net: Move && and || to end of previous line
Not including net/atm/
Compiled tested x86 allyesconfig only
Added a > 80 column line or two, which I ignored.
Existing checkpatch plaints willfully, cheerfully ignored.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/net/mac80211/agg-rx.c b/net/mac80211/agg-rx.c
index 7ed5fe6..614c65d 100644
--- a/net/mac80211/agg-rx.c
+++ b/net/mac80211/agg-rx.c
@@ -211,9 +211,9 @@
* check if configuration can support the BA policy
* and if buffer size does not exceeds max value */
/* XXX: check own ht delayed BA capability?? */
- if (((ba_policy != 1)
- && (!(sta->sta.ht_cap.cap & IEEE80211_HT_CAP_DELAY_BA)))
- || (buf_size > IEEE80211_MAX_AMPDU_BUF)) {
+ if (((ba_policy != 1) &&
+ (!(sta->sta.ht_cap.cap & IEEE80211_HT_CAP_DELAY_BA))) ||
+ (buf_size > IEEE80211_MAX_AMPDU_BUF)) {
status = WLAN_STATUS_INVALID_QOS_PARAM;
#ifdef CONFIG_MAC80211_HT_DEBUG
if (net_ratelimit())
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index dd8ec8d..8116d1a 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -631,8 +631,8 @@
sta_info_stop(local);
rate_control_deinitialize(local);
- if (skb_queue_len(&local->skb_queue)
- || skb_queue_len(&local->skb_queue_unreliable))
+ if (skb_queue_len(&local->skb_queue) ||
+ skb_queue_len(&local->skb_queue_unreliable))
printk(KERN_WARNING "%s: skb_queue not empty\n",
wiphy_name(local->hw.wiphy));
skb_queue_purge(&local->skb_queue);
diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index 51adb11..c0fe464 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -195,8 +195,8 @@
list_del(&p->list);
kmem_cache_free(rm_cache, p);
--entries;
- } else if ((seqnum == p->seqnum)
- && (memcmp(sa, p->sa, ETH_ALEN) == 0))
+ } else if ((seqnum == p->seqnum) &&
+ (memcmp(sa, p->sa, ETH_ALEN) == 0))
return -1;
}
diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c
index 9aecf02..833b2f3 100644
--- a/net/mac80211/mesh_hwmp.c
+++ b/net/mac80211/mesh_hwmp.c
@@ -936,17 +936,16 @@
}
if (mpath->flags & MESH_PATH_ACTIVE) {
- if (time_after(jiffies, mpath->exp_time +
- msecs_to_jiffies(sdata->u.mesh.mshcfg.path_refresh_time))
- && !memcmp(sdata->dev->dev_addr, hdr->addr4,
- ETH_ALEN)
- && !(mpath->flags & MESH_PATH_RESOLVING)
- && !(mpath->flags & MESH_PATH_FIXED)) {
+ if (time_after(jiffies,
+ mpath->exp_time +
+ msecs_to_jiffies(sdata->u.mesh.mshcfg.path_refresh_time)) &&
+ !memcmp(sdata->dev->dev_addr, hdr->addr4, ETH_ALEN) &&
+ !(mpath->flags & MESH_PATH_RESOLVING) &&
+ !(mpath->flags & MESH_PATH_FIXED)) {
mesh_queue_preq(mpath,
PREQ_Q_F_START | PREQ_Q_F_REFRESH);
}
- memcpy(hdr->addr1, mpath->next_hop->sta.addr,
- ETH_ALEN);
+ memcpy(hdr->addr1, mpath->next_hop->sta.addr, ETH_ALEN);
} else {
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
if (!(mpath->flags & MESH_PATH_RESOLVING)) {
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 96f13ad0..beecf50 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -1168,8 +1168,8 @@
rx->key))
return -EACCES;
/* BIP does not use Protected field, so need to check MMIE */
- if (unlikely(ieee80211_is_multicast_robust_mgmt_frame(rx->skb)
- && ieee80211_get_mmie_keyidx(rx->skb) < 0 &&
+ if (unlikely(ieee80211_is_multicast_robust_mgmt_frame(rx->skb) &&
+ ieee80211_get_mmie_keyidx(rx->skb) < 0 &&
rx->key))
return -EACCES;
/*
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 943def2..8834cc9 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -366,10 +366,11 @@
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data;
u32 staflags;
- if (unlikely(!sta || ieee80211_is_probe_resp(hdr->frame_control)
- || ieee80211_is_auth(hdr->frame_control)
- || ieee80211_is_assoc_resp(hdr->frame_control)
- || ieee80211_is_reassoc_resp(hdr->frame_control)))
+ if (unlikely(!sta ||
+ ieee80211_is_probe_resp(hdr->frame_control) ||
+ ieee80211_is_auth(hdr->frame_control) ||
+ ieee80211_is_assoc_resp(hdr->frame_control) ||
+ ieee80211_is_reassoc_resp(hdr->frame_control)))
return TX_CONTINUE;
staflags = get_sta_flags(sta);
