/*
 *  linux/arch/arm/kernel/bios32.c
 *
 *  PCI bios-type initialisation for PCI machines
 *
 *  Bits taken from various places.
 */
#include <linux/export.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/io.h>

#include <asm/mach-types.h>
#include <asm/mach/map.h>
#include <asm/mach/pci.h>

static int debug_pci;

/*
 * We can't use pci_get_device() here since we are
 * called from interrupt context.
 */
static void pcibios_bus_report_status(struct pci_bus *bus, u_int status_mask, int warn)
{
	struct pci_dev *dev;

	list_for_each_entry(dev, &bus->devices, bus_list) {
		u16 status;

		/*
		 * ignore host bridge - we handle
		 * that separately
		 */
		if (dev->bus->number == 0 && dev->devfn == 0)
			continue;

		pci_read_config_word(dev, PCI_STATUS, &status);
		if (status == 0xffff)
			continue;

		if ((status & status_mask) == 0)
			continue;

		/* clear the status errors */
		pci_write_config_word(dev, PCI_STATUS, status & status_mask);

		if (warn)
			printk("(%s: %04X) ", pci_name(dev), status);
	}

	list_for_each_entry(dev, &bus->devices, bus_list)
		if (dev->subordinate)
			pcibios_bus_report_status(dev->subordinate, status_mask, warn);
}

void pcibios_report_status(u_int status_mask, int warn)
{
	struct pci_bus *bus;

	list_for_each_entry(bus, &pci_root_buses, node)
		pcibios_bus_report_status(bus, status_mask, warn);
}

/*
 * We don't use this to fix the device, but initialisation of it.
 * It's not the correct use for this, but it works.
 * Note that the arbiter/ISA bridge appears to be buggy, specifically in
 * the following area:
 * 1. park on CPU
 * 2. ISA bridge ping-pong
 * 3. ISA bridge master handling of target RETRY
 *
 * Bug 3 is responsible for the sound DMA grinding to a halt.  We now
 * live with bug 2.
 */
static void pci_fixup_83c553(struct pci_dev *dev)
{
	/*
	 * Set memory region to start at address 0, and enable IO
	 */
	pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, PCI_BASE_ADDRESS_SPACE_MEMORY);
	pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_IO);

	dev->resource[0].end -= dev->resource[0].start;
	dev->resource[0].start = 0;

	/*
	 * All memory requests from ISA to be channelled to PCI
	 */
	pci_write_config_byte(dev, 0x48, 0xff);

	/*
	 * Enable ping-pong on bus master to ISA bridge transactions.
	 * This improves the sound DMA substantially.  The fixed
	 * priority arbiter also helps (see below).
	 */
	pci_write_config_byte(dev, 0x42, 0x01);

	/*
	 * Enable PCI retry
	 */
	pci_write_config_byte(dev, 0x40, 0x22);

	/*
	 * We used to set the arbiter to "park on last master" (bit
	 * 1 set), but unfortunately the CyberPro does not park the
	 * bus.  We must therefore park on CPU.  Unfortunately, this
	 * may trigger yet another bug in the 553.
	 */
	pci_write_config_byte(dev, 0x83, 0x02);

	/*
	 * Make the ISA DMA request lowest priority, and disable
	 * rotating priorities completely.
	 */
	pci_write_config_byte(dev, 0x80, 0x11);
	pci_write_config_byte(dev, 0x81, 0x00);

	/*
	 * Route INTA input to IRQ 11, and set IRQ11 to be level
	 * sensitive.
	 */
	pci_write_config_word(dev, 0x44, 0xb000);
	outb(0x08, 0x4d1);
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_WINBOND, PCI_DEVICE_ID_WINBOND_83C553, pci_fixup_83c553);

static void pci_fixup_unassign(struct pci_dev *dev)
{
	dev->resource[0].end -= dev->resource[0].start;
	dev->resource[0].start = 0;
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_WINBOND2, PCI_DEVICE_ID_WINBOND2_89C940F, pci_fixup_unassign);

/*
 * Prevent the PCI layer from seeing the resources allocated to this device
 * if it is the host bridge by marking it as such.  These resources are of
 * no consequence to the PCI layer (they are handled elsewhere).
 */
static void pci_fixup_dec21285(struct pci_dev *dev)
{
	int i;

	if (dev->devfn == 0) {
		dev->class &= 0xff;
		dev->class |= PCI_CLASS_BRIDGE_HOST << 8;
		for (i = 0; i < PCI_NUM_RESOURCES; i++) {
			dev->resource[i].start = 0;
			dev->resource[i].end   = 0;
			dev->resource[i].flags = 0;
		}
	}
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_21285, pci_fixup_dec21285);

/*
 * PCI IDE controllers use non-standard I/O port decoding, respect it.
 */
static void pci_fixup_ide_bases(struct pci_dev *dev)
{
	struct resource *r;
	int i;

	if ((dev->class >> 8) != PCI_CLASS_STORAGE_IDE)
		return;

	for (i = 0; i < PCI_NUM_RESOURCES; i++) {
		r = dev->resource + i;
		if ((r->start & ~0x80) == 0x374) {
			r->start |= 2;
			r->end = r->start;
		}
	}
}
DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases);

/*
 * Put the DEC21142 to sleep
 */
static void pci_fixup_dec21142(struct pci_dev *dev)
{
	pci_write_config_dword(dev, 0x40, 0x80000000);
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_21142, pci_fixup_dec21142);

/*
 * The CY82C693 needs some rather major fixups to ensure that it does
 * the right thing.  Idea from the Alpha people, with a few additions.
 *
 * We ensure that the IDE base registers are set to 1f0/3f4 for the
 * primary bus, and 170/374 for the secondary bus.  Also, hide them
 * from the PCI subsystem view as well so we won't try to perform
 * our own auto-configuration on them.
 *
 * In addition, we ensure that the PCI IDE interrupts are routed to
 * IRQ 14 and IRQ 15 respectively.
 *
 * The above gets us to a point where the IDE on this device is
 * functional.  However, The CY82C693U _does not work_ in bus
 * master mode without locking the PCI bus solid.
 */
static void pci_fixup_cy82c693(struct pci_dev *dev)
{
	if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE) {
		u32 base0, base1;

		if (dev->class & 0x80) {	/* primary */
			base0 = 0x1f0;
			base1 = 0x3f4;
		} else {			/* secondary */
			base0 = 0x170;
			base1 = 0x374;
		}

		pci_write_config_dword(dev, PCI_BASE_ADDRESS_0,
				       base0 | PCI_BASE_ADDRESS_SPACE_IO);
		pci_write_config_dword(dev, PCI_BASE_ADDRESS_1,
				       base1 | PCI_BASE_ADDRESS_SPACE_IO);

		dev->resource[0].start = 0;
		dev->resource[0].end   = 0;
		dev->resource[0].flags = 0;

		dev->resource[1].start = 0;
		dev->resource[1].end   = 0;
		dev->resource[1].flags = 0;
	} else if (PCI_FUNC(dev->devfn) == 0) {
		/*
		 * Setup IDE IRQ routing.
		 */
		pci_write_config_byte(dev, 0x4b, 14);
		pci_write_config_byte(dev, 0x4c, 15);

		/*
		 * Disable FREQACK handshake, enable USB.
		 */
		pci_write_config_byte(dev, 0x4d, 0x41);

		/*
		 * Enable PCI retry, and PCI post-write buffer.
		 */
		pci_write_config_byte(dev, 0x44, 0x17);

		/*
		 * Enable ISA master and DMA post write buffering.
		 */
		pci_write_config_byte(dev, 0x45, 0x03);
	}
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693, pci_fixup_cy82c693);

static void pci_fixup_it8152(struct pci_dev *dev)
{
	int i;
	/* fixup for ITE 8152 devices */
	/* FIXME: add defines for class 0x68000 and 0x80103 */
	if ((dev->class >> 8) == PCI_CLASS_BRIDGE_HOST ||
	    dev->class == 0x68000 ||
	    dev->class == 0x80103) {
		for (i = 0; i < PCI_NUM_RESOURCES; i++) {
			dev->resource[i].start = 0;
			dev->resource[i].end   = 0;
			dev->resource[i].flags = 0;
		}
	}
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_8152, pci_fixup_it8152);

/*
 * If the bus contains any of these devices, then we must not turn on
 * parity checking of any kind.  Currently this is CyberPro 20x0 only.
 */
static inline int pdev_bad_for_parity(struct pci_dev *dev)
{
	return ((dev->vendor == PCI_VENDOR_ID_INTERG &&
		 (dev->device == PCI_DEVICE_ID_INTERG_2000 ||
		  dev->device == PCI_DEVICE_ID_INTERG_2010)) ||
		(dev->vendor == PCI_VENDOR_ID_ITE &&
		 dev->device == PCI_DEVICE_ID_ITE_8152));

}

/*
 * pcibios_fixup_bus - Called after each bus is probed,
 * but before its children are examined.
 */
void pcibios_fixup_bus(struct pci_bus *bus)
{
	struct pci_dev *dev;
	u16 features = PCI_COMMAND_SERR | PCI_COMMAND_PARITY | PCI_COMMAND_FAST_BACK;

	/*
	 * Walk the devices on this bus, working out what we can
	 * and can't support.
	 */
	list_for_each_entry(dev, &bus->devices, bus_list) {
		u16 status;

		pci_read_config_word(dev, PCI_STATUS, &status);

		/*
		 * If any device on this bus does not support fast back
		 * to back transfers, then the bus as a whole is not able
		 * to support them.  Having fast back to back transfers
		 * on saves us one PCI cycle per transaction.
		 */
		if (!(status & PCI_STATUS_FAST_BACK))
			features &= ~PCI_COMMAND_FAST_BACK;

		if (pdev_bad_for_parity(dev))
			features &= ~(PCI_COMMAND_SERR | PCI_COMMAND_PARITY);

		switch (dev->class >> 8) {
		case PCI_CLASS_BRIDGE_PCI:
			pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &status);
			status |= PCI_BRIDGE_CTL_PARITY|PCI_BRIDGE_CTL_MASTER_ABORT;
			status &= ~(PCI_BRIDGE_CTL_BUS_RESET|PCI_BRIDGE_CTL_FAST_BACK);
			pci_write_config_word(dev, PCI_BRIDGE_CONTROL, status);
			break;

		case PCI_CLASS_BRIDGE_CARDBUS:
			pci_read_config_word(dev, PCI_CB_BRIDGE_CONTROL, &status);
			status |= PCI_CB_BRIDGE_CTL_PARITY|PCI_CB_BRIDGE_CTL_MASTER_ABORT;
			pci_write_config_word(dev, PCI_CB_BRIDGE_CONTROL, status);
			break;
		}
	}

	/*
	 * Now walk the devices again, this time setting them up.
	 */
	list_for_each_entry(dev, &bus->devices, bus_list) {
		u16 cmd;

		pci_read_config_word(dev, PCI_COMMAND, &cmd);
		cmd |= features;
		pci_write_config_word(dev, PCI_COMMAND, cmd);

		pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE,
				      L1_CACHE_BYTES >> 2);
	}

	/*
	 * Propagate the flags to the PCI bridge.
	 */
	if (bus->self && bus->self->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
		if (features & PCI_COMMAND_FAST_BACK)
			bus->bridge_ctl |= PCI_BRIDGE_CTL_FAST_BACK;
		if (features & PCI_COMMAND_PARITY)
			bus->bridge_ctl |= PCI_BRIDGE_CTL_PARITY;
	}

	/*
	 * Report what we did for this bus
	 */
	pr_info("PCI: bus%d: Fast back to back transfers %sabled\n",
		bus->number, (features & PCI_COMMAND_FAST_BACK) ? "en" : "dis");
}
EXPORT_SYMBOL(pcibios_fixup_bus);

/*
 * Swizzle the device pin each time we cross a bridge.  If a platform does
 * not provide a swizzle function, we perform the standard PCI swizzling.
 *
 * The default swizzling walks up the bus tree one level at a time, applying
 * the standard swizzle function at each step, stopping when it finds the PCI
 * root bus.  This will return the slot number of the bridge device on the
 * root bus and the interrupt pin on that device which should correspond
 * with the downstream device interrupt.
 *
 * Platforms may override this, in which case the slot and pin returned
 * depend entirely on the platform code.  However, please note that the
 * PCI standard swizzle is implemented on plug-in cards and Cardbus based
 * PCI extenders, so it can not be ignored.
 */
static u8 pcibios_swizzle(struct pci_dev *dev, u8 *pin)
{
	struct pci_sys_data *sys = dev->sysdata;
	int slot, oldpin = *pin;

	if (sys->swizzle)
		slot = sys->swizzle(dev, pin);
	else
		slot = pci_common_swizzle(dev, pin);

	if (debug_pci)
		printk("PCI: %s swizzling pin %d => pin %d slot %d\n",
			pci_name(dev), oldpin, *pin, slot);

	return slot;
}

/*
 * Map a slot/pin to an IRQ.
 */
static int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
	struct pci_sys_data *sys = dev->sysdata;
	int irq = -1;

	if (sys->map_irq)
		irq = sys->map_irq(dev, slot, pin);

	if (debug_pci)
		printk("PCI: %s mapping slot %d pin %d => irq %d\n",
			pci_name(dev), slot, pin, irq);

	return irq;
}

static int pcibios_init_resource(int busnr, struct pci_sys_data *sys,
				 int io_optional)
{
	int ret;
	struct resource_entry *window;

	if (list_empty(&sys->resources)) {
		pci_add_resource_offset(&sys->resources,
			 &iomem_resource, sys->mem_offset);
	}

	/*
	 * If a platform says I/O port support is optional, we don't add
	 * the default I/O space.  The platform is responsible for adding
	 * any I/O space it needs.
	 */
	if (io_optional)
		return 0;

	resource_list_for_each_entry(window, &sys->resources)
		if (resource_type(window->res) == IORESOURCE_IO)
			return 0;

	sys->io_res.start = (busnr * SZ_64K) ?  : pcibios_min_io;
	sys->io_res.end = (busnr + 1) * SZ_64K - 1;
	sys->io_res.flags = IORESOURCE_IO;
	sys->io_res.name = sys->io_res_name;
	sprintf(sys->io_res_name, "PCI%d I/O", busnr);

	ret = request_resource(&ioport_resource, &sys->io_res);
	if (ret) {
		pr_err("PCI: unable to allocate I/O port region (%d)\n", ret);
		return ret;
	}
	pci_add_resource_offset(&sys->resources, &sys->io_res,
				sys->io_offset);

	return 0;
}

static void pcibios_init_hw(struct device *parent, struct hw_pci *hw,
			    struct list_head *head)
{
	struct pci_sys_data *sys = NULL;
	int ret;
	int nr, busnr;

	for (nr = busnr = 0; nr < hw->nr_controllers; nr++) {
		struct pci_host_bridge *bridge;

		bridge = pci_alloc_host_bridge(sizeof(struct pci_sys_data));
		if (WARN(!bridge, "PCI: unable to allocate bridge!"))
			break;

		sys = pci_host_bridge_priv(bridge);

		sys->busnr   = busnr;
		sys->swizzle = hw->swizzle;
		sys->map_irq = hw->map_irq;
		INIT_LIST_HEAD(&sys->resources);

		if (hw->private_data)
			sys->private_data = hw->private_data[nr];

		ret = hw->setup(nr, sys);

		if (ret > 0) {

			ret = pcibios_init_resource(nr, sys, hw->io_optional);
			if (ret)  {
				pci_free_host_bridge(bridge);
				break;
			}

			bridge->map_irq = pcibios_map_irq;
			bridge->swizzle_irq = pcibios_swizzle;

			if (hw->scan)
				ret = hw->scan(nr, bridge);
			else {
				list_splice_init(&sys->resources,
						 &bridge->windows);
				bridge->dev.parent = parent;
				bridge->sysdata = sys;
				bridge->busnr = sys->busnr;
				bridge->ops = hw->ops;
				bridge->msi = hw->msi_ctrl;
				bridge->align_resource =
						hw->align_resource;

				ret = pci_scan_root_bus_bridge(bridge);
			}

			if (WARN(ret < 0, "PCI: unable to scan bus!")) {
				pci_free_host_bridge(bridge);
				break;
			}

			sys->bus = bridge->bus;

			busnr = sys->bus->busn_res.end + 1;

			list_add(&sys->node, head);
		} else {
			pci_free_host_bridge(bridge);
			if (ret < 0)
				break;
		}
	}
}

void pci_common_init_dev(struct device *parent, struct hw_pci *hw)
{
	struct pci_sys_data *sys;
	LIST_HEAD(head);

	pci_add_flags(PCI_REASSIGN_ALL_RSRC);
	if (hw->preinit)
		hw->preinit();
	pcibios_init_hw(parent, hw, &head);
	if (hw->postinit)
		hw->postinit();

	list_for_each_entry(sys, &head, node) {
		struct pci_bus *bus = sys->bus;

		/*
		 * We insert PCI resources into the iomem_resource and
		 * ioport_resource trees in either pci_bus_claim_resources()
		 * or pci_bus_assign_resources().
		 */
		if (pci_has_flag(PCI_PROBE_ONLY)) {
			pci_bus_claim_resources(bus);
		} else {
			struct pci_bus *child;

			pci_bus_size_bridges(bus);
			pci_bus_assign_resources(bus);

			list_for_each_entry(child, &bus->children, node)
				pcie_bus_configure_settings(child);
		}

		pci_bus_add_devices(bus);
	}
}

#ifndef CONFIG_PCI_HOST_ITE8152
void pcibios_set_master(struct pci_dev *dev)
{
	/* No special bus mastering setup handling */
}
#endif

char * __init pcibios_setup(char *str)
{
	if (!strcmp(str, "debug")) {
		debug_pci = 1;
		return NULL;
	}
	return str;
}

/*
 * From arch/i386/kernel/pci-i386.c:
 *
 * We need to avoid collisions with `mirrored' VGA ports
 * and other strange ISA hardware, so we always want the
 * addresses to be allocated in the 0x000-0x0ff region
 * modulo 0x400.
 *
 * Why? Because some silly external IO cards only decode
 * the low 10 bits of the IO address. The 0x00-0xff region
 * is reserved for motherboard devices that decode all 16
 * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
 * but we want to try to avoid allocating at 0x2900-0x2bff
 * which might be mirrored at 0x0100-0x03ff..
 */
resource_size_t pcibios_align_resource(void *data, const struct resource *res,
				resource_size_t size, resource_size_t align)
{
	struct pci_dev *dev = data;
	resource_size_t start = res->start;
	struct pci_host_bridge *host_bridge;

	if (res->flags & IORESOURCE_IO && start & 0x300)
		start = (start + 0x3ff) & ~0x3ff;

	start = (start + align - 1) & ~(align - 1);

	host_bridge = pci_find_host_bridge(dev->bus);

	if (host_bridge->align_resource)
		return host_bridge->align_resource(dev, res,
				start, size, align);

	return start;
}

void __init pci_map_io_early(unsigned long pfn)
{
	struct map_desc pci_io_desc = {
		.virtual	= PCI_IO_VIRT_BASE,
		.type		= MT_DEVICE,
		.length		= SZ_64K,
	};

	pci_io_desc.pfn = pfn;
	iotable_init(&pci_io_desc, 1);
}