blob: b6c1afa6f02d3663fd547cb3f34b1d70d2d63049 [file] [log] [blame]
Austrian Microsystems AS3935 Franklin lightning sensor device driver
Required properties:
- compatible: must be "ams,as3935"
- reg: SPI chip select number for the device
- spi-max-frequency: specifies maximum SPI clock frequency
- spi-cpha: SPI Mode 1. Refer to spi/spi-bus.txt for generic SPI
slave node bindings.
- interrupt-parent : should be the phandle for the interrupt controller
- interrupts : the sole interrupt generated by the device
Refer to interrupt-controller/interrupts.txt for generic
interrupt client node bindings.
Optional properties:
- ams,tuning-capacitor-pf: Calibration tuning capacitor stepping
value 0 - 120pF. This will require using the calibration data from
the manufacturer.
- ams,nflwdth: Set the noise and watchdog threshold register on
startup. This will need to set according to the noise from the
MCU board, and possibly the local environment. Refer to the
datasheet for the threshold settings.
Example:
as3935@0 {
compatible = "ams,as3935";
reg = <0>;
spi-max-frequency = <400000>;
spi-cpha;
interrupt-parent = <&gpio1>;
interrupts = <16 1>;
ams,tuning-capacitor-pf = <80>;
ams,nflwdth = <0x44>;
};