| # Makefile.in generated by automake 1.11.1 from Makefile.am. |
| # @configure_input@ |
| |
| # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, |
| # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, |
| # Inc. |
| # This Makefile.in is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY, to the extent permitted by law; without |
| # even the implied warranty of MERCHANTABILITY or FITNESS FOR A |
| # PARTICULAR PURPOSE. |
| |
| @SET_MAKE@ |
| |
| # -*- mode: makefile -*- |
| |
| #################################### |
| # Everything below here is generic # |
| #################################### |
| VPATH = @srcdir@ |
| pkgdatadir = $(datadir)/@PACKAGE@ |
| pkgincludedir = $(includedir)/@PACKAGE@ |
| pkglibdir = $(libdir)/@PACKAGE@ |
| pkglibexecdir = $(libexecdir)/@PACKAGE@ |
| am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd |
| install_sh_DATA = $(install_sh) -c -m 644 |
| install_sh_PROGRAM = $(install_sh) -c |
| install_sh_SCRIPT = $(install_sh) -c |
| INSTALL_HEADER = $(INSTALL_DATA) |
| transform = $(program_transform_name) |
| NORMAL_INSTALL = : |
| PRE_INSTALL = : |
| POST_INSTALL = : |
| NORMAL_UNINSTALL = : |
| PRE_UNINSTALL = : |
| POST_UNINSTALL = : |
| build_triplet = @build@ |
| host_triplet = @host@ |
| DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ |
| $(srcdir)/libvips-docs.sgml.in $(top_srcdir)/gtk-doc.make |
| subdir = doc/reference |
| ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 |
| am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ |
| $(top_srcdir)/configure.in |
| am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ |
| $(ACLOCAL_M4) |
| mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs |
| CONFIG_HEADER = $(top_builddir)/config.h |
| CONFIG_CLEAN_FILES = libvips-docs.sgml |
| CONFIG_CLEAN_VPATH_FILES = |
| SOURCES = |
| DIST_SOURCES = |
| am__tty_colors = \ |
| red=; grn=; lgn=; blu=; std= |
| DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) |
| ACLOCAL = @ACLOCAL@ |
| AMTAR = @AMTAR@ |
| AR = @AR@ |
| AS = @AS@ |
| AUTOCONF = @AUTOCONF@ |
| AUTOHEADER = @AUTOHEADER@ |
| AUTOMAKE = @AUTOMAKE@ |
| AWK = @AWK@ |
| CATALOGS = @CATALOGS@ |
| CATOBJEXT = @CATOBJEXT@ |
| CC = @CC@ |
| CCDEPMODE = @CCDEPMODE@ |
| CFLAGS = @CFLAGS@ |
| CPP = @CPP@ |
| CPPFLAGS = @CPPFLAGS@ |
| CXX = @CXX@ |
| CXXCPP = @CXXCPP@ |
| CXXDEPMODE = @CXXDEPMODE@ |
| CXXFLAGS = @CXXFLAGS@ |
| CYGPATH_W = @CYGPATH_W@ |
| DATADIRNAME = @DATADIRNAME@ |
| DEFS = @DEFS@ |
| DEPDIR = @DEPDIR@ |
| DLLTOOL = @DLLTOOL@ |
| DLLWRAP = @DLLWRAP@ |
| DSYMUTIL = @DSYMUTIL@ |
| DUMPBIN = @DUMPBIN@ |
| ECHO_C = @ECHO_C@ |
| ECHO_N = @ECHO_N@ |
| ECHO_T = @ECHO_T@ |
| EGREP = @EGREP@ |
| EXEEXT = @EXEEXT@ |
| EXIF_CFLAGS = @EXIF_CFLAGS@ |
| EXIF_LIBS = @EXIF_LIBS@ |
| FFTW3_CFLAGS = @FFTW3_CFLAGS@ |
| FFTW3_LIBS = @FFTW3_LIBS@ |
| FGREP = @FGREP@ |
| GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ |
| GMOFILES = @GMOFILES@ |
| GMSGFMT = @GMSGFMT@ |
| GREP = @GREP@ |
| GTHREAD_CFLAGS = @GTHREAD_CFLAGS@ |
| GTHREAD_LIBS = @GTHREAD_LIBS@ |
| GTKDOC_CHECK = @GTKDOC_CHECK@ |
| GTKDOC_MKPDF = @GTKDOC_MKPDF@ |
| GTKDOC_REBASE = @GTKDOC_REBASE@ |
| HTML_DIR = @HTML_DIR@ |
| IMAGE_MAGICK_CFLAGS = @IMAGE_MAGICK_CFLAGS@ |
| IMAGE_MAGICK_LIBS = @IMAGE_MAGICK_LIBS@ |
| IM_LIBDIR = @IM_LIBDIR@ |
| IM_MAJOR_VERSION = @IM_MAJOR_VERSION@ |
| IM_MICRO_VERSION = @IM_MICRO_VERSION@ |
| IM_MINOR_VERSION = @IM_MINOR_VERSION@ |
| IM_VERSION = @IM_VERSION@ |
| IM_VERSION_STRING = @IM_VERSION_STRING@ |
| INSTALL = @INSTALL@ |
| INSTALL_DATA = @INSTALL_DATA@ |
| INSTALL_PROGRAM = @INSTALL_PROGRAM@ |
| INSTALL_SCRIPT = @INSTALL_SCRIPT@ |
| INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ |
| INSTOBJEXT = @INSTOBJEXT@ |
| INTLLIBS = @INTLLIBS@ |
| JPEG_INCLUDES = @JPEG_INCLUDES@ |
| JPEG_LIBS = @JPEG_LIBS@ |
| LCMS_CFLAGS = @LCMS_CFLAGS@ |
| LCMS_LIBS = @LCMS_LIBS@ |
| LD = @LD@ |
| LDFLAGS = @LDFLAGS@ |
| LIBOBJS = @LIBOBJS@ |
| LIBOIL_CFLAGS = @LIBOIL_CFLAGS@ |
| LIBOIL_LIBS = @LIBOIL_LIBS@ |
| LIBRARY_AGE = @LIBRARY_AGE@ |
| LIBRARY_CURRENT = @LIBRARY_CURRENT@ |
| LIBRARY_REVISION = @LIBRARY_REVISION@ |
| LIBS = @LIBS@ |
| LIBTOOL = @LIBTOOL@ |
| LIPO = @LIPO@ |
| LN_S = @LN_S@ |
| LTLIBOBJS = @LTLIBOBJS@ |
| MAGICK_CFLAGS = @MAGICK_CFLAGS@ |
| MAGICK_LIBS = @MAGICK_LIBS@ |
| MAGICK_WAND_CFLAGS = @MAGICK_WAND_CFLAGS@ |
| MAGICK_WAND_LIBS = @MAGICK_WAND_LIBS@ |
| MAKEINFO = @MAKEINFO@ |
| MATIO_CFLAGS = @MATIO_CFLAGS@ |
| MATIO_LIBS = @MATIO_LIBS@ |
| MKDIR_P = @MKDIR_P@ |
| MKINSTALLDIRS = @MKINSTALLDIRS@ |
| MSGFMT = @MSGFMT@ |
| MSGFMT_OPTS = @MSGFMT_OPTS@ |
| NM = @NM@ |
| NMEDIT = @NMEDIT@ |
| OBJDUMP = @OBJDUMP@ |
| OBJEXT = @OBJEXT@ |
| OPENEXR_CFLAGS = @OPENEXR_CFLAGS@ |
| OPENEXR_LIBS = @OPENEXR_LIBS@ |
| OTOOL = @OTOOL@ |
| OTOOL64 = @OTOOL64@ |
| PACKAGE = @PACKAGE@ |
| PACKAGES_USED = @PACKAGES_USED@ |
| PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ |
| PACKAGE_NAME = @PACKAGE_NAME@ |
| PACKAGE_STRING = @PACKAGE_STRING@ |
| PACKAGE_TARNAME = @PACKAGE_TARNAME@ |
| PACKAGE_URL = @PACKAGE_URL@ |
| PACKAGE_VERSION = @PACKAGE_VERSION@ |
| PANGOFT2_CFLAGS = @PANGOFT2_CFLAGS@ |
| PANGOFT2_LIBS = @PANGOFT2_LIBS@ |
| PATH_SEPARATOR = @PATH_SEPARATOR@ |
| PKG_CONFIG = @PKG_CONFIG@ |
| PNG_CFLAGS = @PNG_CFLAGS@ |
| PNG_INCLUDES = @PNG_INCLUDES@ |
| PNG_LIBS = @PNG_LIBS@ |
| POFILES = @POFILES@ |
| POSUB = @POSUB@ |
| PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ |
| PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ |
| PYTHON = @PYTHON@ |
| PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@ |
| PYTHON_INCLUDES = @PYTHON_INCLUDES@ |
| PYTHON_PLATFORM = @PYTHON_PLATFORM@ |
| PYTHON_PREFIX = @PYTHON_PREFIX@ |
| PYTHON_VERSION = @PYTHON_VERSION@ |
| RANLIB = @RANLIB@ |
| REQUIRED_CFLAGS = @REQUIRED_CFLAGS@ |
| REQUIRED_LIBS = @REQUIRED_LIBS@ |
| SED = @SED@ |
| SET_MAKE = @SET_MAKE@ |
| SHELL = @SHELL@ |
| STRIP = @STRIP@ |
| TIFF_INCLUDES = @TIFF_INCLUDES@ |
| TIFF_LIBS = @TIFF_LIBS@ |
| USE_NLS = @USE_NLS@ |
| VERSION = @VERSION@ |
| VIPS_CFLAGS = @VIPS_CFLAGS@ |
| VIPS_CXX_LIBS = @VIPS_CXX_LIBS@ |
| VIPS_INCLUDES = @VIPS_INCLUDES@ |
| VIPS_LIBS = @VIPS_LIBS@ |
| XGETTEXT = @XGETTEXT@ |
| XMKMF = @XMKMF@ |
| X_CFLAGS = @X_CFLAGS@ |
| X_EXTRA_LIBS = @X_EXTRA_LIBS@ |
| X_LIBS = @X_LIBS@ |
| X_PRE_LIBS = @X_PRE_LIBS@ |
| ZIP_INCLUDES = @ZIP_INCLUDES@ |
| ZIP_LIBS = @ZIP_LIBS@ |
| abs_builddir = @abs_builddir@ |
| abs_srcdir = @abs_srcdir@ |
| abs_top_builddir = @abs_top_builddir@ |
| abs_top_srcdir = @abs_top_srcdir@ |
| ac_ct_CC = @ac_ct_CC@ |
| ac_ct_CXX = @ac_ct_CXX@ |
| ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ |
| am__include = @am__include@ |
| am__leading_dot = @am__leading_dot@ |
| am__quote = @am__quote@ |
| am__tar = @am__tar@ |
| am__untar = @am__untar@ |
| bindir = @bindir@ |
| build = @build@ |
| build_alias = @build_alias@ |
| build_cpu = @build_cpu@ |
| build_os = @build_os@ |
| build_vendor = @build_vendor@ |
| builddir = @builddir@ |
| datadir = @datadir@ |
| datarootdir = @datarootdir@ |
| docdir = @docdir@ |
| dvidir = @dvidir@ |
| exec_prefix = @exec_prefix@ |
| host = @host@ |
| host_alias = @host_alias@ |
| host_cpu = @host_cpu@ |
| host_os = @host_os@ |
| host_vendor = @host_vendor@ |
| htmldir = @htmldir@ |
| includedir = @includedir@ |
| infodir = @infodir@ |
| install_sh = @install_sh@ |
| libdir = @libdir@ |
| libexecdir = @libexecdir@ |
| localedir = @localedir@ |
| localstatedir = @localstatedir@ |
| lt_ECHO = @lt_ECHO@ |
| mandir = @mandir@ |
| mkdir_p = @mkdir_p@ |
| oldincludedir = @oldincludedir@ |
| pdfdir = @pdfdir@ |
| pkgpyexecdir = @pkgpyexecdir@ |
| pkgpythondir = @pkgpythondir@ |
| prefix = @prefix@ |
| program_transform_name = @program_transform_name@ |
| psdir = @psdir@ |
| pyexecdir = @pyexecdir@ |
| pythondir = @pythondir@ |
| sbindir = @sbindir@ |
| sharedstatedir = @sharedstatedir@ |
| srcdir = @srcdir@ |
| sysconfdir = @sysconfdir@ |
| target_alias = @target_alias@ |
| top_build_prefix = @top_build_prefix@ |
| top_builddir = @top_builddir@ |
| top_srcdir = @top_srcdir@ |
| |
| # We require automake 1.6 at least. |
| AUTOMAKE_OPTIONS = 1.6 |
| |
| # This is a blank Makefile.am for using gtk-doc. |
| # Copy this to your project's API docs directory and modify the variables to |
| # suit your project. See the GTK+ Makefiles in gtk+/docs/reference for examples |
| # of using the various options. |
| |
| # The name of the module, e.g. 'glib'. |
| # (vips: we put the version in the module name rather than defining |
| # DOC_MODULE_VERSION to avoid some broken links) |
| DOC_MODULE = libvips |
| |
| # Uncomment for versioned docs and specify the version of the module, e.g. '2'. |
| #DOC_MODULE_VERSION=7 |
| |
| # The top-level SGML file. You can change this if you want to. |
| DOC_MAIN_SGML_FILE = $(DOC_MODULE)-docs.sgml |
| |
| # The directory containing the source code. Relative to $(srcdir). |
| # gtk-doc will search all .c & .h files beneath here for inline comments |
| # documenting the functions and macros. |
| # e.g. DOC_SOURCE_DIR=../../../gtk |
| DOC_SOURCE_DIR = $(top_srcdir)/libvips |
| |
| # Extra options to pass to gtkdoc-scangobj. Not normally needed. |
| SCANGOBJ_OPTIONS = |
| |
| # Extra options to supply to gtkdoc-scan. |
| # e.g. SCAN_OPTIONS=--deprecated-guards="GTK_DISABLE_DEPRECATED" |
| SCAN_OPTIONS = --rebuild-types |
| |
| # Extra options to supply to gtkdoc-mkdb. |
| # e.g. MKDB_OPTIONS=--sgml-mode --output-format=xml |
| MKDB_OPTIONS = --sgml-mode --output-format=xml |
| |
| # Extra options to supply to gtkdoc-mktmpl |
| # e.g. MKTMPL_OPTIONS=--only-section-tmpl |
| MKTMPL_OPTIONS = |
| |
| # Extra options to supply to gtkdoc-mkhtml |
| MKHTML_OPTIONS = |
| |
| # Extra options to supply to gtkdoc-fixref. Not normally needed. |
| # e.g. FIXXREF_OPTIONS=--extra-dir=../gdk-pixbuf/html --extra-dir=../gdk/html |
| FIXXREF_OPTIONS = |
| |
| # Used for dependencies. The docs will be rebuilt if any of these change. |
| # e.g. HFILE_GLOB=$(top_srcdir)/gtk/*.h |
| # e.g. CFILE_GLOB=$(top_srcdir)/gtk/*.c |
| HFILE_GLOB = $(top_srcdir)/libvips/include/vips/*.h |
| CFILE_GLOB = $(top_srcdir)/libvips/*/*.c |
| |
| # Extra header to include when scanning, which are not under DOC_SOURCE_DIR |
| # e.g. EXTRA_HFILES=$(top_srcdir}/contrib/extra.h |
| EXTRA_HFILES = |
| |
| # Header files to ignore when scanning. Use base file name, no paths |
| # e.g. IGNORE_HFILES=gtkdebug.h gtkintl.h |
| IGNORE_HFILES = merge.h debug.h internal.h intl.h CImg.h im_video_v4l1.h global_balance.h dbh.h base64.h templates.h mosaic.h deprecated.h thread.h private.h internal.h almostdeprecated.h inlines.h struct.h disp.h |
| |
| # Images to copy into HTML directory. |
| # e.g. HTML_IMAGES=$(top_srcdir)/gtk/stock-icons/stock_about_24.png |
| HTML_IMAGES = \ |
| $(top_srcdir)/doc/reference/images/interconvert.png |
| |
| |
| # Extra SGML files that are included by $(DOC_MAIN_SGML_FILE). |
| # e.g. content_files=running.sgml building.sgml changes-2.0.sgml |
| content_files = |
| |
| # SGML files where gtk-doc abbrevations (#GtkWidget) are expanded |
| # These files must be listed here *and* in content_files |
| # e.g. expand_content_files=running.sgml |
| expand_content_files = |
| |
| # CFLAGS and LDFLAGS for compiling gtkdoc-scangobj with your library. |
| # Only needed if you are using gtkdoc-scangobj to dynamically query widget |
| # signals and properties. |
| # e.g. GTKDOC_CFLAGS=-I$(top_srcdir) -I$(top_builddir) $(GTK_DEBUG_FLAGS) |
| # e.g. GTKDOC_LIBS=$(top_builddir)/gtk/$(gtktargetlib) |
| # (use VIPS_CFLAGS/VIPS_LIBS/VIPS_LIBS so we pick up the glib-object.h that |
| # the scanner uses) |
| GTKDOC_CFLAGS = @VIPS_CFLAGS@ @VIPS_INCLUDES@ |
| GTKDOC_LIBS = @VIPS_CFLAGS@ ${top_builddir}/libvips/libvips.la @VIPS_LIBS@ |
| @GTK_DOC_USE_LIBTOOL_FALSE@GTKDOC_CC = $(CC) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) |
| @GTK_DOC_USE_LIBTOOL_TRUE@GTKDOC_CC = $(LIBTOOL) --mode=compile $(CC) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) |
| @GTK_DOC_USE_LIBTOOL_FALSE@GTKDOC_LD = $(CC) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) |
| @GTK_DOC_USE_LIBTOOL_TRUE@GTKDOC_LD = $(LIBTOOL) --mode=link $(CC) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) |
| @GTK_DOC_USE_LIBTOOL_FALSE@GTKDOC_RUN = sh -c |
| @GTK_DOC_USE_LIBTOOL_TRUE@GTKDOC_RUN = $(LIBTOOL) --mode=execute |
| |
| # We set GPATH here; this gives us semantics for GNU make |
| # which are more like other make's VPATH, when it comes to |
| # whether a source that is a target of one rule is then |
| # searched for in VPATH/GPATH. |
| # |
| GPATH = $(srcdir) |
| TARGET_DIR = $(HTML_DIR)/$(DOC_MODULE) |
| |
| # This includes the standard gtk-doc make rules, copied by gtkdocize. |
| |
| # Other files to distribute |
| # e.g. EXTRA_DIST += version.xml.in |
| EXTRA_DIST = $(content_files) $(HTML_IMAGES) $(DOC_MAIN_SGML_FILE) \ |
| $(DOC_MODULE)-sections.txt $(DOC_MODULE)-overrides.txt images |
| DOC_STAMPS = scan-build.stamp sgml-build.stamp html-build.stamp \ |
| $(srcdir)/sgml.stamp $(srcdir)/html.stamp |
| |
| SCANOBJ_FILES = \ |
| $(DOC_MODULE).args \ |
| $(DOC_MODULE).hierarchy \ |
| $(DOC_MODULE).interfaces \ |
| $(DOC_MODULE).prerequisites \ |
| $(DOC_MODULE).signals |
| |
| REPORT_FILES = \ |
| $(DOC_MODULE)-undocumented.txt \ |
| $(DOC_MODULE)-undeclared.txt \ |
| $(DOC_MODULE)-unused.txt |
| |
| CLEANFILES = $(SCANOBJ_FILES) $(REPORT_FILES) $(DOC_STAMPS) |
| |
| # Files not to distribute |
| # for --rebuild-types in $(SCAN_OPTIONS), e.g. $(DOC_MODULE).types |
| # for --rebuild-sections in $(SCAN_OPTIONS) e.g. $(DOC_MODULE)-sections.txt |
| DISTCLEANFILES = libvips.types |
| |
| # Comment this out if you want your docs-status tested during 'make check' |
| @ENABLE_GTK_DOC_TRUE@TESTS_ENVIRONMENT = cd $(srcsrc) |
| @ENABLE_GTK_DOC_TRUE@TESTS = $(GTKDOC_CHECK) |
| all: all-am |
| |
| .SUFFIXES: |
| $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/gtk-doc.make $(am__configure_deps) |
| @for dep in $?; do \ |
| case '$(am__configure_deps)' in \ |
| *$$dep*) \ |
| ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ |
| && { if test -f $@; then exit 0; else break; fi; }; \ |
| exit 1;; \ |
| esac; \ |
| done; \ |
| echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/reference/Makefile'; \ |
| $(am__cd) $(top_srcdir) && \ |
| $(AUTOMAKE) --gnu doc/reference/Makefile |
| .PRECIOUS: Makefile |
| Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status |
| @case '$?' in \ |
| *config.status*) \ |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ |
| *) \ |
| echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ |
| cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ |
| esac; |
| |
| $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh |
| |
| $(top_srcdir)/configure: $(am__configure_deps) |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh |
| $(ACLOCAL_M4): $(am__aclocal_m4_deps) |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh |
| $(am__aclocal_m4_deps): |
| libvips-docs.sgml: $(top_builddir)/config.status $(srcdir)/libvips-docs.sgml.in |
| cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ |
| |
| mostlyclean-libtool: |
| -rm -f *.lo |
| |
| clean-libtool: |
| -rm -rf .libs _libs |
| tags: TAGS |
| TAGS: |
| |
| ctags: CTAGS |
| CTAGS: |
| |
| |
| check-TESTS: $(TESTS) |
| @failed=0; all=0; xfail=0; xpass=0; skip=0; \ |
| srcdir=$(srcdir); export srcdir; \ |
| list=' $(TESTS) '; \ |
| $(am__tty_colors); \ |
| if test -n "$$list"; then \ |
| for tst in $$list; do \ |
| if test -f ./$$tst; then dir=./; \ |
| elif test -f $$tst; then dir=; \ |
| else dir="$(srcdir)/"; fi; \ |
| if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \ |
| all=`expr $$all + 1`; \ |
| case " $(XFAIL_TESTS) " in \ |
| *[\ \ ]$$tst[\ \ ]*) \ |
| xpass=`expr $$xpass + 1`; \ |
| failed=`expr $$failed + 1`; \ |
| col=$$red; res=XPASS; \ |
| ;; \ |
| *) \ |
| col=$$grn; res=PASS; \ |
| ;; \ |
| esac; \ |
| elif test $$? -ne 77; then \ |
| all=`expr $$all + 1`; \ |
| case " $(XFAIL_TESTS) " in \ |
| *[\ \ ]$$tst[\ \ ]*) \ |
| xfail=`expr $$xfail + 1`; \ |
| col=$$lgn; res=XFAIL; \ |
| ;; \ |
| *) \ |
| failed=`expr $$failed + 1`; \ |
| col=$$red; res=FAIL; \ |
| ;; \ |
| esac; \ |
| else \ |
| skip=`expr $$skip + 1`; \ |
| col=$$blu; res=SKIP; \ |
| fi; \ |
| echo "$${col}$$res$${std}: $$tst"; \ |
| done; \ |
| if test "$$all" -eq 1; then \ |
| tests="test"; \ |
| All=""; \ |
| else \ |
| tests="tests"; \ |
| All="All "; \ |
| fi; \ |
| if test "$$failed" -eq 0; then \ |
| if test "$$xfail" -eq 0; then \ |
| banner="$$All$$all $$tests passed"; \ |
| else \ |
| if test "$$xfail" -eq 1; then failures=failure; else failures=failures; fi; \ |
| banner="$$All$$all $$tests behaved as expected ($$xfail expected $$failures)"; \ |
| fi; \ |
| else \ |
| if test "$$xpass" -eq 0; then \ |
| banner="$$failed of $$all $$tests failed"; \ |
| else \ |
| if test "$$xpass" -eq 1; then passes=pass; else passes=passes; fi; \ |
| banner="$$failed of $$all $$tests did not behave as expected ($$xpass unexpected $$passes)"; \ |
| fi; \ |
| fi; \ |
| dashes="$$banner"; \ |
| skipped=""; \ |
| if test "$$skip" -ne 0; then \ |
| if test "$$skip" -eq 1; then \ |
| skipped="($$skip test was not run)"; \ |
| else \ |
| skipped="($$skip tests were not run)"; \ |
| fi; \ |
| test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \ |
| dashes="$$skipped"; \ |
| fi; \ |
| report=""; \ |
| if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \ |
| report="Please report to $(PACKAGE_BUGREPORT)"; \ |
| test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \ |
| dashes="$$report"; \ |
| fi; \ |
| dashes=`echo "$$dashes" | sed s/./=/g`; \ |
| if test "$$failed" -eq 0; then \ |
| echo "$$grn$$dashes"; \ |
| else \ |
| echo "$$red$$dashes"; \ |
| fi; \ |
| echo "$$banner"; \ |
| test -z "$$skipped" || echo "$$skipped"; \ |
| test -z "$$report" || echo "$$report"; \ |
| echo "$$dashes$$std"; \ |
| test "$$failed" -eq 0; \ |
| else :; fi |
| |
| distdir: $(DISTFILES) |
| @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ |
| topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ |
| list='$(DISTFILES)'; \ |
| dist_files=`for file in $$list; do echo $$file; done | \ |
| sed -e "s|^$$srcdirstrip/||;t" \ |
| -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ |
| case $$dist_files in \ |
| */*) $(MKDIR_P) `echo "$$dist_files" | \ |
| sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ |
| sort -u` ;; \ |
| esac; \ |
| for file in $$dist_files; do \ |
| if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ |
| if test -d $$d/$$file; then \ |
| dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ |
| if test -d "$(distdir)/$$file"; then \ |
| find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ |
| fi; \ |
| if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ |
| cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ |
| find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ |
| fi; \ |
| cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ |
| else \ |
| test -f "$(distdir)/$$file" \ |
| || cp -p $$d/$$file "$(distdir)/$$file" \ |
| || exit 1; \ |
| fi; \ |
| done |
| $(MAKE) $(AM_MAKEFLAGS) \ |
| top_distdir="$(top_distdir)" distdir="$(distdir)" \ |
| dist-hook |
| check-am: all-am |
| $(MAKE) $(AM_MAKEFLAGS) check-TESTS |
| check: check-am |
| all-am: Makefile all-local |
| installdirs: |
| install: install-am |
| install-exec: install-exec-am |
| install-data: install-data-am |
| uninstall: uninstall-am |
| |
| install-am: all-am |
| @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am |
| |
| installcheck: installcheck-am |
| install-strip: |
| $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ |
| install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ |
| `test -z '$(STRIP)' || \ |
| echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install |
| mostlyclean-generic: |
| |
| clean-generic: |
| -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) |
| |
| distclean-generic: |
| -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) |
| -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) |
| -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) |
| |
| maintainer-clean-generic: |
| @echo "This command is intended for maintainers to use" |
| @echo "it deletes files that may require special tools to rebuild." |
| clean: clean-am |
| |
| clean-am: clean-generic clean-libtool clean-local mostlyclean-am |
| |
| distclean: distclean-am |
| -rm -f Makefile |
| distclean-am: clean-am distclean-generic distclean-local |
| |
| dvi: dvi-am |
| |
| dvi-am: |
| |
| html: html-am |
| |
| html-am: |
| |
| info: info-am |
| |
| info-am: |
| |
| install-data-am: install-data-local |
| |
| install-dvi: install-dvi-am |
| |
| install-dvi-am: |
| |
| install-exec-am: |
| |
| install-html: install-html-am |
| |
| install-html-am: |
| |
| install-info: install-info-am |
| |
| install-info-am: |
| |
| install-man: |
| |
| install-pdf: install-pdf-am |
| |
| install-pdf-am: |
| |
| install-ps: install-ps-am |
| |
| install-ps-am: |
| |
| installcheck-am: |
| |
| maintainer-clean: maintainer-clean-am |
| -rm -f Makefile |
| maintainer-clean-am: distclean-am maintainer-clean-generic \ |
| maintainer-clean-local |
| |
| mostlyclean: mostlyclean-am |
| |
| mostlyclean-am: mostlyclean-generic mostlyclean-libtool |
| |
| pdf: pdf-am |
| |
| pdf-am: |
| |
| ps: ps-am |
| |
| ps-am: |
| |
| uninstall-am: uninstall-local |
| |
| .MAKE: check-am install-am install-strip |
| |
| .PHONY: all all-am all-local check check-TESTS check-am clean \ |
| clean-generic clean-libtool clean-local dist-hook distclean \ |
| distclean-generic distclean-libtool distclean-local distdir \ |
| dvi dvi-am html html-am info info-am install install-am \ |
| install-data install-data-am install-data-local install-dvi \ |
| install-dvi-am install-exec install-exec-am install-html \ |
| install-html-am install-info install-info-am install-man \ |
| install-pdf install-pdf-am install-ps install-ps-am \ |
| install-strip installcheck installcheck-am installdirs \ |
| maintainer-clean maintainer-clean-generic \ |
| maintainer-clean-local mostlyclean mostlyclean-generic \ |
| mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \ |
| uninstall-local |
| |
| |
| @ENABLE_GTK_DOC_TRUE@all-local: html-build.stamp |
| @ENABLE_GTK_DOC_FALSE@all-local: |
| |
| docs: html-build.stamp |
| |
| $(REPORT_FILES): sgml-build.stamp |
| |
| #### scan #### |
| |
| scan-build.stamp: $(HFILE_GLOB) $(CFILE_GLOB) |
| @echo 'gtk-doc: Scanning header files' |
| @-chmod -R u+w $(srcdir) |
| cd $(srcdir) && \ |
| gtkdoc-scan --module=$(DOC_MODULE) --source-dir=$(DOC_SOURCE_DIR) --ignore-headers="$(IGNORE_HFILES)" $(SCAN_OPTIONS) $(EXTRA_HFILES) |
| if grep -l '^..*$$' $(srcdir)/$(DOC_MODULE).types > /dev/null 2>&1 ; then \ |
| CC="$(GTKDOC_CC)" LD="$(GTKDOC_LD)" RUN="$(GTKDOC_RUN)" CFLAGS="$(GTKDOC_CFLAGS) $(CFLAGS)" LDFLAGS="$(GTKDOC_LIBS) $(LDFLAGS)" gtkdoc-scangobj $(SCANGOBJ_OPTIONS) --module=$(DOC_MODULE) --output-dir=$(srcdir) ; \ |
| else \ |
| cd $(srcdir) ; \ |
| for i in $(SCANOBJ_FILES) ; do \ |
| test -f $$i || touch $$i ; \ |
| done \ |
| fi |
| touch scan-build.stamp |
| |
| $(DOC_MODULE)-decl.txt $(SCANOBJ_FILES) $(DOC_MODULE)-sections.txt $(DOC_MODULE)-overrides.txt: scan-build.stamp |
| @true |
| |
| #### xml #### |
| |
| sgml-build.stamp: $(DOC_MODULE)-decl.txt $(SCANOBJ_FILES) $(DOC_MODULE)-sections.txt $(DOC_MODULE)-overrides.txt $(expand_content_files) |
| @echo 'gtk-doc: Building XML' |
| @-chmod -R u+w $(srcdir) |
| cd $(srcdir) && \ |
| gtkdoc-mkdb --module=$(DOC_MODULE) --source-dir=$(DOC_SOURCE_DIR) --output-format=xml --expand-content-files="$(expand_content_files)" --main-sgml-file=$(DOC_MAIN_SGML_FILE) $(MKDB_OPTIONS) |
| touch sgml-build.stamp |
| |
| sgml.stamp: sgml-build.stamp |
| @true |
| |
| #### html #### |
| |
| html-build.stamp: sgml.stamp $(DOC_MAIN_SGML_FILE) $(content_files) |
| @echo 'gtk-doc: Building HTML' |
| @-chmod -R u+w $(srcdir) |
| rm -rf $(srcdir)/html |
| mkdir $(srcdir)/html |
| mkhtml_options=""; \ |
| gtkdoc-mkhtml 2>&1 --help | grep >/dev/null "\-\-path"; \ |
| if test "$(?)" = "0"; then \ |
| mkhtml_options=--path="$(srcdir)"; \ |
| fi |
| cd $(srcdir)/html && gtkdoc-mkhtml $(mkhtml_options) $(MKHTML_OPTIONS) $(DOC_MODULE) ../$(DOC_MAIN_SGML_FILE) |
| test "x$(HTML_IMAGES)" = "x" || ( cd $(srcdir) && cp $(HTML_IMAGES) html ) |
| @echo 'gtk-doc: Fixing cross-references' |
| cd $(srcdir) && gtkdoc-fixxref --module-dir=html --html-dir=$(HTML_DIR) $(FIXXREF_OPTIONS) |
| touch html-build.stamp |
| |
| ############## |
| |
| clean-local: |
| rm -f *~ *.bak |
| rm -rf .libs |
| |
| distclean-local: |
| cd $(srcdir) && \ |
| rm -rf xml $(REPORT_FILES) \ |
| $(DOC_MODULE)-decl-list.txt $(DOC_MODULE)-decl.txt |
| |
| maintainer-clean-local: clean |
| cd $(srcdir) && rm -rf html |
| |
| install-data-local: |
| installfiles=`echo $(srcdir)/html/*`; \ |
| if test "$$installfiles" = '$(srcdir)/html/*'; \ |
| then echo '-- Nothing to install' ; \ |
| else \ |
| if test -n "$(DOC_MODULE_VERSION)"; then \ |
| installdir="$(DESTDIR)$(TARGET_DIR)-$(DOC_MODULE_VERSION)"; \ |
| else \ |
| installdir="$(DESTDIR)$(TARGET_DIR)"; \ |
| fi; \ |
| $(mkinstalldirs) $${installdir} ; \ |
| for i in $$installfiles; do \ |
| echo '-- Installing '$$i ; \ |
| $(INSTALL_DATA) $$i $${installdir}; \ |
| done; \ |
| if test -n "$(DOC_MODULE_VERSION)"; then \ |
| mv -f $${installdir}/$(DOC_MODULE).devhelp2 \ |
| $${installdir}/$(DOC_MODULE)-$(DOC_MODULE_VERSION).devhelp2; \ |
| mv -f $${installdir}/$(DOC_MODULE).devhelp \ |
| $${installdir}/$(DOC_MODULE)-$(DOC_MODULE_VERSION).devhelp; \ |
| fi; \ |
| ! which gtkdoc-rebase >/dev/null 2>&1 || \ |
| gtkdoc-rebase --relative --dest-dir=$(DESTDIR) --html-dir=$${installdir} ; \ |
| fi |
| |
| uninstall-local: |
| if test -n "$(DOC_MODULE_VERSION)"; then \ |
| installdir="$(DESTDIR)$(TARGET_DIR)-$(DOC_MODULE_VERSION)"; \ |
| else \ |
| installdir="$(DESTDIR)$(TARGET_DIR)"; \ |
| fi; \ |
| rm -rf $${installdir} |
| |
| # |
| # Require gtk-doc when making dist |
| # |
| @ENABLE_GTK_DOC_TRUE@dist-check-gtkdoc: |
| @ENABLE_GTK_DOC_FALSE@dist-check-gtkdoc: |
| @ENABLE_GTK_DOC_FALSE@ @echo "*** gtk-doc must be installed and enabled in order to make dist" |
| @ENABLE_GTK_DOC_FALSE@ @false |
| |
| dist-hook: dist-check-gtkdoc dist-hook-local |
| mkdir $(distdir)/html |
| cp $(srcdir)/html/* $(distdir)/html |
| -cp $(srcdir)/$(DOC_MODULE).types $(distdir)/ |
| -cp $(srcdir)/$(DOC_MODULE)-sections.txt $(distdir)/ |
| cd $(distdir) && rm -f $(DISTCLEANFILES) |
| ! which gtkdoc-rebase >/dev/null 2>&1 || \ |
| gtkdoc-rebase --online --relative --html-dir=$(distdir)/html |
| |
| .PHONY : dist-hook-local docs |
| |
| # Tell versions [3.59,3.63) of GNU make to not export all variables. |
| # Otherwise a system limit (for SysV at least) may be exceeded. |
| .NOEXPORT: |
