system/alpha/h/fromHudsonOsf.h - public/gem5 - Git at Google

 /*
  * Copyright (c) 1993-1994 The Hewlett-Packard Development Company
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are
  * met: redistributions of source code must retain the above copyright
  * notice, this list of conditions and the following disclaimer;
  * redistributions in binary form must reproduce the above copyright
  * notice, this list of conditions and the following disclaimer in the
  * documentation and/or other materials provided with the distribution;
  * neither the name of the copyright holders nor the names of its
  * contributors may be used to endorse or promote products derived from
  * this software without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */

 #ifndef FROMHUDSONOSF_INCLUDED
 #define FROMHUDSONOSF_INCLUDED 1

 #define	__OSF_LOADED	1
 /*
 **  Seg0 and Seg1 Virtual Address (VA) Format
 **
 **	  Loc	Size	Name	Function
 **	 -----	----	----	---------------------------------
 **	<42:33>  10	SEG1	First level page table offset
 **	<32:23>  10	SEG2	Second level page table offset
 **	<22:13>  10	SEG3	Third level page table offset
 **	<12:00>  13	OFFSET	Byte within page offset
 */

 #define VA_V_SEG1	33
 #define	VA_M_SEG1	(0x3FF<<VA_V_SEG1)
 #define VA_V_SEG2	23
 #define VA_M_SEG2	(0x3FF<<VA_V_SEG2)
 #define VA_V_SEG3	13
 #define VA_M_SEG3	(0x3FF<<VA_V_SEG3)
 #define VA_V_OFFSET	0
 #define VA_M_OFFSET	0x1FFF

 /*
 **  Virtual Address Options: 8K byte page size
 */

 #define	VA_S_SIZE	43
 #define	VA_S_OFF	13
 #define	va_s_off	13
 #define VA_S_SEG	10
 #define VA_S_PAGE_SIZE	8192

 /*
 **  Page Table Entry (PTE) Format
 **
 **	 Extent	Size	Name	Function
 **	 ------	----	----	---------------------------------
 **	<63:32>	  32	PFN	Page Frame Number
 **	<31:16>	  16	SW	Reserved for software
 **	<15:14>	   2	RSV0	Reserved for hardware SBZ
 **	   <13>	   1	UWE	User Write Enable
 **	   <12>	   1	KWE	Kernel Write Enable
 **	<11:10>	   2	RSV1	Reserved for hardware SBZ
 **	    <9>	   1	URE	User Read Enable
 **	    <8>	   1	KRE	Kernel Read Enable
 **	    <7>	   1	RSV2	Reserved for hardware SBZ
 **	  <6:5>	   2	GH	Granularity Hint
 **	    <4>	   1	ASM	Address Space Match
 **	    <3>	   1	FOE	Fault On Execute
 **	    <2>	   1	FOW	Fault On Write
 **	    <1>	   1	FOR	Fault On Read
 **	    <0>	   1	V	Valid
 */

 #define	PTE_V_PFN	32
 #define PTE_M_PFN	0xFFFFFFFF00000000
 #define PTE_V_SW	16
 #define PTE_M_SW	0x00000000FFFF0000
 #define PTE_V_UWE	13
 #define PTE_M_UWE	(1<<PTE_V_UWE)
 #define PTE_V_KWE	12
 #define PTE_M_KWE	(1<<PTE_V_KWE)
 #define PTE_V_URE	9
 #define PTE_M_URE	(1<<PTE_V_URE)
 #define PTE_V_KRE	8
 #define PTE_M_KRE	(1<<PTE_V_KRE)
 #define PTE_V_GH	5
 #define PTE_M_GH	(3<<PTE_V_GH)
 #define PTE_V_ASM	4
 #define PTE_M_ASM	(1<<PTE_V_ASM)
 #define PTE_V_FOE	3
 #define PTE_M_FOE	(1<<PTE_V_FOE)
 #define PTE_V_FOW	2
 #define PTE_M_FOW	(1<<PTE_V_FOW)
 #define PTE_V_FOR	1
 #define PTE_M_FOR	(1<<PTE_V_FOR)
 #define PTE_V_VALID	0
 #define PTE_M_VALID	(1<<PTE_V_VALID)

 #define PTE_M_KSEG	0x1111
 #define PTE_M_PROT	0x3300
 #define pte_m_prot	0x3300

 /*
 **  System Entry Instruction Fault (entIF) Constants:
 */

 #define IF_K_BPT        0x0
 #define IF_K_BUGCHK     0x1
 #define IF_K_GENTRAP    0x2
 #define IF_K_FEN        0x3
 #define IF_K_OPCDEC     0x4

 /*
 **  System Entry Hardware Interrupt (entInt) Constants:
 */

 #define INT_K_IP	0x0
 #define INT_K_CLK	0x1
 #define INT_K_MCHK	0x2
 #define INT_K_DEV	0x3
 #define INT_K_PERF	0x4

 /*
 **  System Entry MM Fault (entMM) Constants:
 */

 #define	MM_K_TNV	0x0
 #define MM_K_ACV	0x1
 #define MM_K_FOR	0x2
 #define MM_K_FOE	0x3
 #define MM_K_FOW	0x4

 /*
 **  Process Control Block (PCB) Offsets:
 */

 #define PCB_Q_KSP	0x0000
 #define PCB_Q_USP	0x0008
 #define PCB_Q_PTBR	0x0010
 #define PCB_L_PCC	0x0018
 #define PCB_L_ASN	0x001C
 #define PCB_Q_UNIQUE	0x0020
 #define PCB_Q_FEN	0x0028
 #define PCB_Q_RSV0	0x0030
 #define PCB_Q_RSV1	0x0038

 /*
 **  Processor Status Register (PS) Bit Summary
 **
 **	Extent	Size	Name	Function
 **	------	----	----	---------------------------------
 **	  <3>	 1	CM	Current Mode
 **	<2:0>	 3	IPL	Interrupt Priority Level
 **/

 #define	PS_V_CM		3
 #define PS_M_CM		(1<<PS_V_CM)
 #define	PS_V_IPL	0
 #define	PS_M_IPL	(7<<PS_V_IPL)

 #define	PS_K_KERN	(0<<PS_V_CM)
 #define PS_K_USER	(1<<PS_V_CM)

 #define	IPL_K_ZERO	0x0
 #define IPL_K_SW0	0x1
 #define IPL_K_SW1	0x2
 #define IPL_K_DEV0	0x3
 #define IPL_K_DEV1	0x4
 #define IPL_K_CLK	0x5
 #define IPL_K_RT	0x6
 #define IPL_K_PERF      0x6
 #define IPL_K_PFAIL     0x6
 #define IPL_K_MCHK	0x7

 #define IPL_K_LOW	0x0
 #define IPL_K_HIGH	0x7

 /*
 **  SCB Offset Definitions:
 */

 #define SCB_Q_FEN	    	0x0010
 #define SCB_Q_ACV		0x0080
 #define SCB_Q_TNV		0x0090
 #define SCB_Q_FOR		0x00A0
 #define SCB_Q_FOW		0x00B0
 #define SCB_Q_FOE		0x00C0
 #define SCB_Q_ARITH		0x0200
 #define SCB_Q_KAST		0x0240
 #define SCB_Q_EAST		0x0250
 #define SCB_Q_SAST		0x0260
 #define SCB_Q_UAST		0x0270
 #define SCB_Q_UNALIGN		0x0280
 #define SCB_Q_BPT		0x0400
 #define SCB_Q_BUGCHK		0x0410
 #define SCB_Q_OPCDEC		0x0420
 #define SCB_Q_ILLPAL		0x0430
 #define SCB_Q_TRAP		0x0440
 #define SCB_Q_CHMK		0x0480
 #define SCB_Q_CHME		0x0490
 #define SCB_Q_CHMS		0x04A0
 #define SCB_Q_CHMU		0x04B0
 #define SCB_Q_SW0		0x0500
 #define SCB_Q_SW1		0x0510
 #define SCB_Q_SW2		0x0520
 #define SCB_Q_SW3		0x0530
 #define	SCB_Q_SW4		0x0540
 #define SCB_Q_SW5		0x0550
 #define SCB_Q_SW6		0x0560
 #define SCB_Q_SW7		0x0570
 #define SCB_Q_SW8		0x0580
 #define SCB_Q_SW9		0x0590
 #define SCB_Q_SW10		0x05A0
 #define SCB_Q_SW11		0x05B0
 #define SCB_Q_SW12		0x05C0
 #define SCB_Q_SW13		0x05D0
 #define SCB_Q_SW14		0x05E0
 #define SCB_Q_SW15		0x05F0
 #define SCB_Q_CLOCK		0x0600
 #define SCB_Q_INTER		0x0610
 #define SCB_Q_SYSERR        	0x0620
 #define SCB_Q_PROCERR		0x0630
 #define SCB_Q_PWRFAIL		0x0640
 #define SCB_Q_PERFMON		0x0650
 #define SCB_Q_SYSMCHK		0x0660
 #define SCB_Q_PROCMCHK      	0x0670
 #define SCB_Q_PASSREL		0x0680

 /*
 **  Stack Frame (FRM) Offsets:
 **
 **  There are two types of system entries for OSF/1 - those for the
 **  callsys CALL_PAL function and those for exceptions and interrupts.
 **  Both entry types use the same stack frame layout.  The stack frame
 **  contains space for the PC, the PS, the saved GP, and the saved
 **  argument registers a0, a1, and a2.  On entry, SP points to the
 **  saved PS.
 */

 #define	FRM_Q_PS	0x0000
 #define FRM_Q_PC	0x0008
 #define FRM_Q_GP	0x0010
 #define FRM_Q_A0	0x0018
 #define FRM_Q_A1	0x0020
 #define FRM_Q_A2	0x0028

 #define FRM_K_SIZE	48

 #define STACK_FRAME(tmp1,tmp2)	\
         sll	ps, 63-PS_V_CM, p7;	\
         bge	p7, 0f;			\
         bis	zero, zero, ps;		\
         mtpr	sp, ptUsp;		\
         mfpr	sp, ptKsp;		\
 0:	lda	sp, 0-FRM_K_SIZE(sp);	\
         stq	tmp1, FRM_Q_PS(sp);	\
         stq	tmp2, FRM_Q_PC(sp);	\
         stq	gp, FRM_Q_GP(sp);	\
         stq	a0, FRM_Q_A0(sp);	\
         stq	a1, FRM_Q_A1(sp);	\
         stq	a2, FRM_Q_A2(sp)

 /*
 **  Halt Codes:
 */

 #define HLT_K_RESET	    0x0000
 #define HLT_K_HW_HALT	    0x0001
 #define HLT_K_KSP_INVAL	    0x0002
 #define HLT_K_SCBB_INVAL    0x0003
 #define HLT_K_PTBR_INVAL    0x0004
 #define HLT_K_SW_HALT	    0x0005
 #define HLT_K_DBL_MCHK	    0x0006
 #define HLT_K_MCHK_FROM_PAL 0x0007

 /*
 **  Machine Check Codes:
 */

 #define MCHK_K_TPERR	    0x0080
 #define MCHK_K_TCPERR	    0x0082
 #define MCHK_K_HERR	    0x0084
 #define MCHK_K_ECC_C	    0x0086
 #define MCHK_K_ECC_NC	    0x0088
 #define MCHK_K_UNKNOWN	    0x008A
 #define MCHK_K_CACKSOFT	    0x008C
 #define MCHK_K_BUGCHECK	    0x008E
 #define MCHK_K_OS_BUGCHECK  0x0090
 #define MCHK_K_DCPERR	    0x0092
 #define MCHK_K_ICPERR	    0x0094
 #define MCHK_K_RETRY_IRD    0x0096
 #define MCHK_K_PROC_HERR    0x0098

 /*
 ** System Machine Check Codes:
 */

 #define MCHK_K_READ_NXM     0x0200
 #define MCHK_K_SYS_HERR     0x0202

 /*
 **  Machine Check Error Status Summary (MCES) Register Format
 **
 **	 Extent	Size	Name	Function
 **	 ------	----	----	---------------------------------
 **	  <0>	  1	MIP	Machine check in progress
 **	  <1>	  1	SCE	System correctable error in progress
 **	  <2>	  1	PCE	Processor correctable error in progress
 **	  <3>	  1	DPC	Disable PCE error reporting
 **	  <4>	  1	DSC	Disable SCE error reporting
 */

 #define MCES_V_MIP	0
 #define MCES_M_MIP	(1<<MCES_V_MIP)
 #define MCES_V_SCE	1
 #define MCES_M_SCE	(1<<MCES_V_SCE)
 #define MCES_V_PCE	2
 #define MCES_M_PCE	(1<<MCES_V_PCE)
 #define MCES_V_DPC	3
 #define MCES_M_DPC	(1<<MCES_V_DPC)
 #define MCES_V_DSC	4
 #define MCES_M_DSC	(1<<MCES_V_DSC)

 #define MCES_M_ALL      (MCES_M_MIP | MCES_M_SCE | MCES_M_PCE | MCES_M_DPC \
                          | MCES_M_DSC)

 /*
 **  Who-Am-I (WHAMI) Register Format
 **
 **	 Extent	Size	Name	Function
 **	 ------	----	----	---------------------------------
 **	  <7:0>	  8	ID	Who-Am-I identifier
 **	  <15:8>   1	SWAP	Swap PALcode flag - character 'S'
 */

 #define WHAMI_V_SWAP	8
 #define WHAMI_M_SWAP	(1<<WHAMI_V_SWAP)
 #define WHAMI_V_ID	0
 #define WHAMI_M_ID	0xFF

 #define WHAMI_K_SWAP    0x53    /* Character 'S' */

 /*
 **  Conventional Register Usage Definitions
 **
 **  Assembler temporary `at' is `AT' so it doesn't conflict with the
 **  `.set at' assembler directive.
 */

 #define v0		$0	/* Function Return Value Register */
 #define t0		$1	/* Scratch (Temporary) Registers ... */
 #define t1		$2
 #define t2		$3
 #define t3		$4
 #define t4		$5
 #define t5		$6
 #define t6		$7
 #define t7		$8
 #define s0		$9	/* Saved (Non-Volatile) Registers ... */
 #define s1		$10
 #define s2		$11
 #define s3		$12
 #define s4		$13
 #define s5		$14
 #define fp		$15	/* Frame Pointer Register, Or S6 */
 #define s6		$15
 #define a0		$16	/* Argument Registers ... */
 #define a1		$17
 #define a2		$18
 #define a3		$19
 #define a4		$20
 #define a5		$21
 #define t8		$22	/* Scratch (Temporary) Registers ... */
 #define t9		$23
 #define t10		$24
 #define t11		$25
 #define ra		$26	/* Return Address Register */
 #define pv		$27	/* Procedure Value Register, Or T12 */
 #define t12		$27
 #define AT		$28	/* Assembler Temporary (Volatile) Register */
 #define gp		$29	/* Global Pointer Register */
 #define sp		$30	/* Stack Pointer Register */
 #define zero		$31	/* Zero Register */

 /*
 **  OSF/1 Unprivileged CALL_PAL Entry Offsets:
 **
 **	Entry Name	    Offset (Hex)
 **
 **	bpt		     0080
 **	bugchk		     0081
 **	callsys		     0083
 **	imb		     0086
 **	rdunique	     009E
 **	wrunique	     009F
 **	gentrap		     00AA
 **	dbgstop		     00AD
 */

 #define UNPRIV			    0x80
 #define	PAL_BPT_ENTRY		    0x80
 #define PAL_BUGCHK_ENTRY	    0x81
 #define PAL_CALLSYS_ENTRY	    0x83
 #define PAL_IMB_ENTRY		    0x86
 #define PAL_RDUNIQUE_ENTRY	    0x9E
 #define PAL_WRUNIQUE_ENTRY	    0x9F
 #define PAL_GENTRAP_ENTRY	    0xAA

 #if defined(KDEBUG)
 #define	PAL_DBGSTOP_ENTRY	    0xAD
 /* #define NUM_UNPRIV_CALL_PALS	    10 */
 #else
 /* #define NUM_UNPRIV_CALL_PALS	    9  */
 #endif /* KDEBUG */

 /*
 **  OSF/1 Privileged CALL_PAL Entry Offsets:
 **
 **	Entry Name	    Offset (Hex)
 **
 **	halt		     0000
 **	cflush		     0001
 **	draina		     0002
 **	cserve		     0009
 **	swppal		     000A
 **	rdmces		     0010
 **	wrmces		     0011
 **	wrfen		     002B
 **	wrvptptr	     002D
 **	swpctx		     0030
 **	wrval		     0031
 **	rdval		     0032
 **	tbi		     0033
 **	wrent		     0034
 **	swpipl		     0035
 **	rdps		     0036
 **	wrkgp		     0037
 **	wrusp		     0038
 **	rdusp		     003A
 **	whami		     003C
 **	retsys		     003D
 **	rti		     003F
 */

 #define PAL_HALT_ENTRY	    0x0000
 #define PAL_CFLUSH_ENTRY    0x0001
 #define PAL_DRAINA_ENTRY    0x0002
 #define PAL_CSERVE_ENTRY    0x0009
 #define PAL_SWPPAL_ENTRY    0x000A
 #define PAL_WRIPIR_ENTRY    0x000D
 #define PAL_RDMCES_ENTRY    0x0010
 #define PAL_WRMCES_ENTRY    0x0011
 #define PAL_WRFEN_ENTRY	    0x002B
 #define PAL_WRVPTPTR_ENTRY  0x002D
 #define PAL_SWPCTX_ENTRY    0x0030
 #define PAL_WRVAL_ENTRY	    0x0031
 #define PAL_RDVAL_ENTRY	    0x0032
 #define PAL_TBI_ENTRY	    0x0033
 #define PAL_WRENT_ENTRY	    0x0034
 #define PAL_SWPIPL_ENTRY    0x0035
 #define PAL_RDPS_ENTRY	    0x0036
 #define PAL_WRKGP_ENTRY	    0x0037
 #define PAL_WRUSP_ENTRY	    0x0038
 #define PAL_RDUSP_ENTRY	    0x003A
 #define PAL_WHAMI_ENTRY	    0x003C
 #define PAL_RETSYS_ENTRY    0x003D
 #define PAL_RTI_ENTRY	    0x003F

 #define NUM_PRIV_CALL_PALS  23

 #endif
	/*
	* Copyright (c) 1993-1994 The Hewlett-Packard Development Company
	* All rights reserved.
	*
	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions are
	* met: redistributions of source code must retain the above copyright
	* notice, this list of conditions and the following disclaimer;
	* redistributions in binary form must reproduce the above copyright
	* notice, this list of conditions and the following disclaimer in the
	* documentation and/or other materials provided with the distribution;
	* neither the name of the copyright holders nor the names of its
	* contributors may be used to endorse or promote products derived from
	* this software without specific prior written permission.
	*
	* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
	* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
	* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
	* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
	* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
	* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
	* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
	* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
	* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
	* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	*/

	#ifndef FROMHUDSONOSF_INCLUDED
	#define FROMHUDSONOSF_INCLUDED 1

	#define __OSF_LOADED 1
	/*
	** Seg0 and Seg1 Virtual Address (VA) Format
	**
	** Loc Size Name Function
	** ----- ---- ---- ---------------------------------
	** <42:33> 10 SEG1 First level page table offset
	** <32:23> 10 SEG2 Second level page table offset
	** <22:13> 10 SEG3 Third level page table offset
	** <12:00> 13 OFFSET Byte within page offset
	*/

	#define VA_V_SEG1 33
	#define VA_M_SEG1 (0x3FF<<VA_V_SEG1)
	#define VA_V_SEG2 23
	#define VA_M_SEG2 (0x3FF<<VA_V_SEG2)
	#define VA_V_SEG3 13
	#define VA_M_SEG3 (0x3FF<<VA_V_SEG3)
	#define VA_V_OFFSET 0
	#define VA_M_OFFSET 0x1FFF

	/*
	** Virtual Address Options: 8K byte page size
	*/

	#define VA_S_SIZE 43
	#define VA_S_OFF 13
	#define va_s_off 13
	#define VA_S_SEG 10
	#define VA_S_PAGE_SIZE 8192

	/*
	** Page Table Entry (PTE) Format
	**
	** Extent Size Name Function
	** ------ ---- ---- ---------------------------------
	** <63:32> 32 PFN Page Frame Number
	** <31:16> 16 SW Reserved for software
	** <15:14> 2 RSV0 Reserved for hardware SBZ
	** <13> 1 UWE User Write Enable
	** <12> 1 KWE Kernel Write Enable
	** <11:10> 2 RSV1 Reserved for hardware SBZ
	** <9> 1 URE User Read Enable
	** <8> 1 KRE Kernel Read Enable
	** <7> 1 RSV2 Reserved for hardware SBZ
	** <6:5> 2 GH Granularity Hint
	** <4> 1 ASM Address Space Match
	** <3> 1 FOE Fault On Execute
	** <2> 1 FOW Fault On Write
	** <1> 1 FOR Fault On Read
	** <0> 1 V Valid
	*/

	#define PTE_V_PFN 32
	#define PTE_M_PFN 0xFFFFFFFF00000000
	#define PTE_V_SW 16
	#define PTE_M_SW 0x00000000FFFF0000
	#define PTE_V_UWE 13
	#define PTE_M_UWE (1<<PTE_V_UWE)
	#define PTE_V_KWE 12
	#define PTE_M_KWE (1<<PTE_V_KWE)
	#define PTE_V_URE 9
	#define PTE_M_URE (1<<PTE_V_URE)
	#define PTE_V_KRE 8
	#define PTE_M_KRE (1<<PTE_V_KRE)
	#define PTE_V_GH 5
	#define PTE_M_GH (3<<PTE_V_GH)
	#define PTE_V_ASM 4
	#define PTE_M_ASM (1<<PTE_V_ASM)
	#define PTE_V_FOE 3
	#define PTE_M_FOE (1<<PTE_V_FOE)
	#define PTE_V_FOW 2
	#define PTE_M_FOW (1<<PTE_V_FOW)
	#define PTE_V_FOR 1
	#define PTE_M_FOR (1<<PTE_V_FOR)
	#define PTE_V_VALID 0
	#define PTE_M_VALID (1<<PTE_V_VALID)

	#define PTE_M_KSEG 0x1111
	#define PTE_M_PROT 0x3300
	#define pte_m_prot 0x3300

	/*
	** System Entry Instruction Fault (entIF) Constants:
	*/

	#define IF_K_BPT 0x0
	#define IF_K_BUGCHK 0x1
	#define IF_K_GENTRAP 0x2
	#define IF_K_FEN 0x3
	#define IF_K_OPCDEC 0x4

	/*
	** System Entry Hardware Interrupt (entInt) Constants:
	*/

	#define INT_K_IP 0x0
	#define INT_K_CLK 0x1
	#define INT_K_MCHK 0x2
	#define INT_K_DEV 0x3
	#define INT_K_PERF 0x4

	/*
	** System Entry MM Fault (entMM) Constants:
	*/

	#define MM_K_TNV 0x0
	#define MM_K_ACV 0x1
	#define MM_K_FOR 0x2
	#define MM_K_FOE 0x3
	#define MM_K_FOW 0x4

	/*
	** Process Control Block (PCB) Offsets:
	*/

	#define PCB_Q_KSP 0x0000
	#define PCB_Q_USP 0x0008
	#define PCB_Q_PTBR 0x0010
	#define PCB_L_PCC 0x0018
	#define PCB_L_ASN 0x001C
	#define PCB_Q_UNIQUE 0x0020
	#define PCB_Q_FEN 0x0028
	#define PCB_Q_RSV0 0x0030
	#define PCB_Q_RSV1 0x0038

	/*
	** Processor Status Register (PS) Bit Summary
	**
	** Extent Size Name Function
	** ------ ---- ---- ---------------------------------
	** <3> 1 CM Current Mode
	** <2:0> 3 IPL Interrupt Priority Level
	**/

	#define PS_V_CM 3
	#define PS_M_CM (1<<PS_V_CM)
	#define PS_V_IPL 0
	#define PS_M_IPL (7<<PS_V_IPL)

	#define PS_K_KERN (0<<PS_V_CM)
	#define PS_K_USER (1<<PS_V_CM)

	#define IPL_K_ZERO 0x0
	#define IPL_K_SW0 0x1
	#define IPL_K_SW1 0x2
	#define IPL_K_DEV0 0x3
	#define IPL_K_DEV1 0x4
	#define IPL_K_CLK 0x5
	#define IPL_K_RT 0x6
	#define IPL_K_PERF 0x6
	#define IPL_K_PFAIL 0x6
	#define IPL_K_MCHK 0x7

	#define IPL_K_LOW 0x0
	#define IPL_K_HIGH 0x7

	/*
	** SCB Offset Definitions:
	*/

	#define SCB_Q_FEN 0x0010
	#define SCB_Q_ACV 0x0080
	#define SCB_Q_TNV 0x0090
	#define SCB_Q_FOR 0x00A0
	#define SCB_Q_FOW 0x00B0
	#define SCB_Q_FOE 0x00C0
	#define SCB_Q_ARITH 0x0200
	#define SCB_Q_KAST 0x0240
	#define SCB_Q_EAST 0x0250
	#define SCB_Q_SAST 0x0260
	#define SCB_Q_UAST 0x0270
	#define SCB_Q_UNALIGN 0x0280
	#define SCB_Q_BPT 0x0400
	#define SCB_Q_BUGCHK 0x0410
	#define SCB_Q_OPCDEC 0x0420
	#define SCB_Q_ILLPAL 0x0430
	#define SCB_Q_TRAP 0x0440
	#define SCB_Q_CHMK 0x0480
	#define SCB_Q_CHME 0x0490
	#define SCB_Q_CHMS 0x04A0
	#define SCB_Q_CHMU 0x04B0
	#define SCB_Q_SW0 0x0500
	#define SCB_Q_SW1 0x0510
	#define SCB_Q_SW2 0x0520
	#define SCB_Q_SW3 0x0530
	#define SCB_Q_SW4 0x0540
	#define SCB_Q_SW5 0x0550
	#define SCB_Q_SW6 0x0560
	#define SCB_Q_SW7 0x0570
	#define SCB_Q_SW8 0x0580
	#define SCB_Q_SW9 0x0590
	#define SCB_Q_SW10 0x05A0
	#define SCB_Q_SW11 0x05B0
	#define SCB_Q_SW12 0x05C0
	#define SCB_Q_SW13 0x05D0
	#define SCB_Q_SW14 0x05E0
	#define SCB_Q_SW15 0x05F0
	#define SCB_Q_CLOCK 0x0600
	#define SCB_Q_INTER 0x0610
	#define SCB_Q_SYSERR 0x0620
	#define SCB_Q_PROCERR 0x0630
	#define SCB_Q_PWRFAIL 0x0640
	#define SCB_Q_PERFMON 0x0650
	#define SCB_Q_SYSMCHK 0x0660
	#define SCB_Q_PROCMCHK 0x0670
	#define SCB_Q_PASSREL 0x0680

	/*
	** Stack Frame (FRM) Offsets:
	**
	** There are two types of system entries for OSF/1 - those for the
	** callsys CALL_PAL function and those for exceptions and interrupts.
	** Both entry types use the same stack frame layout. The stack frame
	** contains space for the PC, the PS, the saved GP, and the saved
	** argument registers a0, a1, and a2. On entry, SP points to the
	** saved PS.
	*/

	#define FRM_Q_PS 0x0000
	#define FRM_Q_PC 0x0008
	#define FRM_Q_GP 0x0010
	#define FRM_Q_A0 0x0018
	#define FRM_Q_A1 0x0020
	#define FRM_Q_A2 0x0028

	#define FRM_K_SIZE 48

	#define STACK_FRAME(tmp1,tmp2) \
	sll ps, 63-PS_V_CM, p7; \
	bge p7, 0f; \
	bis zero, zero, ps; \
	mtpr sp, ptUsp; \
	mfpr sp, ptKsp; \
	0: lda sp, 0-FRM_K_SIZE(sp); \
	stq tmp1, FRM_Q_PS(sp); \
	stq tmp2, FRM_Q_PC(sp); \
	stq gp, FRM_Q_GP(sp); \
	stq a0, FRM_Q_A0(sp); \
	stq a1, FRM_Q_A1(sp); \
	stq a2, FRM_Q_A2(sp)

	/*
	** Halt Codes:
	*/

	#define HLT_K_RESET 0x0000
	#define HLT_K_HW_HALT 0x0001
	#define HLT_K_KSP_INVAL 0x0002
	#define HLT_K_SCBB_INVAL 0x0003
	#define HLT_K_PTBR_INVAL 0x0004
	#define HLT_K_SW_HALT 0x0005
	#define HLT_K_DBL_MCHK 0x0006
	#define HLT_K_MCHK_FROM_PAL 0x0007

	/*
	** Machine Check Codes:
	*/

	#define MCHK_K_TPERR 0x0080
	#define MCHK_K_TCPERR 0x0082
	#define MCHK_K_HERR 0x0084
	#define MCHK_K_ECC_C 0x0086
	#define MCHK_K_ECC_NC 0x0088
	#define MCHK_K_UNKNOWN 0x008A
	#define MCHK_K_CACKSOFT 0x008C
	#define MCHK_K_BUGCHECK 0x008E
	#define MCHK_K_OS_BUGCHECK 0x0090
	#define MCHK_K_DCPERR 0x0092
	#define MCHK_K_ICPERR 0x0094
	#define MCHK_K_RETRY_IRD 0x0096
	#define MCHK_K_PROC_HERR 0x0098

	/*
	** System Machine Check Codes:
	*/

	#define MCHK_K_READ_NXM 0x0200
	#define MCHK_K_SYS_HERR 0x0202

	/*
	** Machine Check Error Status Summary (MCES) Register Format
	**
	** Extent Size Name Function
	** ------ ---- ---- ---------------------------------
	** <0> 1 MIP Machine check in progress
	** <1> 1 SCE System correctable error in progress
	** <2> 1 PCE Processor correctable error in progress
	** <3> 1 DPC Disable PCE error reporting
	** <4> 1 DSC Disable SCE error reporting
	*/

	#define MCES_V_MIP 0
	#define MCES_M_MIP (1<<MCES_V_MIP)
	#define MCES_V_SCE 1
	#define MCES_M_SCE (1<<MCES_V_SCE)
	#define MCES_V_PCE 2
	#define MCES_M_PCE (1<<MCES_V_PCE)
	#define MCES_V_DPC 3
	#define MCES_M_DPC (1<<MCES_V_DPC)
	#define MCES_V_DSC 4
	#define MCES_M_DSC (1<<MCES_V_DSC)

	#define MCES_M_ALL (MCES_M_MIP \| MCES_M_SCE \| MCES_M_PCE \| MCES_M_DPC \
	\| MCES_M_DSC)

	/*
	** Who-Am-I (WHAMI) Register Format
	**
	** Extent Size Name Function
	** ------ ---- ---- ---------------------------------
	** <7:0> 8 ID Who-Am-I identifier
	** <15:8> 1 SWAP Swap PALcode flag - character 'S'
	*/

	#define WHAMI_V_SWAP 8
	#define WHAMI_M_SWAP (1<<WHAMI_V_SWAP)
	#define WHAMI_V_ID 0
	#define WHAMI_M_ID 0xFF

	#define WHAMI_K_SWAP 0x53 /* Character 'S' */

	/*
	** Conventional Register Usage Definitions
	**
	** Assembler temporary `at' is `AT' so it doesn't conflict with the
	** `.set at' assembler directive.
	*/

	#define v0 $0 /* Function Return Value Register */
	#define t0 $1 /* Scratch (Temporary) Registers ... */
	#define t1 $2
	#define t2 $3
	#define t3 $4
	#define t4 $5
	#define t5 $6
	#define t6 $7
	#define t7 $8
	#define s0 $9 /* Saved (Non-Volatile) Registers ... */
	#define s1 $10
	#define s2 $11
	#define s3 $12
	#define s4 $13
	#define s5 $14
	#define fp $15 /* Frame Pointer Register, Or S6 */
	#define s6 $15
	#define a0 $16 /* Argument Registers ... */
	#define a1 $17
	#define a2 $18
	#define a3 $19
	#define a4 $20
	#define a5 $21
	#define t8 $22 /* Scratch (Temporary) Registers ... */
	#define t9 $23
	#define t10 $24
	#define t11 $25
	#define ra $26 /* Return Address Register */
	#define pv $27 /* Procedure Value Register, Or T12 */
	#define t12 $27
	#define AT $28 /* Assembler Temporary (Volatile) Register */
	#define gp $29 /* Global Pointer Register */
	#define sp $30 /* Stack Pointer Register */
	#define zero $31 /* Zero Register */

	/*
	** OSF/1 Unprivileged CALL_PAL Entry Offsets:
	**
	** Entry Name Offset (Hex)
	**
	** bpt 0080
	** bugchk 0081
	** callsys 0083
	** imb 0086
	** rdunique 009E
	** wrunique 009F
	** gentrap 00AA
	** dbgstop 00AD
	*/

	#define UNPRIV 0x80
	#define PAL_BPT_ENTRY 0x80
	#define PAL_BUGCHK_ENTRY 0x81
	#define PAL_CALLSYS_ENTRY 0x83
	#define PAL_IMB_ENTRY 0x86
	#define PAL_RDUNIQUE_ENTRY 0x9E
	#define PAL_WRUNIQUE_ENTRY 0x9F
	#define PAL_GENTRAP_ENTRY 0xAA

	#if defined(KDEBUG)
	#define PAL_DBGSTOP_ENTRY 0xAD
	/* #define NUM_UNPRIV_CALL_PALS 10 */
	#else
	/* #define NUM_UNPRIV_CALL_PALS 9 */
	#endif /* KDEBUG */

	/*
	** OSF/1 Privileged CALL_PAL Entry Offsets:
	**
	** Entry Name Offset (Hex)
	**
	** halt 0000
	** cflush 0001
	** draina 0002
	** cserve 0009
	** swppal 000A
	** rdmces 0010
	** wrmces 0011
	** wrfen 002B
	** wrvptptr 002D
	** swpctx 0030
	** wrval 0031
	** rdval 0032
	** tbi 0033
	** wrent 0034
	** swpipl 0035
	** rdps 0036
	** wrkgp 0037
	** wrusp 0038
	** rdusp 003A
	** whami 003C
	** retsys 003D
	** rti 003F
	*/

	#define PAL_HALT_ENTRY 0x0000
	#define PAL_CFLUSH_ENTRY 0x0001
	#define PAL_DRAINA_ENTRY 0x0002
	#define PAL_CSERVE_ENTRY 0x0009
	#define PAL_SWPPAL_ENTRY 0x000A
	#define PAL_WRIPIR_ENTRY 0x000D
	#define PAL_RDMCES_ENTRY 0x0010
	#define PAL_WRMCES_ENTRY 0x0011
	#define PAL_WRFEN_ENTRY 0x002B
	#define PAL_WRVPTPTR_ENTRY 0x002D
	#define PAL_SWPCTX_ENTRY 0x0030
	#define PAL_WRVAL_ENTRY 0x0031
	#define PAL_RDVAL_ENTRY 0x0032
	#define PAL_TBI_ENTRY 0x0033
	#define PAL_WRENT_ENTRY 0x0034
	#define PAL_SWPIPL_ENTRY 0x0035
	#define PAL_RDPS_ENTRY 0x0036
	#define PAL_WRKGP_ENTRY 0x0037
	#define PAL_WRUSP_ENTRY 0x0038
	#define PAL_RDUSP_ENTRY 0x003A
	#define PAL_WHAMI_ENTRY 0x003C
	#define PAL_RETSYS_ENTRY 0x003D
	#define PAL_RTI_ENTRY 0x003F

	#define NUM_PRIV_CALL_PALS 23

	#endif