<!-- ##### SECTION Title ##### -->
Perl-compatible regular expressions

<!-- ##### SECTION Short_Description ##### -->
matches strings against regular expressions

<!-- ##### SECTION Long_Description ##### -->
<para>
The <function>g_regex_*()</function> functions implement regular
expression pattern matching using syntax and semantics similar to
Perl regular expression.
</para>
<para>
Some functions accept a <parameter>start_position</parameter> argument,
setting it differs from just passing over a shortened string and setting
#G_REGEX_MATCH_NOTBOL in the case of a pattern that begins with any kind
of lookbehind assertion.
For example, consider the pattern "\Biss\B" which finds occurrences of "iss"
in the middle of words. ("\B" matches only if the current position in the
subject is not a word boundary.) When applied to the string "Mississipi"
from the fourth byte, namely "issipi", it does not match, because "\B" is
always false at the start of the subject, which is deemed to be a word
boundary. However, if the entire string is passed , but with
<parameter>start_position</parameter> set to 4, it finds the second
occurrence of "iss" because it is able to look behind the starting point
to discover that it is preceded by a letter.
</para>
<para>
Note that, unless you set the #G_REGEX_RAW flag, all the strings passed
to these functions must be encoded in UTF-8. The lengths and the positions
inside the strings are in bytes and not in characters, so, for instance,
"\xc3\xa0" (i.e. "&agrave;") is two bytes long but it is treated as a single
character. If you set #G_REGEX_RAW the strings can be non-valid UTF-8
strings and a byte is treated as a character, so "\xc3\xa0" is two bytes
and two characters long.
</para>
<para>
When matching a pattern, "\n" matches only against a "\n" character in the
string, and "\r" matches only a "\r" character. To match any newline sequence
use "\R". This particular group matches either the two-character sequence
CR + LF ("\r\n"), or one of the single characters LF (linefeed, U+000A, "\n"), VT
(vertical tab, U+000B, "\v"), FF (formfeed, U+000C, "\f"), CR (carriage return,
U+000D, "\r"), NEL (next line, U+0085), LS (line separator, U+2028), or PS
(paragraph separator, U+2029).
</para>
<para>
The behaviour of the dot, circumflex, and dollar metacharacters are affected by
newline characters, the default is to recognize any newline character (the same
characters recognized by "\R"). This can be changed with #G_REGEX_NEWLINE_CR,
#G_REGEX_NEWLINE_LF and #G_REGEX_NEWLINE_CRLF compile options,
and with #G_REGEX_MATCH_NEWLINE_ANY, #G_REGEX_MATCH_NEWLINE_CR,
#G_REGEX_MATCH_NEWLINE_LF and #G_REGEX_MATCH_NEWLINE_CRLF match options.
These settings are also relevant when compiling a pattern if
#G_REGEX_EXTENDED is set, and an unescaped "#" outside a character class is
encountered. This indicates a comment that lasts until after the next
newline.
</para>
<para>
Creating and manipulating the same #GRegex structure from different
threads is not a problem as #GRegex does not modify its internal
state between creation and destruction, on the other hand #GMatchInfo is
not threadsafe.
</para>
<para>
The regular expressions low level functionalities are obtained through
the excellent <ulink url="http://www.pcre.org/">PCRE</ulink> library
written by Philip Hazel.
</para>

<!-- ##### SECTION See_Also ##### -->
<para>

</para>

<!-- ##### SECTION Stability_Level ##### -->


<!-- ##### SECTION Image ##### -->


<!-- ##### ENUM GRegexError ##### -->
<para>
Error codes returned by regular expressions functions.
</para>

@G_REGEX_ERROR_COMPILE: Compilation of the regular expression failed.
@G_REGEX_ERROR_OPTIMIZE: Optimization of the regular expression failed.
@G_REGEX_ERROR_REPLACE: Replacement failed due to an ill-formed replacement string.
@G_REGEX_ERROR_MATCH: The match process failed.
@G_REGEX_ERROR_INTERNAL: Internal error of the regular expression engine. Since 2.16
@G_REGEX_ERROR_STRAY_BACKSLASH: "\\" at end of pattern. Since 2.16
@G_REGEX_ERROR_MISSING_CONTROL_CHAR: "\\c" at end of pattern. Since 2.16
@G_REGEX_ERROR_UNRECOGNIZED_ESCAPE: Unrecognized character follows "\\". Since 2.16
@G_REGEX_ERROR_QUANTIFIERS_OUT_OF_ORDER: Numbers out of order in "{}" quantifier. Since 2.16
@G_REGEX_ERROR_QUANTIFIER_TOO_BIG: Number too big in "{}" quantifier. Since 2.16
@G_REGEX_ERROR_UNTERMINATED_CHARACTER_CLASS: Missing terminating "]" for character class. Since 2.16
@G_REGEX_ERROR_INVALID_ESCAPE_IN_CHARACTER_CLASS: Invalid escape sequence in character class. Since 2.16
@G_REGEX_ERROR_RANGE_OUT_OF_ORDER: Range out of order in character class. Since 2.16
@G_REGEX_ERROR_NOTHING_TO_REPEAT: Nothing to repeat. Since 2.16
@G_REGEX_ERROR_UNRECOGNIZED_CHARACTER: Unrecognized character after "(?", "(?&lt;" or "(?P". Since 2.16
@G_REGEX_ERROR_POSIX_NAMED_CLASS_OUTSIDE_CLASS: POSIX named classes are supported only within a class. Since 2.16
@G_REGEX_ERROR_UNMATCHED_PARENTHESIS: Missing terminating ")" or ")" without opening "(". Since 2.16
@G_REGEX_ERROR_INEXISTENT_SUBPATTERN_REFERENCE: Reference to non-existent subpattern. Since 2.16
@G_REGEX_ERROR_UNTERMINATED_COMMENT: Missing terminating ")" after comment. Since 2.16
@G_REGEX_ERROR_EXPRESSION_TOO_LARGE: Regular expression too large. Since 2.16
@G_REGEX_ERROR_MEMORY_ERROR: Failed to get memory. Since 2.16
@G_REGEX_ERROR_VARIABLE_LENGTH_LOOKBEHIND: Lookbehind assertion is not fixed length. Since 2.16
@G_REGEX_ERROR_MALFORMED_CONDITION: Malformed number or name after "(?(". Since 2.16
@G_REGEX_ERROR_TOO_MANY_CONDITIONAL_BRANCHES: Conditional group contains more than two branches. Since 2.16
@G_REGEX_ERROR_ASSERTION_EXPECTED: Assertion expected after "(?(". Since 2.16
@G_REGEX_ERROR_UNKNOWN_POSIX_CLASS_NAME: Unknown POSIX class name. Since 2.16
@G_REGEX_ERROR_POSIX_COLLATING_ELEMENTS_NOT_SUPPORTED: POSIX collating elements are not supported. Since 2.16
@G_REGEX_ERROR_HEX_CODE_TOO_LARGE: Character value in "\\x{...}" sequence is too large. Since 2.16
@G_REGEX_ERROR_INVALID_CONDITION: Invalid condition "(?(0)". Since 2.16
@G_REGEX_ERROR_SINGLE_BYTE_MATCH_IN_LOOKBEHIND: \\C not allowed in lookbehind assertion. Since 2.16
@G_REGEX_ERROR_INFINITE_LOOP: Recursive call could loop indefinitely. Since 2.16
@G_REGEX_ERROR_MISSING_SUBPATTERN_NAME_TERMINATOR: Missing terminator in subpattern name. Since 2.16
@G_REGEX_ERROR_DUPLICATE_SUBPATTERN_NAME: Two named subpatterns have the same name. Since 2.16
@G_REGEX_ERROR_MALFORMED_PROPERTY: Malformed "\\P" or "\\p" sequence. Since 2.16
@G_REGEX_ERROR_UNKNOWN_PROPERTY: Unknown property name after "\\P" or "\\p". Since 2.16
@G_REGEX_ERROR_SUBPATTERN_NAME_TOO_LONG: Subpattern name is too long (maximum 32 characters). Since 2.16
@G_REGEX_ERROR_TOO_MANY_SUBPATTERNS: Too many named subpatterns (maximum 10,000). Since 2.16
@G_REGEX_ERROR_INVALID_OCTAL_VALUE: Octal value is greater than "\\377". Since 2.16
@G_REGEX_ERROR_TOO_MANY_BRANCHES_IN_DEFINE: "DEFINE" group contains more than one branch. Since 2.16
@G_REGEX_ERROR_DEFINE_REPETION: Repeating a "DEFINE" group is not allowed. Since 2.16
@G_REGEX_ERROR_INCONSISTENT_NEWLINE_OPTIONS: Inconsistent newline options. Since 2.16
@G_REGEX_ERROR_MISSING_BACK_REFERENCE: "\\g" is not followed by a braced name or an
optionally braced non-zero number. Since 2.16
@Since: 2.14

<!-- ##### MACRO G_REGEX_ERROR ##### -->
<para>
Error domain for regular expressions. Errors in this domain will be from the #GRegexError enumeration. See #GError for information on error domains.
</para>

@Since: 2.14


<!-- ##### ENUM GRegexCompileFlags ##### -->
<para>
Flags specifying compile-time options.
</para>

@G_REGEX_CASELESS: Letters in the pattern match both upper and lower case
letters. This option can be changed within a pattern by a "(?i)" option
setting.
@G_REGEX_MULTILINE: By default, GRegex treats the strings as consisting
of a single line of characters (even if it actually contains newlines).
The "start of line" metacharacter ("^") matches only at the start of the
string, while the "end of line" metacharacter ("$") matches only at the
end of the string, or before a terminating newline (unless
#G_REGEX_DOLLAR_ENDONLY is set). When #G_REGEX_MULTILINE is set,
the "start of line" and "end of line" constructs match immediately following
or immediately before any newline in the string, respectively, as well
as at the very start and end. This can be changed within a pattern by a
"(?m)" option setting.
@G_REGEX_DOTALL: A dot metacharater (".") in the pattern matches all
characters, including newlines. Without it, newlines are excluded. This
option can be changed within a pattern by a ("?s") option setting.
@G_REGEX_EXTENDED: Whitespace data characters in the pattern are
totally ignored except when escaped or inside a character class.
Whitespace does not include the VT character (code 11). In addition,
characters between an unescaped "#" outside a character class and
the next newline character, inclusive, are also ignored. This can be
changed within a pattern by a "(?x)" option setting.
@G_REGEX_ANCHORED: The pattern is forced to be "anchored", that is,
it is constrained to match only at the first matching point in the string
that is being searched. This effect can also be achieved by appropriate
constructs in the pattern itself such as the "^" metacharater.
@G_REGEX_DOLLAR_ENDONLY: A dollar metacharacter ("$") in the pattern
matches only at the end of the string. Without this option, a dollar also
matches immediately before the final character if it is a newline (but
not before any other newlines). This option is ignored if
#G_REGEX_MULTILINE is set.
@G_REGEX_UNGREEDY: Inverts the "greediness" of the
quantifiers so that they are not greedy by default, but become greedy
if followed by "?". It can also be set by a "(?U)" option setting within
the pattern.
@G_REGEX_RAW: Usually strings must be valid UTF-8 strings, using this
flag they are considered as a raw sequence of bytes.
@G_REGEX_NO_AUTO_CAPTURE: Disables the use of numbered capturing
parentheses in the pattern. Any opening parenthesis that is not followed
by "?" behaves as if it were followed by "?:" but named parentheses can
still be used for capturing (and they acquire numbers in the usual way).
@G_REGEX_OPTIMIZE: Optimize the regular expression. If the pattern will
be used many times, then it may be worth the effort to optimize it to
improve the speed of matches.
@G_REGEX_DUPNAMES: Names used to identify capturing subpatterns need not
be unique. This can be helpful for certain types of pattern when it is known
that only one instance of the named subpattern can ever be matched.
@G_REGEX_NEWLINE_CR: Usually any newline character is recognized, if this
option is set, the only recognized newline character is '\r'.
@G_REGEX_NEWLINE_LF: Usually any newline character is recognized, if this
option is set, the only recognized newline character is '\n'.
@G_REGEX_NEWLINE_CRLF: Usually any newline character is recognized, if this
option is set, the only recognized newline character sequence is '\r\n'.
@Since: 2.14

<!-- ##### ENUM GRegexMatchFlags ##### -->
<para>
Flags specifying match-time options.
</para>

@G_REGEX_MATCH_ANCHORED: The pattern is forced to be "anchored", that is,
it is constrained to match only at the first matching point in the string
that is being searched. This effect can also be achieved by appropriate
constructs in the pattern itself such as the "^" metacharater.
@G_REGEX_MATCH_NOTBOL: Specifies that first character of the string is
not the beginning of a line, so the circumflex metacharacter should not
match before it. Setting this without G_REGEX_MULTILINE (at compile time)
causes circumflex never to match. This option affects only the behaviour of
the circumflex metacharacter, it does not affect "\A".
@G_REGEX_MATCH_NOTEOL: Specifies that the end of the subject string is
not the end of a line, so the dollar metacharacter should not match it nor
(except in multiline mode) a newline immediately before it. Setting this
without G_REGEX_MULTILINE (at compile time) causes dollar never to match.
This option affects only the behaviour of the dollar metacharacter, it does
not affect "\Z" or "\z".
@G_REGEX_MATCH_NOTEMPTY: An empty string is not considered to be a valid
match if this option is set. If there are alternatives in the pattern, they
are tried. If all the alternatives match the empty string, the entire match
fails. For example, if the pattern "a?b?" is applied to a string not beginning
with "a" or "b", it matches the empty string at the start of the string.
With this flag set, this match is not valid, so GRegex searches further
into the string for occurrences of "a" or "b".
@G_REGEX_MATCH_PARTIAL: Turns on the partial matching feature, for more
documentation on partial matching see g_match_info_is_partial_match().
@G_REGEX_MATCH_NEWLINE_CR: Overrides the newline definition set when creating
a new #GRegex, setting the '\r' character as line terminator.
@G_REGEX_MATCH_NEWLINE_LF: Overrides the newline definition set when creating
a new #GRegex, setting the '\n' character as line terminator.
@G_REGEX_MATCH_NEWLINE_CRLF: Overrides the newline definition set when creating
a new #GRegex, setting the '\r\n' characters as line terminator.
@G_REGEX_MATCH_NEWLINE_ANY: Overrides the newline definition set when creating
a new #GRegex, any newline character or character sequence is recognized.
@Since: 2.14

<!-- ##### STRUCT GRegex ##### -->
<para>
A GRegex is the "compiled" form of a regular expression pattern. This
structure is opaque and its fields cannot be accessed directly.
</para>

@Since: 2.14

<!-- ##### USER_FUNCTION GRegexEvalCallback ##### -->
<para>
Specifies the type of the function passed to g_regex_replace_eval().
It is called for each occurance of the pattern in the string passed
to g_regex_replace_eval(), and it should append the replacement to
@result.
</para>

@match_info: the #GMatchInfo generated by the match. 
Use g_match_info_get_regex() and g_match_info_get_string() if you 
need the #GRegex or the matched string.
@result: a #GString containing the new string
@user_data: user data passed to g_regex_replace_eval()
@Returns: %FALSE to continue the replacement process, %TRUE to stop it
@Since: 2.14


<!-- ##### FUNCTION g_regex_new ##### -->
<para>

</para>

@pattern: 
@compile_options: 
@match_options: 
@error: 
@Returns: 


<!-- ##### FUNCTION g_regex_ref ##### -->
<para>

</para>

@regex: 
@Returns: 


<!-- ##### FUNCTION g_regex_unref ##### -->
<para>

</para>

@regex: 


<!-- ##### FUNCTION g_regex_get_pattern ##### -->
<para>

</para>

@regex: 
@Returns: 


<!-- ##### FUNCTION g_regex_get_max_backref ##### -->
<para>

</para>

@regex: 
@Returns: 


<!-- ##### FUNCTION g_regex_get_capture_count ##### -->
<para>

</para>

@regex: 
@Returns: 


<!-- ##### FUNCTION g_regex_get_string_number ##### -->
<para>

</para>

@regex: 
@name: 
@Returns: 


<!-- ##### FUNCTION g_regex_escape_string ##### -->
<para>

</para>

@string: 
@length: 
@Returns: 


<!-- ##### FUNCTION g_regex_match_simple ##### -->
<para>

</para>

@pattern: 
@string: 
@compile_options: 
@match_options: 
@Returns: 


<!-- ##### FUNCTION g_regex_match ##### -->
<para>

</para>

@regex: 
@string: 
@match_options: 
@match_info: 
@Returns: 


<!-- ##### FUNCTION g_regex_match_full ##### -->
<para>

</para>

@regex: 
@string: 
@string_len: 
@start_position: 
@match_options: 
@match_info: 
@error: 
@Returns: 


<!-- ##### FUNCTION g_regex_match_all ##### -->
<para>

</para>

@regex: 
@string: 
@match_options: 
@match_info: 
@Returns: 


<!-- ##### FUNCTION g_regex_match_all_full ##### -->
<para>

</para>

@regex: 
@string: 
@string_len: 
@start_position: 
@match_options: 
@match_info: 
@error: 
@Returns: 


<!-- ##### FUNCTION g_regex_split_simple ##### -->
<para>

</para>

@pattern: 
@string: 
@compile_options: 
@match_options: 
@Returns: 


<!-- ##### FUNCTION g_regex_split ##### -->
<para>

</para>

@regex: 
@string: 
@match_options: 
@Returns: 


<!-- ##### FUNCTION g_regex_split_full ##### -->
<para>

</para>

@regex: 
@string: 
@string_len: 
@start_position: 
@match_options: 
@max_tokens: 
@error: 
@Returns: 


<!-- ##### FUNCTION g_regex_replace ##### -->
<para>

</para>

@regex: 
@string: 
@string_len: 
@start_position: 
@replacement: 
@match_options: 
@error: 
@Returns: 


<!-- ##### FUNCTION g_regex_replace_literal ##### -->
<para>

</para>

@regex: 
@string: 
@string_len: 
@start_position: 
@replacement: 
@match_options: 
@error: 
@Returns: 


<!-- ##### FUNCTION g_regex_replace_eval ##### -->
<para>

</para>

@regex: 
@string: 
@string_len: 
@start_position: 
@match_options: 
@eval: 
@user_data: 
@error: 
@Returns: 


<!-- ##### FUNCTION g_regex_check_replacement ##### -->
<para>

</para>

@replacement: 
@has_references: 
@error: 
@Returns: 


<!-- ##### STRUCT GMatchInfo ##### -->
<para>
#GMatchInfo is used to retrieve information about the regular expression match
which created it.
This structure is opaque and its fields cannot be accessed directly.
</para>

@Since: 2.14

<!-- ##### FUNCTION g_match_info_get_regex ##### -->
<para>

</para>

@match_info: 
@Returns: 


<!-- ##### FUNCTION g_match_info_get_string ##### -->
<para>

</para>

@match_info: 
@Returns: 


<!-- ##### FUNCTION g_match_info_free ##### -->
<para>

</para>

@match_info: 


<!-- ##### FUNCTION g_match_info_matches ##### -->
<para>

</para>

@match_info: 
@Returns: 


<!-- ##### FUNCTION g_match_info_next ##### -->
<para>

</para>

@match_info: 
@error: 
@Returns: 


<!-- ##### FUNCTION g_match_info_get_match_count ##### -->
<para>

</para>

@match_info: 
@Returns: 


<!-- ##### FUNCTION g_match_info_is_partial_match ##### -->
<para>

</para>

@match_info: 
@Returns: 


<!-- ##### FUNCTION g_match_info_expand_references ##### -->
<para>

</para>

@match_info: 
@string_to_expand: 
@error: 
@Returns: 


<!-- ##### FUNCTION g_match_info_fetch ##### -->
<para>

</para>

@match_info: 
@match_num: 
@Returns: 


<!-- ##### FUNCTION g_match_info_fetch_pos ##### -->
<para>

</para>

@match_info: 
@match_num: 
@start_pos: 
@end_pos: 
@Returns: 


<!-- ##### FUNCTION g_match_info_fetch_named ##### -->
<para>

</para>

@match_info: 
@name: 
@Returns: 


<!-- ##### FUNCTION g_match_info_fetch_named_pos ##### -->
<para>

</para>

@match_info: 
@name: 
@start_pos: 
@end_pos: 
@Returns: 


<!-- ##### FUNCTION g_match_info_fetch_all ##### -->
<para>

</para>

@match_info: 
@Returns: