blob: f60bf232dcff474bfcb90998e91242feaa498543 [file] [log] [blame]
# Copyright (c) 2019 ARM Limited
# All rights reserved.
#
# The license below extends only to copyright in the software and shall
# not be construed as granting a license to any other intellectual
# property including but not limited to intellectual property relating
# to a hardware implementation of the functionality of the software
# licensed hereunder. You may use the software subject to the license
# terms below provided that you ensure that this notice is replicated
# unmodified and in its entirety in all distributions of the software,
# modified or unmodified, in source code or in binary form.
#
# Copyright (c) 2015 Advanced Micro Devices, Inc.
# All rights reserved
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met: redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer;
# redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution;
# neither the name of the copyright holders nor the names of its
# contributors may be used to endorse or promote products derived from
# this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
import m5
from m5.objects import *
from m5.util.convert import *
from functools import reduce
import operator, os, platform, getpass
from os import mkdir, makedirs, getpid, listdir, stat, access
from pwd import getpwuid
from os.path import join as joinpath
from os.path import isdir
from shutil import rmtree, copyfile
def hex_mask(terms):
dec_mask = reduce(operator.or_, [2**i for i in terms], 0)
return "%08x" % dec_mask
def file_append(path, contents):
with open(joinpath(*path), 'a') as f:
f.write(str(contents))
def replace_tree(path):
if isdir(path):
rmtree(path)
mkdir(path)
def config_filesystem(system, options = None):
""" This function parses the system object to create the pseudo file system
@param system: The system to create the config for
@param options: An optional argument which contains an Options.py options
object. This is useful if when use se.py and will set the L2 cache
size and the clock in /proc/cpuinfo if provided.
First, this function walks the system object to find all CPUs.
Then, this function creates the following files with the CPU information
- /proc/cpuinfo which contains the clock and the L2 size
(assumes all L2s private and the same size)
- /proc/stat simply lists all CPUs
- /sys/devices/system/cpu/online and /sys/devices/system/cpu/possible
These files list all of the CPUs in this system.
- /tmp
These files are created in the `fs` directory in the outdir path.
"""
fsdir = joinpath(m5.options.outdir, 'fs')
replace_tree(fsdir)
# Set up /proc
procdir = joinpath(fsdir, 'proc')
mkdir(procdir)
try:
cpus = \
[obj for obj in system.descendants() if isinstance(obj, BaseCPU)]
except NameError:
# BaseCPU is not defined for the NULL ISA
cpus = []
cpu_clock = 0
if hasattr(options, 'cpu_clock'):
cpu_clock = toFrequency(options.cpu_clock) / mega
l2_size = 0
if hasattr(options, 'l2_size'):
l2_size = toMemorySize(options.l2_size) / kibi
for i,cpu in enumerate(cpus):
one_cpu = 'processor : {proc}\n' + \
'vendor_id : Generic\n' + \
'cpu family : 0\n' + \
'model : 0\n' + \
'model name : Generic\n' + \
'stepping : 0\n' + \
'cpu MHz : {clock:0.3f}\n' + \
'cache size: : {l2_size}K\n' + \
'physical id : 0\n' + \
'siblings : {num_cpus}\n' + \
'core id : {proc}\n' + \
'cpu cores : {num_cpus}\n' + \
'fpu : yes\n' + \
'fpu exception : yes\n' + \
'cpuid level : 1\n' + \
'wp : yes\n' + \
'flags : fpu\n' + \
'cache alignment : {cacheline_size}\n' + \
'\n'
one_cpu = one_cpu.format(proc = i, num_cpus = len(cpus),
# Note: it would be nice to use cpu.clock, but it hasn't
# been finalized yet since m5.instantiate() isn't done.
clock = cpu_clock,
# Note: this assumes the L2 is private to each core
l2_size = l2_size,
cacheline_size=system.cache_line_size.getValue())
file_append((procdir, 'cpuinfo'), one_cpu)
file_append((procdir, 'stat'), 'cpu 0 0 0 0 0 0 0\n')
for i in range(len(cpus)):
file_append((procdir, 'stat'), 'cpu%d 0 0 0 0 0 0 0\n' % i)
# Set up /sys
sysdir = joinpath(fsdir, 'sys')
mkdir(sysdir)
# Set up /sys/devices/system/cpu
cpudir = joinpath(sysdir, 'devices', 'system', 'cpu')
makedirs(cpudir, exist_ok=True)
file_append((cpudir, 'online'), '0-%d' % (len(cpus) - 1))
file_append((cpudir, 'possible'), '0-%d' % (len(cpus) - 1))
# Set up /tmp
tmpdir = joinpath(fsdir, 'tmp')
replace_tree(tmpdir)
system.redirect_paths = _redirect_paths(options)
# Setting the interpreter path. This is used to load the
# guest dynamic linker itself from the elf file.
interp = getattr(options, 'interp_dir', None)
if interp:
from m5.core import setInterpDir
setInterpDir(interp)
print("Setting the interpreter path to:", interp,
"\nFor dynamically linked applications you might still "
"need to setup the --redirects so that libraries are "
"found\n")
def register_node(cpu_list, mem, node_number):
nodebasedir = joinpath(m5.options.outdir, 'fs', 'sys', 'devices',
'system', 'node')
nodedir = joinpath(nodebasedir,'node%d' % node_number)
makedirs(nodedir, exist_ok=True)
file_append((nodedir, 'cpumap'), hex_mask(cpu_list))
file_append((nodedir, 'meminfo'),
'Node %d MemTotal: %dkB' % (node_number,
toMemorySize(str(mem))/kibi))
def register_cpu(physical_package_id, core_siblings,
core_id, thread_siblings):
cpudir = joinpath(m5.options.outdir, 'fs', 'sys', 'devices', 'system',
'cpu', 'cpu%d' % core_id)
makedirs(joinpath(cpudir, 'topology'), exist_ok=True)
makedirs(joinpath(cpudir, 'cache'))
file_append((cpudir, 'online'), '1')
file_append((cpudir, 'topology', 'physical_package_id'),
physical_package_id)
file_append((cpudir, 'topology', 'core_siblings'),
hex_mask(core_siblings))
file_append((cpudir, 'topology', 'core_id'), core_id)
file_append((cpudir, 'topology', 'thread_siblings'),
hex_mask(thread_siblings))
def register_cache(level, idu_type, size, line_size, assoc, cpus):
fsdir = joinpath(m5.options.outdir, 'fs')
for i in cpus:
cachedir = joinpath(fsdir, 'sys', 'devices', 'system', 'cpu',
'cpu%d' % i, 'cache')
j = 0
while isdir(joinpath(cachedir, 'index%d' % j)):
j += 1
indexdir = joinpath(cachedir, 'index%d' % j)
makedirs(indexdir, exist_ok=True)
file_append((indexdir, 'level'), level)
file_append((indexdir, 'type'), idu_type)
file_append((indexdir, 'size'), "%dK" % (toMemorySize(size)/kibi))
file_append((indexdir, 'coherency_line_size'), line_size)
# Since cache size = number of indices * associativity * block size
num_sets = toMemorySize(size) / int(assoc) * int(line_size)
file_append((indexdir, 'number_of_sets'), num_sets)
file_append((indexdir, 'physical_line_partition'), '1')
file_append((indexdir, 'shared_cpu_map'), hex_mask(cpus))
file_append((indexdir, 'shared_cpu_list'),
','.join(str(cpu) for cpu in cpus))
def _redirect_paths(options):
# Redirect filesystem syscalls from src to the first matching dests
redirect_paths = [RedirectPath(app_path = "/proc",
host_paths = ["%s/fs/proc" % m5.options.outdir]),
RedirectPath(app_path = "/sys",
host_paths = ["%s/fs/sys" % m5.options.outdir]),
RedirectPath(app_path = "/tmp",
host_paths = ["%s/fs/tmp" % m5.options.outdir])]
# Setting the redirect paths so that the guest dynamic linker
# can point to the proper /lib collection (e.g. to load libc)
redirects = getattr(options, 'redirects', [])
for redirect in redirects:
app_path, host_path = redirect.split("=")
redirect_paths.append(
RedirectPath(app_path = app_path, host_paths = [ host_path ]))
chroot = getattr(options, 'chroot', None)
if chroot:
redirect_paths.append(
RedirectPath(
app_path = "/",
host_paths = ["%s" % os.path.expanduser(chroot)]))
return redirect_paths