OMAP4: PMIC: Add support for twl6030 codec
In order to have TWL6030 CODEC driver as a platform driver, codec data
should be passed through twl_platform_data structure.
For twl6030 audio codec, the following data may be passed:
- audpwron_gpio: gpio line used to power-up/down the codec. A low-to-high
transition powers codec up. Setting audpwron_gpio to a negative value
means that codec will use manual power sequence instead of automatic
sequence
- naudint_irq: irq line for audio interrupt. twl6030 drives NAUDINT line
to low when an interrupt (codec ready, plug insertion/removal, etc) is
detected
However, codec driver can operate if any or none of them are passed.
Signed-off-by: Misael Lopez Cruz <x0052729@ti.com>
Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com>
Signed-off-by: Jorge Eduardo Candelaria <jorge.candelaria@ti.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c
index 2a76065..19a930d 100644
--- a/drivers/mfd/twl-core.c
+++ b/drivers/mfd/twl-core.c
@@ -115,7 +115,8 @@
#define twl_has_watchdog() false
#endif
-#if defined(CONFIG_TWL4030_CODEC) || defined(CONFIG_TWL4030_CODEC_MODULE)
+#if defined(CONFIG_TWL4030_CODEC) || defined(CONFIG_TWL4030_CODEC_MODULE) ||\
+ defined(CONFIG_SND_SOC_TWL6030) || defined(CONFIG_SND_SOC_TWL6030_MODULE)
#define twl_has_codec() true
#else
#define twl_has_codec() false
@@ -711,8 +712,19 @@
return PTR_ERR(child);
}
- if (twl_has_codec() && pdata->codec) {
- child = add_child(1, "twl4030_codec",
+ if (twl_has_codec() && pdata->codec && twl_class_is_4030()) {
+ sub_chip_id = twl_map[TWL_MODULE_AUDIO_VOICE].sid;
+ child = add_child(sub_chip_id, "twl4030_codec",
+ pdata->codec, sizeof(*pdata->codec),
+ false, 0, 0);
+ if (IS_ERR(child))
+ return PTR_ERR(child);
+ }
+
+ /* Phoenix*/
+ if (twl_has_codec() && pdata->codec && twl_class_is_6030()) {
+ sub_chip_id = twl_map[TWL_MODULE_AUDIO_VOICE].sid;
+ child = add_child(sub_chip_id, "twl6030_codec",
pdata->codec, sizeof(*pdata->codec),
false, 0, 0);
if (IS_ERR(child))
