Merge branches 'pcmcia-config-loop' and 'pcmcia-printk' into pcmcia
* pcmcia-config-loop:
pcmcia: pcmcia_config_loop() improvement by passing vcc
pcmcia: pcmcia_config_loop() default CIS entry handling
pcmcia: pcmcia_config_loop() ConfigIndex unification
pcmcia: use pcmcia_loop_config in misc pcmcia drivers
pcmcia: use pcmcia_loop_config in net pcmcia drivers
pcmcia: use pcmcia_loop_config in ISDN pcmcia drivers
pcmcia: use pcmcia_loop_config in scsi pcmcia drivers
pcmcia: use pcmcia_loop_config in bluetooth drivers
pcmcia: use pcmcia_loop_config in pata and ide drivers
pcmcia: add pcmcia_loop_config() helper
* pcmcia-printk:
pcmcia: don't add extra DEBUG cflag
pcmcia: remove unused cs_socket_name() definition
pcmcia: use dev_printk in module rsrc_nonstatic
pcmcia: use dev_printk in module pcmcia
pcmcia: use dev_printk in module pcmcia_core
pcmcia: use dev_printk and dev_dbg in yenta_socket
diff --git a/Documentation/pcmcia/driver-changes.txt b/Documentation/pcmcia/driver-changes.txt
index 96f155e..0599343 100644
--- a/Documentation/pcmcia/driver-changes.txt
+++ b/Documentation/pcmcia/driver-changes.txt
@@ -1,5 +1,11 @@
This file details changes in 2.6 which affect PCMCIA card driver authors:
+* New configuration loop helper (as of 2.6.28)
+ By calling pcmcia_loop_config(), a driver can iterate over all available
+ configuration options. During a driver's probe() phase, one doesn't need
+ to use pcmcia_get_{first,next}_tuple, pcmcia_get_tuple_data and
+ pcmcia_parse_tuple directly in most if not all cases.
+
* New release helper (as of 2.6.17)
Instead of calling pcmcia_release_{configuration,io,irq,win}, all that's
necessary now is calling pcmcia_disable_device. As there is no valid
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index 41b4361..02b596b 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -148,6 +148,64 @@
#define CS_CHECK(fn, ret) \
do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
+
+struct pcmcia_config_check {
+ unsigned long ctl_base;
+ int skip_vcc;
+ int is_kme;
+};
+
+static int pcmcia_check_one_config(struct pcmcia_device *pdev,
+ cistpl_cftable_entry_t *cfg,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ struct pcmcia_config_check *stk = priv_data;
+
+ /* Check for matching Vcc, unless we're desperate */
+ if (!stk->skip_vcc) {
+ if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+ if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000)
+ return -ENODEV;
+ } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+ if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000)
+ return -ENODEV;
+ }
+ }
+
+ if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
+ pdev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+ else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM))
+ pdev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+
+ if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+ cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
+ pdev->io.BasePort1 = io->win[0].base;
+ pdev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
+ if (!(io->flags & CISTPL_IO_16BIT))
+ pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+ if (io->nwin == 2) {
+ pdev->io.NumPorts1 = 8;
+ pdev->io.BasePort2 = io->win[1].base;
+ pdev->io.NumPorts2 = (stk->is_kme) ? 2 : 1;
+ if (pcmcia_request_io(pdev, &pdev->io) != 0)
+ return -ENODEV;
+ stk->ctl_base = pdev->io.BasePort2;
+ } else if ((io->nwin == 1) && (io->win[0].len >= 16)) {
+ pdev->io.NumPorts1 = io->win[0].len;
+ pdev->io.NumPorts2 = 0;
+ if (pcmcia_request_io(pdev, &pdev->io) != 0)
+ return -ENODEV;
+ stk->ctl_base = pdev->io.BasePort1 + 0x0e;
+ } else
+ return -ENODEV;
+ /* If we've got this far, we're done */
+ return 0;
+ }
+ return -ENODEV;
+}
+
/**
* pcmcia_init_one - attach a PCMCIA interface
* @pdev: pcmcia device
@@ -161,19 +219,11 @@
struct ata_host *host;
struct ata_port *ap;
struct ata_pcmcia_info *info;
- tuple_t tuple;
- struct {
- unsigned short buf[128];
- cisparse_t parse;
- config_info_t conf;
- cistpl_cftable_entry_t dflt;
- } *stk = NULL;
- cistpl_cftable_entry_t *cfg;
- int pass, last_ret = 0, last_fn = 0, is_kme = 0, ret = -ENOMEM, p;
+ struct pcmcia_config_check *stk = NULL;
+ int last_ret = 0, last_fn = 0, is_kme = 0, ret = -ENOMEM, p;
unsigned long io_base, ctl_base;
void __iomem *io_addr, *ctl_addr;
int n_ports = 1;
-
struct ata_port_operations *ops = &pcmcia_port_ops;
info = kzalloc(sizeof(*info), GFP_KERNEL);
@@ -193,96 +243,27 @@
pdev->conf.Attributes = CONF_ENABLE_IRQ;
pdev->conf.IntType = INT_MEMORY_AND_IO;
- /* Allocate resoure probing structures */
-
- stk = kzalloc(sizeof(*stk), GFP_KERNEL);
- if (!stk)
- goto out1;
-
- cfg = &stk->parse.cftable_entry;
-
- /* Tuples we are walking */
- tuple.TupleData = (cisdata_t *)&stk->buf;
- tuple.TupleOffset = 0;
- tuple.TupleDataMax = 255;
- tuple.Attributes = 0;
-
/* See if we have a manufacturer identifier. Use it to set is_kme for
vendor quirks */
is_kme = ((pdev->manf_id == MANFID_KME) &&
((pdev->card_id == PRODID_KME_KXLC005_A) ||
(pdev->card_id == PRODID_KME_KXLC005_B)));
- /* Not sure if this is right... look up the current Vcc */
- CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(pdev, &stk->conf));
-/* link->conf.Vcc = stk->conf.Vcc; */
+ /* Allocate resoure probing structures */
- pass = io_base = ctl_base = 0;
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- tuple.Attributes = 0;
- CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(pdev, &tuple));
+ stk = kzalloc(sizeof(*stk), GFP_KERNEL);
+ if (!stk)
+ goto out1;
+ stk->is_kme = is_kme;
+ stk->skip_vcc = io_base = ctl_base = 0;
- /* Now munch the resources looking for a suitable set */
- while (1) {
- if (pcmcia_get_tuple_data(pdev, &tuple) != 0)
- goto next_entry;
- if (pcmcia_parse_tuple(pdev, &tuple, &stk->parse) != 0)
- goto next_entry;
- /* Check for matching Vcc, unless we're desperate */
- if (!pass) {
- if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
- if (stk->conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000)
- goto next_entry;
- } else if (stk->dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) {
- if (stk->conf.Vcc != stk->dflt.vcc.param[CISTPL_POWER_VNOM] / 10000)
- goto next_entry;
- }
- }
-
- if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
- pdev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
- else if (stk->dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
- pdev->conf.Vpp = stk->dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
-
- if ((cfg->io.nwin > 0) || (stk->dflt.io.nwin > 0)) {
- cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &stk->dflt.io;
- pdev->conf.ConfigIndex = cfg->index;
- pdev->io.BasePort1 = io->win[0].base;
- pdev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
- if (!(io->flags & CISTPL_IO_16BIT))
- pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- if (io->nwin == 2) {
- pdev->io.NumPorts1 = 8;
- pdev->io.BasePort2 = io->win[1].base;
- pdev->io.NumPorts2 = (is_kme) ? 2 : 1;
- if (pcmcia_request_io(pdev, &pdev->io) != 0)
- goto next_entry;
- io_base = pdev->io.BasePort1;
- ctl_base = pdev->io.BasePort2;
- } else if ((io->nwin == 1) && (io->win[0].len >= 16)) {
- pdev->io.NumPorts1 = io->win[0].len;
- pdev->io.NumPorts2 = 0;
- if (pcmcia_request_io(pdev, &pdev->io) != 0)
- goto next_entry;
- io_base = pdev->io.BasePort1;
- ctl_base = pdev->io.BasePort1 + 0x0e;
- } else
- goto next_entry;
- /* If we've got this far, we're done */
- break;
- }
-next_entry:
- if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
- memcpy(&stk->dflt, cfg, sizeof(stk->dflt));
- if (pass) {
- CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(pdev, &tuple));
- } else if (pcmcia_get_next_tuple(pdev, &tuple) != 0) {
- CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(pdev, &tuple));
- memset(&stk->dflt, 0, sizeof(stk->dflt));
- pass++;
- }
+ if (pcmcia_loop_config(pdev, pcmcia_check_one_config, stk)) {
+ stk->skip_vcc = 1;
+ if (pcmcia_loop_config(pdev, pcmcia_check_one_config, stk))
+ goto failed; /* No suitable config found */
}
-
+ io_base = pdev->io.BasePort1;
+ ctl_base = stk->ctl_base;
CS_CHECK(RequestIRQ, pcmcia_request_irq(pdev, &pdev->irq));
CS_CHECK(RequestConfiguration, pcmcia_request_configuration(pdev, &pdev->conf));
@@ -384,6 +365,7 @@
PCMCIA_DEVICE_MANF_CARD(0x0032, 0x0704),
PCMCIA_DEVICE_MANF_CARD(0x0032, 0x2904),
PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401), /* SanDisk CFA */
+ PCMCIA_DEVICE_MANF_CARD(0x004f, 0x0000), /* Kingston */
PCMCIA_DEVICE_MANF_CARD(0x0097, 0x1620), /* TI emulated */
PCMCIA_DEVICE_MANF_CARD(0x0098, 0x0000), /* Toshiba */
PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x002d),
@@ -404,9 +386,9 @@
PCMCIA_DEVICE_PROD_ID12("EXP ", "CD-ROM", 0x0a5c52fd, 0x66536591),
PCMCIA_DEVICE_PROD_ID12("EXP ", "PnPIDE", 0x0a5c52fd, 0x0c694728),
PCMCIA_DEVICE_PROD_ID12("FREECOM", "PCCARD-IDE", 0x5714cbf7, 0x48e0ab8e),
- PCMCIA_DEVICE_PROD_ID12("Hyperstone", "Model1", 0x3d5b9ef5, 0xca6ab420),
PCMCIA_DEVICE_PROD_ID12("HITACHI", "FLASH", 0xf4f43949, 0x9eb86aae),
PCMCIA_DEVICE_PROD_ID12("HITACHI", "microdrive", 0xf4f43949, 0xa6d76178),
+ PCMCIA_DEVICE_PROD_ID12("Hyperstone", "Model1", 0x3d5b9ef5, 0xca6ab420),
PCMCIA_DEVICE_PROD_ID12("IBM", "microdrive", 0xb569a6e5, 0xa6d76178),
PCMCIA_DEVICE_PROD_ID12("IBM", "IBM17JSSFP20", 0xb569a6e5, 0xf2508753),
PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF8GB", 0x2e6d1829, 0xacbe682e),
diff --git a/drivers/bluetooth/bt3c_cs.c b/drivers/bluetooth/bt3c_cs.c
index 593b7c5..3fd8022 100644
--- a/drivers/bluetooth/bt3c_cs.c
+++ b/drivers/bluetooth/bt3c_cs.c
@@ -678,93 +678,70 @@
kfree(info);
}
-static int get_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse)
+static int bt3c_check_config(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cf,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
{
- int i;
+ unsigned long try = (unsigned long) priv_data;
- i = pcmcia_get_tuple_data(handle, tuple);
- if (i != CS_SUCCESS)
- return i;
-
- return pcmcia_parse_tuple(handle, tuple, parse);
+ if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
+ p_dev->conf.Vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+ if ((cf->io.nwin > 0) && (cf->io.win[0].len == 8) &&
+ (cf->io.win[0].base != 0)) {
+ p_dev->io.BasePort1 = cf->io.win[0].base;
+ p_dev->io.IOAddrLines = (try == 0) ? 16 :
+ cf->io.flags & CISTPL_IO_LINES_MASK;
+ if (!pcmcia_request_io(p_dev, &p_dev->io))
+ return 0;
+ }
+ return -ENODEV;
}
-static int first_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse)
+static int bt3c_check_config_notpicky(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cf,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
{
- if (pcmcia_get_first_tuple(handle, tuple) != CS_SUCCESS)
- return CS_NO_MORE_ITEMS;
- return get_tuple(handle, tuple, parse);
-}
+ static unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
+ int j;
-static int next_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse)
-{
- if (pcmcia_get_next_tuple(handle, tuple) != CS_SUCCESS)
- return CS_NO_MORE_ITEMS;
- return get_tuple(handle, tuple, parse);
+ if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
+ for (j = 0; j < 5; j++) {
+ p_dev->io.BasePort1 = base[j];
+ p_dev->io.IOAddrLines = base[j] ? 16 : 3;
+ if (!pcmcia_request_io(p_dev, &p_dev->io))
+ return 0;
+ }
+ }
+ return -ENODEV;
}
static int bt3c_config(struct pcmcia_device *link)
{
- static unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
bt3c_info_t *info = link->priv;
- tuple_t tuple;
- u_short buf[256];
- cisparse_t parse;
- cistpl_cftable_entry_t *cf = &parse.cftable_entry;
- int i, j, try;
+ int i;
+ unsigned long try;
- /* First pass: look for a config entry that looks normal. */
- tuple.TupleData = (cisdata_t *)buf;
- tuple.TupleOffset = 0;
- tuple.TupleDataMax = 255;
- tuple.Attributes = 0;
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- /* Two tries: without IO aliases, then with aliases */
- for (try = 0; try < 2; try++) {
- i = first_tuple(link, &tuple, &parse);
- while (i != CS_NO_MORE_ITEMS) {
- if (i != CS_SUCCESS)
- goto next_entry;
- if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
- link->conf.Vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
- if ((cf->io.nwin > 0) && (cf->io.win[0].len == 8) && (cf->io.win[0].base != 0)) {
- link->conf.ConfigIndex = cf->index;
- link->io.BasePort1 = cf->io.win[0].base;
- link->io.IOAddrLines = (try == 0) ? 16 : cf->io.flags & CISTPL_IO_LINES_MASK;
- i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS)
- goto found_port;
- }
-next_entry:
- i = next_tuple(link, &tuple, &parse);
- }
- }
+ /* First pass: look for a config entry that looks normal.
+ Two tries: without IO aliases, then with aliases */
+ for (try = 0; try < 2; try++)
+ if (!pcmcia_loop_config(link, bt3c_check_config, (void *) try))
+ goto found_port;
/* Second pass: try to find an entry that isn't picky about
its base address, then try to grab any standard serial port
address, and finally try to get any free port. */
- i = first_tuple(link, &tuple, &parse);
- while (i != CS_NO_MORE_ITEMS) {
- if ((i == CS_SUCCESS) && (cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
- link->conf.ConfigIndex = cf->index;
- for (j = 0; j < 5; j++) {
- link->io.BasePort1 = base[j];
- link->io.IOAddrLines = base[j] ? 16 : 3;
- i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS)
- goto found_port;
- }
- }
- i = next_tuple(link, &tuple, &parse);
- }
+ if (!pcmcia_loop_config(link, bt3c_check_config_notpicky, NULL))
+ goto found_port;
+
+ BT_ERR("No usable port range found");
+ cs_error(link, RequestIO, -ENODEV);
+ goto failed;
found_port:
- if (i != CS_SUCCESS) {
- BT_ERR("No usable port range found");
- cs_error(link, RequestIO, i);
- goto failed;
- }
-
i = pcmcia_request_irq(link, &link->irq);
if (i != CS_SUCCESS) {
cs_error(link, RequestIRQ, i);
diff --git a/drivers/bluetooth/btuart_cs.c b/drivers/bluetooth/btuart_cs.c
index 68d1d25..1718312 100644
--- a/drivers/bluetooth/btuart_cs.c
+++ b/drivers/bluetooth/btuart_cs.c
@@ -607,94 +607,70 @@
kfree(info);
}
-static int get_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse)
+static int btuart_check_config(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cf,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
{
- int i;
+ int *try = priv_data;
- i = pcmcia_get_tuple_data(handle, tuple);
- if (i != CS_SUCCESS)
- return i;
-
- return pcmcia_parse_tuple(handle, tuple, parse);
+ if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
+ p_dev->conf.Vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+ if ((cf->io.nwin > 0) && (cf->io.win[0].len == 8) &&
+ (cf->io.win[0].base != 0)) {
+ p_dev->io.BasePort1 = cf->io.win[0].base;
+ p_dev->io.IOAddrLines = (*try == 0) ? 16 :
+ cf->io.flags & CISTPL_IO_LINES_MASK;
+ if (!pcmcia_request_io(p_dev, &p_dev->io))
+ return 0;
+ }
+ return -ENODEV;
}
-static int first_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse)
+static int btuart_check_config_notpicky(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cf,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
{
- if (pcmcia_get_first_tuple(handle, tuple) != CS_SUCCESS)
- return CS_NO_MORE_ITEMS;
- return get_tuple(handle, tuple, parse);
-}
+ static unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
+ int j;
-static int next_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse)
-{
- if (pcmcia_get_next_tuple(handle, tuple) != CS_SUCCESS)
- return CS_NO_MORE_ITEMS;
- return get_tuple(handle, tuple, parse);
+ if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
+ for (j = 0; j < 5; j++) {
+ p_dev->io.BasePort1 = base[j];
+ p_dev->io.IOAddrLines = base[j] ? 16 : 3;
+ if (!pcmcia_request_io(p_dev, &p_dev->io))
+ return 0;
+ }
+ }
+ return -ENODEV;
}
static int btuart_config(struct pcmcia_device *link)
{
- static unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
btuart_info_t *info = link->priv;
- tuple_t tuple;
- u_short buf[256];
- cisparse_t parse;
- cistpl_cftable_entry_t *cf = &parse.cftable_entry;
- int i, j, try;
+ int i;
+ int try;
- /* First pass: look for a config entry that looks normal. */
- tuple.TupleData = (cisdata_t *) buf;
- tuple.TupleOffset = 0;
- tuple.TupleDataMax = 255;
- tuple.Attributes = 0;
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- /* Two tries: without IO aliases, then with aliases */
- for (try = 0; try < 2; try++) {
- i = first_tuple(link, &tuple, &parse);
- while (i != CS_NO_MORE_ITEMS) {
- if (i != CS_SUCCESS)
- goto next_entry;
- if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
- link->conf.Vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
- if ((cf->io.nwin > 0) && (cf->io.win[0].len == 8) && (cf->io.win[0].base != 0)) {
- link->conf.ConfigIndex = cf->index;
- link->io.BasePort1 = cf->io.win[0].base;
- link->io.IOAddrLines = (try == 0) ? 16 : cf->io.flags & CISTPL_IO_LINES_MASK;
- i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS)
- goto found_port;
- }
-next_entry:
- i = next_tuple(link, &tuple, &parse);
- }
- }
+ /* First pass: look for a config entry that looks normal.
+ Two tries: without IO aliases, then with aliases */
+ for (try = 0; try < 2; try++)
+ if (!pcmcia_loop_config(link, btuart_check_config, &try))
+ goto found_port;
/* Second pass: try to find an entry that isn't picky about
its base address, then try to grab any standard serial port
address, and finally try to get any free port. */
- i = first_tuple(link, &tuple, &parse);
- while (i != CS_NO_MORE_ITEMS) {
- if ((i == CS_SUCCESS) && (cf->io.nwin > 0)
- && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
- link->conf.ConfigIndex = cf->index;
- for (j = 0; j < 5; j++) {
- link->io.BasePort1 = base[j];
- link->io.IOAddrLines = base[j] ? 16 : 3;
- i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS)
- goto found_port;
- }
- }
- i = next_tuple(link, &tuple, &parse);
- }
+ if (!pcmcia_loop_config(link, btuart_check_config_notpicky, NULL))
+ goto found_port;
+
+ BT_ERR("No usable port range found");
+ cs_error(link, RequestIO, -ENODEV);
+ goto failed;
found_port:
- if (i != CS_SUCCESS) {
- BT_ERR("No usable port range found");
- cs_error(link, RequestIO, i);
- goto failed;
- }
-
i = pcmcia_request_irq(link, &link->irq);
if (i != CS_SUCCESS) {
cs_error(link, RequestIRQ, i);
diff --git a/drivers/bluetooth/dtl1_cs.c b/drivers/bluetooth/dtl1_cs.c
index dae45cdf..ec12560 100644
--- a/drivers/bluetooth/dtl1_cs.c
+++ b/drivers/bluetooth/dtl1_cs.c
@@ -590,66 +590,31 @@
kfree(info);
}
-static int get_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse)
+static int dtl1_confcheck(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cf,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
{
- int i;
-
- i = pcmcia_get_tuple_data(handle, tuple);
- if (i != CS_SUCCESS)
- return i;
-
- return pcmcia_parse_tuple(handle, tuple, parse);
-}
-
-static int first_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse)
-{
- if (pcmcia_get_first_tuple(handle, tuple) != CS_SUCCESS)
- return CS_NO_MORE_ITEMS;
- return get_tuple(handle, tuple, parse);
-}
-
-static int next_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse)
-{
- if (pcmcia_get_next_tuple(handle, tuple) != CS_SUCCESS)
- return CS_NO_MORE_ITEMS;
- return get_tuple(handle, tuple, parse);
+ if ((cf->io.nwin == 1) && (cf->io.win[0].len > 8)) {
+ p_dev->io.BasePort1 = cf->io.win[0].base;
+ p_dev->io.NumPorts1 = cf->io.win[0].len; /*yo */
+ p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
+ if (!pcmcia_request_io(p_dev, &p_dev->io))
+ return 0;
+ }
+ return -ENODEV;
}
static int dtl1_config(struct pcmcia_device *link)
{
dtl1_info_t *info = link->priv;
- tuple_t tuple;
- u_short buf[256];
- cisparse_t parse;
- cistpl_cftable_entry_t *cf = &parse.cftable_entry;
int i;
- tuple.TupleData = (cisdata_t *)buf;
- tuple.TupleOffset = 0;
- tuple.TupleDataMax = 255;
- tuple.Attributes = 0;
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
-
/* Look for a generic full-sized window */
link->io.NumPorts1 = 8;
- i = first_tuple(link, &tuple, &parse);
- while (i != CS_NO_MORE_ITEMS) {
- if ((i == CS_SUCCESS) && (cf->io.nwin == 1) && (cf->io.win[0].len > 8)) {
- link->conf.ConfigIndex = cf->index;
- link->io.BasePort1 = cf->io.win[0].base;
- link->io.NumPorts1 = cf->io.win[0].len; /*yo */
- link->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
- i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS)
- break;
- }
- i = next_tuple(link, &tuple, &parse);
- }
-
- if (i != CS_SUCCESS) {
- cs_error(link, RequestIO, i);
+ if (!pcmcia_loop_config(link, dtl1_confcheck, NULL))
goto failed;
- }
i = pcmcia_request_irq(link, &link->irq);
if (i != CS_SUCCESS) {
diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c
index f070ae7..1c5bf9989 100644
--- a/drivers/char/pcmcia/cm4000_cs.c
+++ b/drivers/char/pcmcia/cm4000_cs.c
@@ -1759,65 +1759,40 @@
/*==== Interface to PCMCIA Layer =======================================*/
+static int cm4000_config_check(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cfg,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ if (!cfg->io.nwin)
+ return -ENODEV;
+
+ /* Get the IOaddr */
+ p_dev->io.BasePort1 = cfg->io.win[0].base;
+ p_dev->io.NumPorts1 = cfg->io.win[0].len;
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+ if (!(cfg->io.flags & CISTPL_IO_8BIT))
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+ if (!(cfg->io.flags & CISTPL_IO_16BIT))
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+ p_dev->io.IOAddrLines = cfg->io.flags & CISTPL_IO_LINES_MASK;
+
+ return pcmcia_request_io(p_dev, &p_dev->io);
+}
+
static int cm4000_config(struct pcmcia_device * link, int devno)
{
struct cm4000_dev *dev;
- tuple_t tuple;
- cisparse_t parse;
- u_char buf[64];
- int fail_fn, fail_rc;
- int rc;
/* read the config-tuples */
- tuple.Attributes = 0;
- tuple.TupleData = buf;
- tuple.TupleDataMax = sizeof(buf);
- tuple.TupleOffset = 0;
-
- link->io.BasePort2 = 0;
- link->io.NumPorts2 = 0;
- link->io.Attributes2 = 0;
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- for (rc = pcmcia_get_first_tuple(link, &tuple);
- rc == CS_SUCCESS; rc = pcmcia_get_next_tuple(link, &tuple)) {
-
- rc = pcmcia_get_tuple_data(link, &tuple);
- if (rc != CS_SUCCESS)
- continue;
- rc = pcmcia_parse_tuple(link, &tuple, &parse);
- if (rc != CS_SUCCESS)
- continue;
-
- link->conf.ConfigIndex = parse.cftable_entry.index;
-
- if (!parse.cftable_entry.io.nwin)
- continue;
-
- /* Get the IOaddr */
- link->io.BasePort1 = parse.cftable_entry.io.win[0].base;
- link->io.NumPorts1 = parse.cftable_entry.io.win[0].len;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (!(parse.cftable_entry.io.flags & CISTPL_IO_8BIT))
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(parse.cftable_entry.io.flags & CISTPL_IO_16BIT))
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- link->io.IOAddrLines = parse.cftable_entry.io.flags
- & CISTPL_IO_LINES_MASK;
-
- rc = pcmcia_request_io(link, &link->io);
- if (rc == CS_SUCCESS)
- break; /* we are done */
- }
- if (rc != CS_SUCCESS)
+ if (pcmcia_loop_config(link, cm4000_config_check, NULL))
goto cs_release;
link->conf.IntType = 00000002;
- if ((fail_rc =
- pcmcia_request_configuration(link, &link->conf)) != CS_SUCCESS) {
- fail_fn = RequestConfiguration;
+ if (pcmcia_request_configuration(link, &link->conf))
goto cs_release;
- }
dev = link->priv;
sprintf(dev->node.dev_name, DEVICE_NAME "%d", devno);
diff --git a/drivers/char/pcmcia/cm4040_cs.c b/drivers/char/pcmcia/cm4040_cs.c
index 0b5934b..e047bac 100644
--- a/drivers/char/pcmcia/cm4040_cs.c
+++ b/drivers/char/pcmcia/cm4040_cs.c
@@ -526,65 +526,49 @@
return;
}
+static int cm4040_config_check(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cfg,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ int rc;
+ if (!cfg->io.nwin)
+ return -ENODEV;
+
+ /* Get the IOaddr */
+ p_dev->io.BasePort1 = cfg->io.win[0].base;
+ p_dev->io.NumPorts1 = cfg->io.win[0].len;
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+ if (!(cfg->io.flags & CISTPL_IO_8BIT))
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+ if (!(cfg->io.flags & CISTPL_IO_16BIT))
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+ p_dev->io.IOAddrLines = cfg->io.flags & CISTPL_IO_LINES_MASK;
+
+ rc = pcmcia_request_io(p_dev, &p_dev->io);
+ dev_printk(KERN_INFO, &handle_to_dev(p_dev),
+ "pcmcia_request_io returned 0x%x\n", rc);
+ return rc;
+}
+
+
static int reader_config(struct pcmcia_device *link, int devno)
{
struct reader_dev *dev;
- tuple_t tuple;
- cisparse_t parse;
- u_char buf[64];
- int fail_fn, fail_rc;
- int rc;
-
- tuple.Attributes = 0;
- tuple.TupleData = buf;
- tuple.TupleDataMax = sizeof(buf);
- tuple.TupleOffset = 0;
+ int fail_rc;
link->io.BasePort2 = 0;
link->io.NumPorts2 = 0;
link->io.Attributes2 = 0;
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- for (rc = pcmcia_get_first_tuple(link, &tuple);
- rc == CS_SUCCESS;
- rc = pcmcia_get_next_tuple(link, &tuple)) {
- rc = pcmcia_get_tuple_data(link, &tuple);
- if (rc != CS_SUCCESS)
- continue;
- rc = pcmcia_parse_tuple(link, &tuple, &parse);
- if (rc != CS_SUCCESS)
- continue;
- link->conf.ConfigIndex = parse.cftable_entry.index;
-
- if (!parse.cftable_entry.io.nwin)
- continue;
-
- link->io.BasePort1 = parse.cftable_entry.io.win[0].base;
- link->io.NumPorts1 = parse.cftable_entry.io.win[0].len;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (!(parse.cftable_entry.io.flags & CISTPL_IO_8BIT))
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(parse.cftable_entry.io.flags & CISTPL_IO_16BIT))
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- link->io.IOAddrLines = parse.cftable_entry.io.flags
- & CISTPL_IO_LINES_MASK;
- rc = pcmcia_request_io(link, &link->io);
-
- dev_printk(KERN_INFO, &handle_to_dev(link), "foo");
- if (rc == CS_SUCCESS)
- break;
- else
- dev_printk(KERN_INFO, &handle_to_dev(link),
- "pcmcia_request_io failed 0x%x\n", rc);
- }
- if (rc != CS_SUCCESS)
+ if (pcmcia_loop_config(link, cm4040_config_check, NULL))
goto cs_release;
link->conf.IntType = 00000002;
if ((fail_rc = pcmcia_request_configuration(link,&link->conf))
!=CS_SUCCESS) {
- fail_fn = RequestConfiguration;
dev_printk(KERN_INFO, &handle_to_dev(link),
"pcmcia_request_configuration failed 0x%x\n",
fail_rc);
diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c
index 21bfac1..fe20cdb 100644
--- a/drivers/ide/legacy/ide-cs.c
+++ b/drivers/ide/legacy/ide-cs.c
@@ -220,103 +220,91 @@
#define CS_CHECK(fn, ret) \
do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
+struct pcmcia_config_check {
+ unsigned long ctl_base;
+ int skip_vcc;
+ int is_kme;
+};
+
+static int pcmcia_check_one_config(struct pcmcia_device *pdev,
+ cistpl_cftable_entry_t *cfg,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ struct pcmcia_config_check *stk = priv_data;
+
+ /* Check for matching Vcc, unless we're desperate */
+ if (!stk->skip_vcc) {
+ if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+ if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000)
+ return -ENODEV;
+ } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+ if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000)
+ return -ENODEV;
+ }
+ }
+
+ if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
+ pdev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+ else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM))
+ pdev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+
+ if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+ cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
+ pdev->conf.ConfigIndex = cfg->index;
+ pdev->io.BasePort1 = io->win[0].base;
+ pdev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
+ if (!(io->flags & CISTPL_IO_16BIT))
+ pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+ if (io->nwin == 2) {
+ pdev->io.NumPorts1 = 8;
+ pdev->io.BasePort2 = io->win[1].base;
+ pdev->io.NumPorts2 = (stk->is_kme) ? 2 : 1;
+ if (pcmcia_request_io(pdev, &pdev->io) != 0)
+ return -ENODEV;
+ stk->ctl_base = pdev->io.BasePort2;
+ } else if ((io->nwin == 1) && (io->win[0].len >= 16)) {
+ pdev->io.NumPorts1 = io->win[0].len;
+ pdev->io.NumPorts2 = 0;
+ if (pcmcia_request_io(pdev, &pdev->io) != 0)
+ return -ENODEV;
+ stk->ctl_base = pdev->io.BasePort1 + 0x0e;
+ } else
+ return -ENODEV;
+ /* If we've got this far, we're done */
+ return 0;
+ }
+ return -ENODEV;
+}
+
static int ide_config(struct pcmcia_device *link)
{
ide_info_t *info = link->priv;
- tuple_t tuple;
- struct {
- u_short buf[128];
- cisparse_t parse;
- config_info_t conf;
- cistpl_cftable_entry_t dflt;
- } *stk = NULL;
- cistpl_cftable_entry_t *cfg;
- int pass, last_ret = 0, last_fn = 0, is_kme = 0;
+ struct pcmcia_config_check *stk = NULL;
+ int last_ret = 0, last_fn = 0, is_kme = 0;
unsigned long io_base, ctl_base;
struct ide_host *host;
DEBUG(0, "ide_config(0x%p)\n", link);
- stk = kzalloc(sizeof(*stk), GFP_KERNEL);
- if (!stk) goto err_mem;
- cfg = &stk->parse.cftable_entry;
-
- tuple.TupleData = (cisdata_t *)&stk->buf;
- tuple.TupleOffset = 0;
- tuple.TupleDataMax = 255;
- tuple.Attributes = 0;
-
is_kme = ((link->manf_id == MANFID_KME) &&
((link->card_id == PRODID_KME_KXLC005_A) ||
(link->card_id == PRODID_KME_KXLC005_B)));
- /* Not sure if this is right... look up the current Vcc */
- CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(link, &stk->conf));
+ stk = kzalloc(sizeof(*stk), GFP_KERNEL);
+ if (!stk)
+ goto err_mem;
+ stk->is_kme = is_kme;
+ stk->skip_vcc = io_base = ctl_base = 0;
- pass = io_base = ctl_base = 0;
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- tuple.Attributes = 0;
- CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
- while (1) {
- if (pcmcia_get_tuple_data(link, &tuple) != 0) goto next_entry;
- if (pcmcia_parse_tuple(link, &tuple, &stk->parse) != 0) goto next_entry;
-
- /* Check for matching Vcc, unless we're desperate */
- if (!pass) {
- if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
- if (stk->conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000)
- goto next_entry;
- } else if (stk->dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) {
- if (stk->conf.Vcc != stk->dflt.vcc.param[CISTPL_POWER_VNOM] / 10000)
- goto next_entry;
- }
- }
-
- if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
- link->conf.Vpp =
- cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
- else if (stk->dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
- link->conf.Vpp =
- stk->dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
-
- if ((cfg->io.nwin > 0) || (stk->dflt.io.nwin > 0)) {
- cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &stk->dflt.io;
- link->conf.ConfigIndex = cfg->index;
- link->io.BasePort1 = io->win[0].base;
- link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
- if (!(io->flags & CISTPL_IO_16BIT))
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- if (io->nwin == 2) {
- link->io.NumPorts1 = 8;
- link->io.BasePort2 = io->win[1].base;
- link->io.NumPorts2 = (is_kme) ? 2 : 1;
- if (pcmcia_request_io(link, &link->io) != 0)
- goto next_entry;
- io_base = link->io.BasePort1;
- ctl_base = link->io.BasePort2;
- } else if ((io->nwin == 1) && (io->win[0].len >= 16)) {
- link->io.NumPorts1 = io->win[0].len;
- link->io.NumPorts2 = 0;
- if (pcmcia_request_io(link, &link->io) != 0)
- goto next_entry;
- io_base = link->io.BasePort1;
- ctl_base = link->io.BasePort1 + 0x0e;
- } else goto next_entry;
- /* If we've got this far, we're done */
- break;
- }
-
- next_entry:
- if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
- memcpy(&stk->dflt, cfg, sizeof(stk->dflt));
- if (pass) {
- CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple));
- } else if (pcmcia_get_next_tuple(link, &tuple) != 0) {
- CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
- memset(&stk->dflt, 0, sizeof(stk->dflt));
- pass++;
- }
+ if (pcmcia_loop_config(link, pcmcia_check_one_config, stk)) {
+ stk->skip_vcc = 1;
+ if (pcmcia_loop_config(link, pcmcia_check_one_config, stk))
+ goto failed; /* No suitable config found */
}
+ io_base = link->io.BasePort1;
+ ctl_base = stk->ctl_base;
CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
@@ -404,8 +392,10 @@
PCMCIA_DEVICE_MANF_CARD(0x000a, 0x0000), /* I-O Data CFA */
PCMCIA_DEVICE_MANF_CARD(0x001c, 0x0001), /* Mitsubishi CFA */
PCMCIA_DEVICE_MANF_CARD(0x0032, 0x0704),
+ PCMCIA_DEVICE_MANF_CARD(0x0032, 0x2904),
PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401), /* SanDisk CFA */
PCMCIA_DEVICE_MANF_CARD(0x004f, 0x0000), /* Kingston */
+ PCMCIA_DEVICE_MANF_CARD(0x0097, 0x1620), /* TI emulated */
PCMCIA_DEVICE_MANF_CARD(0x0098, 0x0000), /* Toshiba */
PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x002d),
PCMCIA_DEVICE_MANF_CARD(0x00ce, 0x0000), /* Samsung */
diff --git a/drivers/isdn/hardware/avm/avm_cs.c b/drivers/isdn/hardware/avm/avm_cs.c
index a5b941c..3880465 100644
--- a/drivers/isdn/hardware/avm/avm_cs.c
+++ b/drivers/isdn/hardware/avm/avm_cs.c
@@ -154,78 +154,45 @@
======================================================================*/
-static int get_tuple(struct pcmcia_device *handle, tuple_t *tuple,
- cisparse_t *parse)
+static int avmcs_configcheck(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cf,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
{
- int i = pcmcia_get_tuple_data(handle, tuple);
- if (i != CS_SUCCESS) return i;
- return pcmcia_parse_tuple(handle, tuple, parse);
-}
+ if (cf->io.nwin <= 0)
+ return -ENODEV;
-static int first_tuple(struct pcmcia_device *handle, tuple_t *tuple,
- cisparse_t *parse)
-{
- int i = pcmcia_get_first_tuple(handle, tuple);
- if (i != CS_SUCCESS) return i;
- return get_tuple(handle, tuple, parse);
-}
-
-static int next_tuple(struct pcmcia_device *handle, tuple_t *tuple,
- cisparse_t *parse)
-{
- int i = pcmcia_get_next_tuple(handle, tuple);
- if (i != CS_SUCCESS) return i;
- return get_tuple(handle, tuple, parse);
+ p_dev->io.BasePort1 = cf->io.win[0].base;
+ p_dev->io.NumPorts1 = cf->io.win[0].len;
+ p_dev->io.NumPorts2 = 0;
+ printk(KERN_INFO "avm_cs: testing i/o %#x-%#x\n",
+ p_dev->io.BasePort1,
+ p_dev->io.BasePort1+p_dev->io.NumPorts1-1);
+ return pcmcia_request_io(p_dev, &p_dev->io);
}
static int avmcs_config(struct pcmcia_device *link)
{
- tuple_t tuple;
- cisparse_t parse;
- cistpl_cftable_entry_t *cf = &parse.cftable_entry;
local_info_t *dev;
int i;
- u_char buf[64];
char devname[128];
int cardtype;
int (*addcard)(unsigned int port, unsigned irq);
dev = link->priv;
+ devname[0] = 0;
+ if (link->prod_id[1])
+ strlcpy(devname, link->prod_id[1], sizeof(devname));
+
+ /*
+ * find IO port
+ */
+ if (pcmcia_loop_config(link, avmcs_configcheck, NULL))
+ return -ENODEV;
+
do {
- devname[0] = 0;
- if (link->prod_id[1])
- strlcpy(devname, link->prod_id[1], sizeof(devname));
-
- /*
- * find IO port
- */
- tuple.TupleData = (cisdata_t *)buf;
- tuple.TupleOffset = 0; tuple.TupleDataMax = 255;
- tuple.Attributes = 0;
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- i = first_tuple(link, &tuple, &parse);
- while (i == CS_SUCCESS) {
- if (cf->io.nwin > 0) {
- link->conf.ConfigIndex = cf->index;
- link->io.BasePort1 = cf->io.win[0].base;
- link->io.NumPorts1 = cf->io.win[0].len;
- link->io.NumPorts2 = 0;
- printk(KERN_INFO "avm_cs: testing i/o %#x-%#x\n",
- link->io.BasePort1,
- link->io.BasePort1+link->io.NumPorts1-1);
- i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS) goto found_port;
- }
- i = next_tuple(link, &tuple, &parse);
- }
-
-found_port:
- if (i != CS_SUCCESS) {
- cs_error(link, RequestIO, i);
- break;
- }
-
/*
* allocate an interrupt line
*/
diff --git a/drivers/isdn/hisax/avma1_cs.c b/drivers/isdn/hisax/avma1_cs.c
index fc6cc2c..8fd3ca0 100644
--- a/drivers/isdn/hisax/avma1_cs.c
+++ b/drivers/isdn/hisax/avma1_cs.c
@@ -174,38 +174,29 @@
======================================================================*/
-static int get_tuple(struct pcmcia_device *handle, tuple_t *tuple,
- cisparse_t *parse)
+static int avma1cs_configcheck(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cf,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
{
- int i = pcmcia_get_tuple_data(handle, tuple);
- if (i != CS_SUCCESS) return i;
- return pcmcia_parse_tuple(handle, tuple, parse);
+ if (cf->io.nwin <= 0)
+ return -ENODEV;
+
+ p_dev->io.BasePort1 = cf->io.win[0].base;
+ p_dev->io.NumPorts1 = cf->io.win[0].len;
+ p_dev->io.NumPorts2 = 0;
+ printk(KERN_INFO "avma1_cs: testing i/o %#x-%#x\n",
+ p_dev->io.BasePort1,
+ p_dev->io.BasePort1+p_dev->io.NumPorts1-1);
+ return pcmcia_request_io(p_dev, &p_dev->io);
}
-static int first_tuple(struct pcmcia_device *handle, tuple_t *tuple,
- cisparse_t *parse)
-{
- int i = pcmcia_get_first_tuple(handle, tuple);
- if (i != CS_SUCCESS) return i;
- return get_tuple(handle, tuple, parse);
-}
-
-static int next_tuple(struct pcmcia_device *handle, tuple_t *tuple,
- cisparse_t *parse)
-{
- int i = pcmcia_get_next_tuple(handle, tuple);
- if (i != CS_SUCCESS) return i;
- return get_tuple(handle, tuple, parse);
-}
static int avma1cs_config(struct pcmcia_device *link)
{
- tuple_t tuple;
- cisparse_t parse;
- cistpl_cftable_entry_t *cf = &parse.cftable_entry;
local_info_t *dev;
int i;
- u_char buf[64];
char devname[128];
IsdnCard_t icard;
int busy = 0;
@@ -214,40 +205,14 @@
DEBUG(0, "avma1cs_config(0x%p)\n", link);
+ devname[0] = 0;
+ if (link->prod_id[1])
+ strlcpy(devname, link->prod_id[1], sizeof(devname));
+
+ if (pcmcia_loop_config(link, avma1cs_configcheck, NULL))
+ return -ENODEV;
+
do {
- devname[0] = 0;
- if (link->prod_id[1])
- strlcpy(devname, link->prod_id[1], sizeof(devname));
-
- /*
- * find IO port
- */
- tuple.TupleData = (cisdata_t *)buf;
- tuple.TupleOffset = 0; tuple.TupleDataMax = 255;
- tuple.Attributes = 0;
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- i = first_tuple(link, &tuple, &parse);
- while (i == CS_SUCCESS) {
- if (cf->io.nwin > 0) {
- link->conf.ConfigIndex = cf->index;
- link->io.BasePort1 = cf->io.win[0].base;
- link->io.NumPorts1 = cf->io.win[0].len;
- link->io.NumPorts2 = 0;
- printk(KERN_INFO "avma1_cs: testing i/o %#x-%#x\n",
- link->io.BasePort1,
- link->io.BasePort1+link->io.NumPorts1 - 1);
- i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS) goto found_port;
- }
- i = next_tuple(link, &tuple, &parse);
- }
-
-found_port:
- if (i != CS_SUCCESS) {
- cs_error(link, RequestIO, i);
- break;
- }
-
/*
* allocate an interrupt line
*/
diff --git a/drivers/isdn/hisax/elsa_cs.c b/drivers/isdn/hisax/elsa_cs.c
index db7e644..2bf0016 100644
--- a/drivers/isdn/hisax/elsa_cs.c
+++ b/drivers/isdn/hisax/elsa_cs.c
@@ -203,68 +203,41 @@
device available to the system.
======================================================================*/
-static int get_tuple(struct pcmcia_device *handle, tuple_t *tuple,
- cisparse_t *parse)
-{
- int i = pcmcia_get_tuple_data(handle, tuple);
- if (i != CS_SUCCESS) return i;
- return pcmcia_parse_tuple(handle, tuple, parse);
-}
-static int first_tuple(struct pcmcia_device *handle, tuple_t *tuple,
- cisparse_t *parse)
+static int elsa_cs_configcheck(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cf,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
{
- int i = pcmcia_get_first_tuple(handle, tuple);
- if (i != CS_SUCCESS) return i;
- return get_tuple(handle, tuple, parse);
-}
+ int j;
-static int next_tuple(struct pcmcia_device *handle, tuple_t *tuple,
- cisparse_t *parse)
-{
- int i = pcmcia_get_next_tuple(handle, tuple);
- if (i != CS_SUCCESS) return i;
- return get_tuple(handle, tuple, parse);
+ if ((cf->io.nwin > 0) && cf->io.win[0].base) {
+ printk(KERN_INFO "(elsa_cs: looks like the 96 model)\n");
+ p_dev->io.BasePort1 = cf->io.win[0].base;
+ if (!pcmcia_request_io(p_dev, &p_dev->io))
+ return 0;
+ } else {
+ printk(KERN_INFO "(elsa_cs: looks like the 97 model)\n");
+ for (j = 0x2f0; j > 0x100; j -= 0x10) {
+ p_dev->io.BasePort1 = j;
+ if (!pcmcia_request_io(p_dev, &p_dev->io))
+ return 0;
+ }
+ }
+ return -ENODEV;
}
static int elsa_cs_config(struct pcmcia_device *link)
{
- tuple_t tuple;
- cisparse_t parse;
local_info_t *dev;
- int i, j, last_fn;
- u_short buf[128];
- cistpl_cftable_entry_t *cf = &parse.cftable_entry;
+ int i, last_fn;
IsdnCard_t icard;
DEBUG(0, "elsa_config(0x%p)\n", link);
dev = link->priv;
- tuple.TupleData = (cisdata_t *)buf;
- tuple.TupleOffset = 0; tuple.TupleDataMax = 255;
- tuple.Attributes = 0;
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- i = first_tuple(link, &tuple, &parse);
- while (i == CS_SUCCESS) {
- if ( (cf->io.nwin > 0) && cf->io.win[0].base) {
- printk(KERN_INFO "(elsa_cs: looks like the 96 model)\n");
- link->conf.ConfigIndex = cf->index;
- link->io.BasePort1 = cf->io.win[0].base;
- i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS) break;
- } else {
- printk(KERN_INFO "(elsa_cs: looks like the 97 model)\n");
- link->conf.ConfigIndex = cf->index;
- for (i = 0, j = 0x2f0; j > 0x100; j -= 0x10) {
- link->io.BasePort1 = j;
- i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS) break;
- }
- break;
- }
- i = next_tuple(link, &tuple, &parse);
- }
-
+ i = pcmcia_loop_config(link, elsa_cs_configcheck, NULL);
if (i != CS_SUCCESS) {
last_fn = RequestIO;
goto cs_failed;
diff --git a/drivers/isdn/hisax/sedlbauer_cs.c b/drivers/isdn/hisax/sedlbauer_cs.c
index 439cb53..9a3c9f5 100644
--- a/drivers/isdn/hisax/sedlbauer_cs.c
+++ b/drivers/isdn/hisax/sedlbauer_cs.c
@@ -217,101 +217,61 @@
#define CS_CHECK(fn, ret) \
do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-static int sedlbauer_config(struct pcmcia_device *link)
+static int sedlbauer_config_check(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cfg,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
{
- local_info_t *dev = link->priv;
- tuple_t tuple;
- cisparse_t parse;
- int last_fn, last_ret;
- u8 buf[64];
- config_info_t conf;
- win_req_t req;
- memreq_t map;
- IsdnCard_t icard;
+ win_req_t *req = priv_data;
- DEBUG(0, "sedlbauer_config(0x%p)\n", link);
+ if (cfg->index == 0)
+ return -ENODEV;
- tuple.Attributes = 0;
- tuple.TupleData = buf;
- tuple.TupleDataMax = sizeof(buf);
- tuple.TupleOffset = 0;
-
- CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(link, &conf));
-
- /*
- In this loop, we scan the CIS for configuration table entries,
- each of which describes a valid card configuration, including
- voltage, IO window, memory window, and interrupt settings.
-
- We make no assumptions about the card to be configured: we use
- just the information available in the CIS. In an ideal world,
- this would work for any PCMCIA card, but it requires a complete
- and accurate CIS. In practice, a driver usually "knows" most of
- these things without consulting the CIS, and most client drivers
- will only use the CIS to fill in implementation-defined details.
- */
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
- while (1) {
- cistpl_cftable_entry_t dflt = { 0 };
- cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
- if (pcmcia_get_tuple_data(link, &tuple) != 0 ||
- pcmcia_parse_tuple(link, &tuple, &parse) != 0)
- goto next_entry;
-
- if (cfg->flags & CISTPL_CFTABLE_DEFAULT) dflt = *cfg;
- if (cfg->index == 0) goto next_entry;
- link->conf.ConfigIndex = cfg->index;
-
/* Does this card need audio output? */
if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
- link->conf.Attributes |= CONF_ENABLE_SPKR;
- link->conf.Status = CCSR_AUDIO_ENA;
+ p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
+ p_dev->conf.Status = CCSR_AUDIO_ENA;
}
-
+
/* Use power settings for Vcc and Vpp if present */
/* Note that the CIS values need to be rescaled */
if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM)) {
- if (conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM]/10000)
- goto next_entry;
- } else if (dflt.vcc.present & (1<<CISTPL_POWER_VNOM)) {
- if (conf.Vcc != dflt.vcc.param[CISTPL_POWER_VNOM]/10000)
- goto next_entry;
+ if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM]/10000)
+ return -ENODEV;
+ } else if (dflt->vcc.present & (1<<CISTPL_POWER_VNOM)) {
+ if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM]/10000)
+ return -ENODEV;
}
-
+
if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
- link->conf.Vpp =
- cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
- else if (dflt.vpp1.present & (1<<CISTPL_POWER_VNOM))
- link->conf.Vpp =
- dflt.vpp1.param[CISTPL_POWER_VNOM]/10000;
-
+ p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
+ else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM))
+ p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000;
+
/* Do we need to allocate an interrupt? */
- if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1)
- link->conf.Attributes |= CONF_ENABLE_IRQ;
-
+ if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
+ p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+
/* IO window settings */
- link->io.NumPorts1 = link->io.NumPorts2 = 0;
- if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
- cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (!(io->flags & CISTPL_IO_8BIT))
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(io->flags & CISTPL_IO_16BIT))
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-/* new in dummy.cs 2001/01/28 MN
- link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
-*/
- link->io.BasePort1 = io->win[0].base;
- link->io.NumPorts1 = io->win[0].len;
- if (io->nwin > 1) {
- link->io.Attributes2 = link->io.Attributes1;
- link->io.BasePort2 = io->win[1].base;
- link->io.NumPorts2 = io->win[1].len;
- }
- /* This reserves IO space but doesn't actually enable it */
- if (pcmcia_request_io(link, &link->io) != 0)
- goto next_entry;
+ p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+ if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+ cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+ if (!(io->flags & CISTPL_IO_8BIT))
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+ if (!(io->flags & CISTPL_IO_16BIT))
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+ p_dev->io.BasePort1 = io->win[0].base;
+ p_dev->io.NumPorts1 = io->win[0].len;
+ if (io->nwin > 1) {
+ p_dev->io.Attributes2 = p_dev->io.Attributes1;
+ p_dev->io.BasePort2 = io->win[1].base;
+ p_dev->io.NumPorts2 = io->win[1].len;
+ }
+ /* This reserves IO space but doesn't actually enable it */
+ if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+ return -ENODEV;
}
/*
@@ -325,30 +285,54 @@
needs to be mapped to virtual space with ioremap() before it
is used.
*/
- if ((cfg->mem.nwin > 0) || (dflt.mem.nwin > 0)) {
- cistpl_mem_t *mem =
- (cfg->mem.nwin) ? &cfg->mem : &dflt.mem;
- req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM;
- req.Attributes |= WIN_ENABLE;
- req.Base = mem->win[0].host_addr;
- req.Size = mem->win[0].len;
-/* new in dummy.cs 2001/01/28 MN
- if (req.Size < 0x1000)
- req.Size = 0x1000;
-*/
- req.AccessSpeed = 0;
- if (pcmcia_request_window(&link, &req, &link->win) != 0)
- goto next_entry;
- map.Page = 0; map.CardOffset = mem->win[0].card_addr;
- if (pcmcia_map_mem_page(link->win, &map) != 0)
- goto next_entry;
+ if ((cfg->mem.nwin > 0) || (dflt->mem.nwin > 0)) {
+ cistpl_mem_t *mem = (cfg->mem.nwin) ? &cfg->mem : &dflt->mem;
+ memreq_t map;
+ req->Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM;
+ req->Attributes |= WIN_ENABLE;
+ req->Base = mem->win[0].host_addr;
+ req->Size = mem->win[0].len;
+ req->AccessSpeed = 0;
+ if (pcmcia_request_window(&p_dev, req, &p_dev->win) != 0)
+ return -ENODEV;
+ map.Page = 0;
+ map.CardOffset = mem->win[0].card_addr;
+ if (pcmcia_map_mem_page(p_dev->win, &map) != 0)
+ return -ENODEV;
}
- /* If we got this far, we're cool! */
- break;
+ return 0;
+}
- next_entry:
- CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple));
- }
+
+
+static int sedlbauer_config(struct pcmcia_device *link)
+{
+ local_info_t *dev = link->priv;
+ win_req_t *req;
+ int last_fn, last_ret;
+ IsdnCard_t icard;
+
+ DEBUG(0, "sedlbauer_config(0x%p)\n", link);
+
+ req = kzalloc(sizeof(win_req_t), GFP_KERNEL);
+ if (!req)
+ return -ENOMEM;
+
+ /*
+ In this loop, we scan the CIS for configuration table entries,
+ each of which describes a valid card configuration, including
+ voltage, IO window, memory window, and interrupt settings.
+
+ We make no assumptions about the card to be configured: we use
+ just the information available in the CIS. In an ideal world,
+ this would work for any PCMCIA card, but it requires a complete
+ and accurate CIS. In practice, a driver usually "knows" most of
+ these things without consulting the CIS, and most client drivers
+ will only use the CIS to fill in implementation-defined details.
+ */
+ last_ret = pcmcia_loop_config(link, sedlbauer_config_check, req);
+ if (last_ret)
+ goto failed;
/*
Allocate an interrupt line. Note that this does not assign a
@@ -387,8 +371,8 @@
printk(" & 0x%04x-0x%04x", link->io.BasePort2,
link->io.BasePort2+link->io.NumPorts2-1);
if (link->win)
- printk(", mem 0x%06lx-0x%06lx", req.Base,
- req.Base+req.Size-1);
+ printk(", mem 0x%06lx-0x%06lx", req->Base,
+ req->Base+req->Size-1);
printk("\n");
icard.para[0] = link->irq.AssignedIRQ;
@@ -409,6 +393,7 @@
cs_failed:
cs_error(link, last_fn, last_ret);
+failed:
sedlbauer_release(link);
return -ENODEV;
diff --git a/drivers/isdn/hisax/teles_cs.c b/drivers/isdn/hisax/teles_cs.c
index ab4bd45..21cabd0 100644
--- a/drivers/isdn/hisax/teles_cs.c
+++ b/drivers/isdn/hisax/teles_cs.c
@@ -193,68 +193,41 @@
device available to the system.
======================================================================*/
-static int get_tuple(struct pcmcia_device *handle, tuple_t *tuple,
- cisparse_t *parse)
-{
- int i = pcmcia_get_tuple_data(handle, tuple);
- if (i != CS_SUCCESS) return i;
- return pcmcia_parse_tuple(handle, tuple, parse);
-}
-static int first_tuple(struct pcmcia_device *handle, tuple_t *tuple,
- cisparse_t *parse)
+static int teles_cs_configcheck(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cf,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
{
- int i = pcmcia_get_first_tuple(handle, tuple);
- if (i != CS_SUCCESS) return i;
- return get_tuple(handle, tuple, parse);
-}
+ int j;
-static int next_tuple(struct pcmcia_device *handle, tuple_t *tuple,
- cisparse_t *parse)
-{
- int i = pcmcia_get_next_tuple(handle, tuple);
- if (i != CS_SUCCESS) return i;
- return get_tuple(handle, tuple, parse);
+ if ((cf->io.nwin > 0) && cf->io.win[0].base) {
+ printk(KERN_INFO "(teles_cs: looks like the 96 model)\n");
+ p_dev->io.BasePort1 = cf->io.win[0].base;
+ if (!pcmcia_request_io(p_dev, &p_dev->io))
+ return 0;
+ } else {
+ printk(KERN_INFO "(teles_cs: looks like the 97 model)\n");
+ for (j = 0x2f0; j > 0x100; j -= 0x10) {
+ p_dev->io.BasePort1 = j;
+ if (!pcmcia_request_io(p_dev, &p_dev->io))
+ return 0;
+ }
+ }
+ return -ENODEV;
}
static int teles_cs_config(struct pcmcia_device *link)
{
- tuple_t tuple;
- cisparse_t parse;
local_info_t *dev;
- int i, j, last_fn;
- u_short buf[128];
- cistpl_cftable_entry_t *cf = &parse.cftable_entry;
+ int i, last_fn;
IsdnCard_t icard;
DEBUG(0, "teles_config(0x%p)\n", link);
dev = link->priv;
- tuple.TupleData = (cisdata_t *)buf;
- tuple.TupleOffset = 0; tuple.TupleDataMax = 255;
- tuple.Attributes = 0;
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- i = first_tuple(link, &tuple, &parse);
- while (i == CS_SUCCESS) {
- if ( (cf->io.nwin > 0) && cf->io.win[0].base) {
- printk(KERN_INFO "(teles_cs: looks like the 96 model)\n");
- link->conf.ConfigIndex = cf->index;
- link->io.BasePort1 = cf->io.win[0].base;
- i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS) break;
- } else {
- printk(KERN_INFO "(teles_cs: looks like the 97 model)\n");
- link->conf.ConfigIndex = cf->index;
- for (i = 0, j = 0x2f0; j > 0x100; j -= 0x10) {
- link->io.BasePort1 = j;
- i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS) break;
- }
- break;
- }
- i = next_tuple(link, &tuple, &parse);
- }
-
+ i = pcmcia_loop_config(link, teles_cs_configcheck, NULL);
if (i != CS_SUCCESS) {
last_fn = RequestIO;
goto cs_failed;
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index 3f682d4..061d889 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -284,58 +284,49 @@
}
}
+static int axnet_configcheck(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cfg,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ int i;
+ cistpl_io_t *io = &cfg->io;
+
+ if (cfg->index == 0 || cfg->io.nwin == 0)
+ return -ENODEV;
+
+ p_dev->conf.ConfigIndex = 0x05;
+ /* For multifunction cards, by convention, we configure the
+ network function with window 0, and serial with window 1 */
+ if (io->nwin > 1) {
+ i = (io->win[1].len > io->win[0].len);
+ p_dev->io.BasePort2 = io->win[1-i].base;
+ p_dev->io.NumPorts2 = io->win[1-i].len;
+ } else {
+ i = p_dev->io.NumPorts2 = 0;
+ }
+ p_dev->io.BasePort1 = io->win[i].base;
+ p_dev->io.NumPorts1 = io->win[i].len;
+ p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
+ if (p_dev->io.NumPorts1 + p_dev->io.NumPorts2 >= 32)
+ return try_io_port(p_dev);
+
+ return -ENODEV;
+}
+
static int axnet_config(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
axnet_dev_t *info = PRIV(dev);
- tuple_t tuple;
- cisparse_t parse;
int i, j, last_ret, last_fn;
- u_short buf[64];
DECLARE_MAC_BUF(mac);
DEBUG(0, "axnet_config(0x%p)\n", link);
- tuple.Attributes = 0;
- tuple.TupleData = (cisdata_t *)buf;
- tuple.TupleDataMax = sizeof(buf);
- tuple.TupleOffset = 0;
-
/* don't trust the CIS on this; Linksys got it wrong */
link->conf.Present = 0x63;
-
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- tuple.Attributes = 0;
- CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
- while (last_ret == CS_SUCCESS) {
- cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
- cistpl_io_t *io = &(parse.cftable_entry.io);
-
- if (pcmcia_get_tuple_data(link, &tuple) != 0 ||
- pcmcia_parse_tuple(link, &tuple, &parse) != 0 ||
- cfg->index == 0 || cfg->io.nwin == 0)
- goto next_entry;
-
- link->conf.ConfigIndex = 0x05;
- /* For multifunction cards, by convention, we configure the
- network function with window 0, and serial with window 1 */
- if (io->nwin > 1) {
- i = (io->win[1].len > io->win[0].len);
- link->io.BasePort2 = io->win[1-i].base;
- link->io.NumPorts2 = io->win[1-i].len;
- } else {
- i = link->io.NumPorts2 = 0;
- }
- link->io.BasePort1 = io->win[i].base;
- link->io.NumPorts1 = io->win[i].len;
- link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
- if (link->io.NumPorts1 + link->io.NumPorts2 >= 32) {
- last_ret = try_io_port(link);
- if (last_ret == CS_SUCCESS) break;
- }
- next_entry:
- last_ret = pcmcia_get_next_tuple(link, &tuple);
- }
+ last_ret = pcmcia_loop_config(link, axnet_configcheck, NULL);
if (last_ret != CS_SUCCESS) {
cs_error(link, RequestIO, last_ret);
goto failed;
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index 2d4c4ad..aa17434 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -512,58 +512,53 @@
}
}
+static int pcnet_confcheck(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cfg,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ int *has_shmem = priv_data;
+ int i;
+ cistpl_io_t *io = &cfg->io;
+
+ if (cfg->index == 0 || cfg->io.nwin == 0)
+ return -EINVAL;
+
+ /* For multifunction cards, by convention, we configure the
+ network function with window 0, and serial with window 1 */
+ if (io->nwin > 1) {
+ i = (io->win[1].len > io->win[0].len);
+ p_dev->io.BasePort2 = io->win[1-i].base;
+ p_dev->io.NumPorts2 = io->win[1-i].len;
+ } else {
+ i = p_dev->io.NumPorts2 = 0;
+ }
+
+ *has_shmem = ((cfg->mem.nwin == 1) &&
+ (cfg->mem.win[0].len >= 0x4000));
+ p_dev->io.BasePort1 = io->win[i].base;
+ p_dev->io.NumPorts1 = io->win[i].len;
+ p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
+ if (p_dev->io.NumPorts1 + p_dev->io.NumPorts2 >= 32)
+ return try_io_port(p_dev);
+
+ return 0;
+}
+
static int pcnet_config(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
pcnet_dev_t *info = PRIV(dev);
- tuple_t tuple;
- cisparse_t parse;
- int i, last_ret, last_fn, start_pg, stop_pg, cm_offset;
+ int last_ret, last_fn, start_pg, stop_pg, cm_offset;
int has_shmem = 0;
- u_short buf[64];
hw_info_t *local_hw_info;
DECLARE_MAC_BUF(mac);
DEBUG(0, "pcnet_config(0x%p)\n", link);
- tuple.TupleData = (cisdata_t *)buf;
- tuple.TupleDataMax = sizeof(buf);
- tuple.TupleOffset = 0;
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- tuple.Attributes = 0;
- CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
- while (last_ret == CS_SUCCESS) {
- cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
- cistpl_io_t *io = &(parse.cftable_entry.io);
-
- if (pcmcia_get_tuple_data(link, &tuple) != 0 ||
- pcmcia_parse_tuple(link, &tuple, &parse) != 0 ||
- cfg->index == 0 || cfg->io.nwin == 0)
- goto next_entry;
-
- link->conf.ConfigIndex = cfg->index;
- /* For multifunction cards, by convention, we configure the
- network function with window 0, and serial with window 1 */
- if (io->nwin > 1) {
- i = (io->win[1].len > io->win[0].len);
- link->io.BasePort2 = io->win[1-i].base;
- link->io.NumPorts2 = io->win[1-i].len;
- } else {
- i = link->io.NumPorts2 = 0;
- }
- has_shmem = ((cfg->mem.nwin == 1) &&
- (cfg->mem.win[0].len >= 0x4000));
- link->io.BasePort1 = io->win[i].base;
- link->io.NumPorts1 = io->win[i].len;
- link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
- if (link->io.NumPorts1 + link->io.NumPorts2 >= 32) {
- last_ret = try_io_port(link);
- if (last_ret == CS_SUCCESS) break;
- }
- next_entry:
- last_ret = pcmcia_get_next_tuple(link, &tuple);
- }
- if (last_ret != CS_SUCCESS) {
+ last_ret = pcmcia_loop_config(link, pcnet_confcheck, &has_shmem);
+ if (last_ret) {
cs_error(link, RequestIO, last_ret);
goto failed;
}
diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c
index 250eb19..b3f2085 100644
--- a/drivers/net/pcmcia/smc91c92_cs.c
+++ b/drivers/net/pcmcia/smc91c92_cs.c
@@ -459,28 +459,37 @@
return 0;
}
+static int mhz_mfc_config_check(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cf,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ int k;
+ p_dev->io.BasePort2 = cf->io.win[0].base;
+ for (k = 0; k < 0x400; k += 0x10) {
+ if (k & 0x80)
+ continue;
+ p_dev->io.BasePort1 = k ^ 0x300;
+ if (!pcmcia_request_io(p_dev, &p_dev->io))
+ return 0;
+ }
+ return -ENODEV;
+}
+
static int mhz_mfc_config(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
struct smc_private *smc = netdev_priv(dev);
struct smc_cfg_mem *cfg_mem;
- tuple_t *tuple;
- cisparse_t *parse;
- cistpl_cftable_entry_t *cf;
- u_char *buf;
win_req_t req;
memreq_t mem;
- int i, k;
+ int i;
cfg_mem = kmalloc(sizeof(struct smc_cfg_mem), GFP_KERNEL);
if (!cfg_mem)
return CS_OUT_OF_RESOURCE;
- tuple = &cfg_mem->tuple;
- parse = &cfg_mem->parse;
- cf = &parse->cftable_entry;
- buf = cfg_mem->buf;
-
link->conf.Attributes |= CONF_ENABLE_SPKR;
link->conf.Status = CCSR_AUDIO_ENA;
link->irq.Attributes =
@@ -489,27 +498,9 @@
link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
link->io.NumPorts2 = 8;
- tuple->Attributes = tuple->TupleOffset = 0;
- tuple->TupleData = (cisdata_t *)buf;
- tuple->TupleDataMax = 255;
- tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY;
-
- i = first_tuple(link, tuple, parse);
/* The Megahertz combo cards have modem-like CIS entries, so
we have to explicitly try a bunch of port combinations. */
- while (i == CS_SUCCESS) {
- link->conf.ConfigIndex = cf->index;
- link->io.BasePort2 = cf->io.win[0].base;
- for (k = 0; k < 0x400; k += 0x10) {
- if (k & 0x80) continue;
- link->io.BasePort1 = k ^ 0x300;
- i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS) break;
- }
- if (i == CS_SUCCESS) break;
- i = next_tuple(link, tuple, parse);
- }
- if (i != CS_SUCCESS)
+ if (pcmcia_loop_config(link, mhz_mfc_config_check, NULL))
goto free_cfg_mem;
dev->base_addr = link->io.BasePort1;
@@ -533,7 +524,7 @@
free_cfg_mem:
kfree(cfg_mem);
- return i;
+ return -ENODEV;
}
static int mhz_setup(struct pcmcia_device *link)
@@ -660,46 +651,27 @@
/*====================================================================*/
+static int smc_configcheck(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cf,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ p_dev->io.BasePort1 = cf->io.win[0].base;
+ p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
+ return pcmcia_request_io(p_dev, &p_dev->io);
+}
+
static int smc_config(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
- struct smc_cfg_mem *cfg_mem;
- tuple_t *tuple;
- cisparse_t *parse;
- cistpl_cftable_entry_t *cf;
- u_char *buf;
int i;
- cfg_mem = kmalloc(sizeof(struct smc_cfg_mem), GFP_KERNEL);
- if (!cfg_mem)
- return CS_OUT_OF_RESOURCE;
-
- tuple = &cfg_mem->tuple;
- parse = &cfg_mem->parse;
- cf = &parse->cftable_entry;
- buf = cfg_mem->buf;
-
- tuple->Attributes = tuple->TupleOffset = 0;
- tuple->TupleData = (cisdata_t *)buf;
- tuple->TupleDataMax = 255;
- tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY;
-
link->io.NumPorts1 = 16;
- i = first_tuple(link, tuple, parse);
- while (i != CS_NO_MORE_ITEMS) {
- if (i == CS_SUCCESS) {
- link->conf.ConfigIndex = cf->index;
- link->io.BasePort1 = cf->io.win[0].base;
- link->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
- i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS) break;
- }
- i = next_tuple(link, tuple, parse);
- }
- if (i == CS_SUCCESS)
- dev->base_addr = link->io.BasePort1;
+ i = pcmcia_loop_config(link, smc_configcheck, NULL);
+ if (!i)
+ dev->base_addr = link->io.BasePort1;
- kfree(cfg_mem);
return i;
}
diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c
index f6c4698..d97e6e9 100644
--- a/drivers/net/pcmcia/xirc2ps_cs.c
+++ b/drivers/net/pcmcia/xirc2ps_cs.c
@@ -715,6 +715,47 @@
return 0;
}
+static int
+xirc2ps_config_modem(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cf,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ unsigned int ioaddr;
+
+ if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) {
+ for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) {
+ p_dev->io.BasePort2 = cf->io.win[0].base;
+ p_dev->io.BasePort1 = ioaddr;
+ if (!pcmcia_request_io(p_dev, &p_dev->io))
+ return 0;
+ }
+ }
+ return -ENODEV;
+}
+
+static int
+xirc2ps_config_check(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cf,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ int *pass = priv_data;
+
+ if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) {
+ p_dev->io.BasePort2 = cf->io.win[0].base;
+ p_dev->io.BasePort1 = p_dev->io.BasePort2
+ + (*pass ? (cf->index & 0x20 ? -24:8)
+ : (cf->index & 0x20 ? 8:-24));
+ if (!pcmcia_request_io(p_dev, &p_dev->io))
+ return 0;
+ }
+ return -ENODEV;
+
+}
+
/****************
* xirc2ps_config() is scheduled to run after a CARD_INSERTION event
* is received, to configure the PCMCIA socket, and to make the
@@ -725,13 +766,12 @@
{
struct net_device *dev = link->priv;
local_info_t *local = netdev_priv(dev);
+ unsigned int ioaddr;
tuple_t tuple;
cisparse_t parse;
- unsigned int ioaddr;
int err, i;
u_char buf[64];
cistpl_lan_node_id_t *node_id = (cistpl_lan_node_id_t*)parse.funce.data;
- cistpl_cftable_entry_t *cf = &parse.cftable_entry;
DECLARE_MAC_BUF(mac);
local->dingo_ccr = NULL;
@@ -846,19 +886,8 @@
/* Take the Modem IO port from the CIS and scan for a free
* Ethernet port */
link->io.NumPorts1 = 16; /* no Mako stuff anymore */
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- for (err = first_tuple(link, &tuple, &parse); !err;
- err = next_tuple(link, &tuple, &parse)) {
- if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) {
- for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) {
- link->conf.ConfigIndex = cf->index ;
- link->io.BasePort2 = cf->io.win[0].base;
- link->io.BasePort1 = ioaddr;
- if (!(err=pcmcia_request_io(link, &link->io)))
- goto port_found;
- }
- }
- }
+ if (!pcmcia_loop_config(link, xirc2ps_config_modem, NULL))
+ goto port_found;
} else {
link->io.NumPorts1 = 18;
/* We do 2 passes here: The first one uses the regular mapping and
@@ -866,21 +895,9 @@
* mirrored every 32 bytes. Actually we use a mirrored port for
* the Mako if (on the first pass) the COR bit 5 is set.
*/
- for (pass=0; pass < 2; pass++) {
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- for (err = first_tuple(link, &tuple, &parse); !err;
- err = next_tuple(link, &tuple, &parse)){
- if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8){
- link->conf.ConfigIndex = cf->index ;
- link->io.BasePort2 = cf->io.win[0].base;
- link->io.BasePort1 = link->io.BasePort2
- + (pass ? (cf->index & 0x20 ? -24:8)
- : (cf->index & 0x20 ? 8:-24));
- if (!(err=pcmcia_request_io(link, &link->io)))
+ for (pass=0; pass < 2; pass++)
+ if (!pcmcia_loop_config(link, xirc2ps_config_check, &pass))
goto port_found;
- }
- }
- }
/* if special option:
* try to configure as Ethernet only.
* .... */
diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c
index f123553..fac1526 100644
--- a/drivers/net/wireless/airo_cs.c
+++ b/drivers/net/wireless/airo_cs.c
@@ -206,126 +206,123 @@
#define CS_CHECK(fn, ret) \
do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
+static int airo_cs_config_check(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cfg,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ win_req_t *req = priv_data;
+
+ if (cfg->index == 0)
+ return -ENODEV;
+
+ /* Does this card need audio output? */
+ if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
+ p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
+ p_dev->conf.Status = CCSR_AUDIO_ENA;
+ }
+
+ /* Use power settings for Vcc and Vpp if present */
+ /* Note that the CIS values need to be rescaled */
+ if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
+ p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
+ else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM))
+ p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000;
+
+ /* Do we need to allocate an interrupt? */
+ if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
+ p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+
+ /* IO window settings */
+ p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+ if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+ cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+ if (!(io->flags & CISTPL_IO_8BIT))
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+ if (!(io->flags & CISTPL_IO_16BIT))
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+ p_dev->io.BasePort1 = io->win[0].base;
+ p_dev->io.NumPorts1 = io->win[0].len;
+ if (io->nwin > 1) {
+ p_dev->io.Attributes2 = p_dev->io.Attributes1;
+ p_dev->io.BasePort2 = io->win[1].base;
+ p_dev->io.NumPorts2 = io->win[1].len;
+ }
+ }
+
+ /* This reserves IO space but doesn't actually enable it */
+ if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+ return -ENODEV;
+
+ /*
+ Now set up a common memory window, if needed. There is room
+ in the struct pcmcia_device structure for one memory window handle,
+ but if the base addresses need to be saved, or if multiple
+ windows are needed, the info should go in the private data
+ structure for this device.
+
+ Note that the memory window base is a physical address, and
+ needs to be mapped to virtual space with ioremap() before it
+ is used.
+ */
+ if ((cfg->mem.nwin > 0) || (dflt->mem.nwin > 0)) {
+ cistpl_mem_t *mem = (cfg->mem.nwin) ? &cfg->mem : &dflt->mem;
+ memreq_t map;
+ req->Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM;
+ req->Base = mem->win[0].host_addr;
+ req->Size = mem->win[0].len;
+ req->AccessSpeed = 0;
+ if (pcmcia_request_window(&p_dev, req, &p_dev->win) != 0)
+ return -ENODEV;
+ map.Page = 0;
+ map.CardOffset = mem->win[0].card_addr;
+ if (pcmcia_map_mem_page(p_dev->win, &map) != 0)
+ return -ENODEV;
+ }
+ /* If we got this far, we're cool! */
+ return 0;
+}
+
+
static int airo_config(struct pcmcia_device *link)
{
- tuple_t tuple;
- cisparse_t parse;
local_info_t *dev;
+ win_req_t *req;
int last_fn, last_ret;
- u_char buf[64];
- win_req_t req;
- memreq_t map;
dev = link->priv;
DEBUG(0, "airo_config(0x%p)\n", link);
+ req = kzalloc(sizeof(win_req_t), GFP_KERNEL);
+ if (!req)
+ return -ENOMEM;
+
/*
- In this loop, we scan the CIS for configuration table entries,
- each of which describes a valid card configuration, including
- voltage, IO window, memory window, and interrupt settings.
-
- We make no assumptions about the card to be configured: we use
- just the information available in the CIS. In an ideal world,
- this would work for any PCMCIA card, but it requires a complete
- and accurate CIS. In practice, a driver usually "knows" most of
- these things without consulting the CIS, and most client drivers
- will only use the CIS to fill in implementation-defined details.
+ * In this loop, we scan the CIS for configuration table
+ * entries, each of which describes a valid card
+ * configuration, including voltage, IO window, memory window,
+ * and interrupt settings.
+ *
+ * We make no assumptions about the card to be configured: we
+ * use just the information available in the CIS. In an ideal
+ * world, this would work for any PCMCIA card, but it requires
+ * a complete and accurate CIS. In practice, a driver usually
+ * "knows" most of these things without consulting the CIS,
+ * and most client drivers will only use the CIS to fill in
+ * implementation-defined details.
+ */
+ last_ret = pcmcia_loop_config(link, airo_cs_config_check, req);
+ if (last_ret)
+ goto failed;
+
+ /*
+ Allocate an interrupt line. Note that this does not assign a
+ handler to the interrupt, unless the 'Handler' member of the
+ irq structure is initialized.
*/
- tuple.Attributes = 0;
- tuple.TupleData = buf;
- tuple.TupleDataMax = sizeof(buf);
- tuple.TupleOffset = 0;
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
- while (1) {
- cistpl_cftable_entry_t dflt = { 0 };
- cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
- if (pcmcia_get_tuple_data(link, &tuple) != 0 ||
- pcmcia_parse_tuple(link, &tuple, &parse) != 0)
- goto next_entry;
-
- if (cfg->flags & CISTPL_CFTABLE_DEFAULT) dflt = *cfg;
- if (cfg->index == 0) goto next_entry;
- link->conf.ConfigIndex = cfg->index;
-
- /* Does this card need audio output? */
- if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
- link->conf.Attributes |= CONF_ENABLE_SPKR;
- link->conf.Status = CCSR_AUDIO_ENA;
- }
-
- /* Use power settings for Vcc and Vpp if present */
- /* Note that the CIS values need to be rescaled */
- if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
- link->conf.Vpp =
- cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
- else if (dflt.vpp1.present & (1<<CISTPL_POWER_VNOM))
- link->conf.Vpp =
- dflt.vpp1.param[CISTPL_POWER_VNOM]/10000;
-
- /* Do we need to allocate an interrupt? */
- if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1)
- link->conf.Attributes |= CONF_ENABLE_IRQ;
-
- /* IO window settings */
- link->io.NumPorts1 = link->io.NumPorts2 = 0;
- if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
- cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (!(io->flags & CISTPL_IO_8BIT))
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(io->flags & CISTPL_IO_16BIT))
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- link->io.BasePort1 = io->win[0].base;
- link->io.NumPorts1 = io->win[0].len;
- if (io->nwin > 1) {
- link->io.Attributes2 = link->io.Attributes1;
- link->io.BasePort2 = io->win[1].base;
- link->io.NumPorts2 = io->win[1].len;
- }
- }
-
- /* This reserves IO space but doesn't actually enable it */
- if (pcmcia_request_io(link, &link->io) != 0)
- goto next_entry;
-
- /*
- Now set up a common memory window, if needed. There is room
- in the struct pcmcia_device structure for one memory window handle,
- but if the base addresses need to be saved, or if multiple
- windows are needed, the info should go in the private data
- structure for this device.
-
- Note that the memory window base is a physical address, and
- needs to be mapped to virtual space with ioremap() before it
- is used.
- */
- if ((cfg->mem.nwin > 0) || (dflt.mem.nwin > 0)) {
- cistpl_mem_t *mem =
- (cfg->mem.nwin) ? &cfg->mem : &dflt.mem;
- req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM;
- req.Base = mem->win[0].host_addr;
- req.Size = mem->win[0].len;
- req.AccessSpeed = 0;
- if (pcmcia_request_window(&link, &req, &link->win) != 0)
- goto next_entry;
- map.Page = 0; map.CardOffset = mem->win[0].card_addr;
- if (pcmcia_map_mem_page(link->win, &map) != 0)
- goto next_entry;
- }
- /* If we got this far, we're cool! */
- break;
-
- next_entry:
- CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple));
- }
-
- /*
- Allocate an interrupt line. Note that this does not assign a
- handler to the interrupt, unless the 'Handler' member of the
- irq structure is initialized.
- */
if (link->conf.Attributes & CONF_ENABLE_IRQ)
CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
@@ -362,14 +359,17 @@
printk(" & 0x%04x-0x%04x", link->io.BasePort2,
link->io.BasePort2+link->io.NumPorts2-1);
if (link->win)
- printk(", mem 0x%06lx-0x%06lx", req.Base,
- req.Base+req.Size-1);
+ printk(", mem 0x%06lx-0x%06lx", req->Base,
+ req->Base+req->Size-1);
printk("\n");
+ kfree(req);
return 0;
cs_failed:
cs_error(link, last_fn, last_ret);
+ failed:
airo_release(link);
+ kfree(req);
return -ENODEV;
} /* airo_config */
diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c
index 12617cd..4830d51 100644
--- a/drivers/net/wireless/atmel_cs.c
+++ b/drivers/net/wireless/atmel_cs.c
@@ -224,13 +224,58 @@
return 0;
}
+static int atmel_config_check(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cfg,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ if (cfg->index == 0)
+ return -ENODEV;
+
+ /* Does this card need audio output? */
+ if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
+ p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
+ p_dev->conf.Status = CCSR_AUDIO_ENA;
+ }
+
+ /* Use power settings for Vcc and Vpp if present */
+ /* Note that the CIS values need to be rescaled */
+ if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
+ p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
+ else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM))
+ p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000;
+
+ /* Do we need to allocate an interrupt? */
+ if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
+ p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+
+ /* IO window settings */
+ p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+ if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+ cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+ if (!(io->flags & CISTPL_IO_8BIT))
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+ if (!(io->flags & CISTPL_IO_16BIT))
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+ p_dev->io.BasePort1 = io->win[0].base;
+ p_dev->io.NumPorts1 = io->win[0].len;
+ if (io->nwin > 1) {
+ p_dev->io.Attributes2 = p_dev->io.Attributes1;
+ p_dev->io.BasePort2 = io->win[1].base;
+ p_dev->io.NumPorts2 = io->win[1].len;
+ }
+ }
+
+ /* This reserves IO space but doesn't actually enable it */
+ return pcmcia_request_io(p_dev, &p_dev->io);
+}
+
static int atmel_config(struct pcmcia_device *link)
{
- tuple_t tuple;
- cisparse_t parse;
local_info_t *dev;
int last_fn, last_ret;
- u_char buf[64];
struct pcmcia_device_id *did;
dev = link->priv;
@@ -238,11 +283,6 @@
DEBUG(0, "atmel_config(0x%p)\n", link);
- tuple.Attributes = 0;
- tuple.TupleData = buf;
- tuple.TupleDataMax = sizeof(buf);
- tuple.TupleOffset = 0;
-
/*
In this loop, we scan the CIS for configuration table entries,
each of which describes a valid card configuration, including
@@ -255,66 +295,8 @@
these things without consulting the CIS, and most client drivers
will only use the CIS to fill in implementation-defined details.
*/
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
- while (1) {
- cistpl_cftable_entry_t dflt = { 0 };
- cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
- if (pcmcia_get_tuple_data(link, &tuple) != 0 ||
- pcmcia_parse_tuple(link, &tuple, &parse) != 0)
- goto next_entry;
-
- if (cfg->flags & CISTPL_CFTABLE_DEFAULT) dflt = *cfg;
- if (cfg->index == 0) goto next_entry;
- link->conf.ConfigIndex = cfg->index;
-
- /* Does this card need audio output? */
- if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
- link->conf.Attributes |= CONF_ENABLE_SPKR;
- link->conf.Status = CCSR_AUDIO_ENA;
- }
-
- /* Use power settings for Vcc and Vpp if present */
- /* Note that the CIS values need to be rescaled */
- if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
- link->conf.Vpp =
- cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
- else if (dflt.vpp1.present & (1<<CISTPL_POWER_VNOM))
- link->conf.Vpp =
- dflt.vpp1.param[CISTPL_POWER_VNOM]/10000;
-
- /* Do we need to allocate an interrupt? */
- if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1)
- link->conf.Attributes |= CONF_ENABLE_IRQ;
-
- /* IO window settings */
- link->io.NumPorts1 = link->io.NumPorts2 = 0;
- if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
- cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (!(io->flags & CISTPL_IO_8BIT))
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(io->flags & CISTPL_IO_16BIT))
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- link->io.BasePort1 = io->win[0].base;
- link->io.NumPorts1 = io->win[0].len;
- if (io->nwin > 1) {
- link->io.Attributes2 = link->io.Attributes1;
- link->io.BasePort2 = io->win[1].base;
- link->io.NumPorts2 = io->win[1].len;
- }
- }
-
- /* This reserves IO space but doesn't actually enable it */
- if (pcmcia_request_io(link, &link->io) != 0)
- goto next_entry;
-
- /* If we got this far, we're cool! */
- break;
-
- next_entry:
- CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple));
- }
+ if (pcmcia_loop_config(link, atmel_config_check, NULL))
+ goto failed;
/*
Allocate an interrupt line. Note that this does not assign a
@@ -360,6 +342,7 @@
cs_failed:
cs_error(link, last_fn, last_ret);
+ failed:
atmel_release(link);
return -ENODEV;
}
diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c
index 3b4e55c..c768d42 100644
--- a/drivers/net/wireless/hostap/hostap_cs.c
+++ b/drivers/net/wireless/hostap/hostap_cs.c
@@ -532,145 +532,118 @@
#define CS_CHECK(fn, ret) \
do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-#define CFG_CHECK2(fn, retf) \
-do { int _ret = (retf); \
-if (_ret != 0) { \
- PDEBUG(DEBUG_EXTRA, "CardServices(" #fn ") returned %d\n", _ret); \
- cs_error(link, fn, _ret); \
- goto next_entry; \
-} \
-} while (0)
-
/* run after a CARD_INSERTION event is received to configure the PCMCIA
* socket and make the device available to the system */
+
+static int prism2_config_check(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cfg,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ if (cfg->index == 0)
+ return -ENODEV;
+
+ PDEBUG(DEBUG_EXTRA, "Checking CFTABLE_ENTRY 0x%02X "
+ "(default 0x%02X)\n", cfg->index, dflt->index);
+
+ /* Does this card need audio output? */
+ if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
+ p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
+ p_dev->conf.Status = CCSR_AUDIO_ENA;
+ }
+
+ /* Use power settings for Vcc and Vpp if present */
+ /* Note that the CIS values need to be rescaled */
+ if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+ if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] /
+ 10000 && !ignore_cis_vcc) {
+ PDEBUG(DEBUG_EXTRA, " Vcc mismatch - skipping"
+ " this entry\n");
+ return -ENODEV;
+ }
+ } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+ if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] /
+ 10000 && !ignore_cis_vcc) {
+ PDEBUG(DEBUG_EXTRA, " Vcc (default) mismatch "
+ "- skipping this entry\n");
+ return -ENODEV;
+ }
+ }
+
+ if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
+ p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+ else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM))
+ p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+
+ /* Do we need to allocate an interrupt? */
+ if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
+ p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+ else if (!(p_dev->conf.Attributes & CONF_ENABLE_IRQ)) {
+ /* At least Compaq WL200 does not have IRQInfo1 set,
+ * but it does not work without interrupts.. */
+ printk(KERN_WARNING "Config has no IRQ info, but trying to "
+ "enable IRQ anyway..\n");
+ p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+ }
+
+ /* IO window settings */
+ PDEBUG(DEBUG_EXTRA, "IO window settings: cfg->io.nwin=%d "
+ "dflt->io.nwin=%d\n",
+ cfg->io.nwin, dflt->io.nwin);
+ p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+ if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+ cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+ PDEBUG(DEBUG_EXTRA, "io->flags = 0x%04X, "
+ "io.base=0x%04x, len=%d\n", io->flags,
+ io->win[0].base, io->win[0].len);
+ if (!(io->flags & CISTPL_IO_8BIT))
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+ if (!(io->flags & CISTPL_IO_16BIT))
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+ p_dev->io.IOAddrLines = io->flags &
+ CISTPL_IO_LINES_MASK;
+ p_dev->io.BasePort1 = io->win[0].base;
+ p_dev->io.NumPorts1 = io->win[0].len;
+ if (io->nwin > 1) {
+ p_dev->io.Attributes2 = p_dev->io.Attributes1;
+ p_dev->io.BasePort2 = io->win[1].base;
+ p_dev->io.NumPorts2 = io->win[1].len;
+ }
+ }
+
+ /* This reserves IO space but doesn't actually enable it */
+ return pcmcia_request_io(p_dev, &p_dev->io);
+}
+
static int prism2_config(struct pcmcia_device *link)
{
struct net_device *dev;
struct hostap_interface *iface;
local_info_t *local;
int ret = 1;
- tuple_t tuple;
- cisparse_t *parse;
int last_fn, last_ret;
- u_char buf[64];
- config_info_t conf;
- cistpl_cftable_entry_t dflt = { 0 };
struct hostap_cs_priv *hw_priv;
PDEBUG(DEBUG_FLOW, "prism2_config()\n");
- parse = kmalloc(sizeof(cisparse_t), GFP_KERNEL);
hw_priv = kzalloc(sizeof(*hw_priv), GFP_KERNEL);
- if (parse == NULL || hw_priv == NULL) {
+ if (hw_priv == NULL) {
ret = -ENOMEM;
goto failed;
}
- tuple.Attributes = 0;
- tuple.TupleData = buf;
- tuple.TupleDataMax = sizeof(buf);
- tuple.TupleOffset = 0;
-
- CS_CHECK(GetConfigurationInfo,
- pcmcia_get_configuration_info(link, &conf));
-
/* Look for an appropriate configuration table entry in the CIS */
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
- for (;;) {
- cistpl_cftable_entry_t *cfg = &(parse->cftable_entry);
- CFG_CHECK2(GetTupleData,
- pcmcia_get_tuple_data(link, &tuple));
- CFG_CHECK2(ParseTuple,
- pcmcia_parse_tuple(link, &tuple, parse));
-
- if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
- dflt = *cfg;
- if (cfg->index == 0)
- goto next_entry;
- link->conf.ConfigIndex = cfg->index;
- PDEBUG(DEBUG_EXTRA, "Checking CFTABLE_ENTRY 0x%02X "
- "(default 0x%02X)\n", cfg->index, dflt.index);
-
- /* Does this card need audio output? */
- if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
- link->conf.Attributes |= CONF_ENABLE_SPKR;
- link->conf.Status = CCSR_AUDIO_ENA;
- }
-
- /* Use power settings for Vcc and Vpp if present */
- /* Note that the CIS values need to be rescaled */
- if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
- if (conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] /
- 10000 && !ignore_cis_vcc) {
- PDEBUG(DEBUG_EXTRA, " Vcc mismatch - skipping"
- " this entry\n");
- goto next_entry;
- }
- } else if (dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) {
- if (conf.Vcc != dflt.vcc.param[CISTPL_POWER_VNOM] /
- 10000 && !ignore_cis_vcc) {
- PDEBUG(DEBUG_EXTRA, " Vcc (default) mismatch "
- "- skipping this entry\n");
- goto next_entry;
- }
- }
-
- if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
- link->conf.Vpp =
- cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
- else if (dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
- link->conf.Vpp =
- dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
-
- /* Do we need to allocate an interrupt? */
- if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1)
- link->conf.Attributes |= CONF_ENABLE_IRQ;
- else if (!(link->conf.Attributes & CONF_ENABLE_IRQ)) {
- /* At least Compaq WL200 does not have IRQInfo1 set,
- * but it does not work without interrupts.. */
- printk("Config has no IRQ info, but trying to enable "
- "IRQ anyway..\n");
- link->conf.Attributes |= CONF_ENABLE_IRQ;
- }
-
- /* IO window settings */
- PDEBUG(DEBUG_EXTRA, "IO window settings: cfg->io.nwin=%d "
- "dflt.io.nwin=%d\n",
- cfg->io.nwin, dflt.io.nwin);
- link->io.NumPorts1 = link->io.NumPorts2 = 0;
- if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
- cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- PDEBUG(DEBUG_EXTRA, "io->flags = 0x%04X, "
- "io.base=0x%04x, len=%d\n", io->flags,
- io->win[0].base, io->win[0].len);
- if (!(io->flags & CISTPL_IO_8BIT))
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(io->flags & CISTPL_IO_16BIT))
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- link->io.IOAddrLines = io->flags &
- CISTPL_IO_LINES_MASK;
- link->io.BasePort1 = io->win[0].base;
- link->io.NumPorts1 = io->win[0].len;
- if (io->nwin > 1) {
- link->io.Attributes2 = link->io.Attributes1;
- link->io.BasePort2 = io->win[1].base;
- link->io.NumPorts2 = io->win[1].len;
- }
- }
-
- /* This reserves IO space but doesn't actually enable it */
- CFG_CHECK2(RequestIO,
- pcmcia_request_io(link, &link->io));
-
- /* This configuration table entry is OK */
- break;
-
- next_entry:
- CS_CHECK(GetNextTuple,
- pcmcia_get_next_tuple(link, &tuple));
+ last_ret = pcmcia_loop_config(link, prism2_config_check, NULL);
+ if (last_ret) {
+ if (!ignore_cis_vcc)
+ printk(KERN_ERR "GetNextTuple(): No matching "
+ "CIS configuration. Maybe you need the "
+ "ignore_cis_vcc=1 parameter.\n");
+ cs_error(link, RequestIO, last_ret);
+ goto failed;
}
/* Need to allocate net_device before requesting IRQ handler */
@@ -738,14 +711,12 @@
if (ret == 0 && local->ddev)
strcpy(hw_priv->node.dev_name, local->ddev->name);
}
- kfree(parse);
return ret;
cs_failed:
cs_error(link, last_fn, last_ret);
failed:
- kfree(parse);
kfree(hw_priv);
prism2_release((u_long)link);
return ret;
diff --git a/drivers/net/wireless/orinoco_cs.c b/drivers/net/wireless/orinoco_cs.c
index 1c216e0..c7b57d9 100644
--- a/drivers/net/wireless/orinoco_cs.c
+++ b/drivers/net/wireless/orinoco_cs.c
@@ -164,6 +164,70 @@
last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; \
} while (0)
+static int orinoco_cs_config_check(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cfg,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ if (cfg->index == 0)
+ goto next_entry;
+
+ /* Use power settings for Vcc and Vpp if present */
+ /* Note that the CIS values need to be rescaled */
+ if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+ if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) {
+ DEBUG(2, "spectrum_cs_config: Vcc mismatch (vcc = %d, CIS = %d)\n", vcc, cfg->vcc.param[CISTPL_POWER_VNOM] / 10000);
+ if (!ignore_cis_vcc)
+ goto next_entry;
+ }
+ } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+ if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) {
+ DEBUG(2, "spectrum_cs_config: Vcc mismatch (vcc = %d, CIS = %d)\n", vcc, dflt->vcc.param[CISTPL_POWER_VNOM] / 10000);
+ if (!ignore_cis_vcc)
+ goto next_entry;
+ }
+ }
+
+ if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
+ p_dev->conf.Vpp =
+ cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+ else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM))
+ p_dev->conf.Vpp =
+ dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+
+ /* Do we need to allocate an interrupt? */
+ p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+
+ /* IO window settings */
+ p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+ if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+ cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+ if (!(io->flags & CISTPL_IO_8BIT))
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+ if (!(io->flags & CISTPL_IO_16BIT))
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+ p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
+ p_dev->io.BasePort1 = io->win[0].base;
+ p_dev->io.NumPorts1 = io->win[0].len;
+ if (io->nwin > 1) {
+ p_dev->io.Attributes2 = p_dev->io.Attributes1;
+ p_dev->io.BasePort2 = io->win[1].base;
+ p_dev->io.NumPorts2 = io->win[1].len;
+ }
+
+ /* This reserves IO space but doesn't actually enable it */
+ if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+ goto next_entry;
+ }
+ return 0;
+
+next_entry:
+ pcmcia_disable_device(p_dev);
+ return -ENODEV;
+};
+
static int
orinoco_cs_config(struct pcmcia_device *link)
{
@@ -172,16 +236,8 @@
struct orinoco_pccard *card = priv->card;
hermes_t *hw = &priv->hw;
int last_fn, last_ret;
- u_char buf[64];
- config_info_t conf;
- tuple_t tuple;
- cisparse_t parse;
void __iomem *mem;
- /* Look up the current Vcc */
- CS_CHECK(GetConfigurationInfo,
- pcmcia_get_configuration_info(link, &conf));
-
/*
* In this loop, we scan the CIS for configuration table
* entries, each of which describes a valid card
@@ -196,94 +252,14 @@
* and most client drivers will only use the CIS to fill in
* implementation-defined details.
*/
- tuple.Attributes = 0;
- tuple.TupleData = buf;
- tuple.TupleDataMax = sizeof(buf);
- tuple.TupleOffset = 0;
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
- while (1) {
- cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
- cistpl_cftable_entry_t dflt = { .index = 0 };
-
- if ( (pcmcia_get_tuple_data(link, &tuple) != 0)
- || (pcmcia_parse_tuple(link, &tuple, &parse) != 0))
- goto next_entry;
-
- if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
- dflt = *cfg;
- if (cfg->index == 0)
- goto next_entry;
- link->conf.ConfigIndex = cfg->index;
-
- /* Use power settings for Vcc and Vpp if present */
- /* Note that the CIS values need to be rescaled */
- if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
- if (conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) {
- DEBUG(2, "orinoco_cs_config: Vcc mismatch (conf.Vcc = %d, cfg CIS = %d)\n", conf.Vcc, cfg->vcc.param[CISTPL_POWER_VNOM] / 10000);
- if (!ignore_cis_vcc)
- goto next_entry;
- }
- } else if (dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) {
- if (conf.Vcc != dflt.vcc.param[CISTPL_POWER_VNOM] / 10000) {
- DEBUG(2, "orinoco_cs_config: Vcc mismatch (conf.Vcc = %d, dflt CIS = %d)\n", conf.Vcc, dflt.vcc.param[CISTPL_POWER_VNOM] / 10000);
- if(!ignore_cis_vcc)
- goto next_entry;
- }
- }
-
- if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
- link->conf.Vpp =
- cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
- else if (dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
- link->conf.Vpp =
- dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
-
- /* Do we need to allocate an interrupt? */
- link->conf.Attributes |= CONF_ENABLE_IRQ;
-
- /* IO window settings */
- link->io.NumPorts1 = link->io.NumPorts2 = 0;
- if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
- cistpl_io_t *io =
- (cfg->io.nwin) ? &cfg->io : &dflt.io;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (!(io->flags & CISTPL_IO_8BIT))
- link->io.Attributes1 =
- IO_DATA_PATH_WIDTH_16;
- if (!(io->flags & CISTPL_IO_16BIT))
- link->io.Attributes1 =
- IO_DATA_PATH_WIDTH_8;
- link->io.IOAddrLines =
- io->flags & CISTPL_IO_LINES_MASK;
- link->io.BasePort1 = io->win[0].base;
- link->io.NumPorts1 = io->win[0].len;
- if (io->nwin > 1) {
- link->io.Attributes2 =
- link->io.Attributes1;
- link->io.BasePort2 = io->win[1].base;
- link->io.NumPorts2 = io->win[1].len;
- }
-
- /* This reserves IO space but doesn't actually enable it */
- if (pcmcia_request_io(link, &link->io) != 0)
- goto next_entry;
- }
-
-
- /* If we got this far, we're cool! */
-
- break;
-
- next_entry:
- pcmcia_disable_device(link);
- last_ret = pcmcia_get_next_tuple(link, &tuple);
- if (last_ret == CS_NO_MORE_ITEMS) {
+ last_ret = pcmcia_loop_config(link, orinoco_cs_config_check, NULL);
+ if (last_ret) {
+ if (!ignore_cis_vcc)
printk(KERN_ERR PFX "GetNextTuple(): No matching "
"CIS configuration. Maybe you need the "
"ignore_cis_vcc=1 parameter.\n");
- goto cs_failed;
- }
+ cs_error(link, RequestIO, last_ret);
+ goto failed;
}
/*
@@ -334,7 +310,6 @@
"0x%04x-0x%04x\n", dev->name, dev->dev.parent->bus_id,
link->irq.AssignedIRQ, link->io.BasePort1,
link->io.BasePort1 + link->io.NumPorts1 - 1);
-
return 0;
cs_failed:
diff --git a/drivers/net/wireless/spectrum_cs.c b/drivers/net/wireless/spectrum_cs.c
index 98df9bc..d7e9d9c 100644
--- a/drivers/net/wireless/spectrum_cs.c
+++ b/drivers/net/wireless/spectrum_cs.c
@@ -633,6 +633,70 @@
* device available to the system.
*/
+static int spectrum_cs_config_check(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cfg,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ if (cfg->index == 0)
+ goto next_entry;
+
+ /* Use power settings for Vcc and Vpp if present */
+ /* Note that the CIS values need to be rescaled */
+ if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+ if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) {
+ DEBUG(2, "spectrum_cs_config: Vcc mismatch (vcc = %d, CIS = %d)\n", vcc, cfg->vcc.param[CISTPL_POWER_VNOM] / 10000);
+ if (!ignore_cis_vcc)
+ goto next_entry;
+ }
+ } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+ if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) {
+ DEBUG(2, "spectrum_cs_config: Vcc mismatch (vcc = %d, CIS = %d)\n", vcc, dflt->vcc.param[CISTPL_POWER_VNOM] / 10000);
+ if (!ignore_cis_vcc)
+ goto next_entry;
+ }
+ }
+
+ if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
+ p_dev->conf.Vpp =
+ cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+ else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM))
+ p_dev->conf.Vpp =
+ dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+
+ /* Do we need to allocate an interrupt? */
+ p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+
+ /* IO window settings */
+ p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+ if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+ cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+ if (!(io->flags & CISTPL_IO_8BIT))
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+ if (!(io->flags & CISTPL_IO_16BIT))
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+ p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
+ p_dev->io.BasePort1 = io->win[0].base;
+ p_dev->io.NumPorts1 = io->win[0].len;
+ if (io->nwin > 1) {
+ p_dev->io.Attributes2 = p_dev->io.Attributes1;
+ p_dev->io.BasePort2 = io->win[1].base;
+ p_dev->io.NumPorts2 = io->win[1].len;
+ }
+
+ /* This reserves IO space but doesn't actually enable it */
+ if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+ goto next_entry;
+ }
+ return 0;
+
+next_entry:
+ pcmcia_disable_device(p_dev);
+ return -ENODEV;
+};
+
static int
spectrum_cs_config(struct pcmcia_device *link)
{
@@ -641,16 +705,8 @@
struct orinoco_pccard *card = priv->card;
hermes_t *hw = &priv->hw;
int last_fn, last_ret;
- u_char buf[64];
- config_info_t conf;
- tuple_t tuple;
- cisparse_t parse;
void __iomem *mem;
- /* Look up the current Vcc */
- CS_CHECK(GetConfigurationInfo,
- pcmcia_get_configuration_info(link, &conf));
-
/*
* In this loop, we scan the CIS for configuration table
* entries, each of which describes a valid card
@@ -665,94 +721,14 @@
* and most client drivers will only use the CIS to fill in
* implementation-defined details.
*/
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- tuple.Attributes = 0;
- tuple.TupleData = buf;
- tuple.TupleDataMax = sizeof(buf);
- tuple.TupleOffset = 0;
- CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
- while (1) {
- cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
- cistpl_cftable_entry_t dflt = { .index = 0 };
-
- if ( (pcmcia_get_tuple_data(link, &tuple) != 0)
- || (pcmcia_parse_tuple(link, &tuple, &parse) != 0))
- goto next_entry;
-
- if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
- dflt = *cfg;
- if (cfg->index == 0)
- goto next_entry;
- link->conf.ConfigIndex = cfg->index;
-
- /* Use power settings for Vcc and Vpp if present */
- /* Note that the CIS values need to be rescaled */
- if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
- if (conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) {
- DEBUG(2, "spectrum_cs_config: Vcc mismatch (conf.Vcc = %d, CIS = %d)\n", conf.Vcc, cfg->vcc.param[CISTPL_POWER_VNOM] / 10000);
- if (!ignore_cis_vcc)
- goto next_entry;
- }
- } else if (dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) {
- if (conf.Vcc != dflt.vcc.param[CISTPL_POWER_VNOM] / 10000) {
- DEBUG(2, "spectrum_cs_config: Vcc mismatch (conf.Vcc = %d, CIS = %d)\n", conf.Vcc, dflt.vcc.param[CISTPL_POWER_VNOM] / 10000);
- if(!ignore_cis_vcc)
- goto next_entry;
- }
- }
-
- if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
- link->conf.Vpp =
- cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
- else if (dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
- link->conf.Vpp =
- dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
-
- /* Do we need to allocate an interrupt? */
- link->conf.Attributes |= CONF_ENABLE_IRQ;
-
- /* IO window settings */
- link->io.NumPorts1 = link->io.NumPorts2 = 0;
- if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
- cistpl_io_t *io =
- (cfg->io.nwin) ? &cfg->io : &dflt.io;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (!(io->flags & CISTPL_IO_8BIT))
- link->io.Attributes1 =
- IO_DATA_PATH_WIDTH_16;
- if (!(io->flags & CISTPL_IO_16BIT))
- link->io.Attributes1 =
- IO_DATA_PATH_WIDTH_8;
- link->io.IOAddrLines =
- io->flags & CISTPL_IO_LINES_MASK;
- link->io.BasePort1 = io->win[0].base;
- link->io.NumPorts1 = io->win[0].len;
- if (io->nwin > 1) {
- link->io.Attributes2 =
- link->io.Attributes1;
- link->io.BasePort2 = io->win[1].base;
- link->io.NumPorts2 = io->win[1].len;
- }
-
- /* This reserves IO space but doesn't actually enable it */
- if (pcmcia_request_io(link, &link->io) != 0)
- goto next_entry;
- }
-
-
- /* If we got this far, we're cool! */
-
- break;
-
- next_entry:
- pcmcia_disable_device(link);
- last_ret = pcmcia_get_next_tuple(link, &tuple);
- if (last_ret == CS_NO_MORE_ITEMS) {
+ last_ret = pcmcia_loop_config(link, spectrum_cs_config_check, NULL);
+ if (last_ret) {
+ if (!ignore_cis_vcc)
printk(KERN_ERR PFX "GetNextTuple(): No matching "
"CIS configuration. Maybe you need the "
"ignore_cis_vcc=1 parameter.\n");
- goto cs_failed;
- }
+ cs_error(link, RequestIO, last_ret);
+ goto failed;
}
/*
diff --git a/drivers/parport/parport_cs.c b/drivers/parport/parport_cs.c
index 00e1d96..b1899e9 100644
--- a/drivers/parport/parport_cs.c
+++ b/drivers/parport/parport_cs.c
@@ -149,52 +149,44 @@
#define CS_CHECK(fn, ret) \
do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
+static int parport_config_check(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cfg,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+ cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
+ if (epp_mode)
+ p_dev->conf.ConfigIndex |= FORCE_EPP_MODE;
+ p_dev->io.BasePort1 = io->win[0].base;
+ p_dev->io.NumPorts1 = io->win[0].len;
+ p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
+ if (io->nwin == 2) {
+ p_dev->io.BasePort2 = io->win[1].base;
+ p_dev->io.NumPorts2 = io->win[1].len;
+ }
+ if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+ return -ENODEV;
+ return 0;
+ }
+ return -ENODEV;
+}
+
static int parport_config(struct pcmcia_device *link)
{
parport_info_t *info = link->priv;
- tuple_t tuple;
- u_short buf[128];
- cisparse_t parse;
- cistpl_cftable_entry_t *cfg = &parse.cftable_entry;
- cistpl_cftable_entry_t dflt = { 0 };
struct parport *p;
int last_ret, last_fn;
-
- DEBUG(0, "parport_config(0x%p)\n", link);
-
- tuple.TupleData = (cisdata_t *)buf;
- tuple.TupleOffset = 0; tuple.TupleDataMax = 255;
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- tuple.Attributes = 0;
- CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
- while (1) {
- if (pcmcia_get_tuple_data(link, &tuple) != 0 ||
- pcmcia_parse_tuple(link, &tuple, &parse) != 0)
- goto next_entry;
- if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
- cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
- link->conf.ConfigIndex = cfg->index;
- if (epp_mode)
- link->conf.ConfigIndex |= FORCE_EPP_MODE;
- link->io.BasePort1 = io->win[0].base;
- link->io.NumPorts1 = io->win[0].len;
- link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
- if (io->nwin == 2) {
- link->io.BasePort2 = io->win[1].base;
- link->io.NumPorts2 = io->win[1].len;
- }
- if (pcmcia_request_io(link, &link->io) != 0)
- goto next_entry;
- /* If we've got this far, we're done */
- break;
- }
-
- next_entry:
- if (cfg->flags & CISTPL_CFTABLE_DEFAULT) dflt = *cfg;
- CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple));
+ DEBUG(0, "parport_config(0x%p)\n", link);
+
+ last_ret = pcmcia_loop_config(link, parport_config_check, NULL);
+ if (last_ret) {
+ cs_error(link, RequestIO, last_ret);
+ goto failed;
}
-
+
CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
diff --git a/drivers/pcmcia/cistpl.c b/drivers/pcmcia/cistpl.c
index f804b45..fe789e0 100644
--- a/drivers/pcmcia/cistpl.c
+++ b/drivers/pcmcia/cistpl.c
@@ -266,13 +266,13 @@
======================================================================*/
static void read_cis_cache(struct pcmcia_socket *s, int attr, u_int addr,
- u_int len, void *ptr)
+ size_t len, void *ptr)
{
struct cis_cache_entry *cis;
int ret;
if (s->fake_cis) {
- if (s->fake_cis_len > addr+len)
+ if (s->fake_cis_len >= addr+len)
memcpy(ptr, s->fake_cis+addr, len);
else
memset(ptr, 0xff, len);
@@ -381,17 +381,17 @@
======================================================================*/
-int pcmcia_replace_cis(struct pcmcia_socket *s, cisdump_t *cis)
+int pcmcia_replace_cis(struct pcmcia_socket *s,
+ const u8 *data, const size_t len)
{
- kfree(s->fake_cis);
- s->fake_cis = NULL;
- if (cis->Length > CISTPL_MAX_CIS_SIZE)
+ if (len > CISTPL_MAX_CIS_SIZE)
return CS_BAD_SIZE;
- s->fake_cis = kmalloc(cis->Length, GFP_KERNEL);
+ kfree(s->fake_cis);
+ s->fake_cis = kmalloc(len, GFP_KERNEL);
if (s->fake_cis == NULL)
return CS_OUT_OF_RESOURCE;
- s->fake_cis_len = cis->Length;
- memcpy(s->fake_cis, cis->Data, cis->Length);
+ s->fake_cis_len = len;
+ memcpy(s->fake_cis, data, len);
return CS_SUCCESS;
}
EXPORT_SYMBOL(pcmcia_replace_cis);
diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c
index 6501a96..a393501 100644
--- a/drivers/pcmcia/ds.c
+++ b/drivers/pcmcia/ds.c
@@ -864,7 +864,6 @@
int ret = -ENOMEM;
int no_funcs;
int old_funcs;
- cisdump_t *cis;
cistpl_longlink_mfc_t mfc;
if (!filename)
@@ -889,16 +888,7 @@
goto release;
}
- cis = kzalloc(sizeof(cisdump_t), GFP_KERNEL);
- if (!cis) {
- ret = -ENOMEM;
- goto release;
- }
-
- cis->Length = fw->size + 1;
- memcpy(cis->Data, fw->data, fw->size);
-
- if (!pcmcia_replace_cis(s, cis))
+ if (!pcmcia_replace_cis(s, fw->data, fw->size))
ret = 0;
else {
dev_printk(KERN_ERR, &dev->dev,
diff --git a/drivers/pcmcia/pcmcia_ioctl.c b/drivers/pcmcia/pcmcia_ioctl.c
index 0492d2d..f555a50 100644
--- a/drivers/pcmcia/pcmcia_ioctl.c
+++ b/drivers/pcmcia/pcmcia_ioctl.c
@@ -867,7 +867,7 @@
&buf->win_info.map);
break;
case DS_REPLACE_CIS:
- ret = pcmcia_replace_cis(s, &buf->cisdump);
+ ret = pcmcia_replace_cis(s, buf->cisdump.Data, buf->cisdump.Length);
break;
case DS_BIND_REQUEST:
if (!capable(CAP_SYS_ADMIN)) {
diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c
index 2c63605..9afe420 100644
--- a/drivers/pcmcia/pcmcia_resource.c
+++ b/drivers/pcmcia/pcmcia_resource.c
@@ -912,3 +912,79 @@
pcmcia_release_window(p_dev->win);
}
EXPORT_SYMBOL(pcmcia_disable_device);
+
+
+struct pcmcia_cfg_mem {
+ tuple_t tuple;
+ cisparse_t parse;
+ u8 buf[256];
+ cistpl_cftable_entry_t dflt;
+};
+
+/**
+ * pcmcia_loop_config() - loop over configuration options
+ * @p_dev: the struct pcmcia_device which we need to loop for.
+ * @conf_check: function to call for each configuration option.
+ * It gets passed the struct pcmcia_device, the CIS data
+ * describing the configuration option, and private data
+ * being passed to pcmcia_loop_config()
+ * @priv_data: private data to be passed to the conf_check function.
+ *
+ * pcmcia_loop_config() loops over all configuration options, and calls
+ * the driver-specific conf_check() for each one, checking whether
+ * it is a valid one.
+ */
+int pcmcia_loop_config(struct pcmcia_device *p_dev,
+ int (*conf_check) (struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cfg,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data),
+ void *priv_data)
+{
+ struct pcmcia_cfg_mem *cfg_mem;
+
+ tuple_t *tuple;
+ int ret = -ENODEV;
+ unsigned int vcc;
+
+ cfg_mem = kzalloc(sizeof(struct pcmcia_cfg_mem), GFP_KERNEL);
+ if (cfg_mem == NULL)
+ return -ENOMEM;
+
+ /* get the current Vcc setting */
+ vcc = p_dev->socket->socket.Vcc;
+
+ tuple = &cfg_mem->tuple;
+ tuple->TupleData = cfg_mem->buf;
+ tuple->TupleDataMax = 255;
+ tuple->TupleOffset = 0;
+ tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY;
+ tuple->Attributes = 0;
+
+ ret = pcmcia_get_first_tuple(p_dev, tuple);
+ while (!ret) {
+ cistpl_cftable_entry_t *cfg = &cfg_mem->parse.cftable_entry;
+
+ if (pcmcia_get_tuple_data(p_dev, tuple))
+ goto next_entry;
+
+ if (pcmcia_parse_tuple(p_dev, tuple, &cfg_mem->parse))
+ goto next_entry;
+
+ /* default values */
+ p_dev->conf.ConfigIndex = cfg->index;
+ if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
+ cfg_mem->dflt = *cfg;
+
+ ret = conf_check(p_dev, cfg, &cfg_mem->dflt, vcc, priv_data);
+ if (!ret)
+ break;
+
+next_entry:
+ ret = pcmcia_get_next_tuple(p_dev, tuple);
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL(pcmcia_loop_config);
diff --git a/drivers/pcmcia/socket_sysfs.c b/drivers/pcmcia/socket_sysfs.c
index 006a29e..ff9a3bb 100644
--- a/drivers/pcmcia/socket_sysfs.c
+++ b/drivers/pcmcia/socket_sysfs.c
@@ -316,27 +316,18 @@
char *buf, loff_t off, size_t count)
{
struct pcmcia_socket *s = to_socket(container_of(kobj, struct device, kobj));
- cisdump_t *cis;
int error;
if (off)
return -EINVAL;
- if (count >= 0x200)
+ if (count >= CISTPL_MAX_CIS_SIZE)
return -EINVAL;
if (!(s->state & SOCKET_PRESENT))
return -ENODEV;
- cis = kzalloc(sizeof(cisdump_t), GFP_KERNEL);
- if (!cis)
- return -ENOMEM;
-
- cis->Length = count + 1;
- memcpy(cis->Data, buf, count);
-
- error = pcmcia_replace_cis(s, cis);
- kfree(cis);
+ error = pcmcia_replace_cis(s, buf, count);
if (error)
return -EIO;
diff --git a/drivers/scsi/pcmcia/aha152x_stub.c b/drivers/scsi/pcmcia/aha152x_stub.c
index 2dd0dc9..165ff88 100644
--- a/drivers/scsi/pcmcia/aha152x_stub.c
+++ b/drivers/scsi/pcmcia/aha152x_stub.c
@@ -140,44 +140,41 @@
#define CS_CHECK(fn, ret) \
do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
+static int aha152x_config_check(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cfg,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ /* For New Media T&J, look for a SCSI window */
+ if (cfg->io.win[0].len >= 0x20)
+ p_dev->io.BasePort1 = cfg->io.win[0].base;
+ else if ((cfg->io.nwin > 1) &&
+ (cfg->io.win[1].len >= 0x20))
+ p_dev->io.BasePort1 = cfg->io.win[1].base;
+ if ((cfg->io.nwin > 0) &&
+ (p_dev->io.BasePort1 < 0xffff)) {
+ if (!pcmcia_request_io(p_dev, &p_dev->io))
+ return 0;
+ }
+ return -EINVAL;
+}
+
static int aha152x_config_cs(struct pcmcia_device *link)
{
scsi_info_t *info = link->priv;
struct aha152x_setup s;
- tuple_t tuple;
- cisparse_t parse;
- int i, last_ret, last_fn;
- u_char tuple_data[64];
+ int last_ret, last_fn;
struct Scsi_Host *host;
-
+
DEBUG(0, "aha152x_config(0x%p)\n", link);
- tuple.TupleData = tuple_data;
- tuple.TupleDataMax = 64;
- tuple.TupleOffset = 0;
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- tuple.Attributes = 0;
- CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
- while (1) {
- if (pcmcia_get_tuple_data(link, &tuple) != 0 ||
- pcmcia_parse_tuple(link, &tuple, &parse) != 0)
- goto next_entry;
- /* For New Media T&J, look for a SCSI window */
- if (parse.cftable_entry.io.win[0].len >= 0x20)
- link->io.BasePort1 = parse.cftable_entry.io.win[0].base;
- else if ((parse.cftable_entry.io.nwin > 1) &&
- (parse.cftable_entry.io.win[1].len >= 0x20))
- link->io.BasePort1 = parse.cftable_entry.io.win[1].base;
- if ((parse.cftable_entry.io.nwin > 0) &&
- (link->io.BasePort1 < 0xffff)) {
- link->conf.ConfigIndex = parse.cftable_entry.index;
- i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS) break;
- }
- next_entry:
- CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple));
+ last_ret = pcmcia_loop_config(link, aha152x_config_check, NULL);
+ if (last_ret) {
+ cs_error(link, RequestIO, last_ret);
+ goto failed;
}
-
+
CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
@@ -208,6 +205,7 @@
cs_failed:
cs_error(link, last_fn, last_ret);
+failed:
aha152x_release_cs(link);
return -ENODEV;
}
diff --git a/drivers/scsi/pcmcia/fdomain_stub.c b/drivers/scsi/pcmcia/fdomain_stub.c
index d8b9935..06254f4 100644
--- a/drivers/scsi/pcmcia/fdomain_stub.c
+++ b/drivers/scsi/pcmcia/fdomain_stub.c
@@ -123,34 +123,30 @@
#define CS_CHECK(fn, ret) \
do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
+static int fdomain_config_check(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cfg,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ p_dev->io.BasePort1 = cfg->io.win[0].base;
+ return pcmcia_request_io(p_dev, &p_dev->io);
+}
+
+
static int fdomain_config(struct pcmcia_device *link)
{
scsi_info_t *info = link->priv;
- tuple_t tuple;
- cisparse_t parse;
- int i, last_ret, last_fn;
- u_char tuple_data[64];
+ int last_ret, last_fn;
char str[22];
struct Scsi_Host *host;
DEBUG(0, "fdomain_config(0x%p)\n", link);
- tuple.TupleData = tuple_data;
- tuple.TupleDataMax = 64;
- tuple.TupleOffset = 0;
-
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
- while (1) {
- if (pcmcia_get_tuple_data(link, &tuple) != 0 ||
- pcmcia_parse_tuple(link, &tuple, &parse) != 0)
- goto next_entry;
- link->conf.ConfigIndex = parse.cftable_entry.index;
- link->io.BasePort1 = parse.cftable_entry.io.win[0].base;
- i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS) break;
- next_entry:
- CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple));
+ last_ret = pcmcia_loop_config(link, fdomain_config_check, NULL);
+ if (last_ret) {
+ cs_error(link, RequestIO, last_ret);
+ goto failed;
}
CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
@@ -181,6 +177,7 @@
cs_failed:
cs_error(link, last_fn, last_ret);
+failed:
fdomain_release(link);
return -ENODEV;
} /* fdomain_config */
diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c
index a221b6e..7c19bf2 100644
--- a/drivers/scsi/pcmcia/nsp_cs.c
+++ b/drivers/scsi/pcmcia/nsp_cs.c
@@ -1607,133 +1607,129 @@
is received, to configure the PCMCIA socket, and to make the
ethernet device available to the system.
======================================================================*/
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-/*====================================================================*/
+
+struct nsp_cs_configdata {
+ nsp_hw_data *data;
+ win_req_t req;
+};
+
+static int nsp_cs_config_check(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cfg,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ struct nsp_cs_configdata *cfg_mem = priv_data;
+
+ if (cfg->index == 0)
+ return -ENODEV;
+
+ /* Does this card need audio output? */
+ if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
+ p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
+ p_dev->conf.Status = CCSR_AUDIO_ENA;
+ }
+
+ /* Use power settings for Vcc and Vpp if present */
+ /* Note that the CIS values need to be rescaled */
+ if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM)) {
+ if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM]/10000)
+ return -ENODEV;
+ else if (dflt->vcc.present & (1<<CISTPL_POWER_VNOM)) {
+ if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM]/10000)
+ return -ENODEV;
+ }
+
+ if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) {
+ p_dev->conf.Vpp =
+ cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+ } else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM)) {
+ p_dev->conf.Vpp =
+ dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+ }
+
+ /* Do we need to allocate an interrupt? */
+ if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
+ p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+
+ /* IO window settings */
+ p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+ if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+ cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+ if (!(io->flags & CISTPL_IO_8BIT))
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+ if (!(io->flags & CISTPL_IO_16BIT))
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+ p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
+ p_dev->io.BasePort1 = io->win[0].base;
+ p_dev->io.NumPorts1 = io->win[0].len;
+ if (io->nwin > 1) {
+ p_dev->io.Attributes2 = p_dev->io.Attributes1;
+ p_dev->io.BasePort2 = io->win[1].base;
+ p_dev->io.NumPorts2 = io->win[1].len;
+ }
+ /* This reserves IO space but doesn't actually enable it */
+ if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+ goto next_entry;
+ }
+
+ if ((cfg->mem.nwin > 0) || (dflt->mem.nwin > 0)) {
+ memreq_t map;
+ cistpl_mem_t *mem =
+ (cfg->mem.nwin) ? &cfg->mem : &dflt->mem;
+ cfg_mem->req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM;
+ cfg_mem->req.Attributes |= WIN_ENABLE;
+ cfg_mem->req.Base = mem->win[0].host_addr;
+ cfg_mem->req.Size = mem->win[0].len;
+ if (cfg_mem->req.Size < 0x1000)
+ cfg_mem->req.Size = 0x1000;
+ cfg_mem->req.AccessSpeed = 0;
+ if (pcmcia_request_window(&p_dev, &cfg_mem->req, &p_dev->win) != 0)
+ goto next_entry;
+ map.Page = 0; map.CardOffset = mem->win[0].card_addr;
+ if (pcmcia_map_mem_page(p_dev->win, &map) != 0)
+ goto next_entry;
+
+ cfg_mem->data->MmioAddress = (unsigned long) ioremap_nocache(cfg_mem->req.Base, cfg_mem->req.Size);
+ cfg_mem->data->MmioLength = cfg_mem->req.Size;
+ }
+ /* If we got this far, we're cool! */
+ return 0;
+ }
+
+next_entry:
+ nsp_dbg(NSP_DEBUG_INIT, "next");
+ pcmcia_disable_device(p_dev);
+ return -ENODEV;
+}
+
static int nsp_cs_config(struct pcmcia_device *link)
{
int ret;
scsi_info_t *info = link->priv;
- tuple_t tuple;
- cisparse_t parse;
- int last_ret, last_fn;
- unsigned char tuple_data[64];
- config_info_t conf;
- win_req_t req;
- memreq_t map;
- cistpl_cftable_entry_t dflt = { 0 };
+ struct nsp_cs_configdata *cfg_mem;
struct Scsi_Host *host;
nsp_hw_data *data = &nsp_data_base;
nsp_dbg(NSP_DEBUG_INIT, "in");
- tuple.Attributes = 0;
- tuple.TupleData = tuple_data;
- tuple.TupleDataMax = sizeof(tuple_data);
- tuple.TupleOffset = 0;
+ cfg_mem = kzalloc(sizeof(cfg_mem), GFP_KERNEL);
+ if (!cfg_mem)
+ return -ENOMEM;
+ cfg_mem->data = data;
- /* Look up the current Vcc */
- CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(link, &conf));
-
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
- while (1) {
- cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
-
- if (pcmcia_get_tuple_data(link, &tuple) != 0 ||
- pcmcia_parse_tuple(link, &tuple, &parse) != 0)
- goto next_entry;
-
- if (cfg->flags & CISTPL_CFTABLE_DEFAULT) { dflt = *cfg; }
- if (cfg->index == 0) { goto next_entry; }
- link->conf.ConfigIndex = cfg->index;
-
- /* Does this card need audio output? */
- if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
- link->conf.Attributes |= CONF_ENABLE_SPKR;
- link->conf.Status = CCSR_AUDIO_ENA;
- }
-
- /* Use power settings for Vcc and Vpp if present */
- /* Note that the CIS values need to be rescaled */
- if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM)) {
- if (conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM]/10000) {
- goto next_entry;
- }
- } else if (dflt.vcc.present & (1<<CISTPL_POWER_VNOM)) {
- if (conf.Vcc != dflt.vcc.param[CISTPL_POWER_VNOM]/10000) {
- goto next_entry;
- }
- }
-
- if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) {
- link->conf.Vpp =
- cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
- } else if (dflt.vpp1.present & (1 << CISTPL_POWER_VNOM)) {
- link->conf.Vpp =
- dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
- }
-
- /* Do we need to allocate an interrupt? */
- if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1) {
- link->conf.Attributes |= CONF_ENABLE_IRQ;
- }
-
- /* IO window settings */
- link->io.NumPorts1 = link->io.NumPorts2 = 0;
- if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
- cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (!(io->flags & CISTPL_IO_8BIT))
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(io->flags & CISTPL_IO_16BIT))
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
- link->io.BasePort1 = io->win[0].base;
- link->io.NumPorts1 = io->win[0].len;
- if (io->nwin > 1) {
- link->io.Attributes2 = link->io.Attributes1;
- link->io.BasePort2 = io->win[1].base;
- link->io.NumPorts2 = io->win[1].len;
- }
- /* This reserves IO space but doesn't actually enable it */
- if (pcmcia_request_io(link, &link->io) != 0)
- goto next_entry;
- }
-
- if ((cfg->mem.nwin > 0) || (dflt.mem.nwin > 0)) {
- cistpl_mem_t *mem =
- (cfg->mem.nwin) ? &cfg->mem : &dflt.mem;
- req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM;
- req.Attributes |= WIN_ENABLE;
- req.Base = mem->win[0].host_addr;
- req.Size = mem->win[0].len;
- if (req.Size < 0x1000) {
- req.Size = 0x1000;
- }
- req.AccessSpeed = 0;
- if (pcmcia_request_window(&link, &req, &link->win) != 0)
- goto next_entry;
- map.Page = 0; map.CardOffset = mem->win[0].card_addr;
- if (pcmcia_map_mem_page(link->win, &map) != 0)
- goto next_entry;
-
- data->MmioAddress = (unsigned long)ioremap_nocache(req.Base, req.Size);
- data->MmioLength = req.Size;
- }
- /* If we got this far, we're cool! */
- break;
-
- next_entry:
- nsp_dbg(NSP_DEBUG_INIT, "next");
- pcmcia_disable_device(link);
- CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple));
- }
+ ret = pcmcia_loop_config(link, nsp_cs_config_check, cfg_mem);
+ goto cs_failed;
if (link->conf.Attributes & CONF_ENABLE_IRQ) {
- CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
+ if (pcmcia_request_irq(link, &link->irq))
+ goto cs_failed;
}
- CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
+
+ ret = pcmcia_request_configuration(link, &link->conf);
+ if (ret)
+ goto cs_failed;
if (free_ports) {
if (link->io.BasePort1) {
@@ -1791,20 +1787,20 @@
printk(" & 0x%04x-0x%04x", link->io.BasePort2,
link->io.BasePort2+link->io.NumPorts2-1);
if (link->win)
- printk(", mem 0x%06lx-0x%06lx", req.Base,
- req.Base+req.Size-1);
+ printk(", mem 0x%06lx-0x%06lx", cfg_mem->req.Base,
+ cfg_mem->req.Base+cfg_mem->req.Size-1);
printk("\n");
+ kfree(cfg_mem);
return 0;
cs_failed:
nsp_dbg(NSP_DEBUG_INIT, "config fail");
- cs_error(link, last_fn, last_ret);
nsp_cs_release(link);
+ kfree(cfg_mem);
return -ENODEV;
} /* nsp_cs_config */
-#undef CS_CHECK
/*======================================================================
diff --git a/drivers/scsi/pcmcia/qlogic_stub.c b/drivers/scsi/pcmcia/qlogic_stub.c
index 67c5a58..20c3e5e 100644
--- a/drivers/scsi/pcmcia/qlogic_stub.c
+++ b/drivers/scsi/pcmcia/qlogic_stub.c
@@ -195,39 +195,33 @@
#define CS_CHECK(fn, ret) \
do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
+static int qlogic_config_check(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cfg,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ p_dev->io.BasePort1 = cfg->io.win[0].base;
+ p_dev->io.NumPorts1 = cfg->io.win[0].len;
+
+ if (p_dev->io.BasePort1 == 0)
+ return -ENODEV;
+
+ return pcmcia_request_io(p_dev, &p_dev->io);
+}
+
static int qlogic_config(struct pcmcia_device * link)
{
scsi_info_t *info = link->priv;
- tuple_t tuple;
- cisparse_t parse;
- int i, last_ret, last_fn;
- unsigned short tuple_data[32];
+ int last_ret, last_fn;
struct Scsi_Host *host;
DEBUG(0, "qlogic_config(0x%p)\n", link);
- info->manf_id = link->manf_id;
-
- tuple.TupleData = (cisdata_t *) tuple_data;
- tuple.TupleDataMax = 64;
- tuple.TupleOffset = 0;
-
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
- while (1) {
- if (pcmcia_get_tuple_data(link, &tuple) != 0 ||
- pcmcia_parse_tuple(link, &tuple, &parse) != 0)
- goto next_entry;
- link->conf.ConfigIndex = parse.cftable_entry.index;
- link->io.BasePort1 = parse.cftable_entry.io.win[0].base;
- link->io.NumPorts1 = parse.cftable_entry.io.win[0].len;
- if (link->io.BasePort1 != 0) {
- i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS)
- break;
- }
- next_entry:
- CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple));
+ last_ret = pcmcia_loop_config(link, qlogic_config_check, NULL);
+ if (last_ret) {
+ cs_error(link, RequestIO, last_ret);
+ goto failed;
}
CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
@@ -262,6 +256,7 @@
cs_failed:
cs_error(link, last_fn, last_ret);
pcmcia_disable_device(link);
+failed:
return -ENODEV;
} /* qlogic_config */
diff --git a/drivers/scsi/pcmcia/sym53c500_cs.c b/drivers/scsi/pcmcia/sym53c500_cs.c
index 0be232b..b330c11 100644
--- a/drivers/scsi/pcmcia/sym53c500_cs.c
+++ b/drivers/scsi/pcmcia/sym53c500_cs.c
@@ -700,15 +700,27 @@
#define CS_CHECK(fn, ret) \
do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
+static int SYM53C500_config_check(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cfg,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ p_dev->io.BasePort1 = cfg->io.win[0].base;
+ p_dev->io.NumPorts1 = cfg->io.win[0].len;
+
+ if (p_dev->io.BasePort1 == 0)
+ return -ENODEV;
+
+ return pcmcia_request_io(p_dev, &p_dev->io);
+}
+
static int
SYM53C500_config(struct pcmcia_device *link)
{
struct scsi_info_t *info = link->priv;
- tuple_t tuple;
- cisparse_t parse;
- int i, last_ret, last_fn;
+ int last_ret, last_fn;
int irq_level, port_base;
- unsigned short tuple_data[32];
struct Scsi_Host *host;
struct scsi_host_template *tpnt = &sym53c500_driver_template;
struct sym53c500_data *data;
@@ -717,27 +729,10 @@
info->manf_id = link->manf_id;
- tuple.TupleData = (cisdata_t *)tuple_data;
- tuple.TupleDataMax = 64;
- tuple.TupleOffset = 0;
-
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
- while (1) {
- if (pcmcia_get_tuple_data(link, &tuple) != 0 ||
- pcmcia_parse_tuple(link, &tuple, &parse) != 0)
- goto next_entry;
- link->conf.ConfigIndex = parse.cftable_entry.index;
- link->io.BasePort1 = parse.cftable_entry.io.win[0].base;
- link->io.NumPorts1 = parse.cftable_entry.io.win[0].len;
-
- if (link->io.BasePort1 != 0) {
- i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS)
- break;
- }
-next_entry:
- CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple));
+ last_ret = pcmcia_loop_config(link, SYM53C500_config_check, NULL);
+ if (last_ret) {
+ cs_error(link, RequestIO, last_ret);
+ goto failed;
}
CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
@@ -831,6 +826,7 @@
cs_failed:
cs_error(link, last_fn, last_ret);
+failed:
SYM53C500_release(link);
return -ENODEV;
} /* SYM53C500_config */
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index 164d2a4..7e00e67 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -439,43 +439,57 @@
return pcmcia_parse_tuple(handle, tuple, parse);
}
-static int
-next_tuple(struct pcmcia_device *handle, tuple_t * tuple, cisparse_t * parse)
+/*====================================================================*/
+
+static int simple_config_check(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cf,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
{
- int i;
- i = pcmcia_get_next_tuple(handle, tuple);
- if (i != CS_SUCCESS)
- return CS_NO_MORE_ITEMS;
- i = pcmcia_get_tuple_data(handle, tuple);
- if (i != CS_SUCCESS)
- return i;
- return pcmcia_parse_tuple(handle, tuple, parse);
+ static const int size_table[2] = { 8, 16 };
+ int *try = priv_data;
+
+ if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
+ p_dev->conf.Vpp =
+ cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+
+ if ((cf->io.nwin > 0) && (cf->io.win[0].len == size_table[(*try >> 1)])
+ && (cf->io.win[0].base != 0)) {
+ p_dev->io.BasePort1 = cf->io.win[0].base;
+ p_dev->io.IOAddrLines = ((*try & 0x1) == 0) ?
+ 16 : cf->io.flags & CISTPL_IO_LINES_MASK;
+ if (!pcmcia_request_io(p_dev, &p_dev->io))
+ return 0;
+ }
+ return -EINVAL;
}
-/*====================================================================*/
+static int simple_config_check_notpicky(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cf,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ static const unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
+ int j;
+
+ if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
+ for (j = 0; j < 5; j++) {
+ p_dev->io.BasePort1 = base[j];
+ p_dev->io.IOAddrLines = base[j] ? 16 : 3;
+ if (!pcmcia_request_io(p_dev, &p_dev->io))
+ return 0;
+ }
+ }
+ return -ENODEV;
+}
static int simple_config(struct pcmcia_device *link)
{
- static const unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
- static const int size_table[2] = { 8, 16 };
struct serial_info *info = link->priv;
- struct serial_cfg_mem *cfg_mem;
- tuple_t *tuple;
- u_char *buf;
- cisparse_t *parse;
- cistpl_cftable_entry_t *cf;
config_info_t config;
- int i, j, try;
- int s;
-
- cfg_mem = kmalloc(sizeof(struct serial_cfg_mem), GFP_KERNEL);
- if (!cfg_mem)
- return -1;
-
- tuple = &cfg_mem->tuple;
- parse = &cfg_mem->parse;
- cf = &parse->cftable_entry;
- buf = cfg_mem->buf;
+ int i, try;
/* If the card is already configured, look up the port and irq */
i = pcmcia_get_configuration_info(link, &config);
@@ -490,70 +504,28 @@
info->slave = 1;
}
if (info->slave) {
- kfree(cfg_mem);
return setup_serial(link, info, port, config.AssignedIRQ);
}
}
- /* First pass: look for a config entry that looks normal. */
- tuple->TupleData = (cisdata_t *) buf;
- tuple->TupleOffset = 0;
- tuple->TupleDataMax = 255;
- tuple->Attributes = 0;
- tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY;
- /* Two tries: without IO aliases, then with aliases */
- for (s = 0; s < 2; s++) {
- for (try = 0; try < 2; try++) {
- i = first_tuple(link, tuple, parse);
- while (i != CS_NO_MORE_ITEMS) {
- if (i != CS_SUCCESS)
- goto next_entry;
- if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
- link->conf.Vpp =
- cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
- if ((cf->io.nwin > 0) && (cf->io.win[0].len == size_table[s]) &&
- (cf->io.win[0].base != 0)) {
- link->conf.ConfigIndex = cf->index;
- link->io.BasePort1 = cf->io.win[0].base;
- link->io.IOAddrLines = (try == 0) ?
- 16 : cf->io.flags & CISTPL_IO_LINES_MASK;
- i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS)
- goto found_port;
- }
-next_entry:
- i = next_tuple(link, tuple, parse);
- }
- }
- }
+ /* First pass: look for a config entry that looks normal.
+ * Two tries: without IO aliases, then with aliases */
+ for (try = 0; try < 4; try++)
+ if (!pcmcia_loop_config(link, simple_config_check, &try))
+ goto found_port;
+
/* Second pass: try to find an entry that isn't picky about
its base address, then try to grab any standard serial port
address, and finally try to get any free port. */
- i = first_tuple(link, tuple, parse);
- while (i != CS_NO_MORE_ITEMS) {
- if ((i == CS_SUCCESS) && (cf->io.nwin > 0) &&
- ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
- link->conf.ConfigIndex = cf->index;
- for (j = 0; j < 5; j++) {
- link->io.BasePort1 = base[j];
- link->io.IOAddrLines = base[j] ? 16 : 3;
- i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS)
- goto found_port;
- }
- }
- i = next_tuple(link, tuple, parse);
- }
+ if (!pcmcia_loop_config(link, simple_config_check_notpicky, NULL))
+ goto found_port;
- found_port:
- if (i != CS_SUCCESS) {
- printk(KERN_NOTICE
- "serial_cs: no usable port range found, giving up\n");
- cs_error(link, RequestIO, i);
- kfree(cfg_mem);
- return -1;
- }
+ printk(KERN_NOTICE
+ "serial_cs: no usable port range found, giving up\n");
+ cs_error(link, RequestIO, i);
+ return -1;
+found_port:
i = pcmcia_request_irq(link, &link->irq);
if (i != CS_SUCCESS) {
cs_error(link, RequestIRQ, i);
@@ -571,86 +543,74 @@
i = pcmcia_request_configuration(link, &link->conf);
if (i != CS_SUCCESS) {
cs_error(link, RequestConfiguration, i);
- kfree(cfg_mem);
return -1;
}
- kfree(cfg_mem);
return setup_serial(link, info, link->io.BasePort1, link->irq.AssignedIRQ);
}
-static int multi_config(struct pcmcia_device * link)
+static int multi_config_check(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cf,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ int *base2 = priv_data;
+
+ /* The quad port cards have bad CIS's, so just look for a
+ window larger than 8 ports and assume it will be right */
+ if ((cf->io.nwin == 1) && (cf->io.win[0].len > 8)) {
+ p_dev->io.BasePort1 = cf->io.win[0].base;
+ p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
+ if (!pcmcia_request_io(p_dev, &p_dev->io)) {
+ *base2 = p_dev->io.BasePort1 + 8;
+ return 0;
+ }
+ }
+ return -ENODEV;
+}
+
+static int multi_config_check_notpicky(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cf,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ int *base2 = priv_data;
+
+ if (cf->io.nwin == 2) {
+ p_dev->io.BasePort1 = cf->io.win[0].base;
+ p_dev->io.BasePort2 = cf->io.win[1].base;
+ p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
+ if (!pcmcia_request_io(p_dev, &p_dev->io)) {
+ *base2 = p_dev->io.BasePort2;
+ return 0;
+ }
+ }
+ return -ENODEV;
+}
+
+static int multi_config(struct pcmcia_device *link)
{
struct serial_info *info = link->priv;
- struct serial_cfg_mem *cfg_mem;
- tuple_t *tuple;
- u_char *buf;
- cisparse_t *parse;
- cistpl_cftable_entry_t *cf;
- int i, rc, base2 = 0;
-
- cfg_mem = kmalloc(sizeof(struct serial_cfg_mem), GFP_KERNEL);
- if (!cfg_mem)
- return -1;
- tuple = &cfg_mem->tuple;
- parse = &cfg_mem->parse;
- cf = &parse->cftable_entry;
- buf = cfg_mem->buf;
-
- tuple->TupleData = (cisdata_t *) buf;
- tuple->TupleOffset = 0;
- tuple->TupleDataMax = 255;
- tuple->Attributes = 0;
- tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY;
+ int i, base2 = 0;
/* First, look for a generic full-sized window */
link->io.NumPorts1 = info->multi * 8;
- i = first_tuple(link, tuple, parse);
- while (i != CS_NO_MORE_ITEMS) {
- /* The quad port cards have bad CIS's, so just look for a
- window larger than 8 ports and assume it will be right */
- if ((i == CS_SUCCESS) && (cf->io.nwin == 1) &&
- (cf->io.win[0].len > 8)) {
- link->conf.ConfigIndex = cf->index;
- link->io.BasePort1 = cf->io.win[0].base;
- link->io.IOAddrLines =
- cf->io.flags & CISTPL_IO_LINES_MASK;
- i = pcmcia_request_io(link, &link->io);
- base2 = link->io.BasePort1 + 8;
- if (i == CS_SUCCESS)
- break;
- }
- i = next_tuple(link, tuple, parse);
- }
-
- /* If that didn't work, look for two windows */
- if (i != CS_SUCCESS) {
+ if (pcmcia_loop_config(link, multi_config_check, &base2)) {
+ /* If that didn't work, look for two windows */
link->io.NumPorts1 = link->io.NumPorts2 = 8;
info->multi = 2;
- i = first_tuple(link, tuple, parse);
- while (i != CS_NO_MORE_ITEMS) {
- if ((i == CS_SUCCESS) && (cf->io.nwin == 2)) {
- link->conf.ConfigIndex = cf->index;
- link->io.BasePort1 = cf->io.win[0].base;
- link->io.BasePort2 = cf->io.win[1].base;
- link->io.IOAddrLines =
- cf->io.flags & CISTPL_IO_LINES_MASK;
- i = pcmcia_request_io(link, &link->io);
- base2 = link->io.BasePort2;
- if (i == CS_SUCCESS)
- break;
- }
- i = next_tuple(link, tuple, parse);
+ if (pcmcia_loop_config(link, multi_config_check_notpicky,
+ &base2)) {
+ printk(KERN_NOTICE "serial_cs: no usable port range"
+ "found, giving up\n");
+ return -ENODEV;
}
}
- if (i != CS_SUCCESS) {
- cs_error(link, RequestIO, i);
- rc = -1;
- goto free_cfg_mem;
- }
-
i = pcmcia_request_irq(link, &link->irq);
if (i != CS_SUCCESS) {
+ /* FIXME: comment does not fit, error handling does not fit */
printk(KERN_NOTICE
"serial_cs: no usable port range found, giving up\n");
cs_error(link, RequestIRQ, i);
@@ -666,8 +626,7 @@
i = pcmcia_request_configuration(link, &link->conf);
if (i != CS_SUCCESS) {
cs_error(link, RequestConfiguration, i);
- rc = -1;
- goto free_cfg_mem;
+ return -ENODEV;
}
/* The Oxford Semiconductor OXCF950 cards are in fact single-port:
@@ -678,7 +637,8 @@
info->prodid == PRODID_POSSIO_GCC)) {
int err;
- if (cf->index == 1 || cf->index == 3) {
+ if (link->conf.ConfigIndex == 1 ||
+ link->conf.ConfigIndex == 3) {
err = setup_serial(link, info, base2,
link->irq.AssignedIRQ);
base2 = link->io.BasePort1;
@@ -695,18 +655,14 @@
if (info->quirk && info->quirk->wakeup)
info->quirk->wakeup(link);
- rc = 0;
- goto free_cfg_mem;
+ return 0;
}
setup_serial(link, info, link->io.BasePort1, link->irq.AssignedIRQ);
for (i = 0; i < info->multi - 1; i++)
setup_serial(link, info, base2 + (8 * i),
link->irq.AssignedIRQ);
- rc = 0;
-free_cfg_mem:
- kfree(cfg_mem);
- return rc;
+ return 0;
}
/*======================================================================
diff --git a/drivers/telephony/ixj_pcmcia.c b/drivers/telephony/ixj_pcmcia.c
index ff9a29b..347c3ed 100644
--- a/drivers/telephony/ixj_pcmcia.c
+++ b/drivers/telephony/ixj_pcmcia.c
@@ -124,65 +124,53 @@
return;
}
+static int ixj_config_check(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cfg,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+ cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
+ p_dev->io.BasePort1 = io->win[0].base;
+ p_dev->io.NumPorts1 = io->win[0].len;
+ if (io->nwin == 2) {
+ p_dev->io.BasePort2 = io->win[1].base;
+ p_dev->io.NumPorts2 = io->win[1].len;
+ }
+ if (!pcmcia_request_io(p_dev, &p_dev->io))
+ return 0;
+ }
+ return -ENODEV;
+}
+
static int ixj_config(struct pcmcia_device * link)
{
IXJ *j;
ixj_info_t *info;
- tuple_t tuple;
- u_short buf[128];
- cisparse_t parse;
- cistpl_cftable_entry_t *cfg = &parse.cftable_entry;
- cistpl_cftable_entry_t dflt =
- {
- 0
- };
- int last_ret, last_fn;
+ cistpl_cftable_entry_t dflt = { 0 };
+
info = link->priv;
DEBUG(0, "ixj_config(0x%p)\n", link);
- tuple.TupleData = (cisdata_t *) buf;
- tuple.TupleOffset = 0;
- tuple.TupleDataMax = 255;
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- tuple.Attributes = 0;
- CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
- while (1) {
- if (pcmcia_get_tuple_data(link, &tuple) != 0 ||
- pcmcia_parse_tuple(link, &tuple, &parse) != 0)
- goto next_entry;
- if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
- cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
- link->conf.ConfigIndex = cfg->index;
- link->io.BasePort1 = io->win[0].base;
- link->io.NumPorts1 = io->win[0].len;
- if (io->nwin == 2) {
- link->io.BasePort2 = io->win[1].base;
- link->io.NumPorts2 = io->win[1].len;
- }
- if (pcmcia_request_io(link, &link->io) != 0)
- goto next_entry;
- /* If we've got this far, we're done */
- break;
- }
- next_entry:
- if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
- dflt = *cfg;
- CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple));
- }
- CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
+ if (pcmcia_loop_config(link, ixj_config_check, &dflt))
+ goto cs_failed;
+
+ if (pcmcia_request_configuration(link, &link->conf))
+ goto cs_failed;
/*
* Register the card with the core.
- */
- j=ixj_pcmcia_probe(link->io.BasePort1,link->io.BasePort1 + 0x10);
+ */
+ j = ixj_pcmcia_probe(link->io.BasePort1, link->io.BasePort1 + 0x10);
info->ndev = 1;
info->node.major = PHONE_MAJOR;
link->dev_node = &info->node;
ixj_get_serial(link, j);
return 0;
+
cs_failed:
- cs_error(link, last_fn, last_ret);
ixj_cs_release(link);
return -ENODEV;
}
diff --git a/drivers/usb/host/sl811_cs.c b/drivers/usb/host/sl811_cs.c
index 5da63f5..ca733b7 100644
--- a/drivers/usb/host/sl811_cs.c
+++ b/drivers/usb/host/sl811_cs.c
@@ -155,97 +155,72 @@
platform_device_unregister(&platform_dev);
}
+static int sl811_cs_config_check(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cfg,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ if (cfg->index == 0)
+ return -ENODEV;
+
+ /* Use power settings for Vcc and Vpp if present */
+ /* Note that the CIS values need to be rescaled */
+ if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM)) {
+ if (cfg->vcc.param[CISTPL_POWER_VNOM]/10000 != vcc)
+ return -ENODEV;
+ } else if (dflt->vcc.present & (1<<CISTPL_POWER_VNOM)) {
+ if (dflt->vcc.param[CISTPL_POWER_VNOM]/10000 != vcc)
+ return -ENODEV;
+ }
+
+ if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
+ p_dev->conf.Vpp =
+ cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
+ else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM))
+ p_dev->conf.Vpp =
+ dflt->vpp1.param[CISTPL_POWER_VNOM]/10000;
+
+ /* we need an interrupt */
+ if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
+ p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+
+ /* IO window settings */
+ p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+ if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+ cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
+
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+ p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
+ p_dev->io.BasePort1 = io->win[0].base;
+ p_dev->io.NumPorts1 = io->win[0].len;
+
+ return pcmcia_request_io(p_dev, &p_dev->io);
+ }
+ pcmcia_disable_device(p_dev);
+ return -ENODEV;
+}
+
+
static int sl811_cs_config(struct pcmcia_device *link)
{
struct device *parent = &handle_to_dev(link);
local_info_t *dev = link->priv;
- tuple_t tuple;
- cisparse_t parse;
int last_fn, last_ret;
- u_char buf[64];
- config_info_t conf;
- cistpl_cftable_entry_t dflt = { 0 };
DBG(0, "sl811_cs_config(0x%p)\n", link);
- /* Look up the current Vcc */
- CS_CHECK(GetConfigurationInfo,
- pcmcia_get_configuration_info(link, &conf));
-
- tuple.Attributes = 0;
- tuple.TupleData = buf;
- tuple.TupleDataMax = sizeof(buf);
- tuple.TupleOffset = 0;
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
- while (1) {
- cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
-
- if (pcmcia_get_tuple_data(link, &tuple) != 0
- || pcmcia_parse_tuple(link, &tuple, &parse)
- != 0)
- goto next_entry;
-
- if (cfg->flags & CISTPL_CFTABLE_DEFAULT) {
- dflt = *cfg;
- }
-
- if (cfg->index == 0)
- goto next_entry;
-
- link->conf.ConfigIndex = cfg->index;
-
- /* Use power settings for Vcc and Vpp if present */
- /* Note that the CIS values need to be rescaled */
- if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM)) {
- if (cfg->vcc.param[CISTPL_POWER_VNOM]/10000
- != conf.Vcc)
- goto next_entry;
- } else if (dflt.vcc.present & (1<<CISTPL_POWER_VNOM)) {
- if (dflt.vcc.param[CISTPL_POWER_VNOM]/10000
- != conf.Vcc)
- goto next_entry;
- }
-
- if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
- link->conf.Vpp =
- cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
- else if (dflt.vpp1.present & (1<<CISTPL_POWER_VNOM))
- link->conf.Vpp =
- dflt.vpp1.param[CISTPL_POWER_VNOM]/10000;
-
- /* we need an interrupt */
- if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1)
- link->conf.Attributes |= CONF_ENABLE_IRQ;
-
- /* IO window settings */
- link->io.NumPorts1 = link->io.NumPorts2 = 0;
- if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
- cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
-
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
- link->io.BasePort1 = io->win[0].base;
- link->io.NumPorts1 = io->win[0].len;
-
- if (pcmcia_request_io(link, &link->io) != 0)
- goto next_entry;
- }
- break;
-
-next_entry:
- pcmcia_disable_device(link);
- last_ret = pcmcia_get_next_tuple(link, &tuple);
- }
+ if (pcmcia_loop_config(link, sl811_cs_config_check, NULL))
+ goto failed;
/* require an IRQ and two registers */
if (!link->io.NumPorts1 || link->io.NumPorts1 < 2)
- goto cs_failed;
+ goto failed;
if (link->conf.Attributes & CONF_ENABLE_IRQ)
CS_CHECK(RequestIRQ,
pcmcia_request_irq(link, &link->irq));
else
- goto cs_failed;
+ goto failed;
CS_CHECK(RequestConfiguration,
pcmcia_request_configuration(link, &link->conf));
@@ -266,8 +241,9 @@
if (sl811_hc_init(parent, link->io.BasePort1, link->irq.AssignedIRQ)
< 0) {
cs_failed:
- printk("sl811_cs_config failed\n");
cs_error(link, last_fn, last_ret);
+failed:
+ printk(KERN_WARNING "sl811_cs_config failed\n");
sl811_cs_release(link);
return -ENODEV;
}
diff --git a/include/pcmcia/cistpl.h b/include/pcmcia/cistpl.h
index e2e10c1..75a9d34 100644
--- a/include/pcmcia/cistpl.h
+++ b/include/pcmcia/cistpl.h
@@ -580,14 +580,8 @@
#define CISTPL_MAX_CIS_SIZE 0x200
-/* For ReplaceCIS */
-typedef struct cisdump_t {
- u_int Length;
- cisdata_t Data[CISTPL_MAX_CIS_SIZE];
-} cisdump_t;
-
-
-int pcmcia_replace_cis(struct pcmcia_socket *s, cisdump_t *cis);
+int pcmcia_replace_cis(struct pcmcia_socket *s,
+ const u8 *data, const size_t len);
/* don't use outside of PCMCIA core yet */
int pccard_get_next_tuple(struct pcmcia_socket *s, unsigned int func, tuple_t *tuple);
@@ -613,4 +607,12 @@
#define pcmcia_validate_cis(p_dev, info) \
pccard_validate_cis(p_dev->socket, p_dev->func, info)
+int pcmcia_loop_config(struct pcmcia_device *p_dev,
+ int (*conf_check) (struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cf,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data),
+ void *priv_data);
+
#endif /* LINUX_CISTPL_H */
diff --git a/include/pcmcia/ds.h b/include/pcmcia/ds.h
index b316027..2d36a4f 100644
--- a/include/pcmcia/ds.h
+++ b/include/pcmcia/ds.h
@@ -68,6 +68,12 @@
#define REGION_BAR_MASK 0xe000
#define REGION_BAR_SHIFT 13
+/* For ReplaceCIS */
+typedef struct cisdump_t {
+ u_int Length;
+ cisdata_t Data[CISTPL_MAX_CIS_SIZE];
+} cisdump_t;
+
typedef union ds_ioctl_arg_t {
adjust_t adjust;
config_info_t config;
diff --git a/include/pcmcia/ss.h b/include/pcmcia/ss.h
index ed919dd..e34bef0 100644
--- a/include/pcmcia/ss.h
+++ b/include/pcmcia/ss.h
@@ -199,8 +199,8 @@
io_window_t io[MAX_IO_WIN];
window_t win[MAX_WIN];
struct list_head cis_cache;
- u_int fake_cis_len;
- char *fake_cis;
+ size_t fake_cis_len;
+ u8 *fake_cis;
struct list_head socket_list;
struct completion socket_released;
