# Makefile.in generated by automake 1.11.1 from Makefile.am.
# @configure_input@

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

# -*- mode: makefile -*-

####################################
# Everything below here is generic #
####################################
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
	$(srcdir)/libvips-docs.sgml.in $(top_srcdir)/gtk-doc.make
subdir = doc/reference
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
	$(top_srcdir)/configure.in
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES = libvips-docs.sgml
CONFIG_CLEAN_VPATH_FILES =
SOURCES =
DIST_SOURCES =
am__tty_colors = \
red=; grn=; lgn=; blu=; std=
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AR = @AR@
AS = @AS@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CATALOGS = @CATALOGS@
CATOBJEXT = @CATOBJEXT@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CXX = @CXX@
CXXCPP = @CXXCPP@
CXXDEPMODE = @CXXDEPMODE@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DATADIRNAME = @DATADIRNAME@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DLLTOOL = @DLLTOOL@
DLLWRAP = @DLLWRAP@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
EXIF_CFLAGS = @EXIF_CFLAGS@
EXIF_LIBS = @EXIF_LIBS@
FFTW3_CFLAGS = @FFTW3_CFLAGS@
FFTW3_LIBS = @FFTW3_LIBS@
FGREP = @FGREP@
GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
GMOFILES = @GMOFILES@
GMSGFMT = @GMSGFMT@
GREP = @GREP@
GTHREAD_CFLAGS = @GTHREAD_CFLAGS@
GTHREAD_LIBS = @GTHREAD_LIBS@
GTKDOC_CHECK = @GTKDOC_CHECK@
GTKDOC_MKPDF = @GTKDOC_MKPDF@
GTKDOC_REBASE = @GTKDOC_REBASE@
HTML_DIR = @HTML_DIR@
IMAGE_MAGICK_CFLAGS = @IMAGE_MAGICK_CFLAGS@
IMAGE_MAGICK_LIBS = @IMAGE_MAGICK_LIBS@
IM_LIBDIR = @IM_LIBDIR@
IM_MAJOR_VERSION = @IM_MAJOR_VERSION@
IM_MICRO_VERSION = @IM_MICRO_VERSION@
IM_MINOR_VERSION = @IM_MINOR_VERSION@
IM_VERSION = @IM_VERSION@
IM_VERSION_STRING = @IM_VERSION_STRING@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INSTOBJEXT = @INSTOBJEXT@
INTLLIBS = @INTLLIBS@
JPEG_INCLUDES = @JPEG_INCLUDES@
JPEG_LIBS = @JPEG_LIBS@
LCMS_CFLAGS = @LCMS_CFLAGS@
LCMS_LIBS = @LCMS_LIBS@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBOBJS = @LIBOBJS@
LIBOIL_CFLAGS = @LIBOIL_CFLAGS@
LIBOIL_LIBS = @LIBOIL_LIBS@
LIBRARY_AGE = @LIBRARY_AGE@
LIBRARY_CURRENT = @LIBRARY_CURRENT@
LIBRARY_REVISION = @LIBRARY_REVISION@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAGICK_CFLAGS = @MAGICK_CFLAGS@
MAGICK_LIBS = @MAGICK_LIBS@
MAGICK_WAND_CFLAGS = @MAGICK_WAND_CFLAGS@
MAGICK_WAND_LIBS = @MAGICK_WAND_LIBS@
MAKEINFO = @MAKEINFO@
MATIO_CFLAGS = @MATIO_CFLAGS@
MATIO_LIBS = @MATIO_LIBS@
MKDIR_P = @MKDIR_P@
MKINSTALLDIRS = @MKINSTALLDIRS@
MSGFMT = @MSGFMT@
MSGFMT_OPTS = @MSGFMT_OPTS@
NM = @NM@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OPENEXR_CFLAGS = @OPENEXR_CFLAGS@
OPENEXR_LIBS = @OPENEXR_LIBS@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGES_USED = @PACKAGES_USED@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PANGOFT2_CFLAGS = @PANGOFT2_CFLAGS@
PANGOFT2_LIBS = @PANGOFT2_LIBS@
PATH_SEPARATOR = @PATH_SEPARATOR@
PKG_CONFIG = @PKG_CONFIG@
PNG_CFLAGS = @PNG_CFLAGS@
PNG_INCLUDES = @PNG_INCLUDES@
PNG_LIBS = @PNG_LIBS@
POFILES = @POFILES@
POSUB = @POSUB@
PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@
PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@
PYTHON = @PYTHON@
PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@
PYTHON_INCLUDES = @PYTHON_INCLUDES@
PYTHON_PLATFORM = @PYTHON_PLATFORM@
PYTHON_PREFIX = @PYTHON_PREFIX@
PYTHON_VERSION = @PYTHON_VERSION@
RANLIB = @RANLIB@
REQUIRED_CFLAGS = @REQUIRED_CFLAGS@
REQUIRED_LIBS = @REQUIRED_LIBS@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
TIFF_INCLUDES = @TIFF_INCLUDES@
TIFF_LIBS = @TIFF_LIBS@
USE_NLS = @USE_NLS@
VERSION = @VERSION@
VIPS_CFLAGS = @VIPS_CFLAGS@
VIPS_CXX_LIBS = @VIPS_CXX_LIBS@
VIPS_INCLUDES = @VIPS_INCLUDES@
VIPS_LIBS = @VIPS_LIBS@
XGETTEXT = @XGETTEXT@
XMKMF = @XMKMF@
X_CFLAGS = @X_CFLAGS@
X_EXTRA_LIBS = @X_EXTRA_LIBS@
X_LIBS = @X_LIBS@
X_PRE_LIBS = @X_PRE_LIBS@
ZIP_INCLUDES = @ZIP_INCLUDES@
ZIP_LIBS = @ZIP_LIBS@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
lt_ECHO = @lt_ECHO@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
pkgpyexecdir = @pkgpyexecdir@
pkgpythondir = @pkgpythondir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
pyexecdir = @pyexecdir@
pythondir = @pythondir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@

# We require automake 1.6 at least.
AUTOMAKE_OPTIONS = 1.6

# This is a blank Makefile.am for using gtk-doc.
# Copy this to your project's API docs directory and modify the variables to
# suit your project. See the GTK+ Makefiles in gtk+/docs/reference for examples
# of using the various options.

# The name of the module, e.g. 'glib'.
# (vips: we put the version in the module name rather than defining
# DOC_MODULE_VERSION to avoid some broken links)
DOC_MODULE = libvips

# Uncomment for versioned docs and specify the version of the module, e.g. '2'.
#DOC_MODULE_VERSION=7

# The top-level SGML file. You can change this if you want to.
DOC_MAIN_SGML_FILE = $(DOC_MODULE)-docs.sgml

# The directory containing the source code. Relative to $(srcdir).
# gtk-doc will search all .c & .h files beneath here for inline comments
# documenting the functions and macros.
# e.g. DOC_SOURCE_DIR=../../../gtk
DOC_SOURCE_DIR = $(top_srcdir)/libvips

# Extra options to pass to gtkdoc-scangobj. Not normally needed.
SCANGOBJ_OPTIONS = 

# Extra options to supply to gtkdoc-scan.
# e.g. SCAN_OPTIONS=--deprecated-guards="GTK_DISABLE_DEPRECATED"
SCAN_OPTIONS = --rebuild-types

# Extra options to supply to gtkdoc-mkdb.
# e.g. MKDB_OPTIONS=--sgml-mode --output-format=xml
MKDB_OPTIONS = --sgml-mode --output-format=xml

# Extra options to supply to gtkdoc-mktmpl
# e.g. MKTMPL_OPTIONS=--only-section-tmpl
MKTMPL_OPTIONS = 

# Extra options to supply to gtkdoc-mkhtml
MKHTML_OPTIONS = 

# Extra options to supply to gtkdoc-fixref. Not normally needed.
# e.g. FIXXREF_OPTIONS=--extra-dir=../gdk-pixbuf/html --extra-dir=../gdk/html
FIXXREF_OPTIONS = 

# Used for dependencies. The docs will be rebuilt if any of these change.
# e.g. HFILE_GLOB=$(top_srcdir)/gtk/*.h
# e.g. CFILE_GLOB=$(top_srcdir)/gtk/*.c
HFILE_GLOB = $(top_srcdir)/libvips/include/vips/*.h
CFILE_GLOB = $(top_srcdir)/libvips/*/*.c

# Extra header to include when scanning, which are not under DOC_SOURCE_DIR
# e.g. EXTRA_HFILES=$(top_srcdir}/contrib/extra.h
EXTRA_HFILES = 

# Header files to ignore when scanning. Use base file name, no paths
# e.g. IGNORE_HFILES=gtkdebug.h gtkintl.h
IGNORE_HFILES = merge.h debug.h internal.h intl.h CImg.h im_video_v4l1.h global_balance.h dbh.h base64.h templates.h mosaic.h deprecated.h thread.h private.h internal.h almostdeprecated.h inlines.h struct.h disp.h

# Images to copy into HTML directory.
# e.g. HTML_IMAGES=$(top_srcdir)/gtk/stock-icons/stock_about_24.png
HTML_IMAGES = \
	$(top_srcdir)/doc/reference/images/interconvert.png


# Extra SGML files that are included by $(DOC_MAIN_SGML_FILE).
# e.g. content_files=running.sgml building.sgml changes-2.0.sgml
content_files = 

# SGML files where gtk-doc abbrevations (#GtkWidget) are expanded
# These files must be listed here *and* in content_files
# e.g. expand_content_files=running.sgml
expand_content_files = 

# CFLAGS and LDFLAGS for compiling gtkdoc-scangobj with your library.
# Only needed if you are using gtkdoc-scangobj to dynamically query widget
# signals and properties.
# e.g. GTKDOC_CFLAGS=-I$(top_srcdir) -I$(top_builddir) $(GTK_DEBUG_FLAGS)
# e.g. GTKDOC_LIBS=$(top_builddir)/gtk/$(gtktargetlib)
# (use VIPS_CFLAGS/VIPS_LIBS/VIPS_LIBS so we pick up the glib-object.h that
# the scanner uses)
GTKDOC_CFLAGS = @VIPS_CFLAGS@ @VIPS_INCLUDES@ 
GTKDOC_LIBS = @VIPS_CFLAGS@ ${top_builddir}/libvips/libvips.la @VIPS_LIBS@
@GTK_DOC_USE_LIBTOOL_FALSE@GTKDOC_CC = $(CC) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
@GTK_DOC_USE_LIBTOOL_TRUE@GTKDOC_CC = $(LIBTOOL) --mode=compile $(CC) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
@GTK_DOC_USE_LIBTOOL_FALSE@GTKDOC_LD = $(CC) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS)
@GTK_DOC_USE_LIBTOOL_TRUE@GTKDOC_LD = $(LIBTOOL) --mode=link $(CC) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS)
@GTK_DOC_USE_LIBTOOL_FALSE@GTKDOC_RUN = sh -c
@GTK_DOC_USE_LIBTOOL_TRUE@GTKDOC_RUN = $(LIBTOOL) --mode=execute

# We set GPATH here; this gives us semantics for GNU make
# which are more like other make's VPATH, when it comes to
# whether a source that is a target of one rule is then
# searched for in VPATH/GPATH.
#
GPATH = $(srcdir)
TARGET_DIR = $(HTML_DIR)/$(DOC_MODULE)

# This includes the standard gtk-doc make rules, copied by gtkdocize.

# Other files to distribute
# e.g. EXTRA_DIST += version.xml.in
EXTRA_DIST = $(content_files) $(HTML_IMAGES) $(DOC_MAIN_SGML_FILE) \
	$(DOC_MODULE)-sections.txt $(DOC_MODULE)-overrides.txt images
DOC_STAMPS = scan-build.stamp sgml-build.stamp html-build.stamp \
	   $(srcdir)/sgml.stamp $(srcdir)/html.stamp

SCANOBJ_FILES = \
	$(DOC_MODULE).args 	 \
	$(DOC_MODULE).hierarchy  \
	$(DOC_MODULE).interfaces \
	$(DOC_MODULE).prerequisites \
	$(DOC_MODULE).signals

REPORT_FILES = \
	$(DOC_MODULE)-undocumented.txt \
	$(DOC_MODULE)-undeclared.txt \
	$(DOC_MODULE)-unused.txt

CLEANFILES = $(SCANOBJ_FILES) $(REPORT_FILES) $(DOC_STAMPS)

# Files not to distribute
# for --rebuild-types in $(SCAN_OPTIONS), e.g. $(DOC_MODULE).types
# for --rebuild-sections in $(SCAN_OPTIONS) e.g. $(DOC_MODULE)-sections.txt
DISTCLEANFILES = libvips.types

# Comment this out if you want your docs-status tested during 'make check'
@ENABLE_GTK_DOC_TRUE@TESTS_ENVIRONMENT = cd $(srcsrc)
@ENABLE_GTK_DOC_TRUE@TESTS = $(GTKDOC_CHECK)
all: all-am

.SUFFIXES:
$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am $(top_srcdir)/gtk-doc.make $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
	        && { if test -f $@; then exit 0; else break; fi; }; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/reference/Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --gnu doc/reference/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure:  $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
libvips-docs.sgml: $(top_builddir)/config.status $(srcdir)/libvips-docs.sgml.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs
tags: TAGS
TAGS:

ctags: CTAGS
CTAGS:


check-TESTS: $(TESTS)
	@failed=0; all=0; xfail=0; xpass=0; skip=0; \
	srcdir=$(srcdir); export srcdir; \
	list=' $(TESTS) '; \
	$(am__tty_colors); \
	if test -n "$$list"; then \
	  for tst in $$list; do \
	    if test -f ./$$tst; then dir=./; \
	    elif test -f $$tst; then dir=; \
	    else dir="$(srcdir)/"; fi; \
	    if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
	      all=`expr $$all + 1`; \
	      case " $(XFAIL_TESTS) " in \
	      *[\ \	]$$tst[\ \	]*) \
		xpass=`expr $$xpass + 1`; \
		failed=`expr $$failed + 1`; \
		col=$$red; res=XPASS; \
	      ;; \
	      *) \
		col=$$grn; res=PASS; \
	      ;; \
	      esac; \
	    elif test $$? -ne 77; then \
	      all=`expr $$all + 1`; \
	      case " $(XFAIL_TESTS) " in \
	      *[\ \	]$$tst[\ \	]*) \
		xfail=`expr $$xfail + 1`; \
		col=$$lgn; res=XFAIL; \
	      ;; \
	      *) \
		failed=`expr $$failed + 1`; \
		col=$$red; res=FAIL; \
	      ;; \
	      esac; \
	    else \
	      skip=`expr $$skip + 1`; \
	      col=$$blu; res=SKIP; \
	    fi; \
	    echo "$${col}$$res$${std}: $$tst"; \
	  done; \
	  if test "$$all" -eq 1; then \
	    tests="test"; \
	    All=""; \
	  else \
	    tests="tests"; \
	    All="All "; \
	  fi; \
	  if test "$$failed" -eq 0; then \
	    if test "$$xfail" -eq 0; then \
	      banner="$$All$$all $$tests passed"; \
	    else \
	      if test "$$xfail" -eq 1; then failures=failure; else failures=failures; fi; \
	      banner="$$All$$all $$tests behaved as expected ($$xfail expected $$failures)"; \
	    fi; \
	  else \
	    if test "$$xpass" -eq 0; then \
	      banner="$$failed of $$all $$tests failed"; \
	    else \
	      if test "$$xpass" -eq 1; then passes=pass; else passes=passes; fi; \
	      banner="$$failed of $$all $$tests did not behave as expected ($$xpass unexpected $$passes)"; \
	    fi; \
	  fi; \
	  dashes="$$banner"; \
	  skipped=""; \
	  if test "$$skip" -ne 0; then \
	    if test "$$skip" -eq 1; then \
	      skipped="($$skip test was not run)"; \
	    else \
	      skipped="($$skip tests were not run)"; \
	    fi; \
	    test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
	      dashes="$$skipped"; \
	  fi; \
	  report=""; \
	  if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
	    report="Please report to $(PACKAGE_BUGREPORT)"; \
	    test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
	      dashes="$$report"; \
	  fi; \
	  dashes=`echo "$$dashes" | sed s/./=/g`; \
	  if test "$$failed" -eq 0; then \
	    echo "$$grn$$dashes"; \
	  else \
	    echo "$$red$$dashes"; \
	  fi; \
	  echo "$$banner"; \
	  test -z "$$skipped" || echo "$$skipped"; \
	  test -z "$$report" || echo "$$report"; \
	  echo "$$dashes$$std"; \
	  test "$$failed" -eq 0; \
	else :; fi

distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) \
	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
	  dist-hook
check-am: all-am
	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
check: check-am
all-am: Makefile all-local
installdirs:
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-am

clean-am: clean-generic clean-libtool clean-local mostlyclean-am

distclean: distclean-am
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-local

dvi: dvi-am

dvi-am:

html: html-am

html-am:

info: info-am

info-am:

install-data-am: install-data-local

install-dvi: install-dvi-am

install-dvi-am:

install-exec-am:

install-html: install-html-am

install-html-am:

install-info: install-info-am

install-info-am:

install-man:

install-pdf: install-pdf-am

install-pdf-am:

install-ps: install-ps-am

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic \
	maintainer-clean-local

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-am

pdf-am:

ps: ps-am

ps-am:

uninstall-am: uninstall-local

.MAKE: check-am install-am install-strip

.PHONY: all all-am all-local check check-TESTS check-am clean \
	clean-generic clean-libtool clean-local dist-hook distclean \
	distclean-generic distclean-libtool distclean-local distdir \
	dvi dvi-am html html-am info info-am install install-am \
	install-data install-data-am install-data-local install-dvi \
	install-dvi-am install-exec install-exec-am install-html \
	install-html-am install-info install-info-am install-man \
	install-pdf install-pdf-am install-ps install-ps-am \
	install-strip installcheck installcheck-am installdirs \
	maintainer-clean maintainer-clean-generic \
	maintainer-clean-local mostlyclean mostlyclean-generic \
	mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \
	uninstall-local


@ENABLE_GTK_DOC_TRUE@all-local: html-build.stamp
@ENABLE_GTK_DOC_FALSE@all-local:

docs: html-build.stamp

$(REPORT_FILES): sgml-build.stamp

#### scan ####

scan-build.stamp: $(HFILE_GLOB) $(CFILE_GLOB)
	@echo 'gtk-doc: Scanning header files'
	@-chmod -R u+w $(srcdir)
	cd $(srcdir) && \
	  gtkdoc-scan --module=$(DOC_MODULE) --source-dir=$(DOC_SOURCE_DIR) --ignore-headers="$(IGNORE_HFILES)" $(SCAN_OPTIONS) $(EXTRA_HFILES)
	if grep -l '^..*$$' $(srcdir)/$(DOC_MODULE).types > /dev/null 2>&1 ; then \
	    CC="$(GTKDOC_CC)" LD="$(GTKDOC_LD)" RUN="$(GTKDOC_RUN)" CFLAGS="$(GTKDOC_CFLAGS) $(CFLAGS)" LDFLAGS="$(GTKDOC_LIBS) $(LDFLAGS)" gtkdoc-scangobj $(SCANGOBJ_OPTIONS) --module=$(DOC_MODULE) --output-dir=$(srcdir) ; \
	else \
	    cd $(srcdir) ; \
	    for i in $(SCANOBJ_FILES) ; do \
               test -f $$i || touch $$i ; \
	    done \
	fi
	touch scan-build.stamp

$(DOC_MODULE)-decl.txt $(SCANOBJ_FILES) $(DOC_MODULE)-sections.txt $(DOC_MODULE)-overrides.txt: scan-build.stamp
	@true

#### xml ####

sgml-build.stamp: $(DOC_MODULE)-decl.txt $(SCANOBJ_FILES) $(DOC_MODULE)-sections.txt $(DOC_MODULE)-overrides.txt $(expand_content_files)
	@echo 'gtk-doc: Building XML'
	@-chmod -R u+w $(srcdir)
	cd $(srcdir) && \
	gtkdoc-mkdb --module=$(DOC_MODULE) --source-dir=$(DOC_SOURCE_DIR) --output-format=xml --expand-content-files="$(expand_content_files)" --main-sgml-file=$(DOC_MAIN_SGML_FILE) $(MKDB_OPTIONS)
	touch sgml-build.stamp

sgml.stamp: sgml-build.stamp
	@true

#### html ####

html-build.stamp: sgml.stamp $(DOC_MAIN_SGML_FILE) $(content_files)
	@echo 'gtk-doc: Building HTML'
	@-chmod -R u+w $(srcdir)
	rm -rf $(srcdir)/html
	mkdir $(srcdir)/html
	mkhtml_options=""; \
	gtkdoc-mkhtml 2>&1 --help | grep  >/dev/null "\-\-path"; \
	if test "$(?)" = "0"; then \
	  mkhtml_options=--path="$(srcdir)"; \
	fi
	cd $(srcdir)/html && gtkdoc-mkhtml $(mkhtml_options) $(MKHTML_OPTIONS) $(DOC_MODULE) ../$(DOC_MAIN_SGML_FILE)
	test "x$(HTML_IMAGES)" = "x" || ( cd $(srcdir) && cp $(HTML_IMAGES) html )
	@echo 'gtk-doc: Fixing cross-references'
	cd $(srcdir) && gtkdoc-fixxref --module-dir=html --html-dir=$(HTML_DIR) $(FIXXREF_OPTIONS)
	touch html-build.stamp

##############

clean-local:
	rm -f *~ *.bak
	rm -rf .libs

distclean-local:
	cd $(srcdir) && \
	  rm -rf xml $(REPORT_FILES) \
	         $(DOC_MODULE)-decl-list.txt $(DOC_MODULE)-decl.txt

maintainer-clean-local: clean
	cd $(srcdir) && rm -rf html

install-data-local:
	installfiles=`echo $(srcdir)/html/*`; \
	if test "$$installfiles" = '$(srcdir)/html/*'; \
	then echo '-- Nothing to install' ; \
	else \
	  if test -n "$(DOC_MODULE_VERSION)"; then \
	    installdir="$(DESTDIR)$(TARGET_DIR)-$(DOC_MODULE_VERSION)"; \
	  else \
	    installdir="$(DESTDIR)$(TARGET_DIR)"; \
	  fi; \
	  $(mkinstalldirs) $${installdir} ; \
	  for i in $$installfiles; do \
	    echo '-- Installing '$$i ; \
	    $(INSTALL_DATA) $$i $${installdir}; \
	  done; \
	  if test -n "$(DOC_MODULE_VERSION)"; then \
	    mv -f $${installdir}/$(DOC_MODULE).devhelp2 \
	      $${installdir}/$(DOC_MODULE)-$(DOC_MODULE_VERSION).devhelp2; \
	    mv -f $${installdir}/$(DOC_MODULE).devhelp \
	      $${installdir}/$(DOC_MODULE)-$(DOC_MODULE_VERSION).devhelp; \
	  fi; \
	  ! which gtkdoc-rebase >/dev/null 2>&1 || \
	    gtkdoc-rebase --relative --dest-dir=$(DESTDIR) --html-dir=$${installdir} ; \
	fi

uninstall-local:
	if test -n "$(DOC_MODULE_VERSION)"; then \
	  installdir="$(DESTDIR)$(TARGET_DIR)-$(DOC_MODULE_VERSION)"; \
	else \
	  installdir="$(DESTDIR)$(TARGET_DIR)"; \
	fi; \
	rm -rf $${installdir}

#
# Require gtk-doc when making dist
#
@ENABLE_GTK_DOC_TRUE@dist-check-gtkdoc:
@ENABLE_GTK_DOC_FALSE@dist-check-gtkdoc:
@ENABLE_GTK_DOC_FALSE@	@echo "*** gtk-doc must be installed and enabled in order to make dist"
@ENABLE_GTK_DOC_FALSE@	@false

dist-hook: dist-check-gtkdoc dist-hook-local
	mkdir $(distdir)/html
	cp $(srcdir)/html/* $(distdir)/html
	-cp $(srcdir)/$(DOC_MODULE).types $(distdir)/
	-cp $(srcdir)/$(DOC_MODULE)-sections.txt $(distdir)/
	cd $(distdir) && rm -f $(DISTCLEANFILES)
	! which gtkdoc-rebase >/dev/null 2>&1 || \
	  gtkdoc-rebase --online --relative --html-dir=$(distdir)/html

.PHONY : dist-hook-local docs

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: