diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
index 2708056..45a32da 100644
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -453,6 +453,7 @@
 			if (urb->interval > (1 << 15))
 				return -EINVAL;
 			max = 1 << 15;
+			break;
 		case USB_SPEED_WIRELESS:
 			if (urb->interval > 16)
 				return -EINVAL;
diff --git a/include/linux/usb.h b/include/linux/usb.h
index 8c9f053..ce1323c 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -1055,7 +1055,8 @@
  * @number_of_packets: Lists the number of ISO transfer buffers.
  * @interval: Specifies the polling interval for interrupt or isochronous
  *	transfers.  The units are frames (milliseconds) for full and low
- *	speed devices, and microframes (1/8 millisecond) for highspeed ones.
+ *	speed devices, and microframes (1/8 millisecond) for highspeed
+ *	and SuperSpeed devices.
  * @error_count: Returns the number of ISO transfers that reported errors.
  * @context: For use in completion functions.  This normally points to
  *	request-specific driver context.
@@ -1286,9 +1287,16 @@
  *
  * Initializes a interrupt urb with the proper information needed to submit
  * it to a device.
- * Note that high speed interrupt endpoints use a logarithmic encoding of
- * the endpoint interval, and express polling intervals in microframes
- * (eight per millisecond) rather than in frames (one per millisecond).
+ *
+ * Note that High Speed and SuperSpeed interrupt endpoints use a logarithmic
+ * encoding of the endpoint interval, and express polling intervals in
+ * microframes (eight per millisecond) rather than in frames (one per
+ * millisecond).
+ *
+ * Wireless USB also uses the logarithmic encoding, but specifies it in units of
+ * 128us instead of 125us.  For Wireless USB devices, the interval is passed
+ * through to the host controller, rather than being translated into microframe
+ * units.
  */
 static inline void usb_fill_int_urb(struct urb *urb,
 				    struct usb_device *dev,
@@ -1305,7 +1313,7 @@
 	urb->transfer_buffer_length = buffer_length;
 	urb->complete = complete_fn;
 	urb->context = context;
-	if (dev->speed == USB_SPEED_HIGH)
+	if (dev->speed == USB_SPEED_HIGH || dev->speed == USB_SPEED_SUPER)
 		urb->interval = 1 << (interval - 1);
 	else
 		urb->interval = interval;