arch/alpha/kernel/sys_noritake.c - arm/linux - Git at Google

 // SPDX-License-Identifier: GPL-2.0
 /*
  *	linux/arch/alpha/kernel/sys_noritake.c
  *
  *	Copyright (C) 1995 David A Rusling
  *	Copyright (C) 1996 Jay A Estabrook
  *	Copyright (C) 1998, 1999 Richard Henderson
  *
  * Code supporting the NORITAKE (AlphaServer 1000A),
  * CORELLE (AlphaServer 800), and ALCOR Primo (AlphaStation 600A).
  */

 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/mm.h>
 #include <linux/sched.h>
 #include <linux/pci.h>
 #include <linux/init.h>
 #include <linux/bitops.h>

 #include <asm/ptrace.h>
 #include <asm/mce.h>
 #include <asm/dma.h>
 #include <asm/irq.h>
 #include <asm/mmu_context.h>
 #include <asm/io.h>
 #include <asm/pgtable.h>
 #include <asm/core_apecs.h>
 #include <asm/core_cia.h>
 #include <asm/tlbflush.h>

 #include "proto.h"
 #include "irq_impl.h"
 #include "pci_impl.h"
 #include "machvec_impl.h"

 /* Note mask bit is true for ENABLED irqs.  */
 static int cached_irq_mask;

 static inline void
 noritake_update_irq_hw(int irq, int mask)
 {
 	int port = 0x54a;
 	if (irq >= 32) {
 	    mask >>= 16;
 	    port = 0x54c;
 	}
 	outw(mask, port);
 }

 static void
 noritake_enable_irq(struct irq_data *d)
 {
 	noritake_update_irq_hw(d->irq, cached_irq_mask |= 1 << (d->irq - 16));
 }

 static void
 noritake_disable_irq(struct irq_data *d)
 {
 	noritake_update_irq_hw(d->irq, cached_irq_mask &= ~(1 << (d->irq - 16)));
 }

 static struct irq_chip noritake_irq_type = {
 	.name		= "NORITAKE",
 	.irq_unmask	= noritake_enable_irq,
 	.irq_mask	= noritake_disable_irq,
 	.irq_mask_ack	= noritake_disable_irq,
 };

 static void
 noritake_device_interrupt(unsigned long vector)
 {
 	unsigned long pld;
 	unsigned int i;

 	/* Read the interrupt summary registers of NORITAKE */
 	pld = (((unsigned long) inw(0x54c) << 32)
 	       | ((unsigned long) inw(0x54a) << 16)
 	       | ((unsigned long) inb(0xa0) << 8)
 	       | inb(0x20));

 	/*
 	 * Now for every possible bit set, work through them and call
 	 * the appropriate interrupt handler.
 	 */
 	while (pld) {
 		i = ffz(~pld);
 		pld &= pld - 1; /* clear least bit set */
 		if (i < 16) {
 			isa_device_interrupt(vector);
 		} else {
 			handle_irq(i);
 		}
 	}
 }

 static void
 noritake_srm_device_interrupt(unsigned long vector)
 {
 	int irq;

 	irq = (vector - 0x800) >> 4;

 	/*
 	 * I really hate to do this, too, but the NORITAKE SRM console also
 	 * reports PCI vectors *lower* than I expected from the bit numbers
 	 * in the documentation.
 	 * But I really don't want to change the fixup code for allocation
 	 * of IRQs, nor the alpha_irq_mask maintenance stuff, both of which
 	 * look nice and clean now.
 	 * So, here's this additional grotty hack... :-(
 	 */
 	if (irq >= 16)
 		irq = irq + 1;

 	handle_irq(irq);
 }

 static void __init
 noritake_init_irq(void)
 {
 	long i;

 	if (alpha_using_srm)
 		alpha_mv.device_interrupt = noritake_srm_device_interrupt;

 	outw(0, 0x54a);
 	outw(0, 0x54c);

 	for (i = 16; i < 48; ++i) {
 		irq_set_chip_and_handler(i, &noritake_irq_type,
 					 handle_level_irq);
 		irq_set_status_flags(i, IRQ_LEVEL);
 	}

 	init_i8259a_irqs();
 	common_init_isa_dma();
 }


 /*
  * PCI Fixup configuration.
  *
  * Summary @ 0x542, summary register #1:
  * Bit      Meaning
  * 0        All valid ints from summary regs 2 & 3
  * 1        QLOGIC ISP1020A SCSI
  * 2        Interrupt Line A from slot 0
  * 3        Interrupt Line B from slot 0
  * 4        Interrupt Line A from slot 1
  * 5        Interrupt line B from slot 1
  * 6        Interrupt Line A from slot 2
  * 7        Interrupt Line B from slot 2
  * 8        Interrupt Line A from slot 3
  * 9        Interrupt Line B from slot 3
  *10        Interrupt Line A from slot 4
  *11        Interrupt Line B from slot 4
  *12        Interrupt Line A from slot 5
  *13        Interrupt Line B from slot 5
  *14        Interrupt Line A from slot 6
  *15        Interrupt Line B from slot 6
  *
  * Summary @ 0x544, summary register #2:
  * Bit      Meaning
  * 0        OR of all unmasked ints in SR #2
  * 1        OR of secondary bus ints
  * 2        Interrupt Line C from slot 0
  * 3        Interrupt Line D from slot 0
  * 4        Interrupt Line C from slot 1
  * 5        Interrupt line D from slot 1
  * 6        Interrupt Line C from slot 2
  * 7        Interrupt Line D from slot 2
  * 8        Interrupt Line C from slot 3
  * 9        Interrupt Line D from slot 3
  *10        Interrupt Line C from slot 4
  *11        Interrupt Line D from slot 4
  *12        Interrupt Line C from slot 5
  *13        Interrupt Line D from slot 5
  *14        Interrupt Line C from slot 6
  *15        Interrupt Line D from slot 6
  *
  * The device to slot mapping looks like:
  *
  * Slot     Device
  *  7       Intel PCI-EISA bridge chip
  *  8       DEC PCI-PCI bridge chip
  * 11       PCI on board slot 0
  * 12       PCI on board slot 1
  * 13       PCI on board slot 2
  *
  *
  * This two layered interrupt approach means that we allocate IRQ 16 and
  * above for PCI interrupts.  The IRQ relates to which bit the interrupt
  * comes in on.  This makes interrupt processing much easier.
  */

 static int
 noritake_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
 	static char irq_tab[15][5] = {
 		/*INT    INTA   INTB   INTC   INTD */
 		/* note: IDSELs 16, 17, and 25 are CORELLE only */
 		{ 16+1,  16+1,  16+1,  16+1,  16+1},  /* IdSel 16,  QLOGIC */
 		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 17, S3 Trio64 */
 		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 18,  PCEB */
 		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 19,  PPB  */
 		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 20,  ???? */
 		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 21,  ???? */
 		{ 16+2,  16+2,  16+3,  32+2,  32+3},  /* IdSel 22,  slot 0 */
 		{ 16+4,  16+4,  16+5,  32+4,  32+5},  /* IdSel 23,  slot 1 */
 		{ 16+6,  16+6,  16+7,  32+6,  32+7},  /* IdSel 24,  slot 2 */
 		{ 16+8,  16+8,  16+9,  32+8,  32+9},  /* IdSel 25,  slot 3 */
 		/* The following 5 are actually on PCI bus 1, which is
 		   across the built-in bridge of the NORITAKE only.  */
 		{ 16+1,  16+1,  16+1,  16+1,  16+1},  /* IdSel 16,  QLOGIC */
 		{ 16+8,  16+8,  16+9,  32+8,  32+9},  /* IdSel 17,  slot 3 */
 		{16+10, 16+10, 16+11, 32+10, 32+11},  /* IdSel 18,  slot 4 */
 		{16+12, 16+12, 16+13, 32+12, 32+13},  /* IdSel 19,  slot 5 */
 		{16+14, 16+14, 16+15, 32+14, 32+15},  /* IdSel 20,  slot 6 */
 	};
 	const long min_idsel = 5, max_idsel = 19, irqs_per_slot = 5;
 	return COMMON_TABLE_LOOKUP;
 }

 static u8
 noritake_swizzle(struct pci_dev *dev, u8 *pinp)
 {
 	int slot, pin = *pinp;

 	if (dev->bus->number == 0) {
 		slot = PCI_SLOT(dev->devfn);
 	}
 	/* Check for the built-in bridge */
 	else if (PCI_SLOT(dev->bus->self->devfn) == 8) {
 		slot = PCI_SLOT(dev->devfn) + 15; /* WAG! */
 	}
 	else
 	{
 		/* Must be a card-based bridge.  */
 		do {
 			if (PCI_SLOT(dev->bus->self->devfn) == 8) {
 				slot = PCI_SLOT(dev->devfn) + 15;
 				break;
 			}
 			pin = pci_swizzle_interrupt_pin(dev, pin);

 			/* Move up the chain of bridges.  */
 			dev = dev->bus->self;
 			/* Slot of the next bridge.  */
 			slot = PCI_SLOT(dev->devfn);
 		} while (dev->bus->self);
 	}
 	*pinp = pin;
 	return slot;
 }

 #if defined(CONFIG_ALPHA_GENERIC) || !defined(CONFIG_ALPHA_PRIMO)
 static void
 noritake_apecs_machine_check(unsigned long vector, unsigned long la_ptr)
 {
 #define MCHK_NO_DEVSEL 0x205U
 #define MCHK_NO_TABT 0x204U

         struct el_common *mchk_header;
         unsigned int code;

         mchk_header = (struct el_common *)la_ptr;

         /* Clear the error before any reporting.  */
         mb();
         mb(); /* magic */
         draina();
         apecs_pci_clr_err();
         wrmces(0x7);
         mb();

         code = mchk_header->code;
         process_mcheck_info(vector, la_ptr, "NORITAKE APECS",
                             (mcheck_expected(0)
                              && (code == MCHK_NO_DEVSEL
                                  || code == MCHK_NO_TABT)));
 }
 #endif


 /*
  * The System Vectors
  */

 #if defined(CONFIG_ALPHA_GENERIC) || !defined(CONFIG_ALPHA_PRIMO)
 struct alpha_machine_vector noritake_mv __initmv = {
 	.vector_name		= "Noritake",
 	DO_EV4_MMU,
 	DO_DEFAULT_RTC,
 	DO_APECS_IO,
 	.machine_check		= noritake_apecs_machine_check,
 	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
 	.min_io_address		= EISA_DEFAULT_IO_BASE,
 	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,

 	.nr_irqs		= 48,
 	.device_interrupt	= noritake_device_interrupt,

 	.init_arch		= apecs_init_arch,
 	.init_irq		= noritake_init_irq,
 	.init_rtc		= common_init_rtc,
 	.init_pci		= common_init_pci,
 	.pci_map_irq		= noritake_map_irq,
 	.pci_swizzle		= noritake_swizzle,
 };
 ALIAS_MV(noritake)
 #endif

 #if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_PRIMO)
 struct alpha_machine_vector noritake_primo_mv __initmv = {
 	.vector_name		= "Noritake-Primo",
 	DO_EV5_MMU,
 	DO_DEFAULT_RTC,
 	DO_CIA_IO,
 	.machine_check		= cia_machine_check,
 	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
 	.min_io_address		= EISA_DEFAULT_IO_BASE,
 	.min_mem_address	= CIA_DEFAULT_MEM_BASE,

 	.nr_irqs		= 48,
 	.device_interrupt	= noritake_device_interrupt,

 	.init_arch		= cia_init_arch,
 	.init_irq		= noritake_init_irq,
 	.init_rtc		= common_init_rtc,
 	.init_pci		= cia_init_pci,
 	.kill_arch		= cia_kill_arch,
 	.pci_map_irq		= noritake_map_irq,
 	.pci_swizzle		= noritake_swizzle,
 };
 ALIAS_MV(noritake_primo)
 #endif
	// SPDX-License-Identifier: GPL-2.0
	/*
	* linux/arch/alpha/kernel/sys_noritake.c
	*
	* Copyright (C) 1995 David A Rusling
	* Copyright (C) 1996 Jay A Estabrook
	* Copyright (C) 1998, 1999 Richard Henderson
	*
	* Code supporting the NORITAKE (AlphaServer 1000A),
	* CORELLE (AlphaServer 800), and ALCOR Primo (AlphaStation 600A).
	*/

	#include <linux/kernel.h>
	#include <linux/types.h>
	#include <linux/mm.h>
	#include <linux/sched.h>
	#include <linux/pci.h>
	#include <linux/init.h>
	#include <linux/bitops.h>

	#include <asm/ptrace.h>
	#include <asm/mce.h>
	#include <asm/dma.h>
	#include <asm/irq.h>
	#include <asm/mmu_context.h>
	#include <asm/io.h>
	#include <asm/pgtable.h>
	#include <asm/core_apecs.h>
	#include <asm/core_cia.h>
	#include <asm/tlbflush.h>

	#include "proto.h"
	#include "irq_impl.h"
	#include "pci_impl.h"
	#include "machvec_impl.h"

	/* Note mask bit is true for ENABLED irqs. */
	static int cached_irq_mask;

	static inline void
	noritake_update_irq_hw(int irq, int mask)
	{
	int port = 0x54a;
	if (irq >= 32) {
	mask >>= 16;
	port = 0x54c;
	}
	outw(mask, port);
	}

	static void
	noritake_enable_irq(struct irq_data *d)
	{
	noritake_update_irq_hw(d->irq, cached_irq_mask \|= 1 << (d->irq - 16));
	}

	static void
	noritake_disable_irq(struct irq_data *d)
	{
	noritake_update_irq_hw(d->irq, cached_irq_mask &= ~(1 << (d->irq - 16)));
	}

	static struct irq_chip noritake_irq_type = {
	.name = "NORITAKE",
	.irq_unmask = noritake_enable_irq,
	.irq_mask = noritake_disable_irq,
	.irq_mask_ack = noritake_disable_irq,
	};

	static void
	noritake_device_interrupt(unsigned long vector)
	{
	unsigned long pld;
	unsigned int i;

	/* Read the interrupt summary registers of NORITAKE */
	pld = (((unsigned long) inw(0x54c) << 32)
	\| ((unsigned long) inw(0x54a) << 16)
	\| ((unsigned long) inb(0xa0) << 8)
	\| inb(0x20));

	/*
	* Now for every possible bit set, work through them and call
	* the appropriate interrupt handler.
	*/
	while (pld) {
	i = ffz(~pld);
	pld &= pld - 1; /* clear least bit set */
	if (i < 16) {
	isa_device_interrupt(vector);
	} else {
	handle_irq(i);
	}
	}
	}

	static void
	noritake_srm_device_interrupt(unsigned long vector)
	{
	int irq;

	irq = (vector - 0x800) >> 4;

	/*
	* I really hate to do this, too, but the NORITAKE SRM console also
	* reports PCI vectors lower than I expected from the bit numbers
	* in the documentation.
	* But I really don't want to change the fixup code for allocation
	* of IRQs, nor the alpha_irq_mask maintenance stuff, both of which
	* look nice and clean now.
	* So, here's this additional grotty hack... :-(
	*/
	if (irq >= 16)
	irq = irq + 1;

	handle_irq(irq);
	}

	static void __init
	noritake_init_irq(void)
	{
	long i;

	if (alpha_using_srm)
	alpha_mv.device_interrupt = noritake_srm_device_interrupt;

	outw(0, 0x54a);
	outw(0, 0x54c);

	for (i = 16; i < 48; ++i) {
	irq_set_chip_and_handler(i, &noritake_irq_type,
	handle_level_irq);
	irq_set_status_flags(i, IRQ_LEVEL);
	}

	init_i8259a_irqs();
	common_init_isa_dma();
	}


	/*
	* PCI Fixup configuration.
	*
	* Summary @ 0x542, summary register #1:
	* Bit Meaning
	* 0 All valid ints from summary regs 2 & 3
	* 1 QLOGIC ISP1020A SCSI
	* 2 Interrupt Line A from slot 0
	* 3 Interrupt Line B from slot 0
	* 4 Interrupt Line A from slot 1
	* 5 Interrupt line B from slot 1
	* 6 Interrupt Line A from slot 2
	* 7 Interrupt Line B from slot 2
	* 8 Interrupt Line A from slot 3
	* 9 Interrupt Line B from slot 3
	*10 Interrupt Line A from slot 4
	*11 Interrupt Line B from slot 4
	*12 Interrupt Line A from slot 5
	*13 Interrupt Line B from slot 5
	*14 Interrupt Line A from slot 6
	*15 Interrupt Line B from slot 6
	*
	* Summary @ 0x544, summary register #2:
	* Bit Meaning
	* 0 OR of all unmasked ints in SR #2
	* 1 OR of secondary bus ints
	* 2 Interrupt Line C from slot 0
	* 3 Interrupt Line D from slot 0
	* 4 Interrupt Line C from slot 1
	* 5 Interrupt line D from slot 1
	* 6 Interrupt Line C from slot 2
	* 7 Interrupt Line D from slot 2
	* 8 Interrupt Line C from slot 3
	* 9 Interrupt Line D from slot 3
	*10 Interrupt Line C from slot 4
	*11 Interrupt Line D from slot 4
	*12 Interrupt Line C from slot 5
	*13 Interrupt Line D from slot 5
	*14 Interrupt Line C from slot 6
	*15 Interrupt Line D from slot 6
	*
	* The device to slot mapping looks like:
	*
	* Slot Device
	* 7 Intel PCI-EISA bridge chip
	* 8 DEC PCI-PCI bridge chip
	* 11 PCI on board slot 0
	* 12 PCI on board slot 1
	* 13 PCI on board slot 2
	*
	*
	* This two layered interrupt approach means that we allocate IRQ 16 and
	* above for PCI interrupts. The IRQ relates to which bit the interrupt
	* comes in on. This makes interrupt processing much easier.
	*/

	static int
	noritake_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
	{
	static char irq_tab[15][5] = {
	/INT INTA INTB INTC INTD /
	/* note: IDSELs 16, 17, and 25 are CORELLE only */
	{ 16+1, 16+1, 16+1, 16+1, 16+1}, /* IdSel 16, QLOGIC */
	{ -1, -1, -1, -1, -1}, /* IdSel 17, S3 Trio64 */
	{ -1, -1, -1, -1, -1}, /* IdSel 18, PCEB */
	{ -1, -1, -1, -1, -1}, /* IdSel 19, PPB */
	{ -1, -1, -1, -1, -1}, /* IdSel 20, ???? */
	{ -1, -1, -1, -1, -1}, /* IdSel 21, ???? */
	{ 16+2, 16+2, 16+3, 32+2, 32+3}, /* IdSel 22, slot 0 */
	{ 16+4, 16+4, 16+5, 32+4, 32+5}, /* IdSel 23, slot 1 */
	{ 16+6, 16+6, 16+7, 32+6, 32+7}, /* IdSel 24, slot 2 */
	{ 16+8, 16+8, 16+9, 32+8, 32+9}, /* IdSel 25, slot 3 */
	/* The following 5 are actually on PCI bus 1, which is
	across the built-in bridge of the NORITAKE only. */
	{ 16+1, 16+1, 16+1, 16+1, 16+1}, /* IdSel 16, QLOGIC */
	{ 16+8, 16+8, 16+9, 32+8, 32+9}, /* IdSel 17, slot 3 */
	{16+10, 16+10, 16+11, 32+10, 32+11}, /* IdSel 18, slot 4 */
	{16+12, 16+12, 16+13, 32+12, 32+13}, /* IdSel 19, slot 5 */
	{16+14, 16+14, 16+15, 32+14, 32+15}, /* IdSel 20, slot 6 */
	};
	const long min_idsel = 5, max_idsel = 19, irqs_per_slot = 5;
	return COMMON_TABLE_LOOKUP;
	}

	static u8
	noritake_swizzle(struct pci_dev dev, u8 pinp)
	{
	int slot, pin = *pinp;

	if (dev->bus->number == 0) {
	slot = PCI_SLOT(dev->devfn);
	}
	/* Check for the built-in bridge */
	else if (PCI_SLOT(dev->bus->self->devfn) == 8) {
	slot = PCI_SLOT(dev->devfn) + 15; /* WAG! */
	}
	else
	{
	/* Must be a card-based bridge. */
	do {
	if (PCI_SLOT(dev->bus->self->devfn) == 8) {
	slot = PCI_SLOT(dev->devfn) + 15;
	break;
	}
	pin = pci_swizzle_interrupt_pin(dev, pin);

	/* Move up the chain of bridges. */
	dev = dev->bus->self;
	/* Slot of the next bridge. */
	slot = PCI_SLOT(dev->devfn);
	} while (dev->bus->self);
	}
	*pinp = pin;
	return slot;
	}

	#if defined(CONFIG_ALPHA_GENERIC) \|\| !defined(CONFIG_ALPHA_PRIMO)
	static void
	noritake_apecs_machine_check(unsigned long vector, unsigned long la_ptr)
	{
	#define MCHK_NO_DEVSEL 0x205U
	#define MCHK_NO_TABT 0x204U

	struct el_common *mchk_header;
	unsigned int code;

	mchk_header = (struct el_common *)la_ptr;

	/* Clear the error before any reporting. */
	mb();
	mb(); /* magic */
	draina();
	apecs_pci_clr_err();
	wrmces(0x7);
	mb();

	code = mchk_header->code;
	process_mcheck_info(vector, la_ptr, "NORITAKE APECS",
	(mcheck_expected(0)
	&& (code == MCHK_NO_DEVSEL
	\|\| code == MCHK_NO_TABT)));
	}
	#endif


	/*
	* The System Vectors
	*/

	#if defined(CONFIG_ALPHA_GENERIC) \|\| !defined(CONFIG_ALPHA_PRIMO)
	struct alpha_machine_vector noritake_mv __initmv = {
	.vector_name = "Noritake",
	DO_EV4_MMU,
	DO_DEFAULT_RTC,
	DO_APECS_IO,
	.machine_check = noritake_apecs_machine_check,
	.max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
	.min_io_address = EISA_DEFAULT_IO_BASE,
	.min_mem_address = APECS_AND_LCA_DEFAULT_MEM_BASE,

	.nr_irqs = 48,
	.device_interrupt = noritake_device_interrupt,

	.init_arch = apecs_init_arch,
	.init_irq = noritake_init_irq,
	.init_rtc = common_init_rtc,
	.init_pci = common_init_pci,
	.pci_map_irq = noritake_map_irq,
	.pci_swizzle = noritake_swizzle,
	};
	ALIAS_MV(noritake)
	#endif

	#if defined(CONFIG_ALPHA_GENERIC) \|\| defined(CONFIG_ALPHA_PRIMO)
	struct alpha_machine_vector noritake_primo_mv __initmv = {
	.vector_name = "Noritake-Primo",
	DO_EV5_MMU,
	DO_DEFAULT_RTC,
	DO_CIA_IO,
	.machine_check = cia_machine_check,
	.max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
	.min_io_address = EISA_DEFAULT_IO_BASE,
	.min_mem_address = CIA_DEFAULT_MEM_BASE,

	.nr_irqs = 48,
	.device_interrupt = noritake_device_interrupt,

	.init_arch = cia_init_arch,
	.init_irq = noritake_init_irq,
	.init_rtc = common_init_rtc,
	.init_pci = cia_init_pci,
	.kill_arch = cia_kill_arch,
	.pci_map_irq = noritake_map_irq,
	.pci_swizzle = noritake_swizzle,
	};
	ALIAS_MV(noritake_primo)
	#endif