAXLAT		(1 << 12)	/* Max Latency for Command to Response */
-#define		AT91_MCI_TRCMD		(3 << 16)	/* Transfer Command */
-#define			AT91_MCI_TRCMD_NONE	(0 << 16)
-#define			AT91_MCI_TRCMD_START	(1 << 16)
-#define			AT91_MCI_TRCMD_STOP	(2 << 16)
-#define		AT91_MCI_TRDIR		(1 << 18)	/* Transfer Direction */
-#define		AT91_MCI_TRTYP		(3 << 19)	/* Transfer Type */
-#define			AT91_MCI_TRTYP_BLOCK	(0 << 19)
-#define			AT91_MCI_TRTYP_MULTIPLE	(1 << 19)
-#define			AT91_MCI_TRTYP_STREAM	(2 << 19)
-#define			AT91_MCI_TRTYP_SDIO_BYTE	(4 << 19)
-#define			AT91_MCI_TRTYP_SDIO_BLOCK	(5 << 19)
-
-#define AT91_MCI_BLKR		0x18		/* Block Register */
-#define		AT91_MCI_BLKR_BCNT(n)	((0xffff & (n)) << 0)	/* Block count */
-#define		AT91_MCI_BLKR_BLKLEN(n)	((0xffff & (n)) << 16)	/* Block length */
-
-#define AT91_MCI_RSPR(n)	(0x20 + ((n) * 4))	/* Response Registers 0-3 */
-#define AT91_MCR_RDR		0x30		/* Receive Data Register */
-#define AT91_MCR_TDR		0x34		/* Transmit Data Register */
-
-#define AT91_MCI_SR		0x40		/* Status Register */
-#define		AT91_MCI_CMDRDY		(1 <<  0)	/* Command Ready */
-#define		AT91_MCI_RXRDY		(1 <<  1)	/* Receiver Ready */
-#define		AT91_MCI_TXRDY		(1 <<  2)	/* Transmit Ready */
-#define		AT91_MCI_BLKE		(1 <<  3)	/* Data Block Ended */
-#define		AT91_MCI_DTIP		(1 <<  4)	/* Data Transfer in Progress */
-#define		AT91_MCI_NOTBUSY	(1 <<  5)	/* Data Not Busy */
-#define		AT91_MCI_ENDRX		(1 <<  6)	/* End of RX Buffer */
-#define		AT91_MCI_ENDTX		(1 <<  7)	/* End fo TX Buffer */
-#define		AT91_MCI_SDIOIRQA	(1 <<  8)	/* SDIO Interrupt for Slot A */
-#define		AT91_MCI_SDIOIRQB	(1 <<  9)	/* SDIO Interrupt for Slot B */
-#define		AT91_MCI_RXBUFF		(1 << 14)	/* RX Buffer Full */
-#define		AT91_MCI_TXBUFE		(1 << 15)	/* TX Buffer Empty */
-#define		AT91_MCI_RINDE		(1 << 16)	/* Response Index Error */
-#define		AT91_MCI_RDIRE		(1 << 17)	/* Response Direction Error */
-#define		AT91_MCI_RCRCE		(1 << 18)	/* Response CRC Error */
-#define		AT91_MCI_RENDE		(1 << 19)	/* Response End Bit Error */
-#define		AT91_MCI_RTOE		(1 << 20)	/* Response Time-out Error */
-#define		AT91_MCI_DCRCE		(1 << 21)	/* Data CRC Error */
-#define		AT91_MCI_DTOE		(1 << 22)	/* Data Time-out Error */
-#define		AT91_MCI_OVRE		(1 << 30)	/* Overrun */
-#define		AT91_MCI_UNRE		(1 << 31)	/* Underrun */
-
-#define AT91_MCI_IER		0x44		/* Interrupt Enable Register */
-#define AT91_MCI_IDR		0x48		/* Interrupt Disable Register */
-#define AT91_MCI_IMR		0x4c		/* Interrupt Mask Register */
-
-#endif
diff --git a/drivers/mmc/host/dw_mmc-pci.c b/drivers/mmc/host/dw_mmc-pci.c
index 083fcd2..8ee0f74 100644
--- a/drivers/mmc/host/dw_mmc-pci.c
+++ b/drivers/mmc/host/dw_mmc-pci.c
@@ -134,7 +134,7 @@
 	.name		= "dw_mmc_pci",
 	.id_table	= dw_mci_pci_id,
 	.probe		= dw_mci_pci_probe,
-	.remove		= dw_mci_pci_remove,
+	.remove		= __devexit_p(dw_mci_pci_remove),
 	.driver		=	{
 		.pm =   &dw_mci_pci_pmops
 	},
diff --git a/drivers/mmc/host/dw_mmc-pltfm.c b/drivers/mmc/host/dw_mmc-pltfm.c
index 8fd6d2c..222036c 100644
--- a/drivers/mmc/host/dw_mmc-pltfm.c
+++ b/drivers/mmc/host/dw_mmc-pltfm.c
@@ -119,7 +119,8 @@
 MODULE_DEVICE_TABLE(of, dw_mci_pltfm_match);
 
 static struct platform_driver dw_mci_pltfm_driver = {
-	.remove		= __exit_p(dw_mci_pltfm_remove),
+	.probe		= dw_mci_pltfm_probe,
+	.remove		= __devexit_p(dw_mci_pltfm_remove),
 	.driver		= {
 		.name		= "dw_mmc",
 		.of_match_table	= of_match_ptr(dw_mci_pltfm_match),
@@ -127,18 +128,7 @@
 	},
 };
 
-static int __init dw_mci_init(void)
-{
-	return platform_driver_probe(&dw_mci_pltfm_driver, dw_mci_pltfm_probe);
-}
-
-static void __exit dw_mci_exit(void)
-{
-	platform_driver_unregister(&dw_mci_pltfm_driver);
-}
-
-module_init(dw_mci_init);
-module_exit(dw_mci_exit);
+module_platform_driver(dw_mci_pltfm_driver);
 
 MODULE_DESCRIPTION("DW Multimedia Card Interface driver");
 MODULE_AUTHOR("NXP Semiconductor VietNam");
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index c0667c8..323c502 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -232,7 +232,7 @@
 {
 	struct mmc_data	*data;
 	struct dw_mci_slot *slot = mmc_priv(mmc);
-	struct dw_mci_drv_data *drv_data = slot->host->drv_data;
+	const struct dw_mci_drv_data *drv_data = slot->host->drv_data;
 	u32 cmdr;
 	cmd->error = -EINPROGRESS;
 
@@ -617,13 +617,13 @@
 		cmd, arg, cmd_status);
 }
 
-static void dw_mci_setup_bus(struct dw_mci_slot *slot)
+static void dw_mci_setup_bus(struct dw_mci_slot *slot, bool force_clkinit)
 {
 	struct dw_mci *host = slot->host;
 	u32 div;
 	u32 clk_en_a;
 
-	if (slot->clock != host->current_speed) {
+	if (slot->clock != host->current_speed || force_clkinit) {
 		div = host->bus_hz / slot->clock;
 		if (host->bus_hz % slot->clock && host->bus_hz > slot->clock)
 			/*
@@ -683,9 +683,6 @@
 	if (host->pdata->select_slot)
 		host->pdata->select_slot(slot->id);
 
-	/* Slot specific timing and width adjustment */
-	dw_mci_setup_bus(slot);
-
 	host->cur_slot = slot;
 	host->mrq = mrq;
 
@@ -773,22 +770,19 @@
 static void dw_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 {
 	struct dw_mci_slot *slot = mmc_priv(mmc);
-	struct dw_mci_drv_data *drv_data = slot->host->drv_data;
+	const struct dw_mci_drv_data *drv_data = slot->host->drv_data;
 	u32 regs;
 
-	/* set default 1 bit mode */
-	slot->ctype = SDMMC_CTYPE_1BIT;
-
 	switch (ios->bus_width) {
-	case MMC_BUS_WIDTH_1:
-		slot->ctype = SDMMC_CTYPE_1BIT;
-		break;
 	case MMC_BUS_WIDTH_4:
 		slot->ctype = SDMMC_CTYPE_4BIT;
 		break;
 	case MMC_BUS_WIDTH_8:
 		slot->ctype = SDMMC_CTYPE_8BIT;
 		break;
+	default:
+		/* set default 1 bit mode */
+		slot->ctype = SDMMC_CTYPE_1BIT;
 	}
 
 	regs = mci_readl(slot->host, UHS_REG);
@@ -812,6 +806,9 @@
 	if (drv_data && drv_data->set_ios)
 		drv_data->set_ios(slot->host, ios);
 
+	/* Slot specific timing and width adjustment */
+	dw_mci_setup_bus(slot, false);
+
 	switch (ios->power_mode) {
 	case MMC_POWER_UP:
 		set_bit(DW_MMC_CARD_NEED_INIT, &slot->flags);
@@ -1817,7 +1814,7 @@
 {
 	struct mmc_host *mmc;
 	struct dw_mci_slot *slot;
-	struct dw_mci_drv_data *drv_data = host->drv_data;
+	const struct dw_mci_drv_data *drv_data = host->drv_data;
 	int ctrl_id, ret;
 	u8 bus_width;
 
@@ -1850,6 +1847,9 @@
 	if (host->pdata->caps)
 		mmc->caps = host->pdata->caps;
 
+	if (host->pdata->pm_caps)
+		mmc->pm_caps = host->pdata->pm_caps;
+
 	if (host->dev->of_node) {
 		ctrl_id = of_alias_get_id(host->dev->of_node, "mshc");
 		if (ctrl_id < 0)
@@ -1911,7 +1911,7 @@
 #endif /* CONFIG_MMC_DW_IDMAC */
 	}
 
-	host->vmmc = regulator_get(mmc_dev(mmc), "vmmc");
+	host->vmmc = devm_regulator_get(mmc_dev(mmc), "vmmc");
 	if (IS_ERR(host->vmmc)) {
 		pr_info("%s: no vmmc regulator found\n", mmc_hostname(mmc));
 		host->vmmc = NULL;
@@ -1960,7 +1960,7 @@
 static void dw_mci_init_dma(struct dw_mci *host)
 {
 	/* Alloc memory for sg translation */
-	host->sg_cpu = dma_alloc_coherent(host->dev, PAGE_SIZE,
+	host->sg_cpu = dmam_alloc_coherent(host->dev, PAGE_SIZE,
 					  &host->sg_dma, GFP_KERNEL);
 	if (!host->sg_cpu) {
 		dev_err(host->dev, "%s: could not alloc DMA memory\n",
@@ -2038,7 +2038,7 @@
 	struct dw_mci_board *pdata;
 	struct device *dev = host->dev;
 	struct device_node *np = dev->of_node;
-	struct dw_mci_drv_data *drv_data = host->drv_data;
+	const struct dw_mci_drv_data *drv_data = host->drv_data;
 	int idx, ret;
 
 	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
@@ -2072,6 +2072,12 @@
 			return ERR_PTR(ret);
 	}
 
+	if (of_find_property(np, "keep-power-in-suspend", NULL))
+		pdata->pm_caps |= MMC_PM_KEEP_POWER;
+
+	if (of_find_property(np, "enable-sdio-wakeup", NULL))
+		pdata->pm_caps |= MMC_PM_WAKE_SDIO_IRQ;
+
 	return pdata;
 }
 
@@ -2084,7 +2090,7 @@
 
 int dw_mci_probe(struct dw_mci *host)
 {
-	struct dw_mci_drv_data *drv_data = host->drv_data;
+	const struct dw_mci_drv_data *drv_data = host->drv_data;
 	int width, i, ret = 0;
 	u32 fifo_size;
 	int init_slots = 0;
@@ -2103,26 +2109,24 @@
 		return -ENODEV;
 	}
 
-	host->biu_clk = clk_get(host->dev, "biu");
+	host->biu_clk = devm_clk_get(host->dev, "biu");
 	if (IS_ERR(host->biu_clk)) {
 		dev_dbg(host->dev, "biu clock not available\n");
 	} else {
 		ret = clk_prepare_enable(host->biu_clk);
 		if (ret) {
 			dev_err(host->dev, "failed to enable biu clock\n");
-			clk_put(host->biu_clk);
 			return ret;
 		}
 	}
 
-	host->ciu_clk = clk_get(host->dev, "ciu");
+	host->ciu_clk = devm_clk_get(host->dev, "ciu");
 	if (IS_ERR(host->ciu_clk)) {
 		dev_dbg(host->dev, "ciu clock not available\n");
 	} else {
 		ret = clk_prepare_enable(host->ciu_clk);
 		if (ret) {
 			dev_err(host->dev, "failed to enable ciu clock\n");
-			clk_put(host->ciu_clk);
 			goto err_clk_biu;
 		}
 	}
@@ -2224,7 +2228,8 @@
 	if (!host->card_workqueue)
 		goto err_dmaunmap;
 	INIT_WORK(&host->card_work, dw_mci_work_routine_card);
-	ret = request_irq(host->irq, dw_mci_interrupt, host->irq_flags, "dw-mci", host);
+	ret = devm_request_irq(host->dev, host->irq, dw_mci_interrupt,
+			       host->irq_flags, "dw-mci", host);
 	if (ret)
 		goto err_workqueue;
 
@@ -2262,7 +2267,7 @@
 	} else {
 		dev_dbg(host->dev, "attempted to initialize %d slots, "
 					"but failed on all\n", host->num_slots);
-		goto err_init_slot;
+		goto err_workqueue;
 	}
 
 	/*
@@ -2282,33 +2287,24 @@
 
 	return 0;
 
-err_init_slot:
-	free_irq(host->irq, host);
-
 err_workqueue:
 	destroy_workqueue(host->card_workqueue);
 
 err_dmaunmap:
 	if (host->use_dma && host->dma_ops->exit)
 		host->dma_ops->exit(host);
-	dma_free_coherent(host->dev, PAGE_SIZE,
-			  host->sg_cpu, host->sg_dma);
 
-	if (host->vmmc) {
+	if (host->vmmc)
 		regulator_disable(host->vmmc);
-		regulator_put(host->vmmc);
-	}
 
 err_clk_ciu:
-	if (!IS_ERR(host->ciu_clk)) {
+	if (!IS_ERR(host->ciu_clk))
 		clk_disable_unprepare(host->ciu_clk);
-		clk_put(host->ciu_clk);
-	}
+
 err_clk_biu:
-	if (!IS_ERR(host->biu_clk)) {
+	if (!IS_ERR(host->biu_clk))
 		clk_disable_unprepare(host->biu_clk);
-		clk_put(host->biu_clk);
-	}
+
 	return ret;
 }
 EXPORT_SYMBOL(dw_mci_probe);
@@ -2330,24 +2326,19 @@
 	mci_writel(host, CLKENA, 0);
 	mci_writel(host, CLKSRC, 0);
 
-	free_irq(host->irq, host);
 	destroy_workqueue(host->card_workqueue);
-	dma_free_coherent(host->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma);
 
 	if (host->use_dma && host->dma_ops->exit)
 		host->dma_ops->exit(host);
 
-	if (host->vmmc) {
+	if (host->vmmc)
 		regulator_disable(host->vmmc);
-		regulator_put(host->vmmc);
-	}
 
 	if (!IS_ERR(host->ciu_clk))
 		clk_disable_unprepare(host->ciu_clk);
+
 	if (!IS_ERR(host->biu_clk))
 		clk_disable_unprepare(host->biu_clk);
-	clk_put(host->ciu_clk);
-	clk_put(host->biu_clk);
 }
 EXPORT_SYMBOL(dw_mci_remove);
 
@@ -2411,6 +2402,11 @@
 		struct dw_mci_slot *slot = host->slot[i];
 		if (!slot)
 			continue;
+		if (slot->mmc->pm_flags & MMC_PM_KEEP_POWER) {
+			dw_mci_set_ios(slot->mmc, &slot->mmc->ios);
+			dw_mci_setup_bus(slot, true);
+		}
+
 		ret = mmc_resume_host(host->slot[i]->mmc);
 		if (ret < 0)
 			return ret;
diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
index 6290b7f..29e680f 100644
--- a/drivers/mmc/host/mxcmmc.c
+++ b/drivers/mmc/host/mxcmmc.c
@@ -240,7 +240,7 @@
 		return 0;
 
 	for_each_sg(data->sg, sg, data->sg_len, i) {
-		if (sg->offset & 3 || sg->length & 3) {
+		if (sg->offset & 3 || sg->length & 3 || sg->length < 512) {
 			host->do_dma = 0;
 			return 0;
 		}
diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c
index 80d1e6d..206fe49 100644
--- a/drivers/mmc/host/mxs-mmc.c
+++ b/drivers/mmc/host/mxs-mmc.c
@@ -43,7 +43,6 @@
 #include <linux/module.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/stmp_device.h>
-#include <linux/mmc/mxs-mmc.h>
 #include <linux/spi/mxs-spi.h>
 
 #define DRIVER_NAME	"mxs-mmc"
@@ -593,13 +592,13 @@
 	struct mxs_mmc_host *host;
 	struct mmc_host *mmc;
 	struct resource *iores, *dmares;
-	struct mxs_mmc_platform_data *pdata;
 	struct pinctrl *pinctrl;
 	int ret = 0, irq_err, irq_dma;
 	dma_cap_mask_t mask;
 	struct regulator *reg_vmmc;
 	enum of_gpio_flags flags;
 	struct mxs_ssp *ssp;
+	u32 bus_width = 0;
 
 	iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	dmares = platform_get_resource(pdev, IORESOURCE_DMA, 0);
@@ -682,25 +681,15 @@
 	mmc->caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED |
 		    MMC_CAP_SDIO_IRQ | MMC_CAP_NEEDS_POLL;
 
-	pdata =	mmc_dev(host->mmc)->platform_data;
-	if (!pdata) {
-		u32 bus_width = 0;
-		of_property_read_u32(np, "bus-width", &bus_width);
-		if (bus_width == 4)
-			mmc->caps |= MMC_CAP_4_BIT_DATA;
-		else if (bus_width == 8)
-			mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA;
-		host->wp_gpio = of_get_named_gpio_flags(np, "wp-gpios", 0,
-							&flags);
-		if (flags & OF_GPIO_ACTIVE_LOW)
-			host->wp_inverted = 1;
-	} else {
-		if (pdata->flags & SLOTF_8_BIT_CAPABLE)
-			mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA;
-		if (pdata->flags & SLOTF_4_BIT_CAPABLE)
-			mmc->caps |= MMC_CAP_4_BIT_DATA;
-		host->wp_gpio = pdata->wp_gpio;
-	}
+	of_property_read_u32(np, "bus-width", &bus_width);
+	if (bus_width == 4)
+		mmc->caps |= MMC_CAP_4_BIT_DATA;
+	else if (bus_width == 8)
+		mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA;
+	host->wp_gpio = of_get_named_gpio_flags(np, "wp-gpios", 0, &flags);
+
+	if (flags & OF_GPIO_ACTIVE_LOW)
+		host->wp_inverted = 1;
 
 	mmc->f_min = 400000;
 	mmc->f_max = 288000000;
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 8cfcec3..e1f3c11 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -37,6 +37,7 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 #include <linux/regulator/consumer.h>
+#include <linux/pinctrl/consumer.h>
 #include <linux/pm_runtime.h>
 #include <mach/hardware.h>
 #include <plat/mmc.h>
@@ -62,6 +63,7 @@
 
 #define VS18			(1 << 26)
 #define VS30			(1 << 25)
+#define HSS			(1 << 21)
 #define SDVS18			(0x5 << 9)
 #define SDVS30			(0x6 << 9)
 #define SDVS33			(0x7 << 9)
@@ -78,28 +80,17 @@
 #define CLKD_SHIFT		6
 #define DTO_MASK		0x000F0000
 #define DTO_SHIFT		16
-#define INT_EN_MASK		0x307F0033
-#define BWR_ENABLE		(1 << 4)
-#define BRR_ENABLE		(1 << 5)
-#define DTO_ENABLE		(1 << 20)
 #define INIT_STREAM		(1 << 1)
 #define DP_SELECT		(1 << 21)
 #define DDIR			(1 << 4)
-#define DMA_EN			0x1
+#define DMAE			0x1
 #define MSBS			(1 << 5)
 #define BCE			(1 << 1)
 #define FOUR_BIT		(1 << 1)
+#define HSPE			(1 << 2)
 #define DDR			(1 << 19)
 #define DW8			(1 << 5)
-#define CC			0x1
-#define TC			0x02
 #define OD			0x1
-#define ERR			(1 << 15)
-#define CMD_TIMEOUT		(1 << 16)
-#define DATA_TIMEOUT		(1 << 20)
-#define CMD_CRC			(1 << 17)
-#define DATA_CRC		(1 << 21)
-#define CARD_ERR		(1 << 28)
 #define STAT_CLEAR		0xFFFFFFFF
 #define INIT_STREAM_CMD		0x00000000
 #define DUAL_VOLT_OCR_BIT	7
@@ -108,6 +99,26 @@
 #define SOFTRESET		(1 << 1)
 #define RESETDONE		(1 << 0)
 
+/* Interrupt masks for IE and ISE register */
+#define CC_EN			(1 << 0)
+#define TC_EN			(1 << 1)
+#define BWR_EN			(1 << 4)
+#define BRR_EN			(1 << 5)
+#define ERR_EN			(1 << 15)
+#define CTO_EN			(1 << 16)
+#define CCRC_EN			(1 << 17)
+#define CEB_EN			(1 << 18)
+#define CIE_EN			(1 << 19)
+#define DTO_EN			(1 << 20)
+#define DCRC_EN			(1 << 21)
+#define DEB_EN			(1 << 22)
+#define CERR_EN			(1 << 28)
+#define BADA_EN			(1 << 29)
+
+#define INT_EN_MASK		(BADA_EN | CERR_EN | DEB_EN | DCRC_EN |\
+		DTO_EN | CIE_EN | CEB_EN | CCRC_EN | CTO_EN | \
+		BRR_EN | BWR_EN | TC_EN | CC_EN)
+
 #define MMC_AUTOSUSPEND_DELAY	100
 #define MMC_TIMEOUT_MS		20
 #define OMAP_MMC_MIN_CLOCK	400000
@@ -302,7 +313,7 @@
 
 	reg = regulator_get(host->dev, "vmmc");
 	if (IS_ERR(reg)) {
-		dev_dbg(host->dev, "vmmc regulator missing\n");
+		dev_err(host->dev, "vmmc regulator missing\n");
 		return PTR_ERR(reg);
 	} else {
 		mmc_slot(host).set_power = omap_hsmmc_set_power;
@@ -455,13 +466,13 @@
 	unsigned int irq_mask;
 
 	if (host->use_dma)
-		irq_mask = INT_EN_MASK & ~(BRR_ENABLE | BWR_ENABLE);
+		irq_mask = INT_EN_MASK & ~(BRR_EN | BWR_EN);
 	else
 		irq_mask = INT_EN_MASK;
 
 	/* Disable timeout for erases */
 	if (cmd->opcode == MMC_ERASE)
-		irq_mask &= ~DTO_ENABLE;
+		irq_mask &= ~DTO_EN;
 
 	OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR);
 	OMAP_HSMMC_WRITE(host->base, ISE, irq_mask);
@@ -494,6 +505,7 @@
 	struct mmc_ios *ios = &host->mmc->ios;
 	unsigned long regval;
 	unsigned long timeout;
+	unsigned long clkdiv;
 
 	dev_vdbg(mmc_dev(host->mmc), "Set clock to %uHz\n", ios->clock);
 
@@ -501,7 +513,8 @@
 
 	regval = OMAP_HSMMC_READ(host->base, SYSCTL);
 	regval = regval & ~(CLKD_MASK | DTO_MASK);
-	regval = regval | (calc_divisor(host, ios) << 6) | (DTO << 16);
+	clkdiv = calc_divisor(host, ios);
+	regval = regval | (clkdiv << 6) | (DTO << 16);
 	OMAP_HSMMC_WRITE(host->base, SYSCTL, regval);
 	OMAP_HSMMC_WRITE(host->base, SYSCTL,
 		OMAP_HSMMC_READ(host->base, SYSCTL) | ICE);
@@ -512,6 +525,27 @@
 		&& time_before(jiffies, timeout))
 		cpu_relax();
 
+	/*
+	 * Enable High-Speed Support
+	 * Pre-Requisites
+	 *	- Controller should support High-Speed-Enable Bit
+	 *	- Controller should not be using DDR Mode
+	 *	- Controller should advertise that it supports High Speed
+	 *	  in capabilities register
+	 *	- MMC/SD clock coming out of controller > 25MHz
+	 */
+	if ((mmc_slot(host).features & HSMMC_HAS_HSPE_SUPPORT) &&
+	    (ios->timing != MMC_TIMING_UHS_DDR50) &&
+	    ((OMAP_HSMMC_READ(host->base, CAPA) & HSS) == HSS)) {
+		regval = OMAP_HSMMC_READ(host->base, HCTL);
+		if (clkdiv && (clk_get_rate(host->fclk)/clkdiv) > 25000000)
+			regval |= HSPE;
+		else
+			regval &= ~HSPE;
+
+		OMAP_HSMMC_WRITE(host->base, HCTL, regval);
+	}
+
 	omap_hsmmc_start_clock(host);
 }
 
@@ -676,8 +710,8 @@
 	OMAP_HSMMC_WRITE(host->base, CMD, INIT_STREAM_CMD);
 
 	timeout = jiffies + msecs_to_jiffies(MMC_TIMEOUT_MS);
-	while ((reg != CC) && time_before(jiffies, timeout))
-		reg = OMAP_HSMMC_READ(host->base, STAT) & CC;
+	while ((reg != CC_EN) && time_before(jiffies, timeout))
+		reg = OMAP_HSMMC_READ(host->base, STAT) & CC_EN;
 
 	OMAP_HSMMC_WRITE(host->base, CON,
 		OMAP_HSMMC_READ(host->base, CON) & ~INIT_STREAM);
@@ -768,7 +802,7 @@
 	}
 
 	if (host->use_dma)
-		cmdreg |= DMA_EN;
+		cmdreg |= DMAE;
 
 	host->req_in_progress = 1;
 
@@ -968,16 +1002,20 @@
 			__func__);
 }
 
-static void hsmmc_command_incomplete(struct omap_hsmmc_host *host, int err)
+static void hsmmc_command_incomplete(struct omap_hsmmc_host *host,
+					int err, int end_cmd)
 {
-	omap_hsmmc_reset_controller_fsm(host, SRC);
-	host->cmd->error = err;
+	if (end_cmd) {
+		omap_hsmmc_reset_controller_fsm(host, SRC);
+		if (host->cmd)
+			host->cmd->error = err;
+	}
 
 	if (host->data) {
 		omap_hsmmc_reset_controller_fsm(host, SRD);
 		omap_hsmmc_dma_cleanup(host, err);
-	}
-
+	} else if (host->mrq && host->mrq->cmd)
+		host->mrq->cmd->error = err;
 }
 
 static void omap_hsmmc_do_irq(struct omap_hsmmc_host *host, int status)
@@ -988,23 +1026,25 @@
 	data = host->data;
 	dev_vdbg(mmc_dev(host->mmc), "IRQ Status is %x\n", status);
 
-	if (status & ERR) {
+	if (status & ERR_EN) {
 		omap_hsmmc_dbg_report_irq(host, status);
-		if (status & (CMD_TIMEOUT | DATA_TIMEOUT))
-			hsmmc_command_incomplete(host, -ETIMEDOUT);
-		else if (status & (CMD_CRC | DATA_CRC))
-			hsmmc_command_incomplete(host, -EILSEQ);
 
-		end_cmd = 1;
+		if (status & (CTO_EN | CCRC_EN))
+			end_cmd = 1;
+		if (status & (CTO_EN | DTO_EN))
+			hsmmc_command_incomplete(host, -ETIMEDOUT, end_cmd);
+		else if (status & (CCRC_EN | DCRC_EN))
+			hsmmc_command_incomplete(host, -EILSEQ, end_cmd);
+
 		if (host->data || host->response_busy) {
-			end_trans = 1;
+			end_trans = !end_cmd;
 			host->response_busy = 0;
 		}
 	}
 
-	if (end_cmd || ((status & CC) && host->cmd))
+	if (end_cmd || ((status & CC_EN) && host->cmd))
 		omap_hsmmc_cmd_done(host, host->cmd);
-	if ((end_trans || (status & TC)) && host->mrq)
+	if ((end_trans || (status & TC_EN)) && host->mrq)
 		omap_hsmmc_xfer_done(host, data);
 }
 
@@ -1101,7 +1141,7 @@
 
 	return 0;
 err:
-	dev_dbg(mmc_dev(host->mmc), "Unable to switch operating voltage\n");
+	dev_err(mmc_dev(host->mmc), "Unable to switch operating voltage\n");
 	return ret;
 }
 
@@ -1360,7 +1400,7 @@
 	if (host->use_dma) {
 		ret = omap_hsmmc_start_dma_transfer(host, req);
 		if (ret != 0) {
-			dev_dbg(mmc_dev(host->mmc), "MMC start dma failure\n");
+			dev_err(mmc_dev(host->mmc), "MMC start dma failure\n");
 			return ret;
 		}
 	}
@@ -1678,7 +1718,7 @@
 {
 	struct omap_mmc_platform_data *pdata;
 	struct device_node *np = dev->of_node;
-	u32 bus_width;
+	u32 bus_width, max_freq;
 
 	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
 	if (!pdata)
@@ -1705,6 +1745,12 @@
 	if (of_find_property(np, "ti,needs-special-reset", NULL))
 		pdata->slots[0].features |= HSMMC_HAS_UPDATED_RESET;
 
+	if (!of_property_read_u32(np, "max-frequency", &max_freq))
+		pdata->max_freq = max_freq;
+
+	if (of_find_property(np, "ti,needs-special-hs-handling", NULL))
+		pdata->slots[0].features |= HSMMC_HAS_HSPE_SUPPORT;
+
 	return pdata;
 }
 #else
@@ -1725,6 +1771,7 @@
 	const struct of_device_id *match;
 	dma_cap_mask_t mask;
 	unsigned tx_req, rx_req;
+	struct pinctrl *pinctrl;
 
 	match = of_match_device(of_match_ptr(omap_mmc_of_match), &pdev->dev);
 	if (match) {
@@ -1821,7 +1868,6 @@
 	 * MMC can still work without debounce clock.
 	 */
 	if (IS_ERR(host->dbclk)) {
-		dev_warn(mmc_dev(host->mmc), "Failed to get debounce clk\n");
 		host->dbclk = NULL;
 	} else if (clk_prepare_enable(host->dbclk) != 0) {
 		dev_warn(mmc_dev(host->mmc), "Failed to enable debounce clk\n");
@@ -1889,13 +1935,13 @@
 	ret = request_irq(host->irq, omap_hsmmc_irq, 0,
 			mmc_hostname(mmc), host);
 	if (ret) {
-		dev_dbg(mmc_dev(host->mmc), "Unable to grab HSMMC IRQ\n");
+		dev_err(mmc_dev(host->mmc), "Unable to grab HSMMC IRQ\n");
 		goto err_irq;
 	}
 
 	if (pdata->init != NULL) {
 		if (pdata->init(&pdev->dev) != 0) {
-			dev_dbg(mmc_dev(host->mmc),
+			dev_err(mmc_dev(host->mmc),
 				"Unable to configure MMC IRQs\n");
 			goto err_irq_cd_init;
 		}
@@ -1918,7 +1964,7 @@
 					   IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
 					   mmc_hostname(mmc), host);
 		if (ret) {
-			dev_dbg(mmc_dev(host->mmc),
+			dev_err(mmc_dev(host->mmc),
 				"Unable to grab MMC CD IRQ\n");
 			goto err_irq_cd;
 		}
@@ -1928,6 +1974,11 @@
 
 	omap_hsmmc_disable_irq(host);
 
+	pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
+	if (IS_ERR(pinctrl))
+		dev_warn(&pdev->dev,
+			"pins are not configured from the driver\n");
+
 	omap_hsmmc_protect_card(host);
 
 	mmc_add_host(mmc);
@@ -2027,6 +2078,25 @@
 }
 
 #ifdef CONFIG_PM
+static int omap_hsmmc_prepare(struct device *dev)
+{
+	struct omap_hsmmc_host *host = dev_get_drvdata(dev);
+
+	if (host->pdata->suspend)
+		return host->pdata->suspend(dev, host->slot_id);
+
+	return 0;
+}
+
+static void omap_hsmmc_complete(struct device *dev)
+{
+	struct omap_hsmmc_host *host = dev_get_drvdata(dev);
+
+	if (host->pdata->resume)
+		host->pdata->resume(dev, host->slot_id);
+
+}
+
 static int omap_hsmmc_suspend(struct device *dev)
 {
 	int ret = 0;
@@ -2040,23 +2110,10 @@
 
 	pm_runtime_get_sync(host->dev);
 	host->suspended = 1;
-	if (host->pdata->suspend) {
-		ret = host->pdata->suspend(dev, host->slot_id);
-		if (ret) {
-			dev_dbg(dev, "Unable to handle MMC board"
-					" level suspend\n");
-			host->suspended = 0;
-			return ret;
-		}
-	}
 	ret = mmc_suspend_host(host->mmc);
 
 	if (ret) {
 		host->suspended = 0;
-		if (host->pdata->resume) {
-			if (host->pdata->resume(dev, host->slot_id))
-				dev_dbg(dev, "Unmask interrupt failed\n");
-		}
 		goto err;
 	}
 
@@ -2093,12 +2150,6 @@
 	if (!(host->mmc->pm_flags & MMC_PM_KEEP_POWER))
 		omap_hsmmc_conf_bus_power(host);
 
-	if (host->pdata->resume) {
-		ret = host->pdata->resume(dev, host->slot_id);
-		if (ret)
-			dev_dbg(dev, "Unmask interrupt failed\n");
-	}
-
 	omap_hsmmc_protect_card(host);
 
 	/* Notify the core to resume the host */
@@ -2114,8 +2165,10 @@
 }
 
 #else
+#define omap_hsmmc_prepare	NULL
+#define omap_hsmmc_complete	NULL
 #define omap_hsmmc_suspend	NULL
-#define omap_hsmmc_resume		NULL
+#define omap_hsmmc_resume	NULL
 #endif
 
 static int omap_hsmmc_runtime_suspend(struct device *dev)
@@ -2143,6 +2196,8 @@
 static struct dev_pm_ops omap_hsmmc_dev_pm_ops = {
 	.suspend	= omap_hsmmc_suspend,
 	.resume		= omap_hsmmc_resume,
+	.prepare	= omap_hsmmc_prepare,
+	.complete	= omap_hsmmc_complete,
 	.runtime_suspend = omap_hsmmc_runtime_suspend,
 	.runtime_resume = omap_hsmmc_runtime_resume,
 };
diff --git a/drivers/mmc/host/sdhci-acpi.c b/drivers/mmc/host/sdhci-acpi.c
new file mode 100644
index 0000000..12b0a78
--- /dev/null
+++ b/drivers/mmc/host/sdhci-acpi.c
@@ -0,0 +1,312 @@
+/*
+ * Secure Digital Host Controller Interface ACPI driver.
+ *
+ * Copyright (c) 2012, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/export.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/dma-mapping.h>
+#include <linux/compiler.h>
+#include <linux/stddef.h>
+#include <linux/bitops.h>
+#include <linux/types.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/acpi.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
+
+#include <linux/mmc/host.h>
+#include <linux/mmc/pm.h>
+#include <linux/mmc/sdhci.h>
+
+#include "sdhci.h"
+
+enum {
+	SDHCI_ACPI_SD_CD	= BIT(0),
+	SDHCI_ACPI_RUNTIME_PM	= BIT(1),
+};
+
+struct sdhci_acpi_chip {
+	const struct	sdhci_ops *ops;
+	unsigned int	quirks;
+	unsigned int	quirks2;
+	unsigned long	caps;
+	unsigned int	caps2;
+	mmc_pm_flag_t	pm_caps;
+};
+
+struct sdhci_acpi_slot {
+	const struct	sdhci_acpi_chip *chip;
+	unsigned int	quirks;
+	unsigned int	quirks2;
+	unsigned long	caps;
+	unsigned int	caps2;
+	mmc_pm_flag_t	pm_caps;
+	unsigned int	flags;
+};
+
+struct sdhci_acpi_host {
+	struct sdhci_host		*host;
+	const struct sdhci_acpi_slot	*slot;
+	struct platform_device		*pdev;
+	bool				use_runtime_pm;
+};
+
+static inline bool sdhci_acpi_flag(struct sdhci_acpi_host *c, unsigned int flag)
+{
+	return c->slot && (c->slot->flags & flag);
+}
+
+static int sdhci_acpi_enable_dma(struct sdhci_host *host)
+{
+	return 0;
+}
+
+static const struct sdhci_ops sdhci_acpi_ops_dflt = {
+	.enable_dma = sdhci_acpi_enable_dma,
+};
+
+static const struct sdhci_acpi_slot sdhci_acpi_slot_int_sdio = {
+	.quirks2 = SDHCI_QUIRK2_HOST_OFF_CARD_ON,
+	.caps    = MMC_CAP_NONREMOVABLE | MMC_CAP_POWER_OFF_CARD,
+	.flags   = SDHCI_ACPI_RUNTIME_PM,
+	.pm_caps = MMC_PM_KEEP_POWER,
+};
+
+static const struct acpi_device_id sdhci_acpi_ids[] = {
+	{ "INT33C6", (kernel_ulong_t)&sdhci_acpi_slot_int_sdio },
+	{ "PNP0D40" },
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, sdhci_acpi_ids);
+
+static const struct sdhci_acpi_slot *sdhci_acpi_get_slot(const char *hid)
+{
+	const struct acpi_device_id *id;
+
+	for (id = sdhci_acpi_ids; id->id[0]; id++)
+		if (!strcmp(id->id, hid))
+			return (const struct sdhci_acpi_slot *)id->driver_data;
+	return NULL;
+}
+
+static int __devinit sdhci_acpi_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	acpi_handle handle = ACPI_HANDLE(dev);
+	struct acpi_device *device;
+	struct sdhci_acpi_host *c;
+	struct sdhci_host *host;
+	struct resource *iomem;
+	resource_size_t len;
+	const char *hid;
+	int err;
+
+	if (acpi_bus_get_device(handle, &device))
+		return -ENODEV;
+
+	if (acpi_bus_get_status(device) || !device->status.present)
+		return -ENODEV;
+
+	hid = acpi_device_hid(device);
+
+	iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!iomem)
+		return -ENOMEM;
+
+	len = resource_size(iomem);
+	if (len < 0x100)
+		dev_err(dev, "Invalid iomem size!\n");
+
+	if (!devm_request_mem_region(dev, iomem->start, len, dev_name(dev)))
+		return -ENOMEM;
+
+	host = sdhci_alloc_host(dev, sizeof(struct sdhci_acpi_host));
+	if (IS_ERR(host))
+		return PTR_ERR(host);
+
+	c = sdhci_priv(host);
+	c->host = host;
+	c->slot = sdhci_acpi_get_slot(hid);
+	c->pdev = pdev;
+	c->use_runtime_pm = sdhci_acpi_flag(c, SDHCI_ACPI_RUNTIME_PM);
+
+	platform_set_drvdata(pdev, c);
+
+	host->hw_name	= "ACPI";
+	host->ops	= &sdhci_acpi_ops_dflt;
+	host->irq	= platform_get_irq(pdev, 0);
+
+	host->ioaddr = devm_ioremap_nocache(dev, iomem->start,
+					    resource_size(iomem));
+	if (host->ioaddr == NULL) {
+		err = -ENOMEM;
+		goto err_free;
+	}
+
+	if (!dev->dma_mask) {
+		u64 dma_mask;
+
+		if (sdhci_readl(host, SDHCI_CAPABILITIES) & SDHCI_CAN_64BIT) {
+			/* 64-bit DMA is not supported at present */
+			dma_mask = DMA_BIT_MASK(32);
+		} else {
+			dma_mask = DMA_BIT_MASK(32);
+		}
+
+		dev->dma_mask = &dev->coherent_dma_mask;
+		dev->coherent_dma_mask = dma_mask;
+	}
+
+	if (c->slot) {
+		if (c->slot->chip) {
+			host->ops            = c->slot->chip->ops;
+			host->quirks        |= c->slot->chip->quirks;
+			host->quirks2       |= c->slot->chip->quirks2;
+			host->mmc->caps     |= c->slot->chip->caps;
+			host->mmc->caps2    |= c->slot->chip->caps2;
+			host->mmc->pm_caps  |= c->slot->chip->pm_caps;
+		}
+		host->quirks        |= c->slot->quirks;
+		host->quirks2       |= c->slot->quirks2;
+		host->mmc->caps     |= c->slot->caps;
+		host->mmc->caps2    |= c->slot->caps2;
+		host->mmc->pm_caps  |= c->slot->pm_caps;
+	}
+
+	err = sdhci_add_host(host);
+	if (err)
+		goto err_free;
+
+	if (c->use_runtime_pm) {
+		pm_suspend_ignore_children(dev, 1);
+		pm_runtime_set_autosuspend_delay(dev, 50);
+		pm_runtime_use_autosuspend(dev);
+		pm_runtime_enable(dev);
+	}
+
+	return 0;
+
+err_free:
+	platform_set_drvdata(pdev, NULL);
+	sdhci_free_host(c->host);
+	return err;
+}
+
+static int __devexit sdhci_acpi_remove(struct platform_device *pdev)
+{
+	struct sdhci_acpi_host *c = platform_get_drvdata(pdev);
+	struct device *dev = &pdev->dev;
+	int dead;
+
+	if (c->use_runtime_pm) {
+		pm_runtime_get_sync(dev);
+		pm_runtime_disable(dev);
+		pm_runtime_put_noidle(dev);
+	}
+
+	dead = (sdhci_readl(c->host, SDHCI_INT_STATUS) == ~0);
+	sdhci_remove_host(c->host, dead);
+	platform_set_drvdata(pdev, NULL);
+	sdhci_free_host(c->host);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+
+static int sdhci_acpi_suspend(struct device *dev)
+{
+	struct sdhci_acpi_host *c = dev_get_drvdata(dev);
+
+	return sdhci_suspend_host(c->host);
+}
+
+static int sdhci_acpi_resume(struct device *dev)
+{
+	struct sdhci_acpi_host *c = dev_get_drvdata(dev);
+
+	return sdhci_resume_host(c->host);
+}
+
+#else
+
+#define sdhci_acpi_suspend	NULL
+#define sdhci_acpi_resume	NULL
+
+#endif
+
+#ifdef CONFIG_PM_RUNTIME
+
+static int sdhci_acpi_runtime_suspend(struct device *dev)
+{
+	struct sdhci_acpi_host *c = dev_get_drvdata(dev);
+
+	return sdhci_runtime_suspend_host(c->host);
+}
+
+static int sdhci_acpi_runtime_resume(struct device *dev)
+{
+	struct sdhci_acpi_host *c = dev_get_drvdata(dev);
+
+	return sdhci_runtime_resume_host(c->host);
+}
+
+static int sdhci_acpi_runtime_idle(struct device *dev)
+{
+	return 0;
+}
+
+#else
+
+#define sdhci_acpi_runtime_suspend	NULL
+#define sdhci_acpi_runtime_resume	NULL
+#define sdhci_acpi_runtime_idle		NULL
+
+#endif
+
+static const struct dev_pm_ops sdhci_acpi_pm_ops = {
+	.suspend		= sdhci_acpi_suspend,
+	.resume			= sdhci_acpi_resume,
+	.runtime_suspend	= sdhci_acpi_runtime_suspend,
+	.runtime_resume		= sdhci_acpi_runtime_resume,
+	.runtime_idle		= sdhci_acpi_runtime_idle,
+};
+
+static struct platform_driver sdhci_acpi_driver = {
+	.driver = {
+		.name			= "sdhci-acpi",
+		.owner			= THIS_MODULE,
+		.acpi_match_table	= sdhci_acpi_ids,
+		.pm			= &sdhci_acpi_pm_ops,
+	},
+	.probe	= sdhci_acpi_probe,
+	.remove	= __devexit_p(sdhci_acpi_remove),
+};
+
+module_platform_driver(sdhci_acpi_driver);
+
+MODULE_DESCRIPTION("Secure Digital Host Controller Interface ACPI driver");
+MODULE_AUTHOR("Adrian Hunter");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mmc/host/sdhci-dove.c b/drivers/mmc/host/sdhci-dove.c
index 5f4d033..169fab9 100644
--- a/drivers/mmc/host/sdhci-dove.c
+++ b/drivers/mmc/host/sdhci-dove.c
@@ -19,20 +19,30 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#include <linux/err.h>
-#include <linux/io.h>
 #include <linux/clk.h>
 #include <linux/err.h>
-#include <linux/module.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
 #include <linux/mmc/host.h>
+#include <linux/module.h>
 #include <linux/of.h>
+#include <linux/of_gpio.h>
 
 #include "sdhci-pltfm.h"
 
 struct sdhci_dove_priv {
 	struct clk *clk;
+	int gpio_cd;
 };
 
+static irqreturn_t sdhci_dove_carddetect_irq(int irq, void *data)
+{
+	struct sdhci_host *host = data;
+
+	tasklet_schedule(&host->card_tasklet);
+	return IRQ_HANDLED;
+}
+
 static u16 sdhci_dove_readw(struct sdhci_host *host, int reg)
 {
 	u16 ret;
@@ -50,16 +60,25 @@
 
 static u32 sdhci_dove_readl(struct sdhci_host *host, int reg)
 {
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_dove_priv *priv = pltfm_host->priv;
 	u32 ret;
 
+	ret = readl(host->ioaddr + reg);
+
 	switch (reg) {
 	case SDHCI_CAPABILITIES:
-		ret = readl(host->ioaddr + reg);
 		/* Mask the support for 3.0V */
 		ret &= ~SDHCI_CAN_VDD_300;
 		break;
-	default:
-		ret = readl(host->ioaddr + reg);
+	case SDHCI_PRESENT_STATE:
+		if (gpio_is_valid(priv->gpio_cd)) {
+			if (gpio_get_value(priv->gpio_cd) == 0)
+				ret |= SDHCI_CARD_PRESENT;
+			else
+				ret &= ~SDHCI_CARD_PRESENT;
+		}
+		break;
 	}
 	return ret;
 }
@@ -92,25 +111,70 @@
 		return -ENOMEM;
 	}
 
-	priv->clk = clk_get(&pdev->dev, NULL);
-	if (!IS_ERR(priv->clk))
-		clk_prepare_enable(priv->clk);
+	priv->clk = devm_clk_get(&pdev->dev, NULL);
 
-	ret = sdhci_pltfm_register(pdev, &sdhci_dove_pdata);
-	if (ret)
-		goto sdhci_dove_register_fail;
+	if (pdev->dev.of_node) {
+		priv->gpio_cd = of_get_named_gpio(pdev->dev.of_node,
+						  "cd-gpios", 0);
+	} else {
+		priv->gpio_cd = -EINVAL;
+	}
 
-	host = platform_get_drvdata(pdev);
+	if (gpio_is_valid(priv->gpio_cd)) {
+		ret = gpio_request(priv->gpio_cd, "sdhci-cd");
+		if (ret) {
+			dev_err(&pdev->dev, "card detect gpio request failed: %d\n",
+				ret);
+			return ret;
+		}
+		gpio_direction_input(priv->gpio_cd);
+	}
+
+	host = sdhci_pltfm_init(pdev, &sdhci_dove_pdata);
+	if (IS_ERR(host)) {
+		ret = PTR_ERR(host);
+		goto err_sdhci_pltfm_init;
+	}
+
 	pltfm_host = sdhci_priv(host);
 	pltfm_host->priv = priv;
 
+	if (!IS_ERR(priv->clk))
+		clk_prepare_enable(priv->clk);
+
+	sdhci_get_of_property(pdev);
+
+	ret = sdhci_add_host(host);
+	if (ret)
+		goto err_sdhci_add;
+
+	/*
+	 * We must request the IRQ after sdhci_add_host(), as the tasklet only
+	 * gets setup in sdhci_add_host() and we oops.
+	 */
+	if (gpio_is_valid(priv->gpio_cd)) {
+		ret = request_irq(gpio_to_irq(priv->gpio_cd),
+				  sdhci_dove_carddetect_irq,
+				  IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+				  mmc_hostname(host->mmc), host);
+		if (ret) {
+			dev_err(&pdev->dev, "card detect irq request failed: %d\n",
+				ret);
+			goto err_request_irq;
+		}
+	}
+
 	return 0;
 
-sdhci_dove_register_fail:
-	if (!IS_ERR(priv->clk)) {
+err_request_irq:
+	sdhci_remove_host(host, 0);
+err_sdhci_add:
+	if (!IS_ERR(priv->clk))
 		clk_disable_unprepare(priv->clk);
-		clk_put(priv->clk);
-	}
+	sdhci_pltfm_free(pdev);
+err_sdhci_pltfm_init:
+	if (gpio_is_valid(priv->gpio_cd))
+		gpio_free(priv->gpio_cd);
 	return ret;
 }
 
@@ -122,10 +186,14 @@
 
 	sdhci_pltfm_unregister(pdev);
 
-	if (!IS_ERR(priv->clk)) {
-		clk_disable_unprepare(priv->clk);
-		clk_put(priv->clk);
+	if (gpio_is_valid(priv->gpio_cd)) {
+		free_irq(gpio_to_irq(priv->gpio_cd), host);
+		gpio_free(priv->gpio_cd);
 	}
+
+	if (!IS_ERR(priv->clk))
+		clk_disable_unprepare(priv->clk);
+
 	return 0;
 }
 
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index 8d54fd7..e07df81 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -456,10 +456,10 @@
 
 	pltfm_host = sdhci_priv(host);
 
-	imx_data = kzalloc(sizeof(struct pltfm_imx_data), GFP_KERNEL);
+	imx_data = devm_kzalloc(&pdev->dev, sizeof(*imx_data), GFP_KERNEL);
 	if (!imx_data) {
 		err = -ENOMEM;
-		goto err_imx_data;
+		goto free_sdhci;
 	}
 
 	if (of_id)
@@ -470,19 +470,19 @@
 	imx_data->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
 	if (IS_ERR(imx_data->clk_ipg)) {
 		err = PTR_ERR(imx_data->clk_ipg);
-		goto err_clk_get;
+		goto free_sdhci;
 	}
 
 	imx_data->clk_ahb = devm_clk_get(&pdev->dev, "ahb");
 	if (IS_ERR(imx_data->clk_ahb)) {
 		err = PTR_ERR(imx_data->clk_ahb);
-		goto err_clk_get;
+		goto free_sdhci;
 	}
 
 	imx_data->clk_per = devm_clk_get(&pdev->dev, "per");
 	if (IS_ERR(imx_data->clk_per)) {
 		err = PTR_ERR(imx_data->clk_per);
-		goto err_clk_get;
+		goto free_sdhci;
 	}
 
 	pltfm_host->clk = imx_data->clk_per;
@@ -494,7 +494,7 @@
 	imx_data->pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
 	if (IS_ERR(imx_data->pinctrl)) {
 		err = PTR_ERR(imx_data->pinctrl);
-		goto pin_err;
+		goto disable_clk;
 	}
 
 	host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
@@ -519,7 +519,7 @@
 		if (!host->mmc->parent->platform_data) {
 			dev_err(mmc_dev(host->mmc), "no board data!\n");
 			err = -EINVAL;
-			goto no_board_data;
+			goto disable_clk;
 		}
 		imx_data->boarddata = *((struct esdhc_platform_data *)
 					host->mmc->parent->platform_data);
@@ -527,7 +527,8 @@
 
 	/* write_protect */
 	if (boarddata->wp_type == ESDHC_WP_GPIO) {
-		err = gpio_request_one(boarddata->wp_gpio, GPIOF_IN, "ESDHC_WP");
+		err = devm_gpio_request_one(&pdev->dev, boarddata->wp_gpio,
+					    GPIOF_IN, "ESDHC_WP");
 		if (err) {
 			dev_warn(mmc_dev(host->mmc),
 				 "no write-protect pin available!\n");
@@ -543,19 +544,21 @@
 
 	switch (boarddata->cd_type) {
 	case ESDHC_CD_GPIO:
-		err = gpio_request_one(boarddata->cd_gpio, GPIOF_IN, "ESDHC_CD");
+		err = devm_gpio_request_one(&pdev->dev, boarddata->cd_gpio,
+					    GPIOF_IN, "ESDHC_CD");
 		if (err) {
 			dev_err(mmc_dev(host->mmc),
 				"no card-detect pin available!\n");
-			goto no_card_detect_pin;
+			goto disable_clk;
 		}
 
-		err = request_irq(gpio_to_irq(boarddata->cd_gpio), cd_irq,
+		err = devm_request_irq(&pdev->dev,
+				 gpio_to_irq(boarddata->cd_gpio), cd_irq,
 				 IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
 				 mmc_hostname(host->mmc), host);
 		if (err) {
 			dev_err(mmc_dev(host->mmc), "request irq error\n");
-			goto no_card_detect_irq;
+			goto disable_clk;
 		}
 		/* fall through */
 
@@ -574,27 +577,15 @@
 
 	err = sdhci_add_host(host);
 	if (err)
-		goto err_add_host;
+		goto disable_clk;
 
 	return 0;
 
-err_add_host:
-	if (gpio_is_valid(boarddata->cd_gpio))
-		free_irq(gpio_to_irq(boarddata->cd_gpio), host);
-no_card_detect_irq:
-	if (gpio_is_valid(boarddata->cd_gpio))
-		gpio_free(boarddata->cd_gpio);
-	if (gpio_is_valid(boarddata->wp_gpio))
-		gpio_free(boarddata->wp_gpio);
-no_card_detect_pin:
-no_board_data:
-pin_err:
+disable_clk:
 	clk_disable_unprepare(imx_data->clk_per);
 	clk_disable_unprepare(imx_data->clk_ipg);
 	clk_disable_unprepare(imx_data->clk_ahb);
-err_clk_get:
-	kfree(imx_data);
-err_imx_data:
+free_sdhci:
 	sdhci_pltfm_free(pdev);
 	return err;
 }
@@ -604,25 +595,14 @@
 	struct sdhci_host *host = platform_get_drvdata(pdev);
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 	struct pltfm_imx_data *imx_data = pltfm_host->priv;
-	struct esdhc_platform_data *boarddata = &imx_data->boarddata;
 	int dead = (readl(host->ioaddr + SDHCI_INT_STATUS) == 0xffffffff);
 
 	sdhci_remove_host(host, dead);
 
-	if (gpio_is_valid(boarddata->wp_gpio))
-		gpio_free(boarddata->wp_gpio);
-
-	if (gpio_is_valid(boarddata->cd_gpio)) {
-		free_irq(gpio_to_irq(boarddata->cd_gpio), host);
-		gpio_free(boarddata->cd_gpio);
-	}
-
 	clk_disable_unprepare(imx_data->clk_per);
 	clk_disable_unprepare(imx_data->clk_ipg);
 	clk_disable_unprepare(imx_data->clk_ahb);
 
-	kfree(imx_data);
-
 	sdhci_pltfm_free(pdev);
 
 	return 0;
diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c
index 6617d67..f32526d 100644
--- a/drivers/mmc/host/sdhci-of-esdhc.c
+++ b/drivers/mmc/host/sdhci-of-esdhc.c
@@ -22,6 +22,7 @@
 #include "sdhci-esdhc.h"
 
 #define VENDOR_V_22	0x12
+#define VENDOR_V_23	0x13
 static u32 esdhc_readl(struct sdhci_host *host, int reg)
 {
 	u32 ret;
@@ -85,6 +86,18 @@
 	return ret;
 }
 
+static void esdhc_writel(struct sdhci_host *host, u32 val, int reg)
+{
+	/*
+	 * Enable IRQSTATEN[BGESEN] is just to set IRQSTAT[BGE]
+	 * when SYSCTL[RSTD]) is set for some special operations.
+	 * No any impact other operation.
+	 */
+	if (reg == SDHCI_INT_ENABLE)
+		val |= SDHCI_INT_BLK_GAP;
+	sdhci_be32bs_writel(host, val, reg);
+}
+
 static void esdhc_writew(struct sdhci_host *host, u16 val, int reg)
 {
 	if (reg == SDHCI_BLOCK_SIZE) {
@@ -121,6 +134,41 @@
 	sdhci_be32bs_writeb(host, val, reg);
 }
 
+/*
+ * For Abort or Suspend after Stop at Block Gap, ignore the ADMA
+ * error(IRQSTAT[ADMAE]) if both Transfer Complete(IRQSTAT[TC])
+ * and Block Gap Event(IRQSTAT[BGE]) are also set.
+ * For Continue, apply soft reset for data(SYSCTL[RSTD]);
+ * and re-issue the entire read transaction from beginning.
+ */
+static void esdhci_of_adma_workaround(struct sdhci_host *host, u32 intmask)
+{
+	u32 tmp;
+	bool applicable;
+	dma_addr_t dmastart;
+	dma_addr_t dmanow;
+
+	tmp = in_be32(host->ioaddr + SDHCI_SLOT_INT_STATUS);
+	tmp = (tmp & SDHCI_VENDOR_VER_MASK) >> SDHCI_VENDOR_VER_SHIFT;
+
+	applicable = (intmask & SDHCI_INT_DATA_END) &&
+		(intmask & SDHCI_INT_BLK_GAP) &&
+		(tmp == VENDOR_V_23);
+	if (!applicable)
+		return;
+
+	host->data->error = 0;
+	dmastart = sg_dma_address(host->data->sg);
+	dmanow = dmastart + host->data->bytes_xfered;
+	/*
+	 * Force update to the next DMA block boundary.
+	 */
+	dmanow = (dmanow & ~(SDHCI_DEFAULT_BOUNDARY_SIZE - 1)) +
+		SDHCI_DEFAULT_BOUNDARY_SIZE;
+	host->data->bytes_xfered = dmanow - dmastart;
+	sdhci_writel(host, dmanow, SDHCI_DMA_ADDRESS);
+}
+
 static int esdhc_of_enable_dma(struct sdhci_host *host)
 {
 	setbits32(host->ioaddr + ESDHC_DMA_SYSCTL, ESDHC_DMA_SNOOP);
@@ -177,13 +225,16 @@
 	vvn = (vvn & SDHCI_VENDOR_VER_MASK) >> SDHCI_VENDOR_VER_SHIFT;
 	if (vvn == VENDOR_V_22)
 		host->quirks2 |= SDHCI_QUIRK2_HOST_NO_CMD23;
+
+	if (vvn > VENDOR_V_22)
+		host->quirks &= ~SDHCI_QUIRK_NO_BUSY_IRQ;
 }
 
 static struct sdhci_ops sdhci_esdhc_ops = {
 	.read_l = esdhc_readl,
 	.read_w = esdhc_readw,
 	.read_b = esdhc_readb,
-	.write_l = sdhci_be32bs_writel,
+	.write_l = esdhc_writel,
 	.write_w = esdhc_writew,
 	.write_b = esdhc_writeb,
 	.set_clock = esdhc_of_set_clock,
@@ -195,6 +246,7 @@
 	.platform_suspend = esdhc_of_suspend,
 	.platform_resume = esdhc_of_resume,
 #endif
+	.adma_workaround = esdhci_of_adma_workaround,
 };
 
 static struct sdhci_pltfm_data sdhci_esdhc_pdata = {
diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
index d01aa61..c7dd0cb 100644
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -114,6 +114,7 @@
 
 		SDHCI_TIMEOUT_CLK_UNIT |
 		SDHCI_CAN_VDD_330 |
+		SDHCI_CAN_DO_HISPD |
 		SDHCI_CAN_DO_SDMA;
 	return 0;
 }
diff --git a/drivers/mmc/host/sdhci-pltfm.c b/drivers/mmc/host/sdhci-pltfm.c
index 2716445..d4283ef 100644
--- a/drivers/mmc/host/sdhci-pltfm.c
+++ b/drivers/mmc/host/sdhci-pltfm.c
@@ -78,6 +78,9 @@
 		if (of_get_property(np, "broken-cd", NULL))
 			host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION;
 
+		if (of_get_property(np, "no-1-8-v", NULL))
+			host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V;
+
 		if (of_device_is_compatible(np, "fsl,p2020-rev1-esdhc"))
 			host->quirks |= SDHCI_QUIRK_BROKEN_DMA;
 
@@ -89,6 +92,12 @@
 		clk = of_get_property(np, "clock-frequency", &size);
 		if (clk && size == sizeof(*clk) && *clk)
 			pltfm_host->clock = be32_to_cpup(clk);
+
+		if (of_find_property(np, "keep-power-in-suspend", NULL))
+			host->mmc->pm_caps |= MMC_PM_KEEP_POWER;
+
+		if (of_find_property(np, "enable-sdio-wakeup", NULL))
+			host->mmc->pm_caps |= MMC_PM_WAKE_SDIO_IRQ;
 	}
 }
 #else
diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
index 186dfc3..fad0966 100644
--- a/drivers/mmc/host/sdhci-pxav3.c
+++ b/drivers/mmc/host/sdhci-pxav3.c
@@ -163,10 +163,18 @@
 	return 0;
 }
 
+static u32 pxav3_get_max_clock(struct sdhci_host *host)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+
+	return clk_get_rate(pltfm_host->clk);
+}
+
 static struct sdhci_ops pxav3_sdhci_ops = {
 	.platform_reset_exit = pxav3_set_private_registers,
 	.set_uhs_signaling = pxav3_set_uhs_signaling,
 	.platform_send_init_74_clocks = pxav3_gen_init_74_clocks,
+	.get_max_clock = pxav3_get_max_clock,
 };
 
 #ifdef CONFIG_OF
@@ -249,7 +257,8 @@
 
 	host->quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL
 		| SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC
-		| SDHCI_QUIRK_32BIT_ADMA_SIZE;
+		| SDHCI_QUIRK_32BIT_ADMA_SIZE
+		| SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN;
 
 	/* enable 1/8V DDR capable */
 	host->mmc->caps |= MMC_CAP_1_8V_DDR;
@@ -271,6 +280,8 @@
 
 		if (pdata->quirks)
 			host->quirks |= pdata->quirks;
+		if (pdata->quirks2)
+			host->quirks2 |= pdata->quirks2;
 		if (pdata->host_caps)
 			host->mmc->caps |= pdata->host_caps;
 		if (pdata->host_caps2)
diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
index fe21ed4..82a8de1 100644
--- a/drivers/mmc/host/sdhci-s3c.c
+++ b/drivers/mmc/host/sdhci-s3c.c
@@ -24,6 +24,7 @@
 #include <linux/of_gpio.h>
 #include <linux/pm.h>
 #include <linux/pm_runtime.h>
+#include <linux/pinctrl/consumer.h>
 
 #include <linux/mmc/host.h>
 
@@ -57,6 +58,7 @@
 	int			ext_cd_irq;
 	int			ext_cd_gpio;
 	int			*gpios;
+	struct pinctrl          *pctrl;
 
 	struct clk		*clk_io;
 	struct clk		*clk_bus[MAX_BUS_CLK];
@@ -373,18 +375,27 @@
 static void sdhci_s3c_notify_change(struct platform_device *dev, int state)
 {
 	struct sdhci_host *host = platform_get_drvdata(dev);
+#ifdef CONFIG_PM_RUNTIME
+	struct sdhci_s3c *sc = sdhci_priv(host);
+#endif
 	unsigned long flags;
 
 	if (host) {
 		spin_lock_irqsave(&host->lock, flags);
 		if (state) {
 			dev_dbg(&dev->dev, "card inserted.\n");
+#ifdef CONFIG_PM_RUNTIME
+			clk_prepare_enable(sc->clk_io);
+#endif
 			host->flags &= ~SDHCI_DEVICE_DEAD;
 			host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION;
 		} else {
 			dev_dbg(&dev->dev, "card removed.\n");
 			host->flags |= SDHCI_DEVICE_DEAD;
 			host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION;
+#ifdef CONFIG_PM_RUNTIME
+			clk_disable_unprepare(sc->clk_io);
+#endif
 		}
 		tasklet_schedule(&host->card_tasklet);
 		spin_unlock_irqrestore(&host->lock, flags);
@@ -406,7 +417,7 @@
 	struct s3c_sdhci_platdata *pdata = sc->pdata;
 	struct device *dev = &sc->pdev->dev;
 
-	if (gpio_request(pdata->ext_cd_gpio, "SDHCI EXT CD") == 0) {
+	if (devm_gpio_request(dev, pdata->ext_cd_gpio, "SDHCI EXT CD") == 0) {
 		sc->ext_cd_gpio = pdata->ext_cd_gpio;
 		sc->ext_cd_irq = gpio_to_irq(pdata->ext_cd_gpio);
 		if (sc->ext_cd_irq &&
@@ -449,12 +460,12 @@
 		return -ENOMEM;
 
 	/* get the card detection method */
-	if (of_get_property(node, "broken-cd", 0)) {
+	if (of_get_property(node, "broken-cd", NULL)) {
 		pdata->cd_type = S3C_SDHCI_CD_NONE;
 		goto setup_bus;
 	}
 
-	if (of_get_property(node, "non-removable", 0)) {
+	if (of_get_property(node, "non-removable", NULL)) {
 		pdata->cd_type = S3C_SDHCI_CD_PERMANENT;
 		goto setup_bus;
 	}
@@ -477,8 +488,9 @@
 		return -EINVAL;
 	}
 
-	dev_info(dev, "assuming no card detect line available\n");
-	pdata->cd_type = S3C_SDHCI_CD_NONE;
+	/* assuming internal card detect that will be configured by pinctrl */
+	pdata->cd_type = S3C_SDHCI_CD_INTERNAL;
+	goto setup_bus;
 
  found_cd:
 	if (pdata->cd_type == S3C_SDHCI_CD_GPIO) {
@@ -487,7 +499,7 @@
 		if (of_get_property(node, "cd-inverted", NULL))
 			pdata->ext_cd_gpio_invert = 1;
 	} else if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
-		ret = gpio_request(gpio, "sdhci-cd");
+		ret = devm_gpio_request(dev, gpio, "sdhci-cd");
 		if (ret) {
 			dev_err(dev, "card detect gpio request failed\n");
 			return -EINVAL;
@@ -496,33 +508,28 @@
 	}
 
  setup_bus:
+	if (!IS_ERR(ourhost->pctrl))
+		return 0;
+
 	/* get the gpios for command, clock and data lines */
 	for (cnt = 0; cnt < NUM_GPIOS(pdata->max_width); cnt++) {
 		gpio = of_get_gpio(node, cnt);
 		if (!gpio_is_valid(gpio)) {
 			dev_err(dev, "invalid gpio[%d]\n", cnt);
-			goto err_free_dt_cd_gpio;
+			return -EINVAL;
 		}
 		ourhost->gpios[cnt] = gpio;
 	}
 
 	for (cnt = 0; cnt < NUM_GPIOS(pdata->max_width); cnt++) {
-		ret = gpio_request(ourhost->gpios[cnt], "sdhci-gpio");
+		ret = devm_gpio_request(dev, ourhost->gpios[cnt], "sdhci-gpio");
 		if (ret) {
 			dev_err(dev, "gpio[%d] request failed\n", cnt);
-			goto err_free_dt_gpios;
+			return -EINVAL;
 		}
 	}
 
 	return 0;
-
- err_free_dt_gpios:
-	while (--cnt >= 0)
-		gpio_free(ourhost->gpios[cnt]);
- err_free_dt_cd_gpio:
-	if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL)
-		gpio_free(ourhost->ext_cd_gpio);
-	return -EINVAL;
 }
 #else
 static int sdhci_s3c_parse_dt(struct device *dev,
@@ -579,13 +586,15 @@
 	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
 	if (!pdata) {
 		ret = -ENOMEM;
-		goto err_pdata;
+		goto err_pdata_io_clk;
 	}
 
+	sc->pctrl = devm_pinctrl_get_select_default(&pdev->dev);
+
 	if (pdev->dev.of_node) {
 		ret = sdhci_s3c_parse_dt(&pdev->dev, host, pdata);
 		if (ret)
-			goto err_pdata;
+			goto err_pdata_io_clk;
 	} else {
 		memcpy(pdata, pdev->dev.platform_data, sizeof(*pdata));
 		sc->ext_cd_gpio = -1; /* invalid gpio number */
@@ -603,7 +612,7 @@
 	if (IS_ERR(sc->clk_io)) {
 		dev_err(dev, "failed to get io clock\n");
 		ret = PTR_ERR(sc->clk_io);
-		goto err_io_clk;
+		goto err_pdata_io_clk;
 	}
 
 	/* enable the local io clock and keep it running for the moment. */
@@ -766,13 +775,7 @@
 	clk_disable_unprepare(sc->clk_io);
 	clk_put(sc->clk_io);
 
- err_io_clk:
-	for (ptr = 0; ptr < NUM_GPIOS(sc->pdata->max_width); ptr++)
-		gpio_free(sc->gpios[ptr]);
-	if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL)
-		gpio_free(sc->ext_cd_gpio);
-
- err_pdata:
+ err_pdata_io_clk:
 	sdhci_free_host(host);
 
 	return ret;
@@ -791,9 +794,6 @@
 	if (sc->ext_cd_irq)
 		free_irq(sc->ext_cd_irq, sc);
 
-	if (gpio_is_valid(sc->ext_cd_gpio))
-		gpio_free(sc->ext_cd_gpio);
-
 #ifdef CONFIG_PM_RUNTIME
 	if (pdata->cd_type != S3C_SDHCI_CD_INTERNAL)
 		clk_prepare_enable(sc->clk_io);
@@ -814,11 +814,6 @@
 	clk_disable_unprepare(sc->clk_io);
 	clk_put(sc->clk_io);
 
-	if (pdev->dev.of_node) {
-		for (ptr = 0; ptr < NUM_GPIOS(sc->pdata->max_width); ptr++)
-			gpio_free(sc->gpios[ptr]);
-	}
-
 	sdhci_free_host(host);
 	platform_set_drvdata(pdev, NULL);
 
diff --git a/drivers/mmc/host/sdhci-spear.c b/drivers/mmc/host/sdhci-spear.c
index df2379a..c6ece0b 100644
--- a/drivers/mmc/host/sdhci-spear.c
+++ b/drivers/mmc/host/sdhci-spear.c
@@ -144,6 +144,11 @@
 		goto put_clk;
 	}
 
+	ret = clk_set_rate(sdhci->clk, 50000000);
+	if (ret)
+		dev_dbg(&pdev->dev, "Error setting desired clk, clk=%lu\n",
+				clk_get_rate(sdhci->clk));
+
 	if (np) {
 		sdhci->data = sdhci_probe_config_dt(pdev);
 		if (IS_ERR(sdhci->data)) {
@@ -295,7 +300,7 @@
 
 	ret = sdhci_suspend_host(host);
 	if (!ret)
-		clk_disable_unprepare(sdhci->clk);
+		clk_disable(sdhci->clk);
 
 	return ret;
 }
@@ -306,7 +311,7 @@
 	struct spear_sdhci *sdhci = dev_get_platdata(dev);
 	int ret;
 
-	ret = clk_prepare_enable(sdhci->clk);
+	ret = clk_enable(sdhci->clk);
 	if (ret) {
 		dev_dbg(dev, "Resume: Error enabling clock\n");
 		return ret;
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index c7851c0..6f0bfc0 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1618,7 +1618,7 @@
 	sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
 
 	if (host->vqmmc) {
-		ret = regulator_set_voltage(host->vqmmc, 3300000, 3300000);
+		ret = regulator_set_voltage(host->vqmmc, 2700000, 3600000);
 		if (ret) {
 			pr_warning("%s: Switching to 3.3V signalling voltage "
 				   " failed\n", mmc_hostname(host->mmc));
@@ -1662,7 +1662,7 @@
 		 */
 		if (host->vqmmc)
 			ret = regulator_set_voltage(host->vqmmc,
-				1800000, 1800000);
+				1700000, 1950000);
 		else
 			ret = 0;
 
@@ -1994,30 +1994,11 @@
 	sdhci_runtime_pm_put(host);
 }
 
-static const struct mmc_host_ops sdhci_ops = {
-	.request	= sdhci_request,
-	.set_ios	= sdhci_set_ios,
-	.get_ro		= sdhci_get_ro,
-	.hw_reset	= sdhci_hw_reset,
-	.enable_sdio_irq = sdhci_enable_sdio_irq,
-	.start_signal_voltage_switch	= sdhci_start_signal_voltage_switch,
-	.execute_tuning			= sdhci_execute_tuning,
-	.enable_preset_value		= sdhci_enable_preset_value,
-};
-
-/*****************************************************************************\
- *                                                                           *
- * Tasklets                                                                  *
- *                                                                           *
-\*****************************************************************************/
-
-static void sdhci_tasklet_card(unsigned long param)
+static void sdhci_card_event(struct mmc_host *mmc)
 {
-	struct sdhci_host *host;
+	struct sdhci_host *host = mmc_priv(mmc);
 	unsigned long flags;
 
-	host = (struct sdhci_host*)param;
-
 	spin_lock_irqsave(&host->lock, flags);
 
 	/* Check host->mrq first in case we are runtime suspended */
@@ -2036,6 +2017,31 @@
 	}
 
 	spin_unlock_irqrestore(&host->lock, flags);
+}
+
+static const struct mmc_host_ops sdhci_ops = {
+	.request	= sdhci_request,
+	.set_ios	= sdhci_set_ios,
+	.get_ro		= sdhci_get_ro,
+	.hw_reset	= sdhci_hw_reset,
+	.enable_sdio_irq = sdhci_enable_sdio_irq,
+	.start_signal_voltage_switch	= sdhci_start_signal_voltage_switch,
+	.execute_tuning			= sdhci_execute_tuning,
+	.enable_preset_value		= sdhci_enable_preset_value,
+	.card_event			= sdhci_card_event,
+};
+
+/*****************************************************************************\
+ *                                                                           *
+ * Tasklets                                                                  *
+ *                                                                           *
+\*****************************************************************************/
+
+static void sdhci_tasklet_card(unsigned long param)
+{
+	struct sdhci_host *host = (struct sdhci_host*)param;
+
+	sdhci_card_event(host->mmc);
 
 	mmc_detect_change(host->mmc, msecs_to_jiffies(200));
 }
@@ -2282,6 +2288,8 @@
 		pr_err("%s: ADMA error\n", mmc_hostname(host->mmc));
 		sdhci_show_adma_error(host);
 		host->data->error = -EIO;
+		if (host->ops->adma_workaround)
+			host->ops->adma_workaround(host, intmask);
 	}
 
 	if (host->data->error)
@@ -2858,10 +2866,16 @@
 				mmc_hostname(mmc));
 			host->vqmmc = NULL;
 		}
-	}
-	else if (regulator_is_supported_voltage(host->vqmmc, 1800000, 1800000))
+	} else {
 		regulator_enable(host->vqmmc);
-	else
+		if (!regulator_is_supported_voltage(host->vqmmc, 1700000,
+			1950000))
+			caps[1] &= ~(SDHCI_SUPPORT_SDR104 |
+					SDHCI_SUPPORT_SDR50 |
+					SDHCI_SUPPORT_DDR50);
+	}
+
+	if (host->quirks2 & SDHCI_QUIRK2_NO_1_8_V)
 		caps[1] &= ~(SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_SDR50 |
 		       SDHCI_SUPPORT_DDR50);
 
@@ -2919,21 +2933,18 @@
 				mmc_hostname(mmc));
 			host->vmmc = NULL;
 		}
-	} else
-		regulator_enable(host->vmmc);
+	}
 
 #ifdef CONFIG_REGULATOR
 	if (host->vmmc) {
-		ret = regulator_is_supported_voltage(host->vmmc, 3300000,
-			3300000);
+		ret = regulator_is_supported_voltage(host->vmmc, 2700000,
+			3600000);
 		if ((ret <= 0) || (!(caps[0] & SDHCI_CAN_VDD_330)))
 			caps[0] &= ~SDHCI_CAN_VDD_330;
-		ret = regulator_is_supported_voltage(host->vmmc, 3000000,
-			3000000);
 		if ((ret <= 0) || (!(caps[0] & SDHCI_CAN_VDD_300)))
 			caps[0] &= ~SDHCI_CAN_VDD_300;
-		ret = regulator_is_supported_voltage(host->vmmc, 1800000,
-			1800000);
+		ret = regulator_is_supported_voltage(host->vmmc, 1700000,
+			1950000);
 		if ((ret <= 0) || (!(caps[0] & SDHCI_CAN_VDD_180)))
 			caps[0] &= ~SDHCI_CAN_VDD_180;
 	}
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 71a4a7ed..a6d69b7 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -120,6 +120,7 @@
 #define SDHCI_SIGNAL_ENABLE	0x38
 #define  SDHCI_INT_RESPONSE	0x00000001
 #define  SDHCI_INT_DATA_END	0x00000002
+#define  SDHCI_INT_BLK_GAP	0x00000004
 #define  SDHCI_INT_DMA_END	0x00000008
 #define  SDHCI_INT_SPACE_AVAIL	0x00000010
 #define  SDHCI_INT_DATA_AVAIL	0x00000020
@@ -146,7 +147,8 @@
 #define  SDHCI_INT_DATA_MASK	(SDHCI_INT_DATA_END | SDHCI_INT_DMA_END | \
 		SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL | \
 		SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_DATA_CRC | \
-		SDHCI_INT_DATA_END_BIT | SDHCI_INT_ADMA_ERROR)
+		SDHCI_INT_DATA_END_BIT | SDHCI_INT_ADMA_ERROR | \
+		SDHCI_INT_BLK_GAP)
 #define SDHCI_INT_ALL_MASK	((unsigned int)-1)
 
 #define SDHCI_ACMD12_ERR	0x3C
@@ -278,6 +280,7 @@
 	void	(*hw_reset)(struct sdhci_host *host);
 	void	(*platform_suspend)(struct sdhci_host *host);
 	void	(*platform_resume)(struct sdhci_host *host);
+	void    (*adma_workaround)(struct sdhci_host *host, u32 intmask);
 	void	(*platform_init)(struct sdhci_host *host);
 };
 
diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c
index 9b8efac..9a4c151 100644
--- a/drivers/mmc/host/sh_mmcif.c
+++ b/drivers/mmc/host/sh_mmcif.c
@@ -1104,7 +1104,6 @@
 {
 	struct sh_mmcif_host *host = dev_id;
 	struct mmc_request *mrq = host->mrq;
-	struct mmc_data *data = mrq->data;
 
 	cancel_delayed_work_sync(&host->timeout_work);
 
@@ -1152,13 +1151,14 @@
 	case MMCIF_WAIT_FOR_READ_END:
 	case MMCIF_WAIT_FOR_WRITE_END:
 		if (host->sd_error)
-			data->error = sh_mmcif_error_manage(host);
+			mrq->data->error = sh_mmcif_error_manage(host);
 		break;
 	default:
 		BUG();
 	}
 
 	if (host->wait_for != MMCIF_WAIT_FOR_STOP) {
+		struct mmc_data *data = mrq->data;
 		if (!mrq->cmd->error && data && !data->error)
 			data->bytes_xfered =
 				data->blocks * data->blksz;
@@ -1231,10 +1231,6 @@
 		host->sd_error = true;
 		dev_dbg(&host->pd->dev, "int err state = %08x\n", state);
 	}
-	if (host->state == STATE_IDLE) {
-		dev_info(&host->pd->dev, "Spurious IRQ status 0x%x", state);
-		return IRQ_HANDLED;
-	}
 	if (state & ~(INT_CMD12RBE | INT_CMD12CRE)) {
 		if (!host->dma_active)
 			return IRQ_WAKE_THREAD;
@@ -1310,7 +1306,6 @@
 	struct sh_mmcif_plat_data *pd = pdev->dev.platform_data;
 	struct resource *res;
 	void __iomem *reg;
-	char clk_name[8];
 
 	irq[0] = platform_get_irq(pdev, 0);
 	irq[1] = platform_get_irq(pdev, 1);
@@ -1360,11 +1355,10 @@
 	pm_runtime_enable(&pdev->dev);
 	host->power = false;
 
-	snprintf(clk_name, sizeof(clk_name), "mmc%d", pdev->id);
-	host->hclk = clk_get(&pdev->dev, clk_name);
+	host->hclk = clk_get(&pdev->dev, NULL);
 	if (IS_ERR(host->hclk)) {
 		ret = PTR_ERR(host->hclk);
-		dev_err(&pdev->dev, "cannot get clock \"%s\": %d\n", clk_name, ret);
+		dev_err(&pdev->dev, "cannot get clock: %d\n", ret);
 		goto eclkget;
 	}
 	ret = sh_mmcif_clk_update(host);
diff --git a/drivers/mmc/host/sh_mobile_sdhi.c b/drivers/mmc/host/sh_mobile_sdhi.c
index 9125684..524a7f7 100644
--- a/drivers/mmc/host/sh_mobile_sdhi.c
+++ b/drivers/mmc/host/sh_mobile_sdhi.c
@@ -123,7 +123,6 @@
 	struct tmio_mmc_data *mmc_data;
 	struct sh_mobile_sdhi_info *p = pdev->dev.platform_data;
 	struct tmio_mmc_host *host;
-	char clk_name[8];
 	int irq, ret, i = 0;
 	bool multiplexed_isr = true;
 
@@ -144,11 +143,10 @@
 		}
 	}
 
-	snprintf(clk_name, sizeof(clk_name), "sdhi%d", pdev->id);
-	priv->clk = clk_get(&pdev->dev, clk_name);
+	priv->clk = clk_get(&pdev->dev, NULL);
 	if (IS_ERR(priv->clk)) {
-		dev_err(&pdev->dev, "cannot get clock \"%s\"\n", clk_name);
 		ret = PTR_ERR(priv->clk);
+		dev_err(&pdev->dev, "cannot get clock: %d\n", ret);
 		goto eclkget;
 	}
 
@@ -250,7 +248,7 @@
 	dev_info(&pdev->dev, "%s base at 0x%08lx clock rate %u MHz\n",
 		 mmc_hostname(host->mmc), (unsigned long)
 		 (platform_get_resource(pdev, IORESOURCE_MEM, 0)->start),
-		 mmc_data->hclk / 1000000);
+		 host->mmc->f_max / 1000000);
 
 	return ret;
 
diff --git a/drivers/mmc/host/vub300.c b/drivers/mmc/host/vub300.c
index d5655a6..cb9f361 100644
--- a/drivers/mmc/host/vub300.c
+++ b/drivers/mmc/host/vub300.c
@@ -2362,6 +2362,7 @@
 error1:
 	usb_free_urb(command_out_urb);
 error0:
+	usb_put_dev(udev);
 	return retval;
 }
 
diff --git a/drivers/mmc/host/wmt-sdmmc.c b/drivers/mmc/host/wmt-sdmmc.c
new file mode 100644
index 0000000..5ba4605
--- /dev/null
+++ b/drivers/mmc/host/wmt-sdmmc.c
@@ -0,0 +1,1029 @@
+/*
+ *  WM8505/WM8650 SD/MMC Host Controller
+ *
+ *  Copyright (C) 2010 Tony Prisk
+ *  Copyright (C) 2008 WonderMedia Technologies, Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/ioport.h>
+#include <linux/errno.h>
+#include <linux/dma-mapping.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_device.h>
+
+#include <linux/mmc/host.h>
+#include <linux/mmc/mmc.h>
+#include <linux/mmc/sd.h>
+
+#include <asm/byteorder.h>
+
+
+#define DRIVER_NAME "wmt-sdhc"
+
+
+/* MMC/SD controller registers */
+#define SDMMC_CTLR			0x00
+#define SDMMC_CMD			0x01
+#define SDMMC_RSPTYPE			0x02
+#define SDMMC_ARG			0x04
+#define SDMMC_BUSMODE			0x08
+#define SDMMC_BLKLEN			0x0C
+#define SDMMC_BLKCNT			0x0E
+#define SDMMC_RSP			0x10
+#define SDMMC_CBCR			0x20
+#define SDMMC_INTMASK0			0x24
+#define SDMMC_INTMASK1			0x25
+#define SDMMC_STS0			0x28
+#define SDMMC_STS1			0x29
+#define SDMMC_STS2			0x2A
+#define SDMMC_STS3			0x2B
+#define SDMMC_RSPTIMEOUT		0x2C
+#define SDMMC_CLK			0x30	/* VT8500 only */
+#define SDMMC_EXTCTRL			0x34
+#define SDMMC_SBLKLEN			0x38
+#define SDMMC_DMATIMEOUT		0x3C
+
+
+/* SDMMC_CTLR bit fields */
+#define CTLR_CMD_START			0x01
+#define CTLR_CMD_WRITE			0x04
+#define CTLR_FIFO_RESET			0x08
+
+/* SDMMC_BUSMODE bit fields */
+#define BM_SPI_MODE			0x01
+#define BM_FOURBIT_MODE			0x02
+#define BM_EIGHTBIT_MODE		0x04
+#define BM_SD_OFF			0x10
+#define BM_SPI_CS			0x20
+#define BM_SD_POWER			0x40
+#define BM_SOFT_RESET			0x80
+#define BM_ONEBIT_MASK			0xFD
+
+/* SDMMC_BLKLEN bit fields */
+#define BLKL_CRCERR_ABORT		0x0800
+#define BLKL_CD_POL_HIGH		0x1000
+#define BLKL_GPI_CD			0x2000
+#define BLKL_DATA3_CD			0x4000
+#define BLKL_INT_ENABLE			0x8000
+
+/* SDMMC_INTMASK0 bit fields */
+#define INT0_MBLK_TRAN_DONE_INT_EN	0x10
+#define INT0_BLK_TRAN_DONE_INT_EN	0x20
+#define INT0_CD_INT_EN			0x40
+#define INT0_DI_INT_EN			0x80
+
+/* SDMMC_INTMASK1 bit fields */
+#define INT1_CMD_RES_TRAN_DONE_INT_EN	0x02
+#define INT1_CMD_RES_TOUT_INT_EN	0x04
+#define INT1_MBLK_AUTO_STOP_INT_EN	0x08
+#define INT1_DATA_TOUT_INT_EN		0x10
+#define INT1_RESCRC_ERR_INT_EN		0x20
+#define INT1_RCRC_ERR_INT_EN		0x40
+#define INT1_WCRC_ERR_INT_EN		0x80
+
+/* SDMMC_STS0 bit fields */
+#define STS0_WRITE_PROTECT		0x02
+#define STS0_CD_DATA3			0x04
+#define STS0_CD_GPI			0x08
+#define STS0_MBLK_DONE			0x10
+#define STS0_BLK_DONE			0x20
+#define STS0_CARD_DETECT		0x40
+#define STS0_DEVICE_INS			0x80
+
+/* SDMMC_STS1 bit fields */
+#define STS1_SDIO_INT			0x01
+#define STS1_CMDRSP_DONE		0x02
+#define STS1_RSP_TIMEOUT		0x04
+#define STS1_AUTOSTOP_DONE		0x08
+#define STS1_DATA_TIMEOUT		0x10
+#define STS1_RSP_CRC_ERR		0x20
+#define STS1_RCRC_ERR			0x40
+#define STS1_WCRC_ERR			0x80
+
+/* SDMMC_STS2 bit fields */
+#define STS2_CMD_RES_BUSY		0x10
+#define STS2_DATARSP_BUSY		0x20
+#define STS2_DIS_FORCECLK		0x80
+
+
+/* MMC/SD DMA Controller Registers */
+#define SDDMA_GCR			0x100
+#define SDDMA_IER			0x104
+#define SDDMA_ISR			0x108
+#define SDDMA_DESPR			0x10C
+#define SDDMA_RBR			0x110
+#define SDDMA_DAR			0x114
+#define SDDMA_BAR			0x118
+#define SDDMA_CPR			0x11C
+#define SDDMA_CCR			0x120
+
+
+/* SDDMA_GCR bit fields */
+#define DMA_GCR_DMA_EN			0x00000001
+#define DMA_GCR_SOFT_RESET		0x00000100
+
+/* SDDMA_IER bit fields */
+#define DMA_IER_INT_EN			0x00000001
+
+/* SDDMA_ISR bit fields */
+#define DMA_ISR_INT_STS			0x00000001
+
+/* SDDMA_RBR bit fields */
+#define DMA_RBR_FORMAT			0x40000000
+#define DMA_RBR_END			0x80000000
+
+/* SDDMA_CCR bit fields */
+#define DMA_CCR_RUN			0x00000080
+#define DMA_CCR_IF_TO_PERIPHERAL	0x00000000
+#define DMA_CCR_PERIPHERAL_TO_IF	0x00400000
+
+/* SDDMA_CCR event status */
+#define DMA_CCR_EVT_NO_STATUS		0x00000000
+#define DMA_CCR_EVT_UNDERRUN		0x00000001
+#define DMA_CCR_EVT_OVERRUN		0x00000002
+#define DMA_CCR_EVT_DESP_READ		0x00000003
+#define DMA_CCR_EVT_DATA_RW		0x00000004
+#define DMA_CCR_EVT_EARLY_END		0x00000005
+#define DMA_CCR_EVT_SUCCESS		0x0000000F
+
+#define PDMA_READ			0x00
+#define PDMA_WRITE			0x01
+
+#define WMT_SD_POWER_OFF		0
+#define WMT_SD_POWER_ON			1
+
+struct wmt_dma_descriptor {
+	u32 flags;
+	u32 data_buffer_addr;
+	u32 branch_addr;
+	u32 reserved1;
+};
+
+struct wmt_mci_caps {
+	unsigned int	f_min;
+	unsigned int	f_max;
+	u32		ocr_avail;
+	u32		caps;
+	u32		max_seg_size;
+	u32		max_segs;
+	u32		max_blk_size;
+};
+
+struct wmt_mci_priv {
+	struct mmc_host *mmc;
+	void __iomem *sdmmc_base;
+
+	int irq_regular;
+	int irq_dma;
+
+	void *dma_desc_buffer;
+	dma_addr_t dma_desc_device_addr;
+
+	struct completion cmdcomp;
+	struct completion datacomp;
+
+	struct completion *comp_cmd;
+	struct completion *comp_dma;
+
+	struct mmc_request *req;
+	struct mmc_command *cmd;
+
+	struct clk *clk_sdmmc;
+	struct device *dev;
+
+	u8 power_inverted;
+	u8 cd_inverted;
+};
+
+static void wmt_set_sd_power(struct wmt_mci_priv *priv, int enable)
+{
+	u32 reg_tmp;
+	if (enable) {
+		if (priv->power_inverted) {
+			reg_tmp = readb(priv->sdmmc_base + SDMMC_BUSMODE);
+			writeb(reg_tmp | BM_SD_OFF,
+			       priv->sdmmc_base + SDMMC_BUSMODE);
+		} else {
+			reg_tmp = readb(priv->sdmmc_base + SDMMC_BUSMODE);
+			writeb(reg_tmp & (~BM_SD_OFF),
+			       priv->sdmmc_base + SDMMC_BUSMODE);
+		}
+	} else {
+		if (priv->power_inverted) {
+			reg_tmp = readb(priv->sdmmc_base + SDMMC_BUSMODE);
+			writeb(reg_tmp & (~BM_SD_OFF),
+			       priv->sdmmc_base + SDMMC_BUSMODE);
+		} else {
+			reg_tmp = readb(priv->sdmmc_base + SDMMC_BUSMODE);
+			writeb(reg_tmp | BM_SD_OFF,
+			       priv->sdmmc_base + SDMMC_BUSMODE);
+		}
+	}
+}
+
+static void wmt_mci_read_response(struct mmc_host *mmc)
+{
+	struct wmt_mci_priv *priv;
+	int idx1, idx2;
+	u8 tmp_resp;
+	u32 response;
+
+	priv = mmc_priv(mmc);
+
+	for (idx1 = 0; idx1 < 4; idx1++) {
+		response = 0;
+		for (idx2 = 0; idx2 < 4; idx2++) {
+			if ((idx1 == 3) && (idx2 == 3))
+				tmp_resp = readb(priv->sdmmc_base + SDMMC_RSP);
+			else
+				tmp_resp = readb(priv->sdmmc_base + SDMMC_RSP +
+						 (idx1*4) + idx2 + 1);
+			response |= (tmp_resp << (idx2 * 8));
+		}
+		priv->cmd->resp[idx1] = cpu_to_be32(response);
+	}
+}
+
+static void wmt_mci_start_command(struct wmt_mci_priv *priv)
+{
+	u32 reg_tmp;
+
+	reg_tmp = readb(priv->sdmmc_base + SDMMC_CTLR);
+	writeb(reg_tmp | CTLR_CMD_START, priv->sdmmc_base + SDMMC_CTLR);
+}
+
+static int wmt_mci_send_command(struct mmc_host *mmc, u8 command, u8 cmdtype,
+				u32 arg, u8 rsptype)
+{
+	struct wmt_mci_priv *priv;
+	u32 reg_tmp;
+
+	priv = mmc_priv(mmc);
+
+	/* write command, arg, resptype registers */
+	writeb(command, priv->sdmmc_base + SDMMC_CMD);
+	writel(arg, priv->sdmmc_base + SDMMC_ARG);
+	writeb(rsptype, priv->sdmmc_base + SDMMC_RSPTYPE);
+
+	/* reset response FIFO */
+	reg_tmp = readb(priv->sdmmc_base + SDMMC_CTLR);
+	writeb(reg_tmp | CTLR_FIFO_RESET, priv->sdmmc_base + SDMMC_CTLR);
+
+	/* ensure clock enabled - VT3465 */
+	wmt_set_sd_power(priv, WMT_SD_POWER_ON);
+
+	/* clear status bits */
+	writeb(0xFF, priv->sdmmc_base + SDMMC_STS0);
+	writeb(0xFF, priv->sdmmc_base + SDMMC_STS1);
+	writeb(0xFF, priv->sdmmc_base + SDMMC_STS2);
+	writeb(0xFF, priv->sdmmc_base + SDMMC_STS3);
+
+	/* set command type */
+	reg_tmp = readb(priv->sdmmc_base + SDMMC_CTLR);
+	writeb((reg_tmp & 0x0F) | (cmdtype << 4),
+	       priv->sdmmc_base + SDMMC_CTLR);
+
+	return 0;
+}
+
+static void wmt_mci_disable_dma(struct wmt_mci_priv *priv)
+{
+	writel(DMA_ISR_INT_STS, priv->sdmmc_base + SDDMA_ISR);
+	writel(0, priv->sdmmc_base + SDDMA_IER);
+}
+
+static void wmt_complete_data_request(struct wmt_mci_priv *priv)
+{
+	struct mmc_request *req;
+	req = priv->req;
+
+	req->data->bytes_xfered = req->data->blksz * req->data->blocks;
+
+	/* unmap the DMA pages used for write data */
+	if (req->data->flags & MMC_DATA_WRITE)
+		dma_unmap_sg(mmc_dev(priv->mmc), req->data->sg,
+			     req->data->sg_len, DMA_TO_DEVICE);
+	else
+		dma_unmap_sg(mmc_dev(priv->mmc), req->data->sg,
+			     req->data->sg_len, DMA_FROM_DEVICE);
+
+	/* Check if the DMA ISR returned a data error */
+	if ((req->cmd->error) || (req->data->error))
+		mmc_request_done(priv->mmc, req);
+	else {
+		wmt_mci_read_response(priv->mmc);
+		if (!req->data->stop) {
+			/* single-block read/write requests end here */
+			mmc_request_done(priv->mmc, req);
+		} else {
+			/*
+			 * we change the priv->cmd variable so the response is
+			 * stored in the stop struct rather than the original
+			 * calling command struct
+			 */
+			priv->comp_cmd = &priv->cmdcomp;
+			init_completion(priv->comp_cmd);
+			priv->cmd = req->data->stop;
+			wmt_mci_send_command(priv->mmc, req->data->stop->opcode,
+					     7, req->data->stop->arg, 9);
+			wmt_mci_start_command(priv);
+		}
+	}
+}
+
+static irqreturn_t wmt_mci_dma_isr(int irq_num, void *data)
+{
+	struct mmc_host *mmc;
+	struct wmt_mci_priv *priv;
+
+	int status;
+
+	priv = (struct wmt_mci_priv *)data;
+	mmc = priv->mmc;
+
+	status = readl(priv->sdmmc_base + SDDMA_CCR) & 0x0F;
+
+	if (status != DMA_CCR_EVT_SUCCESS) {
+		dev_err(priv->dev, "DMA Error: Status = %d\n", status);
+		priv->req->data->error = -ETIMEDOUT;
+		complete(priv->comp_dma);
+		return IRQ_HANDLED;
+	}
+
+	priv->req->data->error = 0;
+
+	wmt_mci_disable_dma(priv);
+
+	complete(priv->comp_dma);
+
+	if (priv->comp_cmd) {
+		if (completion_done(priv->comp_cmd)) {
+			/*
+			 * if the command (regular) interrupt has already
+			 * completed, finish off the request otherwise we wait
+			 * for the command interrupt and finish from there.
+			 */
+			wmt_complete_data_request(priv);
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t wmt_mci_regular_isr(int irq_num, void *data)
+{
+	struct wmt_mci_priv *priv;
+	u32 status0;
+	u32 status1;
+	u32 status2;
+	u32 reg_tmp;
+	int cmd_done;
+
+	priv = (struct wmt_mci_priv *)data;
+	cmd_done = 0;
+	status0 = readb(priv->sdmmc_base + SDMMC_STS0);
+	status1 = readb(priv->sdmmc_base + SDMMC_STS1);
+	status2 = readb(priv->sdmmc_base + SDMMC_STS2);
+
+	/* Check for card insertion */
+	reg_tmp = readb(priv->sdmmc_base + SDMMC_INTMASK0);
+	if ((reg_tmp & INT0_DI_INT_EN) && (status0 & STS0_DEVICE_INS)) {
+		mmc_detect_change(priv->mmc, 0);
+		if (priv->cmd)
+			priv->cmd->error = -ETIMEDOUT;
+		if (priv->comp_cmd)
+			complete(priv->comp_cmd);
+		if (priv->comp_dma) {
+			wmt_mci_disable_dma(priv);
+			complete(priv->comp_dma);
+		}
+		writeb(STS0_DEVICE_INS, priv->sdmmc_base + SDMMC_STS0);
+		return IRQ_HANDLED;
+	}
+
+	if ((!priv->req->data) ||
+	    ((priv->req->data->stop) && (priv->cmd == priv->req->data->stop))) {
+		/* handle non-data & stop_transmission requests */
+		if (status1 & STS1_CMDRSP_DONE) {
+			priv->cmd->error = 0;
+			cmd_done = 1;
+		} else if ((status1 & STS1_RSP_TIMEOUT) ||
+			   (status1 & STS1_DATA_TIMEOUT)) {
+			priv->cmd->error = -ETIMEDOUT;
+			cmd_done = 1;
+		}
+
+		if (cmd_done) {
+			priv->comp_cmd = NULL;
+
+			if (!priv->cmd->error)
+				wmt_mci_read_response(priv->mmc);
+
+			priv->cmd = NULL;
+
+			mmc_request_done(priv->mmc, priv->req);
+		}
+	} else {
+		/* handle data requests */
+		if (status1 & STS1_CMDRSP_DONE) {
+			if (priv->cmd)
+				priv->cmd->error = 0;
+			if (priv->comp_cmd)
+				complete(priv->comp_cmd);
+		}
+
+		if ((status1 & STS1_RSP_TIMEOUT) ||
+		    (status1 & STS1_DATA_TIMEOUT)) {
+			if (priv->cmd)
+				priv->cmd->error = -ETIMEDOUT;
+			if (priv->comp_cmd)
+				complete(priv->comp_cmd);
+			if (priv->comp_dma) {
+				wmt_mci_disable_dma(priv);
+				complete(priv->comp_dma);
+			}
+		}
+
+		if (priv->comp_dma) {
+			/*
+			 * If the dma interrupt has already completed, finish
+			 * off the request; otherwise we wait for the DMA
+			 * interrupt and finish from there.
+			 */
+			if (completion_done(priv->comp_dma))
+				wmt_complete_data_request(priv);
+		}
+	}
+
+	writeb(status0, priv->sdmmc_base + SDMMC_STS0);
+	writeb(status1, priv->sdmmc_base + SDMMC_STS1);
+	writeb(status2, priv->sdmmc_base + SDMMC_STS2);
+
+	return IRQ_HANDLED;
+}
+
+static void wmt_reset_hardware(struct mmc_host *mmc)
+{
+	struct wmt_mci_priv *priv;
+	u32 reg_tmp;
+
+	priv = mmc_priv(mmc);
+
+	/* reset controller */
+	reg_tmp = readb(priv->sdmmc_base + SDMMC_BUSMODE);
+	writeb(reg_tmp | BM_SOFT_RESET, priv->sdmmc_base + SDMMC_BUSMODE);
+
+	/* reset response FIFO */
+	reg_tmp = readb(priv->sdmmc_base + SDMMC_CTLR);
+	writeb(reg_tmp | CTLR_FIFO_RESET, priv->sdmmc_base + SDMMC_CTLR);
+
+	/* enable GPI pin to detect card */
+	writew(BLKL_INT_ENABLE | BLKL_GPI_CD, priv->sdmmc_base + SDMMC_BLKLEN);
+
+	/* clear interrupt status */
+	writeb(0xFF, priv->sdmmc_base + SDMMC_STS0);
+	writeb(0xFF, priv->sdmmc_base + SDMMC_STS1);
+
+	/* setup interrupts */
+	writeb(INT0_CD_INT_EN | INT0_DI_INT_EN, priv->sdmmc_base +
+	       SDMMC_INTMASK0);
+	writeb(INT1_DATA_TOUT_INT_EN | INT1_CMD_RES_TRAN_DONE_INT_EN |
+	       INT1_CMD_RES_TOUT_INT_EN, priv->sdmmc_base + SDMMC_INTMASK1);
+
+	/* set the DMA timeout */
+	writew(8191, priv->sdmmc_base + SDMMC_DMATIMEOUT);
+
+	/* auto clock freezing enable */
+	reg_tmp = readb(priv->sdmmc_base + SDMMC_STS2);
+	writeb(reg_tmp | STS2_DIS_FORCECLK, priv->sdmmc_base + SDMMC_STS2);
+
+	/* set a default clock speed of 400Khz */
+	clk_set_rate(priv->clk_sdmmc, 400000);
+}
+
+static int wmt_dma_init(struct mmc_host *mmc)
+{
+	struct wmt_mci_priv *priv;
+
+	priv = mmc_priv(mmc);
+
+	writel(DMA_GCR_SOFT_RESET, priv->sdmmc_base + SDDMA_GCR);
+	writel(DMA_GCR_DMA_EN, priv->sdmmc_base + SDDMA_GCR);
+	if ((readl(priv->sdmmc_base + SDDMA_GCR) & DMA_GCR_DMA_EN) != 0)
+		return 0;
+	else
+		return 1;
+}
+
+static void wmt_dma_init_descriptor(struct wmt_dma_descriptor *desc,
+		u16 req_count, u32 buffer_addr, u32 branch_addr, int end)
+{
+	desc->flags = 0x40000000 | req_count;
+	if (end)
+		desc->flags |= 0x80000000;
+	desc->data_buffer_addr = buffer_addr;
+	desc->branch_addr = branch_addr;
+}
+
+static void wmt_dma_config(struct mmc_host *mmc, u32 descaddr, u8 dir)
+{
+	struct wmt_mci_priv *priv;
+	u32 reg_tmp;
+
+	priv = mmc_priv(mmc);
+
+	/* Enable DMA Interrupts */
+	writel(DMA_IER_INT_EN, priv->sdmmc_base + SDDMA_IER);
+
+	/* Write DMA Descriptor Pointer Register */
+	writel(descaddr, priv->sdmmc_base + SDDMA_DESPR);
+
+	writel(0x00, priv->sdmmc_base + SDDMA_CCR);
+
+	if (dir == PDMA_WRITE) {
+		reg_tmp = readl(priv->sdmmc_base + SDDMA_CCR);
+		writel(reg_tmp & DMA_CCR_IF_TO_PERIPHERAL, priv->sdmmc_base +
+		       SDDMA_CCR);
+	} else {
+		reg_tmp = readl(priv->sdmmc_base + SDDMA_CCR);
+		writel(reg_tmp | DMA_CCR_PERIPHERAL_TO_IF, priv->sdmmc_base +
+		       SDDMA_CCR);
+	}
+}
+
+static void wmt_dma_start(struct wmt_mci_priv *priv)
+{
+	u32 reg_tmp;
+
+	reg_tmp = readl(priv->sdmmc_base + SDDMA_CCR);
+	writel(reg_tmp | DMA_CCR_RUN, priv->sdmmc_base + SDDMA_CCR);
+}
+
+static void wmt_mci_request(struct mmc_host *mmc, struct mmc_request *req)
+{
+	struct wmt_mci_priv *priv;
+	struct wmt_dma_descriptor *desc;
+	u8 command;
+	u8 cmdtype;
+	u32 arg;
+	u8 rsptype;
+	u32 reg_tmp;
+
+	struct scatterlist *sg;
+	int i;
+	int sg_cnt;
+	int offset;
+	u32 dma_address;
+	int desc_cnt;
+
+	priv = mmc_priv(mmc);
+	priv->req = req;
+
+	/*
+	 * Use the cmd variable to pass a pointer to the resp[] structure
+	 * This is required on multi-block requests to pass the pointer to the
+	 * stop command
+	 */
+	priv->cmd = req->cmd;
+
+	command = req->cmd->opcode;
+	arg = req->cmd->arg;
+	rsptype = mmc_resp_type(req->cmd);
+	cmdtype = 0;
+
+	/* rsptype=7 only valid for SPI commands - should be =2 for SD */
+	if (rsptype == 7)
+		rsptype = 2;
+	/* rsptype=21 is R1B, convert for controller */
+	if (rsptype == 21)
+		rsptype = 9;
+
+	if (!req->data) {
+		wmt_mci_send_command(mmc, command, cmdtype, arg, rsptype);
+		wmt_mci_start_command(priv);
+		/* completion is now handled in the regular_isr() */
+	}
+	if (req->data) {
+		priv->comp_cmd = &priv->cmdcomp;
+		init_completion(priv->comp_cmd);
+
+		wmt_dma_init(mmc);
+
+		/* set controller data length */
+		reg_tmp = readw(priv->sdmmc_base + SDMMC_BLKLEN);
+		writew((reg_tmp & 0xF800) | (req->data->blksz - 1),
+		       priv->sdmmc_base + SDMMC_BLKLEN);
+
+		/* set controller block count */
+		writew(req->data->blocks, priv->sdmmc_base + SDMMC_BLKCNT);
+
+		desc = (struct wmt_dma_descriptor *)priv->dma_desc_buffer;
+
+		if (req->data->flags & MMC_DATA_WRITE) {
+			sg_cnt = dma_map_sg(mmc_dev(mmc), req->data->sg,
+					    req->data->sg_len, DMA_TO_DEVICE);
+			cmdtype = 1;
+			if (req->data->blocks > 1)
+				cmdtype = 3;
+		} else {
+			sg_cnt = dma_map_sg(mmc_dev(mmc), req->data->sg,
+					    req->data->sg_len, DMA_FROM_DEVICE);
+			cmdtype = 2;
+			if (req->data->blocks > 1)
+				cmdtype = 4;
+		}
+
+		dma_address = priv->dma_desc_device_addr + 16;
+		desc_cnt = 0;
+
+		for_each_sg(req->data->sg, sg, sg_cnt, i) {
+			offset = 0;
+			while (offset < sg_dma_len(sg)) {
+				wmt_dma_init_descriptor(desc, req->data->blksz,
+						sg_dma_address(sg)+offset,
+						dma_address, 0);
+				desc++;
+				desc_cnt++;
+				offset += req->data->blksz;
+				dma_address += 16;
+				if (desc_cnt == req->data->blocks)
+					break;
+			}
+		}
+		desc--;
+		desc->flags |= 0x80000000;
+
+		if (req->data->flags & MMC_DATA_WRITE)
+			wmt_dma_config(mmc, priv->dma_desc_device_addr,
+				       PDMA_WRITE);
+		else
+			wmt_dma_config(mmc, priv->dma_desc_device_addr,
+				       PDMA_READ);
+
+		wmt_mci_send_command(mmc, command, cmdtype, arg, rsptype);
+
+		priv->comp_dma = &priv->datacomp;
+		init_completion(priv->comp_dma);
+
+		wmt_dma_start(priv);
+		wmt_mci_start_command(priv);
+	}
+}
+
+static void wmt_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	struct wmt_mci_priv *priv;
+	u32 reg_tmp;
+
+	priv = mmc_priv(mmc);
+
+	if (ios->power_mode == MMC_POWER_UP) {
+		wmt_reset_hardware(mmc);
+
+		wmt_set_sd_power(priv, WMT_SD_POWER_ON);
+	}
+	if (ios->power_mode == MMC_POWER_OFF)
+		wmt_set_sd_power(priv, WMT_SD_POWER_OFF);
+
+	if (ios->clock != 0)
+		clk_set_rate(priv->clk_sdmmc, ios->clock);
+
+	switch (ios->bus_width) {
+	case MMC_BUS_WIDTH_8:
+		reg_tmp = readb(priv->sdmmc_base + SDMMC_EXTCTRL);
+		writeb(reg_tmp | 0x04, priv->sdmmc_base + SDMMC_EXTCTRL);
+		break;
+	case MMC_BUS_WIDTH_4:
+		reg_tmp = readb(priv->sdmmc_base + SDMMC_BUSMODE);
+		writeb(reg_tmp | BM_FOURBIT_MODE, priv->sdmmc_base +
+		       SDMMC_BUSMODE);
+
+		reg_tmp = readb(priv->sdmmc_base + SDMMC_EXTCTRL);
+		writeb(reg_tmp & 0xFB, priv->sdmmc_base + SDMMC_EXTCTRL);
+		break;
+	case MMC_BUS_WIDTH_1:
+		reg_tmp = readb(priv->sdmmc_base + SDMMC_BUSMODE);
+		writeb(reg_tmp & BM_ONEBIT_MASK, priv->sdmmc_base +
+		       SDMMC_BUSMODE);
+
+		reg_tmp = readb(priv->sdmmc_base + SDMMC_EXTCTRL);
+		writeb(reg_tmp & 0xFB, priv->sdmmc_base + SDMMC_EXTCTRL);
+		break;
+	}
+}
+
+static int wmt_mci_get_ro(struct mmc_host *mmc)
+{
+	struct wmt_mci_priv *priv = mmc_priv(mmc);
+
+	return !(readb(priv->sdmmc_base + SDMMC_STS0) & STS0_WRITE_PROTECT);
+}
+
+static int wmt_mci_get_cd(struct mmc_host *mmc)
+{
+	struct wmt_mci_priv *priv = mmc_priv(mmc);
+	u32 cd = (readb(priv->sdmmc_base + SDMMC_STS0) & STS0_CD_GPI) >> 3;
+
+	return !(cd ^ priv->cd_inverted);
+}
+
+static struct mmc_host_ops wmt_mci_ops = {
+	.request = wmt_mci_request,
+	.set_ios = wmt_mci_set_ios,
+	.get_ro = wmt_mci_get_ro,
+	.get_cd = wmt_mci_get_cd,
+};
+
+/* Controller capabilities */
+static struct wmt_mci_caps wm8505_caps = {
+	.f_min = 390425,
+	.f_max = 50000000,
+	.ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34,
+	.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED |
+		MMC_CAP_SD_HIGHSPEED,
+	.max_seg_size = 65024,
+	.max_segs = 128,
+	.max_blk_size = 2048,
+};
+
+static struct of_device_id wmt_mci_dt_ids[] = {
+	{ .compatible = "wm,wm8505-sdhc", .data = &wm8505_caps },
+	{ /* Sentinel */ },
+};
+
+static int __devinit wmt_mci_probe(struct platform_device *pdev)
+{
+	struct mmc_host *mmc;
+	struct wmt_mci_priv *priv;
+	struct device_node *np = pdev->dev.of_node;
+	const struct of_device_id *of_id =
+		of_match_device(wmt_mci_dt_ids, &pdev->dev);
+	const struct wmt_mci_caps *wmt_caps = of_id->data;
+	int ret;
+	int regular_irq, dma_irq;
+
+	if (!of_id || !of_id->data) {
+		dev_err(&pdev->dev, "Controller capabilities data missing\n");
+		return -EFAULT;
+	}
+
+	if (!np) {
+		dev_err(&pdev->dev, "Missing SDMMC description in devicetree\n");
+		return -EFAULT;
+	}
+
+	regular_irq = irq_of_parse_and_map(np, 0);
+	dma_irq = irq_of_parse_and_map(np, 1);
+
+	if (!regular_irq || !dma_irq) {
+		dev_err(&pdev->dev, "Getting IRQs failed!\n");
+		ret = -ENXIO;
+		goto fail1;
+	}
+
+	mmc = mmc_alloc_host(sizeof(struct wmt_mci_priv), &pdev->dev);
+	if (!mmc) {
+		dev_err(&pdev->dev, "Failed to allocate mmc_host\n");
+		ret = -ENOMEM;
+		goto fail1;
+	}
+
+	mmc->ops = &wmt_mci_ops;
+	mmc->f_min = wmt_caps->f_min;
+	mmc->f_max = wmt_caps->f_max;
+	mmc->ocr_avail = wmt_caps->ocr_avail;
+	mmc->caps = wmt_caps->caps;
+
+	mmc->max_seg_size = wmt_caps->max_seg_size;
+	mmc->max_segs = wmt_caps->max_segs;
+	mmc->max_blk_size = wmt_caps->max_blk_size;
+
+	mmc->max_req_size = (16*512*mmc->max_segs);
+	mmc->max_blk_count = mmc->max_req_size / 512;
+
+	priv = mmc_priv(mmc);
+	priv->mmc = mmc;
+	priv->dev = &pdev->dev;
+
+	priv->power_inverted = 0;
+	priv->cd_inverted = 0;
+
+	if (of_get_property(np, "sdon-inverted", NULL))
+		priv->power_inverted = 1;
+	if (of_get_property(np, "cd-inverted", NULL))
+		priv->cd_inverted = 1;
+
+	priv->sdmmc_base = of_iomap(np, 0);
+	if (!priv->sdmmc_base) {
+		dev_err(&pdev->dev, "Failed to map IO space\n");
+		ret = -ENOMEM;
+		goto fail2;
+	}
+
+	priv->irq_regular = regular_irq;
+	priv->irq_dma = dma_irq;
+
+	ret = request_irq(regular_irq, wmt_mci_regular_isr, 0, "sdmmc", priv);
+	if (ret) {
+		dev_err(&pdev->dev, "Register regular IRQ fail\n");
+		goto fail3;
+	}
+
+	ret = request_irq(dma_irq, wmt_mci_dma_isr, 32, "sdmmc", priv);
+	if (ret) {
+		dev_err(&pdev->dev, "Register DMA IRQ fail\n");
+		goto fail4;
+	}
+
+	/* alloc some DMA buffers for descriptors/transfers */
+	priv->dma_desc_buffer = dma_alloc_coherent(&pdev->dev,
+						   mmc->max_blk_count * 16,
+						   &priv->dma_desc_device_addr,
+						   208);
+	if (!priv->dma_desc_buffer) {
+		dev_err(&pdev->dev, "DMA alloc fail\n");
+		ret = -EPERM;
+		goto fail5;
+	}
+
+	platform_set_drvdata(pdev, mmc);
+
+	priv->clk_sdmmc = of_clk_get(np, 0);
+	if (IS_ERR(priv->clk_sdmmc)) {
+		dev_err(&pdev->dev, "Error getting clock\n");
+		ret = PTR_ERR(priv->clk_sdmmc);
+		goto fail5;
+	}
+
+	clk_prepare_enable(priv->clk_sdmmc);
+
+	/* configure the controller to a known 'ready' state */
+	wmt_reset_hardware(mmc);
+
+	mmc_add_host(mmc);
+
+	dev_info(&pdev->dev, "WMT SDHC Controller initialized\n");
+
+	return 0;
+fail5:
+	free_irq(dma_irq, priv);
+fail4:
+	free_irq(regular_irq, priv);
+fail3:
+	iounmap(priv->sdmmc_base);
+fail2:
+	mmc_free_host(mmc);
+fail1:
+	return ret;
+}
+
+static int __devexit wmt_mci_remove(struct platform_device *pdev)
+{
+	struct mmc_host *mmc;
+	struct wmt_mci_priv *priv;
+	struct resource *res;
+	u32 reg_tmp;
+
+	mmc = platform_get_drvdata(pdev);
+	priv = mmc_priv(mmc);
+
+	/* reset SD controller */
+	reg_tmp = readb(priv->sdmmc_base + SDMMC_BUSMODE);
+	writel(reg_tmp | BM_SOFT_RESET, priv->sdmmc_base + SDMMC_BUSMODE);
+	reg_tmp = readw(priv->sdmmc_base + SDMMC_BLKLEN);
+	writew(reg_tmp & ~(0xA000), priv->sdmmc_base + SDMMC_BLKLEN);
+	writeb(0xFF, priv->sdmmc_base + SDMMC_STS0);
+	writeb(0xFF, priv->sdmmc_base + SDMMC_STS1);
+
+	/* release the dma buffers */
+	dma_free_coherent(&pdev->dev, priv->mmc->max_blk_count * 16,
+			  priv->dma_desc_buffer, priv->dma_desc_device_addr);
+
+	mmc_remove_host(mmc);
+
+	free_irq(priv->irq_regular, priv);
+	free_irq(priv->irq_dma, priv);
+
+	iounmap(priv->sdmmc_base);
+
+	clk_disable_unprepare(priv->clk_sdmmc);
+	clk_put(priv->clk_sdmmc);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(res->start, res->end - res->start + 1);
+
+	mmc_free_host(mmc);
+
+	platform_set_drvdata(pdev, NULL);
+
+	dev_info(&pdev->dev, "WMT MCI device removed\n");
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int wmt_mci_suspend(struct device *dev)
+{
+	u32 reg_tmp;
+	struct platform_device *pdev = to_platform_device(dev);
+	struct mmc_host *mmc = platform_get_drvdata(pdev);
+	struct wmt_mci_priv *priv;
+	int ret;
+
+	if (!mmc)
+		return 0;
+
+	priv = mmc_priv(mmc);
+	ret = mmc_suspend_host(mmc);
+
+	if (!ret) {
+		reg_tmp = readb(priv->sdmmc_base + SDMMC_BUSMODE);
+		writeb(reg_tmp | BM_SOFT_RESET, priv->sdmmc_base +
+		       SDMMC_BUSMODE);
+
+		reg_tmp = readw(priv->sdmmc_base + SDMMC_BLKLEN);
+		writew(reg_tmp & 0x5FFF, priv->sdmmc_base + SDMMC_BLKLEN);
+
+		writeb(0xFF, priv->sdmmc_base + SDMMC_STS0);
+		writeb(0xFF, priv->sdmmc_base + SDMMC_STS1);
+
+		clk_disable(priv->clk_sdmmc);
+	}
+	return ret;
+}
+
+static int wmt_mci_resume(struct device *dev)
+{
+	u32 reg_tmp;
+	struct platform_device *pdev = to_platform_device(dev);
+	struct mmc_host *mmc = platform_get_drvdata(pdev);
+	struct wmt_mci_priv *priv;
+	int ret = 0;
+
+	if (mmc) {
+		priv = mmc_priv(mmc);
+		clk_enable(priv->clk_sdmmc);
+
+		reg_tmp = readb(priv->sdmmc_base + SDMMC_BUSMODE);
+		writeb(reg_tmp | BM_SOFT_RESET, priv->sdmmc_base +
+		       SDMMC_BUSMODE);
+
+		reg_tmp = readw(priv->sdmmc_base + SDMMC_BLKLEN);
+		writew(reg_tmp | (BLKL_GPI_CD | BLKL_INT_ENABLE),
+		       priv->sdmmc_base + SDMMC_BLKLEN);
+
+		reg_tmp = readb(priv->sdmmc_base + SDMMC_INTMASK0);
+		writeb(reg_tmp | INT0_DI_INT_EN, priv->sdmmc_base +
+		       SDMMC_INTMASK0);
+
+		ret = mmc_resume_host(mmc);
+	}
+
+	return ret;
+}
+
+static const struct dev_pm_ops wmt_mci_pm = {
+	.suspend        = wmt_mci_suspend,
+	.resume         = wmt_mci_resume,
+};
+
+#define wmt_mci_pm_ops (&wmt_mci_pm)
+
+#else	/* !CONFIG_PM */
+
+#define wmt_mci_pm_ops NULL
+
+#endif
+
+static struct platform_driver wmt_mci_driver = {
+	.probe = wmt_mci_probe,
+	.remove = __exit_p(wmt_mci_remove),
+	.driver = {
+		.name = DRIVER_NAME,
+		.owner = THIS_MODULE,
+		.pm = wmt_mci_pm_ops,
+		.of_match_table = wmt_mci_dt_ids,
+	},
+};
+
+module_platform_driver(wmt_mci_driver);
+
+MODULE_DESCRIPTION("Wondermedia MMC/SD Driver");
+MODULE_AUTHOR("Tony Prisk");
+MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(of, wmt_mci_dt_ids);
diff --git a/drivers/mtd/devices/slram.c b/drivers/mtd/devices/slram.c
index 8f52fc8..5a5cd2a 100644
--- a/drivers/mtd/devices/slram.c
+++ b/drivers/mtd/devices/slram.c
@@ -240,7 +240,7 @@
 
 	if (*(szlength) != '+') {
 		devlength = simple_strtoul(szlength, &buffer, 0);
-		devlength = handle_unit(devlength, buffer) - devstart;
+		devlength = handle_unit(devlength, buffer);
 		if (devlength < devstart)
 			goto err_out;
 
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index 374c46d..ec794a7 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -1077,7 +1077,8 @@
  * until the request succeeds or until the allocation size falls below
  * the system page size. This attempts to make sure it does not adversely
  * impact system performance, so when allocating more than one page, we
- * ask the memory allocator to avoid re-trying.
+ * ask the memory allocator to avoid re-trying, swapping, writing back
+ * or performing I/O.
  *
  * Note, this function also makes sure that the allocated buffer is aligned to
  * the MTD device's min. I/O unit, i.e. the "mtd->writesize" value.
@@ -1091,7 +1092,8 @@
  */
 void *mtd_kmalloc_up_to(const struct mtd_info *mtd, size_t *size)
 {
-	gfp_t flags = __GFP_NOWARN | __GFP_WAIT | __GFP_NORETRY;
+	gfp_t flags = __GFP_NOWARN | __GFP_WAIT |
+		       __GFP_NORETRY | __GFP_NO_KSWAPD;
 	size_t min_alloc = max_t(size_t, mtd->writesize, PAGE_SIZE);
 	void *kbuf;
 
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 9144557..92623ac 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -41,6 +41,7 @@
 #include <linux/gpio.h>
 #include <linux/io.h>
 #include <linux/platform_data/atmel.h>
+#include <linux/pinctrl/consumer.h>
 
 #include <mach/cpu.h>
 
@@ -1370,6 +1371,7 @@
 	struct resource *mem;
 	struct mtd_part_parser_data ppdata = {};
 	int res;
+	struct pinctrl *pinctrl;
 
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!mem) {
@@ -1414,6 +1416,13 @@
 	nand_chip->IO_ADDR_W = host->io_base;
 	nand_chip->cmd_ctrl = atmel_nand_cmd_ctrl;
 
+	pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
+	if (IS_ERR(pinctrl)) {
+		dev_err(host->dev, "Failed to request pinctrl\n");
+		res = PTR_ERR(pinctrl);
+		goto err_ecc_ioremap;
+	}
+
 	if (gpio_is_valid(host->board.rdy_pin)) {
 		res = gpio_request(host->board.rdy_pin, "nand_rdy");
 		if (res < 0) {
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index ec6841d..1a03b7f 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -2983,13 +2983,15 @@
 	/*
 	 * Field definitions are in the following datasheets:
 	 * Old style (4,5 byte ID): Samsung K9GAG08U0M (p.32)
-	 * New style   (6 byte ID): Samsung K9GAG08U0F (p.44)
+	 * New Samsung (6 byte ID): Samsung K9GAG08U0F (p.44)
 	 * Hynix MLC   (6 byte ID): Hynix H27UBG8T2B (p.22)
 	 *
-	 * Check for ID length, cell type, and Hynix/Samsung ID to decide what
-	 * to do.
+	 * Check for ID length, non-zero 6th byte, cell type, and Hynix/Samsung
+	 * ID to decide what to do.
 	 */
-	if (id_len == 6 && id_data[0] == NAND_MFR_SAMSUNG) {
+	if (id_len == 6 && id_data[0] == NAND_MFR_SAMSUNG &&
+			(chip->cellinfo & NAND_CI_CELLTYPE_MSK) &&
+			id_data[5] != 0x00) {
 		/* Calc pagesize */
 		mtd->writesize = 2048 << (extid & 0x03);
 		extid >>= 2;
diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c
index 4fbfe96..f48ac5d 100644
--- a/drivers/mtd/nand/sh_flctl.c
+++ b/drivers/mtd/nand/sh_flctl.c
@@ -727,7 +727,9 @@
 
 		if (!flctl->qos_request) {
 			ret = dev_pm_qos_add_request(&flctl->pdev->dev,
-							&flctl->pm_qos, 100);
+							&flctl->pm_qos,
+							DEV_PM_QOS_LATENCY,
+							100);
 			if (ret < 0)
 				dev_err(&flctl->pdev->dev,
 					"PM QoS request failed: %d\n", ret);
diff --git a/drivers/mtd/ofpart.c b/drivers/mtd/ofpart.c
index 64be8f08..d9127e2 100644
--- a/drivers/mtd/ofpart.c
+++ b/drivers/mtd/ofpart.c
@@ -121,7 +121,7 @@
 	nr_parts = plen / sizeof(part[0]);
 
 	*pparts = kzalloc(nr_parts * sizeof(*(*pparts)), GFP_KERNEL);
-	if (!pparts)
+	if (!*pparts)
 		return -ENOMEM;
 
 	names = of_get_property(dp, "partition-names", &plen);
diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c
index 7153e0d2..b3f41f2 100644
--- a/drivers/mtd/onenand/onenand_base.c
+++ b/drivers/mtd/onenand/onenand_base.c
@@ -3694,7 +3694,7 @@
  * flexonenand_set_boundary	- Writes the SLC boundary
  * @param mtd			- mtd info structure
  */
-int flexonenand_set_boundary(struct mtd_info *mtd, int die,
+static int flexonenand_set_boundary(struct mtd_info *mtd, int die,
 				    int boundary, int lock)
 {
 	struct onenand_chip *this = mtd->priv;
diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c
index da7b449..2144f61 100644
--- a/drivers/mtd/ubi/wl.c
+++ b/drivers/mtd/ubi/wl.c
@@ -498,7 +498,7 @@
  * @ubi: UBI device description object
  *
  * This function returns a physical eraseblock in case of success and a
- * negative error code in case of failure. Might sleep.
+ * negative error code in case of failure.
  */
 static int __wl_get_peb(struct ubi_device *ubi)
 {
@@ -540,13 +540,6 @@
 	 * ubi_wl_get_peb() after removing e from the pool. */
 	prot_queue_add(ubi, e);
 #endif
-	err = ubi_self_check_all_ff(ubi, e->pnum, ubi->vid_hdr_aloffset,
-				    ubi->peb_size - ubi->vid_hdr_aloffset);
-	if (err) {
-		ubi_err("new PEB %d does not contain all 0xFF bytes", e->pnum);
-		return err;
-	}
-
 	return e->pnum;
 }
 
@@ -679,17 +672,30 @@
 #else
 static struct ubi_wl_entry *get_peb_for_wl(struct ubi_device *ubi)
 {
-	return find_wl_entry(ubi, &ubi->free, WL_FREE_MAX_DIFF);
+	struct ubi_wl_entry *e;
+
+	e = find_wl_entry(ubi, &ubi->free, WL_FREE_MAX_DIFF);
+	self_check_in_wl_tree(ubi, e, &ubi->free);
+	rb_erase(&e->u.rb, &ubi->free);
+
+	return e;
 }
 
 int ubi_wl_get_peb(struct ubi_device *ubi)
 {
-	int peb;
+	int peb, err;
 
 	spin_lock(&ubi->wl_lock);
 	peb = __wl_get_peb(ubi);
 	spin_unlock(&ubi->wl_lock);
 
+	err = ubi_self_check_all_ff(ubi, peb, ubi->vid_hdr_aloffset,
+				    ubi->peb_size - ubi->vid_hdr_aloffset);
+	if (err) {
+		ubi_err("new PEB %d does not contain all 0xFF bytes", peb);
+		return err;
+	}
+
 	return peb;
 }
 #endif
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index b2530b0..a7d4735 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -1379,6 +1379,8 @@
 	struct net_device *bond_dev = bond->dev;
 	netdev_features_t vlan_features = BOND_VLAN_FEATURES;
 	unsigned short max_hard_header_len = ETH_HLEN;
+	unsigned int gso_max_size = GSO_MAX_SIZE;
+	u16 gso_max_segs = GSO_MAX_SEGS;
 	int i;
 	unsigned int flags, dst_release_flag = IFF_XMIT_DST_RELEASE;
 
@@ -1394,11 +1396,16 @@
 		dst_release_flag &= slave->dev->priv_flags;
 		if (slave->dev->hard_header_len > max_hard_header_len)
 			max_hard_header_len = slave->dev->hard_header_len;
+
+		gso_max_size = min(gso_max_size, slave->dev->gso_max_size);
+		gso_max_segs = min(gso_max_segs, slave->dev->gso_max_segs);
 	}
 
 done:
 	bond_dev->vlan_features = vlan_features;
 	bond_dev->hard_header_len = max_hard_header_len;
+	bond_dev->gso_max_segs = gso_max_segs;
+	netif_set_gso_max_size(bond_dev, gso_max_size);
 
 	flags = bond_dev->priv_flags & ~IFF_XMIT_DST_RELEASE;
 	bond_dev->priv_flags = flags | dst_release_flag;
@@ -3452,6 +3459,28 @@
 
 /*-------------------------- Device entry points ----------------------------*/
 
+static void bond_work_init_all(struct bonding *bond)
+{
+	INIT_DELAYED_WORK(&bond->mcast_work,
+			  bond_resend_igmp_join_requests_delayed);
+	INIT_DELAYED_WORK(&bond->alb_work, bond_alb_monitor);
+	INIT_DELAYED_WORK(&bond->mii_work, bond_mii_monitor);
+	if (bond->params.mode == BOND_MODE_ACTIVEBACKUP)
+		INIT_DELAYED_WORK(&bond->arp_work, bond_activebackup_arp_mon);
+	else
+		INIT_DELAYED_WORK(&bond->arp_work, bond_loadbalance_arp_mon);
+	INIT_DELAYED_WORK(&bond->ad_work, bond_3ad_state_machine_handler);
+}
+
+static void bond_work_cancel_all(struct bonding *bond)
+{
+	cancel_delayed_work_sync(&bond->mii_work);
+	cancel_delayed_work_sync(&bond->arp_work);
+	cancel_delayed_work_sync(&bond->alb_work);
+	cancel_delayed_work_sync(&bond->ad_work);
+	cancel_delayed_work_sync(&bond->mcast_work);
+}
+
 static int bond_open(struct net_device *bond_dev)
 {
 	struct bonding *bond = netdev_priv(bond_dev);
@@ -3474,41 +3503,27 @@
 	}
 	read_unlock(&bond->lock);
 
-	INIT_DELAYED_WORK(&bond->mcast_work, bond_resend_igmp_join_requests_delayed);
+	bond_work_init_all(bond);
 
 	if (bond_is_lb(bond)) {
 		/* bond_alb_initialize must be called before the timer
 		 * is started.
 		 */
-		if (bond_alb_initialize(bond, (bond->params.mode == BOND_MODE_ALB))) {
-			/* something went wrong - fail the open operation */
+		if (bond_alb_initialize(bond, (bond->params.mode == BOND_MODE_ALB)))
 			return -ENOMEM;
-		}
-
-		INIT_DELAYED_WORK(&bond->alb_work, bond_alb_monitor);
 		queue_delayed_work(bond->wq, &bond->alb_work, 0);
 	}
 
-	if (bond->params.miimon) {  /* link check interval, in milliseconds. */
-		INIT_DELAYED_WORK(&bond->mii_work, bond_mii_monitor);
+	if (bond->params.miimon)  /* link check interval, in milliseconds. */
 		queue_delayed_work(bond->wq, &bond->mii_work, 0);
-	}
 
 	if (bond->params.arp_interval) {  /* arp interval, in milliseconds. */
-		if (bond->params.mode == BOND_MODE_ACTIVEBACKUP)
-			INIT_DELAYED_WORK(&bond->arp_work,
-					  bond_activebackup_arp_mon);
-		else
-			INIT_DELAYED_WORK(&bond->arp_work,
-					  bond_loadbalance_arp_mon);
-
 		queue_delayed_work(bond->wq, &bond->arp_work, 0);
 		if (bond->params.arp_validate)
 			bond->recv_probe = bond_arp_rcv;
 	}
 
 	if (bond->params.mode == BOND_MODE_8023AD) {
-		INIT_DELAYED_WORK(&bond->ad_work, bond_3ad_state_machine_handler);
 		queue_delayed_work(bond->wq, &bond->ad_work, 0);
 		/* register to receive LACPDUs */
 		bond->recv_probe = bond_3ad_lacpdu_recv;
@@ -3523,34 +3538,10 @@
 	struct bonding *bond = netdev_priv(bond_dev);
 
 	write_lock_bh(&bond->lock);
-
 	bond->send_peer_notif = 0;
-
 	write_unlock_bh(&bond->lock);
 
-	if (bond->params.miimon) {  /* link check interval, in milliseconds. */
-		cancel_delayed_work_sync(&bond->mii_work);
-	}
-
-	if (bond->params.arp_interval) {  /* arp interval, in milliseconds. */
-		cancel_delayed_work_sync(&bond->arp_work);
-	}
-
-	switch (bond->params.mode) {
-	case BOND_MODE_8023AD:
-		cancel_delayed_work_sync(&bond->ad_work);
-		break;
-	case BOND_MODE_TLB:
-	case BOND_MODE_ALB:
-		cancel_delayed_work_sync(&bond->alb_work);
-		break;
-	default:
-		break;
-	}
-
-	if (delayed_work_pending(&bond->mcast_work))
-		cancel_delayed_work_sync(&bond->mcast_work);
-
+	bond_work_cancel_all(bond);
 	if (bond_is_lb(bond)) {
 		/* Must be called only after all
 		 * slaves have been released
@@ -4429,26 +4420,6 @@
 	bond_dev->features |= bond_dev->hw_features;
 }
 
-static void bond_work_cancel_all(struct bonding *bond)
-{
-	if (bond->params.miimon && delayed_work_pending(&bond->mii_work))
-		cancel_delayed_work_sync(&bond->mii_work);
-
-	if (bond->params.arp_interval && delayed_work_pending(&bond->arp_work))
-		cancel_delayed_work_sync(&bond->arp_work);
-
-	if (bond->params.mode == BOND_MODE_ALB &&
-	    delayed_work_pending(&bond->alb_work))
-		cancel_delayed_work_sync(&bond->alb_work);
-
-	if (bond->params.mode == BOND_MODE_8023AD &&
-	    delayed_work_pending(&bond->ad_work))
-		cancel_delayed_work_sync(&bond->ad_work);
-
-	if (delayed_work_pending(&bond->mcast_work))
-		cancel_delayed_work_sync(&bond->mcast_work);
-}
-
 /*
 * Destroy a bonding device.
 * Must be under rtnl_lock when this function is called.
@@ -4699,12 +4670,13 @@
 	     arp_ip_count++) {
 		/* not complete check, but should be good enough to
 		   catch mistakes */
-		if (!isdigit(arp_ip_target[arp_ip_count][0])) {
+		__be32 ip = in_aton(arp_ip_target[arp_ip_count]);
+		if (!isdigit(arp_ip_target[arp_ip_count][0]) ||
+		    ip == 0 || ip == htonl(INADDR_BROADCAST)) {
 			pr_warning("Warning: bad arp_ip_target module parameter (%s), ARP monitoring will not be performed\n",
 				   arp_ip_target[arp_ip_count]);
 			arp_interval = 0;
 		} else {
-			__be32 ip = in_aton(arp_ip_target[arp_ip_count]);
 			arp_target[arp_ip_count] = ip;
 		}
 	}
diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c
index ef8d2a0..1877ed7 100644
--- a/drivers/net/bonding/bond_sysfs.c
+++ b/drivers/net/bonding/bond_sysfs.c
@@ -513,6 +513,8 @@
 	int new_value, ret = count;
 	struct bonding *bond = to_bond(d);
 
+	if (!rtnl_trylock())
+		return restart_syscall();
 	if (sscanf(buf, "%d", &new_value) != 1) {
 		pr_err("%s: no arp_interval value specified.\n",
 		       bond->dev->name);
@@ -539,10 +541,6 @@
 		pr_info("%s: ARP monitoring cannot be used with MII monitoring. %s Disabling MII monitoring.\n",
 			bond->dev->name, bond->dev->name);
 		bond->params.miimon = 0;
-		if (delayed_work_pending(&bond->mii_work)) {
-			cancel_delayed_work(&bond->mii_work);
-			flush_workqueue(bond->wq);
-		}
 	}
 	if (!bond->params.arp_targets[0]) {
 		pr_info("%s: ARP monitoring has been set up, but no ARP targets have been specified.\n",
@@ -554,19 +552,12 @@
 		 * timer will get fired off when the open function
 		 * is called.
 		 */
-		if (!delayed_work_pending(&bond->arp_work)) {
-			if (bond->params.mode == BOND_MODE_ACTIVEBACKUP)
-				INIT_DELAYED_WORK(&bond->arp_work,
-						  bond_activebackup_arp_mon);
-			else
-				INIT_DELAYED_WORK(&bond->arp_work,
-						  bond_loadbalance_arp_mon);
-
-			queue_delayed_work(bond->wq, &bond->arp_work, 0);
-		}
+		cancel_delayed_work_sync(&bond->mii_work);
+		queue_delayed_work(bond->wq, &bond->arp_work, 0);
 	}
 
 out:
+	rtnl_unlock();
 	return ret;
 }
 static DEVICE_ATTR(arp_interval, S_IRUGO | S_IWUSR,
@@ -962,6 +953,8 @@
 	int new_value, ret = count;
 	struct bonding *bond = to_bond(d);
 
+	if (!rtnl_trylock())
+		return restart_syscall();
 	if (sscanf(buf, "%d", &new_value) != 1) {
 		pr_err("%s: no miimon value specified.\n",
 		       bond->dev->name);
@@ -993,10 +986,6 @@
 				bond->params.arp_validate =
 					BOND_ARP_VALIDATE_NONE;
 			}
-			if (delayed_work_pending(&bond->arp_work)) {
-				cancel_delayed_work(&bond->arp_work);
-				flush_workqueue(bond->wq);
-			}
 		}
 
 		if (bond->dev->flags & IFF_UP) {
@@ -1005,15 +994,12 @@
 			 * timer will get fired off when the open function
 			 * is called.
 			 */
-			if (!delayed_work_pending(&bond->mii_work)) {
-				INIT_DELAYED_WORK(&bond->mii_work,
-						  bond_mii_monitor);
-				queue_delayed_work(bond->wq,
-						   &bond->mii_work, 0);
-			}
+			cancel_delayed_work_sync(&bond->arp_work);
+			queue_delayed_work(bond->wq, &bond->mii_work, 0);
 		}
 	}
 out:
+	rtnl_unlock();
 	return ret;
 }
 static DEVICE_ATTR(miimon, S_IRUGO | S_IWUSR,
@@ -1582,6 +1568,7 @@
 		goto out;
 	}
 
+	read_lock(&bond->lock);
 	bond_for_each_slave(bond, slave, i) {
 		if (!bond_is_active_slave(slave)) {
 			if (new_value)
@@ -1590,6 +1577,7 @@
 				slave->inactive = 1;
 		}
 	}
+	read_unlock(&bond->lock);
 out:
 	return ret;
 }
diff --git a/drivers/net/can/usb/peak_usb/pcan_usb.c b/drivers/net/can/usb/peak_usb/pcan_usb.c
index 86f26a1..25723d8 100644
--- a/drivers/net/can/usb/peak_usb/pcan_usb.c
+++ b/drivers/net/can/usb/peak_usb/pcan_usb.c
@@ -519,8 +519,10 @@
 	mc->pdev->dev.can.state = new_state;
 
 	if (status_len & PCAN_USB_STATUSLEN_TIMESTAMP) {
+		struct skb_shared_hwtstamps *hwts = skb_hwtstamps(skb);
+
 		peak_usb_get_ts_tv(&mc->pdev->time_ref, mc->ts16, &tv);
-		skb->tstamp = timeval_to_ktime(tv);
+		hwts->hwtstamp = timeval_to_ktime(tv);
 	}
 
 	netif_rx(skb);
@@ -605,6 +607,7 @@
 	struct sk_buff *skb;
 	struct can_frame *cf;
 	struct timeval tv;
+	struct skb_shared_hwtstamps *hwts;
 
 	skb = alloc_can_skb(mc->netdev, &cf);
 	if (!skb)
@@ -652,7 +655,8 @@
 
 	/* convert timestamp into kernel time */
 	peak_usb_get_ts_tv(&mc->pdev->time_ref, mc->ts16, &tv);
-	skb->tstamp = timeval_to_ktime(tv);
+	hwts = skb_hwtstamps(skb);
+	hwts->hwtstamp = timeval_to_ktime(tv);
 
 	/* push the skb */
 	netif_rx(skb);
diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_pro.c b/drivers/net/can/usb/peak_usb/pcan_usb_pro.c
index e1626d9..30d79bf 100644
--- a/drivers/net/can/usb/peak_usb/pcan_usb_pro.c
+++ b/drivers/net/can/usb/peak_usb/pcan_usb_pro.c
@@ -532,6 +532,7 @@
 	struct can_frame *can_frame;
 	struct sk_buff *skb;
 	struct timeval tv;
+	struct skb_shared_hwtstamps *hwts;
 
 	skb = alloc_can_skb(netdev, &can_frame);
 	if (!skb)
@@ -549,7 +550,8 @@
 		memcpy(can_frame->data, rx->data, can_frame->can_dlc);
 
 	peak_usb_get_ts_tv(&usb_if->time_ref, le32_to_cpu(rx->ts32), &tv);
-	skb->tstamp = timeval_to_ktime(tv);
+	hwts = skb_hwtstamps(skb);
+	hwts->hwtstamp = timeval_to_ktime(tv);
 
 	netif_rx(skb);
 	netdev->stats.rx_packets++;
@@ -570,6 +572,7 @@
 	u8 err_mask = 0;
 	struct sk_buff *skb;
 	struct timeval tv;
+	struct skb_shared_hwtstamps *hwts;
 
 	/* nothing should be sent while in BUS_OFF state */
 	if (dev->can.state == CAN_STATE_BUS_OFF)
@@ -664,7 +667,8 @@
 	dev->can.state = new_state;
 
 	peak_usb_get_ts_tv(&usb_if->time_ref, le32_to_cpu(er->ts32), &tv);
-	skb->tstamp = timeval_to_ktime(tv);
+	hwts = skb_hwtstamps(skb);
+	hwts->hwtstamp = timeval_to_ktime(tv);
 	netif_rx(skb);
 	netdev->stats.rx_packets++;
 	netdev->stats.rx_bytes += can_frame->can_dlc;
diff --git a/drivers/net/ethernet/8390/ne.c b/drivers/net/ethernet/8390/ne.c
index d04911d..47618e5 100644
--- a/drivers/net/ethernet/8390/ne.c
+++ b/drivers/net/ethernet/8390/ne.c
@@ -813,6 +813,7 @@
 		dev->irq = irq[this_dev];
 		dev->mem_end = bad[this_dev];
 	}
+	SET_NETDEV_DEV(dev, &pdev->dev);
 	err = do_ne_probe(dev);
 	if (err) {
 		free_netdev(dev);
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index bd1fd3d..01611b3 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -9545,10 +9545,13 @@
  */
 static void __devinit bnx2x_prev_interrupted_dmae(struct bnx2x *bp)
 {
-	u32 val = REG_RD(bp, PGLUE_B_REG_PGLUE_B_INT_STS);
-	if (val & PGLUE_B_PGLUE_B_INT_STS_REG_WAS_ERROR_ATTN) {
-		BNX2X_ERR("was error bit was found to be set in pglueb upon startup. Clearing");
-		REG_WR(bp, PGLUE_B_REG_WAS_ERROR_PF_7_0_CLR, 1 << BP_FUNC(bp));
+	if (!CHIP_IS_E1x(bp)) {
+		u32 val = REG_RD(bp, PGLUE_B_REG_PGLUE_B_INT_STS);
+		if (val & PGLUE_B_PGLUE_B_INT_STS_REG_WAS_ERROR_ATTN) {
+			BNX2X_ERR("was error bit was found to be set in pglueb upon startup. Clearing");
+			REG_WR(bp, PGLUE_B_REG_WAS_ERROR_PF_7_0_CLR,
+			       1 << BP_FUNC(bp));
+		}
 	}
 }
 
diff --git a/drivers/net/ethernet/jme.c b/drivers/net/ethernet/jme.c
index 92317e9..60ac46f 100644
--- a/drivers/net/ethernet/jme.c
+++ b/drivers/net/ethernet/jme.c
@@ -1860,10 +1860,14 @@
 	jme_clear_pm(jme);
 	JME_NAPI_ENABLE(jme);
 
-	tasklet_enable(&jme->linkch_task);
-	tasklet_enable(&jme->txclean_task);
-	tasklet_hi_enable(&jme->rxclean_task);
-	tasklet_hi_enable(&jme->rxempty_task);
+	tasklet_init(&jme->linkch_task, jme_link_change_tasklet,
+		     (unsigned long) jme);
+	tasklet_init(&jme->txclean_task, jme_tx_clean_tasklet,
+		     (unsigned long) jme);
+	tasklet_init(&jme->rxclean_task, jme_rx_clean_tasklet,
+		     (unsigned long) jme);
+	tasklet_init(&jme->rxempty_task, jme_rx_empty_tasklet,
+		     (unsigned long) jme);
 
 	rc = jme_request_irq(jme);
 	if (rc)
@@ -3079,22 +3083,6 @@
 	tasklet_init(&jme->pcc_task,
 		     jme_pcc_tasklet,
 		     (unsigned long) jme);
-	tasklet_init(&jme->linkch_task,
-		     jme_link_change_tasklet,
-		     (unsigned long) jme);
-	tasklet_init(&jme->txclean_task,
-		     jme_tx_clean_tasklet,
-		     (unsigned long) jme);
-	tasklet_init(&jme->rxclean_task,
-		     jme_rx_clean_tasklet,
-		     (unsigned long) jme);
-	tasklet_init(&jme->rxempty_task,
-		     jme_rx_empty_tasklet,
-		     (unsigned long) jme);
-	tasklet_disable_nosync(&jme->linkch_task);
-	tasklet_disable_nosync(&jme->txclean_task);
-	tasklet_disable_nosync(&jme->rxclean_task);
-	tasklet_disable_nosync(&jme->rxempty_task);
 	jme->dpi.cur = PCC_P1;
 
 	jme->reg_ghc = 0;
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c b/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c
index 5d367958..b799ab12 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c
@@ -237,7 +237,7 @@
 	if (err)
 		return err;
 
-	memcpy(priv->maxrate, tmp, sizeof(*priv->maxrate));
+	memcpy(priv->maxrate, tmp, sizeof(priv->maxrate));
 
 	return 0;
 }
diff --git a/drivers/net/ethernet/micrel/ksz884x.c b/drivers/net/ethernet/micrel/ksz884x.c
index e558edd..69e0197 100644
--- a/drivers/net/ethernet/micrel/ksz884x.c
+++ b/drivers/net/ethernet/micrel/ksz884x.c
@@ -5459,8 +5459,10 @@
 	rc = request_irq(dev->irq, netdev_intr, IRQF_SHARED, dev->name, dev);
 	if (rc)
 		return rc;
-	tasklet_enable(&hw_priv->rx_tasklet);
-	tasklet_enable(&hw_priv->tx_tasklet);
+	tasklet_init(&hw_priv->rx_tasklet, rx_proc_task,
+		     (unsigned long) hw_priv);
+	tasklet_init(&hw_priv->tx_tasklet, tx_proc_task,
+		     (unsigned long) hw_priv);
 
 	hw->promiscuous = 0;
 	hw->all_multi = 0;
@@ -7033,16 +7035,6 @@
 	spin_lock_init(&hw_priv->hwlock);
 	mutex_init(&hw_priv->lock);
 
-	/* tasklet is enabled. */
-	tasklet_init(&hw_priv->rx_tasklet, rx_proc_task,
-		(unsigned long) hw_priv);
-	tasklet_init(&hw_priv->tx_tasklet, tx_proc_task,
-		(unsigned long) hw_priv);
-
-	/* tasklet_enable will decrement the atomic counter. */
-	tasklet_disable(&hw_priv->rx_tasklet);
-	tasklet_disable(&hw_priv->tx_tasklet);
-
 	for (i = 0; i < TOTAL_PORT_NUM; i++)
 		init_waitqueue_head(&hw_priv->counter[i].counter);
 
diff --git a/drivers/net/ethernet/realtek/8139cp.c b/drivers/net/ethernet/realtek/8139cp.c
index 1c81825..609125a 100644
--- a/drivers/net/ethernet/realtek/8139cp.c
+++ b/drivers/net/ethernet/realtek/8139cp.c
@@ -979,17 +979,6 @@
 	cpw32_f (MAC0 + 0, le32_to_cpu (*(__le32 *) (dev->dev_addr + 0)));
 	cpw32_f (MAC0 + 4, le32_to_cpu (*(__le32 *) (dev->dev_addr + 4)));
 
-	cpw32_f(HiTxRingAddr, 0);
-	cpw32_f(HiTxRingAddr + 4, 0);
-
-	ring_dma = cp->ring_dma;
-	cpw32_f(RxRingAddr, ring_dma & 0xffffffff);
-	cpw32_f(RxRingAddr + 4, (ring_dma >> 16) >> 16);
-
-	ring_dma += sizeof(struct cp_desc) * CP_RX_RING_SIZE;
-	cpw32_f(TxRingAddr, ring_dma & 0xffffffff);
-	cpw32_f(TxRingAddr + 4, (ring_dma >> 16) >> 16);
-
 	cp_start_hw(cp);
 	cpw8(TxThresh, 0x06); /* XXX convert magic num to a constant */
 
@@ -1003,6 +992,17 @@
 
 	cpw8(Config5, cpr8(Config5) & PMEStatus);
 
+	cpw32_f(HiTxRingAddr, 0);
+	cpw32_f(HiTxRingAddr + 4, 0);
+
+	ring_dma = cp->ring_dma;
+	cpw32_f(RxRingAddr, ring_dma & 0xffffffff);
+	cpw32_f(RxRingAddr + 4, (ring_dma >> 16) >> 16);
+
+	ring_dma += sizeof(struct cp_desc) * CP_RX_RING_SIZE;
+	cpw32_f(TxRingAddr, ring_dma & 0xffffffff);
+	cpw32_f(TxRingAddr + 4, (ring_dma >> 16) >> 16);
+
 	cpw16(MultiIntr, 0);
 
 	cpw8_f(Cfg9346, Cfg9346_Lock);
@@ -1060,17 +1060,22 @@
 
 static int cp_alloc_rings (struct cp_private *cp)
 {
+	struct device *d = &cp->pdev->dev;
 	void *mem;
+	int rc;
 
-	mem = dma_alloc_coherent(&cp->pdev->dev, CP_RING_BYTES,
-				 &cp->ring_dma, GFP_KERNEL);
+	mem = dma_alloc_coherent(d, CP_RING_BYTES, &cp->ring_dma, GFP_KERNEL);
 	if (!mem)
 		return -ENOMEM;
 
 	cp->rx_ring = mem;
 	cp->tx_ring = &cp->rx_ring[CP_RX_RING_SIZE];
 
-	return cp_init_rings(cp);
+	rc = cp_init_rings(cp);
+	if (rc < 0)
+		dma_free_coherent(d, CP_RING_BYTES, cp->rx_ring, cp->ring_dma);
+
+	return rc;
 }
 
 static void cp_clean_rings (struct cp_private *cp)
diff --git a/drivers/net/ethernet/sis/sis900.c b/drivers/net/ethernet/sis/sis900.c
index fb9f6b3..edf5edb 100644
--- a/drivers/net/ethernet/sis/sis900.c
+++ b/drivers/net/ethernet/sis/sis900.c
@@ -2479,7 +2479,7 @@
 	netif_start_queue(net_dev);
 
 	/* Workaround for EDB */
-	sis900_set_mode(ioaddr, HW_SPEED_10_MBPS, FDX_CAPABLE_HALF_SELECTED);
+	sis900_set_mode(sis_priv, HW_SPEED_10_MBPS, FDX_CAPABLE_HALF_SELECTED);
 
 	/* Enable all known interrupts by setting the interrupt mask. */
 	sw32(imr, RxSOVR | RxORN | RxERR | RxOK | TxURN | TxERR | TxIDLE);
diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c
index 62d1baf..c53c0f4 100644
--- a/drivers/net/ethernet/smsc/smsc911x.c
+++ b/drivers/net/ethernet/smsc/smsc911x.c
@@ -2110,7 +2110,7 @@
 static int __devinit smsc911x_init(struct net_device *dev)
 {
 	struct smsc911x_data *pdata = netdev_priv(dev);
-	unsigned int byte_test;
+	unsigned int byte_test, mask;
 	unsigned int to = 100;
 
 	SMSC_TRACE(pdata, probe, "Driver Parameters:");
@@ -2130,9 +2130,22 @@
 	/*
 	 * poll the READY bit in PMT_CTRL. Any other access to the device is
 	 * forbidden while this bit isn't set. Try for 100ms
+	 *
+	 * Note that this test is done before the WORD_SWAP register is
+	 * programmed. So in some configurations the READY bit is at 16 before
+	 * WORD_SWAP is written to. This issue is worked around by waiting
+	 * until either bit 0 or bit 16 gets set in PMT_CTRL.
+	 *
+	 * SMSC has confirmed that checking bit 16 (marked as reserved in
+	 * the datasheet) is fine since these bits "will either never be set
+	 * or can only go high after READY does (so also indicate the device
+	 * is ready)".
 	 */
-	while (!(smsc911x_reg_read(pdata, PMT_CTRL) & PMT_CTRL_READY_) && --to)
+
+	mask = PMT_CTRL_READY_ | swahw32(PMT_CTRL_READY_);
+	while (!(smsc911x_reg_read(pdata, PMT_CTRL) & mask) && --to)
 		udelay(1000);
+
 	if (to == 0) {
 		pr_err("Device not READY in 100ms aborting\n");
 		return -ENODEV;
diff --git a/drivers/net/ethernet/tile/tilegx.c b/drivers/net/ethernet/tile/tilegx.c
index 4e98100..66e025a 100644
--- a/drivers/net/ethernet/tile/tilegx.c
+++ b/drivers/net/ethernet/tile/tilegx.c
@@ -917,7 +917,7 @@
 	ingress_irq = rc;
 	tile_irq_activate(ingress_irq, TILE_IRQ_PERCPU);
 	rc = request_irq(ingress_irq, tile_net_handle_ingress_irq,
-			 0, NULL, NULL);
+			 0, "tile_net", NULL);
 	if (rc != 0) {
 		netdev_err(dev, "request_irq failed: %d\n", rc);
 		destroy_irq(ingress_irq);
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 1d04754..a788501 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -894,6 +894,8 @@
 	return IRQ_HANDLED;
 }
 
+static void axienet_dma_err_handler(unsigned long data);
+
 /**
  * axienet_open - Driver open routine.
  * @ndev:	Pointer to net_device structure
@@ -942,6 +944,10 @@
 		phy_start(lp->phy_dev);
 	}
 
+	/* Enable tasklets for Axi DMA error handling */
+	tasklet_init(&lp->dma_err_tasklet, axienet_dma_err_handler,
+		     (unsigned long) lp);
+
 	/* Enable interrupts for Axi DMA Tx */
 	ret = request_irq(lp->tx_irq, axienet_tx_irq, 0, ndev->name, ndev);
 	if (ret)
@@ -950,8 +956,7 @@
 	ret = request_irq(lp->rx_irq, axienet_rx_irq, 0, ndev->name, ndev);
 	if (ret)
 		goto err_rx_irq;
-	/* Enable tasklets for Axi DMA error handling */
-	tasklet_enable(&lp->dma_err_tasklet);
+
 	return 0;
 
 err_rx_irq:
@@ -960,6 +965,7 @@
 	if (lp->phy_dev)
 		phy_disconnect(lp->phy_dev);
 	lp->phy_dev = NULL;
+	tasklet_kill(&lp->dma_err_tasklet);
 	dev_err(lp->dev, "request_irq() failed\n");
 	return ret;
 }
@@ -1613,10 +1619,6 @@
 		goto err_iounmap_2;
 	}
 
-	tasklet_init(&lp->dma_err_tasklet, axienet_dma_err_handler,
-		     (unsigned long) lp);
-	tasklet_disable(&lp->dma_err_tasklet);
-
 	return 0;
 
 err_iounmap_2:
diff --git a/drivers/net/ethernet/xscale/ixp4xx_eth.c b/drivers/net/ethernet/xscale/ixp4xx_eth.c
index 98934bd..477d672 100644
--- a/drivers/net/ethernet/xscale/ixp4xx_eth.c
+++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c
@@ -1102,10 +1102,12 @@
 {
 	int i;
 
-	if (!ports_open)
-		if (!(dma_pool = dma_pool_create(DRV_NAME, NULL,
-						 POOL_ALLOC_SIZE, 32, 0)))
+	if (!ports_open) {
+		dma_pool = dma_pool_create(DRV_NAME, &port->netdev->dev,
+					   POOL_ALLOC_SIZE, 32, 0);
+		if (!dma_pool)
 			return -ENOMEM;
+	}
 
 	if (!(port->desc_tab = dma_pool_alloc(dma_pool, GFP_KERNEL,
 					      &port->desc_tab_phys)))
diff --git a/drivers/net/irda/sir_dev.c b/drivers/net/irda/sir_dev.c
index 5039f08..43e9ab4 100644
--- a/drivers/net/irda/sir_dev.c
+++ b/drivers/net/irda/sir_dev.c
@@ -222,7 +222,7 @@
 			break;
 
 		case SIRDEV_STATE_DONGLE_SPEED:
-			if (dev->dongle_drv->reset) {
+			if (dev->dongle_drv->set_speed) {
 				ret = dev->dongle_drv->set_speed(dev, fsm->param);
 				if (ret < 0) {
 					fsm->result = ret;
diff --git a/drivers/net/phy/mdio-bitbang.c b/drivers/net/phy/mdio-bitbang.c
index 6428fcb..daec9b0 100644
--- a/drivers/net/phy/mdio-bitbang.c
+++ b/drivers/net/phy/mdio-bitbang.c
@@ -234,7 +234,6 @@
 	struct mdiobb_ctrl *ctrl = bus->priv;
 
 	module_put(ctrl->ops->owner);
-	mdiobus_unregister(bus);
 	mdiobus_free(bus);
 }
 EXPORT_SYMBOL(free_mdio_bitbang);
diff --git a/drivers/net/phy/mdio-gpio.c b/drivers/net/phy/mdio-gpio.c
index 899274f..2ed1140 100644
--- a/drivers/net/phy/mdio-gpio.c
+++ b/drivers/net/phy/mdio-gpio.c
@@ -185,17 +185,20 @@
 {
 	struct mdio_gpio_platform_data *pdata;
 	struct mii_bus *new_bus;
-	int ret;
+	int ret, bus_id;
 
-	if (pdev->dev.of_node)
+	if (pdev->dev.of_node) {
 		pdata = mdio_gpio_of_get_data(pdev);
-	else
+		bus_id = of_alias_get_id(pdev->dev.of_node, "mdio-gpio");
+	} else {
 		pdata = pdev->dev.platform_data;
+		bus_id = pdev->id;
+	}
 
 	if (!pdata)
 		return -ENODEV;
 
-	new_bus = mdio_gpio_bus_init(&pdev->dev, pdata, pdev->id);
+	new_bus = mdio_gpio_bus_init(&pdev->dev, pdata, bus_id);
 	if (!new_bus)
 		return -ENODEV;
 
diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c
index d44cca3..ad86660 100644
--- a/drivers/net/team/team.c
+++ b/drivers/net/team/team.c
@@ -1794,10 +1794,12 @@
 
 	dev->features |= NETIF_F_LLTX;
 	dev->features |= NETIF_F_GRO;
-	dev->hw_features = NETIF_F_HW_VLAN_TX |
+	dev->hw_features = TEAM_VLAN_FEATURES |
+			   NETIF_F_HW_VLAN_TX |
 			   NETIF_F_HW_VLAN_RX |
 			   NETIF_F_HW_VLAN_FILTER;
 
+	dev->hw_features &= ~(NETIF_F_ALL_CSUM & ~NETIF_F_HW_CSUM);
 	dev->features |= dev->hw_features;
 }
 
diff --git a/drivers/net/team/team_mode_broadcast.c b/drivers/net/team/team_mode_broadcast.c
index 9db0171..c5db428 100644
--- a/drivers/net/team/team_mode_broadcast.c
+++ b/drivers/net/team/team_mode_broadcast.c
@@ -29,8 +29,8 @@
 			if (last) {
 				skb2 = skb_clone(skb, GFP_ATOMIC);
 				if (skb2) {
-					ret = team_dev_queue_xmit(team, last,
-								  skb2);
+					ret = !team_dev_queue_xmit(team, last,
+								   skb2);
 					if (!sum_ret)
 						sum_ret = ret;
 				}
@@ -39,7 +39,7 @@
 		}
 	}
 	if (last) {
-		ret = team_dev_queue_xmit(team, last, skb);
+		ret = !team_dev_queue_xmit(team, last, skb);
 		if (!sum_ret)
 			sum_ret = ret;
 	}
diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c
index 4cd582a..74fab1a 100644
--- a/drivers/net/usb/cdc_ncm.c
+++ b/drivers/net/usb/cdc_ncm.c
@@ -540,10 +540,12 @@
 	    (ctx->ether_desc == NULL) || (ctx->control != intf))
 		goto error;
 
-	/* claim interfaces, if any */
-	temp = usb_driver_claim_interface(driver, ctx->data, dev);
-	if (temp)
-		goto error;
+	/* claim data interface, if different from control */
+	if (ctx->data != ctx->control) {
+		temp = usb_driver_claim_interface(driver, ctx->data, dev);
+		if (temp)
+			goto error;
+	}
 
 	iface_no = ctx->data->cur_altsetting->desc.bInterfaceNumber;
 
@@ -623,6 +625,10 @@
 
 	tasklet_kill(&ctx->bh);
 
+	/* handle devices with combined control and data interface */
+	if (ctx->control == ctx->data)
+		ctx->data = NULL;
+
 	/* disconnect master --> disconnect slave */
 	if (intf == ctx->control && ctx->data) {
 		usb_set_intfdata(ctx->data, NULL);
@@ -1245,6 +1251,14 @@
 	  .driver_info = (unsigned long) &wwan_info,
 	},
 
+	/* Huawei NCM devices disguised as vendor specific */
+	{ USB_VENDOR_AND_INTERFACE_INFO(0x12d1, 0xff, 0x02, 0x16),
+	  .driver_info = (unsigned long)&wwan_info,
+	},
+	{ USB_VENDOR_AND_INTERFACE_INFO(0x12d1, 0xff, 0x02, 0x46),
+	  .driver_info = (unsigned long)&wwan_info,
+	},
+
 	/* Generic CDC-NCM devices */
 	{ USB_INTERFACE_INFO(USB_CLASS_COMM,
 		USB_CDC_SUBCLASS_NCM, USB_CDC_PROTO_NONE),
diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index 3b566fa..1ea91f4 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -385,6 +385,7 @@
 	},
 
 	/* 3. Combined interface devices matching on interface number */
+	{QMI_FIXED_INTF(0x12d1, 0x140c, 1)},	/* Huawei E173 */
 	{QMI_FIXED_INTF(0x19d2, 0x0002, 1)},
 	{QMI_FIXED_INTF(0x19d2, 0x0012, 1)},
 	{QMI_FIXED_INTF(0x19d2, 0x0017, 3)},
diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c
index 3286166..362cb8c 100644
--- a/drivers/net/usb/smsc95xx.c
+++ b/drivers/net/usb/smsc95xx.c
@@ -184,7 +184,7 @@
 	/* set the address, index & direction (read from PHY) */
 	phy_id &= dev->mii.phy_id_mask;
 	idx &= dev->mii.reg_num_mask;
-	addr = (phy_id << 11) | (idx << 6) | MII_READ_;
+	addr = (phy_id << 11) | (idx << 6) | MII_READ_ | MII_BUSY_;
 	ret = smsc95xx_write_reg(dev, MII_ADDR, addr);
 	check_warn_goto_done(ret, "Error writing MII_ADDR");
 
@@ -221,7 +221,7 @@
 	/* set the address, index & direction (write to PHY) */
 	phy_id &= dev->mii.phy_id_mask;
 	idx &= dev->mii.reg_num_mask;
-	addr = (phy_id << 11) | (idx << 6) | MII_WRITE_;
+	addr = (phy_id << 11) | (idx << 6) | MII_WRITE_ | MII_BUSY_;
 	ret = smsc95xx_write_reg(dev, MII_ADDR, addr);
 	check_warn_goto_done(ret, "Error writing MII_ADDR");
 
diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c
index 7b4adde..8b5c619 100644
--- a/drivers/net/vxlan.c
+++ b/drivers/net/vxlan.c
@@ -1,5 +1,5 @@
 /*
- * VXLAN: Virtual eXtensiable Local Area Network
+ * VXLAN: Virtual eXtensible Local Area Network
  *
  * Copyright (c) 2012 Vyatta Inc.
  *
@@ -50,8 +50,8 @@
 
 #define VXLAN_N_VID	(1u << 24)
 #define VXLAN_VID_MASK	(VXLAN_N_VID - 1)
-/* VLAN + IP header + UDP + VXLAN */
-#define VXLAN_HEADROOM (4 + 20 + 8 + 8)
+/* IP header + UDP + VXLAN + Ethernet header */
+#define VXLAN_HEADROOM (20 + 8 + 8 + 14)
 
 #define VXLAN_FLAGS 0x08000000	/* struct vxlanhdr.vx_flags required value. */
 
@@ -1102,6 +1102,10 @@
 
 		if (!tb[IFLA_MTU])
 			dev->mtu = lowerdev->mtu - VXLAN_HEADROOM;
+
+		/* update header length based on lower device */
+		dev->hard_header_len = lowerdev->hard_header_len +
+				       VXLAN_HEADROOM;
 	}
 
 	if (data[IFLA_VXLAN_TOS])
diff --git a/drivers/net/wan/ixp4xx_hss.c b/drivers/net/wan/ixp4xx_hss.c
index 3f575af..760776b 100644
--- a/drivers/net/wan/ixp4xx_hss.c
+++ b/drivers/net/wan/ixp4xx_hss.c
@@ -969,10 +969,12 @@
 {
 	int i;
 
-	if (!ports_open)
-		if (!(dma_pool = dma_pool_create(DRV_NAME, NULL,
-						 POOL_ALLOC_SIZE, 32, 0)))
+	if (!ports_open) {
+		dma_pool = dma_pool_create(DRV_NAME, &port->netdev->dev,
+					   POOL_ALLOC_SIZE, 32, 0);
+		if (!dma_pool)
 			return -ENOMEM;
+	}
 
 	if (!(port->desc_tab = dma_pool_alloc(dma_pool, GFP_KERNEL,
 					      &port->desc_tab_phys)))
@@ -1363,7 +1365,7 @@
 
 	platform_set_drvdata(pdev, port);
 
-	netdev_info(dev, "HSS-%i\n", port->id);
+	netdev_info(dev, "initialized\n");
 	return 0;
 
 err_free_netdev:
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 8e1559a..1829b44 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -1456,7 +1456,7 @@
 	switch (type) {
 	case ATH9K_RESET_POWER_ON:
 		ret = ath9k_hw_set_reset_power_on(ah);
-		if (!ret)
+		if (ret)
 			ah->reset_power_on = true;
 		break;
 	case ATH9K_RESET_WARM:
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
index a6f1e81..481345c 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
@@ -4401,7 +4401,7 @@
 
 static void brcmf_wiphy_pno_params(struct wiphy *wiphy)
 {
-#ifndef CONFIG_BRCMFISCAN
+#ifndef CONFIG_BRCMISCAN
 	/* scheduled scan settings */
 	wiphy->max_sched_scan_ssids = BRCMF_PNO_MAX_PFN_COUNT;
 	wiphy->max_match_sets = BRCMF_PNO_MAX_PFN_COUNT;
diff --git a/drivers/net/wireless/iwlwifi/dvm/mac80211.c b/drivers/net/wireless/iwlwifi/dvm/mac80211.c
index ff8162d..2d9eee9 100644
--- a/drivers/net/wireless/iwlwifi/dvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/dvm/mac80211.c
@@ -521,7 +521,7 @@
 		     ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate);
 
 	if (iwlagn_tx_skb(priv, control->sta, skb))
-		dev_kfree_skb_any(skb);
+		ieee80211_free_txskb(hw, skb);
 }
 
 static void iwlagn_mac_update_tkip_key(struct ieee80211_hw *hw,
@@ -1354,6 +1354,20 @@
 	vif_priv->ctx = ctx;
 	ctx->vif = vif;
 
+	/*
+	 * In SNIFFER device type, the firmware reports the FCS to
+	 * the host, rather than snipping it off. Unfortunately,
+	 * mac80211 doesn't (yet) provide a per-packet flag for
+	 * this, so that we have to set the hardware flag based
+	 * on the interfaces added. As the monitor interface can
+	 * only be present by itself, and will be removed before
+	 * other interfaces are added, this is safe.
+	 */
+	if (vif->type == NL80211_IFTYPE_MONITOR)
+		priv->hw->flags |= IEEE80211_HW_RX_INCLUDES_FCS;
+	else
+		priv->hw->flags &= ~IEEE80211_HW_RX_INCLUDES_FCS;
+
 	err = iwl_setup_interface(priv, ctx);
 	if (!err || reset)
 		goto out;
diff --git a/drivers/net/wireless/iwlwifi/dvm/main.c b/drivers/net/wireless/iwlwifi/dvm/main.c
index 7ff3f14..408132c 100644
--- a/drivers/net/wireless/iwlwifi/dvm/main.c
+++ b/drivers/net/wireless/iwlwifi/dvm/main.c
@@ -2114,7 +2114,7 @@
 
 	info = IEEE80211_SKB_CB(skb);
 	iwl_trans_free_tx_cmd(priv->trans, info->driver_data[1]);
-	dev_kfree_skb_any(skb);
+	ieee80211_free_txskb(priv->hw, skb);
 }
 
 static void iwl_set_hw_rfkill_state(struct iwl_op_mode *op_mode, bool state)
diff --git a/drivers/net/wireless/iwlwifi/dvm/rxon.c b/drivers/net/wireless/iwlwifi/dvm/rxon.c
index 1089639..2830ea2 100644
--- a/drivers/net/wireless/iwlwifi/dvm/rxon.c
+++ b/drivers/net/wireless/iwlwifi/dvm/rxon.c
@@ -1012,12 +1012,12 @@
 	 * As a consequence, it's not as complicated as it sounds, just add
 	 * any lower rates to the ACK rate bitmap.
 	 */
-	if (IWL_RATE_11M_INDEX < lowest_present_ofdm)
-		ofdm |= IWL_RATE_11M_MASK >> IWL_FIRST_CCK_RATE;
-	if (IWL_RATE_5M_INDEX < lowest_present_ofdm)
-		ofdm |= IWL_RATE_5M_MASK >> IWL_FIRST_CCK_RATE;
-	if (IWL_RATE_2M_INDEX < lowest_present_ofdm)
-		ofdm |= IWL_RATE_2M_MASK >> IWL_FIRST_CCK_RATE;
+	if (IWL_RATE_11M_INDEX < lowest_present_cck)
+		cck |= IWL_RATE_11M_MASK >> IWL_FIRST_CCK_RATE;
+	if (IWL_RATE_5M_INDEX < lowest_present_cck)
+		cck |= IWL_RATE_5M_MASK >> IWL_FIRST_CCK_RATE;
+	if (IWL_RATE_2M_INDEX < lowest_present_cck)
+		cck |= IWL_RATE_2M_MASK >> IWL_FIRST_CCK_RATE;
 	/* 1M already there or needed so always add */
 	cck |= IWL_RATE_1M_MASK >> IWL_FIRST_CCK_RATE;
 
diff --git a/drivers/net/wireless/iwlwifi/pcie/rx.c b/drivers/net/wireless/iwlwifi/pcie/rx.c
index 17c8e5d..bb69f8f 100644
--- a/drivers/net/wireless/iwlwifi/pcie/rx.c
+++ b/drivers/net/wireless/iwlwifi/pcie/rx.c
@@ -321,6 +321,14 @@
 			dma_map_page(trans->dev, page, 0,
 				     PAGE_SIZE << trans_pcie->rx_page_order,
 				     DMA_FROM_DEVICE);
+		if (dma_mapping_error(trans->dev, rxb->page_dma)) {
+			rxb->page = NULL;
+			spin_lock_irqsave(&rxq->lock, flags);
+			list_add(&rxb->list, &rxq->rx_used);
+			spin_unlock_irqrestore(&rxq->lock, flags);
+			__free_pages(page, trans_pcie->rx_page_order);
+			return;
+		}
 		/* dma address must be no more than 36 bits */
 		BUG_ON(rxb->page_dma & ~DMA_BIT_MASK(36));
 		/* and also 256 byte aligned! */
@@ -488,8 +496,19 @@
 			dma_map_page(trans->dev, rxb->page, 0,
 				     PAGE_SIZE << trans_pcie->rx_page_order,
 				     DMA_FROM_DEVICE);
-		list_add_tail(&rxb->list, &rxq->rx_free);
-		rxq->free_count++;
+		if (dma_mapping_error(trans->dev, rxb->page_dma)) {
+			/*
+			 * free the page(s) as well to not break
+			 * the invariant that the items on the used
+			 * list have no page(s)
+			 */
+			__free_pages(rxb->page, trans_pcie->rx_page_order);
+			rxb->page = NULL;
+			list_add_tail(&rxb->list, &rxq->rx_used);
+		} else {
+			list_add_tail(&rxb->list, &rxq->rx_free);
+			rxq->free_count++;
+		}
 	} else
 		list_add_tail(&rxb->list, &rxq->rx_used);
 	spin_unlock_irqrestore(&rxq->lock, flags);
diff --git a/drivers/net/wireless/iwlwifi/pcie/tx.c b/drivers/net/wireless/iwlwifi/pcie/tx.c
index 105e3af..79a4ddc 100644
--- a/drivers/net/wireless/iwlwifi/pcie/tx.c
+++ b/drivers/net/wireless/iwlwifi/pcie/tx.c
@@ -480,20 +480,12 @@
 void iwl_trans_pcie_txq_disable(struct iwl_trans *trans, int txq_id)
 {
 	struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
-	u16 rd_ptr, wr_ptr;
-	int n_bd = trans_pcie->txq[txq_id].q.n_bd;
 
 	if (!test_and_clear_bit(txq_id, trans_pcie->queue_used)) {
 		WARN_ONCE(1, "queue %d not used", txq_id);
 		return;
 	}
 
-	rd_ptr = iwl_read_prph(trans, SCD_QUEUE_RDPTR(txq_id)) & (n_bd - 1);
-	wr_ptr = iwl_read_prph(trans, SCD_QUEUE_WRPTR(txq_id));
-
-	WARN_ONCE(rd_ptr != wr_ptr, "queue %d isn't empty: [%d,%d]",
-		  txq_id, rd_ptr, wr_ptr);
-
 	iwl_txq_set_inactive(trans, txq_id);
 	IWL_DEBUG_TX_QUEUES(trans, "Deactivate queue %d\n", txq_id);
 }
diff --git a/drivers/net/wireless/mwifiex/cmdevt.c b/drivers/net/wireless/mwifiex/cmdevt.c
index 8d46510..ae9010e 100644
--- a/drivers/net/wireless/mwifiex/cmdevt.c
+++ b/drivers/net/wireless/mwifiex/cmdevt.c
@@ -890,9 +890,6 @@
 		return;
 	}
 	cmd_node = adapter->curr_cmd;
-	if (cmd_node->wait_q_enabled)
-		adapter->cmd_wait_q.status = -ETIMEDOUT;
-
 	if (cmd_node) {
 		adapter->dbg.timeout_cmd_id =
 			adapter->dbg.last_cmd_id[adapter->dbg.last_cmd_index];
@@ -938,6 +935,14 @@
 
 		dev_err(adapter->dev, "ps_mode=%d ps_state=%d\n",
 			adapter->ps_mode, adapter->ps_state);
+
+		if (cmd_node->wait_q_enabled) {
+			adapter->cmd_wait_q.status = -ETIMEDOUT;
+			wake_up_interruptible(&adapter->cmd_wait_q.wait);
+			mwifiex_cancel_pending_ioctl(adapter);
+			/* reset cmd_sent flag to unblock new commands */
+			adapter->cmd_sent = false;
+		}
 	}
 	if (adapter->hw_status == MWIFIEX_HW_STATUS_INITIALIZING)
 		mwifiex_init_fw_complete(adapter);
diff --git a/drivers/net/wireless/mwifiex/sdio.c b/drivers/net/wireless/mwifiex/sdio.c
index fc8a9bf..82cf0fa 100644
--- a/drivers/net/wireless/mwifiex/sdio.c
+++ b/drivers/net/wireless/mwifiex/sdio.c
@@ -161,7 +161,6 @@
 	struct sdio_mmc_card *card;
 	struct mwifiex_adapter *adapter;
 	mmc_pm_flag_t pm_flag = 0;
-	int hs_actived = 0;
 	int i;
 	int ret = 0;
 
@@ -188,12 +187,14 @@
 	adapter = card->adapter;
 
 	/* Enable the Host Sleep */
-	hs_actived = mwifiex_enable_hs(adapter);
-	if (hs_actived) {
-		pr_debug("cmd: suspend with MMC_PM_KEEP_POWER\n");
-		ret = sdio_set_host_pm_flags(func, MMC_PM_KEEP_POWER);
+	if (!mwifiex_enable_hs(adapter)) {
+		dev_err(adapter->dev, "cmd: failed to suspend\n");
+		return -EFAULT;
 	}
 
+	dev_dbg(adapter->dev, "cmd: suspend with MMC_PM_KEEP_POWER\n");
+	ret = sdio_set_host_pm_flags(func, MMC_PM_KEEP_POWER);
+
 	/* Indicate device suspended */
 	adapter->is_suspended = true;
 
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
index 9970c2b..b7e6607 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
@@ -297,6 +297,7 @@
 	/*=== Customer ID ===*/
 	/****** 8188CU ********/
 	{RTL_USB_DEVICE(0x050d, 0x1102, rtl92cu_hal_cfg)}, /*Belkin - Edimax*/
+	{RTL_USB_DEVICE(0x050d, 0x11f2, rtl92cu_hal_cfg)}, /*Belkin - ISY*/
 	{RTL_USB_DEVICE(0x06f8, 0xe033, rtl92cu_hal_cfg)}, /*Hercules - Edimax*/
 	{RTL_USB_DEVICE(0x07b8, 0x8188, rtl92cu_hal_cfg)}, /*Abocom - Abocom*/
 	{RTL_USB_DEVICE(0x07b8, 0x8189, rtl92cu_hal_cfg)}, /*Funai - Abocom*/
diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c
index caa0110..fc24eb9 100644
--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -452,29 +452,85 @@
 	/* Grant backend access to each skb fragment page. */
 	for (i = 0; i < frags; i++) {
 		skb_frag_t *frag = skb_shinfo(skb)->frags + i;
+		struct page *page = skb_frag_page(frag);
 
-		tx->flags |= XEN_NETTXF_more_data;
+		len = skb_frag_size(frag);
+		offset = frag->page_offset;
 
-		id = get_id_from_freelist(&np->tx_skb_freelist, np->tx_skbs);
-		np->tx_skbs[id].skb = skb_get(skb);
-		tx = RING_GET_REQUEST(&np->tx, prod++);
-		tx->id = id;
-		ref = gnttab_claim_grant_reference(&np->gref_tx_head);
-		BUG_ON((signed short)ref < 0);
+		/* Data must not cross a page boundary. */
+		BUG_ON(len + offset > PAGE_SIZE<<compound_order(page));
 
-		mfn = pfn_to_mfn(page_to_pfn(skb_frag_page(frag)));
-		gnttab_grant_foreign_access_ref(ref, np->xbdev->otherend_id,
-						mfn, GNTMAP_readonly);
+		/* Skip unused frames from start of page */
+		page += offset >> PAGE_SHIFT;
+		offset &= ~PAGE_MASK;
 
-		tx->gref = np->grant_tx_ref[id] = ref;
-		tx->offset = frag->page_offset;
-		tx->size = skb_frag_size(frag);
-		tx->flags = 0;
+		while (len > 0) {
+			unsigned long bytes;
+
+			BUG_ON(offset >= PAGE_SIZE);
+
+			bytes = PAGE_SIZE - offset;
+			if (bytes > len)
+				bytes = len;
+
+			tx->flags |= XEN_NETTXF_more_data;
+
+			id = get_id_from_freelist(&np->tx_skb_freelist,
+						  np->tx_skbs);
+			np->tx_skbs[id].skb = skb_get(skb);
+			tx = RING_GET_REQUEST(&np->tx, prod++);
+			tx->id = id;
+			ref = gnttab_claim_grant_reference(&np->gref_tx_head);
+			BUG_ON((signed short)ref < 0);
+
+			mfn = pfn_to_mfn(page_to_pfn(page));
+			gnttab_grant_foreign_access_ref(ref,
+							np->xbdev->otherend_id,
+							mfn, GNTMAP_readonly);
+
+			tx->gref = np->grant_tx_ref[id] = ref;
+			tx->offset = offset;
+			tx->size = bytes;
+			tx->flags = 0;
+
+			offset += bytes;
+			len -= bytes;
+
+			/* Next frame */
+			if (offset == PAGE_SIZE && len) {
+				BUG_ON(!PageCompound(page));
+				page++;
+				offset = 0;
+			}
+		}
 	}
 
 	np->tx.req_prod_pvt = prod;
 }
 
+/*
+ * Count how many ring slots are required to send the frags of this
+ * skb. Each frag might be a compound page.
+ */
+static int xennet_count_skb_frag_slots(struct sk_buff *skb)
+{
+	int i, frags = skb_shinfo(skb)->nr_frags;
+	int pages = 0;
+
+	for (i = 0; i < frags; i++) {
+		skb_frag_t *frag = skb_shinfo(skb)->frags + i;
+		unsigned long size = skb_frag_size(frag);
+		unsigned long offset = frag->page_offset;
+
+		/* Skip unused frames from start of page */
+		offset &= ~PAGE_MASK;
+
+		pages += PFN_UP(offset + size);
+	}
+
+	return pages;
+}
+
 static int xennet_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	unsigned short id;
@@ -487,23 +543,23 @@
 	grant_ref_t ref;
 	unsigned long mfn;
 	int notify;
-	int frags = skb_shinfo(skb)->nr_frags;
+	int slots;
 	unsigned int offset = offset_in_page(data);
 	unsigned int len = skb_headlen(skb);
 	unsigned long flags;
 
-	frags += DIV_ROUND_UP(offset + len, PAGE_SIZE);
-	if (unlikely(frags > MAX_SKB_FRAGS + 1)) {
-		printk(KERN_ALERT "xennet: skb rides the rocket: %d frags\n",
-		       frags);
-		dump_stack();
+	slots = DIV_ROUND_UP(offset + len, PAGE_SIZE) +
+		xennet_count_skb_frag_slots(skb);
+	if (unlikely(slots > MAX_SKB_FRAGS + 1)) {
+		net_alert_ratelimited(
+			"xennet: skb rides the rocket: %d slots\n", slots);
 		goto drop;
 	}
 
 	spin_lock_irqsave(&np->tx_lock, flags);
 
 	if (unlikely(!netif_carrier_ok(dev) ||
-		     (frags > 1 && !xennet_can_sg(dev)) ||
+		     (slots > 1 && !xennet_can_sg(dev)) ||
 		     netif_needs_gso(skb, netif_skb_features(skb)))) {
 		spin_unlock_irqrestore(&np->tx_lock, flags);
 		goto drop;
diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c
index 97c440a..30ae18a 100644
--- a/drivers/nfc/pn533.c
+++ b/drivers/nfc/pn533.c
@@ -698,13 +698,14 @@
 
 	cmd = list_first_entry(&dev->cmd_queue, struct pn533_cmd, queue);
 
+	list_del(&cmd->queue);
+
 	mutex_unlock(&dev->cmd_lock);
 
 	__pn533_send_cmd_frame_async(dev, cmd->out_frame, cmd->in_frame,
 				     cmd->in_frame_len, cmd->cmd_complete,
 				     cmd->arg, cmd->flags);
 
-	list_del(&cmd->queue);
 	kfree(cmd);
 }
 
@@ -1678,11 +1679,14 @@
 static int pn533_in_dep_link_up_complete(struct pn533 *dev, void *arg,
 						u8 *params, int params_len)
 {
-	struct pn533_cmd_jump_dep *cmd;
 	struct pn533_cmd_jump_dep_response *resp;
 	struct nfc_target nfc_target;
 	u8 target_gt_len;
 	int rc;
+	struct pn533_cmd_jump_dep *cmd = (struct pn533_cmd_jump_dep *)arg;
+	u8 active = cmd->active;
+
+	kfree(arg);
 
 	if (params_len == -ENOENT) {
 		nfc_dev_dbg(&dev->interface->dev, "");
@@ -1704,7 +1708,6 @@
 	}
 
 	resp = (struct pn533_cmd_jump_dep_response *) params;
-	cmd = (struct pn533_cmd_jump_dep *) arg;
 	rc = resp->status & PN533_CMD_RET_MASK;
 	if (rc != PN533_CMD_RET_SUCCESS) {
 		nfc_dev_err(&dev->interface->dev,
@@ -1734,7 +1737,7 @@
 	if (rc == 0)
 		rc = nfc_dep_link_is_up(dev->nfc_dev,
 						dev->nfc_dev->targets[0].idx,
-						!cmd->active, NFC_RF_INITIATOR);
+						!active, NFC_RF_INITIATOR);
 
 	return 0;
 }
@@ -1819,12 +1822,8 @@
 	rc = pn533_send_cmd_frame_async(dev, dev->out_frame, dev->in_frame,
 				dev->in_maxlen,	pn533_in_dep_link_up_complete,
 				cmd, GFP_KERNEL);
-	if (rc)
-		goto out;
-
-
-out:
-	kfree(cmd);
+	if (rc < 0)
+		kfree(cmd);
 
 	return rc;
 }
@@ -2078,8 +2077,12 @@
 static int pn533_tm_send_complete(struct pn533 *dev, void *arg,
 				  u8 *params, int params_len)
 {
+	struct sk_buff *skb_out = arg;
+
 	nfc_dev_dbg(&dev->interface->dev, "%s", __func__);
 
+	dev_kfree_skb(skb_out);
+
 	if (params_len < 0) {
 		nfc_dev_err(&dev->interface->dev,
 			    "Error %d when sending data",
@@ -2117,7 +2120,7 @@
 
 	rc = pn533_send_cmd_frame_async(dev, out_frame, dev->in_frame,
 					dev->in_maxlen, pn533_tm_send_complete,
-					NULL, GFP_KERNEL);
+					skb, GFP_KERNEL);
 	if (rc) {
 		nfc_dev_err(&dev->interface->dev,
 			    "Error %d when trying to send data", rc);
diff --git a/drivers/of/base.c b/drivers/of/base.c
index af3b22a..538e3cf 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -45,7 +45,8 @@
 
 static LIST_HEAD(aliases_lookup);
 
-struct device_node *allnodes;
+struct device_node *of_allnodes;
+EXPORT_SYMBOL(of_allnodes);
 struct device_node *of_chosen;
 struct device_node *of_aliases;
 
@@ -199,7 +200,7 @@
 	struct device_node *np;
 
 	read_lock(&devtree_lock);
-	np = prev ? prev->allnext : allnodes;
+	np = prev ? prev->allnext : of_allnodes;
 	for (; np != NULL; np = np->allnext)
 		if (of_node_get(np))
 			break;
@@ -422,7 +423,7 @@
  */
 struct device_node *of_find_node_by_path(const char *path)
 {
-	struct device_node *np = allnodes;
+	struct device_node *np = of_allnodes;
 
 	read_lock(&devtree_lock);
 	for (; np; np = np->allnext) {
@@ -452,7 +453,7 @@
 	struct device_node *np;
 
 	read_lock(&devtree_lock);
-	np = from ? from->allnext : allnodes;
+	np = from ? from->allnext : of_allnodes;
 	for (; np; np = np->allnext)
 		if (np->name && (of_node_cmp(np->name, name) == 0)
 		    && of_node_get(np))
@@ -481,7 +482,7 @@
 	struct device_node *np;
 
 	read_lock(&devtree_lock);
-	np = from ? from->allnext : allnodes;
+	np = from ? from->allnext : of_allnodes;
 	for (; np; np = np->allnext)
 		if (np->type && (of_node_cmp(np->type, type) == 0)
 		    && of_node_get(np))
@@ -512,7 +513,7 @@
 	struct device_node *np;
 
 	read_lock(&devtree_lock);
-	np = from ? from->allnext : allnodes;
+	np = from ? from->allnext : of_allnodes;
 	for (; np; np = np->allnext) {
 		if (type
 		    && !(np->type && (of_node_cmp(np->type, type) == 0)))
@@ -545,7 +546,7 @@
 	struct property *pp;
 
 	read_lock(&devtree_lock);
-	np = from ? from->allnext : allnodes;
+	np = from ? from->allnext : of_allnodes;
 	for (; np; np = np->allnext) {
 		for (pp = np->properties; pp; pp = pp->next) {
 			if (of_prop_cmp(pp->name, prop_name) == 0) {
@@ -594,27 +595,35 @@
 EXPORT_SYMBOL(of_match_node);
 
 /**
- *	of_find_matching_node - Find a node based on an of_device_id match
- *				table.
+ *	of_find_matching_node_and_match - Find a node based on an of_device_id
+ *					  match table.
  *	@from:		The node to start searching from or NULL, the node
  *			you pass will not be searched, only the next one
  *			will; typically, you pass what the previous call
  *			returned. of_node_put() will be called on it
  *	@matches:	array of of device match structures to search in
+ *	@match		Updated to point at the matches entry which matched
  *
  *	Returns a node pointer with refcount incremented, use
  *	of_node_put() on it when done.
  */
-struct device_node *of_find_matching_node(struct device_node *from,
-					  const struct of_device_id *matches)
+struct device_node *of_find_matching_node_and_match(struct device_node *from,
+					const struct of_device_id *matches,
+					const struct of_device_id **match)
 {
 	struct device_node *np;
 
+	if (match)
+		*match = NULL;
+
 	read_lock(&devtree_lock);
-	np = from ? from->allnext : allnodes;
+	np = from ? from->allnext : of_allnodes;
 	for (; np; np = np->allnext) {
-		if (of_match_node(matches, np) && of_node_get(np))
+		if (of_match_node(matches, np) && of_node_get(np)) {
+			if (match)
+				*match = matches;
 			break;
+		}
 	}
 	of_node_put(from);
 	read_unlock(&devtree_lock);
@@ -661,7 +670,7 @@
 	struct device_node *np;
 
 	read_lock(&devtree_lock);
-	for (np = allnodes; np; np = np->allnext)
+	for (np = of_allnodes; np; np = np->allnext)
 		if (np->phandle == handle)
 			break;
 	of_node_get(np);
@@ -671,12 +680,89 @@
 EXPORT_SYMBOL(of_find_node_by_phandle);
 
 /**
+ * of_property_read_u8_array - Find and read an array of u8 from a property.
+ *
+ * @np:		device node from which the property value is to be read.
+ * @propname:	name of the property to be searched.
+ * @out_value:	pointer to return value, modified only if return value is 0.
+ * @sz:		number of array elements to read
+ *
+ * Search for a property in a device node and read 8-bit value(s) from
+ * it. Returns 0 on success, -EINVAL if the property does not exist,
+ * -ENODATA if property does not have a value, and -EOVERFLOW if the
+ * property data isn't large enough.
+ *
+ * dts entry of array should be like:
+ *	property = /bits/ 8 <0x50 0x60 0x70>;
+ *
+ * The out_value is modified only if a valid u8 value can be decoded.
+ */
+int of_property_read_u8_array(const struct device_node *np,
+			const char *propname, u8 *out_values, size_t sz)
+{
+	struct property *prop = of_find_property(np, propname, NULL);
+	const u8 *val;
+
+	if (!prop)
+		return -EINVAL;
+	if (!prop->value)
+		return -ENODATA;
+	if ((sz * sizeof(*out_values)) > prop->length)
+		return -EOVERFLOW;
+
+	val = prop->value;
+	while (sz--)
+		*out_values++ = *val++;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(of_property_read_u8_array);
+
+/**
+ * of_property_read_u16_array - Find and read an array of u16 from a property.
+ *
+ * @np:		device node from which the property value is to be read.
+ * @propname:	name of the property to be searched.
+ * @out_value:	pointer to return value, modified only if return value is 0.
+ * @sz:		number of array elements to read
+ *
+ * Search for a property in a device node and read 16-bit value(s) from
+ * it. Returns 0 on success, -EINVAL if the property does not exist,
+ * -ENODATA if property does not have a value, and -EOVERFLOW if the
+ * property data isn't large enough.
+ *
+ * dts entry of array should be like:
+ *	property = /bits/ 16 <0x5000 0x6000 0x7000>;
+ *
+ * The out_value is modified only if a valid u16 value can be decoded.
+ */
+int of_property_read_u16_array(const struct device_node *np,
+			const char *propname, u16 *out_values, size_t sz)
+{
+	struct property *prop = of_find_property(np, propname, NULL);
+	const __be16 *val;
+
+	if (!prop)
+		return -EINVAL;
+	if (!prop->value)
+		return -ENODATA;
+	if ((sz * sizeof(*out_values)) > prop->length)
+		return -EOVERFLOW;
+
+	val = prop->value;
+	while (sz--)
+		*out_values++ = be16_to_cpup(val++);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(of_property_read_u16_array);
+
+/**
  * of_property_read_u32_array - Find and read an array of 32 bit integers
  * from a property.
  *
  * @np:		device node from which the property value is to be read.
  * @propname:	name of the property to be searched.
  * @out_value:	pointer to return value, modified only if return value is 0.
+ * @sz:		number of array elements to read
  *
  * Search for a property in a device node and read 32-bit value(s) from
  * it. Returns 0 on success, -EINVAL if the property does not exist,
@@ -893,8 +979,8 @@
  * Returns the device_node pointer with refcount incremented.  Use
  * of_node_put() on it when done.
  */
-struct device_node *
-of_parse_phandle(struct device_node *np, const char *phandle_name, int index)
+struct device_node *of_parse_phandle(const struct device_node *np,
+				     const char *phandle_name, int index)
 {
 	const __be32 *phandle;
 	int size;
@@ -1169,9 +1255,9 @@
 
 	write_lock_irqsave(&devtree_lock, flags);
 	np->sibling = np->parent->child;
-	np->allnext = allnodes;
+	np->allnext = of_allnodes;
 	np->parent->child = np;
-	allnodes = np;
+	of_allnodes = np;
 	write_unlock_irqrestore(&devtree_lock, flags);
 }
 
@@ -1192,11 +1278,11 @@
 	if (!parent)
 		goto out_unlock;
 
-	if (allnodes == np)
-		allnodes = np->allnext;
+	if (of_allnodes == np)
+		of_allnodes = np->allnext;
 	else {
 		struct device_node *prev;
-		for (prev = allnodes;
+		for (prev = of_allnodes;
 		     prev->allnext != np;
 		     prev = prev->allnext)
 			;
diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
index 91a375f..a65c39c 100644
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -186,6 +186,8 @@
 			 */
 			fpsize = 1;
 			allocl = 2;
+			l = 1;
+			*pathp = '\0';
 		} else {
 			/* account for '/' and path size minus terminal 0
 			 * already in 'l'
@@ -198,10 +200,10 @@
 	np = unflatten_dt_alloc(&mem, sizeof(struct device_node) + allocl,
 				__alignof__(struct device_node));
 	if (allnextpp) {
+		char *fn;
 		memset(np, 0, sizeof(*np));
-		np->full_name = ((char *)np) + sizeof(struct device_node);
+		np->full_name = fn = ((char *)np) + sizeof(*np);
 		if (new_format) {
-			char *fn = np->full_name;
 			/* rebuild full path for new format */
 			if (dad && dad->parent) {
 				strcpy(fn, dad->full_name);
@@ -215,9 +217,9 @@
 				fn += strlen(fn);
 			}
 			*(fn++) = '/';
-			memcpy(fn, pathp, l);
-		} else
-			memcpy(np->full_name, pathp, l);
+		}
+		memcpy(fn, pathp, l);
+
 		prev_pp = &np->properties;
 		**allnextpp = np;
 		*allnextpp = &np->allnext;
@@ -459,7 +461,7 @@
 
 	do {
 		u32 tag = be32_to_cpup((__be32 *)p);
-		char *pathp;
+		const char *pathp;
 
 		p += 4;
 		if (tag == OF_DT_END_NODE) {
@@ -487,7 +489,7 @@
 		pathp = (char *)p;
 		p = ALIGN(p + strlen(pathp) + 1, 4);
 		if ((*pathp) == '/') {
-			char *lp, *np;
+			const char *lp, *np;
 			for (lp = NULL, np = pathp; *np; np++)
 				if ((*np) == '/')
 					lp = np+1;
@@ -710,7 +712,7 @@
  */
 void __init unflatten_device_tree(void)
 {
-	__unflatten_device_tree(initial_boot_params, &allnodes,
+	__unflatten_device_tree(initial_boot_params, &of_allnodes,
 				early_init_dt_alloc_memory_arch);
 
 	/* Get pointer to "/chosen" and "/aliasas" nodes for use everywhere */
diff --git a/drivers/of/of_i2c.c b/drivers/of/of_i2c.c
index 3550f3b..b667264 100644
--- a/drivers/of/of_i2c.c
+++ b/drivers/of/of_i2c.c
@@ -29,7 +29,7 @@
 
 	dev_dbg(&adap->dev, "of_i2c: walking child nodes\n");
 
-	for_each_child_of_node(adap->dev.of_node, node) {
+	for_each_available_child_of_node(adap->dev.of_node, node) {
 		struct i2c_board_info info = {};
 		struct dev_archdata dev_ad = {};
 		const __be32 *addr;
diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c
index 8e6c25f..83ca06f 100644
--- a/drivers/of/of_mdio.c
+++ b/drivers/of/of_mdio.c
@@ -53,7 +53,7 @@
 		return rc;
 
 	/* Loop over the child nodes and register a phy_device for each one */
-	for_each_child_of_node(np, child) {
+	for_each_available_child_of_node(np, child) {
 		const __be32 *paddr;
 		u32 addr;
 		int len;
diff --git a/drivers/of/pdt.c b/drivers/of/pdt.c
index 07cc1d6..37b56fd 100644
--- a/drivers/of/pdt.c
+++ b/drivers/of/pdt.c
@@ -241,15 +241,15 @@
 	BUG_ON(!ops);
 	of_pdt_prom_ops = ops;
 
-	allnodes = of_pdt_create_node(root_node, NULL);
+	of_allnodes = of_pdt_create_node(root_node, NULL);
 #if defined(CONFIG_SPARC)
-	allnodes->path_component_name = "";
+	of_allnodes->path_component_name = "";
 #endif
-	allnodes->full_name = "/";
+	of_allnodes->full_name = "/";
 
-	nextp = &allnodes->allnext;
-	allnodes->child = of_pdt_build_tree(allnodes,
-			of_pdt_prom_ops->getchild(allnodes->phandle), &nextp);
+	nextp = &of_allnodes->allnext;
+	of_allnodes->child = of_pdt_build_tree(of_allnodes,
+			of_pdt_prom_ops->getchild(of_allnodes->phandle), &nextp);
 
 	/* Get pointer to "/chosen" and "/aliasas" nodes for use everywhere */
 	of_alias_scan(kernel_tree_alloc);
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index c5792d6..1af4008 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -17,10 +17,9 @@
 
 #include <linux/pci-acpi.h>
 #include <linux/pm_runtime.h>
+#include <linux/pm_qos.h>
 #include "pci.h"
 
-static DEFINE_MUTEX(pci_acpi_pm_notify_mtx);
-
 /**
  * pci_acpi_wake_bus - Wake-up notification handler for root buses.
  * @handle: ACPI handle of a device the notification is for.
@@ -68,67 +67,6 @@
 }
 
 /**
- * add_pm_notifier - Register PM notifier for given ACPI device.
- * @dev: ACPI device to add the notifier for.
- * @context: PCI device or bus to check for PME status if an event is signaled.
- *
- * NOTE: @dev need not be a run-wake or wake-up device to be a valid source of
- * PM wake-up events.  For example, wake-up events may be generated for bridges
- * if one of the devices below the bridge is signaling PME, even if the bridge
- * itself doesn't have a wake-up GPE associated with it.
- */
-static acpi_status add_pm_notifier(struct acpi_device *dev,
-				   acpi_notify_handler handler,
-				   void *context)
-{
-	acpi_status status = AE_ALREADY_EXISTS;
-
-	mutex_lock(&pci_acpi_pm_notify_mtx);
-
-	if (dev->wakeup.flags.notifier_present)
-		goto out;
-
-	status = acpi_install_notify_handler(dev->handle,
-					     ACPI_SYSTEM_NOTIFY,
-					     handler, context);
-	if (ACPI_FAILURE(status))
-		goto out;
-
-	dev->wakeup.flags.notifier_present = true;
-
- out:
-	mutex_unlock(&pci_acpi_pm_notify_mtx);
-	return status;
-}
-
-/**
- * remove_pm_notifier - Unregister PM notifier from given ACPI device.
- * @dev: ACPI device to remove the notifier from.
- */
-static acpi_status remove_pm_notifier(struct acpi_device *dev,
-				      acpi_notify_handler handler)
-{
-	acpi_status status = AE_BAD_PARAMETER;
-
-	mutex_lock(&pci_acpi_pm_notify_mtx);
-
-	if (!dev->wakeup.flags.notifier_present)
-		goto out;
-
-	status = acpi_remove_notify_handler(dev->handle,
-					    ACPI_SYSTEM_NOTIFY,
-					    handler);
-	if (ACPI_FAILURE(status))
-		goto out;
-
-	dev->wakeup.flags.notifier_present = false;
-
- out:
-	mutex_unlock(&pci_acpi_pm_notify_mtx);
-	return status;
-}
-
-/**
  * pci_acpi_add_bus_pm_notifier - Register PM notifier for given PCI bus.
  * @dev: ACPI device to add the notifier for.
  * @pci_bus: PCI bus to walk checking for PME status if an event is signaled.
@@ -136,7 +74,7 @@
 acpi_status pci_acpi_add_bus_pm_notifier(struct acpi_device *dev,
 					 struct pci_bus *pci_bus)
 {
-	return add_pm_notifier(dev, pci_acpi_wake_bus, pci_bus);
+	return acpi_add_pm_notifier(dev, pci_acpi_wake_bus, pci_bus);
 }
 
 /**
@@ -145,7 +83,7 @@
  */
 acpi_status pci_acpi_remove_bus_pm_notifier(struct acpi_device *dev)
 {
-	return remove_pm_notifier(dev, pci_acpi_wake_bus);
+	return acpi_remove_pm_notifier(dev, pci_acpi_wake_bus);
 }
 
 /**
@@ -156,7 +94,7 @@
 acpi_status pci_acpi_add_pm_notifier(struct acpi_device *dev,
 				     struct pci_dev *pci_dev)
 {
-	return add_pm_notifier(dev, pci_acpi_wake_dev, pci_dev);
+	return acpi_add_pm_notifier(dev, pci_acpi_wake_dev, pci_dev);
 }
 
 /**
@@ -165,7 +103,7 @@
  */
 acpi_status pci_acpi_remove_pm_notifier(struct acpi_device *dev)
 {
-	return remove_pm_notifier(dev, pci_acpi_wake_dev);
+	return acpi_remove_pm_notifier(dev, pci_acpi_wake_dev);
 }
 
 phys_addr_t acpi_pci_root_get_mcfg_addr(acpi_handle handle)
@@ -257,11 +195,16 @@
 		return -ENODEV;
 
 	switch (state) {
+	case PCI_D3cold:
+		if (dev_pm_qos_flags(&dev->dev, PM_QOS_FLAG_NO_POWER_OFF) ==
+				PM_QOS_FLAGS_ALL) {
+			error = -EBUSY;
+			break;
+		}
 	case PCI_D0:
 	case PCI_D1:
 	case PCI_D2:
 	case PCI_D3hot:
-	case PCI_D3cold:
 		error = acpi_bus_set_power(handle, state_conv[state]);
 	}
 
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index d96caefd..390ab69 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -26,6 +26,15 @@
 	help
 	  Say Y here to add some extra checks and diagnostics to PINCTRL calls.
 
+config PINCTRL_AT91
+	bool "AT91 pinctrl driver"
+	depends on OF
+	depends on ARCH_AT91
+	select PINMUX
+	select PINCONF
+	help
+	  Say Y here to enable the at91 pinctrl driver
+
 config PINCTRL_BCM2835
 	bool
 	select PINMUX
@@ -87,21 +96,18 @@
 	bool "MMP2 pin controller driver"
 	depends on ARCH_MMP
 	select PINCTRL_PXA3xx
-	select PINCONF
 
 config PINCTRL_MXS
 	bool
+	select PINMUX
+	select PINCONF
 
 config PINCTRL_IMX23
 	bool
-	select PINMUX
-	select PINCONF
 	select PINCTRL_MXS
 
 config PINCTRL_IMX28
 	bool
-	select PINMUX
-	select PINCONF
 	select PINCTRL_MXS
 
 config PINCTRL_NOMADIK
@@ -126,13 +132,11 @@
 	bool "PXA168 pin controller driver"
 	depends on ARCH_MMP
 	select PINCTRL_PXA3xx
-	select PINCONF
 
 config PINCTRL_PXA910
 	bool "PXA910 pin controller driver"
 	depends on ARCH_MMP
 	select PINCTRL_PXA3xx
-	select PINCONF
 
 config PINCTRL_SINGLE
 	tristate "One-register-per-pin type device tree based pinctrl driver"
@@ -143,23 +147,21 @@
 	  This selects the device tree based generic pinctrl driver.
 
 config PINCTRL_SIRF
-	bool "CSR SiRFprimaII pin controller driver"
-	depends on ARCH_PRIMA2
+	bool "CSR SiRFprimaII/SiRFmarco pin controller driver"
+	depends on ARCH_SIRF
 	select PINMUX
 
 config PINCTRL_TEGRA
 	bool
+	select PINMUX
+	select PINCONF
 
 config PINCTRL_TEGRA20
 	bool
-	select PINMUX
-	select PINCONF
 	select PINCTRL_TEGRA
 
 config PINCTRL_TEGRA30
 	bool
-	select PINMUX
-	select PINCONF
 	select PINCTRL_TEGRA
 
 config PINCTRL_U300
@@ -178,7 +180,7 @@
 	  ports of 8 GPIO pins each.
 
 config PINCTRL_SAMSUNG
-	bool "Samsung pinctrl driver"
+	bool
 	depends on OF && GPIOLIB
 	select PINMUX
 	select PINCONF
@@ -188,27 +190,7 @@
 	depends on OF && GPIOLIB
 	select PINCTRL_SAMSUNG
 
-config PINCTRL_MVEBU
-	bool
-	depends on ARCH_MVEBU
-	select PINMUX
-	select PINCONF
-
-config PINCTRL_DOVE
-	bool
-	select PINCTRL_MVEBU
-
-config PINCTRL_KIRKWOOD
-	bool
-	select PINCTRL_MVEBU
-
-config PINCTRL_ARMADA_370
-	bool
-	select PINCTRL_MVEBU
-
-config PINCTRL_ARMADA_XP
-	bool
-	select PINCTRL_MVEBU
+source "drivers/pinctrl/mvebu/Kconfig"
 
 source "drivers/pinctrl/spear/Kconfig"
 
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index f395ba5..f95f5ed 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -9,6 +9,7 @@
 obj-$(CONFIG_PINCTRL)		+= devicetree.o
 endif
 obj-$(CONFIG_GENERIC_PINCONF)	+= pinconf-generic.o
+obj-$(CONFIG_PINCTRL_AT91)	+= pinctrl-at91.o
 obj-$(CONFIG_PINCTRL_BCM2835)	+= pinctrl-bcm2835.o
 obj-$(CONFIG_PINCTRL_IMX)	+= pinctrl-imx.o
 obj-$(CONFIG_PINCTRL_IMX35)	+= pinctrl-imx35.o
@@ -36,12 +37,8 @@
 obj-$(CONFIG_PINCTRL_COH901)	+= pinctrl-coh901.o
 obj-$(CONFIG_PINCTRL_SAMSUNG)	+= pinctrl-samsung.o
 obj-$(CONFIG_PINCTRL_EXYNOS4)	+= pinctrl-exynos.o
-obj-$(CONFIG_PINCTRL_MVEBU)	+= pinctrl-mvebu.o
-obj-$(CONFIG_PINCTRL_DOVE)	+= pinctrl-dove.o
-obj-$(CONFIG_PINCTRL_KIRKWOOD)	+= pinctrl-kirkwood.o
-obj-$(CONFIG_PINCTRL_ARMADA_370) += pinctrl-armada-370.o
-obj-$(CONFIG_PINCTRL_ARMADA_XP)  += pinctrl-armada-xp.o
 obj-$(CONFIG_PINCTRL_XWAY)	+= pinctrl-xway.o
 obj-$(CONFIG_PINCTRL_LANTIQ)	+= pinctrl-lantiq.o
 
+obj-$(CONFIG_PLAT_ORION)        += mvebu/
 obj-$(CONFIG_PLAT_SPEAR)	+= spear/
diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c
index 2e39c04..5cdee86 100644
--- a/drivers/pinctrl/core.c
+++ b/drivers/pinctrl/core.c
@@ -345,6 +345,62 @@
 }
 EXPORT_SYMBOL_GPL(pinctrl_add_gpio_ranges);
 
+struct pinctrl_dev *pinctrl_find_and_add_gpio_range(const char *devname,
+		struct pinctrl_gpio_range *range)
+{
+	struct pinctrl_dev *pctldev = get_pinctrl_dev_from_devname(devname);
+
+	/*
+	 * If we can't find this device, let's assume that is because
+	 * it has not probed yet, so the driver trying to register this
+	 * range need to defer probing.
+	 */
+	if (!pctldev)
+		return ERR_PTR(-EPROBE_DEFER);
+
+	pinctrl_add_gpio_range(pctldev, range);
+	return pctldev;
+}
+EXPORT_SYMBOL_GPL(pinctrl_find_and_add_gpio_range);
+
+/**
+ * pinctrl_find_gpio_range_from_pin() - locate the GPIO range for a pin
+ * @pctldev: the pin controller device to look in
+ * @pin: a controller-local number to find the range for
+ */
+struct pinctrl_gpio_range *
+pinctrl_find_gpio_range_from_pin(struct pinctrl_dev *pctldev,
+				 unsigned int pin)
+{
+	struct pinctrl_gpio_range *range = NULL;
+
+	/* Loop over the ranges */
+	list_for_each_entry(range, &pctldev->gpio_ranges, node) {
+		/* Check if we're in the valid range */
+		if (pin >= range->pin_base &&
+		    pin < range->pin_base + range->npins) {
+			return range;
+		}
+	}
+
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(pinctrl_find_gpio_range_from_pin);
+
+/**
+ * pinctrl_remove_gpio_range() - remove a range of GPIOs fro a pin controller
+ * @pctldev: pin controller device to remove the range from
+ * @range: the GPIO range to remove
+ */
+void pinctrl_remove_gpio_range(struct pinctrl_dev *pctldev,
+			       struct pinctrl_gpio_range *range)
+{
+	mutex_lock(&pinctrl_mutex);
+	list_del(&range->node);
+	mutex_unlock(&pinctrl_mutex);
+}
+EXPORT_SYMBOL_GPL(pinctrl_remove_gpio_range);
+
 /**
  * pinctrl_get_group_selector() - returns the group selector for a group
  * @pctldev: the pin controller handling the group
@@ -563,6 +619,8 @@
 		return -EPROBE_DEFER;
 	}
 
+	setting->dev_name = map->dev_name;
+
 	switch (map->type) {
 	case PIN_MAP_TYPE_MUX_GROUP:
 		ret = pinmux_map_to_setting(map, setting);
diff --git a/drivers/pinctrl/core.h b/drivers/pinctrl/core.h
index 1f40ff6..12f5694 100644
--- a/drivers/pinctrl/core.h
+++ b/drivers/pinctrl/core.h
@@ -105,12 +105,14 @@
  * @type: the type of setting
  * @pctldev: pin control device handling to be programmed. Not used for
  *   PIN_MAP_TYPE_DUMMY_STATE.
+ * @dev_name: the name of the device using this state
  * @data: Data specific to the setting type
  */
 struct pinctrl_setting {
 	struct list_head node;
 	enum pinctrl_map_type type;
 	struct pinctrl_dev *pctldev;
+	const char *dev_name;
 	union {
 		struct pinctrl_setting_mux mux;
 		struct pinctrl_setting_configs configs;
diff --git a/drivers/pinctrl/devicetree.c b/drivers/pinctrl/devicetree.c
index fcb1de4..fe2d1af 100644
--- a/drivers/pinctrl/devicetree.c
+++ b/drivers/pinctrl/devicetree.c
@@ -106,6 +106,17 @@
 	return NULL;
 }
 
+struct pinctrl_dev *of_pinctrl_get(struct device_node *np)
+{
+	struct pinctrl_dev *pctldev;
+
+	pctldev = find_pinctrl_by_of_node(np);
+	if (!pctldev)
+		return NULL;
+
+	return pctldev;
+}
+
 static int dt_to_map_one_config(struct pinctrl *p, const char *statename,
 				struct device_node *np_config)
 {
diff --git a/drivers/pinctrl/mvebu/Kconfig b/drivers/pinctrl/mvebu/Kconfig
new file mode 100644
index 0000000..366fa54
--- /dev/null
+++ b/drivers/pinctrl/mvebu/Kconfig
@@ -0,0 +1,24 @@
+if PLAT_ORION
+
+config PINCTRL_MVEBU
+	bool
+	select PINMUX
+	select PINCONF
+
+config PINCTRL_DOVE
+	bool
+	select PINCTRL_MVEBU
+
+config PINCTRL_KIRKWOOD
+	bool
+	select PINCTRL_MVEBU
+
+config PINCTRL_ARMADA_370
+	bool
+	select PINCTRL_MVEBU
+
+config PINCTRL_ARMADA_XP
+	bool
+	select PINCTRL_MVEBU
+
+endif
diff --git a/drivers/pinctrl/mvebu/Makefile b/drivers/pinctrl/mvebu/Makefile
new file mode 100644
index 0000000..37c2532
--- /dev/null
+++ b/drivers/pinctrl/mvebu/Makefile
@@ -0,0 +1,5 @@
+obj-$(CONFIG_PINCTRL_MVEBU)	+= pinctrl-mvebu.o
+obj-$(CONFIG_PINCTRL_DOVE)	+= pinctrl-dove.o
+obj-$(CONFIG_PINCTRL_KIRKWOOD)	+= pinctrl-kirkwood.o
+obj-$(CONFIG_PINCTRL_ARMADA_370) += pinctrl-armada-370.o
+obj-$(CONFIG_PINCTRL_ARMADA_XP)  += pinctrl-armada-xp.o
diff --git a/drivers/pinctrl/pinctrl-armada-370.c b/drivers/pinctrl/mvebu/pinctrl-armada-370.c
similarity index 100%
rename from drivers/pinctrl/pinctrl-armada-370.c
rename to drivers/pinctrl/mvebu/pinctrl-armada-370.c
diff --git a/drivers/pinctrl/pinctrl-armada-xp.c b/drivers/pinctrl/mvebu/pinctrl-armada-xp.c
similarity index 100%
rename from drivers/pinctrl/pinctrl-armada-xp.c
rename to drivers/pinctrl/mvebu/pinctrl-armada-xp.c
diff --git a/drivers/pinctrl/pinctrl-dove.c b/drivers/pinctrl/mvebu/pinctrl-dove.c
similarity index 100%
rename from drivers/pinctrl/pinctrl-dove.c
rename to drivers/pinctrl/mvebu/pinctrl-dove.c
diff --git a/drivers/pinctrl/pinctrl-kirkwood.c b/drivers/pinctrl/mvebu/pinctrl-kirkwood.c
similarity index 100%
rename from drivers/pinctrl/pinctrl-kirkwood.c
rename to drivers/pinctrl/mvebu/pinctrl-kirkwood.c
diff --git a/drivers/pinctrl/pinctrl-mvebu.c b/drivers/pinctrl/mvebu/pinctrl-mvebu.c
similarity index 99%
rename from drivers/pinctrl/pinctrl-mvebu.c
rename to drivers/pinctrl/mvebu/pinctrl-mvebu.c
index 8e6266c..6c44b7e 100644
--- a/drivers/pinctrl/pinctrl-mvebu.c
+++ b/drivers/pinctrl/mvebu/pinctrl-mvebu.c
@@ -24,7 +24,6 @@
 #include <linux/pinctrl/pinctrl.h>
 #include <linux/pinctrl/pinmux.h>
 
-#include "core.h"
 #include "pinctrl-mvebu.h"
 
 #define MPPS_PER_REG	8
diff --git a/drivers/pinctrl/pinctrl-mvebu.h b/drivers/pinctrl/mvebu/pinctrl-mvebu.h
similarity index 100%
rename from drivers/pinctrl/pinctrl-mvebu.h
rename to drivers/pinctrl/mvebu/pinctrl-mvebu.h
diff --git a/drivers/pinctrl/pinconf-generic.c b/drivers/pinctrl/pinconf-generic.c
index 33fbaea..833a364 100644
--- a/drivers/pinctrl/pinconf-generic.c
+++ b/drivers/pinctrl/pinconf-generic.c
@@ -41,6 +41,7 @@
 	PCONFDUMP(PIN_CONFIG_DRIVE_PUSH_PULL, "output drive push pull", NULL),
 	PCONFDUMP(PIN_CONFIG_DRIVE_OPEN_DRAIN, "output drive open drain", NULL),
 	PCONFDUMP(PIN_CONFIG_DRIVE_OPEN_SOURCE, "output drive open source", NULL),
+	PCONFDUMP(PIN_CONFIG_INPUT_SCHMITT_DISABLE, "input schmitt disabled", NULL),
 	PCONFDUMP(PIN_CONFIG_INPUT_SCHMITT, "input schmitt trigger", NULL),
 	PCONFDUMP(PIN_CONFIG_INPUT_DEBOUNCE, "input debounce", "time units"),
 	PCONFDUMP(PIN_CONFIG_POWER_SOURCE, "pin power source", "selector"),
diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c
new file mode 100644
index 0000000..c5e7571
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-at91.c
@@ -0,0 +1,1634 @@
+/*
+ * at91 pinctrl driver based on at91 pinmux core
+ *
+ * Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Under GPLv2 only
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/pinctrl/machine.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+/* Since we request GPIOs from ourself */
+#include <linux/pinctrl/consumer.h>
+
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/at91_pio.h>
+
+#include "core.h"
+
+#define MAX_NB_GPIO_PER_BANK	32
+
+struct at91_pinctrl_mux_ops;
+
+struct at91_gpio_chip {
+	struct gpio_chip	chip;
+	struct pinctrl_gpio_range range;
+	struct at91_gpio_chip	*next;		/* Bank sharing same clock */
+	int			pioc_hwirq;	/* PIO bank interrupt identifier on AIC */
+	int			pioc_virq;	/* PIO bank Linux virtual interrupt */
+	int			pioc_idx;	/* PIO bank index */
+	void __iomem		*regbase;	/* PIO bank virtual address */
+	struct clk		*clock;		/* associated clock */
+	struct irq_domain	*domain;	/* associated irq domain */
+	struct at91_pinctrl_mux_ops *ops;	/* ops */
+};
+
+#define to_at91_gpio_chip(c) container_of(c, struct at91_gpio_chip, chip)
+
+static struct at91_gpio_chip *gpio_chips[MAX_GPIO_BANKS];
+
+static int gpio_banks;
+
+#define PULL_UP		(1 << 0)
+#define MULTI_DRIVE	(1 << 1)
+#define DEGLITCH	(1 << 2)
+#define PULL_DOWN	(1 << 3)
+#define DIS_SCHMIT	(1 << 4)
+#define DEBOUNCE	(1 << 16)
+#define DEBOUNCE_VAL_SHIFT	17
+#define DEBOUNCE_VAL	(0x3fff << DEBOUNCE_VAL_SHIFT)
+
+/**
+ * struct at91_pmx_func - describes AT91 pinmux functions
+ * @name: the name of this specific function
+ * @groups: corresponding pin groups
+ * @ngroups: the number of groups
+ */
+struct at91_pmx_func {
+	const char	*name;
+	const char	**groups;
+	unsigned	ngroups;
+};
+
+enum at91_mux {
+	AT91_MUX_GPIO = 0,
+	AT91_MUX_PERIPH_A = 1,
+	AT91_MUX_PERIPH_B = 2,
+	AT91_MUX_PERIPH_C = 3,
+	AT91_MUX_PERIPH_D = 4,
+};
+
+/**
+ * struct at91_pmx_pin - describes an At91 pin mux
+ * @bank: the bank of the pin
+ * @pin: the pin number in the @bank
+ * @mux: the mux mode : gpio or periph_x of the pin i.e. alternate function.
+ * @conf: the configuration of the pin: PULL_UP, MULTIDRIVE etc...
+ */
+struct at91_pmx_pin {
+	uint32_t	bank;
+	uint32_t	pin;
+	enum at91_mux	mux;
+	unsigned long	conf;
+};
+
+/**
+ * struct at91_pin_group - describes an At91 pin group
+ * @name: the name of this specific pin group
+ * @pins_conf: the mux mode for each pin in this group. The size of this
+ *	array is the same as pins.
+ * @pins: an array of discrete physical pins used in this group, taken
+ *	from the driver-local pin enumeration space
+ * @npins: the number of pins in this group array, i.e. the number of
+ *	elements in .pins so we can iterate over that array
+ */
+struct at91_pin_group {
+	const char		*name;
+	struct at91_pmx_pin	*pins_conf;
+	unsigned int		*pins;
+	unsigned		npins;
+};
+
+/**
+ * struct at91_pinctrl_mux_ops - describes an At91 mux ops group
+ * on new IP with support for periph C and D the way to mux in
+ * periph A and B has changed
+ * So provide the right call back
+ * if not present means the IP does not support it
+ * @get_periph: return the periph mode configured
+ * @mux_A_periph: mux as periph A
+ * @mux_B_periph: mux as periph B
+ * @mux_C_periph: mux as periph C
+ * @mux_D_periph: mux as periph D
+ * @get_deglitch: get deglitch status
+ * @set_deglitch: enable/disable deglitch
+ * @get_debounce: get debounce status
+ * @set_debounce: enable/disable debounce
+ * @get_pulldown: get pulldown status
+ * @set_pulldown: enable/disable pulldown
+ * @get_schmitt_trig: get schmitt trigger status
+ * @disable_schmitt_trig: disable schmitt trigger
+ * @irq_type: return irq type
+ */
+struct at91_pinctrl_mux_ops {
+	enum at91_mux (*get_periph)(void __iomem *pio, unsigned mask);
+	void (*mux_A_periph)(void __iomem *pio, unsigned mask);
+	void (*mux_B_periph)(void __iomem *pio, unsigned mask);
+	void (*mux_C_periph)(void __iomem *pio, unsigned mask);
+	void (*mux_D_periph)(void __iomem *pio, unsigned mask);
+	bool (*get_deglitch)(void __iomem *pio, unsigned pin);
+	void (*set_deglitch)(void __iomem *pio, unsigned mask, bool in_on);
+	bool (*get_debounce)(void __iomem *pio, unsigned pin, u32 *div);
+	void (*set_debounce)(void __iomem *pio, unsigned mask, bool in_on, u32 div);
+	bool (*get_pulldown)(void __iomem *pio, unsigned pin);
+	void (*set_pulldown)(void __iomem *pio, unsigned mask, bool in_on);
+	bool (*get_schmitt_trig)(void __iomem *pio, unsigned pin);
+	void (*disable_schmitt_trig)(void __iomem *pio, unsigned mask);
+	/* irq */
+	int (*irq_type)(struct irq_data *d, unsigned type);
+};
+
+static int gpio_irq_type(struct irq_data *d, unsigned type);
+static int alt_gpio_irq_type(struct irq_data *d, unsigned type);
+
+struct at91_pinctrl {
+	struct device		*dev;
+	struct pinctrl_dev	*pctl;
+
+	int			nbanks;
+
+	uint32_t		*mux_mask;
+	int			nmux;
+
+	struct at91_pmx_func	*functions;
+	int			nfunctions;
+
+	struct at91_pin_group	*groups;
+	int			ngroups;
+
+	struct at91_pinctrl_mux_ops *ops;
+};
+
+static const inline struct at91_pin_group *at91_pinctrl_find_group_by_name(
+				const struct at91_pinctrl *info,
+				const char *name)
+{
+	const struct at91_pin_group *grp = NULL;
+	int i;
+
+	for (i = 0; i < info->ngroups; i++) {
+		if (strcmp(info->groups[i].name, name))
+			continue;
+
+		grp = &info->groups[i];
+		dev_dbg(info->dev, "%s: %d 0:%d\n", name, grp->npins, grp->pins[0]);
+		break;
+	}
+
+	return grp;
+}
+
+static int at91_get_groups_count(struct pinctrl_dev *pctldev)
+{
+	struct at91_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
+
+	return info->ngroups;
+}
+
+static const char *at91_get_group_name(struct pinctrl_dev *pctldev,
+				       unsigned selector)
+{
+	struct at91_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
+
+	return info->groups[selector].name;
+}
+
+static int at91_get_group_pins(struct pinctrl_dev *pctldev, unsigned selector,
+			       const unsigned **pins,
+			       unsigned *npins)
+{
+	struct at91_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
+
+	if (selector >= info->ngroups)
+		return -EINVAL;
+
+	*pins = info->groups[selector].pins;
+	*npins = info->groups[selector].npins;
+
+	return 0;
+}
+
+static void at91_pin_dbg_show(struct pinctrl_dev *pctldev, struct seq_file *s,
+		   unsigned offset)
+{
+	seq_printf(s, "%s", dev_name(pctldev->dev));
+}
+
+static int at91_dt_node_to_map(struct pinctrl_dev *pctldev,
+			struct device_node *np,
+			struct pinctrl_map **map, unsigned *num_maps)
+{
+	struct at91_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
+	const struct at91_pin_group *grp;
+	struct pinctrl_map *new_map;
+	struct device_node *parent;
+	int map_num = 1;
+	int i;
+
+	/*
+	 * first find the group of this node and check if we need create
+	 * config maps for pins
+	 */
+	grp = at91_pinctrl_find_group_by_name(info, np->name);
+	if (!grp) {
+		dev_err(info->dev, "unable to find group for node %s\n",
+			np->name);
+		return -EINVAL;
+	}
+
+	map_num += grp->npins;
+	new_map = devm_kzalloc(pctldev->dev, sizeof(*new_map) * map_num, GFP_KERNEL);
+	if (!new_map)
+		return -ENOMEM;
+
+	*map = new_map;
+	*num_maps = map_num;
+
+	/* create mux map */
+	parent = of_get_parent(np);
+	if (!parent) {
+		kfree(new_map);
+		return -EINVAL;
+	}
+	new_map[0].type = PIN_MAP_TYPE_MUX_GROUP;
+	new_map[0].data.mux.function = parent->name;
+	new_map[0].data.mux.group = np->name;
+	of_node_put(parent);
+
+	/* create config map */
+	new_map++;
+	for (i = 0; i < grp->npins; i++) {
+		new_map[i].type = PIN_MAP_TYPE_CONFIGS_PIN;
+		new_map[i].data.configs.group_or_pin =
+				pin_get_name(pctldev, grp->pins[i]);
+		new_map[i].data.configs.configs = &grp->pins_conf[i].conf;
+		new_map[i].data.configs.num_configs = 1;
+	}
+
+	dev_dbg(pctldev->dev, "maps: function %s group %s num %d\n",
+		(*map)->data.mux.function, (*map)->data.mux.group, map_num);
+
+	return 0;
+}
+
+static void at91_dt_free_map(struct pinctrl_dev *pctldev,
+				struct pinctrl_map *map, unsigned num_maps)
+{
+}
+
+static struct pinctrl_ops at91_pctrl_ops = {
+	.get_groups_count	= at91_get_groups_count,
+	.get_group_name		= at91_get_group_name,
+	.get_group_pins		= at91_get_group_pins,
+	.pin_dbg_show		= at91_pin_dbg_show,
+	.dt_node_to_map		= at91_dt_node_to_map,
+	.dt_free_map		= at91_dt_free_map,
+};
+
+static void __iomem * pin_to_controller(struct at91_pinctrl *info,
+				 unsigned int bank)
+{
+	return gpio_chips[bank]->regbase;
+}
+
+static inline int pin_to_bank(unsigned pin)
+{
+	return pin /= MAX_NB_GPIO_PER_BANK;
+}
+
+static unsigned pin_to_mask(unsigned int pin)
+{
+	return 1 << pin;
+}
+
+static void at91_mux_disable_interrupt(void __iomem *pio, unsigned mask)
+{
+	writel_relaxed(mask, pio + PIO_IDR);
+}
+
+static unsigned at91_mux_get_pullup(void __iomem *pio, unsigned pin)
+{
+	return (readl_relaxed(pio + PIO_PUSR) >> pin) & 0x1;
+}
+
+static void at91_mux_set_pullup(void __iomem *pio, unsigned mask, bool on)
+{
+	writel_relaxed(mask, pio + (on ? PIO_PUER : PIO_PUDR));
+}
+
+static unsigned at91_mux_get_multidrive(void __iomem *pio, unsigned pin)
+{
+	return (readl_relaxed(pio + PIO_MDSR) >> pin) & 0x1;
+}
+
+static void at91_mux_set_multidrive(void __iomem *pio, unsigned mask, bool on)
+{
+	writel_relaxed(mask, pio + (on ? PIO_MDER : PIO_MDDR));
+}
+
+static void at91_mux_set_A_periph(void __iomem *pio, unsigned mask)
+{
+	writel_relaxed(mask, pio + PIO_ASR);
+}
+
+static void at91_mux_set_B_periph(void __iomem *pio, unsigned mask)
+{
+	writel_relaxed(mask, pio + PIO_BSR);
+}
+
+static void at91_mux_pio3_set_A_periph(void __iomem *pio, unsigned mask)
+{
+
+	writel_relaxed(readl_relaxed(pio + PIO_ABCDSR1) & ~mask,
+						pio + PIO_ABCDSR1);
+	writel_relaxed(readl_relaxed(pio + PIO_ABCDSR2) & ~mask,
+						pio + PIO_ABCDSR2);
+}
+
+static void at91_mux_pio3_set_B_periph(void __iomem *pio, unsigned mask)
+{
+	writel_relaxed(readl_relaxed(pio + PIO_ABCDSR1) | mask,
+						pio + PIO_ABCDSR1);
+	writel_relaxed(readl_relaxed(pio + PIO_ABCDSR2) & ~mask,
+						pio + PIO_ABCDSR2);
+}
+
+static void at91_mux_pio3_set_C_periph(void __iomem *pio, unsigned mask)
+{
+	writel_relaxed(readl_relaxed(pio + PIO_ABCDSR1) & ~mask, pio + PIO_ABCDSR1);
+	writel_relaxed(readl_relaxed(pio + PIO_ABCDSR2) | mask, pio + PIO_ABCDSR2);
+}
+
+static void at91_mux_pio3_set_D_periph(void __iomem *pio, unsigned mask)
+{
+	writel_relaxed(readl_relaxed(pio + PIO_ABCDSR1) | mask, pio + PIO_ABCDSR1);
+	writel_relaxed(readl_relaxed(pio + PIO_ABCDSR2) | mask, pio + PIO_ABCDSR2);
+}
+
+static enum at91_mux at91_mux_pio3_get_periph(void __iomem *pio, unsigned mask)
+{
+	unsigned select;
+
+	if (readl_relaxed(pio + PIO_PSR) & mask)
+		return AT91_MUX_GPIO;
+
+	select = !!(readl_relaxed(pio + PIO_ABCDSR1) & mask);
+	select |= (!!(readl_relaxed(pio + PIO_ABCDSR2) & mask) << 1);
+
+	return select + 1;
+}
+
+static enum at91_mux at91_mux_get_periph(void __iomem *pio, unsigned mask)
+{
+	unsigned select;
+
+	if (readl_relaxed(pio + PIO_PSR) & mask)
+		return AT91_MUX_GPIO;
+
+	select = readl_relaxed(pio + PIO_ABSR) & mask;
+
+	return select + 1;
+}
+
+static bool at91_mux_get_deglitch(void __iomem *pio, unsigned pin)
+{
+	return (__raw_readl(pio + PIO_IFSR) >> pin) & 0x1;
+}
+
+static void at91_mux_set_deglitch(void __iomem *pio, unsigned mask, bool is_on)
+{
+	__raw_writel(mask, pio + (is_on ? PIO_IFER : PIO_IFDR));
+}
+
+static void at91_mux_pio3_set_deglitch(void __iomem *pio, unsigned mask, bool is_on)
+{
+	if (is_on)
+		__raw_writel(mask, pio + PIO_IFSCDR);
+	at91_mux_set_deglitch(pio, mask, is_on);
+}
+
+static bool at91_mux_pio3_get_debounce(void __iomem *pio, unsigned pin, u32 *div)
+{
+	*div = __raw_readl(pio + PIO_SCDR);
+
+	return (__raw_readl(pio + PIO_IFSCSR) >> pin) & 0x1;
+}
+
+static void at91_mux_pio3_set_debounce(void __iomem *pio, unsigned mask,
+				bool is_on, u32 div)
+{
+	if (is_on) {
+		__raw_writel(mask, pio + PIO_IFSCER);
+		__raw_writel(div & PIO_SCDR_DIV, pio + PIO_SCDR);
+		__raw_writel(mask, pio + PIO_IFER);
+	} else {
+		__raw_writel(mask, pio + PIO_IFDR);
+	}
+}
+
+static bool at91_mux_pio3_get_pulldown(void __iomem *pio, unsigned pin)
+{
+	return (__raw_readl(pio + PIO_PPDSR) >> pin) & 0x1;
+}
+
+static void at91_mux_pio3_set_pulldown(void __iomem *pio, unsigned mask, bool is_on)
+{
+	__raw_writel(mask, pio + (is_on ? PIO_PPDER : PIO_PPDDR));
+}
+
+static void at91_mux_pio3_disable_schmitt_trig(void __iomem *pio, unsigned mask)
+{
+	__raw_writel(__raw_readl(pio + PIO_SCHMITT) | mask, pio + PIO_SCHMITT);
+}
+
+static bool at91_mux_pio3_get_schmitt_trig(void __iomem *pio, unsigned pin)
+{
+	return (__raw_readl(pio + PIO_SCHMITT) >> pin) & 0x1;
+}
+
+static struct at91_pinctrl_mux_ops at91rm9200_ops = {
+	.get_periph	= at91_mux_get_periph,
+	.mux_A_periph	= at91_mux_set_A_periph,
+	.mux_B_periph	= at91_mux_set_B_periph,
+	.get_deglitch	= at91_mux_get_deglitch,
+	.set_deglitch	= at91_mux_set_deglitch,
+	.irq_type	= gpio_irq_type,
+};
+
+static struct at91_pinctrl_mux_ops at91sam9x5_ops = {
+	.get_periph	= at91_mux_pio3_get_periph,
+	.mux_A_periph	= at91_mux_pio3_set_A_periph,
+	.mux_B_periph	= at91_mux_pio3_set_B_periph,
+	.mux_C_periph	= at91_mux_pio3_set_C_periph,
+	.mux_D_periph	= at91_mux_pio3_set_D_periph,
+	.get_deglitch	= at91_mux_get_deglitch,
+	.set_deglitch	= at91_mux_pio3_set_deglitch,
+	.get_debounce	= at91_mux_pio3_get_debounce,
+	.set_debounce	= at91_mux_pio3_set_debounce,
+	.get_pulldown	= at91_mux_pio3_get_pulldown,
+	.set_pulldown	= at91_mux_pio3_set_pulldown,
+	.get_schmitt_trig = at91_mux_pio3_get_schmitt_trig,
+	.disable_schmitt_trig = at91_mux_pio3_disable_schmitt_trig,
+	.irq_type	= alt_gpio_irq_type,
+};
+
+static void at91_pin_dbg(const struct device *dev, const struct at91_pmx_pin *pin)
+{
+	if (pin->mux) {
+		dev_dbg(dev, "pio%c%d configured as periph%c with conf = 0x%lu\n",
+			pin->bank + 'A', pin->pin, pin->mux - 1 + 'A', pin->conf);
+	} else {
+		dev_dbg(dev, "pio%c%d configured as gpio with conf = 0x%lu\n",
+			pin->bank + 'A', pin->pin, pin->conf);
+	}
+}
+
+static int pin_check_config(struct at91_pinctrl *info, const char* name,
+			    int index, const struct at91_pmx_pin *pin)
+{
+	int mux;
+
+	/* check if it's a valid config */
+	if (pin->bank >= info->nbanks) {
+		dev_err(info->dev, "%s: pin conf %d bank_id %d >= nbanks %d\n",
+			name, index, pin->bank, info->nbanks);
+		return -EINVAL;
+	}
+
+	if (pin->pin >= MAX_NB_GPIO_PER_BANK) {
+		dev_err(info->dev, "%s: pin conf %d pin_bank_id %d >= %d\n",
+			name, index, pin->pin, MAX_NB_GPIO_PER_BANK);
+		return -EINVAL;
+	}
+
+	if (!pin->mux)
+		return 0;
+
+	mux = pin->mux - 1;
+
+	if (mux >= info->nmux) {
+		dev_err(info->dev, "%s: pin conf %d mux_id %d >= nmux %d\n",
+			name, index, mux, info->nmux);
+		return -EINVAL;
+	}
+
+	if (!(info->mux_mask[pin->bank * info->nmux + mux] & 1 << pin->pin)) {
+		dev_err(info->dev, "%s: pin conf %d mux_id %d not supported for pio%c%d\n",
+			name, index, mux, pin->bank + 'A', pin->pin);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void at91_mux_gpio_disable(void __iomem *pio, unsigned mask)
+{
+	writel_relaxed(mask, pio + PIO_PDR);
+}
+
+static void at91_mux_gpio_enable(void __iomem *pio, unsigned mask, bool input)
+{
+	writel_relaxed(mask, pio + PIO_PER);
+	writel_relaxed(mask, pio + (input ? PIO_ODR : PIO_OER));
+}
+
+static int at91_pmx_enable(struct pinctrl_dev *pctldev, unsigned selector,
+			   unsigned group)
+{
+	struct at91_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
+	const struct at91_pmx_pin *pins_conf = info->groups[group].pins_conf;
+	const struct at91_pmx_pin *pin;
+	uint32_t npins = info->groups[group].npins;
+	int i, ret;
+	unsigned mask;
+	void __iomem *pio;
+
+	dev_dbg(info->dev, "enable function %s group %s\n",
+		info->functions[selector].name, info->groups[group].name);
+
+	/* first check that all the pins of the group are valid with a valid
+	 * paramter */
+	for (i = 0; i < npins; i++) {
+		pin = &pins_conf[i];
+		ret = pin_check_config(info, info->groups[group].name, i, pin);
+		if (ret)
+			return ret;
+	}
+
+	for (i = 0; i < npins; i++) {
+		pin = &pins_conf[i];
+		at91_pin_dbg(info->dev, pin);
+		pio = pin_to_controller(info, pin->bank);
+		mask = pin_to_mask(pin->pin);
+		at91_mux_disable_interrupt(pio, mask);
+		switch(pin->mux) {
+		case AT91_MUX_GPIO:
+			at91_mux_gpio_enable(pio, mask, 1);
+			break;
+		case AT91_MUX_PERIPH_A:
+			info->ops->mux_A_periph(pio, mask);
+			break;
+		case AT91_MUX_PERIPH_B:
+			info->ops->mux_B_periph(pio, mask);
+			break;
+		case AT91_MUX_PERIPH_C:
+			if (!info->ops->mux_C_periph)
+				return -EINVAL;
+			info->ops->mux_C_periph(pio, mask);
+			break;
+		case AT91_MUX_PERIPH_D:
+			if (!info->ops->mux_D_periph)
+				return -EINVAL;
+			info->ops->mux_D_periph(pio, mask);
+			break;
+		}
+		if (pin->mux)
+			at91_mux_gpio_disable(pio, mask);
+	}
+
+	return 0;
+}
+
+static void at91_pmx_disable(struct pinctrl_dev *pctldev, unsigned selector,
+			   unsigned group)
+{
+	struct at91_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
+	const struct at91_pmx_pin *pins_conf = info->groups[group].pins_conf;
+	const struct at91_pmx_pin *pin;
+	uint32_t npins = info->groups[group].npins;
+	int i;
+	unsigned mask;
+	void __iomem *pio;
+
+	for (i = 0; i < npins; i++) {
+		pin = &pins_conf[i];
+		at91_pin_dbg(info->dev, pin);
+		pio = pin_to_controller(info, pin->bank);
+		mask = pin_to_mask(pin->pin);
+		at91_mux_gpio_enable(pio, mask, 1);
+	}
+}
+
+static int at91_pmx_get_funcs_count(struct pinctrl_dev *pctldev)
+{
+	struct at91_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
+
+	return info->nfunctions;
+}
+
+static const char *at91_pmx_get_func_name(struct pinctrl_dev *pctldev,
+					  unsigned selector)
+{
+	struct at91_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
+
+	return info->functions[selector].name;
+}
+
+static int at91_pmx_get_groups(struct pinctrl_dev *pctldev, unsigned selector,
+			       const char * const **groups,
+			       unsigned * const num_groups)
+{
+	struct at91_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
+
+	*groups = info->functions[selector].groups;
+	*num_groups = info->functions[selector].ngroups;
+
+	return 0;
+}
+
+static int at91_gpio_request_enable(struct pinctrl_dev *pctldev,
+				    struct pinctrl_gpio_range *range,
+				    unsigned offset)
+{
+	struct at91_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev);
+	struct at91_gpio_chip *at91_chip;
+	struct gpio_chip *chip;
+	unsigned mask;
+
+	if (!range) {
+		dev_err(npct->dev, "invalid range\n");
+		return -EINVAL;
+	}
+	if (!range->gc) {
+		dev_err(npct->dev, "missing GPIO chip in range\n");
+		return -EINVAL;
+	}
+	chip = range->gc;
+	at91_chip = container_of(chip, struct at91_gpio_chip, chip);
+
+	dev_dbg(npct->dev, "enable pin %u as GPIO\n", offset);
+
+	mask = 1 << (offset - chip->base);
+
+	dev_dbg(npct->dev, "enable pin %u as PIO%c%d 0x%x\n",
+		offset, 'A' + range->id, offset - chip->base, mask);
+
+	writel_relaxed(mask, at91_chip->regbase + PIO_PER);
+
+	return 0;
+}
+
+static void at91_gpio_disable_free(struct pinctrl_dev *pctldev,
+				   struct pinctrl_gpio_range *range,
+				   unsigned offset)
+{
+	struct at91_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev);
+
+	dev_dbg(npct->dev, "disable pin %u as GPIO\n", offset);
+	/* Set the pin to some default state, GPIO is usually default */
+}
+
+static struct pinmux_ops at91_pmx_ops = {
+	.get_functions_count	= at91_pmx_get_funcs_count,
+	.get_function_name	= at91_pmx_get_func_name,
+	.get_function_groups	= at91_pmx_get_groups,
+	.enable			= at91_pmx_enable,
+	.disable		= at91_pmx_disable,
+	.gpio_request_enable	= at91_gpio_request_enable,
+	.gpio_disable_free	= at91_gpio_disable_free,
+};
+
+static int at91_pinconf_get(struct pinctrl_dev *pctldev,
+			     unsigned pin_id, unsigned long *config)
+{
+	struct at91_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
+	void __iomem *pio;
+	unsigned pin;
+	int div;
+
+	dev_dbg(info->dev, "%s:%d, pin_id=%d, config=0x%lx", __func__, __LINE__, pin_id, *config);
+	pio = pin_to_controller(info, pin_to_bank(pin_id));
+	pin = pin_id % MAX_NB_GPIO_PER_BANK;
+
+	if (at91_mux_get_multidrive(pio, pin))
+		*config |= MULTI_DRIVE;
+
+	if (at91_mux_get_pullup(pio, pin))
+		*config |= PULL_UP;
+
+	if (info->ops->get_deglitch && info->ops->get_deglitch(pio, pin))
+		*config |= DEGLITCH;
+	if (info->ops->get_debounce && info->ops->get_debounce(pio, pin, &div))
+		*config |= DEBOUNCE | (div << DEBOUNCE_VAL_SHIFT);
+	if (info->ops->get_pulldown && info->ops->get_pulldown(pio, pin))
+		*config |= PULL_DOWN;
+	if (info->ops->get_schmitt_trig && info->ops->get_schmitt_trig(pio, pin))
+		*config |= DIS_SCHMIT;
+
+	return 0;
+}
+
+static int at91_pinconf_set(struct pinctrl_dev *pctldev,
+			     unsigned pin_id, unsigned long config)
+{
+	struct at91_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
+	unsigned mask;
+	void __iomem *pio;
+
+	dev_dbg(info->dev, "%s:%d, pin_id=%d, config=0x%lx", __func__, __LINE__, pin_id, config);
+	pio = pin_to_controller(info, pin_to_bank(pin_id));
+	mask = pin_to_mask(pin_id % MAX_NB_GPIO_PER_BANK);
+
+	if (config & PULL_UP && config & PULL_DOWN)
+		return -EINVAL;
+
+	at91_mux_set_pullup(pio, mask, config & PULL_UP);
+	at91_mux_set_multidrive(pio, mask, config & MULTI_DRIVE);
+	if (info->ops->set_deglitch)
+		info->ops->set_deglitch(pio, mask, config & DEGLITCH);
+	if (info->ops->set_debounce)
+		info->ops->set_debounce(pio, mask, config & DEBOUNCE,
+				(config & DEBOUNCE_VAL) >> DEBOUNCE_VAL_SHIFT);
+	if (info->ops->set_pulldown)
+		info->ops->set_pulldown(pio, mask, config & PULL_DOWN);
+	if (info->ops->disable_schmitt_trig && config & DIS_SCHMIT)
+		info->ops->disable_schmitt_trig(pio, mask);
+
+	return 0;
+}
+
+static void at91_pinconf_dbg_show(struct pinctrl_dev *pctldev,
+				   struct seq_file *s, unsigned pin_id)
+{
+
+}
+
+static void at91_pinconf_group_dbg_show(struct pinctrl_dev *pctldev,
+					 struct seq_file *s, unsigned group)
+{
+}
+
+static struct pinconf_ops at91_pinconf_ops = {
+	.pin_config_get			= at91_pinconf_get,
+	.pin_config_set			= at91_pinconf_set,
+	.pin_config_dbg_show		= at91_pinconf_dbg_show,
+	.pin_config_group_dbg_show	= at91_pinconf_group_dbg_show,
+};
+
+static struct pinctrl_desc at91_pinctrl_desc = {
+	.pctlops	= &at91_pctrl_ops,
+	.pmxops		= &at91_pmx_ops,
+	.confops	= &at91_pinconf_ops,
+	.owner		= THIS_MODULE,
+};
+
+static const char *gpio_compat = "atmel,at91rm9200-gpio";
+
+static void __devinit at91_pinctrl_child_count(struct at91_pinctrl *info,
+					      struct device_node *np)
+{
+	struct device_node *child;
+
+	for_each_child_of_node(np, child) {
+		if (of_device_is_compatible(child, gpio_compat)) {
+			info->nbanks++;
+		} else {
+			info->nfunctions++;
+			info->ngroups += of_get_child_count(child);
+		}
+	}
+}
+
+static int __devinit at91_pinctrl_mux_mask(struct at91_pinctrl *info,
+					  struct device_node *np)
+{
+	int ret = 0;
+	int size;
+	const const __be32 *list;
+
+	list = of_get_property(np, "atmel,mux-mask", &size);
+	if (!list) {
+		dev_err(info->dev, "can not read the mux-mask of %d\n", size);
+		return -EINVAL;
+	}
+
+	size /= sizeof(*list);
+	if (!size || size % info->nbanks) {
+		dev_err(info->dev, "wrong mux mask array should be by %d\n", info->nbanks);
+		return -EINVAL;
+	}
+	info->nmux = size / info->nbanks;
+
+	info->mux_mask = devm_kzalloc(info->dev, sizeof(u32) * size, GFP_KERNEL);
+	if (!info->mux_mask) {
+		dev_err(info->dev, "could not alloc mux_mask\n");
+		return -ENOMEM;
+	}
+
+	ret = of_property_read_u32_array(np, "atmel,mux-mask",
+					  info->mux_mask, size);
+	if (ret)
+		dev_err(info->dev, "can not read the mux-mask of %d\n", size);
+	return ret;
+}
+
+static int __devinit at91_pinctrl_parse_groups(struct device_node *np,
+				struct at91_pin_group *grp,
+				struct at91_pinctrl *info,
+				u32 index)
+{
+	struct at91_pmx_pin *pin;
+	int size;
+	const const __be32 *list;
+	int i, j;
+
+	dev_dbg(info->dev, "group(%d): %s\n", index, np->name);
+
+	/* Initialise group */
+	grp->name = np->name;
+
+	/*
+	 * the binding format is atmel,pins = <bank pin mux CONFIG ...>,
+	 * do sanity check and calculate pins number
+	 */
+	list = of_get_property(np, "atmel,pins", &size);
+	/* we do not check return since it's safe node passed down */
+	size /= sizeof(*list);
+	if (!size || size % 4) {
+		dev_err(info->dev, "wrong pins number or pins and configs should be by 4\n");
+		return -EINVAL;
+	}
+
+	grp->npins = size / 4;
+	pin = grp->pins_conf = devm_kzalloc(info->dev, grp->npins * sizeof(struct at91_pmx_pin),
+				GFP_KERNEL);
+	grp->pins = devm_kzalloc(info->dev, grp->npins * sizeof(unsigned int),
+				GFP_KERNEL);
+	if (!grp->pins_conf || !grp->pins)
+		return -ENOMEM;
+
+	for (i = 0, j = 0; i < size; i += 4, j++) {
+		pin->bank = be32_to_cpu(*list++);
+		pin->pin = be32_to_cpu(*list++);
+		grp->pins[j] = pin->bank * MAX_NB_GPIO_PER_BANK + pin->pin;
+		pin->mux = be32_to_cpu(*list++);
+		pin->conf = be32_to_cpu(*list++);
+
+		at91_pin_dbg(info->dev, pin);
+		pin++;
+	}
+
+	return 0;
+}
+
+static int __devinit at91_pinctrl_parse_functions(struct device_node *np,
+			struct at91_pinctrl *info, u32 index)
+{
+	struct device_node *child;
+	struct at91_pmx_func *func;
+	struct at91_pin_group *grp;
+	int ret;
+	static u32 grp_index;
+	u32 i = 0;
+
+	dev_dbg(info->dev, "parse function(%d): %s\n", index, np->name);
+
+	func = &info->functions[index];
+
+	/* Initialise function */
+	func->name = np->name;
+	func->ngroups = of_get_child_count(np);
+	if (func->ngroups <= 0) {
+		dev_err(info->dev, "no groups defined\n");
+		return -EINVAL;
+	}
+	func->groups = devm_kzalloc(info->dev,
+			func->ngroups * sizeof(char *), GFP_KERNEL);
+	if (!func->groups)
+		return -ENOMEM;
+
+	for_each_child_of_node(np, child) {
+		func->groups[i] = child->name;
+		grp = &info->groups[grp_index++];
+		ret = at91_pinctrl_parse_groups(child, grp, info, i++);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static struct of_device_id at91_pinctrl_of_match[] __devinitdata = {
+	{ .compatible = "atmel,at91sam9x5-pinctrl", .data = &at91sam9x5_ops },
+	{ .compatible = "atmel,at91rm9200-pinctrl", .data = &at91rm9200_ops },
+	{ /* sentinel */ }
+};
+
+static int __devinit at91_pinctrl_probe_dt(struct platform_device *pdev,
+					   struct at91_pinctrl *info)
+{
+	int ret = 0;
+	int i, j;
+	uint32_t *tmp;
+	struct device_node *np = pdev->dev.of_node;
+	struct device_node *child;
+
+	if (!np)
+		return -ENODEV;
+
+	info->dev = &pdev->dev;
+	info->ops = (struct at91_pinctrl_mux_ops*)
+		of_match_device(at91_pinctrl_of_match, &pdev->dev)->data;
+	at91_pinctrl_child_count(info, np);
+
+	if (info->nbanks < 1) {
+		dev_err(&pdev->dev, "you need to specify atleast one gpio-controller\n");
+		return -EINVAL;
+	}
+
+	ret = at91_pinctrl_mux_mask(info, np);
+	if (ret)
+		return ret;
+
+	dev_dbg(&pdev->dev, "nmux = %d\n", info->nmux);
+
+	dev_dbg(&pdev->dev, "mux-mask\n");
+	tmp = info->mux_mask;
+	for (i = 0; i < info->nbanks; i++) {
+		for (j = 0; j < info->nmux; j++, tmp++) {
+			dev_dbg(&pdev->dev, "%d:%d\t0x%x\n", i, j, tmp[0]);
+		}
+	}
+
+	dev_dbg(&pdev->dev, "nfunctions = %d\n", info->nfunctions);
+	dev_dbg(&pdev->dev, "ngroups = %d\n", info->ngroups);
+	info->functions = devm_kzalloc(&pdev->dev, info->nfunctions * sizeof(struct at91_pmx_func),
+					GFP_KERNEL);
+	if (!info->functions)
+		return -ENOMEM;
+
+	info->groups = devm_kzalloc(&pdev->dev, info->ngroups * sizeof(struct at91_pin_group),
+					GFP_KERNEL);
+	if (!info->groups)
+		return -ENOMEM;
+
+	dev_dbg(&pdev->dev, "nbanks = %d\n", info->nbanks);
+	dev_dbg(&pdev->dev, "nfunctions = %d\n", info->nfunctions);
+	dev_dbg(&pdev->dev, "ngroups = %d\n", info->ngroups);
+
+	i = 0;
+
+	for_each_child_of_node(np, child) {
+		if (of_device_is_compatible(child, gpio_compat))
+			continue;
+		ret = at91_pinctrl_parse_functions(child, info, i++);
+		if (ret) {
+			dev_err(&pdev->dev, "failed to parse function\n");
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static int __devinit at91_pinctrl_probe(struct platform_device *pdev)
+{
+	struct at91_pinctrl *info;
+	struct pinctrl_pin_desc *pdesc;
+	int ret, i, j ,k;
+
+	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	ret = at91_pinctrl_probe_dt(pdev, info);
+	if (ret)
+		return ret;
+
+	/*
+	 * We need all the GPIO drivers to probe FIRST, or we will not be able
+	 * to obtain references to the struct gpio_chip * for them, and we
+	 * need this to proceed.
+	 */
+	for (i = 0; i < info->nbanks; i++) {
+		if (!gpio_chips[i]) {
+			dev_warn(&pdev->dev, "GPIO chip %d not registered yet\n", i);
+			devm_kfree(&pdev->dev, info);
+			return -EPROBE_DEFER;
+		}
+	}
+
+	at91_pinctrl_desc.name = dev_name(&pdev->dev);
+	at91_pinctrl_desc.npins = info->nbanks * MAX_NB_GPIO_PER_BANK;
+	at91_pinctrl_desc.pins = pdesc =
+		devm_kzalloc(&pdev->dev, sizeof(*pdesc) * at91_pinctrl_desc.npins, GFP_KERNEL);
+
+	if (!at91_pinctrl_desc.pins)
+		return -ENOMEM;
+
+	for (i = 0 , k = 0; i < info->nbanks; i++) {
+		for (j = 0; j < MAX_NB_GPIO_PER_BANK; j++, k++) {
+			pdesc->number = k;
+			pdesc->name = kasprintf(GFP_KERNEL, "pio%c%d", i + 'A', j);
+			pdesc++;
+		}
+	}
+
+	platform_set_drvdata(pdev, info);
+	info->pctl = pinctrl_register(&at91_pinctrl_desc, &pdev->dev, info);
+
+	if (!info->pctl) {
+		dev_err(&pdev->dev, "could not register AT91 pinctrl driver\n");
+		ret = -EINVAL;
+		goto err;
+	}
+
+	/* We will handle a range of GPIO pins */
+	for (i = 0; i < info->nbanks; i++)
+		pinctrl_add_gpio_range(info->pctl, &gpio_chips[i]->range);
+
+	dev_info(&pdev->dev, "initialized AT91 pinctrl driver\n");
+
+	return 0;
+
+err:
+	return ret;
+}
+
+static int __devexit at91_pinctrl_remove(struct platform_device *pdev)
+{
+	struct at91_pinctrl *info = platform_get_drvdata(pdev);
+
+	pinctrl_unregister(info->pctl);
+
+	return 0;
+}
+
+static int at91_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+	/*
+	 * Map back to global GPIO space and request muxing, the direction
+	 * parameter does not matter for this controller.
+	 */
+	int gpio = chip->base + offset;
+	int bank = chip->base / chip->ngpio;
+
+	dev_dbg(chip->dev, "%s:%d pio%c%d(%d)\n", __func__, __LINE__,
+		 'A' + bank, offset, gpio);
+
+	return pinctrl_request_gpio(gpio);
+}
+
+static void at91_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+	int gpio = chip->base + offset;
+
+	pinctrl_free_gpio(gpio);
+}
+
+static int at91_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
+	void __iomem *pio = at91_gpio->regbase;
+	unsigned mask = 1 << offset;
+
+	writel_relaxed(mask, pio + PIO_ODR);
+	return 0;
+}
+
+static int at91_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
+	void __iomem *pio = at91_gpio->regbase;
+	unsigned mask = 1 << offset;
+	u32 pdsr;
+
+	pdsr = readl_relaxed(pio + PIO_PDSR);
+	return (pdsr & mask) != 0;
+}
+
+static void at91_gpio_set(struct gpio_chip *chip, unsigned offset,
+				int val)
+{
+	struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
+	void __iomem *pio = at91_gpio->regbase;
+	unsigned mask = 1 << offset;
+
+	writel_relaxed(mask, pio + (val ? PIO_SODR : PIO_CODR));
+}
+
+static int at91_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
+				int val)
+{
+	struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
+	void __iomem *pio = at91_gpio->regbase;
+	unsigned mask = 1 << offset;
+
+	writel_relaxed(mask, pio + (val ? PIO_SODR : PIO_CODR));
+	writel_relaxed(mask, pio + PIO_OER);
+
+	return 0;
+}
+
+static int at91_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
+	int virq;
+
+	if (offset < chip->ngpio)
+		virq = irq_create_mapping(at91_gpio->domain, offset);
+	else
+		virq = -ENXIO;
+
+	dev_dbg(chip->dev, "%s: request IRQ for GPIO %d, return %d\n",
+				chip->label, offset + chip->base, virq);
+	return virq;
+}
+
+#ifdef CONFIG_DEBUG_FS
+static void at91_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
+{
+	enum at91_mux mode;
+	int i;
+	struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
+	void __iomem *pio = at91_gpio->regbase;
+
+	for (i = 0; i < chip->ngpio; i++) {
+		unsigned pin = chip->base + i;
+		unsigned mask = pin_to_mask(pin);
+		const char *gpio_label;
+		u32 pdsr;
+
+		gpio_label = gpiochip_is_requested(chip, i);
+		if (!gpio_label)
+			continue;
+		mode = at91_gpio->ops->get_periph(pio, mask);
+		seq_printf(s, "[%s] GPIO%s%d: ",
+			   gpio_label, chip->label, i);
+		if (mode == AT91_MUX_GPIO) {
+			pdsr = readl_relaxed(pio + PIO_PDSR);
+
+			seq_printf(s, "[gpio] %s\n",
+				   pdsr & mask ?
+				   "set" : "clear");
+		} else {
+			seq_printf(s, "[periph %c]\n",
+				   mode + 'A' - 1);
+		}
+	}
+}
+#else
+#define at91_gpio_dbg_show	NULL
+#endif
+
+/* Several AIC controller irqs are dispatched through this GPIO handler.
+ * To use any AT91_PIN_* as an externally triggered IRQ, first call
+ * at91_set_gpio_input() then maybe enable its glitch filter.
+ * Then just request_irq() with the pin ID; it works like any ARM IRQ
+ * handler.
+ * First implementation always triggers on rising and falling edges
+ * whereas the newer PIO3 can be additionally configured to trigger on
+ * level, edge with any polarity.
+ *
+ * Alternatively, certain pins may be used directly as IRQ0..IRQ6 after
+ * configuring them with at91_set_a_periph() or at91_set_b_periph().
+ * IRQ0..IRQ6 should be configurable, e.g. level vs edge triggering.
+ */
+
+static void gpio_irq_mask(struct irq_data *d)
+{
+	struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(d);
+	void __iomem	*pio = at91_gpio->regbase;
+	unsigned	mask = 1 << d->hwirq;
+
+	if (pio)
+		writel_relaxed(mask, pio + PIO_IDR);
+}
+
+static void gpio_irq_unmask(struct irq_data *d)
+{
+	struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(d);
+	void __iomem	*pio = at91_gpio->regbase;
+	unsigned	mask = 1 << d->hwirq;
+
+	if (pio)
+		writel_relaxed(mask, pio + PIO_IER);
+}
+
+static int gpio_irq_type(struct irq_data *d, unsigned type)
+{
+	switch (type) {
+	case IRQ_TYPE_NONE:
+	case IRQ_TYPE_EDGE_BOTH:
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
+
+/* Alternate irq type for PIO3 support */
+static int alt_gpio_irq_type(struct irq_data *d, unsigned type)
+{
+	struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(d);
+	void __iomem	*pio = at91_gpio->regbase;
+	unsigned	mask = 1 << d->hwirq;
+
+	switch (type) {
+	case IRQ_TYPE_EDGE_RISING:
+		writel_relaxed(mask, pio + PIO_ESR);
+		writel_relaxed(mask, pio + PIO_REHLSR);
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		writel_relaxed(mask, pio + PIO_ESR);
+		writel_relaxed(mask, pio + PIO_FELLSR);
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		writel_relaxed(mask, pio + PIO_LSR);
+		writel_relaxed(mask, pio + PIO_FELLSR);
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		writel_relaxed(mask, pio + PIO_LSR);
+		writel_relaxed(mask, pio + PIO_REHLSR);
+		break;
+	case IRQ_TYPE_EDGE_BOTH:
+		/*
+		 * disable additional interrupt modes:
+		 * fall back to default behavior
+		 */
+		writel_relaxed(mask, pio + PIO_AIMDR);
+		return 0;
+	case IRQ_TYPE_NONE:
+	default:
+		pr_warn("AT91: No type for irq %d\n", gpio_to_irq(d->irq));
+		return -EINVAL;
+	}
+
+	/* enable additional interrupt modes */
+	writel_relaxed(mask, pio + PIO_AIMER);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int gpio_irq_set_wake(struct irq_data *d, unsigned state)
+{
+	struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(d);
+	unsigned	bank = at91_gpio->pioc_idx;
+
+	if (unlikely(bank >= MAX_GPIO_BANKS))
+		return -EINVAL;
+
+	irq_set_irq_wake(at91_gpio->pioc_virq, state);
+
+	return 0;
+}
+#else
+#define gpio_irq_set_wake	NULL
+#endif
+
+static struct irq_chip gpio_irqchip = {
+	.name		= "GPIO",
+	.irq_disable	= gpio_irq_mask,
+	.irq_mask	= gpio_irq_mask,
+	.irq_unmask	= gpio_irq_unmask,
+	/* .irq_set_type is set dynamically */
+	.irq_set_wake	= gpio_irq_set_wake,
+};
+
+static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
+{
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+	struct irq_data *idata = irq_desc_get_irq_data(desc);
+	struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(idata);
+	void __iomem	*pio = at91_gpio->regbase;
+	unsigned long	isr;
+	int		n;
+
+	chained_irq_enter(chip, desc);
+	for (;;) {
+		/* Reading ISR acks pending (edge triggered) GPIO interrupts.
+		 * When there none are pending, we're finished unless we need
+		 * to process multiple banks (like ID_PIOCDE on sam9263).
+		 */
+		isr = readl_relaxed(pio + PIO_ISR) & readl_relaxed(pio + PIO_IMR);
+		if (!isr) {
+			if (!at91_gpio->next)
+				break;
+			at91_gpio = at91_gpio->next;
+			pio = at91_gpio->regbase;
+			continue;
+		}
+
+		for_each_set_bit(n, &isr, BITS_PER_LONG) {
+			generic_handle_irq(irq_find_mapping(at91_gpio->domain, n));
+		}
+	}
+	chained_irq_exit(chip, desc);
+	/* now it may re-trigger */
+}
+
+/*
+ * This lock class tells lockdep that GPIO irqs are in a different
+ * category than their parents, so it won't report false recursion.
+ */
+static struct lock_class_key gpio_lock_class;
+
+static int at91_gpio_irq_map(struct irq_domain *h, unsigned int virq,
+							irq_hw_number_t hw)
+{
+	struct at91_gpio_chip	*at91_gpio = h->host_data;
+
+	irq_set_lockdep_class(virq, &gpio_lock_class);
+
+	/*
+	 * Can use the "simple" and not "edge" handler since it's
+	 * shorter, and the AIC handles interrupts sanely.
+	 */
+	irq_set_chip_and_handler(virq, &gpio_irqchip,
+				 handle_simple_irq);
+	set_irq_flags(virq, IRQF_VALID);
+	irq_set_chip_data(virq, at91_gpio);
+
+	return 0;
+}
+
+static int at91_gpio_irq_domain_xlate(struct irq_domain *d,
+				      struct device_node *ctrlr,
+				      const u32 *intspec, unsigned int intsize,
+				      irq_hw_number_t *out_hwirq,
+				      unsigned int *out_type)
+{
+	struct at91_gpio_chip *at91_gpio = d->host_data;
+	int ret;
+	int pin = at91_gpio->chip.base + intspec[0];
+
+	if (WARN_ON(intsize < 2))
+		return -EINVAL;
+	*out_hwirq = intspec[0];
+	*out_type = intspec[1] & IRQ_TYPE_SENSE_MASK;
+
+	ret = gpio_request(pin, ctrlr->full_name);
+	if (ret)
+		return ret;
+
+	ret = gpio_direction_input(pin);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static struct irq_domain_ops at91_gpio_ops = {
+	.map	= at91_gpio_irq_map,
+	.xlate	= at91_gpio_irq_domain_xlate,
+};
+
+static int at91_gpio_of_irq_setup(struct device_node *node,
+				  struct at91_gpio_chip *at91_gpio)
+{
+	struct at91_gpio_chip	*prev = NULL;
+	struct irq_data		*d = irq_get_irq_data(at91_gpio->pioc_virq);
+
+	at91_gpio->pioc_hwirq = irqd_to_hwirq(d);
+
+	/* Setup proper .irq_set_type function */
+	gpio_irqchip.irq_set_type = at91_gpio->ops->irq_type;
+
+	/* Disable irqs of this PIO controller */
+	writel_relaxed(~0, at91_gpio->regbase + PIO_IDR);
+
+	/* Setup irq domain */
+	at91_gpio->domain = irq_domain_add_linear(node, at91_gpio->chip.ngpio,
+						&at91_gpio_ops, at91_gpio);
+	if (!at91_gpio->domain)
+		panic("at91_gpio.%d: couldn't allocate irq domain (DT).\n",
+			at91_gpio->pioc_idx);
+
+	/* Setup chained handler */
+	if (at91_gpio->pioc_idx)
+		prev = gpio_chips[at91_gpio->pioc_idx - 1];
+
+	/* The toplevel handler handles one bank of GPIOs, except
+	 * on some SoC it can handles up to three...
+	 * We only set up the handler for the first of the list.
+	 */
+	if (prev && prev->next == at91_gpio)
+		return 0;
+
+	irq_set_chip_data(at91_gpio->pioc_virq, at91_gpio);
+	irq_set_chained_handler(at91_gpio->pioc_virq, gpio_irq_handler);
+
+	return 0;
+}
+
+/* This structure is replicated for each GPIO block allocated at probe time */
+static struct gpio_chip at91_gpio_template = {
+	.request		= at91_gpio_request,
+	.free			= at91_gpio_free,
+	.direction_input	= at91_gpio_direction_input,
+	.get			= at91_gpio_get,
+	.direction_output	= at91_gpio_direction_output,
+	.set			= at91_gpio_set,
+	.to_irq			= at91_gpio_to_irq,
+	.dbg_show		= at91_gpio_dbg_show,
+	.can_sleep		= 0,
+	.ngpio			= MAX_NB_GPIO_PER_BANK,
+};
+
+static void __devinit at91_gpio_probe_fixup(void)
+{
+	unsigned i;
+	struct at91_gpio_chip *at91_gpio, *last = NULL;
+
+	for (i = 0; i < gpio_banks; i++) {
+		at91_gpio = gpio_chips[i];
+
+		/*
+		 * GPIO controller are grouped on some SoC:
+		 * PIOC, PIOD and PIOE can share the same IRQ line
+		 */
+		if (last && last->pioc_virq == at91_gpio->pioc_virq)
+			last->next = at91_gpio;
+		last = at91_gpio;
+	}
+}
+
+static struct of_device_id at91_gpio_of_match[] __devinitdata = {
+	{ .compatible = "atmel,at91sam9x5-gpio", .data = &at91sam9x5_ops, },
+	{ .compatible = "atmel,at91rm9200-gpio", .data = &at91rm9200_ops },
+	{ /* sentinel */ }
+};
+
+static int __devinit at91_gpio_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct resource *res;
+	struct at91_gpio_chip *at91_chip = NULL;
+	struct gpio_chip *chip;
+	struct pinctrl_gpio_range *range;
+	int ret = 0;
+	int irq, i;
+	int alias_idx = of_alias_get_id(np, "gpio");
+	uint32_t ngpio;
+	char **names;
+
+	BUG_ON(alias_idx >= ARRAY_SIZE(gpio_chips));
+	if (gpio_chips[alias_idx]) {
+		ret = -EBUSY;
+		goto err;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		ret = -ENOENT;
+		goto err;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		ret = irq;
+		goto err;
+	}
+
+	at91_chip = devm_kzalloc(&pdev->dev, sizeof(*at91_chip), GFP_KERNEL);
+	if (!at91_chip) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	at91_chip->regbase = devm_request_and_ioremap(&pdev->dev, res);
+	if (!at91_chip->regbase) {
+		dev_err(&pdev->dev, "failed to map registers, ignoring.\n");
+		ret = -EBUSY;
+		goto err;
+	}
+
+	at91_chip->ops = (struct at91_pinctrl_mux_ops*)
+		of_match_device(at91_gpio_of_match, &pdev->dev)->data;
+	at91_chip->pioc_virq = irq;
+	at91_chip->pioc_idx = alias_idx;
+
+	at91_chip->clock = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(at91_chip->clock)) {
+		dev_err(&pdev->dev, "failed to get clock, ignoring.\n");
+		goto err;
+	}
+
+	if (clk_prepare(at91_chip->clock))
+		goto clk_prep_err;
+
+	/* enable PIO controller's clock */
+	if (clk_enable(at91_chip->clock)) {
+		dev_err(&pdev->dev, "failed to enable clock, ignoring.\n");
+		goto clk_err;
+	}
+
+	at91_chip->chip = at91_gpio_template;
+
+	chip = &at91_chip->chip;
+	chip->of_node = np;
+	chip->label = dev_name(&pdev->dev);
+	chip->dev = &pdev->dev;
+	chip->owner = THIS_MODULE;
+	chip->base = alias_idx * MAX_NB_GPIO_PER_BANK;
+
+	if (!of_property_read_u32(np, "#gpio-lines", &ngpio)) {
+		if (ngpio >= MAX_NB_GPIO_PER_BANK)
+			pr_err("at91_gpio.%d, gpio-nb >= %d failback to %d\n",
+			       alias_idx, MAX_NB_GPIO_PER_BANK, MAX_NB_GPIO_PER_BANK);
+		else
+			chip->ngpio = ngpio;
+	}
+
+	names = devm_kzalloc(&pdev->dev, sizeof(char*) * chip->ngpio, GFP_KERNEL);
+
+	if (!names) {
+		ret = -ENOMEM;
+		goto clk_err;
+	}
+
+	for (i = 0; i < chip->ngpio; i++)
+		names[i] = kasprintf(GFP_KERNEL, "pio%c%d", alias_idx + 'A', i);
+
+	chip->names = (const char*const*)names;
+
+	range = &at91_chip->range;
+	range->name = chip->label;
+	range->id = alias_idx;
+	range->pin_base = range->base = range->id * MAX_NB_GPIO_PER_BANK;
+
+	range->npins = chip->ngpio;
+	range->gc = chip;
+
+	ret = gpiochip_add(chip);
+	if (ret)
+		goto clk_err;
+
+	gpio_chips[alias_idx] = at91_chip;
+	gpio_banks = max(gpio_banks, alias_idx + 1);
+
+	at91_gpio_probe_fixup();
+
+	at91_gpio_of_irq_setup(np, at91_chip);
+
+	dev_info(&pdev->dev, "at address %p\n", at91_chip->regbase);
+
+	return 0;
+
+clk_err:
+	clk_unprepare(at91_chip->clock);
+clk_prep_err:
+	clk_put(at91_chip->clock);
+err:
+	dev_err(&pdev->dev, "Failure %i for GPIO %i\n", ret, alias_idx);
+
+	return ret;
+}
+
+static struct platform_driver at91_gpio_driver = {
+	.driver = {
+		.name = "gpio-at91",
+		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(at91_gpio_of_match),
+	},
+	.probe = at91_gpio_probe,
+};
+
+static struct platform_driver at91_pinctrl_driver = {
+	.driver = {
+		.name = "pinctrl-at91",
+		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(at91_pinctrl_of_match),
+	},
+	.probe = at91_pinctrl_probe,
+	.remove = __devexit_p(at91_pinctrl_remove),
+};
+
+static int __init at91_pinctrl_init(void)
+{
+	int ret;
+
+	ret = platform_driver_register(&at91_gpio_driver);
+	if (ret)
+		return ret;
+	return platform_driver_register(&at91_pinctrl_driver);
+}
+arch_initcall(at91_pinctrl_init);
+
+static void __exit at91_pinctrl_exit(void)
+{
+	platform_driver_unregister(&at91_pinctrl_driver);
+}
+
+module_exit(at91_pinctrl_exit);
+MODULE_AUTHOR("Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>");
+MODULE_DESCRIPTION("Atmel AT91 pinctrl driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pinctrl/pinctrl-bcm2835.c b/drivers/pinctrl/pinctrl-bcm2835.c
index dd569e1..0b0e9b4 100644
--- a/drivers/pinctrl/pinctrl-bcm2835.c
+++ b/drivers/pinctrl/pinctrl-bcm2835.c
@@ -916,7 +916,7 @@
 	return 0;
 }
 
-struct pinconf_ops bcm2835_pinconf_ops = {
+static struct pinconf_ops bcm2835_pinconf_ops = {
 	.pin_config_get = bcm2835_pinconf_get,
 	.pin_config_set = bcm2835_pinconf_set,
 };
diff --git a/drivers/pinctrl/pinctrl-coh901.c b/drivers/pinctrl/pinctrl-coh901.c
index b446c96..fbb3715 100644
--- a/drivers/pinctrl/pinctrl-coh901.c
+++ b/drivers/pinctrl/pinctrl-coh901.c
@@ -13,6 +13,7 @@
 #include <linux/delay.h>
 #include <linux/errno.h>
 #include <linux/io.h>
+#include <linux/irqdomain.h>
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/platform_device.h>
@@ -64,10 +65,8 @@
 	struct gpio_chip chip;
 	struct list_head port_list;
 	struct clk *clk;
-	struct resource *memres;
 	void __iomem *base;
 	struct device *dev;
-	int irq_base;
 	u32 stride;
 	/* Register offsets */
 	u32 pcr;
@@ -83,6 +82,7 @@
 	struct list_head node;
 	struct u300_gpio *gpio;
 	char name[8];
+	struct irq_domain *domain;
 	int irq;
 	int number;
 	u8 toggle_edge_mode;
@@ -314,10 +314,30 @@
 static int u300_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
 {
 	struct u300_gpio *gpio = to_u300_gpio(chip);
-	int retirq = gpio->irq_base + offset;
+	int portno = offset >> 3;
+	struct u300_gpio_port *port = NULL;
+	struct list_head *p;
+	int retirq;
 
-	dev_dbg(gpio->dev, "request IRQ for GPIO %d, return %d\n", offset,
-		retirq);
+	list_for_each(p, &gpio->port_list) {
+		port = list_entry(p, struct u300_gpio_port, node);
+		if (port->number == portno)
+			break;
+	}
+	if (port == NULL) {
+		dev_err(gpio->dev, "could not locate port for GPIO %d IRQ\n",
+			offset);
+		return -EINVAL;
+	}
+
+	/*
+	 * The local hwirqs on the port are the lower three bits, there
+	 * are exactly 8 IRQs per port since they are 8-bit
+	 */
+	retirq = irq_find_mapping(port->domain, (offset & 0x7));
+
+	dev_dbg(gpio->dev, "request IRQ for GPIO %d, return %d from port %d\n",
+		offset, retirq, port->number);
 	return retirq;
 }
 
@@ -467,7 +487,7 @@
 {
 	struct u300_gpio_port *port = irq_data_get_irq_chip_data(d);
 	struct u300_gpio *gpio = port->gpio;
-	int offset = d->irq - gpio->irq_base;
+	int offset = (port->number << 3) + d->hwirq;
 	u32 val;
 
 	if ((trigger & IRQF_TRIGGER_RISING) &&
@@ -503,10 +523,12 @@
 {
 	struct u300_gpio_port *port = irq_data_get_irq_chip_data(d);
 	struct u300_gpio *gpio = port->gpio;
-	int offset = d->irq - gpio->irq_base;
+	int offset = (port->number << 3) + d->hwirq;
 	u32 val;
 	unsigned long flags;
 
+	dev_dbg(gpio->dev, "enable IRQ for hwirq %lu on port %s, offset %d\n",
+		 d->hwirq, port->name, offset);
 	local_irq_save(flags);
 	val = readl(U300_PIN_REG(offset, ien));
 	writel(val | U300_PIN_BIT(offset), U300_PIN_REG(offset, ien));
@@ -517,7 +539,7 @@
 {
 	struct u300_gpio_port *port = irq_data_get_irq_chip_data(d);
 	struct u300_gpio *gpio = port->gpio;
-	int offset = d->irq - gpio->irq_base;
+	int offset = (port->number << 3) + d->hwirq;
 	u32 val;
 	unsigned long flags;
 
@@ -555,8 +577,7 @@
 		int irqoffset;
 
 		for_each_set_bit(irqoffset, &val, U300_GPIO_PINS_PER_PORT) {
-			int pin_irq = gpio->irq_base + (port->number << 3)
-				+ irqoffset;
+			int pin_irq = irq_find_mapping(port->domain, irqoffset);
 			int offset = pinoffset + irqoffset;
 
 			dev_dbg(gpio->dev, "GPIO IRQ %d on pin %d\n",
@@ -631,64 +652,86 @@
 	list_for_each_safe(p, n, &gpio->port_list) {
 		port = list_entry(p, struct u300_gpio_port, node);
 		list_del(&port->node);
+		if (port->domain)
+			irq_domain_remove(port->domain);
 		kfree(port);
 	}
 }
 
+/*
+ * Here we map a GPIO in the local gpio_chip pin space to a pin in
+ * the local pinctrl pin space. The pin controller used is
+ * pinctrl-u300.
+ */
+struct coh901_pinpair {
+	unsigned int offset;
+	unsigned int pin_base;
+};
+
+#define COH901_PINRANGE(a, b) { .offset = a, .pin_base = b }
+
+static struct coh901_pinpair coh901_pintable[] = {
+	COH901_PINRANGE(10, 426),
+	COH901_PINRANGE(11, 180),
+	COH901_PINRANGE(12, 165), /* MS/MMC card insertion */
+	COH901_PINRANGE(13, 179),
+	COH901_PINRANGE(14, 178),
+	COH901_PINRANGE(16, 194),
+	COH901_PINRANGE(17, 193),
+	COH901_PINRANGE(18, 192),
+	COH901_PINRANGE(19, 191),
+	COH901_PINRANGE(20, 186),
+	COH901_PINRANGE(21, 185),
+	COH901_PINRANGE(22, 184),
+	COH901_PINRANGE(23, 183),
+	COH901_PINRANGE(24, 182),
+	COH901_PINRANGE(25, 181),
+};
+
 static int __init u300_gpio_probe(struct platform_device *pdev)
 {
 	struct u300_gpio_platform *plat = dev_get_platdata(&pdev->dev);
 	struct u300_gpio *gpio;
+	struct resource *memres;
 	int err = 0;
 	int portno;
 	u32 val;
 	u32 ifr;
 	int i;
 
-	gpio = kzalloc(sizeof(struct u300_gpio), GFP_KERNEL);
-	if (gpio == NULL) {
-		dev_err(&pdev->dev, "failed to allocate memory\n");
+	gpio = devm_kzalloc(&pdev->dev, sizeof(struct u300_gpio), GFP_KERNEL);
+	if (gpio == NULL)
 		return -ENOMEM;
-	}
 
 	gpio->chip = u300_gpio_chip;
 	gpio->chip.ngpio = plat->ports * U300_GPIO_PINS_PER_PORT;
-	gpio->irq_base = plat->gpio_irq_base;
 	gpio->chip.dev = &pdev->dev;
 	gpio->chip.base = plat->gpio_base;
 	gpio->dev = &pdev->dev;
 
-	/* Get GPIO clock */
-	gpio->clk = clk_get(gpio->dev, NULL);
+	memres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!memres) {
+		dev_err(gpio->dev, "could not get GPIO memory resource\n");
+		return -ENODEV;
+	}
+
+	gpio->base = devm_request_and_ioremap(&pdev->dev, memres);
+	if (!gpio->base) {
+		dev_err(gpio->dev, "could not get remap memory\n");
+		return -ENOMEM;
+	}
+
+	gpio->clk = devm_clk_get(gpio->dev, NULL);
 	if (IS_ERR(gpio->clk)) {
 		err = PTR_ERR(gpio->clk);
 		dev_err(gpio->dev, "could not get GPIO clock\n");
-		goto err_no_clk;
+		return err;
 	}
+
 	err = clk_prepare_enable(gpio->clk);
 	if (err) {
 		dev_err(gpio->dev, "could not enable GPIO clock\n");
-		goto err_no_clk_enable;
-	}
-
-	gpio->memres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!gpio->memres) {
-		dev_err(gpio->dev, "could not get GPIO memory resource\n");
-		err = -ENODEV;
-		goto err_no_resource;
-	}
-
-	if (!request_mem_region(gpio->memres->start,
-				resource_size(gpio->memres),
-				"GPIO Controller")) {
-		err = -ENODEV;
-		goto err_no_ioregion;
-	}
-
-	gpio->base = ioremap(gpio->memres->start, resource_size(gpio->memres));
-	if (!gpio->base) {
-		err = -ENOMEM;
-		goto err_no_ioremap;
+		return err;
 	}
 
 	dev_info(gpio->dev,
@@ -732,18 +775,28 @@
 		port->irq = platform_get_irq_byname(pdev,
 						    port->name);
 
-		dev_dbg(gpio->dev, "register IRQ %d for %s\n", port->irq,
+		dev_dbg(gpio->dev, "register IRQ %d for port %s\n", port->irq,
 			port->name);
 
+		port->domain = irq_domain_add_linear(pdev->dev.of_node,
+						     U300_GPIO_PINS_PER_PORT,
+						     &irq_domain_simple_ops,
+						     port);
+		if (!port->domain) {
+			err = -ENOMEM;
+			goto err_no_domain;
+		}
+
 		irq_set_chained_handler(port->irq, u300_gpio_irq_handler);
 		irq_set_handler_data(port->irq, port);
 
 		/* For each GPIO pin set the unique IRQ handler */
 		for (i = 0; i < U300_GPIO_PINS_PER_PORT; i++) {
-			int irqno = gpio->irq_base + (portno << 3) + i;
+			int irqno = irq_create_mapping(port->domain, i);
 
-			dev_dbg(gpio->dev, "handler for IRQ %d on %s\n",
-				irqno, port->name);
+			dev_dbg(gpio->dev, "GPIO%d on port %s gets IRQ %d\n",
+				gpio->chip.base + (port->number << 3) + i,
+				port->name, irqno);
 			irq_set_chip_and_handler(irqno, &u300_gpio_irqchip,
 						 handle_simple_irq);
 			set_irq_flags(irqno, IRQF_VALID);
@@ -763,32 +816,31 @@
 		goto err_no_chip;
 	}
 
-	/* Spawn pin controller device as child of the GPIO, pass gpio chip */
-	plat->pinctrl_device->dev.platform_data = &gpio->chip;
-	err = platform_device_register(plat->pinctrl_device);
-	if (err)
-		goto err_no_pinctrl;
+	/*
+	 * Add pinctrl pin ranges, the pin controller must be registered
+	 * at this point
+	 */
+	for (i = 0; i < ARRAY_SIZE(coh901_pintable); i++) {
+		struct coh901_pinpair *p = &coh901_pintable[i];
+
+		err = gpiochip_add_pin_range(&gpio->chip, "pinctrl-u300",
+					     p->offset, p->pin_base, 1);
+		if (err)
+			goto err_no_range;
+	}
 
 	platform_set_drvdata(pdev, gpio);
 
 	return 0;
 
-err_no_pinctrl:
+err_no_range:
 	err = gpiochip_remove(&gpio->chip);
 err_no_chip:
+err_no_domain:
 err_no_port:
 	u300_gpio_free_ports(gpio);
-	iounmap(gpio->base);
-err_no_ioremap:
-	release_mem_region(gpio->memres->start, resource_size(gpio->memres));
-err_no_ioregion:
-err_no_resource:
 	clk_disable_unprepare(gpio->clk);
-err_no_clk_enable:
-	clk_put(gpio->clk);
-err_no_clk:
-	kfree(gpio);
-	dev_info(&pdev->dev, "module ERROR:%d\n", err);
+	dev_err(&pdev->dev, "module ERROR:%d\n", err);
 	return err;
 }
 
@@ -806,13 +858,8 @@
 		return err;
 	}
 	u300_gpio_free_ports(gpio);
-	iounmap(gpio->base);
-	release_mem_region(gpio->memres->start,
-			   resource_size(gpio->memres));
 	clk_disable_unprepare(gpio->clk);
-	clk_put(gpio->clk);
 	platform_set_drvdata(pdev, NULL);
-	kfree(gpio);
 	return 0;
 }
 
diff --git a/drivers/pinctrl/pinctrl-exynos.c b/drivers/pinctrl/pinctrl-exynos.c
index 21362f4..6ff6652 100644
--- a/drivers/pinctrl/pinctrl-exynos.c
+++ b/drivers/pinctrl/pinctrl-exynos.c
@@ -36,6 +36,7 @@
 /* list of external wakeup controllers supported */
 static const struct of_device_id exynos_wkup_irq_ids[] = {
 	{ .compatible = "samsung,exynos4210-wakeup-eint", },
+	{ }
 };
 
 static void exynos_gpio_irq_unmask(struct irq_data *irqd)
diff --git a/drivers/pinctrl/pinctrl-falcon.c b/drivers/pinctrl/pinctrl-falcon.c
index ee73059..8ed20e8 100644
--- a/drivers/pinctrl/pinctrl-falcon.c
+++ b/drivers/pinctrl/pinctrl-falcon.c
@@ -322,7 +322,7 @@
 {
 }
 
-struct pinconf_ops falcon_pinconf_ops = {
+static struct pinconf_ops falcon_pinconf_ops = {
 	.pin_config_get			= falcon_pinconf_get,
 	.pin_config_set			= falcon_pinconf_set,
 	.pin_config_group_get		= falcon_pinconf_group_get,
diff --git a/drivers/pinctrl/pinctrl-imx.c b/drivers/pinctrl/pinctrl-imx.c
index 2bd771b..131d86d 100644
--- a/drivers/pinctrl/pinctrl-imx.c
+++ b/drivers/pinctrl/pinctrl-imx.c
@@ -71,7 +71,7 @@
 			break;
 	}
 
-	if (!pin_reg) {
+	if (i == info->npin_regs) {
 		dev_err(info->dev, "Pin(%s): unable to find pin reg map\n",
 			info->pins[pin].name);
 		return NULL;
@@ -397,7 +397,7 @@
 	}
 }
 
-struct pinconf_ops imx_pinconf_ops = {
+static struct pinconf_ops imx_pinconf_ops = {
 	.pin_config_get = imx_pinconf_get,
 	.pin_config_set = imx_pinconf_set,
 	.pin_config_dbg_show = imx_pinconf_dbg_show,
diff --git a/drivers/pinctrl/pinctrl-lantiq.c b/drivers/pinctrl/pinctrl-lantiq.c
index 07ba768..15f501d 100644
--- a/drivers/pinctrl/pinctrl-lantiq.c
+++ b/drivers/pinctrl/pinctrl-lantiq.c
@@ -46,8 +46,8 @@
 	return 0;
 }
 
-void ltq_pinctrl_dt_free_map(struct pinctrl_dev *pctldev,
-				struct pinctrl_map *map, unsigned num_maps)
+static void ltq_pinctrl_dt_free_map(struct pinctrl_dev *pctldev,
+				    struct pinctrl_map *map, unsigned num_maps)
 {
 	int i;
 
@@ -128,10 +128,10 @@
 	return ret;
 }
 
-int ltq_pinctrl_dt_node_to_map(struct pinctrl_dev *pctldev,
-				struct device_node *np_config,
-				struct pinctrl_map **map,
-				unsigned *num_maps)
+static int ltq_pinctrl_dt_node_to_map(struct pinctrl_dev *pctldev,
+				      struct device_node *np_config,
+				      struct pinctrl_map **map,
+				      unsigned *num_maps)
 {
 	struct pinctrl_map *tmp;
 	struct device_node *np;
@@ -275,16 +275,6 @@
 	return 0;
 }
 
-static void ltq_pmx_disable(struct pinctrl_dev *pctrldev,
-				unsigned func,
-				unsigned group)
-{
-	/*
-	 * Nothing to do here. However, pinconf_check_ops() requires this
-	 * callback to be defined.
-	 */
-}
-
 static int ltq_pmx_gpio_request_enable(struct pinctrl_dev *pctrldev,
 				struct pinctrl_gpio_range *range,
 				unsigned pin)
@@ -312,7 +302,6 @@
 	.get_function_name	= ltq_pmx_func_name,
 	.get_function_groups	= ltq_pmx_get_groups,
 	.enable			= ltq_pmx_enable,
-	.disable		= ltq_pmx_disable,
 	.gpio_request_enable	= ltq_pmx_gpio_request_enable,
 };
 
diff --git a/drivers/pinctrl/pinctrl-mxs.c b/drivers/pinctrl/pinctrl-mxs.c
index feef5d6..180f163 100644
--- a/drivers/pinctrl/pinctrl-mxs.c
+++ b/drivers/pinctrl/pinctrl-mxs.c
@@ -319,7 +319,7 @@
 		seq_printf(s, "0x%lx", config);
 }
 
-struct pinconf_ops mxs_pinconf_ops = {
+static struct pinconf_ops mxs_pinconf_ops = {
 	.pin_config_get = mxs_pinconf_get,
 	.pin_config_set = mxs_pinconf_set,
 	.pin_config_group_get = mxs_pinconf_group_get,
diff --git a/drivers/pinctrl/pinctrl-nomadik-db8500.c b/drivers/pinctrl/pinctrl-nomadik-db8500.c
index debaa75b..7d88ae3 100644
--- a/drivers/pinctrl/pinctrl-nomadik-db8500.c
+++ b/drivers/pinctrl/pinctrl-nomadik-db8500.c
@@ -475,8 +475,10 @@
 	DB8500_PIN_AG9, DB8500_PIN_AG8, DB8500_PIN_AF8 };
 static const unsigned hsit_a_2_pins[] = { DB8500_PIN_AJ9, DB8500_PIN_AH9,
 	DB8500_PIN_AG9, DB8500_PIN_AG8 };
-static const unsigned clkout_a_1_pins[] = { DB8500_PIN_AH7, DB8500_PIN_AJ6 };
-static const unsigned clkout_a_2_pins[] = { DB8500_PIN_AG7, DB8500_PIN_AF7 };
+static const unsigned clkout1_a_1_pins[] = { DB8500_PIN_AH7 };
+static const unsigned clkout1_a_2_pins[] = { DB8500_PIN_AG7 };
+static const unsigned clkout2_a_1_pins[] = { DB8500_PIN_AJ6 };
+static const unsigned clkout2_a_2_pins[] = { DB8500_PIN_AF7 };
 static const unsigned usb_a_1_pins[] = { DB8500_PIN_AF28, DB8500_PIN_AE29,
 	DB8500_PIN_AD29, DB8500_PIN_AC29, DB8500_PIN_AD28, DB8500_PIN_AD26,
 	DB8500_PIN_AE26, DB8500_PIN_AG29, DB8500_PIN_AE27, DB8500_PIN_AD27,
@@ -592,7 +594,8 @@
 	DB8500_PIN_C21, DB8500_PIN_A22, DB8500_PIN_B24 };
 static const unsigned usbsim_c_1_pins[] = { DB8500_PIN_D22 };
 static const unsigned mc4rstn_c_1_pins[] = { DB8500_PIN_AF25 };
-static const unsigned clkout_c_1_pins[] = { DB8500_PIN_AH13, DB8500_PIN_AH12 };
+static const unsigned clkout1_c_1_pins[] = { DB8500_PIN_AH13 };
+static const unsigned clkout2_c_1_pins[] = { DB8500_PIN_AH12 };
 static const unsigned i2c3_c_1_pins[] = { DB8500_PIN_AG12, DB8500_PIN_AH11 };
 static const unsigned spi0_c_1_pins[] = { DB8500_PIN_AH10, DB8500_PIN_AH9,
 					  DB8500_PIN_AG9, DB8500_PIN_AG8 };
@@ -600,14 +603,66 @@
 static const unsigned i2c3_c_2_pins[] = { DB8500_PIN_AG7, DB8500_PIN_AF7 };
 
 /* Other C1 column */
+static const unsigned u2rx_oc1_1_pins[] = { DB8500_PIN_AB2 };
+static const unsigned stmape_oc1_1_pins[] = { DB8500_PIN_AA4, DB8500_PIN_Y4,
+	DB8500_PIN_Y2, DB8500_PIN_AA2, DB8500_PIN_AA1 };
+static const unsigned remap0_oc1_1_pins[] = { DB8500_PIN_E1 };
+static const unsigned remap1_oc1_1_pins[] = { DB8500_PIN_E2 };
+static const unsigned ptma9_oc1_1_pins[] = { DB8500_PIN_G5, DB8500_PIN_G4,
+	DB8500_PIN_H4, DB8500_PIN_H3, DB8500_PIN_J3, DB8500_PIN_H2,
+	DB8500_PIN_J2, DB8500_PIN_H1 };
 static const unsigned kp_oc1_1_pins[] = { DB8500_PIN_C6, DB8500_PIN_B3,
 	DB8500_PIN_C4, DB8500_PIN_E6, DB8500_PIN_A3, DB8500_PIN_B6,
 	DB8500_PIN_D6, DB8500_PIN_B7 };
+static const unsigned rf_oc1_1_pins[] = { DB8500_PIN_D8, DB8500_PIN_D9 };
+static const unsigned hxclk_oc1_1_pins[] = { DB8500_PIN_D16 };
+static const unsigned uartmodrx_oc1_1_pins[] = { DB8500_PIN_B17 };
+static const unsigned uartmodtx_oc1_1_pins[] = { DB8500_PIN_C16 };
+static const unsigned stmmod_oc1_1_pins[] = { DB8500_PIN_C19, DB8500_PIN_C17,
+	DB8500_PIN_A18, DB8500_PIN_C18, DB8500_PIN_B19 };
+static const unsigned hxgpio_oc1_1_pins[] = { DB8500_PIN_D21, DB8500_PIN_D20,
+	DB8500_PIN_C20, DB8500_PIN_B21, DB8500_PIN_C21, DB8500_PIN_A22,
+	DB8500_PIN_B24, DB8500_PIN_C22 };
+static const unsigned rf_oc1_2_pins[] = { DB8500_PIN_C23, DB8500_PIN_D23 };
 static const unsigned spi2_oc1_1_pins[] = { DB8500_PIN_AH13, DB8500_PIN_AG12,
 	DB8500_PIN_AH12, DB8500_PIN_AH11 };
 static const unsigned spi2_oc1_2_pins[] = { DB8500_PIN_AH13, DB8500_PIN_AH12,
 	DB8500_PIN_AH11 };
 
+/* Other C2 column */
+static const unsigned sbag_oc2_1_pins[] = { DB8500_PIN_AA4, DB8500_PIN_AB2,
+	DB8500_PIN_Y4, DB8500_PIN_Y2, DB8500_PIN_AA2, DB8500_PIN_AA1 };
+static const unsigned etmr4_oc2_1_pins[] = { DB8500_PIN_G5, DB8500_PIN_G4,
+	DB8500_PIN_H4, DB8500_PIN_H3, DB8500_PIN_J3, DB8500_PIN_H2,
+	DB8500_PIN_J2, DB8500_PIN_H1 };
+static const unsigned ptma9_oc2_1_pins[] = { DB8500_PIN_D17, DB8500_PIN_D16,
+	DB8500_PIN_B17, DB8500_PIN_C16, DB8500_PIN_C19, DB8500_PIN_C17,
+	DB8500_PIN_A18, DB8500_PIN_C18, DB8500_PIN_B19, DB8500_PIN_B20,
+	DB8500_PIN_D21, DB8500_PIN_D20,	DB8500_PIN_C20, DB8500_PIN_B21,
+	DB8500_PIN_C21, DB8500_PIN_A22, DB8500_PIN_B24, DB8500_PIN_C22 };
+
+/* Other C3 column */
+static const unsigned stmmod_oc3_1_pins[] = { DB8500_PIN_AB2, DB8500_PIN_W2,
+	DB8500_PIN_W3, DB8500_PIN_V3, DB8500_PIN_V2 };
+static const unsigned stmmod_oc3_2_pins[] = { DB8500_PIN_G5, DB8500_PIN_G4,
+	DB8500_PIN_H4, DB8500_PIN_H3, DB8500_PIN_J3 };
+static const unsigned uartmodrx_oc3_1_pins[] = { DB8500_PIN_H2 };
+static const unsigned uartmodtx_oc3_1_pins[] = { DB8500_PIN_J2 };
+static const unsigned etmr4_oc3_1_pins[] = { DB8500_PIN_D17, DB8500_PIN_D16,
+	DB8500_PIN_B17, DB8500_PIN_C16, DB8500_PIN_C19, DB8500_PIN_C17,
+	DB8500_PIN_A18, DB8500_PIN_C18, DB8500_PIN_B19, DB8500_PIN_B20,
+	DB8500_PIN_D21, DB8500_PIN_D20,	DB8500_PIN_C20, DB8500_PIN_B21,
+	DB8500_PIN_C21, DB8500_PIN_A22, DB8500_PIN_B24, DB8500_PIN_C22 };
+
+/* Other C4 column */
+static const unsigned sbag_oc4_1_pins[] = { DB8500_PIN_G5, DB8500_PIN_G4,
+	DB8500_PIN_H4, DB8500_PIN_H3, DB8500_PIN_J3, DB8500_PIN_H1 };
+static const unsigned hwobs_oc4_1_pins[] = { DB8500_PIN_D17, DB8500_PIN_D16,
+	DB8500_PIN_B17, DB8500_PIN_C16, DB8500_PIN_C19, DB8500_PIN_C17,
+	DB8500_PIN_A18, DB8500_PIN_C18, DB8500_PIN_B19, DB8500_PIN_B20,
+	DB8500_PIN_D21, DB8500_PIN_D20,	DB8500_PIN_C20, DB8500_PIN_B21,
+	DB8500_PIN_C21, DB8500_PIN_A22, DB8500_PIN_B24, DB8500_PIN_C22 };
+
 #define DB8500_PIN_GROUP(a,b) { .name = #a, .pins = a##_pins,		\
 			.npins = ARRAY_SIZE(a##_pins), .altsetting = b }
 
@@ -639,6 +694,7 @@
 	DB8500_PIN_GROUP(i2c0_a_1, NMK_GPIO_ALT_A),
 	DB8500_PIN_GROUP(ipgpio0_a_1, NMK_GPIO_ALT_A),
 	DB8500_PIN_GROUP(ipgpio1_a_1, NMK_GPIO_ALT_A),
+	DB8500_PIN_GROUP(kp_a_2, NMK_GPIO_ALT_A),
 	DB8500_PIN_GROUP(msp2sck_a_1, NMK_GPIO_ALT_A),
 	DB8500_PIN_GROUP(msp2_a_1, NMK_GPIO_ALT_A),
 	DB8500_PIN_GROUP(mc4_a_1, NMK_GPIO_ALT_A),
@@ -647,8 +703,10 @@
 	DB8500_PIN_GROUP(hsir_a_1, NMK_GPIO_ALT_A),
 	DB8500_PIN_GROUP(hsit_a_1, NMK_GPIO_ALT_A),
 	DB8500_PIN_GROUP(hsit_a_2, NMK_GPIO_ALT_A),
-	DB8500_PIN_GROUP(clkout_a_1, NMK_GPIO_ALT_A),
-	DB8500_PIN_GROUP(clkout_a_2, NMK_GPIO_ALT_A),
+	DB8500_PIN_GROUP(clkout1_a_1, NMK_GPIO_ALT_A),
+	DB8500_PIN_GROUP(clkout1_a_2, NMK_GPIO_ALT_A),
+	DB8500_PIN_GROUP(clkout2_a_1, NMK_GPIO_ALT_A),
+	DB8500_PIN_GROUP(clkout2_a_2, NMK_GPIO_ALT_A),
 	DB8500_PIN_GROUP(usb_a_1, NMK_GPIO_ALT_A),
 	/* Altfunction B column */
 	DB8500_PIN_GROUP(trig_b_1, NMK_GPIO_ALT_B),
@@ -720,15 +778,41 @@
 	DB8500_PIN_GROUP(stmmod_c_1, NMK_GPIO_ALT_C),
 	DB8500_PIN_GROUP(usbsim_c_1, NMK_GPIO_ALT_C),
 	DB8500_PIN_GROUP(mc4rstn_c_1, NMK_GPIO_ALT_C),
-	DB8500_PIN_GROUP(clkout_c_1, NMK_GPIO_ALT_C),
+	DB8500_PIN_GROUP(clkout1_c_1, NMK_GPIO_ALT_C),
+	DB8500_PIN_GROUP(clkout2_c_1, NMK_GPIO_ALT_C),
 	DB8500_PIN_GROUP(i2c3_c_1, NMK_GPIO_ALT_C),
 	DB8500_PIN_GROUP(spi0_c_1, NMK_GPIO_ALT_C),
 	DB8500_PIN_GROUP(usbsim_c_2, NMK_GPIO_ALT_C),
 	DB8500_PIN_GROUP(i2c3_c_2, NMK_GPIO_ALT_C),
 	/* Other alt C1 column */
+	DB8500_PIN_GROUP(u2rx_oc1_1, NMK_GPIO_ALT_C1),
+	DB8500_PIN_GROUP(stmape_oc1_1, NMK_GPIO_ALT_C1),
+	DB8500_PIN_GROUP(remap0_oc1_1, NMK_GPIO_ALT_C1),
+	DB8500_PIN_GROUP(remap1_oc1_1, NMK_GPIO_ALT_C1),
+	DB8500_PIN_GROUP(ptma9_oc1_1, NMK_GPIO_ALT_C1),
 	DB8500_PIN_GROUP(kp_oc1_1, NMK_GPIO_ALT_C1),
+	DB8500_PIN_GROUP(rf_oc1_1, NMK_GPIO_ALT_C1),
+	DB8500_PIN_GROUP(hxclk_oc1_1, NMK_GPIO_ALT_C1),
+	DB8500_PIN_GROUP(uartmodrx_oc1_1, NMK_GPIO_ALT_C1),
+	DB8500_PIN_GROUP(uartmodtx_oc1_1, NMK_GPIO_ALT_C1),
+	DB8500_PIN_GROUP(stmmod_oc1_1, NMK_GPIO_ALT_C1),
+	DB8500_PIN_GROUP(hxgpio_oc1_1, NMK_GPIO_ALT_C1),
+	DB8500_PIN_GROUP(rf_oc1_2, NMK_GPIO_ALT_C1),
 	DB8500_PIN_GROUP(spi2_oc1_1, NMK_GPIO_ALT_C1),
 	DB8500_PIN_GROUP(spi2_oc1_2, NMK_GPIO_ALT_C1),
+	/* Other alt C2 column */
+	DB8500_PIN_GROUP(sbag_oc2_1, NMK_GPIO_ALT_C2),
+	DB8500_PIN_GROUP(etmr4_oc2_1, NMK_GPIO_ALT_C2),
+	DB8500_PIN_GROUP(ptma9_oc2_1, NMK_GPIO_ALT_C2),
+	/* Other alt C3 column */
+	DB8500_PIN_GROUP(stmmod_oc3_1, NMK_GPIO_ALT_C3),
+	DB8500_PIN_GROUP(stmmod_oc3_2, NMK_GPIO_ALT_C3),
+	DB8500_PIN_GROUP(uartmodrx_oc3_1, NMK_GPIO_ALT_C3),
+	DB8500_PIN_GROUP(uartmodtx_oc3_1, NMK_GPIO_ALT_C3),
+	DB8500_PIN_GROUP(etmr4_oc3_1, NMK_GPIO_ALT_C3),
+	/* Other alt C4 column */
+	DB8500_PIN_GROUP(sbag_oc4_1, NMK_GPIO_ALT_C4),
+	DB8500_PIN_GROUP(hwobs_oc4_1, NMK_GPIO_ALT_C4),
 };
 
 /* We use this macro to define the groups applicable to a function */
@@ -742,7 +826,7 @@
  * only available on two pins in alternative function C
  */
 DB8500_FUNC_GROUPS(u2, "u2rxtx_b_1", "u2rxtx_c_1", "u2ctsrts_c_1",
-		   "u2rxtx_c_2", "u2rxtx_c_3");
+		   "u2rxtx_c_2", "u2rxtx_c_3", "u2rx_oc1_1");
 DB8500_FUNC_GROUPS(ipi2c, "ipi2c_a_1", "ipi2c_a_2");
 /*
  * MSP0 can only be on a certain set of pins, but the TX/RX pins can be
@@ -757,7 +841,7 @@
 DB8500_FUNC_GROUPS(lcdb, "lcdb_a_1");
 DB8500_FUNC_GROUPS(lcd, "lcdvsi0_a_1", "lcdvsi1_a_1", "lcd_d0_d7_a_1",
 	"lcd_d8_d11_a_1", "lcd_d12_d23_a_1", "lcd_b_1");
-DB8500_FUNC_GROUPS(kp, "kp_a_1", "kp_b_1", "kp_b_2", "kp_c_1", "kp_oc1_1");
+DB8500_FUNC_GROUPS(kp, "kp_a_1", "kp_a_2", "kp_b_1", "kp_b_2", "kp_c_1", "kp_oc1_1");
 DB8500_FUNC_GROUPS(mc2, "mc2_a_1", "mc2rstn_c_1");
 DB8500_FUNC_GROUPS(ssp1, "ssp1_a_1");
 DB8500_FUNC_GROUPS(ssp0, "ssp0_a_1");
@@ -773,7 +857,8 @@
 DB8500_FUNC_GROUPS(mc4, "mc4_a_1", "mc4rstn_c_1");
 DB8500_FUNC_GROUPS(mc1, "mc1_a_1", "mc1_a_2", "mc1dir_a_1");
 DB8500_FUNC_GROUPS(hsi, "hsir_a_1", "hsit_a_1", "hsit_a_2");
-DB8500_FUNC_GROUPS(clkout, "clkout_a_1", "clkout_a_2", "clkout_c_1");
+DB8500_FUNC_GROUPS(clkout, "clkout1_a_1", "clkout1_a_2", "clkout1_c_1",
+		"clkout2_a_1", "clkout2_a_2", "clkout2_c_1");
 DB8500_FUNC_GROUPS(usb, "usb_a_1");
 DB8500_FUNC_GROUPS(trig, "trig_b_1");
 DB8500_FUNC_GROUPS(i2c4, "i2c4_b_1");
@@ -784,8 +869,10 @@
  * so select one of each.
  */
 DB8500_FUNC_GROUPS(uartmod, "uartmodtx_b_1", "uartmodrx_b_1", "uartmodrx_b_2",
-		   "uartmodrx_c_1", "uartmod_tx_c_1");
-DB8500_FUNC_GROUPS(stmmod, "stmmod_b_1", "stmmod_c_1");
+		"uartmodrx_c_1", "uartmod_tx_c_1", "uartmodrx_oc1_1",
+		"uartmodtx_oc1_1", "uartmodrx_oc3_1", "uartmodtx_oc3_1");
+DB8500_FUNC_GROUPS(stmmod, "stmmod_b_1", "stmmod_c_1", "stmmod_oc1_1",
+		"stmmod_oc3_1", "stmmod_oc3_2");
 DB8500_FUNC_GROUPS(spi3, "spi3_b_1");
 /* Select between CS0 on alt B or PS1 on alt C */
 DB8500_FUNC_GROUPS(sm, "sm_b_1", "smcs0_b_1", "smcs1_b_1", "smcleale_c_1",
@@ -799,13 +886,19 @@
 DB8500_FUNC_GROUPS(slim0, "slim0_c_1");
 DB8500_FUNC_GROUPS(ms, "ms_c_1");
 DB8500_FUNC_GROUPS(iptrigout, "iptrigout_c_1");
-DB8500_FUNC_GROUPS(stmape, "stmape_c_1", "stmape_c_2");
+DB8500_FUNC_GROUPS(stmape, "stmape_c_1", "stmape_c_2", "stmape_oc1_1");
 DB8500_FUNC_GROUPS(mc5, "mc5_c_1");
 DB8500_FUNC_GROUPS(usbsim, "usbsim_c_1", "usbsim_c_2");
 DB8500_FUNC_GROUPS(i2c3, "i2c3_c_1", "i2c3_c_2");
 DB8500_FUNC_GROUPS(spi0, "spi0_c_1");
 DB8500_FUNC_GROUPS(spi2, "spi2_oc1_1", "spi2_oc1_2");
-
+DB8500_FUNC_GROUPS(remap, "remap0_oc1_1", "remap1_oc1_1");
+DB8500_FUNC_GROUPS(sbag, "sbag_oc2_1", "sbag_oc4_1");
+DB8500_FUNC_GROUPS(ptm, "ptma9_oc1_1", "ptma9_oc2_1");
+DB8500_FUNC_GROUPS(rf, "rf_oc1_1", "rf_oc1_2");
+DB8500_FUNC_GROUPS(hx, "hxclk_oc1_1", "hxgpio_oc1_1");
+DB8500_FUNC_GROUPS(etm, "etmr4_oc2_1", "etmr4_oc3_1");
+DB8500_FUNC_GROUPS(hwobs, "hwobs_oc4_1");
 #define FUNCTION(fname)					\
 	{						\
 		.name = #fname,				\
@@ -858,6 +951,12 @@
 	FUNCTION(i2c3),
 	FUNCTION(spi0),
 	FUNCTION(spi2),
+	FUNCTION(remap),
+	FUNCTION(ptm),
+	FUNCTION(rf),
+	FUNCTION(hx),
+	FUNCTION(etm),
+	FUNCTION(hwobs),
 };
 
 static const struct prcm_gpiocr_altcx_pin_desc db8500_altcx_pins[] = {
diff --git a/drivers/pinctrl/pinctrl-nomadik-db8540.c b/drivers/pinctrl/pinctrl-nomadik-db8540.c
index 52fc301..bb6a4016 100644
--- a/drivers/pinctrl/pinctrl-nomadik-db8540.c
+++ b/drivers/pinctrl/pinctrl-nomadik-db8540.c
@@ -460,8 +460,10 @@
 	DB8540_PIN_E10, DB8540_PIN_B12, DB8540_PIN_D10 };
 static const unsigned hsit_a_2_pins[] = { DB8540_PIN_B11, DB8540_PIN_B10,
 	DB8540_PIN_E10, DB8540_PIN_B12 };
-static const unsigned clkout_a_1_pins[] = { DB8540_PIN_D11, DB8540_PIN_AJ6 };
-static const unsigned clkout_a_2_pins[] = { DB8540_PIN_B13, DB8540_PIN_C12 };
+static const unsigned clkout1_a_1_pins[] = { DB8540_PIN_D11 };
+static const unsigned clkout1_a_2_pins[] = { DB8540_PIN_B13 };
+static const unsigned clkout2_a_1_pins[] = { DB8540_PIN_AJ6 };
+static const unsigned clkout2_a_2_pins[] = { DB8540_PIN_C12 };
 static const unsigned msp4_a_1_pins[] = { DB8540_PIN_B14, DB8540_PIN_E11 };
 static const unsigned usb_a_1_pins[] = { DB8540_PIN_D12, DB8540_PIN_D15,
 	DB8540_PIN_C13, DB8540_PIN_C14, DB8540_PIN_C18, DB8540_PIN_C16,
@@ -698,8 +700,10 @@
 	DB8540_PIN_GROUP(hsir_a_1, NMK_GPIO_ALT_A),
 	DB8540_PIN_GROUP(hsit_a_1, NMK_GPIO_ALT_A),
 	DB8540_PIN_GROUP(hsit_a_2, NMK_GPIO_ALT_A),
-	DB8540_PIN_GROUP(clkout_a_1, NMK_GPIO_ALT_A),
-	DB8540_PIN_GROUP(clkout_a_2, NMK_GPIO_ALT_A),
+	DB8540_PIN_GROUP(clkout1_a_1, NMK_GPIO_ALT_A),
+	DB8540_PIN_GROUP(clkout1_a_2, NMK_GPIO_ALT_A),
+	DB8540_PIN_GROUP(clkout2_a_1, NMK_GPIO_ALT_A),
+	DB8540_PIN_GROUP(clkout2_a_2, NMK_GPIO_ALT_A),
 	DB8540_PIN_GROUP(msp4_a_1, NMK_GPIO_ALT_A),
 	DB8540_PIN_GROUP(usb_a_1, NMK_GPIO_ALT_A),
 	/* Altfunction B column */
@@ -822,6 +826,7 @@
 	DB8540_PIN_GROUP(modaccuarttxrx_oc4_1, NMK_GPIO_ALT_C4),
 	DB8540_PIN_GROUP(modaccuartrtscts_oc4_1, NMK_GPIO_ALT_C4),
 	DB8540_PIN_GROUP(stmmod_oc4_1, NMK_GPIO_ALT_C4),
+	DB8540_PIN_GROUP(moduartstmmux_oc4_1, NMK_GPIO_ALT_C4),
 
 };
 
@@ -830,7 +835,8 @@
 static const char * const a##_groups[] = { b };
 
 DB8540_FUNC_GROUPS(apetrig, "apetrig_b_1");
-DB8540_FUNC_GROUPS(clkout, "clkoutreq_a_1", "clkout_a_1", "clkout_a_2");
+DB8540_FUNC_GROUPS(clkout, "clkoutreq_a_1", "clkout1_a_1", "clkout1_a_2",
+		"clkout2_a_1", "clkout2_a_2");
 DB8540_FUNC_GROUPS(ddrtrig, "ddrtrig_b_1");
 DB8540_FUNC_GROUPS(hsi, "hsir_a_1", "hsit_a_1", "hsit_a_2");
 DB8540_FUNC_GROUPS(hwobs, "hwobs_oc4_1");
diff --git a/drivers/pinctrl/pinctrl-nomadik.c b/drivers/pinctrl/pinctrl-nomadik.c
index cf82d9c..8ef3e85 100644
--- a/drivers/pinctrl/pinctrl-nomadik.c
+++ b/drivers/pinctrl/pinctrl-nomadik.c
@@ -30,26 +30,10 @@
 #include <linux/pinctrl/pinconf.h>
 /* Since we request GPIOs from ourself */
 #include <linux/pinctrl/consumer.h>
-/*
- * For the U8500 archs, use the PRCMU register interface, for the older
- * Nomadik, provide some stubs. The functions using these will only be
- * called on the U8500 series.
- */
-#ifdef CONFIG_ARCH_U8500
-#include <linux/mfd/dbx500-prcmu.h>
-#else
-static inline u32 prcmu_read(unsigned int reg) {
-	return 0;
-}
-static inline void prcmu_write(unsigned int reg, u32 value) {}
-static inline void prcmu_write_masked(unsigned int reg, u32 mask, u32 value) {}
-#endif
+#include <linux/platform_data/pinctrl-nomadik.h>
 
 #include <asm/mach/irq.h>
 
-#include <plat/pincfg.h>
-#include <plat/gpio-nomadik.h>
-
 #include "pinctrl-nomadik.h"
 
 /*
@@ -60,8 +44,6 @@
  * Symbols in this file are called "nmk_gpio" for "nomadik gpio"
  */
 
-#define NMK_GPIO_PER_CHIP	32
-
 struct nmk_gpio_chip {
 	struct gpio_chip chip;
 	struct irq_domain *domain;
@@ -86,10 +68,18 @@
 	u32 lowemi;
 };
 
+/**
+ * struct nmk_pinctrl - state container for the Nomadik pin controller
+ * @dev: containing device pointer
+ * @pctl: corresponding pin controller device
+ * @soc: SoC data for this specific chip
+ * @prcm_base: PRCM register range virtual base
+ */
 struct nmk_pinctrl {
 	struct device *dev;
 	struct pinctrl_dev *pctl;
 	const struct nmk_pinctrl_soc_data *soc;
+	void __iomem *prcm_base;
 };
 
 static struct nmk_gpio_chip *
@@ -251,6 +241,15 @@
 	dev_dbg(nmk_chip->chip.dev, "%d: clearing interrupt mask\n", gpio);
 }
 
+static void nmk_write_masked(void __iomem *reg, u32 mask, u32 value)
+{
+	u32 val;
+
+	val = readl(reg);
+	val = ((val & ~mask) | (value & mask));
+	writel(val, reg);
+}
+
 static void nmk_prcm_altcx_set_mode(struct nmk_pinctrl *npct,
 	unsigned offset, unsigned alt_num)
 {
@@ -289,8 +288,8 @@
 			if (pin_desc->altcx[i].used == true) {
 				reg = gpiocr_regs[pin_desc->altcx[i].reg_index];
 				bit = pin_desc->altcx[i].control_bit;
-				if (prcmu_read(reg) & BIT(bit)) {
-					prcmu_write_masked(reg, BIT(bit), 0);
+				if (readl(npct->prcm_base + reg) & BIT(bit)) {
+					nmk_write_masked(npct->prcm_base + reg, BIT(bit), 0);
 					dev_dbg(npct->dev,
 						"PRCM GPIOCR: pin %i: alternate-C%i has been disabled\n",
 						offset, i+1);
@@ -318,8 +317,8 @@
 		if (pin_desc->altcx[i].used == true) {
 			reg = gpiocr_regs[pin_desc->altcx[i].reg_index];
 			bit = pin_desc->altcx[i].control_bit;
-			if (prcmu_read(reg) & BIT(bit)) {
-				prcmu_write_masked(reg, BIT(bit), 0);
+			if (readl(npct->prcm_base + reg) & BIT(bit)) {
+				nmk_write_masked(npct->prcm_base + reg, BIT(bit), 0);
 				dev_dbg(npct->dev,
 					"PRCM GPIOCR: pin %i: alternate-C%i has been disabled\n",
 					offset, i+1);
@@ -331,7 +330,7 @@
 	bit = pin_desc->altcx[alt_index].control_bit;
 	dev_dbg(npct->dev, "PRCM GPIOCR: pin %i: alternate-C%i has been selected\n",
 		offset, alt_index+1);
-	prcmu_write_masked(reg, BIT(bit), BIT(bit));
+	nmk_write_masked(npct->prcm_base + reg, BIT(bit), BIT(bit));
 }
 
 static void __nmk_config_pin(struct nmk_gpio_chip *nmk_chip, unsigned offset,
@@ -536,7 +535,7 @@
  * and its sleep mode based on the specified configuration.  The @cfg is
  * usually one of the SoC specific macros defined in mach/<soc>-pins.h.  These
  * are constructed using, and can be further enhanced with, the macros in
- * plat/pincfg.h.
+ * <linux/platform_data/pinctrl-nomadik.h>
  *
  * If a pin's mode is set to GPIO, it is configured as an input to avoid
  * side-effects.  The gpio can be manipulated later using standard GPIO API
@@ -675,6 +674,35 @@
 }
 EXPORT_SYMBOL(nmk_gpio_set_mode);
 
+static int nmk_prcm_gpiocr_get_mode(struct pinctrl_dev *pctldev, int gpio)
+{
+	int i;
+	u16 reg;
+	u8 bit;
+	struct nmk_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev);
+	const struct prcm_gpiocr_altcx_pin_desc *pin_desc;
+	const u16 *gpiocr_regs;
+
+	for (i = 0; i < npct->soc->npins_altcx; i++) {
+		if (npct->soc->altcx_pins[i].pin == gpio)
+			break;
+	}
+	if (i == npct->soc->npins_altcx)
+		return NMK_GPIO_ALT_C;
+
+	pin_desc = npct->soc->altcx_pins + i;
+	gpiocr_regs = npct->soc->prcm_gpiocr_registers;
+	for (i = 0; i < PRCM_IDX_GPIOCR_ALTC_MAX; i++) {
+		if (pin_desc->altcx[i].used == true) {
+			reg = gpiocr_regs[pin_desc->altcx[i].reg_index];
+			bit = pin_desc->altcx[i].control_bit;
+			if (readl(npct->prcm_base + reg) & BIT(bit))
+				return NMK_GPIO_ALT_C+i+1;
+		}
+	}
+	return NMK_GPIO_ALT_C;
+}
+
 int nmk_gpio_get_mode(int gpio)
 {
 	struct nmk_gpio_chip *nmk_chip;
@@ -1063,8 +1091,9 @@
 
 #include <linux/seq_file.h>
 
-static void nmk_gpio_dbg_show_one(struct seq_file *s, struct gpio_chip *chip,
-				  unsigned offset, unsigned gpio)
+static void nmk_gpio_dbg_show_one(struct seq_file *s,
+	struct pinctrl_dev *pctldev, struct gpio_chip *chip,
+	unsigned offset, unsigned gpio)
 {
 	const char *label = gpiochip_is_requested(chip, offset);
 	struct nmk_gpio_chip *nmk_chip =
@@ -1078,12 +1107,18 @@
 		[NMK_GPIO_ALT_A]	= "altA",
 		[NMK_GPIO_ALT_B]	= "altB",
 		[NMK_GPIO_ALT_C]	= "altC",
+		[NMK_GPIO_ALT_C+1]	= "altC1",
+		[NMK_GPIO_ALT_C+2]	= "altC2",
+		[NMK_GPIO_ALT_C+3]	= "altC3",
+		[NMK_GPIO_ALT_C+4]	= "altC4",
 	};
 
 	clk_enable(nmk_chip->clk);
 	is_out = !!(readl(nmk_chip->addr + NMK_GPIO_DIR) & bit);
 	pull = !(readl(nmk_chip->addr + NMK_GPIO_PDIS) & bit);
 	mode = nmk_gpio_get_mode(gpio);
+	if ((mode == NMK_GPIO_ALT_C) && pctldev)
+		mode = nmk_prcm_gpiocr_get_mode(pctldev, gpio);
 
 	seq_printf(s, " gpio-%-3d (%-20.20s) %s %s %s %s",
 		   gpio, label ?: "(none)",
@@ -1127,13 +1162,14 @@
 	unsigned		gpio = chip->base;
 
 	for (i = 0; i < chip->ngpio; i++, gpio++) {
-		nmk_gpio_dbg_show_one(s, chip, i, gpio);
+		nmk_gpio_dbg_show_one(s, NULL, chip, i, gpio);
 		seq_printf(s, "\n");
 	}
 }
 
 #else
 static inline void nmk_gpio_dbg_show_one(struct seq_file *s,
+					 struct pinctrl_dev *pctldev,
 					 struct gpio_chip *chip,
 					 unsigned offset, unsigned gpio)
 {
@@ -1250,8 +1286,8 @@
 	}
 }
 
-int nmk_gpio_irq_map(struct irq_domain *d, unsigned int irq,
-			  irq_hw_number_t hwirq)
+static int nmk_gpio_irq_map(struct irq_domain *d, unsigned int irq,
+			    irq_hw_number_t hwirq)
 {
 	struct nmk_gpio_chip *nmk_chip = d->host_data;
 
@@ -1464,7 +1500,7 @@
 		return;
 	}
 	chip = range->gc;
-	nmk_gpio_dbg_show_one(s, chip, offset - chip->base, offset);
+	nmk_gpio_dbg_show_one(s, pctldev, chip, offset - chip->base, offset);
 }
 
 static struct pinctrl_ops nmk_pinctrl_ops = {
@@ -1635,9 +1671,9 @@
 	dev_dbg(npct->dev, "disable group %s, %u pins\n", g->name, g->npins);
 }
 
-int nmk_gpio_request_enable(struct pinctrl_dev *pctldev,
-			    struct pinctrl_gpio_range *range,
-			    unsigned offset)
+static int nmk_gpio_request_enable(struct pinctrl_dev *pctldev,
+				   struct pinctrl_gpio_range *range,
+				   unsigned offset)
 {
 	struct nmk_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev);
 	struct nmk_gpio_chip *nmk_chip;
@@ -1666,9 +1702,9 @@
 	return 0;
 }
 
-void nmk_gpio_disable_free(struct pinctrl_dev *pctldev,
-			   struct pinctrl_gpio_range *range,
-			   unsigned offset)
+static void nmk_gpio_disable_free(struct pinctrl_dev *pctldev,
+				  struct pinctrl_gpio_range *range,
+				  unsigned offset)
 {
 	struct nmk_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev);
 
@@ -1686,17 +1722,15 @@
 	.gpio_disable_free = nmk_gpio_disable_free,
 };
 
-int nmk_pin_config_get(struct pinctrl_dev *pctldev,
-		       unsigned pin,
-		       unsigned long *config)
+static int nmk_pin_config_get(struct pinctrl_dev *pctldev, unsigned pin,
+			      unsigned long *config)
 {
 	/* Not implemented */
 	return -EINVAL;
 }
 
-int nmk_pin_config_set(struct pinctrl_dev *pctldev,
-		       unsigned pin,
-		       unsigned long config)
+static int nmk_pin_config_set(struct pinctrl_dev *pctldev, unsigned pin,
+			      unsigned long config)
 {
 	static const char *pullnames[] = {
 		[NMK_GPIO_PULL_NONE]	= "none",
@@ -1818,6 +1852,7 @@
 	const struct platform_device_id *platid = platform_get_device_id(pdev);
 	struct device_node *np = pdev->dev.of_node;
 	struct nmk_pinctrl *npct;
+	struct resource *res;
 	unsigned int version = 0;
 	int i;
 
@@ -1827,9 +1862,14 @@
 
 	if (platid)
 		version = platid->driver_data;
-	else if (np)
-		version = (unsigned int)
-			of_match_device(nmk_pinctrl_match, &pdev->dev)->data;
+	else if (np) {
+		const struct of_device_id *match;
+
+		match = of_match_device(nmk_pinctrl_match, &pdev->dev);
+		if (!match)
+			return -ENODEV;
+		version = (unsigned int) match->data;
+	}
 
 	/* Poke in other ASIC variants here */
 	if (version == PINCTRL_NMK_STN8815)
@@ -1839,22 +1879,37 @@
 	if (version == PINCTRL_NMK_DB8540)
 		nmk_pinctrl_db8540_init(&npct->soc);
 
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res) {
+		npct->prcm_base = devm_ioremap(&pdev->dev, res->start,
+					       resource_size(res));
+		if (!npct->prcm_base) {
+			dev_err(&pdev->dev,
+				"failed to ioremap PRCM registers\n");
+			return -ENOMEM;
+		}
+	} else {
+		dev_info(&pdev->dev,
+			 "No PRCM base, assume no ALT-Cx control is available\n");
+	}
+
 	/*
 	 * We need all the GPIO drivers to probe FIRST, or we will not be able
 	 * to obtain references to the struct gpio_chip * for them, and we
 	 * need this to proceed.
 	 */
 	for (i = 0; i < npct->soc->gpio_num_ranges; i++) {
-		if (!nmk_gpio_chips[i]) {
+		if (!nmk_gpio_chips[npct->soc->gpio_ranges[i].id]) {
 			dev_warn(&pdev->dev, "GPIO chip %d not registered yet\n", i);
 			return -EPROBE_DEFER;
 		}
-		npct->soc->gpio_ranges[i].gc = &nmk_gpio_chips[i]->chip;
+		npct->soc->gpio_ranges[i].gc = &nmk_gpio_chips[npct->soc->gpio_ranges[i].id]->chip;
 	}
 
 	nmk_pinctrl_desc.pins = npct->soc->pins;
 	nmk_pinctrl_desc.npins = npct->soc->npins;
 	npct->dev = &pdev->dev;
+
 	npct->pctl = pinctrl_register(&nmk_pinctrl_desc, &pdev->dev, npct);
 	if (!npct->pctl) {
 		dev_err(&pdev->dev, "could not register Nomadik pinctrl driver\n");
@@ -1889,6 +1944,7 @@
 	{ "pinctrl-stn8815", PINCTRL_NMK_STN8815 },
 	{ "pinctrl-db8500", PINCTRL_NMK_DB8500 },
 	{ "pinctrl-db8540", PINCTRL_NMK_DB8540 },
+	{ }
 };
 
 static struct platform_driver nmk_pinctrl_driver = {
diff --git a/drivers/pinctrl/pinctrl-nomadik.h b/drivers/pinctrl/pinctrl-nomadik.h
index eef316e..bcd4191 100644
--- a/drivers/pinctrl/pinctrl-nomadik.h
+++ b/drivers/pinctrl/pinctrl-nomadik.h
@@ -1,7 +1,7 @@
 #ifndef PINCTRL_PINCTRL_NOMADIK_H
 #define PINCTRL_PINCTRL_NOMADIK_H
 
-#include <plat/gpio-nomadik.h>
+#include <linux/platform_data/pinctrl-nomadik.h>
 
 /* Package definitions */
 #define PINCTRL_NMK_STN8815	0
diff --git a/drivers/pinctrl/pinctrl-pxa3xx.c b/drivers/pinctrl/pinctrl-pxa3xx.c
index f14cd6b..51f8a38 100644
--- a/drivers/pinctrl/pinctrl-pxa3xx.c
+++ b/drivers/pinctrl/pinctrl-pxa3xx.c
@@ -173,7 +173,6 @@
 {
 	struct pinctrl_desc *desc;
 	struct resource *res;
-	int ret = 0;
 
 	if (!info || !info->cputype)
 		return -EINVAL;
@@ -188,23 +187,17 @@
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res)
 		return -ENOENT;
-	info->phy_base = res->start;
-	info->phy_size = resource_size(res);
-	info->virt_base = ioremap(info->phy_base, info->phy_size);
+	info->virt_base = devm_request_and_ioremap(&pdev->dev, res);
 	if (!info->virt_base)
 		return -ENOMEM;
 	info->pctrl = pinctrl_register(desc, &pdev->dev, info);
 	if (!info->pctrl) {
 		dev_err(&pdev->dev, "failed to register PXA pinmux driver\n");
-		ret = -EINVAL;
-		goto err;
+		return -EINVAL;
 	}
 	pinctrl_add_gpio_range(info->pctrl, &pxa3xx_pinctrl_gpio_range);
 	platform_set_drvdata(pdev, info);
 	return 0;
-err:
-	iounmap(info->virt_base);
-	return ret;
 }
 
 int pxa3xx_pinctrl_unregister(struct platform_device *pdev)
@@ -212,7 +205,6 @@
 	struct pxa3xx_pinmux_info *info = platform_get_drvdata(pdev);
 
 	pinctrl_unregister(info->pctrl);
-	iounmap(info->virt_base);
 	platform_set_drvdata(pdev, NULL);
 	return 0;
 }
diff --git a/drivers/pinctrl/pinctrl-pxa3xx.h b/drivers/pinctrl/pinctrl-pxa3xx.h
index 8135744..92fad08 100644
--- a/drivers/pinctrl/pinctrl-pxa3xx.h
+++ b/drivers/pinctrl/pinctrl-pxa3xx.h
@@ -60,8 +60,6 @@
 	struct device *dev;
 	struct pinctrl_dev *pctrl;
 	enum pxa_cpu_type cputype;
-	unsigned int phy_base;
-	unsigned int phy_size;
 	void __iomem *virt_base;
 
 	struct pxa3xx_mfp_pin *mfp;
diff --git a/drivers/pinctrl/pinctrl-single.c b/drivers/pinctrl/pinctrl-single.c
index 9f70b30..7964283 100644
--- a/drivers/pinctrl/pinctrl-single.c
+++ b/drivers/pinctrl/pinctrl-single.c
@@ -30,6 +30,7 @@
 #define PCS_MUX_BITS_NAME		"pinctrl-single,bits"
 #define PCS_REG_NAME_LEN		((sizeof(unsigned long) * 2) + 1)
 #define PCS_OFF_DISABLED		~0U
+#define PCS_MAX_GPIO_VALUES		2
 
 /**
  * struct pcs_pingroup - pingroups for a function
@@ -77,6 +78,16 @@
 };
 
 /**
+ * struct pcs_gpio_range - pinctrl gpio range
+ * @range:	subrange of the GPIO number space
+ * @gpio_func:	gpio function value in the pinmux register
+ */
+struct pcs_gpio_range {
+	struct pinctrl_gpio_range range;
+	int gpio_func;
+};
+
+/**
  * struct pcs_data - wrapper for data needed by pinctrl framework
  * @pa:		pindesc array
  * @cur:	index to current element
@@ -244,15 +255,15 @@
 
 static void pcs_pin_dbg_show(struct pinctrl_dev *pctldev,
 					struct seq_file *s,
-					unsigned offset)
+					unsigned pin)
 {
 	struct pcs_device *pcs;
-	unsigned val;
+	unsigned val, mux_bytes;
 
 	pcs = pinctrl_dev_get_drvdata(pctldev);
 
-	val = pcs->read(pcs->base + offset);
-	val &= pcs->fmask;
+	mux_bytes = pcs->width / BITS_PER_BYTE;
+	val = pcs->read(pcs->base + pin * mux_bytes);
 
 	seq_printf(s, "%08x %s " , val, DRIVER_NAME);
 }
@@ -403,9 +414,26 @@
 }
 
 static int pcs_request_gpio(struct pinctrl_dev *pctldev,
-			struct pinctrl_gpio_range *range, unsigned offset)
+			    struct pinctrl_gpio_range *range, unsigned pin)
 {
-	return -ENOTSUPP;
+	struct pcs_device *pcs = pinctrl_dev_get_drvdata(pctldev);
+	struct pcs_gpio_range *gpio = NULL;
+	int end, mux_bytes;
+	unsigned data;
+
+	gpio = container_of(range, struct pcs_gpio_range, range);
+	end = range->pin_base + range->npins - 1;
+	if (pin < range->pin_base || pin > end) {
+		dev_err(pctldev->dev,
+			"pin %d isn't in the range of %d to %d\n",
+			pin, range->pin_base, end);
+		return -EINVAL;
+	}
+	mux_bytes = pcs->width / BITS_PER_BYTE;
+	data = pcs->read(pcs->base + pin * mux_bytes) & ~pcs->fmask;
+	data |= gpio->gpio_func;
+	pcs->write(data, pcs->base + pin * mux_bytes);
+	return 0;
 }
 
 static struct pinmux_ops pcs_pinmux_ops = {
@@ -772,7 +800,7 @@
 	pcs = pinctrl_dev_get_drvdata(pctldev);
 
 	*map = devm_kzalloc(pcs->dev, sizeof(**map), GFP_KERNEL);
-	if (!map)
+	if (!*map)
 		return -ENOMEM;
 
 	*num_maps = 0;
@@ -879,6 +907,50 @@
 
 static struct of_device_id pcs_of_match[];
 
+static int __devinit pcs_add_gpio_range(struct device_node *node,
+					struct pcs_device *pcs)
+{
+	struct pcs_gpio_range *gpio;
+	struct device_node *child;
+	struct resource r;
+	const char name[] = "pinctrl-single";
+	u32 gpiores[PCS_MAX_GPIO_VALUES];
+	int ret, i = 0, mux_bytes = 0;
+
+	for_each_child_of_node(node, child) {
+		ret = of_address_to_resource(child, 0, &r);
+		if (ret < 0)
+			continue;
+		memset(gpiores, 0, sizeof(u32) * PCS_MAX_GPIO_VALUES);
+		ret = of_property_read_u32_array(child, "pinctrl-single,gpio",
+						 gpiores, PCS_MAX_GPIO_VALUES);
+		if (ret < 0)
+			continue;
+		gpio = devm_kzalloc(pcs->dev, sizeof(*gpio), GFP_KERNEL);
+		if (!gpio) {
+			dev_err(pcs->dev, "failed to allocate pcs gpio\n");
+			return -ENOMEM;
+		}
+		gpio->range.name = devm_kzalloc(pcs->dev, sizeof(name),
+						GFP_KERNEL);
+		if (!gpio->range.name) {
+			dev_err(pcs->dev, "failed to allocate range name\n");
+			return -ENOMEM;
+		}
+		memcpy((char *)gpio->range.name, name, sizeof(name));
+
+		gpio->range.id = i++;
+		gpio->range.base = gpiores[0];
+		gpio->gpio_func = gpiores[1];
+		mux_bytes = pcs->width / BITS_PER_BYTE;
+		gpio->range.pin_base = (r.start - pcs->res->start) / mux_bytes;
+		gpio->range.npins = (r.end - r.start) / mux_bytes + 1;
+
+		pinctrl_add_gpio_range(pcs->pctl, &gpio->range);
+	}
+	return 0;
+}
+
 static int __devinit pcs_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
@@ -975,6 +1047,10 @@
 		goto free;
 	}
 
+	ret = pcs_add_gpio_range(np, pcs);
+	if (ret < 0)
+		goto free;
+
 	dev_info(pcs->dev, "%i pins at pa %p size %u\n",
 		 pcs->desc.npins, pcs->base, pcs->size);
 
diff --git a/drivers/pinctrl/pinctrl-sirf.c b/drivers/pinctrl/pinctrl-sirf.c
index 28922c3..a4f0c5e4 100644
--- a/drivers/pinctrl/pinctrl-sirf.c
+++ b/drivers/pinctrl/pinctrl-sirf.c
@@ -32,10 +32,10 @@
 #define SIRFSOC_NUM_PADS    622
 #define SIRFSOC_RSC_PIN_MUX 0x4
 
-#define SIRFSOC_GPIO_PAD_EN(g) ((g)*0x100 + 0x84)
+#define SIRFSOC_GPIO_PAD_EN(g)		((g)*0x100 + 0x84)
+#define SIRFSOC_GPIO_PAD_EN_CLR(g)	((g)*0x100 + 0x90)
 #define SIRFSOC_GPIO_CTRL(g, i)			((g)*0x100 + (i)*4)
 #define SIRFSOC_GPIO_DSP_EN0			(0x80)
-#define SIRFSOC_GPIO_PAD_EN(g)			((g)*0x100 + 0x84)
 #define SIRFSOC_GPIO_INT_STATUS(g)		((g)*0x100 + 0x8C)
 
 #define SIRFSOC_GPIO_CTL_INTR_LOW_MASK		0x1
@@ -60,6 +60,7 @@
 	int id;
 	int parent_irq;
 	spinlock_t lock;
+	bool is_marco; /* for marco, some registers are different with prima2 */
 };
 
 static struct sirfsoc_gpio_bank sgpio_bank[SIRFSOC_GPIO_NO_OF_BANKS];
@@ -191,6 +192,7 @@
 	struct pinctrl_dev *pmx;
 	void __iomem *gpio_virtbase;
 	void __iomem *rsc_virtbase;
+	bool is_marco;
 };
 
 /* SIRFSOC_GPIO_PAD_EN set */
@@ -1088,12 +1090,21 @@
 
 	for (i = 0; i < mux->muxmask_counts; i++) {
 		u32 muxval;
-		muxval = readl(spmx->gpio_virtbase + SIRFSOC_GPIO_PAD_EN(mask[i].group));
-		if (enable)
-			muxval = muxval & ~mask[i].mask;
-		else
-			muxval = muxval | mask[i].mask;
-		writel(muxval, spmx->gpio_virtbase + SIRFSOC_GPIO_PAD_EN(mask[i].group));
+		if (!spmx->is_marco) {
+			muxval = readl(spmx->gpio_virtbase + SIRFSOC_GPIO_PAD_EN(mask[i].group));
+			if (enable)
+				muxval = muxval & ~mask[i].mask;
+			else
+				muxval = muxval | mask[i].mask;
+			writel(muxval, spmx->gpio_virtbase + SIRFSOC_GPIO_PAD_EN(mask[i].group));
+		} else {
+			if (enable)
+				writel(mask[i].mask, spmx->gpio_virtbase +
+					SIRFSOC_GPIO_PAD_EN_CLR(mask[i].group));
+			else
+				writel(mask[i].mask, spmx->gpio_virtbase +
+					SIRFSOC_GPIO_PAD_EN(mask[i].group));
+		}
 	}
 
 	if (mux->funcmask && enable) {
@@ -1158,9 +1169,14 @@
 
 	spmx = pinctrl_dev_get_drvdata(pmxdev);
 
-	muxval = readl(spmx->gpio_virtbase + SIRFSOC_GPIO_PAD_EN(group));
-	muxval = muxval | (1 << (offset - range->pin_base));
-	writel(muxval, spmx->gpio_virtbase + SIRFSOC_GPIO_PAD_EN(group));
+	if (!spmx->is_marco) {
+		muxval = readl(spmx->gpio_virtbase + SIRFSOC_GPIO_PAD_EN(group));
+		muxval = muxval | (1 << (offset - range->pin_base));
+		writel(muxval, spmx->gpio_virtbase + SIRFSOC_GPIO_PAD_EN(group));
+	} else {
+		writel(1 << (offset - range->pin_base), spmx->gpio_virtbase +
+			SIRFSOC_GPIO_PAD_EN(group));
+	}
 
 	return 0;
 }
@@ -1218,6 +1234,7 @@
 {
 	const struct of_device_id rsc_ids[]  = {
 		{ .compatible = "sirf,prima2-rsc" },
+		{ .compatible = "sirf,marco-rsc" },
 		{}
 	};
 	struct device_node *np;
@@ -1259,6 +1276,9 @@
 		goto out_no_rsc_remap;
 	}
 
+	if (of_device_is_compatible(np, "sirf,marco-pinctrl"))
+		spmx->is_marco = 1;
+
 	/* Now register the pin controller and all pins it handles */
 	spmx->pmx = pinctrl_register(&sirfsoc_pinmux_desc, &pdev->dev, spmx);
 	if (!spmx->pmx) {
@@ -1287,6 +1307,7 @@
 
 static const struct of_device_id pinmux_ids[] = {
 	{ .compatible = "sirf,prima2-pinctrl" },
+	{ .compatible = "sirf,marco-pinctrl" },
 	{}
 };
 
@@ -1621,8 +1642,8 @@
 	spin_unlock_irqrestore(&bank->lock, flags);
 }
 
-int sirfsoc_gpio_irq_map(struct irq_domain *d, unsigned int irq,
-	irq_hw_number_t hwirq)
+static int sirfsoc_gpio_irq_map(struct irq_domain *d, unsigned int irq,
+				irq_hw_number_t hwirq)
 {
 	struct sirfsoc_gpio_bank *bank = d->host_data;
 
@@ -1648,6 +1669,7 @@
 	struct sirfsoc_gpio_bank *bank;
 	void *regs;
 	struct platform_device *pdev;
+	bool is_marco = false;
 
 	pdev = of_find_device_by_node(np);
 	if (!pdev)
@@ -1657,6 +1679,9 @@
 	if (!regs)
 		return -ENOMEM;
 
+	if (of_device_is_compatible(np, "sirf,marco-pinctrl"))
+		is_marco = 1;
+
 	for (i = 0; i < SIRFSOC_GPIO_NO_OF_BANKS; i++) {
 		bank = &sgpio_bank[i];
 		spin_lock_init(&bank->lock);
@@ -1673,6 +1698,7 @@
 		bank->chip.gc.of_node = np;
 		bank->chip.regs = regs;
 		bank->id = i;
+		bank->is_marco = is_marco;
 		bank->parent_irq = platform_get_irq(pdev, i);
 		if (bank->parent_irq < 0) {
 			err = bank->parent_irq;
diff --git a/drivers/pinctrl/pinctrl-tegra.c b/drivers/pinctrl/pinctrl-tegra.c
index cb24449..e356b03 100644
--- a/drivers/pinctrl/pinctrl-tegra.c
+++ b/drivers/pinctrl/pinctrl-tegra.c
@@ -178,8 +178,9 @@
 	return 0;
 }
 
-void tegra_pinctrl_dt_free_map(struct pinctrl_dev *pctldev,
-			       struct pinctrl_map *map, unsigned num_maps)
+static void tegra_pinctrl_dt_free_map(struct pinctrl_dev *pctldev,
+				      struct pinctrl_map *map,
+				      unsigned num_maps)
 {
 	int i;
 
@@ -209,11 +210,11 @@
 	{"nvidia,slew-rate-rising",	TEGRA_PINCONF_PARAM_SLEW_RATE_RISING},
 };
 
-int tegra_pinctrl_dt_subnode_to_map(struct device *dev,
-				    struct device_node *np,
-				    struct pinctrl_map **map,
-				    unsigned *reserved_maps,
-				    unsigned *num_maps)
+static int tegra_pinctrl_dt_subnode_to_map(struct device *dev,
+					   struct device_node *np,
+					   struct pinctrl_map **map,
+					   unsigned *reserved_maps,
+					   unsigned *num_maps)
 {
 	int ret, i;
 	const char *function;
@@ -288,9 +289,10 @@
 	return ret;
 }
 
-int tegra_pinctrl_dt_node_to_map(struct pinctrl_dev *pctldev,
-				 struct device_node *np_config,
-				 struct pinctrl_map **map, unsigned *num_maps)
+static int tegra_pinctrl_dt_node_to_map(struct pinctrl_dev *pctldev,
+					struct device_node *np_config,
+					struct pinctrl_map **map,
+					unsigned *num_maps)
 {
 	unsigned reserved_maps;
 	struct device_node *np;
@@ -660,7 +662,7 @@
 }
 #endif
 
-struct pinconf_ops tegra_pinconf_ops = {
+static struct pinconf_ops tegra_pinconf_ops = {
 	.pin_config_get = tegra_pinconf_get,
 	.pin_config_set = tegra_pinconf_set,
 	.pin_config_group_get = tegra_pinconf_group_get,
diff --git a/drivers/pinctrl/pinctrl-u300.c b/drivers/pinctrl/pinctrl-u300.c
index ab09972..8c039ad 100644
--- a/drivers/pinctrl/pinctrl-u300.c
+++ b/drivers/pinctrl/pinctrl-u300.c
@@ -663,8 +663,6 @@
 struct u300_pmx {
 	struct device *dev;
 	struct pinctrl_dev *pctl;
-	u32 phybase;
-	u32 physize;
 	void __iomem *virtbase;
 };
 
@@ -1013,52 +1011,11 @@
 	.disable = u300_pmx_disable,
 };
 
-/*
- * GPIO ranges handled by the application-side COH901XXX GPIO controller
- * Very many pins can be converted into GPIO pins, but we only list those
- * that are useful in practice to cut down on tables.
- */
-#define U300_GPIO_RANGE(a, b, c) { .name = "COH901XXX", .id = a, .base= a, \
-			.pin_base = b, .npins = c }
-
-static struct pinctrl_gpio_range u300_gpio_ranges[] = {
-	U300_GPIO_RANGE(10, 426, 1),
-	U300_GPIO_RANGE(11, 180, 1),
-	U300_GPIO_RANGE(12, 165, 1), /* MS/MMC card insertion */
-	U300_GPIO_RANGE(13, 179, 1),
-	U300_GPIO_RANGE(14, 178, 1),
-	U300_GPIO_RANGE(16, 194, 1),
-	U300_GPIO_RANGE(17, 193, 1),
-	U300_GPIO_RANGE(18, 192, 1),
-	U300_GPIO_RANGE(19, 191, 1),
-	U300_GPIO_RANGE(20, 186, 1),
-	U300_GPIO_RANGE(21, 185, 1),
-	U300_GPIO_RANGE(22, 184, 1),
-	U300_GPIO_RANGE(23, 183, 1),
-	U300_GPIO_RANGE(24, 182, 1),
-	U300_GPIO_RANGE(25, 181, 1),
-};
-
-static struct pinctrl_gpio_range *u300_match_gpio_range(unsigned pin)
+static int u300_pin_config_get(struct pinctrl_dev *pctldev, unsigned pin,
+			       unsigned long *config)
 {
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(u300_gpio_ranges); i++) {
-		struct pinctrl_gpio_range *range;
-
-		range = &u300_gpio_ranges[i];
-		if (pin >= range->pin_base &&
-		    pin <= (range->pin_base + range->npins - 1))
-			return range;
-	}
-	return NULL;
-}
-
-int u300_pin_config_get(struct pinctrl_dev *pctldev,
-			unsigned pin,
-			unsigned long *config)
-{
-	struct pinctrl_gpio_range *range = u300_match_gpio_range(pin);
+	struct pinctrl_gpio_range *range =
+		pinctrl_find_gpio_range_from_pin(pctldev, pin);
 
 	/* We get config for those pins we CAN get it for and that's it */
 	if (!range)
@@ -1069,11 +1026,11 @@
 				    config);
 }
 
-int u300_pin_config_set(struct pinctrl_dev *pctldev,
-			unsigned pin,
-			unsigned long config)
+static int u300_pin_config_set(struct pinctrl_dev *pctldev, unsigned pin,
+			       unsigned long config)
 {
-	struct pinctrl_gpio_range *range = u300_match_gpio_range(pin);
+	struct pinctrl_gpio_range *range =
+		pinctrl_find_gpio_range_from_pin(pctldev, pin);
 	int ret;
 
 	if (!range)
@@ -1109,9 +1066,6 @@
 {
 	struct u300_pmx *upmx;
 	struct resource *res;
-	struct gpio_chip *gpio_chip = dev_get_platdata(&pdev->dev);
-	int ret;
-	int i;
 
 	/* Create state holders etc for this driver */
 	upmx = devm_kzalloc(&pdev->dev, sizeof(*upmx), GFP_KERNEL);
@@ -1123,32 +1077,15 @@
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res)
 		return -ENOENT;
-	upmx->phybase = res->start;
-	upmx->physize = resource_size(res);
 
-	if (request_mem_region(upmx->phybase, upmx->physize,
-			       DRIVER_NAME) == NULL) {
-		ret = -ENOMEM;
-		goto out_no_memregion;
-	}
-
-	upmx->virtbase = ioremap(upmx->phybase, upmx->physize);
-	if (!upmx->virtbase) {
-		ret = -ENOMEM;
-		goto out_no_remap;
-	}
+	upmx->virtbase = devm_request_and_ioremap(&pdev->dev, res);
+	if (!upmx->virtbase)
+		return -ENOMEM;
 
 	upmx->pctl = pinctrl_register(&u300_pmx_desc, &pdev->dev, upmx);
 	if (!upmx->pctl) {
 		dev_err(&pdev->dev, "could not register U300 pinmux driver\n");
-		ret = -EINVAL;
-		goto out_no_pmx;
-	}
-
-	/* We will handle a range of GPIO pins */
-	for (i = 0; i < ARRAY_SIZE(u300_gpio_ranges); i++) {
-		u300_gpio_ranges[i].gc = gpio_chip;
-		pinctrl_add_gpio_range(upmx->pctl, &u300_gpio_ranges[i]);
+		return -EINVAL;
 	}
 
 	platform_set_drvdata(pdev, upmx);
@@ -1156,14 +1093,6 @@
 	dev_info(&pdev->dev, "initialized U300 pin control driver\n");
 
 	return 0;
-
-out_no_pmx:
-	iounmap(upmx->virtbase);
-out_no_remap:
-	platform_set_drvdata(pdev, NULL);
-out_no_memregion:
-	release_mem_region(upmx->phybase, upmx->physize);
-	return ret;
 }
 
 static int u300_pmx_remove(struct platform_device *pdev)
@@ -1171,8 +1100,6 @@
 	struct u300_pmx *upmx = platform_get_drvdata(pdev);
 
 	pinctrl_unregister(upmx->pctl);
-	iounmap(upmx->virtbase);
-	release_mem_region(upmx->phybase, upmx->physize);
 	platform_set_drvdata(pdev, NULL);
 
 	return 0;
diff --git a/drivers/pinctrl/pinctrl-xway.c b/drivers/pinctrl/pinctrl-xway.c
index b9bcaec..ad90984 100644
--- a/drivers/pinctrl/pinctrl-xway.c
+++ b/drivers/pinctrl/pinctrl-xway.c
@@ -522,7 +522,7 @@
 	return 0;
 }
 
-struct pinconf_ops xway_pinconf_ops = {
+static struct pinconf_ops xway_pinconf_ops = {
 	.pin_config_get	= xway_pinconf_get,
 	.pin_config_set	= xway_pinconf_set,
 };
diff --git a/drivers/pinctrl/pinmux.c b/drivers/pinctrl/pinmux.c
index 9301a7a..1a00658 100644
--- a/drivers/pinctrl/pinmux.c
+++ b/drivers/pinctrl/pinmux.c
@@ -314,14 +314,11 @@
 {
 	struct pinctrl_dev *pctldev = setting->pctldev;
 	const struct pinmux_ops *pmxops = pctldev->desc->pmxops;
-	const struct pinctrl_ops *pctlops = pctldev->desc->pctlops;
 	char const * const *groups;
 	unsigned num_groups;
 	int ret;
 	const char *group;
 	int i;
-	const unsigned *pins;
-	unsigned num_pins;
 
 	if (!pmxops) {
 		dev_err(pctldev->dev, "does not support mux function\n");
@@ -376,53 +373,12 @@
 	}
 	setting->data.mux.group = ret;
 
-	ret = pctlops->get_group_pins(pctldev, setting->data.mux.group, &pins,
-				      &num_pins);
-	if (ret) {
-		dev_err(pctldev->dev,
-			"could not get pins for device %s group selector %d\n",
-			pinctrl_dev_get_name(pctldev), setting->data.mux.group);
-			return -ENODEV;
-	}
-
-	/* Try to allocate all pins in this group, one by one */
-	for (i = 0; i < num_pins; i++) {
-		ret = pin_request(pctldev, pins[i], map->dev_name, NULL);
-		if (ret) {
-			dev_err(pctldev->dev,
-				"could not request pin %d on device %s\n",
-				pins[i], pinctrl_dev_get_name(pctldev));
-			/* On error release all taken pins */
-			i--; /* this pin just failed */
-			for (; i >= 0; i--)
-				pin_free(pctldev, pins[i], NULL);
-			return -ENODEV;
-		}
-	}
-
 	return 0;
 }
 
 void pinmux_free_setting(struct pinctrl_setting const *setting)
 {
-	struct pinctrl_dev *pctldev = setting->pctldev;
-	const struct pinctrl_ops *pctlops = pctldev->desc->pctlops;
-	const unsigned *pins;
-	unsigned num_pins;
-	int ret;
-	int i;
-
-	ret = pctlops->get_group_pins(pctldev, setting->data.mux.group,
-				      &pins, &num_pins);
-	if (ret) {
-		dev_err(pctldev->dev,
-			"could not get pins for device %s group selector %d\n",
-			pinctrl_dev_get_name(pctldev), setting->data.mux.group);
-		return;
-	}
-
-	for (i = 0; i < num_pins; i++)
-		pin_free(pctldev, pins[i], NULL);
+	/* This function is currently unused */
 }
 
 int pinmux_enable_setting(struct pinctrl_setting const *setting)
@@ -446,6 +402,18 @@
 		num_pins = 0;
 	}
 
+	/* Try to allocate all pins in this group, one by one */
+	for (i = 0; i < num_pins; i++) {
+		ret = pin_request(pctldev, pins[i], setting->dev_name, NULL);
+		if (ret) {
+			dev_err(pctldev->dev,
+				"could not request pin %d on device %s\n",
+				pins[i], pinctrl_dev_get_name(pctldev));
+			goto err_pin_request;
+		}
+	}
+
+	/* Now that we have acquired the pins, encode the mux setting */
 	for (i = 0; i < num_pins; i++) {
 		desc = pin_desc_get(pctldev, pins[i]);
 		if (desc == NULL) {
@@ -457,8 +425,26 @@
 		desc->mux_setting = &(setting->data.mux);
 	}
 
-	return ops->enable(pctldev, setting->data.mux.func,
-			   setting->data.mux.group);
+	ret = ops->enable(pctldev, setting->data.mux.func,
+			  setting->data.mux.group);
+
+	if (ret)
+		goto err_enable;
+
+	return 0;
+
+err_enable:
+	for (i = 0; i < num_pins; i++) {
+		desc = pin_desc_get(pctldev, pins[i]);
+		if (desc)
+			desc->mux_setting = NULL;
+	}
+err_pin_request:
+	/* On error release all taken pins */
+	while (--i >= 0)
+		pin_free(pctldev, pins[i], NULL);
+
+	return ret;
 }
 
 void pinmux_disable_setting(struct pinctrl_setting const *setting)
@@ -482,6 +468,7 @@
 		num_pins = 0;
 	}
 
+	/* Flag the descs that no setting is active */
 	for (i = 0; i < num_pins; i++) {
 		desc = pin_desc_get(pctldev, pins[i]);
 		if (desc == NULL) {
@@ -493,6 +480,10 @@
 		desc->mux_setting = NULL;
 	}
 
+	/* And release the pins */
+	for (i = 0; i < num_pins; i++)
+		pin_free(pctldev, pins[i], NULL);
+
 	if (ops->disable)
 		ops->disable(pctldev, setting->data.mux.func, setting->data.mux.group);
 }
diff --git a/drivers/pinctrl/spear/Kconfig b/drivers/pinctrl/spear/Kconfig
index 91558791..04d93e6 100644
--- a/drivers/pinctrl/spear/Kconfig
+++ b/drivers/pinctrl/spear/Kconfig
@@ -25,20 +25,31 @@
 	bool "ST Microelectronics SPEAr310 SoC pin controller driver"
 	depends on MACH_SPEAR310
 	select PINCTRL_SPEAR3XX
+	select PINCTRL_SPEAR_PLGPIO
 
 config PINCTRL_SPEAR320
 	bool "ST Microelectronics SPEAr320 SoC pin controller driver"
 	depends on MACH_SPEAR320
 	select PINCTRL_SPEAR3XX
+	select PINCTRL_SPEAR_PLGPIO
 
 config PINCTRL_SPEAR1310
 	bool "ST Microelectronics SPEAr1310 SoC pin controller driver"
 	depends on MACH_SPEAR1310
 	select PINCTRL_SPEAR
+	select PINCTRL_SPEAR_PLGPIO
 
 config PINCTRL_SPEAR1340
 	bool "ST Microelectronics SPEAr1340 SoC pin controller driver"
 	depends on MACH_SPEAR1340
 	select PINCTRL_SPEAR
+	select PINCTRL_SPEAR_PLGPIO
+
+config PINCTRL_SPEAR_PLGPIO
+	bool "SPEAr SoC PLGPIO Controller"
+	depends on GPIOLIB && PINCTRL_SPEAR
+	help
+	  Say yes here to support PLGPIO controller on ST Microelectronics SPEAr
+	  SoCs.
 
 endif
diff --git a/drivers/pinctrl/spear/Makefile b/drivers/pinctrl/spear/Makefile
index b28a7ba..0e400eb 100644
--- a/drivers/pinctrl/spear/Makefile
+++ b/drivers/pinctrl/spear/Makefile
@@ -1,5 +1,6 @@
 # SPEAr pinmux support
 
+obj-$(CONFIG_PINCTRL_SPEAR_PLGPIO)	+= pinctrl-plgpio.o
 obj-$(CONFIG_PINCTRL_SPEAR)	+= pinctrl-spear.o
 obj-$(CONFIG_PINCTRL_SPEAR3XX)	+= pinctrl-spear3xx.o
 obj-$(CONFIG_PINCTRL_SPEAR300)	+= pinctrl-spear300.o
diff --git a/drivers/pinctrl/spear/pinctrl-plgpio.c b/drivers/pinctrl/spear/pinctrl-plgpio.c
new file mode 100644
index 0000000..4c04505
--- /dev/null
+++ b/drivers/pinctrl/spear/pinctrl-plgpio.c
@@ -0,0 +1,758 @@
+/*
+ * SPEAr platform PLGPIO driver
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@linaro.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/module.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/spinlock.h>
+#include <asm/mach/irq.h>
+
+#define MAX_GPIO_PER_REG		32
+#define PIN_OFFSET(pin)			(pin % MAX_GPIO_PER_REG)
+#define REG_OFFSET(base, reg, pin)	(base + reg + (pin / MAX_GPIO_PER_REG) \
+							* sizeof(int *))
+
+/*
+ * plgpio pins in all machines are not one to one mapped, bitwise with registers
+ * bits. These set of macros define register masks for which below functions
+ * (pin_to_offset and offset_to_pin) are required to be called.
+ */
+#define PTO_ENB_REG		0x001
+#define PTO_WDATA_REG		0x002
+#define PTO_DIR_REG		0x004
+#define PTO_IE_REG		0x008
+#define PTO_RDATA_REG		0x010
+#define PTO_MIS_REG		0x020
+
+struct plgpio_regs {
+	u32 enb;		/* enable register */
+	u32 wdata;		/* write data register */
+	u32 dir;		/* direction set register */
+	u32 rdata;		/* read data register */
+	u32 ie;			/* interrupt enable register */
+	u32 mis;		/* mask interrupt status register */
+	u32 eit;		/* edge interrupt type */
+};
+
+/*
+ * struct plgpio: plgpio driver specific structure
+ *
+ * lock: lock for guarding gpio registers
+ * base: base address of plgpio block
+ * irq_base: irq number of plgpio0
+ * chip: gpio framework specific chip information structure
+ * p2o: function ptr for pin to offset conversion. This is required only for
+ *	machines where mapping b/w pin and offset is not 1-to-1.
+ * o2p: function ptr for offset to pin conversion. This is required only for
+ *	machines where mapping b/w pin and offset is not 1-to-1.
+ * p2o_regs: mask of registers for which p2o and o2p are applicable
+ * regs: register offsets
+ * csave_regs: context save registers for standby/sleep/hibernate cases
+ */
+struct plgpio {
+	spinlock_t		lock;
+	void __iomem		*base;
+	struct clk		*clk;
+	unsigned		irq_base;
+	struct irq_domain	*irq_domain;
+	struct gpio_chip	chip;
+	int			(*p2o)(int pin);	/* pin_to_offset */
+	int			(*o2p)(int offset);	/* offset_to_pin */
+	u32			p2o_regs;
+	struct plgpio_regs	regs;
+#ifdef CONFIG_PM
+	struct plgpio_regs	*csave_regs;
+#endif
+};
+
+/* register manipulation inline functions */
+static inline u32 is_plgpio_set(void __iomem *base, u32 pin, u32 reg)
+{
+	u32 offset = PIN_OFFSET(pin);
+	void __iomem *reg_off = REG_OFFSET(base, reg, pin);
+	u32 val = readl_relaxed(reg_off);
+
+	return !!(val & (1 << offset));
+}
+
+static inline void plgpio_reg_set(void __iomem *base, u32 pin, u32 reg)
+{
+	u32 offset = PIN_OFFSET(pin);
+	void __iomem *reg_off = REG_OFFSET(base, reg, pin);
+	u32 val = readl_relaxed(reg_off);
+
+	writel_relaxed(val | (1 << offset), reg_off);
+}
+
+static inline void plgpio_reg_reset(void __iomem *base, u32 pin, u32 reg)
+{
+	u32 offset = PIN_OFFSET(pin);
+	void __iomem *reg_off = REG_OFFSET(base, reg, pin);
+	u32 val = readl_relaxed(reg_off);
+
+	writel_relaxed(val & ~(1 << offset), reg_off);
+}
+
+/* gpio framework specific routines */
+static int plgpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct plgpio *plgpio = container_of(chip, struct plgpio, chip);
+	unsigned long flags;
+
+	/* get correct offset for "offset" pin */
+	if (plgpio->p2o && (plgpio->p2o_regs & PTO_DIR_REG)) {
+		offset = plgpio->p2o(offset);
+		if (offset == -1)
+			return -EINVAL;
+	}
+
+	spin_lock_irqsave(&plgpio->lock, flags);
+	plgpio_reg_set(plgpio->base, offset, plgpio->regs.dir);
+	spin_unlock_irqrestore(&plgpio->lock, flags);
+
+	return 0;
+}
+
+static int plgpio_direction_output(struct gpio_chip *chip, unsigned offset,
+		int value)
+{
+	struct plgpio *plgpio = container_of(chip, struct plgpio, chip);
+	unsigned long flags;
+	unsigned dir_offset = offset, wdata_offset = offset, tmp;
+
+	/* get correct offset for "offset" pin */
+	if (plgpio->p2o && (plgpio->p2o_regs & (PTO_DIR_REG | PTO_WDATA_REG))) {
+		tmp = plgpio->p2o(offset);
+		if (tmp == -1)
+			return -EINVAL;
+
+		if (plgpio->p2o_regs & PTO_DIR_REG)
+			dir_offset = tmp;
+		if (plgpio->p2o_regs & PTO_WDATA_REG)
+			wdata_offset = tmp;
+	}
+
+	spin_lock_irqsave(&plgpio->lock, flags);
+	if (value)
+		plgpio_reg_set(plgpio->base, wdata_offset,
+				plgpio->regs.wdata);
+	else
+		plgpio_reg_reset(plgpio->base, wdata_offset,
+				plgpio->regs.wdata);
+
+	plgpio_reg_reset(plgpio->base, dir_offset, plgpio->regs.dir);
+	spin_unlock_irqrestore(&plgpio->lock, flags);
+
+	return 0;
+}
+
+static int plgpio_get_value(struct gpio_chip *chip, unsigned offset)
+{
+	struct plgpio *plgpio = container_of(chip, struct plgpio, chip);
+
+	if (offset >= chip->ngpio)
+		return -EINVAL;
+
+	/* get correct offset for "offset" pin */
+	if (plgpio->p2o && (plgpio->p2o_regs & PTO_RDATA_REG)) {
+		offset = plgpio->p2o(offset);
+		if (offset == -1)
+			return -EINVAL;
+	}
+
+	return is_plgpio_set(plgpio->base, offset, plgpio->regs.rdata);
+}
+
+static void plgpio_set_value(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct plgpio *plgpio = container_of(chip, struct plgpio, chip);
+
+	if (offset >= chip->ngpio)
+		return;
+
+	/* get correct offset for "offset" pin */
+	if (plgpio->p2o && (plgpio->p2o_regs & PTO_WDATA_REG)) {
+		offset = plgpio->p2o(offset);
+		if (offset == -1)
+			return;
+	}
+
+	if (value)
+		plgpio_reg_set(plgpio->base, offset, plgpio->regs.wdata);
+	else
+		plgpio_reg_reset(plgpio->base, offset, plgpio->regs.wdata);
+}
+
+static int plgpio_request(struct gpio_chip *chip, unsigned offset)
+{
+	struct plgpio *plgpio = container_of(chip, struct plgpio, chip);
+	int gpio = chip->base + offset;
+	unsigned long flags;
+	int ret = 0;
+
+	if (offset >= chip->ngpio)
+		return -EINVAL;
+
+	ret = pinctrl_request_gpio(gpio);
+	if (ret)
+		return ret;
+
+	if (!IS_ERR(plgpio->clk)) {
+		ret = clk_enable(plgpio->clk);
+		if (ret)
+			goto err0;
+	}
+
+	if (plgpio->regs.enb == -1)
+		return 0;
+
+	/*
+	 * put gpio in IN mode before enabling it. This make enabling gpio safe
+	 */
+	ret = plgpio_direction_input(chip, offset);
+	if (ret)
+		goto err1;
+
+	/* get correct offset for "offset" pin */
+	if (plgpio->p2o && (plgpio->p2o_regs & PTO_ENB_REG)) {
+		offset = plgpio->p2o(offset);
+		if (offset == -1) {
+			ret = -EINVAL;
+			goto err1;
+		}
+	}
+
+	spin_lock_irqsave(&plgpio->lock, flags);
+	plgpio_reg_set(plgpio->base, offset, plgpio->regs.enb);
+	spin_unlock_irqrestore(&plgpio->lock, flags);
+	return 0;
+
+err1:
+	if (!IS_ERR(plgpio->clk))
+		clk_disable(plgpio->clk);
+err0:
+	pinctrl_free_gpio(gpio);
+	return ret;
+}
+
+static void plgpio_free(struct gpio_chip *chip, unsigned offset)
+{
+	struct plgpio *plgpio = container_of(chip, struct plgpio, chip);
+	int gpio = chip->base + offset;
+	unsigned long flags;
+
+	if (offset >= chip->ngpio)
+		return;
+
+	if (plgpio->regs.enb == -1)
+		goto disable_clk;
+
+	/* get correct offset for "offset" pin */
+	if (plgpio->p2o && (plgpio->p2o_regs & PTO_ENB_REG)) {
+		offset = plgpio->p2o(offset);
+		if (offset == -1)
+			return;
+	}
+
+	spin_lock_irqsave(&plgpio->lock, flags);
+	plgpio_reg_reset(plgpio->base, offset, plgpio->regs.enb);
+	spin_unlock_irqrestore(&plgpio->lock, flags);
+
+disable_clk:
+	if (!IS_ERR(plgpio->clk))
+		clk_disable(plgpio->clk);
+
+	pinctrl_free_gpio(gpio);
+}
+
+static int plgpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	struct plgpio *plgpio = container_of(chip, struct plgpio, chip);
+
+	if (IS_ERR_VALUE(plgpio->irq_base))
+		return -EINVAL;
+
+	return irq_find_mapping(plgpio->irq_domain, offset);
+}
+
+/* PLGPIO IRQ */
+static void plgpio_irq_disable(struct irq_data *d)
+{
+	struct plgpio *plgpio = irq_data_get_irq_chip_data(d);
+	int offset = d->irq - plgpio->irq_base;
+	unsigned long flags;
+
+	/* get correct offset for "offset" pin */
+	if (plgpio->p2o && (plgpio->p2o_regs & PTO_IE_REG)) {
+		offset = plgpio->p2o(offset);
+		if (offset == -1)
+			return;
+	}
+
+	spin_lock_irqsave(&plgpio->lock, flags);
+	plgpio_reg_set(plgpio->base, offset, plgpio->regs.ie);
+	spin_unlock_irqrestore(&plgpio->lock, flags);
+}
+
+static void plgpio_irq_enable(struct irq_data *d)
+{
+	struct plgpio *plgpio = irq_data_get_irq_chip_data(d);
+	int offset = d->irq - plgpio->irq_base;
+	unsigned long flags;
+
+	/* get correct offset for "offset" pin */
+	if (plgpio->p2o && (plgpio->p2o_regs & PTO_IE_REG)) {
+		offset = plgpio->p2o(offset);
+		if (offset == -1)
+			return;
+	}
+
+	spin_lock_irqsave(&plgpio->lock, flags);
+	plgpio_reg_reset(plgpio->base, offset, plgpio->regs.ie);
+	spin_unlock_irqrestore(&plgpio->lock, flags);
+}
+
+static int plgpio_irq_set_type(struct irq_data *d, unsigned trigger)
+{
+	struct plgpio *plgpio = irq_data_get_irq_chip_data(d);
+	int offset = d->irq - plgpio->irq_base;
+	void __iomem *reg_off;
+	unsigned int supported_type = 0, val;
+
+	if (offset >= plgpio->chip.ngpio)
+		return -EINVAL;
+
+	if (plgpio->regs.eit == -1)
+		supported_type = IRQ_TYPE_LEVEL_HIGH;
+	else
+		supported_type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
+
+	if (!(trigger & supported_type))
+		return -EINVAL;
+
+	if (plgpio->regs.eit == -1)
+		return 0;
+
+	reg_off = REG_OFFSET(plgpio->base, plgpio->regs.eit, offset);
+	val = readl_relaxed(reg_off);
+
+	offset = PIN_OFFSET(offset);
+	if (trigger & IRQ_TYPE_EDGE_RISING)
+		writel_relaxed(val | (1 << offset), reg_off);
+	else
+		writel_relaxed(val & ~(1 << offset), reg_off);
+
+	return 0;
+}
+
+static struct irq_chip plgpio_irqchip = {
+	.name		= "PLGPIO",
+	.irq_enable	= plgpio_irq_enable,
+	.irq_disable	= plgpio_irq_disable,
+	.irq_set_type	= plgpio_irq_set_type,
+};
+
+static void plgpio_irq_handler(unsigned irq, struct irq_desc *desc)
+{
+	struct plgpio *plgpio = irq_get_handler_data(irq);
+	struct irq_chip *irqchip = irq_desc_get_chip(desc);
+	int regs_count, count, pin, offset, i = 0;
+	unsigned long pending;
+
+	count = plgpio->chip.ngpio;
+	regs_count = DIV_ROUND_UP(count, MAX_GPIO_PER_REG);
+
+	chained_irq_enter(irqchip, desc);
+	/* check all plgpio MIS registers for a possible interrupt */
+	for (; i < regs_count; i++) {
+		pending = readl_relaxed(plgpio->base + plgpio->regs.mis +
+				i * sizeof(int *));
+		if (!pending)
+			continue;
+
+		/* clear interrupts */
+		writel_relaxed(~pending, plgpio->base + plgpio->regs.mis +
+				i * sizeof(int *));
+		/*
+		 * clear extra bits in last register having gpios < MAX/REG
+		 * ex: Suppose there are max 102 plgpios. then last register
+		 * must have only (102 - MAX_GPIO_PER_REG * 3) = 6 relevant bits
+		 * so, we must not take other 28 bits into consideration for
+		 * checking interrupt. so clear those bits.
+		 */
+		count = count - i * MAX_GPIO_PER_REG;
+		if (count < MAX_GPIO_PER_REG)
+			pending &= (1 << count) - 1;
+
+		for_each_set_bit(offset, &pending, MAX_GPIO_PER_REG) {
+			/* get correct pin for "offset" */
+			if (plgpio->o2p && (plgpio->p2o_regs & PTO_MIS_REG)) {
+				pin = plgpio->o2p(offset);
+				if (pin == -1)
+					continue;
+			} else
+				pin = offset;
+
+			/* get correct irq line number */
+			pin = i * MAX_GPIO_PER_REG + pin;
+			generic_handle_irq(plgpio_to_irq(&plgpio->chip, pin));
+		}
+	}
+	chained_irq_exit(irqchip, desc);
+}
+
+/*
+ * pin to offset and offset to pin converter functions
+ *
+ * In spear310 there is inconsistency among bit positions in plgpio regiseters,
+ * for different plgpio pins. For example: for pin 27, bit offset is 23, pin
+ * 28-33 are not supported, pin 95 has offset bit 95, bit 100 has offset bit 1
+ */
+static int spear310_p2o(int pin)
+{
+	int offset = pin;
+
+	if (pin <= 27)
+		offset += 4;
+	else if (pin <= 33)
+		offset = -1;
+	else if (pin <= 97)
+		offset -= 2;
+	else if (pin <= 101)
+		offset = 101 - pin;
+	else
+		offset = -1;
+
+	return offset;
+}
+
+int spear310_o2p(int offset)
+{
+	if (offset <= 3)
+		return 101 - offset;
+	else if (offset <= 31)
+		return offset - 4;
+	else
+		return offset + 2;
+}
+
+static int __devinit plgpio_probe_dt(struct platform_device *pdev,
+		struct plgpio *plgpio)
+{
+	struct device_node *np = pdev->dev.of_node;
+	int ret = -EINVAL;
+	u32 val;
+
+	if (of_machine_is_compatible("st,spear310")) {
+		plgpio->p2o = spear310_p2o;
+		plgpio->o2p = spear310_o2p;
+		plgpio->p2o_regs = PTO_WDATA_REG | PTO_DIR_REG | PTO_IE_REG |
+			PTO_RDATA_REG | PTO_MIS_REG;
+	}
+
+	if (!of_property_read_u32(np, "st-plgpio,ngpio", &val)) {
+		plgpio->chip.ngpio = val;
+	} else {
+		dev_err(&pdev->dev, "DT: Invalid ngpio field\n");
+		goto end;
+	}
+
+	if (!of_property_read_u32(np, "st-plgpio,enb-reg", &val))
+		plgpio->regs.enb = val;
+	else
+		plgpio->regs.enb = -1;
+
+	if (!of_property_read_u32(np, "st-plgpio,wdata-reg", &val)) {
+		plgpio->regs.wdata = val;
+	} else {
+		dev_err(&pdev->dev, "DT: Invalid wdata reg\n");
+		goto end;
+	}
+
+	if (!of_property_read_u32(np, "st-plgpio,dir-reg", &val)) {
+		plgpio->regs.dir = val;
+	} else {
+		dev_err(&pdev->dev, "DT: Invalid dir reg\n");
+		goto end;
+	}
+
+	if (!of_property_read_u32(np, "st-plgpio,ie-reg", &val)) {
+		plgpio->regs.ie = val;
+	} else {
+		dev_err(&pdev->dev, "DT: Invalid ie reg\n");
+		goto end;
+	}
+
+	if (!of_property_read_u32(np, "st-plgpio,rdata-reg", &val)) {
+		plgpio->regs.rdata = val;
+	} else {
+		dev_err(&pdev->dev, "DT: Invalid rdata reg\n");
+		goto end;
+	}
+
+	if (!of_property_read_u32(np, "st-plgpio,mis-reg", &val)) {
+		plgpio->regs.mis = val;
+	} else {
+		dev_err(&pdev->dev, "DT: Invalid mis reg\n");
+		goto end;
+	}
+
+	if (!of_property_read_u32(np, "st-plgpio,eit-reg", &val))
+		plgpio->regs.eit = val;
+	else
+		plgpio->regs.eit = -1;
+
+	return 0;
+
+end:
+	return ret;
+}
+static int __devinit plgpio_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct plgpio *plgpio;
+	struct resource *res;
+	int ret, irq, i;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "invalid IORESOURCE_MEM\n");
+		return -EBUSY;
+	}
+
+	plgpio = devm_kzalloc(&pdev->dev, sizeof(*plgpio), GFP_KERNEL);
+	if (!plgpio) {
+		dev_err(&pdev->dev, "memory allocation fail\n");
+		return -ENOMEM;
+	}
+
+	plgpio->base = devm_request_and_ioremap(&pdev->dev, res);
+	if (!plgpio->base) {
+		dev_err(&pdev->dev, "request and ioremap fail\n");
+		return -ENOMEM;
+	}
+
+	ret = plgpio_probe_dt(pdev, plgpio);
+	if (ret) {
+		dev_err(&pdev->dev, "DT probe failed\n");
+		return ret;
+	}
+
+	plgpio->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(plgpio->clk))
+		dev_warn(&pdev->dev, "clk_get() failed, work without it\n");
+
+#ifdef CONFIG_PM
+	plgpio->csave_regs = devm_kzalloc(&pdev->dev,
+			sizeof(*plgpio->csave_regs) *
+			DIV_ROUND_UP(plgpio->chip.ngpio, MAX_GPIO_PER_REG),
+			GFP_KERNEL);
+	if (!plgpio->csave_regs) {
+		dev_err(&pdev->dev, "csave registers memory allocation fail\n");
+		return -ENOMEM;
+	}
+#endif
+
+	platform_set_drvdata(pdev, plgpio);
+	spin_lock_init(&plgpio->lock);
+
+	plgpio->irq_base = -1;
+	plgpio->chip.base = -1;
+	plgpio->chip.request = plgpio_request;
+	plgpio->chip.free = plgpio_free;
+	plgpio->chip.direction_input = plgpio_direction_input;
+	plgpio->chip.direction_output = plgpio_direction_output;
+	plgpio->chip.get = plgpio_get_value;
+	plgpio->chip.set = plgpio_set_value;
+	plgpio->chip.to_irq = plgpio_to_irq;
+	plgpio->chip.label = dev_name(&pdev->dev);
+	plgpio->chip.dev = &pdev->dev;
+	plgpio->chip.owner = THIS_MODULE;
+
+	if (!IS_ERR(plgpio->clk)) {
+		ret = clk_prepare(plgpio->clk);
+		if (ret) {
+			dev_err(&pdev->dev, "clk prepare failed\n");
+			return ret;
+		}
+	}
+
+	ret = gpiochip_add(&plgpio->chip);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to add gpio chip\n");
+		goto unprepare_clk;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_info(&pdev->dev, "irqs not supported\n");
+		return 0;
+	}
+
+	plgpio->irq_base = irq_alloc_descs(-1, 0, plgpio->chip.ngpio, 0);
+	if (IS_ERR_VALUE(plgpio->irq_base)) {
+		/* we would not support irq for gpio */
+		dev_warn(&pdev->dev, "couldn't allocate irq base\n");
+		return 0;
+	}
+
+	plgpio->irq_domain = irq_domain_add_legacy(np, plgpio->chip.ngpio,
+			plgpio->irq_base, 0, &irq_domain_simple_ops, NULL);
+	if (WARN_ON(!plgpio->irq_domain)) {
+		dev_err(&pdev->dev, "irq domain init failed\n");
+		irq_free_descs(plgpio->irq_base, plgpio->chip.ngpio);
+		ret = -ENXIO;
+		goto remove_gpiochip;
+	}
+
+	irq_set_chained_handler(irq, plgpio_irq_handler);
+	for (i = 0; i < plgpio->chip.ngpio; i++) {
+		irq_set_chip_and_handler(i + plgpio->irq_base, &plgpio_irqchip,
+				handle_simple_irq);
+		set_irq_flags(i + plgpio->irq_base, IRQF_VALID);
+		irq_set_chip_data(i + plgpio->irq_base, plgpio);
+	}
+
+	irq_set_handler_data(irq, plgpio);
+	dev_info(&pdev->dev, "PLGPIO registered with IRQs\n");
+
+	return 0;
+
+remove_gpiochip:
+	dev_info(&pdev->dev, "Remove gpiochip\n");
+	if (gpiochip_remove(&plgpio->chip))
+		dev_err(&pdev->dev, "unable to remove gpiochip\n");
+unprepare_clk:
+	if (!IS_ERR(plgpio->clk))
+		clk_unprepare(plgpio->clk);
+
+	return ret;
+}
+
+#ifdef CONFIG_PM
+static int plgpio_suspend(struct device *dev)
+{
+	struct plgpio *plgpio = dev_get_drvdata(dev);
+	int i, reg_count = DIV_ROUND_UP(plgpio->chip.ngpio, MAX_GPIO_PER_REG);
+	void __iomem *off;
+
+	for (i = 0; i < reg_count; i++) {
+		off = plgpio->base + i * sizeof(int *);
+
+		if (plgpio->regs.enb != -1)
+			plgpio->csave_regs[i].enb =
+				readl_relaxed(plgpio->regs.enb + off);
+		if (plgpio->regs.eit != -1)
+			plgpio->csave_regs[i].eit =
+				readl_relaxed(plgpio->regs.eit + off);
+		plgpio->csave_regs[i].wdata = readl_relaxed(plgpio->regs.wdata +
+				off);
+		plgpio->csave_regs[i].dir = readl_relaxed(plgpio->regs.dir +
+				off);
+		plgpio->csave_regs[i].ie = readl_relaxed(plgpio->regs.ie + off);
+	}
+
+	return 0;
+}
+
+/*
+ * This is used to correct the values in end registers. End registers contain
+ * extra bits that might be used for other purpose in platform. So, we shouldn't
+ * overwrite these bits. This macro, reads given register again, preserves other
+ * bit values (non-plgpio bits), and retain captured value (plgpio bits).
+ */
+#define plgpio_prepare_reg(__reg, _off, _mask, _tmp)		\
+{								\
+	_tmp = readl_relaxed(plgpio->regs.__reg + _off);		\
+	_tmp &= ~_mask;						\
+	plgpio->csave_regs[i].__reg =				\
+		_tmp | (plgpio->csave_regs[i].__reg & _mask);	\
+}
+
+static int plgpio_resume(struct device *dev)
+{
+	struct plgpio *plgpio = dev_get_drvdata(dev);
+	int i, reg_count = DIV_ROUND_UP(plgpio->chip.ngpio, MAX_GPIO_PER_REG);
+	void __iomem *off;
+	u32 mask, tmp;
+
+	for (i = 0; i < reg_count; i++) {
+		off = plgpio->base + i * sizeof(int *);
+
+		if (i == reg_count - 1) {
+			mask = (1 << (plgpio->chip.ngpio - i *
+						MAX_GPIO_PER_REG)) - 1;
+
+			if (plgpio->regs.enb != -1)
+				plgpio_prepare_reg(enb, off, mask, tmp);
+
+			if (plgpio->regs.eit != -1)
+				plgpio_prepare_reg(eit, off, mask, tmp);
+
+			plgpio_prepare_reg(wdata, off, mask, tmp);
+			plgpio_prepare_reg(dir, off, mask, tmp);
+			plgpio_prepare_reg(ie, off, mask, tmp);
+		}
+
+		writel_relaxed(plgpio->csave_regs[i].wdata, plgpio->regs.wdata +
+				off);
+		writel_relaxed(plgpio->csave_regs[i].dir, plgpio->regs.dir +
+				off);
+
+		if (plgpio->regs.eit != -1)
+			writel_relaxed(plgpio->csave_regs[i].eit,
+					plgpio->regs.eit + off);
+
+		writel_relaxed(plgpio->csave_regs[i].ie, plgpio->regs.ie + off);
+
+		if (plgpio->regs.enb != -1)
+			writel_relaxed(plgpio->csave_regs[i].enb,
+					plgpio->regs.enb + off);
+	}
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(plgpio_dev_pm_ops, plgpio_suspend, plgpio_resume);
+
+static const struct of_device_id plgpio_of_match[] = {
+	{ .compatible = "st,spear-plgpio" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, plgpio_of_match);
+
+static struct platform_driver plgpio_driver = {
+	.probe = plgpio_probe,
+	.driver = {
+		.owner = THIS_MODULE,
+		.name = "spear-plgpio",
+		.pm = &plgpio_dev_pm_ops,
+		.of_match_table = of_match_ptr(plgpio_of_match),
+	},
+};
+
+static int __init plgpio_init(void)
+{
+	return platform_driver_register(&plgpio_driver);
+}
+subsys_initcall(plgpio_init);
+
+MODULE_AUTHOR("Viresh Kumar <viresh.kumar@linaro.org>");
+MODULE_DESCRIPTION("ST Microlectronics SPEAr PLGPIO driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/pinctrl/spear/pinctrl-spear.c b/drivers/pinctrl/spear/pinctrl-spear.c
index 66cf948..922c057 100644
--- a/drivers/pinctrl/spear/pinctrl-spear.c
+++ b/drivers/pinctrl/spear/pinctrl-spear.c
@@ -14,10 +14,10 @@
  */
 
 #include <linux/err.h>
-#include <linux/io.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/of_gpio.h>
 #include <linux/pinctrl/machine.h>
 #include <linux/pinctrl/pinctrl.h>
 #include <linux/pinctrl/pinmux.h>
@@ -28,14 +28,26 @@
 
 #define DRIVER_NAME "spear-pinmux"
 
-static inline u32 pmx_readl(struct spear_pmx *pmx, u32 reg)
+static void muxregs_endisable(struct spear_pmx *pmx,
+		struct spear_muxreg *muxregs, u8 count, bool enable)
 {
-	return readl_relaxed(pmx->vbase + reg);
-}
+	struct spear_muxreg *muxreg;
+	u32 val, temp, j;
 
-static inline void pmx_writel(struct spear_pmx *pmx, u32 val, u32 reg)
-{
-	writel_relaxed(val, pmx->vbase + reg);
+	for (j = 0; j < count; j++) {
+		muxreg = &muxregs[j];
+
+		val = pmx_readl(pmx, muxreg->reg);
+		val &= ~muxreg->mask;
+
+		if (enable)
+			temp = muxreg->val;
+		else
+			temp = ~muxreg->val;
+
+		val |= muxreg->mask & temp;
+		pmx_writel(pmx, val, muxreg->reg);
+	}
 }
 
 static int set_mode(struct spear_pmx *pmx, int mode)
@@ -70,6 +82,17 @@
 	return 0;
 }
 
+void __devinit
+pmx_init_gpio_pingroup_addr(struct spear_gpio_pingroup *gpio_pingroup,
+		unsigned count, u16 reg)
+{
+	int i, j;
+
+	for (i = 0; i < count; i++)
+		for (j = 0; j < gpio_pingroup[i].nmuxregs; j++)
+			gpio_pingroup[i].muxregs[j].reg = reg;
+}
+
 void __devinit pmx_init_addr(struct spear_pinctrl_machdata *machdata, u16 reg)
 {
 	struct spear_pingroup *pgroup;
@@ -121,9 +144,10 @@
 	seq_printf(s, " " DRIVER_NAME);
 }
 
-int spear_pinctrl_dt_node_to_map(struct pinctrl_dev *pctldev,
-				 struct device_node *np_config,
-				 struct pinctrl_map **map, unsigned *num_maps)
+static int spear_pinctrl_dt_node_to_map(struct pinctrl_dev *pctldev,
+					struct device_node *np_config,
+					struct pinctrl_map **map,
+					unsigned *num_maps)
 {
 	struct spear_pmx *pmx = pinctrl_dev_get_drvdata(pctldev);
 	struct device_node *np;
@@ -168,8 +192,9 @@
 	return 0;
 }
 
-void spear_pinctrl_dt_free_map(struct pinctrl_dev *pctldev,
-		struct pinctrl_map *map, unsigned num_maps)
+static void spear_pinctrl_dt_free_map(struct pinctrl_dev *pctldev,
+				      struct pinctrl_map *map,
+				      unsigned num_maps)
 {
 	kfree(map);
 }
@@ -216,9 +241,7 @@
 	struct spear_pmx *pmx = pinctrl_dev_get_drvdata(pctldev);
 	const struct spear_pingroup *pgroup;
 	const struct spear_modemux *modemux;
-	struct spear_muxreg *muxreg;
-	u32 val, temp;
-	int i, j;
+	int i;
 	bool found = false;
 
 	pgroup = pmx->machdata->groups[group];
@@ -233,20 +256,8 @@
 		}
 
 		found = true;
-		for (j = 0; j < modemux->nmuxregs; j++) {
-			muxreg = &modemux->muxregs[j];
-
-			val = pmx_readl(pmx, muxreg->reg);
-			val &= ~muxreg->mask;
-
-			if (enable)
-				temp = muxreg->val;
-			else
-				temp = ~muxreg->val;
-
-			val |= muxreg->mask & temp;
-			pmx_writel(pmx, val, muxreg->reg);
-		}
+		muxregs_endisable(pmx, modemux->muxregs, modemux->nmuxregs,
+				enable);
 	}
 
 	if (!found) {
@@ -270,12 +281,74 @@
 	spear_pinctrl_endisable(pctldev, function, group, false);
 }
 
+/* gpio with pinmux */
+static struct spear_gpio_pingroup *get_gpio_pingroup(struct spear_pmx *pmx,
+		unsigned pin)
+{
+	struct spear_gpio_pingroup *gpio_pingroup;
+	int i, j;
+
+	if (!pmx->machdata->gpio_pingroups)
+		return NULL;
+
+	for (i = 0; i < pmx->machdata->ngpio_pingroups; i++) {
+		gpio_pingroup = &pmx->machdata->gpio_pingroups[i];
+
+		for (j = 0; j < gpio_pingroup->npins; j++) {
+			if (gpio_pingroup->pins[j] == pin)
+				return gpio_pingroup;
+		}
+	}
+
+	return NULL;
+}
+
+static int gpio_request_endisable(struct pinctrl_dev *pctldev,
+		struct pinctrl_gpio_range *range, unsigned offset, bool enable)
+{
+	struct spear_pmx *pmx = pinctrl_dev_get_drvdata(pctldev);
+	struct spear_pinctrl_machdata *machdata = pmx->machdata;
+	struct spear_gpio_pingroup *gpio_pingroup;
+
+	/*
+	 * Some SoC have configuration options applicable to group of pins,
+	 * rather than a single pin.
+	 */
+	gpio_pingroup = get_gpio_pingroup(pmx, offset);
+	if (gpio_pingroup)
+		muxregs_endisable(pmx, gpio_pingroup->muxregs,
+				gpio_pingroup->nmuxregs, enable);
+
+	/*
+	 * SoC may need some extra configurations, or configurations for single
+	 * pin
+	 */
+	if (machdata->gpio_request_endisable)
+		machdata->gpio_request_endisable(pmx, offset, enable);
+
+	return 0;
+}
+
+static int gpio_request_enable(struct pinctrl_dev *pctldev,
+		struct pinctrl_gpio_range *range, unsigned offset)
+{
+	return gpio_request_endisable(pctldev, range, offset, true);
+}
+
+static void gpio_disable_free(struct pinctrl_dev *pctldev,
+		struct pinctrl_gpio_range *range, unsigned offset)
+{
+	gpio_request_endisable(pctldev, range, offset, false);
+}
+
 static struct pinmux_ops spear_pinmux_ops = {
 	.get_functions_count = spear_pinctrl_get_funcs_count,
 	.get_function_name = spear_pinctrl_get_func_name,
 	.get_function_groups = spear_pinctrl_get_func_groups,
 	.enable = spear_pinctrl_enable,
 	.disable = spear_pinctrl_disable,
+	.gpio_request_enable = gpio_request_enable,
+	.gpio_disable_free = gpio_disable_free,
 };
 
 static struct pinctrl_desc spear_pinctrl_desc = {
diff --git a/drivers/pinctrl/spear/pinctrl-spear.h b/drivers/pinctrl/spear/pinctrl-spear.h
index 1914e90..1be46ec 100644
--- a/drivers/pinctrl/spear/pinctrl-spear.h
+++ b/drivers/pinctrl/spear/pinctrl-spear.h
@@ -12,11 +12,14 @@
 #ifndef __PINMUX_SPEAR_H__
 #define __PINMUX_SPEAR_H__
 
+#include <linux/gpio.h>
+#include <linux/io.h>
 #include <linux/pinctrl/pinctrl.h>
 #include <linux/types.h>
 
 struct platform_device;
 struct device;
+struct spear_pmx;
 
 /**
  * struct spear_pmx_mode - SPEAr pmx mode
@@ -46,6 +49,44 @@
 	u32 val;
 };
 
+struct spear_gpio_pingroup {
+	const unsigned *pins;
+	unsigned npins;
+	struct spear_muxreg *muxregs;
+	u8 nmuxregs;
+};
+
+/* ste: set to enable */
+#define DEFINE_MUXREG(__pins, __muxreg, __mask, __ste)		\
+static struct spear_muxreg __pins##_muxregs[] = {		\
+	{							\
+		.reg = __muxreg,				\
+		.mask = __mask,					\
+		.val = __ste ? __mask : 0,			\
+	},							\
+}
+
+#define DEFINE_2_MUXREG(__pins, __muxreg1, __muxreg2, __mask, __ste1, __ste2) \
+static struct spear_muxreg __pins##_muxregs[] = {		\
+	{							\
+		.reg = __muxreg1,				\
+		.mask = __mask,					\
+		.val = __ste1 ? __mask : 0,			\
+	}, {							\
+		.reg = __muxreg2,				\
+		.mask = __mask,					\
+		.val = __ste2 ? __mask : 0,			\
+	},							\
+}
+
+#define GPIO_PINGROUP(__pins)					\
+	{							\
+		.pins = __pins,					\
+		.npins = ARRAY_SIZE(__pins),			\
+		.muxregs = __pins##_muxregs,			\
+		.nmuxregs = ARRAY_SIZE(__pins##_muxregs),	\
+	}
+
 /**
  * struct spear_modemux - SPEAr mode mux configuration
  * @modes: mode ids supported by this group of muxregs
@@ -100,6 +141,8 @@
  * @nfunctions: The numbmer of entries in @functions.
  * @groups: An array describing all pin groups the pin SoC supports.
  * @ngroups: The numbmer of entries in @groups.
+ * @gpio_pingroups: gpio pingroups
+ * @ngpio_pingroups: gpio pingroups count
  *
  * @modes_supported: Does SoC support modes
  * @mode: mode configured from probe
@@ -113,6 +156,10 @@
 	unsigned nfunctions;
 	struct spear_pingroup **groups;
 	unsigned ngroups;
+	struct spear_gpio_pingroup *gpio_pingroups;
+	void (*gpio_request_endisable)(struct spear_pmx *pmx, int offset,
+			bool enable);
+	unsigned ngpio_pingroups;
 
 	bool modes_supported;
 	u16 mode;
@@ -135,7 +182,20 @@
 };
 
 /* exported routines */
+static inline u32 pmx_readl(struct spear_pmx *pmx, u32 reg)
+{
+	return readl_relaxed(pmx->vbase + reg);
+}
+
+static inline void pmx_writel(struct spear_pmx *pmx, u32 val, u32 reg)
+{
+	writel_relaxed(val, pmx->vbase + reg);
+}
+
 void __devinit pmx_init_addr(struct spear_pinctrl_machdata *machdata, u16 reg);
+void __devinit
+pmx_init_gpio_pingroup_addr(struct spear_gpio_pingroup *gpio_pingroup,
+		unsigned count, u16 reg);
 int __devinit spear_pinctrl_probe(struct platform_device *pdev,
 		struct spear_pinctrl_machdata *machdata);
 int spear_pinctrl_remove(struct platform_device *pdev);
diff --git a/drivers/pinctrl/spear/pinctrl-spear1310.c b/drivers/pinctrl/spear/pinctrl-spear1310.c
index 2c624e1..e40d785 100644
--- a/drivers/pinctrl/spear/pinctrl-spear1310.c
+++ b/drivers/pinctrl/spear/pinctrl-spear1310.c
@@ -2418,6 +2418,268 @@
 	&gpt64_function,
 };
 
+static const unsigned pin18[] = { 18, };
+static const unsigned pin19[] = { 19, };
+static const unsigned pin20[] = { 20, };
+static const unsigned pin21[] = { 21, };
+static const unsigned pin22[] = { 22, };
+static const unsigned pin23[] = { 23, };
+static const unsigned pin54[] = { 54, };
+static const unsigned pin55[] = { 55, };
+static const unsigned pin56[] = { 56, };
+static const unsigned pin57[] = { 57, };
+static const unsigned pin58[] = { 58, };
+static const unsigned pin59[] = { 59, };
+static const unsigned pin60[] = { 60, };
+static const unsigned pin61[] = { 61, };
+static const unsigned pin62[] = { 62, };
+static const unsigned pin63[] = { 63, };
+static const unsigned pin143[] = { 143, };
+static const unsigned pin144[] = { 144, };
+static const unsigned pin145[] = { 145, };
+static const unsigned pin146[] = { 146, };
+static const unsigned pin147[] = { 147, };
+static const unsigned pin148[] = { 148, };
+static const unsigned pin149[] = { 149, };
+static const unsigned pin150[] = { 150, };
+static const unsigned pin151[] = { 151, };
+static const unsigned pin152[] = { 152, };
+static const unsigned pin205[] = { 205, };
+static const unsigned pin206[] = { 206, };
+static const unsigned pin211[] = { 211, };
+static const unsigned pin212[] = { 212, };
+static const unsigned pin213[] = { 213, };
+static const unsigned pin214[] = { 214, };
+static const unsigned pin215[] = { 215, };
+static const unsigned pin216[] = { 216, };
+static const unsigned pin217[] = { 217, };
+static const unsigned pin218[] = { 218, };
+static const unsigned pin219[] = { 219, };
+static const unsigned pin220[] = { 220, };
+static const unsigned pin221[] = { 221, };
+static const unsigned pin222[] = { 222, };
+static const unsigned pin223[] = { 223, };
+static const unsigned pin224[] = { 224, };
+static const unsigned pin225[] = { 225, };
+static const unsigned pin226[] = { 226, };
+static const unsigned pin227[] = { 227, };
+static const unsigned pin228[] = { 228, };
+static const unsigned pin229[] = { 229, };
+static const unsigned pin230[] = { 230, };
+static const unsigned pin231[] = { 231, };
+static const unsigned pin232[] = { 232, };
+static const unsigned pin233[] = { 233, };
+static const unsigned pin234[] = { 234, };
+static const unsigned pin235[] = { 235, };
+static const unsigned pin236[] = { 236, };
+static const unsigned pin237[] = { 237, };
+static const unsigned pin238[] = { 238, };
+static const unsigned pin239[] = { 239, };
+static const unsigned pin240[] = { 240, };
+static const unsigned pin241[] = { 241, };
+static const unsigned pin242[] = { 242, };
+static const unsigned pin243[] = { 243, };
+static const unsigned pin244[] = { 244, };
+static const unsigned pin245[] = { 245, };
+
+static const unsigned pin_grp0[] = { 173, 174, };
+static const unsigned pin_grp1[] = { 175, 185, 188, 197, 198, };
+static const unsigned pin_grp2[] = { 176, 177, 178, 179, 184, 186, 187, 189,
+	190, 191, 192, };
+static const unsigned pin_grp3[] = { 180, 181, 182, 183, 193, 194, 195, 196, };
+static const unsigned pin_grp4[] = { 199, 200, };
+static const unsigned pin_grp5[] = { 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74,
+	75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, };
+static const unsigned pin_grp6[] = { 86, 87, 88, 89, 90, 91, 92, 93, };
+static const unsigned pin_grp7[] = { 98, 99, };
+static const unsigned pin_grp8[] = { 158, 159, 160, 161, 162, 163, 164, 165,
+	166, 167, 168, 169, 170, 171, 172, };
+
+/* Define muxreg arrays */
+DEFINE_2_MUXREG(i2c0_pins, PAD_FUNCTION_EN_0, PAD_DIRECTION_SEL_0, PMX_I2C0_MASK, 0, 1);
+DEFINE_2_MUXREG(ssp0_pins, PAD_FUNCTION_EN_0, PAD_DIRECTION_SEL_0, PMX_SSP0_MASK, 0, 1);
+DEFINE_2_MUXREG(ssp0_cs0_pins, PAD_FUNCTION_EN_2, PAD_DIRECTION_SEL_2, PMX_SSP0_CS0_MASK, 0, 1);
+DEFINE_2_MUXREG(ssp0_cs1_2_pins, PAD_FUNCTION_EN_2, PAD_DIRECTION_SEL_2, PMX_SSP0_CS1_2_MASK, 0, 1);
+DEFINE_2_MUXREG(i2s0_pins, PAD_FUNCTION_EN_0, PAD_DIRECTION_SEL_0, PMX_I2S0_MASK, 0, 1);
+DEFINE_2_MUXREG(i2s1_pins, PAD_FUNCTION_EN_1, PAD_DIRECTION_SEL_1, PMX_I2S1_MASK, 0, 1);
+DEFINE_2_MUXREG(clcd_pins, PAD_FUNCTION_EN_0, PAD_DIRECTION_SEL_0, PMX_CLCD1_MASK, 0, 1);
+DEFINE_2_MUXREG(clcd_high_res_pins, PAD_FUNCTION_EN_1, PAD_DIRECTION_SEL_1, PMX_CLCD2_MASK, 0, 1);
+DEFINE_2_MUXREG(pin18, PAD_FUNCTION_EN_0, PAD_DIRECTION_SEL_0, PMX_EGPIO15_MASK, 0, 1);
+DEFINE_2_MUXREG(pin19, PAD_FUNCTION_EN_0, PAD_DIRECTION_SEL_0, PMX_EGPIO14_MASK, 0, 1);
+DEFINE_2_MUXREG(pin20, PAD_FUNCTION_EN_0, PAD_DIRECTION_SEL_0, PMX_EGPIO13_MASK, 0, 1);
+DEFINE_2_MUXREG(pin21, PAD_FUNCTION_EN_0, PAD_DIRECTION_SEL_0, PMX_EGPIO12_MASK, 0, 1);
+DEFINE_2_MUXREG(pin22, PAD_FUNCTION_EN_0, PAD_DIRECTION_SEL_0, PMX_EGPIO11_MASK, 0, 1);
+DEFINE_2_MUXREG(pin23, PAD_FUNCTION_EN_0, PAD_DIRECTION_SEL_0, PMX_EGPIO10_MASK, 0, 1);
+DEFINE_2_MUXREG(pin143, PAD_FUNCTION_EN_0, PAD_DIRECTION_SEL_0, PMX_EGPIO00_MASK, 0, 1);
+DEFINE_2_MUXREG(pin144, PAD_FUNCTION_EN_0, PAD_DIRECTION_SEL_0, PMX_EGPIO01_MASK, 0, 1);
+DEFINE_2_MUXREG(pin145, PAD_FUNCTION_EN_0, PAD_DIRECTION_SEL_0, PMX_EGPIO02_MASK, 0, 1);
+DEFINE_2_MUXREG(pin146, PAD_FUNCTION_EN_0, PAD_DIRECTION_SEL_0, PMX_EGPIO03_MASK, 0, 1);
+DEFINE_2_MUXREG(pin147, PAD_FUNCTION_EN_0, PAD_DIRECTION_SEL_0, PMX_EGPIO04_MASK, 0, 1);
+DEFINE_2_MUXREG(pin148, PAD_FUNCTION_EN_0, PAD_DIRECTION_SEL_0, PMX_EGPIO05_MASK, 0, 1);
+DEFINE_2_MUXREG(pin149, PAD_FUNCTION_EN_0, PAD_DIRECTION_SEL_0, PMX_EGPIO06_MASK, 0, 1);
+DEFINE_2_MUXREG(pin150, PAD_FUNCTION_EN_0, PAD_DIRECTION_SEL_0, PMX_EGPIO07_MASK, 0, 1);
+DEFINE_2_MUXREG(pin151, PAD_FUNCTION_EN_0, PAD_DIRECTION_SEL_0, PMX_EGPIO08_MASK, 0, 1);
+DEFINE_2_MUXREG(pin152, PAD_FUNCTION_EN_0, PAD_DIRECTION_SEL_0, PMX_EGPIO09_MASK, 0, 1);
+DEFINE_2_MUXREG(smi_2_chips_pins, PAD_FUNCTION_EN_0, PAD_DIRECTION_SEL_0, PMX_SMI_MASK, 0, 1);
+DEFINE_2_MUXREG(pin54, PAD_FUNCTION_EN_1, PAD_DIRECTION_SEL_1, PMX_SMINCS3_MASK, 0, 1);
+DEFINE_2_MUXREG(pin55, PAD_FUNCTION_EN_1, PAD_DIRECTION_SEL_1, PMX_SMINCS2_MASK, 0, 1);
+DEFINE_2_MUXREG(pin56, PAD_FUNCTION_EN_1, PAD_DIRECTION_SEL_1, PMX_NFRSTPWDWN3_MASK, 0, 1);
+DEFINE_2_MUXREG(pin57, PAD_FUNCTION_EN_0, PAD_DIRECTION_SEL_0, PMX_NFRSTPWDWN2_MASK, 0, 1);
+DEFINE_2_MUXREG(pin58, PAD_FUNCTION_EN_0, PAD_DIRECTION_SEL_0, PMX_NFRSTPWDWN1_MASK, 0, 1);
+DEFINE_2_MUXREG(pin59, PAD_FUNCTION_EN_0, PAD_DIRECTION_SEL_0, PMX_NFRSTPWDWN0_MASK, 0, 1);
+DEFINE_2_MUXREG(pin60, PAD_FUNCTION_EN_0, PAD_DIRECTION_SEL_0, PMX_NFWPRT3_MASK, 0, 1);
+DEFINE_2_MUXREG(pin61, PAD_FUNCTION_EN_0, PAD_DIRECTION_SEL_0, PMX_NFCE3_MASK, 0, 1);
+DEFINE_2_MUXREG(pin62, PAD_FUNCTION_EN_0, PAD_DIRECTION_SEL_0, PMX_NFAD25_MASK, 0, 1);
+DEFINE_2_MUXREG(pin63, PAD_FUNCTION_EN_0, PAD_DIRECTION_SEL_0, PMX_NFAD24_MASK, 0, 1);
+DEFINE_2_MUXREG(pin_grp0, PAD_FUNCTION_EN_0, PAD_DIRECTION_SEL_0, PMX_GMIICLK_MASK, 0, 1);
+DEFINE_2_MUXREG(pin_grp1, PAD_FUNCTION_EN_0, PAD_DIRECTION_SEL_0, PMX_GMIICOL_CRS_XFERER_MIITXCLK_MASK, 0, 1);
+DEFINE_2_MUXREG(pin_grp2, PAD_FUNCTION_EN_0, PAD_DIRECTION_SEL_0, PMX_RXCLK_RDV_TXEN_D03_MASK, 0, 1);
+DEFINE_2_MUXREG(pin_grp3, PAD_FUNCTION_EN_0, PAD_DIRECTION_SEL_0, PMX_GMIID47_MASK, 0, 1);
+DEFINE_2_MUXREG(pin_grp4, PAD_FUNCTION_EN_0, PAD_DIRECTION_SEL_0, PMX_MDC_MDIO_MASK, 0, 1);
+DEFINE_2_MUXREG(pin_grp5, PAD_FUNCTION_EN_0, PAD_DIRECTION_SEL_0, PMX_NFAD23_MASK, 0, 1);
+DEFINE_2_MUXREG(pin_grp6, PAD_FUNCTION_EN_0, PAD_DIRECTION_SEL_0, PMX_MCI_DATA8_15_MASK, 0, 1);
+DEFINE_2_MUXREG(pin_grp7, PAD_FUNCTION_EN_1, PAD_DIRECTION_SEL_1, PMX_NFCE2_MASK, 0, 1);
+DEFINE_2_MUXREG(pin_grp8, PAD_FUNCTION_EN_1, PAD_DIRECTION_SEL_1, PMX_NAND8_MASK, 0, 1);
+DEFINE_2_MUXREG(nand_16bit_pins, PAD_FUNCTION_EN_1, PAD_DIRECTION_SEL_1, PMX_NAND16BIT_1_MASK, 0, 1);
+DEFINE_2_MUXREG(pin205, PAD_FUNCTION_EN_1, PAD_DIRECTION_SEL_1, PMX_KBD_COL1_MASK | PMX_NFCE1_MASK, 0, 1);
+DEFINE_2_MUXREG(pin206, PAD_FUNCTION_EN_1, PAD_DIRECTION_SEL_1, PMX_KBD_COL0_MASK | PMX_NFCE2_MASK, 0, 1);
+DEFINE_2_MUXREG(pin211, PAD_FUNCTION_EN_1, PAD_DIRECTION_SEL_1, PMX_KBD_ROW1_MASK | PMX_NFWPRT1_MASK, 0, 1);
+DEFINE_2_MUXREG(pin212, PAD_FUNCTION_EN_1, PAD_DIRECTION_SEL_1, PMX_KBD_ROW0_MASK | PMX_NFWPRT2_MASK, 0, 1);
+DEFINE_2_MUXREG(pin213, PAD_FUNCTION_EN_1, PAD_DIRECTION_SEL_1, PMX_MCIDATA0_MASK, 0, 1);
+DEFINE_2_MUXREG(pin214, PAD_FUNCTION_EN_1, PAD_DIRECTION_SEL_1, PMX_MCIDATA1_MASK, 0, 1);
+DEFINE_2_MUXREG(pin215, PAD_FUNCTION_EN_1, PAD_DIRECTION_SEL_1, PMX_MCIDATA2_MASK, 0, 1);
+DEFINE_2_MUXREG(pin216, PAD_FUNCTION_EN_1, PAD_DIRECTION_SEL_1, PMX_MCIDATA3_MASK, 0, 1);
+DEFINE_2_MUXREG(pin217, PAD_FUNCTION_EN_1, PAD_DIRECTION_SEL_1, PMX_MCIDATA4_MASK, 0, 1);
+DEFINE_2_MUXREG(pin218, PAD_FUNCTION_EN_2, PAD_DIRECTION_SEL_2, PMX_MCIDATA5_MASK, 0, 1);
+DEFINE_2_MUXREG(pin219, PAD_FUNCTION_EN_2, PAD_DIRECTION_SEL_2, PMX_MCIDATA6_MASK, 0, 1);
+DEFINE_2_MUXREG(pin220, PAD_FUNCTION_EN_2, PAD_DIRECTION_SEL_2, PMX_MCIDATA7_MASK, 0, 1);
+DEFINE_2_MUXREG(pin221, PAD_FUNCTION_EN_2, PAD_DIRECTION_SEL_2, PMX_MCIDATA1SD_MASK, 0, 1);
+DEFINE_2_MUXREG(pin222, PAD_FUNCTION_EN_2, PAD_DIRECTION_SEL_2, PMX_MCIDATA2SD_MASK, 0, 1);
+DEFINE_2_MUXREG(pin223, PAD_FUNCTION_EN_2, PAD_DIRECTION_SEL_2, PMX_MCIDATA3SD_MASK, 0, 1);
+DEFINE_2_MUXREG(pin224, PAD_FUNCTION_EN_2, PAD_DIRECTION_SEL_2, PMX_MCIADDR0ALE_MASK, 0, 1);
+DEFINE_2_MUXREG(pin225, PAD_FUNCTION_EN_2, PAD_DIRECTION_SEL_2, PMX_MCIADDR1CLECLK_MASK, 0, 1);
+DEFINE_2_MUXREG(pin226, PAD_FUNCTION_EN_2, PAD_DIRECTION_SEL_2, PMX_MCIADDR2_MASK, 0, 1);
+DEFINE_2_MUXREG(pin227, PAD_FUNCTION_EN_2, PAD_DIRECTION_SEL_2, PMX_MCICECF_MASK, 0, 1);
+DEFINE_2_MUXREG(pin228, PAD_FUNCTION_EN_2, PAD_DIRECTION_SEL_2, PMX_MCICEXD_MASK, 0, 1);
+DEFINE_2_MUXREG(pin229, PAD_FUNCTION_EN_2, PAD_DIRECTION_SEL_2, PMX_MCICESDMMC_MASK, 0, 1);
+DEFINE_2_MUXREG(pin230, PAD_FUNCTION_EN_2, PAD_DIRECTION_SEL_2, PMX_MCICDCF1_MASK, 0, 1);
+DEFINE_2_MUXREG(pin231, PAD_FUNCTION_EN_2, PAD_DIRECTION_SEL_2, PMX_MCICDCF2_MASK, 0, 1);
+DEFINE_2_MUXREG(pin232, PAD_FUNCTION_EN_2, PAD_DIRECTION_SEL_2, PMX_MCICDXD_MASK, 0, 1);
+DEFINE_2_MUXREG(pin233, PAD_FUNCTION_EN_2, PAD_DIRECTION_SEL_2, PMX_MCICDSDMMC_MASK, 0, 1);
+DEFINE_2_MUXREG(pin234, PAD_FUNCTION_EN_2, PAD_DIRECTION_SEL_2, PMX_MCIDATADIR_MASK, 0, 1);
+DEFINE_2_MUXREG(pin235, PAD_FUNCTION_EN_2, PAD_DIRECTION_SEL_2, PMX_MCIDMARQWP_MASK, 0, 1);
+DEFINE_2_MUXREG(pin236, PAD_FUNCTION_EN_2, PAD_DIRECTION_SEL_2, PMX_MCIIORDRE_MASK, 0, 1);
+DEFINE_2_MUXREG(pin237, PAD_FUNCTION_EN_2, PAD_DIRECTION_SEL_2, PMX_MCIIOWRWE_MASK, 0, 1);
+DEFINE_2_MUXREG(pin238, PAD_FUNCTION_EN_2, PAD_DIRECTION_SEL_2, PMX_MCIRESETCF_MASK, 0, 1);
+DEFINE_2_MUXREG(pin239, PAD_FUNCTION_EN_2, PAD_DIRECTION_SEL_2, PMX_MCICS0CE_MASK, 0, 1);
+DEFINE_2_MUXREG(pin240, PAD_FUNCTION_EN_2, PAD_DIRECTION_SEL_2, PMX_MCICFINTR_MASK, 0, 1);
+DEFINE_2_MUXREG(pin241, PAD_FUNCTION_EN_2, PAD_DIRECTION_SEL_2, PMX_MCIIORDY_MASK, 0, 1);
+DEFINE_2_MUXREG(pin242, PAD_FUNCTION_EN_2, PAD_DIRECTION_SEL_2, PMX_MCICS1_MASK, 0, 1);
+DEFINE_2_MUXREG(pin243, PAD_FUNCTION_EN_2, PAD_DIRECTION_SEL_2, PMX_MCIDMAACK_MASK, 0, 1);
+DEFINE_2_MUXREG(pin244, PAD_FUNCTION_EN_2, PAD_DIRECTION_SEL_2, PMX_MCISDCMD_MASK, 0, 1);
+DEFINE_2_MUXREG(pin245, PAD_FUNCTION_EN_2, PAD_DIRECTION_SEL_2, PMX_MCILEDS_MASK, 0, 1);
+DEFINE_2_MUXREG(keyboard_rowcol6_8_pins, PAD_FUNCTION_EN_1, PAD_DIRECTION_SEL_1, PMX_KBD_ROWCOL68_MASK, 0, 1);
+DEFINE_2_MUXREG(uart0_pins, PAD_FUNCTION_EN_0, PAD_DIRECTION_SEL_0, PMX_UART0_MASK, 0, 1);
+DEFINE_2_MUXREG(uart0_modem_pins, PAD_FUNCTION_EN_1, PAD_DIRECTION_SEL_1, PMX_UART0_MODEM_MASK, 0, 1);
+DEFINE_2_MUXREG(gpt0_tmr0_pins, PAD_FUNCTION_EN_1, PAD_DIRECTION_SEL_1, PMX_GPT0_TMR0_MASK, 0, 1);
+DEFINE_2_MUXREG(gpt0_tmr1_pins, PAD_FUNCTION_EN_1, PAD_DIRECTION_SEL_1, PMX_GPT0_TMR1_MASK, 0, 1);
+DEFINE_2_MUXREG(gpt1_tmr0_pins, PAD_FUNCTION_EN_1, PAD_DIRECTION_SEL_1, PMX_GPT1_TMR0_MASK, 0, 1);
+DEFINE_2_MUXREG(gpt1_tmr1_pins, PAD_FUNCTION_EN_1, PAD_DIRECTION_SEL_1, PMX_GPT1_TMR1_MASK, 0, 1);
+DEFINE_2_MUXREG(touch_xy_pins, PAD_FUNCTION_EN_1, PAD_DIRECTION_SEL_1, PMX_TOUCH_XY_MASK, 0, 1);
+
+static struct spear_gpio_pingroup spear1310_gpio_pingroup[] = {
+	GPIO_PINGROUP(i2c0_pins),
+	GPIO_PINGROUP(ssp0_pins),
+	GPIO_PINGROUP(ssp0_cs0_pins),
+	GPIO_PINGROUP(ssp0_cs1_2_pins),
+	GPIO_PINGROUP(i2s0_pins),
+	GPIO_PINGROUP(i2s1_pins),
+	GPIO_PINGROUP(clcd_pins),
+	GPIO_PINGROUP(clcd_high_res_pins),
+	GPIO_PINGROUP(pin18),
+	GPIO_PINGROUP(pin19),
+	GPIO_PINGROUP(pin20),
+	GPIO_PINGROUP(pin21),
+	GPIO_PINGROUP(pin22),
+	GPIO_PINGROUP(pin23),
+	GPIO_PINGROUP(pin143),
+	GPIO_PINGROUP(pin144),
+	GPIO_PINGROUP(pin145),
+	GPIO_PINGROUP(pin146),
+	GPIO_PINGROUP(pin147),
+	GPIO_PINGROUP(pin148),
+	GPIO_PINGROUP(pin149),
+	GPIO_PINGROUP(pin150),
+	GPIO_PINGROUP(pin151),
+	GPIO_PINGROUP(pin152),
+	GPIO_PINGROUP(smi_2_chips_pins),
+	GPIO_PINGROUP(pin54),
+	GPIO_PINGROUP(pin55),
+	GPIO_PINGROUP(pin56),
+	GPIO_PINGROUP(pin57),
+	GPIO_PINGROUP(pin58),
+	GPIO_PINGROUP(pin59),
+	GPIO_PINGROUP(pin60),
+	GPIO_PINGROUP(pin61),
+	GPIO_PINGROUP(pin62),
+	GPIO_PINGROUP(pin63),
+	GPIO_PINGROUP(pin_grp0),
+	GPIO_PINGROUP(pin_grp1),
+	GPIO_PINGROUP(pin_grp2),
+	GPIO_PINGROUP(pin_grp3),
+	GPIO_PINGROUP(pin_grp4),
+	GPIO_PINGROUP(pin_grp5),
+	GPIO_PINGROUP(pin_grp6),
+	GPIO_PINGROUP(pin_grp7),
+	GPIO_PINGROUP(pin_grp8),
+	GPIO_PINGROUP(nand_16bit_pins),
+	GPIO_PINGROUP(pin205),
+	GPIO_PINGROUP(pin206),
+	GPIO_PINGROUP(pin211),
+	GPIO_PINGROUP(pin212),
+	GPIO_PINGROUP(pin213),
+	GPIO_PINGROUP(pin214),
+	GPIO_PINGROUP(pin215),
+	GPIO_PINGROUP(pin216),
+	GPIO_PINGROUP(pin217),
+	GPIO_PINGROUP(pin218),
+	GPIO_PINGROUP(pin219),
+	GPIO_PINGROUP(pin220),
+	GPIO_PINGROUP(pin221),
+	GPIO_PINGROUP(pin222),
+	GPIO_PINGROUP(pin223),
+	GPIO_PINGROUP(pin224),
+	GPIO_PINGROUP(pin225),
+	GPIO_PINGROUP(pin226),
+	GPIO_PINGROUP(pin227),
+	GPIO_PINGROUP(pin228),
+	GPIO_PINGROUP(pin229),
+	GPIO_PINGROUP(pin230),
+	GPIO_PINGROUP(pin231),
+	GPIO_PINGROUP(pin232),
+	GPIO_PINGROUP(pin233),
+	GPIO_PINGROUP(pin234),
+	GPIO_PINGROUP(pin235),
+	GPIO_PINGROUP(pin236),
+	GPIO_PINGROUP(pin237),
+	GPIO_PINGROUP(pin238),
+	GPIO_PINGROUP(pin239),
+	GPIO_PINGROUP(pin240),
+	GPIO_PINGROUP(pin241),
+	GPIO_PINGROUP(pin242),
+	GPIO_PINGROUP(pin243),
+	GPIO_PINGROUP(pin244),
+	GPIO_PINGROUP(pin245),
+	GPIO_PINGROUP(keyboard_rowcol6_8_pins),
+	GPIO_PINGROUP(uart0_pins),
+	GPIO_PINGROUP(uart0_modem_pins),
+	GPIO_PINGROUP(gpt0_tmr0_pins),
+	GPIO_PINGROUP(gpt0_tmr1_pins),
+	GPIO_PINGROUP(gpt1_tmr0_pins),
+	GPIO_PINGROUP(gpt1_tmr1_pins),
+	GPIO_PINGROUP(touch_xy_pins),
+};
+
 static struct spear_pinctrl_machdata spear1310_machdata = {
 	.pins = spear1310_pins,
 	.npins = ARRAY_SIZE(spear1310_pins),
@@ -2425,6 +2687,8 @@
 	.ngroups = ARRAY_SIZE(spear1310_pingroups),
 	.functions = spear1310_functions,
 	.nfunctions = ARRAY_SIZE(spear1310_functions),
+	.gpio_pingroups = spear1310_gpio_pingroup,
+	.ngpio_pingroups = ARRAY_SIZE(spear1310_gpio_pingroup),
 	.modes_supported = false,
 };
 
diff --git a/drivers/pinctrl/spear/pinctrl-spear1340.c b/drivers/pinctrl/spear/pinctrl-spear1340.c
index ed6c256..8deaaff 100644
--- a/drivers/pinctrl/spear/pinctrl-spear1340.c
+++ b/drivers/pinctrl/spear/pinctrl-spear1340.c
@@ -1971,6 +1971,32 @@
 	&sata_function,
 };
 
+static void gpio_request_endisable(struct spear_pmx *pmx, int pin,
+		bool enable)
+{
+	unsigned int regoffset, regindex, bitoffset;
+	unsigned int val;
+
+	/* pin++ as gpio configuration starts from 2nd bit of base register */
+	pin++;
+
+	regindex = pin / 32;
+	bitoffset = pin % 32;
+
+	if (regindex <= 3)
+		regoffset = PAD_FUNCTION_EN_1 + regindex * sizeof(int *);
+	else
+		regoffset = PAD_FUNCTION_EN_5 + (regindex - 4) * sizeof(int *);
+
+	val = pmx_readl(pmx, regoffset);
+	if (enable)
+		val &= ~(0x1 << bitoffset);
+	else
+		val |= 0x1 << bitoffset;
+
+	pmx_writel(pmx, val, regoffset);
+}
+
 static struct spear_pinctrl_machdata spear1340_machdata = {
 	.pins = spear1340_pins,
 	.npins = ARRAY_SIZE(spear1340_pins),
@@ -1978,6 +2004,7 @@
 	.ngroups = ARRAY_SIZE(spear1340_pingroups),
 	.functions = spear1340_functions,
 	.nfunctions = ARRAY_SIZE(spear1340_functions),
+	.gpio_request_endisable = gpio_request_endisable,
 	.modes_supported = false,
 };
 
diff --git a/drivers/pinctrl/spear/pinctrl-spear300.c b/drivers/pinctrl/spear/pinctrl-spear300.c
index efe29c6..f48e466e 100644
--- a/drivers/pinctrl/spear/pinctrl-spear300.c
+++ b/drivers/pinctrl/spear/pinctrl-spear300.c
@@ -661,6 +661,8 @@
 	spear3xx_machdata.ngroups = ARRAY_SIZE(spear300_pingroups);
 	spear3xx_machdata.functions = spear300_functions;
 	spear3xx_machdata.nfunctions = ARRAY_SIZE(spear300_functions);
+	spear3xx_machdata.gpio_pingroups = NULL;
+	spear3xx_machdata.ngpio_pingroups = 0;
 
 	spear3xx_machdata.modes_supported = true;
 	spear3xx_machdata.pmx_modes = spear300_pmx_modes;
diff --git a/drivers/pinctrl/spear/pinctrl-spear310.c b/drivers/pinctrl/spear/pinctrl-spear310.c
index d8b1fde..5b954c1 100644
--- a/drivers/pinctrl/spear/pinctrl-spear310.c
+++ b/drivers/pinctrl/spear/pinctrl-spear310.c
@@ -388,6 +388,8 @@
 	spear3xx_machdata.nfunctions = ARRAY_SIZE(spear310_functions);
 
 	pmx_init_addr(&spear3xx_machdata, PMX_CONFIG_REG);
+	pmx_init_gpio_pingroup_addr(spear3xx_machdata.gpio_pingroups,
+			spear3xx_machdata.ngpio_pingroups, PMX_CONFIG_REG);
 
 	spear3xx_machdata.modes_supported = false;
 
diff --git a/drivers/pinctrl/spear/pinctrl-spear320.c b/drivers/pinctrl/spear/pinctrl-spear320.c
index dd7fcaf..e9a5e6d 100644
--- a/drivers/pinctrl/spear/pinctrl-spear320.c
+++ b/drivers/pinctrl/spear/pinctrl-spear320.c
@@ -3431,6 +3431,8 @@
 	spear3xx_machdata.npmx_modes = ARRAY_SIZE(spear320_pmx_modes);
 
 	pmx_init_addr(&spear3xx_machdata, PMX_CONFIG_REG);
+	pmx_init_gpio_pingroup_addr(spear3xx_machdata.gpio_pingroups,
+			spear3xx_machdata.ngpio_pingroups, PMX_CONFIG_REG);
 
 	ret = spear_pinctrl_probe(pdev, &spear3xx_machdata);
 	if (ret)
diff --git a/drivers/pinctrl/spear/pinctrl-spear3xx.c b/drivers/pinctrl/spear/pinctrl-spear3xx.c
index 0242378..12ee21a 100644
--- a/drivers/pinctrl/spear/pinctrl-spear3xx.c
+++ b/drivers/pinctrl/spear/pinctrl-spear3xx.c
@@ -481,7 +481,44 @@
 	.ngroups = ARRAY_SIZE(timer_2_3_grps),
 };
 
+/* Define muxreg arrays */
+DEFINE_MUXREG(firda_pins, 0, PMX_FIRDA_MASK, 0);
+DEFINE_MUXREG(i2c_pins, 0, PMX_I2C_MASK, 0);
+DEFINE_MUXREG(ssp_cs_pins, 0, PMX_SSP_CS_MASK, 0);
+DEFINE_MUXREG(ssp_pins, 0, PMX_SSP_MASK, 0);
+DEFINE_MUXREG(mii_pins, 0, PMX_MII_MASK, 0);
+DEFINE_MUXREG(gpio0_pin0_pins, 0, PMX_GPIO_PIN0_MASK, 0);
+DEFINE_MUXREG(gpio0_pin1_pins, 0, PMX_GPIO_PIN1_MASK, 0);
+DEFINE_MUXREG(gpio0_pin2_pins, 0, PMX_GPIO_PIN2_MASK, 0);
+DEFINE_MUXREG(gpio0_pin3_pins, 0, PMX_GPIO_PIN3_MASK, 0);
+DEFINE_MUXREG(gpio0_pin4_pins, 0, PMX_GPIO_PIN4_MASK, 0);
+DEFINE_MUXREG(gpio0_pin5_pins, 0, PMX_GPIO_PIN5_MASK, 0);
+DEFINE_MUXREG(uart0_ext_pins, 0, PMX_UART0_MODEM_MASK, 0);
+DEFINE_MUXREG(uart0_pins, 0, PMX_UART0_MASK, 0);
+DEFINE_MUXREG(timer_0_1_pins, 0, PMX_TIMER_0_1_MASK, 0);
+DEFINE_MUXREG(timer_2_3_pins, 0, PMX_TIMER_2_3_MASK, 0);
+
+static struct spear_gpio_pingroup spear3xx_gpio_pingroup[] = {
+	GPIO_PINGROUP(firda_pins),
+	GPIO_PINGROUP(i2c_pins),
+	GPIO_PINGROUP(ssp_cs_pins),
+	GPIO_PINGROUP(ssp_pins),
+	GPIO_PINGROUP(mii_pins),
+	GPIO_PINGROUP(gpio0_pin0_pins),
+	GPIO_PINGROUP(gpio0_pin1_pins),
+	GPIO_PINGROUP(gpio0_pin2_pins),
+	GPIO_PINGROUP(gpio0_pin3_pins),
+	GPIO_PINGROUP(gpio0_pin4_pins),
+	GPIO_PINGROUP(gpio0_pin5_pins),
+	GPIO_PINGROUP(uart0_ext_pins),
+	GPIO_PINGROUP(uart0_pins),
+	GPIO_PINGROUP(timer_0_1_pins),
+	GPIO_PINGROUP(timer_2_3_pins),
+};
+
 struct spear_pinctrl_machdata spear3xx_machdata = {
 	.pins = spear3xx_pins,
 	.npins = ARRAY_SIZE(spear3xx_pins),
+	.gpio_pingroups = spear3xx_gpio_pingroup,
+	.ngpio_pingroups = ARRAY_SIZE(spear3xx_gpio_pingroup),
 };
diff --git a/drivers/pnp/base.h b/drivers/pnp/base.h
index fa4e0a5..ffd53e3 100644
--- a/drivers/pnp/base.h
+++ b/drivers/pnp/base.h
@@ -159,6 +159,8 @@
 
 void pnp_free_resource(struct pnp_resource *pnp_res);
 
+struct pnp_resource *pnp_add_resource(struct pnp_dev *dev,
+				      struct resource *res);
 struct pnp_resource *pnp_add_irq_resource(struct pnp_dev *dev, int irq,
 					  int flags);
 struct pnp_resource *pnp_add_dma_resource(struct pnp_dev *dev, int dma,
diff --git a/drivers/pnp/pnpacpi/core.c b/drivers/pnp/pnpacpi/core.c
index 26b5d4b..72e822e 100644
--- a/drivers/pnp/pnpacpi/core.c
+++ b/drivers/pnp/pnpacpi/core.c
@@ -58,7 +58,7 @@
 	if (!(('0' <= (c) && (c) <= '9') || ('A' <= (c) && (c) <= 'F'))) \
 		return 0
 #define TEST_ALPHA(c) \
-	if (!('@' <= (c) || (c) <= 'Z')) \
+	if (!('A' <= (c) && (c) <= 'Z')) \
 		return 0
 static int __init ispnpidacpi(const char *id)
 {
@@ -95,6 +95,9 @@
 		return -ENODEV;
 	}
 
+	if (WARN_ON_ONCE(acpi_dev != dev->data))
+		dev->data = acpi_dev;
+
 	ret = pnpacpi_build_resource_template(dev, &buffer);
 	if (ret)
 		return ret;
@@ -242,6 +245,10 @@
 	char *pnpid;
 	struct acpi_hardware_id *id;
 
+	/* Skip devices that are already bound */
+	if (device->physical_node_count)
+		return 0;
+
 	/*
 	 * If a PnPacpi device is not present , the device
 	 * driver should not be loaded.
diff --git a/drivers/pnp/pnpacpi/rsparser.c b/drivers/pnp/pnpacpi/rsparser.c
index 5be4a39..b8f4ea7 100644
--- a/drivers/pnp/pnpacpi/rsparser.c
+++ b/drivers/pnp/pnpacpi/rsparser.c
@@ -28,37 +28,6 @@
 #include "../base.h"
 #include "pnpacpi.h"
 
-#ifdef CONFIG_IA64
-#define valid_IRQ(i) (1)
-#else
-#define valid_IRQ(i) (((i) != 0) && ((i) != 2))
-#endif
-
-/*
- * Allocated Resources
- */
-static int irq_flags(int triggering, int polarity, int shareable)
-{
-	int flags;
-
-	if (triggering == ACPI_LEVEL_SENSITIVE) {
-		if (polarity == ACPI_ACTIVE_LOW)
-			flags = IORESOURCE_IRQ_LOWLEVEL;
-		else
-			flags = IORESOURCE_IRQ_HIGHLEVEL;
-	} else {
-		if (polarity == ACPI_ACTIVE_LOW)
-			flags = IORESOURCE_IRQ_LOWEDGE;
-		else
-			flags = IORESOURCE_IRQ_HIGHEDGE;
-	}
-
-	if (shareable == ACPI_SHARED)
-		flags |= IORESOURCE_IRQ_SHAREABLE;
-
-	return flags;
-}
-
 static void decode_irq_flags(struct pnp_dev *dev, int flags, int *triggering,
 			     int *polarity, int *shareable)
 {
@@ -94,45 +63,6 @@
 		*shareable = ACPI_EXCLUSIVE;
 }
 
-static void pnpacpi_parse_allocated_irqresource(struct pnp_dev *dev,
-						u32 gsi, int triggering,
-						int polarity, int shareable)
-{
-	int irq, flags;
-	int p, t;
-
-	if (!valid_IRQ(gsi)) {
-		pnp_add_irq_resource(dev, gsi, IORESOURCE_DISABLED);
-		return;
-	}
-
-	/*
-	 * in IO-APIC mode, use overrided attribute. Two reasons:
-	 * 1. BIOS bug in DSDT
-	 * 2. BIOS uses IO-APIC mode Interrupt Source Override
-	 */
-	if (!acpi_get_override_irq(gsi, &t, &p)) {
-		t = t ? ACPI_LEVEL_SENSITIVE : ACPI_EDGE_SENSITIVE;
-		p = p ? ACPI_ACTIVE_LOW : ACPI_ACTIVE_HIGH;
-
-		if (triggering != t || polarity != p) {
-			dev_warn(&dev->dev, "IRQ %d override to %s, %s\n",
-				gsi, t ? "edge":"level", p ? "low":"high");
-			triggering = t;
-			polarity = p;
-		}
-	}
-
-	flags = irq_flags(triggering, polarity, shareable);
-	irq = acpi_register_gsi(&dev->dev, gsi, triggering, polarity);
-	if (irq >= 0)
-		pcibios_penalize_isa_irq(irq, 1);
-	else
-		flags |= IORESOURCE_DISABLED;
-
-	pnp_add_irq_resource(dev, irq, flags);
-}
-
 static int dma_flags(struct pnp_dev *dev, int type, int bus_master,
 		     int transfer)
 {
@@ -177,21 +107,16 @@
 	return flags;
 }
 
-static void pnpacpi_parse_allocated_ioresource(struct pnp_dev *dev, u64 start,
-					       u64 len, int io_decode,
-					       int window)
+/*
+ * Allocated Resources
+ */
+
+static void pnpacpi_add_irqresource(struct pnp_dev *dev, struct resource *r)
 {
-	int flags = 0;
-	u64 end = start + len - 1;
+	if (!(r->flags & IORESOURCE_DISABLED))
+		pcibios_penalize_isa_irq(r->start, 1);
 
-	if (io_decode == ACPI_DECODE_16)
-		flags |= IORESOURCE_IO_16BIT_ADDR;
-	if (len == 0 || end >= 0x10003)
-		flags |= IORESOURCE_DISABLED;
-	if (window)
-		flags |= IORESOURCE_WINDOW;
-
-	pnp_add_io_resource(dev, start, end, flags);
+	pnp_add_resource(dev, r);
 }
 
 /*
@@ -249,130 +174,49 @@
 	}
 }
 
-static void pnpacpi_parse_allocated_memresource(struct pnp_dev *dev,
-						u64 start, u64 len,
-						int write_protect, int window)
-{
-	int flags = 0;
-	u64 end = start + len - 1;
-
-	if (len == 0)
-		flags |= IORESOURCE_DISABLED;
-	if (write_protect == ACPI_READ_WRITE_MEMORY)
-		flags |= IORESOURCE_MEM_WRITEABLE;
-	if (window)
-		flags |= IORESOURCE_WINDOW;
-
-	pnp_add_mem_resource(dev, start, end, flags);
-}
-
-static void pnpacpi_parse_allocated_busresource(struct pnp_dev *dev,
-						u64 start, u64 len)
-{
-	u64 end = start + len - 1;
-
-	pnp_add_bus_resource(dev, start, end);
-}
-
-static void pnpacpi_parse_allocated_address_space(struct pnp_dev *dev,
-						  struct acpi_resource *res)
-{
-	struct acpi_resource_address64 addr, *p = &addr;
-	acpi_status status;
-	int window;
-	u64 len;
-
-	status = acpi_resource_to_address64(res, p);
-	if (!ACPI_SUCCESS(status)) {
-		dev_warn(&dev->dev, "failed to convert resource type %d\n",
-			 res->type);
-		return;
-	}
-
-	/* Windows apparently computes length rather than using _LEN */
-	len = p->maximum - p->minimum + 1;
-	window = (p->producer_consumer == ACPI_PRODUCER) ? 1 : 0;
-
-	if (p->resource_type == ACPI_MEMORY_RANGE)
-		pnpacpi_parse_allocated_memresource(dev, p->minimum, len,
-			p->info.mem.write_protect, window);
-	else if (p->resource_type == ACPI_IO_RANGE)
-		pnpacpi_parse_allocated_ioresource(dev, p->minimum, len,
-			p->granularity == 0xfff ? ACPI_DECODE_10 :
-				ACPI_DECODE_16, window);
-	else if (p->resource_type == ACPI_BUS_NUMBER_RANGE)
-		pnpacpi_parse_allocated_busresource(dev, p->minimum, len);
-}
-
-static void pnpacpi_parse_allocated_ext_address_space(struct pnp_dev *dev,
-						      struct acpi_resource *res)
-{
-	struct acpi_resource_extended_address64 *p = &res->data.ext_address64;
-	int window;
-	u64 len;
-
-	/* Windows apparently computes length rather than using _LEN */
-	len = p->maximum - p->minimum + 1;
-	window = (p->producer_consumer == ACPI_PRODUCER) ? 1 : 0;
-
-	if (p->resource_type == ACPI_MEMORY_RANGE)
-		pnpacpi_parse_allocated_memresource(dev, p->minimum, len,
-			p->info.mem.write_protect, window);
-	else if (p->resource_type == ACPI_IO_RANGE)
-		pnpacpi_parse_allocated_ioresource(dev, p->minimum, len,
-			p->granularity == 0xfff ? ACPI_DECODE_10 :
-				ACPI_DECODE_16, window);
-	else if (p->resource_type == ACPI_BUS_NUMBER_RANGE)
-		pnpacpi_parse_allocated_busresource(dev, p->minimum, len);
-}
-
 static acpi_status pnpacpi_allocated_resource(struct acpi_resource *res,
 					      void *data)
 {
 	struct pnp_dev *dev = data;
-	struct acpi_resource_irq *irq;
 	struct acpi_resource_dma *dma;
-	struct acpi_resource_io *io;
-	struct acpi_resource_fixed_io *fixed_io;
 	struct acpi_resource_vendor_typed *vendor_typed;
-	struct acpi_resource_memory24 *memory24;
-	struct acpi_resource_memory32 *memory32;
-	struct acpi_resource_fixed_memory32 *fixed_memory32;
-	struct acpi_resource_extended_irq *extended_irq;
+	struct resource r;
 	int i, flags;
 
-	switch (res->type) {
-	case ACPI_RESOURCE_TYPE_IRQ:
-		/*
-		 * Per spec, only one interrupt per descriptor is allowed in
-		 * _CRS, but some firmware violates this, so parse them all.
-		 */
-		irq = &res->data.irq;
-		if (irq->interrupt_count == 0)
-			pnp_add_irq_resource(dev, 0, IORESOURCE_DISABLED);
-		else {
-			for (i = 0; i < irq->interrupt_count; i++) {
-				pnpacpi_parse_allocated_irqresource(dev,
-					irq->interrupts[i],
-					irq->triggering,
-					irq->polarity,
-				    irq->sharable);
-			}
+	if (acpi_dev_resource_memory(res, &r)
+	    || acpi_dev_resource_io(res, &r)
+	    || acpi_dev_resource_address_space(res, &r)
+	    || acpi_dev_resource_ext_address_space(res, &r)) {
+		pnp_add_resource(dev, &r);
+		return AE_OK;
+	}
 
+	r.flags = 0;
+	if (acpi_dev_resource_interrupt(res, 0, &r)) {
+		pnpacpi_add_irqresource(dev, &r);
+		for (i = 1; acpi_dev_resource_interrupt(res, i, &r); i++)
+			pnpacpi_add_irqresource(dev, &r);
+
+		if (i > 1) {
 			/*
 			 * The IRQ encoder puts a single interrupt in each
 			 * descriptor, so if a _CRS descriptor has more than
 			 * one interrupt, we won't be able to re-encode it.
 			 */
-			if (pnp_can_write(dev) && irq->interrupt_count > 1) {
+			if (pnp_can_write(dev)) {
 				dev_warn(&dev->dev, "multiple interrupts in "
 					 "_CRS descriptor; configuration can't "
 					 "be changed\n");
 				dev->capabilities &= ~PNP_WRITE;
 			}
 		}
-		break;
+		return AE_OK;
+	} else if (r.flags & IORESOURCE_DISABLED) {
+		pnp_add_irq_resource(dev, 0, IORESOURCE_DISABLED);
+		return AE_OK;
+	}
 
+	switch (res->type) {
 	case ACPI_RESOURCE_TYPE_DMA:
 		dma = &res->data.dma;
 		if (dma->channel_count > 0 && dma->channels[0] != (u8) -1)
@@ -383,26 +227,10 @@
 		pnp_add_dma_resource(dev, dma->channels[0], flags);
 		break;
 
-	case ACPI_RESOURCE_TYPE_IO:
-		io = &res->data.io;
-		pnpacpi_parse_allocated_ioresource(dev,
-			io->minimum,
-			io->address_length,
-			io->io_decode, 0);
-		break;
-
 	case ACPI_RESOURCE_TYPE_START_DEPENDENT:
 	case ACPI_RESOURCE_TYPE_END_DEPENDENT:
 		break;
 
-	case ACPI_RESOURCE_TYPE_FIXED_IO:
-		fixed_io = &res->data.fixed_io;
-		pnpacpi_parse_allocated_ioresource(dev,
-			fixed_io->address,
-			fixed_io->address_length,
-			ACPI_DECODE_10, 0);
-		break;
-
 	case ACPI_RESOURCE_TYPE_VENDOR:
 		vendor_typed = &res->data.vendor_typed;
 		pnpacpi_parse_allocated_vendor(dev, vendor_typed);
@@ -411,66 +239,6 @@
 	case ACPI_RESOURCE_TYPE_END_TAG:
 		break;
 
-	case ACPI_RESOURCE_TYPE_MEMORY24:
-		memory24 = &res->data.memory24;
-		pnpacpi_parse_allocated_memresource(dev,
-			memory24->minimum,
-			memory24->address_length,
-			memory24->write_protect, 0);
-		break;
-	case ACPI_RESOURCE_TYPE_MEMORY32:
-		memory32 = &res->data.memory32;
-		pnpacpi_parse_allocated_memresource(dev,
-			memory32->minimum,
-			memory32->address_length,
-			memory32->write_protect, 0);
-		break;
-	case ACPI_RESOURCE_TYPE_FIXED_MEMORY32:
-		fixed_memory32 = &res->data.fixed_memory32;
-		pnpacpi_parse_allocated_memresource(dev,
-			fixed_memory32->address,
-			fixed_memory32->address_length,
-			fixed_memory32->write_protect, 0);
-		break;
-	case ACPI_RESOURCE_TYPE_ADDRESS16:
-	case ACPI_RESOURCE_TYPE_ADDRESS32:
-	case ACPI_RESOURCE_TYPE_ADDRESS64:
-		pnpacpi_parse_allocated_address_space(dev, res);
-		break;
-
-	case ACPI_RESOURCE_TYPE_EXTENDED_ADDRESS64:
-		pnpacpi_parse_allocated_ext_address_space(dev, res);
-		break;
-
-	case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
-		extended_irq = &res->data.extended_irq;
-
-		if (extended_irq->interrupt_count == 0)
-			pnp_add_irq_resource(dev, 0, IORESOURCE_DISABLED);
-		else {
-			for (i = 0; i < extended_irq->interrupt_count; i++) {
-				pnpacpi_parse_allocated_irqresource(dev,
-					extended_irq->interrupts[i],
-					extended_irq->triggering,
-					extended_irq->polarity,
-					extended_irq->sharable);
-			}
-
-			/*
-			 * The IRQ encoder puts a single interrupt in each
-			 * descriptor, so if a _CRS descriptor has more than
-			 * one interrupt, we won't be able to re-encode it.
-			 */
-			if (pnp_can_write(dev) &&
-			    extended_irq->interrupt_count > 1) {
-				dev_warn(&dev->dev, "multiple interrupts in "
-					 "_CRS descriptor; configuration can't "
-					 "be changed\n");
-				dev->capabilities &= ~PNP_WRITE;
-			}
-		}
-		break;
-
 	case ACPI_RESOURCE_TYPE_GENERIC_REGISTER:
 		break;
 
@@ -531,7 +299,7 @@
 		if (p->interrupts[i])
 			__set_bit(p->interrupts[i], map.bits);
 
-	flags = irq_flags(p->triggering, p->polarity, p->sharable);
+	flags = acpi_dev_irq_flags(p->triggering, p->polarity, p->sharable);
 	pnp_register_irq_resource(dev, option_flags, &map, flags);
 }
 
@@ -555,7 +323,7 @@
 		}
 	}
 
-	flags = irq_flags(p->triggering, p->polarity, p->sharable);
+	flags = acpi_dev_irq_flags(p->triggering, p->polarity, p->sharable);
 	pnp_register_irq_resource(dev, option_flags, &map, flags);
 }
 
diff --git a/drivers/pnp/resource.c b/drivers/pnp/resource.c
index b0ecacb..3e6db1c 100644
--- a/drivers/pnp/resource.c
+++ b/drivers/pnp/resource.c
@@ -503,6 +503,22 @@
 	return pnp_res;
 }
 
+struct pnp_resource *pnp_add_resource(struct pnp_dev *dev,
+				      struct resource *res)
+{
+	struct pnp_resource *pnp_res;
+
+	pnp_res = pnp_new_resource(dev);
+	if (!pnp_res) {
+		dev_err(&dev->dev, "can't add resource %pR\n", res);
+		return NULL;
+	}
+
+	pnp_res->res = *res;
+	dev_dbg(&dev->dev, "%pR\n", res);
+	return pnp_res;
+}
+
 struct pnp_resource *pnp_add_irq_resource(struct pnp_dev *dev, int irq,
 					  int flags)
 {
diff --git a/drivers/rapidio/rio.c b/drivers/rapidio/rio.c
index 08bf922..d553b5d 100644
--- a/drivers/rapidio/rio.c
+++ b/drivers/rapidio/rio.c
@@ -401,7 +401,7 @@
 /**
  * rio_map_inb_region -- Map inbound memory region.
  * @mport: Master port.
- * @lstart: physical address of memory region to be mapped
+ * @local: physical address of memory region to be mapped
  * @rbase: RIO base address assigned to this window
  * @size: Size of the memory region
  * @rflags: Flags for mapping.
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 5c4829c..e872c8b 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1381,22 +1381,14 @@
 }
 EXPORT_SYMBOL_GPL(regulator_get_exclusive);
 
-/**
- * regulator_put - "free" the regulator source
- * @regulator: regulator source
- *
- * Note: drivers must ensure that all regulator_enable calls made on this
- * regulator source are balanced by regulator_disable calls prior to calling
- * this function.
- */
-void regulator_put(struct regulator *regulator)
+/* Locks held by regulator_put() */
+static void _regulator_put(struct regulator *regulator)
 {
 	struct regulator_dev *rdev;
 
 	if (regulator == NULL || IS_ERR(regulator))
 		return;
 
-	mutex_lock(&regulator_list_mutex);
 	rdev = regulator->rdev;
 
 	debugfs_remove_recursive(regulator->debugfs);
@@ -1412,6 +1404,20 @@
 	rdev->exclusive = 0;
 
 	module_put(rdev->owner);
+}
+
+/**
+ * regulator_put - "free" the regulator source
+ * @regulator: regulator source
+ *
+ * Note: drivers must ensure that all regulator_enable calls made on this
+ * regulator source are balanced by regulator_disable calls prior to calling
+ * this function.
+ */
+void regulator_put(struct regulator *regulator)
+{
+	mutex_lock(&regulator_list_mutex);
+	_regulator_put(regulator);
 	mutex_unlock(&regulator_list_mutex);
 }
 EXPORT_SYMBOL_GPL(regulator_put);
@@ -1974,7 +1980,7 @@
 	if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE)) {
 		ret = regulator_get_voltage(regulator);
 		if (ret >= 0)
-			return (min_uV >= ret && ret <= max_uV);
+			return (min_uV <= ret && ret <= max_uV);
 		else
 			return ret;
 	}
@@ -3365,7 +3371,7 @@
 		if (ret != 0) {
 			rdev_err(rdev, "Failed to request enable GPIO%d: %d\n",
 				 config->ena_gpio, ret);
-			goto clean;
+			goto wash;
 		}
 
 		rdev->ena_gpio = config->ena_gpio;
@@ -3445,10 +3451,11 @@
 
 scrub:
 	if (rdev->supply)
-		regulator_put(rdev->supply);
+		_regulator_put(rdev->supply);
 	if (rdev->ena_gpio)
 		gpio_free(rdev->ena_gpio);
 	kfree(rdev->constraints);
+wash:
 	device_unregister(&rdev->dev);
 	/* device core frees rdev */
 	rdev = ERR_PTR(ret);
diff --git a/drivers/remoteproc/remoteproc_virtio.c b/drivers/remoteproc/remoteproc_virtio.c
index e7a4780..9e198e5 100644
--- a/drivers/remoteproc/remoteproc_virtio.c
+++ b/drivers/remoteproc/remoteproc_virtio.c
@@ -120,15 +120,11 @@
 	return vq;
 }
 
-static void rproc_virtio_del_vqs(struct virtio_device *vdev)
+static void __rproc_virtio_del_vqs(struct virtio_device *vdev)
 {
 	struct virtqueue *vq, *n;
-	struct rproc *rproc = vdev_to_rproc(vdev);
 	struct rproc_vring *rvring;
 
-	/* power down the remote processor before deleting vqs */
-	rproc_shutdown(rproc);
-
 	list_for_each_entry_safe(vq, n, &vdev->vqs, list) {
 		rvring = vq->priv;
 		rvring->vq = NULL;
@@ -137,6 +133,16 @@
 	}
 }
 
+static void rproc_virtio_del_vqs(struct virtio_device *vdev)
+{
+	struct rproc *rproc = vdev_to_rproc(vdev);
+
+	/* power down the remote processor before deleting vqs */
+	rproc_shutdown(rproc);
+
+	__rproc_virtio_del_vqs(vdev);
+}
+
 static int rproc_virtio_find_vqs(struct virtio_device *vdev, unsigned nvqs,
 		       struct virtqueue *vqs[],
 		       vq_callback_t *callbacks[],
@@ -163,7 +169,7 @@
 	return 0;
 
 error:
-	rproc_virtio_del_vqs(vdev);
+	__rproc_virtio_del_vqs(vdev);
 	return ret;
 }
 
diff --git a/drivers/rtc/rtc-tps65910.c b/drivers/rtc/rtc-tps65910.c
index 7a82337..073108d 100644
--- a/drivers/rtc/rtc-tps65910.c
+++ b/drivers/rtc/rtc-tps65910.c
@@ -288,11 +288,11 @@
 static int __devexit tps65910_rtc_remove(struct platform_device *pdev)
 {
 	/* leave rtc running, but disable irqs */
-	struct rtc_device *rtc = platform_get_drvdata(pdev);
+	struct tps65910_rtc *tps_rtc = platform_get_drvdata(pdev);
 
-	tps65910_rtc_alarm_irq_enable(&rtc->dev, 0);
+	tps65910_rtc_alarm_irq_enable(&pdev->dev, 0);
 
-	rtc_device_unregister(rtc);
+	rtc_device_unregister(tps_rtc->rtc);
 	return 0;
 }
 
diff --git a/drivers/s390/char/con3215.c b/drivers/s390/char/con3215.c
index 9ffb6d5..4ed343e 100644
--- a/drivers/s390/char/con3215.c
+++ b/drivers/s390/char/con3215.c
@@ -44,7 +44,6 @@
 #define RAW3215_NR_CCWS	    3
 #define RAW3215_TIMEOUT	    HZ/10     /* time for delayed output */
 
-#define RAW3215_FIXED	    1	      /* 3215 console device is not be freed */
 #define RAW3215_WORKING	    4	      /* set if a request is being worked on */
 #define RAW3215_THROTTLED   8	      /* set if reading is disabled */
 #define RAW3215_STOPPED	    16	      /* set if writing is disabled */
@@ -339,8 +338,10 @@
 	struct tty_struct *tty;
 
 	tty = tty_port_tty_get(&raw->port);
-	tty_wakeup(tty);
-	tty_kref_put(tty);
+	if (tty) {
+		tty_wakeup(tty);
+		tty_kref_put(tty);
+	}
 }
 
 /*
@@ -629,8 +630,7 @@
 	DECLARE_WAITQUEUE(wait, current);
 	unsigned long flags;
 
-	if (!(raw->port.flags & ASYNC_INITIALIZED) ||
-			(raw->flags & RAW3215_FIXED))
+	if (!(raw->port.flags & ASYNC_INITIALIZED))
 		return;
 	/* Wait for outstanding requests, then free irq */
 	spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags);
@@ -926,8 +926,6 @@
 	dev_set_drvdata(&cdev->dev, raw);
 	cdev->handler = raw3215_irq;
 
-	raw->flags |= RAW3215_FIXED;
-
 	/* Request the console irq */
 	if (raw3215_startup(raw) != 0) {
 		raw3215_free_info(raw);
diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index 3e25d315..4d6ba00 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -2942,13 +2942,33 @@
 	QETH_DBF_TEXT(SETUP, 2, "qipasscb");
 
 	cmd = (struct qeth_ipa_cmd *) data;
+
+	switch (cmd->hdr.return_code) {
+	case IPA_RC_NOTSUPP:
+	case IPA_RC_L2_UNSUPPORTED_CMD:
+		QETH_DBF_TEXT(SETUP, 2, "ipaunsup");
+		card->options.ipa4.supported_funcs |= IPA_SETADAPTERPARMS;
+		card->options.ipa6.supported_funcs |= IPA_SETADAPTERPARMS;
+		return -0;
+	default:
+		if (cmd->hdr.return_code) {
+			QETH_DBF_MESSAGE(1, "%s IPA_CMD_QIPASSIST: Unhandled "
+						"rc=%d\n",
+						dev_name(&card->gdev->dev),
+						cmd->hdr.return_code);
+			return 0;
+		}
+	}
+
 	if (cmd->hdr.prot_version == QETH_PROT_IPV4) {
 		card->options.ipa4.supported_funcs = cmd->hdr.ipa_supported;
 		card->options.ipa4.enabled_funcs = cmd->hdr.ipa_enabled;
-	} else {
+	} else if (cmd->hdr.prot_version == QETH_PROT_IPV6) {
 		card->options.ipa6.supported_funcs = cmd->hdr.ipa_supported;
 		card->options.ipa6.enabled_funcs = cmd->hdr.ipa_enabled;
-	}
+	} else
+		QETH_DBF_MESSAGE(1, "%s IPA_CMD_QIPASSIST: Flawed LIC detected"
+					"\n", dev_name(&card->gdev->dev));
 	QETH_DBF_TEXT(SETUP, 2, "suppenbl");
 	QETH_DBF_TEXT_(SETUP, 2, "%08x", (__u32)cmd->hdr.ipa_supported);
 	QETH_DBF_TEXT_(SETUP, 2, "%08x", (__u32)cmd->hdr.ipa_enabled);
diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c
index e67e025..fddb626 100644
--- a/drivers/s390/net/qeth_l2_main.c
+++ b/drivers/s390/net/qeth_l2_main.c
@@ -626,10 +626,13 @@
 	QETH_DBF_TEXT(SETUP, 2, "doL2init");
 	QETH_DBF_TEXT_(SETUP, 2, "doL2%s", CARD_BUS_ID(card));
 
-	rc = qeth_query_setadapterparms(card);
-	if (rc) {
-		QETH_DBF_MESSAGE(2, "could not query adapter parameters on "
-			"device %s: x%x\n", CARD_BUS_ID(card), rc);
+	if (qeth_is_supported(card, IPA_SETADAPTERPARMS)) {
+		rc = qeth_query_setadapterparms(card);
+		if (rc) {
+			QETH_DBF_MESSAGE(2, "could not query adapter "
+				"parameters on device %s: x%x\n",
+				CARD_BUS_ID(card), rc);
+		}
 	}
 
 	if (card->info.type == QETH_CARD_TYPE_IQD ||
@@ -676,7 +679,7 @@
 		return -ERESTARTSYS;
 	}
 	rc = qeth_l2_send_delmac(card, &card->dev->dev_addr[0]);
-	if (!rc)
+	if (!rc || (rc == IPA_RC_L2_MAC_NOT_FOUND))
 		rc = qeth_l2_send_setmac(card, addr->sa_data);
 	return rc ? -EINVAL : 0;
 }
diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c
index c1bafc3..9594ab6 100644
--- a/drivers/scsi/isci/request.c
+++ b/drivers/scsi/isci/request.c
@@ -1972,7 +1972,7 @@
 								      frame_index,
 								      (void **)&frame_buffer);
 
-			sci_controller_copy_sata_response(&ireq->stp.req,
+			sci_controller_copy_sata_response(&ireq->stp.rsp,
 							       frame_header,
 							       frame_buffer);
 
diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h
index 16b7a72..3b2365c 100644
--- a/drivers/scsi/megaraid/megaraid_sas.h
+++ b/drivers/scsi/megaraid/megaraid_sas.h
@@ -1276,7 +1276,7 @@
 } __attribute__ ((packed));
 
 struct megasas_aen_event {
-	struct work_struct hotplug_work;
+	struct delayed_work hotplug_work;
 	struct megasas_instance *instance;
 };
 
diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index d2c5366..e4f2baa 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -2060,9 +2060,9 @@
 		} else {
 			ev->instance = instance;
 			instance->ev = ev;
-			INIT_WORK(&ev->hotplug_work, megasas_aen_polling);
-			schedule_delayed_work(
-				(struct delayed_work *)&ev->hotplug_work, 0);
+			INIT_DELAYED_WORK(&ev->hotplug_work,
+					  megasas_aen_polling);
+			schedule_delayed_work(&ev->hotplug_work, 0);
 		}
 	}
 }
@@ -4352,8 +4352,7 @@
 	/* cancel the delayed work if this work still in queue */
 	if (instance->ev != NULL) {
 		struct megasas_aen_event *ev = instance->ev;
-		cancel_delayed_work_sync(
-			(struct delayed_work *)&ev->hotplug_work);
+		cancel_delayed_work_sync(&ev->hotplug_work);
 		instance->ev = NULL;
 	}
 
@@ -4545,8 +4544,7 @@
 	/* cancel the delayed work if this work still in queue*/
 	if (instance->ev != NULL) {
 		struct megasas_aen_event *ev = instance->ev;
-		cancel_delayed_work_sync(
-			(struct delayed_work *)&ev->hotplug_work);
+		cancel_delayed_work_sync(&ev->hotplug_work);
 		instance->ev = NULL;
 	}
 
@@ -5190,7 +5188,7 @@
 megasas_aen_polling(struct work_struct *work)
 {
 	struct megasas_aen_event *ev =
-		container_of(work, struct megasas_aen_event, hotplug_work);
+		container_of(work, struct megasas_aen_event, hotplug_work.work);
 	struct megasas_instance *instance = ev->instance;
 	union megasas_evt_class_locale class_locale;
 	struct  Scsi_Host *host;
diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index 2936b44..2c0d0ec 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -55,6 +55,7 @@
 #include <linux/cpu.h>
 #include <linux/mutex.h>
 #include <linux/async.h>
+#include <asm/unaligned.h>
 
 #include <scsi/scsi.h>
 #include <scsi/scsi_cmnd.h>
@@ -1062,6 +1063,50 @@
 EXPORT_SYMBOL_GPL(scsi_get_vpd_page);
 
 /**
+ * scsi_report_opcode - Find out if a given command opcode is supported
+ * @sdev:	scsi device to query
+ * @buffer:	scratch buffer (must be at least 20 bytes long)
+ * @len:	length of buffer
+ * @opcode:	opcode for command to look up
+ *
+ * Uses the REPORT SUPPORTED OPERATION CODES to look up the given
+ * opcode. Returns 0 if RSOC fails or if the command opcode is
+ * unsupported. Returns 1 if the device claims to support the command.
+ */
+int scsi_report_opcode(struct scsi_device *sdev, unsigned char *buffer,
+		       unsigned int len, unsigned char opcode)
+{
+	unsigned char cmd[16];
+	struct scsi_sense_hdr sshdr;
+	int result;
+
+	if (sdev->no_report_opcodes || sdev->scsi_level < SCSI_SPC_3)
+		return 0;
+
+	memset(cmd, 0, 16);
+	cmd[0] = MAINTENANCE_IN;
+	cmd[1] = MI_REPORT_SUPPORTED_OPERATION_CODES;
+	cmd[2] = 1;		/* One command format */
+	cmd[3] = opcode;
+	put_unaligned_be32(len, &cmd[6]);
+	memset(buffer, 0, len);
+
+	result = scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buffer, len,
+				  &sshdr, 30 * HZ, 3, NULL);
+
+	if (result && scsi_sense_valid(&sshdr) &&
+	    sshdr.sense_key == ILLEGAL_REQUEST &&
+	    (sshdr.asc == 0x20 || sshdr.asc == 0x24) && sshdr.ascq == 0x00)
+		return 0;
+
+	if ((buffer[1] & 3) == 3) /* Command supported */
+		return 1;
+
+	return 0;
+}
+EXPORT_SYMBOL(scsi_report_opcode);
+
+/**
  * scsi_device_get  -  get an additional reference to a scsi_device
  * @sdev:	device to get a reference to
  *
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index da36a3a..9032e91 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -900,11 +900,23 @@
 				action = ACTION_FAIL;
 				error = -EILSEQ;
 			/* INVALID COMMAND OPCODE or INVALID FIELD IN CDB */
-			} else if ((sshdr.asc == 0x20 || sshdr.asc == 0x24) &&
-				   (cmd->cmnd[0] == UNMAP ||
-				    cmd->cmnd[0] == WRITE_SAME_16 ||
-				    cmd->cmnd[0] == WRITE_SAME)) {
-				description = "Discard failure";
+			} else if (sshdr.asc == 0x20 || sshdr.asc == 0x24) {
+				switch (cmd->cmnd[0]) {
+				case UNMAP:
+					description = "Discard failure";
+					break;
+				case WRITE_SAME:
+				case WRITE_SAME_16:
+					if (cmd->cmnd[1] & 0x8)
+						description = "Discard failure";
+					else
+						description =
+							"Write same failure";
+					break;
+				default:
+					description = "Invalid command failure";
+					break;
+				}
 				action = ACTION_FAIL;
 				error = -EREMOTEIO;
 			} else
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 12f6fdf..352bc77 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -99,6 +99,7 @@
 #endif
 
 static void sd_config_discard(struct scsi_disk *, unsigned int);
+static void sd_config_write_same(struct scsi_disk *);
 static int  sd_revalidate_disk(struct gendisk *);
 static void sd_unlock_native_capacity(struct gendisk *disk);
 static int  sd_probe(struct device *);
@@ -395,6 +396,45 @@
 	return err ? err : count;
 }
 
+static ssize_t
+sd_show_write_same_blocks(struct device *dev, struct device_attribute *attr,
+			  char *buf)
+{
+	struct scsi_disk *sdkp = to_scsi_disk(dev);
+
+	return snprintf(buf, 20, "%u\n", sdkp->max_ws_blocks);
+}
+
+static ssize_t
+sd_store_write_same_blocks(struct device *dev, struct device_attribute *attr,
+			   const char *buf, size_t count)
+{
+	struct scsi_disk *sdkp = to_scsi_disk(dev);
+	struct scsi_device *sdp = sdkp->device;
+	unsigned long max;
+	int err;
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EACCES;
+
+	if (sdp->type != TYPE_DISK)
+		return -EINVAL;
+
+	err = kstrtoul(buf, 10, &max);
+
+	if (err)
+		return err;
+
+	if (max == 0)
+		sdp->no_write_same = 1;
+	else if (max <= SD_MAX_WS16_BLOCKS)
+		sdkp->max_ws_blocks = max;
+
+	sd_config_write_same(sdkp);
+
+	return count;
+}
+
 static struct device_attribute sd_disk_attrs[] = {
 	__ATTR(cache_type, S_IRUGO|S_IWUSR, sd_show_cache_type,
 	       sd_store_cache_type),
@@ -410,6 +450,8 @@
 	__ATTR(thin_provisioning, S_IRUGO, sd_show_thin_provisioning, NULL),
 	__ATTR(provisioning_mode, S_IRUGO|S_IWUSR, sd_show_provisioning_mode,
 	       sd_store_provisioning_mode),
+	__ATTR(max_write_same_blocks, S_IRUGO|S_IWUSR,
+	       sd_show_write_same_blocks, sd_store_write_same_blocks),
 	__ATTR(max_medium_access_timeouts, S_IRUGO|S_IWUSR,
 	       sd_show_max_medium_access_timeouts,
 	       sd_store_max_medium_access_timeouts),
@@ -561,19 +603,23 @@
 		return;
 
 	case SD_LBP_UNMAP:
-		max_blocks = min_not_zero(sdkp->max_unmap_blocks, 0xffffffff);
+		max_blocks = min_not_zero(sdkp->max_unmap_blocks,
+					  (u32)SD_MAX_WS16_BLOCKS);
 		break;
 
 	case SD_LBP_WS16:
-		max_blocks = min_not_zero(sdkp->max_ws_blocks, 0xffffffff);
+		max_blocks = min_not_zero(sdkp->max_ws_blocks,
+					  (u32)SD_MAX_WS16_BLOCKS);
 		break;
 
 	case SD_LBP_WS10:
-		max_blocks = min_not_zero(sdkp->max_ws_blocks, (u32)0xffff);
+		max_blocks = min_not_zero(sdkp->max_ws_blocks,
+					  (u32)SD_MAX_WS10_BLOCKS);
 		break;
 
 	case SD_LBP_ZERO:
-		max_blocks = min_not_zero(sdkp->max_ws_blocks, (u32)0xffff);
+		max_blocks = min_not_zero(sdkp->max_ws_blocks,
+					  (u32)SD_MAX_WS10_BLOCKS);
 		q->limits.discard_zeroes_data = 1;
 		break;
 	}
@@ -583,29 +629,26 @@
 }
 
 /**
- * scsi_setup_discard_cmnd - unmap blocks on thinly provisioned device
+ * sd_setup_discard_cmnd - unmap blocks on thinly provisioned device
  * @sdp: scsi device to operate one
  * @rq: Request to prepare
  *
  * Will issue either UNMAP or WRITE SAME(16) depending on preference
  * indicated by target device.
  **/
-static int scsi_setup_discard_cmnd(struct scsi_device *sdp, struct request *rq)
+static int sd_setup_discard_cmnd(struct scsi_device *sdp, struct request *rq)
 {
 	struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
-	struct bio *bio = rq->bio;
-	sector_t sector = bio->bi_sector;
-	unsigned int nr_sectors = bio_sectors(bio);
+	sector_t sector = blk_rq_pos(rq);
+	unsigned int nr_sectors = blk_rq_sectors(rq);
+	unsigned int nr_bytes = blk_rq_bytes(rq);
 	unsigned int len;
 	int ret;
 	char *buf;
 	struct page *page;
 
-	if (sdkp->device->sector_size == 4096) {
-		sector >>= 3;
-		nr_sectors >>= 3;
-	}
-
+	sector >>= ilog2(sdp->sector_size) - 9;
+	nr_sectors >>= ilog2(sdp->sector_size) - 9;
 	rq->timeout = SD_TIMEOUT;
 
 	memset(rq->cmd, 0, rq->cmd_len);
@@ -660,6 +703,7 @@
 	blk_add_request_payload(rq, page, len);
 	ret = scsi_setup_blk_pc_cmnd(sdp, rq);
 	rq->buffer = page_address(page);
+	rq->__data_len = nr_bytes;
 
 out:
 	if (ret != BLKPREP_OK) {
@@ -669,6 +713,83 @@
 	return ret;
 }
 
+static void sd_config_write_same(struct scsi_disk *sdkp)
+{
+	struct request_queue *q = sdkp->disk->queue;
+	unsigned int logical_block_size = sdkp->device->sector_size;
+	unsigned int blocks = 0;
+
+	if (sdkp->device->no_write_same) {
+		sdkp->max_ws_blocks = 0;
+		goto out;
+	}
+
+	/* Some devices can not handle block counts above 0xffff despite
+	 * supporting WRITE SAME(16). Consequently we default to 64k
+	 * blocks per I/O unless the device explicitly advertises a
+	 * bigger limit.
+	 */
+	if (sdkp->max_ws_blocks == 0)
+		sdkp->max_ws_blocks = SD_MAX_WS10_BLOCKS;
+
+	if (sdkp->ws16 || sdkp->max_ws_blocks > SD_MAX_WS10_BLOCKS)
+		blocks = min_not_zero(sdkp->max_ws_blocks,
+				      (u32)SD_MAX_WS16_BLOCKS);
+	else
+		blocks = min_not_zero(sdkp->max_ws_blocks,
+				      (u32)SD_MAX_WS10_BLOCKS);
+
+out:
+	blk_queue_max_write_same_sectors(q, blocks * (logical_block_size >> 9));
+}
+
+/**
+ * sd_setup_write_same_cmnd - write the same data to multiple blocks
+ * @sdp: scsi device to operate one
+ * @rq: Request to prepare
+ *
+ * Will issue either WRITE SAME(10) or WRITE SAME(16) depending on
+ * preference indicated by target device.
+ **/
+static int sd_setup_write_same_cmnd(struct scsi_device *sdp, struct request *rq)
+{
+	struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
+	struct bio *bio = rq->bio;
+	sector_t sector = blk_rq_pos(rq);
+	unsigned int nr_sectors = blk_rq_sectors(rq);
+	unsigned int nr_bytes = blk_rq_bytes(rq);
+	int ret;
+
+	if (sdkp->device->no_write_same)
+		return BLKPREP_KILL;
+
+	BUG_ON(bio_offset(bio) || bio_iovec(bio)->bv_len != sdp->sector_size);
+
+	sector >>= ilog2(sdp->sector_size) - 9;
+	nr_sectors >>= ilog2(sdp->sector_size) - 9;
+
+	rq->__data_len = sdp->sector_size;
+	rq->timeout = SD_WRITE_SAME_TIMEOUT;
+	memset(rq->cmd, 0, rq->cmd_len);
+
+	if (sdkp->ws16 || sector > 0xffffffff || nr_sectors > 0xffff) {
+		rq->cmd_len = 16;
+		rq->cmd[0] = WRITE_SAME_16;
+		put_unaligned_be64(sector, &rq->cmd[2]);
+		put_unaligned_be32(nr_sectors, &rq->cmd[10]);
+	} else {
+		rq->cmd_len = 10;
+		rq->cmd[0] = WRITE_SAME;
+		put_unaligned_be32(sector, &rq->cmd[2]);
+		put_unaligned_be16(nr_sectors, &rq->cmd[7]);
+	}
+
+	ret = scsi_setup_blk_pc_cmnd(sdp, rq);
+	rq->__data_len = nr_bytes;
+
+	return ret;
+}
+
 static int scsi_setup_flush_cmnd(struct scsi_device *sdp, struct request *rq)
 {
 	rq->timeout = SD_FLUSH_TIMEOUT;
@@ -712,7 +833,10 @@
 	 * block PC requests to make life easier.
 	 */
 	if (rq->cmd_flags & REQ_DISCARD) {
-		ret = scsi_setup_discard_cmnd(sdp, rq);
+		ret = sd_setup_discard_cmnd(sdp, rq);
+		goto out;
+	} else if (rq->cmd_flags & REQ_WRITE_SAME) {
+		ret = sd_setup_write_same_cmnd(sdp, rq);
 		goto out;
 	} else if (rq->cmd_flags & REQ_FLUSH) {
 		ret = scsi_setup_flush_cmnd(sdp, rq);
@@ -1482,12 +1606,21 @@
 	unsigned int good_bytes = result ? 0 : scsi_bufflen(SCpnt);
 	struct scsi_sense_hdr sshdr;
 	struct scsi_disk *sdkp = scsi_disk(SCpnt->request->rq_disk);
+	struct request *req = SCpnt->request;
 	int sense_valid = 0;
 	int sense_deferred = 0;
 	unsigned char op = SCpnt->cmnd[0];
+	unsigned char unmap = SCpnt->cmnd[1] & 8;
 
-	if ((SCpnt->request->cmd_flags & REQ_DISCARD) && !result)
-		scsi_set_resid(SCpnt, 0);
+	if (req->cmd_flags & REQ_DISCARD || req->cmd_flags & REQ_WRITE_SAME) {
+		if (!result) {
+			good_bytes = blk_rq_bytes(req);
+			scsi_set_resid(SCpnt, 0);
+		} else {
+			good_bytes = 0;
+			scsi_set_resid(SCpnt, blk_rq_bytes(req));
+		}
+	}
 
 	if (result) {
 		sense_valid = scsi_command_normalize_sense(SCpnt, &sshdr);
@@ -1536,9 +1669,25 @@
 		if (sshdr.asc == 0x10)  /* DIX: Host detected corruption */
 			good_bytes = sd_completed_bytes(SCpnt);
 		/* INVALID COMMAND OPCODE or INVALID FIELD IN CDB */
-		if ((sshdr.asc == 0x20 || sshdr.asc == 0x24) &&
-		    (op == UNMAP || op == WRITE_SAME_16 || op == WRITE_SAME))
-			sd_config_discard(sdkp, SD_LBP_DISABLE);
+		if (sshdr.asc == 0x20 || sshdr.asc == 0x24) {
+			switch (op) {
+			case UNMAP:
+				sd_config_discard(sdkp, SD_LBP_DISABLE);
+				break;
+			case WRITE_SAME_16:
+			case WRITE_SAME:
+				if (unmap)
+					sd_config_discard(sdkp, SD_LBP_DISABLE);
+				else {
+					sdkp->device->no_write_same = 1;
+					sd_config_write_same(sdkp);
+
+					good_bytes = 0;
+					req->__data_len = blk_rq_bytes(req);
+					req->cmd_flags |= REQ_QUIET;
+				}
+			}
+		}
 		break;
 	default:
 		break;
@@ -2374,9 +2523,7 @@
 	if (buffer[3] == 0x3c) {
 		unsigned int lba_count, desc_count;
 
-		sdkp->max_ws_blocks =
-			(u32) min_not_zero(get_unaligned_be64(&buffer[36]),
-					   (u64)0xffffffff);
+		sdkp->max_ws_blocks = (u32)get_unaligned_be64(&buffer[36]);
 
 		if (!sdkp->lbpme)
 			goto out;
@@ -2469,6 +2616,13 @@
 	kfree(buffer);
 }
 
+static void sd_read_write_same(struct scsi_disk *sdkp, unsigned char *buffer)
+{
+	if (scsi_report_opcode(sdkp->device, buffer, SD_BUF_SIZE,
+			       WRITE_SAME_16))
+		sdkp->ws16 = 1;
+}
+
 static int sd_try_extended_inquiry(struct scsi_device *sdp)
 {
 	/*
@@ -2528,6 +2682,7 @@
 		sd_read_write_protect_flag(sdkp, buffer);
 		sd_read_cache_type(sdkp, buffer);
 		sd_read_app_tag_own(sdkp, buffer);
+		sd_read_write_same(sdkp, buffer);
 	}
 
 	sdkp->first_scan = 0;
@@ -2545,6 +2700,7 @@
 	blk_queue_flush(sdkp->disk->queue, flush);
 
 	set_capacity(disk, sdkp->capacity);
+	sd_config_write_same(sdkp);
 	kfree(buffer);
 
  out:
diff --git a/drivers/scsi/sd.h b/drivers/scsi/sd.h
index 47c52a6..74a1e4c 100644
--- a/drivers/scsi/sd.h
+++ b/drivers/scsi/sd.h
@@ -14,6 +14,7 @@
 #define SD_TIMEOUT		(30 * HZ)
 #define SD_MOD_TIMEOUT		(75 * HZ)
 #define SD_FLUSH_TIMEOUT	(60 * HZ)
+#define SD_WRITE_SAME_TIMEOUT	(120 * HZ)
 
 /*
  * Number of allowed retries
@@ -39,6 +40,11 @@
 };
 
 enum {
+	SD_MAX_WS10_BLOCKS = 0xffff,
+	SD_MAX_WS16_BLOCKS = 0x7fffff,
+};
+
+enum {
 	SD_LBP_FULL = 0,	/* Full logical block provisioning */
 	SD_LBP_UNMAP,		/* Use UNMAP command */
 	SD_LBP_WS16,		/* Use WRITE SAME(16) with UNMAP bit */
@@ -77,6 +83,7 @@
 	unsigned	lbpws : 1;
 	unsigned	lbpws10 : 1;
 	unsigned	lbpvpd : 1;
+	unsigned	ws16 : 1;
 };
 #define to_scsi_disk(obj) container_of(obj,struct scsi_disk,dev)
 
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 84c2861..718cc1f 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -35,6 +35,8 @@
 #include <linux/sched.h>
 #include <linux/delay.h>
 #include <linux/kthread.h>
+#include <linux/ioport.h>
+#include <linux/acpi.h>
 
 static void spidev_release(struct device *dev)
 {
@@ -93,6 +95,10 @@
 	if (of_driver_match_device(dev, drv))
 		return 1;
 
+	/* Then try ACPI */
+	if (acpi_driver_match_device(dev, drv))
+		return 1;
+
 	if (sdrv->id_table)
 		return !!spi_match_id(sdrv->id_table, spi);
 
@@ -819,7 +825,7 @@
 	if (!master->dev.of_node)
 		return;
 
-	for_each_child_of_node(master->dev.of_node, nc) {
+	for_each_available_child_of_node(master->dev.of_node, nc) {
 		/* Alloc an spi_device */
 		spi = spi_alloc_device(master);
 		if (!spi) {
@@ -888,6 +894,100 @@
 static void of_register_spi_devices(struct spi_master *master) { }
 #endif
 
+#ifdef CONFIG_ACPI
+static int acpi_spi_add_resource(struct acpi_resource *ares, void *data)
+{
+	struct spi_device *spi = data;
+
+	if (ares->type == ACPI_RESOURCE_TYPE_SERIAL_BUS) {
+		struct acpi_resource_spi_serialbus *sb;
+
+		sb = &ares->data.spi_serial_bus;
+		if (sb->type == ACPI_RESOURCE_SERIAL_TYPE_SPI) {
+			spi->chip_select = sb->device_selection;
+			spi->max_speed_hz = sb->connection_speed;
+
+			if (sb->clock_phase == ACPI_SPI_SECOND_PHASE)
+				spi->mode |= SPI_CPHA;
+			if (sb->clock_polarity == ACPI_SPI_START_HIGH)
+				spi->mode |= SPI_CPOL;
+			if (sb->device_polarity == ACPI_SPI_ACTIVE_HIGH)
+				spi->mode |= SPI_CS_HIGH;
+		}
+	} else if (spi->irq < 0) {
+		struct resource r;
+
+		if (acpi_dev_resource_interrupt(ares, 0, &r))
+			spi->irq = r.start;
+	}
+
+	/* Always tell the ACPI core to skip this resource */
+	return 1;
+}
+
+static acpi_status acpi_spi_add_device(acpi_handle handle, u32 level,
+				       void *data, void **return_value)
+{
+	struct spi_master *master = data;
+	struct list_head resource_list;
+	struct acpi_device *adev;
+	struct spi_device *spi;
+	int ret;
+
+	if (acpi_bus_get_device(handle, &adev))
+		return AE_OK;
+	if (acpi_bus_get_status(adev) || !adev->status.present)
+		return AE_OK;
+
+	spi = spi_alloc_device(master);
+	if (!spi) {
+		dev_err(&master->dev, "failed to allocate SPI device for %s\n",
+			dev_name(&adev->dev));
+		return AE_NO_MEMORY;
+	}
+
+	ACPI_HANDLE_SET(&spi->dev, handle);
+	spi->irq = -1;
+
+	INIT_LIST_HEAD(&resource_list);
+	ret = acpi_dev_get_resources(adev, &resource_list,
+				     acpi_spi_add_resource, spi);
+	acpi_dev_free_resource_list(&resource_list);
+
+	if (ret < 0 || !spi->max_speed_hz) {
+		spi_dev_put(spi);
+		return AE_OK;
+	}
+
+	strlcpy(spi->modalias, dev_name(&adev->dev), sizeof(spi->modalias));
+	if (spi_add_device(spi)) {
+		dev_err(&master->dev, "failed to add SPI device %s from ACPI\n",
+			dev_name(&adev->dev));
+		spi_dev_put(spi);
+	}
+
+	return AE_OK;
+}
+
+static void acpi_register_spi_devices(struct spi_master *master)
+{
+	acpi_status status;
+	acpi_handle handle;
+
+	handle = ACPI_HANDLE(&master->dev);
+	if (!handle)
+		return;
+
+	status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, 1,
+				     acpi_spi_add_device, NULL,
+				     master, NULL);
+	if (ACPI_FAILURE(status))
+		dev_warn(&master->dev, "failed to enumerate SPI slaves\n");
+}
+#else
+static inline void acpi_register_spi_devices(struct spi_master *master) {}
+#endif /* CONFIG_ACPI */
+
 static void spi_master_release(struct device *dev)
 {
 	struct spi_master *master;
@@ -1023,8 +1123,9 @@
 		spi_match_master_to_boardinfo(master, &bi->board_info);
 	mutex_unlock(&board_lock);
 
-	/* Register devices from the device tree */
+	/* Register devices from the device tree and ACPI */
 	of_register_spi_devices(master);
+	acpi_register_spi_devices(master);
 done:
 	return status;
 }
diff --git a/drivers/staging/android/android_alarm.h b/drivers/staging/android/android_alarm.h
index f2ffd96..d0cafd6 100644
--- a/drivers/staging/android/android_alarm.h
+++ b/drivers/staging/android/android_alarm.h
@@ -51,12 +51,10 @@
 #define ANDROID_ALARM_WAIT                  _IO('a', 1)
 
 #define ALARM_IOW(c, type, size)            _IOW('a', (c) | ((type) << 4), size)
-#define ALARM_IOR(c, type, size)            _IOR('a', (c) | ((type) << 4), size)
-
 /* Set alarm */
 #define ANDROID_ALARM_SET(type)             ALARM_IOW(2, type, struct timespec)
 #define ANDROID_ALARM_SET_AND_WAIT(type)    ALARM_IOW(3, type, struct timespec)
-#define ANDROID_ALARM_GET_TIME(type)        ALARM_IOR(4, type, struct timespec)
+#define ANDROID_ALARM_GET_TIME(type)        ALARM_IOW(4, type, struct timespec)
 #define ANDROID_ALARM_SET_RTC               _IOW('a', 5, struct timespec)
 #define ANDROID_ALARM_BASE_CMD(cmd)         (cmd & ~(_IOC(0, 0, 0xf0, 0)))
 #define ANDROID_ALARM_IOCTL_TO_TYPE(cmd)    (_IOC_NR(cmd) >> 4)
diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c
index 9097155..dcecbfb 100644
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -1819,8 +1819,10 @@
 	/*
 	 * If the received CDB has aleady been aborted stop processing it here.
 	 */
-	if (transport_check_aborted_status(cmd, 1))
+	if (transport_check_aborted_status(cmd, 1)) {
+		complete(&cmd->t_transport_stop_comp);
 		return;
+	}
 
 	/*
 	 * Determine if IOCTL context caller in requesting the stopping of this
@@ -3067,7 +3069,7 @@
 	unsigned long flags;
 
 	spin_lock_irqsave(&cmd->t_state_lock, flags);
-	if (cmd->se_cmd_flags & SCF_SENT_CHECK_CONDITION) {
+	if (cmd->se_cmd_flags & (SCF_SENT_CHECK_CONDITION | SCF_SENT_DELAYED_TAS)) {
 		spin_unlock_irqrestore(&cmd->t_state_lock, flags);
 		return;
 	}
diff --git a/drivers/tty/hvc/hvc_console.c b/drivers/tty/hvc/hvc_console.c
index a5dec1c..13ee53b 100644
--- a/drivers/tty/hvc/hvc_console.c
+++ b/drivers/tty/hvc/hvc_console.c
@@ -424,7 +424,6 @@
 {
 	struct hvc_struct *hp = tty->driver_data;
 	unsigned long flags;
-	int temp_open_count;
 
 	if (!hp)
 		return;
@@ -444,7 +443,6 @@
 		return;
 	}
 
-	temp_open_count = hp->port.count;
 	hp->port.count = 0;
 	spin_unlock_irqrestore(&hp->port.lock, flags);
 	tty_port_tty_set(&hp->port, NULL);
@@ -453,11 +451,6 @@
 
 	if (hp->ops->notifier_hangup)
 		hp->ops->notifier_hangup(hp, hp->data);
-
-	while(temp_open_count) {
-		--temp_open_count;
-		tty_port_put(&hp->port);
-	}
 }
 
 /*
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 3d7e1ee..65f891b 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -39,6 +39,7 @@
 #include <linux/atmel_pdc.h>
 #include <linux/atmel_serial.h>
 #include <linux/uaccess.h>
+#include <linux/pinctrl/consumer.h>
 
 #include <asm/io.h>
 #include <asm/ioctls.h>
@@ -1773,6 +1774,7 @@
 	struct atmel_uart_data *pdata = pdev->dev.platform_data;
 	void *data;
 	int ret = -ENODEV;
+	struct pinctrl *pinctrl;
 
 	BUILD_BUG_ON(ATMEL_SERIAL_RINGSIZE & (ATMEL_SERIAL_RINGSIZE - 1));
 
@@ -1805,6 +1807,12 @@
 
 	atmel_init_port(port, pdev);
 
+	pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
+	if (IS_ERR(pinctrl)) {
+		ret = PTR_ERR(pinctrl);
+		goto err;
+	}
+
 	if (!atmel_use_dma_rx(&port->uart)) {
 		ret = -ENOMEM;
 		data = kmalloc(sizeof(struct atmel_uart_char)
diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c
index 2bc28a5..1ab1d2c 100644
--- a/drivers/tty/serial/max310x.c
+++ b/drivers/tty/serial/max310x.c
@@ -1239,6 +1239,7 @@
 static const struct spi_device_id max310x_id_table[] = {
 	{ "max3107",	MAX310X_TYPE_MAX3107 },
 	{ "max3108",	MAX310X_TYPE_MAX3108 },
+	{ }
 };
 MODULE_DEVICE_TABLE(spi, max310x_id_table);
 
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index f87d7e8..4e0d0c3 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -539,25 +539,25 @@
 {
 	unsigned short *p = (unsigned short *) vc->vc_pos;
 
-	scr_memmovew(p + nr, p, vc->vc_cols - vc->vc_x);
+	scr_memmovew(p + nr, p, (vc->vc_cols - vc->vc_x) * 2);
 	scr_memsetw(p, vc->vc_video_erase_char, nr * 2);
 	vc->vc_need_wrap = 0;
 	if (DO_UPDATE(vc))
 		do_update_region(vc, (unsigned long) p,
-			(vc->vc_cols - vc->vc_x) / 2 + 1);
+			vc->vc_cols - vc->vc_x);
 }
 
 static void delete_char(struct vc_data *vc, unsigned int nr)
 {
 	unsigned short *p = (unsigned short *) vc->vc_pos;
 
-	scr_memcpyw(p, p + nr, vc->vc_cols - vc->vc_x - nr);
+	scr_memcpyw(p, p + nr, (vc->vc_cols - vc->vc_x - nr) * 2);
 	scr_memsetw(p + vc->vc_cols - vc->vc_x - nr, vc->vc_video_erase_char,
 			nr * 2);
 	vc->vc_need_wrap = 0;
 	if (DO_UPDATE(vc))
 		do_update_region(vc, (unsigned long) p,
-			(vc->vc_cols - vc->vc_x) / 2);
+			vc->vc_cols - vc->vc_x);
 }
 
 static int softcursor_original;
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 1e741bc..f034716 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -2151,8 +2151,15 @@
 irqreturn_t usb_hcd_irq (int irq, void *__hcd)
 {
 	struct usb_hcd		*hcd = __hcd;
+	unsigned long		flags;
 	irqreturn_t		rc;
 
+	/* IRQF_DISABLED doesn't work correctly with shared IRQs
+	 * when the first handler doesn't use it.  So let's just
+	 * assume it's never used.
+	 */
+	local_irq_save(flags);
+
 	if (unlikely(HCD_DEAD(hcd) || !HCD_HW_ACCESSIBLE(hcd)))
 		rc = IRQ_NONE;
 	else if (hcd->driver->irq(hcd) == IRQ_NONE)
@@ -2160,6 +2167,7 @@
 	else
 		rc = IRQ_HANDLED;
 
+	local_irq_restore(flags);
 	return rc;
 }
 EXPORT_SYMBOL_GPL(usb_hcd_irq);
@@ -2347,6 +2355,14 @@
 	int retval;
 
 	if (hcd->driver->irq) {
+
+		/* IRQF_DISABLED doesn't work as advertised when used together
+		 * with IRQF_SHARED. As usb_hcd_irq() will always disable
+		 * interrupts we can remove it here.
+		 */
+		if (irqflags & IRQF_SHARED)
+			irqflags &= ~IRQF_DISABLED;
+
 		snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d",
 				hcd->driver->description, hcd->self.busnum);
 		retval = request_irq(irqnum, &usb_hcd_irq, irqflags,
diff --git a/drivers/usb/early/ehci-dbgp.c b/drivers/usb/early/ehci-dbgp.c
index e426ad6..4bfa78a 100644
--- a/drivers/usb/early/ehci-dbgp.c
+++ b/drivers/usb/early/ehci-dbgp.c
@@ -20,6 +20,7 @@
 #include <linux/usb/ehci_def.h>
 #include <linux/delay.h>
 #include <linux/serial_core.h>
+#include <linux/kconfig.h>
 #include <linux/kgdb.h>
 #include <linux/kthread.h>
 #include <asm/io.h>
@@ -614,12 +615,6 @@
 	return -ENODEV;
 }
 
-int dbgp_external_startup(struct usb_hcd *hcd)
-{
-	return xen_dbgp_external_startup(hcd) ?: _dbgp_external_startup();
-}
-EXPORT_SYMBOL_GPL(dbgp_external_startup);
-
 static int ehci_reset_port(int port)
 {
 	u32 portsc;
@@ -979,6 +974,7 @@
 	.index =	-1,
 };
 
+#if IS_ENABLED(CONFIG_USB_EHCI_HCD)
 int dbgp_reset_prep(struct usb_hcd *hcd)
 {
 	int ret = xen_dbgp_reset_prep(hcd);
@@ -1007,6 +1003,13 @@
 }
 EXPORT_SYMBOL_GPL(dbgp_reset_prep);
 
+int dbgp_external_startup(struct usb_hcd *hcd)
+{
+	return xen_dbgp_external_startup(hcd) ?: _dbgp_external_startup();
+}
+EXPORT_SYMBOL_GPL(dbgp_external_startup);
+#endif /* USB_EHCI_HCD */
+
 #ifdef CONFIG_KGDB
 
 static char kgdbdbgp_buf[DBGP_MAX_PACKET];
diff --git a/drivers/usb/host/ehci-ls1x.c b/drivers/usb/host/ehci-ls1x.c
index ca75965..aa0f328 100644
--- a/drivers/usb/host/ehci-ls1x.c
+++ b/drivers/usb/host/ehci-ls1x.c
@@ -113,7 +113,7 @@
 		goto err_put_hcd;
 	}
 
-	ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
+	ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
 	if (ret)
 		goto err_put_hcd;
 
diff --git a/drivers/usb/host/ohci-xls.c b/drivers/usb/host/ohci-xls.c
index 84201cd..41e378f 100644
--- a/drivers/usb/host/ohci-xls.c
+++ b/drivers/usb/host/ohci-xls.c
@@ -56,7 +56,7 @@
 		goto err3;
 	}
 
-	retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
+	retval = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
 	if (retval != 0)
 		goto err4;
 	return retval;
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index d0b87e7..b6b84da 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -707,11 +707,12 @@
 		fifo_count = musb_readw(epio, MUSB_RXCOUNT);
 
 		/*
-		 *  use mode 1 only if we expect data of at least ep packet_sz
-		 *  and have not yet received a short packet
+		 * Enable Mode 1 on RX transfers only when short_not_ok flag
+		 * is set. Currently short_not_ok flag is set only from
+		 * file_storage and f_mass_storage drivers
 		 */
-		if ((request->length - request->actual >= musb_ep->packet_sz) &&
-			(fifo_count >= musb_ep->packet_sz))
+
+		if (request->short_not_ok && fifo_count == musb_ep->packet_sz)
 			use_mode_1 = 1;
 		else
 			use_mode_1 = 0;
@@ -727,6 +728,27 @@
 				c = musb->dma_controller;
 				channel = musb_ep->dma;
 
+	/* We use DMA Req mode 0 in rx_csr, and DMA controller operates in
+	 * mode 0 only. So we do not get endpoint interrupts due to DMA
+	 * completion. We only get interrupts from DMA controller.
+	 *
+	 * We could operate in DMA mode 1 if we knew the size of the tranfer
+	 * in advance. For mass storage class, request->length = what the host
+	 * sends, so that'd work.  But for pretty much everything else,
+	 * request->length is routinely more than what the host sends. For
+	 * most these gadgets, end of is signified either by a short packet,
+	 * or filling the last byte of the buffer.  (Sending extra data in
+	 * that last pckate should trigger an overflow fault.)  But in mode 1,
+	 * we don't get DMA completion interrupt for short packets.
+	 *
+	 * Theoretically, we could enable DMAReq irq (MUSB_RXCSR_DMAMODE = 1),
+	 * to get endpoint interrupt on every DMA req, but that didn't seem
+	 * to work reliably.
+	 *
+	 * REVISIT an updated g_file_storage can set req->short_not_ok, which
+	 * then becomes usable as a runtime "use mode 1" hint...
+	 */
+
 				/* Experimental: Mode1 works with mass storage use cases */
 				if (use_mode_1) {
 					csr |= MUSB_RXCSR_AUTOCLEAR;
diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c
index d62a91f..0e62f50 100644
--- a/drivers/usb/musb/ux500.c
+++ b/drivers/usb/musb/ux500.c
@@ -65,7 +65,7 @@
 	struct platform_device		*musb;
 	struct ux500_glue		*glue;
 	struct clk			*clk;
-
+	int				musbid;
 	int				ret = -ENOMEM;
 
 	glue = kzalloc(sizeof(*glue), GFP_KERNEL);
diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
index d8c8a42..6223062 100644
--- a/drivers/usb/otg/Kconfig
+++ b/drivers/usb/otg/Kconfig
@@ -58,7 +58,7 @@
 
 config TWL4030_USB
 	tristate "TWL4030 USB Transceiver Driver"
-	depends on TWL4030_CORE && REGULATOR_TWL4030
+	depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
 	select USB_OTG_UTILS
 	help
 	  Enable this to support the USB OTG transceiver on TWL4030
@@ -68,7 +68,7 @@
 
 config TWL6030_USB
 	tristate "TWL6030 USB Transceiver Driver"
-	depends on TWL4030_CORE && OMAP_USB2
+	depends on TWL4030_CORE && OMAP_USB2 && USB_MUSB_OMAP2PLUS
 	select USB_OTG_UTILS
 	help
 	  Enable this to support the USB OTG transceiver on TWL6030
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index 7179b0c..cff8dd5 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -2430,7 +2430,7 @@
 static int keyspan_port_probe(struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
-	struct keyspan_port_private *s_priv;
+	struct keyspan_serial_private *s_priv;
 	struct keyspan_port_private *p_priv;
 	const struct keyspan_device_details *d_details;
 	struct callbacks *cback;
@@ -2445,7 +2445,6 @@
 	if (!p_priv)
 		return -ENOMEM;
 
-	s_priv = usb_get_serial_data(port->serial);
 	p_priv->device_details = d_details;
 
 	/* Setup values for the various callback routines */
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 5dee7d6..edc64bb 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -158,6 +158,7 @@
 #define NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_HIGHSPEED	0x8001
 #define NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_FULLSPEED	0x9000
 #define NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_HIGHSPEED	0x9001
+#define NOVATELWIRELESS_PRODUCT_E362		0x9010
 #define NOVATELWIRELESS_PRODUCT_G1		0xA001
 #define NOVATELWIRELESS_PRODUCT_G1_M		0xA002
 #define NOVATELWIRELESS_PRODUCT_G2		0xA010
@@ -193,6 +194,9 @@
 #define DELL_PRODUCT_5730_MINICARD_TELUS	0x8181
 #define DELL_PRODUCT_5730_MINICARD_VZW		0x8182
 
+#define DELL_PRODUCT_5800_MINICARD_VZW		0x8195  /* Novatel E362 */
+#define DELL_PRODUCT_5800_V2_MINICARD_VZW	0x8196  /* Novatel E362 */
+
 #define KYOCERA_VENDOR_ID			0x0c88
 #define KYOCERA_PRODUCT_KPC650			0x17da
 #define KYOCERA_PRODUCT_KPC680			0x180a
@@ -283,6 +287,7 @@
 /* ALCATEL PRODUCTS */
 #define ALCATEL_VENDOR_ID			0x1bbb
 #define ALCATEL_PRODUCT_X060S_X200		0x0000
+#define ALCATEL_PRODUCT_X220_X500D		0x0017
 
 #define PIRELLI_VENDOR_ID			0x1266
 #define PIRELLI_PRODUCT_C100_1			0x1002
@@ -706,6 +711,7 @@
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_G2) },
 	/* Novatel Ovation MC551 a.k.a. Verizon USB551L */
 	{ USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC551, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_E362, 0xff, 0xff, 0xff) },
 
 	{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01) },
 	{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01A) },
@@ -728,6 +734,8 @@
 	{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_SPRINT) },	/* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */
 	{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_TELUS) },	/* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */
 	{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_VZW) }, 	/* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */
+	{ USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, DELL_PRODUCT_5800_MINICARD_VZW, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, DELL_PRODUCT_5800_V2_MINICARD_VZW, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_E100A) },	/* ADU-E100, ADU-310 */
 	{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) },
 	{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_620UW) },
@@ -1157,6 +1165,7 @@
 	{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S_X200),
 	  .driver_info = (kernel_ulong_t)&alcatel_x200_blacklist
 	},
+	{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X220_X500D) },
 	{ USB_DEVICE(AIRPLUS_VENDOR_ID, AIRPLUS_PRODUCT_MCD650) },
 	{ USB_DEVICE(TLAYTECH_VENDOR_ID, TLAYTECH_PRODUCT_TEU800) },
 	{ USB_DEVICE(LONGCHEER_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W14),
diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c
index 61a73ad..a3e9c09 100644
--- a/drivers/usb/serial/usb_wwan.c
+++ b/drivers/usb/serial/usb_wwan.c
@@ -455,9 +455,6 @@
 	struct usb_serial *serial = port->serial;
 	struct urb *urb;
 
-	if (endpoint == -1)
-		return NULL;	/* endpoint not needed */
-
 	urb = usb_alloc_urb(0, GFP_KERNEL);	/* No ISO */
 	if (urb == NULL) {
 		dev_dbg(&serial->interface->dev,
@@ -489,6 +486,9 @@
 	init_usb_anchor(&portdata->delayed);
 
 	for (i = 0; i < N_IN_URB; i++) {
+		if (!port->bulk_in_size)
+			break;
+
 		buffer = (u8 *)__get_free_page(GFP_KERNEL);
 		if (!buffer)
 			goto bail_out_error;
@@ -502,8 +502,8 @@
 	}
 
 	for (i = 0; i < N_OUT_URB; i++) {
-		if (port->bulk_out_endpointAddress == -1)
-			continue;
+		if (!port->bulk_out_size)
+			break;
 
 		buffer = kmalloc(OUT_BUFLEN, GFP_KERNEL);
 		if (!buffer)
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index a3d5436..92f35ab 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -186,6 +186,12 @@
 		/* Some devices don't handle VPD pages correctly */
 		sdev->skip_vpd_pages = 1;
 
+		/* Do not attempt to use REPORT SUPPORTED OPERATION CODES */
+		sdev->no_report_opcodes = 1;
+
+		/* Do not attempt to use WRITE SAME */
+		sdev->no_write_same = 1;
+
 		/* Some disks return the total number of blocks in response
 		 * to READ CAPACITY rather than the highest block number.
 		 * If this device makes that mistake, tell the sd driver. */
diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c
index 99ac2cb..dedaf81 100644
--- a/drivers/vhost/vhost.c
+++ b/drivers/vhost/vhost.c
@@ -1076,7 +1076,7 @@
 		}
 		_iov = iov + ret;
 		size = reg->memory_size - addr + reg->guest_phys_addr;
-		_iov->iov_len = min((u64)len, size);
+		_iov->iov_len = min((u64)len - s, size);
 		_iov->iov_base = (void __user *)(unsigned long)
 			(reg->userspace_addr + addr - reg->guest_phys_addr);
 		s += size;
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index d64ac38..bee9284 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -365,11 +365,20 @@
 	struct omap_dss_output *out;
 	enum omap_dss_output_id	id;
 
-	id = module == 0 ? OMAP_DSS_OUTPUT_DSI1 : OMAP_DSS_OUTPUT_DSI2;
+	switch (module) {
+	case 0:
+		id = OMAP_DSS_OUTPUT_DSI1;
+		break;
+	case 1:
+		id = OMAP_DSS_OUTPUT_DSI2;
+		break;
+	default:
+		return NULL;
+	}
 
 	out = omap_dss_get_output(id);
 
-	return out->pdev;
+	return out ? out->pdev : NULL;
 }
 
 static inline void dsi_write_reg(struct platform_device *dsidev,
diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c
index 2ab1c3e..5f6eea8 100644
--- a/drivers/video/omap2/dss/dss.c
+++ b/drivers/video/omap2/dss/dss.c
@@ -697,11 +697,15 @@
 
 	dss.dss_clk = clk;
 
-	clk = clk_get(NULL, dss.feat->clk_name);
-	if (IS_ERR(clk)) {
-		DSSERR("Failed to get %s\n", dss.feat->clk_name);
-		r = PTR_ERR(clk);
-		goto err;
+	if (dss.feat->clk_name) {
+		clk = clk_get(NULL, dss.feat->clk_name);
+		if (IS_ERR(clk)) {
+			DSSERR("Failed to get %s\n", dss.feat->clk_name);
+			r = PTR_ERR(clk);
+			goto err;
+		}
+	} else {
+		clk = NULL;
 	}
 
 	dss.dpll4_m4_ck = clk;
@@ -805,10 +809,10 @@
 
 	if (cpu_is_omap24xx())
 		src = &omap24xx_dss_feats;
-	else if (cpu_is_omap34xx())
-		src = &omap34xx_dss_feats;
 	else if (cpu_is_omap3630())
 		src = &omap3630_dss_feats;
+	else if (cpu_is_omap34xx())
+		src = &omap34xx_dss_feats;
 	else if (cpu_is_omap44xx())
 		src = &omap44xx_dss_feats;
 	else if (soc_is_omap54xx())
diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c
index a48a7dd..8c9b8b3 100644
--- a/drivers/video/omap2/dss/hdmi.c
+++ b/drivers/video/omap2/dss/hdmi.c
@@ -644,8 +644,10 @@
 {
 	mutex_lock(&hdmi.lock);
 
-	if (hdmi_runtime_get())
+	if (hdmi_runtime_get()) {
+		mutex_unlock(&hdmi.lock);
 		return;
+	}
 
 	hdmi.ip_data.ops->dump_wrapper(&hdmi.ip_data, s);
 	hdmi.ip_data.ops->dump_pll(&hdmi.ip_data, s);
diff --git a/drivers/video/omap2/omapfb/omapfb-ioctl.c b/drivers/video/omap2/omapfb/omapfb-ioctl.c
index 606b89f..d630b26 100644
--- a/drivers/video/omap2/omapfb/omapfb-ioctl.c
+++ b/drivers/video/omap2/omapfb/omapfb-ioctl.c
@@ -787,7 +787,7 @@
 
 	case OMAPFB_WAITFORVSYNC:
 		DBG("ioctl WAITFORVSYNC\n");
-		if (!display && !display->output && !display->output->manager) {
+		if (!display || !display->output || !display->output->manager) {
 			r = -EINVAL;
 			break;
 		}
diff --git a/drivers/xen/privcmd.c b/drivers/xen/privcmd.c
index 8adb9cc..71f5c45 100644
--- a/drivers/xen/privcmd.c
+++ b/drivers/xen/privcmd.c
@@ -361,13 +361,13 @@
 	down_write(&mm->mmap_sem);
 
 	vma = find_vma(mm, m.addr);
-	ret = -EINVAL;
 	if (!vma ||
 	    vma->vm_ops != &privcmd_vm_ops ||
 	    (m.addr != vma->vm_start) ||
 	    ((m.addr + (nr_pages << PAGE_SHIFT)) != vma->vm_end) ||
 	    !privcmd_enforce_singleshot_mapping(vma)) {
 		up_write(&mm->mmap_sem);
+		ret = -EINVAL;
 		goto out;
 	}
 
@@ -383,12 +383,16 @@
 
 	up_write(&mm->mmap_sem);
 
-	if (state.global_error && (version == 1)) {
-		/* Write back errors in second pass. */
-		state.user_mfn = (xen_pfn_t *)m.arr;
-		state.err      = err_array;
-		ret = traverse_pages(m.num, sizeof(xen_pfn_t),
-				     &pagelist, mmap_return_errors_v1, &state);
+	if (version == 1) {
+		if (state.global_error) {
+			/* Write back errors in second pass. */
+			state.user_mfn = (xen_pfn_t *)m.arr;
+			state.err      = err_array;
+			ret = traverse_pages(m.num, sizeof(xen_pfn_t),
+					     &pagelist, mmap_return_errors_v1, &state);
+		} else
+			ret = 0;
+
 	} else if (version == 2) {
 		ret = __copy_to_user(m.err, err_array, m.num * sizeof(int));
 		if (ret)
diff --git a/fs/block_dev.c b/fs/block_dev.c
index 1a1e5e3..ab3a456 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -70,19 +70,6 @@
 	spin_unlock(&dst->wb.list_lock);
 }
 
-sector_t blkdev_max_block(struct block_device *bdev)
-{
-	sector_t retval = ~((sector_t)0);
-	loff_t sz = i_size_read(bdev->bd_inode);
-
-	if (sz) {
-		unsigned int size = block_size(bdev);
-		unsigned int sizebits = blksize_bits(size);
-		retval = (sz >> sizebits);
-	}
-	return retval;
-}
-
 /* Kill _all_ buffers and pagecache , dirty or not.. */
 void kill_bdev(struct block_device *bdev)
 {
@@ -116,8 +103,6 @@
 
 int set_blocksize(struct block_device *bdev, int size)
 {
-	struct address_space *mapping;
-
 	/* Size must be a power of two, and between 512 and PAGE_SIZE */
 	if (size > PAGE_SIZE || size < 512 || !is_power_of_2(size))
 		return -EINVAL;
@@ -126,19 +111,6 @@
 	if (size < bdev_logical_block_size(bdev))
 		return -EINVAL;
 
-	/* Prevent starting I/O or mapping the device */
-	percpu_down_write(&bdev->bd_block_size_semaphore);
-
-	/* Check that the block device is not memory mapped */
-	mapping = bdev->bd_inode->i_mapping;
-	mutex_lock(&mapping->i_mmap_mutex);
-	if (mapping_mapped(mapping)) {
-		mutex_unlock(&mapping->i_mmap_mutex);
-		percpu_up_write(&bdev->bd_block_size_semaphore);
-		return -EBUSY;
-	}
-	mutex_unlock(&mapping->i_mmap_mutex);
-
 	/* Don't change the size if it is same as current */
 	if (bdev->bd_block_size != size) {
 		sync_blockdev(bdev);
@@ -146,9 +118,6 @@
 		bdev->bd_inode->i_blkbits = blksize_bits(size);
 		kill_bdev(bdev);
 	}
-
-	percpu_up_write(&bdev->bd_block_size_semaphore);
-
 	return 0;
 }
 
@@ -181,52 +150,12 @@
 blkdev_get_block(struct inode *inode, sector_t iblock,
 		struct buffer_head *bh, int create)
 {
-	if (iblock >= blkdev_max_block(I_BDEV(inode))) {
-		if (create)
-			return -EIO;
-
-		/*
-		 * for reads, we're just trying to fill a partial page.
-		 * return a hole, they will have to call get_block again
-		 * before they can fill it, and they will get -EIO at that
-		 * time
-		 */
-		return 0;
-	}
 	bh->b_bdev = I_BDEV(inode);
 	bh->b_blocknr = iblock;
 	set_buffer_mapped(bh);
 	return 0;
 }
 
-static int
-blkdev_get_blocks(struct inode *inode, sector_t iblock,
-		struct buffer_head *bh, int create)
-{
-	sector_t end_block = blkdev_max_block(I_BDEV(inode));
-	unsigned long max_blocks = bh->b_size >> inode->i_blkbits;
-
-	if ((iblock + max_blocks) > end_block) {
-		max_blocks = end_block - iblock;
-		if ((long)max_blocks <= 0) {
-			if (create)
-				return -EIO;	/* write fully beyond EOF */
-			/*
-			 * It is a read which is fully beyond EOF.  We return
-			 * a !buffer_mapped buffer
-			 */
-			max_blocks = 0;
-		}
-	}
-
-	bh->b_bdev = I_BDEV(inode);
-	bh->b_blocknr = iblock;
-	bh->b_size = max_blocks << inode->i_blkbits;
-	if (max_blocks)
-		set_buffer_mapped(bh);
-	return 0;
-}
-
 static ssize_t
 blkdev_direct_IO(int rw, struct kiocb *iocb, const struct iovec *iov,
 			loff_t offset, unsigned long nr_segs)
@@ -235,7 +164,7 @@
 	struct inode *inode = file->f_mapping->host;
 
 	return __blockdev_direct_IO(rw, iocb, inode, I_BDEV(inode), iov, offset,
-				    nr_segs, blkdev_get_blocks, NULL, NULL, 0);
+				    nr_segs, blkdev_get_block, NULL, NULL, 0);
 }
 
 int __sync_blockdev(struct block_device *bdev, int wait)
@@ -459,12 +388,6 @@
 	struct bdev_inode *ei = kmem_cache_alloc(bdev_cachep, GFP_KERNEL);
 	if (!ei)
 		return NULL;
-
-	if (unlikely(percpu_init_rwsem(&ei->bdev.bd_block_size_semaphore))) {
-		kmem_cache_free(bdev_cachep, ei);
-		return NULL;
-	}
-
 	return &ei->vfs_inode;
 }
 
@@ -473,8 +396,6 @@
 	struct inode *inode = container_of(head, struct inode, i_rcu);
 	struct bdev_inode *bdi = BDEV_I(inode);
 
-	percpu_free_rwsem(&bdi->bdev.bd_block_size_semaphore);
-
 	kmem_cache_free(bdev_cachep, bdi);
 }
 
@@ -1593,22 +1514,6 @@
 	return blkdev_ioctl(bdev, mode, cmd, arg);
 }
 
-ssize_t blkdev_aio_read(struct kiocb *iocb, const struct iovec *iov,
-			unsigned long nr_segs, loff_t pos)
-{
-	ssize_t ret;
-	struct block_device *bdev = I_BDEV(iocb->ki_filp->f_mapping->host);
-
-	percpu_down_read(&bdev->bd_block_size_semaphore);
-
-	ret = generic_file_aio_read(iocb, iov, nr_segs, pos);
-
-	percpu_up_read(&bdev->bd_block_size_semaphore);
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(blkdev_aio_read);
-
 /*
  * Write data to the block device.  Only intended for the block device itself
  * and the raw driver which basically is a fake block device.
@@ -1620,16 +1525,12 @@
 			 unsigned long nr_segs, loff_t pos)
 {
 	struct file *file = iocb->ki_filp;
-	struct block_device *bdev = I_BDEV(file->f_mapping->host);
 	struct blk_plug plug;
 	ssize_t ret;
 
 	BUG_ON(iocb->ki_pos != pos);
 
 	blk_start_plug(&plug);
-
-	percpu_down_read(&bdev->bd_block_size_semaphore);
-
 	ret = __generic_file_aio_write(iocb, iov, nr_segs, &iocb->ki_pos);
 	if (ret > 0 || ret == -EIOCBQUEUED) {
 		ssize_t err;
@@ -1638,62 +1539,27 @@
 		if (err < 0 && ret > 0)
 			ret = err;
 	}
-
-	percpu_up_read(&bdev->bd_block_size_semaphore);
-
 	blk_finish_plug(&plug);
-
 	return ret;
 }
 EXPORT_SYMBOL_GPL(blkdev_aio_write);
 
-static int blkdev_mmap(struct file *file, struct vm_area_struct *vma)
+static ssize_t blkdev_aio_read(struct kiocb *iocb, const struct iovec *iov,
+			 unsigned long nr_segs, loff_t pos)
 {
-	int ret;
-	struct block_device *bdev = I_BDEV(file->f_mapping->host);
+	struct file *file = iocb->ki_filp;
+	struct inode *bd_inode = file->f_mapping->host;
+	loff_t size = i_size_read(bd_inode);
 
-	percpu_down_read(&bdev->bd_block_size_semaphore);
+	if (pos >= size)
+		return 0;
 
-	ret = generic_file_mmap(file, vma);
-
-	percpu_up_read(&bdev->bd_block_size_semaphore);
-
-	return ret;
+	size -= pos;
+	if (size < INT_MAX)
+		nr_segs = iov_shorten((struct iovec *)iov, nr_segs, size);
+	return generic_file_aio_read(iocb, iov, nr_segs, pos);
 }
 
-static ssize_t blkdev_splice_read(struct file *file, loff_t *ppos,
-				  struct pipe_inode_info *pipe, size_t len,
-				  unsigned int flags)
-{
-	ssize_t ret;
-	struct block_device *bdev = I_BDEV(file->f_mapping->host);
-
-	percpu_down_read(&bdev->bd_block_size_semaphore);
-
-	ret = generic_file_splice_read(file, ppos, pipe, len, flags);
-
-	percpu_up_read(&bdev->bd_block_size_semaphore);
-
-	return ret;
-}
-
-static ssize_t blkdev_splice_write(struct pipe_inode_info *pipe,
-				   struct file *file, loff_t *ppos, size_t len,
-				   unsigned int flags)
-{
-	ssize_t ret;
-	struct block_device *bdev = I_BDEV(file->f_mapping->host);
-
-	percpu_down_read(&bdev->bd_block_size_semaphore);
-
-	ret = generic_file_splice_write(pipe, file, ppos, len, flags);
-
-	percpu_up_read(&bdev->bd_block_size_semaphore);
-
-	return ret;
-}
-
-
 /*
  * Try to release a page associated with block device when the system
  * is under memory pressure.
@@ -1724,16 +1590,16 @@
 	.llseek		= block_llseek,
 	.read		= do_sync_read,
 	.write		= do_sync_write,
-  	.aio_read	= blkdev_aio_read,
+	.aio_read	= blkdev_aio_read,
 	.aio_write	= blkdev_aio_write,
-	.mmap		= blkdev_mmap,
+	.mmap		= generic_file_mmap,
 	.fsync		= blkdev_fsync,
 	.unlocked_ioctl	= block_ioctl,
 #ifdef CONFIG_COMPAT
 	.compat_ioctl	= compat_blkdev_ioctl,
 #endif
-	.splice_read	= blkdev_splice_read,
-	.splice_write	= blkdev_splice_write,
+	.splice_read	= generic_file_splice_read,
+	.splice_write	= generic_file_splice_write,
 };
 
 int ioctl_by_bdev(struct block_device *bdev, unsigned cmd, unsigned long arg)
diff --git a/fs/buffer.c b/fs/buffer.c
index b5f0442..ec0aca8 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -911,6 +911,18 @@
 	attach_page_buffers(page, head);
 }
 
+static sector_t blkdev_max_block(struct block_device *bdev, unsigned int size)
+{
+	sector_t retval = ~((sector_t)0);
+	loff_t sz = i_size_read(bdev->bd_inode);
+
+	if (sz) {
+		unsigned int sizebits = blksize_bits(size);
+		retval = (sz >> sizebits);
+	}
+	return retval;
+}
+
 /*
  * Initialise the state of a blockdev page's buffers.
  */ 
@@ -921,7 +933,7 @@
 	struct buffer_head *head = page_buffers(page);
 	struct buffer_head *bh = head;
 	int uptodate = PageUptodate(page);
-	sector_t end_block = blkdev_max_block(I_BDEV(bdev->bd_inode));
+	sector_t end_block = blkdev_max_block(I_BDEV(bdev->bd_inode), size);
 
 	do {
 		if (!buffer_mapped(bh)) {
@@ -1553,6 +1565,28 @@
 EXPORT_SYMBOL(unmap_underlying_metadata);
 
 /*
+ * Size is a power-of-two in the range 512..PAGE_SIZE,
+ * and the case we care about most is PAGE_SIZE.
+ *
+ * So this *could* possibly be written with those
+ * constraints in mind (relevant mostly if some
+ * architecture has a slow bit-scan instruction)
+ */
+static inline int block_size_bits(unsigned int blocksize)
+{
+	return ilog2(blocksize);
+}
+
+static struct buffer_head *create_page_buffers(struct page *page, struct inode *inode, unsigned int b_state)
+{
+	BUG_ON(!PageLocked(page));
+
+	if (!page_has_buffers(page))
+		create_empty_buffers(page, 1 << ACCESS_ONCE(inode->i_blkbits), b_state);
+	return page_buffers(page);
+}
+
+/*
  * NOTE! All mapped/uptodate combinations are valid:
  *
  *	Mapped	Uptodate	Meaning
@@ -1589,19 +1623,13 @@
 	sector_t block;
 	sector_t last_block;
 	struct buffer_head *bh, *head;
-	const unsigned blocksize = 1 << inode->i_blkbits;
+	unsigned int blocksize, bbits;
 	int nr_underway = 0;
 	int write_op = (wbc->sync_mode == WB_SYNC_ALL ?
 			WRITE_SYNC : WRITE);
 
-	BUG_ON(!PageLocked(page));
-
-	last_block = (i_size_read(inode) - 1) >> inode->i_blkbits;
-
-	if (!page_has_buffers(page)) {
-		create_empty_buffers(page, blocksize,
+	head = create_page_buffers(page, inode,
 					(1 << BH_Dirty)|(1 << BH_Uptodate));
-	}
 
 	/*
 	 * Be very careful.  We have no exclusion from __set_page_dirty_buffers
@@ -1613,9 +1641,12 @@
 	 * handle that here by just cleaning them.
 	 */
 
-	block = (sector_t)page->index << (PAGE_CACHE_SHIFT - inode->i_blkbits);
-	head = page_buffers(page);
 	bh = head;
+	blocksize = bh->b_size;
+	bbits = block_size_bits(blocksize);
+
+	block = (sector_t)page->index << (PAGE_CACHE_SHIFT - bbits);
+	last_block = (i_size_read(inode) - 1) >> bbits;
 
 	/*
 	 * Get all the dirty buffers mapped to disk addresses and
@@ -1806,12 +1837,10 @@
 	BUG_ON(to > PAGE_CACHE_SIZE);
 	BUG_ON(from > to);
 
-	blocksize = 1 << inode->i_blkbits;
-	if (!page_has_buffers(page))
-		create_empty_buffers(page, blocksize, 0);
-	head = page_buffers(page);
+	head = create_page_buffers(page, inode, 0);
+	blocksize = head->b_size;
+	bbits = block_size_bits(blocksize);
 
-	bbits = inode->i_blkbits;
 	block = (sector_t)page->index << (PAGE_CACHE_SHIFT - bbits);
 
 	for(bh = head, block_start = 0; bh != head || !block_start;
@@ -1881,11 +1910,11 @@
 	unsigned blocksize;
 	struct buffer_head *bh, *head;
 
-	blocksize = 1 << inode->i_blkbits;
+	bh = head = page_buffers(page);
+	blocksize = bh->b_size;
 
-	for(bh = head = page_buffers(page), block_start = 0;
-	    bh != head || !block_start;
-	    block_start=block_end, bh = bh->b_this_page) {
+	block_start = 0;
+	do {
 		block_end = block_start + blocksize;
 		if (block_end <= from || block_start >= to) {
 			if (!buffer_uptodate(bh))
@@ -1895,7 +1924,10 @@
 			mark_buffer_dirty(bh);
 		}
 		clear_buffer_new(bh);
-	}
+
+		block_start = block_end;
+		bh = bh->b_this_page;
+	} while (bh != head);
 
 	/*
 	 * If this is a partial write which happened to make all buffers
@@ -2020,7 +2052,6 @@
 int block_is_partially_uptodate(struct page *page, read_descriptor_t *desc,
 					unsigned long from)
 {
-	struct inode *inode = page->mapping->host;
 	unsigned block_start, block_end, blocksize;
 	unsigned to;
 	struct buffer_head *bh, *head;
@@ -2029,13 +2060,13 @@
 	if (!page_has_buffers(page))
 		return 0;
 
-	blocksize = 1 << inode->i_blkbits;
+	head = page_buffers(page);
+	blocksize = head->b_size;
 	to = min_t(unsigned, PAGE_CACHE_SIZE - from, desc->count);
 	to = from + to;
 	if (from < blocksize && to > PAGE_CACHE_SIZE - blocksize)
 		return 0;
 
-	head = page_buffers(page);
 	bh = head;
 	block_start = 0;
 	do {
@@ -2068,18 +2099,16 @@
 	struct inode *inode = page->mapping->host;
 	sector_t iblock, lblock;
 	struct buffer_head *bh, *head, *arr[MAX_BUF_PER_PAGE];
-	unsigned int blocksize;
+	unsigned int blocksize, bbits;
 	int nr, i;
 	int fully_mapped = 1;
 
-	BUG_ON(!PageLocked(page));
-	blocksize = 1 << inode->i_blkbits;
-	if (!page_has_buffers(page))
-		create_empty_buffers(page, blocksize, 0);
-	head = page_buffers(page);
+	head = create_page_buffers(page, inode, 0);
+	blocksize = head->b_size;
+	bbits = block_size_bits(blocksize);
 
-	iblock = (sector_t)page->index << (PAGE_CACHE_SHIFT - inode->i_blkbits);
-	lblock = (i_size_read(inode)+blocksize-1) >> inode->i_blkbits;
+	iblock = (sector_t)page->index << (PAGE_CACHE_SHIFT - bbits);
+	lblock = (i_size_read(inode)+blocksize-1) >> bbits;
 	bh = head;
 	nr = 0;
 	i = 0;
@@ -2864,6 +2893,55 @@
 	bio_put(bio);
 }
 
+/*
+ * This allows us to do IO even on the odd last sectors
+ * of a device, even if the bh block size is some multiple
+ * of the physical sector size.
+ *
+ * We'll just truncate the bio to the size of the device,
+ * and clear the end of the buffer head manually.
+ *
+ * Truly out-of-range accesses will turn into actual IO
+ * errors, this only handles the "we need to be able to
+ * do IO at the final sector" case.
+ */
+static void guard_bh_eod(int rw, struct bio *bio, struct buffer_head *bh)
+{
+	sector_t maxsector;
+	unsigned bytes;
+
+	maxsector = i_size_read(bio->bi_bdev->bd_inode) >> 9;
+	if (!maxsector)
+		return;
+
+	/*
+	 * If the *whole* IO is past the end of the device,
+	 * let it through, and the IO layer will turn it into
+	 * an EIO.
+	 */
+	if (unlikely(bio->bi_sector >= maxsector))
+		return;
+
+	maxsector -= bio->bi_sector;
+	bytes = bio->bi_size;
+	if (likely((bytes >> 9) <= maxsector))
+		return;
+
+	/* Uhhuh. We've got a bh that straddles the device size! */
+	bytes = maxsector << 9;
+
+	/* Truncate the bio.. */
+	bio->bi_size = bytes;
+	bio->bi_io_vec[0].bv_len = bytes;
+
+	/* ..and clear the end of the buffer for reads */
+	if ((rw & RW_MASK) == READ) {
+		void *kaddr = kmap_atomic(bh->b_page);
+		memset(kaddr + bh_offset(bh) + bytes, 0, bh->b_size - bytes);
+		kunmap_atomic(kaddr);
+	}
+}
+
 int submit_bh(int rw, struct buffer_head * bh)
 {
 	struct bio *bio;
@@ -2900,6 +2978,9 @@
 	bio->bi_end_io = end_bio_bh_io_sync;
 	bio->bi_private = bh;
 
+	/* Take care of bh's that straddle the end of the device */
+	guard_bh_eod(rw, bio, bh);
+
 	bio_get(bio);
 	submit_bio(rw, bio);
 
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index edb25b4..70b6f4c 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -1794,7 +1794,6 @@
 	struct TCP_Server_Info *server;
 	struct page *page;
 	int rc = 0;
-	loff_t isize = i_size_read(mapping->host);
 
 	/*
 	 * If wsize is smaller than the page cache size, default to writing
@@ -1899,7 +1898,7 @@
 			 */
 			set_page_writeback(page);
 
-			if (page_offset(page) >= isize) {
+			if (page_offset(page) >= i_size_read(mapping->host)) {
 				done = true;
 				unlock_page(page);
 				end_page_writeback(page);
@@ -1932,7 +1931,8 @@
 		wdata->offset = page_offset(wdata->pages[0]);
 		wdata->pagesz = PAGE_CACHE_SIZE;
 		wdata->tailsz =
-			min(isize - page_offset(wdata->pages[nr_pages - 1]),
+			min(i_size_read(mapping->host) -
+			    page_offset(wdata->pages[nr_pages - 1]),
 			    (loff_t)PAGE_CACHE_SIZE);
 		wdata->bytes = ((nr_pages - 1) * PAGE_CACHE_SIZE) +
 					wdata->tailsz;
diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c
index f9b5d3d..1c576e8 100644
--- a/fs/cifs/readdir.c
+++ b/fs/cifs/readdir.c
@@ -86,14 +86,17 @@
 
 	dentry = d_lookup(parent, name);
 	if (dentry) {
+		int err;
 		inode = dentry->d_inode;
 		/* update inode in place if i_ino didn't change */
 		if (inode && CIFS_I(inode)->uniqueid == fattr->cf_uniqueid) {
 			cifs_fattr_to_inode(inode, fattr);
 			return dentry;
 		}
-		d_drop(dentry);
+		err = d_invalidate(dentry);
 		dput(dentry);
+		if (err)
+			return NULL;
 	}
 
 	dentry = d_alloc(parent, name);
diff --git a/fs/cifs/smb1ops.c b/fs/cifs/smb1ops.c
index 56cc4be..34cea27 100644
--- a/fs/cifs/smb1ops.c
+++ b/fs/cifs/smb1ops.c
@@ -766,7 +766,6 @@
 	struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
 	struct tcon_link *tlink = NULL;
 	struct cifs_tcon *tcon;
-	FILE_BASIC_INFO info_buf;
 
 	/* if the file is already open for write, just use that fileid */
 	open_file = find_writable_file(cinode, true);
@@ -817,7 +816,7 @@
 	netpid = current->tgid;
 
 set_via_filehandle:
-	rc = CIFSSMBSetFileInfo(xid, tcon, &info_buf, netfid, netpid);
+	rc = CIFSSMBSetFileInfo(xid, tcon, buf, netfid, netpid);
 	if (!rc)
 		cinode->cifsAttrs = le32_to_cpu(buf->Attributes);
 
diff --git a/fs/direct-io.c b/fs/direct-io.c
index f86c720..cf5b44b 100644
--- a/fs/direct-io.c
+++ b/fs/direct-io.c
@@ -540,6 +540,7 @@
 	sector_t fs_endblk;	/* Into file, in filesystem-sized blocks */
 	unsigned long fs_count;	/* Number of filesystem-sized blocks */
 	int create;
+	unsigned int i_blkbits = sdio->blkbits + sdio->blkfactor;
 
 	/*
 	 * If there was a memory error and we've overwritten all the
@@ -554,7 +555,7 @@
 		fs_count = fs_endblk - fs_startblk + 1;
 
 		map_bh->b_state = 0;
-		map_bh->b_size = fs_count << dio->inode->i_blkbits;
+		map_bh->b_size = fs_count << i_blkbits;
 
 		/*
 		 * For writes inside i_size on a DIO_SKIP_HOLES filesystem we
@@ -1053,7 +1054,8 @@
 	int seg;
 	size_t size;
 	unsigned long addr;
-	unsigned blkbits = inode->i_blkbits;
+	unsigned i_blkbits = ACCESS_ONCE(inode->i_blkbits);
+	unsigned blkbits = i_blkbits;
 	unsigned blocksize_mask = (1 << blkbits) - 1;
 	ssize_t retval = -EINVAL;
 	loff_t end = offset;
@@ -1149,7 +1151,7 @@
 	dio->inode = inode;
 	dio->rw = rw;
 	sdio.blkbits = blkbits;
-	sdio.blkfactor = inode->i_blkbits - blkbits;
+	sdio.blkfactor = i_blkbits - blkbits;
 	sdio.block_in_file = offset >> blkbits;
 
 	sdio.get_block = get_block;
diff --git a/fs/ext3/balloc.c b/fs/ext3/balloc.c
index 7320a66..22548f5 100644
--- a/fs/ext3/balloc.c
+++ b/fs/ext3/balloc.c
@@ -2101,8 +2101,9 @@
 	end = start + (range->len >> sb->s_blocksize_bits) - 1;
 	minlen = range->minlen >> sb->s_blocksize_bits;
 
-	if (unlikely(minlen > EXT3_BLOCKS_PER_GROUP(sb)) ||
-	    unlikely(start >= max_blks))
+	if (minlen > EXT3_BLOCKS_PER_GROUP(sb) ||
+	    start >= max_blks ||
+	    range->len < sb->s_blocksize)
 		return -EINVAL;
 	if (end >= max_blks)
 		end = max_blks - 1;
diff --git a/fs/file.c b/fs/file.c
index 708d997..eff2316 100644
--- a/fs/file.c
+++ b/fs/file.c
@@ -685,7 +685,6 @@
 	struct fdtable *fdt;
 
 	/* exec unshares first */
-	BUG_ON(atomic_read(&files->count) != 1);
 	spin_lock(&files->file_lock);
 	for (i = 0; ; i++) {
 		unsigned long set;
@@ -995,16 +994,18 @@
 		const void *p)
 {
 	struct fdtable *fdt;
-	struct file *file;
 	int res = 0;
 	if (!files)
 		return 0;
 	spin_lock(&files->file_lock);
-	fdt = files_fdtable(files);
-	while (!res && n < fdt->max_fds) {
-		file = rcu_dereference_check_fdtable(files, fdt->fd[n++]);
-		if (file)
-			res = f(p, file, n);
+	for (fdt = files_fdtable(files); n < fdt->max_fds; n++) {
+		struct file *file;
+		file = rcu_dereference_check_fdtable(files, fdt->fd[n]);
+		if (!file)
+			continue;
+		res = f(p, file, n);
+		if (res)
+			break;
 	}
 	spin_unlock(&files->file_lock);
 	return res;
diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c
index 51ea267..3e3422f 100644
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -228,6 +228,8 @@
 static void inode_sync_complete(struct inode *inode)
 {
 	inode->i_state &= ~I_SYNC;
+	/* If inode is clean an unused, put it into LRU now... */
+	inode_add_lru(inode);
 	/* Waiters must see I_SYNC cleared before being woken up */
 	smp_mb();
 	wake_up_bit(&inode->i_state, __I_SYNC);
diff --git a/fs/inode.c b/fs/inode.c
index b03c719..64999f1 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -408,6 +408,19 @@
 	spin_unlock(&inode->i_sb->s_inode_lru_lock);
 }
 
+/*
+ * Add inode to LRU if needed (inode is unused and clean).
+ *
+ * Needs inode->i_lock held.
+ */
+void inode_add_lru(struct inode *inode)
+{
+	if (!(inode->i_state & (I_DIRTY | I_SYNC | I_FREEING | I_WILL_FREE)) &&
+	    !atomic_read(&inode->i_count) && inode->i_sb->s_flags & MS_ACTIVE)
+		inode_lru_list_add(inode);
+}
+
+
 static void inode_lru_list_del(struct inode *inode)
 {
 	spin_lock(&inode->i_sb->s_inode_lru_lock);
@@ -1390,8 +1403,7 @@
 
 	if (!drop && (sb->s_flags & MS_ACTIVE)) {
 		inode->i_state |= I_REFERENCED;
-		if (!(inode->i_state & (I_DIRTY|I_SYNC)))
-			inode_lru_list_add(inode);
+		inode_add_lru(inode);
 		spin_unlock(&inode->i_lock);
 		return;
 	}
diff --git a/fs/internal.h b/fs/internal.h
index 916b7cb..2f6af7f 100644
--- a/fs/internal.h
+++ b/fs/internal.h
@@ -110,6 +110,7 @@
  * inode.c
  */
 extern spinlock_t inode_sb_list_lock;
+extern void inode_add_lru(struct inode *inode);
 
 /*
  * fs-writeback.c
diff --git a/fs/jbd/transaction.c b/fs/jbd/transaction.c
index 78b7f84..7f5120b 100644
--- a/fs/jbd/transaction.c
+++ b/fs/jbd/transaction.c
@@ -1961,7 +1961,9 @@
 			spin_unlock(&journal->j_list_lock);
 			jbd_unlock_bh_state(bh);
 			spin_unlock(&journal->j_state_lock);
+			unlock_buffer(bh);
 			log_wait_commit(journal, tid);
+			lock_buffer(bh);
 			goto retry;
 		}
 		/*
diff --git a/fs/jffs2/file.c b/fs/jffs2/file.c
index 60ef3fb..1506673 100644
--- a/fs/jffs2/file.c
+++ b/fs/jffs2/file.c
@@ -138,33 +138,39 @@
 	struct page *pg;
 	struct inode *inode = mapping->host;
 	struct jffs2_inode_info *f = JFFS2_INODE_INFO(inode);
+	struct jffs2_sb_info *c = JFFS2_SB_INFO(inode->i_sb);
+	struct jffs2_raw_inode ri;
+	uint32_t alloc_len = 0;
 	pgoff_t index = pos >> PAGE_CACHE_SHIFT;
 	uint32_t pageofs = index << PAGE_CACHE_SHIFT;
 	int ret = 0;
 
-	pg = grab_cache_page_write_begin(mapping, index, flags);
-	if (!pg)
-		return -ENOMEM;
-	*pagep = pg;
-
 	jffs2_dbg(1, "%s()\n", __func__);
 
 	if (pageofs > inode->i_size) {
+		ret = jffs2_reserve_space(c, sizeof(ri), &alloc_len,
+					  ALLOC_NORMAL, JFFS2_SUMMARY_INODE_SIZE);
+		if (ret)
+			return ret;
+	}
+
+	mutex_lock(&f->sem);
+	pg = grab_cache_page_write_begin(mapping, index, flags);
+	if (!pg) {
+		if (alloc_len)
+			jffs2_complete_reservation(c);
+		mutex_unlock(&f->sem);
+		return -ENOMEM;
+	}
+	*pagep = pg;
+
+	if (alloc_len) {
 		/* Make new hole frag from old EOF to new page */
-		struct jffs2_sb_info *c = JFFS2_SB_INFO(inode->i_sb);
-		struct jffs2_raw_inode ri;
 		struct jffs2_full_dnode *fn;
-		uint32_t alloc_len;
 
 		jffs2_dbg(1, "Writing new hole frag 0x%x-0x%x between current EOF and new page\n",
 			  (unsigned int)inode->i_size, pageofs);
 
-		ret = jffs2_reserve_space(c, sizeof(ri), &alloc_len,
-					  ALLOC_NORMAL, JFFS2_SUMMARY_INODE_SIZE);
-		if (ret)
-			goto out_page;
-
-		mutex_lock(&f->sem);
 		memset(&ri, 0, sizeof(ri));
 
 		ri.magic = cpu_to_je16(JFFS2_MAGIC_BITMASK);
@@ -191,7 +197,6 @@
 		if (IS_ERR(fn)) {
 			ret = PTR_ERR(fn);
 			jffs2_complete_reservation(c);
-			mutex_unlock(&f->sem);
 			goto out_page;
 		}
 		ret = jffs2_add_full_dnode_to_inode(c, f, fn);
@@ -206,12 +211,10 @@
 			jffs2_mark_node_obsolete(c, fn->raw);
 			jffs2_free_full_dnode(fn);
 			jffs2_complete_reservation(c);
-			mutex_unlock(&f->sem);
 			goto out_page;
 		}
 		jffs2_complete_reservation(c);
 		inode->i_size = pageofs;
-		mutex_unlock(&f->sem);
 	}
 
 	/*
@@ -220,18 +223,18 @@
 	 * case of a short-copy.
 	 */
 	if (!PageUptodate(pg)) {
-		mutex_lock(&f->sem);
 		ret = jffs2_do_readpage_nolock(inode, pg);
-		mutex_unlock(&f->sem);
 		if (ret)
 			goto out_page;
 	}
+	mutex_unlock(&f->sem);
 	jffs2_dbg(1, "end write_begin(). pg->flags %lx\n", pg->flags);
 	return ret;
 
 out_page:
 	unlock_page(pg);
 	page_cache_release(pg);
+	mutex_unlock(&f->sem);
 	return ret;
 }
 
diff --git a/fs/namei.c b/fs/namei.c
index 937f9d5..5f4cdf3 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -2131,6 +2131,11 @@
 	if (!len)
 		return ERR_PTR(-EACCES);
 
+	if (unlikely(name[0] == '.')) {
+		if (len < 2 || (len == 2 && name[1] == '.'))
+			return ERR_PTR(-EACCES);
+	}
+
 	while (len--) {
 		c = *(const unsigned char *)name++;
 		if (c == '/' || c == '\0')
diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c
index ce8cb92..b9e66b7 100644
--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -450,7 +450,8 @@
 			nfs_refresh_inode(dentry->d_inode, entry->fattr);
 			goto out;
 		} else {
-			d_drop(dentry);
+			if (d_invalidate(dentry) != 0)
+				goto out;
 			dput(dentry);
 		}
 	}
@@ -1100,6 +1101,8 @@
 out_zap_parent:
 	nfs_zap_caches(dir);
  out_bad:
+	nfs_free_fattr(fattr);
+	nfs_free_fhandle(fhandle);
 	nfs_mark_for_revalidate(dir);
 	if (inode && S_ISDIR(inode->i_mode)) {
 		/* Purge readdir caches. */
@@ -1112,8 +1115,6 @@
 		shrink_dcache_parent(dentry);
 	}
 	d_drop(dentry);
-	nfs_free_fattr(fattr);
-	nfs_free_fhandle(fhandle);
 	dput(parent);
 	dfprintk(LOOKUPCACHE, "NFS: %s(%s/%s) is invalid\n",
 			__func__, dentry->d_parent->d_name.name,
diff --git a/fs/notify/fanotify/fanotify_user.c b/fs/notify/fanotify/fanotify_user.c
index 721d692..6fcaeb8 100644
--- a/fs/notify/fanotify/fanotify_user.c
+++ b/fs/notify/fanotify/fanotify_user.c
@@ -258,7 +258,8 @@
 	if (ret)
 		goto out_close_fd;
 
-	fd_install(fd, f);
+	if (fd != FAN_NOFD)
+		fd_install(fd, f);
 	return fanotify_event_metadata.event_len;
 
 out_close_fd:
diff --git a/fs/proc/base.c b/fs/proc/base.c
index 144a967..9e28356 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -873,6 +873,113 @@
 	.release	= mem_release,
 };
 
+static ssize_t oom_adj_read(struct file *file, char __user *buf, size_t count,
+			    loff_t *ppos)
+{
+	struct task_struct *task = get_proc_task(file->f_path.dentry->d_inode);
+	char buffer[PROC_NUMBUF];
+	int oom_adj = OOM_ADJUST_MIN;
+	size_t len;
+	unsigned long flags;
+
+	if (!task)
+		return -ESRCH;
+	if (lock_task_sighand(task, &flags)) {
+		if (task->signal->oom_score_adj == OOM_SCORE_ADJ_MAX)
+			oom_adj = OOM_ADJUST_MAX;
+		else
+			oom_adj = (task->signal->oom_score_adj * -OOM_DISABLE) /
+				  OOM_SCORE_ADJ_MAX;
+		unlock_task_sighand(task, &flags);
+	}
+	put_task_struct(task);
+	len = snprintf(buffer, sizeof(buffer), "%d\n", oom_adj);
+	return simple_read_from_buffer(buf, count, ppos, buffer, len);
+}
+
+static ssize_t oom_adj_write(struct file *file, const char __user *buf,
+			     size_t count, loff_t *ppos)
+{
+	struct task_struct *task;
+	char buffer[PROC_NUMBUF];
+	int oom_adj;
+	unsigned long flags;
+	int err;
+
+	memset(buffer, 0, sizeof(buffer));
+	if (count > sizeof(buffer) - 1)
+		count = sizeof(buffer) - 1;
+	if (copy_from_user(buffer, buf, count)) {
+		err = -EFAULT;
+		goto out;
+	}
+
+	err = kstrtoint(strstrip(buffer), 0, &oom_adj);
+	if (err)
+		goto out;
+	if ((oom_adj < OOM_ADJUST_MIN || oom_adj > OOM_ADJUST_MAX) &&
+	     oom_adj != OOM_DISABLE) {
+		err = -EINVAL;
+		goto out;
+	}
+
+	task = get_proc_task(file->f_path.dentry->d_inode);
+	if (!task) {
+		err = -ESRCH;
+		goto out;
+	}
+
+	task_lock(task);
+	if (!task->mm) {
+		err = -EINVAL;
+		goto err_task_lock;
+	}
+
+	if (!lock_task_sighand(task, &flags)) {
+		err = -ESRCH;
+		goto err_task_lock;
+	}
+
+	/*
+	 * Scale /proc/pid/oom_score_adj appropriately ensuring that a maximum
+	 * value is always attainable.
+	 */
+	if (oom_adj == OOM_ADJUST_MAX)
+		oom_adj = OOM_SCORE_ADJ_MAX;
+	else
+		oom_adj = (oom_adj * OOM_SCORE_ADJ_MAX) / -OOM_DISABLE;
+
+	if (oom_adj < task->signal->oom_score_adj &&
+	    !capable(CAP_SYS_RESOURCE)) {
+		err = -EACCES;
+		goto err_sighand;
+	}
+
+	/*
+	 * /proc/pid/oom_adj is provided for legacy purposes, ask users to use
+	 * /proc/pid/oom_score_adj instead.
+	 */
+	printk_once(KERN_WARNING "%s (%d): /proc/%d/oom_adj is deprecated, please use /proc/%d/oom_score_adj instead.\n",
+		  current->comm, task_pid_nr(current), task_pid_nr(task),
+		  task_pid_nr(task));
+
+	task->signal->oom_score_adj = oom_adj;
+	trace_oom_score_adj_update(task);
+err_sighand:
+	unlock_task_sighand(task, &flags);
+err_task_lock:
+	task_unlock(task);
+	put_task_struct(task);
+out:
+	return err < 0 ? err : count;
+}
+
+static const struct file_operations proc_oom_adj_operations = {
+	.read		= oom_adj_read,
+	.write		= oom_adj_write,
+	.llseek		= generic_file_llseek,
+};
+
 static ssize_t oom_score_adj_read(struct file *file, char __user *buf,
 					size_t count, loff_t *ppos)
 {
@@ -1770,8 +1877,9 @@
 	if (!vma)
 		goto out_no_vma;
 
-	result = proc_map_files_instantiate(dir, dentry, task,
-			(void *)(unsigned long)vma->vm_file->f_mode);
+	if (vma->vm_file)
+		result = proc_map_files_instantiate(dir, dentry, task,
+				(void *)(unsigned long)vma->vm_file->f_mode);
 
 out_no_vma:
 	up_read(&mm->mmap_sem);
@@ -2598,6 +2706,7 @@
 	REG("cgroup",  S_IRUGO, proc_cgroup_operations),
 #endif
 	INF("oom_score",  S_IRUGO, proc_oom_score),
+	REG("oom_adj",    S_IRUGO|S_IWUSR, proc_oom_adj_operations),
 	REG("oom_score_adj", S_IRUGO|S_IWUSR, proc_oom_score_adj_operations),
 #ifdef CONFIG_AUDITSYSCALL
 	REG("loginuid",   S_IWUSR|S_IRUGO, proc_loginuid_operations),
@@ -2964,6 +3073,7 @@
 	REG("cgroup",  S_IRUGO, proc_cgroup_operations),
 #endif
 	INF("oom_score", S_IRUGO, proc_oom_score),
+	REG("oom_adj",   S_IRUGO|S_IWUSR, proc_oom_adj_operations),
 	REG("oom_score_adj", S_IRUGO|S_IWUSR, proc_oom_score_adj_operations),
 #ifdef CONFIG_AUDITSYSCALL
 	REG("loginuid",  S_IWUSR|S_IRUGO, proc_loginuid_operations),
diff --git a/fs/pstore/platform.c b/fs/pstore/platform.c
index a40da07..947fbe0 100644
--- a/fs/pstore/platform.c
+++ b/fs/pstore/platform.c
@@ -161,6 +161,7 @@
 
 	while (s < e) {
 		unsigned long flags;
+		u64 id;
 
 		if (c > psinfo->bufsize)
 			c = psinfo->bufsize;
@@ -172,7 +173,7 @@
 			spin_lock_irqsave(&psinfo->buf_lock, flags);
 		}
 		memcpy(psinfo->buf, s, c);
-		psinfo->write(PSTORE_TYPE_CONSOLE, 0, NULL, 0, c, psinfo);
+		psinfo->write(PSTORE_TYPE_CONSOLE, 0, &id, 0, c, psinfo);
 		spin_unlock_irqrestore(&psinfo->buf_lock, flags);
 		s += c;
 		c = e - s;
diff --git a/fs/reiserfs/inode.c b/fs/reiserfs/inode.c
index f27f01a..d83736f 100644
--- a/fs/reiserfs/inode.c
+++ b/fs/reiserfs/inode.c
@@ -1782,8 +1782,9 @@
 
 	BUG_ON(!th->t_trans_id);
 
-	dquot_initialize(inode);
+	reiserfs_write_unlock(inode->i_sb);
 	err = dquot_alloc_inode(inode);
+	reiserfs_write_lock(inode->i_sb);
 	if (err)
 		goto out_end_trans;
 	if (!dir->i_nlink) {
@@ -1979,8 +1980,10 @@
 
       out_end_trans:
 	journal_end(th, th->t_super, th->t_blocks_allocated);
+	reiserfs_write_unlock(inode->i_sb);
 	/* Drop can be outside and it needs more credits so it's better to have it outside */
 	dquot_drop(inode);
+	reiserfs_write_lock(inode->i_sb);
 	inode->i_flags |= S_NOQUOTA;
 	make_bad_inode(inode);
 
@@ -3103,10 +3106,9 @@
 	/* must be turned off for recursive notify_change calls */
 	ia_valid = attr->ia_valid &= ~(ATTR_KILL_SUID|ATTR_KILL_SGID);
 
-	depth = reiserfs_write_lock_once(inode->i_sb);
 	if (is_quota_modification(inode, attr))
 		dquot_initialize(inode);
-
+	depth = reiserfs_write_lock_once(inode->i_sb);
 	if (attr->ia_valid & ATTR_SIZE) {
 		/* version 2 items will be caught by the s_maxbytes check
 		 ** done for us in vmtruncate
@@ -3170,7 +3172,9 @@
 		error = journal_begin(&th, inode->i_sb, jbegin_count);
 		if (error)
 			goto out;
+		reiserfs_write_unlock_once(inode->i_sb, depth);
 		error = dquot_transfer(inode, attr);
+		depth = reiserfs_write_lock_once(inode->i_sb);
 		if (error) {
 			journal_end(&th, inode->i_sb, jbegin_count);
 			goto out;
diff --git a/fs/reiserfs/stree.c b/fs/reiserfs/stree.c
index f8afa4b..2f40a4c 100644
--- a/fs/reiserfs/stree.c
+++ b/fs/reiserfs/stree.c
@@ -1968,7 +1968,9 @@
 		       key2type(&(key->on_disk_key)));
 #endif
 
+	reiserfs_write_unlock(inode->i_sb);
 	retval = dquot_alloc_space_nodirty(inode, pasted_size);
+	reiserfs_write_lock(inode->i_sb);
 	if (retval) {
 		pathrelse(search_path);
 		return retval;
@@ -2061,9 +2063,11 @@
 			       "reiserquota insert_item(): allocating %u id=%u type=%c",
 			       quota_bytes, inode->i_uid, head2type(ih));
 #endif
+		reiserfs_write_unlock(inode->i_sb);
 		/* We can't dirty inode here. It would be immediately written but
 		 * appropriate stat item isn't inserted yet... */
 		retval = dquot_alloc_space_nodirty(inode, quota_bytes);
+		reiserfs_write_lock(inode->i_sb);
 		if (retval) {
 			pathrelse(path);
 			return retval;
diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c
index 1078ae1..418bdc3 100644
--- a/fs/reiserfs/super.c
+++ b/fs/reiserfs/super.c
@@ -298,7 +298,9 @@
 			retval = remove_save_link_only(s, &save_link_key, 0);
 			continue;
 		}
+		reiserfs_write_unlock(s);
 		dquot_initialize(inode);
+		reiserfs_write_lock(s);
 
 		if (truncate && S_ISDIR(inode->i_mode)) {
 			/* We got a truncate request for a dir which is impossible.
@@ -1335,7 +1337,7 @@
 				kfree(qf_names[i]);
 #endif
 		err = -EINVAL;
-		goto out_err;
+		goto out_unlock;
 	}
 #ifdef CONFIG_QUOTA
 	handle_quota_files(s, qf_names, &qfmt);
@@ -1379,7 +1381,7 @@
 	if (blocks) {
 		err = reiserfs_resize(s, blocks);
 		if (err != 0)
-			goto out_err;
+			goto out_unlock;
 	}
 
 	if (*mount_flags & MS_RDONLY) {
@@ -1389,9 +1391,15 @@
 			/* it is read-only already */
 			goto out_ok;
 
+		/*
+		 * Drop write lock. Quota will retake it when needed and lock
+		 * ordering requires calling dquot_suspend() without it.
+		 */
+		reiserfs_write_unlock(s);
 		err = dquot_suspend(s, -1);
 		if (err < 0)
 			goto out_err;
+		reiserfs_write_lock(s);
 
 		/* try to remount file system with read-only permissions */
 		if (sb_umount_state(rs) == REISERFS_VALID_FS
@@ -1401,7 +1409,7 @@
 
 		err = journal_begin(&th, s, 10);
 		if (err)
-			goto out_err;
+			goto out_unlock;
 
 		/* Mounting a rw partition read-only. */
 		reiserfs_prepare_for_journal(s, SB_BUFFER_WITH_SB(s), 1);
@@ -1416,7 +1424,7 @@
 
 		if (reiserfs_is_journal_aborted(journal)) {
 			err = journal->j_errno;
-			goto out_err;
+			goto out_unlock;
 		}
 
 		handle_data_mode(s, mount_options);
@@ -1425,7 +1433,7 @@
 		s->s_flags &= ~MS_RDONLY;	/* now it is safe to call journal_begin */
 		err = journal_begin(&th, s, 10);
 		if (err)
-			goto out_err;
+			goto out_unlock;
 
 		/* Mount a partition which is read-only, read-write */
 		reiserfs_prepare_for_journal(s, SB_BUFFER_WITH_SB(s), 1);
@@ -1442,10 +1450,16 @@
 	SB_JOURNAL(s)->j_must_wait = 1;
 	err = journal_end(&th, s, 10);
 	if (err)
-		goto out_err;
+		goto out_unlock;
 
 	if (!(*mount_flags & MS_RDONLY)) {
+		/*
+		 * Drop write lock. Quota will retake it when needed and lock
+		 * ordering requires calling dquot_resume() without it.
+		 */
+		reiserfs_write_unlock(s);
 		dquot_resume(s, -1);
+		reiserfs_write_lock(s);
 		finish_unfinished(s);
 		reiserfs_xattr_init(s, *mount_flags);
 	}
@@ -1455,9 +1469,10 @@
 	reiserfs_write_unlock(s);
 	return 0;
 
+out_unlock:
+	reiserfs_write_unlock(s);
 out_err:
 	kfree(new_opts);
-	reiserfs_write_unlock(s);
 	return err;
 }
 
@@ -2095,13 +2110,15 @@
 			  REISERFS_QUOTA_TRANS_BLOCKS(dquot->dq_sb));
 	if (ret)
 		goto out;
+	reiserfs_write_unlock(dquot->dq_sb);
 	ret = dquot_commit(dquot);
+	reiserfs_write_lock(dquot->dq_sb);
 	err =
 	    journal_end(&th, dquot->dq_sb,
 			REISERFS_QUOTA_TRANS_BLOCKS(dquot->dq_sb));
 	if (!ret && err)
 		ret = err;
-      out:
+out:
 	reiserfs_write_unlock(dquot->dq_sb);
 	return ret;
 }
@@ -2117,13 +2134,15 @@
 			  REISERFS_QUOTA_INIT_BLOCKS(dquot->dq_sb));
 	if (ret)
 		goto out;
+	reiserfs_write_unlock(dquot->dq_sb);
 	ret = dquot_acquire(dquot);
+	reiserfs_write_lock(dquot->dq_sb);
 	err =
 	    journal_end(&th, dquot->dq_sb,
 			REISERFS_QUOTA_INIT_BLOCKS(dquot->dq_sb));
 	if (!ret && err)
 		ret = err;
-      out:
+out:
 	reiserfs_write_unlock(dquot->dq_sb);
 	return ret;
 }
@@ -2137,19 +2156,21 @@
 	ret =
 	    journal_begin(&th, dquot->dq_sb,
 			  REISERFS_QUOTA_DEL_BLOCKS(dquot->dq_sb));
+	reiserfs_write_unlock(dquot->dq_sb);
 	if (ret) {
 		/* Release dquot anyway to avoid endless cycle in dqput() */
 		dquot_release(dquot);
 		goto out;
 	}
 	ret = dquot_release(dquot);
+	reiserfs_write_lock(dquot->dq_sb);
 	err =
 	    journal_end(&th, dquot->dq_sb,
 			REISERFS_QUOTA_DEL_BLOCKS(dquot->dq_sb));
 	if (!ret && err)
 		ret = err;
-      out:
 	reiserfs_write_unlock(dquot->dq_sb);
+out:
 	return ret;
 }
 
@@ -2174,11 +2195,13 @@
 	ret = journal_begin(&th, sb, 2);
 	if (ret)
 		goto out;
+	reiserfs_write_unlock(sb);
 	ret = dquot_commit_info(sb, type);
+	reiserfs_write_lock(sb);
 	err = journal_end(&th, sb, 2);
 	if (!ret && err)
 		ret = err;
-      out:
+out:
 	reiserfs_write_unlock(sb);
 	return ret;
 }
@@ -2203,8 +2226,11 @@
 	struct reiserfs_transaction_handle th;
 	int opt = type == USRQUOTA ? REISERFS_USRQUOTA : REISERFS_GRPQUOTA;
 
-	if (!(REISERFS_SB(sb)->s_mount_opt & (1 << opt)))
-		return -EINVAL;
+	reiserfs_write_lock(sb);
+	if (!(REISERFS_SB(sb)->s_mount_opt & (1 << opt))) {
+		err = -EINVAL;
+		goto out;
+	}
 
 	/* Quotafile not on the same filesystem? */
 	if (path->dentry->d_sb != sb) {
@@ -2246,8 +2272,10 @@
 		if (err)
 			goto out;
 	}
-	err = dquot_quota_on(sb, type, format_id, path);
+	reiserfs_write_unlock(sb);
+	return dquot_quota_on(sb, type, format_id, path);
 out:
+	reiserfs_write_unlock(sb);
 	return err;
 }
 
@@ -2320,7 +2348,9 @@
 		tocopy = sb->s_blocksize - offset < towrite ?
 		    sb->s_blocksize - offset : towrite;
 		tmp_bh.b_state = 0;
+		reiserfs_write_lock(sb);
 		err = reiserfs_get_block(inode, blk, &tmp_bh, GET_BLOCK_CREATE);
+		reiserfs_write_unlock(sb);
 		if (err)
 			goto out;
 		if (offset || tocopy != sb->s_blocksize)
@@ -2336,10 +2366,12 @@
 		flush_dcache_page(bh->b_page);
 		set_buffer_uptodate(bh);
 		unlock_buffer(bh);
+		reiserfs_write_lock(sb);
 		reiserfs_prepare_for_journal(sb, bh, 1);
 		journal_mark_dirty(current->journal_info, sb, bh);
 		if (!journal_quota)
 			reiserfs_add_ordered_list(inode, bh);
+		reiserfs_write_unlock(sb);
 		brelse(bh);
 		offset = 0;
 		towrite -= tocopy;
diff --git a/fs/ubifs/find.c b/fs/ubifs/find.c
index 28ec13a..2dcf3d4 100644
--- a/fs/ubifs/find.c
+++ b/fs/ubifs/find.c
@@ -681,8 +681,16 @@
 	if (!lprops) {
 		lprops = ubifs_fast_find_freeable(c);
 		if (!lprops) {
-			ubifs_assert(c->freeable_cnt == 0);
-			if (c->lst.empty_lebs - c->lst.taken_empty_lebs > 0) {
+			/*
+			 * The first condition means the following: go scan the
+			 * LPT if there are uncategorized lprops, which means
+			 * there may be freeable LEBs there (UBIFS does not
+			 * store the information about freeable LEBs in the
+			 * master node).
+			 */
+			if (c->in_a_category_cnt != c->main_lebs ||
+			    c->lst.empty_lebs - c->lst.taken_empty_lebs > 0) {
+				ubifs_assert(c->freeable_cnt == 0);
 				lprops = scan_for_leb_for_idx(c);
 				if (IS_ERR(lprops)) {
 					err = PTR_ERR(lprops);
diff --git a/fs/ubifs/lprops.c b/fs/ubifs/lprops.c
index e5a2a35..46190a7 100644
--- a/fs/ubifs/lprops.c
+++ b/fs/ubifs/lprops.c
@@ -300,8 +300,11 @@
 	default:
 		ubifs_assert(0);
 	}
+
 	lprops->flags &= ~LPROPS_CAT_MASK;
 	lprops->flags |= cat;
+	c->in_a_category_cnt += 1;
+	ubifs_assert(c->in_a_category_cnt <= c->main_lebs);
 }
 
 /**
@@ -334,6 +337,9 @@
 	default:
 		ubifs_assert(0);
 	}
+
+	c->in_a_category_cnt -= 1;
+	ubifs_assert(c->in_a_category_cnt >= 0);
 }
 
 /**
diff --git a/fs/ubifs/ubifs.h b/fs/ubifs/ubifs.h
index 5486346..d133c27 100644
--- a/fs/ubifs/ubifs.h
+++ b/fs/ubifs/ubifs.h
@@ -1183,6 +1183,8 @@
  * @freeable_list: list of freeable non-index LEBs (free + dirty == @leb_size)
  * @frdi_idx_list: list of freeable index LEBs (free + dirty == @leb_size)
  * @freeable_cnt: number of freeable LEBs in @freeable_list
+ * @in_a_category_cnt: count of lprops which are in a certain category, which
+ *                     basically meants that they were loaded from the flash
  *
  * @ltab_lnum: LEB number of LPT's own lprops table
  * @ltab_offs: offset of LPT's own lprops table
@@ -1412,6 +1414,7 @@
 	struct list_head freeable_list;
 	struct list_head frdi_idx_list;
 	int freeable_cnt;
+	int in_a_category_cnt;
 
 	int ltab_lnum;
 	int ltab_offs;
diff --git a/fs/xfs/xfs_aops.c b/fs/xfs/xfs_aops.c
index e562dd4..e57e2da 100644
--- a/fs/xfs/xfs_aops.c
+++ b/fs/xfs/xfs_aops.c
@@ -481,11 +481,17 @@
  *
  * The fix is two passes across the ioend list - one to start writeback on the
  * buffer_heads, and then submit them for I/O on the second pass.
+ *
+ * If @fail is non-zero, it means that we have a situation where some part of
+ * the submission process has failed after we have marked paged for writeback
+ * and unlocked them. In this situation, we need to fail the ioend chain rather
+ * than submit it to IO. This typically only happens on a filesystem shutdown.
  */
 STATIC void
 xfs_submit_ioend(
 	struct writeback_control *wbc,
-	xfs_ioend_t		*ioend)
+	xfs_ioend_t		*ioend,
+	int			fail)
 {
 	xfs_ioend_t		*head = ioend;
 	xfs_ioend_t		*next;
@@ -506,6 +512,18 @@
 		next = ioend->io_list;
 		bio = NULL;
 
+		/*
+		 * If we are failing the IO now, just mark the ioend with an
+		 * error and finish it. This will run IO completion immediately
+		 * as there is only one reference to the ioend at this point in
+		 * time.
+		 */
+		if (fail) {
+			ioend->io_error = -fail;
+			xfs_finish_ioend(ioend);
+			continue;
+		}
+
 		for (bh = ioend->io_buffer_head; bh; bh = bh->b_private) {
 
 			if (!bio) {
@@ -1060,7 +1078,18 @@
 
 	xfs_start_page_writeback(page, 1, count);
 
-	if (ioend && imap_valid) {
+	/* if there is no IO to be submitted for this page, we are done */
+	if (!ioend)
+		return 0;
+
+	ASSERT(iohead);
+
+	/*
+	 * Any errors from this point onwards need tobe reported through the IO
+	 * completion path as we have marked the initial page as under writeback
+	 * and unlocked it.
+	 */
+	if (imap_valid) {
 		xfs_off_t		end_index;
 
 		end_index = imap.br_startoff + imap.br_blockcount;
@@ -1079,20 +1108,15 @@
 				  wbc, end_index);
 	}
 
-	if (iohead) {
-		/*
-		 * Reserve log space if we might write beyond the on-disk
-		 * inode size.
-		 */
-		if (ioend->io_type != XFS_IO_UNWRITTEN &&
-		    xfs_ioend_is_append(ioend)) {
-			err = xfs_setfilesize_trans_alloc(ioend);
-			if (err)
-				goto error;
-		}
 
-		xfs_submit_ioend(wbc, iohead);
-	}
+	/*
+	 * Reserve log space if we might write beyond the on-disk inode size.
+	 */
+	err = 0;
+	if (ioend->io_type != XFS_IO_UNWRITTEN && xfs_ioend_is_append(ioend))
+		err = xfs_setfilesize_trans_alloc(ioend);
+
+	xfs_submit_ioend(wbc, iohead, err);
 
 	return 0;
 
diff --git a/fs/xfs/xfs_attr_leaf.c b/fs/xfs/xfs_attr_leaf.c
index d330111..70eec18 100644
--- a/fs/xfs/xfs_attr_leaf.c
+++ b/fs/xfs/xfs_attr_leaf.c
@@ -1291,6 +1291,7 @@
 	leaf2 = blk2->bp->b_addr;
 	ASSERT(leaf1->hdr.info.magic == cpu_to_be16(XFS_ATTR_LEAF_MAGIC));
 	ASSERT(leaf2->hdr.info.magic == cpu_to_be16(XFS_ATTR_LEAF_MAGIC));
+	ASSERT(leaf2->hdr.count == 0);
 	args = state->args;
 
 	trace_xfs_attr_leaf_rebalance(args);
@@ -1361,6 +1362,7 @@
 		 * I assert that since all callers pass in an empty
 		 * second buffer, this code should never execute.
 		 */
+		ASSERT(0);
 
 		/*
 		 * Figure the total bytes to be added to the destination leaf.
@@ -1422,10 +1424,24 @@
 			args->index2 = 0;
 			args->blkno2 = blk2->blkno;
 		} else {
+			/*
+			 * On a double leaf split, the original attr location
+			 * is already stored in blkno2/index2, so don't
+			 * overwrite it overwise we corrupt the tree.
+			 */
 			blk2->index = blk1->index
 				    - be16_to_cpu(leaf1->hdr.count);
-			args->index = args->index2 = blk2->index;
-			args->blkno = args->blkno2 = blk2->blkno;
+			args->index = blk2->index;
+			args->blkno = blk2->blkno;
+			if (!state->extravalid) {
+				/*
+				 * set the new attr location to match the old
+				 * one and let the higher level split code
+				 * decide where in the leaf to place it.
+				 */
+				args->index2 = blk2->index;
+				args->blkno2 = blk2->blkno;
+			}
 		}
 	} else {
 		ASSERT(state->inleaf == 1);
diff --git a/fs/xfs/xfs_buf.c b/fs/xfs/xfs_buf.c
index 933b793..4b0b8dd 100644
--- a/fs/xfs/xfs_buf.c
+++ b/fs/xfs/xfs_buf.c
@@ -1197,9 +1197,14 @@
 {
 	xfs_buf_t		*bp = (xfs_buf_t *)bio->bi_private;
 
-	xfs_buf_ioerror(bp, -error);
+	/*
+	 * don't overwrite existing errors - otherwise we can lose errors on
+	 * buffers that require multiple bios to complete.
+	 */
+	if (!bp->b_error)
+		xfs_buf_ioerror(bp, -error);
 
-	if (!error && xfs_buf_is_vmapped(bp) && (bp->b_flags & XBF_READ))
+	if (!bp->b_error && xfs_buf_is_vmapped(bp) && (bp->b_flags & XBF_READ))
 		invalidate_kernel_vmap_range(bp->b_addr, xfs_buf_vmap_len(bp));
 
 	_xfs_buf_ioend(bp, 1);
@@ -1279,6 +1284,11 @@
 		if (size)
 			goto next_chunk;
 	} else {
+		/*
+		 * This is guaranteed not to be the last io reference count
+		 * because the caller (xfs_buf_iorequest) holds a count itself.
+		 */
+		atomic_dec(&bp->b_io_remaining);
 		xfs_buf_ioerror(bp, EIO);
 		bio_put(bio);
 	}
diff --git a/include/acpi/acconfig.h b/include/acpi/acconfig.h
index 03f1485..0943457 100644
--- a/include/acpi/acconfig.h
+++ b/include/acpi/acconfig.h
@@ -241,6 +241,7 @@
  *****************************************************************************/
 
 #define ACPI_DEBUGGER_MAX_ARGS          8	/* Must be max method args + 1 */
+#define ACPI_DB_LINE_BUFFER_SIZE	512
 
 #define ACPI_DEBUGGER_COMMAND_PROMPT    '-'
 #define ACPI_DEBUGGER_EXECUTE_PROMPT    '%'
diff --git a/include/acpi/acexcep.h b/include/acpi/acexcep.h
index 1950344..6c3890e 100644
--- a/include/acpi/acexcep.h
+++ b/include/acpi/acexcep.h
@@ -122,7 +122,7 @@
 #define AE_CODE_TBL_MAX                 0x0005
 
 /*
- * AML exceptions.  These are caused by problems with
+ * AML exceptions. These are caused by problems with
  * the actual AML byte stream
  */
 #define AE_AML_BAD_OPCODE               (acpi_status) (0x0001 | AE_CODE_AML)
diff --git a/include/acpi/acnames.h b/include/acpi/acnames.h
index 745dd24e..7665df6 100644
--- a/include/acpi/acnames.h
+++ b/include/acpi/acnames.h
@@ -50,6 +50,7 @@
 #define METHOD_NAME__HID        "_HID"
 #define METHOD_NAME__CID        "_CID"
 #define METHOD_NAME__UID        "_UID"
+#define METHOD_NAME__SUB        "_SUB"
 #define METHOD_NAME__ADR        "_ADR"
 #define METHOD_NAME__INI        "_INI"
 #define METHOD_NAME__STA        "_STA"
diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
index 0daa0fb..7ced5dc 100644
--- a/include/acpi/acpi_bus.h
+++ b/include/acpi/acpi_bus.h
@@ -144,12 +144,11 @@
 	u32 bus_address:1;
 	u32 removable:1;
 	u32 ejectable:1;
-	u32 lockable:1;
 	u32 suprise_removal_ok:1;
 	u32 power_manageable:1;
 	u32 performance_manageable:1;
 	u32 eject_pending:1;
-	u32 reserved:23;
+	u32 reserved:24;
 };
 
 /* File System */
@@ -180,6 +179,7 @@
 	acpi_device_name device_name;	/* Driver-determined */
 	acpi_device_class device_class;	/*        "          */
 	union acpi_object *str_obj;	/* unicode string for _STR method */
+	unsigned long sun;		/* _SUN */
 };
 
 #define acpi_device_bid(d)	((d)->pnp.bus_id)
@@ -201,6 +201,7 @@
 struct acpi_device_power_state {
 	struct {
 		u8 valid:1;
+		u8 os_accessible:1;
 		u8 explicit_set:1;	/* _PSx present? */
 		u8 reserved:6;
 	} flags;
@@ -339,6 +340,7 @@
 				       unsigned long long *sta);
 int acpi_bus_get_status(struct acpi_device *device);
 int acpi_bus_set_power(acpi_handle handle, int state);
+int acpi_device_set_power(struct acpi_device *device, int state);
 int acpi_bus_update_power(acpi_handle handle, int *state_p);
 bool acpi_bus_power_manageable(acpi_handle handle);
 bool acpi_bus_can_wakeup(acpi_handle handle);
@@ -410,27 +412,70 @@
 int acpi_is_root_bridge(acpi_handle);
 acpi_handle acpi_get_pci_rootbridge_handle(unsigned int, unsigned int);
 struct acpi_pci_root *acpi_pci_find_root(acpi_handle handle);
-#define DEVICE_ACPI_HANDLE(dev) ((acpi_handle)((dev)->archdata.acpi_handle))
+#define DEVICE_ACPI_HANDLE(dev) ((acpi_handle)ACPI_HANDLE(dev))
 
 int acpi_enable_wakeup_device_power(struct acpi_device *dev, int state);
 int acpi_disable_wakeup_device_power(struct acpi_device *dev);
 
 #ifdef CONFIG_PM
+acpi_status acpi_add_pm_notifier(struct acpi_device *adev,
+				 acpi_notify_handler handler, void *context);
+acpi_status acpi_remove_pm_notifier(struct acpi_device *adev,
+				    acpi_notify_handler handler);
+int acpi_device_power_state(struct device *dev, struct acpi_device *adev,
+			    u32 target_state, int d_max_in, int *d_min_p);
 int acpi_pm_device_sleep_state(struct device *, int *, int);
 #else
-static inline int acpi_pm_device_sleep_state(struct device *d, int *p, int m)
+static inline acpi_status acpi_add_pm_notifier(struct acpi_device *adev,
+					       acpi_notify_handler handler,
+					       void *context)
+{
+	return AE_SUPPORT;
+}
+static inline acpi_status acpi_remove_pm_notifier(struct acpi_device *adev,
+						  acpi_notify_handler handler)
+{
+	return AE_SUPPORT;
+}
+static inline int __acpi_device_power_state(int m, int *p)
 {
 	if (p)
 		*p = ACPI_STATE_D0;
 	return (m >= ACPI_STATE_D0 && m <= ACPI_STATE_D3) ? m : ACPI_STATE_D0;
 }
+static inline int acpi_device_power_state(struct device *dev,
+					  struct acpi_device *adev,
+					  u32 target_state, int d_max_in,
+					  int *d_min_p)
+{
+	return __acpi_device_power_state(d_max_in, d_min_p);
+}
+static inline int acpi_pm_device_sleep_state(struct device *d, int *p, int m)
+{
+	return __acpi_device_power_state(m, p);
+}
+#endif
+
+#ifdef CONFIG_PM_RUNTIME
+int __acpi_device_run_wake(struct acpi_device *, bool);
+int acpi_pm_device_run_wake(struct device *, bool);
+#else
+static inline int __acpi_device_run_wake(struct acpi_device *adev, bool en)
+{
+	return -ENODEV;
+}
+static inline int acpi_pm_device_run_wake(struct device *dev, bool enable)
+{
+	return -ENODEV;
+}
 #endif
 
 #ifdef CONFIG_PM_SLEEP
-int acpi_pm_device_run_wake(struct device *, bool);
+int __acpi_device_sleep_wake(struct acpi_device *, u32, bool);
 int acpi_pm_device_sleep_wake(struct device *, bool);
 #else
-static inline int acpi_pm_device_run_wake(struct device *dev, bool enable)
+static inline int __acpi_device_sleep_wake(struct acpi_device *adev,
+					   u32 target_state, bool enable)
 {
 	return -ENODEV;
 }
@@ -440,6 +485,27 @@
 }
 #endif
 
+#ifdef CONFIG_ACPI_SLEEP
+u32 acpi_target_system_state(void);
+#else
+static inline u32 acpi_target_system_state(void) { return ACPI_STATE_S0; }
+#endif
+
+static inline bool acpi_device_power_manageable(struct acpi_device *adev)
+{
+	return adev->flags.power_manageable;
+}
+
+static inline bool acpi_device_can_wakeup(struct acpi_device *adev)
+{
+	return adev->wakeup.flags.valid;
+}
+
+static inline bool acpi_device_can_poweroff(struct acpi_device *adev)
+{
+	return adev->power.states[ACPI_STATE_D3_COLD].flags.os_accessible;
+}
+
 #else	/* CONFIG_ACPI */
 
 static inline int register_acpi_bus_type(void *bus) { return 0; }
diff --git a/include/acpi/acpiosxf.h b/include/acpi/acpiosxf.h
index 1222ba9..4315274 100644
--- a/include/acpi/acpiosxf.h
+++ b/include/acpi/acpiosxf.h
@@ -1,7 +1,6 @@
-
 /******************************************************************************
  *
- * Name: acpiosxf.h - All interfaces to the OS Services Layer (OSL).  These
+ * Name: acpiosxf.h - All interfaces to the OS Services Layer (OSL). These
  *                    interfaces must be implemented by OSL to interface the
  *                    ACPI components to the host operating system.
  *
diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h
index 8b891db..3d88395 100644
--- a/include/acpi/acpixf.h
+++ b/include/acpi/acpixf.h
@@ -1,4 +1,3 @@
-
 /******************************************************************************
  *
  * Name: acpixf.h - External interfaces to the ACPI subsystem
@@ -47,7 +46,7 @@
 
 /* Current ACPICA subsystem version in YYYYMMDD format */
 
-#define ACPI_CA_VERSION                 0x20120913
+#define ACPI_CA_VERSION                 0x20121018
 
 #include <acpi/acconfig.h>
 #include <acpi/actypes.h>
@@ -178,8 +177,7 @@
 
 acpi_status
 acpi_get_table_header(acpi_string signature,
-		      u32 instance,
-		      struct acpi_table_header *out_table_header);
+		      u32 instance, struct acpi_table_header *out_table_header);
 
 acpi_status
 acpi_get_table_with_size(acpi_string signature,
@@ -190,8 +188,7 @@
 	       u32 instance, struct acpi_table_header **out_table);
 
 acpi_status
-acpi_get_table_by_index(u32 table_index,
-			struct acpi_table_header **out_table);
+acpi_get_table_by_index(u32 table_index, struct acpi_table_header **out_table);
 
 acpi_status
 acpi_install_table_handler(acpi_tbl_handler handler, void *context);
@@ -274,7 +271,7 @@
 
 ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status
 				acpi_install_global_event_handler
-				(ACPI_GBL_EVENT_HANDLER handler, void *context))
+				(acpi_gbl_event_handler handler, void *context))
 
 ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status
 				 acpi_install_fixed_event_handler(u32
@@ -300,10 +297,9 @@
 							 u32 gpe_number,
 							 acpi_gpe_handler
 							 address))
-acpi_status
-acpi_install_notify_handler(acpi_handle device,
-			    u32 handler_type,
-			    acpi_notify_handler handler, void *context);
+acpi_status acpi_install_notify_handler(acpi_handle device, u32 handler_type,
+					acpi_notify_handler handler,
+					void *context);
 
 acpi_status
 acpi_remove_notify_handler(acpi_handle device,
diff --git a/include/acpi/actbl3.h b/include/acpi/actbl3.h
index 8c61b5f..6585141 100644
--- a/include/acpi/actbl3.h
+++ b/include/acpi/actbl3.h
@@ -277,10 +277,10 @@
  ******************************************************************************/
 
 #define ACPI_MPST_CHANNEL_INFO \
-	u16                             reserved1; \
 	u8                              channel_id; \
-	u8                              reserved2; \
-	u16                             power_node_count;
+	u8                              reserved1[3]; \
+	u16                             power_node_count; \
+	u16                             reserved2;
 
 /* Main table */
 
@@ -304,9 +304,8 @@
 	u32 length;
 	u64 range_address;
 	u64 range_length;
-	u8 num_power_states;
-	u8 num_physical_components;
-	u16 reserved2;
+	u32 num_power_states;
+	u32 num_physical_components;
 };
 
 /* Values for Flags field above */
@@ -332,10 +331,11 @@
 
 struct acpi_mpst_data_hdr {
 	u16 characteristics_count;
+	u16 reserved;
 };
 
 struct acpi_mpst_power_data {
-	u8 revision;
+	u8 structure_id;
 	u8 flags;
 	u16 reserved1;
 	u32 average_power;
@@ -356,10 +356,10 @@
 	u32 signature;
 	u16 pcc_command;
 	u16 pcc_status;
-	u16 command_register;
-	u16 status_register;
-	u16 power_state_id;
-	u16 power_node_id;
+	u32 command_register;
+	u32 status_register;
+	u32 power_state_id;
+	u32 power_node_id;
 	u64 energy_consumed;
 	u64 average_power;
 };
diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h
index a85bae9..4f43f1f 100644
--- a/include/acpi/actypes.h
+++ b/include/acpi/actypes.h
@@ -453,10 +453,14 @@
 #define ACPI_PHYSADDR_TO_PTR(i)         ACPI_TO_POINTER(i)
 #define ACPI_PTR_TO_PHYSADDR(i)         ACPI_TO_INTEGER(i)
 
+/* Optimizations for 4-character (32-bit) acpi_name manipulation */
+
 #ifndef ACPI_MISALIGNMENT_NOT_SUPPORTED
 #define ACPI_COMPARE_NAME(a,b)          (*ACPI_CAST_PTR (u32, (a)) == *ACPI_CAST_PTR (u32, (b)))
+#define ACPI_MOVE_NAME(dest,src)        (*ACPI_CAST_PTR (u32, (dest)) = *ACPI_CAST_PTR (u32, (src)))
 #else
 #define ACPI_COMPARE_NAME(a,b)          (!ACPI_STRNCMP (ACPI_CAST_PTR (char, (a)), ACPI_CAST_PTR (char, (b)), ACPI_NAME_SIZE))
+#define ACPI_MOVE_NAME(dest,src)        (ACPI_STRNCPY (ACPI_CAST_PTR (char, (dest)), ACPI_CAST_PTR (char, (src)), ACPI_NAME_SIZE))
 #endif
 
 /*******************************************************************************
@@ -796,11 +800,11 @@
 
 /* Sleep function dispatch */
 
-typedef acpi_status(*ACPI_SLEEP_FUNCTION) (u8 sleep_state);
+typedef acpi_status(*acpi_sleep_function) (u8 sleep_state);
 
 struct acpi_sleep_functions {
-	ACPI_SLEEP_FUNCTION legacy_function;
-	ACPI_SLEEP_FUNCTION extended_function;
+	acpi_sleep_function legacy_function;
+	acpi_sleep_function extended_function;
 };
 
 /*
@@ -922,7 +926,8 @@
 /*
  * Types specific to the OS service interfaces
  */
-typedef u32(ACPI_SYSTEM_XFACE * acpi_osd_handler) (void *context);
+typedef u32
+ (ACPI_SYSTEM_XFACE * acpi_osd_handler) (void *context);
 
 typedef void
  (ACPI_SYSTEM_XFACE * acpi_osd_exec_callback) (void *context);
@@ -931,14 +936,15 @@
  * Various handlers and callback procedures
  */
 typedef
-void (*ACPI_GBL_EVENT_HANDLER) (u32 event_type,
+void (*acpi_gbl_event_handler) (u32 event_type,
 			       acpi_handle device,
 			       u32 event_number, void *context);
 
 #define ACPI_EVENT_TYPE_GPE         0
 #define ACPI_EVENT_TYPE_FIXED       1
 
-typedef u32(*acpi_event_handler) (void *context);
+typedef
+u32(*acpi_event_handler) (void *context);
 
 typedef
 u32 (*acpi_gpe_handler) (acpi_handle gpe_device, u32 gpe_number, void *context);
@@ -1018,17 +1024,17 @@
 
 #define ACPI_UUID_LENGTH                16
 
-/* Structures used for device/processor HID, UID, CID */
+/* Structures used for device/processor HID, UID, CID, and SUB */
 
-struct acpica_device_id {
+struct acpi_pnp_device_id {
 	u32 length;		/* Length of string + null */
 	char *string;
 };
 
-struct acpica_device_id_list {
+struct acpi_pnp_device_id_list {
 	u32 count;		/* Number of IDs in Ids array */
 	u32 list_size;		/* Size of list, including ID strings */
-	struct acpica_device_id ids[1];	/* ID array */
+	struct acpi_pnp_device_id ids[1];	/* ID array */
 };
 
 /*
@@ -1046,9 +1052,10 @@
 	u8 lowest_dstates[5];	/* _sx_w values: 0xFF indicates not valid */
 	u32 current_status;	/* _STA value */
 	u64 address;	/* _ADR value */
-	struct acpica_device_id hardware_id;	/* _HID value */
-	struct acpica_device_id unique_id;	/* _UID value */
-	struct acpica_device_id_list compatible_id_list;	/* _CID list <must be last> */
+	struct acpi_pnp_device_id hardware_id;	/* _HID value */
+	struct acpi_pnp_device_id unique_id;	/* _UID value */
+	struct acpi_pnp_device_id subsystem_id;	/* _SUB value */
+	struct acpi_pnp_device_id_list compatible_id_list;	/* _CID list <must be last> */
 };
 
 /* Values for Flags field above (acpi_get_object_info) */
@@ -1061,11 +1068,12 @@
 #define ACPI_VALID_ADR                  0x02
 #define ACPI_VALID_HID                  0x04
 #define ACPI_VALID_UID                  0x08
-#define ACPI_VALID_CID                  0x10
-#define ACPI_VALID_SXDS                 0x20
-#define ACPI_VALID_SXWS                 0x40
+#define ACPI_VALID_SUB                  0x10
+#define ACPI_VALID_CID                  0x20
+#define ACPI_VALID_SXDS                 0x40
+#define ACPI_VALID_SXWS                 0x80
 
-/* Flags for _STA method */
+/* Flags for _STA return value (current_status above) */
 
 #define ACPI_STA_DEVICE_PRESENT         0x01
 #define ACPI_STA_DEVICE_ENABLED         0x02
diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h
index a9432fc..20ca766 100644
--- a/include/asm-generic/gpio.h
+++ b/include/asm-generic/gpio.h
@@ -5,6 +5,7 @@
 #include <linux/types.h>
 #include <linux/errno.h>
 #include <linux/of.h>
+#include <linux/pinctrl/pinctrl.h>
 
 #ifdef CONFIG_GPIOLIB
 
@@ -56,6 +57,8 @@
  *	enabling module power and clock; may sleep
  * @free: optional hook for chip-specific deactivation, such as
  *	disabling module power and clock; may sleep
+ * @get_direction: returns direction for signal "offset", 0=out, 1=in,
+ *	(same as GPIOF_DIR_XXX), or negative error
  * @direction_input: configures signal "offset" as input, or returns error
  * @get: returns value for signal "offset"; for output signals this
  *	returns either the value actually sensed, or zero
@@ -100,7 +103,8 @@
 						unsigned offset);
 	void			(*free)(struct gpio_chip *chip,
 						unsigned offset);
-
+	int			(*get_direction)(struct gpio_chip *chip,
+						unsigned offset);
 	int			(*direction_input)(struct gpio_chip *chip,
 						unsigned offset);
 	int			(*get)(struct gpio_chip *chip,
@@ -134,6 +138,15 @@
 	int (*of_xlate)(struct gpio_chip *gc,
 		        const struct of_phandle_args *gpiospec, u32 *flags);
 #endif
+#ifdef CONFIG_PINCTRL
+	/*
+	 * If CONFIG_PINCTRL is enabled, then gpio controllers can optionally
+	 * describe the actual pin range which they serve in an SoC. This
+	 * information would be used by pinctrl subsystem to configure
+	 * corresponding pins for gpio usage.
+	 */
+	struct list_head pin_ranges;
+#endif
 };
 
 extern const char *gpiochip_is_requested(struct gpio_chip *chip,
@@ -257,4 +270,41 @@
 }
 #endif	/* CONFIG_GPIO_SYSFS */
 
+#ifdef CONFIG_PINCTRL
+
+/**
+ * struct gpio_pin_range - pin range controlled by a gpio chip
+ * @head: list for maintaining set of pin ranges, used internally
+ * @pctldev: pinctrl device which handles corresponding pins
+ * @range: actual range of pins controlled by a gpio controller
+ */
+
+struct gpio_pin_range {
+	struct list_head node;
+	struct pinctrl_dev *pctldev;
+	struct pinctrl_gpio_range range;
+};
+
+int gpiochip_add_pin_range(struct gpio_chip *chip, const char *pinctl_name,
+			   unsigned int gpio_offset, unsigned int pin_offset,
+			   unsigned int npins);
+void gpiochip_remove_pin_ranges(struct gpio_chip *chip);
+
+#else
+
+static inline int
+gpiochip_add_pin_range(struct gpio_chip *chip, const char *pinctl_name,
+		       unsigned int gpio_offset, unsigned int pin_offset,
+		       unsigned int npins)
+{
+	return 0;
+}
+
+static inline void
+gpiochip_remove_pin_ranges(struct gpio_chip *chip)
+{
+}
+
+#endif /* CONFIG_PINCTRL */
+
 #endif /* _ASM_GENERIC_GPIO_H */
diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h
index af1cbaf..c5c35e6 100644
--- a/include/drm/drm_pciids.h
+++ b/include/drm/drm_pciids.h
@@ -210,6 +210,7 @@
 	{0x1002, 0x6798, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x6799, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x679A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x679B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x679E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x679F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x6800, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 90be989..c33fa3c 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -25,7 +25,9 @@
 #ifndef _LINUX_ACPI_H
 #define _LINUX_ACPI_H
 
+#include <linux/errno.h>
 #include <linux/ioport.h>	/* for struct resource */
+#include <linux/device.h>
 
 #ifdef	CONFIG_ACPI
 
@@ -250,6 +252,26 @@
 
 #define PXM_INVAL	(-1)
 
+bool acpi_dev_resource_memory(struct acpi_resource *ares, struct resource *res);
+bool acpi_dev_resource_io(struct acpi_resource *ares, struct resource *res);
+bool acpi_dev_resource_address_space(struct acpi_resource *ares,
+				     struct resource *res);
+bool acpi_dev_resource_ext_address_space(struct acpi_resource *ares,
+					 struct resource *res);
+unsigned long acpi_dev_irq_flags(u8 triggering, u8 polarity, u8 shareable);
+bool acpi_dev_resource_interrupt(struct acpi_resource *ares, int index,
+				 struct resource *res);
+
+struct resource_list_entry {
+	struct list_head node;
+	struct resource res;
+};
+
+void acpi_dev_free_resource_list(struct list_head *list);
+int acpi_dev_get_resources(struct acpi_device *adev, struct list_head *list,
+			   int (*preproc)(struct acpi_resource *, void *),
+			   void *preproc_data);
+
 int acpi_check_resource_conflict(const struct resource *res);
 
 int acpi_check_region(resource_size_t start, resource_size_t n,
@@ -257,10 +279,14 @@
 
 int acpi_resources_are_enforced(void);
 
-#ifdef CONFIG_PM_SLEEP
+#ifdef CONFIG_HIBERNATION
 void __init acpi_no_s4_hw_signature(void);
+#endif
+
+#ifdef CONFIG_PM_SLEEP
 void __init acpi_old_suspend_ordering(void);
 void __init acpi_nvs_nosave(void);
+void __init acpi_nvs_nosave_s3(void);
 #endif /* CONFIG_PM_SLEEP */
 
 struct acpi_osc_context {
@@ -364,6 +390,17 @@
 extern int acpi_nvs_for_each_region(int (*func)(__u64, __u64, void *),
 				    void *data);
 
+const struct acpi_device_id *acpi_match_device(const struct acpi_device_id *ids,
+					       const struct device *dev);
+
+static inline bool acpi_driver_match_device(struct device *dev,
+					    const struct device_driver *drv)
+{
+	return !!acpi_match_device(drv->acpi_match_table, dev);
+}
+
+#define ACPI_PTR(_ptr)	(_ptr)
+
 #else	/* !CONFIG_ACPI */
 
 #define acpi_disabled 1
@@ -418,6 +455,22 @@
 	return 0;
 }
 
+struct acpi_device_id;
+
+static inline const struct acpi_device_id *acpi_match_device(
+	const struct acpi_device_id *ids, const struct device *dev)
+{
+	return NULL;
+}
+
+static inline bool acpi_driver_match_device(struct device *dev,
+					    const struct device_driver *drv)
+{
+	return false;
+}
+
+#define ACPI_PTR(_ptr)	(NULL)
+
 #endif	/* !CONFIG_ACPI */
 
 #ifdef CONFIG_ACPI
@@ -430,4 +483,84 @@
 #define acpi_os_set_prepare_sleep(func, pm1a_ctrl, pm1b_ctrl) do { } while (0)
 #endif
 
+#if defined(CONFIG_ACPI) && defined(CONFIG_PM_RUNTIME)
+int acpi_dev_runtime_suspend(struct device *dev);
+int acpi_dev_runtime_resume(struct device *dev);
+int acpi_subsys_runtime_suspend(struct device *dev);
+int acpi_subsys_runtime_resume(struct device *dev);
+#else
+static inline int acpi_dev_runtime_suspend(struct device *dev) { return 0; }
+static inline int acpi_dev_runtime_resume(struct device *dev) { return 0; }
+static inline int acpi_subsys_runtime_suspend(struct device *dev) { return 0; }
+static inline int acpi_subsys_runtime_resume(struct device *dev) { return 0; }
+#endif
+
+#ifdef CONFIG_ACPI_SLEEP
+int acpi_dev_suspend_late(struct device *dev);
+int acpi_dev_resume_early(struct device *dev);
+int acpi_subsys_prepare(struct device *dev);
+int acpi_subsys_suspend_late(struct device *dev);
+int acpi_subsys_resume_early(struct device *dev);
+#else
+static inline int acpi_dev_suspend_late(struct device *dev) { return 0; }
+static inline int acpi_dev_resume_early(struct device *dev) { return 0; }
+static inline int acpi_subsys_prepare(struct device *dev) { return 0; }
+static inline int acpi_subsys_suspend_late(struct device *dev) { return 0; }
+static inline int acpi_subsys_resume_early(struct device *dev) { return 0; }
+#endif
+
+#if defined(CONFIG_ACPI) && defined(CONFIG_PM)
+int acpi_dev_pm_attach(struct device *dev, bool power_on);
+void acpi_dev_pm_detach(struct device *dev, bool power_off);
+#else
+static inline int acpi_dev_pm_attach(struct device *dev, bool power_on)
+{
+	return -ENODEV;
+}
+static inline void acpi_dev_pm_detach(struct device *dev, bool power_off) {}
+#endif
+
+#ifdef CONFIG_ACPI
+__printf(3, 4)
+void acpi_handle_printk(const char *level, acpi_handle handle,
+			const char *fmt, ...);
+#else	/* !CONFIG_ACPI */
+static inline __printf(3, 4) void
+acpi_handle_printk(const char *level, void *handle, const char *fmt, ...) {}
+#endif	/* !CONFIG_ACPI */
+
+/*
+ * acpi_handle_<level>: Print message with ACPI prefix and object path
+ *
+ * These interfaces acquire the global namespace mutex to obtain an object
+ * path.  In interrupt context, it shows the object path as <n/a>.
+ */
+#define acpi_handle_emerg(handle, fmt, ...)				\
+	acpi_handle_printk(KERN_EMERG, handle, fmt, ##__VA_ARGS__)
+#define acpi_handle_alert(handle, fmt, ...)				\
+	acpi_handle_printk(KERN_ALERT, handle, fmt, ##__VA_ARGS__)
+#define acpi_handle_crit(handle, fmt, ...)				\
+	acpi_handle_printk(KERN_CRIT, handle, fmt, ##__VA_ARGS__)
+#define acpi_handle_err(handle, fmt, ...)				\
+	acpi_handle_printk(KERN_ERR, handle, fmt, ##__VA_ARGS__)
+#define acpi_handle_warn(handle, fmt, ...)				\
+	acpi_handle_printk(KERN_WARNING, handle, fmt, ##__VA_ARGS__)
+#define acpi_handle_notice(handle, fmt, ...)				\
+	acpi_handle_printk(KERN_NOTICE, handle, fmt, ##__VA_ARGS__)
+#define acpi_handle_info(handle, fmt, ...)				\
+	acpi_handle_printk(KERN_INFO, handle, fmt, ##__VA_ARGS__)
+
+/* REVISIT: Support CONFIG_DYNAMIC_DEBUG when necessary */
+#if defined(DEBUG) || defined(CONFIG_DYNAMIC_DEBUG)
+#define acpi_handle_debug(handle, fmt, ...)				\
+	acpi_handle_printk(KERN_DEBUG, handle, fmt, ##__VA_ARGS__)
+#else
+#define acpi_handle_debug(handle, fmt, ...)				\
+({									\
+	if (0)								\
+		acpi_handle_printk(KERN_DEBUG, handle, fmt, ##__VA_ARGS__); \
+	0;								\
+})
+#endif
+
 #endif	/*_LINUX_ACPI_H*/
diff --git a/include/linux/acpi_gpio.h b/include/linux/acpi_gpio.h
new file mode 100644
index 0000000..91615a38
--- /dev/null
+++ b/include/linux/acpi_gpio.h
@@ -0,0 +1,19 @@
+#ifndef _LINUX_ACPI_GPIO_H_
+#define _LINUX_ACPI_GPIO_H_
+
+#include <linux/errno.h>
+
+#ifdef CONFIG_GPIO_ACPI
+
+int acpi_get_gpio(char *path, int pin);
+
+#else /* CONFIG_GPIO_ACPI */
+
+static inline int acpi_get_gpio(char *path, int pin)
+{
+	return -ENODEV;
+}
+
+#endif /* CONFIG_GPIO_ACPI */
+
+#endif /* _LINUX_ACPI_GPIO_H_ */
diff --git a/include/linux/bug.h b/include/linux/bug.h
index aaac4bb..b1cf40d 100644
--- a/include/linux/bug.h
+++ b/include/linux/bug.h
@@ -15,6 +15,7 @@
 #define BUILD_BUG_ON_NOT_POWER_OF_2(n)
 #define BUILD_BUG_ON_ZERO(e) (0)
 #define BUILD_BUG_ON_NULL(e) ((void*)0)
+#define BUILD_BUG_ON_INVALID(e) (0)
 #define BUILD_BUG_ON(condition)
 #define BUILD_BUG() (0)
 #else /* __CHECKER__ */
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index c127315..4989b8a 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -53,9 +53,18 @@
  * @disable:	Disable the clock atomically. Called with enable_lock held.
  * 		This function must not sleep.
  *
- * @recalc_rate	Recalculate the rate of this clock, by quering hardware.  The
+ * @is_enabled:	Queries the hardware to determine if the clock is enabled.
+ * 		This function must not sleep. Optional, if this op is not
+ * 		set then the enable count will be used.
+ *
+ * @disable_unused: Disable the clock atomically.  Only called from
+ *		clk_disable_unused for gate clocks with special needs.
+ *		Called with enable_lock held.  This function must not
+ *		sleep.
+ *
+ * @recalc_rate	Recalculate the rate of this clock, by querying hardware. The
  * 		parent rate is an input parameter.  It is up to the caller to
- * 		insure that the prepare_mutex is held across this call.
+ * 		ensure that the prepare_mutex is held across this call.
  * 		Returns the calculated rate.  Optional, but recommended - if
  * 		this op is not set then clock rate will be initialized to 0.
  *
@@ -89,7 +98,7 @@
  * implementations to split any work between atomic (enable) and sleepable
  * (prepare) contexts.  If enabling a clock requires code that might sleep,
  * this must be done in clk_prepare.  Clock enable code that will never be
- * called in a sleepable context may be implement in clk_enable.
+ * called in a sleepable context may be implemented in clk_enable.
  *
  * Typically, drivers will call clk_prepare when a clock may be needed later
  * (eg. when a device is opened), and clk_enable when the clock is actually
@@ -102,6 +111,7 @@
 	int		(*enable)(struct clk_hw *hw);
 	void		(*disable)(struct clk_hw *hw);
 	int		(*is_enabled)(struct clk_hw *hw);
+	void		(*disable_unused)(struct clk_hw *hw);
 	unsigned long	(*recalc_rate)(struct clk_hw *hw,
 					unsigned long parent_rate);
 	long		(*round_rate)(struct clk_hw *hw, unsigned long,
@@ -327,19 +337,21 @@
  * error code; drivers must test for an error code after calling clk_register.
  */
 struct clk *clk_register(struct device *dev, struct clk_hw *hw);
+struct clk *devm_clk_register(struct device *dev, struct clk_hw *hw);
 
 void clk_unregister(struct clk *clk);
+void devm_clk_unregister(struct device *dev, struct clk *clk);
 
 /* helper functions */
 const char *__clk_get_name(struct clk *clk);
 struct clk_hw *__clk_get_hw(struct clk *clk);
 u8 __clk_get_num_parents(struct clk *clk);
 struct clk *__clk_get_parent(struct clk *clk);
-inline int __clk_get_enable_count(struct clk *clk);
-inline int __clk_get_prepare_count(struct clk *clk);
+unsigned int __clk_get_enable_count(struct clk *clk);
+unsigned int __clk_get_prepare_count(struct clk *clk);
 unsigned long __clk_get_rate(struct clk *clk);
 unsigned long __clk_get_flags(struct clk *clk);
-int __clk_is_enabled(struct clk *clk);
+bool __clk_is_enabled(struct clk *clk);
 struct clk *__clk_lookup(const char *name);
 
 /*
diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h
index b60f6ba..a55b88e 100644
--- a/include/linux/cpufreq.h
+++ b/include/linux/cpufreq.h
@@ -11,6 +11,7 @@
 #ifndef _LINUX_CPUFREQ_H
 #define _LINUX_CPUFREQ_H
 
+#include <asm/cputime.h>
 #include <linux/mutex.h>
 #include <linux/notifier.h>
 #include <linux/threads.h>
@@ -22,6 +23,8 @@
 #include <asm/div64.h>
 
 #define CPUFREQ_NAME_LEN 16
+/* Print length for names. Extra 1 space for accomodating '\n' in prints */
+#define CPUFREQ_NAME_PLEN (CPUFREQ_NAME_LEN + 1)
 
 
 /*********************************************************************
@@ -404,6 +407,4 @@
 				      unsigned int cpu);
 
 void cpufreq_frequency_table_put_attr(unsigned int cpu);
-
-
 #endif /* _LINUX_CPUFREQ_H */
diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h
index 279b1ea..3711b34 100644
--- a/include/linux/cpuidle.h
+++ b/include/linux/cpuidle.h
@@ -82,13 +82,6 @@
 	st_usage->driver_data = data;
 }
 
-struct cpuidle_state_kobj {
-	struct cpuidle_state *state;
-	struct cpuidle_state_usage *state_usage;
-	struct completion kobj_unregister;
-	struct kobject kobj;
-};
-
 struct cpuidle_device {
 	unsigned int		registered:1;
 	unsigned int		enabled:1;
@@ -98,7 +91,7 @@
 	int			state_count;
 	struct cpuidle_state_usage	states_usage[CPUIDLE_STATE_MAX];
 	struct cpuidle_state_kobj *kobjs[CPUIDLE_STATE_MAX];
-
+	struct cpuidle_driver_kobj *kobj_driver;
 	struct list_head 	device_list;
 	struct kobject		kobj;
 	struct completion	kobj_unregister;
@@ -131,6 +124,7 @@
 struct cpuidle_driver {
 	const char		*name;
 	struct module 		*owner;
+	int                     refcnt;
 
 	unsigned int		power_specified:1;
 	/* set to 1 to use the core cpuidle time keeping (for all states). */
@@ -163,6 +157,10 @@
 					struct cpuidle_driver *drv, int index));
 extern int cpuidle_play_dead(void);
 
+extern struct cpuidle_driver *cpuidle_get_cpu_driver(struct cpuidle_device *dev);
+extern int cpuidle_register_cpu_driver(struct cpuidle_driver *drv, int cpu);
+extern void cpuidle_unregister_cpu_driver(struct cpuidle_driver *drv, int cpu);
+
 #else
 static inline void disable_cpuidle(void) { }
 static inline int cpuidle_idle_call(void) { return -ENODEV; }
@@ -189,7 +187,6 @@
 					struct cpuidle_driver *drv, int index))
 { return -ENODEV; }
 static inline int cpuidle_play_dead(void) {return -ENODEV; }
-
 #endif
 
 #ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED
diff --git a/include/linux/devfreq.h b/include/linux/devfreq.h
index 281c72a..e83ef39 100644
--- a/include/linux/devfreq.h
+++ b/include/linux/devfreq.h
@@ -25,12 +25,12 @@
  * struct devfreq_dev_status - Data given from devfreq user device to
  *			     governors. Represents the performance
  *			     statistics.
- * @total_time		The total time represented by this instance of
+ * @total_time:		The total time represented by this instance of
  *			devfreq_dev_status
- * @busy_time		The time that the device was working among the
+ * @busy_time:		The time that the device was working among the
  *			total_time.
- * @current_frequency	The operating frequency.
- * @private_data	An entry not specified by the devfreq framework.
+ * @current_frequency:	The operating frequency.
+ * @private_data:	An entry not specified by the devfreq framework.
  *			A device and a specific governor may have their
  *			own protocol with private_data. However, because
  *			this is governor-specific, a governor using this
@@ -54,23 +54,27 @@
 
 /**
  * struct devfreq_dev_profile - Devfreq's user device profile
- * @initial_freq	The operating frequency when devfreq_add_device() is
+ * @initial_freq:	The operating frequency when devfreq_add_device() is
  *			called.
- * @polling_ms		The polling interval in ms. 0 disables polling.
- * @target		The device should set its operating frequency at
+ * @polling_ms:		The polling interval in ms. 0 disables polling.
+ * @target:		The device should set its operating frequency at
  *			freq or lowest-upper-than-freq value. If freq is
  *			higher than any operable frequency, set maximum.
  *			Before returning, target function should set
  *			freq at the current frequency.
  *			The "flags" parameter's possible values are
  *			explained above with "DEVFREQ_FLAG_*" macros.
- * @get_dev_status	The device should provide the current performance
+ * @get_dev_status:	The device should provide the current performance
  *			status to devfreq, which is used by governors.
- * @exit		An optional callback that is called when devfreq
+ * @get_cur_freq:	The device should provide the current frequency
+ *			at which it is operating.
+ * @exit:		An optional callback that is called when devfreq
  *			is removing the devfreq object due to error or
  *			from devfreq_remove_device() call. If the user
  *			has registered devfreq->nb at a notifier-head,
  *			this is the time to unregister it.
+ * @freq_table:	Optional list of frequencies to support statistics.
+ * @max_state:	The size of freq_table.
  */
 struct devfreq_dev_profile {
 	unsigned long initial_freq;
@@ -79,63 +83,63 @@
 	int (*target)(struct device *dev, unsigned long *freq, u32 flags);
 	int (*get_dev_status)(struct device *dev,
 			      struct devfreq_dev_status *stat);
+	int (*get_cur_freq)(struct device *dev, unsigned long *freq);
 	void (*exit)(struct device *dev);
+
+	unsigned int *freq_table;
+	unsigned int max_state;
 };
 
 /**
  * struct devfreq_governor - Devfreq policy governor
- * @name		Governor's name
- * @get_target_freq	Returns desired operating frequency for the device.
+ * @node:		list node - contains registered devfreq governors
+ * @name:		Governor's name
+ * @get_target_freq:	Returns desired operating frequency for the device.
  *			Basically, get_target_freq will run
  *			devfreq_dev_profile.get_dev_status() to get the
  *			status of the device (load = busy_time / total_time).
  *			If no_central_polling is set, this callback is called
  *			only with update_devfreq() notified by OPP.
- * @init		Called when the devfreq is being attached to a device
- * @exit		Called when the devfreq is being removed from a
- *			device. Governor should stop any internal routines
- *			before return because related data may be
- *			freed after exit().
- * @no_central_polling	Do not use devfreq's central polling mechanism.
- *			When this is set, devfreq will not call
- *			get_target_freq with devfreq_monitor(). However,
- *			devfreq will call get_target_freq with
- *			devfreq_update() notified by OPP framework.
+ * @event_handler:      Callback for devfreq core framework to notify events
+ *                      to governors. Events include per device governor
+ *                      init and exit, opp changes out of devfreq, suspend
+ *                      and resume of per device devfreq during device idle.
  *
  * Note that the callbacks are called with devfreq->lock locked by devfreq.
  */
 struct devfreq_governor {
+	struct list_head node;
+
 	const char name[DEVFREQ_NAME_LEN];
 	int (*get_target_freq)(struct devfreq *this, unsigned long *freq);
-	int (*init)(struct devfreq *this);
-	void (*exit)(struct devfreq *this);
-	const bool no_central_polling;
+	int (*event_handler)(struct devfreq *devfreq,
+				unsigned int event, void *data);
 };
 
 /**
  * struct devfreq - Device devfreq structure
- * @node	list node - contains the devices with devfreq that have been
+ * @node:	list node - contains the devices with devfreq that have been
  *		registered.
- * @lock	a mutex to protect accessing devfreq.
- * @dev		device registered by devfreq class. dev.parent is the device
+ * @lock:	a mutex to protect accessing devfreq.
+ * @dev:	device registered by devfreq class. dev.parent is the device
  *		using devfreq.
- * @profile	device-specific devfreq profile
- * @governor	method how to choose frequency based on the usage.
- * @nb		notifier block used to notify devfreq object that it should
+ * @profile:	device-specific devfreq profile
+ * @governor:	method how to choose frequency based on the usage.
+ * @governor_name:	devfreq governor name for use with this devfreq
+ * @nb:		notifier block used to notify devfreq object that it should
  *		reevaluate operable frequencies. Devfreq users may use
  *		devfreq.nb to the corresponding register notifier call chain.
- * @polling_jiffies	interval in jiffies.
- * @previous_freq	previously configured frequency value.
- * @next_polling	the number of remaining jiffies to poll with
- *			"devfreq_monitor" executions to reevaluate
- *			frequency/voltage of the device. Set by
- *			profile's polling_ms interval.
- * @data	Private data of the governor. The devfreq framework does not
+ * @work:	delayed work for load monitoring.
+ * @previous_freq:	previously configured frequency value.
+ * @data:	Private data of the governor. The devfreq framework does not
  *		touch this.
- * @being_removed	a flag to mark that this object is being removed in
- *			order to prevent trying to remove the object multiple times.
- * @min_freq	Limit minimum frequency requested by user (0: none)
- * @max_freq	Limit maximum frequency requested by user (0: none)
+ * @min_freq:	Limit minimum frequency requested by user (0: none)
+ * @max_freq:	Limit maximum frequency requested by user (0: none)
+ * @stop_polling:	 devfreq polling status of a device.
+ * @total_trans:	Number of devfreq transitions
+ * @trans_table:	Statistics of devfreq transitions
+ * @time_in_state:	Statistics of devfreq states
+ * @last_stat_updated:	The last time stat updated
  *
  * This structure stores the devfreq information for a give device.
  *
@@ -152,26 +156,33 @@
 	struct device dev;
 	struct devfreq_dev_profile *profile;
 	const struct devfreq_governor *governor;
+	char governor_name[DEVFREQ_NAME_LEN];
 	struct notifier_block nb;
+	struct delayed_work work;
 
-	unsigned long polling_jiffies;
 	unsigned long previous_freq;
-	unsigned int next_polling;
 
 	void *data; /* private data for governors */
 
-	bool being_removed;
-
 	unsigned long min_freq;
 	unsigned long max_freq;
+	bool stop_polling;
+
+	/* information for device freqeuncy transition */
+	unsigned int total_trans;
+	unsigned int *trans_table;
+	unsigned long *time_in_state;
+	unsigned long last_stat_updated;
 };
 
 #if defined(CONFIG_PM_DEVFREQ)
 extern struct devfreq *devfreq_add_device(struct device *dev,
 				  struct devfreq_dev_profile *profile,
-				  const struct devfreq_governor *governor,
+				  const char *governor_name,
 				  void *data);
 extern int devfreq_remove_device(struct devfreq *devfreq);
+extern int devfreq_suspend_device(struct devfreq *devfreq);
+extern int devfreq_resume_device(struct devfreq *devfreq);
 
 /* Helper functions for devfreq user device driver with OPP. */
 extern struct opp *devfreq_recommended_opp(struct device *dev,
@@ -181,23 +192,13 @@
 extern int devfreq_unregister_opp_notifier(struct device *dev,
 					   struct devfreq *devfreq);
 
-#ifdef CONFIG_DEVFREQ_GOV_POWERSAVE
-extern const struct devfreq_governor devfreq_powersave;
-#endif
-#ifdef CONFIG_DEVFREQ_GOV_PERFORMANCE
-extern const struct devfreq_governor devfreq_performance;
-#endif
-#ifdef CONFIG_DEVFREQ_GOV_USERSPACE
-extern const struct devfreq_governor devfreq_userspace;
-#endif
-#ifdef CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND
-extern const struct devfreq_governor devfreq_simple_ondemand;
+#if IS_ENABLED(CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND)
 /**
  * struct devfreq_simple_ondemand_data - void *data fed to struct devfreq
  *	and devfreq_add_device
- * @ upthreshold	If the load is over this value, the frequency jumps.
+ * @upthreshold:	If the load is over this value, the frequency jumps.
  *			Specify 0 to use the default. Valid value = 0 to 100.
- * @ downdifferential	If the load is under upthreshold - downdifferential,
+ * @downdifferential:	If the load is under upthreshold - downdifferential,
  *			the governor may consider slowing the frequency down.
  *			Specify 0 to use the default. Valid value = 0 to 100.
  *			downdifferential < upthreshold must hold.
@@ -214,7 +215,7 @@
 #else /* !CONFIG_PM_DEVFREQ */
 static struct devfreq *devfreq_add_device(struct device *dev,
 					  struct devfreq_dev_profile *profile,
-					  struct devfreq_governor *governor,
+					  const char *governor_name,
 					  void *data)
 {
 	return NULL;
@@ -225,6 +226,16 @@
 	return 0;
 }
 
+static int devfreq_suspend_device(struct devfreq *devfreq)
+{
+	return 0;
+}
+
+static int devfreq_resume_device(struct devfreq *devfreq)
+{
+	return 0;
+}
+
 static struct opp *devfreq_recommended_opp(struct device *dev,
 					   unsigned long *freq, u32 flags)
 {
@@ -243,11 +254,6 @@
 	return -EINVAL;
 }
 
-#define devfreq_powersave	NULL
-#define devfreq_performance	NULL
-#define devfreq_userspace	NULL
-#define devfreq_simple_ondemand	NULL
-
 #endif /* CONFIG_PM_DEVFREQ */
 
 #endif /* __LINUX_DEVFREQ_H__ */
diff --git a/include/linux/device.h b/include/linux/device.h
index 86ef6ab..05292e4 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -190,6 +190,7 @@
  * @mod_name:	Used for built-in modules.
  * @suppress_bind_attrs: Disables bind/unbind via sysfs.
  * @of_match_table: The open firmware table.
+ * @acpi_match_table: The ACPI match table.
  * @probe:	Called to query the existence of a specific device,
  *		whether this driver can work with it, and bind the driver
  *		to a specific device.
@@ -223,6 +224,7 @@
 	bool suppress_bind_attrs;	/* disables bind/unbind via sysfs */
 
 	const struct of_device_id	*of_match_table;
+	const struct acpi_device_id	*acpi_match_table;
 
 	int (*probe) (struct device *dev);
 	int (*remove) (struct device *dev);
@@ -576,6 +578,12 @@
 	unsigned long segment_boundary_mask;
 };
 
+struct acpi_dev_node {
+#ifdef CONFIG_ACPI
+	void	*handle;
+#endif
+};
+
 /**
  * struct device - The basic device structure
  * @parent:	The device's "parent" device, the device to which it is attached.
@@ -616,6 +624,7 @@
  * @dma_mem:	Internal for coherent mem override.
  * @archdata:	For arch-specific additions.
  * @of_node:	Associated device tree node.
+ * @acpi_node:	Associated ACPI device node.
  * @devt:	For creating the sysfs "dev".
  * @id:		device instance
  * @devres_lock: Spinlock to protect the resource of the device.
@@ -680,6 +689,7 @@
 	struct dev_archdata	archdata;
 
 	struct device_node	*of_node; /* associated device tree node */
+	struct acpi_dev_node	acpi_node; /* associated ACPI device node */
 
 	dev_t			devt;	/* dev_t, creates the sysfs "dev" */
 	u32			id;	/* device instance */
@@ -700,6 +710,14 @@
 	return container_of(kobj, struct device, kobj);
 }
 
+#ifdef CONFIG_ACPI
+#define ACPI_HANDLE(dev)	((dev)->acpi_node.handle)
+#define ACPI_HANDLE_SET(dev, _handle_)	(dev)->acpi_node.handle = (_handle_)
+#else
+#define ACPI_HANDLE(dev)	(NULL)
+#define ACPI_HANDLE_SET(dev, _handle_)	do { } while (0)
+#endif
+
 /* Get the wakeup routines, which depend on struct device */
 #include <linux/pm_wakeup.h>
 
diff --git a/include/linux/dma-contiguous.h b/include/linux/dma-contiguous.h
index 2f303e4..01b5c84 100644
--- a/include/linux/dma-contiguous.h
+++ b/include/linux/dma-contiguous.h
@@ -68,7 +68,7 @@
 extern struct cma *dma_contiguous_default_area;
 
 void dma_contiguous_reserve(phys_addr_t addr_limit);
-int dma_declare_contiguous(struct device *dev, unsigned long size,
+int dma_declare_contiguous(struct device *dev, phys_addr_t size,
 			   phys_addr_t base, phys_addr_t limit);
 
 struct page *dma_alloc_from_contiguous(struct device *dev, int count,
@@ -83,7 +83,7 @@
 static inline void dma_contiguous_reserve(phys_addr_t limit) { }
 
 static inline
-int dma_declare_contiguous(struct device *dev, unsigned long size,
+int dma_declare_contiguous(struct device *dev, phys_addr_t size,
 			   phys_addr_t base, phys_addr_t limit)
 {
 	return -ENOSYS;
diff --git a/include/linux/edac.h b/include/linux/edac.h
index bab9f84..1b8c02b 100644
--- a/include/linux/edac.h
+++ b/include/linux/edac.h
@@ -533,6 +533,7 @@
 
 	u32 ue_count;		/* Uncorrectable Errors for this csrow */
 	u32 ce_count;		/* Correctable Errors for this csrow */
+	u32 nr_pages;		/* combined pages count of all channels */
 
 	struct mem_ctl_info *mci;	/* the parent */
 
@@ -667,6 +668,8 @@
 	u32 fake_inject_ue;
 	u16 fake_inject_count;
 #endif
+	__u8 csbased : 1,	/* csrow-based memory controller */
+	     __resv  : 7;
 };
 
 #endif
diff --git a/include/linux/freezer.h b/include/linux/freezer.h
index d09af4b..b90091a 100644
--- a/include/linux/freezer.h
+++ b/include/linux/freezer.h
@@ -177,6 +177,7 @@
 static inline void thaw_processes(void) {}
 static inline void thaw_kernel_threads(void) {}
 
+static inline bool try_to_freeze_nowarn(void) { return false; }
 static inline bool try_to_freeze(void) { return false; }
 
 static inline void freezer_do_not_count(void) {}
diff --git a/include/linux/fs.h b/include/linux/fs.h
index b33cfc9..75fe9a1 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -462,8 +462,6 @@
 	int			bd_fsfreeze_count;
 	/* Mutex for freeze */
 	struct mutex		bd_fsfreeze_mutex;
-	/* A semaphore that prevents I/O while block size is being changed */
-	struct percpu_rw_semaphore	bd_block_size_semaphore;
 };
 
 /*
@@ -2049,7 +2047,6 @@
 extern struct block_device *bdget(dev_t);
 extern struct block_device *bdgrab(struct block_device *bdev);
 extern void bd_set_size(struct block_device *, loff_t size);
-extern sector_t blkdev_max_block(struct block_device *bdev);
 extern void bd_forget(struct inode *inode);
 extern void bdput(struct block_device *);
 extern void invalidate_bdev(struct block_device *);
@@ -2379,8 +2376,6 @@
 		unsigned long *nr_segs, size_t *count, int access_flags);
 
 /* fs/block_dev.c */
-extern ssize_t blkdev_aio_read(struct kiocb *iocb, const struct iovec *iov,
-			       unsigned long nr_segs, loff_t pos);
 extern ssize_t blkdev_aio_write(struct kiocb *iocb, const struct iovec *iov,
 				unsigned long nr_segs, loff_t pos);
 extern int blkdev_fsync(struct file *filp, loff_t start, loff_t end,
diff --git a/include/linux/gfp.h b/include/linux/gfp.h
index 02c1c97..d0a7967 100644
--- a/include/linux/gfp.h
+++ b/include/linux/gfp.h
@@ -31,6 +31,7 @@
 #define ___GFP_THISNODE		0x40000u
 #define ___GFP_RECLAIMABLE	0x80000u
 #define ___GFP_NOTRACK		0x200000u
+#define ___GFP_NO_KSWAPD	0x400000u
 #define ___GFP_OTHER_NODE	0x800000u
 #define ___GFP_WRITE		0x1000000u
 
@@ -85,6 +86,7 @@
 #define __GFP_RECLAIMABLE ((__force gfp_t)___GFP_RECLAIMABLE) /* Page is reclaimable */
 #define __GFP_NOTRACK	((__force gfp_t)___GFP_NOTRACK)  /* Don't track with kmemcheck */
 
+#define __GFP_NO_KSWAPD	((__force gfp_t)___GFP_NO_KSWAPD)
 #define __GFP_OTHER_NODE ((__force gfp_t)___GFP_OTHER_NODE) /* On behalf of other node */
 #define __GFP_WRITE	((__force gfp_t)___GFP_WRITE)	/* Allocator intends to dirty page */
 
@@ -114,7 +116,8 @@
 				 __GFP_MOVABLE)
 #define GFP_IOFS	(__GFP_IO | __GFP_FS)
 #define GFP_TRANSHUGE	(GFP_HIGHUSER_MOVABLE | __GFP_COMP | \
-			 __GFP_NOMEMALLOC | __GFP_NORETRY | __GFP_NOWARN)
+			 __GFP_NOMEMALLOC | __GFP_NORETRY | __GFP_NOWARN | \
+			 __GFP_NO_KSWAPD)
 
 #ifdef CONFIG_NUMA
 #define GFP_THISNODE	(__GFP_THISNODE | __GFP_NOWARN | __GFP_NORETRY)
diff --git a/include/linux/gpio.h b/include/linux/gpio.h
index 2e31e8b..bfe6656 100644
--- a/include/linux/gpio.h
+++ b/include/linux/gpio.h
@@ -72,9 +72,9 @@
 	return -EINVAL;
 }
 
-#endif
+#endif /* ! CONFIG_ARCH_HAVE_CUSTOM_GPIO_H */
 
-#else
+#else /* ! CONFIG_GENERIC_GPIO */
 
 #include <linux/kernel.h>
 #include <linux/types.h>
@@ -231,6 +231,21 @@
 	return -EINVAL;
 }
 
-#endif
+static inline int
+gpiochip_add_pin_range(struct gpio_chip *chip, const char *pinctl_name,
+		       unsigned int gpio_offset, unsigned int pin_offset,
+		       unsigned int npins)
+{
+	WARN_ON(1);
+	return -EINVAL;
+}
+
+static inline void
+gpiochip_remove_pin_ranges(struct gpio_chip *chip)
+{
+	WARN_ON(1);
+}
+
+#endif /* ! CONFIG_GENERIC_GPIO */
 
 #endif /* __LINUX_GPIO_H */
diff --git a/include/linux/hw_breakpoint.h b/include/linux/hw_breakpoint.h
index 6ae9c63..0464c85 100644
--- a/include/linux/hw_breakpoint.h
+++ b/include/linux/hw_breakpoint.h
@@ -1,35 +1,8 @@
 #ifndef _LINUX_HW_BREAKPOINT_H
 #define _LINUX_HW_BREAKPOINT_H
 
-enum {
-	HW_BREAKPOINT_LEN_1 = 1,
-	HW_BREAKPOINT_LEN_2 = 2,
-	HW_BREAKPOINT_LEN_4 = 4,
-	HW_BREAKPOINT_LEN_8 = 8,
-};
-
-enum {
-	HW_BREAKPOINT_EMPTY	= 0,
-	HW_BREAKPOINT_R		= 1,
-	HW_BREAKPOINT_W		= 2,
-	HW_BREAKPOINT_RW	= HW_BREAKPOINT_R | HW_BREAKPOINT_W,
-	HW_BREAKPOINT_X		= 4,
-	HW_BREAKPOINT_INVALID   = HW_BREAKPOINT_RW | HW_BREAKPOINT_X,
-};
-
-enum bp_type_idx {
-	TYPE_INST 	= 0,
-#ifdef CONFIG_HAVE_MIXED_BREAKPOINTS_REGS
-	TYPE_DATA	= 0,
-#else
-	TYPE_DATA	= 1,
-#endif
-	TYPE_MAX
-};
-
-#ifdef __KERNEL__
-
 #include <linux/perf_event.h>
+#include <uapi/linux/hw_breakpoint.h>
 
 #ifdef CONFIG_HAVE_HW_BREAKPOINT
 
@@ -151,6 +124,4 @@
 }
 
 #endif /* CONFIG_HAVE_HW_BREAKPOINT */
-#endif /* __KERNEL__ */
-
 #endif /* _LINUX_HW_BREAKPOINT_H */
diff --git a/include/linux/i2c-omap.h b/include/linux/i2c-omap.h
index df804ba..92a0dc7 100644
--- a/include/linux/i2c-omap.h
+++ b/include/linux/i2c-omap.h
@@ -34,6 +34,7 @@
 	u32		clkrate;
 	u32		rev;
 	u32		flags;
+	void		(*set_mpu_wkup_lat)(struct device *dev, long set);
 };
 
 #endif
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index 800de22..d0c4db7 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -259,6 +259,7 @@
  * @platform_data: stored in i2c_client.dev.platform_data
  * @archdata: copied into i2c_client.dev.archdata
  * @of_node: pointer to OpenFirmware device node
+ * @acpi_node: ACPI device node
  * @irq: stored in i2c_client.irq
  *
  * I2C doesn't actually support hardware probing, although controllers and
@@ -279,6 +280,7 @@
 	void		*platform_data;
 	struct dev_archdata	*archdata;
 	struct device_node *of_node;
+	struct acpi_dev_node acpi_node;
 	int		irq;
 };
 
@@ -501,4 +503,11 @@
 			i2c_del_driver)
 
 #endif /* I2C */
+
+#if IS_ENABLED(CONFIG_ACPI_I2C)
+extern void acpi_i2c_register_devices(struct i2c_adapter *adap);
+#else
+static inline void acpi_i2c_register_devices(struct i2c_adapter *adap) {}
+#endif
+
 #endif /* _LINUX_I2C_H */
diff --git a/include/linux/i2c/pcf857x.h b/include/linux/i2c/pcf857x.h
index 781e6bd..0767a2a 100644
--- a/include/linux/i2c/pcf857x.h
+++ b/include/linux/i2c/pcf857x.h
@@ -10,7 +10,6 @@
  * @setup: optional callback issued once the GPIOs are valid
  * @teardown: optional callback issued before the GPIOs are invalidated
  * @context: optional parameter passed to setup() and teardown()
- * @irq: optional interrupt number
  *
  * In addition to the I2C_BOARD_INFO() state appropriate to each chip,
  * the i2c_board_info used with the pcf875x driver must provide its
@@ -40,8 +39,6 @@
 					int gpio, unsigned ngpio,
 					void *context);
 	void		*context;
-
-	int		irq;
 };
 
 #endif /* __LINUX_PCF857X_H */
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index a123b13..7d8dfc7 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -701,6 +701,13 @@
 #define COMPACTION_BUILD 0
 #endif
 
+/* This helps us to avoid #ifdef CONFIG_SYMBOL_PREFIX */
+#ifdef CONFIG_SYMBOL_PREFIX
+#define SYMBOL_PREFIX CONFIG_SYMBOL_PREFIX
+#else
+#define SYMBOL_PREFIX ""
+#endif
+
 /* Rebuild everything on CONFIG_FTRACE_MCOUNT_RECORD */
 #ifdef CONFIG_FTRACE_MCOUNT_RECORD
 # define REBUILD_DUE_TO_FTRACE_MCOUNT_RECORD
diff --git a/include/linux/mempolicy.h b/include/linux/mempolicy.h
index e5ccb9d..dbd2127 100644
--- a/include/linux/mempolicy.h
+++ b/include/linux/mempolicy.h
@@ -82,16 +82,6 @@
 		__mpol_put(pol);
 }
 
-extern struct mempolicy *__mpol_cond_copy(struct mempolicy *tompol,
-					  struct mempolicy *frompol);
-static inline struct mempolicy *mpol_cond_copy(struct mempolicy *tompol,
-						struct mempolicy *frompol)
-{
-	if (!frompol)
-		return frompol;
-	return __mpol_cond_copy(tompol, frompol);
-}
-
 extern struct mempolicy *__mpol_dup(struct mempolicy *pol);
 static inline struct mempolicy *mpol_dup(struct mempolicy *pol)
 {
@@ -215,12 +205,6 @@
 {
 }
 
-static inline struct mempolicy *mpol_cond_copy(struct mempolicy *to,
-						struct mempolicy *from)
-{
-	return from;
-}
-
 static inline void mpol_get(struct mempolicy *pol)
 {
 }
diff --git a/include/linux/mfd/db8500-prcmu.h b/include/linux/mfd/db8500-prcmu.h
index b82f6ee..6ee4247 100644
--- a/include/linux/mfd/db8500-prcmu.h
+++ b/include/linux/mfd/db8500-prcmu.h
@@ -515,7 +515,6 @@
 enum ap_pwrst prcmu_get_xp70_current_state(void);
 bool prcmu_has_arm_maxopp(void);
 struct prcmu_fw_version *prcmu_get_fw_version(void);
-int prcmu_request_ape_opp_100_voltage(bool enable);
 int prcmu_release_usb_wakeup_state(void);
 void prcmu_configure_auto_pm(struct prcmu_auto_pm_config *sleep,
 	struct prcmu_auto_pm_config *idle);
@@ -564,6 +563,7 @@
 int db8500_prcmu_get_arm_opp(void);
 int db8500_prcmu_set_ape_opp(u8 opp);
 int db8500_prcmu_get_ape_opp(void);
+int db8500_prcmu_request_ape_opp_100_voltage(bool enable);
 int db8500_prcmu_set_ddr_opp(u8 opp);
 int db8500_prcmu_get_ddr_opp(void);
 
@@ -610,7 +610,7 @@
 	return APE_100_OPP;
 }
 
-static inline int prcmu_request_ape_opp_100_voltage(bool enable)
+static inline int db8500_prcmu_request_ape_opp_100_voltage(bool enable)
 {
 	return 0;
 }
diff --git a/include/linux/mfd/dbx500-prcmu.h b/include/linux/mfd/dbx500-prcmu.h
index c410d99..c202d6c 100644
--- a/include/linux/mfd/dbx500-prcmu.h
+++ b/include/linux/mfd/dbx500-prcmu.h
@@ -336,6 +336,11 @@
 	return db8500_prcmu_get_ape_opp();
 }
 
+static inline int prcmu_request_ape_opp_100_voltage(bool enable)
+{
+	return db8500_prcmu_request_ape_opp_100_voltage(enable);
+}
+
 static inline void prcmu_system_reset(u16 reset_code)
 {
 	return db8500_prcmu_system_reset(reset_code);
@@ -507,6 +512,11 @@
 	return APE_100_OPP;
 }
 
+static inline int prcmu_request_ape_opp_100_voltage(bool enable)
+{
+	return 0;
+}
+
 static inline int prcmu_set_arm_opp(u8 opp)
 {
 	return 0;
diff --git a/include/linux/mm.h b/include/linux/mm.h
index fa06804..bcaab4e 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -1684,9 +1684,5 @@
 static inline bool page_is_guard(struct page *page) { return false; }
 #endif /* CONFIG_DEBUG_PAGEALLOC */
 
-extern void reset_zone_present_pages(void);
-extern void fixup_zone_present_pages(int nid, unsigned long start_pfn,
-				unsigned long end_pfn);
-
 #endif /* __KERNEL__ */
 #endif /* _LINUX_MM_H */
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
index 943550df..5c69315 100644
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -85,6 +85,7 @@
 	bool			boot_ro_lockable;
 	u8			raw_exception_status;	/* 53 */
 	u8			raw_partition_support;	/* 160 */
+	u8			raw_rpmb_size_mult;	/* 168 */
 	u8			raw_erased_mem_count;	/* 181 */
 	u8			raw_ext_csd_structure;	/* 194 */
 	u8			raw_card_type;		/* 196 */
@@ -206,6 +207,7 @@
 #define MMC_BLK_DATA_AREA_MAIN	(1<<0)
 #define MMC_BLK_DATA_AREA_BOOT	(1<<1)
 #define MMC_BLK_DATA_AREA_GP	(1<<2)
+#define MMC_BLK_DATA_AREA_RPMB	(1<<3)
 };
 
 /*
diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h
index 9b9cdaf..5bf7c22 100644
--- a/include/linux/mmc/core.h
+++ b/include/linux/mmc/core.h
@@ -170,6 +170,8 @@
 extern unsigned int mmc_calc_max_discard(struct mmc_card *card);
 
 extern int mmc_set_blocklen(struct mmc_card *card, unsigned int blocklen);
+extern int mmc_set_blockcount(struct mmc_card *card, unsigned int blockcount,
+			      bool is_rel_write);
 extern int mmc_hw_reset(struct mmc_host *host);
 extern int mmc_hw_reset_check(struct mmc_host *host);
 extern int mmc_can_reset(struct mmc_card *card);
diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h
index 9653166..34be4f4 100644
--- a/include/linux/mmc/dw_mmc.h
+++ b/include/linux/mmc/dw_mmc.h
@@ -229,8 +229,9 @@
 	u32 quirks; /* Workaround / Quirk flags */
 	unsigned int bus_hz; /* Clock speed at the cclk_in pad */
 
-	unsigned int caps;	/* Capabilities */
-	unsigned int caps2;	/* More capabilities */
+	u32 caps;	/* Capabilities */
+	u32 caps2;	/* More capabilities */
+	u32 pm_caps;	/* PM capabilities */
 	/*
 	 * Override fifo depth. If 0, autodetect it from the FIFOTH register,
 	 * but note that this may not be reliable after a bootloader has used
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index 7abb0e1..61a10c1 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -53,12 +53,12 @@
 #define MMC_TIMING_LEGACY	0
 #define MMC_TIMING_MMC_HS	1
 #define MMC_TIMING_SD_HS	2
-#define MMC_TIMING_UHS_SDR12	MMC_TIMING_LEGACY
-#define MMC_TIMING_UHS_SDR25	MMC_TIMING_SD_HS
-#define MMC_TIMING_UHS_SDR50	3
-#define MMC_TIMING_UHS_SDR104	4
-#define MMC_TIMING_UHS_DDR50	5
-#define MMC_TIMING_MMC_HS200	6
+#define MMC_TIMING_UHS_SDR12	3
+#define MMC_TIMING_UHS_SDR25	4
+#define MMC_TIMING_UHS_SDR50	5
+#define MMC_TIMING_UHS_SDR104	6
+#define MMC_TIMING_UHS_DDR50	7
+#define MMC_TIMING_MMC_HS200	8
 
 #define MMC_SDR_MODE		0
 #define MMC_1_2V_DDR_MODE	1
@@ -136,6 +136,7 @@
 	void	(*enable_preset_value)(struct mmc_host *host, bool enable);
 	int	(*select_drive_strength)(unsigned int max_dtr, int host_drv, int card_drv);
 	void	(*hw_reset)(struct mmc_host *host);
+	void	(*card_event)(struct mmc_host *host);
 };
 
 struct mmc_card;
@@ -211,7 +212,7 @@
 #define MMC_VDD_34_35		0x00400000	/* VDD voltage 3.4 ~ 3.5 */
 #define MMC_VDD_35_36		0x00800000	/* VDD voltage 3.5 ~ 3.6 */
 
-	unsigned long		caps;		/* Host capabilities */
+	u32			caps;		/* Host capabilities */
 
 #define MMC_CAP_4_BIT_DATA	(1 << 0)	/* Can the host do 4 bit transfers */
 #define MMC_CAP_MMC_HIGHSPEED	(1 << 1)	/* Can do MMC high-speed timing */
@@ -241,7 +242,7 @@
 #define MMC_CAP_CMD23		(1 << 30)	/* CMD23 supported. */
 #define MMC_CAP_HW_RESET	(1 << 31)	/* Hardware reset */
 
-	unsigned int		caps2;		/* More host capabilities */
+	u32			caps2;		/* More host capabilities */
 
 #define MMC_CAP2_BOOTPART_NOACC	(1 << 0)	/* Boot partition no access */
 #define MMC_CAP2_CACHE_CTRL	(1 << 1)	/* Allow cache control */
diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
index 01e4b39..94d532e 100644
--- a/include/linux/mmc/mmc.h
+++ b/include/linux/mmc/mmc.h
@@ -286,6 +286,7 @@
 #define EXT_CSD_BKOPS_START		164	/* W */
 #define EXT_CSD_SANITIZE_START		165     /* W */
 #define EXT_CSD_WR_REL_PARAM		166	/* RO */
+#define EXT_CSD_RPMB_MULT		168	/* RO */
 #define EXT_CSD_BOOT_WP			173	/* R/W */
 #define EXT_CSD_ERASE_GROUP_DEF		175	/* R/W */
 #define EXT_CSD_PART_CONFIG		179	/* R/W */
@@ -339,6 +340,7 @@
 
 #define EXT_CSD_PART_CONFIG_ACC_MASK	(0x7)
 #define EXT_CSD_PART_CONFIG_ACC_BOOT0	(0x1)
+#define EXT_CSD_PART_CONFIG_ACC_RPMB	(0x3)
 #define EXT_CSD_PART_CONFIG_ACC_GP0	(0x4)
 
 #define EXT_CSD_PART_SUPPORT_PART_EN	(0x1)
diff --git a/include/linux/mmc/mxs-mmc.h b/include/linux/mmc/mxs-mmc.h
deleted file mode 100644
index 7c2ad3a..0000000
--- a/include/linux/mmc/mxs-mmc.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __LINUX_MMC_MXS_MMC_H__
-#define __LINUX_MMC_MXS_MMC_H__
-
-struct mxs_mmc_platform_data {
-	int wp_gpio;	/* write protect pin */
-	unsigned int flags;
-#define SLOTF_4_BIT_CAPABLE	(1 << 0)
-#define SLOTF_8_BIT_CAPABLE	(1 << 1)
-};
-
-#endif /* __LINUX_MMC_MXS_MMC_H__ */
diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h
index 1edcb4d..4bbc330 100644
--- a/include/linux/mmc/sdhci.h
+++ b/include/linux/mmc/sdhci.h
@@ -92,6 +92,8 @@
 
 #define SDHCI_QUIRK2_HOST_OFF_CARD_ON			(1<<0)
 #define SDHCI_QUIRK2_HOST_NO_CMD23			(1<<1)
+/* The system physically doesn't support 1.8v, even if the host does */
+#define SDHCI_QUIRK2_NO_1_8_V				(1<<2)
 
 	int irq;		/* Device IRQ */
 	void __iomem *ioaddr;	/* Mapped address */
@@ -158,8 +160,8 @@
 
 	struct timer_list timer;	/* Timer for timeouts */
 
-	unsigned int caps;	/* Alternative CAPABILITY_0 */
-	unsigned int caps1;	/* Alternative CAPABILITY_1 */
+	u32 caps;		/* Alternative CAPABILITY_0 */
+	u32 caps1;		/* Alternative CAPABILITY_1 */
 
 	unsigned int            ocr_avail_sdio;	/* OCR bit masks */
 	unsigned int            ocr_avail_sd;
diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
index 50aaca8..a23923b 100644
--- a/include/linux/mmzone.h
+++ b/include/linux/mmzone.h
@@ -752,7 +752,7 @@
 				     unsigned long size,
 				     enum memmap_context context);
 
-extern void lruvec_init(struct lruvec *lruvec, struct zone *zone);
+extern void lruvec_init(struct lruvec *lruvec);
 
 static inline struct zone *lruvec_zone(struct lruvec *lruvec)
 {
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index f8eda02..a848ffc 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -1488,6 +1488,9 @@
 
 	/* Used in ipv6_gro_receive() */
 	int	proto;
+
+	/* used in skb_gro_receive() slow path */
+	struct sk_buff *last;
 };
 
 #define NAPI_GRO_CB(skb) ((struct napi_gro_cb *)(skb)->cb)
diff --git a/include/linux/of.h b/include/linux/of.h
index b4e50d5..60053bd 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -46,7 +46,7 @@
 	const char *name;
 	const char *type;
 	phandle phandle;
-	char	*full_name;
+	const char *full_name;
 
 	struct	property *properties;
 	struct	property *deadprops;	/* removed properties */
@@ -60,7 +60,7 @@
 	unsigned long _flags;
 	void	*data;
 #if defined(CONFIG_SPARC)
-	char	*path_component_name;
+	const char *path_component_name;
 	unsigned int unique_id;
 	struct of_irq_controller *irq_trans;
 #endif
@@ -88,14 +88,14 @@
 #ifdef CONFIG_OF
 
 /* Pointer for first entry in chain of all nodes. */
-extern struct device_node *allnodes;
+extern struct device_node *of_allnodes;
 extern struct device_node *of_chosen;
 extern struct device_node *of_aliases;
 extern rwlock_t devtree_lock;
 
 static inline bool of_have_populated_dt(void)
 {
-	return allnodes != NULL;
+	return of_allnodes != NULL;
 }
 
 static inline bool of_node_is_root(const struct device_node *node)
@@ -179,11 +179,22 @@
 #define for_each_compatible_node(dn, type, compatible) \
 	for (dn = of_find_compatible_node(NULL, type, compatible); dn; \
 	     dn = of_find_compatible_node(dn, type, compatible))
-extern struct device_node *of_find_matching_node(struct device_node *from,
-	const struct of_device_id *matches);
+extern struct device_node *of_find_matching_node_and_match(
+	struct device_node *from,
+	const struct of_device_id *matches,
+	const struct of_device_id **match);
+static inline struct device_node *of_find_matching_node(
+	struct device_node *from,
+	const struct of_device_id *matches)
+{
+	return of_find_matching_node_and_match(from, matches, NULL);
+}
 #define for_each_matching_node(dn, matches) \
 	for (dn = of_find_matching_node(NULL, matches); dn; \
 	     dn = of_find_matching_node(dn, matches))
+#define for_each_matching_node_and_match(dn, matches, match) \
+	for (dn = of_find_matching_node_and_match(NULL, matches, match); \
+	     dn; dn = of_find_matching_node_and_match(dn, matches, match))
 extern struct device_node *of_find_node_by_path(const char *path);
 extern struct device_node *of_find_node_by_phandle(phandle handle);
 extern struct device_node *of_get_parent(const struct device_node *node);
@@ -223,6 +234,10 @@
 extern struct property *of_find_property(const struct device_node *np,
 					 const char *name,
 					 int *lenp);
+extern int of_property_read_u8_array(const struct device_node *np,
+			const char *propname, u8 *out_values, size_t sz);
+extern int of_property_read_u16_array(const struct device_node *np,
+			const char *propname, u16 *out_values, size_t sz);
 extern int of_property_read_u32_array(const struct device_node *np,
 				      const char *propname,
 				      u32 *out_values,
@@ -255,7 +270,7 @@
 extern const struct of_device_id *of_match_node(
 	const struct of_device_id *matches, const struct device_node *node);
 extern int of_modalias_node(struct device_node *node, char *modalias, int len);
-extern struct device_node *of_parse_phandle(struct device_node *np,
+extern struct device_node *of_parse_phandle(const struct device_node *np,
 					    const char *phandle_name,
 					    int index);
 extern int of_parse_phandle_with_args(struct device_node *np,
@@ -364,6 +379,18 @@
 	return NULL;
 }
 
+static inline int of_property_read_u8_array(const struct device_node *np,
+			const char *propname, u8 *out_values, size_t sz)
+{
+	return -ENOSYS;
+}
+
+static inline int of_property_read_u16_array(const struct device_node *np,
+			const char *propname, u16 *out_values, size_t sz)
+{
+	return -ENOSYS;
+}
+
 static inline int of_property_read_u32_array(const struct device_node *np,
 					     const char *propname,
 					     u32 *out_values, size_t sz)
@@ -411,7 +438,7 @@
 	return -ENOSYS;
 }
 
-static inline struct device_node *of_parse_phandle(struct device_node *np,
+static inline struct device_node *of_parse_phandle(const struct device_node *np,
 						   const char *phandle_name,
 						   int index)
 {
@@ -470,6 +497,20 @@
 	return prop ? true : false;
 }
 
+static inline int of_property_read_u8(const struct device_node *np,
+				       const char *propname,
+				       u8 *out_value)
+{
+	return of_property_read_u8_array(np, propname, out_value, 1);
+}
+
+static inline int of_property_read_u16(const struct device_node *np,
+				       const char *propname,
+				       u16 *out_value)
+{
+	return of_property_read_u16_array(np, propname, out_value, 1);
+}
+
 static inline int of_property_read_u32(const struct device_node *np,
 				       const char *propname,
 				       u32 *out_value)
diff --git a/include/linux/of_address.h b/include/linux/of_address.h
index e20e3af..0506eb5 100644
--- a/include/linux/of_address.h
+++ b/include/linux/of_address.h
@@ -42,10 +42,12 @@
 {
 	return NULL;
 }
+#ifndef of_iomap
 static inline void __iomem *of_iomap(struct device_node *device, int index)
 {
 	return NULL;
 }
+#endif
 static inline const __be32 *of_get_address(struct device_node *dev, int index,
 					u64 *size, unsigned int *flags)
 {
diff --git a/include/linux/percpu-rwsem.h b/include/linux/percpu-rwsem.h
index 250a4ac..bd1e860 100644
--- a/include/linux/percpu-rwsem.h
+++ b/include/linux/percpu-rwsem.h
@@ -13,7 +13,7 @@
 };
 
 #define light_mb()	barrier()
-#define heavy_mb()	synchronize_sched()
+#define heavy_mb()	synchronize_sched_expedited()
 
 static inline void percpu_down_read(struct percpu_rw_semaphore *p)
 {
@@ -51,7 +51,7 @@
 {
 	mutex_lock(&p->mtx);
 	p->locked = true;
-	synchronize_sched(); /* make sure that all readers exit the rcu_read_lock_sched region */
+	synchronize_sched_expedited(); /* make sure that all readers exit the rcu_read_lock_sched region */
 	while (__percpu_count(p->counters))
 		msleep(1);
 	heavy_mb(); /* C, between read of p->counter and write to data, paired with B */
diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h
index 4f0abb9..47a1bdd 100644
--- a/include/linux/pinctrl/pinconf-generic.h
+++ b/include/linux/pinctrl/pinconf-generic.h
@@ -46,11 +46,11 @@
  * @PIN_CONFIG_DRIVE_OPEN_SOURCE: the pin will be driven with open source
  *	(open emitter). Sending this config will enabale open drain mode, the
  *	argument is ignored.
+ * @PIN_CONFIG_INPUT_SCHMITT_DISABLE: disable schmitt-trigger mode on the pin.
  * @PIN_CONFIG_INPUT_SCHMITT: this will configure an input pin to run in
  *	schmitt-trigger mode. If the schmitt-trigger has adjustable hysteresis,
  *	the threshold value is given on a custom format as argument when
- *	setting pins to this mode. The argument zero turns the schmitt trigger
- *	off.
+ *	setting pins to this mode.
  * @PIN_CONFIG_INPUT_DEBOUNCE: this will configure the pin to debounce mode,
  *	which means it will wait for signals to settle when reading inputs. The
  *	argument gives the debounce time on a custom format. Setting the
@@ -74,6 +74,7 @@
 	PIN_CONFIG_DRIVE_PUSH_PULL,
 	PIN_CONFIG_DRIVE_OPEN_DRAIN,
 	PIN_CONFIG_DRIVE_OPEN_SOURCE,
+	PIN_CONFIG_INPUT_SCHMITT_DISABLE,
 	PIN_CONFIG_INPUT_SCHMITT,
 	PIN_CONFIG_INPUT_DEBOUNCE,
 	PIN_CONFIG_POWER_SOURCE,
diff --git a/include/linux/pinctrl/pinctrl.h b/include/linux/pinctrl/pinctrl.h
index 7d087f0..04d6700 100644
--- a/include/linux/pinctrl/pinctrl.h
+++ b/include/linux/pinctrl/pinctrl.h
@@ -134,6 +134,25 @@
 extern void pinctrl_add_gpio_ranges(struct pinctrl_dev *pctldev,
 				struct pinctrl_gpio_range *ranges,
 				unsigned nranges);
+extern void pinctrl_remove_gpio_range(struct pinctrl_dev *pctldev,
+				struct pinctrl_gpio_range *range);
+
+extern struct pinctrl_dev *pinctrl_find_and_add_gpio_range(const char *devname,
+		struct pinctrl_gpio_range *range);
+extern struct pinctrl_gpio_range *
+pinctrl_find_gpio_range_from_pin(struct pinctrl_dev *pctldev,
+				 unsigned int pin);
+
+#ifdef CONFIG_OF
+extern struct pinctrl_dev *of_pinctrl_get(struct device_node *np);
+#else
+static inline
+struct pinctrl_dev *of_pinctrl_get(struct device_node *np)
+{
+	return NULL;
+}
+#endif /* CONFIG_OF */
+
 extern const char *pinctrl_dev_get_name(struct pinctrl_dev *pctldev);
 extern void *pinctrl_dev_get_drvdata(struct pinctrl_dev *pctldev);
 #else
diff --git a/include/linux/platform_data/ads7828.h b/include/linux/platform_data/ads7828.h
new file mode 100644
index 0000000..3245f45
--- /dev/null
+++ b/include/linux/platform_data/ads7828.h
@@ -0,0 +1,29 @@
+/*
+ * TI ADS7828 A/D Converter platform data definition
+ *
+ * Copyright (c) 2012 Savoir-faire Linux Inc.
+ *          Vivien Didelot <vivien.didelot@savoirfairelinux.com>
+ *
+ * For further information, see the Documentation/hwmon/ads7828 file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _PDATA_ADS7828_H
+#define _PDATA_ADS7828_H
+
+/**
+ * struct ads7828_platform_data - optional ADS7828 connectivity info
+ * @diff_input:		Differential input mode.
+ * @ext_vref:		Use an external voltage reference.
+ * @vref_mv:		Voltage reference value, if external.
+ */
+struct ads7828_platform_data {
+	bool diff_input;
+	bool ext_vref;
+	unsigned int vref_mv;
+};
+
+#endif /* _PDATA_ADS7828_H */
diff --git a/include/linux/platform_data/clk-integrator.h b/include/linux/platform_data/clk-integrator.h
index 83fe9c2..280edac 100644
--- a/include/linux/platform_data/clk-integrator.h
+++ b/include/linux/platform_data/clk-integrator.h
@@ -1 +1,3 @@
 void integrator_clk_init(bool is_cp);
+void integrator_impd1_clk_init(void __iomem *base, unsigned int id);
+void integrator_impd1_clk_exit(unsigned int id);
diff --git a/include/linux/platform_data/gpio-ts5500.h b/include/linux/platform_data/gpio-ts5500.h
new file mode 100644
index 0000000..b10d11c
--- /dev/null
+++ b/include/linux/platform_data/gpio-ts5500.h
@@ -0,0 +1,27 @@
+/*
+ * GPIO (DIO) header for Technologic Systems TS-5500
+ *
+ * Copyright (c) 2012 Savoir-faire Linux Inc.
+ *	Vivien Didelot <vivien.didelot@savoirfairelinux.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _PDATA_GPIO_TS5500_H
+#define _PDATA_GPIO_TS5500_H
+
+/**
+ * struct ts5500_dio_platform_data - TS-5500 pin block configuration
+ * @base:	The GPIO base number to use.
+ * @strap:	The only pin connected to an interrupt in a block is input-only.
+ *		If you need a bidirectional line which can trigger an IRQ, you
+ *		may strap it with an in/out pin. This flag indicates this case.
+ */
+struct ts5500_dio_platform_data {
+	int base;
+	bool strap;
+};
+
+#endif /* _PDATA_GPIO_TS5500_H */
diff --git a/include/linux/platform_data/omap_ocp2scp.h b/include/linux/platform_data/omap_ocp2scp.h
new file mode 100644
index 0000000..5c6c393
--- /dev/null
+++ b/include/linux/platform_data/omap_ocp2scp.h
@@ -0,0 +1,31 @@
+/*
+ * omap_ocp2scp.h -- ocp2scp header file
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __DRIVERS_OMAP_OCP2SCP_H
+#define __DRIVERS_OMAP_OCP2SCP_H
+
+struct omap_ocp2scp_dev {
+	const char			*drv_name;
+	struct resource			*res;
+};
+
+struct omap_ocp2scp_platform_data {
+	int				dev_cnt;
+	struct omap_ocp2scp_dev		**devices;
+};
+#endif /* __DRIVERS_OMAP_OCP2SCP_H */
diff --git a/include/linux/platform_data/pinctrl-coh901.h b/include/linux/platform_data/pinctrl-coh901.h
index 30dea25..dfbc65d 100644
--- a/include/linux/platform_data/pinctrl-coh901.h
+++ b/include/linux/platform_data/pinctrl-coh901.h
@@ -13,14 +13,10 @@
  * struct u300_gpio_platform - U300 GPIO platform data
  * @ports: number of GPIO block ports
  * @gpio_base: first GPIO number for this block (use a free range)
- * @gpio_irq_base: first GPIO IRQ number for this block (use a free range)
- * @pinctrl_device: pin control device to spawn as child
  */
 struct u300_gpio_platform {
 	u8 ports;
 	int gpio_base;
-	int gpio_irq_base;
-	struct platform_device *pinctrl_device;
 };
 
 #endif /* __MACH_U300_GPIO_U300_H */
diff --git a/arch/arm/plat-nomadik/include/plat/pincfg.h b/include/linux/platform_data/pinctrl-nomadik.h
similarity index 65%
rename from arch/arm/plat-nomadik/include/plat/pincfg.h
rename to include/linux/platform_data/pinctrl-nomadik.h
index 3b8ec60..f73b2f0 100644
--- a/arch/arm/plat-nomadik/include/plat/pincfg.h
+++ b/include/linux/platform_data/pinctrl-nomadik.h
@@ -1,16 +1,17 @@
 /*
- * Copyright (C) ST-Ericsson SA 2010
+ * Structures and registers for GPIO access in the Nomadik SoC
  *
- * License terms: GNU General Public License, version 2
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ * Copyright (C) 2008 STMicroelectronics
+ *     Author: Prafulla WADASKAR <prafulla.wadaskar@st.com>
+ * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it>
  *
- * Based on arch/arm/mach-pxa/include/mach/mfp.h:
- *   Copyright (C) 2007 Marvell International Ltd.
- *   eric miao <eric.miao@marvell.com>
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
  */
 
-#ifndef __PLAT_PINCFG_H
-#define __PLAT_PINCFG_H
+#ifndef __PLAT_NOMADIK_GPIO
+#define __PLAT_NOMADIK_GPIO
 
 /*
  * pin configurations are represented by 32-bit integers:
@@ -166,8 +167,100 @@
 	(PIN_CFG_DEFAULT |\
 	 (PIN_NUM(num) | PIN_##alt | PIN_OUTPUT_##val))
 
+/*
+ * "nmk_gpio" and "NMK_GPIO" stand for "Nomadik GPIO", leaving
+ * the "gpio" namespace for generic and cross-machine functions
+ */
+
+#define GPIO_BLOCK_SHIFT 5
+#define NMK_GPIO_PER_CHIP (1 << GPIO_BLOCK_SHIFT)
+
+/* Register in the logic block */
+#define NMK_GPIO_DAT	0x00
+#define NMK_GPIO_DATS	0x04
+#define NMK_GPIO_DATC	0x08
+#define NMK_GPIO_PDIS	0x0c
+#define NMK_GPIO_DIR	0x10
+#define NMK_GPIO_DIRS	0x14
+#define NMK_GPIO_DIRC	0x18
+#define NMK_GPIO_SLPC	0x1c
+#define NMK_GPIO_AFSLA	0x20
+#define NMK_GPIO_AFSLB	0x24
+#define NMK_GPIO_LOWEMI	0x28
+
+#define NMK_GPIO_RIMSC	0x40
+#define NMK_GPIO_FIMSC	0x44
+#define NMK_GPIO_IS	0x48
+#define NMK_GPIO_IC	0x4c
+#define NMK_GPIO_RWIMSC	0x50
+#define NMK_GPIO_FWIMSC	0x54
+#define NMK_GPIO_WKS	0x58
+/* These appear in DB8540 and later ASICs */
+#define NMK_GPIO_EDGELEVEL 0x5C
+#define NMK_GPIO_LEVEL	0x60
+
+/* Alternate functions: function C is set in hw by setting both A and B */
+#define NMK_GPIO_ALT_GPIO	0
+#define NMK_GPIO_ALT_A	1
+#define NMK_GPIO_ALT_B	2
+#define NMK_GPIO_ALT_C	(NMK_GPIO_ALT_A | NMK_GPIO_ALT_B)
+
+#define NMK_GPIO_ALT_CX_SHIFT 2
+#define NMK_GPIO_ALT_C1	((1<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C)
+#define NMK_GPIO_ALT_C2	((2<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C)
+#define NMK_GPIO_ALT_C3	((3<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C)
+#define NMK_GPIO_ALT_C4	((4<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C)
+
+/* Pull up/down values */
+enum nmk_gpio_pull {
+	NMK_GPIO_PULL_NONE,
+	NMK_GPIO_PULL_UP,
+	NMK_GPIO_PULL_DOWN,
+};
+
+/* Sleep mode */
+enum nmk_gpio_slpm {
+	NMK_GPIO_SLPM_INPUT,
+	NMK_GPIO_SLPM_WAKEUP_ENABLE = NMK_GPIO_SLPM_INPUT,
+	NMK_GPIO_SLPM_NOCHANGE,
+	NMK_GPIO_SLPM_WAKEUP_DISABLE = NMK_GPIO_SLPM_NOCHANGE,
+};
+
+/* Older deprecated pin config API that should go away soon */
 extern int nmk_config_pin(pin_cfg_t cfg, bool sleep);
 extern int nmk_config_pins(pin_cfg_t *cfgs, int num);
 extern int nmk_config_pins_sleep(pin_cfg_t *cfgs, int num);
-
+extern int nmk_gpio_set_slpm(int gpio, enum nmk_gpio_slpm mode);
+extern int nmk_gpio_set_pull(int gpio, enum nmk_gpio_pull pull);
+#ifdef CONFIG_PINCTRL_NOMADIK
+extern int nmk_gpio_set_mode(int gpio, int gpio_mode);
+#else
+static inline int nmk_gpio_set_mode(int gpio, int gpio_mode)
+{
+	return -ENODEV;
+}
 #endif
+extern int nmk_gpio_get_mode(int gpio);
+
+extern void nmk_gpio_wakeups_suspend(void);
+extern void nmk_gpio_wakeups_resume(void);
+
+extern void nmk_gpio_clocks_enable(void);
+extern void nmk_gpio_clocks_disable(void);
+
+extern void nmk_gpio_read_pull(int gpio_bank, u32 *pull_up);
+
+/*
+ * Platform data to register a block: only the initial gpio/irq number.
+ */
+struct nmk_gpio_platform_data {
+	char *name;
+	int first_gpio;
+	int first_irq;
+	int num_gpio;
+	u32 (*get_secondary_status)(unsigned int bank);
+	void (*set_ioforce)(bool enable);
+	bool supports_sleepmode;
+};
+
+#endif /* __PLAT_NOMADIK_GPIO */
diff --git a/include/linux/platform_data/pxa_sdhci.h b/include/linux/platform_data/pxa_sdhci.h
index 59acd98..27d3156 100644
--- a/include/linux/platform_data/pxa_sdhci.h
+++ b/include/linux/platform_data/pxa_sdhci.h
@@ -38,6 +38,7 @@
  * @max_speed: the maximum speed supported
  * @host_caps: Standard MMC host capabilities bit field.
  * @quirks: quirks of platfrom
+ * @quirks2: quirks2 of platfrom
  * @pm_caps: pm_caps of platfrom
  */
 struct sdhci_pxa_platdata {
@@ -48,9 +49,10 @@
 	unsigned int	ext_cd_gpio;
 	bool		ext_cd_gpio_invert;
 	unsigned int	max_speed;
-	unsigned int	host_caps;
-	unsigned int	host_caps2;
+	u32		host_caps;
+	u32		host_caps2;
 	unsigned int	quirks;
+	unsigned int	quirks2;
 	unsigned int	pm_caps;
 };
 
diff --git a/include/linux/platform_device.h b/include/linux/platform_device.h
index 5711e95..a9ded9a 100644
--- a/include/linux/platform_device.h
+++ b/include/linux/platform_device.h
@@ -55,6 +55,7 @@
 
 struct platform_device_info {
 		struct device *parent;
+		struct acpi_dev_node acpi_node;
 
 		const char *name;
 		int id;
diff --git a/include/linux/pm.h b/include/linux/pm.h
index 007e687..03d7bb1 100644
--- a/include/linux/pm.h
+++ b/include/linux/pm.h
@@ -546,10 +546,9 @@
 	unsigned long		active_jiffies;
 	unsigned long		suspended_jiffies;
 	unsigned long		accounting_timestamp;
-	struct dev_pm_qos_request *pq_req;
 #endif
 	struct pm_subsys_data	*subsys_data;  /* Owned by the subsystem. */
-	struct pm_qos_constraints *constraints;
+	struct dev_pm_qos	*qos;
 };
 
 extern void update_pm_runtime_accounting(struct device *dev);
diff --git a/include/linux/pm_qos.h b/include/linux/pm_qos.h
index 9924ea1..5a95013 100644
--- a/include/linux/pm_qos.h
+++ b/include/linux/pm_qos.h
@@ -20,6 +20,13 @@
 	PM_QOS_NUM_CLASSES,
 };
 
+enum pm_qos_flags_status {
+	PM_QOS_FLAGS_UNDEFINED = -1,
+	PM_QOS_FLAGS_NONE,
+	PM_QOS_FLAGS_SOME,
+	PM_QOS_FLAGS_ALL,
+};
+
 #define PM_QOS_DEFAULT_VALUE -1
 
 #define PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE	(2000 * USEC_PER_SEC)
@@ -27,14 +34,31 @@
 #define PM_QOS_NETWORK_THROUGHPUT_DEFAULT_VALUE	0
 #define PM_QOS_DEV_LAT_DEFAULT_VALUE		0
 
+#define PM_QOS_FLAG_NO_POWER_OFF	(1 << 0)
+#define PM_QOS_FLAG_REMOTE_WAKEUP	(1 << 1)
+
 struct pm_qos_request {
 	struct plist_node node;
 	int pm_qos_class;
 	struct delayed_work work; /* for pm_qos_update_request_timeout */
 };
 
+struct pm_qos_flags_request {
+	struct list_head node;
+	s32 flags;	/* Do not change to 64 bit */
+};
+
+enum dev_pm_qos_req_type {
+	DEV_PM_QOS_LATENCY = 1,
+	DEV_PM_QOS_FLAGS,
+};
+
 struct dev_pm_qos_request {
-	struct plist_node node;
+	enum dev_pm_qos_req_type type;
+	union {
+		struct plist_node pnode;
+		struct pm_qos_flags_request flr;
+	} data;
 	struct device *dev;
 };
 
@@ -45,8 +69,8 @@
 };
 
 /*
- * Note: The lockless read path depends on the CPU accessing
- * target_value atomically.  Atomic access is only guaranteed on all CPU
+ * Note: The lockless read path depends on the CPU accessing target_value
+ * or effective_flags atomically.  Atomic access is only guaranteed on all CPU
  * types linux supports for 32 bit quantites
  */
 struct pm_qos_constraints {
@@ -57,6 +81,18 @@
 	struct blocking_notifier_head *notifiers;
 };
 
+struct pm_qos_flags {
+	struct list_head list;
+	s32 effective_flags;	/* Do not change to 64 bit */
+};
+
+struct dev_pm_qos {
+	struct pm_qos_constraints latency;
+	struct pm_qos_flags flags;
+	struct dev_pm_qos_request *latency_req;
+	struct dev_pm_qos_request *flags_req;
+};
+
 /* Action requested to pm_qos_update_target */
 enum pm_qos_req_action {
 	PM_QOS_ADD_REQ,		/* Add a new request */
@@ -71,6 +107,9 @@
 
 int pm_qos_update_target(struct pm_qos_constraints *c, struct plist_node *node,
 			 enum pm_qos_req_action action, int value);
+bool pm_qos_update_flags(struct pm_qos_flags *pqf,
+			 struct pm_qos_flags_request *req,
+			 enum pm_qos_req_action action, s32 val);
 void pm_qos_add_request(struct pm_qos_request *req, int pm_qos_class,
 			s32 value);
 void pm_qos_update_request(struct pm_qos_request *req,
@@ -86,10 +125,12 @@
 s32 pm_qos_read_value(struct pm_qos_constraints *c);
 
 #ifdef CONFIG_PM
+enum pm_qos_flags_status __dev_pm_qos_flags(struct device *dev, s32 mask);
+enum pm_qos_flags_status dev_pm_qos_flags(struct device *dev, s32 mask);
 s32 __dev_pm_qos_read_value(struct device *dev);
 s32 dev_pm_qos_read_value(struct device *dev);
 int dev_pm_qos_add_request(struct device *dev, struct dev_pm_qos_request *req,
-			   s32 value);
+			   enum dev_pm_qos_req_type type, s32 value);
 int dev_pm_qos_update_request(struct dev_pm_qos_request *req, s32 new_value);
 int dev_pm_qos_remove_request(struct dev_pm_qos_request *req);
 int dev_pm_qos_add_notifier(struct device *dev,
@@ -103,12 +144,19 @@
 int dev_pm_qos_add_ancestor_request(struct device *dev,
 				    struct dev_pm_qos_request *req, s32 value);
 #else
+static inline enum pm_qos_flags_status __dev_pm_qos_flags(struct device *dev,
+							  s32 mask)
+			{ return PM_QOS_FLAGS_UNDEFINED; }
+static inline enum pm_qos_flags_status dev_pm_qos_flags(struct device *dev,
+							s32 mask)
+			{ return PM_QOS_FLAGS_UNDEFINED; }
 static inline s32 __dev_pm_qos_read_value(struct device *dev)
 			{ return 0; }
 static inline s32 dev_pm_qos_read_value(struct device *dev)
 			{ return 0; }
 static inline int dev_pm_qos_add_request(struct device *dev,
 					 struct dev_pm_qos_request *req,
+					 enum dev_pm_qos_req_type type,
 					 s32 value)
 			{ return 0; }
 static inline int dev_pm_qos_update_request(struct dev_pm_qos_request *req,
@@ -144,10 +192,31 @@
 #ifdef CONFIG_PM_RUNTIME
 int dev_pm_qos_expose_latency_limit(struct device *dev, s32 value);
 void dev_pm_qos_hide_latency_limit(struct device *dev);
+int dev_pm_qos_expose_flags(struct device *dev, s32 value);
+void dev_pm_qos_hide_flags(struct device *dev);
+int dev_pm_qos_update_flags(struct device *dev, s32 mask, bool set);
+
+static inline s32 dev_pm_qos_requested_latency(struct device *dev)
+{
+	return dev->power.qos->latency_req->data.pnode.prio;
+}
+
+static inline s32 dev_pm_qos_requested_flags(struct device *dev)
+{
+	return dev->power.qos->flags_req->data.flr.flags;
+}
 #else
 static inline int dev_pm_qos_expose_latency_limit(struct device *dev, s32 value)
 			{ return 0; }
 static inline void dev_pm_qos_hide_latency_limit(struct device *dev) {}
+static inline int dev_pm_qos_expose_flags(struct device *dev, s32 value)
+			{ return 0; }
+static inline void dev_pm_qos_hide_flags(struct device *dev) {}
+static inline int dev_pm_qos_update_flags(struct device *dev, s32 m, bool set)
+			{ return 0; }
+
+static inline s32 dev_pm_qos_requested_latency(struct device *dev) { return 0; }
+static inline s32 dev_pm_qos_requested_flags(struct device *dev) { return 0; }
 #endif
 
 #endif
diff --git a/include/linux/rio.h b/include/linux/rio.h
index 4187da5..a3e7842 100644
--- a/include/linux/rio.h
+++ b/include/linux/rio.h
@@ -275,9 +275,11 @@
  * struct rio_net - RIO network info
  * @node: Node in global list of RIO networks
  * @devices: List of devices in this network
+ * @switches: List of switches in this netowrk
  * @mports: List of master ports accessing this network
  * @hport: Default port for accessing this network
  * @id: RIO network ID
+ * @destid_table: destID allocation table
  */
 struct rio_net {
 	struct list_head node;	/* node in list of networks */
diff --git a/include/linux/spi/ads7846.h b/include/linux/spi/ads7846.h
index c64de9d..2f694f3 100644
--- a/include/linux/spi/ads7846.h
+++ b/include/linux/spi/ads7846.h
@@ -46,8 +46,9 @@
 	u16	debounce_rep;		/* additional consecutive good readings
 					 * required after the first two */
 	int	gpio_pendown;		/* the GPIO used to decide the pendown
-					 * state if get_pendown_state == NULL
-					 */
+					 * state if get_pendown_state == NULL */
+	int	gpio_pendown_debounce;	/* platform specific debounce time for
+					 * the gpio_pendown */
 	int	(*get_pendown_state)(void);
 	int	(*filter_init)	(const struct ads7846_platform_data *pdata,
 				 void **filter_data);
diff --git a/include/linux/tick.h b/include/linux/tick.h
index f37fceb..1a6567b 100644
--- a/include/linux/tick.h
+++ b/include/linux/tick.h
@@ -142,4 +142,10 @@
 static inline u64 get_cpu_iowait_time_us(int cpu, u64 *unused) { return -1; }
 # endif /* !NO_HZ */
 
+# ifdef CONFIG_CPU_IDLE_GOV_MENU
+extern void menu_hrtimer_cancel(void);
+# else
+static inline void menu_hrtimer_cancel(void) {}
+# endif /* CONFIG_CPU_IDLE_GOV_MENU */
+
 #endif
diff --git a/include/media/adv7604.h b/include/media/adv7604.h
index 171b957..dc004bc 100644
--- a/include/media/adv7604.h
+++ b/include/media/adv7604.h
@@ -40,14 +40,6 @@
 	ADV7604_OP_CH_SEL_RBG = 5,
 };
 
-/* Primary mode (IO register 0x01, [3:0]) */
-enum adv7604_prim_mode {
-	ADV7604_PRIM_MODE_COMP = 1,
-	ADV7604_PRIM_MODE_RGB = 2,
-	ADV7604_PRIM_MODE_HDMI_COMP = 5,
-	ADV7604_PRIM_MODE_HDMI_GR = 6,
-};
-
 /* Input Color Space (IO register 0x02, [7:4]) */
 enum adv7604_inp_color_space {
 	ADV7604_INP_COLOR_SPACE_LIM_RGB = 0,
@@ -103,9 +95,6 @@
 	/* Bus rotation and reordering */
 	enum adv7604_op_ch_sel op_ch_sel;
 
-	/* Primary mode */
-	enum adv7604_prim_mode prim_mode;
-
 	/* Select output format */
 	enum adv7604_op_format_sel op_format_sel;
 
@@ -142,6 +131,16 @@
 	u8 i2c_vdp;
 };
 
+/*
+ * Mode of operation.
+ * This is used as the input argument of the s_routing video op.
+ */
+enum adv7604_mode {
+	ADV7604_MODE_COMP,
+	ADV7604_MODE_GR,
+	ADV7604_MODE_HDMI,
+};
+
 #define V4L2_CID_ADV_RX_ANALOG_SAMPLING_PHASE	(V4L2_CID_DV_CLASS_BASE + 0x1000)
 #define V4L2_CID_ADV_RX_FREE_RUN_COLOR_MANUAL	(V4L2_CID_DV_CLASS_BASE + 0x1001)
 #define V4L2_CID_ADV_RX_FREE_RUN_COLOR		(V4L2_CID_DV_CLASS_BASE + 0x1002)
diff --git a/include/net/tcp.h b/include/net/tcp.h
index 6feeccd..4af45e3 100644
--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -525,6 +525,7 @@
 extern void __tcp_push_pending_frames(struct sock *sk, unsigned int cur_mss,
 				      int nonagle);
 extern bool tcp_may_send_now(struct sock *sk);
+extern int __tcp_retransmit_skb(struct sock *, struct sk_buff *);
 extern int tcp_retransmit_skb(struct sock *, struct sk_buff *);
 extern void tcp_retransmit_timer(struct sock *sk);
 extern void tcp_xmit_retransmit_queue(struct sock *);
diff --git a/include/net/xfrm.h b/include/net/xfrm.h
index 6f0ba01..63445ed 100644
--- a/include/net/xfrm.h
+++ b/include/net/xfrm.h
@@ -1351,7 +1351,7 @@
 };
 
 extern void xfrm_init(void);
-extern void xfrm4_init(int rt_hash_size);
+extern void xfrm4_init(void);
 extern int xfrm_state_init(struct net *net);
 extern void xfrm_state_fini(struct net *net);
 extern void xfrm4_state_init(void);
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index 88fae8d..55367b0 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -135,6 +135,8 @@
 				     * because we did a bus reset. */
 	unsigned use_10_for_rw:1; /* first try 10-byte read / write */
 	unsigned use_10_for_ms:1; /* first try 10-byte mode sense/select */
+	unsigned no_report_opcodes:1;	/* no REPORT SUPPORTED OPERATION CODES */
+	unsigned no_write_same:1;	/* no WRITE SAME command */
 	unsigned skip_ms_page_8:1;	/* do not use MODE SENSE page 0x08 */
 	unsigned skip_ms_page_3f:1;	/* do not use MODE SENSE page 0x3f */
 	unsigned skip_vpd_pages:1;	/* do not read VPD pages */
@@ -362,6 +364,8 @@
 				int retries, struct scsi_sense_hdr *sshdr);
 extern int scsi_get_vpd_page(struct scsi_device *, u8 page, unsigned char *buf,
 			     int buf_len);
+extern int scsi_report_opcode(struct scsi_device *sdev, unsigned char *buffer,
+			      unsigned int len, unsigned char opcode);
 extern int scsi_device_set_state(struct scsi_device *sdev,
 				 enum scsi_device_state state);
 extern struct scsi_event *sdev_evt_alloc(enum scsi_device_event evt_type,
diff --git a/include/trace/events/gfpflags.h b/include/trace/events/gfpflags.h
index 9391706..d6fd8e5 100644
--- a/include/trace/events/gfpflags.h
+++ b/include/trace/events/gfpflags.h
@@ -36,6 +36,7 @@
 	{(unsigned long)__GFP_RECLAIMABLE,	"GFP_RECLAIMABLE"},	\
 	{(unsigned long)__GFP_MOVABLE,		"GFP_MOVABLE"},		\
 	{(unsigned long)__GFP_NOTRACK,		"GFP_NOTRACK"},		\
+	{(unsigned long)__GFP_NO_KSWAPD,	"GFP_NO_KSWAPD"},	\
 	{(unsigned long)__GFP_OTHER_NODE,	"GFP_OTHER_NODE"}	\
 	) : "GFP_NOWAIT"
 
diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild
index e194387..19e765f 100644
--- a/include/uapi/linux/Kbuild
+++ b/include/uapi/linux/Kbuild
@@ -415,3 +415,4 @@
 header-y += x25.h
 header-y += xattr.h
 header-y += xfrm.h
+header-y += hw_breakpoint.h
diff --git a/include/uapi/linux/hw_breakpoint.h b/include/uapi/linux/hw_breakpoint.h
new file mode 100644
index 0000000..b04000a
--- /dev/null
+++ b/include/uapi/linux/hw_breakpoint.h
@@ -0,0 +1,30 @@
+#ifndef _UAPI_LINUX_HW_BREAKPOINT_H
+#define _UAPI_LINUX_HW_BREAKPOINT_H
+
+enum {
+	HW_BREAKPOINT_LEN_1 = 1,
+	HW_BREAKPOINT_LEN_2 = 2,
+	HW_BREAKPOINT_LEN_4 = 4,
+	HW_BREAKPOINT_LEN_8 = 8,
+};
+
+enum {
+	HW_BREAKPOINT_EMPTY	= 0,
+	HW_BREAKPOINT_R		= 1,
+	HW_BREAKPOINT_W		= 2,
+	HW_BREAKPOINT_RW	= HW_BREAKPOINT_R | HW_BREAKPOINT_W,
+	HW_BREAKPOINT_X		= 4,
+	HW_BREAKPOINT_INVALID   = HW_BREAKPOINT_RW | HW_BREAKPOINT_X,
+};
+
+enum bp_type_idx {
+	TYPE_INST 	= 0,
+#ifdef CONFIG_HAVE_MIXED_BREAKPOINTS_REGS
+	TYPE_DATA	= 0,
+#else
+	TYPE_DATA	= 1,
+#endif
+	TYPE_MAX
+};
+
+#endif /* _UAPI_LINUX_HW_BREAKPOINT_H */
diff --git a/include/uapi/linux/oom.h b/include/uapi/linux/oom.h
index a49c4af..b29272d 100644
--- a/include/uapi/linux/oom.h
+++ b/include/uapi/linux/oom.h
@@ -8,4 +8,13 @@
 #define OOM_SCORE_ADJ_MIN	(-1000)
 #define OOM_SCORE_ADJ_MAX	1000
 
+/*
+ * /proc/<pid>/oom_adj set to -17 protects from the oom killer for legacy
+ * purposes.
+ */
+#define OOM_DISABLE (-17)
+/* inclusive */
+#define OOM_ADJUST_MIN (-16)
+#define OOM_ADJUST_MAX 15
+
 #endif /* _UAPI__INCLUDE_LINUX_OOM_H */
diff --git a/kernel/cpu.c b/kernel/cpu.c
index 42bd331..f45657f 100644
--- a/kernel/cpu.c
+++ b/kernel/cpu.c
@@ -348,11 +348,13 @@
 	unsigned long mod = tasks_frozen ? CPU_TASKS_FROZEN : 0;
 	struct task_struct *idle;
 
-	if (cpu_online(cpu) || !cpu_present(cpu))
-		return -EINVAL;
-
 	cpu_hotplug_begin();
 
+	if (cpu_online(cpu) || !cpu_present(cpu)) {
+		ret = -EINVAL;
+		goto out;
+	}
+
 	idle = idle_thread_get(cpu);
 	if (IS_ERR(idle)) {
 		ret = PTR_ERR(idle);
diff --git a/kernel/events/hw_breakpoint.c b/kernel/events/hw_breakpoint.c
index 9a7b487..fe8a916 100644
--- a/kernel/events/hw_breakpoint.c
+++ b/kernel/events/hw_breakpoint.c
@@ -111,14 +111,16 @@
  * Count the number of breakpoints of the same type and same task.
  * The given event must be not on the list.
  */
-static int task_bp_pinned(struct perf_event *bp, enum bp_type_idx type)
+static int task_bp_pinned(int cpu, struct perf_event *bp, enum bp_type_idx type)
 {
 	struct task_struct *tsk = bp->hw.bp_target;
 	struct perf_event *iter;
 	int count = 0;
 
 	list_for_each_entry(iter, &bp_task_head, hw.bp_list) {
-		if (iter->hw.bp_target == tsk && find_slot_idx(iter) == type)
+		if (iter->hw.bp_target == tsk &&
+		    find_slot_idx(iter) == type &&
+		    cpu == iter->cpu)
 			count += hw_breakpoint_weight(iter);
 	}
 
@@ -141,7 +143,7 @@
 		if (!tsk)
 			slots->pinned += max_task_bp_pinned(cpu, type);
 		else
-			slots->pinned += task_bp_pinned(bp, type);
+			slots->pinned += task_bp_pinned(cpu, bp, type);
 		slots->flexible = per_cpu(nr_bp_flexible[type], cpu);
 
 		return;
@@ -154,7 +156,7 @@
 		if (!tsk)
 			nr += max_task_bp_pinned(cpu, type);
 		else
-			nr += task_bp_pinned(bp, type);
+			nr += task_bp_pinned(cpu, bp, type);
 
 		if (nr > slots->pinned)
 			slots->pinned = nr;
@@ -188,7 +190,7 @@
 	int old_idx = 0;
 	int idx = 0;
 
-	old_count = task_bp_pinned(bp, type);
+	old_count = task_bp_pinned(cpu, bp, type);
 	old_idx = old_count - 1;
 	idx = old_idx + weight;
 
diff --git a/kernel/futex.c b/kernel/futex.c
index 3717e7b..19eb089 100644
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -716,7 +716,7 @@
 				struct futex_pi_state **ps,
 				struct task_struct *task, int set_waiters)
 {
-	int lock_taken, ret, ownerdied = 0;
+	int lock_taken, ret, force_take = 0;
 	u32 uval, newval, curval, vpid = task_pid_vnr(task);
 
 retry:
@@ -755,17 +755,15 @@
 	newval = curval | FUTEX_WAITERS;
 
 	/*
-	 * There are two cases, where a futex might have no owner (the
-	 * owner TID is 0): OWNER_DIED. We take over the futex in this
-	 * case. We also do an unconditional take over, when the owner
-	 * of the futex died.
-	 *
-	 * This is safe as we are protected by the hash bucket lock !
+	 * Should we force take the futex? See below.
 	 */
-	if (unlikely(ownerdied || !(curval & FUTEX_TID_MASK))) {
-		/* Keep the OWNER_DIED bit */
+	if (unlikely(force_take)) {
+		/*
+		 * Keep the OWNER_DIED and the WAITERS bit and set the
+		 * new TID value.
+		 */
 		newval = (curval & ~FUTEX_TID_MASK) | vpid;
-		ownerdied = 0;
+		force_take = 0;
 		lock_taken = 1;
 	}
 
@@ -775,7 +773,7 @@
 		goto retry;
 
 	/*
-	 * We took the lock due to owner died take over.
+	 * We took the lock due to forced take over.
 	 */
 	if (unlikely(lock_taken))
 		return 1;
@@ -790,20 +788,25 @@
 		switch (ret) {
 		case -ESRCH:
 			/*
-			 * No owner found for this futex. Check if the
-			 * OWNER_DIED bit is set to figure out whether
-			 * this is a robust futex or not.
+			 * We failed to find an owner for this
+			 * futex. So we have no pi_state to block
+			 * on. This can happen in two cases:
+			 *
+			 * 1) The owner died
+			 * 2) A stale FUTEX_WAITERS bit
+			 *
+			 * Re-read the futex value.
 			 */
 			if (get_futex_value_locked(&curval, uaddr))
 				return -EFAULT;
 
 			/*
-			 * We simply start over in case of a robust
-			 * futex. The code above will take the futex
-			 * and return happy.
+			 * If the owner died or we have a stale
+			 * WAITERS bit the owner TID in the user space
+			 * futex is 0.
 			 */
-			if (curval & FUTEX_OWNER_DIED) {
-				ownerdied = 1;
+			if (!(curval & FUTEX_TID_MASK)) {
+				force_take = 1;
 				goto retry;
 			}
 		default:
@@ -840,6 +843,9 @@
 {
 	struct task_struct *p = q->task;
 
+	if (WARN(q->pi_state || q->rt_waiter, "refusing to wake PI futex\n"))
+		return;
+
 	/*
 	 * We set q->lock_ptr = NULL _before_ we wake up the task. If
 	 * a non-futex wake up happens on another CPU then the task
@@ -1075,6 +1081,10 @@
 
 	plist_for_each_entry_safe(this, next, head, list) {
 		if (match_futex (&this->key, &key1)) {
+			if (this->pi_state || this->rt_waiter) {
+				ret = -EINVAL;
+				goto out_unlock;
+			}
 			wake_futex(this);
 			if (++ret >= nr_wake)
 				break;
@@ -1087,6 +1097,10 @@
 		op_ret = 0;
 		plist_for_each_entry_safe(this, next, head, list) {
 			if (match_futex (&this->key, &key2)) {
+				if (this->pi_state || this->rt_waiter) {
+					ret = -EINVAL;
+					goto out_unlock;
+				}
 				wake_futex(this);
 				if (++op_ret >= nr_wake2)
 					break;
@@ -1095,6 +1109,7 @@
 		ret += op_ret;
 	}
 
+out_unlock:
 	double_unlock_hb(hb1, hb2);
 out_put_keys:
 	put_futex_key(&key2);
@@ -1384,9 +1399,13 @@
 		/*
 		 * FUTEX_WAIT_REQEUE_PI and FUTEX_CMP_REQUEUE_PI should always
 		 * be paired with each other and no other futex ops.
+		 *
+		 * We should never be requeueing a futex_q with a pi_state,
+		 * which is awaiting a futex_unlock_pi().
 		 */
 		if ((requeue_pi && !this->rt_waiter) ||
-		    (!requeue_pi && this->rt_waiter)) {
+		    (!requeue_pi && this->rt_waiter) ||
+		    this->pi_state) {
 			ret = -EINVAL;
 			break;
 		}
diff --git a/kernel/irq/irqdomain.c b/kernel/irq/irqdomain.c
index 4e69e24..96f3a1d 100644
--- a/kernel/irq/irqdomain.c
+++ b/kernel/irq/irqdomain.c
@@ -177,8 +177,8 @@
 			irq_base = irq_alloc_descs(first_irq, first_irq, size,
 						   of_node_to_nid(of_node));
 			if (irq_base < 0) {
-				WARN(1, "Cannot allocate irq_descs @ IRQ%d, assuming pre-allocated\n",
-				     first_irq);
+				pr_info("Cannot allocate irq_descs @ IRQ%d, assuming pre-allocated\n",
+					first_irq);
 				irq_base = first_irq;
 			}
 		} else
diff --git a/kernel/modsign_pubkey.c b/kernel/modsign_pubkey.c
index 4646eb2..767e559 100644
--- a/kernel/modsign_pubkey.c
+++ b/kernel/modsign_pubkey.c
@@ -21,10 +21,10 @@
 extern __initdata const u8 modsign_certificate_list[];
 extern __initdata const u8 modsign_certificate_list_end[];
 asm(".section .init.data,\"aw\"\n"
-    "modsign_certificate_list:\n"
+    SYMBOL_PREFIX "modsign_certificate_list:\n"
     ".incbin \"signing_key.x509\"\n"
     ".incbin \"extra_certificates\"\n"
-    "modsign_certificate_list_end:"
+    SYMBOL_PREFIX "modsign_certificate_list_end:"
     );
 
 /*
diff --git a/kernel/module_signing.c b/kernel/module_signing.c
index ea1b1df..f2970bd 100644
--- a/kernel/module_signing.c
+++ b/kernel/module_signing.c
@@ -27,13 +27,13 @@
  *	- Information block
  */
 struct module_signature {
-	enum pkey_algo		algo : 8;	/* Public-key crypto algorithm */
-	enum pkey_hash_algo	hash : 8;	/* Digest algorithm */
-	enum pkey_id_type	id_type : 8;	/* Key identifier type */
-	u8			signer_len;	/* Length of signer's name */
-	u8			key_id_len;	/* Length of key identifier */
-	u8			__pad[3];
-	__be32			sig_len;	/* Length of signature data */
+	u8	algo;		/* Public-key crypto algorithm [enum pkey_algo] */
+	u8	hash;		/* Digest algorithm [enum pkey_hash_algo] */
+	u8	id_type;	/* Key identifier type [enum pkey_id_type] */
+	u8	signer_len;	/* Length of signer's name */
+	u8	key_id_len;	/* Length of key identifier */
+	u8	__pad[3];
+	__be32	sig_len;	/* Length of signature data */
 };
 
 /*
diff --git a/kernel/power/main.c b/kernel/power/main.c
index f458238..1c16f91 100644
--- a/kernel/power/main.c
+++ b/kernel/power/main.c
@@ -59,7 +59,7 @@
 {
 	unsigned long val;
 
-	if (strict_strtoul(buf, 10, &val))
+	if (kstrtoul(buf, 10, &val))
 		return -EINVAL;
 
 	if (val > 1)
diff --git a/kernel/power/qos.c b/kernel/power/qos.c
index 846bd42..9322ff7 100644
--- a/kernel/power/qos.c
+++ b/kernel/power/qos.c
@@ -213,6 +213,69 @@
 }
 
 /**
+ * pm_qos_flags_remove_req - Remove device PM QoS flags request.
+ * @pqf: Device PM QoS flags set to remove the request from.
+ * @req: Request to remove from the set.
+ */
+static void pm_qos_flags_remove_req(struct pm_qos_flags *pqf,
+				    struct pm_qos_flags_request *req)
+{
+	s32 val = 0;
+
+	list_del(&req->node);
+	list_for_each_entry(req, &pqf->list, node)
+		val |= req->flags;
+
+	pqf->effective_flags = val;
+}
+
+/**
+ * pm_qos_update_flags - Update a set of PM QoS flags.
+ * @pqf: Set of flags to update.
+ * @req: Request to add to the set, to modify, or to remove from the set.
+ * @action: Action to take on the set.
+ * @val: Value of the request to add or modify.
+ *
+ * Update the given set of PM QoS flags and call notifiers if the aggregate
+ * value has changed.  Returns 1 if the aggregate constraint value has changed,
+ * 0 otherwise.
+ */
+bool pm_qos_update_flags(struct pm_qos_flags *pqf,
+			 struct pm_qos_flags_request *req,
+			 enum pm_qos_req_action action, s32 val)
+{
+	unsigned long irqflags;
+	s32 prev_value, curr_value;
+
+	spin_lock_irqsave(&pm_qos_lock, irqflags);
+
+	prev_value = list_empty(&pqf->list) ? 0 : pqf->effective_flags;
+
+	switch (action) {
+	case PM_QOS_REMOVE_REQ:
+		pm_qos_flags_remove_req(pqf, req);
+		break;
+	case PM_QOS_UPDATE_REQ:
+		pm_qos_flags_remove_req(pqf, req);
+	case PM_QOS_ADD_REQ:
+		req->flags = val;
+		INIT_LIST_HEAD(&req->node);
+		list_add_tail(&req->node, &pqf->list);
+		pqf->effective_flags |= val;
+		break;
+	default:
+		/* no action */
+		;
+	}
+
+	curr_value = list_empty(&pqf->list) ? 0 : pqf->effective_flags;
+
+	spin_unlock_irqrestore(&pm_qos_lock, irqflags);
+
+	return prev_value != curr_value;
+}
+
+/**
  * pm_qos_request - returns current system wide qos expectation
  * @pm_qos_class: identification of which qos value is requested
  *
@@ -500,7 +563,7 @@
 		} else {
 			ascii_value[count] = '\0';
 		}
-		ret = strict_strtoul(ascii_value, 16, &ulval);
+		ret = kstrtoul(ascii_value, 16, &ulval);
 		if (ret) {
 			pr_debug("%s, 0x%lx, 0x%x\n", ascii_value, ulval, ret);
 			return -EINVAL;
diff --git a/kernel/power/swap.c b/kernel/power/swap.c
index 3c9d764..7c33ed2 100644
--- a/kernel/power/swap.c
+++ b/kernel/power/swap.c
@@ -126,7 +126,7 @@
 
 	/* Figure out where to put the new node */
 	while (*new) {
-		ext = container_of(*new, struct swsusp_extent, node);
+		ext = rb_entry(*new, struct swsusp_extent, node);
 		parent = *new;
 		if (swap_offset < ext->start) {
 			/* Try to merge */
diff --git a/kernel/sched/auto_group.c b/kernel/sched/auto_group.c
index 0984a21..15f60d0 100644
--- a/kernel/sched/auto_group.c
+++ b/kernel/sched/auto_group.c
@@ -143,15 +143,11 @@
 
 	p->signal->autogroup = autogroup_kref_get(ag);
 
-	if (!ACCESS_ONCE(sysctl_sched_autogroup_enabled))
-		goto out;
-
 	t = p;
 	do {
 		sched_move_task(t);
 	} while_each_thread(p, t);
 
-out:
 	unlock_task_sighand(p, &flags);
 	autogroup_kref_put(prev);
 }
diff --git a/kernel/sched/auto_group.h b/kernel/sched/auto_group.h
index 8bd0471..443232e 100644
--- a/kernel/sched/auto_group.h
+++ b/kernel/sched/auto_group.h
@@ -4,11 +4,6 @@
 #include <linux/rwsem.h>
 
 struct autogroup {
-	/*
-	 * reference doesn't mean how many thread attach to this
-	 * autogroup now. It just stands for the number of task
-	 * could use this autogroup.
-	 */
 	struct kref		kref;
 	struct task_group	*tg;
 	struct rw_semaphore	lock;
diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c
index a402608..6f33706 100644
--- a/kernel/time/tick-sched.c
+++ b/kernel/time/tick-sched.c
@@ -526,6 +526,8 @@
 	if (!ts->inidle)
 		return;
 
+	/* Cancel the timer because CPU already waken up from the C-states*/
+	menu_hrtimer_cancel();
 	__tick_nohz_idle_enter(ts);
 }
 
@@ -621,6 +623,8 @@
 
 	ts->inidle = 0;
 
+	/* Cancel the timer because CPU already waken up from the C-states*/
+	menu_hrtimer_cancel();
 	if (ts->idle_active || ts->tick_stopped)
 		now = ktime_get();
 
diff --git a/kernel/watchdog.c b/kernel/watchdog.c
index 9d4c8d5..c8c21be 100644
--- a/kernel/watchdog.c
+++ b/kernel/watchdog.c
@@ -116,7 +116,7 @@
 	return cpu_clock(this_cpu) >> 30LL;  /* 2^30 ~= 10^9 */
 }
 
-static unsigned long get_sample_period(void)
+static u64 get_sample_period(void)
 {
 	/*
 	 * convert watchdog_thresh from seconds to ns
@@ -125,7 +125,7 @@
 	 * and hard thresholds) to increment before the
 	 * hardlockup detector generates a warning
 	 */
-	return get_softlockup_thresh() * (NSEC_PER_SEC / 5);
+	return get_softlockup_thresh() * ((u64)NSEC_PER_SEC / 5);
 }
 
 /* Commands for resetting the watchdog */
@@ -368,6 +368,9 @@
 {
 	struct hrtimer *hrtimer = &__raw_get_cpu_var(watchdog_hrtimer);
 
+	if (!watchdog_enabled)
+		return;
+
 	watchdog_set_prio(SCHED_NORMAL, 0);
 	hrtimer_cancel(hrtimer);
 	/* disable the perf event */
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 042d221..1dae900 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -1361,8 +1361,19 @@
 
 	WARN_ON_ONCE(timer->function != delayed_work_timer_fn ||
 		     timer->data != (unsigned long)dwork);
-	BUG_ON(timer_pending(timer));
-	BUG_ON(!list_empty(&work->entry));
+	WARN_ON_ONCE(timer_pending(timer));
+	WARN_ON_ONCE(!list_empty(&work->entry));
+
+	/*
+	 * If @delay is 0, queue @dwork->work immediately.  This is for
+	 * both optimization and correctness.  The earliest @timer can
+	 * expire is on the closest next tick and delayed_work users depend
+	 * on that there's no such delay when @delay is 0.
+	 */
+	if (!delay) {
+		__queue_work(cpu, wq, &dwork->work);
+		return;
+	}
 
 	timer_stats_timer_set_start_info(&dwork->timer);
 
@@ -1417,9 +1428,6 @@
 	bool ret = false;
 	unsigned long flags;
 
-	if (!delay)
-		return queue_work_on(cpu, wq, &dwork->work);
-
 	/* read the comment in __queue_work() */
 	local_irq_save(flags);
 
@@ -2407,8 +2415,10 @@
 repeat:
 	set_current_state(TASK_INTERRUPTIBLE);
 
-	if (kthread_should_stop())
+	if (kthread_should_stop()) {
+		__set_current_state(TASK_RUNNING);
 		return 0;
+	}
 
 	/*
 	 * See whether any cpu is asking for help.  Unbounded
diff --git a/lib/Makefile b/lib/Makefile
index 66787b9..e3723c7 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -162,7 +162,7 @@
 #
 obj-$(CONFIG_OID_REGISTRY) += oid_registry.o
 
-$(obj)/oid_registry.c: $(obj)/oid_registry_data.c
+$(obj)/oid_registry.o: $(obj)/oid_registry_data.c
 
 $(obj)/oid_registry_data.c: $(srctree)/include/linux/oid_registry.h \
 			    $(src)/build_OID_registry
diff --git a/lib/asn1_decoder.c b/lib/asn1_decoder.c
index de2c8b5..5293d24 100644
--- a/lib/asn1_decoder.c
+++ b/lib/asn1_decoder.c
@@ -91,7 +91,7 @@
 
 	/* Extract the length */
 	len = data[dp++];
-	if (len < 0x7f) {
+	if (len <= 0x7f) {
 		dp += len;
 		goto next_tag;
 	}
diff --git a/lib/mpi/longlong.h b/lib/mpi/longlong.h
index 678ce4f..095ab15 100644
--- a/lib/mpi/longlong.h
+++ b/lib/mpi/longlong.h
@@ -641,7 +641,14 @@
 	**************  MIPS  *****************
 	***************************************/
 #if defined(__mips__) && W_TYPE_SIZE == 32
-#if __GNUC__ > 2 || __GNUC_MINOR__ >= 7
+#if __GNUC__ >= 4 && __GNUC_MINOR__ >= 4
+#define umul_ppmm(w1, w0, u, v)			\
+do {						\
+	UDItype __ll = (UDItype)(u) * (v);	\
+	w1 = __ll >> 32;			\
+	w0 = __ll;				\
+} while (0)
+#elif __GNUC__ > 2 || __GNUC_MINOR__ >= 7
 #define umul_ppmm(w1, w0, u, v) \
 	__asm__ ("multu %2,%3" \
 	: "=l" ((USItype)(w0)), \
@@ -666,7 +673,15 @@
 	**************  MIPS/64  **************
 	***************************************/
 #if (defined(__mips) && __mips >= 3) && W_TYPE_SIZE == 64
-#if __GNUC__ > 2 || __GNUC_MINOR__ >= 7
+#if __GNUC__ >= 4 && __GNUC_MINOR__ >= 4
+#define umul_ppmm(w1, w0, u, v) \
+do {									\
+	typedef unsigned int __ll_UTItype __attribute__((mode(TI)));	\
+	__ll_UTItype __ll = (__ll_UTItype)(u) * (v);			\
+	w1 = __ll >> 64;						\
+	w0 = __ll;							\
+} while (0)
+#elif __GNUC__ > 2 || __GNUC_MINOR__ >= 7
 #define umul_ppmm(w1, w0, u, v) \
 	__asm__ ("dmultu %2,%3" \
 	: "=l" ((UDItype)(w0)), \
diff --git a/mm/bootmem.c b/mm/bootmem.c
index 434be4a..f468185 100644
--- a/mm/bootmem.c
+++ b/mm/bootmem.c
@@ -198,8 +198,6 @@
 			int order = ilog2(BITS_PER_LONG);
 
 			__free_pages_bootmem(pfn_to_page(start), order);
-			fixup_zone_present_pages(page_to_nid(pfn_to_page(start)),
-					start, start + BITS_PER_LONG);
 			count += BITS_PER_LONG;
 			start += BITS_PER_LONG;
 		} else {
@@ -210,9 +208,6 @@
 				if (vec & 1) {
 					page = pfn_to_page(start + off);
 					__free_pages_bootmem(page, 0);
-					fixup_zone_present_pages(
-						page_to_nid(page),
-						start + off, start + off + 1);
 					count++;
 				}
 				vec >>= 1;
@@ -226,11 +221,8 @@
 	pages = bdata->node_low_pfn - bdata->node_min_pfn;
 	pages = bootmem_bootmap_pages(pages);
 	count += pages;
-	while (pages--) {
-		fixup_zone_present_pages(page_to_nid(page),
-				page_to_pfn(page), page_to_pfn(page) + 1);
+	while (pages--)
 		__free_pages_bootmem(page++, 0);
-	}
 
 	bdebug("nid=%td released=%lx\n", bdata - bootmem_node_data, count);
 
diff --git a/mm/compaction.c b/mm/compaction.c
index 9eef558..694eaab 100644
--- a/mm/compaction.c
+++ b/mm/compaction.c
@@ -713,7 +713,15 @@
 
 		/* Found a block suitable for isolating free pages from */
 		isolated = 0;
-		end_pfn = min(pfn + pageblock_nr_pages, zone_end_pfn);
+
+		/*
+		 * As pfn may not start aligned, pfn+pageblock_nr_page
+		 * may cross a MAX_ORDER_NR_PAGES boundary and miss
+		 * a pfn_valid check. Ensure isolate_freepages_block()
+		 * only scans within a pageblock
+		 */
+		end_pfn = ALIGN(pfn + 1, pageblock_nr_pages);
+		end_pfn = min(end_pfn, zone_end_pfn);
 		isolated = isolate_freepages_block(cc, pfn, end_pfn,
 						   freelist, false);
 		nr_freepages += isolated;
diff --git a/mm/dmapool.c b/mm/dmapool.c
index c5ab33b..da1b0f0 100644
--- a/mm/dmapool.c
+++ b/mm/dmapool.c
@@ -50,7 +50,6 @@
 	size_t allocation;
 	size_t boundary;
 	char name[32];
-	wait_queue_head_t waitq;
 	struct list_head pools;
 };
 
@@ -62,8 +61,6 @@
 	unsigned int offset;
 };
 
-#define	POOL_TIMEOUT_JIFFIES	((100 /* msec */ * HZ) / 1000)
-
 static DEFINE_MUTEX(pools_lock);
 
 static ssize_t
@@ -172,7 +169,6 @@
 	retval->size = size;
 	retval->boundary = boundary;
 	retval->allocation = allocation;
-	init_waitqueue_head(&retval->waitq);
 
 	if (dev) {
 		int ret;
@@ -227,7 +223,6 @@
 		memset(page->vaddr, POOL_POISON_FREED, pool->allocation);
 #endif
 		pool_initialise_page(pool, page);
-		list_add(&page->page_list, &pool->page_list);
 		page->in_use = 0;
 		page->offset = 0;
 	} else {
@@ -315,30 +310,21 @@
 	might_sleep_if(mem_flags & __GFP_WAIT);
 
 	spin_lock_irqsave(&pool->lock, flags);
- restart:
 	list_for_each_entry(page, &pool->page_list, page_list) {
 		if (page->offset < pool->allocation)
 			goto ready;
 	}
-	page = pool_alloc_page(pool, GFP_ATOMIC);
-	if (!page) {
-		if (mem_flags & __GFP_WAIT) {
-			DECLARE_WAITQUEUE(wait, current);
 
-			__set_current_state(TASK_UNINTERRUPTIBLE);
-			__add_wait_queue(&pool->waitq, &wait);
-			spin_unlock_irqrestore(&pool->lock, flags);
+	/* pool_alloc_page() might sleep, so temporarily drop &pool->lock */
+	spin_unlock_irqrestore(&pool->lock, flags);
 
-			schedule_timeout(POOL_TIMEOUT_JIFFIES);
+	page = pool_alloc_page(pool, mem_flags);
+	if (!page)
+		return NULL;
 
-			spin_lock_irqsave(&pool->lock, flags);
-			__remove_wait_queue(&pool->waitq, &wait);
-			goto restart;
-		}
-		retval = NULL;
-		goto done;
-	}
+	spin_lock_irqsave(&pool->lock, flags);
 
+	list_add(&page->page_list, &pool->page_list);
  ready:
 	page->in_use++;
 	offset = page->offset;
@@ -348,7 +334,6 @@
 #ifdef	DMAPOOL_DEBUG
 	memset(retval, POOL_POISON_ALLOCATED, pool->size);
 #endif
- done:
 	spin_unlock_irqrestore(&pool->lock, flags);
 	return retval;
 }
@@ -435,8 +420,6 @@
 	page->in_use--;
 	*(int *)vaddr = page->offset;
 	page->offset = offset;
-	if (waitqueue_active(&pool->waitq))
-		wake_up_locked(&pool->waitq);
 	/*
 	 * Resist a temptation to do
 	 *    if (!is_page_busy(page)) pool_free_page(pool, page);
diff --git a/mm/highmem.c b/mm/highmem.c
index d517cd1..2da13a5 100644
--- a/mm/highmem.c
+++ b/mm/highmem.c
@@ -98,7 +98,7 @@
 {
 	unsigned long addr = (unsigned long)vaddr;
 
-	if (addr >= PKMAP_ADDR(0) && addr <= PKMAP_ADDR(LAST_PKMAP)) {
+	if (addr >= PKMAP_ADDR(0) && addr < PKMAP_ADDR(LAST_PKMAP)) {
 		int i = (addr - PKMAP_ADDR(0)) >> PAGE_SHIFT;
 		return pte_page(pkmap_page_table[i]);
 	}
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index 7acf43b..dd39ba0 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -1055,12 +1055,24 @@
 				      struct mem_cgroup *memcg)
 {
 	struct mem_cgroup_per_zone *mz;
+	struct lruvec *lruvec;
 
-	if (mem_cgroup_disabled())
-		return &zone->lruvec;
+	if (mem_cgroup_disabled()) {
+		lruvec = &zone->lruvec;
+		goto out;
+	}
 
 	mz = mem_cgroup_zoneinfo(memcg, zone_to_nid(zone), zone_idx(zone));
-	return &mz->lruvec;
+	lruvec = &mz->lruvec;
+out:
+	/*
+	 * Since a node can be onlined after the mem_cgroup was created,
+	 * we have to be prepared to initialize lruvec->zone here;
+	 * and if offlined then reonlined, we need to reinitialize it.
+	 */
+	if (unlikely(lruvec->zone != zone))
+		lruvec->zone = zone;
+	return lruvec;
 }
 
 /*
@@ -1087,9 +1099,12 @@
 	struct mem_cgroup_per_zone *mz;
 	struct mem_cgroup *memcg;
 	struct page_cgroup *pc;
+	struct lruvec *lruvec;
 
-	if (mem_cgroup_disabled())
-		return &zone->lruvec;
+	if (mem_cgroup_disabled()) {
+		lruvec = &zone->lruvec;
+		goto out;
+	}
 
 	pc = lookup_page_cgroup(page);
 	memcg = pc->mem_cgroup;
@@ -1107,7 +1122,16 @@
 		pc->mem_cgroup = memcg = root_mem_cgroup;
 
 	mz = page_cgroup_zoneinfo(memcg, page);
-	return &mz->lruvec;
+	lruvec = &mz->lruvec;
+out:
+	/*
+	 * Since a node can be onlined after the mem_cgroup was created,
+	 * we have to be prepared to initialize lruvec->zone here;
+	 * and if offlined then reonlined, we need to reinitialize it.
+	 */
+	if (unlikely(lruvec->zone != zone))
+		lruvec->zone = zone;
+	return lruvec;
 }
 
 /**
@@ -1452,17 +1476,26 @@
 static u64 mem_cgroup_get_limit(struct mem_cgroup *memcg)
 {
 	u64 limit;
-	u64 memsw;
 
 	limit = res_counter_read_u64(&memcg->res, RES_LIMIT);
-	limit += total_swap_pages << PAGE_SHIFT;
 
-	memsw = res_counter_read_u64(&memcg->memsw, RES_LIMIT);
 	/*
-	 * If memsw is finite and limits the amount of swap space available
-	 * to this memcg, return that limit.
+	 * Do not consider swap space if we cannot swap due to swappiness
 	 */
-	return min(limit, memsw);
+	if (mem_cgroup_swappiness(memcg)) {
+		u64 memsw;
+
+		limit += total_swap_pages << PAGE_SHIFT;
+		memsw = res_counter_read_u64(&memcg->memsw, RES_LIMIT);
+
+		/*
+		 * If memsw is finite and limits the amount of swap space
+		 * available to this memcg, return that limit.
+		 */
+		limit = min(limit, memsw);
+	}
+
+	return limit;
 }
 
 void mem_cgroup_out_of_memory(struct mem_cgroup *memcg, gfp_t gfp_mask,
@@ -3688,17 +3721,17 @@
 static bool mem_cgroup_force_empty_list(struct mem_cgroup *memcg,
 				int node, int zid, enum lru_list lru)
 {
-	struct mem_cgroup_per_zone *mz;
+	struct lruvec *lruvec;
 	unsigned long flags, loop;
 	struct list_head *list;
 	struct page *busy;
 	struct zone *zone;
 
 	zone = &NODE_DATA(node)->node_zones[zid];
-	mz = mem_cgroup_zoneinfo(memcg, node, zid);
-	list = &mz->lruvec.lists[lru];
+	lruvec = mem_cgroup_zone_lruvec(zone, memcg);
+	list = &lruvec->lists[lru];
 
-	loop = mz->lru_size[lru];
+	loop = mem_cgroup_get_lru_size(lruvec, lru);
 	/* give some margin against EBUSY etc...*/
 	loop += 256;
 	busy = NULL;
@@ -4736,7 +4769,7 @@
 
 	for (zone = 0; zone < MAX_NR_ZONES; zone++) {
 		mz = &pn->zoneinfo[zone];
-		lruvec_init(&mz->lruvec, &NODE_DATA(node)->node_zones[zone]);
+		lruvec_init(&mz->lruvec);
 		mz->usage_in_excess = 0;
 		mz->on_tree = false;
 		mz->memcg = memcg;
diff --git a/mm/memory-failure.c b/mm/memory-failure.c
index 6c5899b..8b20278 100644
--- a/mm/memory-failure.c
+++ b/mm/memory-failure.c
@@ -1476,9 +1476,17 @@
 {
 	int ret;
 	unsigned long pfn = page_to_pfn(page);
+	struct page *hpage = compound_trans_head(page);
 
 	if (PageHuge(page))
 		return soft_offline_huge_page(page, flags);
+	if (PageTransHuge(hpage)) {
+		if (PageAnon(hpage) && unlikely(split_huge_page(hpage))) {
+			pr_info("soft offline: %#lx: failed to split THP\n",
+				pfn);
+			return -EBUSY;
+		}
+	}
 
 	ret = get_any_page(page, pfn, flags);
 	if (ret < 0)
diff --git a/mm/memory.c b/mm/memory.c
index fb135ba..221fc9f 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -2527,9 +2527,8 @@
 	int ret = 0;
 	int page_mkwrite = 0;
 	struct page *dirty_page = NULL;
-	unsigned long mmun_start;	/* For mmu_notifiers */
-	unsigned long mmun_end;		/* For mmu_notifiers */
-	bool mmun_called = false;	/* For mmu_notifiers */
+	unsigned long mmun_start = 0;	/* For mmu_notifiers */
+	unsigned long mmun_end = 0;	/* For mmu_notifiers */
 
 	old_page = vm_normal_page(vma, address, orig_pte);
 	if (!old_page) {
@@ -2708,8 +2707,7 @@
 		goto oom_free_new;
 
 	mmun_start  = address & PAGE_MASK;
-	mmun_end    = (address & PAGE_MASK) + PAGE_SIZE;
-	mmun_called = true;
+	mmun_end    = mmun_start + PAGE_SIZE;
 	mmu_notifier_invalidate_range_start(mm, mmun_start, mmun_end);
 
 	/*
@@ -2778,7 +2776,7 @@
 		page_cache_release(new_page);
 unlock:
 	pte_unmap_unlock(page_table, ptl);
-	if (mmun_called)
+	if (mmun_end > mmun_start)
 		mmu_notifier_invalidate_range_end(mm, mmun_start, mmun_end);
 	if (old_page) {
 		/*
diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index 56b758a..e4eeaca 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -106,7 +106,6 @@
 void __ref put_page_bootmem(struct page *page)
 {
 	unsigned long type;
-	struct zone *zone;
 
 	type = (unsigned long) page->lru.next;
 	BUG_ON(type < MEMORY_HOTPLUG_MIN_BOOTMEM_TYPE ||
@@ -117,12 +116,6 @@
 		set_page_private(page, 0);
 		INIT_LIST_HEAD(&page->lru);
 		__free_pages_bootmem(page, 0);
-
-		zone = page_zone(page);
-		zone_span_writelock(zone);
-		zone->present_pages++;
-		zone_span_writeunlock(zone);
-		totalram_pages++;
 	}
 
 }
diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index d04a8a5..4ea600d 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -2037,28 +2037,6 @@
 	return new;
 }
 
-/*
- * If *frompol needs [has] an extra ref, copy *frompol to *tompol ,
- * eliminate the * MPOL_F_* flags that require conditional ref and
- * [NOTE!!!] drop the extra ref.  Not safe to reference *frompol directly
- * after return.  Use the returned value.
- *
- * Allows use of a mempolicy for, e.g., multiple allocations with a single
- * policy lookup, even if the policy needs/has extra ref on lookup.
- * shmem_readahead needs this.
- */
-struct mempolicy *__mpol_cond_copy(struct mempolicy *tompol,
-						struct mempolicy *frompol)
-{
-	if (!mpol_needs_cond_ref(frompol))
-		return frompol;
-
-	*tompol = *frompol;
-	tompol->flags &= ~MPOL_F_SHARED;	/* copy doesn't need unref */
-	__mpol_put(frompol);
-	return tompol;
-}
-
 /* Slow path of a mempolicy comparison */
 bool __mpol_equal(struct mempolicy *a, struct mempolicy *b)
 {
diff --git a/mm/mmap.c b/mm/mmap.c
index 2d94235..9a796c4 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -334,8 +334,10 @@
 	struct vm_area_struct *vma = mm->mmap;
 	while (vma) {
 		struct anon_vma_chain *avc;
+		vma_lock_anon_vma(vma);
 		list_for_each_entry(avc, &vma->anon_vma_chain, same_vma)
 			anon_vma_interval_tree_verify(avc);
+		vma_unlock_anon_vma(vma);
 		vma = vma->vm_next;
 		i++;
 	}
diff --git a/mm/mmzone.c b/mm/mmzone.c
index 3cef80f..4596d81 100644
--- a/mm/mmzone.c
+++ b/mm/mmzone.c
@@ -87,7 +87,7 @@
 }
 #endif /* CONFIG_ARCH_HAS_HOLES_MEMORYMODEL */
 
-void lruvec_init(struct lruvec *lruvec, struct zone *zone)
+void lruvec_init(struct lruvec *lruvec)
 {
 	enum lru_list lru;
 
@@ -95,8 +95,4 @@
 
 	for_each_lru(lru)
 		INIT_LIST_HEAD(&lruvec->lists[lru]);
-
-#ifdef CONFIG_MEMCG
-	lruvec->zone = zone;
-#endif
 }
diff --git a/mm/nobootmem.c b/mm/nobootmem.c
index 714d5d6..bd82f6b 100644
--- a/mm/nobootmem.c
+++ b/mm/nobootmem.c
@@ -116,8 +116,6 @@
 		return 0;
 
 	__free_pages_memory(start_pfn, end_pfn);
-	fixup_zone_present_pages(pfn_to_nid(start >> PAGE_SHIFT),
-			start_pfn, end_pfn);
 
 	return end_pfn - start_pfn;
 }
@@ -128,7 +126,6 @@
 	phys_addr_t start, end, size;
 	u64 i;
 
-	reset_zone_present_pages();
 	for_each_free_mem_range(i, MAX_NUMNODES, &start, &end, NULL)
 		count += __free_memory_core(start, end);
 
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 5b74de6..7e208f0 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -1405,7 +1405,7 @@
 
 	mt = get_pageblock_migratetype(page);
 	if (unlikely(mt != MIGRATE_ISOLATE))
-		__mod_zone_freepage_state(zone, -(1UL << order), mt);
+		__mod_zone_freepage_state(zone, -(1UL << alloc_order), mt);
 
 	if (alloc_order != order)
 		expand(zone, page, alloc_order, order,
@@ -1422,7 +1422,7 @@
 		}
 	}
 
-	return 1UL << order;
+	return 1UL << alloc_order;
 }
 
 /*
@@ -2416,8 +2416,9 @@
 		goto nopage;
 
 restart:
-	wake_all_kswapd(order, zonelist, high_zoneidx,
-					zone_idx(preferred_zone));
+	if (!(gfp_mask & __GFP_NO_KSWAPD))
+		wake_all_kswapd(order, zonelist, high_zoneidx,
+						zone_idx(preferred_zone));
 
 	/*
 	 * OK, we're below the kswapd watermark and have kicked background
@@ -2494,7 +2495,7 @@
 	 * system then fail the allocation instead of entering direct reclaim.
 	 */
 	if ((deferred_compaction || contended_compaction) &&
-	    (gfp_mask & (__GFP_MOVABLE|__GFP_REPEAT)) == __GFP_MOVABLE)
+						(gfp_mask & __GFP_NO_KSWAPD))
 		goto nopage;
 
 	/* Try direct reclaim and then allocating */
@@ -4505,7 +4506,7 @@
 		zone->zone_pgdat = pgdat;
 
 		zone_pcp_init(zone);
-		lruvec_init(&zone->lruvec, zone);
+		lruvec_init(&zone->lruvec);
 		if (!size)
 			continue;
 
@@ -6098,37 +6099,3 @@
 	dump_page_flags(page->flags);
 	mem_cgroup_print_bad_page(page);
 }
-
-/* reset zone->present_pages */
-void reset_zone_present_pages(void)
-{
-	struct zone *z;
-	int i, nid;
-
-	for_each_node_state(nid, N_HIGH_MEMORY) {
-		for (i = 0; i < MAX_NR_ZONES; i++) {
-			z = NODE_DATA(nid)->node_zones + i;
-			z->present_pages = 0;
-		}
-	}
-}
-
-/* calculate zone's present pages in buddy system */
-void fixup_zone_present_pages(int nid, unsigned long start_pfn,
-				unsigned long end_pfn)
-{
-	struct zone *z;
-	unsigned long zone_start_pfn, zone_end_pfn;
-	int i;
-
-	for (i = 0; i < MAX_NR_ZONES; i++) {
-		z = NODE_DATA(nid)->node_zones + i;
-		zone_start_pfn = z->zone_start_pfn;
-		zone_end_pfn = zone_start_pfn + z->spanned_pages;
-
-		/* if the two regions intersect */
-		if (!(zone_start_pfn >= end_pfn	|| zone_end_pfn <= start_pfn))
-			z->present_pages += min(end_pfn, zone_end_pfn) -
-					    max(start_pfn, zone_start_pfn);
-	}
-}
diff --git a/mm/shmem.c b/mm/shmem.c
index 67afba5..50c5b8f 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -643,7 +643,7 @@
 		kfree(info->symlink);
 
 	simple_xattrs_free(&info->xattrs);
-	BUG_ON(inode->i_blocks);
+	WARN_ON(inode->i_blocks);
 	shmem_free_inode(inode->i_sb);
 	clear_inode(inode);
 }
@@ -910,25 +910,8 @@
 static struct page *shmem_swapin(swp_entry_t swap, gfp_t gfp,
 			struct shmem_inode_info *info, pgoff_t index)
 {
-	struct mempolicy mpol, *spol;
 	struct vm_area_struct pvma;
-
-	spol = mpol_cond_copy(&mpol,
-			mpol_shared_policy_lookup(&info->policy, index));
-
-	/* Create a pseudo vma that just contains the policy */
-	pvma.vm_start = 0;
-	/* Bias interleave by inode number to distribute better across nodes */
-	pvma.vm_pgoff = index + info->vfs_inode.i_ino;
-	pvma.vm_ops = NULL;
-	pvma.vm_policy = spol;
-	return swapin_readahead(swap, gfp, &pvma, 0);
-}
-
-static struct page *shmem_alloc_page(gfp_t gfp,
-			struct shmem_inode_info *info, pgoff_t index)
-{
-	struct vm_area_struct pvma;
+	struct page *page;
 
 	/* Create a pseudo vma that just contains the policy */
 	pvma.vm_start = 0;
@@ -937,10 +920,33 @@
 	pvma.vm_ops = NULL;
 	pvma.vm_policy = mpol_shared_policy_lookup(&info->policy, index);
 
-	/*
-	 * alloc_page_vma() will drop the shared policy reference
-	 */
-	return alloc_page_vma(gfp, &pvma, 0);
+	page = swapin_readahead(swap, gfp, &pvma, 0);
+
+	/* Drop reference taken by mpol_shared_policy_lookup() */
+	mpol_cond_put(pvma.vm_policy);
+
+	return page;
+}
+
+static struct page *shmem_alloc_page(gfp_t gfp,
+			struct shmem_inode_info *info, pgoff_t index)
+{
+	struct vm_area_struct pvma;
+	struct page *page;
+
+	/* Create a pseudo vma that just contains the policy */
+	pvma.vm_start = 0;
+	/* Bias interleave by inode number to distribute better across nodes */
+	pvma.vm_pgoff = index + info->vfs_inode.i_ino;
+	pvma.vm_ops = NULL;
+	pvma.vm_policy = mpol_shared_policy_lookup(&info->policy, index);
+
+	page = alloc_page_vma(gfp, &pvma, 0);
+
+	/* Drop reference taken by mpol_shared_policy_lookup() */
+	mpol_cond_put(pvma.vm_policy);
+
+	return page;
 }
 #else /* !CONFIG_NUMA */
 #ifdef CONFIG_TMPFS
@@ -1145,8 +1151,20 @@
 		if (!error) {
 			error = shmem_add_to_page_cache(page, mapping, index,
 						gfp, swp_to_radix_entry(swap));
-			/* We already confirmed swap, and make no allocation */
-			VM_BUG_ON(error);
+			/*
+			 * We already confirmed swap under page lock, and make
+			 * no memory allocation here, so usually no possibility
+			 * of error; but free_swap_and_cache() only trylocks a
+			 * page, so it is just possible that the entry has been
+			 * truncated or holepunched since swap was confirmed.
+			 * shmem_undo_range() will have done some of the
+			 * unaccounting, now delete_from_swap_cache() will do
+			 * the rest (including mem_cgroup_uncharge_swapcache).
+			 * Reset swap.val? No, leave it so "failed" goes back to
+			 * "repeat": reading a hole and writing should succeed.
+			 */
+			if (error)
+				delete_from_swap_cache(page);
 		}
 		if (error)
 			goto failed;
diff --git a/mm/sparse.c b/mm/sparse.c
index fac95f2..a83de2f 100644
--- a/mm/sparse.c
+++ b/mm/sparse.c
@@ -617,7 +617,7 @@
 {
 	return; /* XXX: Not implemented yet */
 }
-static void free_map_bootmem(struct page *page, unsigned long nr_pages)
+static void free_map_bootmem(struct page *memmap, unsigned long nr_pages)
 {
 }
 #else
@@ -658,10 +658,11 @@
 			   get_order(sizeof(struct page) * nr_pages));
 }
 
-static void free_map_bootmem(struct page *page, unsigned long nr_pages)
+static void free_map_bootmem(struct page *memmap, unsigned long nr_pages)
 {
 	unsigned long maps_section_nr, removing_section_nr, i;
 	unsigned long magic;
+	struct page *page = virt_to_page(memmap);
 
 	for (i = 0; i < nr_pages; i++, page++) {
 		magic = (unsigned long) page->lru.next;
@@ -710,13 +711,10 @@
 	 */
 
 	if (memmap) {
-		struct page *memmap_page;
-		memmap_page = virt_to_page(memmap);
-
 		nr_pages = PAGE_ALIGN(PAGES_PER_SECTION * sizeof(struct page))
 			>> PAGE_SHIFT;
 
-		free_map_bootmem(memmap_page, nr_pages);
+		free_map_bootmem(memmap, nr_pages);
 	}
 }
 
diff --git a/mm/swapfile.c b/mm/swapfile.c
index 71cd288..f91a255 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -1494,9 +1494,8 @@
 	BUG_ON(!current->mm);
 
 	pathname = getname(specialfile);
-	err = PTR_ERR(pathname);
 	if (IS_ERR(pathname))
-		goto out;
+		return PTR_ERR(pathname);
 
 	victim = file_open_name(pathname, O_RDWR|O_LARGEFILE, 0);
 	err = PTR_ERR(victim);
@@ -1608,6 +1607,7 @@
 out_dput:
 	filp_close(victim, NULL);
 out:
+	putname(pathname);
 	return err;
 }
 
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 8b055e9..b7ed376 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -1760,28 +1760,6 @@
 	return false;
 }
 
-#ifdef CONFIG_COMPACTION
-/*
- * If compaction is deferred for sc->order then scale the number of pages
- * reclaimed based on the number of consecutive allocation failures
- */
-static unsigned long scale_for_compaction(unsigned long pages_for_compaction,
-			struct lruvec *lruvec, struct scan_control *sc)
-{
-	struct zone *zone = lruvec_zone(lruvec);
-
-	if (zone->compact_order_failed <= sc->order)
-		pages_for_compaction <<= zone->compact_defer_shift;
-	return pages_for_compaction;
-}
-#else
-static unsigned long scale_for_compaction(unsigned long pages_for_compaction,
-			struct lruvec *lruvec, struct scan_control *sc)
-{
-	return pages_for_compaction;
-}
-#endif
-
 /*
  * Reclaim/compaction is used for high-order allocation requests. It reclaims
  * order-0 pages before compacting the zone. should_continue_reclaim() returns
@@ -1829,9 +1807,6 @@
 	 * inactive lists are large enough, continue reclaiming
 	 */
 	pages_for_compaction = (2UL << sc->order);
-
-	pages_for_compaction = scale_for_compaction(pages_for_compaction,
-						    lruvec, sc);
 	inactive_lru_pages = get_lru_size(lruvec, LRU_INACTIVE_FILE);
 	if (nr_swap_pages > 0)
 		inactive_lru_pages += get_lru_size(lruvec, LRU_INACTIVE_ANON);
@@ -2232,9 +2207,12 @@
  * Throttle direct reclaimers if backing storage is backed by the network
  * and the PFMEMALLOC reserve for the preferred node is getting dangerously
  * depleted. kswapd will continue to make progress and wake the processes
- * when the low watermark is reached
+ * when the low watermark is reached.
+ *
+ * Returns true if a fatal signal was delivered during throttling. If this
+ * happens, the page allocator should not consider triggering the OOM killer.
  */
-static void throttle_direct_reclaim(gfp_t gfp_mask, struct zonelist *zonelist,
+static bool throttle_direct_reclaim(gfp_t gfp_mask, struct zonelist *zonelist,
 					nodemask_t *nodemask)
 {
 	struct zone *zone;
@@ -2249,13 +2227,20 @@
 	 * processes to block on log_wait_commit().
 	 */
 	if (current->flags & PF_KTHREAD)
-		return;
+		goto out;
+
+	/*
+	 * If a fatal signal is pending, this process should not throttle.
+	 * It should return quickly so it can exit and free its memory
+	 */
+	if (fatal_signal_pending(current))
+		goto out;
 
 	/* Check if the pfmemalloc reserves are ok */
 	first_zones_zonelist(zonelist, high_zoneidx, NULL, &zone);
 	pgdat = zone->zone_pgdat;
 	if (pfmemalloc_watermark_ok(pgdat))
-		return;
+		goto out;
 
 	/* Account for the throttling */
 	count_vm_event(PGSCAN_DIRECT_THROTTLE);
@@ -2271,12 +2256,20 @@
 	if (!(gfp_mask & __GFP_FS)) {
 		wait_event_interruptible_timeout(pgdat->pfmemalloc_wait,
 			pfmemalloc_watermark_ok(pgdat), HZ);
-		return;
+
+		goto check_pending;
 	}
 
 	/* Throttle until kswapd wakes the process */
 	wait_event_killable(zone->zone_pgdat->pfmemalloc_wait,
 		pfmemalloc_watermark_ok(pgdat));
+
+check_pending:
+	if (fatal_signal_pending(current))
+		return true;
+
+out:
+	return false;
 }
 
 unsigned long try_to_free_pages(struct zonelist *zonelist, int order,
@@ -2298,13 +2291,12 @@
 		.gfp_mask = sc.gfp_mask,
 	};
 
-	throttle_direct_reclaim(gfp_mask, zonelist, nodemask);
-
 	/*
-	 * Do not enter reclaim if fatal signal is pending. 1 is returned so
-	 * that the page allocator does not consider triggering OOM
+	 * Do not enter reclaim if fatal signal was delivered while throttled.
+	 * 1 is returned so that the page allocator does not OOM kill at this
+	 * point.
 	 */
-	if (fatal_signal_pending(current))
+	if (throttle_direct_reclaim(gfp_mask, zonelist, nodemask))
 		return 1;
 
 	trace_mm_vmscan_direct_reclaim_begin(order,
@@ -2422,6 +2414,19 @@
 	} while (memcg);
 }
 
+static bool zone_balanced(struct zone *zone, int order,
+			  unsigned long balance_gap, int classzone_idx)
+{
+	if (!zone_watermark_ok_safe(zone, order, high_wmark_pages(zone) +
+				    balance_gap, classzone_idx, 0))
+		return false;
+
+	if (COMPACTION_BUILD && order && !compaction_suitable(zone, order))
+		return false;
+
+	return true;
+}
+
 /*
  * pgdat_balanced is used when checking if a node is balanced for high-order
  * allocations. Only zones that meet watermarks and are in a zone allowed
@@ -2500,8 +2505,7 @@
 			continue;
 		}
 
-		if (!zone_watermark_ok_safe(zone, order, high_wmark_pages(zone),
-							i, 0))
+		if (!zone_balanced(zone, order, 0, i))
 			all_zones_ok = false;
 		else
 			balanced += zone->present_pages;
@@ -2610,8 +2614,7 @@
 				break;
 			}
 
-			if (!zone_watermark_ok_safe(zone, order,
-					high_wmark_pages(zone), 0, 0)) {
+			if (!zone_balanced(zone, order, 0, 0)) {
 				end_zone = i;
 				break;
 			} else {
@@ -2687,9 +2690,8 @@
 				testorder = 0;
 
 			if ((buffer_heads_over_limit && is_highmem_idx(i)) ||
-				    !zone_watermark_ok_safe(zone, testorder,
-					high_wmark_pages(zone) + balance_gap,
-					end_zone, 0)) {
+			    !zone_balanced(zone, testorder,
+					   balance_gap, end_zone)) {
 				shrink_zone(zone, &sc);
 
 				reclaim_state->reclaimed_slab = 0;
@@ -2716,8 +2718,7 @@
 				continue;
 			}
 
-			if (!zone_watermark_ok_safe(zone, testorder,
-					high_wmark_pages(zone), end_zone, 0)) {
+			if (!zone_balanced(zone, testorder, 0, end_zone)) {
 				all_zones_ok = 0;
 				/*
 				 * We are still under min water mark.  This
@@ -2822,29 +2823,10 @@
 			if (!populated_zone(zone))
 				continue;
 
-			if (zone->all_unreclaimable &&
-			    sc.priority != DEF_PRIORITY)
-				continue;
-
-			/* Would compaction fail due to lack of free memory? */
-			if (COMPACTION_BUILD &&
-			    compaction_suitable(zone, order) == COMPACT_SKIPPED)
-				goto loop_again;
-
-			/* Confirm the zone is balanced for order-0 */
-			if (!zone_watermark_ok(zone, 0,
-					high_wmark_pages(zone), 0, 0)) {
-				order = sc.order = 0;
-				goto loop_again;
-			}
-
 			/* Check if the memory needs to be defragmented. */
 			if (zone_watermark_ok(zone, order,
 				    low_wmark_pages(zone), *classzone_idx, 0))
 				zones_need_compaction = 0;
-
-			/* If balanced, clear the congested flag */
-			zone_clear_flag(zone, ZONE_CONGESTED);
 		}
 
 		if (zones_need_compaction)
diff --git a/net/batman-adv/soft-interface.c b/net/batman-adv/soft-interface.c
index b9a28d2..ce0684a 100644
--- a/net/batman-adv/soft-interface.c
+++ b/net/batman-adv/soft-interface.c
@@ -325,6 +325,12 @@
 
 	soft_iface->last_rx = jiffies;
 
+	/* Let the bridge loop avoidance check the packet. If will
+	 * not handle it, we can safely push it up.
+	 */
+	if (batadv_bla_rx(bat_priv, skb, vid, is_bcast))
+		goto out;
+
 	if (orig_node)
 		batadv_tt_add_temporary_global_entry(bat_priv, orig_node,
 						     ethhdr->h_source);
@@ -332,12 +338,6 @@
 	if (batadv_is_ap_isolated(bat_priv, ethhdr->h_source, ethhdr->h_dest))
 		goto dropped;
 
-	/* Let the bridge loop avoidance check the packet. If will
-	 * not handle it, we can safely push it up.
-	 */
-	if (batadv_bla_rx(bat_priv, skb, vid, is_bcast))
-		goto out;
-
 	netif_rx(skb);
 	goto out;
 
diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c
index 112edd3..baae715 100644
--- a/net/batman-adv/translation-table.c
+++ b/net/batman-adv/translation-table.c
@@ -769,6 +769,12 @@
 		 */
 		tt_global_entry->common.flags &= ~BATADV_TT_CLIENT_TEMP;
 
+		/* the change can carry possible "attribute" flags like the
+		 * TT_CLIENT_WIFI, therefore they have to be copied in the
+		 * client entry
+		 */
+		tt_global_entry->common.flags |= flags;
+
 		/* If there is the BATADV_TT_CLIENT_ROAM flag set, there is only
 		 * one originator left in the list and we previously received a
 		 * delete + roaming change for this originator.
@@ -1496,7 +1502,7 @@
 
 			memcpy(tt_change->addr, tt_common_entry->addr,
 			       ETH_ALEN);
-			tt_change->flags = BATADV_NO_FLAGS;
+			tt_change->flags = tt_common_entry->flags;
 
 			tt_count++;
 			tt_change++;
@@ -2450,6 +2456,13 @@
 {
 	bool ret = false;
 
+	/* if the originator is a backbone node (meaning it belongs to the same
+	 * LAN of this node) the temporary client must not be added because to
+	 * reach such destination the node must use the LAN instead of the mesh
+	 */
+	if (batadv_bla_is_backbone_gw_orig(bat_priv, orig_node->orig))
+		goto out;
+
 	if (!batadv_tt_global_add(bat_priv, orig_node, addr,
 				  BATADV_TT_CLIENT_TEMP,
 				  atomic_read(&orig_node->last_ttvn)))
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 8a0ce70..a0a2f97 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -1754,11 +1754,11 @@
 	if (hdev->dev_type != HCI_AMP)
 		set_bit(HCI_AUTO_OFF, &hdev->dev_flags);
 
-	schedule_work(&hdev->power_on);
-
 	hci_notify(hdev, HCI_DEV_REG);
 	hci_dev_hold(hdev);
 
+	schedule_work(&hdev->power_on);
+
 	return id;
 
 err_wqueue:
diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c
index aa2ea0a..91de423 100644
--- a/net/bluetooth/mgmt.c
+++ b/net/bluetooth/mgmt.c
@@ -326,7 +326,7 @@
 	struct hci_dev *d;
 	size_t rp_len;
 	u16 count;
-	int i, err;
+	int err;
 
 	BT_DBG("sock %p", sk);
 
@@ -347,9 +347,7 @@
 		return -ENOMEM;
 	}
 
-	rp->num_controllers = cpu_to_le16(count);
-
-	i = 0;
+	count = 0;
 	list_for_each_entry(d, &hci_dev_list, list) {
 		if (test_bit(HCI_SETUP, &d->dev_flags))
 			continue;
@@ -357,10 +355,13 @@
 		if (!mgmt_valid_hdev(d))
 			continue;
 
-		rp->index[i++] = cpu_to_le16(d->id);
+		rp->index[count++] = cpu_to_le16(d->id);
 		BT_DBG("Added hci%u", d->id);
 	}
 
+	rp->num_controllers = cpu_to_le16(count);
+	rp_len = sizeof(*rp) + (2 * count);
+
 	read_unlock(&hci_dev_list_lock);
 
 	err = cmd_complete(sk, MGMT_INDEX_NONE, MGMT_OP_READ_INDEX_LIST, 0, rp,
@@ -1366,6 +1367,7 @@
 			continue;
 
 		list_del(&match->list);
+		kfree(match);
 		found++;
 	}
 
diff --git a/net/bluetooth/smp.c b/net/bluetooth/smp.c
index 2ac8d50..a592337 100644
--- a/net/bluetooth/smp.c
+++ b/net/bluetooth/smp.c
@@ -267,7 +267,7 @@
 
 	clear_bit(HCI_CONN_ENCRYPT_PEND, &conn->hcon->flags);
 	mgmt_auth_failed(conn->hcon->hdev, conn->dst, hcon->type,
-			 hcon->dst_type, reason);
+			 hcon->dst_type, HCI_ERROR_AUTH_FAILURE);
 
 	cancel_delayed_work_sync(&conn->security_timer);
 
diff --git a/net/can/bcm.c b/net/can/bcm.c
index 6f74758..969b7cd 100644
--- a/net/can/bcm.c
+++ b/net/can/bcm.c
@@ -1084,6 +1084,9 @@
 		op->sk = sk;
 		op->ifindex = ifindex;
 
+		/* ifindex for timeout events w/o previous frame reception */
+		op->rx_ifindex = ifindex;
+
 		/* initialize uninitialized (kzalloc) structure */
 		hrtimer_init(&op->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
 		op->timer.function = bcm_rx_timeout_handler;
diff --git a/net/core/dev.c b/net/core/dev.c
index bda6d00..e5942bf 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -2818,8 +2818,10 @@
 		if (unlikely(tcpu != next_cpu) &&
 		    (tcpu == RPS_NO_CPU || !cpu_online(tcpu) ||
 		     ((int)(per_cpu(softnet_data, tcpu).input_queue_head -
-		      rflow->last_qtail)) >= 0))
+		      rflow->last_qtail)) >= 0)) {
+			tcpu = next_cpu;
 			rflow = set_rps_cpu(dev, skb, rflow, next_cpu);
+		}
 
 		if (tcpu != RPS_NO_CPU && cpu_online(tcpu)) {
 			*rflowp = rflow;
@@ -3449,6 +3451,8 @@
 	struct list_head *head = &ptype_base[ntohs(type) & PTYPE_HASH_MASK];
 	int err = -ENOENT;
 
+	BUILD_BUG_ON(sizeof(struct napi_gro_cb) > sizeof(skb->cb));
+
 	if (NAPI_GRO_CB(skb)->count == 1) {
 		skb_shinfo(skb)->gso_size = 0;
 		goto out;
diff --git a/net/core/dev_addr_lists.c b/net/core/dev_addr_lists.c
index 87cc17d..b079c7b 100644
--- a/net/core/dev_addr_lists.c
+++ b/net/core/dev_addr_lists.c
@@ -319,7 +319,8 @@
 	 */
 	ha = list_first_entry(&dev->dev_addrs.list,
 			      struct netdev_hw_addr, list);
-	if (ha->addr == dev->dev_addr && ha->refcount == 1)
+	if (!memcmp(ha->addr, addr, dev->addr_len) &&
+	    ha->type == addr_type && ha->refcount == 1)
 		return -ENOENT;
 
 	err = __hw_addr_del(&dev->dev_addrs, addr, dev->addr_len,
diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c
index bcf02f6..017a8ba 100644
--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
@@ -429,6 +429,17 @@
 	.name  = "statistics",
 	.attrs  = netstat_attrs,
 };
+
+#if IS_ENABLED(CONFIG_WIRELESS_EXT) || IS_ENABLED(CONFIG_CFG80211)
+static struct attribute *wireless_attrs[] = {
+	NULL
+};
+
+static struct attribute_group wireless_group = {
+	.name = "wireless",
+	.attrs = wireless_attrs,
+};
+#endif
 #endif /* CONFIG_SYSFS */
 
 #ifdef CONFIG_RPS
@@ -1409,6 +1420,15 @@
 		groups++;
 
 	*groups++ = &netstat_group;
+
+#if IS_ENABLED(CONFIG_WIRELESS_EXT) || IS_ENABLED(CONFIG_CFG80211)
+	if (net->ieee80211_ptr)
+		*groups++ = &wireless_group;
+#if IS_ENABLED(CONFIG_WIRELESS_EXT)
+	else if (net->wireless_handlers)
+		*groups++ = &wireless_group;
+#endif
+#endif
 #endif /* CONFIG_SYSFS */
 
 	error = device_add(dev);
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index 4007c14..3f0636c 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -3004,7 +3004,7 @@
 	skb_shinfo(nskb)->gso_size = pinfo->gso_size;
 	pinfo->gso_size = 0;
 	skb_header_release(p);
-	nskb->prev = p;
+	NAPI_GRO_CB(nskb)->last = p;
 
 	nskb->data_len += p->len;
 	nskb->truesize += p->truesize;
@@ -3030,8 +3030,8 @@
 
 	__skb_pull(skb, offset);
 
-	p->prev->next = skb;
-	p->prev = skb;
+	NAPI_GRO_CB(p)->last->next = skb;
+	NAPI_GRO_CB(p)->last = skb;
 	skb_header_release(skb);
 
 done:
diff --git a/net/ipv4/icmp.c b/net/ipv4/icmp.c
index f2eccd5..17ff9fd 100644
--- a/net/ipv4/icmp.c
+++ b/net/ipv4/icmp.c
@@ -257,7 +257,8 @@
 		struct inet_peer *peer = inet_getpeer_v4(net->ipv4.peers, fl4->daddr, 1);
 		rc = inet_peer_xrlim_allow(peer,
 					   net->ipv4.sysctl_icmp_ratelimit);
-		inet_putpeer(peer);
+		if (peer)
+			inet_putpeer(peer);
 	}
 out:
 	return rc;
diff --git a/net/ipv4/inet_diag.c b/net/ipv4/inet_diag.c
index 0c34bfa..e23e16d 100644
--- a/net/ipv4/inet_diag.c
+++ b/net/ipv4/inet_diag.c
@@ -44,6 +44,10 @@
 	u16 dport;
 	u16 family;
 	u16 userlocks;
+#if IS_ENABLED(CONFIG_IPV6)
+	struct in6_addr saddr_storage;	/* for IPv4-mapped-IPv6 addresses */
+	struct in6_addr daddr_storage;	/* for IPv4-mapped-IPv6 addresses */
+#endif
 };
 
 static DEFINE_MUTEX(inet_diag_table_mutex);
@@ -428,25 +432,31 @@
 				break;
 			}
 
-			if (cond->prefix_len == 0)
-				break;
-
 			if (op->code == INET_DIAG_BC_S_COND)
 				addr = entry->saddr;
 			else
 				addr = entry->daddr;
 
+			if (cond->family != AF_UNSPEC &&
+			    cond->family != entry->family) {
+				if (entry->family == AF_INET6 &&
+				    cond->family == AF_INET) {
+					if (addr[0] == 0 && addr[1] == 0 &&
+					    addr[2] == htonl(0xffff) &&
+					    bitstring_match(addr + 3,
+							    cond->addr,
+							    cond->prefix_len))
+						break;
+				}
+				yes = 0;
+				break;
+			}
+
+			if (cond->prefix_len == 0)
+				break;
 			if (bitstring_match(addr, cond->addr,
 					    cond->prefix_len))
 				break;
-			if (entry->family == AF_INET6 &&
-			    cond->family == AF_INET) {
-				if (addr[0] == 0 && addr[1] == 0 &&
-				    addr[2] == htonl(0xffff) &&
-				    bitstring_match(addr + 3, cond->addr,
-						    cond->prefix_len))
-					break;
-			}
 			yes = 0;
 			break;
 		}
@@ -509,6 +519,55 @@
 	return 0;
 }
 
+/* Validate an inet_diag_hostcond. */
+static bool valid_hostcond(const struct inet_diag_bc_op *op, int len,
+			   int *min_len)
+{
+	int addr_len;
+	struct inet_diag_hostcond *cond;
+
+	/* Check hostcond space. */
+	*min_len += sizeof(struct inet_diag_hostcond);
+	if (len < *min_len)
+		return false;
+	cond = (struct inet_diag_hostcond *)(op + 1);
+
+	/* Check address family and address length. */
+	switch (cond->family) {
+	case AF_UNSPEC:
+		addr_len = 0;
+		break;
+	case AF_INET:
+		addr_len = sizeof(struct in_addr);
+		break;
+	case AF_INET6:
+		addr_len = sizeof(struct in6_addr);
+		break;
+	default:
+		return false;
+	}
+	*min_len += addr_len;
+	if (len < *min_len)
+		return false;
+
+	/* Check prefix length (in bits) vs address length (in bytes). */
+	if (cond->prefix_len > 8 * addr_len)
+		return false;
+
+	return true;
+}
+
+/* Validate a port comparison operator. */
+static inline bool valid_port_comparison(const struct inet_diag_bc_op *op,
+					 int len, int *min_len)
+{
+	/* Port comparisons put the port in a follow-on inet_diag_bc_op. */
+	*min_len += sizeof(struct inet_diag_bc_op);
+	if (len < *min_len)
+		return false;
+	return true;
+}
+
 static int inet_diag_bc_audit(const void *bytecode, int bytecode_len)
 {
 	const void *bc = bytecode;
@@ -516,29 +575,39 @@
 
 	while (len > 0) {
 		const struct inet_diag_bc_op *op = bc;
+		int min_len = sizeof(struct inet_diag_bc_op);
 
 //printk("BC: %d %d %d {%d} / %d\n", op->code, op->yes, op->no, op[1].no, len);
 		switch (op->code) {
-		case INET_DIAG_BC_AUTO:
 		case INET_DIAG_BC_S_COND:
 		case INET_DIAG_BC_D_COND:
+			if (!valid_hostcond(bc, len, &min_len))
+				return -EINVAL;
+			break;
 		case INET_DIAG_BC_S_GE:
 		case INET_DIAG_BC_S_LE:
 		case INET_DIAG_BC_D_GE:
 		case INET_DIAG_BC_D_LE:
-		case INET_DIAG_BC_JMP:
-			if (op->no < 4 || op->no > len + 4 || op->no & 3)
-				return -EINVAL;
-			if (op->no < len &&
-			    !valid_cc(bytecode, bytecode_len, len - op->no))
+			if (!valid_port_comparison(bc, len, &min_len))
 				return -EINVAL;
 			break;
+		case INET_DIAG_BC_AUTO:
+		case INET_DIAG_BC_JMP:
 		case INET_DIAG_BC_NOP:
 			break;
 		default:
 			return -EINVAL;
 		}
-		if (op->yes < 4 || op->yes > len + 4 || op->yes & 3)
+
+		if (op->code != INET_DIAG_BC_NOP) {
+			if (op->no < min_len || op->no > len + 4 || op->no & 3)
+				return -EINVAL;
+			if (op->no < len &&
+			    !valid_cc(bytecode, bytecode_len, len - op->no))
+				return -EINVAL;
+		}
+
+		if (op->yes < min_len || op->yes > len + 4 || op->yes & 3)
 			return -EINVAL;
 		bc  += op->yes;
 		len -= op->yes;
@@ -596,6 +665,36 @@
 				   cb->nlh->nlmsg_seq, NLM_F_MULTI, cb->nlh);
 }
 
+/* Get the IPv4, IPv6, or IPv4-mapped-IPv6 local and remote addresses
+ * from a request_sock. For IPv4-mapped-IPv6 we must map IPv4 to IPv6.
+ */
+static inline void inet_diag_req_addrs(const struct sock *sk,
+				       const struct request_sock *req,
+				       struct inet_diag_entry *entry)
+{
+	struct inet_request_sock *ireq = inet_rsk(req);
+
+#if IS_ENABLED(CONFIG_IPV6)
+	if (sk->sk_family == AF_INET6) {
+		if (req->rsk_ops->family == AF_INET6) {
+			entry->saddr = inet6_rsk(req)->loc_addr.s6_addr32;
+			entry->daddr = inet6_rsk(req)->rmt_addr.s6_addr32;
+		} else if (req->rsk_ops->family == AF_INET) {
+			ipv6_addr_set_v4mapped(ireq->loc_addr,
+					       &entry->saddr_storage);
+			ipv6_addr_set_v4mapped(ireq->rmt_addr,
+					       &entry->daddr_storage);
+			entry->saddr = entry->saddr_storage.s6_addr32;
+			entry->daddr = entry->daddr_storage.s6_addr32;
+		}
+	} else
+#endif
+	{
+		entry->saddr = &ireq->loc_addr;
+		entry->daddr = &ireq->rmt_addr;
+	}
+}
+
 static int inet_diag_fill_req(struct sk_buff *skb, struct sock *sk,
 			      struct request_sock *req,
 			      struct user_namespace *user_ns,
@@ -637,8 +736,10 @@
 	r->idiag_inode = 0;
 #if IS_ENABLED(CONFIG_IPV6)
 	if (r->idiag_family == AF_INET6) {
-		*(struct in6_addr *)r->id.idiag_src = inet6_rsk(req)->loc_addr;
-		*(struct in6_addr *)r->id.idiag_dst = inet6_rsk(req)->rmt_addr;
+		struct inet_diag_entry entry;
+		inet_diag_req_addrs(sk, req, &entry);
+		memcpy(r->id.idiag_src, entry.saddr, sizeof(struct in6_addr));
+		memcpy(r->id.idiag_dst, entry.daddr, sizeof(struct in6_addr));
 	}
 #endif
 
@@ -691,18 +792,7 @@
 				continue;
 
 			if (bc) {
-				entry.saddr =
-#if IS_ENABLED(CONFIG_IPV6)
-					(entry.family == AF_INET6) ?
-					inet6_rsk(req)->loc_addr.s6_addr32 :
-#endif
-					&ireq->loc_addr;
-				entry.daddr =
-#if IS_ENABLED(CONFIG_IPV6)
-					(entry.family == AF_INET6) ?
-					inet6_rsk(req)->rmt_addr.s6_addr32 :
-#endif
-					&ireq->rmt_addr;
+				inet_diag_req_addrs(sk, req, &entry);
 				entry.dport = ntohs(ireq->rmt_port);
 
 				if (!inet_diag_bc_run(bc, &entry))
diff --git a/net/ipv4/ip_fragment.c b/net/ipv4/ip_fragment.c
index 448e685..8d5cc75 100644
--- a/net/ipv4/ip_fragment.c
+++ b/net/ipv4/ip_fragment.c
@@ -707,28 +707,27 @@
 
 struct sk_buff *ip_check_defrag(struct sk_buff *skb, u32 user)
 {
-	const struct iphdr *iph;
+	struct iphdr iph;
 	u32 len;
 
 	if (skb->protocol != htons(ETH_P_IP))
 		return skb;
 
-	if (!pskb_may_pull(skb, sizeof(struct iphdr)))
+	if (!skb_copy_bits(skb, 0, &iph, sizeof(iph)))
 		return skb;
 
-	iph = ip_hdr(skb);
-	if (iph->ihl < 5 || iph->version != 4)
-		return skb;
-	if (!pskb_may_pull(skb, iph->ihl*4))
-		return skb;
-	iph = ip_hdr(skb);
-	len = ntohs(iph->tot_len);
-	if (skb->len < len || len < (iph->ihl * 4))
+	if (iph.ihl < 5 || iph.version != 4)
 		return skb;
 
-	if (ip_is_fragment(ip_hdr(skb))) {
+	len = ntohs(iph.tot_len);
+	if (skb->len < len || len < (iph.ihl * 4))
+		return skb;
+
+	if (ip_is_fragment(&iph)) {
 		skb = skb_share_check(skb, GFP_ATOMIC);
 		if (skb) {
+			if (!pskb_may_pull(skb, iph.ihl*4))
+				return skb;
 			if (pskb_trim_rcsum(skb, len))
 				return skb;
 			memset(IPCB(skb), 0, sizeof(struct inet_skb_parm));
diff --git a/net/ipv4/ip_sockglue.c b/net/ipv4/ip_sockglue.c
index 5eea4a8..14bbfcf 100644
--- a/net/ipv4/ip_sockglue.c
+++ b/net/ipv4/ip_sockglue.c
@@ -457,19 +457,28 @@
 	struct inet_sock *inet = inet_sk(sk);
 	int val = 0, err;
 
-	if (((1<<optname) & ((1<<IP_PKTINFO) | (1<<IP_RECVTTL) |
-			     (1<<IP_RECVOPTS) | (1<<IP_RECVTOS) |
-			     (1<<IP_RETOPTS) | (1<<IP_TOS) |
-			     (1<<IP_TTL) | (1<<IP_HDRINCL) |
-			     (1<<IP_MTU_DISCOVER) | (1<<IP_RECVERR) |
-			     (1<<IP_ROUTER_ALERT) | (1<<IP_FREEBIND) |
-			     (1<<IP_PASSSEC) | (1<<IP_TRANSPARENT) |
-			     (1<<IP_MINTTL) | (1<<IP_NODEFRAG))) ||
-	    optname == IP_UNICAST_IF ||
-	    optname == IP_MULTICAST_TTL ||
-	    optname == IP_MULTICAST_ALL ||
-	    optname == IP_MULTICAST_LOOP ||
-	    optname == IP_RECVORIGDSTADDR) {
+	switch (optname) {
+	case IP_PKTINFO:
+	case IP_RECVTTL:
+	case IP_RECVOPTS:
+	case IP_RECVTOS:
+	case IP_RETOPTS:
+	case IP_TOS:
+	case IP_TTL:
+	case IP_HDRINCL:
+	case IP_MTU_DISCOVER:
+	case IP_RECVERR:
+	case IP_ROUTER_ALERT:
+	case IP_FREEBIND:
+	case IP_PASSSEC:
+	case IP_TRANSPARENT:
+	case IP_MINTTL:
+	case IP_NODEFRAG:
+	case IP_UNICAST_IF:
+	case IP_MULTICAST_TTL:
+	case IP_MULTICAST_ALL:
+	case IP_MULTICAST_LOOP:
+	case IP_RECVORIGDSTADDR:
 		if (optlen >= sizeof(int)) {
 			if (get_user(val, (int __user *) optval))
 				return -EFAULT;
diff --git a/net/ipv4/ip_vti.c b/net/ipv4/ip_vti.c
index 1831092..858fddf 100644
--- a/net/ipv4/ip_vti.c
+++ b/net/ipv4/ip_vti.c
@@ -338,12 +338,17 @@
 	if (tunnel != NULL) {
 		struct pcpu_tstats *tstats;
 
+		if (!xfrm4_policy_check(NULL, XFRM_POLICY_IN, skb))
+			return -1;
+
 		tstats = this_cpu_ptr(tunnel->dev->tstats);
 		u64_stats_update_begin(&tstats->syncp);
 		tstats->rx_packets++;
 		tstats->rx_bytes += skb->len;
 		u64_stats_update_end(&tstats->syncp);
 
+		skb->mark = 0;
+		secpath_reset(skb);
 		skb->dev = tunnel->dev;
 		return 1;
 	}
diff --git a/net/ipv4/ipmr.c b/net/ipv4/ipmr.c
index 6168c4d..3eab2b2 100644
--- a/net/ipv4/ipmr.c
+++ b/net/ipv4/ipmr.c
@@ -1318,6 +1318,10 @@
 		if (get_user(v, (u32 __user *)optval))
 			return -EFAULT;
 
+		/* "pimreg%u" should not exceed 16 bytes (IFNAMSIZ) */
+		if (v != RT_TABLE_DEFAULT && v >= 1000000000)
+			return -EINVAL;
+
 		rtnl_lock();
 		ret = 0;
 		if (sk == rtnl_dereference(mrt->mroute_sk)) {
diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index a8c65121..df25142 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -1785,6 +1785,7 @@
 	if (dev_out->flags & IFF_LOOPBACK)
 		flags |= RTCF_LOCAL;
 
+	do_cache = true;
 	if (type == RTN_BROADCAST) {
 		flags |= RTCF_BROADCAST | RTCF_LOCAL;
 		fi = NULL;
@@ -1793,6 +1794,8 @@
 		if (!ip_check_mc_rcu(in_dev, fl4->daddr, fl4->saddr,
 				     fl4->flowi4_proto))
 			flags &= ~RTCF_LOCAL;
+		else
+			do_cache = false;
 		/* If multicast route do not exist use
 		 * default one, but do not gateway in this case.
 		 * Yes, it is hack.
@@ -1802,8 +1805,8 @@
 	}
 
 	fnhe = NULL;
-	do_cache = fi != NULL;
-	if (fi) {
+	do_cache &= fi != NULL;
+	if (do_cache) {
 		struct rtable __rcu **prth;
 		struct fib_nh *nh = &FIB_RES_NH(*res);
 
@@ -2597,7 +2600,7 @@
 		pr_err("Unable to create route proc files\n");
 #ifdef CONFIG_XFRM
 	xfrm_init();
-	xfrm4_init(ip_rt_max_size);
+	xfrm4_init();
 #endif
 	rtnl_register(PF_INET, RTM_GETROUTE, inet_rtm_getroute, NULL, NULL);
 
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index 197c000..e457c7a 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -830,8 +830,8 @@
 	return mss_now;
 }
 
-static ssize_t do_tcp_sendpages(struct sock *sk, struct page **pages, int poffset,
-			 size_t psize, int flags)
+static ssize_t do_tcp_sendpages(struct sock *sk, struct page *page, int offset,
+				size_t size, int flags)
 {
 	struct tcp_sock *tp = tcp_sk(sk);
 	int mss_now, size_goal;
@@ -858,12 +858,9 @@
 	if (sk->sk_err || (sk->sk_shutdown & SEND_SHUTDOWN))
 		goto out_err;
 
-	while (psize > 0) {
+	while (size > 0) {
 		struct sk_buff *skb = tcp_write_queue_tail(sk);
-		struct page *page = pages[poffset / PAGE_SIZE];
 		int copy, i;
-		int offset = poffset % PAGE_SIZE;
-		int size = min_t(size_t, psize, PAGE_SIZE - offset);
 		bool can_coalesce;
 
 		if (!tcp_send_head(sk) || (copy = size_goal - skb->len) <= 0) {
@@ -912,8 +909,8 @@
 			TCP_SKB_CB(skb)->tcp_flags &= ~TCPHDR_PSH;
 
 		copied += copy;
-		poffset += copy;
-		if (!(psize -= copy))
+		offset += copy;
+		if (!(size -= copy))
 			goto out;
 
 		if (skb->len < size_goal || (flags & MSG_OOB))
@@ -960,7 +957,7 @@
 					flags);
 
 	lock_sock(sk);
-	res = do_tcp_sendpages(sk, &page, offset, size, flags);
+	res = do_tcp_sendpages(sk, page, offset, size, flags);
 	release_sock(sk);
 	return res;
 }
@@ -1212,7 +1209,7 @@
 wait_for_sndbuf:
 			set_bit(SOCK_NOSPACE, &sk->sk_socket->flags);
 wait_for_memory:
-			if (copied && likely(!tp->repair))
+			if (copied)
 				tcp_push(sk, flags & ~MSG_MORE, mss_now, TCP_NAGLE_PUSH);
 
 			if ((err = sk_stream_wait_memory(sk, &timeo)) != 0)
@@ -1223,7 +1220,7 @@
 	}
 
 out:
-	if (copied && likely(!tp->repair))
+	if (copied)
 		tcp_push(sk, flags, mss_now, tp->nonagle);
 	release_sock(sk);
 	return copied + copied_syn;
diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index 2c2b13a..181fc82 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -5313,11 +5313,6 @@
 		goto discard;
 	}
 
-	/* ts_recent update must be made after we are sure that the packet
-	 * is in window.
-	 */
-	tcp_replace_ts_recent(tp, TCP_SKB_CB(skb)->seq);
-
 	/* step 3: check security and precedence [ignored] */
 
 	/* step 4: Check for a SYN
@@ -5552,6 +5547,11 @@
 	if (th->ack && tcp_ack(sk, skb, FLAG_SLOWPATH) < 0)
 		goto discard;
 
+	/* ts_recent update must be made after we are sure that the packet
+	 * is in window.
+	 */
+	tcp_replace_ts_recent(tp, TCP_SKB_CB(skb)->seq);
+
 	tcp_rcv_rtt_measure_ts(sk, skb);
 
 	/* Process urgent data. */
@@ -5645,7 +5645,11 @@
 	tcp_fastopen_cache_set(sk, mss, cookie, syn_drop);
 
 	if (data) { /* Retransmit unacked data in SYN */
-		tcp_retransmit_skb(sk, data);
+		tcp_for_write_queue_from(data, sk) {
+			if (data == tcp_send_head(sk) ||
+			    __tcp_retransmit_skb(sk, data))
+				break;
+		}
 		tcp_rearm_rto(sk);
 		return true;
 	}
@@ -6130,6 +6134,11 @@
 	} else
 		goto discard;
 
+	/* ts_recent update must be made after we are sure that the packet
+	 * is in window.
+	 */
+	tcp_replace_ts_recent(tp, TCP_SKB_CB(skb)->seq);
+
 	/* step 6: check the URG bit */
 	tcp_urg(sk, skb, th);
 
diff --git a/net/ipv4/tcp_metrics.c b/net/ipv4/tcp_metrics.c
index 53bc584..f696d7c 100644
--- a/net/ipv4/tcp_metrics.c
+++ b/net/ipv4/tcp_metrics.c
@@ -1,7 +1,6 @@
 #include <linux/rcupdate.h>
 #include <linux/spinlock.h>
 #include <linux/jiffies.h>
-#include <linux/bootmem.h>
 #include <linux/module.h>
 #include <linux/cache.h>
 #include <linux/slab.h>
@@ -9,6 +8,7 @@
 #include <linux/tcp.h>
 #include <linux/hash.h>
 #include <linux/tcp_metrics.h>
+#include <linux/vmalloc.h>
 
 #include <net/inet_connection_sock.h>
 #include <net/net_namespace.h>
@@ -1034,7 +1034,10 @@
 	net->ipv4.tcp_metrics_hash_log = order_base_2(slots);
 	size = sizeof(struct tcpm_hash_bucket) << net->ipv4.tcp_metrics_hash_log;
 
-	net->ipv4.tcp_metrics_hash = kzalloc(size, GFP_KERNEL);
+	net->ipv4.tcp_metrics_hash = kzalloc(size, GFP_KERNEL | __GFP_NOWARN);
+	if (!net->ipv4.tcp_metrics_hash)
+		net->ipv4.tcp_metrics_hash = vzalloc(size);
+
 	if (!net->ipv4.tcp_metrics_hash)
 		return -ENOMEM;
 
@@ -1055,7 +1058,10 @@
 			tm = next;
 		}
 	}
-	kfree(net->ipv4.tcp_metrics_hash);
+	if (is_vmalloc_addr(net->ipv4.tcp_metrics_hash))
+		vfree(net->ipv4.tcp_metrics_hash);
+	else
+		kfree(net->ipv4.tcp_metrics_hash);
 }
 
 static __net_initdata struct pernet_operations tcp_net_metrics_ops = {
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index cfe6ffe..948ac27 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -1986,6 +1986,9 @@
 		tso_segs = tcp_init_tso_segs(sk, skb, mss_now);
 		BUG_ON(!tso_segs);
 
+		if (unlikely(tp->repair) && tp->repair_queue == TCP_SEND_QUEUE)
+			goto repair; /* Skip network transmission */
+
 		cwnd_quota = tcp_cwnd_test(tp, skb);
 		if (!cwnd_quota)
 			break;
@@ -2026,6 +2029,7 @@
 		if (unlikely(tcp_transmit_skb(sk, skb, 1, gfp)))
 			break;
 
+repair:
 		/* Advance the send_head.  This one is sent out.
 		 * This call will increment packets_out.
 		 */
@@ -2305,12 +2309,11 @@
  * state updates are done by the caller.  Returns non-zero if an
  * error occurred which prevented the send.
  */
-int tcp_retransmit_skb(struct sock *sk, struct sk_buff *skb)
+int __tcp_retransmit_skb(struct sock *sk, struct sk_buff *skb)
 {
 	struct tcp_sock *tp = tcp_sk(sk);
 	struct inet_connection_sock *icsk = inet_csk(sk);
 	unsigned int cur_mss;
-	int err;
 
 	/* Inconslusive MTU probe */
 	if (icsk->icsk_mtup.probe_size) {
@@ -2383,11 +2386,17 @@
 	if (unlikely(NET_IP_ALIGN && ((unsigned long)skb->data & 3))) {
 		struct sk_buff *nskb = __pskb_copy(skb, MAX_TCP_HEADER,
 						   GFP_ATOMIC);
-		err = nskb ? tcp_transmit_skb(sk, nskb, 0, GFP_ATOMIC) :
-			     -ENOBUFS;
+		return nskb ? tcp_transmit_skb(sk, nskb, 0, GFP_ATOMIC) :
+			      -ENOBUFS;
 	} else {
-		err = tcp_transmit_skb(sk, skb, 1, GFP_ATOMIC);
+		return tcp_transmit_skb(sk, skb, 1, GFP_ATOMIC);
 	}
+}
+
+int tcp_retransmit_skb(struct sock *sk, struct sk_buff *skb)
+{
+	struct tcp_sock *tp = tcp_sk(sk);
+	int err = __tcp_retransmit_skb(sk, skb);
 
 	if (err == 0) {
 		/* Update global TCP statistics. */
diff --git a/net/ipv4/xfrm4_policy.c b/net/ipv4/xfrm4_policy.c
index 05c5ab8..3be0ac2 100644
--- a/net/ipv4/xfrm4_policy.c
+++ b/net/ipv4/xfrm4_policy.c
@@ -279,19 +279,8 @@
 	xfrm_policy_unregister_afinfo(&xfrm4_policy_afinfo);
 }
 
-void __init xfrm4_init(int rt_max_size)
+void __init xfrm4_init(void)
 {
-	/*
-	 * Select a default value for the gc_thresh based on the main route
-	 * table hash size.  It seems to me the worst case scenario is when
-	 * we have ipsec operating in transport mode, in which we create a
-	 * dst_entry per socket.  The xfrm gc algorithm starts trying to remove
-	 * entries at gc_thresh, and prevents new allocations as 2*gc_thresh
-	 * so lets set an initial xfrm gc_thresh value at the rt_max_size/2.
-	 * That will let us store an ipsec connection per route table entry,
-	 * and start cleaning when were 1/2 full
-	 */
-	xfrm4_dst_ops.gc_thresh = rt_max_size/2;
 	dst_entries_init(&xfrm4_dst_ops);
 
 	xfrm4_state_init();
diff --git a/net/ipv6/inet6_connection_sock.c b/net/ipv6/inet6_connection_sock.c
index c4f9341..3064785 100644
--- a/net/ipv6/inet6_connection_sock.c
+++ b/net/ipv6/inet6_connection_sock.c
@@ -252,6 +252,7 @@
 		return NULL;
 	dst->ops->update_pmtu(dst, sk, NULL, mtu);
 
-	return inet6_csk_route_socket(sk, &fl6);
+	dst = inet6_csk_route_socket(sk, &fl6);
+	return IS_ERR(dst) ? NULL : dst;
 }
 EXPORT_SYMBOL_GPL(inet6_csk_update_pmtu);
diff --git a/net/ipv6/ipv6_sockglue.c b/net/ipv6/ipv6_sockglue.c
index ba6d13d..e02faed 100644
--- a/net/ipv6/ipv6_sockglue.c
+++ b/net/ipv6/ipv6_sockglue.c
@@ -827,6 +827,7 @@
 		if (val < 0 || val > 255)
 			goto e_inval;
 		np->min_hopcount = val;
+		retv = 0;
 		break;
 	case IPV6_DONTFRAG:
 		np->dontfrag = valbool;
diff --git a/net/irda/irttp.c b/net/irda/irttp.c
index 1002e33..ae43c62 100644
--- a/net/irda/irttp.c
+++ b/net/irda/irttp.c
@@ -441,6 +441,7 @@
 	lsap = irlmp_open_lsap(stsap_sel, &ttp_notify, 0);
 	if (lsap == NULL) {
 		IRDA_DEBUG(0, "%s: unable to allocate LSAP!!\n", __func__);
+		__irttp_close_tsap(self);
 		return NULL;
 	}
 
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 05f3a31..7371f67 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -2594,6 +2594,9 @@
 		else
 			local->probe_req_reg--;
 
+		if (!local->open_count)
+			break;
+
 		ieee80211_queue_work(&local->hw, &local->reconfig_filter);
 		break;
 	default:
diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c
index bf87c70..c21e33d 100644
--- a/net/mac80211/ibss.c
+++ b/net/mac80211/ibss.c
@@ -1151,10 +1151,6 @@
 
 	mutex_lock(&sdata->u.ibss.mtx);
 
-	sdata->u.ibss.state = IEEE80211_IBSS_MLME_SEARCH;
-	memset(sdata->u.ibss.bssid, 0, ETH_ALEN);
-	sdata->u.ibss.ssid_len = 0;
-
 	active_ibss = ieee80211_sta_active_ibss(sdata);
 
 	if (!active_ibss && !is_zero_ether_addr(ifibss->bssid)) {
@@ -1175,6 +1171,10 @@
 		}
 	}
 
+	ifibss->state = IEEE80211_IBSS_MLME_SEARCH;
+	memset(ifibss->bssid, 0, ETH_ALEN);
+	ifibss->ssid_len = 0;
+
 	sta_info_flush(sdata->local, sdata);
 
 	spin_lock_bh(&ifibss->incomplete_lock);
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 8c80455..156e583 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -1314,6 +1314,8 @@
 					 struct net_device *dev);
 netdev_tx_t ieee80211_subif_start_xmit(struct sk_buff *skb,
 				       struct net_device *dev);
+void ieee80211_purge_tx_queue(struct ieee80211_hw *hw,
+			      struct sk_buff_head *skbs);
 
 /* HT */
 void ieee80211_apply_htcap_overrides(struct ieee80211_sub_if_data *sdata,
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index c80c449..f57f597 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -871,8 +871,10 @@
 				local->hw.wiphy->cipher_suites,
 				sizeof(u32) * local->hw.wiphy->n_cipher_suites,
 				GFP_KERNEL);
-			if (!suites)
-				return -ENOMEM;
+			if (!suites) {
+				result = -ENOMEM;
+				goto fail_wiphy_register;
+			}
 			for (r = 0; r < local->hw.wiphy->n_cipher_suites; r++) {
 				u32 suite = local->hw.wiphy->cipher_suites[r];
 				if (suite == WLAN_CIPHER_SUITE_WEP40 ||
diff --git a/net/mac80211/offchannel.c b/net/mac80211/offchannel.c
index 83608ac..2c84185 100644
--- a/net/mac80211/offchannel.c
+++ b/net/mac80211/offchannel.c
@@ -458,8 +458,6 @@
 		list_move_tail(&roc->list, &tmp_list);
 		roc->abort = true;
 	}
-
-	ieee80211_start_next_roc(local);
 	mutex_unlock(&local->mtx);
 
 	list_for_each_entry_safe(roc, tmp, &tmp_list, list) {
diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c
index c4cdbde..43e60b5 100644
--- a/net/mac80211/scan.c
+++ b/net/mac80211/scan.c
@@ -917,7 +917,7 @@
 				       struct cfg80211_sched_scan_request *req)
 {
 	struct ieee80211_local *local = sdata->local;
-	struct ieee80211_sched_scan_ies sched_scan_ies;
+	struct ieee80211_sched_scan_ies sched_scan_ies = {};
 	int ret, i;
 
 	mutex_lock(&local->mtx);
diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c
index 0a4e4c0..d2eb64e 100644
--- a/net/mac80211/sta_info.c
+++ b/net/mac80211/sta_info.c
@@ -117,8 +117,8 @@
 
 	for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
 		local->total_ps_buffered -= skb_queue_len(&sta->ps_tx_buf[ac]);
-		__skb_queue_purge(&sta->ps_tx_buf[ac]);
-		__skb_queue_purge(&sta->tx_filtered[ac]);
+		ieee80211_purge_tx_queue(&local->hw, &sta->ps_tx_buf[ac]);
+		ieee80211_purge_tx_queue(&local->hw, &sta->tx_filtered[ac]);
 	}
 
 #ifdef CONFIG_MAC80211_MESH
@@ -141,7 +141,7 @@
 		tid_tx = rcu_dereference_raw(sta->ampdu_mlme.tid_tx[i]);
 		if (!tid_tx)
 			continue;
-		__skb_queue_purge(&tid_tx->pending);
+		ieee80211_purge_tx_queue(&local->hw, &tid_tx->pending);
 		kfree(tid_tx);
 	}
 
@@ -961,6 +961,7 @@
 	struct ieee80211_local *local = sdata->local;
 	struct sk_buff_head pending;
 	int filtered = 0, buffered = 0, ac;
+	unsigned long flags;
 
 	clear_sta_flag(sta, WLAN_STA_SP);
 
@@ -976,12 +977,16 @@
 	for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
 		int count = skb_queue_len(&pending), tmp;
 
+		spin_lock_irqsave(&sta->tx_filtered[ac].lock, flags);
 		skb_queue_splice_tail_init(&sta->tx_filtered[ac], &pending);
+		spin_unlock_irqrestore(&sta->tx_filtered[ac].lock, flags);
 		tmp = skb_queue_len(&pending);
 		filtered += tmp - count;
 		count = tmp;
 
+		spin_lock_irqsave(&sta->ps_tx_buf[ac].lock, flags);
 		skb_queue_splice_tail_init(&sta->ps_tx_buf[ac], &pending);
+		spin_unlock_irqrestore(&sta->ps_tx_buf[ac].lock, flags);
 		tmp = skb_queue_len(&pending);
 		buffered += tmp - count;
 	}
diff --git a/net/mac80211/status.c b/net/mac80211/status.c
index 3af0cc4..101eb88 100644
--- a/net/mac80211/status.c
+++ b/net/mac80211/status.c
@@ -668,3 +668,12 @@
 	dev_kfree_skb_any(skb);
 }
 EXPORT_SYMBOL(ieee80211_free_txskb);
+
+void ieee80211_purge_tx_queue(struct ieee80211_hw *hw,
+			      struct sk_buff_head *skbs)
+{
+	struct sk_buff *skb;
+
+	while ((skb = __skb_dequeue(skbs)))
+		ieee80211_free_txskb(hw, skb);
+}
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index c9bf83f..b858ebe 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -1358,7 +1358,7 @@
 		if (tx->skb)
 			ieee80211_free_txskb(&tx->local->hw, tx->skb);
 		else
-			__skb_queue_purge(&tx->skbs);
+			ieee80211_purge_tx_queue(&tx->local->hw, &tx->skbs);
 		return -1;
 	} else if (unlikely(res == TX_QUEUED)) {
 		I802_DEBUG_INC(tx->local->tx_handlers_queued);
@@ -2120,10 +2120,13 @@
  */
 void ieee80211_clear_tx_pending(struct ieee80211_local *local)
 {
+	struct sk_buff *skb;
 	int i;
 
-	for (i = 0; i < local->hw.queues; i++)
-		skb_queue_purge(&local->pending[i]);
+	for (i = 0; i < local->hw.queues; i++) {
+		while ((skb = skb_dequeue(&local->pending[i])) != NULL)
+			ieee80211_free_txskb(&local->hw, skb);
+	}
 }
 
 /*
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 2393918..0151ae3 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -1491,6 +1491,8 @@
 		list_for_each_entry(sdata, &local->interfaces, list) {
 			if (sdata->vif.type != NL80211_IFTYPE_STATION)
 				continue;
+			if (!sdata->u.mgd.associated)
+				continue;
 
 			ieee80211_send_nullfunc(local, sdata, 0);
 		}
diff --git a/net/netfilter/ipset/ip_set_hash_ip.c b/net/netfilter/ipset/ip_set_hash_ip.c
index ec3dba5..5c0b785 100644
--- a/net/netfilter/ipset/ip_set_hash_ip.c
+++ b/net/netfilter/ipset/ip_set_hash_ip.c
@@ -173,6 +173,7 @@
 		return adtfn(set, &nip, timeout, flags);
 	}
 
+	ip_to = ip;
 	if (tb[IPSET_ATTR_IP_TO]) {
 		ret = ip_set_get_hostipaddr4(tb[IPSET_ATTR_IP_TO], &ip_to);
 		if (ret)
@@ -185,8 +186,7 @@
 		if (!cidr || cidr > 32)
 			return -IPSET_ERR_INVALID_CIDR;
 		ip_set_mask_from_to(ip, ip_to, cidr);
-	} else
-		ip_to = ip;
+	}
 
 	hosts = h->netmask == 32 ? 1 : 2 << (32 - h->netmask - 1);
 
diff --git a/net/netfilter/ipset/ip_set_hash_ipport.c b/net/netfilter/ipset/ip_set_hash_ipport.c
index 0171f75..6283351 100644
--- a/net/netfilter/ipset/ip_set_hash_ipport.c
+++ b/net/netfilter/ipset/ip_set_hash_ipport.c
@@ -162,7 +162,7 @@
 	const struct ip_set_hash *h = set->data;
 	ipset_adtfn adtfn = set->variant->adt[adt];
 	struct hash_ipport4_elem data = { };
-	u32 ip, ip_to = 0, p = 0, port, port_to;
+	u32 ip, ip_to, p = 0, port, port_to;
 	u32 timeout = h->timeout;
 	bool with_ports = false;
 	int ret;
@@ -210,7 +210,7 @@
 		return ip_set_eexist(ret, flags) ? 0 : ret;
 	}
 
-	ip = ntohl(data.ip);
+	ip_to = ip = ntohl(data.ip);
 	if (tb[IPSET_ATTR_IP_TO]) {
 		ret = ip_set_get_hostipaddr4(tb[IPSET_ATTR_IP_TO], &ip_to);
 		if (ret)
@@ -223,8 +223,7 @@
 		if (!cidr || cidr > 32)
 			return -IPSET_ERR_INVALID_CIDR;
 		ip_set_mask_from_to(ip, ip_to, cidr);
-	} else
-		ip_to = ip;
+	}
 
 	port_to = port = ntohs(data.port);
 	if (with_ports && tb[IPSET_ATTR_PORT_TO]) {
diff --git a/net/netfilter/ipset/ip_set_hash_ipportip.c b/net/netfilter/ipset/ip_set_hash_ipportip.c
index 6344ef5..6a21271 100644
--- a/net/netfilter/ipset/ip_set_hash_ipportip.c
+++ b/net/netfilter/ipset/ip_set_hash_ipportip.c
@@ -166,7 +166,7 @@
 	const struct ip_set_hash *h = set->data;
 	ipset_adtfn adtfn = set->variant->adt[adt];
 	struct hash_ipportip4_elem data = { };
-	u32 ip, ip_to = 0, p = 0, port, port_to;
+	u32 ip, ip_to, p = 0, port, port_to;
 	u32 timeout = h->timeout;
 	bool with_ports = false;
 	int ret;
@@ -218,7 +218,7 @@
 		return ip_set_eexist(ret, flags) ? 0 : ret;
 	}
 
-	ip = ntohl(data.ip);
+	ip_to = ip = ntohl(data.ip);
 	if (tb[IPSET_ATTR_IP_TO]) {
 		ret = ip_set_get_hostipaddr4(tb[IPSET_ATTR_IP_TO], &ip_to);
 		if (ret)
@@ -231,8 +231,7 @@
 		if (!cidr || cidr > 32)
 			return -IPSET_ERR_INVALID_CIDR;
 		ip_set_mask_from_to(ip, ip_to, cidr);
-	} else
-		ip_to = ip;
+	}
 
 	port_to = port = ntohs(data.port);
 	if (with_ports && tb[IPSET_ATTR_PORT_TO]) {
diff --git a/net/netfilter/ipset/ip_set_hash_ipportnet.c b/net/netfilter/ipset/ip_set_hash_ipportnet.c
index cb71f9a..2d5cd4e 100644
--- a/net/netfilter/ipset/ip_set_hash_ipportnet.c
+++ b/net/netfilter/ipset/ip_set_hash_ipportnet.c
@@ -215,8 +215,8 @@
 	const struct ip_set_hash *h = set->data;
 	ipset_adtfn adtfn = set->variant->adt[adt];
 	struct hash_ipportnet4_elem data = { .cidr = HOST_MASK - 1 };
-	u32 ip, ip_to = 0, p = 0, port, port_to;
-	u32 ip2_from = 0, ip2_to, ip2_last, ip2;
+	u32 ip, ip_to, p = 0, port, port_to;
+	u32 ip2_from, ip2_to, ip2_last, ip2;
 	u32 timeout = h->timeout;
 	bool with_ports = false;
 	u8 cidr;
@@ -286,6 +286,7 @@
 		return ip_set_eexist(ret, flags) ? 0 : ret;
 	}
 
+	ip_to = ip;
 	if (tb[IPSET_ATTR_IP_TO]) {
 		ret = ip_set_get_hostipaddr4(tb[IPSET_ATTR_IP_TO], &ip_to);
 		if (ret)
@@ -306,6 +307,8 @@
 		if (port > port_to)
 			swap(port, port_to);
 	}
+
+	ip2_to = ip2_from;
 	if (tb[IPSET_ATTR_IP2_TO]) {
 		ret = ip_set_get_hostipaddr4(tb[IPSET_ATTR_IP2_TO], &ip2_to);
 		if (ret)
diff --git a/net/netfilter/ipset/ip_set_hash_netiface.c b/net/netfilter/ipset/ip_set_hash_netiface.c
index b9a6338..45a1014 100644
--- a/net/netfilter/ipset/ip_set_hash_netiface.c
+++ b/net/netfilter/ipset/ip_set_hash_netiface.c
@@ -793,7 +793,7 @@
 		[IPSET_ATTR_IP]		= { .type = NLA_NESTED },
 		[IPSET_ATTR_IP_TO]	= { .type = NLA_NESTED },
 		[IPSET_ATTR_IFACE]	= { .type = NLA_NUL_STRING,
-					    .len = IPSET_MAXNAMELEN - 1 },
+					    .len  = IFNAMSIZ - 1 },
 		[IPSET_ATTR_CADT_FLAGS]	= { .type = NLA_U32 },
 		[IPSET_ATTR_CIDR]	= { .type = NLA_U8 },
 		[IPSET_ATTR_TIMEOUT]	= { .type = NLA_U32 },
diff --git a/net/netfilter/nfnetlink_cttimeout.c b/net/netfilter/nfnetlink_cttimeout.c
index 8847b4d..701c88a 100644
--- a/net/netfilter/nfnetlink_cttimeout.c
+++ b/net/netfilter/nfnetlink_cttimeout.c
@@ -41,7 +41,8 @@
 static LIST_HEAD(cttimeout_list);
 
 static const struct nla_policy cttimeout_nla_policy[CTA_TIMEOUT_MAX+1] = {
-	[CTA_TIMEOUT_NAME]	= { .type = NLA_NUL_STRING },
+	[CTA_TIMEOUT_NAME]	= { .type = NLA_NUL_STRING,
+				    .len  = CTNL_TIMEOUT_NAME_MAX - 1},
 	[CTA_TIMEOUT_L3PROTO]	= { .type = NLA_U16 },
 	[CTA_TIMEOUT_L4PROTO]	= { .type = NLA_U8 },
 	[CTA_TIMEOUT_DATA]	= { .type = NLA_NESTED },
diff --git a/net/nfc/llcp/llcp.c b/net/nfc/llcp/llcp.c
index cc10d07..9e8f4b2 100644
--- a/net/nfc/llcp/llcp.c
+++ b/net/nfc/llcp/llcp.c
@@ -1210,7 +1210,7 @@
 	local->remote_miu = LLCP_DEFAULT_MIU;
 	local->remote_lto = LLCP_DEFAULT_LTO;
 
-	list_add(&llcp_devices, &local->list);
+	list_add(&local->list, &llcp_devices);
 
 	return 0;
 }
diff --git a/net/openvswitch/flow.c b/net/openvswitch/flow.c
index 98c7063..733cbf4 100644
--- a/net/openvswitch/flow.c
+++ b/net/openvswitch/flow.c
@@ -702,15 +702,11 @@
 			/* We only match on the lower 8 bits of the opcode. */
 			if (ntohs(arp->ar_op) <= 0xff)
 				key->ip.proto = ntohs(arp->ar_op);
-
-			if (key->ip.proto == ARPOP_REQUEST
-					|| key->ip.proto == ARPOP_REPLY) {
-				memcpy(&key->ipv4.addr.src, arp->ar_sip, sizeof(key->ipv4.addr.src));
-				memcpy(&key->ipv4.addr.dst, arp->ar_tip, sizeof(key->ipv4.addr.dst));
-				memcpy(key->ipv4.arp.sha, arp->ar_sha, ETH_ALEN);
-				memcpy(key->ipv4.arp.tha, arp->ar_tha, ETH_ALEN);
-				key_len = SW_FLOW_KEY_OFFSET(ipv4.arp);
-			}
+			memcpy(&key->ipv4.addr.src, arp->ar_sip, sizeof(key->ipv4.addr.src));
+			memcpy(&key->ipv4.addr.dst, arp->ar_tip, sizeof(key->ipv4.addr.dst));
+			memcpy(key->ipv4.arp.sha, arp->ar_sha, ETH_ALEN);
+			memcpy(key->ipv4.arp.tha, arp->ar_tha, ETH_ALEN);
+			key_len = SW_FLOW_KEY_OFFSET(ipv4.arp);
 		}
 	} else if (key->eth.type == htons(ETH_P_IPV6)) {
 		int nh_len;             /* IPv6 Header + Extensions */
diff --git a/net/openvswitch/vport-netdev.c b/net/openvswitch/vport-netdev.c
index 3c1e58b..a903348 100644
--- a/net/openvswitch/vport-netdev.c
+++ b/net/openvswitch/vport-netdev.c
@@ -158,7 +158,7 @@
 
 	if (unlikely(packet_length(skb) > mtu && !skb_is_gso(skb))) {
 		net_warn_ratelimited("%s: dropped over-mtu packet: %d > %d\n",
-				     ovs_dp_name(vport->dp),
+				     netdev_vport->dev->name,
 				     packet_length(skb), mtu);
 		goto error;
 	}
diff --git a/net/sctp/chunk.c b/net/sctp/chunk.c
index 7c2df9c..69ce21e 100644
--- a/net/sctp/chunk.c
+++ b/net/sctp/chunk.c
@@ -183,7 +183,7 @@
 
 	msg = sctp_datamsg_new(GFP_KERNEL);
 	if (!msg)
-		return NULL;
+		return ERR_PTR(-ENOMEM);
 
 	/* Note: Calculate this outside of the loop, so that all fragments
 	 * have the same expiration.
@@ -280,11 +280,14 @@
 
 		chunk = sctp_make_datafrag_empty(asoc, sinfo, len, frag, 0);
 
-		if (!chunk)
+		if (!chunk) {
+			err = -ENOMEM;
 			goto errout;
+		}
+
 		err = sctp_user_addto_chunk(chunk, offset, len, msgh->msg_iov);
 		if (err < 0)
-			goto errout;
+			goto errout_chunk_free;
 
 		offset += len;
 
@@ -315,8 +318,10 @@
 
 		chunk = sctp_make_datafrag_empty(asoc, sinfo, over, frag, 0);
 
-		if (!chunk)
+		if (!chunk) {
+			err = -ENOMEM;
 			goto errout;
+		}
 
 		err = sctp_user_addto_chunk(chunk, offset, over,msgh->msg_iov);
 
@@ -324,7 +329,7 @@
 		__skb_pull(chunk->skb, (__u8 *)chunk->chunk_hdr
 			   - (__u8 *)chunk->skb->data);
 		if (err < 0)
-			goto errout;
+			goto errout_chunk_free;
 
 		sctp_datamsg_assign(msg, chunk);
 		list_add_tail(&chunk->frag_list, &msg->chunks);
@@ -332,6 +337,9 @@
 
 	return msg;
 
+errout_chunk_free:
+	sctp_chunk_free(chunk);
+
 errout:
 	list_for_each_safe(pos, temp, &msg->chunks) {
 		list_del_init(pos);
@@ -339,7 +347,7 @@
 		sctp_chunk_free(chunk);
 	}
 	sctp_datamsg_put(msg);
-	return NULL;
+	return ERR_PTR(err);
 }
 
 /* Check whether this message has expired. */
diff --git a/net/sctp/proc.c b/net/sctp/proc.c
index c3bea26..9966e7b 100644
--- a/net/sctp/proc.c
+++ b/net/sctp/proc.c
@@ -102,7 +102,7 @@
 	.open	 = sctp_snmp_seq_open,
 	.read	 = seq_read,
 	.llseek	 = seq_lseek,
-	.release = single_release,
+	.release = single_release_net,
 };
 
 /* Set up the proc fs entry for 'snmp' object. */
@@ -251,7 +251,7 @@
 	.open	 = sctp_eps_seq_open,
 	.read	 = seq_read,
 	.llseek	 = seq_lseek,
-	.release = seq_release,
+	.release = seq_release_net,
 };
 
 /* Set up the proc fs entry for 'eps' object. */
@@ -372,7 +372,7 @@
 	.open	 = sctp_assocs_seq_open,
 	.read	 = seq_read,
 	.llseek	 = seq_lseek,
-	.release = seq_release,
+	.release = seq_release_net,
 };
 
 /* Set up the proc fs entry for 'assocs' object. */
@@ -517,7 +517,7 @@
 	.open = sctp_remaddr_seq_open,
 	.read = seq_read,
 	.llseek = seq_lseek,
-	.release = seq_release,
+	.release = seq_release_net,
 };
 
 int __net_init sctp_remaddr_proc_init(struct net *net)
diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index a60d1f8..406d957 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -1915,8 +1915,8 @@
 
 	/* Break the message into multiple chunks of maximum size. */
 	datamsg = sctp_datamsg_from_user(asoc, sinfo, msg, msg_len);
-	if (!datamsg) {
-		err = -ENOMEM;
+	if (IS_ERR(datamsg)) {
+		err = PTR_ERR(datamsg);
 		goto out_free;
 	}
 
diff --git a/net/sctp/transport.c b/net/sctp/transport.c
index 953c21e..206cf52 100644
--- a/net/sctp/transport.c
+++ b/net/sctp/transport.c
@@ -331,7 +331,7 @@
 		 * 1/8, rto_alpha would be expressed as 3.
 		 */
 		tp->rttvar = tp->rttvar - (tp->rttvar >> net->sctp.rto_beta)
-			+ ((abs(tp->srtt - rtt)) >> net->sctp.rto_beta);
+			+ (((__u32)abs64((__s64)tp->srtt - (__s64)rtt)) >> net->sctp.rto_beta);
 		tp->srtt = tp->srtt - (tp->srtt >> net->sctp.rto_alpha)
 			+ (rtt >> net->sctp.rto_alpha);
 	} else {
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index bcc7d7e..b75756b 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -141,9 +141,8 @@
 	.reg_rules = {
 		/* IEEE 802.11b/g, channels 1..11 */
 		REG_RULE(2412-10, 2462+10, 40, 6, 20, 0),
-		/* IEEE 802.11b/g, channels 12..13. No HT40
-		 * channel fits here. */
-		REG_RULE(2467-10, 2472+10, 20, 6, 20,
+		/* IEEE 802.11b/g, channels 12..13. */
+		REG_RULE(2467-10, 2472+10, 40, 6, 20,
 			NL80211_RRF_PASSIVE_SCAN |
 			NL80211_RRF_NO_IBSS),
 		/* IEEE 802.11 channel 14 - Only JP enables
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index 0be6f11..bdf42fd 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -266,6 +266,9 @@
 quiet_cmd_dtc = DTC     $@
 cmd_dtc = $(objtree)/scripts/dtc/dtc -O dtb -o $@ -b 0 $(DTC_FLAGS) -d $(depfile) $<
 
+$(obj)/%.dtb: $(src)/%.dts FORCE
+	$(call if_changed_dep,dtc)
+
 # Bzip2
 # ---------------------------------------------------------------------------
 
diff --git a/scripts/dtc/Makefile b/scripts/dtc/Makefile
index 6d1c6bb..2a48022 100644
--- a/scripts/dtc/Makefile
+++ b/scripts/dtc/Makefile
@@ -27,3 +27,5 @@
 # dependencies on generated files need to be listed explicitly
 $(obj)/dtc-lexer.lex.o: $(obj)/dtc-parser.tab.h
 
+# generated files need to be cleaned explicitly
+clean-files	:= dtc-lexer.lex.c dtc-parser.tab.c dtc-parser.tab.h
diff --git a/scripts/headers_install.pl b/scripts/headers_install.pl
index 239d22d..6c353ae 100644
--- a/scripts/headers_install.pl
+++ b/scripts/headers_install.pl
@@ -42,6 +42,9 @@
 		$line =~ s/(^|\s)(inline)\b/$1__$2__/g;
 		$line =~ s/(^|\s)(asm)\b(\s|[(]|$)/$1__$2__$3/g;
 		$line =~ s/(^|\s|[(])(volatile)\b(\s|[(]|$)/$1__$2__$3/g;
+		$line =~ s/#ifndef _UAPI/#ifndef /;
+		$line =~ s/#define _UAPI/#define /;
+		$line =~ s!#endif /[*] _UAPI!#endif /* !;
 		printf {$out} "%s", $line;
 	}
 	close $out;
diff --git a/scripts/kconfig/expr.h b/scripts/kconfig/expr.h
index bd2e098..cdd4860 100644
--- a/scripts/kconfig/expr.h
+++ b/scripts/kconfig/expr.h
@@ -12,7 +12,7 @@
 
 #include <assert.h>
 #include <stdio.h>
-#include <sys/queue.h>
+#include "list.h"
 #ifndef __cplusplus
 #include <stdbool.h>
 #endif
@@ -175,12 +175,11 @@
 #define MENU_ROOT		0x0002
 
 struct jump_key {
-	CIRCLEQ_ENTRY(jump_key) entries;
+	struct list_head entries;
 	size_t offset;
 	struct menu *target;
 	int index;
 };
-CIRCLEQ_HEAD(jk_head, jump_key);
 
 #define JUMP_NB			9
 
diff --git a/scripts/kconfig/list.h b/scripts/kconfig/list.h
new file mode 100644
index 0000000..0ae730b
--- /dev/null
+++ b/scripts/kconfig/list.h
@@ -0,0 +1,91 @@
+#ifndef LIST_H
+#define LIST_H
+
+/*
+ * Copied from include/linux/...
+ */
+
+#undef offsetof
+#define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER)
+
+/**
+ * container_of - cast a member of a structure out to the containing structure
+ * @ptr:        the pointer to the member.
+ * @type:       the type of the container struct this is embedded in.
+ * @member:     the name of the member within the struct.
+ *
+ */
+#define container_of(ptr, type, member) ({                      \
+	const typeof( ((type *)0)->member ) *__mptr = (ptr);    \
+	(type *)( (char *)__mptr - offsetof(type,member) );})
+
+
+struct list_head {
+	struct list_head *next, *prev;
+};
+
+
+#define LIST_HEAD_INIT(name) { &(name), &(name) }
+
+#define LIST_HEAD(name) \
+	struct list_head name = LIST_HEAD_INIT(name)
+
+/**
+ * list_entry - get the struct for this entry
+ * @ptr:	the &struct list_head pointer.
+ * @type:	the type of the struct this is embedded in.
+ * @member:	the name of the list_struct within the struct.
+ */
+#define list_entry(ptr, type, member) \
+	container_of(ptr, type, member)
+
+/**
+ * list_for_each_entry	-	iterate over list of given type
+ * @pos:	the type * to use as a loop cursor.
+ * @head:	the head for your list.
+ * @member:	the name of the list_struct within the struct.
+ */
+#define list_for_each_entry(pos, head, member)				\
+	for (pos = list_entry((head)->next, typeof(*pos), member);	\
+	     &pos->member != (head); 	\
+	     pos = list_entry(pos->member.next, typeof(*pos), member))
+
+/**
+ * list_empty - tests whether a list is empty
+ * @head: the list to test.
+ */
+static inline int list_empty(const struct list_head *head)
+{
+	return head->next == head;
+}
+
+/*
+ * Insert a new entry between two known consecutive entries.
+ *
+ * This is only for internal list manipulation where we know
+ * the prev/next entries already!
+ */
+static inline void __list_add(struct list_head *_new,
+			      struct list_head *prev,
+			      struct list_head *next)
+{
+	next->prev = _new;
+	_new->next = next;
+	_new->prev = prev;
+	prev->next = _new;
+}
+
+/**
+ * list_add_tail - add a new entry
+ * @new: new entry to be added
+ * @head: list head to add it before
+ *
+ * Insert a new entry before the specified head.
+ * This is useful for implementing queues.
+ */
+static inline void list_add_tail(struct list_head *_new, struct list_head *head)
+{
+	__list_add(_new, head->prev, head);
+}
+
+#endif
diff --git a/scripts/kconfig/lkc_proto.h b/scripts/kconfig/lkc_proto.h
index 1d1c085..ef1a738 100644
--- a/scripts/kconfig/lkc_proto.h
+++ b/scripts/kconfig/lkc_proto.h
@@ -21,9 +21,9 @@
 P(menu_get_parent_menu,struct menu *,(struct menu *menu));
 P(menu_has_help,bool,(struct menu *menu));
 P(menu_get_help,const char *,(struct menu *menu));
-P(get_symbol_str, void, (struct gstr *r, struct symbol *sym, struct jk_head
+P(get_symbol_str, void, (struct gstr *r, struct symbol *sym, struct list_head
 			 *head));
-P(get_relations_str, struct gstr, (struct symbol **sym_arr, struct jk_head
+P(get_relations_str, struct gstr, (struct symbol **sym_arr, struct list_head
 				   *head));
 P(menu_get_ext_help,void,(struct menu *menu, struct gstr *help));
 
diff --git a/scripts/kconfig/mconf.c b/scripts/kconfig/mconf.c
index 48f6744..53975cf 100644
--- a/scripts/kconfig/mconf.c
+++ b/scripts/kconfig/mconf.c
@@ -312,7 +312,7 @@
 
 
 struct search_data {
-	struct jk_head *head;
+	struct list_head *head;
 	struct menu **targets;
 	int *keys;
 };
@@ -323,7 +323,7 @@
 	struct jump_key *pos;
 	int k = 0;
 
-	CIRCLEQ_FOREACH(pos, data->head, entries) {
+	list_for_each_entry(pos, data->head, entries) {
 		if (pos->offset >= start && pos->offset < end) {
 			char header[4];
 
@@ -375,7 +375,7 @@
 
 	sym_arr = sym_re_search(dialog_input);
 	do {
-		struct jk_head head = CIRCLEQ_HEAD_INITIALIZER(head);
+		LIST_HEAD(head);
 		struct menu *targets[JUMP_NB];
 		int keys[JUMP_NB + 1], i;
 		struct search_data data = {
diff --git a/scripts/kconfig/menu.c b/scripts/kconfig/menu.c
index a3cade6..e98a05c 100644
--- a/scripts/kconfig/menu.c
+++ b/scripts/kconfig/menu.c
@@ -508,7 +508,7 @@
 }
 
 static void get_prompt_str(struct gstr *r, struct property *prop,
-			   struct jk_head *head)
+			   struct list_head *head)
 {
 	int i, j;
 	struct menu *submenu[8], *menu, *location = NULL;
@@ -544,12 +544,13 @@
 		} else
 			jump->target = location;
 
-		if (CIRCLEQ_EMPTY(head))
+		if (list_empty(head))
 			jump->index = 0;
 		else
-			jump->index = CIRCLEQ_LAST(head)->index + 1;
+			jump->index = list_entry(head->prev, struct jump_key,
+						 entries)->index + 1;
 
-		CIRCLEQ_INSERT_TAIL(head, jump, entries);
+		list_add_tail(&jump->entries, head);
 	}
 
 	if (i > 0) {
@@ -573,7 +574,8 @@
 /*
  * head is optional and may be NULL
  */
-void get_symbol_str(struct gstr *r, struct symbol *sym, struct jk_head *head)
+void get_symbol_str(struct gstr *r, struct symbol *sym,
+		    struct list_head *head)
 {
 	bool hit;
 	struct property *prop;
@@ -612,7 +614,7 @@
 	str_append(r, "\n\n");
 }
 
-struct gstr get_relations_str(struct symbol **sym_arr, struct jk_head *head)
+struct gstr get_relations_str(struct symbol **sym_arr, struct list_head *head)
 {
 	struct symbol *sym;
 	struct gstr res = str_new();
diff --git a/scripts/sign-file b/scripts/sign-file
index 87ca59d..974a20b 100755
--- a/scripts/sign-file
+++ b/scripts/sign-file
@@ -156,12 +156,12 @@
 
 	if ($l == 0x1) {
 	    $len = unpack("C", substr(${$cursor->[2]}, $cursor->[0], 1));
-	} elsif ($l = 0x2) {
+	} elsif ($l == 0x2) {
 	    $len = unpack("n", substr(${$cursor->[2]}, $cursor->[0], 2));
-	} elsif ($l = 0x3) {
+	} elsif ($l == 0x3) {
 	    $len = unpack("C", substr(${$cursor->[2]}, $cursor->[0], 1)) << 16;
 	    $len = unpack("n", substr(${$cursor->[2]}, $cursor->[0] + 1, 2));
-	} elsif ($l = 0x4) {
+	} elsif ($l == 0x4) {
 	    $len = unpack("N", substr(${$cursor->[2]}, $cursor->[0], 4));
 	} else {
 	    die $x509, ": ", $cursor->[0], ": ASN.1 element too long (", $l, ")\n";
diff --git a/security/device_cgroup.c b/security/device_cgroup.c
index 842c254..b08d20c 100644
--- a/security/device_cgroup.c
+++ b/security/device_cgroup.c
@@ -164,8 +164,8 @@
 	struct dev_exception_item *ex, *tmp;
 
 	list_for_each_entry_safe(ex, tmp, &dev_cgroup->exceptions, list) {
-		list_del(&ex->list);
-		kfree(ex);
+		list_del_rcu(&ex->list);
+		kfree_rcu(ex, rcu);
 	}
 }
 
@@ -298,7 +298,7 @@
 	struct dev_exception_item *ex;
 	bool match = false;
 
-	list_for_each_entry(ex, &dev_cgroup->exceptions, list) {
+	list_for_each_entry_rcu(ex, &dev_cgroup->exceptions, list) {
 		if ((refex->type & DEV_BLOCK) && !(ex->type & DEV_BLOCK))
 			continue;
 		if ((refex->type & DEV_CHAR) && !(ex->type & DEV_CHAR))
@@ -352,6 +352,8 @@
  */
 static inline int may_allow_all(struct dev_cgroup *parent)
 {
+	if (!parent)
+		return 1;
 	return parent->behavior == DEVCG_DEFAULT_ALLOW;
 }
 
@@ -376,11 +378,14 @@
 	int count, rc;
 	struct dev_exception_item ex;
 	struct cgroup *p = devcgroup->css.cgroup;
-	struct dev_cgroup *parent = cgroup_to_devcgroup(p->parent);
+	struct dev_cgroup *parent = NULL;
 
 	if (!capable(CAP_SYS_ADMIN))
 		return -EPERM;
 
+	if (p->parent)
+		parent = cgroup_to_devcgroup(p->parent);
+
 	memset(&ex, 0, sizeof(ex));
 	b = buffer;
 
@@ -391,11 +396,14 @@
 			if (!may_allow_all(parent))
 				return -EPERM;
 			dev_exception_clean(devcgroup);
+			devcgroup->behavior = DEVCG_DEFAULT_ALLOW;
+			if (!parent)
+				break;
+
 			rc = dev_exceptions_copy(&devcgroup->exceptions,
 						 &parent->exceptions);
 			if (rc)
 				return rc;
-			devcgroup->behavior = DEVCG_DEFAULT_ALLOW;
 			break;
 		case DEVCG_DENY:
 			dev_exception_clean(devcgroup);
diff --git a/security/selinux/netnode.c b/security/selinux/netnode.c
index 28f911c..c5454c0 100644
--- a/security/selinux/netnode.c
+++ b/security/selinux/netnode.c
@@ -174,7 +174,8 @@
 	if (sel_netnode_hash[idx].size == SEL_NETNODE_HASH_BKT_LIMIT) {
 		struct sel_netnode *tail;
 		tail = list_entry(
-			rcu_dereference(sel_netnode_hash[idx].list.prev),
+			rcu_dereference_protected(sel_netnode_hash[idx].list.prev,
+						  lockdep_is_held(&sel_netnode_lock)),
 			struct sel_netnode, list);
 		list_del_rcu(&tail->list);
 		kfree_rcu(tail, rcu);
diff --git a/sound/pci/es1968.c b/sound/pci/es1968.c
index 50169bc..7266020 100644
--- a/sound/pci/es1968.c
+++ b/sound/pci/es1968.c
@@ -2581,9 +2581,14 @@
 	struct es1968 *chip = tea->private_data;
 	unsigned long io = chip->io_port + GPIO_DATA;
 	u16 val = inw(io);
+	u8 ret;
 
-	return  (val & STR_DATA) ? TEA575X_DATA : 0 |
-		(val & STR_MOST) ? TEA575X_MOST : 0;
+	ret = 0;
+	if (val & STR_DATA)
+		ret |= TEA575X_DATA;
+	if (val & STR_MOST)
+		ret |= TEA575X_MOST;
+	return ret;
 }
 
 static void snd_es1968_tea575x_set_direction(struct snd_tea575x *tea, bool output)
diff --git a/sound/pci/fm801.c b/sound/pci/fm801.c
index cc2e91d..c5806f8 100644
--- a/sound/pci/fm801.c
+++ b/sound/pci/fm801.c
@@ -767,9 +767,14 @@
 	struct fm801 *chip = tea->private_data;
 	unsigned short reg = inw(FM801_REG(chip, GPIO_CTRL));
 	struct snd_fm801_tea575x_gpio gpio = *get_tea575x_gpio(chip);
+	u8 ret;
 
-	return  (reg & FM801_GPIO_GP(gpio.data)) ? TEA575X_DATA : 0 |
-		(reg & FM801_GPIO_GP(gpio.most)) ? TEA575X_MOST : 0;
+	ret = 0;
+	if (reg & FM801_GPIO_GP(gpio.data))
+		ret |= TEA575X_DATA;
+	if (reg & FM801_GPIO_GP(gpio.most))
+		ret |= TEA575X_MOST;
+	return ret;
 }
 
 static void snd_fm801_tea575x_set_direction(struct snd_tea575x *tea, bool output)
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index 70d4848..d010de1 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -95,6 +95,7 @@
 EXPORT_SYMBOL_HDA(snd_hda_delete_codec_preset);
 
 #ifdef CONFIG_PM
+#define codec_in_pm(codec)	((codec)->in_pm)
 static void hda_power_work(struct work_struct *work);
 static void hda_keep_power_on(struct hda_codec *codec);
 #define hda_codec_is_power_on(codec)	((codec)->power_on)
@@ -104,6 +105,7 @@
 		bus->ops.pm_notify(bus, power_up);
 }
 #else
+#define codec_in_pm(codec)	0
 static inline void hda_keep_power_on(struct hda_codec *codec) {}
 #define hda_codec_is_power_on(codec)	1
 #define hda_call_pm_notify(bus, state) {}
@@ -228,7 +230,7 @@
 	}
 	mutex_unlock(&bus->cmd_mutex);
 	snd_hda_power_down(codec);
-	if (res && *res == -1 && bus->rirb_error) {
+	if (!codec_in_pm(codec) && res && *res == -1 && bus->rirb_error) {
 		if (bus->response_reset) {
 			snd_printd("hda_codec: resetting BUS due to "
 				   "fatal communication error\n");
@@ -238,7 +240,7 @@
 		goto again;
 	}
 	/* clear reset-flag when the communication gets recovered */
-	if (!err)
+	if (!err || codec_in_pm(codec))
 		bus->response_reset = 0;
 	return err;
 }
@@ -3616,6 +3618,8 @@
 {
 	unsigned int state;
 
+	codec->in_pm = 1;
+
 	if (codec->patch_ops.suspend)
 		codec->patch_ops.suspend(codec);
 	hda_cleanup_all_streams(codec);
@@ -3630,6 +3634,7 @@
 	codec->power_transition = 0;
 	codec->power_jiffies = jiffies;
 	spin_unlock(&codec->power_lock);
+	codec->in_pm = 0;
 	return state;
 }
 
@@ -3638,6 +3643,8 @@
  */
 static void hda_call_codec_resume(struct hda_codec *codec)
 {
+	codec->in_pm = 1;
+
 	/* set as if powered on for avoiding re-entering the resume
 	 * in the resume / power-save sequence
 	 */
@@ -3656,6 +3663,8 @@
 		snd_hda_codec_resume_cache(codec);
 	}
 	snd_hda_jack_report_sync(codec);
+
+	codec->in_pm = 0;
 	snd_hda_power_down(codec); /* flag down before returning */
 }
 #endif /* CONFIG_PM */
diff --git a/sound/pci/hda/hda_codec.h b/sound/pci/hda/hda_codec.h
index 507fe8a..4f4e545 100644
--- a/sound/pci/hda/hda_codec.h
+++ b/sound/pci/hda/hda_codec.h
@@ -869,6 +869,7 @@
 	unsigned int power_on :1;	/* current (global) power-state */
 	unsigned int d3_stop_clk:1;	/* support D3 operation without BCLK */
 	unsigned int pm_down_notified:1; /* PM notified to controller */
+	unsigned int in_pm:1;		/* suspend/resume being performed */
 	int power_transition;	/* power-state in transition */
 	int power_count;	/* current (global) power refcount */
 	struct delayed_work power_work; /* delayed task for powerdown */
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index cd2dbaf..f9d870e 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -556,6 +556,12 @@
 #define AZX_DCAPS_ALIGN_BUFSIZE	(1 << 22)	/* buffer size alignment */
 #define AZX_DCAPS_4K_BDLE_BOUNDARY (1 << 23)	/* BDLE in 4k boundary */
 #define AZX_DCAPS_COUNT_LPIB_DELAY  (1 << 25)	/* Take LPIB as delay */
+#define AZX_DCAPS_PM_RUNTIME	(1 << 26)	/* runtime PM support */
+
+/* quirks for Intel PCH */
+#define AZX_DCAPS_INTEL_PCH \
+	(AZX_DCAPS_SCH_SNOOP | AZX_DCAPS_BUFSIZE | \
+	 AZX_DCAPS_COUNT_LPIB_DELAY | AZX_DCAPS_PM_RUNTIME)
 
 /* quirks for ATI SB / AMD Hudson */
 #define AZX_DCAPS_PRESET_ATI_SB \
@@ -2433,6 +2439,9 @@
 {
 	struct azx *chip = bus->private_data;
 
+	if (!(chip->driver_caps & AZX_DCAPS_PM_RUNTIME))
+		return;
+
 	if (power_up)
 		pm_runtime_get_sync(&chip->pci->dev);
 	else
@@ -2548,7 +2557,8 @@
 	struct snd_card *card = dev_get_drvdata(dev);
 	struct azx *chip = card->private_data;
 
-	if (!power_save_controller)
+	if (!power_save_controller ||
+	    !(chip->driver_caps & AZX_DCAPS_PM_RUNTIME))
 		return -EAGAIN;
 
 	azx_stop_chip(chip);
@@ -3429,39 +3439,30 @@
 static DEFINE_PCI_DEVICE_TABLE(azx_ids) = {
 	/* CPT */
 	{ PCI_DEVICE(0x8086, 0x1c20),
-	  .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_SCH_SNOOP |
-	  AZX_DCAPS_BUFSIZE | AZX_DCAPS_COUNT_LPIB_DELAY },
+	  .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH },
 	/* PBG */
 	{ PCI_DEVICE(0x8086, 0x1d20),
-	  .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_SCH_SNOOP |
-	  AZX_DCAPS_BUFSIZE},
+	  .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH },
 	/* Panther Point */
 	{ PCI_DEVICE(0x8086, 0x1e20),
-	  .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_SCH_SNOOP |
-	  AZX_DCAPS_BUFSIZE | AZX_DCAPS_COUNT_LPIB_DELAY },
+	  .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH },
 	/* Lynx Point */
 	{ PCI_DEVICE(0x8086, 0x8c20),
-	  .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_SCH_SNOOP |
-	  AZX_DCAPS_BUFSIZE | AZX_DCAPS_COUNT_LPIB_DELAY },
+	  .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH },
 	/* Lynx Point-LP */
 	{ PCI_DEVICE(0x8086, 0x9c20),
-	  .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_SCH_SNOOP |
-	  AZX_DCAPS_BUFSIZE | AZX_DCAPS_COUNT_LPIB_DELAY },
+	  .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH },
 	/* Lynx Point-LP */
 	{ PCI_DEVICE(0x8086, 0x9c21),
-	  .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_SCH_SNOOP |
-	  AZX_DCAPS_BUFSIZE | AZX_DCAPS_COUNT_LPIB_DELAY },
+	  .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH },
 	/* Haswell */
 	{ PCI_DEVICE(0x8086, 0x0c0c),
-	  .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_SCH_SNOOP |
-	  AZX_DCAPS_BUFSIZE | AZX_DCAPS_COUNT_LPIB_DELAY },
+	  .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_INTEL_PCH },
 	{ PCI_DEVICE(0x8086, 0x0d0c),
-	  .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_SCH_SNOOP |
-	  AZX_DCAPS_BUFSIZE | AZX_DCAPS_COUNT_LPIB_DELAY },
+	  .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_INTEL_PCH },
 	/* 5 Series/3400 */
 	{ PCI_DEVICE(0x8086, 0x3b56),
-	  .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_SCH_SNOOP |
-	  AZX_DCAPS_BUFSIZE | AZX_DCAPS_COUNT_LPIB_DELAY },
+	  .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_INTEL_PCH },
 	/* SCH */
 	{ PCI_DEVICE(0x8086, 0x811b),
 	  .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_SCH_SNOOP |
diff --git a/sound/pci/hda/patch_cirrus.c b/sound/pci/hda/patch_cirrus.c
index d5f3a26..3bcb671 100644
--- a/sound/pci/hda/patch_cirrus.c
+++ b/sound/pci/hda/patch_cirrus.c
@@ -466,6 +466,7 @@
 		memcpy(cfg->speaker_pins, cfg->line_out_pins,
 		       sizeof(cfg->speaker_pins));
 		cfg->line_outs = 0;
+		memset(cfg->line_out_pins, 0, sizeof(cfg->line_out_pins));
 	}
 
 	return 0;
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index c0ce3b1..ad68d22 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -5407,6 +5407,7 @@
 	SND_PCI_QUIRK(0x106b, 0x4000, "MacbookPro 5,1", ALC889_FIXUP_IMAC91_VREF),
 	SND_PCI_QUIRK(0x106b, 0x4100, "Macmini 3,1", ALC889_FIXUP_IMAC91_VREF),
 	SND_PCI_QUIRK(0x106b, 0x4200, "Mac Pro 5,1", ALC885_FIXUP_MACPRO_GPIO),
+	SND_PCI_QUIRK(0x106b, 0x4300, "iMac 9,1", ALC889_FIXUP_IMAC91_VREF),
 	SND_PCI_QUIRK(0x106b, 0x4600, "MacbookPro 5,2", ALC889_FIXUP_IMAC91_VREF),
 	SND_PCI_QUIRK(0x106b, 0x4900, "iMac 9,1 Aluminum", ALC889_FIXUP_IMAC91_VREF),
 	SND_PCI_QUIRK(0x106b, 0x4a00, "Macbook 5,2", ALC889_FIXUP_IMAC91_VREF),
@@ -7064,6 +7065,7 @@
 	{ .id = 0x10ec0282, .name = "ALC282", .patch = patch_alc269 },
 	{ .id = 0x10ec0283, .name = "ALC283", .patch = patch_alc269 },
 	{ .id = 0x10ec0290, .name = "ALC290", .patch = patch_alc269 },
+	{ .id = 0x10ec0292, .name = "ALC292", .patch = patch_alc269 },
 	{ .id = 0x10ec0861, .rev = 0x100340, .name = "ALC660",
 	  .patch = patch_alc861 },
 	{ .id = 0x10ec0660, .name = "ALC660-VD", .patch = patch_alc861vd },
diff --git a/sound/soc/codecs/arizona.c b/sound/soc/codecs/arizona.c
index c03b65a..054967d 100644
--- a/sound/soc/codecs/arizona.c
+++ b/sound/soc/codecs/arizona.c
@@ -268,7 +268,7 @@
 static unsigned int arizona_sysclk_48k_rates[] = {
 	6144000,
 	12288000,
-	22579200,
+	24576000,
 	49152000,
 	73728000,
 	98304000,
@@ -278,7 +278,7 @@
 static unsigned int arizona_sysclk_44k1_rates[] = {
 	5644800,
 	11289600,
-	24576000,
+	22579200,
 	45158400,
 	67737600,
 	90316800,
diff --git a/sound/soc/codecs/cs4271.c b/sound/soc/codecs/cs4271.c
index f994af3..e3f0a7f 100644
--- a/sound/soc/codecs/cs4271.c
+++ b/sound/soc/codecs/cs4271.c
@@ -485,7 +485,7 @@
 		gpio_nreset = cs4271plat->gpio_nreset;
 
 	if (gpio_nreset >= 0)
-		if (gpio_request(gpio_nreset, "CS4271 Reset"))
+		if (devm_gpio_request(codec->dev, gpio_nreset, "CS4271 Reset"))
 			gpio_nreset = -EINVAL;
 	if (gpio_nreset >= 0) {
 		/* Reset codec */
@@ -535,15 +535,10 @@
 static int cs4271_remove(struct snd_soc_codec *codec)
 {
 	struct cs4271_private *cs4271 = snd_soc_codec_get_drvdata(codec);
-	int gpio_nreset;
 
-	gpio_nreset = cs4271->gpio_nreset;
-
-	if (gpio_is_valid(gpio_nreset)) {
+	if (gpio_is_valid(cs4271->gpio_nreset))
 		/* Set codec to the reset state */
-		gpio_set_value(gpio_nreset, 0);
-		gpio_free(gpio_nreset);
-	}
+		gpio_set_value(cs4271->gpio_nreset, 0);
 
 	return 0;
 };
diff --git a/sound/soc/codecs/cs42l52.c b/sound/soc/codecs/cs42l52.c
index 4d8db36..97a8105 100644
--- a/sound/soc/codecs/cs42l52.c
+++ b/sound/soc/codecs/cs42l52.c
@@ -773,7 +773,6 @@
 {
 	struct snd_soc_codec *codec = codec_dai->codec;
 	struct cs42l52_private *cs42l52 = snd_soc_codec_get_drvdata(codec);
-	int ret = 0;
 	u8 iface = 0;
 
 	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
@@ -822,7 +821,7 @@
 	case SND_SOC_DAIFMT_NB_IF:
 		break;
 	default:
-		ret = -EINVAL;
+		return -EINVAL;
 	}
 	cs42l52->config.format = iface;
 	snd_soc_write(codec, CS42L52_IFACE_CTL1, cs42l52->config.format);
diff --git a/sound/soc/codecs/wm5102.c b/sound/soc/codecs/wm5102.c
index 1722b58..7394e73 100644
--- a/sound/soc/codecs/wm5102.c
+++ b/sound/soc/codecs/wm5102.c
@@ -42,6 +42,556 @@
 static DECLARE_TLV_DB_SCALE(digital_tlv, -6400, 50, 0);
 static DECLARE_TLV_DB_SCALE(noise_tlv, 0, 600, 0);
 
+static const struct reg_default wm5102_sysclk_reva_patch[] = {
+	{ 0x3000, 0x2225 },
+	{ 0x3001, 0x3a03 },
+	{ 0x3002, 0x0225 },
+	{ 0x3003, 0x0801 },
+	{ 0x3004, 0x6249 },
+	{ 0x3005, 0x0c04 },
+	{ 0x3006, 0x0225 },
+	{ 0x3007, 0x5901 },
+	{ 0x3008, 0xe249 },
+	{ 0x3009, 0x030d },
+	{ 0x300a, 0x0249 },
+	{ 0x300b, 0x2c01 },
+	{ 0x300c, 0xe249 },
+	{ 0x300d, 0x4342 },
+	{ 0x300e, 0xe249 },
+	{ 0x300f, 0x73c0 },
+	{ 0x3010, 0x4249 },
+	{ 0x3011, 0x0c00 },
+	{ 0x3012, 0x0225 },
+	{ 0x3013, 0x1f01 },
+	{ 0x3014, 0x0225 },
+	{ 0x3015, 0x1e01 },
+	{ 0x3016, 0x0225 },
+	{ 0x3017, 0xfa00 },
+	{ 0x3018, 0x0000 },
+	{ 0x3019, 0xf000 },
+	{ 0x301a, 0x0000 },
+	{ 0x301b, 0xf000 },
+	{ 0x301c, 0x0000 },
+	{ 0x301d, 0xf000 },
+	{ 0x301e, 0x0000 },
+	{ 0x301f, 0xf000 },
+	{ 0x3020, 0x0000 },
+	{ 0x3021, 0xf000 },
+	{ 0x3022, 0x0000 },
+	{ 0x3023, 0xf000 },
+	{ 0x3024, 0x0000 },
+	{ 0x3025, 0xf000 },
+	{ 0x3026, 0x0000 },
+	{ 0x3027, 0xf000 },
+	{ 0x3028, 0x0000 },
+	{ 0x3029, 0xf000 },
+	{ 0x302a, 0x0000 },
+	{ 0x302b, 0xf000 },
+	{ 0x302c, 0x0000 },
+	{ 0x302d, 0xf000 },
+	{ 0x302e, 0x0000 },
+	{ 0x302f, 0xf000 },
+	{ 0x3030, 0x0225 },
+	{ 0x3031, 0x1a01 },
+	{ 0x3032, 0x0225 },
+	{ 0x3033, 0x1e00 },
+	{ 0x3034, 0x0225 },
+	{ 0x3035, 0x1f00 },
+	{ 0x3036, 0x6225 },
+	{ 0x3037, 0xf800 },
+	{ 0x3038, 0x0000 },
+	{ 0x3039, 0xf000 },
+	{ 0x303a, 0x0000 },
+	{ 0x303b, 0xf000 },
+	{ 0x303c, 0x0000 },
+	{ 0x303d, 0xf000 },
+	{ 0x303e, 0x0000 },
+	{ 0x303f, 0xf000 },
+	{ 0x3040, 0x2226 },
+	{ 0x3041, 0x3a03 },
+	{ 0x3042, 0x0226 },
+	{ 0x3043, 0x0801 },
+	{ 0x3044, 0x6249 },
+	{ 0x3045, 0x0c06 },
+	{ 0x3046, 0x0226 },
+	{ 0x3047, 0x5901 },
+	{ 0x3048, 0xe249 },
+	{ 0x3049, 0x030d },
+	{ 0x304a, 0x0249 },
+	{ 0x304b, 0x2c01 },
+	{ 0x304c, 0xe249 },
+	{ 0x304d, 0x4342 },
+	{ 0x304e, 0xe249 },
+	{ 0x304f, 0x73c0 },
+	{ 0x3050, 0x4249 },
+	{ 0x3051, 0x0c00 },
+	{ 0x3052, 0x0226 },
+	{ 0x3053, 0x1f01 },
+	{ 0x3054, 0x0226 },
+	{ 0x3055, 0x1e01 },
+	{ 0x3056, 0x0226 },
+	{ 0x3057, 0xfa00 },
+	{ 0x3058, 0x0000 },
+	{ 0x3059, 0xf000 },
+	{ 0x305a, 0x0000 },
+	{ 0x305b, 0xf000 },
+	{ 0x305c, 0x0000 },
+	{ 0x305d, 0xf000 },
+	{ 0x305e, 0x0000 },
+	{ 0x305f, 0xf000 },
+	{ 0x3060, 0x0000 },
+	{ 0x3061, 0xf000 },
+	{ 0x3062, 0x0000 },
+	{ 0x3063, 0xf000 },
+	{ 0x3064, 0x0000 },
+	{ 0x3065, 0xf000 },
+	{ 0x3066, 0x0000 },
+	{ 0x3067, 0xf000 },
+	{ 0x3068, 0x0000 },
+	{ 0x3069, 0xf000 },
+	{ 0x306a, 0x0000 },
+	{ 0x306b, 0xf000 },
+	{ 0x306c, 0x0000 },
+	{ 0x306d, 0xf000 },
+	{ 0x306e, 0x0000 },
+	{ 0x306f, 0xf000 },
+	{ 0x3070, 0x0226 },
+	{ 0x3071, 0x1a01 },
+	{ 0x3072, 0x0226 },
+	{ 0x3073, 0x1e00 },
+	{ 0x3074, 0x0226 },
+	{ 0x3075, 0x1f00 },
+	{ 0x3076, 0x6226 },
+	{ 0x3077, 0xf800 },
+	{ 0x3078, 0x0000 },
+	{ 0x3079, 0xf000 },
+	{ 0x307a, 0x0000 },
+	{ 0x307b, 0xf000 },
+	{ 0x307c, 0x0000 },
+	{ 0x307d, 0xf000 },
+	{ 0x307e, 0x0000 },
+	{ 0x307f, 0xf000 },
+	{ 0x3080, 0x2227 },
+	{ 0x3081, 0x3a03 },
+	{ 0x3082, 0x0227 },
+	{ 0x3083, 0x0801 },
+	{ 0x3084, 0x6255 },
+	{ 0x3085, 0x0c04 },
+	{ 0x3086, 0x0227 },
+	{ 0x3087, 0x5901 },
+	{ 0x3088, 0xe255 },
+	{ 0x3089, 0x030d },
+	{ 0x308a, 0x0255 },
+	{ 0x308b, 0x2c01 },
+	{ 0x308c, 0xe255 },
+	{ 0x308d, 0x4342 },
+	{ 0x308e, 0xe255 },
+	{ 0x308f, 0x73c0 },
+	{ 0x3090, 0x4255 },
+	{ 0x3091, 0x0c00 },
+	{ 0x3092, 0x0227 },
+	{ 0x3093, 0x1f01 },
+	{ 0x3094, 0x0227 },
+	{ 0x3095, 0x1e01 },
+	{ 0x3096, 0x0227 },
+	{ 0x3097, 0xfa00 },
+	{ 0x3098, 0x0000 },
+	{ 0x3099, 0xf000 },
+	{ 0x309a, 0x0000 },
+	{ 0x309b, 0xf000 },
+	{ 0x309c, 0x0000 },
+	{ 0x309d, 0xf000 },
+	{ 0x309e, 0x0000 },
+	{ 0x309f, 0xf000 },
+	{ 0x30a0, 0x0000 },
+	{ 0x30a1, 0xf000 },
+	{ 0x30a2, 0x0000 },
+	{ 0x30a3, 0xf000 },
+	{ 0x30a4, 0x0000 },
+	{ 0x30a5, 0xf000 },
+	{ 0x30a6, 0x0000 },
+	{ 0x30a7, 0xf000 },
+	{ 0x30a8, 0x0000 },
+	{ 0x30a9, 0xf000 },
+	{ 0x30aa, 0x0000 },
+	{ 0x30ab, 0xf000 },
+	{ 0x30ac, 0x0000 },
+	{ 0x30ad, 0xf000 },
+	{ 0x30ae, 0x0000 },
+	{ 0x30af, 0xf000 },
+	{ 0x30b0, 0x0227 },
+	{ 0x30b1, 0x1a01 },
+	{ 0x30b2, 0x0227 },
+	{ 0x30b3, 0x1e00 },
+	{ 0x30b4, 0x0227 },
+	{ 0x30b5, 0x1f00 },
+	{ 0x30b6, 0x6227 },
+	{ 0x30b7, 0xf800 },
+	{ 0x30b8, 0x0000 },
+	{ 0x30b9, 0xf000 },
+	{ 0x30ba, 0x0000 },
+	{ 0x30bb, 0xf000 },
+	{ 0x30bc, 0x0000 },
+	{ 0x30bd, 0xf000 },
+	{ 0x30be, 0x0000 },
+	{ 0x30bf, 0xf000 },
+	{ 0x30c0, 0x2228 },
+	{ 0x30c1, 0x3a03 },
+	{ 0x30c2, 0x0228 },
+	{ 0x30c3, 0x0801 },
+	{ 0x30c4, 0x6255 },
+	{ 0x30c5, 0x0c06 },
+	{ 0x30c6, 0x0228 },
+	{ 0x30c7, 0x5901 },
+	{ 0x30c8, 0xe255 },
+	{ 0x30c9, 0x030d },
+	{ 0x30ca, 0x0255 },
+	{ 0x30cb, 0x2c01 },
+	{ 0x30cc, 0xe255 },
+	{ 0x30cd, 0x4342 },
+	{ 0x30ce, 0xe255 },
+	{ 0x30cf, 0x73c0 },
+	{ 0x30d0, 0x4255 },
+	{ 0x30d1, 0x0c00 },
+	{ 0x30d2, 0x0228 },
+	{ 0x30d3, 0x1f01 },
+	{ 0x30d4, 0x0228 },
+	{ 0x30d5, 0x1e01 },
+	{ 0x30d6, 0x0228 },
+	{ 0x30d7, 0xfa00 },
+	{ 0x30d8, 0x0000 },
+	{ 0x30d9, 0xf000 },
+	{ 0x30da, 0x0000 },
+	{ 0x30db, 0xf000 },
+	{ 0x30dc, 0x0000 },
+	{ 0x30dd, 0xf000 },
+	{ 0x30de, 0x0000 },
+	{ 0x30df, 0xf000 },
+	{ 0x30e0, 0x0000 },
+	{ 0x30e1, 0xf000 },
+	{ 0x30e2, 0x0000 },
+	{ 0x30e3, 0xf000 },
+	{ 0x30e4, 0x0000 },
+	{ 0x30e5, 0xf000 },
+	{ 0x30e6, 0x0000 },
+	{ 0x30e7, 0xf000 },
+	{ 0x30e8, 0x0000 },
+	{ 0x30e9, 0xf000 },
+	{ 0x30ea, 0x0000 },
+	{ 0x30eb, 0xf000 },
+	{ 0x30ec, 0x0000 },
+	{ 0x30ed, 0xf000 },
+	{ 0x30ee, 0x0000 },
+	{ 0x30ef, 0xf000 },
+	{ 0x30f0, 0x0228 },
+	{ 0x30f1, 0x1a01 },
+	{ 0x30f2, 0x0228 },
+	{ 0x30f3, 0x1e00 },
+	{ 0x30f4, 0x0228 },
+	{ 0x30f5, 0x1f00 },
+	{ 0x30f6, 0x6228 },
+	{ 0x30f7, 0xf800 },
+	{ 0x30f8, 0x0000 },
+	{ 0x30f9, 0xf000 },
+	{ 0x30fa, 0x0000 },
+	{ 0x30fb, 0xf000 },
+	{ 0x30fc, 0x0000 },
+	{ 0x30fd, 0xf000 },
+	{ 0x30fe, 0x0000 },
+	{ 0x30ff, 0xf000 },
+	{ 0x3100, 0x222b },
+	{ 0x3101, 0x3a03 },
+	{ 0x3102, 0x222b },
+	{ 0x3103, 0x5803 },
+	{ 0x3104, 0xe26f },
+	{ 0x3105, 0x030d },
+	{ 0x3106, 0x626f },
+	{ 0x3107, 0x2c01 },
+	{ 0x3108, 0xe26f },
+	{ 0x3109, 0x4342 },
+	{ 0x310a, 0xe26f },
+	{ 0x310b, 0x73c0 },
+	{ 0x310c, 0x026f },
+	{ 0x310d, 0x0c00 },
+	{ 0x310e, 0x022b },
+	{ 0x310f, 0x1f01 },
+	{ 0x3110, 0x022b },
+	{ 0x3111, 0x1e01 },
+	{ 0x3112, 0x022b },
+	{ 0x3113, 0xfa00 },
+	{ 0x3114, 0x0000 },
+	{ 0x3115, 0xf000 },
+	{ 0x3116, 0x0000 },
+	{ 0x3117, 0xf000 },
+	{ 0x3118, 0x0000 },
+	{ 0x3119, 0xf000 },
+	{ 0x311a, 0x0000 },
+	{ 0x311b, 0xf000 },
+	{ 0x311c, 0x0000 },
+	{ 0x311d, 0xf000 },
+	{ 0x311e, 0x0000 },
+	{ 0x311f, 0xf000 },
+	{ 0x3120, 0x022b },
+	{ 0x3121, 0x0a01 },
+	{ 0x3122, 0x022b },
+	{ 0x3123, 0x1e00 },
+	{ 0x3124, 0x022b },
+	{ 0x3125, 0x1f00 },
+	{ 0x3126, 0x622b },
+	{ 0x3127, 0xf800 },
+	{ 0x3128, 0x0000 },
+	{ 0x3129, 0xf000 },
+	{ 0x312a, 0x0000 },
+	{ 0x312b, 0xf000 },
+	{ 0x312c, 0x0000 },
+	{ 0x312d, 0xf000 },
+	{ 0x312e, 0x0000 },
+	{ 0x312f, 0xf000 },
+	{ 0x3130, 0x0000 },
+	{ 0x3131, 0xf000 },
+	{ 0x3132, 0x0000 },
+	{ 0x3133, 0xf000 },
+	{ 0x3134, 0x0000 },
+	{ 0x3135, 0xf000 },
+	{ 0x3136, 0x0000 },
+	{ 0x3137, 0xf000 },
+	{ 0x3138, 0x0000 },
+	{ 0x3139, 0xf000 },
+	{ 0x313a, 0x0000 },
+	{ 0x313b, 0xf000 },
+	{ 0x313c, 0x0000 },
+	{ 0x313d, 0xf000 },
+	{ 0x313e, 0x0000 },
+	{ 0x313f, 0xf000 },
+	{ 0x3140, 0x0000 },
+	{ 0x3141, 0xf000 },
+	{ 0x3142, 0x0000 },
+	{ 0x3143, 0xf000 },
+	{ 0x3144, 0x0000 },
+	{ 0x3145, 0xf000 },
+	{ 0x3146, 0x0000 },
+	{ 0x3147, 0xf000 },
+	{ 0x3148, 0x0000 },
+	{ 0x3149, 0xf000 },
+	{ 0x314a, 0x0000 },
+	{ 0x314b, 0xf000 },
+	{ 0x314c, 0x0000 },
+	{ 0x314d, 0xf000 },
+	{ 0x314e, 0x0000 },
+	{ 0x314f, 0xf000 },
+	{ 0x3150, 0x0000 },
+	{ 0x3151, 0xf000 },
+	{ 0x3152, 0x0000 },
+	{ 0x3153, 0xf000 },
+	{ 0x3154, 0x0000 },
+	{ 0x3155, 0xf000 },
+	{ 0x3156, 0x0000 },
+	{ 0x3157, 0xf000 },
+	{ 0x3158, 0x0000 },
+	{ 0x3159, 0xf000 },
+	{ 0x315a, 0x0000 },
+	{ 0x315b, 0xf000 },
+	{ 0x315c, 0x0000 },
+	{ 0x315d, 0xf000 },
+	{ 0x315e, 0x0000 },
+	{ 0x315f, 0xf000 },
+	{ 0x3160, 0x0000 },
+	{ 0x3161, 0xf000 },
+	{ 0x3162, 0x0000 },
+	{ 0x3163, 0xf000 },
+	{ 0x3164, 0x0000 },
+	{ 0x3165, 0xf000 },
+	{ 0x3166, 0x0000 },
+	{ 0x3167, 0xf000 },
+	{ 0x3168, 0x0000 },
+	{ 0x3169, 0xf000 },
+	{ 0x316a, 0x0000 },
+	{ 0x316b, 0xf000 },
+	{ 0x316c, 0x0000 },
+	{ 0x316d, 0xf000 },
+	{ 0x316e, 0x0000 },
+	{ 0x316f, 0xf000 },
+	{ 0x3170, 0x0000 },
+	{ 0x3171, 0xf000 },
+	{ 0x3172, 0x0000 },
+	{ 0x3173, 0xf000 },
+	{ 0x3174, 0x0000 },
+	{ 0x3175, 0xf000 },
+	{ 0x3176, 0x0000 },
+	{ 0x3177, 0xf000 },
+	{ 0x3178, 0x0000 },
+	{ 0x3179, 0xf000 },
+	{ 0x317a, 0x0000 },
+	{ 0x317b, 0xf000 },
+	{ 0x317c, 0x0000 },
+	{ 0x317d, 0xf000 },
+	{ 0x317e, 0x0000 },
+	{ 0x317f, 0xf000 },
+	{ 0x3180, 0x2001 },
+	{ 0x3181, 0xf101 },
+	{ 0x3182, 0x0000 },
+	{ 0x3183, 0xf000 },
+	{ 0x3184, 0x0000 },
+	{ 0x3185, 0xf000 },
+	{ 0x3186, 0x0000 },
+	{ 0x3187, 0xf000 },
+	{ 0x3188, 0x0000 },
+	{ 0x3189, 0xf000 },
+	{ 0x318a, 0x0000 },
+	{ 0x318b, 0xf000 },
+	{ 0x318c, 0x0000 },
+	{ 0x318d, 0xf000 },
+	{ 0x318e, 0x0000 },
+	{ 0x318f, 0xf000 },
+	{ 0x3190, 0x0000 },
+	{ 0x3191, 0xf000 },
+	{ 0x3192, 0x0000 },
+	{ 0x3193, 0xf000 },
+	{ 0x3194, 0x0000 },
+	{ 0x3195, 0xf000 },
+	{ 0x3196, 0x0000 },
+	{ 0x3197, 0xf000 },
+	{ 0x3198, 0x0000 },
+	{ 0x3199, 0xf000 },
+	{ 0x319a, 0x0000 },
+	{ 0x319b, 0xf000 },
+	{ 0x319c, 0x0000 },
+	{ 0x319d, 0xf000 },
+	{ 0x319e, 0x0000 },
+	{ 0x319f, 0xf000 },
+	{ 0x31a0, 0x0000 },
+	{ 0x31a1, 0xf000 },
+	{ 0x31a2, 0x0000 },
+	{ 0x31a3, 0xf000 },
+	{ 0x31a4, 0x0000 },
+	{ 0x31a5, 0xf000 },
+	{ 0x31a6, 0x0000 },
+	{ 0x31a7, 0xf000 },
+	{ 0x31a8, 0x0000 },
+	{ 0x31a9, 0xf000 },
+	{ 0x31aa, 0x0000 },
+	{ 0x31ab, 0xf000 },
+	{ 0x31ac, 0x0000 },
+	{ 0x31ad, 0xf000 },
+	{ 0x31ae, 0x0000 },
+	{ 0x31af, 0xf000 },
+	{ 0x31b0, 0x0000 },
+	{ 0x31b1, 0xf000 },
+	{ 0x31b2, 0x0000 },
+	{ 0x31b3, 0xf000 },
+	{ 0x31b4, 0x0000 },
+	{ 0x31b5, 0xf000 },
+	{ 0x31b6, 0x0000 },
+	{ 0x31b7, 0xf000 },
+	{ 0x31b8, 0x0000 },
+	{ 0x31b9, 0xf000 },
+	{ 0x31ba, 0x0000 },
+	{ 0x31bb, 0xf000 },
+	{ 0x31bc, 0x0000 },
+	{ 0x31bd, 0xf000 },
+	{ 0x31be, 0x0000 },
+	{ 0x31bf, 0xf000 },
+	{ 0x31c0, 0x0000 },
+	{ 0x31c1, 0xf000 },
+	{ 0x31c2, 0x0000 },
+	{ 0x31c3, 0xf000 },
+	{ 0x31c4, 0x0000 },
+	{ 0x31c5, 0xf000 },
+	{ 0x31c6, 0x0000 },
+	{ 0x31c7, 0xf000 },
+	{ 0x31c8, 0x0000 },
+	{ 0x31c9, 0xf000 },
+	{ 0x31ca, 0x0000 },
+	{ 0x31cb, 0xf000 },
+	{ 0x31cc, 0x0000 },
+	{ 0x31cd, 0xf000 },
+	{ 0x31ce, 0x0000 },
+	{ 0x31cf, 0xf000 },
+	{ 0x31d0, 0x0000 },
+	{ 0x31d1, 0xf000 },
+	{ 0x31d2, 0x0000 },
+	{ 0x31d3, 0xf000 },
+	{ 0x31d4, 0x0000 },
+	{ 0x31d5, 0xf000 },
+	{ 0x31d6, 0x0000 },
+	{ 0x31d7, 0xf000 },
+	{ 0x31d8, 0x0000 },
+	{ 0x31d9, 0xf000 },
+	{ 0x31da, 0x0000 },
+	{ 0x31db, 0xf000 },
+	{ 0x31dc, 0x0000 },
+	{ 0x31dd, 0xf000 },
+	{ 0x31de, 0x0000 },
+	{ 0x31df, 0xf000 },
+	{ 0x31e0, 0x0000 },
+	{ 0x31e1, 0xf000 },
+	{ 0x31e2, 0x0000 },
+	{ 0x31e3, 0xf000 },
+	{ 0x31e4, 0x0000 },
+	{ 0x31e5, 0xf000 },
+	{ 0x31e6, 0x0000 },
+	{ 0x31e7, 0xf000 },
+	{ 0x31e8, 0x0000 },
+	{ 0x31e9, 0xf000 },
+	{ 0x31ea, 0x0000 },
+	{ 0x31eb, 0xf000 },
+	{ 0x31ec, 0x0000 },
+	{ 0x31ed, 0xf000 },
+	{ 0x31ee, 0x0000 },
+	{ 0x31ef, 0xf000 },
+	{ 0x31f0, 0x0000 },
+	{ 0x31f1, 0xf000 },
+	{ 0x31f2, 0x0000 },
+	{ 0x31f3, 0xf000 },
+	{ 0x31f4, 0x0000 },
+	{ 0x31f5, 0xf000 },
+	{ 0x31f6, 0x0000 },
+	{ 0x31f7, 0xf000 },
+	{ 0x31f8, 0x0000 },
+	{ 0x31f9, 0xf000 },
+	{ 0x31fa, 0x0000 },
+	{ 0x31fb, 0xf000 },
+	{ 0x31fc, 0x0000 },
+	{ 0x31fd, 0xf000 },
+	{ 0x31fe, 0x0000 },
+	{ 0x31ff, 0xf000 },
+	{ 0x024d, 0xff50 },
+	{ 0x0252, 0xff50 },
+	{ 0x0259, 0x0112 },
+	{ 0x025e, 0x0112 },
+};
+
+static int wm5102_sysclk_ev(struct snd_soc_dapm_widget *w,
+			    struct snd_kcontrol *kcontrol, int event)
+{
+	struct snd_soc_codec *codec = w->codec;
+	struct arizona *arizona = dev_get_drvdata(codec->dev);
+	struct regmap *regmap = codec->control_data;
+	const struct reg_default *patch = NULL;
+	int i, patch_size;
+
+	switch (arizona->rev) {
+	case 0:
+		patch = wm5102_sysclk_reva_patch;
+		patch_size = ARRAY_SIZE(wm5102_sysclk_reva_patch);
+		break;
+	}
+
+	switch (event) {
+	case SND_SOC_DAPM_POST_PMU:
+		if (patch)
+			for (i = 0; i < patch_size; i++)
+				regmap_write(regmap, patch[i].reg,
+					     patch[i].def);
+		break;
+
+	default:
+		break;
+	}
+
+	return 0;
+}
+
 static const struct snd_kcontrol_new wm5102_snd_controls[] = {
 SOC_SINGLE("IN1 High Performance Switch", ARIZONA_IN1L_CONTROL,
 	   ARIZONA_IN1_OSR_SHIFT, 1, 0),
@@ -297,7 +847,7 @@
 
 static const struct snd_soc_dapm_widget wm5102_dapm_widgets[] = {
 SND_SOC_DAPM_SUPPLY("SYSCLK", ARIZONA_SYSTEM_CLOCK_1, ARIZONA_SYSCLK_ENA_SHIFT,
-		    0, NULL, 0),
+		    0, wm5102_sysclk_ev, SND_SOC_DAPM_POST_PMU),
 SND_SOC_DAPM_SUPPLY("ASYNCCLK", ARIZONA_ASYNC_CLOCK_1,
 		    ARIZONA_ASYNC_CLK_ENA_SHIFT, 0, NULL, 0),
 SND_SOC_DAPM_SUPPLY("OPCLK", ARIZONA_OUTPUT_SYSTEM_CLOCK,
diff --git a/sound/soc/codecs/wm8978.c b/sound/soc/codecs/wm8978.c
index 5421fd9..4c0a8e4 100644
--- a/sound/soc/codecs/wm8978.c
+++ b/sound/soc/codecs/wm8978.c
@@ -782,7 +782,7 @@
 		wm8978->mclk_idx = -1;
 		f_sel = wm8978->f_mclk;
 	} else {
-		if (!wm8978->f_pllout) {
+		if (!wm8978->f_opclk) {
 			/* We only enter here, if OPCLK is not used */
 			int ret = wm8978_configure_pll(codec);
 			if (ret < 0)
diff --git a/sound/soc/kirkwood/kirkwood-dma.c b/sound/soc/kirkwood/kirkwood-dma.c
index b9f1659..2ba0814 100644
--- a/sound/soc/kirkwood/kirkwood-dma.c
+++ b/sound/soc/kirkwood/kirkwood-dma.c
@@ -71,7 +71,6 @@
 		printk(KERN_WARNING "%s: got err interrupt 0x%lx\n",
 				__func__, cause);
 		writel(cause, priv->io + KIRKWOOD_ERR_CAUSE);
-		return IRQ_HANDLED;
 	}
 
 	/* we've enabled only bytes interrupts ... */
@@ -178,7 +177,7 @@
 	}
 
 	dram = mv_mbus_dram_info();
-	addr = virt_to_phys(substream->dma_buffer.area);
+	addr = substream->dma_buffer.addr;
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
 		prdata->play_stream = substream;
 		kirkwood_dma_conf_mbus_windows(priv->io,
diff --git a/sound/soc/kirkwood/kirkwood-i2s.c b/sound/soc/kirkwood/kirkwood-i2s.c
index 542538d..1d5db48 100644
--- a/sound/soc/kirkwood/kirkwood-i2s.c
+++ b/sound/soc/kirkwood/kirkwood-i2s.c
@@ -95,7 +95,7 @@
 	do {
 		cpu_relax();
 		value = readl(io + KIRKWOOD_DCO_SPCR_STATUS);
-		value &= KIRKWOOD_DCO_SPCR_STATUS;
+		value &= KIRKWOOD_DCO_SPCR_STATUS_DCO_LOCK;
 	} while (value == 0);
 }
 
@@ -180,67 +180,72 @@
 				int cmd, struct snd_soc_dai *dai)
 {
 	struct kirkwood_dma_data *priv = snd_soc_dai_get_drvdata(dai);
-	unsigned long value;
+	uint32_t ctl, value;
 
-	/*
-	 * specs says KIRKWOOD_PLAYCTL must be read 2 times before
-	 * changing it. So read 1 time here and 1 later.
-	 */
-	value = readl(priv->io + KIRKWOOD_PLAYCTL);
+	ctl = readl(priv->io + KIRKWOOD_PLAYCTL);
+	if (ctl & KIRKWOOD_PLAYCTL_PAUSE) {
+		unsigned timeout = 5000;
+		/*
+		 * The Armada510 spec says that if we enter pause mode, the
+		 * busy bit must be read back as clear _twice_.  Make sure
+		 * we respect that otherwise we get DMA underruns.
+		 */
+		do {
+			value = ctl;
+			ctl = readl(priv->io + KIRKWOOD_PLAYCTL);
+			if (!((ctl | value) & KIRKWOOD_PLAYCTL_PLAY_BUSY))
+				break;
+			udelay(1);
+		} while (timeout--);
+
+		if ((ctl | value) & KIRKWOOD_PLAYCTL_PLAY_BUSY)
+			dev_notice(dai->dev, "timed out waiting for busy to deassert: %08x\n",
+				   ctl);
+	}
 
 	switch (cmd) {
 	case SNDRV_PCM_TRIGGER_START:
-		/* stop audio, enable interrupts */
-		value = readl(priv->io + KIRKWOOD_PLAYCTL);
-		value |= KIRKWOOD_PLAYCTL_PAUSE;
-		writel(value, priv->io + KIRKWOOD_PLAYCTL);
-
 		value = readl(priv->io + KIRKWOOD_INT_MASK);
 		value |= KIRKWOOD_INT_CAUSE_PLAY_BYTES;
 		writel(value, priv->io + KIRKWOOD_INT_MASK);
 
 		/* configure audio & enable i2s playback */
-		value = readl(priv->io + KIRKWOOD_PLAYCTL);
-		value &= ~KIRKWOOD_PLAYCTL_BURST_MASK;
-		value &= ~(KIRKWOOD_PLAYCTL_PAUSE | KIRKWOOD_PLAYCTL_I2S_MUTE
+		ctl &= ~KIRKWOOD_PLAYCTL_BURST_MASK;
+		ctl &= ~(KIRKWOOD_PLAYCTL_PAUSE | KIRKWOOD_PLAYCTL_I2S_MUTE
 				| KIRKWOOD_PLAYCTL_SPDIF_EN);
 
 		if (priv->burst == 32)
-			value |= KIRKWOOD_PLAYCTL_BURST_32;
+			ctl |= KIRKWOOD_PLAYCTL_BURST_32;
 		else
-			value |= KIRKWOOD_PLAYCTL_BURST_128;
-		value |= KIRKWOOD_PLAYCTL_I2S_EN;
-		writel(value, priv->io + KIRKWOOD_PLAYCTL);
+			ctl |= KIRKWOOD_PLAYCTL_BURST_128;
+		ctl |= KIRKWOOD_PLAYCTL_I2S_EN;
+		writel(ctl, priv->io + KIRKWOOD_PLAYCTL);
 		break;
 
 	case SNDRV_PCM_TRIGGER_STOP:
 		/* stop audio, disable interrupts */
-		value = readl(priv->io + KIRKWOOD_PLAYCTL);
-		value |= KIRKWOOD_PLAYCTL_PAUSE | KIRKWOOD_PLAYCTL_I2S_MUTE;
-		writel(value, priv->io + KIRKWOOD_PLAYCTL);
+		ctl |= KIRKWOOD_PLAYCTL_PAUSE | KIRKWOOD_PLAYCTL_I2S_MUTE;
+		writel(ctl, priv->io + KIRKWOOD_PLAYCTL);
 
 		value = readl(priv->io + KIRKWOOD_INT_MASK);
 		value &= ~KIRKWOOD_INT_CAUSE_PLAY_BYTES;
 		writel(value, priv->io + KIRKWOOD_INT_MASK);
 
 		/* disable all playbacks */
-		value = readl(priv->io + KIRKWOOD_PLAYCTL);
-		value &= ~(KIRKWOOD_PLAYCTL_I2S_EN | KIRKWOOD_PLAYCTL_SPDIF_EN);
-		writel(value, priv->io + KIRKWOOD_PLAYCTL);
+		ctl &= ~(KIRKWOOD_PLAYCTL_I2S_EN | KIRKWOOD_PLAYCTL_SPDIF_EN);
+		writel(ctl, priv->io + KIRKWOOD_PLAYCTL);
 		break;
 
 	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
 	case SNDRV_PCM_TRIGGER_SUSPEND:
-		value = readl(priv->io + KIRKWOOD_PLAYCTL);
-		value |= KIRKWOOD_PLAYCTL_PAUSE | KIRKWOOD_PLAYCTL_I2S_MUTE;
-		writel(value, priv->io + KIRKWOOD_PLAYCTL);
+		ctl |= KIRKWOOD_PLAYCTL_PAUSE | KIRKWOOD_PLAYCTL_I2S_MUTE;
+		writel(ctl, priv->io + KIRKWOOD_PLAYCTL);
 		break;
 
 	case SNDRV_PCM_TRIGGER_RESUME:
 	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
-		value = readl(priv->io + KIRKWOOD_PLAYCTL);
-		value &= ~(KIRKWOOD_PLAYCTL_PAUSE | KIRKWOOD_PLAYCTL_I2S_MUTE);
-		writel(value, priv->io + KIRKWOOD_PLAYCTL);
+		ctl &= ~(KIRKWOOD_PLAYCTL_PAUSE | KIRKWOOD_PLAYCTL_I2S_MUTE);
+		writel(ctl, priv->io + KIRKWOOD_PLAYCTL);
 		break;
 
 	default:
@@ -260,11 +265,6 @@
 
 	switch (cmd) {
 	case SNDRV_PCM_TRIGGER_START:
-		/* stop audio, enable interrupts */
-		value = readl(priv->io + KIRKWOOD_RECCTL);
-		value |= KIRKWOOD_RECCTL_PAUSE;
-		writel(value, priv->io + KIRKWOOD_RECCTL);
-
 		value = readl(priv->io + KIRKWOOD_INT_MASK);
 		value |= KIRKWOOD_INT_CAUSE_REC_BYTES;
 		writel(value, priv->io + KIRKWOOD_INT_MASK);
diff --git a/sound/soc/mxs/mxs-saif.c b/sound/soc/mxs/mxs-saif.c
index aa037b2..c294fbb 100644
--- a/sound/soc/mxs/mxs-saif.c
+++ b/sound/soc/mxs/mxs-saif.c
@@ -523,16 +523,24 @@
 
 		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
 			/*
-			 * write a data to saif data register to trigger
-			 * the transfer
+			 * write data to saif data register to trigger
+			 * the transfer.
+			 * For 24-bit format the 32-bit FIFO register stores
+			 * only one channel, so we need to write twice.
+			 * This is also safe for the other non 24-bit formats.
 			 */
 			__raw_writel(0, saif->base + SAIF_DATA);
+			__raw_writel(0, saif->base + SAIF_DATA);
 		} else {
 			/*
-			 * read a data from saif data register to trigger
-			 * the receive
+			 * read data from saif data register to trigger
+			 * the receive.
+			 * For 24-bit format the 32-bit FIFO register stores
+			 * only one channel, so we need to read twice.
+			 * This is also safe for the other non 24-bit formats.
 			 */
 			__raw_readl(saif->base + SAIF_DATA);
+			__raw_readl(saif->base + SAIF_DATA);
 		}
 
 		master_saif->ongoing = 1;
@@ -812,3 +820,4 @@
 MODULE_AUTHOR("Freescale Semiconductor, Inc.");
 MODULE_DESCRIPTION("MXS ASoC SAIF driver");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:mxs-saif");
diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig
index e7b8317..3c7c3a5 100644
--- a/sound/soc/samsung/Kconfig
+++ b/sound/soc/samsung/Kconfig
@@ -207,6 +207,8 @@
 	select SND_SOC_WM5102
 	select SND_SOC_WM5110
 	select SND_SOC_WM9081
+	select SND_SOC_WM0010
+	select SND_SOC_WM1250_EV1
 
 config SND_SOC_LOWLAND
 	tristate "Audio support for Wolfson Lowland"
diff --git a/sound/soc/samsung/bells.c b/sound/soc/samsung/bells.c
index b0d46d6..a2ca156 100644
--- a/sound/soc/samsung/bells.c
+++ b/sound/soc/samsung/bells.c
@@ -212,7 +212,7 @@
 	{
 		.name = "Sub",
 		.stream_name = "Sub",
-		.cpu_dai_name = "wm5110-aif3",
+		.cpu_dai_name = "wm5102-aif3",
 		.codec_dai_name = "wm9081-hifi",
 		.codec_name = "wm9081.1-006c",
 		.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF
diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
index d119862..10d21be 100644
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -2786,8 +2786,9 @@
 	val = (ucontrol->value.integer.value[0] + min) & mask;
 	val = val << shift;
 
-	if (snd_soc_update_bits_locked(codec, reg, val_mask, val))
-			return err;
+	err = snd_soc_update_bits_locked(codec, reg, val_mask, val);
+	if (err < 0)
+		return err;
 
 	if (snd_soc_volsw_is_stereo(mc)) {
 		val_mask = mask << rshift;
diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c
index d0a4be3..6e35bca 100644
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -3745,7 +3745,7 @@
 {
 	struct snd_soc_codec *codec;
 
-	list_for_each_entry(codec, &card->codec_dev_list, list) {
+	list_for_each_entry(codec, &card->codec_dev_list, card_list) {
 		soc_dapm_shutdown_codec(&codec->dapm);
 		if (codec->dapm.bias_level == SND_SOC_BIAS_STANDBY)
 			snd_soc_dapm_set_bias_level(&codec->dapm,
diff --git a/sound/usb/card.c b/sound/usb/card.c
index 282f0fc..dbf7999 100644
--- a/sound/usb/card.c
+++ b/sound/usb/card.c
@@ -559,9 +559,11 @@
 		return;
 
 	card = chip->card;
-	mutex_lock(&register_mutex);
 	down_write(&chip->shutdown_rwsem);
 	chip->shutdown = 1;
+	up_write(&chip->shutdown_rwsem);
+
+	mutex_lock(&register_mutex);
 	chip->num_interfaces--;
 	if (chip->num_interfaces <= 0) {
 		snd_card_disconnect(card);
@@ -582,11 +584,9 @@
 			snd_usb_mixer_disconnect(p);
 		}
 		usb_chip[chip->index] = NULL;
-		up_write(&chip->shutdown_rwsem);
 		mutex_unlock(&register_mutex);
 		snd_card_free_when_closed(card);
 	} else {
-		up_write(&chip->shutdown_rwsem);
 		mutex_unlock(&register_mutex);
 	}
 }
diff --git a/sound/usb/midi.c b/sound/usb/midi.c
index c83f614..eeefbce 100644
--- a/sound/usb/midi.c
+++ b/sound/usb/midi.c
@@ -148,6 +148,7 @@
 		struct snd_usb_midi_out_endpoint* ep;
 		struct snd_rawmidi_substream *substream;
 		int active;
+		bool autopm_reference;
 		uint8_t cable;		/* cable number << 4 */
 		uint8_t state;
 #define STATE_UNKNOWN	0
@@ -1076,7 +1077,8 @@
 		return -ENXIO;
 	}
 	err = usb_autopm_get_interface(umidi->iface);
-	if (err < 0)
+	port->autopm_reference = err >= 0;
+	if (err < 0 && err != -EACCES)
 		return -EIO;
 	substream->runtime->private_data = port;
 	port->state = STATE_UNKNOWN;
@@ -1087,9 +1089,11 @@
 static int snd_usbmidi_output_close(struct snd_rawmidi_substream *substream)
 {
 	struct snd_usb_midi* umidi = substream->rmidi->private_data;
+	struct usbmidi_out_port *port = substream->runtime->private_data;
 
 	substream_open(substream, 0);
-	usb_autopm_put_interface(umidi->iface);
+	if (port->autopm_reference)
+		usb_autopm_put_interface(umidi->iface);
 	return 0;
 }
 
diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c
index 5c12a3f..ef6fa24 100644
--- a/sound/usb/pcm.c
+++ b/sound/usb/pcm.c
@@ -459,7 +459,7 @@
 		return ret;
 
 	if (subs->sync_endpoint)
-		ret = snd_usb_endpoint_set_params(subs->data_endpoint,
+		ret = snd_usb_endpoint_set_params(subs->sync_endpoint,
 						  subs->pcm_format,
 						  subs->channels,
 						  subs->period_bytes,
diff --git a/tools/Makefile b/tools/Makefile
index 3ae4394..1f9a529 100644
--- a/tools/Makefile
+++ b/tools/Makefile
@@ -31,44 +31,44 @@
 	@echo '  clean: a summary clean target to clean _all_ folders'
 
 cpupower: FORCE
-	$(QUIET_SUBDIR0)power/$@/ $(QUIET_SUBDIR1)
+	$(call descend,power/$@)
 
 firewire lguest perf usb virtio vm: FORCE
-	$(QUIET_SUBDIR0)$@/ $(QUIET_SUBDIR1)
+	$(call descend,$@)
 
 selftests: FORCE
-	$(QUIET_SUBDIR0)testing/$@/ $(QUIET_SUBDIR1)
+	$(call descend,testing/$@)
 
 turbostat x86_energy_perf_policy: FORCE
-	$(QUIET_SUBDIR0)power/x86/$@/ $(QUIET_SUBDIR1)
+	$(call descend,power/x86/$@)
 
 cpupower_install:
-	$(QUIET_SUBDIR0)power/$(@:_install=)/ $(QUIET_SUBDIR1) install
+	$(call descend,power/$(@:_install=),install)
 
 firewire_install lguest_install perf_install usb_install virtio_install vm_install:
-	$(QUIET_SUBDIR0)$(@:_install=)/ $(QUIET_SUBDIR1) install
+	$(call descend,$(@:_install=),install)
 
 selftests_install:
-	$(QUIET_SUBDIR0)testing/$(@:_clean=)/ $(QUIET_SUBDIR1) install
+	$(call descend,testing/$(@:_clean=),install)
 
 turbostat_install x86_energy_perf_policy_install:
-	$(QUIET_SUBDIR0)power/x86/$(@:_install=)/ $(QUIET_SUBDIR1) install
+	$(call descend,power/x86/$(@:_install=),install)
 
 install: cpupower_install firewire_install lguest_install perf_install \
 		selftests_install turbostat_install usb_install virtio_install \
 		vm_install x86_energy_perf_policy_install
 
 cpupower_clean:
-	$(QUIET_SUBDIR0)power/cpupower/ $(QUIET_SUBDIR1) clean
+	$(call descend,power/cpupower,clean)
 
 firewire_clean lguest_clean perf_clean usb_clean virtio_clean vm_clean:
-	$(QUIET_SUBDIR0)$(@:_clean=)/ $(QUIET_SUBDIR1) clean
+	$(call descend,$(@:_clean=),clean)
 
 selftests_clean:
-	$(QUIET_SUBDIR0)testing/$(@:_clean=)/ $(QUIET_SUBDIR1) clean
+	$(call descend,testing/$(@:_clean=),clean)
 
 turbostat_clean x86_energy_perf_policy_clean:
-	$(QUIET_SUBDIR0)power/x86/$(@:_clean=)/ $(QUIET_SUBDIR1) clean
+	$(call descend,power/x86/$(@:_clean=),clean)
 
 clean: cpupower_clean firewire_clean lguest_clean perf_clean selftests_clean \
 		turbostat_clean usb_clean virtio_clean vm_clean \
diff --git a/tools/perf/Makefile b/tools/perf/Makefile
index 00deed4d..0a619af 100644
--- a/tools/perf/Makefile
+++ b/tools/perf/Makefile
@@ -169,7 +169,34 @@
 
 ### --- END CONFIGURATION SECTION ---
 
-BASIC_CFLAGS = -Iutil/include -Iarch/$(ARCH)/include -I$(OUTPUT)util -I$(TRACE_EVENT_DIR) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE
+ifeq ($(srctree),)
+srctree := $(patsubst %/,%,$(dir $(shell pwd)))
+srctree := $(patsubst %/,%,$(dir $(srctree)))
+#$(info Determined 'srctree' to be $(srctree))
+endif
+
+ifneq ($(objtree),)
+#$(info Determined 'objtree' to be $(objtree))
+endif
+
+ifneq ($(OUTPUT),)
+#$(info Determined 'OUTPUT' to be $(OUTPUT))
+endif
+
+BASIC_CFLAGS = \
+	-Iutil/include \
+	-Iarch/$(ARCH)/include \
+	$(if $(objtree),-I$(objtree)/arch/$(ARCH)/include/generated/uapi) \
+	-I$(srctree)/arch/$(ARCH)/include/uapi \
+	-I$(srctree)/arch/$(ARCH)/include \
+	$(if $(objtree),-I$(objtree)/include/generated/uapi) \
+	-I$(srctree)/include/uapi \
+	-I$(srctree)/include \
+	-I$(OUTPUT)util \
+	-Iutil \
+	-I. \
+	-I$(TRACE_EVENT_DIR) \
+	-D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE
 BASIC_LDFLAGS =
 
 # Guard against environment variables
diff --git a/tools/perf/arch/x86/include/perf_regs.h b/tools/perf/arch/x86/include/perf_regs.h
index 46fc9f1..7fcdcdb 100644
--- a/tools/perf/arch/x86/include/perf_regs.h
+++ b/tools/perf/arch/x86/include/perf_regs.h
@@ -3,7 +3,7 @@
 
 #include <stdlib.h>
 #include "../../util/types.h"
-#include "../../../../../arch/x86/include/asm/perf_regs.h"
+#include <asm/perf_regs.h>
 
 #ifndef ARCH_X86_64
 #define PERF_REGS_MASK ((1ULL << PERF_REG_X86_32_MAX) - 1)
diff --git a/tools/perf/builtin-kvm.c b/tools/perf/builtin-kvm.c
index 260abc5..283b439 100644
--- a/tools/perf/builtin-kvm.c
+++ b/tools/perf/builtin-kvm.c
@@ -22,9 +22,10 @@
 #include <pthread.h>
 #include <math.h>
 
-#include "../../arch/x86/include/asm/svm.h"
-#include "../../arch/x86/include/asm/vmx.h"
-#include "../../arch/x86/include/asm/kvm.h"
+#if defined(__i386__) || defined(__x86_64__)
+#include <asm/svm.h>
+#include <asm/vmx.h>
+#include <asm/kvm.h>
 
 struct event_key {
 	#define INVALID_KEY     (~0ULL)
@@ -58,7 +59,7 @@
 };
 
 
-struct perf_kvm;
+struct perf_kvm_stat;
 
 struct kvm_events_ops {
 	bool (*is_begin_event)(struct perf_evsel *evsel,
@@ -66,7 +67,7 @@
 			       struct event_key *key);
 	bool (*is_end_event)(struct perf_evsel *evsel,
 			     struct perf_sample *sample, struct event_key *key);
-	void (*decode_key)(struct perf_kvm *kvm, struct event_key *key,
+	void (*decode_key)(struct perf_kvm_stat *kvm, struct event_key *key,
 			   char decode[20]);
 	const char *name;
 };
@@ -79,7 +80,7 @@
 #define EVENTS_BITS		12
 #define EVENTS_CACHE_SIZE	(1UL << EVENTS_BITS)
 
-struct perf_kvm {
+struct perf_kvm_stat {
 	struct perf_tool    tool;
 	struct perf_session *session;
 
@@ -146,7 +147,7 @@
 	SVM_EXIT_REASONS
 };
 
-static const char *get_exit_reason(struct perf_kvm *kvm, u64 exit_code)
+static const char *get_exit_reason(struct perf_kvm_stat *kvm, u64 exit_code)
 {
 	int i = kvm->exit_reasons_size;
 	struct exit_reasons_table *tbl = kvm->exit_reasons;
@@ -162,7 +163,7 @@
 	return "UNKNOWN";
 }
 
-static void exit_event_decode_key(struct perf_kvm *kvm,
+static void exit_event_decode_key(struct perf_kvm_stat *kvm,
 				  struct event_key *key,
 				  char decode[20])
 {
@@ -228,7 +229,7 @@
 	return false;
 }
 
-static void mmio_event_decode_key(struct perf_kvm *kvm __maybe_unused,
+static void mmio_event_decode_key(struct perf_kvm_stat *kvm __maybe_unused,
 				  struct event_key *key,
 				  char decode[20])
 {
@@ -271,7 +272,7 @@
 	return kvm_entry_event(evsel);
 }
 
-static void ioport_event_decode_key(struct perf_kvm *kvm __maybe_unused,
+static void ioport_event_decode_key(struct perf_kvm_stat *kvm __maybe_unused,
 				    struct event_key *key,
 				    char decode[20])
 {
@@ -286,7 +287,7 @@
 	.name = "IO Port Access"
 };
 
-static bool register_kvm_events_ops(struct perf_kvm *kvm)
+static bool register_kvm_events_ops(struct perf_kvm_stat *kvm)
 {
 	bool ret = true;
 
@@ -311,7 +312,7 @@
 };
 
 
-static void init_kvm_event_record(struct perf_kvm *kvm)
+static void init_kvm_event_record(struct perf_kvm_stat *kvm)
 {
 	int i;
 
@@ -360,7 +361,7 @@
 	return event;
 }
 
-static struct kvm_event *find_create_kvm_event(struct perf_kvm *kvm,
+static struct kvm_event *find_create_kvm_event(struct perf_kvm_stat *kvm,
 					       struct event_key *key)
 {
 	struct kvm_event *event;
@@ -381,7 +382,7 @@
 	return event;
 }
 
-static bool handle_begin_event(struct perf_kvm *kvm,
+static bool handle_begin_event(struct perf_kvm_stat *kvm,
 			       struct vcpu_event_record *vcpu_record,
 			       struct event_key *key, u64 timestamp)
 {
@@ -425,7 +426,7 @@
 	return true;
 }
 
-static bool handle_end_event(struct perf_kvm *kvm,
+static bool handle_end_event(struct perf_kvm_stat *kvm,
 			     struct vcpu_event_record *vcpu_record,
 			     struct event_key *key,
 			     u64 timestamp)
@@ -486,7 +487,7 @@
 	return thread->priv;
 }
 
-static bool handle_kvm_event(struct perf_kvm *kvm,
+static bool handle_kvm_event(struct perf_kvm_stat *kvm,
 			     struct thread *thread,
 			     struct perf_evsel *evsel,
 			     struct perf_sample *sample)
@@ -541,7 +542,7 @@
 	{ NULL, NULL }
 };
 
-static bool select_key(struct perf_kvm *kvm)
+static bool select_key(struct perf_kvm_stat *kvm)
 {
 	int i;
 
@@ -577,7 +578,8 @@
 	rb_insert_color(&event->rb, result);
 }
 
-static void update_total_count(struct perf_kvm *kvm, struct kvm_event *event)
+static void
+update_total_count(struct perf_kvm_stat *kvm, struct kvm_event *event)
 {
 	int vcpu = kvm->trace_vcpu;
 
@@ -590,7 +592,7 @@
 	return !!get_event_count(event, vcpu);
 }
 
-static void sort_result(struct perf_kvm *kvm)
+static void sort_result(struct perf_kvm_stat *kvm)
 {
 	unsigned int i;
 	int vcpu = kvm->trace_vcpu;
@@ -627,7 +629,7 @@
 		pr_info("VCPU %d:\n\n", vcpu);
 }
 
-static void print_result(struct perf_kvm *kvm)
+static void print_result(struct perf_kvm_stat *kvm)
 {
 	char decode[20];
 	struct kvm_event *event;
@@ -670,7 +672,8 @@
 				struct machine *machine)
 {
 	struct thread *thread = machine__findnew_thread(machine, sample->tid);
-	struct perf_kvm *kvm = container_of(tool, struct perf_kvm, tool);
+	struct perf_kvm_stat *kvm = container_of(tool, struct perf_kvm_stat,
+						 tool);
 
 	if (thread == NULL) {
 		pr_debug("problem processing %d event, skipping it.\n",
@@ -701,7 +704,7 @@
 	return isa;
 }
 
-static int read_events(struct perf_kvm *kvm)
+static int read_events(struct perf_kvm_stat *kvm)
 {
 	int ret;
 
@@ -750,7 +753,7 @@
 	return true;
 }
 
-static int kvm_events_report_vcpu(struct perf_kvm *kvm)
+static int kvm_events_report_vcpu(struct perf_kvm_stat *kvm)
 {
 	int ret = -EINVAL;
 	int vcpu = kvm->trace_vcpu;
@@ -798,7 +801,8 @@
 		_p;			\
 	})
 
-static int kvm_events_record(struct perf_kvm *kvm, int argc, const char **argv)
+static int
+kvm_events_record(struct perf_kvm_stat *kvm, int argc, const char **argv)
 {
 	unsigned int rec_argc, i, j;
 	const char **rec_argv;
@@ -821,7 +825,8 @@
 	return cmd_record(i, rec_argv, NULL);
 }
 
-static int kvm_events_report(struct perf_kvm *kvm, int argc, const char **argv)
+static int
+kvm_events_report(struct perf_kvm_stat *kvm, int argc, const char **argv)
 {
 	const struct option kvm_events_report_options[] = {
 		OPT_STRING(0, "event", &kvm->report_event, "report event",
@@ -864,24 +869,37 @@
 	printf("\nOtherwise, it is the alias of 'perf stat':\n");
 }
 
-static int kvm_cmd_stat(struct perf_kvm *kvm, int argc, const char **argv)
+static int kvm_cmd_stat(const char *file_name, int argc, const char **argv)
 {
+	struct perf_kvm_stat kvm = {
+		.file_name = file_name,
+
+		.trace_vcpu	= -1,
+		.report_event	= "vmexit",
+		.sort_key	= "sample",
+
+		.exit_reasons = svm_exit_reasons,
+		.exit_reasons_size = ARRAY_SIZE(svm_exit_reasons),
+		.exit_reasons_isa = "SVM",
+	};
+
 	if (argc == 1) {
 		print_kvm_stat_usage();
 		goto perf_stat;
 	}
 
 	if (!strncmp(argv[1], "rec", 3))
-		return kvm_events_record(kvm, argc - 1, argv + 1);
+		return kvm_events_record(&kvm, argc - 1, argv + 1);
 
 	if (!strncmp(argv[1], "rep", 3))
-		return kvm_events_report(kvm, argc - 1 , argv + 1);
+		return kvm_events_report(&kvm, argc - 1 , argv + 1);
 
 perf_stat:
 	return cmd_stat(argc, argv, NULL);
 }
+#endif
 
-static int __cmd_record(struct perf_kvm *kvm, int argc, const char **argv)
+static int __cmd_record(const char *file_name, int argc, const char **argv)
 {
 	int rec_argc, i = 0, j;
 	const char **rec_argv;
@@ -890,7 +908,7 @@
 	rec_argv = calloc(rec_argc + 1, sizeof(char *));
 	rec_argv[i++] = strdup("record");
 	rec_argv[i++] = strdup("-o");
-	rec_argv[i++] = strdup(kvm->file_name);
+	rec_argv[i++] = strdup(file_name);
 	for (j = 1; j < argc; j++, i++)
 		rec_argv[i] = argv[j];
 
@@ -899,7 +917,7 @@
 	return cmd_record(i, rec_argv, NULL);
 }
 
-static int __cmd_report(struct perf_kvm *kvm, int argc, const char **argv)
+static int __cmd_report(const char *file_name, int argc, const char **argv)
 {
 	int rec_argc, i = 0, j;
 	const char **rec_argv;
@@ -908,7 +926,7 @@
 	rec_argv = calloc(rec_argc + 1, sizeof(char *));
 	rec_argv[i++] = strdup("report");
 	rec_argv[i++] = strdup("-i");
-	rec_argv[i++] = strdup(kvm->file_name);
+	rec_argv[i++] = strdup(file_name);
 	for (j = 1; j < argc; j++, i++)
 		rec_argv[i] = argv[j];
 
@@ -917,7 +935,8 @@
 	return cmd_report(i, rec_argv, NULL);
 }
 
-static int __cmd_buildid_list(struct perf_kvm *kvm, int argc, const char **argv)
+static int
+__cmd_buildid_list(const char *file_name, int argc, const char **argv)
 {
 	int rec_argc, i = 0, j;
 	const char **rec_argv;
@@ -926,7 +945,7 @@
 	rec_argv = calloc(rec_argc + 1, sizeof(char *));
 	rec_argv[i++] = strdup("buildid-list");
 	rec_argv[i++] = strdup("-i");
-	rec_argv[i++] = strdup(kvm->file_name);
+	rec_argv[i++] = strdup(file_name);
 	for (j = 1; j < argc; j++, i++)
 		rec_argv[i] = argv[j];
 
@@ -937,20 +956,12 @@
 
 int cmd_kvm(int argc, const char **argv, const char *prefix __maybe_unused)
 {
-	struct perf_kvm kvm = {
-		.trace_vcpu	= -1,
-		.report_event	= "vmexit",
-		.sort_key	= "sample",
-
-		.exit_reasons = svm_exit_reasons,
-		.exit_reasons_size = ARRAY_SIZE(svm_exit_reasons),
-		.exit_reasons_isa = "SVM",
-	};
+	const char *file_name;
 
 	const struct option kvm_options[] = {
-		OPT_STRING('i', "input", &kvm.file_name, "file",
+		OPT_STRING('i', "input", &file_name, "file",
 			   "Input file name"),
-		OPT_STRING('o', "output", &kvm.file_name, "file",
+		OPT_STRING('o', "output", &file_name, "file",
 			   "Output file name"),
 		OPT_BOOLEAN(0, "guest", &perf_guest,
 			    "Collect guest os data"),
@@ -985,32 +996,34 @@
 	if (!perf_host)
 		perf_guest = 1;
 
-	if (!kvm.file_name) {
+	if (!file_name) {
 		if (perf_host && !perf_guest)
-			kvm.file_name = strdup("perf.data.host");
+			file_name = strdup("perf.data.host");
 		else if (!perf_host && perf_guest)
-			kvm.file_name = strdup("perf.data.guest");
+			file_name = strdup("perf.data.guest");
 		else
-			kvm.file_name = strdup("perf.data.kvm");
+			file_name = strdup("perf.data.kvm");
 
-		if (!kvm.file_name) {
+		if (!file_name) {
 			pr_err("Failed to allocate memory for filename\n");
 			return -ENOMEM;
 		}
 	}
 
 	if (!strncmp(argv[0], "rec", 3))
-		return __cmd_record(&kvm, argc, argv);
+		return __cmd_record(file_name, argc, argv);
 	else if (!strncmp(argv[0], "rep", 3))
-		return __cmd_report(&kvm, argc, argv);
+		return __cmd_report(file_name, argc, argv);
 	else if (!strncmp(argv[0], "diff", 4))
 		return cmd_diff(argc, argv, NULL);
 	else if (!strncmp(argv[0], "top", 3))
 		return cmd_top(argc, argv, NULL);
 	else if (!strncmp(argv[0], "buildid-list", 12))
-		return __cmd_buildid_list(&kvm, argc, argv);
+		return __cmd_buildid_list(file_name, argc, argv);
+#if defined(__i386__) || defined(__x86_64__)
 	else if (!strncmp(argv[0], "stat", 4))
-		return kvm_cmd_stat(&kvm, argc, argv);
+		return kvm_cmd_stat(file_name, argc, argv);
+#endif
 	else
 		usage_with_options(kvm_usage, kvm_options);
 
diff --git a/tools/perf/builtin-test.c b/tools/perf/builtin-test.c
index 484f26c..5acd6e8 100644
--- a/tools/perf/builtin-test.c
+++ b/tools/perf/builtin-test.c
@@ -15,7 +15,7 @@
 #include "util/thread_map.h"
 #include "util/pmu.h"
 #include "event-parse.h"
-#include "../../include/linux/hw_breakpoint.h"
+#include <linux/hw_breakpoint.h>
 
 #include <sys/mman.h>
 
diff --git a/tools/perf/perf.h b/tools/perf/perf.h
index c50985e..238f923 100644
--- a/tools/perf/perf.h
+++ b/tools/perf/perf.h
@@ -5,8 +5,9 @@
 
 void get_term_dimensions(struct winsize *ws);
 
+#include <asm/unistd.h>
+
 #if defined(__i386__)
-#include "../../arch/x86/include/asm/unistd.h"
 #define rmb()		asm volatile("lock; addl $0,0(%%esp)" ::: "memory")
 #define cpu_relax()	asm volatile("rep; nop" ::: "memory");
 #define CPUINFO_PROC	"model name"
@@ -16,7 +17,6 @@
 #endif
 
 #if defined(__x86_64__)
-#include "../../arch/x86/include/asm/unistd.h"
 #define rmb()		asm volatile("lfence" ::: "memory")
 #define cpu_relax()	asm volatile("rep; nop" ::: "memory");
 #define CPUINFO_PROC	"model name"
@@ -26,20 +26,17 @@
 #endif
 
 #ifdef __powerpc__
-#include "../../arch/powerpc/include/asm/unistd.h"
 #define rmb()		asm volatile ("sync" ::: "memory")
 #define cpu_relax()	asm volatile ("" ::: "memory");
 #define CPUINFO_PROC	"cpu"
 #endif
 
 #ifdef __s390__
-#include "../../arch/s390/include/asm/unistd.h"
 #define rmb()		asm volatile("bcr 15,0" ::: "memory")
 #define cpu_relax()	asm volatile("" ::: "memory");
 #endif
 
 #ifdef __sh__
-#include "../../arch/sh/include/asm/unistd.h"
 #if defined(__SH4A__) || defined(__SH5__)
 # define rmb()		asm volatile("synco" ::: "memory")
 #else
@@ -50,35 +47,30 @@
 #endif
 
 #ifdef __hppa__
-#include "../../arch/parisc/include/asm/unistd.h"
 #define rmb()		asm volatile("" ::: "memory")
 #define cpu_relax()	asm volatile("" ::: "memory");
 #define CPUINFO_PROC	"cpu"
 #endif
 
 #ifdef __sparc__
-#include "../../arch/sparc/include/uapi/asm/unistd.h"
 #define rmb()		asm volatile("":::"memory")
 #define cpu_relax()	asm volatile("":::"memory")
 #define CPUINFO_PROC	"cpu"
 #endif
 
 #ifdef __alpha__
-#include "../../arch/alpha/include/asm/unistd.h"
 #define rmb()		asm volatile("mb" ::: "memory")
 #define cpu_relax()	asm volatile("" ::: "memory")
 #define CPUINFO_PROC	"cpu model"
 #endif
 
 #ifdef __ia64__
-#include "../../arch/ia64/include/asm/unistd.h"
 #define rmb()		asm volatile ("mf" ::: "memory")
 #define cpu_relax()	asm volatile ("hint @pause" ::: "memory")
 #define CPUINFO_PROC	"model name"
 #endif
 
 #ifdef __arm__
-#include "../../arch/arm/include/asm/unistd.h"
 /*
  * Use the __kuser_memory_barrier helper in the CPU helper page. See
  * arch/arm/kernel/entry-armv.S in the kernel source for details.
@@ -89,13 +81,11 @@
 #endif
 
 #ifdef __aarch64__
-#include "../../arch/arm64/include/asm/unistd.h"
 #define rmb()		asm volatile("dmb ld" ::: "memory")
 #define cpu_relax()	asm volatile("yield" ::: "memory")
 #endif
 
 #ifdef __mips__
-#include "../../arch/mips/include/asm/unistd.h"
 #define rmb()		asm volatile(					\
 				".set	mips2\n\t"			\
 				"sync\n\t"				\
@@ -112,7 +102,7 @@
 #include <sys/types.h>
 #include <sys/syscall.h>
 
-#include "../../include/uapi/linux/perf_event.h"
+#include <linux/perf_event.h>
 #include "util/types.h"
 #include <stdbool.h>
 
diff --git a/tools/perf/util/evsel.c b/tools/perf/util/evsel.c
index 618d411..d144d46 100644
--- a/tools/perf/util/evsel.c
+++ b/tools/perf/util/evsel.c
@@ -18,8 +18,8 @@
 #include "cpumap.h"
 #include "thread_map.h"
 #include "target.h"
-#include "../../../include/linux/hw_breakpoint.h"
-#include "../../../include/uapi/linux/perf_event.h"
+#include <linux/hw_breakpoint.h>
+#include <linux/perf_event.h>
 #include "perf_regs.h"
 
 #define FD(e, x, y) (*(int *)xyarray__entry(e->fd, x, y))
diff --git a/tools/perf/util/evsel.h b/tools/perf/util/evsel.h
index 6f94d6d..d99b476 100644
--- a/tools/perf/util/evsel.h
+++ b/tools/perf/util/evsel.h
@@ -3,7 +3,8 @@
 
 #include <linux/list.h>
 #include <stdbool.h>
-#include "../../../include/uapi/linux/perf_event.h"
+#include <stddef.h>
+#include <linux/perf_event.h>
 #include "types.h"
 #include "xyarray.h"
 #include "cgroup.h"
diff --git a/tools/perf/util/header.c b/tools/perf/util/header.c
index 7daad23..566b84c 100644
--- a/tools/perf/util/header.c
+++ b/tools/perf/util/header.c
@@ -1378,6 +1378,8 @@
 
 		str = tmp + 1;
 		fprintf(fp, "# node%u cpu list : %s\n", c, str);
+
+		str += strlen(str) + 1;
 	}
 	return;
 error:
diff --git a/tools/perf/util/header.h b/tools/perf/util/header.h
index 879d215..9bc0078 100644
--- a/tools/perf/util/header.h
+++ b/tools/perf/util/header.h
@@ -1,7 +1,7 @@
 #ifndef __PERF_HEADER_H
 #define __PERF_HEADER_H
 
-#include "../../../include/uapi/linux/perf_event.h"
+#include <linux/perf_event.h>
 #include <sys/types.h>
 #include <stdbool.h>
 #include "types.h"
diff --git a/tools/perf/util/parse-events-test.c b/tools/perf/util/parse-events-test.c
index 516ecd9..6ef213b 100644
--- a/tools/perf/util/parse-events-test.c
+++ b/tools/perf/util/parse-events-test.c
@@ -3,7 +3,7 @@
 #include "evsel.h"
 #include "evlist.h"
 #include "sysfs.h"
-#include "../../../include/linux/hw_breakpoint.h"
+#include <linux/hw_breakpoint.h>
 
 #define TEST_ASSERT_VAL(text, cond) \
 do { \
diff --git a/tools/perf/util/parse-events.c b/tools/perf/util/parse-events.c
index 75c7b0f..6b6d03e 100644
--- a/tools/perf/util/parse-events.c
+++ b/tools/perf/util/parse-events.c
@@ -1,4 +1,4 @@
-#include "../../../include/linux/hw_breakpoint.h"
+#include <linux/hw_breakpoint.h>
 #include "util.h"
 #include "../perf.h"
 #include "evlist.h"
diff --git a/tools/perf/util/parse-events.h b/tools/perf/util/parse-events.h
index 839230c..2820c40 100644
--- a/tools/perf/util/parse-events.h
+++ b/tools/perf/util/parse-events.h
@@ -7,7 +7,7 @@
 #include <linux/list.h>
 #include <stdbool.h>
 #include "types.h"
-#include "../../../include/uapi/linux/perf_event.h"
+#include <linux/perf_event.h>
 #include "types.h"
 
 struct list_head;
diff --git a/tools/perf/util/pmu.h b/tools/perf/util/pmu.h
index 39f3aba..fdeb8ac 100644
--- a/tools/perf/util/pmu.h
+++ b/tools/perf/util/pmu.h
@@ -2,7 +2,7 @@
 #define __PMU_H
 
 #include <linux/bitops.h>
-#include "../../../include/uapi/linux/perf_event.h"
+#include <linux/perf_event.h>
 
 enum {
 	PERF_PMU_FORMAT_VALUE_CONFIG,
diff --git a/tools/perf/util/session.h b/tools/perf/util/session.h
index dd64261..0eae00a 100644
--- a/tools/perf/util/session.h
+++ b/tools/perf/util/session.h
@@ -7,7 +7,7 @@
 #include "symbol.h"
 #include "thread.h"
 #include <linux/rbtree.h>
-#include "../../../include/uapi/linux/perf_event.h"
+#include <linux/perf_event.h>
 
 struct sample_queue;
 struct ip_callchain;
diff --git a/tools/perf/util/strbuf.c b/tools/perf/util/strbuf.c
index 2eeb51b..cfa9068 100644
--- a/tools/perf/util/strbuf.c
+++ b/tools/perf/util/strbuf.c
@@ -90,17 +90,17 @@
 	if (!strbuf_avail(sb))
 		strbuf_grow(sb, 64);
 	va_start(ap, fmt);
-	len = vscnprintf(sb->buf + sb->len, sb->alloc - sb->len, fmt, ap);
+	len = vsnprintf(sb->buf + sb->len, sb->alloc - sb->len, fmt, ap);
 	va_end(ap);
 	if (len < 0)
-		die("your vscnprintf is broken");
+		die("your vsnprintf is broken");
 	if (len > strbuf_avail(sb)) {
 		strbuf_grow(sb, len);
 		va_start(ap, fmt);
-		len = vscnprintf(sb->buf + sb->len, sb->alloc - sb->len, fmt, ap);
+		len = vsnprintf(sb->buf + sb->len, sb->alloc - sb->len, fmt, ap);
 		va_end(ap);
 		if (len > strbuf_avail(sb)) {
-			die("this should not happen, your snprintf is broken");
+			die("this should not happen, your vsnprintf is broken");
 		}
 	}
 	strbuf_setlen(sb, sb->len + len);
diff --git a/tools/power/cpupower/.gitignore b/tools/power/cpupower/.gitignore
index 8a83dd2..d42073f 100644
--- a/tools/power/cpupower/.gitignore
+++ b/tools/power/cpupower/.gitignore
@@ -20,3 +20,10 @@
 utils/cpufreq-aperf.o
 cpupower
 bench/cpufreq-bench
+debug/kernel/Module.symvers
+debug/i386/centrino-decode
+debug/i386/dump_psb
+debug/i386/intel_gsic
+debug/i386/powernow-k8-decode
+debug/x86_64/centrino-decode
+debug/x86_64/powernow-k8-decode
diff --git a/tools/power/cpupower/Makefile b/tools/power/cpupower/Makefile
index cf397bd..d875a74 100644
--- a/tools/power/cpupower/Makefile
+++ b/tools/power/cpupower/Makefile
@@ -253,7 +253,8 @@
 	 | xargs rm -f
 	-rm -f $(OUTPUT)cpupower
 	-rm -f $(OUTPUT)libcpupower.so*
-	-rm -rf $(OUTPUT)po/*.{gmo,pot}
+	-rm -rf $(OUTPUT)po/*.gmo
+	-rm -rf $(OUTPUT)po/*.pot
 	$(MAKE) -C bench O=$(OUTPUT) clean
 
 
diff --git a/tools/power/cpupower/debug/i386/Makefile b/tools/power/cpupower/debug/i386/Makefile
index 3ba158f..c05cc0a 100644
--- a/tools/power/cpupower/debug/i386/Makefile
+++ b/tools/power/cpupower/debug/i386/Makefile
@@ -26,7 +26,10 @@
 all: $(OUTPUT)centrino-decode $(OUTPUT)dump_psb $(OUTPUT)intel_gsic $(OUTPUT)powernow-k8-decode
 
 clean:
-	rm -rf $(OUTPUT){centrino-decode,dump_psb,intel_gsic,powernow-k8-decode}
+	rm -rf $(OUTPUT)centrino-decode
+	rm -rf $(OUTPUT)dump_psb
+	rm -rf $(OUTPUT)intel_gsic
+	rm -rf $(OUTPUT)powernow-k8-decode
 
 install:
 	$(INSTALL) -d $(DESTDIR)${bindir}
diff --git a/tools/power/cpupower/man/cpupower-monitor.1 b/tools/power/cpupower/man/cpupower-monitor.1
index 1141c20..e01c35d 100644
--- a/tools/power/cpupower/man/cpupower-monitor.1
+++ b/tools/power/cpupower/man/cpupower-monitor.1
@@ -7,11 +7,11 @@
 .RB "\-l"
 
 .B cpupower monitor
-.RB [ "\-m <mon1>," [ "<mon2>,..." ] ]
+.RB [ -c ] [ "\-m <mon1>," [ "<mon2>,..." ] ]
 .RB [ "\-i seconds" ]
 .br
 .B cpupower monitor
-.RB [ "\-m <mon1>," [ "<mon2>,..." ] ]
+.RB [ -c ][ "\-m <mon1>," [ "<mon2>,..." ] ]
 .RB command
 .br
 .SH DESCRIPTION
@@ -64,6 +64,17 @@
 Measure intervall.
 .RE
 .PP
+\-c
+.RS 4
+Schedule the process on every core before starting and ending measuring.
+This could be needed for the Idle_Stats monitor when no other MSR based
+monitor (has to be run on the core that is measured) is run in parallel.
+This is to wake up the processors from deeper sleep states and let the
+kernel re
+-account its cpuidle (C-state) information before reading the
+cpuidle timings from sysfs.
+.RE
+.PP
 command
 .RS 4
 Measure idle and frequency characteristics of an arbitrary command/workload.
diff --git a/tools/power/cpupower/utils/helpers/cpuid.c b/tools/power/cpupower/utils/helpers/cpuid.c
index 906895d..93b0aa7 100644
--- a/tools/power/cpupower/utils/helpers/cpuid.c
+++ b/tools/power/cpupower/utils/helpers/cpuid.c
@@ -158,6 +158,8 @@
 				cpu_info->caps |= CPUPOWER_CAP_HAS_TURBO_RATIO;
 			case 0x2A:	/* SNB */
 			case 0x2D:	/* SNB Xeon */
+			case 0x3A:	/* IVB */
+			case 0x3E:	/* IVB Xeon */
 				cpu_info->caps |= CPUPOWER_CAP_HAS_TURBO_RATIO;
 				cpu_info->caps |= CPUPOWER_CAP_IS_SNB;
 				break;
diff --git a/tools/power/cpupower/utils/helpers/helpers.h b/tools/power/cpupower/utils/helpers/helpers.h
index 2eb584c..aa9e954 100644
--- a/tools/power/cpupower/utils/helpers/helpers.h
+++ b/tools/power/cpupower/utils/helpers/helpers.h
@@ -92,6 +92,14 @@
 extern struct cpupower_cpu_info cpupower_cpu_info;
 /* cpuid and cpuinfo helpers  **************************/
 
+struct cpuid_core_info {
+	int pkg;
+	int core;
+	int cpu;
+
+	/* flags */
+	unsigned int is_online:1;
+};
 
 /* CPU topology/hierarchy parsing ******************/
 struct cpupower_topology {
@@ -101,18 +109,12 @@
 	unsigned int threads; /* per core */
 
 	/* Array gets mallocated with cores entries, holding per core info */
-	struct {
-		int pkg;
-		int core;
-		int cpu;
-
-		/* flags */
-		unsigned int is_online:1;
-	} *core_info;
+	struct cpuid_core_info *core_info;
 };
 
 extern int get_cpu_topology(struct cpupower_topology *cpu_top);
 extern void cpu_topology_release(struct cpupower_topology cpu_top);
+
 /* CPU topology/hierarchy parsing ******************/
 
 /* X86 ONLY ****************************************/
diff --git a/tools/power/cpupower/utils/helpers/sysfs.c b/tools/power/cpupower/utils/helpers/sysfs.c
index 96e28c1..38ab916 100644
--- a/tools/power/cpupower/utils/helpers/sysfs.c
+++ b/tools/power/cpupower/utils/helpers/sysfs.c
@@ -37,25 +37,6 @@
 	return (unsigned int) numread;
 }
 
-static unsigned int sysfs_write_file(const char *path,
-				     const char *value, size_t len)
-{
-	int fd;
-	ssize_t numwrite;
-
-	fd = open(path, O_WRONLY);
-	if (fd == -1)
-		return 0;
-
-	numwrite = write(fd, value, len);
-	if (numwrite < 1) {
-		close(fd);
-		return 0;
-	}
-	close(fd);
-	return (unsigned int) numwrite;
-}
-
 /*
  * Detect whether a CPU is online
  *
diff --git a/tools/power/cpupower/utils/helpers/topology.c b/tools/power/cpupower/utils/helpers/topology.c
index 4eae2c4..c13120a 100644
--- a/tools/power/cpupower/utils/helpers/topology.c
+++ b/tools/power/cpupower/utils/helpers/topology.c
@@ -20,9 +20,8 @@
 #include <helpers/sysfs.h>
 
 /* returns -1 on failure, 0 on success */
-int sysfs_topology_read_file(unsigned int cpu, const char *fname)
+static int sysfs_topology_read_file(unsigned int cpu, const char *fname, int *result)
 {
-	unsigned long value;
 	char linebuf[MAX_LINE_LEN];
 	char *endp;
 	char path[SYSFS_PATH_MAX];
@@ -31,20 +30,12 @@
 			 cpu, fname);
 	if (sysfs_read_file(path, linebuf, MAX_LINE_LEN) == 0)
 		return -1;
-	value = strtoul(linebuf, &endp, 0);
+	*result = strtol(linebuf, &endp, 0);
 	if (endp == linebuf || errno == ERANGE)
 		return -1;
-	return value;
+	return 0;
 }
 
-struct cpuid_core_info {
-	unsigned int pkg;
-	unsigned int thread;
-	unsigned int cpu;
-	/* flags */
-	unsigned int is_online:1;
-};
-
 static int __compare(const void *t1, const void *t2)
 {
 	struct cpuid_core_info *top1 = (struct cpuid_core_info *)t1;
@@ -53,9 +44,9 @@
 		return -1;
 	else if (top1->pkg > top2->pkg)
 		return 1;
-	else if (top1->thread < top2->thread)
+	else if (top1->core < top2->core)
 		return -1;
-	else if (top1->thread > top2->thread)
+	else if (top1->core > top2->core)
 		return 1;
 	else if (top1->cpu < top2->cpu)
 		return -1;
@@ -73,28 +64,42 @@
  */
 int get_cpu_topology(struct cpupower_topology *cpu_top)
 {
-	int cpu, cpus = sysconf(_SC_NPROCESSORS_CONF);
+	int cpu, last_pkg, cpus = sysconf(_SC_NPROCESSORS_CONF);
 
-	cpu_top->core_info = malloc(sizeof(struct cpupower_topology) * cpus);
+	cpu_top->core_info = malloc(sizeof(struct cpuid_core_info) * cpus);
 	if (cpu_top->core_info == NULL)
 		return -ENOMEM;
 	cpu_top->pkgs = cpu_top->cores = 0;
 	for (cpu = 0; cpu < cpus; cpu++) {
 		cpu_top->core_info[cpu].cpu = cpu;
 		cpu_top->core_info[cpu].is_online = sysfs_is_cpu_online(cpu);
-		cpu_top->core_info[cpu].pkg =
-			sysfs_topology_read_file(cpu, "physical_package_id");
-		if ((int)cpu_top->core_info[cpu].pkg != -1 &&
-		    cpu_top->core_info[cpu].pkg > cpu_top->pkgs)
-			cpu_top->pkgs = cpu_top->core_info[cpu].pkg;
-		cpu_top->core_info[cpu].core =
-			sysfs_topology_read_file(cpu, "core_id");
+		if(sysfs_topology_read_file(
+			cpu,
+			"physical_package_id",
+			&(cpu_top->core_info[cpu].pkg)) < 0)
+			return -1;
+		if(sysfs_topology_read_file(
+			cpu,
+			"core_id",
+			&(cpu_top->core_info[cpu].core)) < 0)
+			return -1;
 	}
-	cpu_top->pkgs++;
 
 	qsort(cpu_top->core_info, cpus, sizeof(struct cpuid_core_info),
 	      __compare);
 
+	/* Count the number of distinct pkgs values. This works
+	   because the primary sort of the core_info struct was just
+	   done by pkg value. */
+	last_pkg = cpu_top->core_info[0].pkg;
+	for(cpu = 1; cpu < cpus; cpu++) {
+		if(cpu_top->core_info[cpu].pkg != last_pkg) {
+			last_pkg = cpu_top->core_info[cpu].pkg;
+			cpu_top->pkgs++;
+		}
+	}
+	cpu_top->pkgs++;
+
 	/* Intel's cores count is not consecutively numbered, there may
 	 * be a core_id of 3, but none of 2. Assume there always is 0
 	 * Get amount of cores by counting duplicates in a package
diff --git a/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.c b/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.c
index 0d6571e..c4bae92 100644
--- a/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.c
+++ b/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.c
@@ -39,6 +39,7 @@
 static int interval = 1;
 static char *show_monitors_param;
 static struct cpupower_topology cpu_top;
+static unsigned int wake_cpus;
 
 /* ToDo: Document this in the manpage */
 static char range_abbr[RANGE_MAX] = { 'T', 'C', 'P', 'M', };
@@ -84,7 +85,7 @@
 void print_header(int topology_depth)
 {
 	int unsigned mon;
-	int state, need_len, pr_mon_len;
+	int state, need_len;
 	cstate_t s;
 	char buf[128] = "";
 	int percent_width = 4;
@@ -93,7 +94,6 @@
 	printf("%s|", buf);
 
 	for (mon = 0; mon < avail_monitors; mon++) {
-		pr_mon_len = 0;
 		need_len = monitors[mon]->hw_states_num * (percent_width + 3)
 			- 1;
 		if (mon != 0) {
@@ -315,16 +315,28 @@
 int do_interval_measure(int i)
 {
 	unsigned int num;
+	int cpu;
+
+	if (wake_cpus)
+		for (cpu = 0; cpu < cpu_count; cpu++)
+			bind_cpu(cpu);
 
 	for (num = 0; num < avail_monitors; num++) {
 		dprint("HW C-state residency monitor: %s - States: %d\n",
 		       monitors[num]->name, monitors[num]->hw_states_num);
 		monitors[num]->start();
 	}
+
 	sleep(i);
+
+	if (wake_cpus)
+		for (cpu = 0; cpu < cpu_count; cpu++)
+			bind_cpu(cpu);
+
 	for (num = 0; num < avail_monitors; num++)
 		monitors[num]->stop();
 
+
 	return 0;
 }
 
@@ -333,7 +345,7 @@
 	int opt;
 	progname = basename(argv[0]);
 
-	while ((opt = getopt(argc, argv, "+li:m:")) != -1) {
+	while ((opt = getopt(argc, argv, "+lci:m:")) != -1) {
 		switch (opt) {
 		case 'l':
 			if (mode)
@@ -352,6 +364,9 @@
 			mode = show;
 			show_monitors_param = optarg;
 			break;
+		case 'c':
+			wake_cpus = 1;
+			break;
 		default:
 			print_wrong_arg_exit();
 		}
diff --git a/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.h b/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.h
index 9312ee1..9e43f33 100644
--- a/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.h
+++ b/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.h
@@ -65,4 +65,21 @@
 				"could be inaccurate\n"), mes, ov);		\
 }
 
+
+/* Taken over from x86info project sources  -> return 0 on success */
+#include <sched.h>
+#include <sys/types.h>
+#include <unistd.h>
+static inline int bind_cpu(int cpu)
+{
+	cpu_set_t set;
+
+	if (sched_getaffinity(getpid(), sizeof(set), &set) == 0) {
+		CPU_ZERO(&set);
+		CPU_SET(cpu, &set);
+		return sched_setaffinity(getpid(), sizeof(set), &set);
+	}
+	return 1;
+}
+
 #endif /* __CPUIDLE_INFO_HW__ */
diff --git a/tools/power/cpupower/utils/idle_monitor/snb_idle.c b/tools/power/cpupower/utils/idle_monitor/snb_idle.c
index a1bc07cd..a99b43b 100644
--- a/tools/power/cpupower/utils/idle_monitor/snb_idle.c
+++ b/tools/power/cpupower/utils/idle_monitor/snb_idle.c
@@ -150,9 +150,15 @@
 	    || cpupower_cpu_info.family != 6)
 		return NULL;
 
-	if (cpupower_cpu_info.model != 0x2A
-	    && cpupower_cpu_info.model != 0x2D)
+	switch (cpupower_cpu_info.model) {
+	case 0x2A: /* SNB */
+	case 0x2D: /* SNB Xeon */
+	case 0x3A: /* IVB */
+	case 0x3E: /* IVB Xeon */
+		break;
+	default:
 		return NULL;
+	}
 
 	is_valid = calloc(cpu_count, sizeof(int));
 	for (num = 0; num < SNB_CSTATE_COUNT; num++) {
diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c
index 2655ae9..ea095ab 100644
--- a/tools/power/x86/turbostat/turbostat.c
+++ b/tools/power/x86/turbostat/turbostat.c
@@ -206,8 +206,10 @@
 	retval = pread(fd, msr, sizeof *msr, offset);
 	close(fd);
 
-	if (retval != sizeof *msr)
+	if (retval != sizeof *msr) {
+		fprintf(stderr, "%s offset 0x%zx read failed\n", pathname, offset);
 		return -1;
+	}
 
 	return 0;
 }
@@ -1101,7 +1103,9 @@
 
 restart:
 	retval = for_all_cpus(get_counters, EVEN_COUNTERS);
-	if (retval) {
+	if (retval < -1) {
+		exit(retval);
+	} else if (retval == -1) {
 		re_initialize();
 		goto restart;
 	}
@@ -1114,7 +1118,9 @@
 		}
 		sleep(interval_sec);
 		retval = for_all_cpus(get_counters, ODD_COUNTERS);
-		if (retval) {
+		if (retval < -1) {
+			exit(retval);
+		} else if (retval == -1) {
 			re_initialize();
 			goto restart;
 		}
@@ -1126,7 +1132,9 @@
 		flush_stdout();
 		sleep(interval_sec);
 		retval = for_all_cpus(get_counters, EVEN_COUNTERS);
-		if (retval) {
+		if (retval < -1) {
+			exit(retval);
+		} else if (retval == -1) {
 			re_initialize();
 			goto restart;
 		}
@@ -1545,8 +1553,11 @@
 int fork_it(char **argv)
 {
 	pid_t child_pid;
+	int status;
 
-	for_all_cpus(get_counters, EVEN_COUNTERS);
+	status = for_all_cpus(get_counters, EVEN_COUNTERS);
+	if (status)
+		exit(status);
 	/* clear affinity side-effect of get_counters() */
 	sched_setaffinity(0, cpu_present_setsize, cpu_present_set);
 	gettimeofday(&tv_even, (struct timezone *)NULL);
@@ -1556,7 +1567,6 @@
 		/* child */
 		execvp(argv[0], argv);
 	} else {
-		int status;
 
 		/* parent */
 		if (child_pid == -1) {
@@ -1568,7 +1578,7 @@
 		signal(SIGQUIT, SIG_IGN);
 		if (waitpid(child_pid, &status, 0) == -1) {
 			perror("wait");
-			exit(1);
+			exit(status);
 		}
 	}
 	/*
@@ -1585,7 +1595,7 @@
 
 	fprintf(stderr, "%.6f sec\n", tv_delta.tv_sec + tv_delta.tv_usec/1000000.0);
 
-	return 0;
+	return status;
 }
 
 void cmdline(int argc, char **argv)
@@ -1594,7 +1604,7 @@
 
 	progname = argv[0];
 
-	while ((opt = getopt(argc, argv, "+pPSvisc:sC:m:M:")) != -1) {
+	while ((opt = getopt(argc, argv, "+pPSvi:sc:sC:m:M:")) != -1) {
 		switch (opt) {
 		case 'p':
 			show_core_only++;
diff --git a/tools/scripts/Makefile.include b/tools/scripts/Makefile.include
index 96ce80a..2964b96 100644
--- a/tools/scripts/Makefile.include
+++ b/tools/scripts/Makefile.include
@@ -1,8 +1,11 @@
-ifeq ("$(origin O)", "command line")
+ifeq ($(origin O), command line)
 	dummy := $(if $(shell test -d $(O) || echo $(O)),$(error O=$(O) does not exist),)
 	ABSOLUTE_O := $(shell cd $(O) ; pwd)
-	OUTPUT := $(ABSOLUTE_O)/
+	OUTPUT := $(ABSOLUTE_O)/$(if $(subdir),$(subdir)/)
 	COMMAND_O := O=$(ABSOLUTE_O)
+ifeq ($(objtree),)
+	objtree := $(O)
+endif
 endif
 
 ifneq ($(OUTPUT),)
@@ -41,7 +44,16 @@
 NO_SUBDIR = :
 endif
 
-QUIET_SUBDIR0  = +$(MAKE) -C # space to separate -C and subdir
+#
+# Define a callable command for descending to a new directory
+#
+# Call by doing: $(call descend,directory[,target])
+#
+descend = \
+	+mkdir -p $(OUTPUT)$(1) && \
+	$(MAKE) $(COMMAND_O) subdir=$(if $(subdir),$(subdir)/$(1),$(1)) $(PRINT_DIR) -C $(1) $(2)
+
+QUIET_SUBDIR0  = +$(MAKE) $(COMMAND_O) -C # space to separate -C and subdir
 QUIET_SUBDIR1  =
 
 ifneq ($(findstring $(MAKEFLAGS),s),s)
@@ -56,5 +68,10 @@
 			 $(MAKE) $(PRINT_DIR) -C $$subdir
 	QUIET_FLEX     = @echo '   ' FLEX $@;
 	QUIET_BISON    = @echo '   ' BISON $@;
+
+	descend = \
+		@echo '   ' DESCEND $(1); \
+		mkdir -p $(OUTPUT)$(1) && \
+		$(MAKE) $(COMMAND_O) subdir=$(if $(subdir),$(subdir)/$(1),$(1)) $(PRINT_DIR) -C $(1) $(2)
 endif
 endif