| /* | |
| * bf5xx-ac97.c -- AC97 support for the ADI blackfin chip. | |
| * | |
| * Author: Roy Huang | |
| * Created: 11th. June 2007 | |
| * Copyright: Analog Device Inc. | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| */ | |
| #include <linux/init.h> | |
| #include <linux/module.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/wait.h> | |
| #include <linux/delay.h> | |
| #include <linux/slab.h> | |
| #include <sound/core.h> | |
| #include <sound/pcm.h> | |
| #include <sound/ac97_codec.h> | |
| #include <sound/initval.h> | |
| #include <sound/soc.h> | |
| #include <asm/irq.h> | |
| #include <asm/portmux.h> | |
| #include <linux/mutex.h> | |
| #include <linux/gpio.h> | |
| #include "bf5xx-sport.h" | |
| #include "bf5xx-ac97.h" | |
| /* Anomaly notes: | |
| * 05000250 - AD1980 is running in TDM mode and RFS/TFS are generated by SPORT | |
| * contrtoller. But, RFSDIV and TFSDIV are always set to 16*16-1, | |
| * while the max AC97 data size is 13*16. The DIV is always larger | |
| * than data size. AD73311 and ad2602 are not running in TDM mode. | |
| * AD1836 and AD73322 depend on external RFS/TFS only. So, this | |
| * anomaly does not affect blackfin sound drivers. | |
| */ | |
| static struct sport_device *ac97_sport_handle; | |
| void bf5xx_pcm_to_ac97(struct ac97_frame *dst, const __u16 *src, | |
| size_t count, unsigned int chan_mask) | |
| { | |
| while (count--) { | |
| dst->ac97_tag = TAG_VALID; | |
| if (chan_mask & SP_FL) { | |
| dst->ac97_pcm_r = *src++; | |
| dst->ac97_tag |= TAG_PCM_RIGHT; | |
| } | |
| if (chan_mask & SP_FR) { | |
| dst->ac97_pcm_l = *src++; | |
| dst->ac97_tag |= TAG_PCM_LEFT; | |
| } | |
| #if defined(CONFIG_SND_BF5XX_MULTICHAN_SUPPORT) | |
| if (chan_mask & SP_SR) { | |
| dst->ac97_sl = *src++; | |
| dst->ac97_tag |= TAG_PCM_SL; | |
| } | |
| if (chan_mask & SP_SL) { | |
| dst->ac97_sr = *src++; | |
| dst->ac97_tag |= TAG_PCM_SR; | |
| } | |
| if (chan_mask & SP_LFE) { | |
| dst->ac97_lfe = *src++; | |
| dst->ac97_tag |= TAG_PCM_LFE; | |
| } | |
| if (chan_mask & SP_FC) { | |
| dst->ac97_center = *src++; | |
| dst->ac97_tag |= TAG_PCM_CENTER; | |
| } | |
| #endif | |
| dst++; | |
| } | |
| } | |
| EXPORT_SYMBOL(bf5xx_pcm_to_ac97); | |
| void bf5xx_ac97_to_pcm(const struct ac97_frame *src, __u16 *dst, | |
| size_t count) | |
| { | |
| while (count--) { | |
| *(dst++) = src->ac97_pcm_l; | |
| *(dst++) = src->ac97_pcm_r; | |
| src++; | |
| } | |
| } | |
| EXPORT_SYMBOL(bf5xx_ac97_to_pcm); | |
| static unsigned int sport_tx_curr_frag(struct sport_device *sport) | |
| { | |
| return sport->tx_curr_frag = sport_curr_offset_tx(sport) / | |
| sport->tx_fragsize; | |
| } | |
| static void enqueue_cmd(struct snd_ac97 *ac97, __u16 addr, __u16 data) | |
| { | |
| struct sport_device *sport = ac97_sport_handle; | |
| int *cmd_count = sport->private_data; | |
| int nextfrag = sport_tx_curr_frag(sport); | |
| struct ac97_frame *nextwrite; | |
| sport_incfrag(sport, &nextfrag, 1); | |
| nextwrite = (struct ac97_frame *)(sport->tx_buf + | |
| nextfrag * sport->tx_fragsize); | |
| pr_debug("sport->tx_buf:%p, nextfrag:0x%x nextwrite:%p, cmd_count:%d\n", | |
| sport->tx_buf, nextfrag, nextwrite, cmd_count[nextfrag]); | |
| nextwrite[cmd_count[nextfrag]].ac97_tag |= TAG_CMD; | |
| nextwrite[cmd_count[nextfrag]].ac97_addr = addr; | |
| nextwrite[cmd_count[nextfrag]].ac97_data = data; | |
| ++cmd_count[nextfrag]; | |
| pr_debug("ac97_sport: Inserting %02x/%04x into fragment %d\n", | |
| addr >> 8, data, nextfrag); | |
| } | |
| static unsigned short bf5xx_ac97_read(struct snd_ac97 *ac97, | |
| unsigned short reg) | |
| { | |
| struct sport_device *sport_handle = ac97_sport_handle; | |
| struct ac97_frame out_frame[2], in_frame[2]; | |
| pr_debug("%s enter 0x%x\n", __func__, reg); | |
| /* When dma descriptor is enabled, the register should not be read */ | |
| if (sport_handle->tx_run || sport_handle->rx_run) { | |
| pr_err("Could you send a mail to cliff.cai@analog.com " | |
| "to report this?\n"); | |
| return -EFAULT; | |
| } | |
| memset(&out_frame, 0, 2 * sizeof(struct ac97_frame)); | |
| memset(&in_frame, 0, 2 * sizeof(struct ac97_frame)); | |
| out_frame[0].ac97_tag = TAG_VALID | TAG_CMD; | |
| out_frame[0].ac97_addr = ((reg << 8) | 0x8000); | |
| sport_send_and_recv(sport_handle, (unsigned char *)&out_frame, | |
| (unsigned char *)&in_frame, | |
| 2 * sizeof(struct ac97_frame)); | |
| return in_frame[1].ac97_data; | |
| } | |
| void bf5xx_ac97_write(struct snd_ac97 *ac97, unsigned short reg, | |
| unsigned short val) | |
| { | |
| struct sport_device *sport_handle = ac97_sport_handle; | |
| pr_debug("%s enter 0x%x:0x%04x\n", __func__, reg, val); | |
| if (sport_handle->tx_run) { | |
| enqueue_cmd(ac97, (reg << 8), val); /* write */ | |
| enqueue_cmd(ac97, (reg << 8) | 0x8000, 0); /* read back */ | |
| } else { | |
| struct ac97_frame frame; | |
| memset(&frame, 0, sizeof(struct ac97_frame)); | |
| frame.ac97_tag = TAG_VALID | TAG_CMD; | |
| frame.ac97_addr = (reg << 8); | |
| frame.ac97_data = val; | |
| sport_send_and_recv(sport_handle, (unsigned char *)&frame, \ | |
| NULL, sizeof(struct ac97_frame)); | |
| } | |
| } | |
| static void bf5xx_ac97_warm_reset(struct snd_ac97 *ac97) | |
| { | |
| struct sport_device *sport_handle = ac97_sport_handle; | |
| u16 gpio = P_IDENT(sport_handle->pin_req[3]); | |
| pr_debug("%s enter\n", __func__); | |
| peripheral_free_list(sport_handle->pin_req); | |
| gpio_request(gpio, "bf5xx-ac97"); | |
| gpio_direction_output(gpio, 1); | |
| udelay(2); | |
| gpio_set_value(gpio, 0); | |
| udelay(1); | |
| gpio_free(gpio); | |
| peripheral_request_list(sport_handle->pin_req, "soc-audio"); | |
| } | |
| static void bf5xx_ac97_cold_reset(struct snd_ac97 *ac97) | |
| { | |
| #ifdef CONFIG_SND_BF5XX_HAVE_COLD_RESET | |
| pr_debug("%s enter\n", __func__); | |
| /* It is specified for bf548-ezkit */ | |
| gpio_set_value(CONFIG_SND_BF5XX_RESET_GPIO_NUM, 0); | |
| /* Keep reset pin low for 1 ms */ | |
| mdelay(1); | |
| gpio_set_value(CONFIG_SND_BF5XX_RESET_GPIO_NUM, 1); | |
| /* Wait for bit clock recover */ | |
| mdelay(1); | |
| #else | |
| pr_info("%s: Not implemented\n", __func__); | |
| #endif | |
| } | |
| static struct snd_ac97_bus_ops bf5xx_ac97_ops = { | |
| .read = bf5xx_ac97_read, | |
| .write = bf5xx_ac97_write, | |
| .warm_reset = bf5xx_ac97_warm_reset, | |
| .reset = bf5xx_ac97_cold_reset, | |
| }; | |
| #ifdef CONFIG_PM | |
| static int bf5xx_ac97_suspend(struct snd_soc_dai *dai) | |
| { | |
| struct sport_device *sport = snd_soc_dai_get_drvdata(dai); | |
| pr_debug("%s : sport %d\n", __func__, dai->id); | |
| if (!dai->active) | |
| return 0; | |
| if (dai->capture_active) | |
| sport_rx_stop(sport); | |
| if (dai->playback_active) | |
| sport_tx_stop(sport); | |
| return 0; | |
| } | |
| static int bf5xx_ac97_resume(struct snd_soc_dai *dai) | |
| { | |
| int ret; | |
| struct sport_device *sport = snd_soc_dai_get_drvdata(dai); | |
| pr_debug("%s : sport %d\n", __func__, dai->id); | |
| if (!dai->active) | |
| return 0; | |
| #if defined(CONFIG_SND_BF5XX_MULTICHAN_SUPPORT) | |
| ret = sport_set_multichannel(sport, 16, 0x3FF, 0x3FF, 1); | |
| #else | |
| ret = sport_set_multichannel(sport, 16, 0x1F, 0x1F, 1); | |
| #endif | |
| if (ret) { | |
| pr_err("SPORT is busy!\n"); | |
| return -EBUSY; | |
| } | |
| ret = sport_config_rx(sport, IRFS, 0xF, 0, (16*16-1)); | |
| if (ret) { | |
| pr_err("SPORT is busy!\n"); | |
| return -EBUSY; | |
| } | |
| ret = sport_config_tx(sport, ITFS, 0xF, 0, (16*16-1)); | |
| if (ret) { | |
| pr_err("SPORT is busy!\n"); | |
| return -EBUSY; | |
| } | |
| return 0; | |
| } | |
| #else | |
| #define bf5xx_ac97_suspend NULL | |
| #define bf5xx_ac97_resume NULL | |
| #endif | |
| static struct snd_soc_dai_driver bfin_ac97_dai = { | |
| .bus_control = true, | |
| .suspend = bf5xx_ac97_suspend, | |
| .resume = bf5xx_ac97_resume, | |
| .playback = { | |
| .stream_name = "AC97 Playback", | |
| .channels_min = 2, | |
| #if defined(CONFIG_SND_BF5XX_MULTICHAN_SUPPORT) | |
| .channels_max = 6, | |
| #else | |
| .channels_max = 2, | |
| #endif | |
| .rates = SNDRV_PCM_RATE_48000, | |
| .formats = SNDRV_PCM_FMTBIT_S16_LE, }, | |
| .capture = { | |
| .stream_name = "AC97 Capture", | |
| .channels_min = 2, | |
| .channels_max = 2, | |
| .rates = SNDRV_PCM_RATE_48000, | |
| .formats = SNDRV_PCM_FMTBIT_S16_LE, }, | |
| }; | |
| static const struct snd_soc_component_driver bfin_ac97_component = { | |
| .name = "bfin-ac97", | |
| }; | |
| static int asoc_bfin_ac97_probe(struct platform_device *pdev) | |
| { | |
| struct sport_device *sport_handle; | |
| int ret; | |
| #ifdef CONFIG_SND_BF5XX_HAVE_COLD_RESET | |
| /* Request PB3 as reset pin */ | |
| ret = devm_gpio_request_one(&pdev->dev, | |
| CONFIG_SND_BF5XX_RESET_GPIO_NUM, | |
| GPIOF_OUT_INIT_HIGH, "SND_AD198x RESET"); | |
| if (ret) { | |
| dev_err(&pdev->dev, | |
| "Failed to request GPIO_%d for reset: %d\n", | |
| CONFIG_SND_BF5XX_RESET_GPIO_NUM, ret); | |
| return ret; | |
| } | |
| #endif | |
| sport_handle = sport_init(pdev, 2, sizeof(struct ac97_frame), | |
| PAGE_SIZE); | |
| if (!sport_handle) { | |
| ret = -ENODEV; | |
| goto sport_err; | |
| } | |
| /*SPORT works in TDM mode to simulate AC97 transfers*/ | |
| #if defined(CONFIG_SND_BF5XX_MULTICHAN_SUPPORT) | |
| ret = sport_set_multichannel(sport_handle, 16, 0x3FF, 0x3FF, 1); | |
| #else | |
| ret = sport_set_multichannel(sport_handle, 16, 0x1F, 0x1F, 1); | |
| #endif | |
| if (ret) { | |
| pr_err("SPORT is busy!\n"); | |
| ret = -EBUSY; | |
| goto sport_config_err; | |
| } | |
| ret = sport_config_rx(sport_handle, IRFS, 0xF, 0, (16*16-1)); | |
| if (ret) { | |
| pr_err("SPORT is busy!\n"); | |
| ret = -EBUSY; | |
| goto sport_config_err; | |
| } | |
| ret = sport_config_tx(sport_handle, ITFS, 0xF, 0, (16*16-1)); | |
| if (ret) { | |
| pr_err("SPORT is busy!\n"); | |
| ret = -EBUSY; | |
| goto sport_config_err; | |
| } | |
| ret = snd_soc_set_ac97_ops(&bf5xx_ac97_ops); | |
| if (ret != 0) { | |
| dev_err(&pdev->dev, "Failed to set AC'97 ops: %d\n", ret); | |
| goto sport_config_err; | |
| } | |
| ret = snd_soc_register_component(&pdev->dev, &bfin_ac97_component, | |
| &bfin_ac97_dai, 1); | |
| if (ret) { | |
| pr_err("Failed to register DAI: %d\n", ret); | |
| goto sport_config_err; | |
| } | |
| ac97_sport_handle = sport_handle; | |
| return 0; | |
| sport_config_err: | |
| sport_done(sport_handle); | |
| sport_err: | |
| snd_soc_set_ac97_ops(NULL); | |
| return ret; | |
| } | |
| static int asoc_bfin_ac97_remove(struct platform_device *pdev) | |
| { | |
| struct sport_device *sport_handle = platform_get_drvdata(pdev); | |
| snd_soc_unregister_component(&pdev->dev); | |
| sport_done(sport_handle); | |
| snd_soc_set_ac97_ops(NULL); | |
| return 0; | |
| } | |
| static struct platform_driver asoc_bfin_ac97_driver = { | |
| .driver = { | |
| .name = "bfin-ac97", | |
| }, | |
| .probe = asoc_bfin_ac97_probe, | |
| .remove = asoc_bfin_ac97_remove, | |
| }; | |
| module_platform_driver(asoc_bfin_ac97_driver); | |
| MODULE_AUTHOR("Roy Huang"); | |
| MODULE_DESCRIPTION("AC97 driver for ADI Blackfin"); | |
| MODULE_LICENSE("GPL"); |