blob: 962a910a6f5ca63703ffac5ee85eba1f6078060a [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include "kirkwood.dtsi"
#include "kirkwood-6281.dtsi"
/ {
model = "RaidSonic ICY BOX IB-NAS62x0 (Rev B)";
compatible = "raidsonic,ib-nas6210-b", "raidsonic,ib-nas6220-b", "raidsonic,ib-nas6210", "raidsonic,ib-nas6220", "raidsonic,ib-nas62x0", "marvell,kirkwood-88f6281", "marvell,kirkwood";
memory {
device_type = "memory";
reg = <0x00000000 0x10000000>;
};
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk";
stdout-path = &uart0;
};
ocp@f1000000 {
pinctrl: pin-controller@10000 {
pmx_led_os_red: pmx-led-os-red {
marvell,pins = "mpp22";
marvell,function = "gpio";
};
pmx_power_off: pmx-power-off {
marvell,pins = "mpp24";
marvell,function = "gpio";
};
pmx_led_os_green: pmx-led-os-green {
marvell,pins = "mpp25";
marvell,function = "gpio";
};
pmx_led_usb_transfer: pmx-led-usb-transfer {
marvell,pins = "mpp27";
marvell,function = "gpio";
};
pmx_button_reset: pmx-button-reset {
marvell,pins = "mpp28";
marvell,function = "gpio";
};
pmx_button_usb_copy: pmx-button-usb-copy {
marvell,pins = "mpp29";
marvell,function = "gpio";
};
};
serial@12000 {
status = "okay";
};
sata@80000 {
status = "okay";
nr-ports = <2>;
};
};
gpio_keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&pmx_button_reset &pmx_button_usb_copy>;
pinctrl-names = "default";
copy {
label = "USB Copy";
linux,code = <KEY_COPY>;
gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
};
reset {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
};
};
gpio-leds {
compatible = "gpio-leds";
pinctrl-0 = <&pmx_led_os_red &pmx_led_os_green
&pmx_led_usb_transfer>;
pinctrl-names = "default";
green-os {
label = "ib62x0:green:os";
gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
red-os {
label = "ib62x0:red:os";
gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
};
usb-copy {
label = "ib62x0:red:usb_copy";
gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
};
};
gpio_poweroff {
compatible = "gpio-poweroff";
pinctrl-0 = <&pmx_power_off>;
pinctrl-names = "default";
gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
};
};
&nand {
status = "okay";
partition@0 {
label = "u-boot";
reg = <0x0000000 0xe0000>;
};
partition@e0000 {
label = "u-boot environment";
reg = <0xe0000 0x20000>;
};
partition@100000 {
label = "uImage";
reg = <0x0100000 0x600000>;
};
partition@700000 {
label = "root";
reg = <0x0700000 0xf900000>;
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@8 {
reg = <8>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};