This chapter assumes you've already built a basic x86 system with gem5 and created a simple configuration script.
Let's start by downloading some ARM benchmark binaries. Begin from the root of the gem5 folder:
mkdir -p cpu_tests/benchmarks/bin/arm cd cpu_tests/benchmarks/bin/arm wget gem5.org/dist/current/gem5/cpu_tests/benchmarks/bin/arm/Bubblesort wget gem5.org/dist/current/gem5/cpu_tests/benchmarks/bin/arm/FloatMM
We'll use these to further test our ARM system.
Just as we did when we first built our basic x86 system, we run the same command, except this time we want it to compile with the default ARM configurations. To do so, we just replace x86 with ARM:
scons build/ARM/gem5.opt -j20
When compilation is finished you should have a working gem5 executable at
Before we can run any ARM binaries with our new system, we'll have to make a slight tweak to our simple.py.
If you recall when we created our simple configuration script, it was noted that we did not have to connect the PIO and interrupt ports to the memory bus for any ISA other than for an x86 system. So let's remove those 3 lines:
system.cpu.createInterruptController() #system.cpu.interrupts.pio = system.membus.master #system.cpu.interrupts.int_master = system.membus.slave #system.cpu.interrupts.int_slave = system.membus.master system.system_port = system.membus.slave
You can either delete or comment them out as above. Next let's set the processes command to one of our ARM benchmark binaries:
process.cmd = ['cpu_tests/benchmarks/bin/arm/Bubblesort']
If you'd like to test a simple hello program as before, just replace x86 with arm:
process.cmd = ['tests/test-progs/hello/bin/arm/linux/hello']
Simply run it as before, except replace X86 with ARM:
If you set your process to be the Bubblesort benchmark, your output should look like this:
gem5 Simulator System. http://gem5.org gem5 is copyrighted software; use the --copyright option for details. gem5 compiled Oct 3 2019 16:02:35 gem5 started Oct 6 2019 13:22:25 gem5 executing on amarillo, pid 77129 command line: build/ARM/gem5.opt configs/tutorial/simple.py Global frequency set at 1000000000000 ticks per second warn: DRAM device capacity (8192 Mbytes) does not match the address range assigned (512 Mbytes) 0: system.remote_gdb: listening for remote gdb on port 7002 Beginning simulation! info: Entering event queue @ 0. Starting simulation... info: Increasing stack size by one page. warn: readlink() called on '/proc/self/exe' may yield unexpected results in various settings. Returning '/home/jtoya/gem5/cpu_tests/benchmarks/bin/arm/Bubblesort' -50000 Exiting @ tick 258647411000 because exiting with last active thread context
To run an ARM FS Simulation, there are some changes required to the setup.
If you haven‘t already, from the gem5 repository’s root directory,
cd into the directory
util/term/ by running
$ cd util/term/
and then compile the
m5term binary by running
The gem5 repository comes with example system setups and configurations. These can be found in the
A collection of full system Linux image files are available here. Save these in a directory and remember the path to it. For example, you could store them in
fs_images directory will be assumed to contain the extracted FS images for the rest of this example.
With the image(s) downloaded, execute the following command in your terminal:
$ export IMG_ROOT=/absolute/path/to/fs_images/<image-directory-name>
replacing “<image-directory-name>” with the name of the directory extracted from the downloaded image file, without the angle-brackets.
We are now ready to run a FS ARM simulation. From the root of the gem5 repository, run:
$ ./build/ARM/gem5.opt configs/example/arm/fs_bigLITTLE.py \ --caches \ --bootloader="$IMG_ROOT/binaries/<bootloader-name>" \ --kernel="$IMG_ROOT/binaries/<kernel-name>" \ --disk="$IMG_ROOT/disks/<disk-image-name>" \ --bootscript=path/to/bootscript.rcS
replacing anything in angle-brackets with the name of the directory or file, without the angle-brackets.
You can then attach to the simulation by, in a different terminal window, running:
$ ./util/term/m5term 3456
The full details of what the
fs_bigLITTLE.py script supports can be gotten by running:
$ ./build/ARM/gem5.opt configs/example/arm/fs_bigLITTLE.py --help
An aside on FS simulations:
Note that FS simulations take a long time; like “1 hour to load the kernel” long time! There are ways to “fast-forward” a simulation and then resume the detailed simulation at the interesting point, but these are beyond the scope of this chapter.