| #include "qcom-apq8064-v2.0.dtsi" |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/input/input.h> |
| #include <dt-bindings/mfd/qcom-rpm.h> |
| #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> |
| |
| / { |
| model = "Sony Xperia Z"; |
| compatible = "sony,xperia-yuga", "qcom,apq8064"; |
| |
| aliases { |
| serial0 = &gsbi5_serial; |
| }; |
| |
| chosen { |
| stdout-path = "serial0:115200n8"; |
| }; |
| |
| gpio-keys { |
| compatible = "gpio-keys"; |
| input-name = "gpio-keys"; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&gpio_keys_pin_a>; |
| |
| camera-focus { |
| label = "camera_focus"; |
| gpios = <&pm8921_gpio 3 GPIO_ACTIVE_LOW>; |
| linux,input-type = <1>; |
| linux,code = <KEY_CAMERA_FOCUS>; |
| }; |
| |
| camera-snapshot { |
| label = "camera_snapshot"; |
| gpios = <&pm8921_gpio 4 GPIO_ACTIVE_LOW>; |
| linux,input-type = <1>; |
| linux,code = <KEY_CAMERA>; |
| }; |
| |
| volume-down { |
| label = "volume_down"; |
| gpios = <&pm8921_gpio 29 GPIO_ACTIVE_LOW>; |
| linux,input-type = <1>; |
| linux,code = <KEY_VOLUMEDOWN>; |
| }; |
| |
| volume-up { |
| label = "volume_up"; |
| gpios = <&pm8921_gpio 35 GPIO_ACTIVE_LOW>; |
| linux,input-type = <1>; |
| linux,code = <KEY_VOLUMEUP>; |
| }; |
| }; |
| |
| soc { |
| pinctrl@800000 { |
| gsbi5_uart_pin_a: gsbi5-uart-pin-active { |
| rx { |
| pins = "gpio52"; |
| function = "gsbi5"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| tx { |
| pins = "gpio51"; |
| function = "gsbi5"; |
| drive-strength = <4>; |
| bias-disable; |
| }; |
| }; |
| |
| |
| sdcc3_cd_pin_a: sdcc3-cd-pin-active { |
| pins = "gpio26"; |
| function = "gpio"; |
| |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| }; |
| |
| |
| rpm@108000 { |
| regulators { |
| vin_l1_l2_l12_l18-supply = <&pm8921_s4>; |
| vin_lvs_1_3_6-supply = <&pm8921_s4>; |
| vin_lvs_4_5_7-supply = <&pm8921_s4>; |
| vin_ncp-supply = <&pm8921_l6>; |
| vin_lvs2-supply = <&pm8921_s4>; |
| vin_l24-supply = <&pm8921_s1>; |
| vin_l25-supply = <&pm8921_s1>; |
| vin_l27-supply = <&pm8921_s7>; |
| vin_l28-supply = <&pm8921_s7>; |
| |
| /* Buck SMPS */ |
| s1 { |
| regulator-always-on; |
| regulator-min-microvolt = <1225000>; |
| regulator-max-microvolt = <1225000>; |
| qcom,switch-mode-frequency = <3200000>; |
| bias-pull-down; |
| }; |
| |
| s2 { |
| regulator-min-microvolt = <1300000>; |
| regulator-max-microvolt = <1300000>; |
| qcom,switch-mode-frequency = <1600000>; |
| bias-pull-down; |
| }; |
| |
| s3 { |
| regulator-min-microvolt = <500000>; |
| regulator-max-microvolt = <1150000>; |
| qcom,switch-mode-frequency = <4800000>; |
| bias-pull-down; |
| }; |
| |
| s4 { |
| regulator-always-on; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| qcom,switch-mode-frequency = <1600000>; |
| bias-pull-down; |
| qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>; |
| }; |
| |
| s7 { |
| regulator-min-microvolt = <1300000>; |
| regulator-max-microvolt = <1300000>; |
| qcom,switch-mode-frequency = <3200000>; |
| }; |
| |
| s8 { |
| regulator-min-microvolt = <2200000>; |
| regulator-max-microvolt = <2200000>; |
| qcom,switch-mode-frequency = <1600000>; |
| }; |
| |
| /* PMOS LDO */ |
| l1 { |
| regulator-always-on; |
| regulator-min-microvolt = <1100000>; |
| regulator-max-microvolt = <1100000>; |
| bias-pull-down; |
| }; |
| |
| l2 { |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| bias-pull-down; |
| }; |
| |
| l3 { |
| regulator-min-microvolt = <3075000>; |
| regulator-max-microvolt = <3075000>; |
| bias-pull-down; |
| }; |
| |
| l4 { |
| regulator-always-on; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| bias-pull-down; |
| }; |
| |
| l5 { |
| regulator-min-microvolt = <2950000>; |
| regulator-max-microvolt = <2950000>; |
| bias-pull-down; |
| }; |
| |
| l6 { |
| regulator-min-microvolt = <2950000>; |
| regulator-max-microvolt = <2950000>; |
| bias-pull-down; |
| }; |
| |
| l7 { |
| regulator-min-microvolt = <1850000>; |
| regulator-max-microvolt = <2950000>; |
| bias-pull-down; |
| }; |
| |
| l8 { |
| regulator-min-microvolt = <2800000>; |
| regulator-max-microvolt = <2800000>; |
| bias-pull-down; |
| }; |
| |
| l9 { |
| regulator-min-microvolt = <3000000>; |
| regulator-max-microvolt = <3000000>; |
| bias-pull-down; |
| }; |
| |
| l10 { |
| regulator-min-microvolt = <2900000>; |
| regulator-max-microvolt = <2900000>; |
| bias-pull-down; |
| }; |
| |
| l11 { |
| regulator-min-microvolt = <3000000>; |
| regulator-max-microvolt = <3000000>; |
| bias-pull-down; |
| }; |
| |
| l12 { |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| bias-pull-down; |
| }; |
| |
| l14 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| bias-pull-down; |
| }; |
| |
| l15 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <2950000>; |
| bias-pull-down; |
| }; |
| |
| l16 { |
| regulator-min-microvolt = <2800000>; |
| regulator-max-microvolt = <2800000>; |
| bias-pull-down; |
| }; |
| |
| l17 { |
| regulator-min-microvolt = <2000000>; |
| regulator-max-microvolt = <2000000>; |
| bias-pull-down; |
| }; |
| |
| l18 { |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| bias-pull-down; |
| }; |
| |
| l21 { |
| regulator-min-microvolt = <1050000>; |
| regulator-max-microvolt = <1050000>; |
| bias-pull-down; |
| }; |
| |
| l22 { |
| regulator-min-microvolt = <2600000>; |
| regulator-max-microvolt = <2600000>; |
| bias-pull-down; |
| }; |
| |
| l23 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| bias-pull-down; |
| }; |
| |
| l24 { |
| regulator-min-microvolt = <750000>; |
| regulator-max-microvolt = <1150000>; |
| bias-pull-down; |
| }; |
| |
| l25 { |
| regulator-always-on; |
| regulator-min-microvolt = <1250000>; |
| regulator-max-microvolt = <1250000>; |
| bias-pull-down; |
| }; |
| |
| l27 { |
| regulator-min-microvolt = <1100000>; |
| regulator-max-microvolt = <1100000>; |
| }; |
| |
| l28 { |
| regulator-min-microvolt = <1050000>; |
| regulator-max-microvolt = <1050000>; |
| bias-pull-down; |
| }; |
| |
| l29 { |
| regulator-min-microvolt = <2000000>; |
| regulator-max-microvolt = <2000000>; |
| bias-pull-down; |
| }; |
| |
| /* Low Voltage Switch */ |
| lvs1 { |
| bias-pull-down; |
| }; |
| |
| lvs2 { |
| bias-pull-down; |
| }; |
| |
| lvs3 { |
| bias-pull-down; |
| }; |
| |
| lvs4 { |
| bias-pull-down; |
| }; |
| |
| lvs5 { |
| bias-pull-down; |
| }; |
| |
| lvs6 { |
| bias-pull-down; |
| }; |
| |
| lvs7 { |
| bias-pull-down; |
| }; |
| |
| usb-switch {}; |
| |
| hdmi-switch {}; |
| |
| ncp { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| qcom,switch-mode-frequency = <1600000>; |
| }; |
| }; |
| }; |
| |
| qcom,ssbi@500000 { |
| pmic@0 { |
| gpio@150 { |
| gpio_keys_pin_a: gpio-keys-pin-active { |
| pins = "gpio3", "gpio4", "gpio29", "gpio35"; |
| function = "normal"; |
| |
| bias-pull-up; |
| drive-push-pull; |
| input-enable; |
| power-source = <2>; |
| qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; |
| qcom,pull-up-strength = <0>; |
| }; |
| }; |
| }; |
| }; |
| |
| usb@12500000 { |
| status = "okay"; |
| dr_mode = "otg"; |
| ulpi { |
| phy { |
| v3p3-supply = <&pm8921_l3>; |
| v1p8-supply = <&pm8921_l4>; |
| }; |
| }; |
| }; |
| |
| gsbi@1a200000 { |
| status = "ok"; |
| qcom,mode = <GSBI_PROT_I2C_UART>; |
| |
| serial@1a240000 { |
| status = "ok"; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&gsbi5_uart_pin_a>; |
| }; |
| }; |
| |
| amba { |
| sdcc1: sdcc@12400000 { |
| status = "okay"; |
| |
| vmmc-supply = <&pm8921_l5>; |
| vqmmc-supply = <&pm8921_s4>; |
| }; |
| |
| sdcc3: sdcc@12180000 { |
| status = "okay"; |
| |
| vmmc-supply = <&pm8921_l6>; |
| cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&sdcc3_pins>, <&sdcc3_cd_pin_a>; |
| }; |
| }; |
| |
| riva-pil@3204000 { |
| status = "okay"; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&riva_wlan_pin_a>, <&riva_bt_pin_a>, <&riva_fm_pin_a>; |
| }; |
| }; |
| }; |
