mac80211: make listen_interval be limited by low level driver
This patch makes possible for a driver to specify maximal listen interval
The possibility for user to configure listen interval is not implemented
yet, currently the maximum provided by the driver or 1 is used.
Mac80211 uses config handler to set listen interval for to the driver.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 9d99f2e..b397e4d 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -432,6 +432,7 @@
* @radio_enabled: when zero, driver is required to switch off the radio.
* TODO make a flag
* @beacon_int: beacon interval (TODO make interface config)
+ * @listen_interval: listen interval in units of beacon interval
* @flags: configuration flags defined above
* @power_level: requested transmit power (in dBm)
* @max_antenna_gain: maximum antenna gain (in dBi)
@@ -446,6 +447,7 @@
int radio_enabled;
int beacon_int;
+ u16 listen_interval;
u32 flags;
int power_level;
int max_antenna_gain;
@@ -787,6 +789,9 @@
* @max_signal: Maximum value for signal (rssi) in RX information, used
* only when @IEEE80211_HW_SIGNAL_UNSPEC or @IEEE80211_HW_SIGNAL_DB
*
+ * @max_listen_interval: max listen interval in units of beacon interval
+ * that HW supports
+ *
* @queues: number of available hardware transmit queues for
* data packets. WMM/QoS requires at least four, these
* queues need to have configurable access parameters.
@@ -814,7 +819,9 @@
unsigned int extra_tx_headroom;
int channel_change_time;
int vif_data_size;
- u16 queues, ampdu_queues;
+ u16 queues;
+ u16 ampdu_queues;
+ u16 max_listen_interval;
s8 max_signal;
};
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index a4c5b90..0c02c47 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -1689,6 +1689,11 @@
if (local->hw.conf.beacon_int < 10)
local->hw.conf.beacon_int = 100;
+ if (local->hw.max_listen_interval == 0)
+ local->hw.max_listen_interval = 1;
+
+ local->hw.conf.listen_interval = local->hw.max_listen_interval;
+
local->wstats_flags |= local->hw.flags & (IEEE80211_HW_SIGNAL_UNSPEC |
IEEE80211_HW_SIGNAL_DB |
IEEE80211_HW_SIGNAL_DBM) ?
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 591e633..779affd 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -774,7 +774,8 @@
mgmt->frame_control = IEEE80211_FC(IEEE80211_FTYPE_MGMT,
IEEE80211_STYPE_REASSOC_REQ);
mgmt->u.reassoc_req.capab_info = cpu_to_le16(capab);
- mgmt->u.reassoc_req.listen_interval = cpu_to_le16(1);
+ mgmt->u.reassoc_req.listen_interval =
+ cpu_to_le16(local->hw.conf.listen_interval);
memcpy(mgmt->u.reassoc_req.current_ap, ifsta->prev_bssid,
ETH_ALEN);
} else {
@@ -782,7 +783,8 @@
mgmt->frame_control = IEEE80211_FC(IEEE80211_FTYPE_MGMT,
IEEE80211_STYPE_ASSOC_REQ);
mgmt->u.assoc_req.capab_info = cpu_to_le16(capab);
- mgmt->u.assoc_req.listen_interval = cpu_to_le16(1);
+ mgmt->u.reassoc_req.listen_interval =
+ cpu_to_le16(local->hw.conf.listen_interval);
}
/* SSID */
