Merge branches 'pcmcia-config-loop' and 'pcmcia-printk' into pcmcia
* pcmcia-config-loop:
pcmcia: pcmcia_config_loop() improvement by passing vcc
pcmcia: pcmcia_config_loop() default CIS entry handling
pcmcia: pcmcia_config_loop() ConfigIndex unification
pcmcia: use pcmcia_loop_config in misc pcmcia drivers
pcmcia: use pcmcia_loop_config in net pcmcia drivers
pcmcia: use pcmcia_loop_config in ISDN pcmcia drivers
pcmcia: use pcmcia_loop_config in scsi pcmcia drivers
pcmcia: use pcmcia_loop_config in bluetooth drivers
pcmcia: use pcmcia_loop_config in pata and ide drivers
pcmcia: add pcmcia_loop_config() helper
* pcmcia-printk:
pcmcia: don't add extra DEBUG cflag
pcmcia: remove unused cs_socket_name() definition
pcmcia: use dev_printk in module rsrc_nonstatic
pcmcia: use dev_printk in module pcmcia
pcmcia: use dev_printk in module pcmcia_core
pcmcia: use dev_printk and dev_dbg in yenta_socket
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index 6e4d31d..02b596b 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -365,6 +365,7 @@
PCMCIA_DEVICE_MANF_CARD(0x0032, 0x0704),
PCMCIA_DEVICE_MANF_CARD(0x0032, 0x2904),
PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401), /* SanDisk CFA */
+ PCMCIA_DEVICE_MANF_CARD(0x004f, 0x0000), /* Kingston */
PCMCIA_DEVICE_MANF_CARD(0x0097, 0x1620), /* TI emulated */
PCMCIA_DEVICE_MANF_CARD(0x0098, 0x0000), /* Toshiba */
PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x002d),
@@ -385,9 +386,9 @@
PCMCIA_DEVICE_PROD_ID12("EXP ", "CD-ROM", 0x0a5c52fd, 0x66536591),
PCMCIA_DEVICE_PROD_ID12("EXP ", "PnPIDE", 0x0a5c52fd, 0x0c694728),
PCMCIA_DEVICE_PROD_ID12("FREECOM", "PCCARD-IDE", 0x5714cbf7, 0x48e0ab8e),
- PCMCIA_DEVICE_PROD_ID12("Hyperstone", "Model1", 0x3d5b9ef5, 0xca6ab420),
PCMCIA_DEVICE_PROD_ID12("HITACHI", "FLASH", 0xf4f43949, 0x9eb86aae),
PCMCIA_DEVICE_PROD_ID12("HITACHI", "microdrive", 0xf4f43949, 0xa6d76178),
+ PCMCIA_DEVICE_PROD_ID12("Hyperstone", "Model1", 0x3d5b9ef5, 0xca6ab420),
PCMCIA_DEVICE_PROD_ID12("IBM", "microdrive", 0xb569a6e5, 0xa6d76178),
PCMCIA_DEVICE_PROD_ID12("IBM", "IBM17JSSFP20", 0xb569a6e5, 0xf2508753),
PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF8GB", 0x2e6d1829, 0xacbe682e),
diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c
index 6472cd8..fe20cdb 100644
--- a/drivers/ide/legacy/ide-cs.c
+++ b/drivers/ide/legacy/ide-cs.c
@@ -392,8 +392,10 @@
PCMCIA_DEVICE_MANF_CARD(0x000a, 0x0000), /* I-O Data CFA */
PCMCIA_DEVICE_MANF_CARD(0x001c, 0x0001), /* Mitsubishi CFA */
PCMCIA_DEVICE_MANF_CARD(0x0032, 0x0704),
+ PCMCIA_DEVICE_MANF_CARD(0x0032, 0x2904),
PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401), /* SanDisk CFA */
PCMCIA_DEVICE_MANF_CARD(0x004f, 0x0000), /* Kingston */
+ PCMCIA_DEVICE_MANF_CARD(0x0097, 0x1620), /* TI emulated */
PCMCIA_DEVICE_MANF_CARD(0x0098, 0x0000), /* Toshiba */
PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x002d),
PCMCIA_DEVICE_MANF_CARD(0x00ce, 0x0000), /* Samsung */
diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
index 269a9e9..2ea5d46 100644
--- a/drivers/pcmcia/Makefile
+++ b/drivers/pcmcia/Makefile
@@ -2,10 +2,6 @@
# Makefile for the kernel pcmcia subsystem (c/o David Hinds)
#
-ifeq ($(CONFIG_PCMCIA_DEBUG),y)
-EXTRA_CFLAGS += -DDEBUG
-endif
-
pcmcia_core-y += cs.o cistpl.o rsrc_mgr.o socket_sysfs.o
pcmcia_core-$(CONFIG_CARDBUS) += cardbus.o
obj-$(CONFIG_PCCARD) += pcmcia_core.o
diff --git a/drivers/pcmcia/cistpl.c b/drivers/pcmcia/cistpl.c
index 65129b5..fe789e0 100644
--- a/drivers/pcmcia/cistpl.c
+++ b/drivers/pcmcia/cistpl.c
@@ -92,7 +92,8 @@
if (!(s->features & SS_CAP_STATIC_MAP) && (mem->res == NULL)) {
mem->res = pcmcia_find_mem_region(0, s->map_size, s->map_size, 0, s);
if (mem->res == NULL) {
- printk(KERN_NOTICE "cs: unable to map card memory!\n");
+ dev_printk(KERN_NOTICE, &s->dev,
+ "cs: unable to map card memory!\n");
return NULL;
}
s->cis_virt = NULL;
@@ -265,13 +266,13 @@
======================================================================*/
static void read_cis_cache(struct pcmcia_socket *s, int attr, u_int addr,
- u_int len, void *ptr)
+ size_t len, void *ptr)
{
struct cis_cache_entry *cis;
int ret;
if (s->fake_cis) {
- if (s->fake_cis_len > addr+len)
+ if (s->fake_cis_len >= addr+len)
memcpy(ptr, s->fake_cis+addr, len);
else
memset(ptr, 0xff, len);
@@ -380,17 +381,17 @@
======================================================================*/
-int pcmcia_replace_cis(struct pcmcia_socket *s, cisdump_t *cis)
+int pcmcia_replace_cis(struct pcmcia_socket *s,
+ const u8 *data, const size_t len)
{
- kfree(s->fake_cis);
- s->fake_cis = NULL;
- if (cis->Length > CISTPL_MAX_CIS_SIZE)
+ if (len > CISTPL_MAX_CIS_SIZE)
return CS_BAD_SIZE;
- s->fake_cis = kmalloc(cis->Length, GFP_KERNEL);
+ kfree(s->fake_cis);
+ s->fake_cis = kmalloc(len, GFP_KERNEL);
if (s->fake_cis == NULL)
return CS_OUT_OF_RESOURCE;
- s->fake_cis_len = cis->Length;
- memcpy(s->fake_cis, cis->Data, cis->Length);
+ s->fake_cis_len = len;
+ memcpy(s->fake_cis, data, len);
return CS_SUCCESS;
}
EXPORT_SYMBOL(pcmcia_replace_cis);
diff --git a/drivers/pcmcia/cs.c b/drivers/pcmcia/cs.c
index d120739..ccdbbe49 100644
--- a/drivers/pcmcia/cs.c
+++ b/drivers/pcmcia/cs.c
@@ -61,7 +61,7 @@
/* Access speed for attribute memory windows */
INT_MODULE_PARM(cis_speed, 300); /* ns */
-#ifdef DEBUG
+#ifdef CONFIG_PCMCIA_DEBUG
static int pc_debug;
module_param(pc_debug, int, 0644);
@@ -247,7 +247,8 @@
wait_for_completion(&socket->thread_done);
if (!socket->thread) {
- printk(KERN_WARNING "PCMCIA: warning: socket thread for socket %p did not start\n", socket);
+ dev_printk(KERN_WARNING, &socket->dev,
+ "PCMCIA: warning: socket thread did not start\n");
return -EIO;
}
@@ -412,7 +413,8 @@
s->ops->get_status(s, &status);
if (status & SS_POWERON) {
- printk(KERN_ERR "PCMCIA: socket %p: *** DANGER *** unable to remove socket power\n", s);
+ dev_printk(KERN_ERR, &s->dev,
+ "*** DANGER *** unable to remove socket power\n");
}
cs_socket_put(s);
@@ -508,9 +510,10 @@
if (ret == CS_SUCCESS) {
skt->state |= SOCKET_PRESENT;
- printk(KERN_NOTICE "pccard: %s card inserted into slot %d\n",
- (skt->state & SOCKET_CARDBUS) ? "CardBus" : "PCMCIA",
- skt->sock);
+ dev_printk(KERN_NOTICE, &skt->dev,
+ "pccard: %s card inserted into slot %d\n",
+ (skt->state & SOCKET_CARDBUS) ? "CardBus" : "PCMCIA",
+ skt->sock);
#ifdef CONFIG_CARDBUS
if (skt->state & SOCKET_CARDBUS) {
@@ -595,7 +598,8 @@
static void socket_remove(struct pcmcia_socket *skt)
{
- printk(KERN_NOTICE "pccard: card ejected from slot %d\n", skt->sock);
+ dev_printk(KERN_NOTICE, &skt->dev,
+ "pccard: card ejected from slot %d\n", skt->sock);
socket_shutdown(skt);
}
@@ -641,8 +645,8 @@
/* register with the device core */
ret = device_register(&skt->dev);
if (ret) {
- printk(KERN_WARNING "PCMCIA: unable to register socket 0x%p\n",
- skt);
+ dev_printk(KERN_WARNING, &skt->dev,
+ "PCMCIA: unable to register socket\n");
skt->thread = NULL;
complete(&skt->thread_done);
return 0;
diff --git a/drivers/pcmcia/cs_internal.h b/drivers/pcmcia/cs_internal.h
index 63dc1a2..481a823 100644
--- a/drivers/pcmcia/cs_internal.h
+++ b/drivers/pcmcia/cs_internal.h
@@ -130,15 +130,13 @@
int pccard_register_pcmcia(struct pcmcia_socket *s, struct pcmcia_callback *c);
-#define cs_socket_name(skt) ((skt)->dev.bus_id)
-
-#ifdef DEBUG
+#ifdef CONFIG_PCMCIA_DEBUG
extern int cs_debug_level(int);
#define cs_dbg(skt, lvl, fmt, arg...) do { \
if (cs_debug_level(lvl)) \
- printk(KERN_DEBUG "cs: %s: " fmt, \
- cs_socket_name(skt) , ## arg); \
+ dev_printk(KERN_DEBUG, &skt->dev, \
+ "cs: " fmt, ## arg); \
} while (0)
#else
@@ -146,6 +144,6 @@
#endif
#define cs_err(skt, fmt, arg...) \
- printk(KERN_ERR "cs: %s: " fmt, (skt)->dev.bus_id , ## arg)
+ dev_printk(KERN_ERR, &skt->dev, "cs: " fmt, ## arg)
#endif /* _LINUX_CS_INTERNAL_H */
diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c
index 4174d96..a393501 100644
--- a/drivers/pcmcia/ds.c
+++ b/drivers/pcmcia/ds.c
@@ -42,17 +42,22 @@
MODULE_DESCRIPTION("PCMCIA Driver Services");
MODULE_LICENSE("GPL");
-#ifdef DEBUG
+#ifdef CONFIG_PCMCIA_DEBUG
int ds_pc_debug;
module_param_named(pc_debug, ds_pc_debug, int, 0644);
#define ds_dbg(lvl, fmt, arg...) do { \
- if (ds_pc_debug > (lvl)) \
+ if (ds_pc_debug > (lvl)) \
printk(KERN_DEBUG "ds: " fmt , ## arg); \
} while (0)
+#define ds_dev_dbg(lvl, dev, fmt, arg...) do { \
+ if (ds_pc_debug > (lvl)) \
+ dev_printk(KERN_DEBUG, dev, "ds: " fmt , ## arg); \
+} while (0)
#else
#define ds_dbg(lvl, fmt, arg...) do { } while (0)
+#define ds_dev_dbg(lvl, dev, fmt, arg...) do { } while (0)
#endif
spinlock_t pcmcia_dev_list_lock;
@@ -391,7 +396,7 @@
static void pcmcia_release_dev(struct device *dev)
{
struct pcmcia_device *p_dev = to_pcmcia_dev(dev);
- ds_dbg(1, "releasing device %s\n", p_dev->dev.bus_id);
+ ds_dev_dbg(1, dev, "releasing device\n");
pcmcia_put_socket(p_dev->socket);
kfree(p_dev->devname);
kref_put(&p_dev->function_config->ref, pcmcia_release_function);
@@ -401,7 +406,7 @@
static void pcmcia_add_device_later(struct pcmcia_socket *s, int mfc)
{
if (!s->pcmcia_state.device_add_pending) {
- ds_dbg(1, "scheduling to add %s secondary"
+ ds_dev_dbg(1, &s->dev, "scheduling to add %s secondary"
" device to %d\n", mfc ? "mfc" : "pfc", s->sock);
s->pcmcia_state.device_add_pending = 1;
s->pcmcia_state.mfc_pfc = mfc;
@@ -427,8 +432,7 @@
p_drv = to_pcmcia_drv(dev->driver);
s = p_dev->socket;
- ds_dbg(1, "trying to bind %s to %s\n", p_dev->dev.bus_id,
- p_drv->drv.name);
+ ds_dev_dbg(1, dev, "trying to bind to %s\n", p_drv->drv.name);
if ((!p_drv->probe) || (!p_dev->function_config) ||
(!try_module_get(p_drv->owner))) {
@@ -443,15 +447,16 @@
p_dev->conf.ConfigBase = cis_config.base;
p_dev->conf.Present = cis_config.rmask[0];
} else {
- printk(KERN_INFO "pcmcia: could not parse base and rmask0 of CIS\n");
+ dev_printk(KERN_INFO, dev,
+ "pcmcia: could not parse base and rmask0 of CIS\n");
p_dev->conf.ConfigBase = 0;
p_dev->conf.Present = 0;
}
ret = p_drv->probe(p_dev);
if (ret) {
- ds_dbg(1, "binding %s to %s failed with %d\n",
- p_dev->dev.bus_id, p_drv->drv.name, ret);
+ ds_dev_dbg(1, dev, "binding to %s failed with %d\n",
+ p_drv->drv.name, ret);
goto put_module;
}
@@ -485,8 +490,9 @@
struct pcmcia_device *tmp;
unsigned long flags;
- ds_dbg(2, "pcmcia_card_remove(%d) %s\n", s->sock,
- leftover ? leftover->devname : "");
+ ds_dev_dbg(2, leftover ? &leftover->dev : &s->dev,
+ "pcmcia_card_remove(%d) %s\n", s->sock,
+ leftover ? leftover->devname : "");
if (!leftover)
s->device_count = 0;
@@ -503,7 +509,7 @@
p_dev->_removed=1;
spin_unlock_irqrestore(&pcmcia_dev_list_lock, flags);
- ds_dbg(2, "unregistering device %s\n", p_dev->dev.bus_id);
+ ds_dev_dbg(2, &p_dev->dev, "unregistering device\n");
device_unregister(&p_dev->dev);
}
@@ -520,7 +526,7 @@
p_dev = to_pcmcia_dev(dev);
p_drv = to_pcmcia_drv(dev->driver);
- ds_dbg(1, "removing device %s\n", p_dev->dev.bus_id);
+ ds_dev_dbg(1, dev, "removing device\n");
/* If we're removing the primary module driving a
* pseudo multi-function card, we need to unbind
@@ -543,13 +549,15 @@
/* check for proper unloading */
if (p_dev->_irq || p_dev->_io || p_dev->_locked)
- printk(KERN_INFO "pcmcia: driver %s did not release config properly\n",
- p_drv->drv.name);
+ dev_printk(KERN_INFO, dev,
+ "pcmcia: driver %s did not release config properly\n",
+ p_drv->drv.name);
for (i = 0; i < MAX_WIN; i++)
if (p_dev->_win & CLIENT_WIN_REQ(i))
- printk(KERN_INFO "pcmcia: driver %s did not release windows properly\n",
- p_drv->drv.name);
+ dev_printk(KERN_INFO, dev,
+ "pcmcia: driver %s did not release window properly\n",
+ p_drv->drv.name);
/* references from pcmcia_probe_device */
pcmcia_put_dev(p_dev);
@@ -598,8 +606,9 @@
}
if (!pccard_read_tuple(p_dev->socket, p_dev->func,
CISTPL_DEVICE_GEO, devgeo)) {
- ds_dbg(0, "mem device geometry probably means "
- "FUNCID_MEMORY\n");
+ ds_dev_dbg(0, &p_dev->dev,
+ "mem device geometry probably means "
+ "FUNCID_MEMORY\n");
p_dev->func_id = CISTPL_FUNCID_MEMORY;
p_dev->has_func_id = 1;
}
@@ -680,7 +689,7 @@
if (!p_dev->devname)
goto err_free;
sprintf (p_dev->devname, "pcmcia%s", p_dev->dev.bus_id);
- ds_dbg(3, "devname is %s\n", p_dev->devname);
+ ds_dev_dbg(3, &p_dev->dev, "devname is %s\n", p_dev->devname);
spin_lock_irqsave(&pcmcia_dev_list_lock, flags);
@@ -701,7 +710,7 @@
spin_unlock_irqrestore(&pcmcia_dev_list_lock, flags);
if (!p_dev->function_config) {
- ds_dbg(3, "creating config_t for %s\n", p_dev->dev.bus_id);
+ ds_dev_dbg(3, &p_dev->dev, "creating config_t\n");
p_dev->function_config = kzalloc(sizeof(struct config_t),
GFP_KERNEL);
if (!p_dev->function_config)
@@ -709,8 +718,9 @@
kref_init(&p_dev->function_config->ref);
}
- printk(KERN_NOTICE "pcmcia: registering new device %s\n",
- p_dev->devname);
+ dev_printk(KERN_NOTICE, &p_dev->dev,
+ "pcmcia: registering new device %s\n",
+ p_dev->devname);
pcmcia_device_query(p_dev);
@@ -745,19 +755,20 @@
int ret = 0;
if (!(s->resource_setup_done)) {
- ds_dbg(3, "no resources available, delaying card_add\n");
+ ds_dev_dbg(3, &s->dev,
+ "no resources available, delaying card_add\n");
return -EAGAIN; /* try again, but later... */
}
if (pcmcia_validate_mem(s)) {
- ds_dbg(3, "validating mem resources failed, "
+ ds_dev_dbg(3, &s->dev, "validating mem resources failed, "
"delaying card_add\n");
return -EAGAIN; /* try again, but later... */
}
ret = pccard_validate_cis(s, BIND_FN_ALL, &no_chains);
if (ret || !no_chains) {
- ds_dbg(0, "invalid CIS or invalid resources\n");
+ ds_dev_dbg(0, &s->dev, "invalid CIS or invalid resources\n");
return -ENODEV;
}
@@ -778,7 +789,7 @@
{
struct pcmcia_socket *s =
container_of(work, struct pcmcia_socket, device_add);
- ds_dbg(1, "adding additional device to %d\n", s->sock);
+ ds_dev_dbg(1, &s->dev, "adding additional device to %d\n", s->sock);
pcmcia_device_add(s, s->pcmcia_state.mfc_pfc);
s->pcmcia_state.device_add_pending = 0;
s->pcmcia_state.mfc_pfc = 0;
@@ -788,8 +799,7 @@
{
struct pcmcia_device *p_dev = to_pcmcia_dev(dev);
if (!p_dev->dev.driver) {
- ds_dbg(1, "update device information for %s\n",
- p_dev->dev.bus_id);
+ ds_dev_dbg(1, dev, "update device information\n");
pcmcia_device_query(p_dev);
}
@@ -803,7 +813,7 @@
unsigned long flags;
/* must be called with skt_mutex held */
- ds_dbg(0, "re-scanning socket %d\n", skt->sock);
+ ds_dev_dbg(0, &skt->dev, "re-scanning socket %d\n", skt->sock);
spin_lock_irqsave(&pcmcia_dev_list_lock, flags);
if (list_empty(&skt->devices_list))
@@ -854,17 +864,17 @@
int ret = -ENOMEM;
int no_funcs;
int old_funcs;
- cisdump_t *cis;
cistpl_longlink_mfc_t mfc;
if (!filename)
return -EINVAL;
- ds_dbg(1, "trying to load CIS file %s\n", filename);
+ ds_dev_dbg(1, &dev->dev, "trying to load CIS file %s\n", filename);
if (strlen(filename) > (FIRMWARE_NAME_MAX - 1)) {
- printk(KERN_WARNING "pcmcia: CIS filename is too long [%s]\n",
- filename);
+ dev_printk(KERN_WARNING, &dev->dev,
+ "pcmcia: CIS filename is too long [%s]\n",
+ filename);
return -EINVAL;
}
@@ -873,23 +883,16 @@
if (request_firmware(&fw, path, &dev->dev) == 0) {
if (fw->size >= CISTPL_MAX_CIS_SIZE) {
ret = -EINVAL;
- printk(KERN_ERR "pcmcia: CIS override is too big\n");
+ dev_printk(KERN_ERR, &dev->dev,
+ "pcmcia: CIS override is too big\n");
goto release;
}
- cis = kzalloc(sizeof(cisdump_t), GFP_KERNEL);
- if (!cis) {
- ret = -ENOMEM;
- goto release;
- }
-
- cis->Length = fw->size + 1;
- memcpy(cis->Data, fw->data, fw->size);
-
- if (!pcmcia_replace_cis(s, cis))
+ if (!pcmcia_replace_cis(s, fw->data, fw->size))
ret = 0;
else {
- printk(KERN_ERR "pcmcia: CIS override failed\n");
+ dev_printk(KERN_ERR, &dev->dev,
+ "pcmcia: CIS override failed\n");
goto release;
}
@@ -993,14 +996,14 @@
* after it has re-checked that there is no possible module
* with a prod_id/manf_id/card_id match.
*/
- ds_dbg(0, "skipping FUNC_ID match for %s until userspace "
- "interaction\n", dev->dev.bus_id);
+ ds_dev_dbg(0, &dev->dev,
+ "skipping FUNC_ID match until userspace interaction\n");
if (!dev->allow_func_id_match)
return 0;
}
if (did->match_flags & PCMCIA_DEV_ID_MATCH_FAKE_CIS) {
- ds_dbg(0, "device %s needs a fake CIS\n", dev->dev.bus_id);
+ ds_dev_dbg(0, &dev->dev, "device needs a fake CIS\n");
if (!dev->socket->fake_cis)
pcmcia_load_firmware(dev, did->cisfile);
@@ -1032,11 +1035,9 @@
/* match dynamic devices first */
spin_lock(&p_drv->dynids.lock);
list_for_each_entry(dynid, &p_drv->dynids.list, node) {
- ds_dbg(3, "trying to match %s to %s\n", dev->bus_id,
- drv->name);
+ ds_dev_dbg(3, dev, "trying to match to %s\n", drv->name);
if (pcmcia_devmatch(p_dev, &dynid->id)) {
- ds_dbg(0, "matched %s to %s\n", dev->bus_id,
- drv->name);
+ ds_dev_dbg(0, dev, "matched to %s\n", drv->name);
spin_unlock(&p_drv->dynids.lock);
return 1;
}
@@ -1046,18 +1047,15 @@
#ifdef CONFIG_PCMCIA_IOCTL
/* matching by cardmgr */
if (p_dev->cardmgr == p_drv) {
- ds_dbg(0, "cardmgr matched %s to %s\n", dev->bus_id,
- drv->name);
+ ds_dev_dbg(0, dev, "cardmgr matched to %s\n", drv->name);
return 1;
}
#endif
while (did && did->match_flags) {
- ds_dbg(3, "trying to match %s to %s\n", dev->bus_id,
- drv->name);
+ ds_dev_dbg(3, dev, "trying to match to %s\n", drv->name);
if (pcmcia_devmatch(p_dev, did)) {
- ds_dbg(0, "matched %s to %s\n", dev->bus_id,
- drv->name);
+ ds_dev_dbg(0, dev, "matched to %s\n", drv->name);
return 1;
}
did++;
@@ -1263,7 +1261,7 @@
if (p_dev->suspended)
return 0;
- ds_dbg(2, "suspending %s\n", dev->bus_id);
+ ds_dev_dbg(2, dev, "suspending\n");
if (dev->driver)
p_drv = to_pcmcia_drv(dev->driver);
@@ -1274,15 +1272,16 @@
if (p_drv->suspend) {
ret = p_drv->suspend(p_dev);
if (ret) {
- printk(KERN_ERR "pcmcia: device %s (driver %s) did "
- "not want to go to sleep (%d)\n",
- p_dev->devname, p_drv->drv.name, ret);
+ dev_printk(KERN_ERR, dev,
+ "pcmcia: device %s (driver %s) did "
+ "not want to go to sleep (%d)\n",
+ p_dev->devname, p_drv->drv.name, ret);
goto out;
}
}
if (p_dev->device_no == p_dev->func) {
- ds_dbg(2, "releasing configuration for %s\n", dev->bus_id);
+ ds_dev_dbg(2, dev, "releasing configuration\n");
pcmcia_release_configuration(p_dev);
}
@@ -1302,7 +1301,7 @@
if (!p_dev->suspended)
return 0;
- ds_dbg(2, "resuming %s\n", dev->bus_id);
+ ds_dev_dbg(2, dev, "resuming\n");
if (dev->driver)
p_drv = to_pcmcia_drv(dev->driver);
@@ -1311,7 +1310,7 @@
goto out;
if (p_dev->device_no == p_dev->func) {
- ds_dbg(2, "requesting configuration for %s\n", dev->bus_id);
+ ds_dev_dbg(2, dev, "requesting configuration\n");
ret = pcmcia_request_configuration(p_dev, &p_dev->conf);
if (ret)
goto out;
@@ -1353,14 +1352,14 @@
static int pcmcia_bus_resume(struct pcmcia_socket *skt)
{
- ds_dbg(2, "resuming socket %d\n", skt->sock);
+ ds_dev_dbg(2, &skt->dev, "resuming socket %d\n", skt->sock);
bus_for_each_dev(&pcmcia_bus_type, NULL, skt, pcmcia_bus_resume_callback);
return 0;
}
static int pcmcia_bus_suspend(struct pcmcia_socket *skt)
{
- ds_dbg(2, "suspending socket %d\n", skt->sock);
+ ds_dev_dbg(2, &skt->dev, "suspending socket %d\n", skt->sock);
if (bus_for_each_dev(&pcmcia_bus_type, NULL, skt,
pcmcia_bus_suspend_callback)) {
pcmcia_bus_resume(skt);
@@ -1386,13 +1385,14 @@
struct pcmcia_socket *s = pcmcia_get_socket(skt);
if (!s) {
- printk(KERN_ERR "PCMCIA obtaining reference to socket %p " \
- "failed, event 0x%x lost!\n", skt, event);
+ dev_printk(KERN_ERR, &skt->dev,
+ "PCMCIA obtaining reference to socket " \
+ "failed, event 0x%x lost!\n", event);
return -ENODEV;
}
- ds_dbg(1, "ds_event(0x%06x, %d, 0x%p)\n",
- event, priority, skt);
+ ds_dev_dbg(1, &skt->dev, "ds_event(0x%06x, %d, 0x%p)\n",
+ event, priority, skt);
switch (event) {
case CS_EVENT_CARD_REMOVAL:
@@ -1467,7 +1467,8 @@
socket = pcmcia_get_socket(socket);
if (!socket) {
- printk(KERN_ERR "PCMCIA obtaining reference to socket %p failed\n", socket);
+ dev_printk(KERN_ERR, dev,
+ "PCMCIA obtaining reference to socket failed\n");
return -ENODEV;
}
@@ -1487,7 +1488,7 @@
ret = pccard_register_pcmcia(socket, &pcmcia_bus_callback);
if (ret) {
- printk(KERN_ERR "PCMCIA registration PCCard core failed for socket %p\n", socket);
+ dev_printk(KERN_ERR, dev, "PCMCIA registration failed\n");
pcmcia_put_socket(socket);
return (ret);
}
diff --git a/drivers/pcmcia/i82365.c b/drivers/pcmcia/i82365.c
index 68f6b27..71653ab 100644
--- a/drivers/pcmcia/i82365.c
+++ b/drivers/pcmcia/i82365.c
@@ -63,7 +63,7 @@
#include "vg468.h"
#include "ricoh.h"
-#ifdef DEBUG
+#ifdef CONFIG_PCMCIA_DEBUG
static const char version[] =
"i82365.c 1.265 1999/11/10 18:36:21 (David Hinds)";
diff --git a/drivers/pcmcia/m32r_cfc.c b/drivers/pcmcia/m32r_cfc.c
index 3616da2..2ab4f22 100644
--- a/drivers/pcmcia/m32r_cfc.c
+++ b/drivers/pcmcia/m32r_cfc.c
@@ -38,7 +38,7 @@
#include "m32r_cfc.h"
-#ifdef DEBUG
+#ifdef CONFIG_PCMCIA_DEBUG
static int m32r_cfc_debug;
module_param(m32r_cfc_debug, int, 0644);
#define debug(lvl, fmt, arg...) do { \
@@ -505,7 +505,7 @@
pcc_set(sock,(unsigned int)PLD_CFBUFCR,1);
}
-#ifdef DEBUG
+#ifdef CONFIG_PCMCIA_DEBUG
if(state->flags & SS_IOCARD){
debug(3, ":IOCARD");
}
diff --git a/drivers/pcmcia/m32r_pcc.c b/drivers/pcmcia/m32r_pcc.c
index 2b42b71..2f108c2 100644
--- a/drivers/pcmcia/m32r_pcc.c
+++ b/drivers/pcmcia/m32r_pcc.c
@@ -45,7 +45,7 @@
#define PCC_DEBUG_DBEX
-#ifdef DEBUG
+#ifdef CONFIG_PCMCIA_DEBUG
static int m32r_pcc_debug;
module_param(m32r_pcc_debug, int, 0644);
#define debug(lvl, fmt, arg...) do { \
@@ -460,7 +460,7 @@
pcc_set(sock,PCCSIGCR,reg);
-#ifdef DEBUG
+#ifdef CONFIG_PCMCIA_DEBUG
if(state->flags & SS_IOCARD){
debug(3, ":IOCARD");
}
diff --git a/drivers/pcmcia/m8xx_pcmcia.c b/drivers/pcmcia/m8xx_pcmcia.c
index ff66604..d1ad096 100644
--- a/drivers/pcmcia/m8xx_pcmcia.c
+++ b/drivers/pcmcia/m8xx_pcmcia.c
@@ -64,8 +64,8 @@
#include <pcmcia/cs.h>
#include <pcmcia/ss.h>
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
+#ifdef CONFIG_PCMCIA_DEBUG
+static int pc_debug;
module_param(pc_debug, int, 0);
#define dprintk(args...) printk(KERN_DEBUG "m8xx_pcmcia: " args);
#else
diff --git a/drivers/pcmcia/o2micro.h b/drivers/pcmcia/o2micro.h
index a234ce19..5554015 100644
--- a/drivers/pcmcia/o2micro.h
+++ b/drivers/pcmcia/o2micro.h
@@ -140,7 +140,8 @@
a = config_readb(socket, O2_RESERVED1);
b = config_readb(socket, O2_RESERVED2);
- printk(KERN_INFO "Yenta O2: res at 0x94/0xD4: %02x/%02x\n", a, b);
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "O2: res at 0x94/0xD4: %02x/%02x\n", a, b);
switch (socket->dev->device) {
/*
@@ -153,7 +154,9 @@
case PCI_DEVICE_ID_O2_6812:
case PCI_DEVICE_ID_O2_6832:
case PCI_DEVICE_ID_O2_6836:
- printk(KERN_INFO "Yenta O2: old bridge, disabling read prefetch/write burst\n");
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "Yenta O2: old bridge, disabling read "
+ "prefetch/write burst\n");
config_writeb(socket, O2_RESERVED1,
a & ~(O2_RES_READ_PREFETCH | O2_RES_WRITE_BURST));
config_writeb(socket, O2_RESERVED2,
@@ -161,7 +164,8 @@
break;
default:
- printk(KERN_INFO "Yenta O2: enabling read prefetch/write burst\n");
+ dev_printk(KERN_INFO , &socket->dev->dev,
+ "O2: enabling read prefetch/write burst\n");
config_writeb(socket, O2_RESERVED1,
a | O2_RES_READ_PREFETCH | O2_RES_WRITE_BURST);
config_writeb(socket, O2_RESERVED2,
diff --git a/drivers/pcmcia/pcmcia_ioctl.c b/drivers/pcmcia/pcmcia_ioctl.c
index 419f97f..f555a50 100644
--- a/drivers/pcmcia/pcmcia_ioctl.c
+++ b/drivers/pcmcia/pcmcia_ioctl.c
@@ -58,7 +58,7 @@
} user_info_t;
-#ifdef DEBUG
+#ifdef CONFIG_PCMCIA_DEBUG
extern int ds_pc_debug;
#define ds_dbg(lvl, fmt, arg...) do { \
@@ -867,7 +867,7 @@
&buf->win_info.map);
break;
case DS_REPLACE_CIS:
- ret = pcmcia_replace_cis(s, &buf->cisdump);
+ ret = pcmcia_replace_cis(s, buf->cisdump.Data, buf->cisdump.Length);
break;
case DS_BIND_REQUEST:
if (!capable(CAP_SYS_ADMIN)) {
diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c
index 0cf3ef3..9afe420 100644
--- a/drivers/pcmcia/pcmcia_resource.c
+++ b/drivers/pcmcia/pcmcia_resource.c
@@ -44,16 +44,17 @@
#endif
-#ifdef DEBUG
+#ifdef CONFIG_PCMCIA_DEBUG
extern int ds_pc_debug;
#define ds_dbg(skt, lvl, fmt, arg...) do { \
if (ds_pc_debug >= lvl) \
- printk(KERN_DEBUG "pcmcia_resource: %s: " fmt, \
- cs_socket_name(skt) , ## arg); \
+ dev_printk(KERN_DEBUG, &skt->dev, \
+ "pcmcia_resource: " fmt, \
+ ## arg); \
} while (0)
#else
-#define ds_dbg(lvl, fmt, arg...) do { } while (0)
+#define ds_dbg(skt, lvl, fmt, arg...) do { } while (0)
#endif
@@ -802,8 +803,10 @@
/* Make sure the fact the request type was overridden is passed back */
if (type == IRQF_SHARED && !(req->Attributes & IRQ_TYPE_DYNAMIC_SHARING)) {
req->Attributes |= IRQ_TYPE_DYNAMIC_SHARING;
- printk(KERN_WARNING "pcmcia: request for exclusive IRQ could not be fulfilled.\n");
- printk(KERN_WARNING "pcmcia: the driver needs updating to supported shared IRQ lines.\n");
+ dev_printk(KERN_WARNING, &p_dev->dev, "pcmcia: "
+ "request for exclusive IRQ could not be fulfilled.\n");
+ dev_printk(KERN_WARNING, &p_dev->dev, "pcmcia: the driver "
+ "needs updating to supported shared IRQ lines.\n");
}
c->irq.Attributes = req->Attributes;
s->irq.AssignedIRQ = req->AssignedIRQ = irq;
diff --git a/drivers/pcmcia/rsrc_nonstatic.c b/drivers/pcmcia/rsrc_nonstatic.c
index d0c1d63..00aacbe 100644
--- a/drivers/pcmcia/rsrc_nonstatic.c
+++ b/drivers/pcmcia/rsrc_nonstatic.c
@@ -194,13 +194,14 @@
int any;
u_char *b, hole, most;
- printk(KERN_INFO "cs: IO port probe %#x-%#x:",
- base, base+num-1);
+ dev_printk(KERN_INFO, &s->dev, "cs: IO port probe %#x-%#x:",
+ base, base+num-1);
/* First, what does a floating port look like? */
b = kzalloc(256, GFP_KERNEL);
if (!b) {
- printk(KERN_ERR "do_io_probe: unable to kmalloc 256 bytes");
+ dev_printk(KERN_ERR, &s->dev,
+ "do_io_probe: unable to kmalloc 256 bytes");
return;
}
for (i = base, most = 0; i < base+num; i += 8) {
@@ -366,8 +367,8 @@
struct socket_data *s_data = s->resource_data;
u_long i, j, bad, fail, step;
- printk(KERN_INFO "cs: memory probe 0x%06lx-0x%06lx:",
- base, base+num-1);
+ dev_printk(KERN_INFO, &s->dev, "cs: memory probe 0x%06lx-0x%06lx:",
+ base, base+num-1);
bad = fail = 0;
step = (num < 0x20000) ? 0x2000 : ((num>>4) & ~0x1fff);
/* don't allow too large steps */
@@ -431,8 +432,8 @@
if (probe_mask & MEM_PROBE_HIGH) {
if (inv_probe(s_data->mem_db.next, s) > 0)
return 0;
- printk(KERN_NOTICE "cs: warning: no high memory space "
- "available!\n");
+ dev_printk(KERN_NOTICE, &s->dev,
+ "cs: warning: no high memory space available!\n");
return -ENODEV;
}
@@ -794,10 +795,11 @@
if (res->flags & IORESOURCE_IO) {
if (res == &ioport_resource)
continue;
- printk(KERN_INFO "pcmcia: parent PCI bridge I/O "
- "window: 0x%llx - 0x%llx\n",
- (unsigned long long)res->start,
- (unsigned long long)res->end);
+ dev_printk(KERN_INFO, &s->cb_dev->dev,
+ "pcmcia: parent PCI bridge I/O "
+ "window: 0x%llx - 0x%llx\n",
+ (unsigned long long)res->start,
+ (unsigned long long)res->end);
if (!adjust_io(s, ADD_MANAGED_RESOURCE, res->start, res->end))
done |= IORESOURCE_IO;
@@ -806,10 +808,11 @@
if (res->flags & IORESOURCE_MEM) {
if (res == &iomem_resource)
continue;
- printk(KERN_INFO "pcmcia: parent PCI bridge Memory "
- "window: 0x%llx - 0x%llx\n",
- (unsigned long long)res->start,
- (unsigned long long)res->end);
+ dev_printk(KERN_INFO, &s->cb_dev->dev,
+ "pcmcia: parent PCI bridge Memory "
+ "window: 0x%llx - 0x%llx\n",
+ (unsigned long long)res->start,
+ (unsigned long long)res->end);
if (!adjust_memory(s, ADD_MANAGED_RESOURCE, res->start, res->end))
done |= IORESOURCE_MEM;
}
diff --git a/drivers/pcmcia/soc_common.c b/drivers/pcmcia/soc_common.c
index 8c21446..89edcbc 100644
--- a/drivers/pcmcia/soc_common.c
+++ b/drivers/pcmcia/soc_common.c
@@ -54,7 +54,7 @@
#include <asm/arch/pxa-regs.h>
#endif
-#ifdef DEBUG
+#ifdef CONFIG_PCMCIA_DEBUG
static int pc_debug;
module_param(pc_debug, int, 0644);
diff --git a/drivers/pcmcia/soc_common.h b/drivers/pcmcia/soc_common.h
index 91ef6a0..8e4cc92 100644
--- a/drivers/pcmcia/soc_common.h
+++ b/drivers/pcmcia/soc_common.h
@@ -137,7 +137,7 @@
extern int soc_common_drv_pcmcia_remove(struct device *dev);
-#ifdef DEBUG
+#ifdef CONFIG_PCMCIA_DEBUG
extern void soc_pcmcia_debug(struct soc_pcmcia_socket *skt, const char *func,
int lvl, const char *fmt, ...);
diff --git a/drivers/pcmcia/socket_sysfs.c b/drivers/pcmcia/socket_sysfs.c
index 006a29e..ff9a3bb 100644
--- a/drivers/pcmcia/socket_sysfs.c
+++ b/drivers/pcmcia/socket_sysfs.c
@@ -316,27 +316,18 @@
char *buf, loff_t off, size_t count)
{
struct pcmcia_socket *s = to_socket(container_of(kobj, struct device, kobj));
- cisdump_t *cis;
int error;
if (off)
return -EINVAL;
- if (count >= 0x200)
+ if (count >= CISTPL_MAX_CIS_SIZE)
return -EINVAL;
if (!(s->state & SOCKET_PRESENT))
return -ENODEV;
- cis = kzalloc(sizeof(cisdump_t), GFP_KERNEL);
- if (!cis)
- return -ENOMEM;
-
- cis->Length = count + 1;
- memcpy(cis->Data, buf, count);
-
- error = pcmcia_replace_cis(s, cis);
- kfree(cis);
+ error = pcmcia_replace_cis(s, buf, count);
if (error)
return -EIO;
diff --git a/drivers/pcmcia/tcic.c b/drivers/pcmcia/tcic.c
index 5792bd5..2a613e9 100644
--- a/drivers/pcmcia/tcic.c
+++ b/drivers/pcmcia/tcic.c
@@ -55,7 +55,7 @@
#include <pcmcia/ss.h>
#include "tcic.h"
-#ifdef DEBUG
+#ifdef CONFIG_PCMCIA_DEBUG
static int pc_debug;
module_param(pc_debug, int, 0644);
diff --git a/drivers/pcmcia/ti113x.h b/drivers/pcmcia/ti113x.h
index 129db7b..aaa7022 100644
--- a/drivers/pcmcia/ti113x.h
+++ b/drivers/pcmcia/ti113x.h
@@ -339,8 +339,8 @@
mfunc = mfunc_old = config_readl(socket, TI122X_MFUNC);
devctl = config_readb(socket, TI113X_DEVICE_CONTROL);
- printk(KERN_INFO "Yenta TI: socket %s, mfunc 0x%08x, devctl 0x%02x\n",
- pci_name(socket->dev), mfunc, devctl);
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "TI: mfunc 0x%08x, devctl 0x%02x\n", mfunc, devctl);
/* make sure PCI interrupts are enabled before probing */
ti_init(socket);
@@ -354,8 +354,8 @@
* We're here which means PCI interrupts are _not_ delivered. try to
* find the right setting (all serial or parallel)
*/
- printk(KERN_INFO "Yenta TI: socket %s probing PCI interrupt failed, trying to fix\n",
- pci_name(socket->dev));
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "TI: probing PCI interrupt failed, trying to fix\n");
/* for serial PCI make sure MFUNC3 is set to IRQSER */
if ((devctl & TI113X_DCR_IMODE_MASK) == TI12XX_DCR_IMODE_ALL_SERIAL) {
@@ -379,8 +379,8 @@
pci_irq_status = yenta_probe_cb_irq(socket);
if (pci_irq_status == 1) {
- printk(KERN_INFO "Yenta TI: socket %s all-serial interrupts ok\n",
- pci_name(socket->dev));
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "TI: all-serial interrupts ok\n");
mfunc_old = mfunc;
goto out;
}
@@ -395,8 +395,8 @@
}
/* serial PCI interrupts not working fall back to parallel */
- printk(KERN_INFO "Yenta TI: socket %s falling back to parallel PCI interrupts\n",
- pci_name(socket->dev));
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "TI: falling back to parallel PCI interrupts\n");
devctl &= ~TI113X_DCR_IMODE_MASK;
devctl |= TI113X_DCR_IMODE_SERIAL; /* serial ISA could be right */
config_writeb(socket, TI113X_DEVICE_CONTROL, devctl);
@@ -427,8 +427,8 @@
pci_irq_status = yenta_probe_cb_irq(socket);
if (pci_irq_status == 1) {
mfunc_old = mfunc;
- printk(KERN_INFO "Yenta TI: socket %s parallel PCI interrupts ok\n",
- pci_name(socket->dev));
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "TI: parallel PCI interrupts ok\n");
} else {
/* not working, back to old value */
mfunc = mfunc_old;
@@ -440,8 +440,9 @@
out:
if (pci_irq_status < 1) {
socket->cb_irq = 0;
- printk(KERN_INFO "Yenta TI: socket %s no PCI interrupts. Fish. Please report.\n",
- pci_name(socket->dev));
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "Yenta TI: no PCI interrupts. Fish. "
+ "Please report.\n");
}
}
@@ -513,8 +514,9 @@
mfunc = mfunc_old = config_readl(socket, TI122X_MFUNC);
devctl = config_readb(socket, TI113X_DEVICE_CONTROL);
- printk(KERN_INFO "Yenta TI: socket %s, mfunc 0x%08x, devctl 0x%02x\n",
- pci_name(socket->dev), mfunc, devctl);
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "TI: mfunc 0x%08x, devctl 0x%02x\n",
+ mfunc, devctl);
/* if IRQs are configured as tied, align irq of func1 with func0 */
sysctl = config_readl(socket, TI113X_SYSTEM_CONTROL);
@@ -533,9 +535,8 @@
* We're here which means PCI interrupts are _not_ delivered. try to
* find the right setting
*/
- printk(KERN_INFO "Yenta TI: socket %s probing PCI interrupt failed, trying to fix\n",
- pci_name(socket->dev));
-
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "TI: probing PCI interrupt failed, trying to fix\n");
/* if all serial: set INTRTIE, probe again */
if ((devctl & TI113X_DCR_IMODE_MASK) == TI12XX_DCR_IMODE_ALL_SERIAL) {
@@ -544,8 +545,8 @@
if (ti12xx_tie_interrupts(socket, &old_irq)) {
pci_irq_status = yenta_probe_cb_irq(socket);
if (pci_irq_status == 1) {
- printk(KERN_INFO "Yenta TI: socket %s all-serial interrupts, tied ok\n",
- pci_name(socket->dev));
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "TI: all-serial interrupts, tied ok\n");
goto out;
}
@@ -582,8 +583,8 @@
pci_irq_status = yenta_probe_cb_irq(socket);
if (pci_irq_status == 1) {
- printk(KERN_INFO "Yenta TI: socket %s parallel PCI interrupts ok\n",
- pci_name(socket->dev));
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "TI: parallel PCI interrupts ok\n");
goto out;
}
@@ -593,13 +594,13 @@
if (pci_irq_status == -1)
goto out;
}
-
+
/* still nothing: set INTRTIE */
if (ti12xx_tie_interrupts(socket, &old_irq)) {
pci_irq_status = yenta_probe_cb_irq(socket);
if (pci_irq_status == 1) {
- printk(KERN_INFO "Yenta TI: socket %s parallel PCI interrupts, tied ok\n",
- pci_name(socket->dev));
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "TI: parallel PCI interrupts, tied ok\n");
goto out;
}
@@ -610,8 +611,8 @@
out:
if (pci_irq_status < 1) {
socket->cb_irq = 0;
- printk(KERN_INFO "Yenta TI: socket %s no PCI interrupts. Fish. Please report.\n",
- pci_name(socket->dev));
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "TI: no PCI interrupts. Fish. Please report.\n");
}
}
@@ -815,11 +816,13 @@
/* make sure that memory burst is active */
val_orig = val = config_readl(socket, TI113X_SYSTEM_CONTROL);
if (disable_clkrun && PCI_FUNC(socket->dev->devfn) == 0) {
- printk(KERN_INFO "Yenta: Disabling CLKRUN feature\n");
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "Disabling CLKRUN feature\n");
val |= TI113X_SCR_KEEPCLK;
}
if (!(val & TI122X_SCR_MRBURSTUP)) {
- printk(KERN_INFO "Yenta: Enabling burst memory read transactions\n");
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "Enabling burst memory read transactions\n");
val |= TI122X_SCR_MRBURSTUP;
}
if (val_orig != val)
@@ -830,10 +833,12 @@
* CSC interrupts to PCI rather than INTVAL.
*/
val = config_readb(socket, TI1250_DIAGNOSTIC);
- printk(KERN_INFO "Yenta: Using %s to route CSC interrupts to PCI\n",
- (val & TI1250_DIAG_PCI_CSC) ? "CSCINT" : "INTVAL");
- printk(KERN_INFO "Yenta: Routing CardBus interrupts to %s\n",
- (val & TI1250_DIAG_PCI_IREQ) ? "PCI" : "ISA");
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "Using %s to route CSC interrupts to PCI\n",
+ (val & TI1250_DIAG_PCI_CSC) ? "CSCINT" : "INTVAL");
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "Routing CardBus interrupts to %s\n",
+ (val & TI1250_DIAG_PCI_IREQ) ? "PCI" : "ISA");
/* do irqrouting, depending on function */
if (PCI_FUNC(socket->dev->devfn) == 0)
@@ -858,8 +863,9 @@
diag |= TI1250_DIAG_PCI_CSC | TI1250_DIAG_PCI_IREQ;
if (diag != old) {
- printk(KERN_INFO "Yenta: adjusting diagnostic: %02x -> %02x\n",
- old, diag);
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "adjusting diagnostic: %02x -> %02x\n",
+ old, diag);
config_writeb(socket, TI1250_DIAGNOSTIC, diag);
}
@@ -924,7 +930,9 @@
/* default to clear TLTEnable bit, old behaviour */
test_c9 &= ~ENE_TEST_C9_TLTENABLE;
- printk(KERN_INFO "yenta EnE: chaning testregister 0xC9, %02x -> %02x\n", old_c9, test_c9);
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "EnE: chaning testregister 0xC9, %02x -> %02x\n",
+ old_c9, test_c9);
config_writeb(socket, ENE_TEST_C9, test_c9);
}
diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c
index 0ab1fb6..3ecd7c9 100644
--- a/drivers/pcmcia/yenta_socket.c
+++ b/drivers/pcmcia/yenta_socket.c
@@ -38,11 +38,7 @@
module_param(pwr_irqs_off, bool, 0644);
MODULE_PARM_DESC(pwr_irqs_off, "Force IRQs off during power-on of slot. Use only when seeing IRQ storms!");
-#if 0
-#define debug(x,args...) printk(KERN_DEBUG "%s: " x, __func__ , ##args)
-#else
-#define debug(x,args...)
-#endif
+#define debug(x, s, args...) dev_dbg(&s->dev->dev, x, ##args)
/* Don't ask.. */
#define to_cycles(ns) ((ns)/120)
@@ -69,13 +65,13 @@
static inline u32 cb_readl(struct yenta_socket *socket, unsigned reg)
{
u32 val = readl(socket->base + reg);
- debug("%p %04x %08x\n", socket, reg, val);
+ debug("%04x %08x\n", socket, reg, val);
return val;
}
static inline void cb_writel(struct yenta_socket *socket, unsigned reg, u32 val)
{
- debug("%p %04x %08x\n", socket, reg, val);
+ debug("%04x %08x\n", socket, reg, val);
writel(val, socket->base + reg);
readl(socket->base + reg); /* avoid problems with PCI write posting */
}
@@ -84,7 +80,7 @@
{
u8 val;
pci_read_config_byte(socket->dev, offset, &val);
- debug("%p %04x %02x\n", socket, offset, val);
+ debug("%04x %02x\n", socket, offset, val);
return val;
}
@@ -92,7 +88,7 @@
{
u16 val;
pci_read_config_word(socket->dev, offset, &val);
- debug("%p %04x %04x\n", socket, offset, val);
+ debug("%04x %04x\n", socket, offset, val);
return val;
}
@@ -100,32 +96,32 @@
{
u32 val;
pci_read_config_dword(socket->dev, offset, &val);
- debug("%p %04x %08x\n", socket, offset, val);
+ debug("%04x %08x\n", socket, offset, val);
return val;
}
static inline void config_writeb(struct yenta_socket *socket, unsigned offset, u8 val)
{
- debug("%p %04x %02x\n", socket, offset, val);
+ debug("%04x %02x\n", socket, offset, val);
pci_write_config_byte(socket->dev, offset, val);
}
static inline void config_writew(struct yenta_socket *socket, unsigned offset, u16 val)
{
- debug("%p %04x %04x\n", socket, offset, val);
+ debug("%04x %04x\n", socket, offset, val);
pci_write_config_word(socket->dev, offset, val);
}
static inline void config_writel(struct yenta_socket *socket, unsigned offset, u32 val)
{
- debug("%p %04x %08x\n", socket, offset, val);
+ debug("%04x %08x\n", socket, offset, val);
pci_write_config_dword(socket->dev, offset, val);
}
static inline u8 exca_readb(struct yenta_socket *socket, unsigned reg)
{
u8 val = readb(socket->base + 0x800 + reg);
- debug("%p %04x %02x\n", socket, reg, val);
+ debug("%04x %02x\n", socket, reg, val);
return val;
}
@@ -134,20 +130,20 @@
u16 val;
val = readb(socket->base + 0x800 + reg);
val |= readb(socket->base + 0x800 + reg + 1) << 8;
- debug("%p %04x %04x\n", socket, reg, val);
+ debug("%04x %04x\n", socket, reg, val);
return val;
}
static inline void exca_writeb(struct yenta_socket *socket, unsigned reg, u8 val)
{
- debug("%p %04x %02x\n", socket, reg, val);
+ debug("%04x %02x\n", socket, reg, val);
writeb(val, socket->base + 0x800 + reg);
readb(socket->base + 0x800 + reg); /* PCI write posting... */
}
static void exca_writew(struct yenta_socket *socket, unsigned reg, u16 val)
{
- debug("%p %04x %04x\n", socket, reg, val);
+ debug("%04x %04x\n", socket, reg, val);
writeb(val, socket->base + 0x800 + reg);
writeb(val >> 8, socket->base + 0x800 + reg + 1);
@@ -207,7 +203,7 @@
if (state & CB_CBCARD) {
- val |= SS_CARDBUS;
+ val |= SS_CARDBUS;
val |= (state & CB_CARDSTS) ? SS_STSCHG : 0;
val |= (state & (CB_CDETECT1 | CB_CDETECT2)) ? 0 : SS_DETECT;
val |= (state & CB_PWRCYCLE) ? SS_POWERON | SS_READY : 0;
@@ -650,8 +646,10 @@
root = pci_find_parent_resource(socket->dev, res);
if (root && (request_resource(root, res) == 0))
return 0;
- printk(KERN_INFO "yenta %s: Preassigned resource %d busy or not available, reconfiguring...\n",
- pci_name(socket->dev), nr);
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "Preassigned resource %d busy or not available, "
+ "reconfiguring...\n",
+ nr);
}
if (type & IORESOURCE_IO) {
@@ -674,8 +672,9 @@
return 1;
}
- printk(KERN_INFO "yenta %s: no resource of type %x available, trying to continue...\n",
- pci_name(socket->dev), type);
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "no resource of type %x available, trying to continue...\n",
+ type);
res->start = res->end = res->flags = 0;
return 0;
}
@@ -923,7 +922,8 @@
socket->probe_status = 0;
if (request_irq(socket->cb_irq, yenta_probe_handler, IRQF_SHARED, "yenta", socket)) {
- printk(KERN_WARNING "Yenta: request_irq() in yenta_probe_cb_irq() failed!\n");
+ dev_printk(KERN_WARNING, &socket->dev->dev,
+ "request_irq() in yenta_probe_cb_irq() failed!\n");
return -1;
}
@@ -960,8 +960,9 @@
else
socket->socket.irq_mask = 0;
- printk(KERN_INFO "Yenta: ISA IRQ mask 0x%04x, PCI irq %d\n",
- socket->socket.irq_mask, socket->cb_irq);
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "ISA IRQ mask 0x%04x, PCI irq %d\n",
+ socket->socket.irq_mask, socket->cb_irq);
}
/*
@@ -1051,8 +1052,9 @@
/* Show that the wanted subordinate number is not possible: */
if (cardbus_bridge->subordinate > upper_limit)
- printk(KERN_WARNING "Yenta: Upper limit for fixing this "
- "bridge's parent bridge: #%02x\n", upper_limit);
+ dev_printk(KERN_WARNING, &cardbus_bridge->dev,
+ "Upper limit for fixing this "
+ "bridge's parent bridge: #%02x\n", upper_limit);
/* If we have room to increase the bridge's subordinate number, */
if (bridge_to_fix->subordinate < upper_limit) {
@@ -1061,10 +1063,11 @@
unsigned char subordinate_to_assign =
min(cardbus_bridge->subordinate, upper_limit);
- printk(KERN_INFO "Yenta: Raising subordinate bus# of parent "
- "bus (#%02x) from #%02x to #%02x\n",
- bridge_to_fix->number,
- bridge_to_fix->subordinate, subordinate_to_assign);
+ dev_printk(KERN_INFO, &bridge_to_fix->dev,
+ "Raising subordinate bus# of parent "
+ "bus (#%02x) from #%02x to #%02x\n",
+ bridge_to_fix->number,
+ bridge_to_fix->subordinate, subordinate_to_assign);
/* Save the new subordinate in the bus struct of the bridge */
bridge_to_fix->subordinate = subordinate_to_assign;
@@ -1091,8 +1094,8 @@
* Bail out if so.
*/
if (!dev->subordinate) {
- printk(KERN_ERR "Yenta: no bus associated with %s! "
- "(try 'pci=assign-busses')\n", pci_name(dev));
+ dev_printk(KERN_ERR, &dev->dev, "no bus associated! "
+ "(try 'pci=assign-busses')\n");
return -ENODEV;
}
@@ -1127,7 +1130,7 @@
goto disable;
if (!pci_resource_start(dev, 0)) {
- printk(KERN_ERR "No cardbus resource!\n");
+ dev_printk(KERN_ERR, &dev->dev, "No cardbus resource!\n");
ret = -ENODEV;
goto release;
}
@@ -1146,8 +1149,8 @@
* report the subsystem vendor and device for help debugging
* the irq stuff...
*/
- printk(KERN_INFO "Yenta: CardBus bridge found at %s [%04x:%04x]\n",
- pci_name(dev), dev->subsystem_vendor, dev->subsystem_device);
+ dev_printk(KERN_INFO, &dev->dev, "CardBus bridge found [%04x:%04x]\n",
+ dev->subsystem_vendor, dev->subsystem_device);
yenta_config_init(socket);
@@ -1179,8 +1182,12 @@
socket->poll_timer.data = (unsigned long)socket;
socket->poll_timer.expires = jiffies + HZ;
add_timer(&socket->poll_timer);
- printk(KERN_INFO "Yenta: no PCI IRQ, CardBus support disabled for this socket.\n"
- KERN_INFO "Yenta: check your BIOS CardBus, BIOS IRQ or ACPI settings.\n");
+ dev_printk(KERN_INFO, &dev->dev,
+ "no PCI IRQ, CardBus support disabled for this "
+ "socket.\n");
+ dev_printk(KERN_INFO, &dev->dev,
+ "check your BIOS CardBus, BIOS IRQ or ACPI "
+ "settings.\n");
} else {
socket->socket.features |= SS_CAP_CARDBUS;
}
@@ -1188,7 +1195,8 @@
/* Figure out what the dang thing can do for the PCMCIA layer... */
yenta_interrogate(socket);
yenta_get_socket_capabilities(socket, isa_interrupts);
- printk(KERN_INFO "Socket status: %08x\n", cb_readl(socket, CB_SOCKET_STATE));
+ dev_printk(KERN_INFO, &dev->dev,
+ "Socket status: %08x\n", cb_readl(socket, CB_SOCKET_STATE));
yenta_fixup_parent_bridge(dev->subordinate);
diff --git a/include/pcmcia/cistpl.h b/include/pcmcia/cistpl.h
index 0092910..75a9d34 100644
--- a/include/pcmcia/cistpl.h
+++ b/include/pcmcia/cistpl.h
@@ -580,14 +580,8 @@
#define CISTPL_MAX_CIS_SIZE 0x200
-/* For ReplaceCIS */
-typedef struct cisdump_t {
- u_int Length;
- cisdata_t Data[CISTPL_MAX_CIS_SIZE];
-} cisdump_t;
-
-
-int pcmcia_replace_cis(struct pcmcia_socket *s, cisdump_t *cis);
+int pcmcia_replace_cis(struct pcmcia_socket *s,
+ const u8 *data, const size_t len);
/* don't use outside of PCMCIA core yet */
int pccard_get_next_tuple(struct pcmcia_socket *s, unsigned int func, tuple_t *tuple);
diff --git a/include/pcmcia/ds.h b/include/pcmcia/ds.h
index b316027..2d36a4f 100644
--- a/include/pcmcia/ds.h
+++ b/include/pcmcia/ds.h
@@ -68,6 +68,12 @@
#define REGION_BAR_MASK 0xe000
#define REGION_BAR_SHIFT 13
+/* For ReplaceCIS */
+typedef struct cisdump_t {
+ u_int Length;
+ cisdata_t Data[CISTPL_MAX_CIS_SIZE];
+} cisdump_t;
+
typedef union ds_ioctl_arg_t {
adjust_t adjust;
config_info_t config;
diff --git a/include/pcmcia/ss.h b/include/pcmcia/ss.h
index ed919dd..e34bef0 100644
--- a/include/pcmcia/ss.h
+++ b/include/pcmcia/ss.h
@@ -199,8 +199,8 @@
io_window_t io[MAX_IO_WIN];
window_t win[MAX_WIN];
struct list_head cis_cache;
- u_int fake_cis_len;
- char *fake_cis;
+ size_t fake_cis_len;
+ u8 *fake_cis;
struct list_head socket_list;
struct completion socket_released;
