Merge branch 'master'
diff --git a/Documentation/filesystems/ntfs.txt b/Documentation/filesystems/ntfs.txt
index 614de31..2511685 100644
--- a/Documentation/filesystems/ntfs.txt
+++ b/Documentation/filesystems/ntfs.txt
@@ -457,6 +457,12 @@
Note, a technical ChangeLog aimed at kernel hackers is in fs/ntfs/ChangeLog.
+2.1.26:
+ - Implement support for sector sizes above 512 bytes (up to the maximum
+ supported by NTFS which is 4096 bytes).
+ - Enhance support for NTFS volumes which were supported by Windows but
+ not by Linux due to invalid attribute list attribute flags.
+ - A few minor updates and bug fixes.
2.1.25:
- Write support is now extended with write(2) being able to both
overwrite existing file data and to extend files. Also, if a write
diff --git a/Documentation/filesystems/tmpfs.txt b/Documentation/filesystems/tmpfs.txt
index 8a15541..1773106 100644
--- a/Documentation/filesystems/tmpfs.txt
+++ b/Documentation/filesystems/tmpfs.txt
@@ -92,6 +92,15 @@
a range being two hyphen-separated decimal numbers, the smallest and
largest node numbers in the range. For example, mpol=bind:0-3,5,7,9-15
+Note that trying to mount a tmpfs with an mpol option will fail if the
+running kernel does not support NUMA; and will fail if its nodelist
+specifies a node >= MAX_NUMNODES. If your system relies on that tmpfs
+being mounted, but from time to time runs a kernel built without NUMA
+capability (perhaps a safe recovery kernel), or configured to support
+fewer nodes, then it is advisable to omit the mpol option from automatic
+mount options. It can be added later, when the tmpfs is already mounted
+on MountPoint, by 'mount -o remount,mpol=Policy:NodeList MountPoint'.
+
To specify the initial root directory you can use the following mount
options:
diff --git a/Documentation/x86_64/boot-options.txt b/Documentation/x86_64/boot-options.txt
index 153740f..1921353 100644
--- a/Documentation/x86_64/boot-options.txt
+++ b/Documentation/x86_64/boot-options.txt
@@ -52,6 +52,10 @@
apicmaintimer. Useful when your PIT timer is totally
broken.
+ disable_8254_timer / enable_8254_timer
+ Enable interrupt 0 timer routing over the 8254 in addition to over
+ the IO-APIC. The kernel tries to set a sensible default.
+
Early Console
syntax: earlyprintk=vga
diff --git a/Makefile b/Makefile
index 77a448c..46eea76 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 16
-EXTRAVERSION =-rc4
+EXTRAVERSION =-rc5
NAME=Sliding Snow Leopard
# *DOCUMENTATION*
diff --git a/arch/arm/mach-at91rm9200/gpio.c b/arch/arm/mach-at91rm9200/gpio.c
index a9f718b..0e396fe 100644
--- a/arch/arm/mach-at91rm9200/gpio.c
+++ b/arch/arm/mach-at91rm9200/gpio.c
@@ -274,8 +274,18 @@
gpio = &irq_desc[pin];
while (isr) {
- if (isr & 1)
- gpio->handle(pin, gpio, regs);
+ if (isr & 1) {
+ if (unlikely(gpio->disable_depth)) {
+ /*
+ * The core ARM interrupt handler lazily disables IRQs so
+ * another IRQ must be generated before it actually gets
+ * here to be disabled on the GPIO controller.
+ */
+ gpio_irq_mask(pin);
+ }
+ else
+ gpio->handle(pin, gpio, regs);
+ }
pin++;
gpio++;
isr >>= 1;
diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig
index 0afec85..5b1a7d4 100644
--- a/arch/i386/Kconfig
+++ b/arch/i386/Kconfig
@@ -733,7 +733,7 @@
config HOTPLUG_CPU
bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
- depends on SMP && HOTPLUG && EXPERIMENTAL
+ depends on SMP && HOTPLUG && EXPERIMENTAL && !X86_VOYAGER
---help---
Say Y here to experiment with turning CPUs off and on. CPUs
can be controlled through /sys/devices/system/cpu.
@@ -1060,6 +1060,7 @@
config KPROBES
bool "Kprobes (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && MODULES
help
Kprobes allows you to trap at almost any kernel address and
execute a callback function. register_kprobe() establishes
diff --git a/arch/i386/kernel/Makefile b/arch/i386/kernel/Makefile
index 60c3f76..53bb9a7 100644
--- a/arch/i386/kernel/Makefile
+++ b/arch/i386/kernel/Makefile
@@ -7,7 +7,7 @@
obj-y := process.o semaphore.o signal.o entry.o traps.o irq.o \
ptrace.o time.o ioport.o ldt.o setup.o i8259.o sys_i386.o \
pci-dma.o i386_ksyms.o i387.o dmi_scan.o bootflag.o \
- quirks.o i8237.o
+ quirks.o i8237.o topology.o
obj-y += cpu/
obj-y += timers/
diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c
index 79577f0..8309a7b 100644
--- a/arch/i386/kernel/acpi/boot.c
+++ b/arch/i386/kernel/acpi/boot.c
@@ -44,9 +44,6 @@
extern int gsi_irq_sharing(int gsi);
#include <asm/proto.h>
-static inline int acpi_madt_oem_check(char *oem_id, char *oem_table_id) { return 0; }
-
-
#else /* X86 */
#ifdef CONFIG_X86_LOCAL_APIC
diff --git a/arch/i386/kernel/cpu/common.c b/arch/i386/kernel/cpu/common.c
index 7eb9213..4ecd4b3 100644
--- a/arch/i386/kernel/cpu/common.c
+++ b/arch/i386/kernel/cpu/common.c
@@ -4,6 +4,7 @@
#include <linux/smp.h>
#include <linux/module.h>
#include <linux/percpu.h>
+#include <linux/bootmem.h>
#include <asm/semaphore.h>
#include <asm/processor.h>
#include <asm/i387.h>
@@ -18,6 +19,9 @@
#include "cpu.h"
+DEFINE_PER_CPU(struct Xgt_desc_struct, cpu_gdt_descr);
+EXPORT_PER_CPU_SYMBOL(cpu_gdt_descr);
+
DEFINE_PER_CPU(unsigned char, cpu_16bit_stack[CPU_16BIT_STACK_SIZE]);
EXPORT_PER_CPU_SYMBOL(cpu_16bit_stack);
@@ -571,8 +575,9 @@
int cpu = smp_processor_id();
struct tss_struct * t = &per_cpu(init_tss, cpu);
struct thread_struct *thread = ¤t->thread;
- struct desc_struct *gdt = get_cpu_gdt_table(cpu);
+ struct desc_struct *gdt;
__u32 stk16_off = (__u32)&per_cpu(cpu_16bit_stack, cpu);
+ struct Xgt_desc_struct *cpu_gdt_descr = &per_cpu(cpu_gdt_descr, cpu);
if (cpu_test_and_set(cpu, cpu_initialized)) {
printk(KERN_WARNING "CPU#%d already initialized!\n", cpu);
@@ -590,6 +595,25 @@
}
/*
+ * This is a horrible hack to allocate the GDT. The problem
+ * is that cpu_init() is called really early for the boot CPU
+ * (and hence needs bootmem) but much later for the secondary
+ * CPUs, when bootmem will have gone away
+ */
+ if (NODE_DATA(0)->bdata->node_bootmem_map) {
+ gdt = (struct desc_struct *)alloc_bootmem_pages(PAGE_SIZE);
+ /* alloc_bootmem_pages panics on failure, so no check */
+ memset(gdt, 0, PAGE_SIZE);
+ } else {
+ gdt = (struct desc_struct *)get_zeroed_page(GFP_KERNEL);
+ if (unlikely(!gdt)) {
+ printk(KERN_CRIT "CPU%d failed to allocate GDT\n", cpu);
+ for (;;)
+ local_irq_enable();
+ }
+ }
+
+ /*
* Initialize the per-CPU GDT with the boot GDT,
* and set up the GDT descriptor:
*/
@@ -601,10 +625,10 @@
((((__u64)stk16_off) << 32) & 0xff00000000000000ULL) |
(CPU_16BIT_STACK_SIZE - 1);
- cpu_gdt_descr[cpu].size = GDT_SIZE - 1;
- cpu_gdt_descr[cpu].address = (unsigned long)gdt;
+ cpu_gdt_descr->size = GDT_SIZE - 1;
+ cpu_gdt_descr->address = (unsigned long)gdt;
- load_gdt(&cpu_gdt_descr[cpu]);
+ load_gdt(cpu_gdt_descr);
load_idt(&idt_descr);
/*
diff --git a/arch/i386/kernel/efi.c b/arch/i386/kernel/efi.c
index ecad519..e3e42fd 100644
--- a/arch/i386/kernel/efi.c
+++ b/arch/i386/kernel/efi.c
@@ -103,17 +103,19 @@
*/
local_flush_tlb();
- cpu_gdt_descr[0].address = __pa(cpu_gdt_descr[0].address);
- load_gdt((struct Xgt_desc_struct *) __pa(&cpu_gdt_descr[0]));
+ per_cpu(cpu_gdt_descr, 0).address =
+ __pa(per_cpu(cpu_gdt_descr, 0).address);
+ load_gdt((struct Xgt_desc_struct *)__pa(&per_cpu(cpu_gdt_descr, 0)));
}
static void efi_call_phys_epilog(void)
{
unsigned long cr4;
- cpu_gdt_descr[0].address =
- (unsigned long) __va(cpu_gdt_descr[0].address);
- load_gdt(&cpu_gdt_descr[0]);
+ per_cpu(cpu_gdt_descr, 0).address =
+ (unsigned long)__va(per_cpu(cpu_gdt_descr, 0).address);
+ load_gdt((struct Xgt_desc_struct *)__va(&per_cpu(cpu_gdt_descr, 0)));
+
cr4 = read_cr4();
if (cr4 & X86_CR4_PSE) {
diff --git a/arch/i386/kernel/head.S b/arch/i386/kernel/head.S
index 2bee649..e0b7c63 100644
--- a/arch/i386/kernel/head.S
+++ b/arch/i386/kernel/head.S
@@ -534,5 +534,3 @@
.quad 0x0000000000000000 /* 0xf0 - unused */
.quad 0x0000000000000000 /* 0xf8 - GDT entry 31: double-fault TSS */
- /* Be sure this is zeroed to avoid false validations in Xen */
- .fill PAGE_SIZE_asm / 8 - GDT_ENTRIES,8,0
diff --git a/arch/i386/kernel/i386_ksyms.c b/arch/i386/kernel/i386_ksyms.c
index 3999bec..0553250 100644
--- a/arch/i386/kernel/i386_ksyms.c
+++ b/arch/i386/kernel/i386_ksyms.c
@@ -3,8 +3,6 @@
#include <asm/checksum.h>
#include <asm/desc.h>
-EXPORT_SYMBOL_GPL(cpu_gdt_descr);
-
EXPORT_SYMBOL(__down_failed);
EXPORT_SYMBOL(__down_failed_interruptible);
EXPORT_SYMBOL(__down_failed_trylock);
diff --git a/arch/i386/kernel/io_apic.c b/arch/i386/kernel/io_apic.c
index f2dd218..235822b 100644
--- a/arch/i386/kernel/io_apic.c
+++ b/arch/i386/kernel/io_apic.c
@@ -2566,8 +2566,10 @@
spin_unlock_irqrestore(&ioapic_lock, flags);
/* Sanity check */
- if (reg_00.bits.ID != apic_id)
- panic("IOAPIC[%d]: Unable change apic_id!\n", ioapic);
+ if (reg_00.bits.ID != apic_id) {
+ printk("IOAPIC[%d]: Unable to change apic_id!\n", ioapic);
+ return -1;
+ }
}
apic_printk(APIC_VERBOSE, KERN_INFO
diff --git a/arch/i386/kernel/kprobes.c b/arch/i386/kernel/kprobes.c
index 6483eeb..694a139 100644
--- a/arch/i386/kernel/kprobes.c
+++ b/arch/i386/kernel/kprobes.c
@@ -58,6 +58,11 @@
int __kprobes arch_prepare_kprobe(struct kprobe *p)
{
+ /* insn: must be on special executable page on i386. */
+ p->ainsn.insn = get_insn_slot();
+ if (!p->ainsn.insn)
+ return -ENOMEM;
+
memcpy(p->ainsn.insn, p->addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t));
p->opcode = *p->addr;
return 0;
@@ -77,6 +82,13 @@
(unsigned long) p->addr + sizeof(kprobe_opcode_t));
}
+void __kprobes arch_remove_kprobe(struct kprobe *p)
+{
+ down(&kprobe_mutex);
+ free_insn_slot(p->ainsn.insn);
+ up(&kprobe_mutex);
+}
+
static inline void save_previous_kprobe(struct kprobe_ctlblk *kcb)
{
kcb->prev_kprobe.kp = kprobe_running();
@@ -111,7 +123,7 @@
if (p->opcode == BREAKPOINT_INSTRUCTION)
regs->eip = (unsigned long)p->addr;
else
- regs->eip = (unsigned long)&p->ainsn.insn;
+ regs->eip = (unsigned long)p->ainsn.insn;
}
/* Called with kretprobe_lock held */
@@ -351,7 +363,7 @@
{
unsigned long *tos = (unsigned long *)®s->esp;
unsigned long next_eip = 0;
- unsigned long copy_eip = (unsigned long)&p->ainsn.insn;
+ unsigned long copy_eip = (unsigned long)p->ainsn.insn;
unsigned long orig_eip = (unsigned long)p->addr;
switch (p->ainsn.insn[0]) {
diff --git a/arch/i386/kernel/mpparse.c b/arch/i386/kernel/mpparse.c
index e7609ab..e6e2f43 100644
--- a/arch/i386/kernel/mpparse.c
+++ b/arch/i386/kernel/mpparse.c
@@ -915,6 +915,7 @@
u32 gsi_base)
{
int idx = 0;
+ int tmpid;
if (nr_ioapics >= MAX_IO_APICS) {
printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded "
@@ -935,9 +936,14 @@
set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address);
if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && (boot_cpu_data.x86 < 15))
- mp_ioapics[idx].mpc_apicid = io_apic_get_unique_id(idx, id);
+ tmpid = io_apic_get_unique_id(idx, id);
else
- mp_ioapics[idx].mpc_apicid = id;
+ tmpid = id;
+ if (tmpid == -1) {
+ nr_ioapics--;
+ return;
+ }
+ mp_ioapics[idx].mpc_apicid = tmpid;
mp_ioapics[idx].mpc_apicver = io_apic_get_version(idx);
/*
diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c
index fb00ab7..eba7f53 100644
--- a/arch/i386/kernel/smpboot.c
+++ b/arch/i386/kernel/smpboot.c
@@ -898,12 +898,6 @@
unsigned long start_eip;
unsigned short nmi_high = 0, nmi_low = 0;
- if (!cpu_gdt_descr[cpu].address &&
- !(cpu_gdt_descr[cpu].address = get_zeroed_page(GFP_KERNEL))) {
- printk("Failed to allocate GDT for CPU %d\n", cpu);
- return 1;
- }
-
++cpucount;
/*
diff --git a/arch/i386/mach-default/topology.c b/arch/i386/kernel/topology.c
similarity index 94%
rename from arch/i386/mach-default/topology.c
rename to arch/i386/kernel/topology.c
index b643140..67a0e1b 100644
--- a/arch/i386/mach-default/topology.c
+++ b/arch/i386/kernel/topology.c
@@ -1,12 +1,12 @@
/*
- * arch/i386/mach-generic/topology.c - Populate driverfs with topology information
+ * arch/i386/kernel/topology.c - Populate driverfs with topology information
*
* Written by: Matthew Dobson, IBM Corporation
* Original Code: Paul Dorwin, IBM Corporation, Patrick Mochel, OSDL
*
* Copyright (C) 2002, IBM Corp.
*
- * All rights reserved.
+ * All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -34,7 +34,7 @@
int arch_register_cpu(int num){
struct node *parent = NULL;
-
+
#ifdef CONFIG_NUMA
int node = cpu_to_node(num);
if (node_online(node))
diff --git a/arch/i386/mach-default/Makefile b/arch/i386/mach-default/Makefile
index e95bb02..012fe34 100644
--- a/arch/i386/mach-default/Makefile
+++ b/arch/i386/mach-default/Makefile
@@ -2,4 +2,4 @@
# Makefile for the linux kernel.
#
-obj-y := setup.o topology.o
+obj-y := setup.o
diff --git a/arch/i386/mach-voyager/voyager_basic.c b/arch/i386/mach-voyager/voyager_basic.c
index aa49a33..b584060 100644
--- a/arch/i386/mach-voyager/voyager_basic.c
+++ b/arch/i386/mach-voyager/voyager_basic.c
@@ -23,6 +23,8 @@
#include <linux/delay.h>
#include <linux/reboot.h>
#include <linux/sysrq.h>
+#include <linux/smp.h>
+#include <linux/nodemask.h>
#include <asm/io.h>
#include <asm/voyager.h>
#include <asm/vic.h>
@@ -328,4 +330,3 @@
if (pm_power_off)
pm_power_off();
}
-
diff --git a/arch/i386/mach-voyager/voyager_smp.c b/arch/i386/mach-voyager/voyager_smp.c
index 6e4c3ba..8165626 100644
--- a/arch/i386/mach-voyager/voyager_smp.c
+++ b/arch/i386/mach-voyager/voyager_smp.c
@@ -402,6 +402,7 @@
cpus_addr(phys_cpu_present_map)[0] |= voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK + 1) << 8;
cpus_addr(phys_cpu_present_map)[0] |= voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK + 2) << 16;
cpus_addr(phys_cpu_present_map)[0] |= voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK + 3) << 24;
+ cpu_possible_map = phys_cpu_present_map;
printk("VOYAGER SMP: phys_cpu_present_map = 0x%lx\n", cpus_addr(phys_cpu_present_map)[0]);
/* Here we set up the VIC to enable SMP */
/* enable the CPIs by writing the base vector to their register */
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 845cd09..a85ea9d 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -453,6 +453,7 @@
config KPROBES
bool "Kprobes (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && MODULES
help
Kprobes allows you to trap at almost any kernel address and
execute a callback function. register_kprobe() establishes
diff --git a/arch/m32r/Makefile b/arch/m32r/Makefile
index 983d438..4b3c90b 100644
--- a/arch/m32r/Makefile
+++ b/arch/m32r/Makefile
@@ -12,14 +12,14 @@
ifdef CONFIG_CHIP_VDEC2
cflags-$(CONFIG_ISA_M32R2) += -DNO_FPU -Wa,-bitinst
-aflags-$(CONFIG_ISA_M32R2) += -DNO_FPU -Wa,-bitinst
+aflags-$(CONFIG_ISA_M32R2) += -DNO_FPU -O2 -Wa,-bitinst -Wa,-no-parallel
else
cflags-$(CONFIG_ISA_M32R2) += -DNO_FPU -m32r2
-aflags-$(CONFIG_ISA_M32R2) += -DNO_FPU -m32r2
+aflags-$(CONFIG_ISA_M32R2) += -DNO_FPU -m32r2 -O2
endif
cflags-$(CONFIG_ISA_M32R) += -DNO_FPU
-aflags-$(CONFIG_ISA_M32R) += -DNO_FPU -Wa,-no-bitinst
+aflags-$(CONFIG_ISA_M32R) += -DNO_FPU -O2 -Wa,-no-bitinst
CFLAGS += $(cflags-y)
AFLAGS += $(aflags-y)
diff --git a/arch/m32r/kernel/signal.c b/arch/m32r/kernel/signal.c
index 71763f7..cb33097 100644
--- a/arch/m32r/kernel/signal.c
+++ b/arch/m32r/kernel/signal.c
@@ -36,7 +36,7 @@
asmlinkage int
sys_rt_sigsuspend(sigset_t *unewset, size_t sigsetsize,
unsigned long r2, unsigned long r3, unsigned long r4,
- unsigned long r5, unsigned long r6, struct pt_regs regs)
+ unsigned long r5, unsigned long r6, struct pt_regs *regs)
{
sigset_t saveset, newset;
@@ -54,21 +54,21 @@
recalc_sigpending();
spin_unlock_irq(¤t->sighand->siglock);
- regs.r0 = -EINTR;
+ regs->r0 = -EINTR;
while (1) {
current->state = TASK_INTERRUPTIBLE;
schedule();
- if (do_signal(®s, &saveset))
- return regs.r0;
+ if (do_signal(regs, &saveset))
+ return regs->r0;
}
}
asmlinkage int
sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
unsigned long r2, unsigned long r3, unsigned long r4,
- unsigned long r5, unsigned long r6, struct pt_regs regs)
+ unsigned long r5, unsigned long r6, struct pt_regs *regs)
{
- return do_sigaltstack(uss, uoss, regs.spu);
+ return do_sigaltstack(uss, uoss, regs->spu);
}
@@ -140,11 +140,10 @@
asmlinkage int
sys_rt_sigreturn(unsigned long r0, unsigned long r1,
unsigned long r2, unsigned long r3, unsigned long r4,
- unsigned long r5, unsigned long r6, struct pt_regs regs)
+ unsigned long r5, unsigned long r6, struct pt_regs *regs)
{
- struct rt_sigframe __user *frame = (struct rt_sigframe __user *)regs.spu;
+ struct rt_sigframe __user *frame = (struct rt_sigframe __user *)regs->spu;
sigset_t set;
- stack_t st;
int result;
if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
@@ -158,14 +157,11 @@
recalc_sigpending();
spin_unlock_irq(¤t->sighand->siglock);
- if (restore_sigcontext(®s, &frame->uc.uc_mcontext, &result))
+ if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &result))
goto badframe;
- if (__copy_from_user(&st, &frame->uc.uc_stack, sizeof(st)))
+ if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->spu) == -EFAULT)
goto badframe;
- /* It is more difficult to avoid calling this function than to
- call it and ignore errors. */
- do_sigaltstack(&st, NULL, regs.spu);
return result;
diff --git a/arch/m32r/lib/usercopy.c b/arch/m32r/lib/usercopy.c
index ce16bbe..2d1dd21 100644
--- a/arch/m32r/lib/usercopy.c
+++ b/arch/m32r/lib/usercopy.c
@@ -64,7 +64,7 @@
" .balign 4\n" \
" .long 0b,3b\n" \
".previous" \
- : "=r"(res), "=r"(count), "=&r" (__d0), "=&r" (__d1), \
+ : "=&r"(res), "=&r"(count), "=&r" (__d0), "=&r" (__d1), \
"=&r" (__d2) \
: "i"(-EFAULT), "0"(count), "1"(count), "3"(src), \
"4"(dst) \
@@ -101,7 +101,7 @@
" .balign 4\n" \
" .long 0b,3b\n" \
".previous" \
- : "=r"(res), "=r"(count), "=&r" (__d0), "=&r" (__d1), \
+ : "=&r"(res), "=&r"(count), "=&r" (__d0), "=&r" (__d1), \
"=&r" (__d2) \
: "i"(-EFAULT), "0"(count), "1"(count), "3"(src), \
"4"(dst) \
diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S
index d83e033..2f2dc54 100644
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -626,7 +626,7 @@
sys sys_fstatat64 4
sys sys_unlinkat 3
sys sys_renameat 4 /* 4295 */
- sys sys_linkat 4
+ sys sys_linkat 5
sys sys_symlinkat 3
sys sys_readlinkat 4
sys sys_fchmodat 3
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 80d114a..a834f9e 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -963,7 +963,7 @@
config KPROBES
bool "Kprobes (EXPERIMENTAL)"
- depends on PPC64
+ depends on PPC64 && EXPERIMENTAL && MODULES
help
Kprobes allows you to trap at almost any kernel address and
execute a callback function. register_kprobe() establishes
diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig
index d6fed3f..2c3fd20 100644
--- a/arch/powerpc/configs/g5_defconfig
+++ b/arch/powerpc/configs/g5_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc5
-# Tue Dec 20 15:59:30 2005
+# Linux kernel version: 2.6.16-rc2
+# Fri Feb 10 17:33:08 2006
#
CONFIG_PPC64=y
CONFIG_64BIT=y
@@ -16,6 +16,10 @@
CONFIG_SYSVIPC_COMPAT=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+# CONFIG_PPC_UDBG_16550 is not set
+CONFIG_GENERIC_TBSYNC=y
+# CONFIG_DEFAULT_UIMAGE is not set
#
# Processor support
@@ -26,13 +30,12 @@
CONFIG_ALTIVEC=y
CONFIG_PPC_STD_MMU=y
CONFIG_SMP=y
-CONFIG_NR_CPUS=2
+CONFIG_NR_CPUS=4
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
@@ -47,8 +50,6 @@
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
@@ -58,8 +59,10 @@
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
@@ -68,8 +71,10 @@
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
@@ -112,13 +117,12 @@
CONFIG_PPC_PMAC64=y
# CONFIG_PPC_MAPLE is not set
# CONFIG_PPC_CELL is not set
-CONFIG_PPC_OF=y
CONFIG_U3_DART=y
CONFIG_MPIC=y
# CONFIG_PPC_RTAS is not set
# CONFIG_MMIO_NVRAM is not set
+CONFIG_MPIC_BROKEN_U3=y
# CONFIG_PPC_MPC106 is not set
-CONFIG_GENERIC_TBSYNC=y
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
@@ -151,6 +155,7 @@
CONFIG_IOMMU_VMERGE=y
# CONFIG_HOTPLUG_CPU is not set
CONFIG_KEXEC=y
+# CONFIG_CRASH_DUMP is not set
CONFIG_IRQ_ALL_CPUS=y
# CONFIG_NUMA is not set
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
@@ -202,6 +207,7 @@
#
# Networking options
#
+# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -239,6 +245,7 @@
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NETFILTER_XTABLES is not set
#
# IP: Netfilter Configuration
@@ -255,65 +262,6 @@
CONFIG_IP_NF_AMANDA=m
# CONFIG_IP_NF_PPTP is not set
CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-CONFIG_IP_NF_MATCH_SCTP=m
-# CONFIG_IP_NF_MATCH_DCCP is not set
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_CONNBYTES=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_MATCH_STRING=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_TARGET_NFQUEUE=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
#
# DCCP Configuration (EXPERIMENTAL)
@@ -324,6 +272,11 @@
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
@@ -342,7 +295,6 @@
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
#
# Network testing
@@ -545,13 +497,7 @@
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
@@ -614,7 +560,6 @@
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=y
-# CONFIG_IEEE1394_CMP is not set
#
# I2O device support
@@ -630,6 +575,7 @@
CONFIG_WINDFARM=y
CONFIG_WINDFARM_PM81=y
CONFIG_WINDFARM_PM91=y
+CONFIG_WINDFARM_PM112=y
#
# Network device support
@@ -682,8 +628,9 @@
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
-CONFIG_TIGON3=m
+CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
# CONFIG_MV643XX_ETH is not set
@@ -861,8 +808,7 @@
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_KEYWEST=y
-CONFIG_I2C_PMAC_SMU=y
+CONFIG_I2C_POWERMAC=y
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
@@ -895,6 +841,12 @@
# CONFIG_I2C_DEBUG_CHIP is not set
#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
@@ -961,7 +913,6 @@
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set
@@ -1008,9 +959,10 @@
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
-CONFIG_SND_GENERIC_DRIVER=y
#
# Generic devices
@@ -1024,6 +976,8 @@
#
# PCI devices
#
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
@@ -1032,39 +986,38 @@
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
-# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_YMFPCI is not set
#
# ALSA PowerMac devices
@@ -1136,13 +1089,16 @@
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
+# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
CONFIG_HID_FF=y
CONFIG_HID_PID=y
CONFIG_LOGITECH_FF=y
@@ -1159,6 +1115,7 @@
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
@@ -1207,6 +1164,7 @@
# CONFIG_USB_SERIAL_AIRPRIME is not set
# CONFIG_USB_SERIAL_ANYDATA is not set
CONFIG_USB_SERIAL_BELKIN=m
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
# CONFIG_USB_SERIAL_CP2101 is not set
CONFIG_USB_SERIAL_CYPRESS_M8=m
@@ -1288,6 +1246,10 @@
#
#
+# EDAC - error detection and reporting (RAS)
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=y
@@ -1317,6 +1279,7 @@
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
@@ -1357,6 +1320,7 @@
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -1426,6 +1390,7 @@
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
@@ -1481,10 +1446,6 @@
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
#
# Instrumentation Support
@@ -1497,24 +1458,31 @@
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
CONFIG_DEBUG_FS=y
# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUGGER is not set
CONFIG_IRQSTACKS=y
CONFIG_BOOTX_TEXT=y
+# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
+# CONFIG_PPC_EARLY_DEBUG_G5 is not set
+# CONFIG_PPC_EARLY_DEBUG_RTAS is not set
+# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
+# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
#
# Security options
diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig
index 6f6c6be..0362a70 100644
--- a/arch/powerpc/configs/ppc64_defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc5
-# Tue Dec 20 15:59:38 2005
+# Linux kernel version: 2.6.16-rc2
+# Fri Feb 10 17:32:14 2006
#
CONFIG_PPC64=y
CONFIG_64BIT=y
@@ -16,6 +16,10 @@
CONFIG_SYSVIPC_COMPAT=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_PPC_UDBG_16550=y
+CONFIG_GENERIC_TBSYNC=y
+# CONFIG_DEFAULT_UIMAGE is not set
#
# Processor support
@@ -33,7 +37,6 @@
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
@@ -48,8 +51,6 @@
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_CPUSETS=y
@@ -59,8 +60,10 @@
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
@@ -69,8 +72,10 @@
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
@@ -113,7 +118,6 @@
CONFIG_PPC_PMAC64=y
CONFIG_PPC_MAPLE=y
# CONFIG_PPC_CELL is not set
-CONFIG_PPC_OF=y
CONFIG_XICS=y
CONFIG_U3_DART=y
CONFIG_MPIC=y
@@ -124,8 +128,8 @@
# CONFIG_MMIO_NVRAM is not set
CONFIG_MPIC_BROKEN_U3=y
CONFIG_IBMVIO=y
+# CONFIG_IBMEBUS is not set
# CONFIG_PPC_MPC106 is not set
-CONFIG_GENERIC_TBSYNC=y
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
@@ -158,6 +162,7 @@
CONFIG_IOMMU_VMERGE=y
CONFIG_HOTPLUG_CPU=y
CONFIG_KEXEC=y
+# CONFIG_CRASH_DUMP is not set
CONFIG_IRQ_ALL_CPUS=y
CONFIG_PPC_SPLPAR=y
CONFIG_EEH=y
@@ -178,6 +183,7 @@
CONFIG_SPARSEMEM_EXTREME=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_SCHED_SMT is not set
CONFIG_PROC_DEVICETREE=y
@@ -221,6 +227,7 @@
#
# Networking options
#
+# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -260,6 +267,7 @@
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
+# CONFIG_NETFILTER_XTABLES is not set
#
# IP: Netfilter Configuration
@@ -277,65 +285,6 @@
CONFIG_IP_NF_AMANDA=m
# CONFIG_IP_NF_PPTP is not set
CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-CONFIG_IP_NF_MATCH_SCTP=m
-CONFIG_IP_NF_MATCH_DCCP=m
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_CONNBYTES=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_MATCH_STRING=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_TARGET_NFQUEUE=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
#
# DCCP Configuration (EXPERIMENTAL)
@@ -346,6 +295,11 @@
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
@@ -364,7 +318,6 @@
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
#
# Network testing
@@ -572,13 +525,7 @@
CONFIG_SCSI_IPR_DUMP=y
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-CONFIG_SCSI_QLA21XX=m
-CONFIG_SCSI_QLA22XX=m
-CONFIG_SCSI_QLA2300=m
-CONFIG_SCSI_QLA2322=m
-CONFIG_SCSI_QLA6312=m
-CONFIG_SCSI_QLA24XX=m
+# CONFIG_SCSI_QLA_FC is not set
CONFIG_SCSI_LPFC=m
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
@@ -642,8 +589,6 @@
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=y
-CONFIG_IEEE1394_CMP=m
-CONFIG_IEEE1394_AMDTP=m
#
# I2O device support
@@ -659,6 +604,7 @@
CONFIG_WINDFARM=y
CONFIG_WINDFARM_PM81=y
CONFIG_WINDFARM_PM91=y
+CONFIG_WINDFARM_PM112=y
#
# Network device support
@@ -731,6 +677,7 @@
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
@@ -853,6 +800,7 @@
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
@@ -880,6 +828,7 @@
# CONFIG_WATCHDOG is not set
# CONFIG_RTC is not set
CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
@@ -923,8 +872,7 @@
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_KEYWEST=y
-CONFIG_I2C_PMAC_SMU=y
+CONFIG_I2C_POWERMAC=y
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
@@ -957,6 +905,12 @@
# CONFIG_I2C_DEBUG_CHIP is not set
#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
@@ -1028,7 +982,6 @@
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set
@@ -1073,9 +1026,10 @@
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
-CONFIG_SND_GENERIC_DRIVER=y
#
# Generic devices
@@ -1089,6 +1043,8 @@
#
# PCI devices
#
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
@@ -1097,39 +1053,38 @@
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
-# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_YMFPCI is not set
#
# ALSA PowerMac devices
@@ -1201,13 +1156,16 @@
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
# CONFIG_USB_AIPTEK is not set
@@ -1221,6 +1179,7 @@
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
@@ -1307,6 +1266,10 @@
#
#
+# EDAC - error detection and reporting (RAS)
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=y
@@ -1340,6 +1303,7 @@
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
@@ -1379,6 +1343,7 @@
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -1449,6 +1414,7 @@
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
@@ -1504,10 +1470,6 @@
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
#
# Instrumentation Support
@@ -1520,18 +1482,20 @@
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
CONFIG_DEBUG_FS=y
# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
@@ -1540,6 +1504,11 @@
# CONFIG_XMON_DEFAULT is not set
CONFIG_IRQSTACKS=y
CONFIG_BOOTX_TEXT=y
+# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
+# CONFIG_PPC_EARLY_DEBUG_G5 is not set
+# CONFIG_PPC_EARLY_DEBUG_RTAS is not set
+# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
+# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
#
# Security options
diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index aa9893a..daaf038 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc5
-# Tue Dec 20 15:59:40 2005
+# Linux kernel version: 2.6.16-rc2
+# Fri Feb 10 17:33:32 2006
#
CONFIG_PPC64=y
CONFIG_64BIT=y
@@ -16,6 +16,10 @@
CONFIG_SYSVIPC_COMPAT=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+# CONFIG_DEFAULT_UIMAGE is not set
#
# Processor support
@@ -33,7 +37,6 @@
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
@@ -49,8 +52,6 @@
CONFIG_SYSCTL=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_CPUSETS=y
@@ -60,8 +61,10 @@
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
@@ -70,8 +73,10 @@
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
@@ -113,7 +118,6 @@
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_MAPLE is not set
# CONFIG_PPC_CELL is not set
-CONFIG_PPC_OF=y
CONFIG_XICS=y
# CONFIG_U3_DART is not set
CONFIG_MPIC=y
@@ -123,8 +127,8 @@
CONFIG_RTAS_FLASH=m
# CONFIG_MMIO_NVRAM is not set
CONFIG_IBMVIO=y
+# CONFIG_IBMEBUS is not set
# CONFIG_PPC_MPC106 is not set
-# CONFIG_GENERIC_TBSYNC is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_WANT_EARLY_SERIAL is not set
@@ -145,6 +149,7 @@
CONFIG_IOMMU_VMERGE=y
CONFIG_HOTPLUG_CPU=y
CONFIG_KEXEC=y
+# CONFIG_CRASH_DUMP is not set
CONFIG_IRQ_ALL_CPUS=y
CONFIG_PPC_SPLPAR=y
CONFIG_EEH=y
@@ -165,6 +170,7 @@
CONFIG_SPARSEMEM_EXTREME=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
# CONFIG_PPC_64K_PAGES is not set
CONFIG_SCHED_SMT=y
@@ -209,6 +215,7 @@
#
# Networking options
#
+# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -248,6 +255,7 @@
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
+# CONFIG_NETFILTER_XTABLES is not set
#
# IP: Netfilter Configuration
@@ -265,65 +273,6 @@
CONFIG_IP_NF_AMANDA=m
# CONFIG_IP_NF_PPTP is not set
CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-CONFIG_IP_NF_MATCH_SCTP=m
-# CONFIG_IP_NF_MATCH_DCCP is not set
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_CONNBYTES=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_MATCH_STRING=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_TARGET_NFQUEUE=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
#
# DCCP Configuration (EXPERIMENTAL)
@@ -334,6 +283,11 @@
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
@@ -352,7 +306,6 @@
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
#
# Network testing
@@ -550,13 +503,7 @@
CONFIG_SCSI_IPR_DUMP=y
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-CONFIG_SCSI_QLA21XX=m
-CONFIG_SCSI_QLA22XX=m
-CONFIG_SCSI_QLA2300=m
-CONFIG_SCSI_QLA2322=m
-CONFIG_SCSI_QLA6312=m
-CONFIG_SCSI_QLA24XX=m
+# CONFIG_SCSI_QLA_FC is not set
CONFIG_SCSI_LPFC=m
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
@@ -678,6 +625,7 @@
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
@@ -803,6 +751,7 @@
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
@@ -909,6 +858,12 @@
# CONFIG_I2C_DEBUG_CHIP is not set
#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
@@ -976,7 +931,6 @@
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set
@@ -1061,12 +1015,15 @@
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
# CONFIG_USB_AIPTEK is not set
@@ -1080,6 +1037,7 @@
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
@@ -1167,6 +1125,10 @@
#
#
+# EDAC - error detection and reporting (RAS)
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=y
@@ -1200,6 +1162,7 @@
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
@@ -1240,6 +1203,7 @@
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -1351,10 +1315,6 @@
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
#
# Instrumentation Support
@@ -1367,18 +1327,20 @@
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
CONFIG_DEBUG_FS=y
# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
@@ -1387,6 +1349,11 @@
CONFIG_XMON_DEFAULT=y
CONFIG_IRQSTACKS=y
# CONFIG_BOOTX_TEXT is not set
+# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
+# CONFIG_PPC_EARLY_DEBUG_G5 is not set
+# CONFIG_PPC_EARLY_DEBUG_RTAS is not set
+# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
+# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
#
# Security options
diff --git a/arch/powerpc/kernel/crash.c b/arch/powerpc/kernel/crash.c
index 8c21d37..778f22f 100644
--- a/arch/powerpc/kernel/crash.c
+++ b/arch/powerpc/kernel/crash.c
@@ -134,8 +134,10 @@
* the crash CPU will send an IPI and wait for other CPUs to
* respond. If not, proceed the kexec boot even though we failed to
* capture other CPU states.
+ * Delay of at least 10 seconds.
*/
- msecs = 1000000;
+ printk(KERN_ALERT "Sending IPI to other cpus...\n");
+ msecs = 10000;
while ((atomic_read(&waiting_for_crash_ipi) > 0) && (--msecs > 0)) {
barrier();
mdelay(1);
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index 03b25f9..a0579e8 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -714,6 +714,7 @@
#ifdef CONFIG_ALTIVEC
bne load_up_altivec /* if from user, just load it up */
#endif /* CONFIG_ALTIVEC */
+ addi r3,r1,STACK_FRAME_OVERHEAD
EXC_XFER_EE_LITE(0xf20, altivec_unavailable_exception)
PerformanceMonitor:
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index 2b03a09..11f2cd5 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -139,7 +139,7 @@
ori r24,r24,MSR_RI
mtmsrd r24 /* RI on */
- /* Grab our linux cpu number */
+ /* Grab our physical cpu number */
mr r24,r3
/* Tell the master cpu we're here */
@@ -153,11 +153,7 @@
cmpdi 0,r4,1
bne 100b
-#ifdef CONFIG_HMT
- SET_REG_IMMEDIATE(r4, .hmt_init)
- mtctr r4
- bctr
-#elif defined(CONFIG_SMP) || defined(CONFIG_KEXEC)
+#if defined(CONFIG_SMP) || defined(CONFIG_KEXEC)
LOAD_REG_IMMEDIATE(r4, .pSeries_secondary_smp_init)
mtctr r4
mr r3,r24
@@ -319,7 +315,6 @@
label##_pSeries: \
HMT_MEDIUM; \
mtspr SPRN_SPRG1,r13; /* save r13 */ \
- RUNLATCH_ON(r13); \
EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common)
#define STD_EXCEPTION_ISERIES(n, label, area) \
@@ -327,7 +322,6 @@
label##_iSeries: \
HMT_MEDIUM; \
mtspr SPRN_SPRG1,r13; /* save r13 */ \
- RUNLATCH_ON(r13); \
EXCEPTION_PROLOG_ISERIES_1(area); \
EXCEPTION_PROLOG_ISERIES_2; \
b label##_common
@@ -337,7 +331,6 @@
label##_iSeries: \
HMT_MEDIUM; \
mtspr SPRN_SPRG1,r13; /* save r13 */ \
- RUNLATCH_ON(r13); \
EXCEPTION_PROLOG_ISERIES_1(PACA_EXGEN); \
lbz r10,PACAPROCENABLED(r13); \
cmpwi 0,r10,0; \
@@ -390,6 +383,7 @@
label##_common: \
EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \
DISABLE_INTS; \
+ bl .ppc64_runlatch_on; \
addi r3,r1,STACK_FRAME_OVERHEAD; \
bl hdlr; \
b .ret_from_except_lite
@@ -407,7 +401,6 @@
_machine_check_pSeries:
HMT_MEDIUM
mtspr SPRN_SPRG1,r13 /* save r13 */
- RUNLATCH_ON(r13)
EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common)
. = 0x300
@@ -434,7 +427,6 @@
data_access_slb_pSeries:
HMT_MEDIUM
mtspr SPRN_SPRG1,r13
- RUNLATCH_ON(r13)
mfspr r13,SPRN_SPRG3 /* get paca address into r13 */
std r3,PACA_EXSLB+EX_R3(r13)
mfspr r3,SPRN_DAR
@@ -460,7 +452,6 @@
instruction_access_slb_pSeries:
HMT_MEDIUM
mtspr SPRN_SPRG1,r13
- RUNLATCH_ON(r13)
mfspr r13,SPRN_SPRG3 /* get paca address into r13 */
std r3,PACA_EXSLB+EX_R3(r13)
mfspr r3,SPRN_SRR0 /* SRR0 is faulting address */
@@ -491,7 +482,6 @@
.globl system_call_pSeries
system_call_pSeries:
HMT_MEDIUM
- RUNLATCH_ON(r9)
mr r9,r13
mfmsr r10
mfspr r13,SPRN_SPRG3
@@ -575,7 +565,6 @@
system_reset_fwnmi:
HMT_MEDIUM
mtspr SPRN_SPRG1,r13 /* save r13 */
- RUNLATCH_ON(r13)
EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common)
.globl machine_check_fwnmi
@@ -583,7 +572,6 @@
machine_check_fwnmi:
HMT_MEDIUM
mtspr SPRN_SPRG1,r13 /* save r13 */
- RUNLATCH_ON(r13)
EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common)
#ifdef CONFIG_PPC_ISERIES
@@ -894,7 +882,6 @@
.align 7
.globl data_access_common
data_access_common:
- RUNLATCH_ON(r10) /* It wont fit in the 0x300 handler */
mfspr r10,SPRN_DAR
std r10,PACA_EXGEN+EX_DAR(r13)
mfspr r10,SPRN_DSISR
@@ -1042,6 +1029,7 @@
EXCEPTION_PROLOG_COMMON(0x500, PACA_EXGEN)
hardware_interrupt_entry:
DISABLE_INTS
+ bl .ppc64_runlatch_on
addi r3,r1,STACK_FRAME_OVERHEAD
bl .do_IRQ
b .ret_from_except_lite
@@ -1816,22 +1804,6 @@
ori r6,r6,MSR_RI
mtmsrd r6 /* RI on */
-#ifdef CONFIG_HMT
- /* Start up the second thread on cpu 0 */
- mfspr r3,SPRN_PVR
- srwi r3,r3,16
- cmpwi r3,0x34 /* Pulsar */
- beq 90f
- cmpwi r3,0x36 /* Icestar */
- beq 90f
- cmpwi r3,0x37 /* SStar */
- beq 90f
- b 91f /* HMT not supported */
-90: li r3,0
- bl .hmt_start_secondary
-91:
-#endif
-
/* The following gets the stack and TOC set up with the regs */
/* pointing to the real addr of the kernel stack. This is */
/* all done to support the C function call below which sets */
@@ -1945,77 +1917,8 @@
bl .start_kernel
-_GLOBAL(hmt_init)
-#ifdef CONFIG_HMT
- LOAD_REG_IMMEDIATE(r5, hmt_thread_data)
- mfspr r7,SPRN_PVR
- srwi r7,r7,16
- cmpwi r7,0x34 /* Pulsar */
- beq 90f
- cmpwi r7,0x36 /* Icestar */
- beq 91f
- cmpwi r7,0x37 /* SStar */
- beq 91f
- b 101f
-90: mfspr r6,SPRN_PIR
- andi. r6,r6,0x1f
- b 92f
-91: mfspr r6,SPRN_PIR
- andi. r6,r6,0x3ff
-92: sldi r4,r24,3
- stwx r6,r5,r4
- bl .hmt_start_secondary
- b 101f
-
-__hmt_secondary_hold:
- LOAD_REG_IMMEDIATE(r5, hmt_thread_data)
- clrldi r5,r5,4
- li r7,0
- mfspr r6,SPRN_PIR
- mfspr r8,SPRN_PVR
- srwi r8,r8,16
- cmpwi r8,0x34
- bne 93f
- andi. r6,r6,0x1f
- b 103f
-93: andi. r6,r6,0x3f
-
-103: lwzx r8,r5,r7
- cmpw r8,r6
- beq 104f
- addi r7,r7,8
- b 103b
-
-104: addi r7,r7,4
- lwzx r9,r5,r7
- mr r24,r9
-101:
-#endif
- mr r3,r24
- b .pSeries_secondary_smp_init
-
-#ifdef CONFIG_HMT
-_GLOBAL(hmt_start_secondary)
- LOAD_REG_IMMEDIATE(r4,__hmt_secondary_hold)
- clrldi r4,r4,4
- mtspr SPRN_NIADORM, r4
- mfspr r4, SPRN_MSRDORM
- li r5, -65
- and r4, r4, r5
- mtspr SPRN_MSRDORM, r4
- lis r4,0xffef
- ori r4,r4,0x7403
- mtspr SPRN_TSC, r4
- li r4,0x1f4
- mtspr SPRN_TST, r4
- mfspr r4, SPRN_HID0
- ori r4, r4, 0x1
- mtspr SPRN_HID0, r4
- mfspr r4, SPRN_CTRLF
- oris r4, r4, 0x40
- mtspr SPRN_CTRLT, r4
- blr
-#endif
+ /* Not reached */
+ BUG_OPCODE
/*
* We put a few things here that have to be page-aligned.
diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kernel/machine_kexec_64.c
index d643144..ee166c5 100644
--- a/arch/powerpc/kernel/machine_kexec_64.c
+++ b/arch/powerpc/kernel/machine_kexec_64.c
@@ -26,8 +26,6 @@
#include <asm/prom.h>
#include <asm/smp.h>
-#define HASH_GROUP_SIZE 0x80 /* size of each hash group, asm/mmu.h */
-
int default_machine_kexec_prepare(struct kimage *image)
{
int i;
@@ -61,7 +59,7 @@
*/
if (htab_address) {
low = __pa(htab_address);
- high = low + (htab_hash_mask + 1) * HASH_GROUP_SIZE;
+ high = low + htab_size_bytes;
for (i = 0; i < image->nr_segments; i++) {
begin = image->segment[i].mem;
@@ -294,7 +292,7 @@
}
/* Values we need to export to the second kernel via the device tree. */
-static unsigned long htab_base, htab_size, kernel_end;
+static unsigned long htab_base, kernel_end;
static struct property htab_base_prop = {
.name = "linux,htab-base",
@@ -305,7 +303,7 @@
static struct property htab_size_prop = {
.name = "linux,htab-size",
.length = sizeof(unsigned long),
- .value = (unsigned char *)&htab_size,
+ .value = (unsigned char *)&htab_size_bytes,
};
static struct property kernel_end_prop = {
@@ -331,8 +329,6 @@
htab_base = __pa(htab_address);
prom_add_property(node, &htab_base_prop);
-
- htab_size = 1UL << ppc64_pft_size;
prom_add_property(node, &htab_size_prop);
out:
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 5770399..c225cf1 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -888,3 +888,35 @@
show_stack(current, NULL);
}
EXPORT_SYMBOL(dump_stack);
+
+#ifdef CONFIG_PPC64
+void ppc64_runlatch_on(void)
+{
+ unsigned long ctrl;
+
+ if (cpu_has_feature(CPU_FTR_CTRL) && !test_thread_flag(TIF_RUNLATCH)) {
+ HMT_medium();
+
+ ctrl = mfspr(SPRN_CTRLF);
+ ctrl |= CTRL_RUNLATCH;
+ mtspr(SPRN_CTRLT, ctrl);
+
+ set_thread_flag(TIF_RUNLATCH);
+ }
+}
+
+void ppc64_runlatch_off(void)
+{
+ unsigned long ctrl;
+
+ if (cpu_has_feature(CPU_FTR_CTRL) && test_thread_flag(TIF_RUNLATCH)) {
+ HMT_medium();
+
+ clear_thread_flag(TIF_RUNLATCH);
+
+ ctrl = mfspr(SPRN_CTRLF);
+ ctrl &= ~CTRL_RUNLATCH;
+ mtspr(SPRN_CTRLT, ctrl);
+ }
+}
+#endif
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 294832a..6dbd217 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -816,8 +816,6 @@
{
unsigned long start, mem, size;
struct device_node **allnextp = &allnodes;
- char *p = NULL;
- int l = 0;
DBG(" -> unflatten_device_tree()\n");
@@ -857,19 +855,6 @@
if (of_chosen == NULL)
of_chosen = of_find_node_by_path("/chosen@0");
- /* Retreive command line */
- if (of_chosen != NULL) {
- p = (char *)get_property(of_chosen, "bootargs", &l);
- if (p != NULL && l > 0)
- strlcpy(cmd_line, p, min(l, COMMAND_LINE_SIZE));
- }
-#ifdef CONFIG_CMDLINE
- if (l == 0 || (l == 1 && (*p) == 0))
- strlcpy(cmd_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
-#endif /* CONFIG_CMDLINE */
-
- DBG("Command line is: %s\n", cmd_line);
-
DBG(" <- unflatten_device_tree()\n");
}
@@ -940,6 +925,8 @@
{
u32 *prop;
unsigned long *lprop;
+ unsigned long l;
+ char *p;
DBG("search \"chosen\", depth: %d, uname: %s\n", depth, uname);
@@ -1004,6 +991,41 @@
crashk_res.end = crashk_res.start + *lprop - 1;
#endif
+ /* Retreive command line */
+ p = of_get_flat_dt_prop(node, "bootargs", &l);
+ if (p != NULL && l > 0)
+ strlcpy(cmd_line, p, min((int)l, COMMAND_LINE_SIZE));
+
+#ifdef CONFIG_CMDLINE
+ if (l == 0 || (l == 1 && (*p) == 0))
+ strlcpy(cmd_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
+#endif /* CONFIG_CMDLINE */
+
+ DBG("Command line is: %s\n", cmd_line);
+
+ if (strstr(cmd_line, "mem=")) {
+ char *p, *q;
+ unsigned long maxmem = 0;
+
+ for (q = cmd_line; (p = strstr(q, "mem=")) != 0; ) {
+ q = p + 4;
+ if (p > cmd_line && p[-1] != ' ')
+ continue;
+ maxmem = simple_strtoul(q, &q, 0);
+ if (*q == 'k' || *q == 'K') {
+ maxmem <<= 10;
+ ++q;
+ } else if (*q == 'm' || *q == 'M') {
+ maxmem <<= 20;
+ ++q;
+ } else if (*q == 'g' || *q == 'G') {
+ maxmem <<= 30;
+ ++q;
+ }
+ }
+ memory_limit = maxmem;
+ }
+
/* break now */
return 1;
}
@@ -1124,7 +1146,7 @@
size_32 = *(reserve_map_32++);
if (size_32 == 0)
break;
- DBG("reserving: %lx -> %lx\n", base_32, size_32);
+ DBG("reserving: %x -> %x\n", base_32, size_32);
lmb_reserve(base_32, size_32);
}
return;
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index ec7153f..d34fe53 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -205,14 +205,6 @@
#define MAX_CPU_THREADS 2
-/* TO GO */
-#ifdef CONFIG_HMT
-struct {
- unsigned int pir;
- unsigned int threadid;
-} hmt_thread_data[NR_CPUS];
-#endif /* CONFIG_HMT */
-
/*
* Error results ... some OF calls will return "-1" on error, some
* will return 0, some will return either. To simplify, here are
@@ -1319,10 +1311,6 @@
*/
*spinloop = 0;
-#ifdef CONFIG_HMT
- for (i = 0; i < NR_CPUS; i++)
- RELOC(hmt_thread_data)[i].pir = 0xdeadbeef;
-#endif
/* look for cpus */
for (node = 0; prom_next_node(&node); ) {
type[0] = 0;
@@ -1389,32 +1377,6 @@
/* Reserve cpu #s for secondary threads. They start later. */
cpuid += cpu_threads;
}
-#ifdef CONFIG_HMT
- /* Only enable HMT on processors that provide support. */
- if (__is_processor(PV_PULSAR) ||
- __is_processor(PV_ICESTAR) ||
- __is_processor(PV_SSTAR)) {
- prom_printf(" starting secondary threads\n");
-
- for (i = 0; i < NR_CPUS; i += 2) {
- if (!cpu_online(i))
- continue;
-
- if (i == 0) {
- unsigned long pir = mfspr(SPRN_PIR);
- if (__is_processor(PV_PULSAR)) {
- RELOC(hmt_thread_data)[i].pir =
- pir & 0x1f;
- } else {
- RELOC(hmt_thread_data)[i].pir =
- pir & 0x3ff;
- }
- }
- }
- } else {
- prom_printf("Processor is not HMT capable\n");
- }
-#endif
if (cpuid > NR_CPUS)
prom_printf("WARNING: maximum CPUs (" __stringify(NR_CPUS)
diff --git a/arch/powerpc/mm/hash_native_64.c b/arch/powerpc/mm/hash_native_64.c
index d96bcfe..33654d1 100644
--- a/arch/powerpc/mm/hash_native_64.c
+++ b/arch/powerpc/mm/hash_native_64.c
@@ -403,12 +403,17 @@
*/
hpte_v = hptep->v;
+ /*
+ * Call __tlbie() here rather than tlbie() since we
+ * already hold the native_tlbie_lock.
+ */
if (hpte_v & HPTE_V_VALID) {
hptep->v = 0;
- tlbie(slot2va(hpte_v, slot), MMU_PAGE_4K, 0);
+ __tlbie(slot2va(hpte_v, slot), MMU_PAGE_4K);
}
}
+ asm volatile("eieio; tlbsync; ptesync":::"memory");
spin_unlock(&native_tlbie_lock);
local_irq_restore(flags);
}
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index 149351a..b1f614c 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -88,6 +88,7 @@
struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT];
hpte_t *htab_address;
+unsigned long htab_size_bytes;
unsigned long htab_hash_mask;
int mmu_linear_psize = MMU_PAGE_4K;
int mmu_virtual_psize = MMU_PAGE_4K;
@@ -399,7 +400,7 @@
void __init htab_initialize(void)
{
- unsigned long table, htab_size_bytes;
+ unsigned long table;
unsigned long pteg_count;
unsigned long mode_rw;
unsigned long base = 0, size = 0;
diff --git a/arch/powerpc/oprofile/Kconfig b/arch/powerpc/oprofile/Kconfig
index eb2dece..d03c0e5 100644
--- a/arch/powerpc/oprofile/Kconfig
+++ b/arch/powerpc/oprofile/Kconfig
@@ -1,4 +1,5 @@
config PROFILING
+ depends on !PPC_ISERIES
bool "Profiling support (EXPERIMENTAL)"
help
Say Y here to enable the extended profiling support mechanisms used
diff --git a/arch/powerpc/platforms/iseries/lpevents.c b/arch/powerpc/platforms/iseries/lpevents.c
index 0b88530..8ca7b939 100644
--- a/arch/powerpc/platforms/iseries/lpevents.c
+++ b/arch/powerpc/platforms/iseries/lpevents.c
@@ -184,6 +184,8 @@
{
void *eventStack;
+ spin_lock_init(&hvlpevent_queue.lock);
+
/* Allocate a page for the Event Stack. */
eventStack = alloc_bootmem_pages(LpEventStackSize);
memset(eventStack, 0, LpEventStackSize);
diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c
index 3f87901..3ecc4a6 100644
--- a/arch/powerpc/platforms/iseries/setup.c
+++ b/arch/powerpc/platforms/iseries/setup.c
@@ -648,6 +648,7 @@
* here and let the timer_interrupt code sort out the actual time.
*/
get_lppaca()->int_dword.fields.decr_int = 1;
+ ppc64_runlatch_on();
process_iSeries_events();
}
diff --git a/arch/powerpc/platforms/maple/pci.c b/arch/powerpc/platforms/maple/pci.c
index 7d4099a..85d6c93 100644
--- a/arch/powerpc/platforms/maple/pci.c
+++ b/arch/powerpc/platforms/maple/pci.c
@@ -435,8 +435,8 @@
PCI_DN(np)->busno = 0xf0;
}
- /* Tell pci.c to use the common resource allocation mecanism */
- pci_probe_only = 0;
+ /* Tell pci.c to not change any resource allocations. */
+ pci_probe_only = 1;
/* Allow all IO */
io_page_mask = -1;
diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig
index e3fc340..4e5c8f8 100644
--- a/arch/powerpc/platforms/pseries/Kconfig
+++ b/arch/powerpc/platforms/pseries/Kconfig
@@ -9,13 +9,6 @@
processors, that is, which share physical processors between
two or more partitions.
-config HMT
- bool "Hardware multithreading"
- depends on SMP && PPC_PSERIES && BROKEN
- help
- This option enables hardware multithreading on RS64 cpus.
- pSeries systems p620 and p660 have such a cpu type.
-
config EEH
bool "PCI Extended Error Handling (EEH)" if EMBEDDED
depends on PPC_PSERIES
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 4f26304..7dcdfcb 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -234,7 +234,7 @@
spin_lock_irqsave(&mpic->fixup_lock, flags);
writeb(0x10 + 2 * fixup->index, fixup->base + 2);
tmp = readl(fixup->base + 4);
- tmp &= ~1U;
+ tmp |= 1;
writel(tmp, fixup->base + 4);
spin_unlock_irqrestore(&mpic->fixup_lock, flags);
}
@@ -446,14 +446,15 @@
#ifdef CONFIG_MPIC_BROKEN_U3
struct mpic *mpic = mpic_from_irq(irq);
unsigned int src = irq - mpic->irq_offset;
-
- if (mpic_is_ht_interrupt(mpic, src))
- mpic_startup_ht_interrupt(mpic, src, irq_desc[irq].status);
-
#endif /* CONFIG_MPIC_BROKEN_U3 */
mpic_enable_irq(irq);
+#ifdef CONFIG_MPIC_BROKEN_U3
+ if (mpic_is_ht_interrupt(mpic, src))
+ mpic_startup_ht_interrupt(mpic, src, irq_desc[irq].status);
+#endif /* CONFIG_MPIC_BROKEN_U3 */
+
return 0;
}
diff --git a/arch/ppc/kernel/head.S b/arch/ppc/kernel/head.S
index c5a890d..53ea845 100644
--- a/arch/ppc/kernel/head.S
+++ b/arch/ppc/kernel/head.S
@@ -751,6 +751,7 @@
#ifdef CONFIG_ALTIVEC
bne load_up_altivec /* if from user, just load it up */
#endif /* CONFIG_ALTIVEC */
+ addi r3,r1,STACK_FRAME_OVERHEAD
EXC_XFER_EE_LITE(0xf20, altivec_unavailable_exception)
#ifdef CONFIG_PPC64BRIDGE
diff --git a/arch/ppc/xmon/adb.c b/arch/ppc/xmon/adb.c
deleted file mode 100644
index e91384d..0000000
--- a/arch/ppc/xmon/adb.c
+++ /dev/null
@@ -1,212 +0,0 @@
-/*
- * Copyright (C) 1996 Paul Mackerras.
- */
-#include "nonstdio.h"
-#include "privinst.h"
-
-#define scanhex xmon_scanhex
-#define skipbl xmon_skipbl
-
-#define ADB_B (*(volatile unsigned char *)0xf3016000)
-#define ADB_SR (*(volatile unsigned char *)0xf3017400)
-#define ADB_ACR (*(volatile unsigned char *)0xf3017600)
-#define ADB_IFR (*(volatile unsigned char *)0xf3017a00)
-
-static inline void eieio(void) { asm volatile ("eieio" : :); }
-
-#define N_ADB_LOG 1000
-struct adb_log {
- unsigned char b;
- unsigned char ifr;
- unsigned char acr;
- unsigned int time;
-} adb_log[N_ADB_LOG];
-int n_adb_log;
-
-void
-init_adb_log(void)
-{
- adb_log[0].b = ADB_B;
- adb_log[0].ifr = ADB_IFR;
- adb_log[0].acr = ADB_ACR;
- adb_log[0].time = get_dec();
- n_adb_log = 0;
-}
-
-void
-dump_adb_log(void)
-{
- unsigned t, t0;
- struct adb_log *ap;
- int i;
-
- ap = adb_log;
- t0 = ap->time;
- for (i = 0; i <= n_adb_log; ++i, ++ap) {
- t = t0 - ap->time;
- printf("b=%x ifr=%x acr=%x at %d.%.7d\n", ap->b, ap->ifr, ap->acr,
- t / 1000000000, (t % 1000000000) / 100);
- }
-}
-
-void
-adb_chklog(void)
-{
- struct adb_log *ap = &adb_log[n_adb_log + 1];
-
- ap->b = ADB_B;
- ap->ifr = ADB_IFR;
- ap->acr = ADB_ACR;
- if (ap->b != ap[-1].b || (ap->ifr & 4) != (ap[-1].ifr & 4)
- || ap->acr != ap[-1].acr) {
- ap->time = get_dec();
- ++n_adb_log;
- }
-}
-
-int
-adb_bitwait(int bmask, int bval, int fmask, int fval)
-{
- int i;
- struct adb_log *ap;
-
- for (i = 10000; i > 0; --i) {
- adb_chklog();
- ap = &adb_log[n_adb_log];
- if ((ap->b & bmask) == bval && (ap->ifr & fmask) == fval)
- return 0;
- }
- return -1;
-}
-
-int
-adb_wait(void)
-{
- if (adb_bitwait(0, 0, 4, 4) < 0) {
- printf("adb: ready wait timeout\n");
- return -1;
- }
- return 0;
-}
-
-void
-adb_readin(void)
-{
- int i, j;
- unsigned char d[64];
-
- if (ADB_B & 8) {
- printf("ADB_B: %x\n", ADB_B);
- return;
- }
- i = 0;
- adb_wait();
- j = ADB_SR;
- eieio();
- ADB_B &= ~0x20;
- eieio();
- for (;;) {
- if (adb_wait() < 0)
- break;
- d[i++] = ADB_SR;
- eieio();
- if (ADB_B & 8)
- break;
- ADB_B ^= 0x10;
- eieio();
- }
- ADB_B |= 0x30;
- if (adb_wait() == 0)
- j = ADB_SR;
- for (j = 0; j < i; ++j)
- printf("%.2x ", d[j]);
- printf("\n");
-}
-
-int
-adb_write(unsigned char *d, int i)
-{
- int j;
- unsigned x;
-
- if ((ADB_B & 8) == 0) {
- printf("r: ");
- adb_readin();
- }
- for (;;) {
- ADB_ACR = 0x1c;
- eieio();
- ADB_SR = d[0];
- eieio();
- ADB_B &= ~0x20;
- eieio();
- if (ADB_B & 8)
- break;
- ADB_ACR = 0xc;
- eieio();
- ADB_B |= 0x20;
- eieio();
- adb_readin();
- }
- adb_wait();
- for (j = 1; j < i; ++j) {
- ADB_SR = d[j];
- eieio();
- ADB_B ^= 0x10;
- eieio();
- if (adb_wait() < 0)
- break;
- }
- ADB_ACR = 0xc;
- eieio();
- x = ADB_SR;
- eieio();
- ADB_B |= 0x30;
- return j;
-}
-
-void
-adbcmds(void)
-{
- char cmd;
- unsigned rtcu, rtcl, dec, pdec, x;
- int i, j;
- unsigned char d[64];
-
- cmd = skipbl();
- switch (cmd) {
- case 't':
- for (;;) {
- rtcl = get_rtcl();
- rtcu = get_rtcu();
- dec = get_dec();
- printf("rtc u=%u l=%u dec=%x (%d = %d.%.7d)\n",
- rtcu, rtcl, dec, pdec - dec, (pdec - dec) / 1000000000,
- ((pdec - dec) % 1000000000) / 100);
- pdec = dec;
- if (cmd == 'x')
- break;
- while (xmon_read(stdin, &cmd, 1) != 1)
- ;
- }
- break;
- case 'r':
- init_adb_log();
- while (adb_bitwait(8, 0, 0, 0) == 0)
- adb_readin();
- break;
- case 'w':
- i = 0;
- while (scanhex(&x))
- d[i++] = x;
- init_adb_log();
- j = adb_write(d, i);
- printf("sent %d bytes\n", j);
- while (adb_bitwait(8, 0, 0, 0) == 0)
- adb_readin();
- break;
- case 'l':
- dump_adb_log();
- break;
- }
-}
diff --git a/arch/ppc/xmon/start.c b/arch/ppc/xmon/start.c
index 484f5bb..ff86b2d 100644
--- a/arch/ppc/xmon/start.c
+++ b/arch/ppc/xmon/start.c
@@ -6,16 +6,11 @@
#include <asm/machdep.h>
#include <asm/io.h>
#include <asm/page.h>
-#include <linux/adb.h>
-#include <linux/pmu.h>
-#include <linux/cuda.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/sysrq.h>
#include <linux/bitops.h>
#include <asm/xmon.h>
-#include <asm/prom.h>
-#include <asm/bootx.h>
#include <asm/machdep.h>
#include <asm/errno.h>
#include <asm/processor.h>
@@ -26,9 +21,7 @@
unsigned int TXRDY, RXRDY, DLAB;
static int xmon_expect(const char *str, unsigned int timeout);
-static int use_screen;
static int via_modem;
-static int xmon_use_sccb;
#define TB_SPEED 25000000
@@ -46,47 +39,6 @@
sccd[3] &= ~DLAB; /* reset DLAB */
}
-extern int adb_init(void);
-
-#ifdef CONFIG_PPC_CHRP
-/*
- * This looks in the "ranges" property for the primary PCI host bridge
- * to find the physical address of the start of PCI/ISA I/O space.
- * It is basically a cut-down version of pci_process_bridge_OF_ranges.
- */
-static unsigned long chrp_find_phys_io_base(void)
-{
- struct device_node *node;
- unsigned int *ranges;
- unsigned long base = CHRP_ISA_IO_BASE;
- int rlen = 0;
- int np;
-
- node = find_devices("isa");
- if (node != NULL) {
- node = node->parent;
- if (node == NULL || node->type == NULL
- || strcmp(node->type, "pci") != 0)
- node = NULL;
- }
- if (node == NULL)
- node = find_devices("pci");
- if (node == NULL)
- return base;
-
- ranges = (unsigned int *) get_property(node, "ranges", &rlen);
- np = prom_n_addr_cells(node) + 5;
- while ((rlen -= np * sizeof(unsigned int)) >= 0) {
- if ((ranges[0] >> 24) == 1 && ranges[2] == 0) {
- /* I/O space starting at 0, grab the phys base */
- base = ranges[np - 3];
- break;
- }
- ranges += np;
- }
- return base;
-}
-#endif /* CONFIG_PPC_CHRP */
#ifdef CONFIG_MAGIC_SYSRQ
static void sysrq_handle_xmon(int key, struct pt_regs *regs,
@@ -109,22 +61,6 @@
#ifdef CONFIG_PPC_MULTIPLATFORM
volatile unsigned char *base;
-#ifdef CONFIG_PPC_CHRP
- base = (volatile unsigned char *) isa_io_base;
- if (_machine == _MACH_chrp)
- base = (volatile unsigned char *)
- ioremap(chrp_find_phys_io_base(), 0x1000);
-
- sccc = base + 0x3fd;
- sccd = base + 0x3f8;
- if (xmon_use_sccb) {
- sccc -= 0x100;
- sccd -= 0x100;
- }
- TXRDY = 0x20;
- RXRDY = 1;
- DLAB = 0x80;
-#endif /* CONFIG_PPC_CHRP */
#elif defined(CONFIG_GEMINI)
/* should already be mapped by the kernel boot */
sccc = (volatile unsigned char *) 0xffeffb0d;
@@ -143,7 +79,7 @@
register_sysrq_key('x', &sysrq_xmon_op);
}
-static int scc_initialized = 0;
+static int scc_initialized;
void xmon_init_scc(void);
@@ -163,14 +99,6 @@
break;
#endif
-#ifdef CONFIG_BOOTX_TEXT
- if (use_screen) {
- /* write it on the screen */
- for (i = 0; i < nb; ++i)
- btext_drawchar(*p++);
- goto out;
- }
-#endif
if (!scc_initialized)
xmon_init_scc();
ct = 0;
@@ -190,7 +118,6 @@
eieio();
}
- out:
#ifdef CONFIG_SMP
if (!locked)
clear_bit(0, &xmon_write_lock);
@@ -199,65 +126,7 @@
}
int xmon_wants_key;
-int xmon_adb_keycode;
-#ifdef CONFIG_BOOTX_TEXT
-static int xmon_adb_shiftstate;
-
-static unsigned char xmon_keytab[128] =
- "asdfhgzxcv\000bqwer" /* 0x00 - 0x0f */
- "yt123465=97-80]o" /* 0x10 - 0x1f */
- "u[ip\rlj'k;\\,/nm." /* 0x20 - 0x2f */
- "\t `\177\0\033\0\0\0\0\0\0\0\0\0\0" /* 0x30 - 0x3f */
- "\0.\0*\0+\0\0\0\0\0/\r\0-\0" /* 0x40 - 0x4f */
- "\0\0000123456789\0\0\0"; /* 0x50 - 0x5f */
-
-static unsigned char xmon_shift_keytab[128] =
- "ASDFHGZXCV\000BQWER" /* 0x00 - 0x0f */
- "YT!@#$^%+(&_*)}O" /* 0x10 - 0x1f */
- "U{IP\rLJ\"K:|<?NM>" /* 0x20 - 0x2f */
- "\t ~\177\0\033\0\0\0\0\0\0\0\0\0\0" /* 0x30 - 0x3f */
- "\0.\0*\0+\0\0\0\0\0/\r\0-\0" /* 0x40 - 0x4f */
- "\0\0000123456789\0\0\0"; /* 0x50 - 0x5f */
-
-static int
-xmon_get_adb_key(void)
-{
- int k, t, on;
-
- xmon_wants_key = 1;
- for (;;) {
- xmon_adb_keycode = -1;
- t = 0;
- on = 0;
- do {
- if (--t < 0) {
- on = 1 - on;
- btext_drawchar(on? 0xdb: 0x20);
- btext_drawchar('\b');
- t = 200000;
- }
- do_poll_adb();
- } while (xmon_adb_keycode == -1);
- k = xmon_adb_keycode;
- if (on)
- btext_drawstring(" \b");
-
- /* test for shift keys */
- if ((k & 0x7f) == 0x38 || (k & 0x7f) == 0x7b) {
- xmon_adb_shiftstate = (k & 0x80) == 0;
- continue;
- }
- if (k >= 0x80)
- continue; /* ignore up transitions */
- k = (xmon_adb_shiftstate? xmon_shift_keytab: xmon_keytab)[k];
- if (k != 0)
- break;
- }
- xmon_wants_key = 0;
- return k;
-}
-#endif /* CONFIG_BOOTX_TEXT */
int
xmon_read(void *handle, void *ptr, int nb)
@@ -265,18 +134,11 @@
char *p = ptr;
int i;
-#ifdef CONFIG_BOOTX_TEXT
- if (use_screen) {
- for (i = 0; i < nb; ++i)
- *p++ = xmon_get_adb_key();
- return i;
- }
-#endif
if (!scc_initialized)
xmon_init_scc();
for (i = 0; i < nb; ++i) {
while ((*sccc & RXRDY) == 0)
- do_poll_adb();
+ ;
buf_access();
*p++ = *sccd;
}
@@ -287,7 +149,7 @@
xmon_read_poll(void)
{
if ((*sccc & RXRDY) == 0) {
- do_poll_adb();
+ ;
return -1;
}
buf_access();
@@ -297,15 +159,6 @@
void
xmon_init_scc(void)
{
- if ( _machine == _MACH_chrp )
- {
- sccd[3] = 0x83; eieio(); /* LCR = 8N1 + DLAB */
- sccd[0] = 12; eieio(); /* DLL = 9600 baud */
- sccd[1] = 0; eieio();
- sccd[2] = 0; eieio(); /* FCR = 0 */
- sccd[3] = 3; eieio(); /* LCR = 8N1 */
- sccd[1] = 0; eieio(); /* IER = 0 */
- }
scc_initialized = 1;
if (via_modem) {
for (;;) {
@@ -321,22 +174,6 @@
}
}
-#if 0
-extern int (*prom_entry)(void *);
-
-int
-xmon_exit(void)
-{
- struct prom_args {
- char *service;
- } args;
-
- for (;;) {
- args.service = "exit";
- (*prom_entry)(&args);
- }
-}
-#endif
void *xmon_stdin;
void *xmon_stdout;
diff --git a/arch/ppc/xmon/xmon.c b/arch/ppc/xmon/xmon.c
index bdaf659..06fa44b 100644
--- a/arch/ppc/xmon/xmon.c
+++ b/arch/ppc/xmon/xmon.c
@@ -12,8 +12,6 @@
#include <linux/kallsyms.h>
#include <asm/ptrace.h>
#include <asm/string.h>
-#include <asm/prom.h>
-#include <asm/bootx.h>
#include <asm/machdep.h>
#include <asm/xmon.h>
#include "nonstdio.h"
@@ -101,9 +99,6 @@
static void cpu_cmd(void);
#endif /* CONFIG_SMP */
static void csum(void);
-#ifdef CONFIG_BOOTX_TEXT
-static void vidcmds(void);
-#endif
static void bootcmds(void);
static void proccall(void);
static void printtime(void);
@@ -522,11 +517,6 @@
cpu_cmd();
break;
#endif /* CONFIG_SMP */
-#ifdef CONFIG_BOOTX_TEXT
- case 'v':
- vidcmds();
- break;
-#endif
case 'z':
bootcmds();
break;
@@ -618,43 +608,6 @@
}
#endif /* CONFIG_SMP */
-#ifdef CONFIG_BOOTX_TEXT
-extern boot_infos_t disp_bi;
-
-static void vidcmds(void)
-{
- int c = inchar();
- unsigned int val, w;
- extern int boot_text_mapped;
-
- if (!boot_text_mapped)
- return;
- if (c != '\n' && scanhex(&val)) {
- switch (c) {
- case 'd':
- w = disp_bi.dispDeviceRowBytes
- / (disp_bi.dispDeviceDepth >> 3);
- disp_bi.dispDeviceDepth = val;
- disp_bi.dispDeviceRowBytes = w * (val >> 3);
- return;
- case 'p':
- disp_bi.dispDeviceRowBytes = val;
- return;
- case 'w':
- disp_bi.dispDeviceRect[2] = val;
- return;
- case 'h':
- disp_bi.dispDeviceRect[3] = val;
- return;
- }
- }
- printf("W = %d (0x%x) H = %d (0x%x) D = %d (0x%x) P = %d (0x%x)\n",
- disp_bi.dispDeviceRect[2], disp_bi.dispDeviceRect[2],
- disp_bi.dispDeviceRect[3], disp_bi.dispDeviceRect[3],
- disp_bi.dispDeviceDepth, disp_bi.dispDeviceDepth,
- disp_bi.dispDeviceRowBytes, disp_bi.dispDeviceRowBytes);
-}
-#endif /* CONFIG_BOOTX_TEXT */
static unsigned short fcstab[256] = {
0x0000, 0x1189, 0x2312, 0x329b, 0x4624, 0x57ad, 0x6536, 0x74bf,
@@ -1020,7 +973,6 @@
}
#else
-#ifndef CONFIG_PPC64BRIDGE
static void
dump_hash_table_seg(unsigned seg, unsigned start, unsigned end)
{
@@ -1079,66 +1031,6 @@
printf(" ... %x\n", last_va);
}
-#else /* CONFIG_PPC64BRIDGE */
-static void
-dump_hash_table_seg(unsigned seg, unsigned start, unsigned end)
-{
- extern void *Hash;
- extern unsigned long Hash_size;
- unsigned *htab = Hash;
- unsigned hsize = Hash_size;
- unsigned v, hmask, va, last_va;
- int found, last_found, i;
- unsigned *hg, w1, last_w2, last_va0;
-
- last_found = 0;
- hmask = hsize / 128 - 1;
- va = start;
- start = (start >> 12) & 0xffff;
- end = (end >> 12) & 0xffff;
- for (v = start; v < end; ++v) {
- found = 0;
- hg = htab + (((v ^ seg) & hmask) * 32);
- w1 = 1 | (seg << 12) | ((v & 0xf800) >> 4);
- for (i = 0; i < 8; ++i, hg += 4) {
- if (hg[1] == w1) {
- found = 1;
- break;
- }
- }
- if (!found) {
- w1 ^= 2;
- hg = htab + ((~(v ^ seg) & hmask) * 32);
- for (i = 0; i < 8; ++i, hg += 4) {
- if (hg[1] == w1) {
- found = 1;
- break;
- }
- }
- }
- if (!(last_found && found && (hg[3] & ~0x180) == last_w2 + 4096)) {
- if (last_found) {
- if (last_va != last_va0)
- printf(" ... %x", last_va);
- printf("\n");
- }
- if (found) {
- printf("%x to %x", va, hg[3]);
- last_va0 = va;
- }
- last_found = found;
- }
- if (found) {
- last_w2 = hg[3] & ~0x180;
- last_va = va;
- }
- va += 4096;
- }
- if (last_found)
- printf(" ... %x\n", last_va);
-}
-#endif /* CONFIG_PPC64BRIDGE */
-
static unsigned hash_ctx;
static unsigned hash_start;
static unsigned hash_end;
diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S
index 615964c..50e8013 100644
--- a/arch/s390/kernel/compat_wrapper.S
+++ b/arch/s390/kernel/compat_wrapper.S
@@ -1552,6 +1552,7 @@
llgtr %r3,%r3 # const char *
lgfr %r4,%r4 # int
llgtr %r5,%r5 # const char *
+ lgfr %r6,%r6 # int
jg sys_linkat
.globl sys_symlinkat_wrapper
diff --git a/arch/sparc64/Kconfig b/arch/sparc64/Kconfig
index ab733be..4c0a50a 100644
--- a/arch/sparc64/Kconfig
+++ b/arch/sparc64/Kconfig
@@ -383,6 +383,7 @@
config KPROBES
bool "Kprobes (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && MODULES
help
Kprobes allows you to trap at almost any kernel address and
execute a callback function. register_kprobe() establishes
diff --git a/arch/sparc64/kernel/setup.c b/arch/sparc64/kernel/setup.c
index 054461e..158bd31 100644
--- a/arch/sparc64/kernel/setup.c
+++ b/arch/sparc64/kernel/setup.c
@@ -542,6 +542,8 @@
}
#endif
+ smp_setup_cpu_possible_map();
+
paging_init();
}
diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c
index 1fb6323..1f7ad8a 100644
--- a/arch/sparc64/kernel/smp.c
+++ b/arch/sparc64/kernel/smp.c
@@ -1079,18 +1079,12 @@
return 0;
}
+/* Constrain the number of cpus to max_cpus. */
void __init smp_prepare_cpus(unsigned int max_cpus)
{
- int instance, mid;
-
- instance = 0;
- while (!cpu_find_by_instance(instance, NULL, &mid)) {
- if (mid < max_cpus)
- cpu_set(mid, phys_cpu_present_map);
- instance++;
- }
-
if (num_possible_cpus() > max_cpus) {
+ int instance, mid;
+
instance = 0;
while (!cpu_find_by_instance(instance, NULL, &mid)) {
if (mid != boot_cpu_id) {
@@ -1105,6 +1099,22 @@
smp_store_cpu_info(boot_cpu_id);
}
+/* Set this up early so that things like the scheduler can init
+ * properly. We use the same cpu mask for both the present and
+ * possible cpu map.
+ */
+void __init smp_setup_cpu_possible_map(void)
+{
+ int instance, mid;
+
+ instance = 0;
+ while (!cpu_find_by_instance(instance, NULL, &mid)) {
+ if (mid < NR_CPUS)
+ cpu_set(mid, phys_cpu_present_map);
+ instance++;
+ }
+}
+
void __devinit smp_prepare_boot_cpu(void)
{
if (hard_smp_processor_id() >= NR_CPUS) {
diff --git a/arch/um/drivers/cow.h b/arch/um/drivers/cow.h
index dc36b22..04e3958 100644
--- a/arch/um/drivers/cow.h
+++ b/arch/um/drivers/cow.h
@@ -46,7 +46,7 @@
extern int read_cow_header(int (*reader)(__u64, char *, int, void *),
void *arg, __u32 *version_out,
char **backing_file_out, time_t *mtime_out,
- unsigned long long *size_out, int *sectorsize_out,
+ __u64 *size_out, int *sectorsize_out,
__u32 *align_out, int *bitmap_offset_out);
extern int write_cow_header(char *cow_file, int fd, char *backing_file,
diff --git a/arch/um/drivers/cow_sys.h b/arch/um/drivers/cow_sys.h
index c83fc5d..94de4ea 100644
--- a/arch/um/drivers/cow_sys.h
+++ b/arch/um/drivers/cow_sys.h
@@ -23,17 +23,17 @@
return(uml_strdup(str));
}
-static inline int cow_seek_file(int fd, unsigned long long offset)
+static inline int cow_seek_file(int fd, __u64 offset)
{
return(os_seek_file(fd, offset));
}
-static inline int cow_file_size(char *file, unsigned long long *size_out)
+static inline int cow_file_size(char *file, __u64 *size_out)
{
return(os_file_size(file, size_out));
}
-static inline int cow_write_file(int fd, char *buf, int size)
+static inline int cow_write_file(int fd, void *buf, int size)
{
return(os_write_file(fd, buf, size));
}
diff --git a/arch/um/drivers/cow_user.c b/arch/um/drivers/cow_user.c
index fbe2217..61951b7 100644
--- a/arch/um/drivers/cow_user.c
+++ b/arch/um/drivers/cow_user.c
@@ -176,7 +176,7 @@
err = -ENOMEM;
header = cow_malloc(sizeof(*header));
if(header == NULL){
- cow_printf("Failed to allocate COW V3 header\n");
+ cow_printf("write_cow_header - failed to allocate COW V3 header\n");
goto out;
}
header->magic = htonl(COW_MAGIC);
@@ -196,15 +196,17 @@
err = os_file_modtime(header->backing_file, &modtime);
if(err < 0){
- cow_printf("Backing file '%s' mtime request failed, "
- "err = %d\n", header->backing_file, -err);
+ cow_printf("write_cow_header - backing file '%s' mtime "
+ "request failed, err = %d\n", header->backing_file,
+ -err);
goto out_free;
}
err = cow_file_size(header->backing_file, size);
if(err < 0){
- cow_printf("Couldn't get size of backing file '%s', "
- "err = %d\n", header->backing_file, -err);
+ cow_printf("write_cow_header - couldn't get size of "
+ "backing file '%s', err = %d\n",
+ header->backing_file, -err);
goto out_free;
}
@@ -214,10 +216,11 @@
header->alignment = htonl(alignment);
header->cow_format = COW_BITMAP;
- err = os_write_file(fd, header, sizeof(*header));
+ err = cow_write_file(fd, header, sizeof(*header));
if(err != sizeof(*header)){
- cow_printf("Write of header to new COW file '%s' failed, "
- "err = %d\n", cow_file, -err);
+ cow_printf("write_cow_header - write of header to "
+ "new COW file '%s' failed, err = %d\n", cow_file,
+ -err);
goto out_free;
}
err = 0;
@@ -299,7 +302,7 @@
}
else if(version == 3){
if(n < sizeof(header->v3)){
- cow_printf("read_cow_header - failed to read V2 "
+ cow_printf("read_cow_header - failed to read V3 "
"header\n");
goto out;
}
@@ -359,7 +362,8 @@
if(err != sizeof(zero)){
cow_printf("Write of bitmap to new COW file '%s' failed, "
"err = %d\n", cow_file, -err);
- err = -EINVAL;
+ if (err >= 0)
+ err = -EINVAL;
goto out;
}
diff --git a/arch/um/drivers/net_user.c b/arch/um/drivers/net_user.c
index 098fa65..0e2f061 100644
--- a/arch/um/drivers/net_user.c
+++ b/arch/um/drivers/net_user.c
@@ -47,10 +47,12 @@
}
}
+/* Do reliable error handling as this fails frequently enough. */
void read_output(int fd, char *output, int len)
{
- int remain, n, actual;
+ int remain, ret, expected;
char c;
+ char *str;
if(output == NULL){
output = &c;
@@ -58,23 +60,31 @@
}
*output = '\0';
- n = os_read_file(fd, &remain, sizeof(remain));
- if(n != sizeof(remain)){
- printk("read_output - read of length failed, err = %d\n", -n);
- return;
+ ret = os_read_file(fd, &remain, sizeof(remain));
+
+ if (ret != sizeof(remain)) {
+ expected = sizeof(remain);
+ str = "length";
+ goto err;
}
while(remain != 0){
- n = (remain < len) ? remain : len;
- actual = os_read_file(fd, output, n);
- if(actual != n){
- printk("read_output - read of data failed, "
- "err = %d\n", -actual);
- return;
+ expected = (remain < len) ? remain : len;
+ ret = os_read_file(fd, output, expected);
+ if (ret != expected) {
+ str = "data";
+ goto err;
}
- remain -= actual;
+ remain -= ret;
}
+
return;
+
+err:
+ if (ret < 0)
+ printk("read_output - read of %s failed, errno = %d\n", str, -ret);
+ else
+ printk("read_output - read of %s failed, read only %d of %d bytes\n", str, ret, expected);
}
int net_read(int fd, void *buf, int len)
diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c
index 101efd2..fa617e0 100644
--- a/arch/um/drivers/ubd_kern.c
+++ b/arch/um/drivers/ubd_kern.c
@@ -1135,7 +1135,7 @@
static int backing_file_mismatch(char *file, __u64 size, time_t mtime)
{
unsigned long modtime;
- long long actual;
+ unsigned long long actual;
int err;
err = os_file_modtime(file, &modtime);
diff --git a/arch/um/include/init.h b/arch/um/include/init.h
index cbd79a8..d4de7c0 100644
--- a/arch/um/include/init.h
+++ b/arch/um/include/init.h
@@ -122,7 +122,7 @@
#define __exitcall(fn) static exitcall_t __exitcall_##fn __exit_call = fn
-#define __init_call __attribute__ ((unused,__section__ (".initcall.init")))
+#define __init_call __attribute_used__ __attribute__ ((__section__ (".initcall.init")))
#endif
diff --git a/arch/um/include/os.h b/arch/um/include/os.h
index eb1710b..2a1c64d 100644
--- a/arch/um/include/os.h
+++ b/arch/um/include/os.h
@@ -179,8 +179,11 @@
extern void os_kill_process(int pid, int reap_child);
extern void os_kill_ptraced_process(int pid, int reap_child);
extern void os_usr1_process(int pid);
+extern long os_ptrace_ldt(long pid, long addr, long data);
+
extern int os_getpid(void);
extern int os_getpgrp(void);
+
extern void init_new_thread_stack(void *sig_stack, void (*usr1_handler)(int));
extern void init_new_thread_signals(int altstack);
extern int run_kernel_thread(int (*fn)(void *), void *arg, void **jmp_ptr);
diff --git a/arch/um/os-Linux/file.c b/arch/um/os-Linux/file.c
index f55773c..3bd10de 100644
--- a/arch/um/os-Linux/file.c
+++ b/arch/um/os-Linux/file.c
@@ -272,14 +272,23 @@
snprintf(sock.sun_path, sizeof(sock.sun_path), "%s", name);
fd = socket(AF_UNIX, SOCK_STREAM, 0);
- if(fd < 0)
- return(fd);
+ if(fd < 0) {
+ err = -errno;
+ goto out;
+ }
err = connect(fd, (struct sockaddr *) &sock, sizeof(sock));
- if(err)
- return(-errno);
+ if(err) {
+ err = -errno;
+ goto out_close;
+ }
- return(fd);
+ return fd;
+
+out_close:
+ close(fd);
+out:
+ return err;
}
void os_close_file(int fd)
diff --git a/arch/um/os-Linux/process.c b/arch/um/os-Linux/process.c
index 7f5e2da..d261888 100644
--- a/arch/um/os-Linux/process.c
+++ b/arch/um/os-Linux/process.c
@@ -19,6 +19,7 @@
#include "irq_user.h"
#include "kern_util.h"
#include "longjmp.h"
+#include "skas_ptrace.h"
#define ARBITRARY_ADDR -1
#define FAILURE_PID -1
@@ -100,6 +101,21 @@
}
+/* This is here uniquely to have access to the userspace errno, i.e. the one
+ * used by ptrace in case of error.
+ */
+
+long os_ptrace_ldt(long pid, long addr, long data)
+{
+ int ret;
+
+ ret = ptrace(PTRACE_LDT, pid, addr, data);
+
+ if (ret < 0)
+ return -errno;
+ return ret;
+}
+
/* Kill off a ptraced child by all means available. kill it normally first,
* then PTRACE_KILL it, then PTRACE_CONT it in case it's in a run state from
* which it can't exit directly.
diff --git a/arch/um/sys-i386/ldt.c b/arch/um/sys-i386/ldt.c
index 1fa09a7..fe0877b 100644
--- a/arch/um/sys-i386/ldt.c
+++ b/arch/um/sys-i386/ldt.c
@@ -107,7 +107,7 @@
* So we need to switch child's mm into our userspace, then
* later switch back.
*
- * Note: I'm unshure: should interrupts be disabled here?
+ * Note: I'm unsure: should interrupts be disabled here?
*/
if(!current->active_mm || current->active_mm == &init_mm ||
mm_idp != ¤t->active_mm->context.skas.id)
@@ -129,9 +129,7 @@
pid = userspace_pid[cpu];
}
- res = ptrace(PTRACE_LDT, pid, 0, (unsigned long) &ldt_op);
- if(res)
- res = errno;
+ res = os_ptrace_ldt(pid, 0, (unsigned long) &ldt_op);
if(proc_mm)
put_cpu();
@@ -181,8 +179,7 @@
*/
cpu = get_cpu();
- res = ptrace(PTRACE_LDT, userspace_pid[cpu], 0,
- (unsigned long) &ptrace_ldt);
+ res = os_ptrace_ldt(userspace_pid[cpu], 0, (unsigned long) &ptrace_ldt);
put_cpu();
if(res < 0)
goto out;
diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig
index 2f9deca..e18eb79 100644
--- a/arch/x86_64/Kconfig
+++ b/arch/x86_64/Kconfig
@@ -354,21 +354,6 @@
as it is off-chip. You can find the HPET spec at
<http://www.intel.com/hardwaredesign/hpetspec.htm>.
-config X86_PM_TIMER
- bool "PM timer" if EMBEDDED
- depends on ACPI
- default y
- help
- Support the ACPI PM timer for time keeping. This is slow,
- but is useful on some chipsets without HPET on systems with more
- than one CPU. On a single processor or single socket multi core
- system it is normally not required.
- When the PM timer is active 64bit vsyscalls are disabled
- and should not be enabled (/proc/sys/kernel/vsyscall64 should
- not be changed).
- The kernel selects the PM timer only as a last resort, so it is
- useful to enable just in case.
-
config HPET_EMULATE_RTC
bool "Provide RTC interrupt"
depends on HPET_TIMER && RTC=y
@@ -592,6 +577,7 @@
config KPROBES
bool "Kprobes (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && MODULES
help
Kprobes allows you to trap at almost any kernel address and
execute a callback function. register_kprobe() establishes
diff --git a/arch/x86_64/kernel/Makefile b/arch/x86_64/kernel/Makefile
index 72fe60c..a098a11 100644
--- a/arch/x86_64/kernel/Makefile
+++ b/arch/x86_64/kernel/Makefile
@@ -43,7 +43,7 @@
bootflag-y += ../../i386/kernel/bootflag.o
cpuid-$(subst m,y,$(CONFIG_X86_CPUID)) += ../../i386/kernel/cpuid.o
-topology-y += ../../i386/mach-default/topology.o
+topology-y += ../../i386/kernel/topology.o
microcode-$(subst m,y,$(CONFIG_MICROCODE)) += ../../i386/kernel/microcode.o
intel_cacheinfo-y += ../../i386/kernel/cpu/intel_cacheinfo.o
quirks-y += ../../i386/kernel/quirks.o
diff --git a/arch/x86_64/kernel/aperture.c b/arch/x86_64/kernel/aperture.c
index e4e2b7d..a0f955b 100644
--- a/arch/x86_64/kernel/aperture.c
+++ b/arch/x86_64/kernel/aperture.c
@@ -248,7 +248,7 @@
/* Got the aperture from the AGP bridge */
} else if (swiotlb && !valid_agp) {
/* Do nothing */
- } else if ((!no_iommu && end_pfn >= MAX_DMA32_PFN) ||
+ } else if ((!no_iommu && end_pfn > MAX_DMA32_PFN) ||
force_iommu ||
valid_agp ||
fallback_aper_force) {
diff --git a/arch/x86_64/kernel/apic.c b/arch/x86_64/kernel/apic.c
index e5b14c5..d70605e 100644
--- a/arch/x86_64/kernel/apic.c
+++ b/arch/x86_64/kernel/apic.c
@@ -962,12 +962,14 @@
irq_exit();
}
+int __initdata unsync_tsc_on_multicluster;
+
/*
* oem_force_hpet_timer -- force HPET mode for some boxes.
*
* Thus far, the major user of this is IBM's Summit2 series:
*
- * Clustered boxes may have unsynced TSC problems if they are
+ * Some clustered boxes may have unsynced TSC problems if they are
* multi-chassis. Use available data to take a good guess.
* If in doubt, go HPET.
*/
@@ -977,6 +979,11 @@
unsigned id;
DECLARE_BITMAP(clustermap, NUM_APIC_CLUSTERS);
+ /* Only do this check on IBM machines - big Unisys systems
+ use multiple clusters too, but have synchronized TSC */
+ if (!unsync_tsc_on_multicluster)
+ return 0;
+
bitmap_zero(clustermap, NUM_APIC_CLUSTERS);
for (i = 0; i < NR_CPUS; i++) {
diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c
index 2585c1d..ffed464 100644
--- a/arch/x86_64/kernel/io_apic.c
+++ b/arch/x86_64/kernel/io_apic.c
@@ -50,6 +50,8 @@
int disable_timer_pin_1 __initdata;
+int timer_over_8254 __initdata = 1;
+
/* Where if anywhere is the i8259 connect in external int mode */
static struct { int pin, apic; } ioapic_i8259 = { -1, -1 };
@@ -251,6 +253,20 @@
__setup("noapic", disable_ioapic_setup);
__setup("apic", enable_ioapic_setup);
+static int __init setup_disable_8254_timer(char *s)
+{
+ timer_over_8254 = -1;
+ return 1;
+}
+static int __init setup_enable_8254_timer(char *s)
+{
+ timer_over_8254 = 2;
+ return 1;
+}
+
+__setup("disable_8254_timer", setup_disable_8254_timer);
+__setup("enable_8254_timer", setup_enable_8254_timer);
+
#include <asm/pci-direct.h>
#include <linux/pci_ids.h>
#include <linux/pci.h>
@@ -309,27 +325,20 @@
#endif
/* RED-PEN skip them on mptables too? */
return;
+
+ /* This should be actually default, but
+ for 2.6.16 let's do it for ATI only where
+ it's really needed. */
case PCI_VENDOR_ID_ATI:
- if (apic_runs_main_timer != 0)
- break;
-#ifdef CONFIG_ACPI
- /* Don't do this for laptops right
- right now because their timer
- doesn't necessarily tick in C2/3 */
- if (acpi_fadt.revision >= 3 &&
- (acpi_fadt.plvl2_lat + acpi_fadt.plvl3_lat) < 1100) {
- printk(KERN_INFO
-"ATI board detected, but seems to be a laptop. Timer might be shakey, sorry\n");
- break;
- }
-#endif
+ if (timer_over_8254 == 1) {
+ timer_over_8254 = 0;
printk(KERN_INFO
- "ATI board detected. Using APIC/PM timer.\n");
- apic_runs_main_timer = 1;
- nohpet = 1;
+ "ATI board detected. Disabling timer routing over 8254.\n");
+ }
return;
}
+
/* No multi-function device? */
type = read_pci_config_byte(num,slot,func,
PCI_HEADER_TYPE);
@@ -1773,6 +1782,8 @@
* a wide range of boards and BIOS bugs. Fortunately only the timer IRQ
* is so screwy. Thanks to Brian Perkins for testing/hacking this beast
* fanatically on his truly buggy board.
+ *
+ * FIXME: really need to revamp this for modern platforms only.
*/
static inline void check_timer(void)
{
@@ -1795,7 +1806,8 @@
*/
apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
init_8259A(1);
- enable_8259A_irq(0);
+ if (timer_over_8254 > 0)
+ enable_8259A_irq(0);
pin1 = find_isa_irq_pin(0, mp_INT);
apic1 = find_isa_irq_apic(0, mp_INT);
@@ -1850,7 +1862,7 @@
}
printk(" failed.\n");
- if (nmi_watchdog) {
+ if (nmi_watchdog == NMI_IO_APIC) {
printk(KERN_WARNING "timer doesn't work through the IO-APIC - disabling NMI Watchdog!\n");
nmi_watchdog = 0;
}
diff --git a/arch/x86_64/kernel/pci-gart.c b/arch/x86_64/kernel/pci-gart.c
index dd0718d..0c3f052 100644
--- a/arch/x86_64/kernel/pci-gart.c
+++ b/arch/x86_64/kernel/pci-gart.c
@@ -228,11 +228,6 @@
int mmu = high;
if (force_iommu)
mmu = 1;
- if (no_iommu) {
- if (high)
- panic("PCI-DMA: high address but no IOMMU.\n");
- mmu = 0;
- }
return mmu;
}
@@ -241,11 +236,6 @@
u64 mask = *dev->dma_mask;
int high = addr + size >= mask;
int mmu = high;
- if (no_iommu) {
- if (high)
- panic("PCI-DMA: high address but no IOMMU.\n");
- mmu = 0;
- }
return mmu;
}
@@ -310,7 +300,7 @@
for (i = 0; i < nents; i++) {
struct scatterlist *s = &sg[i];
- if (!s->dma_length)
+ if (!s->dma_length || !s->length)
break;
dma_unmap_single(dev, s->dma_address, s->dma_length, dir);
}
@@ -364,6 +354,7 @@
BUG_ON(i > start && s->offset);
if (i == start) {
+ *sout = *s;
sout->dma_address = iommu_bus_base;
sout->dma_address += iommu_page*PAGE_SIZE + s->offset;
sout->dma_length = s->length;
@@ -390,6 +381,7 @@
{
if (!need) {
BUG_ON(stopat - start != 1);
+ *sout = sg[start];
sout->dma_length = sg[start].length;
return 0;
}
@@ -632,17 +624,13 @@
(agp_copy_info(agp_bridge, &info) < 0);
#endif
- if (swiotlb) {
- no_iommu = 1;
+ if (swiotlb)
return -1;
- }
-
+
if (no_iommu ||
(!force_iommu && end_pfn <= MAX_DMA32_PFN) ||
!iommu_aperture ||
(no_agp && init_k8_gatt(&info) < 0)) {
- no_iommu = 1;
- no_iommu_init();
printk(KERN_INFO "PCI-DMA: Disabling IOMMU.\n");
if (end_pfn > MAX_DMA32_PFN) {
printk(KERN_ERR "WARNING more than 4GB of memory "
diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c
index 9435ab7..aa55e3c 100644
--- a/arch/x86_64/kernel/setup.c
+++ b/arch/x86_64/kernel/setup.c
@@ -423,6 +423,12 @@
else if(!memcmp(from, "elfcorehdr=", 11))
elfcorehdr_addr = memparse(from+11, &from);
#endif
+
+#ifdef CONFIG_HOTPLUG_CPU
+ else if (!memcmp(from, "additional_cpus=", 16))
+ setup_additional_cpus(from+16);
+#endif
+
next_char:
c = *(from++);
if (!c)
diff --git a/arch/x86_64/kernel/smpboot.c b/arch/x86_64/kernel/smpboot.c
index 67e4e28..66e9865 100644
--- a/arch/x86_64/kernel/smpboot.c
+++ b/arch/x86_64/kernel/smpboot.c
@@ -1152,8 +1152,6 @@
setup_ioapic_dest();
#endif
- time_init_gtod();
-
check_nmi_watchdog();
}
@@ -1244,7 +1242,7 @@
printk(KERN_ERR "CPU %u didn't die...\n", cpu);
}
-static __init int setup_additional_cpus(char *s)
+__init int setup_additional_cpus(char *s)
{
return get_option(&s, &additional_cpus);
}
diff --git a/arch/x86_64/kernel/time.c b/arch/x86_64/kernel/time.c
index 67841d1..3080f84 100644
--- a/arch/x86_64/kernel/time.c
+++ b/arch/x86_64/kernel/time.c
@@ -48,6 +48,8 @@
extern void i8254_timer_resume(void);
extern int using_apic_timer;
+static char *time_init_gtod(void);
+
DEFINE_SPINLOCK(rtc_lock);
DEFINE_SPINLOCK(i8253_lock);
@@ -901,6 +903,7 @@
void __init time_init(void)
{
char *timename;
+ char *gtod;
#ifdef HPET_HACK_ENABLE_DANGEROUS
if (!vxtime.hpet_address) {
@@ -945,21 +948,19 @@
timename = "PIT";
}
- printk(KERN_INFO "time.c: Using %ld.%06ld MHz %s timer.\n",
- vxtime_hz / 1000000, vxtime_hz % 1000000, timename);
+ vxtime.mode = VXTIME_TSC;
+ gtod = time_init_gtod();
+
+ printk(KERN_INFO "time.c: Using %ld.%06ld MHz WALL %s GTOD %s timer.\n",
+ vxtime_hz / 1000000, vxtime_hz % 1000000, timename, gtod);
printk(KERN_INFO "time.c: Detected %d.%03d MHz processor.\n",
cpu_khz / 1000, cpu_khz % 1000);
- vxtime.mode = VXTIME_TSC;
vxtime.quot = (1000000L << 32) / vxtime_hz;
vxtime.tsc_quot = (1000L << 32) / cpu_khz;
vxtime.last_tsc = get_cycles_sync();
setup_irq(0, &irq0);
set_cyc2ns_scale(cpu_khz);
-
-#ifndef CONFIG_SMP
- time_init_gtod();
-#endif
}
/*
@@ -981,9 +982,9 @@
}
/*
- * Decide after all CPUs are booted what mode gettimeofday should use.
+ * Decide what mode gettimeofday should use.
*/
-void __init time_init_gtod(void)
+__init static char *time_init_gtod(void)
{
char *timetype;
@@ -1011,8 +1012,7 @@
timetype = hpet_use_timer ? "HPET/TSC" : "PIT/TSC";
vxtime.mode = VXTIME_TSC;
}
-
- printk(KERN_INFO "time.c: Using %s based timekeeping.\n", timetype);
+ return timetype;
}
__setup("report_lost_ticks", time_setup);
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index 0cce28c..33e2ca8 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -247,7 +247,7 @@
Enter the full path name to the file wich includes the AmlCode declaration.
config ACPI_BLACKLIST_YEAR
- int "Disable ACPI for systems before Jan 1st this year" if X86
+ int "Disable ACPI for systems before Jan 1st this year" if X86_32
default 0
help
enter a 4-digit year, eg. 2001 to disable ACPI by default
@@ -285,9 +285,8 @@
dump your ACPI DSDT table using /proc/acpi/dsdt.
config X86_PM_TIMER
- bool "Power Management Timer Support"
+ bool "Power Management Timer Support" if EMBEDDED
depends on X86
- depends on !X86_64
default y
help
The Power Management Timer is available on all ACPI-capable,
@@ -298,9 +297,8 @@
voltage scaling, unlike the commonly used Time Stamp Counter
(TSC) timing source.
- So, if you see messages like 'Losing too many ticks!' in the
- kernel logs, and/or you are using this on a notebook which
- does not yet have an HPET, you should say "Y" here.
+ You should nearly always say Y here because many modern
+ systems require this timer.
config ACPI_CONTAINER
tristate "ACPI0004,PNP0A05 and PNP0A06 Container Driver (EXPERIMENTAL)"
diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c
index 1994a92..f65b2e1 100644
--- a/drivers/char/hvc_console.c
+++ b/drivers/char/hvc_console.c
@@ -335,6 +335,8 @@
} /* else count == 0 */
tty->driver_data = hp;
+ tty->low_latency = 1; /* Makes flushes to ldisc synchronous. */
+
hp->tty = tty;
/* Save for request_irq outside of spin_lock. */
irq = hp->irq;
@@ -633,9 +635,6 @@
tty_insert_flip_char(tty, buf[i], 0);
}
- if (count)
- tty_schedule_flip(tty);
-
/*
* Account for the total amount read in one loop, and if above
* 64 bytes, we do a quick schedule loop to let the tty grok
@@ -656,6 +655,9 @@
bail:
spin_unlock_irqrestore(&hp->lock, flags);
+ if (read_total)
+ tty_flip_buffer_push(tty);
+
return poll_mask;
}
diff --git a/drivers/char/sx.c b/drivers/char/sx.c
index c2490e2..588e75e 100644
--- a/drivers/char/sx.c
+++ b/drivers/char/sx.c
@@ -2173,15 +2173,17 @@
if ( IS_SI1_BOARD(board)) {
/* This should be an SI1 board, which has this
location writable... */
- if (read_sx_byte (board, SI2_ISA_ID_BASE) != 0x10)
+ if (read_sx_byte (board, SI2_ISA_ID_BASE) != 0x10) {
func_exit ();
return 0;
+ }
} else {
/* This should be an SI2 board, which has the bottom
3 bits non-writable... */
- if (read_sx_byte (board, SI2_ISA_ID_BASE) == 0x10)
+ if (read_sx_byte (board, SI2_ISA_ID_BASE) == 0x10) {
func_exit ();
return 0;
+ }
}
/* Now we're pretty much convinced that there is an SI board here,
@@ -2192,15 +2194,17 @@
if ( IS_SI1_BOARD(board)) {
/* This should be an SI1 board, which has this
location writable... */
- if (read_sx_byte (board, SI2_ISA_ID_BASE) != 0x10)
+ if (read_sx_byte (board, SI2_ISA_ID_BASE) != 0x10) {
func_exit();
return 0;
+ }
} else {
/* This should be an SI2 board, which has the bottom
3 bits non-writable... */
- if (read_sx_byte (board, SI2_ISA_ID_BASE) == 0x10)
+ if (read_sx_byte (board, SI2_ISA_ID_BASE) == 0x10) {
func_exit ();
return 0;
+ }
}
printheader ();
diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c
index c2c776f..eca92eb 100644
--- a/drivers/ieee1394/sbp2.c
+++ b/drivers/ieee1394/sbp2.c
@@ -137,15 +137,15 @@
/*
* SCSI inquiry hack for really badly behaved sbp2 devices. Turn this on
* if your sbp2 device is not properly handling the SCSI inquiry command.
- * This hack makes the inquiry look more like a typical MS Windows
- * inquiry.
+ * This hack makes the inquiry look more like a typical MS Windows inquiry
+ * by enforcing 36 byte inquiry and avoiding access to mode_sense page 8.
*
* If force_inquiry_hack=1 is required for your device to work,
* please submit the logged sbp2_firmware_revision value of this device to
* the linux1394-devel mailing list.
*/
static int force_inquiry_hack;
-module_param(force_inquiry_hack, int, 0444);
+module_param(force_inquiry_hack, int, 0644);
MODULE_PARM_DESC(force_inquiry_hack, "Force SCSI inquiry hack (default = 0)");
/*
@@ -264,18 +264,17 @@
},
};
-
-/* List of device firmware's that require a forced 36 byte inquiry. */
+/*
+ * List of device firmwares that require the inquiry hack.
+ * Yields a few false positives but did not break other devices so far.
+ */
static u32 sbp2_broken_inquiry_list[] = {
- 0x00002800, /* Stefan Richter <richtest@bauwesen.tu-cottbus.de> */
+ 0x00002800, /* Stefan Richter <stefanr@s5r6.in-berlin.de> */
/* DViCO Momobay CX-1 */
0x00000200 /* Andreas Plesch <plesch@fas.harvard.edu> */
/* QPS Fire DVDBurner */
};
-#define NUM_BROKEN_INQUIRY_DEVS \
- (sizeof(sbp2_broken_inquiry_list)/sizeof(*sbp2_broken_inquiry_list))
-
/**************************************
* General utility functions
**************************************/
@@ -643,9 +642,15 @@
if (!scsi_id)
return 0;
- /* Trigger shutdown functions in scsi's highlevel. */
- if (scsi_id->scsi_host)
+ if (scsi_id->scsi_host) {
+ /* Get rid of enqueued commands if there is no chance to
+ * send them. */
+ if (!sbp2util_node_is_available(scsi_id))
+ sbp2scsi_complete_all_commands(scsi_id, DID_NO_CONNECT);
+ /* scsi_remove_device() will trigger shutdown functions of SCSI
+ * highlevel drivers which would deadlock if blocked. */
scsi_unblock_requests(scsi_id->scsi_host);
+ }
sdev = scsi_id->sdev;
if (sdev) {
scsi_id->sdev = NULL;
@@ -742,11 +747,6 @@
hi->host = ud->ne->host;
INIT_LIST_HEAD(&hi->scsi_ids);
- /* Register our sbp2 status address space... */
- hpsb_register_addrspace(&sbp2_highlevel, ud->ne->host, &sbp2_ops,
- SBP2_STATUS_FIFO_ADDRESS,
- SBP2_STATUS_FIFO_ADDRESS +
- SBP2_STATUS_FIFO_ENTRY_TO_OFFSET(SBP2_MAX_UDS_PER_NODE+1));
#ifdef CONFIG_IEEE1394_SBP2_PHYS_DMA
/* Handle data movement if physical dma is not
* enabled/supportedon host controller */
@@ -759,6 +759,18 @@
list_add_tail(&scsi_id->scsi_list, &hi->scsi_ids);
+ /* Register the status FIFO address range. We could use the same FIFO
+ * for targets at different nodes. However we need different FIFOs per
+ * target in order to support multi-unit devices. */
+ scsi_id->status_fifo_addr = hpsb_allocate_and_register_addrspace(
+ &sbp2_highlevel, ud->ne->host, &sbp2_ops,
+ sizeof(struct sbp2_status_block), sizeof(quadlet_t),
+ ~0ULL, ~0ULL);
+ if (!scsi_id->status_fifo_addr) {
+ SBP2_ERR("failed to allocate status FIFO address range");
+ goto failed_alloc;
+ }
+
/* Register our host with the SCSI stack. */
scsi_host = scsi_host_alloc(&scsi_driver_template,
sizeof(unsigned long));
@@ -997,6 +1009,10 @@
SBP2_DMA_FREE("single query logins data");
}
+ if (scsi_id->status_fifo_addr)
+ hpsb_unregister_addrspace(&sbp2_highlevel, hi->host,
+ scsi_id->status_fifo_addr);
+
scsi_id->ud->device.driver_data = NULL;
SBP2_DEBUG("SBP-2 device removed, SCSI ID = %d", scsi_id->ud->id);
@@ -1075,11 +1091,10 @@
ORB_SET_QUERY_LOGINS_RESP_LENGTH(sizeof(struct sbp2_query_logins_response));
SBP2_DEBUG("sbp2_query_logins: reserved_resp_length initialized");
- scsi_id->query_logins_orb->status_FIFO_lo = SBP2_STATUS_FIFO_ADDRESS_LO +
- SBP2_STATUS_FIFO_ENTRY_TO_OFFSET(scsi_id->ud->id);
- scsi_id->query_logins_orb->status_FIFO_hi = (ORB_SET_NODE_ID(hi->host->node_id) |
- SBP2_STATUS_FIFO_ADDRESS_HI);
- SBP2_DEBUG("sbp2_query_logins: status FIFO initialized");
+ scsi_id->query_logins_orb->status_fifo_hi =
+ ORB_SET_STATUS_FIFO_HI(scsi_id->status_fifo_addr, hi->host->node_id);
+ scsi_id->query_logins_orb->status_fifo_lo =
+ ORB_SET_STATUS_FIFO_LO(scsi_id->status_fifo_addr);
sbp2util_cpu_to_be32_buffer(scsi_id->query_logins_orb, sizeof(struct sbp2_query_logins_orb));
@@ -1184,11 +1199,10 @@
ORB_SET_LOGIN_RESP_LENGTH(sizeof(struct sbp2_login_response));
SBP2_DEBUG("sbp2_login_device: passwd_resp_lengths initialized");
- scsi_id->login_orb->status_FIFO_lo = SBP2_STATUS_FIFO_ADDRESS_LO +
- SBP2_STATUS_FIFO_ENTRY_TO_OFFSET(scsi_id->ud->id);
- scsi_id->login_orb->status_FIFO_hi = (ORB_SET_NODE_ID(hi->host->node_id) |
- SBP2_STATUS_FIFO_ADDRESS_HI);
- SBP2_DEBUG("sbp2_login_device: status FIFO initialized");
+ scsi_id->login_orb->status_fifo_hi =
+ ORB_SET_STATUS_FIFO_HI(scsi_id->status_fifo_addr, hi->host->node_id);
+ scsi_id->login_orb->status_fifo_lo =
+ ORB_SET_STATUS_FIFO_LO(scsi_id->status_fifo_addr);
/*
* Byte swap ORB if necessary
@@ -1301,10 +1315,10 @@
scsi_id->logout_orb->login_ID_misc |= ORB_SET_NOTIFY(1);
scsi_id->logout_orb->reserved5 = 0x0;
- scsi_id->logout_orb->status_FIFO_lo = SBP2_STATUS_FIFO_ADDRESS_LO +
- SBP2_STATUS_FIFO_ENTRY_TO_OFFSET(scsi_id->ud->id);
- scsi_id->logout_orb->status_FIFO_hi = (ORB_SET_NODE_ID(hi->host->node_id) |
- SBP2_STATUS_FIFO_ADDRESS_HI);
+ scsi_id->logout_orb->status_fifo_hi =
+ ORB_SET_STATUS_FIFO_HI(scsi_id->status_fifo_addr, hi->host->node_id);
+ scsi_id->logout_orb->status_fifo_lo =
+ ORB_SET_STATUS_FIFO_LO(scsi_id->status_fifo_addr);
/*
* Byte swap ORB if necessary
@@ -1366,10 +1380,10 @@
scsi_id->reconnect_orb->login_ID_misc |= ORB_SET_NOTIFY(1);
scsi_id->reconnect_orb->reserved5 = 0x0;
- scsi_id->reconnect_orb->status_FIFO_lo = SBP2_STATUS_FIFO_ADDRESS_LO +
- SBP2_STATUS_FIFO_ENTRY_TO_OFFSET(scsi_id->ud->id);
- scsi_id->reconnect_orb->status_FIFO_hi =
- (ORB_SET_NODE_ID(hi->host->node_id) | SBP2_STATUS_FIFO_ADDRESS_HI);
+ scsi_id->reconnect_orb->status_fifo_hi =
+ ORB_SET_STATUS_FIFO_HI(scsi_id->status_fifo_addr, hi->host->node_id);
+ scsi_id->reconnect_orb->status_fifo_lo =
+ ORB_SET_STATUS_FIFO_LO(scsi_id->status_fifo_addr);
/*
* Byte swap ORB if necessary
@@ -1560,7 +1574,7 @@
/* Check for a blacklisted set of devices that require us to force
* a 36 byte host inquiry. This can be overriden as a module param
* (to force all hosts). */
- for (i = 0; i < NUM_BROKEN_INQUIRY_DEVS; i++) {
+ for (i = 0; i < ARRAY_SIZE(sbp2_broken_inquiry_list); i++) {
if ((firmware_revision & 0xffff00) ==
sbp2_broken_inquiry_list[i]) {
SBP2_WARN("Node " NODE_BUS_FMT ": Using 36byte inquiry workaround",
@@ -2007,18 +2021,6 @@
}
/*
- * The scsi stack sends down a request_bufflen which does not match the
- * length field in the scsi cdb. This causes some sbp2 devices to
- * reject this inquiry command. Fix the request_bufflen.
- */
- if (*cmd == INQUIRY) {
- if (force_inquiry_hack || scsi_id->workarounds & SBP2_BREAKAGE_INQUIRY_HACK)
- request_bufflen = cmd[4] = 0x24;
- else
- request_bufflen = cmd[4];
- }
-
- /*
* Now actually fill in the comamnd orb and sbp2 s/g list
*/
sbp2_create_command_orb(scsi_id, command, cmd, SCpnt->use_sg,
@@ -2106,7 +2108,6 @@
{
struct sbp2scsi_host_info *hi;
struct scsi_id_instance_data *scsi_id = NULL, *scsi_id_tmp;
- u32 id;
struct scsi_cmnd *SCpnt = NULL;
u32 scsi_status = SBP2_SCSI_STATUS_GOOD;
struct sbp2_command_info *command;
@@ -2129,12 +2130,12 @@
}
/*
- * Find our scsi_id structure by looking at the status fifo address written to by
- * the sbp2 device.
+ * Find our scsi_id structure by looking at the status fifo address
+ * written to by the sbp2 device.
*/
- id = SBP2_STATUS_FIFO_OFFSET_TO_ENTRY((u32)(addr - SBP2_STATUS_FIFO_ADDRESS));
list_for_each_entry(scsi_id_tmp, &hi->scsi_ids, scsi_list) {
- if (scsi_id_tmp->ne->nodeid == nodeid && scsi_id_tmp->ud->id == id) {
+ if (scsi_id_tmp->ne->nodeid == nodeid &&
+ scsi_id_tmp->status_fifo_addr == addr) {
scsi_id = scsi_id_tmp;
break;
}
@@ -2475,7 +2476,16 @@
static int sbp2scsi_slave_alloc(struct scsi_device *sdev)
{
- ((struct scsi_id_instance_data *)sdev->host->hostdata[0])->sdev = sdev;
+ struct scsi_id_instance_data *scsi_id =
+ (struct scsi_id_instance_data *)sdev->host->hostdata[0];
+
+ scsi_id->sdev = sdev;
+
+ if (force_inquiry_hack ||
+ scsi_id->workarounds & SBP2_BREAKAGE_INQUIRY_HACK) {
+ sdev->inquiry_len = 36;
+ sdev->skip_ms_page_8 = 1;
+ }
return 0;
}
diff --git a/drivers/ieee1394/sbp2.h b/drivers/ieee1394/sbp2.h
index 900ea1d..e2d357a 100644
--- a/drivers/ieee1394/sbp2.h
+++ b/drivers/ieee1394/sbp2.h
@@ -33,15 +33,17 @@
#define ORB_DIRECTION_NO_DATA_TRANSFER 0x2
#define ORB_SET_NULL_PTR(value) ((value & 0x1) << 31)
-#define ORB_SET_NOTIFY(value) ((value & 0x1) << 31)
-#define ORB_SET_RQ_FMT(value) ((value & 0x3) << 29) /* unused ? */
+#define ORB_SET_NOTIFY(value) ((value & 0x1) << 31)
+#define ORB_SET_RQ_FMT(value) ((value & 0x3) << 29) /* unused ? */
#define ORB_SET_NODE_ID(value) ((value & 0xffff) << 16)
-#define ORB_SET_DATA_SIZE(value) (value & 0xffff)
-#define ORB_SET_PAGE_SIZE(value) ((value & 0x7) << 16)
-#define ORB_SET_PAGE_TABLE_PRESENT(value) ((value & 0x1) << 19)
-#define ORB_SET_MAX_PAYLOAD(value) ((value & 0xf) << 20)
-#define ORB_SET_SPEED(value) ((value & 0x7) << 24)
-#define ORB_SET_DIRECTION(value) ((value & 0x1) << 27)
+#define ORB_SET_STATUS_FIFO_HI(value, id) (value >> 32 | ORB_SET_NODE_ID(id))
+#define ORB_SET_STATUS_FIFO_LO(value) (value & 0xffffffff)
+#define ORB_SET_DATA_SIZE(value) (value & 0xffff)
+#define ORB_SET_PAGE_SIZE(value) ((value & 0x7) << 16)
+#define ORB_SET_PAGE_TABLE_PRESENT(value) ((value & 0x1) << 19)
+#define ORB_SET_MAX_PAYLOAD(value) ((value & 0xf) << 20)
+#define ORB_SET_SPEED(value) ((value & 0x7) << 24)
+#define ORB_SET_DIRECTION(value) ((value & 0x1) << 27)
struct sbp2_command_orb {
volatile u32 next_ORB_hi;
@@ -76,8 +78,8 @@
u32 login_response_lo;
u32 lun_misc;
u32 passwd_resp_lengths;
- u32 status_FIFO_hi;
- u32 status_FIFO_lo;
+ u32 status_fifo_hi;
+ u32 status_fifo_lo;
};
#define RESPONSE_GET_LOGIN_ID(value) (value & 0xffff)
@@ -102,8 +104,8 @@
u32 query_response_lo;
u32 lun_misc;
u32 reserved_resp_length;
- u32 status_FIFO_hi;
- u32 status_FIFO_lo;
+ u32 status_fifo_hi;
+ u32 status_fifo_lo;
};
#define RESPONSE_GET_MAX_LOGINS(value) (value & 0xffff)
@@ -123,8 +125,8 @@
u32 reserved4;
u32 login_ID_misc;
u32 reserved5;
- u32 status_FIFO_hi;
- u32 status_FIFO_lo;
+ u32 status_fifo_hi;
+ u32 status_fifo_lo;
};
struct sbp2_logout_orb {
@@ -134,8 +136,8 @@
u32 reserved4;
u32 login_ID_misc;
u32 reserved5;
- u32 status_FIFO_hi;
- u32 status_FIFO_lo;
+ u32 status_fifo_hi;
+ u32 status_fifo_lo;
};
#define PAGE_TABLE_SET_SEGMENT_BASE_HI(value) (value & 0xffff)
@@ -195,30 +197,6 @@
* Miscellaneous SBP2 related config rom defines
*/
-/* The status fifo address definition below is used as a base for each
- * node, which a chunk seperately assigned to each unit directory in the
- * node. For example, 0xfffe00000000ULL is used for the first sbp2 device
- * detected on node 0, 0xfffe00000020ULL for the next sbp2 device on node
- * 0, and so on.
- *
- * Note: We could use a single status fifo address for all sbp2 devices,
- * and figure out which sbp2 device the status belongs to by looking at
- * the source node id of the status write... but, using separate addresses
- * for each sbp2 unit directory allows for better code and the ability to
- * support multiple luns within a single 1394 node.
- *
- * Also note that we choose the address range below as it is a region
- * specified for write posting, where the ohci controller will
- * automatically send an ack_complete when the status is written by the
- * sbp2 device... saving a split transaction. =)
- */
-#define SBP2_STATUS_FIFO_ADDRESS 0xfffe00000000ULL
-#define SBP2_STATUS_FIFO_ADDRESS_HI 0xfffe
-#define SBP2_STATUS_FIFO_ADDRESS_LO 0x0
-
-#define SBP2_STATUS_FIFO_ENTRY_TO_OFFSET(entry) ((entry) << 5)
-#define SBP2_STATUS_FIFO_OFFSET_TO_ENTRY(offset) ((offset) >> 5)
-
#define SBP2_UNIT_DIRECTORY_OFFSET_KEY 0xd1
#define SBP2_CSR_OFFSET_KEY 0x54
#define SBP2_UNIT_SPEC_ID_KEY 0x12
@@ -258,7 +236,6 @@
*/
#define SBP2_MAX_SG_ELEMENT_LENGTH 0xf000
-#define SBP2_MAX_UDS_PER_NODE 16 /* Maximum scsi devices per node */
#define SBP2_MAX_SECTORS 255 /* Max sectors supported */
#define SBP2_MAX_CMDS 8 /* This should be safe */
@@ -338,6 +315,11 @@
u32 sbp2_firmware_revision;
/*
+ * Address for the device to write status blocks to
+ */
+ u64 status_fifo_addr;
+
+ /*
* Variable used for logins, reconnects, logouts, query logins
*/
atomic_t sbp2_login_complete;
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index e9adeb9..745ca1f 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -849,10 +849,16 @@
static void free_dev(struct mapped_device *md)
{
- free_minor(md->disk->first_minor);
+ unsigned int minor = md->disk->first_minor;
+
+ if (md->suspended_bdev) {
+ thaw_bdev(md->suspended_bdev, NULL);
+ bdput(md->suspended_bdev);
+ }
mempool_destroy(md->tio_pool);
mempool_destroy(md->io_pool);
del_gendisk(md->disk);
+ free_minor(minor);
put_disk(md->disk);
blk_put_queue(md->queue);
kfree(md);
diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c
index ded2c33..1c074d6 100644
--- a/drivers/mtd/chips/cfi_cmdset_0001.c
+++ b/drivers/mtd/chips/cfi_cmdset_0001.c
@@ -408,6 +408,7 @@
cfi->chips[i].buffer_write_time = 1<<cfi->cfiq->BufWriteTimeoutTyp;
cfi->chips[i].erase_time = 1<<cfi->cfiq->BlockEraseTimeoutTyp;
cfi->chips[i].ref_point_counter = 0;
+ init_waitqueue_head(&(cfi->chips[i].wq));
}
map->fldrv = &cfi_intelext_chipdrv;
diff --git a/drivers/net/ifb.c b/drivers/net/ifb.c
index 1b69925..31fb2d7 100644
--- a/drivers/net/ifb.c
+++ b/drivers/net/ifb.c
@@ -57,7 +57,7 @@
struct sk_buff_head tq;
};
-static int numifbs = 1;
+static int numifbs = 2;
static void ri_tasklet(unsigned long dev);
static int ifb_xmit(struct sk_buff *skb, struct net_device *dev);
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index 6e10184..8cc0d0b 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -287,6 +287,20 @@
TxInterFrameGapShift = 24,
TxDMAShift = 8, /* DMA burst value (0-7) is shift this many bits */
+ /* Config1 register p.24 */
+ PMEnable = (1 << 0), /* Power Management Enable */
+
+ /* Config3 register p.25 */
+ MagicPacket = (1 << 5), /* Wake up when receives a Magic Packet */
+ LinkUp = (1 << 4), /* Wake up when the cable connection is re-established */
+
+ /* Config5 register p.27 */
+ BWF = (1 << 6), /* Accept Broadcast wakeup frame */
+ MWF = (1 << 5), /* Accept Multicast wakeup frame */
+ UWF = (1 << 4), /* Accept Unicast wakeup frame */
+ LanWake = (1 << 1), /* LanWake enable/disable */
+ PMEStatus = (1 << 0), /* PME status can be reset by PCI RST# */
+
/* TBICSR p.28 */
TBIReset = 0x80000000,
TBILoopback = 0x40000000,
@@ -433,6 +447,7 @@
unsigned int (*phy_reset_pending)(void __iomem *);
unsigned int (*link_ok)(void __iomem *);
struct work_struct task;
+ unsigned wol_enabled : 1;
};
MODULE_AUTHOR("Realtek and the Linux r8169 crew <netdev@vger.kernel.org>");
@@ -607,6 +622,80 @@
*duplex = p->duplex;
}
+static void rtl8169_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ u8 options;
+
+ wol->wolopts = 0;
+
+#define WAKE_ANY (WAKE_PHY | WAKE_MAGIC | WAKE_UCAST | WAKE_BCAST | WAKE_MCAST)
+ wol->supported = WAKE_ANY;
+
+ spin_lock_irq(&tp->lock);
+
+ options = RTL_R8(Config1);
+ if (!(options & PMEnable))
+ goto out_unlock;
+
+ options = RTL_R8(Config3);
+ if (options & LinkUp)
+ wol->wolopts |= WAKE_PHY;
+ if (options & MagicPacket)
+ wol->wolopts |= WAKE_MAGIC;
+
+ options = RTL_R8(Config5);
+ if (options & UWF)
+ wol->wolopts |= WAKE_UCAST;
+ if (options & BWF)
+ wol->wolopts |= WAKE_BCAST;
+ if (options & MWF)
+ wol->wolopts |= WAKE_MCAST;
+
+out_unlock:
+ spin_unlock_irq(&tp->lock);
+}
+
+static int rtl8169_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ int i;
+ static struct {
+ u32 opt;
+ u16 reg;
+ u8 mask;
+ } cfg[] = {
+ { WAKE_ANY, Config1, PMEnable },
+ { WAKE_PHY, Config3, LinkUp },
+ { WAKE_MAGIC, Config3, MagicPacket },
+ { WAKE_UCAST, Config5, UWF },
+ { WAKE_BCAST, Config5, BWF },
+ { WAKE_MCAST, Config5, MWF },
+ { WAKE_ANY, Config5, LanWake }
+ };
+
+ spin_lock_irq(&tp->lock);
+
+ RTL_W8(Cfg9346, Cfg9346_Unlock);
+
+ for (i = 0; i < ARRAY_SIZE(cfg); i++) {
+ u8 options = RTL_R8(cfg[i].reg) & ~cfg[i].mask;
+ if (wol->wolopts & cfg[i].opt)
+ options |= cfg[i].mask;
+ RTL_W8(cfg[i].reg, options);
+ }
+
+ RTL_W8(Cfg9346, Cfg9346_Lock);
+
+ tp->wol_enabled = (wol->wolopts) ? 1 : 0;
+
+ spin_unlock_irq(&tp->lock);
+
+ return 0;
+}
+
static void rtl8169_get_drvinfo(struct net_device *dev,
struct ethtool_drvinfo *info)
{
@@ -1025,6 +1114,8 @@
.get_tso = ethtool_op_get_tso,
.set_tso = ethtool_op_set_tso,
.get_regs = rtl8169_get_regs,
+ .get_wol = rtl8169_get_wol,
+ .set_wol = rtl8169_set_wol,
.get_strings = rtl8169_get_strings,
.get_stats_count = rtl8169_get_stats_count,
.get_ethtool_stats = rtl8169_get_ethtool_stats,
@@ -1442,6 +1533,11 @@
}
tp->chipset = i;
+ RTL_W8(Cfg9346, Cfg9346_Unlock);
+ RTL_W8(Config1, RTL_R8(Config1) | PMEnable);
+ RTL_W8(Config5, RTL_R8(Config5) & PMEStatus);
+ RTL_W8(Cfg9346, Cfg9346_Lock);
+
*ioaddr_out = ioaddr;
*dev_out = dev;
out:
@@ -1612,49 +1708,6 @@
pci_set_drvdata(pdev, NULL);
}
-#ifdef CONFIG_PM
-
-static int rtl8169_suspend(struct pci_dev *pdev, pm_message_t state)
-{
- struct net_device *dev = pci_get_drvdata(pdev);
- struct rtl8169_private *tp = netdev_priv(dev);
- void __iomem *ioaddr = tp->mmio_addr;
- unsigned long flags;
-
- if (!netif_running(dev))
- return 0;
-
- netif_device_detach(dev);
- netif_stop_queue(dev);
- spin_lock_irqsave(&tp->lock, flags);
-
- /* Disable interrupts, stop Rx and Tx */
- RTL_W16(IntrMask, 0);
- RTL_W8(ChipCmd, 0);
-
- /* Update the error counts. */
- tp->stats.rx_missed_errors += RTL_R32(RxMissed);
- RTL_W32(RxMissed, 0);
- spin_unlock_irqrestore(&tp->lock, flags);
-
- return 0;
-}
-
-static int rtl8169_resume(struct pci_dev *pdev)
-{
- struct net_device *dev = pci_get_drvdata(pdev);
-
- if (!netif_running(dev))
- return 0;
-
- netif_device_attach(dev);
- rtl8169_hw_start(dev);
-
- return 0;
-}
-
-#endif /* CONFIG_PM */
-
static void rtl8169_set_rxbufsize(struct rtl8169_private *tp,
struct net_device *dev)
{
@@ -2700,6 +2753,56 @@
return &tp->stats;
}
+#ifdef CONFIG_PM
+
+static int rtl8169_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct rtl8169_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+
+ if (!netif_running(dev))
+ goto out;
+
+ netif_device_detach(dev);
+ netif_stop_queue(dev);
+
+ spin_lock_irq(&tp->lock);
+
+ rtl8169_asic_down(ioaddr);
+
+ tp->stats.rx_missed_errors += RTL_R32(RxMissed);
+ RTL_W32(RxMissed, 0);
+
+ spin_unlock_irq(&tp->lock);
+
+ pci_save_state(pdev);
+ pci_enable_wake(pdev, pci_choose_state(pdev, state), tp->wol_enabled);
+ pci_set_power_state(pdev, pci_choose_state(pdev, state));
+out:
+ return 0;
+}
+
+static int rtl8169_resume(struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+
+ if (!netif_running(dev))
+ goto out;
+
+ netif_device_attach(dev);
+
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+ pci_enable_wake(pdev, PCI_D0, 0);
+
+ rtl8169_schedule_work(dev, rtl8169_reset_task);
+out:
+ return 0;
+}
+
+#endif /* CONFIG_PM */
+
static struct pci_driver rtl8169_pci_driver = {
.name = MODULENAME,
.id_table = rtl8169_pci_tbl,
diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index 67fb19b..25e028b 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -879,13 +879,12 @@
int i;
xm_write16(hw, port, XM_PHY_ADDR, reg | hw->phy_addr);
- xm_read16(hw, port, XM_PHY_DATA);
+ *val = xm_read16(hw, port, XM_PHY_DATA);
- /* Need to wait for external PHY */
for (i = 0; i < PHY_RETRIES; i++) {
- udelay(1);
if (xm_read16(hw, port, XM_MMU_CMD) & XM_MMU_PHY_RDY)
goto ready;
+ udelay(1);
}
return -ETIMEDOUT;
@@ -918,7 +917,12 @@
ready:
xm_write16(hw, port, XM_PHY_DATA, val);
- return 0;
+ for (i = 0; i < PHY_RETRIES; i++) {
+ if (!(xm_read16(hw, port, XM_MMU_CMD) & XM_MMU_PHY_BUSY))
+ return 0;
+ udelay(1);
+ }
+ return -ETIMEDOUT;
}
static void genesis_init(struct skge_hw *hw)
@@ -1168,13 +1172,17 @@
u32 r;
const u8 zero[6] = { 0 };
- /* Clear MIB counters */
- xm_write16(hw, port, XM_STAT_CMD,
- XM_SC_CLR_RXC | XM_SC_CLR_TXC);
- /* Clear two times according to Errata #3 */
- xm_write16(hw, port, XM_STAT_CMD,
- XM_SC_CLR_RXC | XM_SC_CLR_TXC);
+ for (i = 0; i < 10; i++) {
+ skge_write16(hw, SK_REG(port, TX_MFF_CTRL1),
+ MFF_SET_MAC_RST);
+ if (skge_read16(hw, SK_REG(port, TX_MFF_CTRL1)) & MFF_SET_MAC_RST)
+ goto reset_ok;
+ udelay(1);
+ }
+ printk(KERN_WARNING PFX "%s: genesis reset failed\n", dev->name);
+
+ reset_ok:
/* Unreset the XMAC. */
skge_write16(hw, SK_REG(port, TX_MFF_CTRL1), MFF_CLR_MAC_RST);
@@ -1191,7 +1199,7 @@
r |= GP_DIR_2|GP_IO_2;
skge_write32(hw, B2_GP_IO, r);
- skge_read32(hw, B2_GP_IO);
+
/* Enable GMII interface */
xm_write16(hw, port, XM_HW_CFG, XM_HW_GMII_MD);
@@ -1205,6 +1213,13 @@
for (i = 1; i < 16; i++)
xm_outaddr(hw, port, XM_EXM(i), zero);
+ /* Clear MIB counters */
+ xm_write16(hw, port, XM_STAT_CMD,
+ XM_SC_CLR_RXC | XM_SC_CLR_TXC);
+ /* Clear two times according to Errata #3 */
+ xm_write16(hw, port, XM_STAT_CMD,
+ XM_SC_CLR_RXC | XM_SC_CLR_TXC);
+
/* configure Rx High Water Mark (XM_RX_HI_WM) */
xm_write16(hw, port, XM_RX_HI_WM, 1450);
@@ -2170,8 +2185,10 @@
skge->tx_avail = skge->tx_ring.count - 1;
/* Enable IRQ from port */
+ spin_lock_irq(&hw->hw_lock);
hw->intr_mask |= portirqmask[port];
skge_write32(hw, B0_IMSK, hw->intr_mask);
+ spin_unlock_irq(&hw->hw_lock);
/* Initialize MAC */
spin_lock_bh(&hw->phy_lock);
@@ -2229,8 +2246,10 @@
else
yukon_stop(skge);
+ spin_lock_irq(&hw->hw_lock);
hw->intr_mask &= ~portirqmask[skge->port];
skge_write32(hw, B0_IMSK, hw->intr_mask);
+ spin_unlock_irq(&hw->hw_lock);
/* Stop transmitter */
skge_write8(hw, Q_ADDR(txqaddr[port], Q_CSR), CSR_STOP);
@@ -2678,8 +2697,7 @@
/* restart receiver */
wmb();
- skge_write8(hw, Q_ADDR(rxqaddr[skge->port], Q_CSR),
- CSR_START | CSR_IRQ_CL_F);
+ skge_write8(hw, Q_ADDR(rxqaddr[skge->port], Q_CSR), CSR_START);
*budget -= work_done;
dev->quota -= work_done;
@@ -2687,10 +2705,11 @@
if (work_done >= to_do)
return 1; /* not done */
- netif_rx_complete(dev);
- hw->intr_mask |= portirqmask[skge->port];
- skge_write32(hw, B0_IMSK, hw->intr_mask);
- skge_read32(hw, B0_IMSK);
+ spin_lock_irq(&hw->hw_lock);
+ __netif_rx_complete(dev);
+ hw->intr_mask |= portirqmask[skge->port];
+ skge_write32(hw, B0_IMSK, hw->intr_mask);
+ spin_unlock_irq(&hw->hw_lock);
return 0;
}
@@ -2850,18 +2869,10 @@
}
spin_unlock(&hw->phy_lock);
- local_irq_disable();
+ spin_lock_irq(&hw->hw_lock);
hw->intr_mask |= IS_EXT_REG;
skge_write32(hw, B0_IMSK, hw->intr_mask);
- local_irq_enable();
-}
-
-static inline void skge_wakeup(struct net_device *dev)
-{
- struct skge_port *skge = netdev_priv(dev);
-
- prefetch(skge->rx_ring.to_clean);
- netif_rx_schedule(dev);
+ spin_unlock_irq(&hw->hw_lock);
}
static irqreturn_t skge_intr(int irq, void *dev_id, struct pt_regs *regs)
@@ -2872,15 +2883,17 @@
if (status == 0 || status == ~0) /* hotplug or shared irq */
return IRQ_NONE;
- status &= hw->intr_mask;
+ spin_lock(&hw->hw_lock);
if (status & IS_R1_F) {
+ skge_write8(hw, Q_ADDR(Q_R1, Q_CSR), CSR_IRQ_CL_F);
hw->intr_mask &= ~IS_R1_F;
- skge_wakeup(hw->dev[0]);
+ netif_rx_schedule(hw->dev[0]);
}
if (status & IS_R2_F) {
+ skge_write8(hw, Q_ADDR(Q_R2, Q_CSR), CSR_IRQ_CL_F);
hw->intr_mask &= ~IS_R2_F;
- skge_wakeup(hw->dev[1]);
+ netif_rx_schedule(hw->dev[1]);
}
if (status & IS_XA1_F)
@@ -2922,6 +2935,7 @@
}
skge_write32(hw, B0_IMSK, hw->intr_mask);
+ spin_unlock(&hw->hw_lock);
return IRQ_HANDLED;
}
@@ -3290,6 +3304,7 @@
hw->pdev = pdev;
spin_lock_init(&hw->phy_lock);
+ spin_lock_init(&hw->hw_lock);
tasklet_init(&hw->ext_tasklet, skge_extirq, (unsigned long) hw);
hw->regs = ioremap_nocache(pci_resource_start(pdev, 0), 0x4000);
diff --git a/drivers/net/skge.h b/drivers/net/skge.h
index 2efdacc..941f12a 100644
--- a/drivers/net/skge.h
+++ b/drivers/net/skge.h
@@ -2402,6 +2402,7 @@
struct tasklet_struct ext_tasklet;
spinlock_t phy_lock;
+ spinlock_t hw_lock;
};
enum {
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index bfeba5b..ca8160d 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -195,11 +195,11 @@
pr_debug("sky2_set_power_state %d\n", state);
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
- pci_read_config_word(hw->pdev, hw->pm_cap + PCI_PM_PMC, &power_control);
+ power_control = sky2_pci_read16(hw, hw->pm_cap + PCI_PM_PMC);
vaux = (sky2_read16(hw, B0_CTST) & Y2_VAUX_AVAIL) &&
(power_control & PCI_PM_CAP_PME_D3cold);
- pci_read_config_word(hw->pdev, hw->pm_cap + PCI_PM_CTRL, &power_control);
+ power_control = sky2_pci_read16(hw, hw->pm_cap + PCI_PM_CTRL);
power_control |= PCI_PM_CTRL_PME_STATUS;
power_control &= ~(PCI_PM_CTRL_STATE_MASK);
@@ -223,7 +223,7 @@
sky2_write8(hw, B2_Y2_CLK_GATE, 0);
/* Turn off phy power saving */
- pci_read_config_dword(hw->pdev, PCI_DEV_REG1, ®1);
+ reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
reg1 &= ~(PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD);
/* looks like this XL is back asswards .. */
@@ -232,18 +232,28 @@
if (hw->ports > 1)
reg1 |= PCI_Y2_PHY2_COMA;
}
- pci_write_config_dword(hw->pdev, PCI_DEV_REG1, reg1);
+
+ if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
+ sky2_pci_write32(hw, PCI_DEV_REG3, 0);
+ reg1 = sky2_pci_read32(hw, PCI_DEV_REG4);
+ reg1 &= P_ASPM_CONTROL_MSK;
+ sky2_pci_write32(hw, PCI_DEV_REG4, reg1);
+ sky2_pci_write32(hw, PCI_DEV_REG5, 0);
+ }
+
+ sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
+
break;
case PCI_D3hot:
case PCI_D3cold:
/* Turn on phy power saving */
- pci_read_config_dword(hw->pdev, PCI_DEV_REG1, ®1);
+ reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
reg1 &= ~(PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD);
else
reg1 |= (PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD);
- pci_write_config_dword(hw->pdev, PCI_DEV_REG1, reg1);
+ sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
sky2_write8(hw, B2_Y2_CLK_GATE, 0);
@@ -265,7 +275,7 @@
ret = -1;
}
- pci_write_config_byte(hw->pdev, hw->pm_cap + PCI_PM_CTRL, power_control);
+ sky2_pci_write16(hw, hw->pm_cap + PCI_PM_CTRL, power_control);
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
return ret;
}
@@ -463,16 +473,31 @@
ledover |= PHY_M_LED_MO_RX(MO_LED_OFF);
}
- gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);
+ if (hw->chip_id == CHIP_ID_YUKON_EC_U && hw->chip_rev >= 2) {
+ /* apply fixes in PHY AFE */
+ gm_phy_write(hw, port, 22, 255);
+ /* increase differential signal amplitude in 10BASE-T */
+ gm_phy_write(hw, port, 24, 0xaa99);
+ gm_phy_write(hw, port, 23, 0x2011);
- if (sky2->autoneg == AUTONEG_DISABLE || sky2->speed == SPEED_100) {
- /* turn on 100 Mbps LED (LED_LINK100) */
- ledover |= PHY_M_LED_MO_100(MO_LED_ON);
+ /* fix for IEEE A/B Symmetry failure in 1000BASE-T */
+ gm_phy_write(hw, port, 24, 0xa204);
+ gm_phy_write(hw, port, 23, 0x2002);
+
+ /* set page register to 0 */
+ gm_phy_write(hw, port, 22, 0);
+ } else {
+ gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);
+
+ if (sky2->autoneg == AUTONEG_DISABLE || sky2->speed == SPEED_100) {
+ /* turn on 100 Mbps LED (LED_LINK100) */
+ ledover |= PHY_M_LED_MO_100(MO_LED_ON);
+ }
+
+ if (ledover)
+ gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover);
+
}
-
- if (ledover)
- gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover);
-
/* Enable phy interrupt on auto-negotiation complete (or link up) */
if (sky2->autoneg == AUTONEG_ENABLE)
gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_IS_AN_COMPL);
@@ -953,6 +978,12 @@
sky2->rx_put = sky2->rx_next = 0;
sky2_qset(hw, rxq);
+
+ if (hw->chip_id == CHIP_ID_YUKON_EC_U && hw->chip_rev >= 2) {
+ /* MAC Rx RAM Read is controlled by hardware */
+ sky2_write32(hw, Q_ADDR(rxq, Q_F), F_M_RX_RAM_DIS);
+ }
+
sky2_prefetch_init(hw, rxq, sky2->rx_le_map, RX_LE_SIZE - 1);
rx_set_checksum(sky2);
@@ -1035,9 +1066,10 @@
RB_RST_SET);
sky2_qset(hw, txqaddr[port]);
- if (hw->chip_id == CHIP_ID_YUKON_EC_U)
- sky2_write16(hw, Q_ADDR(txqaddr[port], Q_AL), 0x1a0);
+ /* Set almost empty threshold */
+ if (hw->chip_id == CHIP_ID_YUKON_EC_U && hw->chip_rev == 1)
+ sky2_write16(hw, Q_ADDR(txqaddr[port], Q_AL), 0x1a0);
sky2_prefetch_init(hw, txqaddr[port], sky2->tx_le_map,
TX_RING_SIZE - 1);
@@ -1047,8 +1079,10 @@
goto err_out;
/* Enable interrupts from phy/mac for port */
+ spin_lock_irq(&hw->hw_lock);
hw->intr_mask |= (port == 0) ? Y2_IS_PORT_1 : Y2_IS_PORT_2;
sky2_write32(hw, B0_IMSK, hw->intr_mask);
+ spin_unlock_irq(&hw->hw_lock);
return 0;
err_out:
@@ -1348,10 +1382,10 @@
netif_stop_queue(dev);
/* Disable port IRQ */
- local_irq_disable();
+ spin_lock_irq(&hw->hw_lock);
hw->intr_mask &= ~((sky2->port == 0) ? Y2_IS_IRQ_PHY1 : Y2_IS_IRQ_PHY2);
sky2_write32(hw, B0_IMSK, hw->intr_mask);
- local_irq_enable();
+ spin_unlock_irq(&hw->hw_lock);
flush_scheduled_work();
@@ -1633,10 +1667,10 @@
out:
up(&sky2->phy_sema);
- local_irq_disable();
+ spin_lock_irq(&hw->hw_lock);
hw->intr_mask |= (sky2->port == 0) ? Y2_IS_IRQ_PHY1 : Y2_IS_IRQ_PHY2;
sky2_write32(hw, B0_IMSK, hw->intr_mask);
- local_irq_enable();
+ spin_unlock_irq(&hw->hw_lock);
}
@@ -1863,6 +1897,17 @@
sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ);
+ /*
+ * Kick the STAT_LEV_TIMER_CTRL timer.
+ * This fixes my hangs on Yukon-EC (0xb6) rev 1.
+ * The if clause is there to start the timer only if it has been
+ * configured correctly and not been disabled via ethtool.
+ */
+ if (sky2_read8(hw, STAT_LEV_TIMER_CTRL) == TIM_START) {
+ sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_STOP);
+ sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_START);
+ }
+
hwidx = sky2_read16(hw, STAT_PUT_IDX);
BUG_ON(hwidx >= STATUS_RING_SIZE);
rmb();
@@ -1945,16 +1990,19 @@
sky2_tx_check(hw, 0, tx_done[0]);
sky2_tx_check(hw, 1, tx_done[1]);
- if (likely(work_done < to_do)) {
- /* need to restart TX timer */
- if (is_ec_a1(hw)) {
- sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_STOP);
- sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START);
- }
+ if (sky2_read8(hw, STAT_TX_TIMER_CTRL) == TIM_START) {
+ sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_STOP);
+ sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START);
+ }
- netif_rx_complete(dev0);
+ if (likely(work_done < to_do)) {
+ spin_lock_irq(&hw->hw_lock);
+ __netif_rx_complete(dev0);
+
hw->intr_mask |= Y2_IS_STAT_BMU;
sky2_write32(hw, B0_IMSK, hw->intr_mask);
+ spin_unlock_irq(&hw->hw_lock);
+
return 0;
} else {
*budget -= work_done;
@@ -2017,13 +2065,13 @@
if (status & (Y2_IS_MST_ERR | Y2_IS_IRQ_STAT)) {
u16 pci_err;
- pci_read_config_word(hw->pdev, PCI_STATUS, &pci_err);
+ pci_err = sky2_pci_read16(hw, PCI_STATUS);
if (net_ratelimit())
printk(KERN_ERR PFX "%s: pci hw error (0x%x)\n",
pci_name(hw->pdev), pci_err);
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
- pci_write_config_word(hw->pdev, PCI_STATUS,
+ sky2_pci_write16(hw, PCI_STATUS,
pci_err | PCI_STATUS_ERROR_BITS);
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
}
@@ -2032,7 +2080,7 @@
/* PCI-Express uncorrectable Error occurred */
u32 pex_err;
- pci_read_config_dword(hw->pdev, PEX_UNC_ERR_STAT, &pex_err);
+ pex_err = sky2_pci_read32(hw, PEX_UNC_ERR_STAT);
if (net_ratelimit())
printk(KERN_ERR PFX "%s: pci express error (0x%x)\n",
@@ -2040,7 +2088,7 @@
/* clear the interrupt */
sky2_write32(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
- pci_write_config_dword(hw->pdev, PEX_UNC_ERR_STAT,
+ sky2_pci_write32(hw, PEX_UNC_ERR_STAT,
0xffffffffUL);
sky2_write32(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
@@ -2086,6 +2134,7 @@
hw->intr_mask &= ~(port == 0 ? Y2_IS_IRQ_PHY1 : Y2_IS_IRQ_PHY2);
sky2_write32(hw, B0_IMSK, hw->intr_mask);
+
schedule_work(&sky2->phy_task);
}
@@ -2099,6 +2148,7 @@
if (status == 0 || status == ~0)
return IRQ_NONE;
+ spin_lock(&hw->hw_lock);
if (status & Y2_IS_HW_ERR)
sky2_hw_intr(hw);
@@ -2127,7 +2177,7 @@
sky2_write32(hw, B0_Y2_SP_ICR, 2);
- sky2_read32(hw, B0_IMSK);
+ spin_unlock(&hw->hw_lock);
return IRQ_HANDLED;
}
@@ -2170,7 +2220,7 @@
{
u16 status;
u8 t8, pmd_type;
- int i, err;
+ int i;
sky2_write8(hw, B0_CTST, CS_RST_CLR);
@@ -2192,25 +2242,18 @@
sky2_write8(hw, B0_CTST, CS_RST_CLR);
/* clear PCI errors, if any */
- err = pci_read_config_word(hw->pdev, PCI_STATUS, &status);
- if (err)
- goto pci_err;
+ status = sky2_pci_read16(hw, PCI_STATUS);
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
- err = pci_write_config_word(hw->pdev, PCI_STATUS,
- status | PCI_STATUS_ERROR_BITS);
- if (err)
- goto pci_err;
+ sky2_pci_write16(hw, PCI_STATUS, status | PCI_STATUS_ERROR_BITS);
+
sky2_write8(hw, B0_CTST, CS_MRST_CLR);
/* clear any PEX errors */
- if (pci_find_capability(hw->pdev, PCI_CAP_ID_EXP)) {
- err = pci_write_config_dword(hw->pdev, PEX_UNC_ERR_STAT,
- 0xffffffffUL);
- if (err)
- goto pci_err;
- }
+ if (pci_find_capability(hw->pdev, PCI_CAP_ID_EXP))
+ sky2_pci_write32(hw, PEX_UNC_ERR_STAT, 0xffffffffUL);
+
pmd_type = sky2_read8(hw, B2_PMD_TYP);
hw->copper = !(pmd_type == 'L' || pmd_type == 'S');
@@ -2309,8 +2352,7 @@
sky2_write8(hw, STAT_FIFO_ISR_WM, 16);
sky2_write32(hw, STAT_TX_TIMER_INI, sky2_us2clk(hw, 1000));
- sky2_write32(hw, STAT_LEV_TIMER_INI, sky2_us2clk(hw, 100));
- sky2_write32(hw, STAT_ISR_TIMER_INI, sky2_us2clk(hw, 20));
+ sky2_write32(hw, STAT_ISR_TIMER_INI, sky2_us2clk(hw, 7));
}
/* enable status unit */
@@ -2321,14 +2363,6 @@
sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_START);
return 0;
-
-pci_err:
- /* This is to catch a BIOS bug workaround where
- * mmconfig table doesn't have other buses.
- */
- printk(KERN_ERR PFX "%s: can't access PCI config space\n",
- pci_name(hw->pdev));
- return err;
}
static u32 sky2_supported_modes(const struct sky2_hw *hw)
@@ -2852,11 +2886,11 @@
(ecmd->rx_coalesce_usecs_irq < tmin || ecmd->rx_coalesce_usecs_irq > tmax))
return -EINVAL;
- if (ecmd->tx_max_coalesced_frames > 0xffff)
+ if (ecmd->tx_max_coalesced_frames >= TX_RING_SIZE-1)
return -EINVAL;
- if (ecmd->rx_max_coalesced_frames > 0xff)
+ if (ecmd->rx_max_coalesced_frames > RX_MAX_PENDING)
return -EINVAL;
- if (ecmd->rx_max_coalesced_frames_irq > 0xff)
+ if (ecmd->rx_max_coalesced_frames_irq >RX_MAX_PENDING)
return -EINVAL;
if (ecmd->tx_coalesce_usecs == 0)
@@ -3198,17 +3232,6 @@
}
}
-#ifdef __BIG_ENDIAN
- /* byte swap descriptors in hardware */
- {
- u32 reg;
-
- pci_read_config_dword(pdev, PCI_DEV_REG2, ®);
- reg |= PCI_REV_DESC;
- pci_write_config_dword(pdev, PCI_DEV_REG2, reg);
- }
-#endif
-
err = -ENOMEM;
hw = kzalloc(sizeof(*hw), GFP_KERNEL);
if (!hw) {
@@ -3226,6 +3249,18 @@
goto err_out_free_hw;
}
hw->pm_cap = pm_cap;
+ spin_lock_init(&hw->hw_lock);
+
+#ifdef __BIG_ENDIAN
+ /* byte swap descriptors in hardware */
+ {
+ u32 reg;
+
+ reg = sky2_pci_read32(hw, PCI_DEV_REG2);
+ reg |= PCI_REV_DESC;
+ sky2_pci_write32(hw, PCI_DEV_REG2, reg);
+ }
+#endif
/* ring for status responses */
hw->st_le = pci_alloc_consistent(hw->pdev, STATUS_LE_BYTES,
diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index fd12c28..3edb980 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -5,14 +5,22 @@
#define _SKY2_H
/* PCI config registers */
-#define PCI_DEV_REG1 0x40
-#define PCI_DEV_REG2 0x44
-#define PCI_DEV_STATUS 0x7c
-#define PCI_OS_PCI_X (1<<26)
+enum {
+ PCI_DEV_REG1 = 0x40,
+ PCI_DEV_REG2 = 0x44,
+ PCI_DEV_STATUS = 0x7c,
+ PCI_DEV_REG3 = 0x80,
+ PCI_DEV_REG4 = 0x84,
+ PCI_DEV_REG5 = 0x88,
+};
-#define PEX_LNK_STAT 0xf2
-#define PEX_UNC_ERR_STAT 0x104
-#define PEX_DEV_CTRL 0xe8
+enum {
+ PEX_DEV_CAP = 0xe4,
+ PEX_DEV_CTRL = 0xe8,
+ PEX_DEV_STA = 0xea,
+ PEX_LNK_STAT = 0xf2,
+ PEX_UNC_ERR_STAT= 0x104,
+};
/* Yukon-2 */
enum pci_dev_reg_1 {
@@ -37,6 +45,25 @@
PCI_USEDATA64 = 1<<0, /* Use 64Bit Data bus ext */
};
+/* PCI_OUR_REG_4 32 bit Our Register 4 (Yukon-ECU only) */
+enum pci_dev_reg_4 {
+ /* (Link Training & Status State Machine) */
+ P_TIMER_VALUE_MSK = 0xffL<<16, /* Bit 23..16: Timer Value Mask */
+ /* (Active State Power Management) */
+ P_FORCE_ASPM_REQUEST = 1<<15, /* Force ASPM Request (A1 only) */
+ P_ASPM_GPHY_LINK_DOWN = 1<<14, /* GPHY Link Down (A1 only) */
+ P_ASPM_INT_FIFO_EMPTY = 1<<13, /* Internal FIFO Empty (A1 only) */
+ P_ASPM_CLKRUN_REQUEST = 1<<12, /* CLKRUN Request (A1 only) */
+
+ P_ASPM_FORCE_CLKREQ_ENA = 1<<4, /* Force CLKREQ Enable (A1b only) */
+ P_ASPM_CLKREQ_PAD_CTL = 1<<3, /* CLKREQ PAD Control (A1 only) */
+ P_ASPM_A1_MODE_SELECT = 1<<2, /* A1 Mode Select (A1 only) */
+ P_CLK_GATE_PEX_UNIT_ENA = 1<<1, /* Enable Gate PEX Unit Clock */
+ P_CLK_GATE_ROOT_COR_ENA = 1<<0, /* Enable Gate Root Core Clock */
+ P_ASPM_CONTROL_MSK = P_FORCE_ASPM_REQUEST | P_ASPM_GPHY_LINK_DOWN
+ | P_ASPM_CLKRUN_REQUEST | P_ASPM_INT_FIFO_EMPTY,
+};
+
#define PCI_STATUS_ERROR_BITS (PCI_STATUS_DETECTED_PARITY | \
PCI_STATUS_SIG_SYSTEM_ERROR | \
@@ -507,6 +534,16 @@
};
#define Q_ADDR(reg, offs) (B8_Q_REGS + (reg) + (offs))
+/* Q_F 32 bit Flag Register */
+enum {
+ F_ALM_FULL = 1<<27, /* Rx FIFO: almost full */
+ F_EMPTY = 1<<27, /* Tx FIFO: empty flag */
+ F_FIFO_EOF = 1<<26, /* Tag (EOF Flag) bit in FIFO */
+ F_WM_REACHED = 1<<25, /* Watermark reached */
+ F_M_RX_RAM_DIS = 1<<24, /* MAC Rx RAM Read Port disable */
+ F_FIFO_LEVEL = 0x1fL<<16, /* Bit 23..16: # of Qwords in FIFO */
+ F_WATER_MARK = 0x0007ffL, /* Bit 10.. 0: Watermark */
+};
/* Queue Prefetch Unit Offsets, use Y2_QADDR() to address (Yukon-2 only)*/
enum {
@@ -909,10 +946,12 @@
PHY_BCOM_ID1_C0 = 0x6044,
PHY_BCOM_ID1_C5 = 0x6047,
- PHY_MARV_ID1_B0 = 0x0C23, /* Yukon (PHY 88E1011) */
+ PHY_MARV_ID1_B0 = 0x0C23, /* Yukon (PHY 88E1011) */
PHY_MARV_ID1_B2 = 0x0C25, /* Yukon-Plus (PHY 88E1011) */
- PHY_MARV_ID1_C2 = 0x0CC2, /* Yukon-EC (PHY 88E1111) */
- PHY_MARV_ID1_Y2 = 0x0C91, /* Yukon-2 (PHY 88E1112) */
+ PHY_MARV_ID1_C2 = 0x0CC2, /* Yukon-EC (PHY 88E1111) */
+ PHY_MARV_ID1_Y2 = 0x0C91, /* Yukon-2 (PHY 88E1112) */
+ PHY_MARV_ID1_FE = 0x0C83, /* Yukon-FE (PHY 88E3082 Rev.A1) */
+ PHY_MARV_ID1_ECU= 0x0CB0, /* Yukon-ECU (PHY 88E1149 Rev.B2?) */
};
/* Advertisement register bits */
@@ -1837,8 +1876,9 @@
struct sky2_hw {
void __iomem *regs;
struct pci_dev *pdev;
- u32 intr_mask;
struct net_device *dev[2];
+ spinlock_t hw_lock;
+ u32 intr_mask;
int pm_cap;
int msi;
@@ -1912,4 +1952,25 @@
gma_write16(hw, port, reg+4,(u16) addr[2] | ((u16) addr[3] << 8));
gma_write16(hw, port, reg+8,(u16) addr[4] | ((u16) addr[5] << 8));
}
+
+/* PCI config space access */
+static inline u32 sky2_pci_read32(const struct sky2_hw *hw, unsigned reg)
+{
+ return sky2_read32(hw, Y2_CFG_SPC + reg);
+}
+
+static inline u16 sky2_pci_read16(const struct sky2_hw *hw, unsigned reg)
+{
+ return sky2_read16(hw, Y2_CFG_SPC + reg);
+}
+
+static inline void sky2_pci_write32(struct sky2_hw *hw, unsigned reg, u32 val)
+{
+ sky2_write32(hw, Y2_CFG_SPC + reg, val);
+}
+
+static inline void sky2_pci_write16(struct sky2_hw *hw, unsigned reg, u16 val)
+{
+ sky2_write16(hw, Y2_CFG_SPC + reg, val);
+}
#endif
diff --git a/drivers/net/tlan.c b/drivers/net/tlan.c
index c2506b5..12076f8 100644
--- a/drivers/net/tlan.c
+++ b/drivers/net/tlan.c
@@ -536,6 +536,7 @@
u16 device_id;
int reg, rc = -ENODEV;
+#ifdef CONFIG_PCI
if (pdev) {
rc = pci_enable_device(pdev);
if (rc)
@@ -547,6 +548,7 @@
goto err_out;
}
}
+#endif /* CONFIG_PCI */
dev = alloc_etherdev(sizeof(TLanPrivateInfo));
if (dev == NULL) {
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 930db39..9d98723 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -89,6 +89,11 @@
#define SD_MAX_RETRIES 5
#define SD_PASSTHROUGH_RETRIES 1
+/*
+ * Size of the initial data buffer for mode and read capacity data
+ */
+#define SD_BUF_SIZE 512
+
static void scsi_disk_release(struct kref *kref);
struct scsi_disk {
@@ -1239,7 +1244,7 @@
/*
* read write protect setting, if possible - called only in sd_revalidate_disk()
- * called with buffer of length 512
+ * called with buffer of length SD_BUF_SIZE
*/
static void
sd_read_write_protect_flag(struct scsi_disk *sdkp, char *diskname,
@@ -1297,7 +1302,7 @@
/*
* sd_read_cache_type - called only from sd_revalidate_disk()
- * called with buffer of length 512
+ * called with buffer of length SD_BUF_SIZE
*/
static void
sd_read_cache_type(struct scsi_disk *sdkp, char *diskname,
@@ -1342,6 +1347,8 @@
/* Take headers and block descriptors into account */
len += data.header_length + data.block_descriptor_length;
+ if (len > SD_BUF_SIZE)
+ goto bad_sense;
/* Get the data */
res = sd_do_mode_sense(sdp, dbd, modepage, buffer, len, &data, &sshdr);
@@ -1354,6 +1361,12 @@
int ct = 0;
int offset = data.header_length + data.block_descriptor_length;
+ if (offset >= SD_BUF_SIZE - 2) {
+ printk(KERN_ERR "%s: malformed MODE SENSE response",
+ diskname);
+ goto defaults;
+ }
+
if ((buffer[offset] & 0x3f) != modepage) {
printk(KERN_ERR "%s: got wrong page\n", diskname);
goto defaults;
@@ -1398,6 +1411,7 @@
diskname);
sdkp->WCE = 0;
sdkp->RCD = 0;
+ sdkp->DPOFUA = 0;
}
/**
@@ -1421,7 +1435,7 @@
if (!scsi_device_online(sdp))
goto out;
- buffer = kmalloc(512, GFP_KERNEL | __GFP_DMA);
+ buffer = kmalloc(SD_BUF_SIZE, GFP_KERNEL | __GFP_DMA);
if (!buffer) {
printk(KERN_WARNING "(sd_revalidate_disk:) Memory allocation "
"failure.\n");
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 244e8ff..7aca22c 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -2326,6 +2326,12 @@
.cons = SERIAL8250_CONSOLE,
};
+/*
+ * early_serial_setup - early registration for 8250 ports
+ *
+ * Setup an 8250 port structure prior to console initialisation. Use
+ * after console initialisation will cause undefined behaviour.
+ */
int __init early_serial_setup(struct uart_port *port)
{
if (port->line >= ARRAY_SIZE(serial8250_ports))
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index e64ed16..f5079c7 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -520,7 +520,7 @@
config FB_GBE_MEM
int "Video memory size in MB"
depends on FB_GBE
- default 8
+ default 4
help
This is the amount of memory reserved for the framebuffer,
which can be any value between 1MB and 8MB.
diff --git a/drivers/video/asiliantfb.c b/drivers/video/asiliantfb.c
index 69f7554..c924d81 100644
--- a/drivers/video/asiliantfb.c
+++ b/drivers/video/asiliantfb.c
@@ -322,32 +322,29 @@
writeb(green, mmio_base + 0x791);
writeb(blue, mmio_base + 0x791);
- switch(p->var.bits_per_pixel) {
- case 15:
- if (regno < 16) {
+ if (regno < 16) {
+ switch(p->var.red.offset) {
+ case 10: /* RGB 555 */
((u32 *)(p->pseudo_palette))[regno] =
((red & 0xf8) << 7) |
((green & 0xf8) << 2) |
((blue & 0xf8) >> 3);
- }
- break;
- case 16:
- if (regno < 16) {
+ break;
+ case 11: /* RGB 565 */
((u32 *)(p->pseudo_palette))[regno] =
((red & 0xf8) << 8) |
((green & 0xfc) << 3) |
((blue & 0xf8) >> 3);
- }
- break;
- case 24:
- if (regno < 24) {
+ break;
+ case 16: /* RGB 888 */
((u32 *)(p->pseudo_palette))[regno] =
(red << 16) |
(green << 8) |
(blue);
+ break;
}
- break;
}
+
return 0;
}
diff --git a/drivers/video/au1100fb.c b/drivers/video/au1100fb.c
index 2406899..3d04b2d 100644
--- a/drivers/video/au1100fb.c
+++ b/drivers/video/au1100fb.c
@@ -49,6 +49,7 @@
#include <linux/interrupt.h>
#include <linux/ctype.h>
#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
#include <asm/mach-au1x00/au1000.h>
@@ -406,7 +407,7 @@
vma->vm_flags |= VM_IO;
- if (io_remap_page_range(vma, vma->vm_start, off,
+ if (io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT,
vma->vm_end - vma->vm_start,
vma->vm_page_prot)) {
return -EAGAIN;
diff --git a/drivers/video/console/vgacon.c b/drivers/video/console/vgacon.c
index 12d9329..5a86978 100644
--- a/drivers/video/console/vgacon.c
+++ b/drivers/video/console/vgacon.c
@@ -509,57 +509,60 @@
{
unsigned long flags;
unsigned int scanlines = height * c->vc_font.height;
- u8 scanlines_lo, r7, vsync_end, mode, max_scan;
+ u8 scanlines_lo = 0, r7 = 0, vsync_end = 0, mode, max_scan;
spin_lock_irqsave(&vga_lock, flags);
- outb_p(VGA_CRTC_MAX_SCAN, vga_video_port_reg);
- max_scan = inb_p(vga_video_port_val);
-
- if (max_scan & 0x80)
- scanlines <<= 1;
-
vgacon_xres = width * VGA_FONTWIDTH;
vgacon_yres = height * c->vc_font.height;
- outb_p(VGA_CRTC_MODE, vga_video_port_reg);
- mode = inb_p(vga_video_port_val);
+ if (vga_video_type >= VIDEO_TYPE_VGAC) {
+ outb_p(VGA_CRTC_MAX_SCAN, vga_video_port_reg);
+ max_scan = inb_p(vga_video_port_val);
- if (mode & 0x04)
- scanlines >>= 1;
+ if (max_scan & 0x80)
+ scanlines <<= 1;
- scanlines -= 1;
- scanlines_lo = scanlines & 0xff;
+ outb_p(VGA_CRTC_MODE, vga_video_port_reg);
+ mode = inb_p(vga_video_port_val);
- outb_p(VGA_CRTC_OVERFLOW, vga_video_port_reg);
- r7 = inb_p(vga_video_port_val) & ~0x42;
+ if (mode & 0x04)
+ scanlines >>= 1;
- if (scanlines & 0x100)
- r7 |= 0x02;
- if (scanlines & 0x200)
- r7 |= 0x40;
+ scanlines -= 1;
+ scanlines_lo = scanlines & 0xff;
- /* deprotect registers */
- outb_p(VGA_CRTC_V_SYNC_END, vga_video_port_reg);
- vsync_end = inb_p(vga_video_port_val);
- outb_p(VGA_CRTC_V_SYNC_END, vga_video_port_reg);
- outb_p(vsync_end & ~0x80, vga_video_port_val);
+ outb_p(VGA_CRTC_OVERFLOW, vga_video_port_reg);
+ r7 = inb_p(vga_video_port_val) & ~0x42;
+
+ if (scanlines & 0x100)
+ r7 |= 0x02;
+ if (scanlines & 0x200)
+ r7 |= 0x40;
+
+ /* deprotect registers */
+ outb_p(VGA_CRTC_V_SYNC_END, vga_video_port_reg);
+ vsync_end = inb_p(vga_video_port_val);
+ outb_p(VGA_CRTC_V_SYNC_END, vga_video_port_reg);
+ outb_p(vsync_end & ~0x80, vga_video_port_val);
+ }
outb_p(VGA_CRTC_H_DISP, vga_video_port_reg);
outb_p(width - 1, vga_video_port_val);
outb_p(VGA_CRTC_OFFSET, vga_video_port_reg);
outb_p(width >> 1, vga_video_port_val);
- outb_p(VGA_CRTC_V_DISP_END, vga_video_port_reg);
- outb_p(scanlines_lo, vga_video_port_val);
- outb_p(VGA_CRTC_OVERFLOW, vga_video_port_reg);
- outb_p(r7,vga_video_port_val);
+ if (vga_video_type >= VIDEO_TYPE_VGAC) {
+ outb_p(VGA_CRTC_V_DISP_END, vga_video_port_reg);
+ outb_p(scanlines_lo, vga_video_port_val);
+ outb_p(VGA_CRTC_OVERFLOW, vga_video_port_reg);
+ outb_p(r7,vga_video_port_val);
- /* reprotect registers */
- outb_p(VGA_CRTC_V_SYNC_END, vga_video_port_reg);
- outb_p(vsync_end, vga_video_port_val);
+ /* reprotect registers */
+ outb_p(VGA_CRTC_V_SYNC_END, vga_video_port_reg);
+ outb_p(vsync_end, vga_video_port_val);
+ }
spin_unlock_irqrestore(&vga_lock, flags);
-
return 0;
}
diff --git a/drivers/video/gbefb.c b/drivers/video/gbefb.c
index c9a7cdf..5e25b98 100644
--- a/drivers/video/gbefb.c
+++ b/drivers/video/gbefb.c
@@ -656,12 +656,15 @@
switch (bytesPerPixel) {
case 1:
SET_GBE_FIELD(WID, TYP, val, GBE_CMODE_I8);
+ info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
break;
case 2:
SET_GBE_FIELD(WID, TYP, val, GBE_CMODE_ARGB5);
+ info->fix.visual = FB_VISUAL_TRUECOLOR;
break;
case 4:
SET_GBE_FIELD(WID, TYP, val, GBE_CMODE_RGB8);
+ info->fix.visual = FB_VISUAL_TRUECOLOR;
break;
}
SET_GBE_FIELD(WID, BUF, val, GBE_BMODE_BOTH);
diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c
index 1b117a4..c2eac2a 100644
--- a/fs/binfmt_elf.c
+++ b/fs/binfmt_elf.c
@@ -938,6 +938,11 @@
kfree(elf_interpreter);
} else {
elf_entry = loc->elf_ex.e_entry;
+ if (BAD_ADDR(elf_entry)) {
+ send_sig(SIGSEGV, current, 0);
+ retval = -ENOEXEC; /* Nobody gets to see this, but.. */
+ goto out_free_dentry;
+ }
}
kfree(elf_phdata);
diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c
index 057e602..537ac70 100644
--- a/fs/compat_ioctl.c
+++ b/fs/compat_ioctl.c
@@ -2531,18 +2531,9 @@
val32 = kval;
return put_user(val32, (unsigned int __user *)arg);
case RTC_IRQP_SET32:
+ return sys_ioctl(fd, RTC_IRQP_SET, arg);
case RTC_EPOCH_SET32:
- ret = get_user(val32, (unsigned int __user *)arg);
- if (ret)
- return ret;
- kval = val32;
-
- set_fs(KERNEL_DS);
- ret = sys_ioctl(fd, (cmd == RTC_IRQP_SET32) ?
- RTC_IRQP_SET : RTC_EPOCH_SET,
- (unsigned long)&kval);
- set_fs(oldfs);
- return ret;
+ return sys_ioctl(fd, RTC_EPOCH_SET, arg);
default:
/* unreached */
return -ENOIOCTLCMD;
diff --git a/fs/namei.c b/fs/namei.c
index e28de84..557dcf3 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -2224,13 +2224,17 @@
* and other special files. --ADM
*/
asmlinkage long sys_linkat(int olddfd, const char __user *oldname,
- int newdfd, const char __user *newname)
+ int newdfd, const char __user *newname,
+ int flags)
{
struct dentry *new_dentry;
struct nameidata nd, old_nd;
int error;
char * to;
+ if (flags != 0)
+ return -EINVAL;
+
to = getname(newname);
if (IS_ERR(to))
return PTR_ERR(to);
@@ -2263,7 +2267,7 @@
asmlinkage long sys_link(const char __user *oldname, const char __user *newname)
{
- return sys_linkat(AT_FDCWD, oldname, AT_FDCWD, newname);
+ return sys_linkat(AT_FDCWD, oldname, AT_FDCWD, newname, 0);
}
/*
diff --git a/fs/ntfs/ChangeLog b/fs/ntfs/ChangeLog
index 02f4409..9d8ffa8 100644
--- a/fs/ntfs/ChangeLog
+++ b/fs/ntfs/ChangeLog
@@ -1,9 +1,9 @@
ToDo/Notes:
- Find and fix bugs.
- The only places in the kernel where a file is resized are
- ntfs_file_write*() and ntfs_truncate() for both of which i_sem is
+ ntfs_file_write*() and ntfs_truncate() for both of which i_mutex is
held. Just have to be careful in read-/writepage and other helpers
- not running under i_sem that we play nice... Also need to be careful
+ not running under i_mutex that we play nice. Also need to be careful
with initialized_size extension in ntfs_file_write*() and writepage.
UPDATE: The only things that need to be checked are the compressed
write and the other attribute resize/write cases like index
@@ -19,6 +19,24 @@
- Enable the code for setting the NT4 compatibility flag when we start
making NTFS 1.2 specific modifications.
+2.1.26 - Minor bug fixes and updates.
+
+ - Fix a potential overflow in file.c where a cast to s64 was missing in
+ a left shift of a page index.
+ - The struct inode has had its i_sem semaphore changed to a mutex named
+ i_mutex.
+ - We have struct kmem_cache now so use it instead of the typedef
+ kmem_cache_t. (Pekka Enberg)
+ - Implement support for sector sizes above 512 bytes (up to the maximum
+ supported by NTFS which is 4096 bytes).
+ - Do more detailed reporting of why we cannot mount read-write by
+ special casing the VOLUME_MODIFIED_BY_CHKDSK flag.
+ - Miscellaneous updates to layout.h.
+ - Cope with attribute list attribute having invalid flags. Windows
+ copes with this and even chkdsk does not detect or fix this so we
+ have to cope with it, too. Thanks to Pawel Kot for reporting the
+ problem.
+
2.1.25 - (Almost) fully implement write(2) and truncate(2).
- Change ntfs_map_runlist_nolock(), ntfs_attr_find_vcn_nolock() and
@@ -373,7 +391,7 @@
single one of them had an mst error. (Thanks to Ken MacFerrin for
the bug report.)
- Fix error handling in fs/ntfs/quota.c::ntfs_mark_quotas_out_of_date()
- where we failed to release i_sem on the $Quota/$Q attribute inode.
+ where we failed to release i_mutex on the $Quota/$Q attribute inode.
- Fix bug in handling of bad inodes in fs/ntfs/namei.c::ntfs_lookup().
- Add mapping of unmapped buffers to all remaining code paths, i.e.
fs/ntfs/aops.c::ntfs_write_mst_block(), mft.c::ntfs_sync_mft_mirror(),
@@ -874,7 +892,7 @@
clusters. (Philipp Thomas)
- attrib.c::load_attribute_list(): Fix bug when initialized_size is a
multiple of the block_size but not the cluster size. (Szabolcs
- Szakacsits <szaka@sienet.hu>)
+ Szakacsits)
2.1.2 - Important bug fixes aleviating the hangs in statfs.
@@ -884,7 +902,7 @@
- Add handling for initialized_size != data_size in compressed files.
- Reduce function local stack usage from 0x3d4 bytes to just noise in
- fs/ntfs/upcase.c. (Randy Dunlap <rdunlap@xenotime.net>)
+ fs/ntfs/upcase.c. (Randy Dunlap)
- Remove compiler warnings for newer gcc.
- Pages are no longer kmapped by mm/filemap.c::generic_file_write()
around calls to ->{prepare,commit}_write. Adapt NTFS appropriately
@@ -1201,11 +1219,11 @@
the kernel. We probably want a kernel generic init_address_space()
function...
- Drop BKL from ntfs_readdir() after consultation with Al Viro. The
- only caller of ->readdir() is vfs_readdir() which holds i_sem during
- the call, and i_sem is sufficient protection against changes in the
- directory inode (including ->i_size).
+ only caller of ->readdir() is vfs_readdir() which holds i_mutex
+ during the call, and i_mutex is sufficient protection against changes
+ in the directory inode (including ->i_size).
- Use generic_file_llseek() for directories (as opposed to
- default_llseek()) as this downs i_sem instead of the BKL which is
+ default_llseek()) as this downs i_mutex instead of the BKL which is
what we now need for exclusion against ->f_pos changes considering we
no longer take the BKL in ntfs_readdir().
diff --git a/fs/ntfs/Makefile b/fs/ntfs/Makefile
index d0d45d1..d95fac7 100644
--- a/fs/ntfs/Makefile
+++ b/fs/ntfs/Makefile
@@ -6,7 +6,7 @@
index.o inode.o mft.o mst.o namei.o runlist.o super.o sysctl.o \
unistr.o upcase.o
-EXTRA_CFLAGS = -DNTFS_VERSION=\"2.1.25\"
+EXTRA_CFLAGS = -DNTFS_VERSION=\"2.1.26\"
ifeq ($(CONFIG_NTFS_DEBUG),y)
EXTRA_CFLAGS += -DDEBUG
diff --git a/fs/ntfs/aops.c b/fs/ntfs/aops.c
index 1c0a431..7e361da 100644
--- a/fs/ntfs/aops.c
+++ b/fs/ntfs/aops.c
@@ -2,7 +2,7 @@
* aops.c - NTFS kernel address space operations and page cache handling.
* Part of the Linux-NTFS project.
*
- * Copyright (c) 2001-2005 Anton Altaparmakov
+ * Copyright (c) 2001-2006 Anton Altaparmakov
* Copyright (c) 2002 Richard Russon
*
* This program/include file is free software; you can redistribute it and/or
@@ -200,8 +200,8 @@
/* $MFT/$DATA must have its complete runlist in memory at all times. */
BUG_ON(!ni->runlist.rl && !ni->mft_no && !NInoAttr(ni));
- blocksize_bits = VFS_I(ni)->i_blkbits;
- blocksize = 1 << blocksize_bits;
+ blocksize = vol->sb->s_blocksize;
+ blocksize_bits = vol->sb->s_blocksize_bits;
if (!page_has_buffers(page)) {
create_empty_buffers(page, blocksize, 0);
@@ -569,10 +569,8 @@
BUG_ON(!NInoNonResident(ni));
BUG_ON(NInoMstProtected(ni));
-
- blocksize_bits = vi->i_blkbits;
- blocksize = 1 << blocksize_bits;
-
+ blocksize = vol->sb->s_blocksize;
+ blocksize_bits = vol->sb->s_blocksize_bits;
if (!page_has_buffers(page)) {
BUG_ON(!PageUptodate(page));
create_empty_buffers(page, blocksize,
@@ -949,8 +947,8 @@
*/
BUG_ON(!(is_mft || S_ISDIR(vi->i_mode) ||
(NInoAttr(ni) && ni->type == AT_INDEX_ALLOCATION)));
- bh_size_bits = vi->i_blkbits;
- bh_size = 1 << bh_size_bits;
+ bh_size = vol->sb->s_blocksize;
+ bh_size_bits = vol->sb->s_blocksize_bits;
max_bhs = PAGE_CACHE_SIZE / bh_size;
BUG_ON(!max_bhs);
BUG_ON(max_bhs > MAX_BUF_PER_PAGE);
@@ -1596,7 +1594,7 @@
BUG_ON(!PageUptodate(page));
end = ofs + ni->itype.index.block_size;
- bh_size = 1 << VFS_I(ni)->i_blkbits;
+ bh_size = VFS_I(ni)->i_sb->s_blocksize;
spin_lock(&mapping->private_lock);
if (unlikely(!page_has_buffers(page))) {
spin_unlock(&mapping->private_lock);
diff --git a/fs/ntfs/file.c b/fs/ntfs/file.c
index fb413d3..5027d3d 100644
--- a/fs/ntfs/file.c
+++ b/fs/ntfs/file.c
@@ -1,7 +1,7 @@
/*
* file.c - NTFS kernel file operations. Part of the Linux-NTFS project.
*
- * Copyright (c) 2001-2005 Anton Altaparmakov
+ * Copyright (c) 2001-2006 Anton Altaparmakov
*
* This program/include file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as published
@@ -248,7 +248,7 @@
* enough to make ntfs_writepage() work.
*/
write_lock_irqsave(&ni->size_lock, flags);
- ni->initialized_size = (index + 1) << PAGE_CACHE_SHIFT;
+ ni->initialized_size = (s64)(index + 1) << PAGE_CACHE_SHIFT;
if (ni->initialized_size > new_init_size)
ni->initialized_size = new_init_size;
write_unlock_irqrestore(&ni->size_lock, flags);
@@ -529,8 +529,8 @@
"index 0x%lx, nr_pages 0x%x, pos 0x%llx, bytes 0x%zx.",
vi->i_ino, ni->type, pages[0]->index, nr_pages,
(long long)pos, bytes);
- blocksize_bits = vi->i_blkbits;
- blocksize = 1 << blocksize_bits;
+ blocksize = vol->sb->s_blocksize;
+ blocksize_bits = vol->sb->s_blocksize_bits;
u = 0;
do {
struct page *page = pages[u];
@@ -1525,7 +1525,7 @@
vi = pages[0]->mapping->host;
ni = NTFS_I(vi);
- blocksize = 1 << vi->i_blkbits;
+ blocksize = vi->i_sb->s_blocksize;
end = pos + bytes;
u = 0;
do {
diff --git a/fs/ntfs/inode.c b/fs/ntfs/inode.c
index ea1bd3f..55263b7 100644
--- a/fs/ntfs/inode.c
+++ b/fs/ntfs/inode.c
@@ -677,13 +677,28 @@
ntfs_debug("Attribute list found in inode 0x%lx.", vi->i_ino);
NInoSetAttrList(ni);
a = ctx->attr;
- if (a->flags & ATTR_IS_ENCRYPTED ||
- a->flags & ATTR_COMPRESSION_MASK ||
- a->flags & ATTR_IS_SPARSE) {
+ if (a->flags & ATTR_COMPRESSION_MASK) {
ntfs_error(vi->i_sb, "Attribute list attribute is "
- "compressed/encrypted/sparse.");
+ "compressed.");
goto unm_err_out;
}
+ if (a->flags & ATTR_IS_ENCRYPTED ||
+ a->flags & ATTR_IS_SPARSE) {
+ if (a->non_resident) {
+ ntfs_error(vi->i_sb, "Non-resident attribute "
+ "list attribute is encrypted/"
+ "sparse.");
+ goto unm_err_out;
+ }
+ ntfs_warning(vi->i_sb, "Resident attribute list "
+ "attribute in inode 0x%lx is marked "
+ "encrypted/sparse which is not true. "
+ "However, Windows allows this and "
+ "chkdsk does not detect or correct it "
+ "so we will just ignore the invalid "
+ "flags and pretend they are not set.",
+ vi->i_ino);
+ }
/* Now allocate memory for the attribute list. */
ni->attr_list_size = (u32)ntfs_attr_size(a);
ni->attr_list = ntfs_malloc_nofs(ni->attr_list_size);
@@ -1809,19 +1824,33 @@
} else /* if (!err) */ {
ATTR_LIST_ENTRY *al_entry, *next_al_entry;
u8 *al_end;
+ static const char *es = " Not allowed. $MFT is corrupt. "
+ "You should run chkdsk.";
ntfs_debug("Attribute list attribute found in $MFT.");
NInoSetAttrList(ni);
a = ctx->attr;
- if (a->flags & ATTR_IS_ENCRYPTED ||
- a->flags & ATTR_COMPRESSION_MASK ||
- a->flags & ATTR_IS_SPARSE) {
+ if (a->flags & ATTR_COMPRESSION_MASK) {
ntfs_error(sb, "Attribute list attribute is "
- "compressed/encrypted/sparse. Not "
- "allowed. $MFT is corrupt. You should "
- "run chkdsk.");
+ "compressed.%s", es);
goto put_err_out;
}
+ if (a->flags & ATTR_IS_ENCRYPTED ||
+ a->flags & ATTR_IS_SPARSE) {
+ if (a->non_resident) {
+ ntfs_error(sb, "Non-resident attribute list "
+ "attribute is encrypted/"
+ "sparse.%s", es);
+ goto put_err_out;
+ }
+ ntfs_warning(sb, "Resident attribute list attribute "
+ "in $MFT system file is marked "
+ "encrypted/sparse which is not true. "
+ "However, Windows allows this and "
+ "chkdsk does not detect or correct it "
+ "so we will just ignore the invalid "
+ "flags and pretend they are not set.");
+ }
/* Now allocate memory for the attribute list. */
ni->attr_list_size = (u32)ntfs_attr_size(a);
ni->attr_list = ntfs_malloc_nofs(ni->attr_list_size);
diff --git a/fs/ntfs/layout.h b/fs/ntfs/layout.h
index f5678d5..bb408d4 100644
--- a/fs/ntfs/layout.h
+++ b/fs/ntfs/layout.h
@@ -838,15 +838,19 @@
F_A_DEVICE, F_A_DIRECTORY, F_A_SPARSE_FILE, F_A_REPARSE_POINT,
F_A_COMPRESSED, and F_A_ENCRYPTED and preserves the rest. This mask
is used to to obtain all flags that are valid for setting. */
-
/*
- * The following flags are only present in the FILE_NAME attribute (in
+ * The following flag is only present in the FILE_NAME attribute (in
* the field file_attributes).
*/
FILE_ATTR_DUP_FILE_NAME_INDEX_PRESENT = const_cpu_to_le32(0x10000000),
/* Note, this is a copy of the corresponding bit from the mft record,
telling us whether this is a directory or not, i.e. whether it has
an index root attribute or not. */
+ /*
+ * The following flag is present both in the STANDARD_INFORMATION
+ * attribute and in the FILE_NAME attribute (in the field
+ * file_attributes).
+ */
FILE_ATTR_DUP_VIEW_INDEX_PRESENT = const_cpu_to_le32(0x20000000),
/* Note, this is a copy of the corresponding bit from the mft record,
telling us whether this file has a view index present (eg. object id
@@ -1071,9 +1075,15 @@
modified. */
/* 20*/ sle64 last_access_time; /* Time this mft record was last
accessed. */
-/* 28*/ sle64 allocated_size; /* Byte size of allocated space for the
- data attribute. NOTE: Is a multiple
- of the cluster size. */
+/* 28*/ sle64 allocated_size; /* Byte size of on-disk allocated space
+ for the data attribute. So for
+ normal $DATA, this is the
+ allocated_size from the unnamed
+ $DATA attribute and for compressed
+ and/or sparse $DATA, this is the
+ compressed_size from the unnamed
+ $DATA attribute. NOTE: This is a
+ multiple of the cluster size. */
/* 30*/ sle64 data_size; /* Byte size of actual data in data
attribute. */
/* 38*/ FILE_ATTR_FLAGS file_attributes; /* Flags describing the file. */
@@ -1904,12 +1914,13 @@
VOLUME_DELETE_USN_UNDERWAY = const_cpu_to_le16(0x0010),
VOLUME_REPAIR_OBJECT_ID = const_cpu_to_le16(0x0020),
+ VOLUME_CHKDSK_UNDERWAY = const_cpu_to_le16(0x4000),
VOLUME_MODIFIED_BY_CHKDSK = const_cpu_to_le16(0x8000),
- VOLUME_FLAGS_MASK = const_cpu_to_le16(0x803f),
+ VOLUME_FLAGS_MASK = const_cpu_to_le16(0xc03f),
/* To make our life easier when checking if we must mount read-only. */
- VOLUME_MUST_MOUNT_RO_MASK = const_cpu_to_le16(0x8027),
+ VOLUME_MUST_MOUNT_RO_MASK = const_cpu_to_le16(0xc027),
} __attribute__ ((__packed__));
typedef le16 VOLUME_FLAGS;
diff --git a/fs/ntfs/mft.c b/fs/ntfs/mft.c
index 0c65cbb..6499aaf 100644
--- a/fs/ntfs/mft.c
+++ b/fs/ntfs/mft.c
@@ -1,7 +1,7 @@
/**
* mft.c - NTFS kernel mft record operations. Part of the Linux-NTFS project.
*
- * Copyright (c) 2001-2005 Anton Altaparmakov
+ * Copyright (c) 2001-2006 Anton Altaparmakov
* Copyright (c) 2002 Richard Russon
*
* This program/include file is free software; you can redistribute it and/or
@@ -473,7 +473,7 @@
runlist_element *rl;
unsigned int block_start, block_end, m_start, m_end, page_ofs;
int i_bhs, nr_bhs, err = 0;
- unsigned char blocksize_bits = vol->mftmirr_ino->i_blkbits;
+ unsigned char blocksize_bits = vol->sb->s_blocksize_bits;
ntfs_debug("Entering for inode 0x%lx.", mft_no);
BUG_ON(!max_bhs);
@@ -672,8 +672,8 @@
{
ntfs_volume *vol = ni->vol;
struct page *page = ni->page;
- unsigned char blocksize_bits = vol->mft_ino->i_blkbits;
- unsigned int blocksize = 1 << blocksize_bits;
+ unsigned int blocksize = vol->sb->s_blocksize;
+ unsigned char blocksize_bits = vol->sb->s_blocksize_bits;
int max_bhs = vol->mft_record_size / blocksize;
struct buffer_head *bhs[max_bhs];
struct buffer_head *bh, *head;
diff --git a/fs/ntfs/ntfs.h b/fs/ntfs/ntfs.h
index 446b501..653d2a5 100644
--- a/fs/ntfs/ntfs.h
+++ b/fs/ntfs/ntfs.h
@@ -50,11 +50,11 @@
/* Global variables. */
/* Slab caches (from super.c). */
-extern kmem_cache_t *ntfs_name_cache;
-extern kmem_cache_t *ntfs_inode_cache;
-extern kmem_cache_t *ntfs_big_inode_cache;
-extern kmem_cache_t *ntfs_attr_ctx_cache;
-extern kmem_cache_t *ntfs_index_ctx_cache;
+extern struct kmem_cache *ntfs_name_cache;
+extern struct kmem_cache *ntfs_inode_cache;
+extern struct kmem_cache *ntfs_big_inode_cache;
+extern struct kmem_cache *ntfs_attr_ctx_cache;
+extern struct kmem_cache *ntfs_index_ctx_cache;
/* The various operations structs defined throughout the driver files. */
extern struct address_space_operations ntfs_aops;
diff --git a/fs/ntfs/super.c b/fs/ntfs/super.c
index c3a3f1a..368a8ec 100644
--- a/fs/ntfs/super.c
+++ b/fs/ntfs/super.c
@@ -1,7 +1,7 @@
/*
* super.c - NTFS kernel super block handling. Part of the Linux-NTFS project.
*
- * Copyright (c) 2001-2005 Anton Altaparmakov
+ * Copyright (c) 2001-2006 Anton Altaparmakov
* Copyright (c) 2001,2002 Richard Russon
*
* This program/include file is free software; you can redistribute it and/or
@@ -22,6 +22,7 @@
#include <linux/stddef.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/string.h>
#include <linux/spinlock.h>
#include <linux/blkdev.h> /* For bdev_hardsect_size(). */
@@ -471,9 +472,16 @@
ntfs_error(sb, "Volume is dirty and read-only%s", es);
return -EROFS;
}
+ if (vol->vol_flags & VOLUME_MODIFIED_BY_CHKDSK) {
+ ntfs_error(sb, "Volume has been modified by chkdsk "
+ "and is read-only%s", es);
+ return -EROFS;
+ }
if (vol->vol_flags & VOLUME_MUST_MOUNT_RO_MASK) {
- ntfs_error(sb, "Volume has unsupported flags set and "
- "is read-only%s", es);
+ ntfs_error(sb, "Volume has unsupported flags set "
+ "(0x%x) and is read-only%s",
+ (unsigned)le16_to_cpu(vol->vol_flags),
+ es);
return -EROFS;
}
if (ntfs_set_volume_flags(vol, VOLUME_IS_DIRTY)) {
@@ -641,7 +649,7 @@
{
const char *read_err_str = "Unable to read %s boot sector.";
struct buffer_head *bh_primary, *bh_backup;
- long nr_blocks = NTFS_SB(sb)->nr_blocks;
+ sector_t nr_blocks = NTFS_SB(sb)->nr_blocks;
/* Try to read primary boot sector. */
if ((bh_primary = sb_bread(sb, 0))) {
@@ -688,13 +696,18 @@
/*
* If we managed to read sector zero and the volume is not
* read-only, copy the found, valid backup boot sector to the
- * primary boot sector.
+ * primary boot sector. Note we only copy the actual boot
+ * sector structure, not the actual whole device sector as that
+ * may be bigger and would potentially damage the $Boot system
+ * file (FIXME: Would be nice to know if the backup boot sector
+ * on a large sector device contains the whole boot loader or
+ * just the first 512 bytes).
*/
if (!(sb->s_flags & MS_RDONLY)) {
ntfs_warning(sb, "Hot-fix: Recovering invalid primary "
"boot sector from backup copy.");
memcpy(bh_primary->b_data, bh_backup->b_data,
- sb->s_blocksize);
+ NTFS_BLOCK_SIZE);
mark_buffer_dirty(bh_primary);
sync_dirty_buffer(bh_primary);
if (buffer_uptodate(bh_primary)) {
@@ -733,9 +746,13 @@
vol->sector_size);
ntfs_debug("vol->sector_size_bits = %i (0x%x)", vol->sector_size_bits,
vol->sector_size_bits);
- if (vol->sector_size != vol->sb->s_blocksize)
- ntfs_warning(vol->sb, "The boot sector indicates a sector size "
- "different from the device sector size.");
+ if (vol->sector_size < vol->sb->s_blocksize) {
+ ntfs_error(vol->sb, "Sector size (%i) is smaller than the "
+ "device block size (%lu). This is not "
+ "supported. Sorry.", vol->sector_size,
+ vol->sb->s_blocksize);
+ return FALSE;
+ }
ntfs_debug("sectors_per_cluster = 0x%x", b->bpb.sectors_per_cluster);
sectors_per_cluster_bits = ffs(b->bpb.sectors_per_cluster) - 1;
ntfs_debug("sectors_per_cluster_bits = 0x%x",
@@ -748,16 +765,11 @@
ntfs_debug("vol->cluster_size = %i (0x%x)", vol->cluster_size,
vol->cluster_size);
ntfs_debug("vol->cluster_size_mask = 0x%x", vol->cluster_size_mask);
- ntfs_debug("vol->cluster_size_bits = %i (0x%x)",
- vol->cluster_size_bits, vol->cluster_size_bits);
- if (vol->sector_size > vol->cluster_size) {
- ntfs_error(vol->sb, "Sector sizes above the cluster size are "
- "not supported. Sorry.");
- return FALSE;
- }
- if (vol->sb->s_blocksize > vol->cluster_size) {
- ntfs_error(vol->sb, "Cluster sizes smaller than the device "
- "sector size are not supported. Sorry.");
+ ntfs_debug("vol->cluster_size_bits = %i", vol->cluster_size_bits);
+ if (vol->cluster_size < vol->sector_size) {
+ ntfs_error(vol->sb, "Cluster size (%i) is smaller than the "
+ "sector size (%i). This is not supported. "
+ "Sorry.", vol->cluster_size, vol->sector_size);
return FALSE;
}
clusters_per_mft_record = b->clusters_per_mft_record;
@@ -786,11 +798,18 @@
* we store $MFT/$DATA, the table of mft records in the page cache.
*/
if (vol->mft_record_size > PAGE_CACHE_SIZE) {
- ntfs_error(vol->sb, "Mft record size %i (0x%x) exceeds the "
- "page cache size on your system %lu (0x%lx). "
+ ntfs_error(vol->sb, "Mft record size (%i) exceeds the "
+ "PAGE_CACHE_SIZE on your system (%lu). "
"This is not supported. Sorry.",
- vol->mft_record_size, vol->mft_record_size,
- PAGE_CACHE_SIZE, PAGE_CACHE_SIZE);
+ vol->mft_record_size, PAGE_CACHE_SIZE);
+ return FALSE;
+ }
+ /* We cannot support mft record sizes below the sector size. */
+ if (vol->mft_record_size < vol->sector_size) {
+ ntfs_error(vol->sb, "Mft record size (%i) is smaller than the "
+ "sector size (%i). This is not supported. "
+ "Sorry.", vol->mft_record_size,
+ vol->sector_size);
return FALSE;
}
clusters_per_index_record = b->clusters_per_index_record;
@@ -816,6 +835,14 @@
ntfs_debug("vol->index_record_size_bits = %i (0x%x)",
vol->index_record_size_bits,
vol->index_record_size_bits);
+ /* We cannot support index record sizes below the sector size. */
+ if (vol->index_record_size < vol->sector_size) {
+ ntfs_error(vol->sb, "Index record size (%i) is smaller than "
+ "the sector size (%i). This is not "
+ "supported. Sorry.", vol->index_record_size,
+ vol->sector_size);
+ return FALSE;
+ }
/*
* Get the size of the volume in clusters and check for 64-bit-ness.
* Windows currently only uses 32 bits to save the clusters so we do
@@ -845,15 +872,18 @@
}
ll = sle64_to_cpu(b->mft_lcn);
if (ll >= vol->nr_clusters) {
- ntfs_error(vol->sb, "MFT LCN is beyond end of volume. Weird.");
+ ntfs_error(vol->sb, "MFT LCN (%lli, 0x%llx) is beyond end of "
+ "volume. Weird.", (unsigned long long)ll,
+ (unsigned long long)ll);
return FALSE;
}
vol->mft_lcn = ll;
ntfs_debug("vol->mft_lcn = 0x%llx", (long long)vol->mft_lcn);
ll = sle64_to_cpu(b->mftmirr_lcn);
if (ll >= vol->nr_clusters) {
- ntfs_error(vol->sb, "MFTMirr LCN is beyond end of volume. "
- "Weird.");
+ ntfs_error(vol->sb, "MFTMirr LCN (%lli, 0x%llx) is beyond end "
+ "of volume. Weird.", (unsigned long long)ll,
+ (unsigned long long)ll);
return FALSE;
}
vol->mftmirr_lcn = ll;
@@ -1822,11 +1852,24 @@
/* Make sure that no unsupported volume flags are set. */
if (vol->vol_flags & VOLUME_MUST_MOUNT_RO_MASK) {
static const char *es1a = "Volume is dirty";
- static const char *es1b = "Volume has unsupported flags set";
- static const char *es2 = ". Run chkdsk and mount in Windows.";
- const char *es1;
-
- es1 = vol->vol_flags & VOLUME_IS_DIRTY ? es1a : es1b;
+ static const char *es1b = "Volume has been modified by chkdsk";
+ static const char *es1c = "Volume has unsupported flags set";
+ static const char *es2a = ". Run chkdsk and mount in Windows.";
+ static const char *es2b = ". Mount in Windows.";
+ const char *es1, *es2;
+
+ es2 = es2a;
+ if (vol->vol_flags & VOLUME_IS_DIRTY)
+ es1 = es1a;
+ else if (vol->vol_flags & VOLUME_MODIFIED_BY_CHKDSK) {
+ es1 = es1b;
+ es2 = es2b;
+ } else {
+ es1 = es1c;
+ ntfs_warning(sb, "Unsupported volume flags 0x%x "
+ "encountered.",
+ (unsigned)le16_to_cpu(vol->vol_flags));
+ }
/* If a read-write mount, convert it to a read-only mount. */
if (!(sb->s_flags & MS_RDONLY)) {
if (!(vol->on_errors & (ON_ERRORS_REMOUNT_RO |
@@ -2685,7 +2728,7 @@
ntfs_volume *vol;
struct buffer_head *bh;
struct inode *tmp_ino;
- int result;
+ int blocksize, result;
ntfs_debug("Entering.");
#ifndef NTFS_RW
@@ -2724,60 +2767,85 @@
if (!parse_options(vol, (char*)opt))
goto err_out_now;
+ /* We support sector sizes up to the PAGE_CACHE_SIZE. */
+ if (bdev_hardsect_size(sb->s_bdev) > PAGE_CACHE_SIZE) {
+ if (!silent)
+ ntfs_error(sb, "Device has unsupported sector size "
+ "(%i). The maximum supported sector "
+ "size on this architecture is %lu "
+ "bytes.",
+ bdev_hardsect_size(sb->s_bdev),
+ PAGE_CACHE_SIZE);
+ goto err_out_now;
+ }
/*
- * TODO: Fail safety check. In the future we should really be able to
- * cope with this being the case, but for now just bail out.
+ * Setup the device access block size to NTFS_BLOCK_SIZE or the hard
+ * sector size, whichever is bigger.
*/
- if (bdev_hardsect_size(sb->s_bdev) > NTFS_BLOCK_SIZE) {
+ blocksize = sb_min_blocksize(sb, NTFS_BLOCK_SIZE);
+ if (blocksize < NTFS_BLOCK_SIZE) {
if (!silent)
- ntfs_error(sb, "Device has unsupported hardsect_size.");
+ ntfs_error(sb, "Unable to set device block size.");
goto err_out_now;
}
-
- /* Setup the device access block size to NTFS_BLOCK_SIZE. */
- if (sb_set_blocksize(sb, NTFS_BLOCK_SIZE) != NTFS_BLOCK_SIZE) {
+ BUG_ON(blocksize != sb->s_blocksize);
+ ntfs_debug("Set device block size to %i bytes (block size bits %i).",
+ blocksize, sb->s_blocksize_bits);
+ /* Determine the size of the device in units of block_size bytes. */
+ if (!i_size_read(sb->s_bdev->bd_inode)) {
if (!silent)
- ntfs_error(sb, "Unable to set block size.");
+ ntfs_error(sb, "Unable to determine device size.");
goto err_out_now;
}
-
- /* Get the size of the device in units of NTFS_BLOCK_SIZE bytes. */
vol->nr_blocks = i_size_read(sb->s_bdev->bd_inode) >>
- NTFS_BLOCK_SIZE_BITS;
-
+ sb->s_blocksize_bits;
/* Read the boot sector and return unlocked buffer head to it. */
if (!(bh = read_ntfs_boot_sector(sb, silent))) {
if (!silent)
ntfs_error(sb, "Not an NTFS volume.");
goto err_out_now;
}
-
/*
- * Extract the data from the boot sector and setup the ntfs super block
+ * Extract the data from the boot sector and setup the ntfs volume
* using it.
*/
result = parse_ntfs_boot_sector(vol, (NTFS_BOOT_SECTOR*)bh->b_data);
-
- /* Initialize the cluster and mft allocators. */
- ntfs_setup_allocators(vol);
-
brelse(bh);
-
if (!result) {
if (!silent)
ntfs_error(sb, "Unsupported NTFS filesystem.");
goto err_out_now;
}
-
/*
- * TODO: When we start coping with sector sizes different from
- * NTFS_BLOCK_SIZE, we now probably need to set the blocksize of the
- * device (probably to NTFS_BLOCK_SIZE).
+ * If the boot sector indicates a sector size bigger than the current
+ * device block size, switch the device block size to the sector size.
+ * TODO: It may be possible to support this case even when the set
+ * below fails, we would just be breaking up the i/o for each sector
+ * into multiple blocks for i/o purposes but otherwise it should just
+ * work. However it is safer to leave disabled until someone hits this
+ * error message and then we can get them to try it without the setting
+ * so we know for sure that it works.
*/
-
+ if (vol->sector_size > blocksize) {
+ blocksize = sb_set_blocksize(sb, vol->sector_size);
+ if (blocksize != vol->sector_size) {
+ if (!silent)
+ ntfs_error(sb, "Unable to set device block "
+ "size to sector size (%i).",
+ vol->sector_size);
+ goto err_out_now;
+ }
+ BUG_ON(blocksize != sb->s_blocksize);
+ vol->nr_blocks = i_size_read(sb->s_bdev->bd_inode) >>
+ sb->s_blocksize_bits;
+ ntfs_debug("Changed device block size to %i bytes (block size "
+ "bits %i) to match volume sector size.",
+ blocksize, sb->s_blocksize_bits);
+ }
+ /* Initialize the cluster and mft allocators. */
+ ntfs_setup_allocators(vol);
/* Setup remaining fields in the super block. */
sb->s_magic = NTFS_SB_MAGIC;
-
/*
* Ntfs allows 63 bits for the file size, i.e. correct would be:
* sb->s_maxbytes = ~0ULL >> 1;
@@ -2787,9 +2855,8 @@
* without overflowing the index or to 2^63 - 1, whichever is smaller.
*/
sb->s_maxbytes = MAX_LFS_FILESIZE;
-
+ /* Ntfs measures time in 100ns intervals. */
sb->s_time_gran = 100;
-
/*
* Now load the metadata required for the page cache and our address
* space operations to function. We do this by setting up a specialised
@@ -2987,14 +3054,14 @@
* strings of the maximum length allowed by NTFS, which is NTFS_MAX_NAME_LEN
* (255) Unicode characters + a terminating NULL Unicode character.
*/
-kmem_cache_t *ntfs_name_cache;
+struct kmem_cache *ntfs_name_cache;
/* Slab caches for efficient allocation/deallocation of inodes. */
-kmem_cache_t *ntfs_inode_cache;
-kmem_cache_t *ntfs_big_inode_cache;
+struct kmem_cache *ntfs_inode_cache;
+struct kmem_cache *ntfs_big_inode_cache;
/* Init once constructor for the inode slab cache. */
-static void ntfs_big_inode_init_once(void *foo, kmem_cache_t *cachep,
+static void ntfs_big_inode_init_once(void *foo, struct kmem_cache *cachep,
unsigned long flags)
{
ntfs_inode *ni = (ntfs_inode *)foo;
@@ -3008,8 +3075,8 @@
* Slab caches to optimize allocations and deallocations of attribute search
* contexts and index contexts, respectively.
*/
-kmem_cache_t *ntfs_attr_ctx_cache;
-kmem_cache_t *ntfs_index_ctx_cache;
+struct kmem_cache *ntfs_attr_ctx_cache;
+struct kmem_cache *ntfs_index_ctx_cache;
/* Driver wide semaphore. */
DECLARE_MUTEX(ntfs_lock);
diff --git a/fs/ntfs/upcase.c b/fs/ntfs/upcase.c
index 879cdf1..9101807 100644
--- a/fs/ntfs/upcase.c
+++ b/fs/ntfs/upcase.c
@@ -3,10 +3,7 @@
* Part of the Linux-NTFS project.
*
* Copyright (c) 2001 Richard Russon <ntfs@flatcap.org>
- * Copyright (c) 2001-2004 Anton Altaparmakov
- *
- * Modified for mkntfs inclusion 9 June 2001 by Anton Altaparmakov.
- * Modified for kernel inclusion 10 September 2001 by Anton Altparmakov.
+ * Copyright (c) 2001-2006 Anton Altaparmakov
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
@@ -75,12 +72,13 @@
if (!uc)
return uc;
memset(uc, 0, default_upcase_len * sizeof(ntfschar));
+ /* Generate the little endian Unicode upcase table used by ntfs. */
for (i = 0; i < default_upcase_len; i++)
uc[i] = cpu_to_le16(i);
for (r = 0; uc_run_table[r][0]; r++)
for (i = uc_run_table[r][0]; i < uc_run_table[r][1]; i++)
- uc[i] = cpu_to_le16((le16_to_cpu(uc[i]) +
- uc_run_table[r][2]));
+ uc[i] = cpu_to_le16(le16_to_cpu(uc[i]) +
+ uc_run_table[r][2]);
for (r = 0; uc_dup_table[r][0]; r++)
for (i = uc_dup_table[r][0]; i < uc_dup_table[r][1]; i += 2)
uc[i + 1] = cpu_to_le16(le16_to_cpu(uc[i + 1]) - 1);
diff --git a/fs/ntfs/volume.h b/fs/ntfs/volume.h
index 375cd20..406ab55 100644
--- a/fs/ntfs/volume.h
+++ b/fs/ntfs/volume.h
@@ -2,7 +2,7 @@
* volume.h - Defines for volume structures in NTFS Linux kernel driver. Part
* of the Linux-NTFS project.
*
- * Copyright (c) 2001-2005 Anton Altaparmakov
+ * Copyright (c) 2001-2006 Anton Altaparmakov
* Copyright (c) 2002 Richard Russon
*
* This program/include file is free software; you can redistribute it and/or
@@ -41,10 +41,8 @@
* structure has stabilized... (AIA)
*/
/* Device specifics. */
- struct super_block *sb; /* Pointer back to the super_block,
- so we don't have to get the offset
- every time. */
- LCN nr_blocks; /* Number of NTFS_BLOCK_SIZE bytes
+ struct super_block *sb; /* Pointer back to the super_block. */
+ LCN nr_blocks; /* Number of sb->s_blocksize bytes
sized blocks on the device. */
/* Configuration provided by user at mount time. */
unsigned long flags; /* Miscellaneous flags, see below. */
@@ -141,8 +139,8 @@
NV_ShowSystemFiles, /* 1: Return system files in ntfs_readdir(). */
NV_CaseSensitive, /* 1: Treat file names as case sensitive and
create filenames in the POSIX namespace.
- Otherwise be case insensitive and create
- file names in WIN32 namespace. */
+ Otherwise be case insensitive but still
+ create file names in POSIX namespace. */
NV_LogFileEmpty, /* 1: $LogFile journal is empty. */
NV_QuotaOutOfDate, /* 1: $Quota is out of date. */
NV_UsnJrnlStamped, /* 1: $UsnJrnl has been stamped. */
@@ -153,7 +151,7 @@
* Macro tricks to expand the NVolFoo(), NVolSetFoo(), and NVolClearFoo()
* functions.
*/
-#define NVOL_FNS(flag) \
+#define DEFINE_NVOL_BIT_OPS(flag) \
static inline int NVol##flag(ntfs_volume *vol) \
{ \
return test_bit(NV_##flag, &(vol)->flags); \
@@ -168,12 +166,12 @@
}
/* Emit the ntfs volume bitops functions. */
-NVOL_FNS(Errors)
-NVOL_FNS(ShowSystemFiles)
-NVOL_FNS(CaseSensitive)
-NVOL_FNS(LogFileEmpty)
-NVOL_FNS(QuotaOutOfDate)
-NVOL_FNS(UsnJrnlStamped)
-NVOL_FNS(SparseEnabled)
+DEFINE_NVOL_BIT_OPS(Errors)
+DEFINE_NVOL_BIT_OPS(ShowSystemFiles)
+DEFINE_NVOL_BIT_OPS(CaseSensitive)
+DEFINE_NVOL_BIT_OPS(LogFileEmpty)
+DEFINE_NVOL_BIT_OPS(QuotaOutOfDate)
+DEFINE_NVOL_BIT_OPS(UsnJrnlStamped)
+DEFINE_NVOL_BIT_OPS(SparseEnabled)
#endif /* _LINUX_NTFS_VOLUME_H */
diff --git a/fs/ramfs/inode.c b/fs/ramfs/inode.c
index c66bd5e..cde5d48 100644
--- a/fs/ramfs/inode.c
+++ b/fs/ramfs/inode.c
@@ -27,6 +27,7 @@
#include <linux/fs.h>
#include <linux/pagemap.h>
#include <linux/highmem.h>
+#include <linux/time.h>
#include <linux/init.h>
#include <linux/string.h>
#include <linux/smp_lock.h>
@@ -104,6 +105,7 @@
d_instantiate(dentry, inode);
dget(dentry); /* Extra count - pin the dentry in core */
error = 0;
+ dir->i_mtime = dir->i_ctime = CURRENT_TIME;
}
return error;
}
diff --git a/include/asm-i386/desc.h b/include/asm-i386/desc.h
index 494e73b..89b8b82 100644
--- a/include/asm-i386/desc.h
+++ b/include/asm-i386/desc.h
@@ -24,11 +24,13 @@
unsigned short pad;
} __attribute__ ((packed));
-extern struct Xgt_desc_struct idt_descr, cpu_gdt_descr[NR_CPUS];
+extern struct Xgt_desc_struct idt_descr;
+DECLARE_PER_CPU(struct Xgt_desc_struct, cpu_gdt_descr);
+
static inline struct desc_struct *get_cpu_gdt_table(unsigned int cpu)
{
- return ((struct desc_struct *)cpu_gdt_descr[cpu].address);
+ return (struct desc_struct *)per_cpu(cpu_gdt_descr, cpu).address;
}
#define load_TR_desc() __asm__ __volatile__("ltr %w0"::"q" (GDT_ENTRY_TSS*8))
diff --git a/include/asm-i386/kprobes.h b/include/asm-i386/kprobes.h
index 27cac05..a0d2d74 100644
--- a/include/asm-i386/kprobes.h
+++ b/include/asm-i386/kprobes.h
@@ -27,6 +27,9 @@
#include <linux/types.h>
#include <linux/ptrace.h>
+#define __ARCH_WANT_KPROBES_INSN_SLOT
+
+struct kprobe;
struct pt_regs;
typedef u8 kprobe_opcode_t;
@@ -40,14 +43,14 @@
#define JPROBE_ENTRY(pentry) (kprobe_opcode_t *)pentry
#define ARCH_SUPPORTS_KRETPROBES
-#define arch_remove_kprobe(p) do {} while (0)
+void arch_remove_kprobe(struct kprobe *p);
void kretprobe_trampoline(void);
/* Architecture specific copy of original instruction*/
struct arch_specific_insn {
/* copy of the original instruction */
- kprobe_opcode_t insn[MAX_INSN_SIZE];
+ kprobe_opcode_t *insn;
};
struct prev_kprobe {
diff --git a/include/asm-m32r/uaccess.h b/include/asm-m32r/uaccess.h
index 0da7c47..e8ae619 100644
--- a/include/asm-m32r/uaccess.h
+++ b/include/asm-m32r/uaccess.h
@@ -328,7 +328,7 @@
" .long 1b,4b\n" \
" .long 2b,4b\n" \
".previous" \
- : "=r"(err) \
+ : "=&r"(err) \
: "r"(x), "r"(addr), "i"(-EFAULT), "0"(err) \
: "r14", "memory")
@@ -353,7 +353,7 @@
" .long 1b,4b\n" \
" .long 2b,4b\n" \
".previous" \
- : "=r"(err) \
+ : "=&r"(err) \
: "r"(x), "r"(addr), "i"(-EFAULT), "0"(err) \
: "r14", "memory")
#else
@@ -398,7 +398,7 @@
" .balign 4\n" \
" .long 1b,3b\n" \
".previous" \
- : "=r"(err) \
+ : "=&r"(err) \
: "r"(x), "r"(addr), "i"(-EFAULT), "0"(err) \
: "r14", "memory")
@@ -442,7 +442,7 @@
" .balign 4\n" \
" .long 1b,3b\n" \
".previous" \
- : "=r"(err), "=&r"(x) \
+ : "=&r"(err), "=&r"(x) \
: "r"(addr), "i"(-EFAULT), "0"(err) \
: "r14", "memory")
diff --git a/include/asm-powerpc/cputable.h b/include/asm-powerpc/cputable.h
index 6421054..90d005b 100644
--- a/include/asm-powerpc/cputable.h
+++ b/include/asm-powerpc/cputable.h
@@ -159,9 +159,11 @@
#endif
/* We need to mark all pages as being coherent if we're SMP or we
- * have a 74[45]x and an MPC107 host bridge.
+ * have a 74[45]x and an MPC107 host bridge. Also 83xx requires
+ * it for PCI "streaming/prefetch" to work properly.
*/
-#if defined(CONFIG_SMP) || defined(CONFIG_MPC10X_BRIDGE)
+#if defined(CONFIG_SMP) || defined(CONFIG_MPC10X_BRIDGE) \
+ || defined(CONFIG_PPC_83xx)
#define CPU_FTR_COMMON CPU_FTR_NEED_COHERENT
#else
#define CPU_FTR_COMMON 0
@@ -277,7 +279,8 @@
CPU_FTRS_G2_LE = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_MAYBE_CAN_DOZE |
CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_HAS_HIGH_BATS,
CPU_FTRS_E300 = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_MAYBE_CAN_DOZE |
- CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_HAS_HIGH_BATS,
+ CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_HAS_HIGH_BATS |
+ CPU_FTR_COMMON,
CPU_FTRS_CLASSIC32 = CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE |
CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE,
CPU_FTRS_POWER3_32 = CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE |
diff --git a/include/asm-powerpc/mmu.h b/include/asm-powerpc/mmu.h
index d096d9e..b0b9a3f 100644
--- a/include/asm-powerpc/mmu.h
+++ b/include/asm-powerpc/mmu.h
@@ -112,6 +112,7 @@
} hpte_t;
extern hpte_t *htab_address;
+extern unsigned long htab_size_bytes;
extern unsigned long htab_hash_mask;
/*
diff --git a/include/asm-powerpc/reg.h b/include/asm-powerpc/reg.h
index 12ecc9b..72bfe3a 100644
--- a/include/asm-powerpc/reg.h
+++ b/include/asm-powerpc/reg.h
@@ -615,27 +615,9 @@
#define proc_trap() asm volatile("trap")
#ifdef CONFIG_PPC64
-static inline void ppc64_runlatch_on(void)
-{
- unsigned long ctrl;
- if (cpu_has_feature(CPU_FTR_CTRL)) {
- ctrl = mfspr(SPRN_CTRLF);
- ctrl |= CTRL_RUNLATCH;
- mtspr(SPRN_CTRLT, ctrl);
- }
-}
-
-static inline void ppc64_runlatch_off(void)
-{
- unsigned long ctrl;
-
- if (cpu_has_feature(CPU_FTR_CTRL)) {
- ctrl = mfspr(SPRN_CTRLF);
- ctrl &= ~CTRL_RUNLATCH;
- mtspr(SPRN_CTRLT, ctrl);
- }
-}
+extern void ppc64_runlatch_on(void);
+extern void ppc64_runlatch_off(void);
extern unsigned long scom970_read(unsigned int address);
extern void scom970_write(unsigned int address, unsigned long value);
@@ -645,15 +627,6 @@
#define __get_SP() ({unsigned long sp; \
asm volatile("mr %0,1": "=r" (sp)); sp;})
-#else /* __ASSEMBLY__ */
-
-#define RUNLATCH_ON(REG) \
-BEGIN_FTR_SECTION \
- mfspr (REG),SPRN_CTRLF; \
- ori (REG),(REG),CTRL_RUNLATCH; \
- mtspr SPRN_CTRLT,(REG); \
-END_FTR_SECTION_IFSET(CPU_FTR_CTRL)
-
#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_REG_H */
diff --git a/include/asm-powerpc/thread_info.h b/include/asm-powerpc/thread_info.h
index c044ec1..237fc2b 100644
--- a/include/asm-powerpc/thread_info.h
+++ b/include/asm-powerpc/thread_info.h
@@ -113,7 +113,7 @@
#define TIF_POLLING_NRFLAG 4 /* true if poll_idle() is polling
TIF_NEED_RESCHED */
#define TIF_32BIT 5 /* 32 bit binary */
-/* #define SPARE 6 */
+#define TIF_RUNLATCH 6 /* Is the runlatch enabled? */
#define TIF_ABI_PENDING 7 /* 32/64 bit switch needed */
#define TIF_SYSCALL_AUDIT 8 /* syscall auditing active */
#define TIF_SINGLESTEP 9 /* singlestepping active */
@@ -131,7 +131,7 @@
#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED)
#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
#define _TIF_32BIT (1<<TIF_32BIT)
-/* #define _SPARE (1<<SPARE) */
+#define _TIF_RUNLATCH (1<<TIF_RUNLATCH)
#define _TIF_ABI_PENDING (1<<TIF_ABI_PENDING)
#define _TIF_SYSCALL_AUDIT (1<<TIF_SYSCALL_AUDIT)
#define _TIF_SINGLESTEP (1<<TIF_SINGLESTEP)
diff --git a/include/asm-sparc64/futex.h b/include/asm-sparc64/futex.h
index 6a332a9..0caf601 100644
--- a/include/asm-sparc64/futex.h
+++ b/include/asm-sparc64/futex.h
@@ -1,6 +1,86 @@
-#ifndef _ASM_FUTEX_H
-#define _ASM_FUTEX_H
+#ifndef _SPARC64_FUTEX_H
+#define _SPARC64_FUTEX_H
-#include <asm-generic/futex.h>
+#include <linux/futex.h>
+#include <asm/errno.h>
+#include <asm/system.h>
+#include <asm/uaccess.h>
-#endif
+#define __futex_cas_op(insn, ret, oldval, uaddr, oparg) \
+ __asm__ __volatile__( \
+ "\n1: lduwa [%3] %%asi, %2\n" \
+ " " insn "\n" \
+ "2: casa [%3] %%asi, %2, %1\n" \
+ " cmp %2, %1\n" \
+ " bne,pn %%icc, 1b\n" \
+ " mov 0, %0\n" \
+ "3:\n" \
+ " .section .fixup,#alloc,#execinstr\n" \
+ " .align 4\n" \
+ "4: ba 3b\n" \
+ " mov %5, %0\n" \
+ " .previous\n" \
+ " .section __ex_table,#alloc\n" \
+ " .align 4\n" \
+ " .word 1b, 4b\n" \
+ " .word 2b, 4b\n" \
+ " .previous\n" \
+ : "=&r" (ret), "=&r" (oldval), "=&r" (tem) \
+ : "r" (uaddr), "r" (oparg), "i" (-EFAULT) \
+ : "memory")
+
+static inline int futex_atomic_op_inuser(int encoded_op, int __user *uaddr)
+{
+ int op = (encoded_op >> 28) & 7;
+ int cmp = (encoded_op >> 24) & 15;
+ int oparg = (encoded_op << 8) >> 20;
+ int cmparg = (encoded_op << 20) >> 20;
+ int oldval = 0, ret, tem;
+
+ if (unlikely(!access_ok(VERIFY_WRITE, uaddr, sizeof(int))))
+ return -EFAULT;
+ if (unlikely((((unsigned long) uaddr) & 0x3UL)))
+ return -EINVAL;
+
+ if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
+ oparg = 1 << oparg;
+
+ inc_preempt_count();
+
+ switch (op) {
+ case FUTEX_OP_SET:
+ __futex_cas_op("mov\t%4, %1", ret, oldval, uaddr, oparg);
+ break;
+ case FUTEX_OP_ADD:
+ __futex_cas_op("add\t%2, %4, %1", ret, oldval, uaddr, oparg);
+ break;
+ case FUTEX_OP_OR:
+ __futex_cas_op("or\t%2, %4, %1", ret, oldval, uaddr, oparg);
+ break;
+ case FUTEX_OP_ANDN:
+ __futex_cas_op("and\t%2, %4, %1", ret, oldval, uaddr, oparg);
+ break;
+ case FUTEX_OP_XOR:
+ __futex_cas_op("xor\t%2, %4, %1", ret, oldval, uaddr, oparg);
+ break;
+ default:
+ ret = -ENOSYS;
+ }
+
+ dec_preempt_count();
+
+ if (!ret) {
+ switch (cmp) {
+ case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break;
+ case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break;
+ case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break;
+ case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break;
+ case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break;
+ case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break;
+ default: ret = -ENOSYS;
+ }
+ }
+ return ret;
+}
+
+#endif /* !(_SPARC64_FUTEX_H) */
diff --git a/include/asm-sparc64/smp.h b/include/asm-sparc64/smp.h
index 110a2de..473edb2 100644
--- a/include/asm-sparc64/smp.h
+++ b/include/asm-sparc64/smp.h
@@ -66,8 +66,14 @@
#define raw_smp_processor_id() (current_thread_info()->cpu)
+extern void smp_setup_cpu_possible_map(void);
+
#endif /* !(__ASSEMBLY__) */
+#else
+
+#define smp_setup_cpu_possible_map() do { } while (0)
+
#endif /* !(CONFIG_SMP) */
#define NO_PROC_ID 0xFF
diff --git a/include/asm-x86_64/acpi.h b/include/asm-x86_64/acpi.h
index aa1c7b2..e2b9923 100644
--- a/include/asm-x86_64/acpi.h
+++ b/include/asm-x86_64/acpi.h
@@ -164,6 +164,20 @@
extern int acpi_skip_timer_override;
+extern int unsync_tsc_on_multicluster;
+
+static inline int acpi_madt_oem_check(char *oem, char *productid)
+{
+ /* Copied from i386. Probably has too many entries. */
+ if (!strncmp(oem, "IBM ENSW", 8) &&
+ (!strncmp(productid, "VIGIL SMP", 9)
+ || !strncmp(productid, "EXA", 3)
+ || !strncmp(productid, "RUTHLESS SMP", 12))) {
+ unsync_tsc_on_multicluster = 1;
+ }
+ return 0;
+}
+
#endif /*__KERNEL__*/
#endif /*_ASM_ACPI_H*/
diff --git a/include/asm-x86_64/pci.h b/include/asm-x86_64/pci.h
index fd03e15..8a05af2 100644
--- a/include/asm-x86_64/pci.h
+++ b/include/asm-x86_64/pci.h
@@ -19,8 +19,6 @@
#endif
#define pcibios_scan_all_fns(a, b) 0
-extern int no_iommu, force_iommu;
-
extern unsigned long pci_mem_start;
#define PCIBIOS_MIN_IO 0x1000
#define PCIBIOS_MIN_MEM (pci_mem_start)
diff --git a/include/asm-x86_64/pgtable.h b/include/asm-x86_64/pgtable.h
index 8fbf4dd..715fd94 100644
--- a/include/asm-x86_64/pgtable.h
+++ b/include/asm-x86_64/pgtable.h
@@ -131,7 +131,7 @@
#define PGDIR_SIZE (1UL << PGDIR_SHIFT)
#define PGDIR_MASK (~(PGDIR_SIZE-1))
-#define USER_PTRS_PER_PGD (TASK_SIZE/PGDIR_SIZE)
+#define USER_PTRS_PER_PGD ((TASK_SIZE-1)/PGDIR_SIZE+1)
#define FIRST_USER_ADDRESS 0
#ifndef __ASSEMBLY__
diff --git a/include/asm-x86_64/proto.h b/include/asm-x86_64/proto.h
index eca3f2d..3ba8fd4 100644
--- a/include/asm-x86_64/proto.h
+++ b/include/asm-x86_64/proto.h
@@ -39,7 +39,6 @@
extern void ia32_syscall(void);
extern void iommu_hole_init(void);
-extern void time_init_gtod(void);
extern int pmtimer_mark_offset(void);
extern void pmtimer_resume(void);
extern void pmtimer_wait(unsigned);
@@ -134,6 +133,7 @@
extern int reboot_force;
extern int notsc_setup(char *);
+extern int setup_additional_cpus(char *);
extern void smp_local_timer_interrupt(struct pt_regs * regs);
diff --git a/include/linux/serial_reg.h b/include/linux/serial_reg.h
index 6a2bb95..3c8a6aa 100644
--- a/include/linux/serial_reg.h
+++ b/include/linux/serial_reg.h
@@ -247,10 +247,10 @@
#define UART_CTR 0xFF
/*
- * The 16C950 Additional Control Reigster
+ * The 16C950 Additional Control Register
*/
#define UART_ACR_RXDIS 0x01 /* Receiver disable */
-#define UART_ACR_TXDIS 0x02 /* Receiver disable */
+#define UART_ACR_TXDIS 0x02 /* Transmitter disable */
#define UART_ACR_DSRFC 0x04 /* DSR Flow Control */
#define UART_ACR_TLENB 0x20 /* 950 trigger levels enable */
#define UART_ACR_ICRRD 0x40 /* ICR Read enable */
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index d73501b..b9ea44a 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -543,7 +543,7 @@
asmlinkage long sys_symlinkat(const char __user * oldname,
int newdfd, const char __user * newname);
asmlinkage long sys_linkat(int olddfd, const char __user *oldname,
- int newdfd, const char __user *newname);
+ int newdfd, const char __user *newname, int flags);
asmlinkage long sys_renameat(int olddfd, const char __user * oldname,
int newdfd, const char __user * newname);
asmlinkage long sys_futimesat(int dfd, char __user *filename,
diff --git a/include/net/xfrm.h b/include/net/xfrm.h
index d6111a2..004e645 100644
--- a/include/net/xfrm.h
+++ b/include/net/xfrm.h
@@ -403,6 +403,11 @@
extern void __xfrm_state_destroy(struct xfrm_state *);
+static inline void __xfrm_state_put(struct xfrm_state *x)
+{
+ atomic_dec(&x->refcnt);
+}
+
static inline void xfrm_state_put(struct xfrm_state *x)
{
if (atomic_dec_and_test(&x->refcnt))
diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index 880831b..67af4ce 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -552,7 +552,7 @@
*/
if ((flags & MPOL_MF_MOVE_ALL) || page_mapcount(page) == 1) {
if (isolate_lru_page(page))
- list_add(&page->lru, pagelist);
+ list_add_tail(&page->lru, pagelist);
}
}
@@ -569,6 +569,7 @@
LIST_HEAD(moved);
LIST_HEAD(failed);
int err = 0;
+ unsigned long offset = 0;
int nr_pages;
struct page *page;
struct list_head *p;
@@ -576,8 +577,21 @@
redo:
nr_pages = 0;
list_for_each(p, pagelist) {
- if (vma)
- page = alloc_page_vma(GFP_HIGHUSER, vma, vma->vm_start);
+ if (vma) {
+ /*
+ * The address passed to alloc_page_vma is used to
+ * generate the proper interleave behavior. We fake
+ * the address here by an increasing offset in order
+ * to get the proper distribution of pages.
+ *
+ * No decision has been made as to which page
+ * a certain old page is moved to so we cannot
+ * specify the correct address.
+ */
+ page = alloc_page_vma(GFP_HIGHUSER, vma,
+ offset + vma->vm_start);
+ offset += PAGE_SIZE;
+ }
else
page = alloc_pages_node(dest, GFP_HIGHUSER, 0);
@@ -585,7 +599,7 @@
err = -ENOMEM;
goto out;
}
- list_add(&page->lru, &newlist);
+ list_add_tail(&page->lru, &newlist);
nr_pages++;
if (nr_pages > MIGRATE_CHUNK_SIZE)
break;
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 1838c15..b0af759 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -1908,7 +1908,12 @@
sc.swap_cluster_max = SWAP_CLUSTER_MAX;
cond_resched();
- p->flags |= PF_MEMALLOC;
+ /*
+ * We need to be able to allocate from the reserves for RECLAIM_SWAP
+ * and we also need to be able to write out pages for RECLAIM_WRITE
+ * and RECLAIM_SWAP.
+ */
+ p->flags |= PF_MEMALLOC | PF_SWAPWRITE;
reclaim_state.reclaimed_slab = 0;
p->reclaim_state = &reclaim_state;
@@ -1932,11 +1937,10 @@
* a long time.
*/
shrink_slab(sc.nr_scanned, gfp_mask, order);
- sc.nr_reclaimed = 1; /* Avoid getting the off node timeout */
}
p->reclaim_state = NULL;
- current->flags &= ~PF_MEMALLOC;
+ current->flags &= ~(PF_MEMALLOC | PF_SWAPWRITE);
if (sc.nr_reclaimed == 0)
zone->last_unsuccessful_zone_reclaim = jiffies;
diff --git a/net/bridge/br_netfilter.c b/net/bridge/br_netfilter.c
index 6bb0c7e..e060aad 100644
--- a/net/bridge/br_netfilter.c
+++ b/net/bridge/br_netfilter.c
@@ -90,6 +90,7 @@
.dev = &__fake_net_device,
.path = &__fake_rtable.u.dst,
.metrics = {[RTAX_MTU - 1] = 1500},
+ .flags = DST_NOXFRM,
}
},
.rt_flags = 0,
diff --git a/net/ethernet/eth.c b/net/ethernet/eth.c
index 9890fd9..c971f14 100644
--- a/net/ethernet/eth.c
+++ b/net/ethernet/eth.c
@@ -95,6 +95,12 @@
saddr = dev->dev_addr;
memcpy(eth->h_source,saddr,dev->addr_len);
+ if(daddr)
+ {
+ memcpy(eth->h_dest,daddr,dev->addr_len);
+ return ETH_HLEN;
+ }
+
/*
* Anyway, the loopback-device should never use this function...
*/
@@ -105,12 +111,6 @@
return ETH_HLEN;
}
- if(daddr)
- {
- memcpy(eth->h_dest,daddr,dev->addr_len);
- return ETH_HLEN;
- }
-
return -ETH_HLEN;
}
diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index d82c242..fca5fe0 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -835,7 +835,7 @@
int r;
rthp = rt_remove_balanced_route(
- &rt_hash_table[i].chain,
+ &rt_hash_table[k].chain,
rth,
&r);
goal -= r;
diff --git a/net/ipv4/xfrm4_policy.c b/net/ipv4/xfrm4_policy.c
index 45f7ae5..f285bbf 100644
--- a/net/ipv4/xfrm4_policy.c
+++ b/net/ipv4/xfrm4_policy.c
@@ -35,6 +35,7 @@
if (xdst->u.rt.fl.oif == fl->oif && /*XXX*/
xdst->u.rt.fl.fl4_dst == fl->fl4_dst &&
xdst->u.rt.fl.fl4_src == fl->fl4_src &&
+ xdst->u.rt.fl.fl4_tos == fl->fl4_tos &&
xfrm_bundle_ok(xdst, fl, AF_INET)) {
dst_clone(dst);
break;
@@ -61,7 +62,8 @@
.nl_u = {
.ip4_u = {
.saddr = local,
- .daddr = remote
+ .daddr = remote,
+ .tos = fl->fl4_tos
}
}
};
@@ -230,6 +232,7 @@
fl->proto = iph->protocol;
fl->fl4_dst = iph->daddr;
fl->fl4_src = iph->saddr;
+ fl->fl4_tos = iph->tos;
}
static inline int xfrm4_garbage_collect(void)
diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c
index efa3e72..f999edd 100644
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -494,6 +494,7 @@
struct net_device *dev;
struct sk_buff *frag;
struct rt6_info *rt = (struct rt6_info*)skb->dst;
+ struct ipv6_pinfo *np = skb->sk ? inet6_sk(skb->sk) : NULL;
struct ipv6hdr *tmp_hdr;
struct frag_hdr *fh;
unsigned int mtu, hlen, left, len;
@@ -505,7 +506,12 @@
hlen = ip6_find_1stfragopt(skb, &prevhdr);
nexthdr = *prevhdr;
- mtu = dst_mtu(&rt->u.dst) - hlen - sizeof(struct frag_hdr);
+ mtu = dst_mtu(&rt->u.dst);
+ if (np && np->frag_size < mtu) {
+ if (np->frag_size)
+ mtu = np->frag_size;
+ }
+ mtu -= hlen + sizeof(struct frag_hdr);
if (skb_shinfo(skb)->frag_list) {
int first_len = skb_pagelen(skb);
@@ -882,7 +888,12 @@
inet->cork.fl = *fl;
np->cork.hop_limit = hlimit;
np->cork.tclass = tclass;
- inet->cork.fragsize = mtu = dst_mtu(rt->u.dst.path);
+ mtu = dst_mtu(rt->u.dst.path);
+ if (np && np->frag_size < mtu) {
+ if (np->frag_size)
+ mtu = np->frag_size;
+ }
+ inet->cork.fragsize = mtu;
if (dst_allfrag(rt->u.dst.path))
inet->cork.flags |= IPCORK_ALLFRAG;
inet->cork.length = 0;
diff --git a/net/ipv6/ip6_tunnel.c b/net/ipv6/ip6_tunnel.c
index faea8a1..4859753 100644
--- a/net/ipv6/ip6_tunnel.c
+++ b/net/ipv6/ip6_tunnel.c
@@ -884,6 +884,7 @@
t->parms.encap_limit = p->encap_limit;
t->parms.flowinfo = p->flowinfo;
t->parms.link = p->link;
+ ip6_tnl_dst_reset(t);
ip6ip6_tnl_link_config(t);
return 0;
}
diff --git a/net/key/af_key.c b/net/key/af_key.c
index ae86d23..b2d4d1d 100644
--- a/net/key/af_key.c
+++ b/net/key/af_key.c
@@ -1423,7 +1423,7 @@
if (err < 0) {
x->km.state = XFRM_STATE_DEAD;
- xfrm_state_put(x);
+ __xfrm_state_put(x);
goto out;
}
diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c
index 5e6b05a..8206025 100644
--- a/net/xfrm/xfrm_policy.c
+++ b/net/xfrm/xfrm_policy.c
@@ -782,7 +782,7 @@
int nx = 0;
int err;
u32 genid;
- u16 family = dst_orig->ops->family;
+ u16 family;
u8 dir = policy_to_flow_dir(XFRM_POLICY_OUT);
u32 sk_sid = security_sk_sid(sk, fl, dir);
restart:
@@ -796,13 +796,14 @@
if ((dst_orig->flags & DST_NOXFRM) || !xfrm_policy_list[XFRM_POLICY_OUT])
return 0;
- policy = flow_cache_lookup(fl, sk_sid, family, dir,
- xfrm_policy_lookup);
+ policy = flow_cache_lookup(fl, sk_sid, dst_orig->ops->family,
+ dir, xfrm_policy_lookup);
}
if (!policy)
return 0;
+ family = dst_orig->ops->family;
policy->curlft.use_time = (unsigned long)xtime.tv_sec;
switch (policy->action) {
diff --git a/net/xfrm/xfrm_state.c b/net/xfrm/xfrm_state.c
index e12d0be..c656cba 100644
--- a/net/xfrm/xfrm_state.c
+++ b/net/xfrm/xfrm_state.c
@@ -220,14 +220,14 @@
x->km.state = XFRM_STATE_DEAD;
spin_lock(&xfrm_state_lock);
list_del(&x->bydst);
- atomic_dec(&x->refcnt);
+ __xfrm_state_put(x);
if (x->id.spi) {
list_del(&x->byspi);
- atomic_dec(&x->refcnt);
+ __xfrm_state_put(x);
}
spin_unlock(&xfrm_state_lock);
if (del_timer(&x->timer))
- atomic_dec(&x->refcnt);
+ __xfrm_state_put(x);
/* The number two in this test is the reference
* mentioned in the comment below plus the reference
@@ -243,7 +243,7 @@
* The xfrm_state_alloc call gives a reference, and that
* is what we are dropping here.
*/
- atomic_dec(&x->refcnt);
+ __xfrm_state_put(x);
err = 0;
}
diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c
index ac87a09..7de1755 100644
--- a/net/xfrm/xfrm_user.c
+++ b/net/xfrm/xfrm_user.c
@@ -345,7 +345,7 @@
if (err < 0) {
x->km.state = XFRM_STATE_DEAD;
- xfrm_state_put(x);
+ __xfrm_state_put(x);
goto out;
}
diff --git a/sound/drivers/opl3/opl3_oss.c b/sound/drivers/opl3/opl3_oss.c
index 31f1f2e..0345ae6 100644
--- a/sound/drivers/opl3/opl3_oss.c
+++ b/sound/drivers/opl3/opl3_oss.c
@@ -146,7 +146,7 @@
void snd_opl3_free_seq_oss(struct snd_opl3 *opl3)
{
if (opl3->oss_seq_dev) {
- snd_device_free(opl3->card, opl3->oss_seq_dev);
+ /* The instance should have been released in prior */
opl3->oss_seq_dev = NULL;
}
}
diff --git a/sound/isa/cs423x/cs4236.c b/sound/isa/cs423x/cs4236.c
index 4fa4310..99a4213 100644
--- a/sound/isa/cs423x/cs4236.c
+++ b/sound/isa/cs423x/cs4236.c
@@ -414,7 +414,7 @@
}
/* MPU initialization */
if (acard->mpu && mpu_port[dev] > 0) {
- if (snd_cs423x_pnp_init_mpu(dev, acard->ctrl, cfg) < 0)
+ if (snd_cs423x_pnp_init_mpu(dev, acard->mpu, cfg) < 0)
goto error;
}
kfree(cfg);
