\input texinfo   @c -*-texinfo-*-
@c %**start of header
@setfilename libtool.info
@settitle Libtool
@c For double-sided printing, uncomment:
@c @setchapternewpage odd
@c %**end of header

@include version.texi
@set BUGADDR the Libtool bug reporting address @email{bug-libtool@@gnu.org}
@set MAILLIST the Libtool mailing list @email{libtool@@gnu.org}
@set objdir .libs

@dircategory GNU programming tools
@direntry
* Libtool: (libtool).           Generic shared library support script.
@end direntry

@dircategory Individual utilities
@direntry
* libtoolize: (libtool)Invoking libtoolize.     Adding libtool support.
@end direntry

@ifnottex
This file documents GNU Libtool @value{VERSION}

Copyright (C) 1996-2008 Free Software Foundation, Inc.

Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.2
or any later version published by the Free Software Foundation;
with no Invariant Sections, with no Front-Cover Texts,
and with no Back-Cover Texts.  A copy of the license is included in
the section entitled "GNU Free Documentation License".

@ignore
Permission is granted to process this file through TeX and print the
results, provided the printed document carries copying permission notice
identical to this one except for the removal of this paragraph

@end ignore
@end ifnottex

@titlepage
@title GNU Libtool
@subtitle For version @value{VERSION}, @value{UPDATED}
@author Gordon Matzigkeit
@author Alexandre Oliva
@author Thomas Tanner
@author Gary V. Vaughan

@page
@vskip 0pt plus 1filll
Copyright @copyright{} 2008 Free Software Foundation, Inc.

Permission is granted to copy, distribute and/or modify this document
under the terms of the @sc{gnu} Free Documentation License, Version 1.2
or any later version published by the Free Software Foundation;
with no Invariant Sections, with no Front-Cover Texts,
and with no Back-Cover Texts.  A copy of the license is included in
the section entitled "@sc{gnu} Free Documentation License".

@end titlepage

@c Put everything in one index (arbitrarily chosen to be the concept index).
@syncodeindex vr cp
@syncodeindex fn cp
@syncodeindex tp cp
@synindex pg cp

@ifnottex
@node Top, Introduction, (dir), (dir)
@comment  node-name,  next,  previous,  up
@top Shared library support for GNU

This file documents @sc{gnu} Libtool, a script that allows package developers
to provide generic shared library support.  This edition documents
version @value{VERSION}.

@xref{Reporting bugs}, for information on how to report problems with
@sc{gnu} Libtool.

@menu
* Introduction::                What the heck is libtool?
* Libtool paradigm::            How libtool's view of libraries is different.
* Using libtool::               Example of using libtool to build libraries.
* Invoking libtool::            Running the @code{libtool} script.
* Integrating libtool::         Using libtool in your own packages.
* Other languages::             Using libtool without a C compiler.
* Versioning::                  Using library interface versions.
* Library tips::                Tips for library interface design.
* Inter-library dependencies::  Libraries that depend on other libraries.
* Dlopened modules::            @code{dlopen}ing libtool-created libraries.
* Using libltdl::               Libtool's portable @code{dlopen} wrapper library.
* Trace interface::             Libtool's trace interface.
* Troubleshooting::             When libtool doesn't work as advertised.
* Maintaining::                 Information used by the libtool maintainer.
* GNU Free Documentation License:: License for this manual.
* Index::                       Full index.

@detailmenu
 --- The Detailed Node Listing ---

Introduction

* Motivation::                  Why does GNU need a libtool?
* Issues::                      The problems that need to be addressed.
* Other implementations::       How other people have solved these issues.
* Postmortem::                  Learning from past difficulties.

Using libtool

* Creating object files::       Compiling object files for libraries.
* Linking libraries::           Creating libraries from object files.
* Linking executables::         Linking object files against libtool libraries.
* Debugging executables::       Running GDB on libtool-generated programs.
* Installing libraries::        Making libraries available to users.
* Installing executables::      Making programs available to users.
* Static libraries::            When shared libraries are not wanted.

Invoking @code{libtool}

* Compile mode::                Creating library object files.
* Link mode::                   Generating executables and libraries.
* Execute mode::                Debugging libtool-generated programs.
* Install mode::                Making libraries and executables public.
* Finish mode::                 Completing a library installation.
* Uninstall mode::              Removing installed executables and libraries.
* Clean mode::                  Removing uninstalled executables and libraries.

Integrating libtool with your package

* Autoconf macros::             Autoconf macros exported by libtool.
* Makefile rules::              Writing @file{Makefile} rules for libtool.
* Using Automake::              Automatically supporting libtool.
* Configuring::                 Configuring libtool for a host system.
* Distributing::                What files to distribute with your package.
* Static-only libraries::       Sometimes shared libraries are just a pain.

Configuring libtool

* LT_INIT::                     Configuring @code{libtool} in @file{configure.ac}.
* Configure notes::             Platform-specific notes for configuration.

Including libtool in your package

* Invoking libtoolize::         @code{libtoolize} command line options.
* Autoconf and LTLIBOBJS::      Autoconf automates LTLIBOBJS generation.

Using libtool with other languages

* C++ libraries::               Writing libraries for C++
* Tags::                        Tags

Library interface versions

* Interfaces::                  What are library interfaces?
* Libtool versioning::          Libtool's versioning system.
* Updating version info::       Changing version information before releases.
* Release numbers::             Breaking binary compatibility for aesthetics.

Tips for interface design

* C header files::              How to write portable include files.

Dlopened modules

* Building modules::            Creating dlopenable objects and libraries.
* Dlpreopening::                Dlopening that works on static platforms.
* Linking with dlopened modules:: Using dlopenable modules in libraries.
* Finding the dlname::          Choosing the right file to @code{dlopen}.
* Dlopen issues::               Unresolved problems that need your attention.

Using libltdl

* Libltdl interface::           How to use libltdl in your programs.
* Modules for libltdl::         Creating modules that can be @code{dlopen}ed.
* Thread Safety in libltdl::    Registering callbacks for multi-thread safety.
* User defined module data::    Associating data with loaded modules.
* Module loaders for libltdl::  Creating user defined module loaders.
* Distributing libltdl::        How to distribute libltdl with your package.

Troubleshooting

* Libtool test suite::          Libtool's self-tests.
* Reporting bugs::              How to report problems with libtool.

The libtool test suite

* Test descriptions::           The contents of the test suite.
* When tests fail::             What to do when a test fails.

Maintenance notes for libtool

* New ports::                   How to port libtool to new systems.
* Tested platforms::            When libtool was last tested.
* Platform quirks::             Information about different library systems.
* libtool script contents::     Configuration information that libtool uses.
* Cheap tricks::                Making libtool maintainership easier.

Porting libtool to new systems

* Information sources::         Where to find relevant documentation
* Porting inter-library dependencies::  Implementation details explained

Platform quirks

* References::                  Finding more information.
* Compilers::                   Creating object files from source files.
* Reloadable objects::          Binding object files together.
* Multiple dependencies::       Removing duplicate dependent libraries.
* Archivers::                   Programs that create static archives.

@end detailmenu
@end menu

@end ifnottex

@node Introduction
@chapter Introduction

In the past, if a source code package developer wanted to take advantage
of the power of shared libraries, he needed to write custom support code
for each platform on which his package ran.  He also had to design a
configuration interface so that the package installer could choose what
sort of libraries were built.

@sc{gnu} Libtool simplifies the developer's job by encapsulating both the
platform-specific dependencies, and the user interface, in a single
script.  @sc{gnu} Libtool is designed so that the complete functionality of
each host type is available via a generic interface, but nasty quirks
are hidden from the programmer.

@sc{gnu} Libtool's consistent interface is reassuring@dots{} users don't need
to read obscure documentation in order to have their favorite source
package build shared libraries.  They just run your package
@code{configure} script (or equivalent), and libtool does all the dirty
work.

There are several examples throughout this document.  All assume the
same environment: we want to build a library, @file{libhello}, in a
generic way.

@file{libhello} could be a shared library, a static library, or
both@dots{} whatever is available on the host system, as long as libtool
has been ported to it.

This chapter explains the original design philosophy of libtool.  Feel
free to skip to the next chapter, unless you are interested in history,
or want to write code to extend libtool in a consistent way.

@menu
* Motivation::                  Why does GNU need a libtool?
* Issues::                      The problems that need to be addressed.
* Other implementations::       How other people have solved these issues.
* Postmortem::                  Learning from past difficulties.
@end menu

@node Motivation
@section Motivation for writing libtool

@cindex motivation for writing libtool
@cindex design philosophy
Since early 1995, several different @sc{gnu} developers have recognized the
importance of having shared library support for their packages.  The
primary motivation for such a change is to encourage modularity and
reuse of code (both conceptually and physically) in @sc{gnu} programs.

Such a demand means that the way libraries are built in @sc{gnu} packages
needs to be general, to allow for any library type the package installer
might want.  The problem is compounded by the absence of a standard
procedure for creating shared libraries on different platforms.

The following sections outline the major issues facing shared library
support in @sc{gnu}, and how shared library support could be standardized
with libtool.

@cindex specifications for libtool
@cindex libtool specifications
The following specifications were used in developing and evaluating this
system:

@enumerate
@item
The system must be as elegant as possible.

@item
The system must be fully integrated with the @sc{gnu} Autoconf and Automake
utilities, so that it will be easy for @sc{gnu} maintainers to use.  However,
the system must not require these tools, so that it can be used by
non-@sc{gnu} packages.

@item
Portability to other (non-@sc{gnu}) architectures and tools is desirable.
@end enumerate

@node Issues
@section Implementation issues

@cindex tricky design issues
@cindex design issues
The following issues need to be addressed in any reusable shared library
system, specifically libtool:

@enumerate
@item
The package installer should be able to control what sort of libraries
are built.

@item
It can be tricky to run dynamically linked programs whose libraries have
not yet been installed.  @code{LD_LIBRARY_PATH} must be set properly (if
it is supported), or programs fail to run.

@item
The system must operate consistently even on hosts that don't support
shared libraries.

@item
The commands required to build shared libraries may differ wildly from
host to host.  These need to be determined at configure time in
a consistent way.

@item
It is not always obvious with what prefix or suffix a shared library
should be installed.  This makes it difficult for @file{Makefile} rules,
since they generally assume that file names are the same from host to
host.

@item
The system needs a simple library version number abstraction, so that
shared libraries can be upgraded in place.  The programmer should be
informed how to design the interfaces to the library to maximize binary
compatibility.

@item
The install @file{Makefile} target should warn the package installer to set
the proper environment variables (@code{LD_LIBRARY_PATH} or equivalent),
or run @command{ldconfig}.
@end enumerate

@node Other implementations
@section Other implementations

Even before libtool was developed, many free software packages built and
installed their own shared libraries.  At first, these packages were
examined to avoid reinventing existing features.

Now it is clear that none of these packages have documented the details
of shared library systems that libtool requires.  So, other packages
have been more or less abandoned as influences.

@node Postmortem
@section A postmortem analysis of other implementations

@cindex other implementations, flaws in
@cindex reusability of library systems
In all fairness, each of the implementations that were examined do the
job that they were intended to do, for a number of different host
systems.  However, none of these solutions seem to function well as a
generalized, reusable component.

@cindex complexity of library systems
Most were too complex to use (much less modify) without understanding
exactly what the implementation does, and they were generally not
documented.

The main difficulty is that different vendors have different views of
what libraries are, and none of the packages that were examined seemed
to be confident enough to settle on a single paradigm that just
@emph{works}.

Ideally, libtool would be a standard that would be implemented as series
of extensions and modifications to existing library systems to make them
work consistently.  However, it is not an easy task to convince
operating system developers to mend their evil ways, and people want to
build shared libraries right now, even on buggy, broken, confused
operating systems.

For this reason, libtool was designed as an independent shell script.
It isolates the problems and inconsistencies in library building that
plague @file{Makefile} writers by wrapping the compiler suite on
different platforms with a consistent, powerful interface.

With luck, libtool will be useful to and used by the @sc{gnu} community, and
that the lessons that were learned in writing it will be taken up by
designers of future library systems.

@node Libtool paradigm
@chapter The libtool paradigm

At first, libtool was designed to support an arbitrary number of library
object types.  After libtool was ported to more platforms, a new
paradigm gradually developed for describing the relationship between
libraries and programs.

@cindex definition of libraries
@cindex libraries, definition of
In summary, ``libraries are programs with multiple entry points, and
more formally defined interfaces.''

Version 0.7 of libtool was a complete redesign and rewrite of libtool to
reflect this new paradigm.  So far, it has proved to be successful:
libtool is simpler and more useful than before.

The best way to introduce the libtool paradigm is to contrast it with
the paradigm of existing library systems, with examples from each.  It
is a new way of thinking, so it may take a little time to absorb, but
when you understand it, the world becomes simpler.

@node Using libtool
@chapter Using libtool

@cindex examples of using libtool
@cindex libtool examples
It makes little sense to talk about using libtool in your own packages
until you have seen how it makes your life simpler.  The examples in
this chapter introduce the main features of libtool by comparing the
standard library building procedure to libtool's operation on two
different platforms:

@table @samp
@item a23
An Ultrix 4.2 platform with only static libraries.

@item burger
A NetBSD/i386 1.2 platform with shared libraries.
@end table

You can follow these examples on your own platform, using the
preconfigured libtool script that was installed with libtool
(@pxref{Configuring}).

Source files for the following examples are taken from the @file{demo}
subdirectory of the libtool distribution.  Assume that we are building a
library, @file{libhello}, out of the files @file{foo.c} and
@file{hello.c}.

Note that the @file{foo.c} source file uses the @code{cos} math library
function, which is usually found in the standalone math library, and not
the C library (@pxref{Trig Functions, , Trigonometric Functions, libc,
The GNU C Library Reference Manual}).  So, we need to add @option{-lm} to
the end of the link line whenever we link @file{foo.lo} into an
executable or a library (@pxref{Inter-library dependencies}).

The same rule applies whenever you use functions that don't appear in
the standard C library@dots{} you need to add the appropriate
@option{-l@var{name}} flag to the end of the link line when you link
against those objects.

After we have built that library, we want to create a program by linking
@file{main.o} against @file{libhello}.

@menu
* Creating object files::       Compiling object files for libraries.
* Linking libraries::           Creating libraries from object files.
* Linking executables::         Linking object files against libtool libraries.
* Debugging executables::       Running GDB on libtool-generated programs.
* Installing libraries::        Making libraries available to users.
* Installing executables::      Making programs available to users.
* Static libraries::            When shared libraries are not wanted.
@end menu

@node Creating object files
@section Creating object files

@cindex compiling object files
@cindex object files, compiling
To create an object file from a source file, the compiler is invoked
with the @option{-c} flag (and any other desired flags):

@example
burger$ @kbd{gcc -g -O -c main.c}
burger$
@end example

The above compiler command produces an object file, usually named
@file{main.o}, from the source file @file{main.c}.

For most library systems, creating object files that become part of a
static library is as simple as creating object files that are linked to
form an executable:

@example
burger$ @kbd{gcc -g -O -c foo.c}
burger$ @kbd{gcc -g -O -c hello.c}
burger$
@end example

@cindex position-independent code
@cindex PIC (position-independent code)
Shared libraries, however, may only be built from
@dfn{position-independent code} (PIC).  So, special flags must be passed
to the compiler to tell it to generate PIC rather than the standard
position-dependent code.

@cindex library object file
@cindex @samp{.lo} files
@cindex object files, library
Since this is a library implementation detail, libtool hides the
complexity of PIC compiler flags and uses separate library object files
(the PIC one lives in the @samp{@value{objdir}} subdirectory and the
static one lives in the current directory).  On systems without shared
libraries, the PIC library object files are not created, whereas on
systems where all code is PIC, such as AIX, the static ones are not
created.

To create library object files for @file{foo.c} and @file{hello.c},
simply invoke libtool with the standard compilation command as
arguments (@pxref{Compile mode}):

@example
a23$ @kbd{libtool --mode=compile gcc -g -O -c foo.c}
gcc -g -O -c foo.c -o foo.o
a23$ @kbd{libtool --mode=compile gcc -g -O -c hello.c}
gcc -g -O -c hello.c -o hello.o
a23$
@end example

Note that libtool silently creates an additional control file on each
@samp{compile} invocation.  The @samp{.lo} file is the libtool object,
which Libtool uses to determine what object file may be built into a
shared library.  On @samp{a23}, only static libraries are supported so
the library objects look like this:

@example
# foo.lo - a libtool object file
# Generated by ltmain.sh (GNU libtool) @value{VERSION}
#
# Please DO NOT delete this file!
# It is necessary for linking the library.

# Name of the PIC object.
pic_object=none

# Name of the non-PIC object.
non_pic_object='foo.o'
@end example

On shared library systems, libtool automatically generates an
additional PIC object by inserting the appropriate PIC generation
flags into the compilation command:

@example
burger$ @kbd{libtool --mode=compile gcc -g -O -c foo.c}
mkdir @value{objdir}
gcc -g -O -c foo.c  -fPIC -DPIC -o @value{objdir}/foo.o
gcc -g -O -c foo.c -o foo.o >/dev/null 2>&1
burger$
@end example

Note that Libtool automatically created @samp{@value{objdir}} directory
upon its first execution, where PIC library object files will be stored.

Since @samp{burger} supports shared libraries, and requires PIC
objects to build them, Libtool has compiled a PIC object this time,
and made a note of it in the libtool object:

@example
# foo.lo - a libtool object file
# Generated by ltmain.sh (GNU libtool) @value{VERSION}
#
# Please DO NOT delete this file!
# It is necessary for linking the library.

# Name of the PIC object.
pic_object='@value{objdir}/foo.o'

# Name of the non-PIC object.
non_pic_object='foo.o'
@end example

@cindex -no-suppress, libtool compile mode option
Notice that the second run of GCC has its output discarded.  This is
done so that compiler warnings aren't annoyingly duplicated.  If you
need to see both sets of warnings (you might have conditional code
inside @samp{#ifdef PIC} for example), you can turn off suppression with
the @option{-no-suppress} option to libtool's compile mode:

@example
burger$ @kbd{libtool --mode=compile gcc -no-suppress -g -O -c hello.c}
gcc -g -O -c hello.c  -fPIC -DPIC -o @value{objdir}/hello.o
gcc -g -O -c hello.c -o hello.o
burger$
@end example


@node Linking libraries
@section Linking libraries

@pindex ar
Without libtool, the programmer would invoke the @command{ar} command to
create a static library:

@example
burger$ @kbd{ar cru libhello.a hello.o foo.o}
burger$
@end example

@pindex ranlib
But of course, that would be too simple, so many systems require that
you run the @code{ranlib} command on the resulting library (to give it
better karma, or something):

@example
burger$ @kbd{ranlib libhello.a}
burger$
@end example

It seems more natural to use the C compiler for this task, given
libtool's ``libraries are programs'' approach.  So, on platforms without
shared libraries, libtool simply acts as a wrapper for the system
@command{ar} (and possibly @code{ranlib}) commands.

@cindex libtool libraries
@cindex @samp{.la} files
Again, the libtool control file name (@samp{.la} suffix) differs from
the standard library name (@samp{.a} suffix).  The arguments to
libtool are the same ones you would use to produce an executable named
@file{libhello.la} with your compiler (@pxref{Link mode}):

@example
a23$ @kbd{libtool --mode=link gcc -g -O -o libhello.la foo.o hello.o}
*** Warning: Linking the shared library libhello.la against the non-libtool
*** objects  foo.o hello.o is not portable!
ar cru .libs/libhello.a
ranlib .libs/libhello.a
creating libhello.la
(cd .libs && rm -f libhello.la && ln -s ../libhello.la libhello.la)
a23$
@end example

Aha!  Libtool caught a common error@dots{} trying to build a library
from standard objects instead of special @samp{.lo} object files.  This
doesn't matter so much for static libraries, but on shared library
systems, it is of great importance.  (Note that you may replace
@file{libhello.la} with @file{libhello.a} in which case libtool won't
issue the warning any more.  But although this method works, this is
not intended to be used because it makes you lose the benefits of
using Libtool.)

So, let's try again, this time with the library object files.  Remember
also that we need to add @option{-lm} to the link command line because
@file{foo.c} uses the @code{cos} math library function (@pxref{Using
libtool}).

Another complication in building shared libraries is that we need to
specify the path to the directory in which they (eventually) will be
installed (in this case, @file{/usr/local/lib})@footnote{If you don't
specify an @code{rpath}, then libtool builds a libtool convenience
archive, not a shared library (@pxref{Static libraries}).}:

@example
a23$ @kbd{libtool --mode=link gcc -g -O -o libhello.la foo.lo hello.lo \
                -rpath /usr/local/lib -lm}
ar cru @value{objdir}/libhello.a foo.o hello.o
ranlib @value{objdir}/libhello.a
creating libhello.la
(cd @value{objdir} && rm -f libhello.la && ln -s ../libhello.la libhello.la)
a23$
@end example

Now, let's try the same trick on the shared library platform:

@example
burger$ @kbd{libtool --mode=link gcc -g -O -o libhello.la foo.lo hello.lo \
                -rpath /usr/local/lib -lm}
rm -fr  @value{objdir}/libhello.a @value{objdir}/libhello.la
ld -Bshareable -o @value{objdir}/libhello.so.0.0 @value{objdir}/foo.o @value{objdir}/hello.o -lm
ar cru @value{objdir}/libhello.a foo.o hello.o
ranlib @value{objdir}/libhello.a
creating libhello.la
(cd @value{objdir} && rm -f libhello.la && ln -s ../libhello.la libhello.la)
burger$
@end example

Now that's significantly cooler@dots{} Libtool just ran an obscure
@command{ld} command to create a shared library, as well as the static
library.

@cindex @file{@value{objdir}} subdirectory
Note how libtool creates extra files in the @file{@value{objdir}}
subdirectory, rather than the current directory.  This feature is to
make it easier to clean up the build directory, and to help ensure that
other programs fail horribly if you accidentally forget to use libtool
when you should.

Again, you may want to have a look at the @samp{.la} file in order
to see what Libtool stores in it.  In particular, you will see that
Libtool uses this file to remember the destination directory for the
library (the argument to @option{-rpath}) as well as the dependency
on the math library (@samp{-lm}).

@node Linking executables
@section Linking executables

@cindex linking against installed libraries
If you choose at this point to @dfn{install} the library (put it in a
permanent location) before linking executables against it, then you
don't need to use libtool to do the linking.  Simply use the appropriate
@option{-L} and @option{-l} flags to specify the library's location.

@cindex buggy system linkers
Some system linkers insist on encoding the full directory name of each
shared library in the resulting executable.  Libtool has to work around
this misfeature by special magic to ensure that only permanent directory
names are put into installed executables.

@cindex security problems with buggy linkers
@cindex bugs, subtle ones caused by buggy linkers
The importance of this bug must not be overlooked: it won't cause
programs to crash in obvious ways.  It creates a security hole,
and possibly even worse, if you are modifying the library source code
after you have installed the package, you will change the behaviour of
the installed programs!

So, if you want to link programs against the library before you install
it, you must use libtool to do the linking.

@cindex linking against uninstalled libraries
Here's the old way of linking against an uninstalled library:

@example
burger$ @kbd{gcc -g -O -o hell.old main.o libhello.a -lm}
burger$
@end example

Libtool's way is almost the same@footnote{However, you should avoid using
@option{-L} or @option{-l} flags to link against an uninstalled libtool
library.  Just specify the relative path to the @samp{.la} file, such as
@file{../intl/libintl.la}.  This is a design decision to eliminate any
ambiguity when linking against uninstalled shared libraries.}
(@pxref{Link mode}):

@example
a23$ @kbd{libtool --mode=link gcc -g -O -o hell main.o libhello.la}
gcc -g -O -o hell main.o  ./@value{objdir}/libhello.a -lm
a23$
@end example

That looks too simple to be true.  All libtool did was transform
@file{libhello.la} to @file{./@value{objdir}/libhello.a}, but remember
that @samp{a23} has no shared libraries.  Notice that Libtool also
remembered that @file{libhello.la} depends on @option{-lm}, so even
though we didn't specify @option{-lm} on the libtool command
line@footnote{
@c
And why should we? @file{main.o} doesn't directly depend on @option{-lm}
after all.
@c
} Libtool has added it to the @command{gcc} link line for us.

On @samp{burger} Libtool links against the uninstalled shared library:

@example
burger$ @kbd{libtool --mode=link gcc -g -O -o hell main.o libhello.la}
gcc -g -O -o @value{objdir}/hell main.o -L./@value{objdir} -R/usr/local/lib -lhello -lm
creating hell
burger$
@end example

@cindex linking with installed libtool libraries
Now assume @file{libhello.la} had already been installed, and you want
to link a new program with it.  You could figure out where it lives by
yourself, then run:

@example
burger$ @kbd{gcc -g -O -o test test.o -L/usr/local/lib -lhello -lm}
@end example

However, unless @file{/usr/local/lib} is in the standard library search
path, you won't be able to run @code{test}.  However, if you use libtool
to link the already-installed libtool library, it will do The Right
Thing (TM) for you:

@example
burger$ @kbd{libtool --mode=link gcc -g -O -o test test.o \
                /usr/local/lib/libhello.la}
gcc -g -O -o @value{objdir}/test test.o -Wl,--rpath \
        -Wl,/usr/local/lib /usr/local/lib/libhello.a -lm
creating test
burger$
@end example

Note that libtool added the necessary run-time path flag, as well as
@option{-lm}, the library libhello.la depended upon.  Nice, huh?

@cindex wrapper scripts for programs
@cindex program wrapper scripts
Notice that the executable, @code{hell}, was actually created in the
@file{@value{objdir}} subdirectory.  Then, a wrapper script was created
in the current directory.

Since libtool created a wrapper script, you should use libtool to
install it and debug it too.  However, since the program does not depend
on any uninstalled libtool library, it is probably usable even without
the wrapper script.

On NetBSD 1.2, libtool encodes the installation directory of
@file{libhello}, by using the @samp{-R/usr/local/lib} compiler flag.
Then, the wrapper script guarantees that the executable finds the
correct shared library (the one in @file{./@value{objdir}}) until it is
properly installed.

Let's compare the two different programs:

@example
burger$ @kbd{time ./hell.old}
Welcome to GNU Hell!
** This is not GNU Hello.  There is no built-in mail reader. **
        0.21 real         0.02 user         0.08 sys
burger$ @kbd{time ./hell}
Welcome to GNU Hell!
** This is not GNU Hello.  There is no built-in mail reader. **
        0.63 real         0.09 user         0.59 sys
burger$
@end example

The wrapper script takes significantly longer to execute, but at least
the results are correct, even though the shared library hasn't been
installed yet.

So, what about all the space savings that shared libraries are supposed
to yield?

@example
burger$ @kbd{ls -l hell.old libhello.a}
-rwxr-xr-x  1 gord  gord  15481 Nov 14 12:11 hell.old
-rw-r--r--  1 gord  gord   4274 Nov 13 18:02 libhello.a
burger$ @kbd{ls -l @value{objdir}/hell @value{objdir}/libhello.*}
-rwxr-xr-x  1 gord  gord  11647 Nov 14 12:10 @value{objdir}/hell
-rw-r--r--  1 gord  gord   4274 Nov 13 18:44 @value{objdir}/libhello.a
-rwxr-xr-x  1 gord  gord  12205 Nov 13 18:44 @value{objdir}/libhello.so.0.0
burger$
@end example

Well, that sucks.  Maybe I should just scrap this project and take up
basket weaving.

Actually, it just proves an important point: shared libraries incur
overhead because of their (relative) complexity.  In this situation, the
price of being dynamic is eight kilobytes, and the payoff is about four
kilobytes.  So, having a shared @file{libhello} won't be an advantage
until we link it against at least a few more programs.

@node Debugging executables
@section Debugging executables

If @file{hell} was a complicated program, you would certainly want to
test and debug it before installing it on your system.  In the above
section, you saw how the libtool wrapper script makes it possible to run
the program directly, but unfortunately, this mechanism interferes with
the debugger:

@example
burger$ @kbd{gdb hell}
GDB is free software and you are welcome to distribute copies of it
 under certain conditions; type "show copying" to see the conditions.
There is no warranty for GDB; type "show warranty" for details.
GDB 4.16 (i386-unknown-netbsd), (C) 1996 Free Software Foundation, Inc.

"hell": not in executable format: File format not recognized

(gdb) @kbd{quit}
burger$
@end example

Sad.  It doesn't work because GDB doesn't know where the executable
lives.  So, let's try again, by invoking GDB directly on the executable:

@example
burger$ @kbd{gdb @value{objdir}/hell}
GNU gdb 5.3 (i386-unknown-netbsd)
Copyright 2002 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License,
and you are welcome to change it and/or distribute copies of it
under certain conditions.  Type "show copying" to see the conditions.
There is no warranty for GDB.  Type "show warranty" for details.
(gdb) @kbd{break main}
Breakpoint 1 at 0x8048547: file main.c, line 29.
(gdb) @kbd{run}
Starting program: /home/src/libtool/demo/.libs/hell
/home/src/libtool/demo/.libs/hell: can't load library 'libhello.so.0'

Program exited with code 020.
(gdb) @kbd{quit}
burger$
@end example

Argh.  Now GDB complains because it cannot find the shared library that
@file{hell} is linked against.  So, we must use libtool in order to
properly set the library path and run the debugger.  Fortunately, we can
forget all about the @file{@value{objdir}} directory, and just run it on
the executable wrapper (@pxref{Execute mode}):

@example
burger$ @kbd{libtool --mode=execute gdb hell}
GNU gdb 5.3 (i386-unknown-netbsd)
Copyright 2002 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License,
and you are welcome to change it and/or distribute copies of it
under certain conditions.  Type "show copying" to see the conditions.
There is no warranty for GDB.  Type "show warranty" for details.
(gdb) @kbd{break main}
Breakpoint 1 at 0x8048547: file main.c, line 29.
(gdb) @kbd{run}
Starting program: /home/src/libtool/demo/.libs/hell

Breakpoint 1, main (argc=1, argv=0xbffffc40) at main.c:29
29        printf ("Welcome to GNU Hell!\n");
(gdb) @kbd{quit}
The program is running.  Quit anyway (and kill it)? (y or n) @kbd{y}
burger$
@end example

@node Installing libraries
@section Installing libraries

@pindex strip
Installing libraries on a non-libtool system is quite
straightforward@dots{} just copy them into place:@footnote{Don't
strip static libraries though, or they will be unusable.}

@pindex su
@example
burger$ @kbd{su}
Password: @kbd{********}
burger# @kbd{cp libhello.a /usr/local/lib/libhello.a}
burger#
@end example

Oops, don't forget the @command{ranlib} command:

@example
burger# @kbd{ranlib /usr/local/lib/libhello.a}
burger#
@end example

@pindex install
Libtool installation is quite simple, as well.  Just use the
@command{install} or @command{cp} command that you normally would
(@pxref{Install mode}):

@example
a23# @kbd{libtool --mode=install cp libhello.la /usr/local/lib/libhello.la}
cp libhello.la /usr/local/lib/libhello.la
cp @value{objdir}/libhello.a /usr/local/lib/libhello.a
ranlib /usr/local/lib/libhello.a
a23#
@end example

Note that the libtool library @file{libhello.la} is also installed, to
help libtool with uninstallation (@pxref{Uninstall mode}) and linking
(@pxref{Linking executables}) and to help programs with dlopening
(@pxref{Dlopened modules}).

Here is the shared library example:

@example
burger# @kbd{libtool --mode=install install -c libhello.la \
                /usr/local/lib/libhello.la}
install -c @value{objdir}/libhello.so.0.0 /usr/local/lib/libhello.so.0.0
install -c libhello.la /usr/local/lib/libhello.la
install -c @value{objdir}/libhello.a /usr/local/lib/libhello.a
ranlib /usr/local/lib/libhello.a
burger#
@end example

@cindex stripping libraries
@cindex libraries, stripping
It is safe to specify the @option{-s} (strip symbols) flag if you use a
BSD-compatible install program when installing libraries.
Libtool will either ignore the @option{-s} flag, or will run a program
that will strip only debugging and compiler symbols from the library.

Once the libraries have been put in place, there may be some additional
configuration that you need to do before using them.  First, you must
make sure that where the library is installed actually agrees with the
@option{-rpath} flag you used to build it.

@cindex postinstallation
@cindex installation, finishing
@cindex libraries, finishing installation
Then, running @samp{libtool -n finish @var{libdir}} can give you
further hints on what to do (@pxref{Finish mode}):

@example
burger# @kbd{libtool -n finish /usr/local/lib}
PATH="$PATH:/sbin" ldconfig -m /usr/local/lib
-----------------------------------------------------------------
Libraries have been installed in:
   /usr/local/lib

To link against installed libraries in a given directory, LIBDIR,
you must use the `-LLIBDIR' flag during linking.

 You will also need to do one of the following:
   - add LIBDIR to the `LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the `LD_RUN_PATH' environment variable
     during linking
   - use the `-RLIBDIR' linker flag

See any operating system documentation about shared libraries for
more information, such as the ld and ld.so manual pages.
-----------------------------------------------------------------
burger#
@end example

After you have completed these steps, you can go on to begin using the
installed libraries.  You may also install any executables that depend
on libraries you created.

@node Installing executables
@section Installing executables

If you used libtool to link any executables against uninstalled libtool
libraries (@pxref{Linking executables}), you need to use libtool to
install the executables after the libraries have been installed
(@pxref{Installing libraries}).

So, for our Ultrix example, we would run:

@example
a23# libtool --mode=install -c hell /usr/local/bin/hell
install -c hell /usr/local/bin/hell
a23#
@end example

On shared library systems that require wrapper scripts, libtool just
ignores the wrapper script and installs the correct binary:

@example
burger# libtool --mode=install -c hell /usr/local/bin/hell
install -c @value{objdir}/hell /usr/local/bin/hell
burger#
@end example


@node Static libraries
@section Linking static libraries

@cindex static linking
@cindex convenience libraries
Why return to @command{ar} and @command{ranlib} silliness when you've had a
taste of libtool?  Well, sometimes it is desirable to create a static
archive that can never be shared.  The most frequent case is when you
have a set of object files that you use to build several different
libraries.  You can create a ``convenience library'' out of those
objects, and link against that with the other libraries, instead of
listing all the object files every time.

If you just want to link this convenience library into programs, then
you could just ignore libtool entirely, and use the old @command{ar} and
@command{ranlib} commands (or the corresponding @sc{gnu} Automake
@samp{_LIBRARIES} rules).  You can even install a convenience library
using @sc{gnu} Libtool, though you probably don't want to and hence @sc{gnu}
Automake doesn't allow you to do so.

@example
burger$ @kbd{libtool --mode=install ./install-sh -c libhello.a \
                /local/lib/libhello.a}
./install-sh -c libhello.a /local/lib/libhello.a
ranlib /local/lib/libhello.a
burger$
@end example

Using libtool for static library installation protects your library from
being accidentally stripped (if the installer used the @option{-s} flag),
as well as automatically running the correct @command{ranlib} command.

But libtool libraries are more than just collections of object files:
they can also carry library dependency information, which old archives
do not.  If you want to create a libtool static convenience library, you
can omit the @option{-rpath} flag and use @option{-static} to indicate that
you're only interested in a static library.  When you link a program
with such a library, libtool will actually link all object files and
dependency libraries into the program.

If you omit both @option{-rpath} and @option{-static}, libtool will create a
convenience library that can be used to create other libtool
libraries, even shared ones.  Just like in the static case, the library
behaves as an alias to a set of object files and dependency libraries,
but in this case the object files are suitable for inclusion in shared
libraries.  But be careful not to link a single convenience library,
directly or indirectly, into a single program or library, otherwise you
may get errors about symbol redefinitions.

The key is remembering that a convenience library contains @sc{pic}
objects, and can be linked where a list of @sc{pic} objects makes sense;
i.e.@: into a shared library.  A static convenience library contains
non-@sc{pic} objects, so can be linked into an old static library, or
a program.

When @sc{gnu} Automake is used, you should use @code{noinst_LTLIBRARIES}
instead of @code{lib_LTLIBRARIES} for convenience libraries, so that
the @option{-rpath} option is not passed when they are linked.

As a rule of thumb, link a libtool convenience library into at most one
libtool library, and never into a program, and link libtool static
convenience libraries only into programs, and only if you need to carry
library dependency information to the user of the static convenience
library.

@cindex standalone binaries
Another common situation where static linking is desirable is in
creating a standalone binary.  Use libtool to do the linking and add the
@option{-all-static} flag.

@node Invoking libtool
@chapter Invoking @command{libtool}
@pindex libtool
@cindex libtool command options
@cindex options, libtool command
@cindex command options, libtool

The @command{libtool} program has the following synopsis:

@example
libtool [@var{option}]@dots{} [@var{mode-arg}]@dots{}
@end example

@noindent
and accepts the following options:

@table @option
@item --config
Display libtool configuration variables and exit.

@item --debug
Dump a trace of shell script execution to standard output.  This
produces a lot of output, so you may wish to pipe it to @command{less} (or
@command{more}) or redirect to a file.

@item -n
@itemx --dry-run
Don't create, modify, or delete any files, just show what commands would
be executed by libtool.

@item --features
Display basic configuration options.  This provides a way for packages
to determine whether shared or static libraries will be built.

@item --finish
Same as @option{--mode=finish}.

@item --help
Display a help message and exit.  If @option{--mode=@var{mode}} is
specified, then detailed help for @var{mode} is
displayed.

@item --mode=@var{mode}
Use @var{mode} as the operation mode.  When using libtool from the
command line, you can give just @var{mode} (or a unique abbreviation
of it) as the first argument as a shorthand for the full
@option{--mode=@var{mode}}.

@var{mode} must be set to one of the following:

@table @option
@item compile
Compile a source file into a libtool object.

@item execute
Automatically set the library path so that another program can use
uninstalled libtool-generated programs or libraries.

@item finish
Complete the installation of libtool libraries on the system.

@item install
Install libraries or executables.

@item link
Create a library or an executable.

@item uninstall
Delete installed libraries or executables.

@item clean
Delete uninstalled libraries or executables.
@end table

@item --tag=@var{tag}
Use configuration variables from tag @var{tag} (@pxref{Tags}).

@item --preserve-dup-deps
Do not remove duplicate dependencies in libraries.  When building packages
with static libraries, the libraries may depend circularly on each other
(shared libs can too, but for those it doesn't matter), so there are
situations, where -la -lb -la is required, and the second -la may not be
stripped or the link will fail.  In cases where these duplications are
required, this option will preserve them, only stripping the libraries
that libtool knows it can safely.

@item --quiet
@itemx --silent
Do not print out any progress or informational messages.

@item -v
@itemx --verbose
Print out progress and informational messages (enabled by default).

@item --version
Print libtool version information and exit.
@end table

The @var{mode-args} are a variable number of arguments, depending on the
selected operation mode.  In general, each @var{mode-arg} is interpreted
by programs libtool invokes, rather than libtool itself.

@menu
* Compile mode::                Creating library object files.
* Link mode::                   Generating executables and libraries.
* Execute mode::                Debugging libtool-generated programs.
* Install mode::                Making libraries and executables public.
* Finish mode::                 Completing a library installation.
* Uninstall mode::              Removing installed executables and libraries.
* Clean mode::                  Removing uninstalled executables and libraries.
@end menu

@node Compile mode
@section Compile mode
@cindex mode, compile
@cindex compile mode

For @dfn{compile} mode, @var{mode-args} is a compiler command to be used
in creating a ``standard'' object file.  These arguments should begin with
the name of the C compiler, and contain the @option{-c} compiler flag so
that only an object file is created.

Libtool determines the name of the output file by removing the directory
component from the source file name, then substituting the source code
suffix (e.g.@: @samp{.c} for C source code) with the library object suffix,
@samp{.lo}.

If shared libraries are being built, any necessary PIC generation flags
are substituted into the compilation command.

The following components of @var{mode-args} are treated specially:

@table @option
@item -o
Note that the @option{-o} option is now fully supported.  It is emulated
on the platforms that don't support it (by locking and moving the
objects), so it is really easy to use libtool, just with minor
modifications to your Makefiles.  Typing for example
@example
libtool --mode=compile gcc -c foo/x.c -o foo/x.lo
@end example
will do what you expect.

Note, however, that, if the compiler does not support @option{-c} and
@option{-o}, it is impossible to compile @file{foo/x.c} without
overwriting an existing @file{./x.o}.  Therefore, if you do have a
source file @file{./x.c}, make sure you introduce dependencies in your
@file{Makefile} to make sure @file{./x.o} (or @file{./x.lo}) is
re-created after any sub-directory's @file{x.lo}:

@example
x.o x.lo: foo/x.lo bar/x.lo
@end example

@noindent
This will also ensure that make won't try to use a temporarily corrupted
@file{x.o} to create a program or library.  It may cause needless
recompilation on platforms that support @option{-c} and @option{-o}
together, but it's the only way to make it safe for those that don't.

@item -no-suppress
If both PIC and non-PIC objects are being built, libtool will normally
suppress the compiler output for the PIC object compilation to save
showing very similar, if not identical duplicate output for each
object.  If the @option{-no-suppress} option is given in compile mode,
libtool will show the compiler output for both objects.

@item -prefer-pic
Libtool will try to build only PIC objects.

@item -prefer-non-pic
Libtool will try to build only non-PIC objects.

@item -shared
Even if Libtool was configured with @option{--enable-static}, the object
file Libtool builds will not be suitable for static linking.  Libtool
will signal an error if it was configured with @option{--disable-shared},
or if the host does not support shared libraries.

@item -static
Even if libtool was configured with @option{--disable-static}, the
object file Libtool builds @strong{will} be suitable for static
linking.

@item -Wc,@var{flag}
@itemx -Xcompiler @var{flag}
Pass a linker specific flag directly to the compiler.

@item -Wl,@var{flag}
@itemx -Xlinker @var{flag}
Pass a linker specific flag directly to the linker.

@item -XCClinker @var{flag}
Pass a link specific flag to the compiler driver (@var{CC}) during linking.
@end table

@node Link mode
@section Link mode
@cindex link mode
@cindex mode, link

@dfn{Link} mode links together object files (including library
objects) to form another library or to create an executable program.

@var{mode-args} consist of a command using the C compiler to create an
output file (with the @option{-o} flag) from several object files.

The following components of @var{mode-args} are treated specially:

@table @option
@cindex undefined symbols, allowing
@cindex unresolved symbols, allowing
@item -all-static
If @var{output-file} is a program, then do not link it against any
shared libraries at all.  If @var{output-file} is a library, then only
create a static library.  In general, this flag cannot be used together
with @samp{disable-static} (@pxref{LT_INIT}).

@item -avoid-version
Tries to avoid versioning (@pxref{Versioning}) for libraries and modules,
i.e.@: no version information is stored and no symbolic links are created.
If the platform requires versioning, this option has no effect.

@item -dlopen @var{file}
Same as @option{-dlpreopen @var{file}}, if native dlopening is not
supported on the host platform (@pxref{Dlopened modules}) or if
the program is linked with @option{-static},
@option{-static-libtool-libs}, or @option{-all-static}.  Otherwise, no
effect.  If @var{file} is @code{self} Libtool will make sure that the
program can @code{dlopen} itself, either by enabling
@option{-export-dynamic} or by falling back to @option{-dlpreopen self}.

@item -dlpreopen @var{file}
Link @var{file} into the output program, and add its symbols to the
list of preloaded symbols (@pxref{Dlpreopening}).  If @var{file} is
@code{self}, the symbols of the program itself will be added to
preloaded symbol lists.  If @var{file} is @code{force} Libtool will
make sure that a preloaded symbol list is always @emph{defined},
regardless of whether it's empty or not.

@item -export-dynamic
Allow symbols from @var{output-file} to be resolved with @code{dlsym}
(@pxref{Dlopened modules}).

@item -export-symbols @var{symfile}
Tells the linker to export only the symbols listed in @var{symfile}.
The symbol file should end in @samp{.sym} and must contain the name of one
symbol per line.  This option has no effect on some platforms.
By default all symbols are exported.

@item -export-symbols-regex @var{regex}
Same as @option{-export-symbols}, except that only symbols matching
the regular expression @var{regex} are exported.
By default all symbols are exported.

@item -L@var{libdir}
Search @var{libdir} for required libraries that have already been
installed.

@item -l@var{name}
@var{output-file} requires the installed library @file{lib@var{name}}.
This option is required even when @var{output-file} is not an
executable.

@item -module
Creates a library that can be dlopened (@pxref{Dlopened modules}).
This option doesn't work for programs.
Module names don't need to be prefixed with @samp{lib}.
In order to prevent name clashes, however, @file{lib@var{name}} and @file{@var{name}}
must not be used at the same time in your package.

@item -no-fast-install
Disable fast-install mode for the executable @var{output-file}.  Useful
if the program won't be necessarily installed.

@item -no-install
Link an executable @var{output-file} that can't be installed and
therefore doesn't need a wrapper script on systems that allow hardcoding
of library paths.  Useful if the program is only used in the build tree,
e.g., for testing or generating other files.

@item -no-undefined
Declare that @var{output-file} does not depend on any other libraries.
Some platforms cannot create shared libraries that depend on other
libraries (@pxref{Inter-library dependencies}).

@item -o @var{output-file}
Create @var{output-file} from the specified objects and libraries.

@item -objectlist @var{file}
Use a list of object files found in @var{file} to specify objects.

@item -precious-files-regex @var{regex}
Prevents removal of files from the temporary output directory whose
names match this regular expression.  You might specify @samp{\.bbg?$}
to keep those files created with @code{gcc -ftest-coverage} for example.

@item -release @var{release}
Specify that the library was generated by release @var{release} of your
package, so that users can easily tell which versions are newer than
others.  Be warned that no two releases of your package will be binary
compatible if you use this flag.  If you want binary compatibility, use
the @option{-version-info} flag instead (@pxref{Versioning}).

@item -rpath @var{libdir}
If @var{output-file} is a library, it will eventually be installed in
@var{libdir}.  If @var{output-file} is a program, add @var{libdir} to
the run-time path of the program.

@item -R @var{libdir}
If @var{output-file} is a program, add @var{libdir} to its run-time
path.  If @var{output-file} is a library, add @option{-R@var{libdir}} to its
@var{dependency_libs}, so that, whenever the library is linked into a
program, @var{libdir} will be added to its run-time path.

@item -shared
If @var{output-file} is a program, then link it against any
uninstalled shared libtool libraries (this is the default behavior).
If @var{output-file} is a library, then only create a shared library.
In the later case, libtool will signal an error if it was configured
with @option{--disable-shared}, or if the host does not support shared
libraries.

@item -shrext @var{suffix}
If @var{output-file} is a libtool library, replace the system's standard
file name extension for shared libraries with @var{suffix} (most systems
use @file{.so} here).  This option is helpful in certain cases where an
application requires that shared libraries (typically modules) have an
extension other than the default one.  Please note you must supply the
full file name extension including any leading dot.

@item -static
If @var{output-file} is a program, then do not link it against any
uninstalled shared libtool libraries.  If @var{output-file} is a
library, then only create a static library.

@item -static-libtool-libs
If @var{output-file} is a program, then do not link it against any
shared libtool libraries.  If @var{output-file} is a library, then only
create a static library.

@item -version-info @var{current}[:@var{revision}[:@var{age}]]
If @var{output-file} is a libtool library, use interface version
information @var{current}, @var{revision}, and @var{age} to build it
(@pxref{Versioning}).  Do @strong{not} use this flag to specify package
release information, rather see the @option{-release} flag.

@item -version-number @var{major}[:@var{minor}[:@var{revision}]]
If @var{output-file} is a libtool library, compute interface version
information so that the resulting library uses the specified major, minor and
revision numbers.  This is designed to permit libtool to be used with
existing projects where identical version numbers are already used across
operating systems.  New projects should use the @option{-version-info} flag
instead.

@item -weak @var{libname}
if @var{output-file} is a libtool library, declare that it provides a
weak @var{libname} interface.  This is a hint to libtool that there is
no need to append @var{libname} to the list of dependency libraries of
@var{output-file}, because linking against @var{output-file} already
supplies the same interface (@pxref{Linking with dlopened modules}).

@item -Wl,@var{flag}
@itemx -Xlinker @var{flag}
Pass a linker specific flag directly to the linker.

@item -XCClinker @var{flag}
Pass a link specific flag to the compiler driver (@var{CC}) during linking.
@end table

If the @var{output-file} ends in @samp{.la}, then a libtool library is
created, which must be built only from library objects (@samp{.lo} files).
The @option{-rpath} option is required.  In the current implementation,
libtool libraries may not depend on other uninstalled libtool libraries
(@pxref{Inter-library dependencies}).

If the @var{output-file} ends in @samp{.a}, then a standard library is
created using @code{ar} and possibly @code{ranlib}.

@cindex partial linking
@cindex linking, partial
If @var{output-file} ends in @samp{.o} or @samp{.lo}, then a reloadable object
file is created from the input files (generally using @samp{ld -r}).
This method is often called @dfn{partial linking}.

Otherwise, an executable program is created.

@node Execute mode
@section Execute mode
@cindex execute mode
@cindex mode, execute

For @dfn{execute} mode, the library path is automatically set, then a
program is executed.

The first of the @var{mode-args} is treated as a program name, with the
rest as arguments to that program.

The following components of @var{mode-args} are treated specially:

@table @option
@item -dlopen @var{file}
Add the directory containing @var{file} to the library path.
@end table

This mode sets the library path environment variable according to any
@option{-dlopen} flags.

If any of the @var{args} are libtool executable wrappers, then they are
translated into the name of their corresponding uninstalled binary, and
any of their required library directories are added to the library path.

@node Install mode
@section Install mode
@cindex install mode
@cindex mode, install

In @dfn{install} mode, libtool interprets most of the elements of
@var{mode-args} as an installation command beginning with
@command{cp}, or a BSD-compatible @command{install} program.

The following components of @var{mode-args} are treated specially:

@table @option
@item -inst-prefix @var{inst-prefix-dir}
When installing into a temporary staging area, rather than the
final @var{prefix}, this argument is used to reflect the
temporary path, in much the same way @command{automake} uses
@var{DESTDIR}.  For instance, if @var{prefix} is @file{/usr/local},
but @var{inst-prefix-dir} is @file{/tmp}, then the object will be
installed under @file{/tmp/usr/local/}.  If the installed object
is a libtool library, then the internal fields of that library
will reflect only @var{prefix}, not @var{inst-prefix-dir}:

@example
# Directory that this library needs to be installed in:
libdir='/usr/local/lib'
@end example

not

@example
# Directory that this library needs to be installed in:
libdir='/tmp/usr/local/lib'
@end example

@code{inst-prefix} is also used to insure that if the installed
object must be relinked upon installation, that it is relinked
against the libraries in @var{inst-prefix-dir}/@var{prefix},
not @var{prefix}.

In truth, this option is not really intended for use when calling
libtool directly; it is automatically used when @code{libtool --mode=install}
calls @code{libtool --mode=relink}.  Libtool does this by
analyzing the destination path given in the original
@code{libtool --mode=install} command and comparing it to the
expected installation path established during @code{libtool --mode=link}.

Thus, end-users need change nothing, and @command{automake}-style
@code{make install DESTDIR=/tmp} will Just Work(tm) most of the time.
For systems where fast installation can not be turned on, relinking
may be needed.  In this case, a @samp{DESTDIR} install will fail.

Currently it is not generally possible to install into a temporary
staging area that contains needed third-party libraries which are
not yet visible at their final location.
@end table

The rest of the @var{mode-args} are interpreted as arguments to the
@command{cp} or @command{install} command.

The command is run, and any necessary unprivileged post-installation
commands are also completed.

@node Finish mode
@section Finish mode
@cindex finish mode
@cindex mode, finish

@dfn{Finish} mode helps system administrators install libtool libraries
so that they can be located and linked into user programs.

Each @var{mode-arg} is interpreted as the name of a library directory.
Running this command may require superuser privileges, so the
@option{--dry-run} option may be useful.

@node Uninstall mode
@section Uninstall mode
@cindex uninstall mode
@cindex mode, uninstall

@dfn{Uninstall} mode deletes installed libraries, executables and objects.

The first @var{mode-arg} is the name of the program to use to delete
files (typically @command{/bin/rm}).

The remaining @var{mode-args} are either flags for the deletion program
(beginning with a @samp{-}), or the names of files to delete.

@node Clean mode
@section Clean mode
@cindex clean mode
@cindex mode, clean

@dfn{Clean} mode deletes uninstalled libraries, executables, objects
and libtool's temporary files associated with them.

The first @var{mode-arg} is the name of the program to use to delete
files (typically @command{/bin/rm}).

The remaining @var{mode-args} are either flags for the deletion program
(beginning with a @samp{-}), or the names of files to delete.

@node Integrating libtool
@chapter Integrating libtool with your package

This chapter describes how to integrate libtool with your packages so
that your users can install hassle-free shared libraries.

@menu
* Autoconf macros::             Autoconf macros exported by libtool.
* Makefile rules::              Writing @file{Makefile} rules for libtool.
* Using Automake::              Automatically supporting libtool.
* Configuring::                 Configuring libtool for a host system.
* Distributing::                What files to distribute with your package.
* Static-only libraries::       Sometimes shared libraries are just a pain.
@end menu

@node Autoconf macros
@section Autoconf macros exported by libtool

Libtool uses a number of macros to interrogate the host system when it
is being built, and you can use some of them yourself too.  Although
there are a great many other macros in the libtool installed m4 files,
these do not form part of the published interface, and are subject to
change between releases.

@noindent
Macros in the @samp{LT_CMD_} namespace check for various shell
commands:

@defmac LT_CMD_MAX_LEN
Finds the longest command line that can be safely passed to
@samp{$SHELL} without being truncated, and store in the shell variable
@samp{$max_cmd_len}.  It is only an approximate value, but command
lines of this length or shorter are guaranteed not to be truncated.
@end defmac

@noindent
Macros in the @samp{LT_FUNC_} namespace check characteristics of
library functions:

@defmac LT_FUNC_DLSYM_USCORE
@samp{AC_DEFINE} the preprocessor symbol @samp{DLSYM_USCORE} if we
have to add an underscore to symbol-names passed in to @samp{dlsym}.
@end defmac

@noindent
Macros in the @samp{LT_LIB_} namespace check characteristics of system
libraries:

@defmac LT_LIB_M
Set @samp{LIBM} to the math library or libraries required on this
machine, if any.
@end defmac

@defmac LT_LIB_DLLOAD
This is the macro used by @samp{libltdl} to determine which dlloaders
to use on this machine, if any.  Several shell variables are set (and
@samp{AC_SUBST}ed) depending on the dlload interfaces are available on
this machine.  @samp{LT_DLLOADERS} contains a list of libtool
libraries that can be used, and if necessary also sets
@samp{LIBADD_DLOPEN} if additional system libraries are required by
the @samp{dlopen} loader, and @samp{LIBADD_SHL_LOAD} if additional
system libraries are required by the @samp{shl_load} loader,
respectively.  Finally some symbols are set in @file{config.h}
depending on the loaders that are found to work: @samp{HAVE_LIBDL},
@samp{HAVE_SHL_LOAD}, @samp{HAVE_DYLD}, @samp{HAVE_DLD}.
@end defmac

@noindent
Macros in the @samp{LT_PATH_} namespace search the system for the full
path to particular system commands:

@defmac LT_PATH_LD
Add a @option{--with-gnu-ld} option to @file{configure}.  Try to find
the path to the linker used by @samp{$CC}, and whether it is the
@sc{gnu} linker.  The result is stored in the shell variable
@samp{$LD}, which is @code{AC_SUBST}ed.
@end defmac

@defmac LT_PATH_NM
Try to find a @sc{bsd} compatible @command{nm} or a @sc{ms} compatible
@command{dumpbin} command on this machine.  The result is stored in the
shell variable @samp{$NM}, which is @code{AC_SUBST}ed.
@end defmac

@noindent
Macros in the @samp{LT_SYS_} namespace probe for system
characteristics:

@defmac LT_SYS_DLOPEN_SELF
Tests whether a program can dlopen itself, and then also whether the
same program can still dlopen itself when statically linked.  Results
are stored in the shell variables @samp{$enable_dlopen_self} and
@samp{enable_dlopen_self_static} respectively.
@end defmac

@defmac LT_SYS_DLOPEN_DEPLIBS
Define the preprocessor symbol @samp{LTDL_DLOPEN_DEPLIBS} if the
@sc{os} needs help to load dependent libraries for @samp{dlopen} (or
equivalent).
@end defmac

@defmac LT_SYS_DLSEARCH_PATH
Define the preprocessor symbol @samp{LT_DLSEARCH_PATH} to the system
default library search path.
@end defmac

@defmac LT_SYS_MODULE_EXT
Define the preprocessor symbol @samp{LT_MODULE_EXT} to the extension
used for runtime loadable modules.  If you use libltdl to open
modules, then you can simply use the libtool library extension,
@samp{.la}.
@end defmac

@defmac LT_SYS_MODULE_PATH
Define the preprocessor symbol @samp{LT_MODULE_PATH_VAR} to the name
of the shell environment variable that determines the run-time module
search path.
@end defmac

@defmac LT_SYS_SYMBOL_USCORE
Set the shell variable @samp{sys_symbol_underscore} to @samp{no}
unless the compiler prefixes global symbols with an underscore.
@end defmac


@node Makefile rules
@section Writing @file{Makefile} rules for libtool
@cindex Makefile
@cindex Makefile.am
@cindex Makefile.in

Libtool is fully integrated with Automake (@pxref{Top,, Introduction,
automake, The Automake Manual}), starting with Automake version 1.2.

If you want to use libtool in a regular @file{Makefile} (or
@file{Makefile.in}), you are on your own.  If you're not using
Automake, and you don't know how to incorporate libtool into your
package you need to do one of the following:

@enumerate 1
@item
Download the latest Automake distribution from your nearest @sc{gnu}
mirror, install it, and start using it.

@item
Learn how to write @file{Makefile} rules by hand.  They're sometimes complex,
but if you're clever enough to write rules for compiling your old
libraries, then you should be able to figure out new rules for libtool
libraries (hint: examine the @file{Makefile.in} in the @file{tests/demo}
subdirectory of the libtool distribution@dots{} note especially that it
was automatically generated from the @file{Makefile.am} by Automake).
@end enumerate

@node Using Automake
@section Using Automake with libtool

@vindex LTLIBRARIES
Libtool library support is implemented under the @samp{LTLIBRARIES}
primary.

Here are some samples from the Automake @file{Makefile.am} in the
libtool distribution's @file{demo} subdirectory.

First, to link a program against a libtool library, just use the
@samp{program_LDADD}@footnote{@c
@c
Since @sc{gnu} Automake 1.5, the flags @option{-dlopen}
or @option{-dlpreopen} (@pxref{Link mode}) can be employed with the
@var{program_LDADD} variable.  Unfortunately, older releases didn't
accept these flags, so if you are stuck with an ancient Automake, we
recommend quoting the flag itself, and setting
@var{program_DEPENDENCIES} too:

@example
program_LDADD = "-dlopen" libfoo.la
program_DEPENDENCIES = libfoo.la
@end example
@c
} variable:

@example
bin_PROGRAMS = hell hell_static

# Build hell from main.c and libhello.la
hell_SOURCES = main.c
hell_LDADD = libhello.la

# Create a statically linked version of hell.
hell_static_SOURCES = main.c
hell_static_LDADD = libhello.la
hell_static_LDFLAGS = -static
@end example

You may use the @samp{program_LDFLAGS} variable to stuff in any flags
you want to pass to libtool while linking @samp{program} (such as
@option{-static} to avoid linking uninstalled shared libtool libraries).

Building a libtool library is almost as trivial@dots{} note the use of
@samp{libhello_la_LDFLAGS} to pass the @option{-version-info}
(@pxref{Versioning}) option to libtool:

@example
# Build a libtool library, libhello.la for installation in libdir.
lib_LTLIBRARIES = libhello.la
libhello_la_SOURCES = hello.c foo.c
libhello_la_LDFLAGS = -version-info 3:12:1
@end example

The @option{-rpath} option is passed automatically by Automake (except for
libraries listed as @code{noinst_LTLIBRARIES}), so you
should not specify it.

@xref{A Shared Library, Building a Shared Library, The Automake Manual,
automake, The Automake Manual}, for more information.

@node Configuring
@section Configuring libtool
@cindex configuring libtool

Libtool requires intimate knowledge of your compiler suite and operating
system in order to be able to create shared libraries and link against
them properly.  When you install the libtool distribution, a
system-specific libtool script is installed into your binary directory.

However, when you distribute libtool with your own packages
(@pxref{Distributing}), you do not always know the compiler suite and
operating system that are used to compile your package.

For this reason, libtool must be @dfn{configured} before it can be
used.  This idea should be familiar to anybody who has used a @sc{gnu}
@code{configure} script.  @code{configure} runs a number of tests for
system features, then generates the @file{Makefile}s (and possibly a
@file{config.h} header file), after which you can run @code{make} and
build the package.

Libtool adds its own tests to your @code{configure} script in order to
generate a libtool script for the installer's host machine.

@menu
* LT_INIT::                     Configuring @code{libtool} in @file{configure.ac}.
* Configure notes::             Platform-specific notes for configuration.
@end menu

@node LT_INIT
@subsection The @code{LT_INIT} macro

If you are using @sc{gnu} Autoconf (or Automake), you should add a call to
@code{LT_INIT} to your @file{configure.ac} file.  This macro
adds many new tests to the @code{configure} script so that the generated
libtool script will understand the characteristics of the host.  It's the
most important of a number of macros defined by Libtool:

@defmac LT_PREREQ (@var{VERSION})
Ensure that a recent enough version of Libtool is being used.  If the
version of Libtool used for @code{LT_INIT} is earlier than
@var{version}, print an error message to the standard
error output and exit with failure (exit status is 63).  For example:

@example
LT_PREREQ([@value{VERSION}])
@end example
@end defmac

@defmac LT_INIT (@var{OPTIONS})
@defmacx AC_PROG_LIBTOOL
@defmacx AM_PROG_LIBTOOL
Add support for the @option{--enable-shared} and @option{--disable-shared}
@code{configure} flags.@footnote{@code{LT_INIT} requires that
you define the @file{Makefile} variable @code{top_builddir} in your
@file{Makefile.in}.  Automake does this automatically, but Autoconf
users should set it to the relative path to the top of your build
directory (@file{../..}, for example).}  @code{AC_PROG_LIBTOOL} and
@code{AM_PROG_LIBTOOL} are deprecated names for older versions of this macro;
@code{autoupdate} will upgrade your @file{configure.ac} files.

By default, this macro turns on shared libraries if they are available,
and also enables static libraries if they don't conflict with the shared
libraries.  You can modify these defaults by passing either
@code{disable-shared} or @code{disable-static} in the option list to
@code{LT_INIT}, or using @code{AC_DISABLE_SHARED} or @code{AC_DISABLE_STATIC}.

@example
# Turn off shared libraries during beta-testing, since they
# make the build process take too long.
LT_INIT([disable-shared])
@end example

The user may specify modified forms of the configure flags
@option{--enable-shared} and @option{--enable-static} to choose whether
shared or static libraries are built based on the name of the package.
For example, to have shared @samp{bfd} and @samp{gdb} libraries built,
but not shared @samp{libg++}, you can run all three @code{configure}
scripts as follows:

@example
trick$ ./configure --enable-shared=bfd,gdb
@end example

In general, specifying @option{--enable-shared=@var{pkgs}} is the same as
configuring with @option{--enable-shared} every package named in the
comma-separated @var{pkgs} list, and every other package with
@option{--disable-shared}.  The @option{--enable-static=@var{pkgs}} flag
behaves similarly, but it uses @option{--enable-static} and
@option{--disable-static}.  The same applies to the
@option{--enable-fast-install=@var{pkgs}} flag, which uses
@option{--enable-fast-install} and @option{--disable-fast-install}.

The package name @samp{default} matches any packages that have not set
their name in the @code{PACKAGE} environment variable.

This macro also sets the shell variable @var{LIBTOOL_DEPS}, that you can
use to automatically update the libtool script if it becomes
out-of-date.  In order to do that, add to your @file{configure.ac}:

@example
LT_INIT
AC_SUBST([LIBTOOL_DEPS])
@end example

and, to @file{Makefile.in} or @file{Makefile.am}:

@example
LIBTOOL_DEPS = @@LIBTOOL_DEPS@@
libtool: $(LIBTOOL_DEPS)
        $(SHELL) ./config.status --recheck
@end example

If you are using @sc{gnu} Automake, you can omit the assignment, as Automake
will take care of it.  You'll obviously have to create some dependency
on @file{libtool}.

Aside from @code{disable-static} and @code{disable-shared}, there are
other options that you can pass to @code{LT_INIT} to modify its
behaviour.  Here is a full list:

@table @samp
@item dlopen
Enable checking for dlopen support.  This option should be used if
the package makes use of the @option{-dlopen} and @option{-dlpreopen}
libtool flags, otherwise libtool will assume that the system does not
support dlopening.

@item win32-dll
This option should be used if the package has been ported to build clean
dlls on win32 platforms.  Usually this means that any library data items
are exported with @code{__declspec(dllexport)} and imported with
@code{__declspec(dllimport)}.  If this macro is not used, libtool will
assume that the package libraries are not dll clean and will build only
static libraries on win32 hosts.

Provision must be made to pass @option{-no-undefined} to @code{libtool}
in link mode from the package @code{Makefile}.  Naturally, if you pass
@option{-no-undefined}, you must ensure that all the library symbols
@strong{really are} defined at link time!

@item disable-fast-install
Change the default behaviour for @code{LT_INIT} to disable
optimization for fast installation.  The user may still override this
default, depending on platform support, by specifying
@option{--enable-fast-install} to @command{configure}.

@item shared
Change the default behaviour for @code{LT_INIT} to enable
shared libraries.  This is the default on all systems where
Libtool knows how to create shared libraries.
The user may still override this default by specifying
@option{--disable-shared} to @command{configure}.

@item disable-shared
Change the default behaviour for @code{LT_INIT} to disable
shared libraries.  The user may still override this default by
specifying @option{--enable-shared} to @command{configure}.

@item static
Change the default behaviour for @code{LT_INIT} to enable
static libraries.  This is the default on all systems where
shared libraries have been disabled for some reason, and on
most systems where shared libraries have been enabled.
If shared libraries are enabled, the user may still override
this default by specifying @option{--disable-static} to
@command{configure}.

@item disable-static
Change the default behaviour for @code{LT_INIT} to disable
static libraries.  The user may still override this default by
specifying @option{--enable-static} to @command{configure}.

@item pic-only
Change the default behaviour for @command{libtool} to try to use only
@sc{pic} objects.  The user may still override this default by specifying
@option{--without-pic} to @command{configure}.

@item no-pic
Change the default behaviour of @command{libtool} to try to use only
non-@sc{pic} objects.  The user may still override this default by
specifying @option{--with-pic} to @command{configure}.

@end table

@end defmac

@defmac LT_LANG (@var{LANGUAGE})
Enable @command{libtool} support for the language given if it
has not yet already been enabled.  Languages accepted are ``C++'',
``Fortran 77'', ``Java'' and ``Windows Resource''.

If Autoconf language support macros such as @code{AC_PROG_CXX} are
used in your @file{configure.ac}, Libtool language support will automatically
be enabled.

Conversely using @code{LT_LANG} to enable language support for Libtool
will automatically enable Autoconf language support as well.

Both of the following examples are therefore valid ways of adding C++
language support to Libtool.

@example
LT_INIT
LT_LANG([C++])
@end example

@example
LT_INIT
AC_PROG_CXX
@end example

@end defmac

@defmac AC_LIBTOOL_DLOPEN
This macro is deprecated, the @samp{dlopen} option to @code{LT_INIT} should be
used instead.
@end defmac

@defmac AC_LIBTOOL_WIN32_DLL
This macro is deprecated, the @samp{win32-dll} option to @code{LT_INIT} should
be used instead.
@end defmac

@defmac AC_DISABLE_FAST_INSTALL
This macro is deprecated, the @samp{disable-fast-install} option to @code{LT_INIT}
should be used instead.
@end defmac

@defmac AC_DISABLE_SHARED
@defmacx AM_DISABLE_SHARED
Change the default behaviour for @code{LT_INIT} to disable shared libraries.
The user may still override this default by specifying @samp{--enable-shared}.
The option @samp{disable-shared} to @code{LT_INIT} is a shorthand for this.
@code{AM_DISABLE_SHARED} is a deprecated alias for @code{AC_DISABLE_SHARED}.
@end defmac

@defmac AC_ENABLE_SHARED
@defmacx AM_ENABLE_SHARED
Change the default behaviour for @code{LT_INIT} to enable shared libraries.
This is the default on all systems where Libtool knows how to create
shared libraries.  The user may still override this default by specifying
@samp{--disable-shared}.  The option @samp{shared} to @code{LT_INIT} is a
shorthand for this.
@code{AM_ENABLE_SHARED} is a deprecated alias for @code{AC_ENABLE_SHARED}.
@end defmac

@defmac AC_DISABLE_STATIC
@defmacx AM_DISABLE_STATIC
Change the default behaviour for @code{LT_INIT} to disable static libraries.
The user may still override this default by specifying @samp{--enable-static}.
The option @samp{disable-static} to @code{LT_INIT} is a shorthand for this.
@code{AM_DISABLE_STATIC} is a deprecated alias for @code{AC_DISABLE_STATIC}.
@end defmac

@defmac AC_ENABLE_STATIC
@defmacx AM_ENABLE_STATIC
Change the default behaviour for @code{LT_INIT} to enable static libraries.
This is the default on all systems where shared libraries have been disabled
for some reason, and on most systems where shared libraries have been enabled.
If shared libraries are enabled, the user may still override this default by
specifying @samp{--disable-static}.  The option @samp{static} to @code{LT_INIT}
is a shorthand for this.
@code{AM_ENABLE_STATIC} is a deprecated alias for @code{AC_ENABLE_STATIC}.
@end defmac

The tests in @code{LT_INIT} also recognize the following
environment variables:

@defvar CC
The C compiler that will be used by the generated @code{libtool}.  If
this is not set, @code{LT_INIT} will look for @command{gcc} or
@command{cc}.
@end defvar

@defvar CFLAGS
Compiler flags used to generate standard object files.  If this is not
set, @code{LT_INIT} will not use any such flags.  It affects
only the way @code{LT_INIT} runs tests, not the produced
@code{libtool}.
@end defvar

@defvar CPPFLAGS
C preprocessor flags.  If this is not set, @code{LT_INIT} will
not use any such flags.  It affects only the way @code{LT_INIT}
runs tests, not the produced @code{libtool}.
@end defvar

@defvar LD
The system linker to use (if the generated @code{libtool} requires one).
If this is not set, @code{LT_INIT} will try to find out what is
the linker used by @var{CC}.
@end defvar

@defvar LDFLAGS
The flags to be used by @code{libtool} when it links a program.  If
this is not set, @code{LT_INIT} will not use any such flags.  It
affects only the way @code{LT_INIT} runs tests, not the produced
@code{libtool}.
@end defvar

@defvar LIBS
The libraries to be used by @code{LT_INIT} when it links a
program.  If this is not set, @code{LT_INIT} will not use any
such flags.  It affects only the way @code{LT_INIT} runs tests,
not the produced @code{libtool}.
@end defvar

@defvar NM
Program to use rather than checking for @command{nm}.
@end defvar

@defvar RANLIB
Program to use rather than checking for @command{ranlib}.
@end defvar

@defvar LN_S
A command that creates a link of a program, a soft-link if possible, a
hard-link otherwise.  @code{LT_INIT} will check for a suitable
program if this variable is not set.
@end defvar

@defvar DLLTOOL
Program to use rather than checking for @command{dlltool}.  Only meaningful
for Cygwin/MS-Windows.
@end defvar

@defvar OBJDUMP
Program to use rather than checking for @command{objdump}.  Only meaningful
for Cygwin/MS-Windows.
@end defvar

@defvar AS
Program to use rather than checking for @command{as}.  Only used on
Cygwin/MS-Windows at the moment.
@end defvar

With 1.3 era libtool, if you wanted to know any details of what
libtool had discovered about your architecture and environment, you
had to run the script with @option{--config} and grep through the
results.  This idiom was supported up to and including 1.5.x era
libtool, where it was possible to call the generated libtool script
from @file{configure.ac} as soon as @code{LT_INIT} had
completed.  However, one of the features of libtool 1.4 was that the
libtool configuration was migrated out of a separate @file{ltconfig}
file, and added to the @code{LT_INIT} macro (nee @code{AC_PROG_LIBTOOL}),
so the results of the configuration tests were available directly to code in
@file{configure.ac}, rendering the call out to the generated libtool
script obsolete.

Starting with libtool 2.0, the multipass generation of the libtool
script has been consolidated into a single @file{config.status} pass,
which happens after all the code in @file{configure.ac} has
completed.  The implication of this is that the libtool script does
not exist during execution of code from @file{configure.ac}, and so
obviously it cannot be called for @option{--config} details anymore.  If
you are upgrading projects that used this idiom to libtool 2.0 or
newer, you should replace those calls with direct references to the
equivalent Autoconf shell variables that are set by the configure time
tests before being passed to @file{config.status} for inclusion in the
generated libtool script.

@defmac LT_OUTPUT
By default, the configured @file{libtool} script is generated by the
call to @code{AC_OUTPUT} command, and there is rarely any need to use
@file{libtool} from @file{configure}.  However, sometimes it is
necessary to run configure time compile and link tests using
@file{libtool}.  You can add @code{LT_OUTPUT} to your
@file{configure.ac} any time after @code{LT_INIT} and any
@code{LT_LANG} calls; that done, @file{libtool} will be created by a
specially generated @file{config.lt} file, and available for use in
later tests.

Also, when @code{LT_OUTPUT} is used, for backwards compatibility with
Automake regeneration rules, @file{config.status} will call
@file{config.lt} to regenerate @file{libtool}, rather than generating
the file itself.
@end defmac

@pindex aclocal
When you invoke the @command{libtoolize} program (@pxref{Invoking
libtoolize}), it will tell you where to find a definition of
@code{LT_INIT}.  If you use Automake, the @command{aclocal} program
will automatically add @code{LT_INIT} support to your
@file{configure} script when it sees the invocation of @code{LT_INIT}
in @file{configure.ac}.

Because of these changes, and the runtime version compatibility checks
Libtool now executes, we now advise @strong{against} including a copy of
@file{libtool.m4} (and brethren) in @file{acinclude.m4}.  Instead,
you should set your project macro directory with
@code{AC_CONFIG_MACRO_DIR}.  When you @command{libtoolize} your
project, a copy of the relevant macro definitions will be placed in
your @code{AC_CONFIG_MACRO_DIR}, where @command{aclocal} can reference
them directly from @file{aclocal.m4}.


@node Configure notes
@subsection Platform-specific configuration notes

While Libtool tries to hide as many platform-specific features as possible,
some have to be taken into account when configuring either the Libtool package
or a libtoolized package.

@include notes.texi


@node Distributing
@section Including libtool in your package

In order to use libtool, you need to include the following files with
your package:

@table @file
@item config.guess
@pindex config.guess
Attempt to guess a canonical system name.

@item config.sub
@pindex config.sub
Canonical system name validation subroutine script.

@item install-sh
@pindex install-sh
BSD-compatible @command{install} replacement script.

@item ltmain.sh
@pindex ltmain.sh
A generic script implementing basic libtool functionality.
@end table

Note that the libtool script itself should @emph{not} be included with
your package.  @xref{Configuring}.

You should use the @command{libtoolize} program, rather than manually
copying these files into your package.

@menu
* Invoking libtoolize::         @code{libtoolize} command line options.
* Autoconf and LTLIBOBJS::      Autoconf automates LTLIBOBJS generation.
@end menu

@node Invoking libtoolize
@subsection Invoking @command{libtoolize}
@pindex libtoolize
@cindex libtoolize command options
@cindex command options, libtoolize
@cindex options, libtoolize command

The @command{libtoolize} program provides a standard way to add libtool
support to your package.  In the future, it may implement better usage
checking, or other features to make libtool even easier to use.

The @command{libtoolize} program has the following synopsis:

@example
libtoolize [@var{option}]@dots{}
@end example

@noindent
and accepts the following options:

@table @option

@item --copy
@itemx -c
Copy files from the libtool data directory rather than creating
symlinks.

@item --debug
Dump a trace of shell script execution to standard output.  This
produces a lot of output, so you may wish to pipe it to @command{less} (or
@command{more}) or redirect to a file.

@item --dry-run
@itemx -n
Don't run any commands that modify the file system, just print them
out.

@item --force
@itemx -f
Replace existing libtool files.  By default, @command{libtoolize} won't
overwrite existing files.

@item --help
Display a help message and exit.

@item --ltdl [@var{TARGET-DIRECTORY-NAME}]
Install libltdl in the @var{TARGET-DIRECTORY-NAME} subdirectory of
your package.  Normally, the directory is extracted from the argument
to @code{LT_CONFIG_LTDL_DIR} in @file{configure.ac}, though you can
also specify a subdirectory name here if you are not using Autoconf
for example.  If @command{libtoolize} can't determine the target
directory, @samp{libltdl} is used as the default.

@item --no-warn
Normally, Libtoolize tries to diagnose use of deprecated libtool macros
and other stylistic issues.  If you are deliberately using outdated
calling conventions, this option prevents Libtoolize from explaining
how to update your project's Libtool conventions.

@item --nonrecursive
If passed in conjunction with @option{--ltdl}, this option will cause
the @command{libltdl} installed by @samp{libtoolize} to be set up for
use with a non-recursive @command{automake} build.  To make use of it,
you will need to add the following to the @file{Makefile.am} of the
parent project:

@example
## libltdl/Makefile.inc @r{appends to the following variables}
## @r{so we set them here before including it:}
BUILT_SOURCES   =

AM_CPPFLAGS        =
AM_LDFLAGS         =

include_HEADERS    =
noinst_LTLIBRARIES =
lib_LTLIBRARIES   =
EXTRA_LTLIBRARIES  =

EXTRA_DIST   =

CLEANFILES   =
MOSTLYCLEANFILES   =

include libltdl/Makefile.inc
@end example

@noindent

@item --quiet
@itemx -q
Work silently.  @samp{libtoolize --quiet} is used by @sc{gnu} Automake
to add libtool files to your package if necessary.

@item --recursive
If passed in conjunction with @option{--ltdl}, this option will cause
the @command{libtoolize} installed @samp{libltdl} to be set up for use
with a recursive @command{automake} build.  To make use of it, you
will need to adjust the parent project's @file{configure.ac}:

@example
AC_CONFIG_FILES([libltdl/Makefile])
@end example

@noindent
and @file{Makefile.am}:

@example
SUBDIRS += libltdl
@end example

@item --subproject
If passed in conjunction with @option{--ltdl}, this option will cause
the @command{libtoolize} installed @samp{libltdl} to be set up for
independent configuration and compilation as a self-contained
subproject.  To make use of it, you should arrange for your build to
call @command{libltdl/configure}, and then run @command{make} in the
@file{libltdl} directory (or the subdirectory you put libltdl into).
If your project uses Autoconf, you can use the supplied
@samp{LT_WITH_LTDL} macro, or else call @samp{AC_CONFIG_SUBDIRS}
directly.

Previous releases of @samp{libltdl} built exclusively in this mode,
but now it is the default mode both for backwards compatibility and
because, for example, it is suitable for use in projects that wish to
use @samp{libltdl}, but not use the Autotools for their own build
process.

@item --verbose
@itemx -v
Work noisily!  Give a blow by blow account of what
@command{libtoolize} is doing.

@item --version
Print @command{libtoolize} version information and exit.
@end table

@cindex LIBTOOLIZE_OPTIONS
Sometimes it can be useful to pass options to @command{libtoolize} even
though it is called by another program, such as @command{autoreconf}.  A
limited number of options are parsed from the environment variable
@code{LIBTOOLIZE_OPTIONS}: currently @option{--debug}, @option{--no-warn},
@option{--quiet} and @option{--verbose}.  Multiple options passed in
@code{LIBTOOLIZE_OPTIONS} must be separated with a space, comma or a
colon.

By default, a warning is issued for unknown options found in
@code{LIBTOOLIZE_OPTIONS} unless the first such option is
@option{--no-warn}.  Where @command{libtoolize} has always quit
on receipt of an unknown option at the command line, this and all
previous releases of @command{libtoolize} will continue unabated whatever
the content of @code{LIBTOOLIZE_OPTIONS} (modulo some possible warning
messages).

@example
trick$ @kbd{LIBTOOLIZE_OPTIONS=--no-warn,--quiet autoreconf --install}
@end example

@findex AC_CONFIG_MACRO_DIR
If @command{libtoolize} detects an explicit call to
@code{AC_CONFIG_MACRO_DIR} (@pxref{Input, , The Autoconf Manual,
autoconf, The Autoconf Manual}) in your @file{configure.ac}, it will
put the Libtool macros in the specified directory.

In the future other Autotools will automatically check the contents of
@code{AC_CONFIG_MACRO_DIR}, but at the moment it is more portable to
add the macro directory to @code{ACLOCAL_AMFLAGS} in
@file{Makefile.am}, which is where the tools currently look.  If
@command{libtoolize} doesn't see @code{AC_CONFIG_MACRO_DIR}, it too
will honour the first @samp{-I} argument in @code{ACLOCAL_AMFLAGS}
when choosing a directory to store libtool configuration macros in.
It is perfectly sensible to use both @code{AC_CONFIG_MACRO_DIR} and
@code{ACLOCAL_AMFLAGS}, as long as they are kept in synchronisation.

@example
ACLOCAL_AMFLAGS = -I m4
@end example

When you bootstrap your project with @command{aclocal}, then you will
need to explicitly pass the same macro directory with
@command{aclocal}'s @samp{-I} flag:

@example
trick$ @kbd{aclocal -I m4}
@end example

@findex AC_CONFIG_AUX_DIR
If @command{libtoolize} detects an explicit call to
@code{AC_CONFIG_AUX_DIR} (@pxref{Input, , The Autoconf Manual,
autoconf, The Autoconf Manual}) in your @file{configure.ac}, it
will put the other support files in the specified directory.
Otherwise they too end up in the project root directory.

Unless @option{--no-warn} is passed, @command{libtoolize} displays
hints for adding libtool support to your package, as well.

@node Autoconf and LTLIBOBJS
@subsection Autoconf and @code{LTLIBOBJS}

People used to add code like the following to their
@file{configure.ac}:

@cindex LTLIBOBJS
@example
LTLIBOBJS=`echo "$LIBOBJS" | sed 's/\.[^.]* /.lo /g;s/\.[^.]*$/.lo/'`
AC_SUBST([LTLIBOBJS])
@end example

@noindent
This is no longer required (since Autoconf 2.54), and doesn't take
Automake's deansification support into account either, so doesn't work
correctly even with ancient Autoconfs!

Provided you are using a recent (2.54 or better) incarnation of
Autoconf, the call to @code{AC_OUTPUT} takes care of setting
@code{LTLIBOBJS} up correctly, so you can simply delete such snippets
from your @file{configure.ac} if you had them.


@node Static-only libraries
@section Static-only libraries
@cindex debugging libraries
@cindex developing libraries
@cindex double-compilation, avoiding
@cindex avoiding shared libraries
@cindex eliding shared libraries
@cindex using shared libraries, not
@cindex shared libraries, not using
@cindex time, saving
@cindex saving time

When you are developing a package, it is often worthwhile to configure
your package with the @option{--disable-shared} flag, or to override the
defaults for @code{LT_INIT} by using the @code{disable-shared} option
(@pxref{LT_INIT, , The @code{LT_INIT} macro}).  This prevents libtool
from building shared libraries, which has several advantages:

@itemize @bullet
@item
compilation is twice as fast, which can speed up your development cycle,

@item
debugging is easier because you don't need to deal with any complexities
added by shared libraries, and

@item
you can see how libtool behaves on static-only platforms.
@end itemize

You may want to put a small note in your package @file{README} to let
other developers know that @option{--disable-shared} can save them time.
The following example note is taken from the GIMP@footnote{@sc{gnu} Image
Manipulation Program, for those who haven't taken the plunge.  See
@url{http://www.gimp.org/}.} distribution @file{README}:

@example
The GIMP uses @sc{gnu} Libtool in order to build shared libraries on a
variety of systems.  While this is very nice for making usable
binaries, it can be a pain when trying to debug a program.  For that
reason, compilation of shared libraries can be turned off by
specifying the @option{--disable-shared} option to @file{configure}.
@end example


@node Other languages
@chapter Using libtool with other languages
@cindex C, not using
@cindex languages, non-C
@cindex C++, using

Libtool was first implemented in order to add support for writing shared
libraries in the C language.  However, over time, libtool is being
integrated with other languages, so that programmers are free to reap
the benefits of shared libraries in their favorite programming language.

This chapter describes how libtool interacts with other languages,
and what special considerations you need to make if you do not use C.

@menu
* C++ libraries::               Writing libraries for C++
* Tags::                        Tags
@end menu

@node C++ libraries
@section Writing libraries for C++
@c FIXME: in the TOC, the ++ is too large (seems to be math mode)
@cindex trouble with C++
@cindex pitfalls using C++
@cindex C++, pitfalls

Creating libraries of C++ code should be a fairly straightforward
process, because its object files differ from C ones in only three ways:

@enumerate 1
@item
Because of name mangling, C++ libraries are only usable by the C++
compiler that created them.  This decision was made by the designers of
C++ in order to protect users from conflicting implementations of
features such as constructors, exception handling, and RTTI.

@item
On some systems, the C++ compiler must take special actions for the
dynamic linker to run dynamic (i.e., run-time) initializers.  This means
that we should not call @command{ld} directly to link such libraries, and
we should use the C++ compiler instead.

@item
C++ compilers will link some Standard C++ library in by default, but
libtool does not know which are these libraries, so it cannot even run
the inter-library dependence analyzer to check how to link it in.
Therefore, running @command{ld} to link a C++ program or library is deemed
to fail.
@end enumerate

Because of these three issues, Libtool has been designed to always use
the C++ compiler to compile and link C++ programs and libraries.  In
some instances the @code{main()} function of a program must also be
compiled with the C++ compiler for static C++ objects to be properly
initialized.

@node Tags
@section Tags
@cindex tag names
@cindex language names
@cindex inferring tags

Libtool supports multiple languages through the use of tags.  Technically
a tag corresponds to a set of configuration variables associated with a
language.  These variables tell @command{libtool} how it should create
objects and libraries for each language.

Tags are defined at @command{configure}-time for each language activated
in the package (see @code{LT_LANG} in @ref{LT_INIT}).  Here is the
correspondence between language names and tags names.

@multitable {Windows Resource} {Tag name}
@item Language name    @tab Tag name
@item C                @tab CC
@item C++              @tab CXX
@item Java             @tab GCJ
@item Fortran 77       @tab F77
@item Fortran          @tab FC
@item Windows Resource @tab RC
@end multitable

@command{libtool} tries to automatically infer which tag to use from
the compiler command being used to compile or link.  If it can't infer
a tag, then it defaults to the configuration for the @code{C} language.

The tag can also be specified using @command{libtool}'s
@option{--tag=@var{tag}} option (@pxref{Invoking libtool}).  It is a good
idea to do so in @file{Makefile} rules, because that will allow users to
substitute the compiler without relying on @command{libtool} inference
heuristics.  When no tag is specified, @command{libtool} will default
to @code{CC}; this tag always exists.

Finally, the set of tags available in a particular project can be
retrieved by tracing for the @code{LT_SUPPORTED_TAG} macro (@pxref{Trace
interface}).

@node Versioning
@chapter Library interface versions
@cindex dynamic dependencies
@cindex dependency versioning
@cindex shared library versions

The most difficult issue introduced by shared libraries is that of
creating and resolving runtime dependencies.  Dependencies on programs
and libraries are often described in terms of a single name, such as
@command{sed}.  So, one may say ``libtool depends on sed,'' and that is
good enough for most purposes.

However, when an interface changes regularly, we need to be more
specific: ``Gnus 5.1 requires Emacs 19.28 or above.''  Here, the
description of an interface consists of a name, and a ``version
number.''

Even that sort of description is not accurate enough for some purposes.
What if Emacs 20 changes enough to break Gnus 5.1?

The same problem exists in shared libraries: we require a formal version
system to describe the sorts of dependencies that programs have on
shared libraries, so that the dynamic linker can guarantee that programs
are linked only against libraries that provide the interface they
require.

@menu
* Interfaces::                  What are library interfaces?
* Libtool versioning::          Libtool's versioning system.
* Updating version info::       Changing version information before releases.
* Release numbers::             Breaking binary compatibility for aesthetics.
@end menu

@node Interfaces
@section What are library interfaces?
@cindex library interfaces

Interfaces for libraries may be any of the following (and more):

@itemize @bullet
@item
global variables: both names and types

@item
global functions: argument types and number, return types, and function names

@item
standard input, standard output, standard error, and file formats

@item
sockets, pipes, and other inter-process communication protocol formats
@end itemize

Note that static functions do not count as interfaces, because they are
not directly available to the user of the library.

@node Libtool versioning
@section Libtool's versioning system
@cindex libtool library versions
@cindex formal versioning
@cindex versioning, formal

Libtool has its own formal versioning system.  It is not as flexible as
some, but it is definitely the simplest of the more powerful versioning
systems.

Think of a library as exporting several sets of interfaces, arbitrarily
represented by integers.  When a program is linked against a library, it
may use any subset of those interfaces.

Libtool's description of the interfaces that a program uses is simple:
it encodes the least and the greatest interface numbers in the resulting
binary (@var{first-interface}, @var{last-interface}).

The dynamic linker is guaranteed that if a library supports @emph{every}
interface number between @var{first-interface} and @var{last-interface},
then the program can be relinked against that library.

Note that this can cause problems because libtool's compatibility
requirements are actually stricter than is necessary.

Say @file{libhello} supports interfaces 5, 16, 17, 18, and 19, and that
libtool is used to link @file{test} against @file{libhello}.

Libtool encodes the numbers 5 and 19 in @file{test}, and the dynamic
linker will only link @file{test} against libraries that support
@emph{every} interface between 5 and 19.  So, the dynamic linker refuses
to link @file{test} against @file{libhello}!

In order to eliminate this problem, libtool only allows libraries to
declare consecutive interface numbers.  So, @file{libhello} can declare at
most that it supports interfaces 16 through 19.  Then, the dynamic
linker will link @file{test} against @file{libhello}.

So, libtool library versions are described by three integers:

@table @var
@item current
The most recent interface number that this library implements.

@item revision
The implementation number of the @var{current} interface.

@item age
The difference between the newest and oldest interfaces that this
library implements.  In other words, the library implements all the
interface numbers in the range from number @code{@var{current} -
@var{age}} to @code{@var{current}}.
@end table

If two libraries have identical @var{current} and @var{age} numbers,
then the dynamic linker chooses the library with the greater
@var{revision} number.

@node Updating version info
@section Updating library version information

If you want to use libtool's versioning system, then you must specify
the version information to libtool using the @option{-version-info} flag
during link mode (@pxref{Link mode}).

This flag accepts an argument of the form
@samp{@var{current}[:@var{revision}[:@var{age}]]}.  So, passing
@option{-version-info 3:12:1} sets @var{current} to 3, @var{revision} to
12, and @var{age} to 1.

If either @var{revision} or @var{age} are omitted, they default to 0.
Also note that @var{age} must be less than or equal to the @var{current}
interface number.

Here are a set of rules to help you update your library version
information:

@enumerate 1
@item
Start with version information of @samp{0:0:0} for each libtool library.

@item
Update the version information only immediately before a public release
of your software.  More frequent updates are unnecessary, and only
guarantee that the current interface number gets larger faster.

@item
If the library source code has changed at all since the last update,
then increment @var{revision} (@samp{@var{c}:@var{r}:@var{a}} becomes
@samp{@var{c}:@math{r+1}:@var{a}}).

@item
If any interfaces have been added, removed, or changed since the last
update, increment @var{current}, and set @var{revision} to 0.

@item
If any interfaces have been added since the last public release, then
increment @var{age}.

@item
If any interfaces have been removed since the last public release, then
set @var{age} to 0.
@end enumerate

@strong{@emph{Never}} try to set the interface numbers so that they
correspond to the release number of your package.  This is an abuse that
only fosters misunderstanding of the purpose of library versions.
Instead, use the @option{-release} flag (@pxref{Release numbers}), but be
warned that every release of your package will not be binary compatible
with any other release.

@node Release numbers
@section Managing release information

Often, people want to encode the name of the package release into the
shared library so that it is obvious to the user which package their
programs are linked against.  This convention is used especially on
@sc{gnu}/Linux:

@example
trick$ @kbd{ls /usr/lib/libbfd*}
/usr/lib/libbfd.a           /usr/lib/libbfd.so.2.7.0.2
/usr/lib/libbfd.so
trick$
@end example

On @samp{trick}, @file{/usr/lib/libbfd.so} is a symbolic link to
@file{libbfd.so.2.7.0.2}, which was distributed as a part of
@samp{binutils-2.7.0.2}.

Unfortunately, this convention conflicts directly with libtool's idea of
library interface versions, because the library interface rarely changes
at the same time that the release number does, and the library suffix is
never the same across all platforms.

So, in order to accommodate both views, you can use the @option{-release}
flag in order to set release information for libraries for which you do not
want to use @option{-version-info}.  For the @file{libbfd} example, the
next release that uses libtool should be built with @samp{-release
2.9.0}, which will produce the following files on @sc{gnu}/Linux:

@example
trick$ @kbd{ls /usr/lib/libbfd*}
/usr/lib/libbfd-2.9.0.so     /usr/lib/libbfd.a
/usr/lib/libbfd.so
trick$
@end example

In this case, @file{/usr/lib/libbfd.so} is a symbolic link to
@file{libbfd-2.9.0.so}.  This makes it obvious that the user is dealing
with @samp{binutils-2.9.0}, without compromising libtool's idea of
interface versions.

Note that this option causes a modification of the library name, so do
not use it unless you want to break binary compatibility with any past
library releases.  In general, you should only use @option{-release} for
package-internal libraries or for ones whose interfaces change very
frequently.

@node Library tips
@chapter Tips for interface design
@cindex library interfaces, design
@cindex design of library interfaces

Writing a good library interface takes a lot of practice and thorough
understanding of the problem that the library is intended to solve.

If you design a good interface, it won't have to change often, you won't
have to keep updating documentation, and users won't have to keep
relearning how to use the library.

Here is a brief list of tips for library interface design that may
help you in your exploits:

@table @asis
@item Plan ahead
Try to make every interface truly minimal, so that you won't need to
delete entry points very often.

@item Avoid interface changes
@cindex renaming interface functions
Some people love redesigning and changing entry points just for the heck
of it (note: @emph{renaming} a function is considered changing an entry
point).  Don't be one of those people.  If you must redesign an
interface, then try to leave compatibility functions behind so that
users don't need to rewrite their existing code.

@item Use opaque data types
@cindex opaque data types
The fewer data type definitions a library user has access to, the
better.  If possible, design your functions to accept a generic pointer
(that you can cast to an internal data type), and provide access
functions rather than allowing the library user to directly manipulate
the data.
That way, you have the freedom to change the data structures without
changing the interface.

This is essentially the same thing as using abstract data types and
inheritance in an object-oriented system.

@item Use header files
@cindex header files
If you are careful to document each of your library's global functions
and variables in header files, and include them in your library source
files, then the compiler will let you know if you make any interface
changes by accident (@pxref{C header files}).

@item Use the @code{static} keyword (or equivalent) whenever possible
@cindex global functions
The fewer global functions your library has, the more flexibility you'll
have in changing them.  Static functions and variables may change forms
as often as you like@dots{} your users cannot access them, so they
aren't interface changes.

@item Be careful with array dimensions
The number of elements in a global array is part of an interface, even
if the header just declares @code{extern int foo[];}.  This is because
on i386 and some other SVR4/ELF systems, when an application
references data in a shared library the size of that data (whatever
its type) is included in the application executable.  If you might
want to change the size of an array or string then provide a pointer
not the actual array.
@end table

@menu
* C header files::              How to write portable include files.
@end menu

@node C header files
@section Writing C header files
@cindex portable C headers
@cindex C header files, portable
@cindex include files, portable

Writing portable C header files can be difficult, since they may be read
by different types of compilers:

@table @asis
@item C++ compilers
C++ compilers require that functions be declared with full prototypes,
since C++ is more strongly typed than C@.  C functions and variables also
need to be declared with the @code{extern "C"} directive, so that the
names aren't mangled.  @xref{C++ libraries}, for other issues relevant
to using C++ with libtool.

@item ANSI C compilers
ANSI C compilers are not as strict as C++ compilers, but functions
should be prototyped to avoid unnecessary warnings when the header file
is @code{#include}d.

@item non-ANSI C compilers
Non-ANSI compilers will report errors if functions are prototyped.
@end table

These complications mean that your library interface headers must use
some C preprocessor magic in order to be usable by each of the above
compilers.

@file{foo.h} in the @file{tests/demo} subdirectory of the libtool
distribution serves as an example for how to write a header file that
can be safely installed in a system directory.

Here are the relevant portions of that file:

@example
/* BEGIN_C_DECLS should be used at the beginning of your declarations,
   so that C++ compilers don't mangle their names.  Use END_C_DECLS at
   the end of C declarations. */
#undef BEGIN_C_DECLS
#undef END_C_DECLS
#ifdef __cplusplus
# define BEGIN_C_DECLS extern "C" @{
# define END_C_DECLS @}
#else
# define BEGIN_C_DECLS /* empty */
# define END_C_DECLS /* empty */
#endif

/* PARAMS is a macro used to wrap function prototypes, so that
   compilers that don't understand ANSI C prototypes still work,
   and ANSI C compilers can issue warnings about type mismatches. */
#undef PARAMS
#if defined (__STDC__) || defined (_AIX) \
        || (defined (__mips) && defined (_SYSTYPE_SVR4)) \
        || defined(WIN32) || defined(__cplusplus)
# define PARAMS(protos) protos
#else
# define PARAMS(protos) ()
#endif
@end example

These macros are used in @file{foo.h} as follows:

@example
#ifndef FOO_H
#define FOO_H 1

/* The above macro definitions. */
#include "@dots{}"

BEGIN_C_DECLS

int foo PARAMS((void));
int hello PARAMS((void));

END_C_DECLS

#endif /* !FOO_H */
@end example

Note that the @file{#ifndef FOO_H} prevents the body of @file{foo.h}
from being read more than once in a given compilation.

Also the only thing that must go outside the
@code{BEGIN_C_DECLS}/@code{END_C_DECLS} pair are @code{#include} lines.
Strictly speaking it is only C symbol names that need to be protected,
but your header files will be more maintainable if you have a single
pair of of these macros around the majority of the header contents.

You should use these definitions of @code{PARAMS}, @code{BEGIN_C_DECLS},
and @code{END_C_DECLS} into your own headers.  Then, you may use them to
create header files that are valid for C++, ANSI, and non-ANSI
compilers@footnote{We used to recommend @code{__P},
@code{__BEGIN_DECLS} and @code{__END_DECLS}.  This was bad advice since
symbols (even preprocessor macro names) that begin with an underscore
are reserved for the use of the compiler.}.

Do not be naive about writing portable code.  Following the tips given
above will help you miss the most obvious problems, but there are
definitely other subtle portability issues.  You may need to cope with
some of the following issues:

@itemize @bullet
@item
Pre-ANSI compilers do not always support the @code{void *} generic
pointer type, and so need to use @code{char *} in its place.

@item
The @code{const}, @code{inline} and @code{signed} keywords are not
supported by some compilers, especially pre-ANSI compilers.

@item
The @code{long double} type is not supported by many compilers.
@end itemize


@node Inter-library dependencies
@chapter Inter-library dependencies
@cindex dependencies between libraries
@cindex inter-library dependencies

By definition, every shared library system provides a way for
executables to depend on libraries, so that symbol resolution is
deferred until runtime.

An @dfn{inter-library dependency} is one in which a library depends on
other libraries.  For example, if the libtool library @file{libhello}
uses the @code{cos} function, then it has an inter-library dependency
on @file{libm}, the math library that implements @code{cos}.

Some shared library systems provide this feature in an
internally-consistent way: these systems allow chains of dependencies of
potentially infinite length.

However, most shared library systems are restricted in that they only
allow a single level of dependencies.  In these systems, programs may
depend on shared libraries, but shared libraries may not depend on other
shared libraries.

In any event, libtool provides a simple mechanism for you to declare
inter-library dependencies: for every library @file{lib@var{name}} that
your own library depends on, simply add a corresponding
@code{-l@var{name}} option to the link line when you create your
library.  To make an example of our @file{libhello} that depends on
@file{libm}:

@example
burger$ @kbd{libtool --mode=link gcc -g -O -o libhello.la foo.lo hello.lo \
                -rpath /usr/local/lib -lm}
burger$
@end example

When you link a program against @file{libhello}, you don't need to
specify the same @samp{-l} options again: libtool will do that for you,
in order to guarantee that all the required libraries are found.  This
restriction is only necessary to preserve compatibility with static
library systems and simple dynamic library systems.

Some platforms, such as AIX, do not even allow you this
flexibility.  In order to build a shared library, it must be entirely
self-contained (that is, have references only to symbols that are found
in the @samp{.lo} files or the specified @samp{-l} libraries), and you
need to specify the @option{-no-undefined} flag.  By default, libtool
builds only static libraries on these kinds of platforms.

The simple-minded inter-library dependency tracking code of libtool
releases prior to 1.2 was disabled because it was not clear when it was
possible to link one library with another, and complex failures would
occur.  A more complex implementation of this concept was re-introduced
before release 1.3, but it has not been ported to all platforms that
libtool supports.  The default, conservative behavior is to avoid
linking one library with another, introducing their inter-dependencies
only when a program is linked with them.

@node Dlopened modules
@chapter Dlopened modules
@findex dlopen
@findex dlsym
@findex dlclose
@findex shl_load
@cindex dynamic linking, applications
@cindex dlopening modules
@cindex modules, dynamic
@cindex application-level dynamic linking

It can sometimes be confusing to discuss @dfn{dynamic linking}, because
the term is used to refer to two different concepts:

@enumerate 1
@item
Compiling and linking a program against a shared library, which is
resolved automatically at run time by the dynamic linker.  In this
process, dynamic linking is transparent to the application.

@item
The application calling functions such as @code{dlopen} that load
arbitrary, user-specified modules at runtime.  This type of dynamic
linking is explicitly controlled by the application.
@end enumerate

To mitigate confusion, this manual refers to the second type of dynamic
linking as @dfn{dlopening} a module.

The main benefit to dlopening object modules is the ability to access
compiled object code to extend your program, rather than using an
interpreted language.  In fact, dlopen calls are frequently used in
language interpreters to provide an efficient way to extend the
language.

As of version @value{VERSION}, libtool provides support for dlopened
modules.  However, you should indicate that your package is willing to
use such support, by using the @code{LT_INIT} option @samp{dlopen} in
@file{configure.ac}.  If this option is not given, libtool will assume
no dlopening mechanism is available, and will try to simulate it.

This chapter discusses how you as a dlopen application developer might
use libtool to generate dlopen-accessible modules.

@menu
* Building modules::            Creating dlopenable objects and libraries.
* Dlpreopening::                Dlopening that works on static platforms.
* Linking with dlopened modules:: Using dlopenable modules in libraries.
* Finding the dlname::          Choosing the right file to @code{dlopen}.
* Dlopen issues::               Unresolved problems that need your attention.
@end menu

@node Building modules
@section Building modules to dlopen

On some operating systems, a program symbol must be specially declared
in order to be dynamically resolved with the @code{dlsym} (or
equivalent) function.  Libtool provides the @option{-export-dynamic} and
@option{-module} link flags (@pxref{Link mode}), for you to make that
declaration.  You need to use these flags if you are linking an
application program that dlopens other modules or a libtool library
that will also be dlopened.

For example, if we wanted to build a shared library, @file{hello},
that would later be dlopened by an application, we would add
@option{-module} to the other link flags:

@example
burger$ @kbd{libtool --mode=link gcc -module -o hello.la foo.lo \
                hello.lo -rpath /usr/local/lib -lm}
burger$
@end example

If symbols from your @emph{executable} are needed to satisfy unresolved
references in a library you want to dlopen you will have to use the flag
@option{-export-dynamic}.  You should use @option{-export-dynamic} while
linking the executable that calls dlopen:

@example
burger$ @kbd{libtool --mode=link gcc -export-dynamic -o helldl main.o}
burger$
@end example

@node Dlpreopening
@section Dlpreopening

Libtool provides special support for dlopening libtool object and
libtool library files, so that their symbols can be resolved
@emph{even on platforms without any @code{dlopen} and @code{dlsym}
functions}.

Consider the following alternative ways of loading code into your
program, in order of increasing ``laziness'':

@enumerate 1
@item
Linking against object files that become part of the program executable,
whether or not they are referenced.  If an object file cannot be found,
then the compile time linker refuses to create the executable.

@item
Declaring a static library to the linker, so that it is searched at link
time in order to satisfy any undefined references in the above object
files.  If the static library cannot be found, then the compile time
linker refuses to create the executable.

@item
Declaring a shared library to the runtime linker, so that it is searched
at runtime in order to satisfy any undefined references in the above
files.  If the shared library cannot be found, then the dynamic linker
aborts the program before it runs.

@item
Dlopening a module, so that the application can resolve its own,
dynamically-computed references.  If there is an error opening the
module, or the module is not found, then the application can recover
without crashing.
@end enumerate

Libtool emulates @option{-dlopen} on static platforms by linking objects
into the program at compile time, and creating data structures that
represent the program's symbol table.  In order to use this feature,
you must declare the objects you want your application to dlopen by
using the @option{-dlopen} or @option{-dlpreopen} flags when you link your
program (@pxref{Link mode}).

@deftypefn {Structure} {struct} lt_dlsymbol @{ @w{const char *@var{name};} @w{void *@var{address};} @}
The @var{name} attribute is a null-terminated character string of the
symbol name, such as @code{"fprintf"}.  The @var{address} attribute is a
generic pointer to the appropriate object, such as @code{&fprintf}.
@end deftypefn

@deftypefn {Structure} {struct} lt_dlsymlist @{ @w{const char *@var{originator};} @w{const lt_dlsymbol @var{symbols}[];} @}
The @var{originator} attribute is a null-terminated character string,
naming the compilation unit that @var{symbols} were preloaded on
behalf of.  This is usually the basename of a library,
@file{libltdl.la} has a corresponding @var{originator} value of
@samp{libltdl}; if the @var{symbols} are for the benefit of the
application proper, then @var{originator} is @samp{@@PROGRAM@@},
though Libtool takes care of that detail if you use
@samp{LTDL_SET_PRELOADED_SYMBOLS}.
@end deftypefn

@deftypevar {const lt_dlsymlist *} lt_preloaded_symbols
An array of @var{lt_symbol} structures, representing all the preloaded
symbols linked into the program proper.  For each module
@option{-dlpreopen}ed by the Libtool linked program
there is an element with the @var{name} of the module and a @var{address}
of @code{0}, followed by all symbols exported from this file.
For the executable itself the special name @samp{@@PROGRAM@@} is used.
The last element of all has a @var{name} and @var{address} of
@code{0}.
@end deftypevar

Some compilers may allow identifiers that are not valid in ANSI C, such
as dollar signs.  Libtool only recognizes valid ANSI C symbols (an
initial ASCII letter or underscore, followed by zero or more ASCII
letters, digits, and underscores), so non-ANSI symbols will not appear
in @var{lt_preloaded_symbols}.

@deftypefun int lt_dlpreload (const lt_dlsymlist *@var{preloaded})
Register the list of preloaded modules @var{preloaded}.
If @var{preloaded} is @code{NULL}, then all previously registered
symbol lists, except the list set by @code{lt_dlpreload_default},
are deleted.  Return 0 on success.
@end deftypefun

@deftypefun int lt_dlpreload_default (const lt_dlsymlist *@var{preloaded})
Set the default list of preloaded modules to @var{preloaded}, which
won't be deleted by @code{lt_dlpreload}.  Note that this function does
@emph{not} require libltdl to be initialized using @code{lt_dlinit} and
can be used in the program to register the default preloaded modules.
Instead of calling this function directly, most programs will use the
macro @code{LTDL_SET_PRELOADED_SYMBOLS}.

Return 0 on success.
@end deftypefun

@defmac LTDL_SET_PRELOADED_SYMBOLS
Set the default list of preloaded symbols.
Should be used in your program to initialize libltdl's
list of preloaded modules.

@example
#include <ltdl.h>

int main() @{
  /* ... */
  LTDL_SET_PRELOADED_SYMBOLS();
  /* ... */
@}
@end example
@end defmac

@deftypefn {Function Type} {int} lt_dlpreload_callback_func (lt_dlhandle @var{handle})
Functions of this type can be passed to @code{lt_dlpreload_open},
which in turn will call back into a function thus passed for each
preloaded module that it opens.
@end deftypefn

@deftypefun int lt_dlpreload_open (@w{const char *@var{originator},} @w{lt_dlpreload_callback_func *@var{func})}
Load all of the preloaded modules for @var{originator}.  For every
module opened in this way, call @var{func}.

@noindent
To open all of the modules preloaded into @file{libhell.la}
(presumably from within the @samp{libhell.a} initialisation code):

@example
#define preloaded_symbols lt_libhell_LTX_preloaded_symbols

static int hell_preload_callback (lt_dlhandle handle);

int
hell_init (void)
@{
  @dots{}
  if (lt_dlpreload (&preloaded_symbols) == 0)
    @{
      lt_dlpreload_open ("libhell", preload_callback);
    @}
  @dots{}
@}
@end example

@noindent
Note that to prevent clashes between multiple preloaded modules, the
preloaded symbols are accessed via a mangled symbol name: to get the
symbols preloaded into @samp{libhell}, you must prefix
@samp{preloaded_symbols} with @samp{lt_}; the originator name,
@samp{libhell} in this case; and @samp{_LTX_}.  That is,
@samp{lt_libhell_LTX_preloaded_symbols} here.
@end deftypefun


@node Linking with dlopened modules
@section Linking with dlopened modules
@cindex linking, dlopen
@cindex linking, dlpreopen

When, say, an interpreter application uses dlopened modules to extend
the list of methods it provides, an obvious abstraction for the
maintainers of the interpreter is to have all methods (including the
built in ones supplied with the interpreter) accessed through
dlopen.  For one thing, the dlopening functionality will be tested
even during routine invocations.  For another, only one subsystem has
to be written for getting methods into the interpreter.

The downside of this abstraction is, of course, that environments that
provide only static linkage can't even load the intrinsic interpreter
methods.  Not so!  We can statically link those methods by
@strong{dlpreopening} them.

Unfortunately, since platforms such as @sc{aix} and cygwin require
that all library symbols must be resolved at compile time, the
interpreter maintainers will need to provide a library to both its own
dlpreopened modules, and third-party modules loaded by dlopen.  In
itself, that is not so bad, except that the interpreter too must
provide those same symbols otherwise it will be impossible to resolve
all the symbols required by the modules as they are loaded.  Things
are even worse if the code that loads the modules for the interpreter
is itself in a library -- and that is usually the case for any
non-trivial application.  Modern platforms take care of this by
automatically loading all of a module's dependency libraries as the
module is loaded (libltdl can do this even on platforms that can't do
it by themselves).  In the end, this leads to problems with duplicated
symbols and prevents modules from loading, and prevents the
application from compiling when modules are preloaded.

@example
,-------------.    ,------------------.    ,-----------------.
| Interpreter |---->     Module------------>   Third-party   |
`-------------'    |     Loader       |    |Dlopened Modules |
                   |        |         |    `-----------------'
                   |,-------v--------.|             |
                   ||  Dlpreopened   ||             |
                   ||    Modules     ||             |
                   |`----------------'|             |
                   |        |         |             |
                   |,-------v--------.|    ,--------v--------.
                   ||Module Interface||    |Module Interface |
                   ||    Library     ||    |     Library     |
                   |`----------------'|    `-----------------'
                   `------------------'
@end example

Libtool has the concept of @dfn{weak library interfaces} to circumvent
this problem.  Recall that the code that dlopens method-provider
modules for the interpreter application resides in a library: All of
the modules and the dlopener library itself should be linked against
the common library that resolves the module symbols at compile time.
To guard against duplicate symbol definitions, and for dlpreopened
modules to work at all in this scenario, the dlopener library must
declare that it provides a weak library interface to the common
symbols in the library it shares with the modules.  That way, when
@command{libtool} links the @strong{Module Loader} library with some
@strong{Dlpreopened Modules} that were in turn linked against the
@strong{Module Interface Library}, it knows that the @strong{Module
Loader} provides an already loaded @strong{Module Interface Library}
to resolve symbols for the @strong{Dlpreopened Modules}, and doesn't
ask the compiler driver to link an identical @strong{Module Interface
Library} dependency library too.

In conjunction with Automake, the @file{Makefile.am} for the
@strong{Module Loader} might look like this:

@example
lib_LTLIBRARIES = libinterface.la libloader.la

libinterface_la_SOURCES = interface.c interface.h
libinterface_la_LDFLAGS = -version-info 3:2:1

libloader_la_SOURCES    = loader.c
libloader_la_LDFLAGS    = -weak libinterface.la \
                          -version-info 3:2:1 \
                          -dlpreopen ../modules/intrinsics.la
libloader_la_LIBADD     = $(libinterface_la_OBJECTS)
@end example

And the @file{Makefile.am} for the @file{intrinsics.la} module in a
sibling @file{modules} directory might look like this:

@example
AM_CPPFLAGS             = -I$(srcdir)/../libloader
AM_LDFLAGS              = -no-undefined -module -avoid-version \
                          -export-dynamic

noinst_LTLIBRARIES      = intrinsics.la

intrinsics_la_LIBADD    = ../libloader/libinterface.la

../libloader/libinterface.la:
        cd ../libloader && $(MAKE) $(AM_MAKEFLAGS) libinterface.la
@end example

@cindex -weak option
For a more complex example, see the sources of @file{libltdl} in the
Libtool distribution, which is built with the help of the @option{-weak}
option.


@node Finding the dlname
@section Finding the correct name to dlopen
@cindex names of dynamic modules
@cindex dynamic modules, names

After a library has been linked with @option{-module}, it can be dlopened.
Unfortunately, because of the variation in library names,
your package needs to determine the correct file to dlopen.

The most straightforward and flexible implementation is to determine the
name at runtime, by finding the installed @samp{.la} file, and searching
it for the following lines:

@example
# The name that we can @code{dlopen}.
dlname='@var{dlname}'
@end example

If @var{dlname} is empty, then the library cannot be dlopened.
Otherwise, it gives the dlname of the library.  So, if the library was
installed as @file{/usr/local/lib/libhello.la}, and the @var{dlname} was
@file{libhello.so.3}, then @file{/usr/local/lib/libhello.so.3} should be
dlopened.

If your program uses this approach, then it should search the
directories listed in the @code{LD_LIBRARY_PATH}@footnote{@code{LIBPATH}
on AIX, and @code{SHLIB_PATH} on HP-UX.} environment variable, as well as
the directory where libraries will eventually be installed.  Searching
this variable (or equivalent) will guarantee that your program can find
its dlopened modules, even before installation, provided you have linked
them using libtool.

@node Dlopen issues
@section Unresolved dlopen issues
@cindex pitfalls with dlopen
@cindex dlopening, pitfalls
@cindex trouble with dlopen

The following problems are not solved by using libtool's dlopen support:

@itemize @bullet
@item
Dlopen functions are generally only available on shared library
platforms.  If you want your package to be portable to static platforms,
you have to use either libltdl (@pxref{Using libltdl}) or develop your
own alternatives to dlopening dynamic code.
Most reasonable solutions involve writing wrapper functions for the
@code{dlopen} family, which do package-specific tricks when dlopening
is unsupported or not available on a given platform.

@item
There are major differences in implementations of the @code{dlopen}
family of functions.  Some platforms do not even use the same function
names (notably HP-UX, with its @code{shl_load} family).

@item
The application developer must write a custom search function in order
to discover the correct module filename to supply to @code{dlopen}.
@end itemize

@node Using libltdl
@chapter Using libltdl
@findex libltdl
@findex dlopen
@findex dlsym
@findex dlclose
@findex dlerror
@findex shl_load
@cindex dynamic linking, applications
@cindex dlopening modules
@cindex modules, dynamic
@cindex application-level dynamic linking

Libtool provides a small library, called @file{libltdl}, that aims at
hiding the various difficulties of dlopening libraries from programmers.
It consists of a few headers and small C source files that can be
distributed with applications that need dlopening functionality.  On
some platforms, whose dynamic linkers are too limited for a simple
implementation of @file{libltdl} services, it requires @sc{gnu} DLD, or it
will only emulate dynamic linking with libtool's dlpreopening mechanism.

@noindent
libltdl supports currently the following dynamic linking mechanisms:

@itemize @bullet
@item
@code{dlopen} (Solaris, Linux and various BSD flavors)
@item
@code{shl_load} (HP-UX)
@item
@code{LoadLibrary} (Win16 and Win32)
@item
@code{load_add_on} (BeOS)
@item
@code{NSAddImage} or @code{NSLinkModule} (Darwin and Mac OS X)
@item
@sc{gnu} DLD (emulates dynamic linking for static libraries)
@item
libtool's dlpreopen (see @pxref{Dlpreopening})
@end itemize

@noindent
libltdl is licensed under the terms of the @sc{gnu} Library General
Public License, with the following exception:

@quotation
As a special exception to the @sc{gnu} Lesser General Public License,
if you distribute this file as part of a program or library that
is built using @sc{gnu} Libtool, you may include it under the same
distribution terms that you use for the rest of that program.
@end quotation

@menu
* Libltdl interface::           How to use libltdl in your programs.
* Modules for libltdl::         Creating modules that can be @code{dlopen}ed.
* Thread Safety in libltdl::    Registering callbacks for multi-thread safety.
* User defined module data::    Associating data with loaded modules.
* Module loaders for libltdl::  Creating user defined module loaders.
* Distributing libltdl::        How to distribute libltdl with your package.
@end menu

@node Libltdl interface
@section How to use libltdl in your programs

@noindent
The libltdl API is similar to the dlopen interface of Solaris and Linux,
which is very simple but powerful.

@noindent
To use libltdl in your program you have to include the header file @file{ltdl.h}:

@example
#include <ltdl.h>
@end example

@noindent
The early releases of libltdl used some symbols that violated the
@sc{posix} namespace conventions.  These symbols are now deprecated,
and have been replaced by those described here.  If you have code that
relies on the old deprecated symbol names, defining
@samp{LT_NON_POSIX_NAMESPACE} before you include @file{ltdl.h} provides
conversion macros.  Whichever set of symbols you use, the new API is
not binary compatible with the last, so you will need to recompile
your application in order to use this version of libltdl.

@noindent
Note that libltdl is not well tested in a multithreaded environment,
though the intention is that it should work (@pxref{Thread Safety
in libltdl, , Using libltdl in a multi threaded environment}).  It was
reported that @sc{gnu}/Linux's glibc 2.0's @code{dlopen} with
@samp{RTLD_LAZY} (which libltdl uses by default) is not thread-safe,
but this problem is supposed to be fixed in glibc 2.1.  On the other
hand, @samp{RTLD_NOW} was reported to introduce problems in
multi-threaded applications on FreeBSD@.  Working around these problems
is left as an exercise for the reader; contributions are certainly
welcome.

@noindent
The following macros are defined by including @file{ltdl.h}:

@defmac LT_PATHSEP_CHAR
@code{LT_PATHSEP_CHAR} is the system-dependent path separator,
that is, @samp{;} on Windows and @samp{:} everywhere else.
@end defmac

@defmac LT_DIRSEP_CHAR
If @code{LT_DIRSEP_CHAR} is defined, it can be used as directory
separator in addition to @samp{/}.  On Windows, this contains
@samp{\}.
@end defmac


@noindent
The following types are defined in @file{ltdl.h}:

@deftp {Type} lt_dlhandle
@code{lt_dlhandle} is a module ``handle''.
Every lt_dlopened module has a handle associated with it.
@end deftp

@deftp {Type} lt_dladvise
@code{lt_dladvise} is used to control optional module loading modes.
If it is not used, the default mode of the underlying system module
loader is used.
@end deftp

@deftp {Type} lt_dlsymlist
@code{lt_dlsymlist} is a symbol list for dlpreopened modules.
This structure is described in @pxref{Dlpreopening}.
@end deftp

@page
@noindent
libltdl provides the following functions:

@deftypefun int lt_dlinit (void)
Initialize libltdl.
This function must be called before using libltdl
and may be called several times.
Return 0 on success, otherwise the number of errors.
@end deftypefun

@deftypefun int lt_dlexit (void)
Shut down libltdl and close all modules.
This function will only then shut down libltdl when it was called as
many times as @code{lt_dlinit} has been successfully called.
Return 0 on success, otherwise the number of errors.
@end deftypefun

@deftypefun lt_dlhandle lt_dlopen (const char *@var{filename})
Open the module with the file name @var{filename} and return a
handle for it.  @code{lt_dlopen} is able to open libtool dynamic
modules, preloaded static modules, the program itself and
native dynamic modules@footnote{Some platforms, notably Mac OS X,
differentiate between a runtime library that cannot be opened by
@code{lt_dlopen} and a dynamic module that can.  For maximum
portability you should try to ensure that you only pass
@code{lt_dlopen} objects that have been compiled with libtool's
@option{-module} flag.}.

Unresolved symbols in the module are resolved using its dependency
libraries and previously dlopened modules.  If the executable using
this module was linked with the @option{-export-dynamic} flag, then the
global symbols in the executable will also be used to resolve
references in the module.

If @var{filename} is @code{NULL} and the program was linked with
@option{-export-dynamic} or @option{-dlopen self}, @code{lt_dlopen} will
return a handle for the program itself, which can be used to access its
symbols.

If libltdl cannot find the library and the file name @var{filename} does
not have a directory component it will additionally look in the
following search paths for the module (in the following order):

@enumerate 1
@item user-defined search path:
This search path can be changed by the program using the
functions @code{lt_dlsetsearchpath}, @code{lt_dladdsearchdir} and
@code{lt_dlinsertsearchdir}.

@item libltdl's search path:
This search path is the value of the environment variable
@var{LTDL_LIBRARY_PATH}.

@item system library search path:
The system dependent library search path
(e.g.@: on Linux it is @var{LD_LIBRARY_PATH}).
@end enumerate

Each search path must be a list of absolute directories separated by
@code{LT_PATHSEP_CHAR}, for example, @code{"/usr/lib/mypkg:/lib/foo"}.
The directory names may not contain the path separator.

If the same module is loaded several times, the same handle is returned.
If @code{lt_dlopen} fails for any reason, it returns @code{NULL}.
@end deftypefun

@deftypefun lt_dlhandle lt_dlopenext (const char *@var{filename})
The same as @code{lt_dlopen}, except that it tries to append
different file name extensions to the file name.
If the file with the file name @var{filename} cannot be found
libltdl tries to append the following extensions:

@enumerate 1
@item the libtool archive extension @samp{.la}
@item the extension used for native dynamically loadable modules on the host platform, e.g., @samp{.so}, @samp{.sl}, etc.
@end enumerate

This lookup strategy was designed to allow programs that don't
have knowledge about native dynamic libraries naming conventions
to be able to @code{dlopen} such libraries as well as libtool modules
transparently.
@end deftypefun

@deftypefun lt_dlhandle lt_dlopenadvise (const char *@var{filename}, @w{lt_dladvise @var{advise}})
The same as @code{lt_dlopen}, except that it also requires an additional
argument which may contain additional hints to the underlying system
module loader.  The @var{advise} parameter is opaque and can only be
accessed with the functions documented below.

Note that this function does not change the content of @var{advise}, so
unlike the other calls in this @sc{api} takes a direct @code{lt_dladvise}
type, and not a pointer to the same.
@end deftypefun

@deftypefun int lt_dladvise_init (lt_dladvise *@var{advise})
The @var{advise} parameter can be used to pass hints to the module
loader when using @code{lt_dlopenadvise} to perform the loading.
The @var{advise} parameter needs to be initialised by this function
before it can be used.  Any memory used by @var{advise} needs to be
recycled with @code{lt_dladvise_destroy} when it is no longer needed.

On failure, @code{lt_dladvise_init} returns non-zero and sets an error
message that can be retrieved with @code{lt_dlerror}.
@end deftypefun

@deftypefun int lt_dladvise_destroy (lt_dladvise *@var{advise})
Recycle the memory used by @var{advise}.  For an example, see the
documentation for @code{lt_dladvise_ext}.

On failure, @code{lt_dladvise_destroy} returns non-zero and sets an error
message that can be retrieved with @code{lt_dlerror}.
@end deftypefun

@deftypefun int lt_dladvise_ext (lt_dladvise *@var{advise})
Set the @code{ext} hint on @var{advise}.  Passing an @var{advise}
parameter to @code{lt_dlopenadvise} with this hint set causes it to
try to append different file name extensions like @code{lt_dlopenext}.

The following example is equivalent to calling
@code{lt_dlopenext (filename)}:

@example
lt_dlhandle
my_dlopenext (const char *filename)
@{
  lt_dlhandle handle = 0;
  lt_dladvise advise;

  if (!lt_dladvise_init (&advise) && !lt_dladvise_ext (&advise))
    handle = lt_dlopenadvise (filename, advise);

  lt_dladvise_destroy (&advise);

  return handle;
@}
@end example

On failure, @code{lt_dladvise_ext} returns non-zero and sets an error
message that can be retrieved with @code{lt_dlerror}.
@end deftypefun

@deftypefun int lt_dladvise_global (lt_dladvise *@var{advise})
Set the @code{symglobal} hint on @var{advise}.  Passing an @var{advise}
parameter to @code{lt_dlopenadvise} with this hint set causes it to try
to make the loaded module's symbols globally available for resolving
unresolved symbols in subsequently loaded modules.

If neither the @code{symglobal} nor the @code{symlocal} hints are set,
or if a module is loaded without using the @code{lt_dlopenadvise} call
in any case, then the visibility of the module's symbols will be as per
the default for the underlying module loader and @sc{os}.  Even if a
suitable hint is passed, not all loaders are able to act upon it in
which case @code{lt_dlgetinfo} will reveal whether the hint was actually
followed.

On failure, @code{lt_dladvise_global} returns non-zero and sets an error
message that can be retrieved with @code{lt_dlerror}.
@end deftypefun

@deftypefun int lt_dladvise_local (lt_dladvise *@var{advise})
Set the @code{symlocal} hint on @var{advise}.  Passing an @var{advise}
parameter to @code{lt_dlopenadvise} with this hint set causes it to try
to keep the loaded module's symbols hidden so that they are not
visible to subsequently loaded modules.

If neither the @code{symglobal} nor the @code{symlocal} hints are set,
or if a module is loaded without using the @code{lt_dlopenadvise} call
in any case, then the visibility of the module's symbols will be as per
the default for the underlying module loader and @sc{os}.  Even if a
suitable hint is passed, not all loaders are able to act upon it in
which case @code{lt_dlgetinfo} will reveal whether the hint was actually
followed.

On failure, @code{lt_dladvise_local} returns non-zero and sets an error
message that can be retrieved with @code{lt_dlerror}.
@end deftypefun

@deftypefun int lt_dladvise_resident (lt_dladvise *@var{advise})
Set the @code{resident} hint on @var{advise}.  Passing an @var{advise}
parameter to @code{lt_dlopenadvise} with this hint set causes it to try
to make the loaded module resident in memory, so that it cannot be
unloaded with a later call to @code{lt_dlclose}.

On failure, @code{lt_dladvise_resident} returns non-zero and sets an error
message that can be retrieved with @code{lt_dlerror}.
@end deftypefun

@deftypefun int lt_dladvise_preload (lt_dladvise *@var{advise})
Set the @code{preload} hint on @var{advise}.  Passing an @var{advise}
parameter to @code{lt_dlopenadvise} with this hint set causes it to
load only preloaded modules, so that if a suitable preloaded module is
not found, @code{lt_dlopenadvise} will return @code{NULL}.
@end deftypefun

@deftypefun int lt_dlclose (lt_dlhandle @var{handle})
Decrement the reference count on the module @var{handle}.
If it drops to zero and no other module depends on this module,
then the module is unloaded.
Return 0 on success.
@end deftypefun

@deftypefun {void *} lt_dlsym (lt_dlhandle @var{handle}, const char *@var{name})
Return the address in the module @var{handle}, where the symbol given
by the null-terminated string @var{name} is loaded.
If the symbol cannot be found, @code{NULL} is returned.
@end deftypefun

@deftypefun {const char *} lt_dlerror (void)
Return a human readable string describing the most
recent error that occurred from any of libltdl's functions.
Return @code{NULL} if no errors have occurred since initialization
or since it was last called.
@end deftypefun

@deftypefun int lt_dladdsearchdir (const char *@var{search_dir})
Append the search directory @var{search_dir} to the current user-defined
library search path.  Return 0 on success.
@end deftypefun

@deftypefun int lt_dlinsertsearchdir (@w{const char *@var{before}}, @w{const char *@var{search_dir}})
Insert the search directory @var{search_dir} into the user-defined library
search path, immediately before the element starting at address
@var{before}.  If @var{before} is @samp{NULL}, then @var{search_dir} is
appending as if @code{lt_dladdsearchdir} had been called.  Return 0 on success.
@end deftypefun

@deftypefun int lt_dlsetsearchpath (const char *@var{search_path})
Replace the current user-defined library search path with
@var{search_path}, which must be a list of absolute directories separated
by @code{LT_PATHSEP_CHAR}.  Return 0 on success.
@end deftypefun

@deftypefun {const char *}lt_dlgetsearchpath (void)
Return the current user-defined library search path.
@end deftypefun

@deftypefun int lt_dlforeachfile (@w{const char *@var{search_path}}, @w{int (*@var{func}) (const char *@var{filename}, void * @var{data})}, @w{void * @var{data}})
In some applications you may not want to load individual modules with
known names, but rather find all of the modules in a set of
directories and load them all during initialisation.  With this function
you can have libltdl scan the @code{LT_PATHSEP_CHAR}-delimited directory list
in @var{search_path} for candidates, and pass them, along with
@var{data} to your own callback function, @var{func}.  If @var{search_path} is
@samp{NULL}, then search all of the standard locations that
@code{lt_dlopen} would examine.  This function will continue to make
calls to @var{func} for each file that it discovers in @var{search_path}
until one of these calls returns non-zero, or until the files are
exhausted.  @samp{lt_dlforeachfile} returns the value returned by the last
call made to @var{func}.

For example you could define @var{func} to build an ordered
@dfn{argv}-like vector of files using @var{data} to hold the address of
the start of the vector.
@end deftypefun

@deftypefun int lt_dlmakeresident (lt_dlhandle @var{handle})
Mark a module so that it cannot be @samp{lt_dlclose}d.  This can be
useful if a module implements some core functionality in your project
that would cause your code to crash if removed.  Return 0 on success.

If you use @samp{lt_dlopen (NULL)} to get a @var{handle} for the running
binary, that handle will always be marked as resident, and consequently
cannot be successfully @samp{lt_dlclose}d.
@end deftypefun

@deftypefun int lt_dlisresident (lt_dlhandle @var{handle})
Check whether a particular module has been marked as resident, returning 1
if it has or 0 otherwise.  If there is an error while executing this
function, return -1 and set an error message for retrieval with
@code{lt_dlerror}.
@end deftypefun

@node Modules for libltdl
@section Creating modules that can be @code{dlopen}ed

Libtool modules are created like normal libtool libraries with a few
exceptions:

You have to link the module with libtool's @option{-module} switch,
and you should link any program that is intended to dlopen the module with
@option{-dlopen @var{modulename.la}} where possible, so that libtool can
dlpreopen the module on platforms that do not support dlopening.  If
the module depends on any other libraries, make sure you specify them
either when you link the module or when you link programs that dlopen it.
If you want to disable versioning (@pxref{Versioning}) for a specific module
you should link it with the @option{-avoid-version} switch.
Note that libtool modules don't need to have a "lib" prefix.
However, Automake 1.4 or higher is required to build such modules.

Usually a set of modules provide the same interface, i.e.@: exports the same
symbols, so that a program can dlopen them without having to know more
about their internals: In order to avoid symbol conflicts all exported
symbols must be prefixed with "modulename_LTX_" (@var{modulename} is
the name of the module).  Internal symbols must be named in such a way
that they won't conflict with other modules, for example, by prefixing
them with "_modulename_".  Although some platforms support having the
same symbols defined more than once it is generally not portable and
it makes it impossible to dlpreopen such modules.

libltdl will automatically cut the prefix off to get the real name of
the symbol.  Additionally, it supports modules that do not use a
prefix so that you can also dlopen non-libtool modules.

@file{foo1.c} gives an example of a portable libtool module.
Exported symbols are prefixed with "foo1_LTX_", internal symbols
with "_foo1_".  Aliases are defined at the beginning so that the code
is more readable.

@example
/* aliases for the exported symbols */
#define foo  foo1_LTX_foo
#define bar  foo1_LTX_bar

/* a global variable definition */
int bar = 1;

/* a private function */
int _foo1_helper() @{
  return bar;
@}

/* an exported function */
int foo() @{
  return _foo1_helper();
@}
@end example

@noindent
The @file{Makefile.am} contains the necessary rules to build the
module @file{foo1.la}:

@example
...
lib_LTLIBRARIES = foo1.la

foo1_la_SOURCES = foo1.c
foo1_la_LDFLAGS = -module
...
@end example


@node Thread Safety in libltdl
@section Using libltdl in a multi threaded environment

Libltdl provides a wrapper around whatever dynamic run-time object
loading mechanisms are provided by the host system, many of which are
themselves not thread safe.  Consequently libltdl cannot itself be
consistently thread safe.

If you wish to use libltdl in a multithreaded environment, then you
must mutex lock around libltdl calls, since they may in turn be calling
non-thread-safe system calls on some target hosts.

Some old releases of libtool provided a mutex locking @sc{api} that
was unusable with POSIX threads, so callers were forced to lock around
all libltdl @sc{api} calls anyway.  That mutex locking @sc{api} was
next to useless, and is not present in current releases.

Some future release of libtool may provide a new POSIX thread
compliant mutex locking @sc{api}.

@node User defined module data
@section Data associated with loaded modules

Some of the internal information about each loaded module that is
maintained by libltdl is available to the user, in the form of this
structure:

@deftypefn {Type} {struct} lt_dlinfo @{ @w{char *@var{filename};} @w{char *@var{name};} @w{int @var{ref_count};} @w{int @var{is_resident};} @w{int @var{is_symglobal};} @w{int @var{is_symlocal};}@}
@code{lt_dlinfo} is used to store information about a module.
The @var{filename} attribute is a null-terminated character string of
the real module file name.  If the module is a libtool module then
@var{name} is its module name (e.g.@: @code{"libfoo"} for
@code{"dir/libfoo.la"}), otherwise it is set to @code{NULL}.  The
@var{ref_count} attribute is a reference counter that describes how
often the same module is currently loaded. The remaining fields can
be compared to any hints that were passed to @code{lt_dlopenadvise}
to determine whether the underlying loader was able to follow them.
@end deftypefn

The following function will return a pointer to libltdl's internal copy
of this structure for the given @var{handle}:

@deftypefun {const lt_dlinfo *} lt_dlgetinfo (@w{lt_dlhandle @var{handle}})
Return a pointer to a struct that contains some information about
the module @var{handle}.  The contents of the struct must not be modified.
Return @code{NULL} on failure.
@end deftypefun

Furthermore, in order to save you from having to keep a list of the
handles of all the modules you have loaded, these functions allow you to
iterate over libltdl's list of loaded modules:

@deftp {Type} lt_dlinterface_id
The opaque type used to hold the module interface details for each
registered libltdl client.
@end deftp

@deftp {Type} int lt_dlhandle_interface (@w{lt_dlhandle @var{handle},} @w{const char *@var{id_string}})
Functions of this type are called to check that a handle conforms to a
library's expected module interface when iterating over the global
handle list.  You should be careful to write a callback function of
this type that can correctly identify modules that belong to this
client, both to prevent other clients from accidentally finding your
loaded modules with the iterator functions below, and vice versa.  The
best way to do this is to check that module @var{handle} conforms
to the interface specification of your loader using @code{lt_dlsym}.

The callback may be given @strong{every} module loaded by all the
libltdl module clients in the current address space, including any
modules loaded by other libraries such as libltdl itself, and should
return non-zero if that module does not fulfill the interface
requirements of your loader.

@example
int
my_interface_cb (lt_dlhandle handle, const char *id_string)
@{
  char *(*module_id) (void) = NULL;

  /* @r{A valid my_module must provide all of these symbols.}  */
  if (!((module_id = (char*(*)(void)) lt_dlsym ("module_version"))
        && lt_dlsym ("my_module_entrypoint")))
      return 1;

  if (strcmp (id_string, module_id()) != 0)
      return 1;

  return 0;
@}
@end example
@end deftp

@deftypefun lt_dlinterface_id lt_dlinterface_register (@w{const char *@var{id_string}}, @w{lt_dlhandle_interface *@var{iface}})
Use this function to register your interface validator with libltdl,
and in return obtain a unique key to store and retrieve per-module data.
You supply an @var{id_string} and @var{iface} so that the resulting
@code{lt_dlinterface_id} can be used to filter the module handles
returned by the iteration functions below.  If @var{iface} is @code{NULL},
all modules will be matched.
@end deftypefun

@deftypefun void lt_dlinterface_free (@w{lt_dlinterface_id @var{iface}})
Release the data associated with @var{iface}.
@end deftypefun

@deftypefun int lt_dlhandle_map (@w{lt_dlinterface_id @var{iface}}, @w{int (*@var{func}) (lt_dlhandle @var{handle}, void * @var{data})}, @w{void * @var{data}})
For each module that matches @var{iface}, call the function
@var{func}.  When writing the @var{func} callback function, the
argument @var{handle} is the handle of a loaded module, and
@var{data} is the last argument passed to @code{lt_dlhandle_map}. As
soon as @var{func} returns a non-zero value for one of the handles,
@code{lt_dlhandle_map} will stop calling @var{func} and immediately
return that non-zero value.  Otherwise 0 is eventually returned when
@var{func} has been successfully called for all matching modules.
@end deftypefun

@deftypefun lt_dlhandle lt_dlhandle_iterate (@w{lt_dlinterface_id @var{iface}}, @w{lt_dlhandle @var{place}})
Iterate over the module handles loaded by @var{iface}, returning the
first matching handle in the list if @var{place} is @code{NULL}, and
the next one on subsequent calls.  If @var{place} is the last element
in the list of eligible modules, this function returns @code{NULL}.

@example
lt_dlhandle handle = 0;
lt_dlinterface_id iface = my_interface_id;

while ((handle = lt_dlhandle_iterate (iface, handle)))
  @{
    @dots{}
  @}
@end example
@end deftypefun

@deftypefun lt_dlhandle lt_dlhandle_fetch (@w{lt_dlinterface_id @var{iface}}, @w{const char *@var{module_name}})
Search through the module handles loaded by @var{iface} for a module named
@var{module_name}, returning its handle if found or else @code{NULL}
if no such named module has been loaded by @var{iface}.
@end deftypefun

However, you might still need to maintain your own list of loaded
module handles (in parallel with the list maintained inside libltdl)
if there were any other data that your application wanted to associate
with each open module.  Instead, you can use the following @sc{api}
calls to do that for you.  You must first obtain a unique interface id
from libltdl as described above, and subsequently always use it to
retrieve the data you stored earlier.  This allows different libraries
to each store their own data against loaded modules, without
interfering with one another.

@deftypefun {void *} lt_dlcaller_set_data (@w{lt_dlinterface_id @var{key}}, @w{lt_dlhandle @var{handle}}, @w{void * @var{data}})
Set @var{data} as the set of data uniquely associated with @var{key} and
@var{handle} for later retrieval.  This function returns the @var{data}
previously associated with @var{key} and @var{handle} if any.  A result of
0, may indicate that a diagnostic for the last error (if any) is available
from @code{lt_dlerror()}.

For example, to correctly remove some associated data:

@example
void *stale = lt_dlcaller_set_data (key, handle, 0);
if (stale != NULL)
  @{
    free (stale);
  @}
else
  @{
    char *error_msg = lt_dlerror ();

    if (error_msg != NULL)
      @{
        my_error_handler (error_msg);
        return STATUS_FAILED;
      @}
  @}
@end example
@end deftypefun

@deftypefun {void *} lt_dlcaller_get_data (@w{lt_dlinterface_id @var{key}}, @w{lt_dlhandle @var{handle}})
Return the address of the data associated with @var{key} and
@var{handle}, or else @code{NULL} if there is none.
@end deftypefun

Old versions of libltdl also provided a simpler, but similar, @sc{api}
based around @code{lt_dlcaller_id}.  Unfortunately, it had no
provision for detecting whether a module belonged to a particular
interface as libltdl didn't support multiple loaders in the same
address space at that time.  Those @sc{api}s are no longer supported
as there would be no way to stop clients of the old @sc{api}s from
seeing (and accidentally altering) modules loaded by other libraries.


@node Module loaders for libltdl
@section How to create and register new module loaders

Sometimes libltdl's many ways of gaining access to modules are not
sufficient for the purposes of a project.  You can write your own
loader, and register it with libltdl so that @code{lt_dlopen} will be
able to use it.

Writing a loader involves writing at least three functions that can be
called by @code{lt_dlopen}, @code{lt_dlsym} and @code{lt_dlclose}.
Optionally, you can provide a finalisation function to perform any
cleanup operations when @code{lt_dlexit} executes, and a symbol prefix
string that will be prepended to any symbols passed to @code{lt_dlsym}.
These functions must match the function pointer types below, after
which they can be allocated to an instance of @code{lt_user_dlloader}
and registered.

Registering the loader requires that you choose a name for it, so that it
can be recognised by @code{lt_dlloader_find} and removed with
@code{lt_dlloader_remove}.  The name you choose must be unique, and not
already in use by libltdl's builtin loaders:

@table @asis
@item "dlopen"
The system dynamic library loader, if one exists.
@item "dld"
The @sc{gnu} dld loader, if @file{libdld} was installed when libltdl was
built.
@item "dlpreload"
The loader for @code{lt_dlopen}ing of preloaded static modules.
@end table

The prefix "dl" is reserved for loaders supplied with future versions of
libltdl, so you should not use that for your own loader names.

@noindent
The following types are defined in @file{ltdl.h}:

@deftp {Type} lt_module
@code{lt_module} is a dlloader dependent module.
The dynamic module loader extensions communicate using these low
level types.
@end deftp

@deftp {Type} lt_dlloader
@code{lt_dlloader} is a handle for module loader types.
@end deftp

@deftp {Type} lt_user_data
@code{lt_user_data} is used for specifying loader instance data.
@end deftp

@deftypefn {Type} {struct} lt_user_dlloader @{@w{const char *@var{sym_prefix};} @w{lt_module_open *@var{module_open};} @w{lt_module_close *@var{module_close};} @w{lt_find_sym *@var{find_sym};} @w{lt_dlloader_exit *@var{dlloader_exit};} @}
If you want to define a new way to open dynamic modules, and have the
@code{lt_dlopen} @sc{api} use it, you need to instantiate one of these
structures and pass it to @code{lt_dlloader_add}.  You can pass whatever
you like in the @var{dlloader_data} field, and it will be passed back as
the value of the first parameter to each of the functions specified in
the function pointer fields.
@end deftypefn

@deftypefn {Type} lt_module lt_module_open (@w{const char *@var{filename}})
The type of the loader function for an @code{lt_dlloader} module
loader.  The value set in the dlloader_data field of the @code{struct
lt_user_dlloader} structure will be passed into this function in the
@var{loader_data} parameter.  Implementation of such a function should
attempt to load the named module, and return an @code{lt_module}
suitable for passing in to the associated @code{lt_module_close} and
@code{lt_sym_find} function pointers.  If the function fails it should
return @code{NULL}, and set the error message with @code{lt_dlseterror}.
@end deftypefn

@deftypefn {Type} int lt_module_close (@w{lt_user_data @var{loader_data},} @w{lt_module @var{module}})
The type of the unloader function for a user defined module loader.
Implementation of such a function should attempt to release
any resources tied up by the @var{module} module, and then unload it
from memory.  If the function fails for some reason, set the error
message with @code{lt_dlseterror} and return non-zero.
@end deftypefn

@deftypefn {Type} {void *} lt_find_sym (@w{lt_module @var{module},} @w{const char *@var{symbol}})
The type of the symbol lookup function for a user defined module loader.
Implementation of such a function should return the address of the named
@var{symbol} in the module @var{module}, or else set the error message
with @code{lt_dlseterror} and return @code{NULL} if lookup fails.
@end deftypefn

@deftypefn {Type} int lt_dlloader_exit (@w{lt_user_data @var{loader_data}})
The type of the finalisation function for a user defined module loader.
Implementation of such a function should free any resources associated
with the loader, including any user specified data in the
@code{dlloader_data} field of the @code{lt_user_dlloader}.  If non-@code{NULL},
the function will be called by @code{lt_dlexit}, and
@code{lt_dlloader_remove}.
@end deftypefn

For example:

@example
int
register_myloader (void)
@{
  lt_user_dlloader dlloader;

  /* User modules are responsible for their own initialisation. */
  if (myloader_init () != 0)
    return MYLOADER_INIT_ERROR;

  dlloader.sym_prefix    = NULL;
  dlloader.module_open   = myloader_open;
  dlloader.module_close  = myloader_close;
  dlloader.find_sym      = myloader_find_sym;
  dlloader.dlloader_exit = myloader_exit;
  dlloader.dlloader_data = (lt_user_data)myloader_function;

  /* Add my loader as the default module loader. */
  if (lt_dlloader_add (lt_dlloader_next (NULL), &dlloader, "myloader") != 0)
    return ERROR;

  return OK;
@}
@end example

Note that if there is any initialisation required for the loader,
it must be performed manually before the loader is registered --
libltdl doesn't handle user loader initialisation.

Finalisation @emph{is} handled by libltdl however, and it is important
to ensure the @code{dlloader_exit} callback releases any resources claimed
during the initialisation phase.

@page
@noindent
libltdl provides the following functions for writing your own module
loaders:

@deftypefun int lt_dlloader_add (@w{lt_dlloader *@var{place},} @w{lt_user_dlloader *@var{dlloader},} @w{const char *@var{loader_name}})
Add a new module loader to the list of all loaders, either as the
last loader (if @var{place} is @code{NULL}), else immediately before the
loader passed as @var{place}.  @var{loader_name} will be returned by
@code{lt_dlloader_name} if it is subsequently passed a newly
registered loader.  These @var{loader_name}s must be unique, or
@code{lt_dlloader_remove} and @code{lt_dlloader_find} cannot
work.  Returns 0 for success.

@example
/* Make myloader be the last one. */
if (lt_dlloader_add (NULL, myloader) != 0)
  perror (lt_dlerror ());
@end example
@end deftypefun

@deftypefun int lt_dlloader_remove (@w{const char *@var{loader_name}})
Remove the loader identified by the unique name, @var{loader_name}.
Before this can succeed, all modules opened by the named loader must
have been closed.  Returns 0 for success, otherwise an error message can
be obtained from @code{lt_dlerror}.

@example
/* Remove myloader. */
if (lt_dlloader_remove ("myloader") != 0)
  perror (lt_dlerror ());
@end example
@end deftypefun

@deftypefun {lt_dlloader *}lt_dlloader_next (@w{lt_dlloader *@var{place}})
Iterate over the module loaders, returning the first loader if @var{place} is
@code{NULL}, and the next one on subsequent calls.  The handle is for use with
@code{lt_dlloader_add}.

@example
/* Make myloader be the first one. */
if (lt_dlloader_add (lt_dlloader_next (NULL), myloader) != 0)
  return ERROR;
@end example
@end deftypefun

@deftypefun {lt_dlloader *}lt_dlloader_find (@w{const char *@var{loader_name}})
Return the first loader with a matching @var{loader_name} identifier, or else
@code{NULL}, if the identifier is not found.

The identifiers that may be used by libltdl itself, if the host
architecture supports them are @dfn{dlopen}@footnote{This is used for
the host dependent module loading @sc{api} -- @code{shl_load} and
@code{LoadLibrary} for example}, @dfn{dld} and @dfn{dlpreload}.

@example
/* Add a user loader as the next module loader to be tried if
   the standard dlopen loader were to fail when lt_dlopening. */
if (lt_dlloader_add (lt_dlloader_find ("dlopen"), myloader) != 0)
  return ERROR;
@end example
@end deftypefun

@deftypefun {const char *}lt_dlloader_name (@w{lt_dlloader *@var{place}})
Return the identifying name of @var{PLACE}, as obtained from
@code{lt_dlloader_next} or @code{lt_dlloader_find}.  If this function fails,
it will return @code{NULL} and set an error for retrieval with
@code{lt_dlerror}.
@end deftypefun

@deftypefun {lt_user_data *}lt_dlloader_data (@w{lt_dlloader *@var{place}})
Return the address of the @code{dlloader_data} of @var{PLACE}, as
obtained from @code{lt_dlloader_next} or @code{lt_dlloader_find}.  If
this function fails, it will return @code{NULL} and set an error for
retrieval with @code{lt_dlerror}.
@end deftypefun

@subsection Error handling within user module loaders

@deftypefun int lt_dladderror (@w{const char *@var{diagnostic}})
This function allows you to integrate your own error messages into
@code{lt_dlerror}.  Pass in a suitable diagnostic message for return by
@code{lt_dlerror}, and an error identifier for use with
@code{lt_dlseterror} is returned.

If the allocation of an identifier fails, this function returns -1.

@example
int myerror = lt_dladderror ("Doh!");
if (myerror < 0)
  perror (lt_dlerror ());
@end example
@end deftypefun

@deftypefun int lt_dlseterror (@w{int @var{errorcode}})
When writing your own module loaders, you should use this function to
raise errors so that they are propagated through the @code{lt_dlerror}
interface.  All of the standard errors used by libltdl are declared in
@file{ltdl.h}, or you can add more of your own with
@code{lt_dladderror}.  This function returns 0 on success.

@example
if (lt_dlseterror (LTDL_ERROR_NO_MEMORY) != 0)
  perror (lt_dlerror ());
@end example
@end deftypefun

@node Distributing libltdl
@section How to distribute libltdl with your package

Even though libltdl is installed together with libtool, you may wish
to include libltdl in the distribution of your package, for the
convenience of users of your package that don't have libtool or
libltdl installed, or if you are using features of a very new version
of libltdl that you don't expect your users to have yet.  In such
cases, you must decide which flavor of libltdl you want to use: a
convenience library or an installable libtool library.

The most simplistic way to add @code{libltdl} to your package is to
copy all the @file{libltdl} source files to a subdirectory within
your package and to build and link them along with the rest of your
sources.  To help you do this, the m4 macros for Autoconf are
available in @file{ltdl.m4}.  You must ensure that they are available
in @file{aclocal.m4} before you run Autoconf@footnote{@c
@c
We used to recommend adding the contents of @file{ltdl.m4} to
@file{acinclude.m4}, but with @command{aclocal} from a modern
Automake (1.8 or newer) and this release of libltdl that is not only
unnecessary but makes it easy to forget to upgrade @file{acinclude.m4}
if you move to a different release of libltdl.
@c
}.  Having made the macros available, you must add a call to the
@samp{LTDL_INIT} macro (after the call to @samp{LT_INIT}
to your package's @file{configure.ac} to
perform the configure time checks required to build the library
correctly.  Unfortunately, this method has problems if you then try to
link the package binaries with an installed libltdl, or a library that
depends on libltdl, because of the duplicate symbol definitions.  For
example, ultimately linking against two different versions of libltdl,
or against both a local convenience library and an installed libltdl
is bad.  Ensuring that only one copy of the libltdl sources are linked
into any program is left as an exercise for the reader.

@defmac LT_CONFIG_LTDL_DIR (@var{DIRECTORY})
Declare @var{DIRECTORY} to be the location of the @code{libltdl}
source files, for @command{libtoolize --ltdl} to place
them. @xref{Invoking libtoolize}, for more details.  Provided that you
add an appropriate @code{LT_CONFIG_LTDL_DIR} call in your
@file{configure.ac} before calling @command{libtoolize}, the
appropriate @code{libltdl} files will be installed automatically.
@end defmac

@defmac LTDL_INIT (@var{OPTIONS})
@defmacx LT_WITH_LTDL
@defmacx AC_WITH_LTDL
@code{AC_WITH_LTDL} and @code{LT_WITH_LTDL} are deprecated names for
older versions of this macro; @command{autoupdate} will update your
@file{configure.ac} file.

This macro adds the following options to the @command{configure}
script:

@table @option
@item --with-ltdl-include @var{INSTALLED-LTDL-HEADER-DIR}
The @code{LTDL_INIT} macro will look in the standard header file
locations to find the installed @code{libltdl} headers.  If
@code{LTDL_INIT} can't find them by itself, the person who builds
your package can use this option to tell @command{configure} where
the installed @code{libltdl} headers are.

@item --with-ltdl-lib @var{INSTALLED-LTDL-LIBRARY-DIR}
Similarly, the person building your package can use this option to
help @command{configure} find the installed @file{libltdl.la}.

@item --with-included-ltdl
If there is no installed @code{libltdl}, or in any case if the
person building your package would rather use the @code{libltdl}
sources shipped with the package in the subdirectory named by
@code{LT_CONFIG_LTDL_DIR}, they should pass this option to
@command{configure}.
@end table

If the @option{--with-included-ltdl} is not passed at
configure time, and an installed @code{libltdl} is not
found@footnote{@c
@c
Even if libltdl is installed, @samp{LTDL_INIT} may fail
to detect it if libltdl depends on symbols provided by libraries
other than the C library.
@c
}, then @command{configure} will exit immediately with an error that
asks the user to either specify the location of an installed
@code{libltdl} using the @option{--with-ltdl-include} and
@option{--with-ltdl-lib} options, or to build with the
@code{libltdl} sources shipped with the package by passing
@option{--with-included-ltdl}.

If an installed @code{libltdl} is found, then @code{LIBLTDL} is set to
the link flags needed to use it, and @code{LTDLINCL} to the preprocessor
flags needed to find the installed headers, and @code{LTDLDEPS} will
be empty.  Note, however, that no version checking is performed.  You
should manually check for the @code{libltdl} features you need in
@file{configure.ac}:

@example
LT_INIT([dlopen])
LTDL_INIT

# The lt_dladvise_init symbol was added with libtool-2.2
if test "x$with_included_ltdl" != "xyes"; then
  save_CFLAGS="$CFLAGS"
  save_LDFLAGS="$LDFLAGS"
  CFLAGS="$CFLAGS $LTDLINCL"
  LDFLAGS="$LDFLAGS $LIBLTDL"
  AC_CHECK_LIB([ltdl], [lt_dladvise_init],
                [],
        [AC_MSG_ERROR([installed libltdl is too old])])
  LDFLAGS="$save_LDFLAGS"
  CFLAGS="$save_CFLAGS"
fi
@end example

@var{OPTIONS} may include no more than one of the following build
modes depending on how you want your project to build @code{libltdl}:
@samp{nonrecursive}, @samp{recursive}, or @samp{subproject}.  In order
for @command{libtoolize} to detect this option correctly, if you
supply one of these arguments, they must be given literally (i.e.,
macros or shell variables that expand to the correct ltdl mode will not
work).

@table @samp
@item nonrecursive
This is how the Libtool project distribution builds the @code{libltdl}
we ship and install.  If you wish to use Automake to build
@code{libltdl} without invoking a recursive make to descend into the
@code{libltdl} subdirectory, then use this option.  You will need to set
your configuration up carefully to make this work properly, and you will
need releases of Autoconf and Automake that support
@code{subdir-objects} and @code{LIBOBJDIR} properly.  In your
@file{configure.ac}, add:

@example
AM_INIT_AUTOMAKE([subdir-objects])
AC_CONFIG_HEADERS([config.h])
LT_CONFIG_LTDL_DIR([libltdl])
LT_INIT([dlopen])
LTDL_INIT([nonrecursive])
@end example

@noindent
You @emph{have to} use a config header, but it may have a name different
than @file{config.h}.

Also, add the following near the top of your @file{Makefile.am}:

@example
AM_CPPFLAGS =
AM_LDFLAGS =

BUILT_SOURCES =
EXTRA_DIST =
CLEANFILES =
MOSTLYCLEANFILES =

include_HEADERS =
noinst_LTLIBRARIES =
lib_LTLIBRARIES =
EXTRA_LTLIBRARIES =

include libltdl/Makefile.inc
@end example

@noindent
Unless you build no other libraries from this @file{Makefile.am},
you will also need to change @code{lib_LTLIBRARIES} to assign with
@samp{+=} so that the @code{libltdl} targets declared in
@file{Makefile.inc} are not overwritten.

@item recursive
This build mode still requires that you use Automake, but (in contrast
with @samp{nonrecursive}) uses the more usual device of starting another
@code{make} process in the @file{libltdl} subdirectory.  To use this
mode, you should add to your @file{configure.ac}:

@example
AM_INIT_AUTOMAKE
AC_CONFIG_HEADERS([config.h])
LT_CONFIG_LTDL_DIR([libltdl])
LT_INIT([dlopen])
LTDL_INIT([recursive])
AC_CONFIG_FILES([libltdl/Makefile])
@end example

@noindent
Again, you @emph{have to} use a config header, but it may have a name
different than @file{config.h} if you like.

Also, add this to your @file{Makefile.am}:

@example
SUBDIRS = libltdl
@end example

@item subproject
This mode is the default unless you explicitly add @code{recursive} or
@code{nonrecursive} to your @code{LTDL_INIT} options;  @code{subproject}
is the only mode supported by previous releases of libltdl.  Even if you
do not use Autoconf in the parent project, then, in @samp{subproject}
mode, still @code{libltdl} contains all the necessary files to configure
and build itself -- you just need to arrange for your build system to
call @file{libltdl/configure} with appropriate options, and then run
@code{make} in the @code{libltdl} subdirectory.

If you @emph{are} using Autoconf and Automake, then you will need to add
the following to your @file{configure.ac}:

@example
LT_CONFIG_LTDL_DIR([libltdl])
LTDL_INIT
@end example

@noindent
and to @file{Makefile.am}:

@example
SUBDIRS = libltdl
@end example
@end table

Aside from setting the libltdl build mode, there are other keywords
that you can pass to @code{LTDL_INIT} to modify its behavior when
@option{--with-included-ltdl} has been given:

@table @samp
@item convenience
This is the default unless you explicitly add @code{installable} to
your @code{LTDL_INIT} options.

This keyword will cause options to be passed to the @command{configure}
script in the subdirectory named by @code{LT_CONFIG_LTDL_DIR} in order
to cause it to be built as a convenience library.  If you're not
using automake, you will need to define @code{top_build_prefix},
@code{top_builddir}, and @code{top_srcdir} in your makefile so that
@code{LIBLTDL}, @code{LTDLDEPS}, and @code{LTDLINCL} expand correctly.

One advantage of the convenience library is that it is not installed,
so the fact that you use @code{libltdl} will not be apparent to the
user, and it won't overwrite a pre-installed version of
@code{libltdl} the system might already have in the installation
directory.  On the other hand, if you want to upgrade @code{libltdl}
for any reason (e.g.@: a bugfix) you'll have to recompile your package
instead of just replacing the shared installed version of
@code{libltdl}.  However, if your programs or libraries are linked
with other libraries that use such a pre-installed version of
@code{libltdl}, you may get linker errors or run-time crashes.
Another problem is that you cannot link the convenience library into
more than one libtool library, then link a single program with those
libraries, because you may get duplicate symbols.  In general you can
safely use the convenience library in programs that don't depend on
other libraries that might use @code{libltdl} too.

@item installable
This keyword will pass options to the @command{configure}
script in the subdirectory named by @code{LT_CONFIG_LTDL_DIR} in order
to cause it to be built as an installable library.  If you're not
using automake, you will need to define @code{top_build_prefix},
@code{top_builddir} and @code{top_srcdir} in your makefile so that
@code{LIBLTDL}, @code{LTDLDEPS}, and @code{LTDLINCL} are expanded
properly.

Be aware that you could overwrite another @code{libltdl} already
installed to the same directory if you use this option.
@end table
@end defmac

Whatever method you use, @samp{LTDL_INIT} will define the shell variable
@var{LIBLTDL} to the link flag that you should use to link with
@code{libltdl}, the shell variable @var{LTDLDEPS} to the files that
can be used as a dependency in @file{Makefile} rules, and the shell
variable @var{LTDLINCL} to the preprocessor flag that you should use to
compile programs that include @file{ltdl.h}. So, when you want to link a
program with libltdl, be it a convenience, installed or installable
library, just use @samp{$(LTDLINCL)} for preprocessing and compilation,
and @samp{$(LIBLTDL)} for linking.

@itemize @bullet
@item
If your package is built using an installed version of @code{libltdl},
@var{LIBLTDL} will be set to the compiler flags needed to link against
the installed library, @var{LTDLDEPS} will be empty, and @var{LTDLINCL}
will be set to the compiler flags needed to find the @code{libltdl}
header files.

@item
If your package is built using the convenience libltdl, @var{LIBLTDL}
and @var{LTDLDEPS} will be the pathname for the convenience version of
libltdl (starting with @samp{$@{top_builddir@}/} or
@samp{$@{top_build_prefix@}}) and @var{LTDLINCL} will be @option{-I}
followed by the directory that contains @file{ltdl.h} (starting with
@samp{$@{top_srcdir@}/}).

@item
If an installable version of the included @code{libltdl} is being
built, its pathname starting with @samp{$@{top_builddir@}/} or
@samp{$@{top_build_prefix@}}, will be stored in @var{LIBLTDL} and
@var{LTDLDEPS}, and @var{LTDLINCL} will be set just like in the case of
convenience library.
@end itemize

You should probably also use the @samp{dlopen} option to @code{LT_INIT}
in your @file{configure.ac}, otherwise libtool will assume no dlopening
mechanism is supported, and revert to dlpreopening, which is probably not
what you want.  Avoid using the @option{-static},
@option{-static-libtool-libs}, or @option{-all-static}
switches when linking programs with libltdl.  This will not work on
all platforms, because the dlopening functions may not be available
for static linking.

The following example shows you how to embed an installable libltdl in
your package.  In order to use the convenience variant, just replace the
@code{LTDL_INIT} option @samp{installable} with @samp{convenience}.  We
assume that libltdl was embedded using @samp{libtoolize --ltdl}.

configure.ac:
@example
...
# Name the subdirectory that contains libltdl sources
LT_CONFIG_LTDL_DIR([libltdl])

# Configure libtool with dlopen support if possible
LT_INIT([dlopen])

# Enable building of the installable libltdl library
LTDL_INIT([installable])
...
@end example

Makefile.am:
@example
...
SUBDIRS = libltdl

AM_CPPFLAGS = $(LTDLINCL)

myprog_LDFLAGS = -export-dynamic
myprog_LDADD = $(LIBLTDL) -dlopen self -dlopen foo1.la
myprog_DEPENDENCIES = $(LTDLDEPS) foo1.la
...
@end example

@defmac LTDL_INSTALLABLE
@defmacx AC_LIBLTDL_INSTALLABLE
These macros are deprecated, the @samp{installable} option to
@code{LTDL_INIT} should be used instead.
@end defmac

@defmac LTDL_CONVENIENCE
@defmacx AC_LIBLTDL_CONVENIENCE
These macros are deprecated, the @samp{convenience} option to
@code{LTDL_INIT} should be used instead.
@end defmac


@node Trace interface
@chapter Libtool's trace interface
@cindex trace interface
@cindex autoconf traces

This section describes macros whose sole purpose is to be traced using
Autoconf's @option{--trace} option (@pxref{autoconf Invocation, , The
Autoconf Manual, autoconf, The Autoconf Manual}) to query the Libtool
configuration of a project.  These macros are called by Libtool
internals and should never be called by user code; they should only be
traced.

@defmac LT_SUPPORTED_TAG (@var{tag})
This macro is called once for each language enabled in the package.  Its
only argument, @var{tag}, is the tag-name corresponding to the language
(@pxref{Tags}).

You can therefore retrieve the list of all tags enabled in a project
using the following command:
@example
autoconf --trace 'LT_SUPPORTED_TAG:$1'
@end example
@end defmac


@node Troubleshooting
@chapter Troubleshooting
@cindex troubleshooting
@cindex problems, solving
@cindex solving problems
@cindex problems, blaming somebody else for

Libtool is under constant development, changing to remain up-to-date
with modern operating systems.  If libtool doesn't work the way you
think it should on your platform, you should read this chapter to help
determine what the problem is, and how to resolve it.

@menu
* Libtool test suite::          Libtool's self-tests.
* Reporting bugs::              How to report problems with libtool.
@end menu

@node Libtool test suite
@section The libtool test suite
@cindex test suite

Libtool comes with two integrated sets of tests to check that your build
is sane, that test its capabilities, and report obvious bugs in the
libtool program.  These tests, too, are constantly evolving, based on
past problems with libtool, and known deficiencies in other operating
systems.

As described in the @file{README} file, you may run @kbd{make -k check}
after you have built libtool (possibly before you install it) in order
to make sure that it meets basic functional requirements.

@menu
* Test descriptions::           The contents of the old test suite.
* When tests fail::             What to do when a test fails.
@end menu

@node Test descriptions
@subsection Description of test suite

Here is a list of the current programs in the old test suite, and what
they test for:

@table @file

@item cdemo-conf.test
@itemx cdemo-exec.test
@itemx cdemo-make.test
@itemx cdemo-static.test
@itemx cdemo-shared.test
@itemx cdemo-undef.test
@pindex cdemo-conf.test
@pindex cdemo-exec.test
@pindex cdemo-make.test
@pindex cdemo-static.test
@pindex cdemo-shared.test
@pindex cdemo-undef.test
These programs check to see that the @file{tests/cdemo} subdirectory of
the libtool distribution can be configured and built correctly.

The @file{tests/cdemo} subdirectory contains a demonstration of libtool
convenience libraries, a mechanism that allows build-time static
libraries to be created, in a way that their components can be later
linked into programs or other libraries, even shared ones.

The tests @file{cdemo-make.test} and @file{cdemo-exec.test} are executed
three times, under three different libtool configurations:
@file{cdemo-conf.test} configures @file{cdemo/libtool} to build both
static and shared libraries (the default for platforms that support
both), @file{cdemo-static.test} builds only static libraries
(@samp{--disable-shared}), and @file{cdemo-shared.test} builds only
shared libraries (@samp{--disable-static}).

The test @file{cdemo-undef.test} tests the generation of shared
libraries with undefined symbols on systems that allow this.

@item demo-conf.test
@itemx demo-exec.test
@itemx demo-inst.test
@itemx demo-make.test
@itemx demo-unst.test
@itemx demo-static.test
@itemx demo-shared.test
@itemx demo-nofast.test
@itemx demo-pic.test
@itemx demo-nopic.test
@pindex demo-conf.test
@pindex demo-exec.test
@pindex demo-inst.test
@pindex demo-make.test
@pindex demo-unst.test
@pindex demo-static.test
@pindex demo-shared.test
@pindex demo-nofast.test
@pindex demo-pic.test
@pindex demo-nopic.test
These programs check to see that the @file{tests/demo} subdirectory of
the libtool distribution can be configured, built, installed, and
uninstalled correctly.

The @file{tests/demo} subdirectory contains a demonstration of a trivial
package that uses libtool.  The tests @file{demo-make.test},
@file{demo-exec.test}, @file{demo-inst.test} and
@file{demo-unst.test} are executed four times, under four different
libtool configurations: @file{demo-conf.test} configures
@file{demo/libtool} to build both static and shared libraries,
@file{demo-static.test} builds only static libraries
(@option{--disable-shared}), and @file{demo-shared.test} builds only
shared libraries (@option{--disable-static}).
@file{demo-nofast.test} configures @file{demo/libtool} to
disable the fast-install mode (@option{--enable-fast-install=no}).
@file{demo-pic.test} configures @file{demo/libtool} to
prefer building @sc{pic} code (@option{--with-pic}), @file{demo-nopic.test}
to prefer non-@sc{pic} code (@option{--without-pic}).

@item demo-deplibs.test
@pindex demo-deplibs.test
Many systems cannot link static libraries into shared libraries.
libtool uses a @code{deplibs_check_method} to prevent such cases.
This tests checks whether libtool's @code{deplibs_check_method}
works properly.

@item demo-hardcode.test
@pindex demo-hardcode.test
On all systems with shared libraries, the location of the library can be
encoded in executables that are linked against it @pxref{Linking
executables}.  This test checks the conditions under which your system
linker hardcodes the library location, and guarantees that they
correspond to libtool's own notion of how your linker behaves.

@item demo-relink.test
@itemx depdemo-relink.test
@pindex demo-relink.test
@pindex depdemo-relink.test
These tests check whether variable @var{shlibpath_overrides_runpath} is
properly set.  If the test fails and @var{VERBOSE} is set, it will
indicate what the variable should have been set to.

@item demo-noinst-link.test
@pindex demo-noinst-link.test
Checks whether libtool will not try to link with a previously installed
version of a library when it should be linking with a just-built one.

@item depdemo-conf.test
@itemx depdemo-exec.test
@itemx depdemo-inst.test
@itemx depdemo-make.test
@itemx depdemo-unst.test
@itemx depdemo-static.test
@itemx depdemo-shared.test
@itemx depdemo-nofast.test
@pindex depdemo-conf.test
@pindex depdemo-exec.test
@pindex depdemo-inst.test
@pindex depdemo-make.test
@pindex depdemo-unst.test
@pindex depdemo-static.test
@pindex depdemo-shared.test
@pindex depdemo-nofast.test
These programs check to see that the @file{tests/depdemo} subdirectory
of the libtool distribution can be configured, built, installed, and
uninstalled correctly.

The @file{tests/depdemo} subdirectory contains a demonstration of
inter-library dependencies with libtool.  The test programs link some
interdependent libraries.

The tests @file{depdemo-make.test}, @file{depdemo-exec.test},
@file{depdemo-inst.test} and @file{depdemo-unst.test} are executed
four times, under four different libtool configurations:
@file{depdemo-conf.test} configures @file{depdemo/libtool} to build both
static and shared libraries, @file{depdemo-static.test} builds only static
libraries (@option{--disable-shared}), and @file{depdemo-shared.test} builds
only shared libraries (@option{--disable-static}).
@file{depdemo-nofast.test} configures @file{depdemo/libtool} to
disable the fast-install mode (@option{--enable-fast-install=no}.

@item mdemo-conf.test
@itemx mdemo-exec.test
@itemx mdemo-inst.test
@itemx mdemo-make.test
@itemx mdemo-unst.test
@itemx mdemo-static.test
@itemx mdemo-shared.test
@pindex mdemo-conf.test
@pindex mdemo-exec.test
@pindex mdemo-inst.test
@pindex mdemo-make.test
@pindex mdemo-unst.test
@pindex mdemo-static.test
@pindex mdemo-shared.test
These programs check to see that the @file{tests/mdemo} subdirectory of
the libtool distribution can be configured, built, installed, and
uninstalled correctly.

The @file{tests/mdemo} subdirectory contains a demonstration of a
package that uses libtool and the system independent dlopen wrapper
@file{libltdl} to load modules.  The library @file{libltdl} provides a
dlopen wrapper for various platforms (Linux, Solaris, HP/UX etc.)
including support for dlpreopened modules (@pxref{Dlpreopening}).

The tests @file{mdemo-make.test}, @file{mdemo-exec.test},
@file{mdemo-inst.test} and @file{mdemo-unst.test} are executed
three times, under three different libtool configurations:
@file{mdemo-conf.test} configures @file{mdemo/libtool} to build both
static and shared libraries, @file{mdemo-static.test} builds only static
libraries (@option{--disable-shared}), and @file{mdemo-shared.test} builds
only shared libraries (@option{--disable-static}).

@item mdemo-dryrun.test
@pindex mdemo-dryrun.test
This test checks whether libtool's @option{--dry-run} mode works properly.

@item mdemo2-conf.test
@itemx mdemo2-exec.test
@itemx mdemo2-make.test
@pindex mdemo2-conf.test
@pindex mdemo2-exec.test
@pindex mdemo2-make.test
These programs check to see that the @file{tests/mdemo2} subdirectory of
the libtool distribution can be configured, built, and executed
correctly.

The @file{tests/mdemo2} directory contains a demonstration of a package
that attempts to link with a library (from the @file{tests/mdemo}
directory) that itself does dlopening of libtool modules.

@item link.test
@pindex link.test
This test guarantees that linking directly against a non-libtool static
library works properly.

@item link-2.test
@pindex link-2.test
This test makes sure that files ending in @samp{.lo} are never linked
directly into a program file.

@item nomode.test
@pindex nomode.test
Check whether we can actually get help for libtool.

@item objectlist.test
@pindex objectlist.test
Check that a nonexistent objectlist file is properly detected.

@item pdemo-conf.test
@itemx pdemo-exec.test
@itemx pdemo-inst.test
@itemx pdemo-make.test
@pindex pdemo-conf.test
@pindex pdemo-exec.test
@pindex pdemo-inst.test
@pindex pdemo-make.test
These programs check to see that the @file{tests/pdemo} subdirectory of
the libtool distribution can be configured, built, and executed
correctly.

The @file{pdemo-conf.test} lowers the @var{max_cmd_len} variable in the
generated libtool script to test the measures to evade command line
length limitations.

@item quote.test
@pindex quote.test
This program checks libtool's metacharacter quoting.

@item sh.test
@pindex sh.test
Checks for some nonportable or dubious or undesired shell constructs in
shell scripts.

@item suffix.test
@pindex suffix.test
When other programming languages are used with libtool (@pxref{Other
languages}), the source files may end in suffixes other than @samp{.c}.
This test validates that libtool can handle suffixes for all the file
types that it supports, and that it fails when the suffix is invalid.

@item tagdemo-conf.test
@itemx tagdemo-exec.test
@itemx tagdemo-make.test
@itemx tagdemo-static.test
@itemx tagdemo-shared.test
@itemx tagdemo-undef.test
@pindex tagdemo-conf.test
@pindex tagdemo-exec.test
@pindex tagdemo-make.test
@pindex tagdemo-static.test
@pindex tagdemo-shared.test
@pindex tagdemo-undef.test
These programs check to see that the @file{tests/tagdemo} subdirectory
of the libtool distribution can be configured, built, and executed
correctly.

The @file{tests/tagdemo} directory contains a demonstration of a package
that uses libtool's multi-language support through configuration tags.
It generates a library from C++ sources, which is then linked to a C++
program.

@item f77demo-conf.test
@itemx f77demo-exec.test
@itemx f77demo-make.test
@itemx f77demo-static.test
@itemx f77demo-shared.test
@pindex f77demo-conf.test
@pindex f77demo-exec.test
@pindex f77demo-make.test
@pindex f77demo-static.test
@pindex f77demo-shared.test
These programs check to see that the @file{tests/f77demo} subdirectory
of the libtool distribution can be configured, built, and executed
correctly.

The @file{tests/f77demo} tests test Fortran 77 support in libtool by
creating libraries from Fortran 77 sources, and mixed Fortran and C
sources, and a Fortran 77 program to use the former library, and a C
program to use the latter library.

@item fcdemo-conf.test
@itemx fcdemo-exec.test
@itemx fcdemo-make.test
@itemx fcdemo-static.test
@itemx fcdemo-shared.test
@pindex fcdemo-conf.test
@pindex fcdemo-exec.test
@pindex fcdemo-make.test
@pindex fcdemo-static.test
@pindex fcdemo-shared.test
These programs check to see that the @file{tests/fcdemo} subdirectory
of the libtool distribution can be configured, built, and executed
correctly.

The @file{tests/fcdemo} is similar to the @file{tests/f77demo}
directory, except that Fortran 90 is used in combination with the
@samp{FC} interface provided by Autoconf and Automake.

@end table

@node When tests fail
@subsection When tests fail
@cindex failed tests
@cindex tests, failed

Each of the tests in the old test suite are designed to produce no
output when they are run via @kbd{make check}.  The exit status of each
program tells the @file{Makefile} whether or not the test succeeded.

If a test fails, it means that there is either a programming error in
libtool, or in the test program itself.

To investigate a particular test, you may run it directly, as you would
a normal program.  When the test is invoked in this way, it produces
output that may be useful in determining what the problem is.

Another way to have the test programs produce output is to set the
@var{VERBOSE} environment variable to @samp{yes} before running them.
For example, @kbd{env VERBOSE=yes make check} runs all the tests, and
has each of them display debugging information.

The new, Autotest-based test suite produces as output a file
@file{tests/testsuite.log} which contains information about failed
tests.

You can pass options to the test suite through the @command{make}
variable @var{TESTSUITEFLAGS} (@pxref{testsuite Invocation, ,
The Autoconf Manual, autoconf, The Autoconf Manual}).


@node Reporting bugs
@section Reporting bugs
@cindex bug reports
@cindex reporting bugs
@cindex problem reports

If you think you have discovered a bug in libtool, you should think
twice: the libtool maintainer is notorious for passing the buck (or
maybe that should be ``passing the bug'').  Libtool was invented to fix
known deficiencies in shared library implementations, so, in a way, most
of the bugs in libtool are actually bugs in other operating systems.
However, the libtool maintainer would definitely be happy to add support
for somebody else's buggy operating system.  [I wish there was a good
way to do winking smiley-faces in Texinfo.]

Genuine bugs in libtool include problems with shell script portability,
documentation errors, and failures in the test suite (@pxref{Libtool
test suite}).

First, check the documentation and help screens to make sure that the
behaviour you think is a problem is not already mentioned as a feature.

Then, you should read the Emacs guide to reporting bugs (@pxref{Bugs, ,
Reporting Bugs, emacs, The Emacs Manual}).  Some of the details
listed there are specific to Emacs, but the principle behind them is a
general one.

Finally, send a bug report to @value{BUGADDR} with any appropriate
@emph{facts}, such as test suite output (@pxref{When tests fail}), all
the details needed to reproduce the bug, and a brief description of why
you think the behaviour is a bug.  Be sure to include the word
``libtool'' in the subject line, as well as the version number you are
using (which can be found by typing @kbd{libtool --version}).

@node Maintaining
@chapter Maintenance notes for libtool

This chapter contains information that the libtool maintainer finds
important.  It will be of no use to you unless you are considering
porting libtool to new systems, or writing your own libtool.

@menu
* New ports::                   How to port libtool to new systems.
* Tested platforms::            When libtool was last tested.
* Platform quirks::             Information about different library systems.
* libtool script contents::     Configuration information that libtool uses.
* Cheap tricks::                Making libtool maintainership easier.
@end menu

@node New ports
@section Porting libtool to new systems

Before you embark on porting libtool to an unsupported system, it is
worthwhile to send e-mail to @value{MAILLIST}, to make sure that you are
not duplicating existing work.

If you find that any porting documentation is missing, please complain!
Complaints with patches and improvements to the documentation, or to
libtool itself, are more than welcome.

@menu
* Information sources::         Where to find relevant documentation
* Porting inter-library dependencies::  Implementation details explained
@end menu

@node Information sources
@subsection Information sources

Once it is clear that a new port is necessary, you'll generally need the
following information:

@table @asis
@item canonical system name
You need the output of @code{config.guess} for this system, so that you
can make changes to the libtool configuration process without affecting
other systems.

@item man pages for @command{ld} and @command{cc}
These generally describe what flags are used to generate @sc{pic}, to create
shared libraries, and to link against only static libraries.  You may
need to follow some cross references to find the information that is
required.

@item man pages for @command{ld.so}, @command{rtld}, or equivalent
These are a valuable resource for understanding how shared libraries are
loaded on the system.

@item man page for @command{ldconfig}, or equivalent
This page usually describes how to install shared libraries.

@item output from @kbd{ls -l /lib /usr/lib}
This shows the naming convention for shared libraries on the system,
including which names should be symbolic links.

@item any additional documentation
Some systems have special documentation on how to build and install
shared libraries.
@end table

If you know how to program the Bourne shell, then you can complete the
port yourself; otherwise, you'll have to find somebody with the relevant
skills who will do the work.  People on the libtool mailing list are
usually willing to volunteer to help you with new ports, so you can send
the information to them.

To do the port yourself, you'll definitely need to modify the
@code{libtool.m4} macros in order to make platform-specific changes to
the configuration process.  You should search that file for the
@code{PORTME} keyword, which will give you some hints on what you'll
need to change.  In general, all that is involved is modifying the
appropriate configuration variables (@pxref{libtool script contents}).

Your best bet is to find an already-supported system that is similar to
yours, and make your changes based on that.  In some cases, however,
your system will differ significantly from every other supported system,
and it may be necessary to add new configuration variables, and modify
the @code{ltmain.in} script accordingly.  Be sure to write to the
mailing list before you make changes to @code{ltmain.in}, since they may
have advice on the most effective way of accomplishing what you want.

@node Porting inter-library dependencies
@subsection Porting inter-library dependencies support
@cindex inter-library dependency
@vindex deplibs_check_method

Since version 1.2c, libtool has re-introduced the ability to do
inter-library dependency on some platforms, thanks to a patch by Toshio
Kuratomi @email{badger@@prtr-13.ucsc.edu}.  Here's a shortened version
of the message that contained his patch:

The basic architecture is this: in @file{libtool.m4}, the person who
writes libtool makes sure @samp{$deplibs} is included in
@samp{$archive_cmds} somewhere and also sets the variable
@samp{$deplibs_check_method}, and maybe @samp{$file_magic_cmd} when
@samp{deplibs_check_method} is file_magic.

@samp{deplibs_check_method} can be one of five things:
@table @samp
@item file_magic [@var{regex}]
@vindex file_magic
@vindex file_magic_cmd
@vindex file_magic_test_file
looks in the library link path for libraries that have the right
libname.  Then it runs @samp{$file_magic_cmd} on the library and checks
for a match against the extended regular expression @var{regex}.  When
@var{file_magic_test_file} is set by @file{libtool.m4}, it is used as an
argument to @samp{$file_magic_cmd} in order to verify whether the
regular expression matches its output, and warn the user otherwise.

@item test_compile
@vindex test_compile
just checks whether it is possible to link a program out of a list of
libraries, and checks which of those are listed in the output of
@code{ldd}.  It is currently unused, and will probably be dropped in the
future.

@item pass_all
@vindex pass_all
will pass everything without any checking.  This may work on platforms
in which code is position-independent by default and inter-library
dependencies are properly supported by the dynamic linker, for example,
on DEC OSF/1 3 and 4.

@item none
@vindex none
It causes deplibs to be reassigned @samp{deplibs=""}.  That way
@samp{archive_cmds} can contain deplibs on all platforms, but not have
deplibs used unless needed.

@item unknown
@vindex unknown
is the default for all systems unless overridden in @file{libtool.m4}.
It is the same as @samp{none}, but it documents that we really don't
know what the correct value should be, and we welcome patches that
improve it.
@end table

Then in @file{ltmain.in} we have the real workhorse: a little
initialization and postprocessing (to setup/release variables for use
with eval echo libname_spec etc.) and a case statement that decides
the method that is being used.  This is the real code@dots{} I wish I could
condense it a little more, but I don't think I can without function
calls.  I've mostly optimized it (moved things out of loops, etc.) but
there is probably some fat left.  I thought I should stop while I was
ahead, work on whatever bugs you discover, etc.@: before thinking about
more than obvious optimizations.

@node Tested platforms
@section Tested platforms

This table describes when libtool was last known to be tested on
platforms where it claims to support shared libraries:

@example
@include PLATFORMS
@end example

Note: The vendor-distributed HP-UX @command{sed}(1) programs are horribly
broken, and cannot handle libtool's requirements, so users may report
unusual problems.  There is no workaround except to install a working
@command{sed} (such as @sc{gnu} @command{sed}) on these systems.

Note: The vendor-distributed NCR MP-RAS @command{cc} programs emits
copyright on standard error that confuse tests on size of
@file{conftest.err}.  The workaround is to specify @code{CC}
when run @code{configure} with @kbd{CC='cc -Hnocopyr'}.

@node Platform quirks
@section Platform quirks

This section is dedicated to the sanity of the libtool maintainers.  It
describes the programs that libtool uses, how they vary from system to
system, and how to test for them.

Because libtool is a shell script, it can be difficult to understand
just by reading it from top to bottom.  This section helps show why
libtool does things a certain way.  Combined with the scripts
themselves, you should have a better sense of how to improve libtool, or
write your own.

@menu
* References::                  Finding more information.
* Compilers::                   Creating object files from source files.
* Reloadable objects::          Binding object files together.
* Multiple dependencies::       Removing duplicate dependent libraries.
* Archivers::                   Programs that create static archives.
@end menu

@node References
@subsection References

The following is a list of valuable documentation references:

@itemize @bullet
@item
SGI's IRIX Manual Pages can be found at@*
@url{http://techpubs.sgi.com/cgi-bin/infosrch.cgi?cmd=browse&db=man}.

@item
Sun's free service area
(@url{http://www.sun.com/service/online/free.html}) and documentation
server (@url{http://docs.sun.com/}).

@item
Compaq's Tru64 UNIX online documentation is at@*
(@url{http://tru64unix.compaq.com/faqs/publications/pub_page/doc_list.html})
with C++ documentation at@*
(@url{http://tru64unix.compaq.com/cplus/docs/index.htm}).

@item
Hewlett-Packard has online documentation at
(@url{http://docs.hp.com/index.html}).

@item
IBM has online documentation at
(@url{http://www.rs6000.ibm.com/resource/aix_resource/Pubs/}).
@end itemize

@node Compilers
@subsection Compilers

The only compiler characteristics that affect libtool are the flags
needed (if any) to generate @sc{pic} objects.  In general, if a C compiler
supports certain @sc{pic} flags, then any derivative compilers support the
same flags.  Until there are some noteworthy exceptions to this rule,
this section will document only C compilers.

The following C compilers have standard command line options, regardless
of the platform:

@table @code
@item gcc

This is the @sc{gnu} C compiler, which is also the system compiler for many
free operating systems (FreeBSD, @sc{gnu}/Hurd, @sc{gnu}/Linux, Lites, NetBSD, and
OpenBSD, to name a few).

The @option{-fpic} or @option{-fPIC} flags can be used to generate
position-independent code.  @option{-fPIC} is guaranteed to generate
working code, but the code is slower on m68k, m88k, and Sparc chips.
However, using @option{-fpic} on those chips imposes arbitrary size limits
on the shared libraries.
@end table

The rest of this subsection lists compilers by the operating system that
they are bundled with:

@c FIXME these should all be better-documented

@table @code
@item aix3*
@itemx aix4*
Most AIX compilers have no @sc{pic} flags, since AIX (with the exception of
AIX for IA-64) runs on PowerPC and RS/6000 chips. @footnote{All code compiled
for the PowerPC and RS/6000 chips (@code{powerpc-*-*}, @code{powerpcle-*-*},
and @code{rs6000-*-*}) is position-independent, regardless of the operating
system or compiler suite.  So, ``regular objects'' can be used to build
shared libraries on these systems and no special @sc{pic} compiler flags are
required.}

@item hpux10*
Use @samp{+Z} to generate @sc{pic}.

@item osf3*
Digital/UNIX 3.x does not have @sc{pic} flags, at least not on the PowerPC
platform.

@item solaris2*
Use @option{-KPIC} to generate @sc{pic}.

@item sunos4*
Use @option{-PIC} to generate @sc{pic}.
@end table

@node Reloadable objects
@subsection Reloadable objects

On all known systems, a reloadable object can be created by running
@kbd{ld -r -o @var{output}.o @var{input1}.o @var{input2}.o}.  This
reloadable object may be treated as exactly equivalent to other
objects.

@node Multiple dependencies
@subsection Multiple dependencies

On most modern platforms the order in which dependent libraries are listed
has no effect on object generation.  In theory, there are platforms
that require libraries that provide missing symbols to other libraries
to be listed after those libraries whose symbols they provide.

Particularly, if a pair of static archives each resolve some of the
other's symbols, it might be necessary to list one of those archives
both before and after the other one.  Libtool does not currently cope
with this situation well, since duplicate libraries are removed from
the link line by default.  Libtool provides the command line option
@option{--preserve-dup-deps} to preserve all duplicate dependencies
in cases where it is necessary.

@node Archivers
@subsection Archivers

On all known systems, building a static library can be accomplished by
running @kbd{ar cru lib@var{name}.a @var{obj1}.o @var{obj2}.o @dots{}},
where the @samp{.a} file is the output library, and each @samp{.o} file is an
object file.

On all known systems, if there is a program named @command{ranlib}, then it
must be used to ``bless'' the created library before linking against it,
with the @kbd{ranlib lib@var{name}.a} command.  Some systems, like Irix,
use the @code{ar ts} command, instead.

@node libtool script contents
@section @code{libtool} script contents
@cindex implementation of libtool
@cindex libtool implementation

Since version 1.4, the @code{libtool} script is generated by
@code{configure} (@pxref{Configuring}).  In earlier versions,
@code{configure} achieved this by calling a helper script called
@file{ltconfig}.  From libtool version 0.7 to 1.0, this script
simply set shell variables, then sourced the libtool backend,
@code{ltmain.sh}.  @code{ltconfig} from libtool version 1.1 through 1.3
inlined the contents of @code{ltmain.sh} into the generated
@code{libtool}, which improved performance on many systems.  The tests
that @file{ltconfig} used to perform are now kept in @file{libtool.m4}
where they can be written using Autoconf.  This has the runtime
performance benefits of inlined @code{ltmain.sh}, @emph{and} improves
the build time a little while considerably easing the amount of raw
shell code that used to need maintaining.

The convention used for naming variables that hold shell commands for
delayed evaluation, is to use the suffix @code{_cmd} where a single
line of valid shell script is needed, and the suffix @code{_cmds} where
multiple lines of shell script @strong{may} be delayed for later
evaluation.  By convention, @code{_cmds} variables delimit the
evaluation units with the @code{~} character where necessary.

Here is a listing of each of the configuration variables, and how they
are used within @code{ltmain.sh} (@pxref{Configuring}):

@defvar AR
The name of the system library archiver.
@end defvar

@defvar CC
The name of the compiler used to configure libtool.  This will always
contain the compiler for the current language (@pxref{Tags}).
@end defvar

@defvar ECHO
An @command{echo} program that does not interpret backslashes as an
escape character.  It may be given only one argument, so due quoting
is necessary.
@end defvar

@defvar LD
The name of the linker that libtool should use internally for reloadable
linking and possibly shared libraries.
@end defvar

@defvar LTCC
@defvarx LTCFLAGS
The name of the C compiler and C compiler flags used to configure
libtool.
@end defvar

@defvar NM
The name of a BSD- or MS-compatible program that produces listings of
global symbols.
For BSD @command{nm}, the symbols should be in one the following formats:

@example
@var{address} C @var{global-variable-name}
@var{address} D @var{global-variable-name}
@var{address} T @var{global-function-name}
@end example

For MS @command{dumpbin}, the symbols should be in one of the following
formats:

@example
@var{counter} @var{size}    UNDEF    notype       External     | @var{global-var}
@var{counter} @var{address} @var{section}  notype       External     | @var{global-var}
@var{counter} @var{address} @var{section}  notype ()    External     | @var{global-func}
@end example

The @var{size} of the global variables are not zero and the @var{section}
of the global functions are not "UNDEF". Symbols in "pick any" sections
("pick any" appears in the section header) are not global either.
@end defvar

@defvar RANLIB
Set to the name of the @command{ranlib} program, if any.
@end defvar

@defvar allow_undefined_flag
The flag that is used by @samp{archive_cmds} in order to declare that
there will be unresolved symbols in the resulting shared library.
Empty, if no such flag is required.  Set to @samp{unsupported} if there
is no way to generate a shared library with references to symbols that
aren't defined in that library.
@end defvar

@defvar always_export_symbols
Whether libtool should automatically generate a list of exported symbols
using @var{export_symbols_cmds} before linking an archive.
Set to @samp{yes} or @samp{no}.  Default is @samp{no}.
@end defvar

@defvar archive_cmds
@defvarx archive_expsym_cmds
@defvarx old_archive_cmds
Commands used to create shared libraries, shared libraries with
@option{-export-symbols} and static libraries, respectively.
@end defvar

@defvar old_archive_from_new_cmds
If the shared library depends on a static library,
@samp{old_archive_from_new_cmds} contains the commands used to create that
static library.  If this variable is not empty, @samp{old_archive_cmds} is
not used.
@end defvar

@defvar old_archive_from_expsyms_cmds
If a static library must be created from the export symbol list in order to
correctly link with a shared library, @samp{old_archive_from_expsyms_cmds}
contains the commands needed to create that static library.  When these
commands are executed, the variable @var{soname} contains the name of the
shared library in question, and the @var{$objdir/$newlib} contains the
path of the static library these commands should build.  After executing
these commands, libtool will proceed to link against @var{$objdir/$newlib}
instead of @var{soname}.
@end defvar

@defvar build
@defvarx build_alias
@defvarx build_os
Set to the specified and canonical names of the system that libtool was
built on.
@end defvar

@defvar build_libtool_libs
Whether libtool should build shared libraries on this system.  Set to
@samp{yes} or @samp{no}.
@end defvar

@defvar build_old_libs
Whether libtool should build static libraries on this system.  Set to
@samp{yes} or @samp{no}.
@end defvar

@defvar compiler_c_o
Whether the compiler supports the @option{-c} and @option{-o} options
simultaneously.  Set to @samp{yes} or @samp{no}.
@end defvar

@defvar compiler_needs_object
Whether the compiler has to see an object listed on the command line in
order to successfully invoke the linker.  If @samp{no}, then a set of
convenience archives or a set of object file names can be passed via
linker-specific options or linker scripts.
@end defvar

@defvar dlopen_support
Whether @code{dlopen} is supported on the platform.
Set to @samp{yes} or @samp{no}.
@end defvar

@defvar dlopen_self
Whether it is possible to @code{dlopen} the executable itself.
Set to @samp{yes} or @samp{no}.
@end defvar

@defvar dlopen_self_static
Whether it is possible to @code{dlopen} the executable itself, when it
is linked statically (@option{-all-static}).  Set to @samp{yes} or
@samp{no}.
@end defvar

@defvar exclude_expsyms
List of symbols that should not be listed in the preloaded symbols.
@end defvar

@defvar export_dynamic_flag_spec
Compiler link flag that allows a dlopened shared library to reference
symbols that are defined in the program.
@end defvar

@defvar export_symbols_cmds
Commands to extract exported symbols from @var{libobjs} to the
file @var{export_symbols}.
@end defvar

@defvar extract_expsyms_cmds
Commands to extract the exported symbols list from a shared library.
These commands are executed if there is no file @var{$objdir/$soname-def},
and should write the names of the exported symbols to that file, for
the use of @samp{old_archive_from_expsyms_cmds}.
@end defvar

@defvar fast_install
Determines whether libtool will privilege the installer or the
developer.  The assumption is that installers will seldom run programs
in the build tree, and the developer will seldom install.  This is only
meaningful on platforms where @var{shlibpath_overrides_runpath} is
not @samp{yes}, so @var{fast_install} will be set to @samp{needless} in
this case.  If @var{fast_install} set to @samp{yes}, libtool will create
programs that search for installed libraries, and, if a program is run
in the build tree, a new copy will be linked on-demand to use the
yet-to-be-installed libraries.  If set to @samp{no}, libtool will create
programs that use the yet-to-be-installed libraries, and will link
a new copy of the program at install time.  The default value is
@samp{yes} or @samp{needless}, depending on platform and configuration
flags, and it can be turned from @samp{yes} to @samp{no} with the
configure flag @option{--disable-fast-install}.

On some systems, the linker always hardcodes paths to dependent libraries
into the output.  In this case, @var{fast_install} is never set to @samp{yes},
and relinking at install time is triggered.  This also means that @var{DESTDIR}
installation does not work as expected.
@end defvar

@defvar finish_cmds
Commands to tell the dynamic linker how to find shared libraries in a
specific directory.
@end defvar

@defvar finish_eval
Same as @var{finish_cmds}, except the commands are not displayed.
@end defvar

@defvar fix_srcfile_path
Expression to fix the shell variable @samp{$srcfile} for the compiler.
@end defvar

@defvar global_symbol_pipe
A pipeline that takes the output of @var{NM}, and produces a listing of
raw symbols followed by their C names.  For example:

@example
$ @kbd{eval "$NM progname | $global_symbol_pipe"}
D @var{symbol1} @var{C-symbol1}
T @var{symbol2} @var{C-symbol2}
C @var{symbol3} @var{C-symbol3}
@dots{}
$
@end example

The first column contains the symbol type (used to tell data from code)
but its meaning is system dependent.
@end defvar

@defvar global_symbol_to_cdecl
A pipeline that translates the output of @var{global_symbol_pipe} into
proper C declarations.  Since some platforms, such as HP/UX, have
linkers that differentiate code from data, data symbols are declared
as data, and code symbols are declared as functions.
@end defvar

@defvar hardcode_action
Either @samp{immediate} or @samp{relink}, depending on whether shared
library paths can be hardcoded into executables before they are installed,
or if they need to be relinked.
@end defvar

@defvar hardcode_direct
Set to @samp{yes} or @samp{no}, depending on whether the linker
hardcodes directories if a library is directly specified on the command
line (such as @samp{@var{dir}/lib@var{name}.a}) when
@var{hardcode_libdir_flag_spec} is specified.
@end defvar

@defvar hardcode_direct_absolute
Some architectures hardcode "absolute" library directories that can not
be overridden by @var{shlibpath_var} when @var{hardcode_direct} is
@samp{yes}.  In that case set @var{hardcode_direct_absolute} to
@samp{yes}, or otherwise @samp{no}.
@end defvar

@defvar hardcode_into_libs
Whether the platform supports hardcoding of run-paths into libraries.
If enabled, linking of programs will be much simpler but libraries will
need to be relinked during installation.  Set to @samp{yes} or @samp{no}.
@end defvar

@defvar hardcode_libdir_flag_spec
Flag to hardcode a @var{libdir} variable into a binary, so that the
dynamic linker searches @var{libdir} for shared libraries at runtime.
If it is empty, libtool will try to use some other hardcoding mechanism.
@end defvar

@defvar hardcode_libdir_separator
If the compiler only accepts a single @var{hardcode_libdir_flag}, then
this variable contains the string that should separate multiple
arguments to that flag.
@end defvar

@defvar hardcode_minus_L
Set to @samp{yes} or @samp{no}, depending on whether the linker
hardcodes directories specified by @option{-L} flags into the resulting
executable when @var{hardcode_libdir_flag_spec} is specified.
@end defvar

@defvar hardcode_shlibpath_var
Set to @samp{yes} or @samp{no}, depending on whether the linker
hardcodes directories by writing the contents of @samp{$shlibpath_var}
into the resulting executable when @var{hardcode_libdir_flag_spec} is
specified.  Set to @samp{unsupported} if directories specified by
@samp{$shlibpath_var} are searched at run time, but not at link time.
@end defvar

@defvar host
@defvarx host_alias
@defvarx host_os
Set to the specified and canonical names of the system that libtool was
configured for.
@end defvar

@defvar include_expsyms
List of symbols that must always be exported when using @var{export_symbols}.
@end defvar

@defvar inherit_rpath
Whether the linker adds runtime paths of dependency libraries to the
runtime path list, requiring libtool to relink the output when installing.
Set to @samp{yes} or @samp{no}.  Default is @samp{no}.
@end defvar

@defvar libext
The standard old archive suffix (normally @samp{a}).
@end defvar

@defvar libname_spec
The format of a library name prefix.  On all Unix systems, static
libraries are called @samp{lib@var{name}.a}, but on some systems (such
as OS/2 or MS-DOS), the library is just called @samp{@var{name}.a}.
@end defvar

@defvar library_names_spec
A list of shared library names.  The first is the name of the file,
the rest are symbolic links to the file.  The name in the list is
the file name that the linker finds when given @option{-l@var{name}}.
@end defvar

@defvar link_all_deplibs
Whether libtool must link a program against all its dependency libraries.
Set to @samp{yes} or @samp{no}.  Default is @samp{unknown}, which is
a synonym for @samp{yes}.
@end defvar

@defvar link_static_flag
Linker flag (passed through the C compiler) used to prevent dynamic
linking.
@end defvar

@defvar macro_version
@defvarx macro_revision
The release and CVS revision from which the libtool.m4 macros were
taken.  This is used to ensure that macros and @code{ltmain.sh}
correspond to the same Libtool version.
@end defvar

@defvar max_cmd_len
The approximate longest command line that can be passed to @samp{$SHELL}
without being truncated, as computed by @samp{LT_CMD_MAX_LEN}.
@end defvar

@defvar need_lib_prefix
Whether we can @code{dlopen} modules without a @samp{lib} prefix.
Set to @samp{yes} or @samp{no}.  By default, it is @samp{unknown}, which
means the same as @samp{yes}, but documents that we are not really sure
about it.  @samp{no} means that it is possible to @code{dlopen} a
module without the @samp{lib} prefix.
@end defvar

@defvar need_version
Whether versioning is required for libraries, i.e.@: whether the
dynamic linker requires a version suffix for all libraries.
Set to @samp{yes} or @samp{no}.  By default, it is @samp{unknown}, which
means the same as @samp{yes}, but documents that we are not really sure
about it.
@end defvar

@defvar need_locks
Whether files must be locked to prevent conflicts when compiling
simultaneously.  Set to @samp{yes} or @samp{no}.
@end defvar

@defvar no_builtin_flag
Compiler flag to disable builtin functions that conflict with declaring
external global symbols as @code{char}.
@end defvar

@defvar no_undefined_flag
The flag that is used by @samp{archive_cmds} in order to declare that
there will be no unresolved symbols in the resulting shared library.
Empty, if no such flag is required.
@end defvar

@defvar objdir
The name of the directory that contains temporary libtool files.
@end defvar

@defvar objext
The standard object file suffix (normally @samp{o}).
@end defvar

@defvar pic_flag
Any additional compiler flags for building library object files.
@end defvar

@defvar postinstall_cmds
@defvarx old_postinstall_cmds
Commands run after installing a shared or static library, respectively.
@end defvar

@defvar postuninstall_cmds
@defvarx old_postuninstall_cmds
Commands run after uninstalling a shared or static library, respectively.
@end defvar

@defvar reload_cmds
@defvarx reload_flag
Commands to create a reloadable object.
@end defvar

@defvar runpath_var
The environment variable that tells the linker which directories to
hardcode in the resulting executable.
@end defvar

@defvar shlibpath_overrides_runpath
Indicates whether it is possible to override the hard-coded library
search path of a program with an environment variable.  If this is set
to no, libtool may have to create two copies of a program in the build
tree, one to be installed and one to be run in the build tree only.
When each of these copies is created depends on the value of
@code{fast_install}.  The default value is @samp{unknown}, which is
equivalent to @samp{no}.
@end defvar

@defvar shlibpath_var
The environment variable that tells the dynamic linker where to find
shared libraries.
@end defvar

@defvar soname_spec
The name coded into shared libraries, if different from the real name of
the file.
@end defvar

@defvar striplib
@defvarx old_striplib
Command to strip a shared (@code{striplib}) or static (@code{old_striplib})
library, respectively.  If these variables are empty, the strip flag
in the install mode will be ignored for libraries (@pxref{Install mode}).
@end defvar

@defvar sys_lib_dlsearch_path_spec
Expression to get the run-time system library search path.  Directories
that appear in this list are never hard-coded into executables.
@end defvar

@defvar sys_lib_search_path_spec
Expression to get the compile-time system library search path.  This
variable is used by libtool when it has to test whether a certain
library is shared or static.  The directories listed in
@var{shlibpath_var} are automatically appended to this list, every time
libtool runs (i.e., not at configuration time), because some linkers use
this variable to extend the library search path.  Linker switches such
as @option{-L} also augment the search path.
@end defvar

@defvar thread_safe_flag_spec
Linker flag (passed through the C compiler) used to generate thread-safe
libraries.
@end defvar

@defvar version_type
The library version numbering type.  One of @samp{libtool},
@samp{freebsd-aout}, @samp{freebsd-elf}, @samp{irix}, @samp{linux},
@samp{osf}, @samp{sunos}, @samp{windows}, or @samp{none}.
@end defvar

@defvar whole_archive_flag_spec
Compiler flag to generate shared objects from convenience archives.
@end defvar

@defvar wl
The C compiler flag that allows libtool to pass a flag directly to the
linker.  Used as: @code{$@{wl@}@var{some-flag}}.
@end defvar

Variables ending in @samp{_cmds} or @samp{_eval} contain a
@samp{~}-separated list of commands that are @code{eval}ed one after
another.  If any of the commands return a nonzero exit status, libtool
generally exits with an error message.

Variables ending in @samp{_spec} are @code{eval}ed before being used by
libtool.

@node Cheap tricks
@section Cheap tricks

Here are a few tricks that you can use in order to make maintainership
easier:

@itemize @bullet
@item
When people report bugs, ask them to use the @option{--config},
@option{--debug}, or @option{--features} flags, if you think they will help
you.  These flags are there to help you get information directly, rather
than having to trust second-hand observation.

@item
Rather than reconfiguring libtool every time I make a change to
@code{ltmain.in}, I keep a permanent @code{libtool} script in my
@var{PATH}, which sources @code{ltmain.in} directly.

The following steps describe how to create such a script, where
@code{/home/src/libtool} is the directory containing the libtool source
tree, @code{/home/src/libtool/libtool} is a libtool script that has been
configured for your platform, and @code{~/bin} is a directory in your
@var{PATH}:

@example
trick$ cd ~/bin
trick$ sed 's%^\(macro_version=\).*$%\1@@VERSION@@%;
            s%^\(macro_revision=\).*$%\1@@package_revision@@%;
            /^# ltmain\.sh/q' /home/src/libtool/libtool > libtool
trick$ echo '. /home/src/libtool/ltmain.in' >> libtool
trick$ chmod +x libtool
trick$ libtool --version
ltmain.sh (GNU @@PACKAGE@@@@TIMESTAMP@@) @@VERSION@@

Copyright (C) 2008 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
trick$
@end example
@end itemize

The output of the final @samp{libtool --version} command shows that the
@code{ltmain.in} script is being used directly.  Now, modify
@code{~/bin/libtool} or @code{/home/src/libtool/ltmain.in} directly in
order to test new changes without having to rerun @code{configure}.

@node GNU Free Documentation License
@appendix GNU Free Documentation License

@cindex FDL, GNU Free Documentation License

@include fdl.texi

@page
@node Index
@unnumbered Index

@printindex cp

@c summarycontents
@contents
@bye