blob: 19afdbd7d0a77c8f5511cf2de616d24c5259dbae [file] [log] [blame]
/*
* tsc_msr.c - TSC frequency enumeration via MSR
*
* Copyright (C) 2013 Intel Corporation
* Author: Bin Gao <bin.gao@intel.com>
*
* This file is released under the GPLv2.
*/
#include <linux/kernel.h>
#include <asm/processor.h>
#include <asm/setup.h>
#include <asm/apic.h>
#include <asm/param.h>
#define MAX_NUM_FREQS 9
/*
* If MSR_PERF_STAT[31] is set, the maximum resolved bus ratio can be
* read in MSR_PLATFORM_ID[12:8], otherwise in MSR_PERF_STAT[44:40].
* Unfortunately some Intel Atom SoCs aren't quite compliant to this,
* so we need manually differentiate SoC families. This is what the
* field msr_plat does.
*/
struct freq_desc {
u8 x86_family; /* CPU family */
u8 x86_model; /* model */
u8 msr_plat; /* 1: use MSR_PLATFORM_INFO, 0: MSR_IA32_PERF_STATUS */
u32 freqs[MAX_NUM_FREQS];
};
static struct freq_desc freq_desc_tables[] = {
/* PNW */
{ 6, 0x27, 0, { 0, 0, 0, 0, 0, 99840, 0, 83200 } },
/* CLV+ */
{ 6, 0x35, 0, { 0, 133200, 0, 0, 0, 99840, 0, 83200 } },
/* TNG - Intel Atom processor Z3400 series */
{ 6, 0x4a, 1, { 0, 100000, 133300, 0, 0, 0, 0, 0 } },
/* VLV2 - Intel Atom processor E3000, Z3600, Z3700 series */
{ 6, 0x37, 1, { 83300, 100000, 133300, 116700, 80000, 0, 0, 0 } },
/* ANN - Intel Atom processor Z3500 series */
{ 6, 0x5a, 1, { 83300, 100000, 133300, 100000, 0, 0, 0, 0 } },
/* AMT - Intel Atom processor X7-Z8000 and X5-Z8000 series */
{ 6, 0x4c, 1, { 83300, 100000, 133300, 116700,
80000, 93300, 90000, 88900, 87500 } },
};
static int match_cpu(u8 family, u8 model)
{
int i;
for (i = 0; i < ARRAY_SIZE(freq_desc_tables); i++) {
if ((family == freq_desc_tables[i].x86_family) &&
(model == freq_desc_tables[i].x86_model))
return i;
}
return -1;
}
/* Map CPU reference clock freq ID(0-7) to CPU reference clock freq(KHz) */
#define id_to_freq(cpu_index, freq_id) \
(freq_desc_tables[cpu_index].freqs[freq_id])
/*
* MSR-based CPU/TSC frequency discovery for certain CPUs.
*
* Set global "lapic_timer_frequency" to bus_clock_cycles/jiffy
* Return processor base frequency in KHz, or 0 on failure.
*/
unsigned long cpu_khz_from_msr(void)
{
u32 lo, hi, ratio, freq_id, freq;
unsigned long res;
int cpu_index;
if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL)
return 0;
cpu_index = match_cpu(boot_cpu_data.x86, boot_cpu_data.x86_model);
if (cpu_index < 0)
return 0;
if (freq_desc_tables[cpu_index].msr_plat) {
rdmsr(MSR_PLATFORM_INFO, lo, hi);
ratio = (lo >> 8) & 0xff;
} else {
rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
ratio = (hi >> 8) & 0x1f;
}
/* Get FSB FREQ ID */
rdmsr(MSR_FSB_FREQ, lo, hi);
freq_id = lo & 0x7;
freq = id_to_freq(cpu_index, freq_id);
/* TSC frequency = maximum resolved freq * maximum resolved bus ratio */
res = freq * ratio;
#ifdef CONFIG_X86_LOCAL_APIC
lapic_timer_frequency = (freq * 1000) / HZ;
#endif
/*
* TSC frequency determined by MSR is always considered "known"
* because it is reported by HW.
* Another fact is that on MSR capable platforms, PIT/HPET is
* generally not available so calibration won't work at all.
*/
setup_force_cpu_cap(X86_FEATURE_TSC_KNOWN_FREQ);
/*
* Unfortunately there is no way for hardware to tell whether the
* TSC is reliable. We were told by silicon design team that TSC
* on Atom SoCs are always "reliable". TSC is also the only
* reliable clocksource on these SoCs (HPET is either not present
* or not functional) so mark TSC reliable which removes the
* requirement for a watchdog clocksource.
*/
setup_force_cpu_cap(X86_FEATURE_TSC_RELIABLE);
return res;
}