adapter_khz     10000

interface ftdi
ftdi_device_desc "Dual RS232-HS"
ftdi_vid_pid 0x0403 0x6010

ftdi_layout_init 0x0008 0x001b
ftdi_layout_signal nSRST -oe 0x0020

# ...

set _CHIPNAME riscv
jtag newtap $_CHIPNAME cpu -irlen 5 -expected-id 0x10e31913

set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME riscv -chain-position $_TARGETNAME
$_TARGETNAME configure -work-area-phys 0x80000000 -work-area-size 8096 -work-area-backup 1
#-rtos riscv

gdb_report_data_abort enable
gdb_report_register_access_error enable

# Expose an unimplemented CSR so we can test non-existent register access
# behavior.
riscv expose_csrs 2288

flash bank my_first_flash fespi 0x20000000 0 0 0 $_TARGETNAME
init
#reset
halt
flash protect 0 64 last off

echo "Ready for Remote Connections"