| Micrel KS8995 SPI controlled Ethernet Switch families | |
| Required properties (according to spi-bus.txt): | |
| - compatible: either "micrel,ks8995", "micrel,ksz8864" or "micrel,ksz8795" | |
| Optional properties: | |
| - reset-gpios : phandle of gpio that will be used to reset chip during probe | |
| Example: | |
| spi-master { | |
| ... | |
| switch@0 { | |
| compatible = "micrel,ksz8795"; | |
| reg = <0>; | |
| spi-max-frequency = <50000000>; | |
| reset-gpios = <&gpio0 46 GPIO_ACTIVE_LOW>; | |
| }; | |
| }; |