diff --git a/Documentation/devicetree/bindings/leds/common.txt b/Documentation/devicetree/bindings/leds/common.txt
index 747c538..6841984 100644
--- a/Documentation/devicetree/bindings/leds/common.txt
+++ b/Documentation/devicetree/bindings/leds/common.txt
@@ -29,14 +29,23 @@
      "ide-disk" - LED indicates disk activity
      "timer" - LED flashes at a fixed, configurable rate
 
-- max-microamp : maximum intensity in microamperes of the LED
-		 (torch LED for flash devices)
-- flash-max-microamp : maximum intensity in microamperes of the
-                       flash LED; it is mandatory if the LED should
-		       support the flash mode
-- flash-timeout-us : timeout in microseconds after which the flash
-                     LED is turned off
+- led-max-microamp : Maximum LED supply current in microamperes. This property
+                     can be made mandatory for the board configurations
+                     introducing a risk of hardware damage in case an excessive
+                     current is set.
+                     For flash LED controllers with configurable current this
+                     property is mandatory for the LEDs in the non-flash modes
+                     (e.g. torch or indicator).
 
+Required properties for flash LED child nodes:
+- flash-max-microamp : Maximum flash LED supply current in microamperes.
+- flash-max-timeout-us : Maximum timeout in microseconds after which the flash
+                         LED is turned off.
+
+For controllers that have no configurable current the flash-max-microamp
+property can be omitted.
+For controllers that have no configurable timeout the flash-max-timeout-us
+property can be omitted.
 
 Examples:
 
@@ -49,7 +58,7 @@
 camera-flash {
 	label = "Flash";
 	led-sources = <0>, <1>;
-	max-microamp = <50000>;
+	led-max-microamp = <50000>;
 	flash-max-microamp = <320000>;
-	flash-timeout-us = <500000>;
+	flash-max-timeout-us = <500000>;
 };
diff --git a/Documentation/devicetree/bindings/leds/leds-ns2.txt b/Documentation/devicetree/bindings/leds/leds-ns2.txt
index aef3aca..9f81258 100644
--- a/Documentation/devicetree/bindings/leds/leds-ns2.txt
+++ b/Documentation/devicetree/bindings/leds/leds-ns2.txt
@@ -8,6 +8,9 @@
 Required sub-node properties:
 - cmd-gpio: Command LED GPIO. See OF device-tree GPIO specification.
 - slow-gpio: Slow LED GPIO. See OF device-tree GPIO specification.
+- modes-map: A mapping between LED modes (off, on or SATA activity blinking) and
+  the corresponding cmd-gpio/slow-gpio values. All the GPIO values combinations
+  should be given in order to avoid having an unknown mode at driver probe time.
 
 Optional sub-node properties:
 - label: Name for this LED. If omitted, the label is taken from the node name.
@@ -15,6 +18,8 @@
 
 Example:
 
+#include <dt-bindings/leds/leds-ns2.h>
+
 ns2-leds {
 	compatible = "lacie,ns2-leds";
 
@@ -22,5 +27,9 @@
 		label = "ns2:blue:sata";
 		slow-gpio = <&gpio0 29 0>;
 		cmd-gpio = <&gpio0 30 0>;
+		modes-map = <NS_V2_LED_OFF  0 1
+			     NS_V2_LED_ON   1 0
+			     NS_V2_LED_ON   0 0
+			     NS_V2_LED_SATA 1 1>;
 	};
 };
diff --git a/MAINTAINERS b/MAINTAINERS
index b41244b..cdcd9c5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6042,11 +6042,10 @@
 F:	drivers/scsi/53c700*
 
 LED SUBSYSTEM
-M:	Bryan Wu <cooloney@gmail.com>
 M:	Richard Purdie <rpurdie@rpsys.net>
 M:	Jacek Anaszewski <j.anaszewski@samsung.com>
 L:	linux-leds@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds.git
 S:	Maintained
 F:	drivers/leds/
 F:	include/linux/leds.h
diff --git a/arch/arm/boot/dts/kirkwood-d2net.dts b/arch/arm/boot/dts/kirkwood-d2net.dts
index 6b78560..e1c25c3 100644
--- a/arch/arm/boot/dts/kirkwood-d2net.dts
+++ b/arch/arm/boot/dts/kirkwood-d2net.dts
@@ -10,6 +10,7 @@
 
 /dts-v1/;
 
+#include <dt-bindings/leds/leds-ns2.h>
 #include "kirkwood-netxbig.dtsi"
 
 / {
@@ -28,6 +29,10 @@
 			label = "d2net_v2:blue:sata";
 			slow-gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
 			cmd-gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+			modes-map = <NS_V2_LED_OFF  1 0
+				     NS_V2_LED_ON   0 1
+				     NS_V2_LED_ON   1 1
+				     NS_V2_LED_SATA 0 0>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/kirkwood-is2.dts b/arch/arm/boot/dts/kirkwood-is2.dts
index da674bb..4121674 100644
--- a/arch/arm/boot/dts/kirkwood-is2.dts
+++ b/arch/arm/boot/dts/kirkwood-is2.dts
@@ -1,5 +1,6 @@
 /dts-v1/;
 
+#include <dt-bindings/leds/leds-ns2.h>
 #include "kirkwood-ns2-common.dtsi"
 
 / {
@@ -27,6 +28,10 @@
 			label = "ns2:blue:sata";
 			slow-gpio = <&gpio0 29 0>;
 			cmd-gpio = <&gpio0 30 0>;
+			modes-map = <NS_V2_LED_OFF  1 0
+				     NS_V2_LED_ON   0 1
+				     NS_V2_LED_ON   1 1
+				     NS_V2_LED_SATA 0 0>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/kirkwood-ns2.dts b/arch/arm/boot/dts/kirkwood-ns2.dts
index 53368d1..190189d 100644
--- a/arch/arm/boot/dts/kirkwood-ns2.dts
+++ b/arch/arm/boot/dts/kirkwood-ns2.dts
@@ -1,5 +1,6 @@
 /dts-v1/;
 
+#include <dt-bindings/leds/leds-ns2.h>
 #include "kirkwood-ns2-common.dtsi"
 
 / {
@@ -27,6 +28,10 @@
 			label = "ns2:blue:sata";
 			slow-gpio = <&gpio0 29 0>;
 			cmd-gpio = <&gpio0 30 0>;
+			modes-map = <NS_V2_LED_OFF  1 0
+				     NS_V2_LED_ON   0 1
+				     NS_V2_LED_ON   1 1
+				     NS_V2_LED_SATA 0 0>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/kirkwood-ns2max.dts b/arch/arm/boot/dts/kirkwood-ns2max.dts
index 72c78d0..55cc41d 100644
--- a/arch/arm/boot/dts/kirkwood-ns2max.dts
+++ b/arch/arm/boot/dts/kirkwood-ns2max.dts
@@ -1,5 +1,6 @@
 /dts-v1/;
 
+#include <dt-bindings/leds/leds-ns2.h>
 #include "kirkwood-ns2-common.dtsi"
 
 / {
@@ -46,6 +47,10 @@
 			label = "ns2:blue:sata";
 			slow-gpio = <&gpio0 29 0>;
 			cmd-gpio = <&gpio0 30 0>;
+			modes-map = <NS_V2_LED_OFF  1 0
+				     NS_V2_LED_ON   0 1
+				     NS_V2_LED_ON   1 1
+				     NS_V2_LED_SATA 0 0>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/kirkwood-ns2mini.dts b/arch/arm/boot/dts/kirkwood-ns2mini.dts
index c441bf6..9935f3e 100644
--- a/arch/arm/boot/dts/kirkwood-ns2mini.dts
+++ b/arch/arm/boot/dts/kirkwood-ns2mini.dts
@@ -1,5 +1,6 @@
 /dts-v1/;
 
+#include <dt-bindings/leds/leds-ns2.h>
 #include "kirkwood-ns2-common.dtsi"
 
 / {
@@ -47,6 +48,10 @@
 			label = "ns2:blue:sata";
 			slow-gpio = <&gpio0 29 0>;
 			cmd-gpio = <&gpio0 30 0>;
+			modes-map = <NS_V2_LED_OFF  1 0
+				     NS_V2_LED_ON   0 1
+				     NS_V2_LED_ON   1 1
+				     NS_V2_LED_SATA 0 0>;
 		};
 	};
 };
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 9ad35f7..23408bd 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -43,7 +43,7 @@
 	tristate "LED support for the AAT1290"
 	depends on LEDS_CLASS_FLASH
 	depends on V4L2_FLASH_LED_CLASS || !V4L2_FLASH_LED_CLASS
-	depends on GPIOLIB
+	depends on GPIOLIB || COMPILE_TEST
 	depends on OF
 	depends on PINCTRL
 	help
@@ -419,7 +419,7 @@
 config LEDS_LT3593
 	tristate "LED driver for LT3593 controllers"
 	depends on LEDS_CLASS
-	depends on GPIOLIB
+	depends on GPIOLIB || COMPILE_TEST
 	help
 	  This option enables support for LEDs driven by a Linear Technology
 	  LT3593 controller. This controller uses a special one-wire pulse
@@ -455,12 +455,16 @@
 config LEDS_NS2
 	tristate "LED support for Network Space v2 GPIO LEDs"
 	depends on LEDS_CLASS
-	depends on MACH_KIRKWOOD
+	depends on MACH_KIRKWOOD || MACH_ARMADA_370
 	default y
 	help
-	  This option enable support for the dual-GPIO LED found on the
-	  Network Space v2 board (and parents). This include Internet Space v2,
-	  Network Space (Max) v2 and d2 Network v2 boards.
+	  This option enables support for the dual-GPIO LEDs found on the
+	  following LaCie/Seagate boards:
+
+		Network Space v2 (and parents: Max, Mini)
+		Internet Space v2
+		d2 Network v2
+		n090401 (Seagate NAS 4-Bay)
 
 config LEDS_NETXBIG
 	tristate "LED support for Big Network series LEDs"
@@ -543,7 +547,8 @@
 
 config LEDS_KTD2692
 	tristate "LED support for KTD2692 flash LED controller"
-	depends on LEDS_CLASS_FLASH && GPIOLIB && OF
+	depends on LEDS_CLASS_FLASH && OF
+	depends on GPIOLIB || COMPILE_TEST
 	help
 	  This option enables support for KTD2692 LED flash connected
 	  through ExpressWire interface.
diff --git a/drivers/leds/led-class.c b/drivers/leds/led-class.c
index beabfbc..ca51d58 100644
--- a/drivers/leds/led-class.c
+++ b/drivers/leds/led-class.c
@@ -228,12 +228,15 @@
 {
 	unsigned int i = 0;
 	int ret = 0;
+	struct device *dev;
 
 	strlcpy(name, init_name, len);
 
-	while (class_find_device(leds_class, NULL, name, match_name) &&
-	       (ret < len))
+	while ((ret < len) &&
+	       (dev = class_find_device(leds_class, NULL, name, match_name))) {
+		put_device(dev);
 		ret = snprintf(name, len, "%s_%u", init_name, ++i);
+	}
 
 	if (ret >= len)
 		return -ENOMEM;
diff --git a/drivers/leds/leds-fsg.c b/drivers/leds/leds-fsg.c
index 2b4dc73..257a813 100644
--- a/drivers/leds/leds-fsg.c
+++ b/drivers/leds/leds-fsg.c
@@ -156,63 +156,35 @@
 	latch_value = 0xffff;
 	*latch_address = latch_value;
 
-	ret = led_classdev_register(&pdev->dev, &fsg_wlan_led);
+	ret = devm_led_classdev_register(&pdev->dev, &fsg_wlan_led);
 	if (ret < 0)
-		goto failwlan;
+		return ret;
 
-	ret = led_classdev_register(&pdev->dev, &fsg_wan_led);
+	ret = devm_led_classdev_register(&pdev->dev, &fsg_wan_led);
 	if (ret < 0)
-		goto failwan;
+		return ret;
 
-	ret = led_classdev_register(&pdev->dev, &fsg_sata_led);
+	ret = devm_led_classdev_register(&pdev->dev, &fsg_sata_led);
 	if (ret < 0)
-		goto failsata;
+		return ret;
 
-	ret = led_classdev_register(&pdev->dev, &fsg_usb_led);
+	ret = devm_led_classdev_register(&pdev->dev, &fsg_usb_led);
 	if (ret < 0)
-		goto failusb;
+		return ret;
 
-	ret = led_classdev_register(&pdev->dev, &fsg_sync_led);
+	ret = devm_led_classdev_register(&pdev->dev, &fsg_sync_led);
 	if (ret < 0)
-		goto failsync;
+		return ret;
 
-	ret = led_classdev_register(&pdev->dev, &fsg_ring_led);
+	ret = devm_led_classdev_register(&pdev->dev, &fsg_ring_led);
 	if (ret < 0)
-		goto failring;
-
-	return ret;
-
- failring:
-	led_classdev_unregister(&fsg_sync_led);
- failsync:
-	led_classdev_unregister(&fsg_usb_led);
- failusb:
-	led_classdev_unregister(&fsg_sata_led);
- failsata:
-	led_classdev_unregister(&fsg_wan_led);
- failwan:
-	led_classdev_unregister(&fsg_wlan_led);
- failwlan:
+		return ret;
 
 	return ret;
 }
 
-static int fsg_led_remove(struct platform_device *pdev)
-{
-	led_classdev_unregister(&fsg_wlan_led);
-	led_classdev_unregister(&fsg_wan_led);
-	led_classdev_unregister(&fsg_sata_led);
-	led_classdev_unregister(&fsg_usb_led);
-	led_classdev_unregister(&fsg_sync_led);
-	led_classdev_unregister(&fsg_ring_led);
-
-	return 0;
-}
-
-
 static struct platform_driver fsg_led_driver = {
 	.probe		= fsg_led_probe,
-	.remove		= fsg_led_remove,
 	.driver		= {
 		.name		= "fsg-led",
 	},
diff --git a/drivers/leds/leds-lm3530.c b/drivers/leds/leds-lm3530.c
index 91325de..b38430c 100644
--- a/drivers/leds/leds-lm3530.c
+++ b/drivers/leds/leds-lm3530.c
@@ -492,7 +492,6 @@
 	.id_table = lm3530_id,
 	.driver = {
 		.name = LM3530_NAME,
-		.owner = THIS_MODULE,
 	},
 };
 
diff --git a/drivers/leds/leds-lm355x.c b/drivers/leds/leds-lm355x.c
index f5112cb..48872997 100644
--- a/drivers/leds/leds-lm355x.c
+++ b/drivers/leds/leds-lm355x.c
@@ -555,7 +555,6 @@
 static struct i2c_driver lm355x_i2c_driver = {
 	.driver = {
 		   .name = LM355x_NAME,
-		   .owner = THIS_MODULE,
 		   .pm = NULL,
 		   },
 	.probe = lm355x_probe,
diff --git a/drivers/leds/leds-lm3642.c b/drivers/leds/leds-lm3642.c
index d3dec01..02ebe34 100644
--- a/drivers/leds/leds-lm3642.c
+++ b/drivers/leds/leds-lm3642.c
@@ -446,7 +446,6 @@
 static struct i2c_driver lm3642_i2c_driver = {
 	.driver = {
 		   .name = LM3642_NAME,
-		   .owner = THIS_MODULE,
 		   .pm = NULL,
 		   },
 	.probe = lm3642_probe,
diff --git a/drivers/leds/leds-lp5521.c b/drivers/leds/leds-lp5521.c
index 8ca197a..63a9254 100644
--- a/drivers/leds/leds-lp5521.c
+++ b/drivers/leds/leds-lp5521.c
@@ -514,20 +514,19 @@
 	int ret;
 	struct lp55xx_chip *chip;
 	struct lp55xx_led *led;
-	struct lp55xx_platform_data *pdata;
+	struct lp55xx_platform_data *pdata = dev_get_platdata(&client->dev);
 	struct device_node *np = client->dev.of_node;
 
-	if (!dev_get_platdata(&client->dev)) {
+	if (!pdata) {
 		if (np) {
-			ret = lp55xx_of_populate_pdata(&client->dev, np);
-			if (ret < 0)
-				return ret;
+			pdata = lp55xx_of_populate_pdata(&client->dev, np);
+			if (IS_ERR(pdata))
+				return PTR_ERR(pdata);
 		} else {
 			dev_err(&client->dev, "no platform data\n");
 			return -EINVAL;
 		}
 	}
-	pdata = dev_get_platdata(&client->dev);
 
 	chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
 	if (!chip)
diff --git a/drivers/leds/leds-lp5523.c b/drivers/leds/leds-lp5523.c
index 584dbbc..1d0187f 100644
--- a/drivers/leds/leds-lp5523.c
+++ b/drivers/leds/leds-lp5523.c
@@ -880,20 +880,19 @@
 	int ret;
 	struct lp55xx_chip *chip;
 	struct lp55xx_led *led;
-	struct lp55xx_platform_data *pdata;
+	struct lp55xx_platform_data *pdata = dev_get_platdata(&client->dev);
 	struct device_node *np = client->dev.of_node;
 
-	if (!dev_get_platdata(&client->dev)) {
+	if (!pdata) {
 		if (np) {
-			ret = lp55xx_of_populate_pdata(&client->dev, np);
-			if (ret < 0)
-				return ret;
+			pdata = lp55xx_of_populate_pdata(&client->dev, np);
+			if (IS_ERR(pdata))
+				return PTR_ERR(pdata);
 		} else {
 			dev_err(&client->dev, "no platform data\n");
 			return -EINVAL;
 		}
 	}
-	pdata = dev_get_platdata(&client->dev);
 
 	chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
 	if (!chip)
diff --git a/drivers/leds/leds-lp5562.c b/drivers/leds/leds-lp5562.c
index ca85724..0360c59 100644
--- a/drivers/leds/leds-lp5562.c
+++ b/drivers/leds/leds-lp5562.c
@@ -515,20 +515,19 @@
 	int ret;
 	struct lp55xx_chip *chip;
 	struct lp55xx_led *led;
-	struct lp55xx_platform_data *pdata;
+	struct lp55xx_platform_data *pdata = dev_get_platdata(&client->dev);
 	struct device_node *np = client->dev.of_node;
 
-	if (!dev_get_platdata(&client->dev)) {
+	if (!pdata) {
 		if (np) {
-			ret = lp55xx_of_populate_pdata(&client->dev, np);
-			if (ret < 0)
-				return ret;
+			pdata = lp55xx_of_populate_pdata(&client->dev, np);
+			if (IS_ERR(pdata))
+				return PTR_ERR(pdata);
 		} else {
 			dev_err(&client->dev, "no platform data\n");
 			return -EINVAL;
 		}
 	}
-	pdata = dev_get_platdata(&client->dev);
 
 	chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
 	if (!chip)
diff --git a/drivers/leds/leds-lp55xx-common.c b/drivers/leds/leds-lp55xx-common.c
index 96d51e9..59b7683 100644
--- a/drivers/leds/leds-lp55xx-common.c
+++ b/drivers/leds/leds-lp55xx-common.c
@@ -543,7 +543,8 @@
 }
 EXPORT_SYMBOL_GPL(lp55xx_unregister_sysfs);
 
-int lp55xx_of_populate_pdata(struct device *dev, struct device_node *np)
+struct lp55xx_platform_data *lp55xx_of_populate_pdata(struct device *dev,
+						      struct device_node *np)
 {
 	struct device_node *child;
 	struct lp55xx_platform_data *pdata;
@@ -553,17 +554,17 @@
 
 	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
 	if (!pdata)
-		return -ENOMEM;
+		return ERR_PTR(-ENOMEM);
 
 	num_channels = of_get_child_count(np);
 	if (num_channels == 0) {
 		dev_err(dev, "no LED channels\n");
-		return -EINVAL;
+		return ERR_PTR(-EINVAL);
 	}
 
 	cfg = devm_kzalloc(dev, sizeof(*cfg) * num_channels, GFP_KERNEL);
 	if (!cfg)
-		return -ENOMEM;
+		return ERR_PTR(-ENOMEM);
 
 	pdata->led_config = &cfg[0];
 	pdata->num_channels = num_channels;
@@ -588,9 +589,7 @@
 	/* LP8501 specific */
 	of_property_read_u8(np, "pwr-sel", (u8 *)&pdata->pwr_sel);
 
-	dev->platform_data = pdata;
-
-	return 0;
+	return pdata;
 }
 EXPORT_SYMBOL_GPL(lp55xx_of_populate_pdata);
 
diff --git a/drivers/leds/leds-lp55xx-common.h b/drivers/leds/leds-lp55xx-common.h
index cceab48..c7f1e61 100644
--- a/drivers/leds/leds-lp55xx-common.h
+++ b/drivers/leds/leds-lp55xx-common.h
@@ -202,7 +202,7 @@
 extern void lp55xx_unregister_sysfs(struct lp55xx_chip *chip);
 
 /* common device tree population function */
-extern int lp55xx_of_populate_pdata(struct device *dev,
-				    struct device_node *np);
+extern struct lp55xx_platform_data
+*lp55xx_of_populate_pdata(struct device *dev, struct device_node *np);
 
 #endif /* _LEDS_LP55XX_COMMON_H */
diff --git a/drivers/leds/leds-lp8501.c b/drivers/leds/leds-lp8501.c
index d3098e3..3f54f6f 100644
--- a/drivers/leds/leds-lp8501.c
+++ b/drivers/leds/leds-lp8501.c
@@ -308,20 +308,19 @@
 	int ret;
 	struct lp55xx_chip *chip;
 	struct lp55xx_led *led;
-	struct lp55xx_platform_data *pdata;
+	struct lp55xx_platform_data *pdata = dev_get_platdata(&client->dev);
 	struct device_node *np = client->dev.of_node;
 
-	if (!dev_get_platdata(&client->dev)) {
+	if (!pdata) {
 		if (np) {
-			ret = lp55xx_of_populate_pdata(&client->dev, np);
-			if (ret < 0)
-				return ret;
+			pdata = lp55xx_of_populate_pdata(&client->dev, np);
+			if (IS_ERR(pdata))
+				return PTR_ERR(pdata);
 		} else {
 			dev_err(&client->dev, "no platform data\n");
 			return -EINVAL;
 		}
 	}
-	pdata = dev_get_platdata(&client->dev);
 
 	chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
 	if (!chip)
diff --git a/drivers/leds/leds-lp8860.c b/drivers/leds/leds-lp8860.c
index 8c2b7fb..79f0843 100644
--- a/drivers/leds/leds-lp8860.c
+++ b/drivers/leds/leds-lp8860.c
@@ -302,7 +302,7 @@
 	return ret;
 }
 
-static struct reg_default lp8860_reg_defs[] = {
+static const struct reg_default lp8860_reg_defs[] = {
 	{ LP8860_DISP_CL1_BRT_MSB, 0x00},
 	{ LP8860_DISP_CL1_BRT_LSB, 0x00},
 	{ LP8860_DISP_CL1_CURR_MSB, 0x00},
@@ -332,7 +332,7 @@
 	.cache_type = REGCACHE_NONE,
 };
 
-static struct reg_default lp8860_eeprom_defs[] = {
+static const struct reg_default lp8860_eeprom_defs[] = {
 	{ LP8860_EEPROM_REG_0, 0x00 },
 	{ LP8860_EEPROM_REG_1, 0x00 },
 	{ LP8860_EEPROM_REG_2, 0x00 },
diff --git a/drivers/leds/leds-ns2.c b/drivers/leds/leds-ns2.c
index 1fd6adb..b33514d 100644
--- a/drivers/leds/leds-ns2.c
+++ b/drivers/leds/leds-ns2.c
@@ -31,50 +31,38 @@
 #include <linux/platform_data/leds-kirkwood-ns2.h>
 #include <linux/of.h>
 #include <linux/of_gpio.h>
+#include "leds.h"
 
 /*
- * The Network Space v2 dual-GPIO LED is wired to a CPLD and can blink in
- * relation with the SATA activity. This capability is exposed through the
- * "sata" sysfs attribute.
- *
- * The following array detail the different LED registers and the combination
- * of their possible values:
- *
- *  cmd_led   |  slow_led  | /SATA active | LED state
- *            |            |              |
- *     1      |     0      |      x       |  off
- *     -      |     1      |      x       |  on
- *     0      |     0      |      1       |  on
- *     0      |     0      |      0       |  blink (rate 300ms)
+ * The Network Space v2 dual-GPIO LED is wired to a CPLD. Three different LED
+ * modes are available: off, on and SATA activity blinking. The LED modes are
+ * controlled through two GPIOs (command and slow): each combination of values
+ * for the command/slow GPIOs corresponds to a LED mode.
  */
 
-enum ns2_led_modes {
-	NS_V2_LED_OFF,
-	NS_V2_LED_ON,
-	NS_V2_LED_SATA,
-};
-
-struct ns2_led_mode_value {
-	enum ns2_led_modes	mode;
-	int			cmd_level;
-	int			slow_level;
-};
-
-static struct ns2_led_mode_value ns2_led_modval[] = {
-	{ NS_V2_LED_OFF	, 1, 0 },
-	{ NS_V2_LED_ON	, 0, 1 },
-	{ NS_V2_LED_ON	, 1, 1 },
-	{ NS_V2_LED_SATA, 0, 0 },
-};
-
 struct ns2_led_data {
 	struct led_classdev	cdev;
 	unsigned		cmd;
 	unsigned		slow;
+	bool			can_sleep;
+	int			mode_index;
 	unsigned char		sata; /* True when SATA mode active. */
 	rwlock_t		rw_lock; /* Lock GPIOs. */
+	struct work_struct	work;
+	int			num_modes;
+	struct ns2_led_modval	*modval;
 };
 
+static void ns2_led_work(struct work_struct *work)
+{
+	struct ns2_led_data *led_dat =
+		container_of(work, struct ns2_led_data, work);
+	int i = led_dat->mode_index;
+
+	gpio_set_value_cansleep(led_dat->cmd, led_dat->modval[i].cmd_level);
+	gpio_set_value_cansleep(led_dat->slow, led_dat->modval[i].slow_level);
+}
+
 static int ns2_led_get_mode(struct ns2_led_data *led_dat,
 			    enum ns2_led_modes *mode)
 {
@@ -83,22 +71,18 @@
 	int cmd_level;
 	int slow_level;
 
-	read_lock_irq(&led_dat->rw_lock);
+	cmd_level = gpio_get_value_cansleep(led_dat->cmd);
+	slow_level = gpio_get_value_cansleep(led_dat->slow);
 
-	cmd_level = gpio_get_value(led_dat->cmd);
-	slow_level = gpio_get_value(led_dat->slow);
-
-	for (i = 0; i < ARRAY_SIZE(ns2_led_modval); i++) {
-		if (cmd_level == ns2_led_modval[i].cmd_level &&
-		    slow_level == ns2_led_modval[i].slow_level) {
-			*mode = ns2_led_modval[i].mode;
+	for (i = 0; i < led_dat->num_modes; i++) {
+		if (cmd_level == led_dat->modval[i].cmd_level &&
+		    slow_level == led_dat->modval[i].slow_level) {
+			*mode = led_dat->modval[i].mode;
 			ret = 0;
 			break;
 		}
 	}
 
-	read_unlock_irq(&led_dat->rw_lock);
-
 	return ret;
 }
 
@@ -106,19 +90,32 @@
 			     enum ns2_led_modes mode)
 {
 	int i;
+	bool found = false;
 	unsigned long flags;
 
+	for (i = 0; i < led_dat->num_modes; i++)
+		if (mode == led_dat->modval[i].mode) {
+			found = true;
+			break;
+		}
+
+	if (!found)
+		return;
+
 	write_lock_irqsave(&led_dat->rw_lock, flags);
 
-	for (i = 0; i < ARRAY_SIZE(ns2_led_modval); i++) {
-		if (mode == ns2_led_modval[i].mode) {
-			gpio_set_value(led_dat->cmd,
-				       ns2_led_modval[i].cmd_level);
-			gpio_set_value(led_dat->slow,
-				       ns2_led_modval[i].slow_level);
-		}
+	if (!led_dat->can_sleep) {
+		gpio_set_value(led_dat->cmd,
+			       led_dat->modval[i].cmd_level);
+		gpio_set_value(led_dat->slow,
+			       led_dat->modval[i].slow_level);
+		goto exit_unlock;
 	}
 
+	led_dat->mode_index = i;
+	schedule_work(&led_dat->work);
+
+exit_unlock:
 	write_unlock_irqrestore(&led_dat->rw_lock, flags);
 }
 
@@ -148,7 +145,6 @@
 		container_of(led_cdev, struct ns2_led_data, cdev);
 	int ret;
 	unsigned long enable;
-	enum ns2_led_modes mode;
 
 	ret = kstrtoul(buff, 10, &enable);
 	if (ret < 0)
@@ -157,19 +153,19 @@
 	enable = !!enable;
 
 	if (led_dat->sata == enable)
-		return count;
-
-	ret = ns2_led_get_mode(led_dat, &mode);
-	if (ret < 0)
-		return ret;
-
-	if (enable && mode == NS_V2_LED_ON)
-		ns2_led_set_mode(led_dat, NS_V2_LED_SATA);
-	if (!enable && mode == NS_V2_LED_SATA)
-		ns2_led_set_mode(led_dat, NS_V2_LED_ON);
+		goto exit;
 
 	led_dat->sata = enable;
 
+	if (!led_get_brightness(led_cdev))
+		goto exit;
+
+	if (enable)
+		ns2_led_set_mode(led_dat, NS_V2_LED_SATA);
+	else
+		ns2_led_set_mode(led_dat, NS_V2_LED_ON);
+
+exit:
 	return count;
 }
 
@@ -199,7 +195,7 @@
 	enum ns2_led_modes mode;
 
 	ret = devm_gpio_request_one(&pdev->dev, template->cmd,
-			gpio_get_value(template->cmd) ?
+			gpio_get_value_cansleep(template->cmd) ?
 			GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW,
 			template->name);
 	if (ret) {
@@ -209,7 +205,7 @@
 	}
 
 	ret = devm_gpio_request_one(&pdev->dev, template->slow,
-			gpio_get_value(template->slow) ?
+			gpio_get_value_cansleep(template->slow) ?
 			GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW,
 			template->name);
 	if (ret) {
@@ -228,6 +224,10 @@
 	led_dat->cdev.groups = ns2_led_groups;
 	led_dat->cmd = template->cmd;
 	led_dat->slow = template->slow;
+	led_dat->can_sleep = gpio_cansleep(led_dat->cmd) |
+				gpio_cansleep(led_dat->slow);
+	led_dat->modval = template->modval;
+	led_dat->num_modes = template->num_modes;
 
 	ret = ns2_led_get_mode(led_dat, &mode);
 	if (ret < 0)
@@ -238,6 +238,8 @@
 	led_dat->cdev.brightness =
 		(mode == NS_V2_LED_OFF) ? LED_OFF : LED_FULL;
 
+	INIT_WORK(&led_dat->work, ns2_led_work);
+
 	ret = led_classdev_register(&pdev->dev, &led_dat->cdev);
 	if (ret < 0)
 		return ret;
@@ -248,6 +250,7 @@
 static void delete_ns2_led(struct ns2_led_data *led_dat)
 {
 	led_classdev_unregister(&led_dat->cdev);
+	cancel_work_sync(&led_dat->work);
 }
 
 #ifdef CONFIG_OF_GPIO
@@ -259,9 +262,8 @@
 {
 	struct device_node *np = dev->of_node;
 	struct device_node *child;
-	struct ns2_led *leds;
+	struct ns2_led *led, *leds;
 	int num_leds = 0;
-	int i = 0;
 
 	num_leds = of_get_child_count(np);
 	if (!num_leds)
@@ -272,26 +274,57 @@
 	if (!leds)
 		return -ENOMEM;
 
+	led = leds;
 	for_each_child_of_node(np, child) {
 		const char *string;
-		int ret;
+		int ret, i, num_modes;
+		struct ns2_led_modval *modval;
 
 		ret = of_get_named_gpio(child, "cmd-gpio", 0);
 		if (ret < 0)
 			return ret;
-		leds[i].cmd = ret;
+		led->cmd = ret;
 		ret = of_get_named_gpio(child, "slow-gpio", 0);
 		if (ret < 0)
 			return ret;
-		leds[i].slow = ret;
+		led->slow = ret;
 		ret = of_property_read_string(child, "label", &string);
-		leds[i].name = (ret == 0) ? string : child->name;
+		led->name = (ret == 0) ? string : child->name;
 		ret = of_property_read_string(child, "linux,default-trigger",
 					      &string);
 		if (ret == 0)
-			leds[i].default_trigger = string;
+			led->default_trigger = string;
 
-		i++;
+		ret = of_property_count_u32_elems(child, "modes-map");
+		if (ret < 0 || ret % 3) {
+			dev_err(dev,
+				"Missing or malformed modes-map property\n");
+			return -EINVAL;
+		}
+
+		num_modes = ret / 3;
+		modval = devm_kzalloc(dev,
+				      num_modes * sizeof(struct ns2_led_modval),
+				      GFP_KERNEL);
+		if (!modval)
+			return -ENOMEM;
+
+		for (i = 0; i < num_modes; i++) {
+			of_property_read_u32_index(child,
+						"modes-map", 3 * i,
+						(u32 *) &modval[i].mode);
+			of_property_read_u32_index(child,
+						"modes-map", 3 * i + 1,
+						(u32 *) &modval[i].cmd_level);
+			of_property_read_u32_index(child,
+						"modes-map", 3 * i + 2,
+						(u32 *) &modval[i].slow_level);
+		}
+
+		led->num_modes = num_modes;
+		led->modval = modval;
+
+		led++;
 	}
 
 	pdata->leds = leds;
diff --git a/drivers/leds/leds-pca955x.c b/drivers/leds/leds-pca955x.c
index c3a08b6..b775e1e 100644
--- a/drivers/leds/leds-pca955x.c
+++ b/drivers/leds/leds-pca955x.c
@@ -379,7 +379,6 @@
 static struct i2c_driver pca955x_driver = {
 	.driver = {
 		.name	= "leds-pca955x",
-		.owner	= THIS_MODULE,
 	},
 	.probe	= pca955x_probe,
 	.remove	= pca955x_remove,
diff --git a/drivers/leds/leds-pca963x.c b/drivers/leds/leds-pca963x.c
index bee3e1a..41f269f 100644
--- a/drivers/leds/leds-pca963x.c
+++ b/drivers/leds/leds-pca963x.c
@@ -332,6 +332,7 @@
 	{ .compatible = "nxp,pca9635", },
 	{},
 };
+MODULE_DEVICE_TABLE(of, of_pca963x_match);
 #else
 static struct pca963x_platform_data *
 pca963x_dt_init(struct i2c_client *client, struct pca963x_chipdef *chip)
@@ -458,7 +459,6 @@
 static struct i2c_driver pca963x_driver = {
 	.driver = {
 		.name	= "leds-pca963x",
-		.owner	= THIS_MODULE,
 		.of_match_table = of_match_ptr(of_pca963x_match),
 	},
 	.probe	= pca963x_probe,
diff --git a/drivers/leds/leds-syscon.c b/drivers/leds/leds-syscon.c
index d1660b0..b88900d 100644
--- a/drivers/leds/leds-syscon.c
+++ b/drivers/leds/leds-syscon.c
@@ -83,9 +83,9 @@
 		return -ENODEV;
 	}
 	map = syscon_node_to_regmap(parent->of_node);
-	if (!map) {
+	if (IS_ERR(map)) {
 		dev_err(dev, "no regmap for syscon LED parent\n");
-		return -ENODEV;
+		return PTR_ERR(map);
 	}
 
 	sled = devm_kzalloc(dev, sizeof(*sled), GFP_KERNEL);
diff --git a/drivers/leds/leds-tca6507.c b/drivers/leds/leds-tca6507.c
index 20fa8e7..edbecc4 100644
--- a/drivers/leds/leds-tca6507.c
+++ b/drivers/leds/leds-tca6507.c
@@ -735,6 +735,7 @@
 	{ .compatible = "ti,tca6507", },
 	{},
 };
+MODULE_DEVICE_TABLE(of, of_tca6507_leds_match);
 
 #else
 static struct tca6507_platform_data *
@@ -830,7 +831,6 @@
 static struct i2c_driver tca6507_driver = {
 	.driver   = {
 		.name    = "leds-tca6507",
-		.owner   = THIS_MODULE,
 		.of_match_table = of_match_ptr(of_tca6507_leds_match),
 	},
 	.probe    = tca6507_probe,
diff --git a/drivers/leds/leds-tlc591xx.c b/drivers/leds/leds-tlc591xx.c
index de16c29..b806eca 100644
--- a/drivers/leds/leds-tlc591xx.c
+++ b/drivers/leds/leds-tlc591xx.c
@@ -231,10 +231,6 @@
 	if (!count || count > tlc591xx->max_leds)
 		return -EINVAL;
 
-	if (!i2c_check_functionality(client->adapter,
-				     I2C_FUNC_SMBUS_BYTE_DATA))
-		return -EIO;
-
 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;
diff --git a/drivers/leds/trigger/Kconfig b/drivers/leds/trigger/Kconfig
index 49794b4..5bda6a9 100644
--- a/drivers/leds/trigger/Kconfig
+++ b/drivers/leds/trigger/Kconfig
@@ -72,7 +72,7 @@
 config LEDS_TRIGGER_GPIO
 	tristate "LED GPIO Trigger"
 	depends on LEDS_TRIGGERS
-	depends on GPIOLIB
+	depends on GPIOLIB || COMPILE_TEST
 	help
 	  This allows LEDs to be controlled by gpio events. It's good
 	  when using gpios as switches and triggering the needed LEDs
diff --git a/include/dt-bindings/leds/leds-ns2.h b/include/dt-bindings/leds/leds-ns2.h
new file mode 100644
index 0000000..491c5f9
--- /dev/null
+++ b/include/dt-bindings/leds/leds-ns2.h
@@ -0,0 +1,8 @@
+#ifndef _DT_BINDINGS_LEDS_NS2_H
+#define _DT_BINDINGS_LEDS_NS2_H
+
+#define NS_V2_LED_OFF	0
+#define NS_V2_LED_ON	1
+#define NS_V2_LED_SATA	2
+
+#endif
diff --git a/include/linux/platform_data/leds-kirkwood-ns2.h b/include/linux/platform_data/leds-kirkwood-ns2.h
index 6a9fed5..eb8a686 100644
--- a/include/linux/platform_data/leds-kirkwood-ns2.h
+++ b/include/linux/platform_data/leds-kirkwood-ns2.h
@@ -9,11 +9,25 @@
 #ifndef __LEDS_KIRKWOOD_NS2_H
 #define __LEDS_KIRKWOOD_NS2_H
 
+enum ns2_led_modes {
+	NS_V2_LED_OFF,
+	NS_V2_LED_ON,
+	NS_V2_LED_SATA,
+};
+
+struct ns2_led_modval {
+	enum ns2_led_modes	mode;
+	int			cmd_level;
+	int			slow_level;
+};
+
 struct ns2_led {
 	const char	*name;
 	const char	*default_trigger;
 	unsigned	cmd;
 	unsigned	slow;
+	int		num_modes;
+	struct ns2_led_modval *modval;
 };
 
 struct ns2_led_platform_data {