gem5 is a meritocratic, consensus-based community project. Anyone with an interest in the project can join the community, contribute to the project design and participate in the decision-making process. Historically, gem5 development has been carried out both in industry and in academia. This document describes how that participation takes place and how to set about earning merit within the project community.
The document is broken into a number of sections. Philosophy describes the ideas behind the gem5 community. The Roadmap section points to the roadmap document for gem5’s development. Users and Responsibilities describes the classes of users that use gem5, the types of gem5 contributors, and their responsibilities. Support describes how the community supports users and the Contribution process describes how to contribute. Finally, the Decision Process describes how decisions are made and then we conclude.
The goal of gem5 is to provide a tool to further the state of the art in computer architecture. gem5 can be used for (but is not limited to) computer-architecture research, advanced development, system-level performance analysis and design-space exploration, hardware-software co-design, and low-level software performance analysis. Another goal of gem5 is to be a common framework for computer architecture. A common framework in the academic community makes it easier for other researchers to share workloads as well as models and to compare and contrast with other architectural techniques.
The gem5 community strives to balance the needs of its three user types (academic researchers, industry researchers, and students, detailed below). For instance, gem5 strives to balance adding new features (important to researchers) and a stable code base (important for students). Specific user needs important to the community are enumerated below:
Additionally, the gem5 community is committed to openness, transparency, and inclusiveness. Participants in the gem5 community of all backgrounds should feel welcome and encouraged to contribute.
The roadmap for gem5 can be found on Roadmap page. The roadmap document details the short and long term goals for the gem5 software. Users of all types are encouraged to contribute to this document and shape the future of gem5. Users are especially encouraged to update the roadmap (and get consensus) before submitting large changes to gem5.
Users are community members who have a need for the project. They are the most important members of the community and without them the project would have no purpose. Anyone can be a user; there are no special requirements. There are currently three main categories of gem5 users: academic researchers, industry researchers, and students. Individuals may transition between categories, e.g., when a graduate student takes an industry internship, then returns to school; or when a student graduates and takes a job in industry. These three users are described below.
This type of user primarily encompasses individuals that use gem5 in academic research. Examples include, but are not limited to, graduate students, research scientists, and post-graduates. This user often uses gem5 as a tool to discover and invent new computer architecture mechanisms. Academic Researchers often are first exposed to gem5 as Students (see below) and transition from Students to Academic Researchers over time.
Because of these users’ goals, they primarily add new features to gem5. It is important to the gem5 community to encourage these users to contribute their work to the mainline gem5 repository. By encouraging these users to commit their research contributions, gem5 will make it much easier for other researchers to compare and contrast with other architectural techniques (see Philosophy section).
This type of user primarily encompasses individuals working for companies that use gem5. These users are distinguished from academic researchers in two ways. First, industry researchers are often part of a larger team, rather than working individually on gem5. Second, industry researchers often want to incorporate proprietary information into private branches of gem5. Therefore, industry researchers tend to have rather sophisticated software infrastructures built around gem5. For these users, the stability of gem5 features and baseline source code is important. Another key consideration is the fidelity of the models, and their ability to accurately reflect realistic implementations. To enable industry participation, it is critical to maintain licensing terms that do not restrict or burden the use of gem5 in conjunction with proprietary IP.
This type of user primarily encompasses individuals that are using gem5 in a classroom setting. These users typically have some foundation in computer architecture, but they have little or no background using simulation tools. Additionally, these users may not use gem5 for an extended period of time, after finishing their short-term goals (e.g., a semester-long class).
The project asks its users to participate in the project and community as much as possible. User contributions enable the project team to ensure that they are satisfying the needs of those users. Common user contributions include (but are not limited to):
Users who continue to engage with the project and its community will often become more and more involved. Such users may find themselves becoming contributors, as described in the next section.
Contributors are community members who contribute in concrete ways to the project. Anyone can become a contributor, and contributions can take many forms. There are no specific skill requirements and no selection process.
There is only one expectation of commitment to the project: contributors must be respectful to each other during the review process and work together to reach compromises. See the “Reviewing Patches” section for more on the process of contributing.
In addition to their actions as users, contributors may also find themselves doing one or more of the following:
Contributors engage with the project through the Review Board and mailing list, or by writing or editing documentation. They submit changes to the project source code via patches submitted to Review Board, which will be considered for inclusion in the project by existing committers (see next section). The developer mailing list is the most appropriate place to ask for help when making that first contribution.
As contributors gain experience and familiarity with the project, their profile within, and commitment to, the community will increase. At some stage, they may find themselves being nominated for committership.
Committers are community members who have shown that they are committed to the continued development of the project through ongoing engagement with the community. Committership allows contributors to more easily carry on with their project related activities by giving them direct access to the project’s resources. That is, they can make changes directly to project outputs, although they still have to submit code changes via Review Board. Additionally, committers are expected to have an ongoing record of contributions in terms of code, reviews, and/or discussion.
Committers have no more authority over the project than contributors. While committership indicates a valued member of the community who has demonstrated a healthy respect for the project’s aims and objectives, their work continues to be reviewed by the community. The key difference between a committer and a contributor is committers have the extra responsibility of pushing patches to the mainline. Additionally, committers are expected to contribute to discussions on the gem5-dev list and review patches.
Anyone can become a committer. The only expectation is that a committer has demonstrated an ability to participate in the project as a team player. Specifically, refer to the 2nd paragraph of the Contributors section.
Typically, a potential committer will need to show that they have an understanding of the project, its objectives and its strategy (see Philosophy section). They will also have provided valuable contributions to the project over a period of time.
New committers can be nominated by any existing committer. Once they have been nominated, there will be a vote by the project management committee (PMC; see below). Committer nomination and voting is one of the few activities that takes place on the project’s private management list. This is to allow PMC members to freely express their opinions about a nominee without causing embarrassment. Once the vote has been held, the nominee is notified of the result. The nominee is entitled to request an explanation of any ‘no’ votes against them, regardless of the outcome of the vote. This explanation will be provided by the PMC Chair (see below) and will be anonymous and constructive in nature.
Nominees may decline their appointment as a committer. However, this is unusual, as the project does not expect any specific time or resource commitment from its community members. The intention behind the role of committer is to allow people to contribute to the project more easily, not to tie them into the project in any formal way.
It is important to recognise that commitership is a privilege, not a right. That privilege must be earned and once earned it can be removed by the PMC (see next section) in extreme circumstances. However, under normal circumstances committership exists for as long as the committer wishes to continue engaging with the project.
A committer who shows an above-average level of contribution to the project, particularly with respect to its strategic direction and long-term health, may be nominated to become a member of the PMC. This role is described below.
The project management committee consists of those individuals identified as ‘project owners’ on the development site. The PMC has additional responsibilities over and above those of a committer. These responsibilities ensure the smooth running of the project. PMC members are expected to review code contributions, participate in strategic planning, approve changes to the governance model and manage how the software is distributed and licensed.
Some PMC members are responsible for specific components of the gem5 project. This includes gem5 source modules (e.g., classic caches, O3CPU model, etc.) and project assets (e.g., the website). A list of the current components and the responsible members can be found within the MAINTAINERS document.
Members of the PMC do not have significant authority over other members of the community, although it is the PMC that votes on new committers. It also makes decisions when community consensus cannot be reached. In addition, the PMC has access to the project’s private mailing list. This list is used for sensitive issues, such as votes for new committers and legal matters that cannot be discussed in public. It is never used for project management or planning.
Membership of the PMC is by invitation from the existing PMC members. A nomination will result in discussion and then a vote by the existing PMC members. PMC membership votes are subject to consensus approval of the current PMC members. Additions to the PMC require unanimous agreement of the PMC members. Removing someone from the PMC requires N-1 positive votes, where N is the number of PMC members not including the individual who is being voted out.
The PMC Chair is a single individual, voted for by the PMC members. Once someone has been appointed Chair, they remain in that role until they choose to retire, or the PMC casts a two-thirds majority vote to remove them.
The PMC Chair has no additional authority over other members of the PMC: the role is one of coordinator and facilitator. The Chair is also expected to ensure that all governance processes are adhered to, and has the casting vote when any project decision fails to reach consensus.
All participants in the community are encouraged to provide support for new users within the project management infrastructure. This support is provided as a way of growing the community. Those seeking support should recognise that all support activity within the project is voluntary and is therefore provided as and when time allows.
Anyone, capable of showing respect to others, can contribute to the project, regardless of their skills, as there are many ways to contribute. For instance, a contributor might be active on the project mailing list and issue tracker, or might supply patches. The various ways of contributing are described in more detail in a separate document Submitting Contributions.
The developer mailing list is the most appropriate place for a contributor to ask for help when making their first contribution. See the Submitting Contributions page on the gem5 wiki for details of the gem5 contribution process. Each new contribution should be submitted as a patch to our Review Board site. Then, other gem5 developers will review your patch, possibly asking for minor changes. After the patch has received consensus (see Decision Making Process), the patch is ready to be committed to the gem5 tree. For committers, this is as simple as pushing the changeset. For contributors, a committer should push the changeset for you. If a committer does not push the changeset within a reasonable window (a couple of days), send a friendly reminder email to the gem5-dev list. Before a patch is committed to gem5, it must receive at least 2 “Ship its” from reviewboard. If there are no reviews on a patch, users should send follow up emails to the gem5-dev list asking for reviews.
An important part of the contribution process is providing feedback on patches that other developers submit. The purpose of reviewing patches is to weed out obvious bugs and to ensure that the code in gem5 is of sufficient quality.
All users are encouraged to review the contributions that are posted on Review Board. If you are an active gem5 user, it’s a good idea to keep your eye on the contributions that are posted there (typically by subscribing to the gem5-dev mailing list) so you can speak up when you see a contribution that could impact your use of gem5. It is far more effective to contribute your opinion in a review before a patch gets committed than to complain after the patch is committed, you update your repository, and you find that your simulations no longer work.
We greatly value the efforts of reviewers to maintain gem5’s code quality and consistency. However, it is important that reviews balance the desire to maintain the quality of the code in gem5 with the need to be open to accepting contributions from a broader community. People will base their desire to contribute (or continue contributing) on how they and other contributors are received. With that in mind, here are some guidelines for reviewers:
Decisions about the future of the project are made through discussion with all members of the community, from the newest user to the most experienced PMC member. All non-sensitive project management discussion takes place on the gem5-dev mailing list. Occasionally, sensitive discussion occurs on a private list.
In order to ensure that the project is not bogged down by endless discussion and continual voting, the project operates a policy of lazy consensus. This allows the majority of decisions to be made without resorting to a formal vote.
Decision making typically involves the following steps:
Any community member can make a proposal for consideration by the community. In order to initiate a discussion about a new idea, they should send an email to the gem5-dev list or submit a patch implementing the idea to Review Board. This will prompt a review and, if necessary, a discussion of the idea. The goal of this review and discussion is to gain approval for the contribution. Since most people in the project community have a shared vision, there is often little need for discussion in order to reach consensus.
In general, as long as nobody explicitly opposes a proposal, it is recognised as having the support of the community. This is called lazy consensus—that is, those who have not stated their opinion explicitly have implicitly agreed to the implementation of the proposal.
Lazy consensus is a very important concept within the project. It is this process that allows a large group of people to efficiently reach consensus, as someone with no objections to a proposal need not spend time stating their position, and others need not spend time reading such mails.
For lazy consensus to be effective, it is necessary to allow at least two weeks before assuming that there are no objections to the proposal. This requirement ensures that everyone is given enough time to read, digest and respond to the proposal. This time period is chosen so as to be as inclusive as possible of all participants, regardless of their location and time commitments. For Review Board requests, if there are no reviews after two weeks, the submitter should send a reminder email to the mailing list. Reviewers may ask patch submitters to delay submitting a patch when they have a desire to review a patch and need more time to do so. As discussed in the Contributing Section, each patch should have at least two “Ship its” before it is committed.
Not all decisions can be made using lazy consensus. Issues such as those affecting the strategic direction or legal standing of the project must gain explicit approval in the form of a vote. Every member of the community is encouraged to express their opinions in all discussion and all votes. However, only project committers and/or PMC members (as defined above) have binding votes for the purposes of decision making. A separate document on the voting within a meritocratic governance model (http://oss-watch.ac.uk/resources/meritocraticgovernancevoting) describes in more detail how voting is conducted in projects following the practice established within the Apache Software Foundation.
This document is based on the example (http://oss-watch.ac.uk/resources/meritocraticgovernancemodel) by Ross Gardler and Gabriel Hanganu and is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License