powerpc/85xx: add P1020MBG-PC platform support
The p1020mbg-pc has the similar feature as the p1020rdb.
Therefore, p1020mbg-pc use the same platform file as the p1/p2 rdb board.
Overview of P1020MBG-PC platform:
- DDR3 2GB
- NOR flash 64MB
- I2C EEPROM 256Kb
- eTSEC1 (RGMII PHY) connected to VSC7385 L2 switch
- eTSEC2 (SGMII PHY)
- eTSEC3 (RGMII PHY)
- SDHC
- 2 USB ports
- 4 TDM ports
- PCIe (Lane1 to dual SATA controller)
Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
index 4976f4e..2c2a272 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
@@ -89,6 +89,7 @@
machine_device_initcall(p2020_rdb, mpc85xx_common_publish_devices);
machine_device_initcall(p2020_rdb_pc, mpc85xx_common_publish_devices);
+machine_device_initcall(p1020_mbg_pc, mpc85xx_common_publish_devices);
machine_device_initcall(p1020_rdb, mpc85xx_common_publish_devices);
machine_device_initcall(p1021_rdb_pc, mpc85xx_common_publish_devices);
machine_device_initcall(p1025_rdb, mpc85xx_common_publish_devices);
@@ -139,6 +140,13 @@
return of_flat_dt_is_compatible(root, "fsl,P1025RDB");
}
+static int __init p1020_mbg_pc_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ return of_flat_dt_is_compatible(root, "fsl,P1020MBG-PC");
+}
+
define_machine(p2020_rdb) {
.name = "P2020 RDB",
.probe = p2020_rdb_probe,
@@ -208,3 +216,17 @@
.calibrate_decr = generic_calibrate_decr,
.progress = udbg_progress,
};
+
+define_machine(p1020_mbg_pc) {
+ .name = "P1020 MBG-PC",
+ .probe = p1020_mbg_pc_probe,
+ .setup_arch = mpc85xx_rdb_setup_arch,
+ .init_IRQ = mpc85xx_rdb_pic_init,
+#ifdef CONFIG_PCI
+ .pcibios_fixup_bus = fsl_pcibios_fixup_bus,
+#endif
+ .get_irq = mpic_get_irq,
+ .restart = fsl_rstcr_restart,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};