/*
 * Copyright (c) 2012-2019 ARM Limited
 * All rights reserved
 *
 * The license below extends only to copyright in the software and shall
 * not be construed as granting a license to any other intellectual
 * property including but not limited to intellectual property relating
 * to a hardware implementation of the functionality of the software
 * licensed hereunder.  You may use the software subject to the license
 * terms below provided that you ensure that this notice is replicated
 * unmodified and in its entirety in all distributions of the software,
 * modified or unmodified, in source code or in binary form.
 *
 * Copyright (c) 2006 The Regents of The University of Michigan
 * Copyright (c) 2010,2015 Advanced Micro Devices, Inc.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are
 * met: redistributions of source code must retain the above copyright
 * notice, this list of conditions and the following disclaimer;
 * redistributions in binary form must reproduce the above copyright
 * notice, this list of conditions and the following disclaimer in the
 * documentation and/or other materials provided with the distribution;
 * neither the name of the copyright holders nor the names of its
 * contributors may be used to endorse or promote products derived from
 * this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

/**
 * @file
 * Declaration of the Packet class.
 */

#ifndef __MEM_PACKET_HH__
#define __MEM_PACKET_HH__

#include <bitset>
#include <cassert>
#include <list>

#include "base/addr_range.hh"
#include "base/cast.hh"
#include "base/compiler.hh"
#include "base/flags.hh"
#include "base/logging.hh"
#include "base/printable.hh"
#include "base/types.hh"
#include "mem/htm.hh"
#include "mem/request.hh"
#include "sim/byteswap.hh"
#include "sim/core.hh"

class Packet;
typedef Packet *PacketPtr;
typedef uint8_t* PacketDataPtr;
typedef std::list<PacketPtr> PacketList;
typedef uint64_t PacketId;

class MemCmd
{
    friend class Packet;

  public:
    /**
     * List of all commands associated with a packet.
     */
    enum Command
    {
        InvalidCmd,
        ReadReq,
        ReadResp,
        ReadRespWithInvalidate,
        WriteReq,
        WriteResp,
        WriteCompleteResp,
        WritebackDirty,
        WritebackClean,
        WriteClean,            // writes dirty data below without evicting
        CleanEvict,
        SoftPFReq,
        SoftPFExReq,
        HardPFReq,
        SoftPFResp,
        HardPFResp,
        WriteLineReq,
        UpgradeReq,
        SCUpgradeReq,           // Special "weak" upgrade for StoreCond
        UpgradeResp,
        SCUpgradeFailReq,       // Failed SCUpgradeReq in MSHR (never sent)
        UpgradeFailResp,        // Valid for SCUpgradeReq only
        ReadExReq,
        ReadExResp,
        ReadCleanReq,
        ReadSharedReq,
        LoadLockedReq,
        StoreCondReq,
        StoreCondFailReq,       // Failed StoreCondReq in MSHR (never sent)
        StoreCondResp,
        SwapReq,
        SwapResp,
        // MessageReq and MessageResp are deprecated.
        MemFenceReq = SwapResp + 3,
        MemSyncReq,  // memory synchronization request (e.g., cache invalidate)
        MemSyncResp, // memory synchronization response
        MemFenceResp,
        CleanSharedReq,
        CleanSharedResp,
        CleanInvalidReq,
        CleanInvalidResp,
        // Error responses
        // @TODO these should be classified as responses rather than
        // requests; coding them as requests initially for backwards
        // compatibility
        InvalidDestError,  // packet dest field invalid
        BadAddressError,   // memory address invalid
        FunctionalReadError, // unable to fulfill functional read
        FunctionalWriteError, // unable to fulfill functional write
        // Fake simulator-only commands
        PrintReq,       // Print state matching address
        FlushReq,      //request for a cache flush
        InvalidateReq,   // request for address to be invalidated
        InvalidateResp,
        // hardware transactional memory
        HTMReq,
        HTMReqResp,
        HTMAbort,
        NUM_MEM_CMDS
    };

  private:
    /**
     * List of command attributes.
     */
    enum Attribute
    {
        IsRead,         //!< Data flows from responder to requester
        IsWrite,        //!< Data flows from requester to responder
        IsUpgrade,
        IsInvalidate,
        IsClean,        //!< Cleans any existing dirty blocks
        NeedsWritable,  //!< Requires writable copy to complete in-cache
        IsRequest,      //!< Issued by requester
        IsResponse,     //!< Issue by responder
        NeedsResponse,  //!< Requester needs response from target
        IsEviction,
        IsSWPrefetch,
        IsHWPrefetch,
        IsLlsc,         //!< Alpha/MIPS LL or SC access
        HasData,        //!< There is an associated payload
        IsError,        //!< Error response
        IsPrint,        //!< Print state matching address (for debugging)
        IsFlush,        //!< Flush the address from caches
        FromCache,      //!< Request originated from a caching agent
        NUM_COMMAND_ATTRIBUTES
    };

    /**
     * Structure that defines attributes and other data associated
     * with a Command.
     */
    struct CommandInfo
    {
        /// Set of attribute flags.
        const std::bitset<NUM_COMMAND_ATTRIBUTES> attributes;
        /// Corresponding response for requests; InvalidCmd if no
        /// response is applicable.
        const Command response;
        /// String representation (for printing)
        const std::string str;
    };

    /// Array to map Command enum to associated info.
    static const CommandInfo commandInfo[];

  private:

    Command cmd;

    bool
    testCmdAttrib(MemCmd::Attribute attrib) const
    {
        return commandInfo[cmd].attributes[attrib] != 0;
    }

  public:

    bool isRead() const            { return testCmdAttrib(IsRead); }
    bool isWrite() const           { return testCmdAttrib(IsWrite); }
    bool isUpgrade() const         { return testCmdAttrib(IsUpgrade); }
    bool isRequest() const         { return testCmdAttrib(IsRequest); }
    bool isResponse() const        { return testCmdAttrib(IsResponse); }
    bool needsWritable() const     { return testCmdAttrib(NeedsWritable); }
    bool needsResponse() const     { return testCmdAttrib(NeedsResponse); }
    bool isInvalidate() const      { return testCmdAttrib(IsInvalidate); }
    bool isEviction() const        { return testCmdAttrib(IsEviction); }
    bool isClean() const           { return testCmdAttrib(IsClean); }
    bool fromCache() const         { return testCmdAttrib(FromCache); }

    /**
     * A writeback is an eviction that carries data.
     */
    bool isWriteback() const       { return testCmdAttrib(IsEviction) &&
                                            testCmdAttrib(HasData); }

    /**
     * Check if this particular packet type carries payload data. Note
     * that this does not reflect if the data pointer of the packet is
     * valid or not.
     */
    bool hasData() const        { return testCmdAttrib(HasData); }
    bool isLLSC() const         { return testCmdAttrib(IsLlsc); }
    bool isSWPrefetch() const   { return testCmdAttrib(IsSWPrefetch); }
    bool isHWPrefetch() const   { return testCmdAttrib(IsHWPrefetch); }
    bool isPrefetch() const     { return testCmdAttrib(IsSWPrefetch) ||
                                         testCmdAttrib(IsHWPrefetch); }
    bool isError() const        { return testCmdAttrib(IsError); }
    bool isPrint() const        { return testCmdAttrib(IsPrint); }
    bool isFlush() const        { return testCmdAttrib(IsFlush); }

    Command
    responseCommand() const
    {
        return commandInfo[cmd].response;
    }

    /// Return the string to a cmd given by idx.
    const std::string &toString() const { return commandInfo[cmd].str; }
    int toInt() const { return (int)cmd; }

    MemCmd(Command _cmd) : cmd(_cmd) { }
    MemCmd(int _cmd) : cmd((Command)_cmd) { }
    MemCmd() : cmd(InvalidCmd) { }

    bool operator==(MemCmd c2) const { return (cmd == c2.cmd); }
    bool operator!=(MemCmd c2) const { return (cmd != c2.cmd); }
};

/**
 * A Packet is used to encapsulate a transfer between two objects in
 * the memory system (e.g., the L1 and L2 cache).  (In contrast, a
 * single Request travels all the way from the requestor to the
 * ultimate destination and back, possibly being conveyed by several
 * different Packets along the way.)
 */
class Packet : public Printable
{
  public:
    typedef uint32_t FlagsType;
    typedef ::Flags<FlagsType> Flags;

  private:

    enum : FlagsType {
        // Flags to transfer across when copying a packet
        COPY_FLAGS             = 0x000000FF,

        // Flags that are used to create reponse packets
        RESPONDER_FLAGS        = 0x00000009,

        // Does this packet have sharers (which means it should not be
        // considered writable) or not. See setHasSharers below.
        HAS_SHARERS            = 0x00000001,

        // Special control flags
        /// Special timing-mode atomic snoop for multi-level coherence.
        EXPRESS_SNOOP          = 0x00000002,

        /// Allow a responding cache to inform the cache hierarchy
        /// that it had a writable copy before responding. See
        /// setResponderHadWritable below.
        RESPONDER_HAD_WRITABLE = 0x00000004,

        // Snoop co-ordination flag to indicate that a cache is
        // responding to a snoop. See setCacheResponding below.
        CACHE_RESPONDING       = 0x00000008,

        // The writeback/writeclean should be propagated further
        // downstream by the receiver
        WRITE_THROUGH          = 0x00000010,

        // Response co-ordination flag for cache maintenance
        // operations
        SATISFIED              = 0x00000020,

        // hardware transactional memory

        // Indicates that this packet/request has returned from the
        // cache hierarchy in a failed transaction. The core is
        // notified like this.
        FAILS_TRANSACTION      = 0x00000040,

        // Indicates that this packet/request originates in the CPU executing
        // in transactional mode, i.e. in a transaction.
        FROM_TRANSACTION       = 0x00000080,

        /// Are the 'addr' and 'size' fields valid?
        VALID_ADDR             = 0x00000100,
        VALID_SIZE             = 0x00000200,

        /// Is the data pointer set to a value that shouldn't be freed
        /// when the packet is destroyed?
        STATIC_DATA            = 0x00001000,
        /// The data pointer points to a value that should be freed when
        /// the packet is destroyed. The pointer is assumed to be pointing
        /// to an array, and delete [] is consequently called
        DYNAMIC_DATA           = 0x00002000,

        /// suppress the error if this packet encounters a functional
        /// access failure.
        SUPPRESS_FUNC_ERROR    = 0x00008000,

        // Signal block present to squash prefetch and cache evict packets
        // through express snoop flag
        BLOCK_CACHED          = 0x00010000
    };

    Flags flags;

  public:
    typedef MemCmd::Command Command;

    /// The command field of the packet.
    MemCmd cmd;

    const PacketId id;

    /// A pointer to the original request.
    RequestPtr req;

  private:
   /**
    * A pointer to the data being transferred. It can be different
    * sizes at each level of the hierarchy so it belongs to the
    * packet, not request. This may or may not be populated when a
    * responder receives the packet. If not populated memory should
    * be allocated.
    */
    PacketDataPtr data;

    /// The address of the request.  This address could be virtual or
    /// physical, depending on the system configuration.
    Addr addr;

    /// True if the request targets the secure memory space.
    bool _isSecure;

    /// The size of the request or transfer.
    unsigned size;

    /**
     * Track the bytes found that satisfy a functional read.
     */
    std::vector<bool> bytesValid;

    // Quality of Service priority value
    uint8_t _qosValue;

    // hardware transactional memory

    /**
     * Holds the return status of the transaction.
     * The default case will be NO_FAIL, otherwise this will specify the
     * reason for the transaction's failure in the memory subsystem.
     */
    HtmCacheFailure htmReturnReason;

    /**
     * A global unique identifier of the transaction.
     * This is used for correctness/debugging only.
     */
    uint64_t htmTransactionUid;

  public:

    /**
     * The extra delay from seeing the packet until the header is
     * transmitted. This delay is used to communicate the crossbar
     * forwarding latency to the neighbouring object (e.g. a cache)
     * that actually makes the packet wait. As the delay is relative,
     * a 32-bit unsigned should be sufficient.
     */
    uint32_t headerDelay;

    /**
     * Keep track of the extra delay incurred by snooping upwards
     * before sending a request down the memory system. This is used
     * by the coherent crossbar to account for the additional request
     * delay.
     */
    uint32_t snoopDelay;

    /**
     * The extra pipelining delay from seeing the packet until the end of
     * payload is transmitted by the component that provided it (if
     * any). This includes the header delay. Similar to the header
     * delay, this is used to make up for the fact that the
     * crossbar does not make the packet wait. As the delay is
     * relative, a 32-bit unsigned should be sufficient.
     */
    uint32_t payloadDelay;

    /**
     * A virtual base opaque structure used to hold state associated
     * with the packet (e.g., an MSHR), specific to a SimObject that
     * sees the packet. A pointer to this state is returned in the
     * packet's response so that the SimObject in question can quickly
     * look up the state needed to process it. A specific subclass
     * would be derived from this to carry state specific to a
     * particular sending device.
     *
     * As multiple SimObjects may add their SenderState throughout the
     * memory system, the SenderStates create a stack, where a
     * SimObject can add a new Senderstate, as long as the
     * predecessing SenderState is restored when the response comes
     * back. For this reason, the predecessor should always be
     * populated with the current SenderState of a packet before
     * modifying the senderState field in the request packet.
     */
    struct SenderState
    {
        SenderState* predecessor;
        SenderState() : predecessor(NULL) {}
        virtual ~SenderState() {}
    };

    /**
     * Object used to maintain state of a PrintReq.  The senderState
     * field of a PrintReq should always be of this type.
     */
    class PrintReqState : public SenderState
    {
      private:
        /**
         * An entry in the label stack.
         */
        struct LabelStackEntry
        {
            const std::string label;
            std::string *prefix;
            bool labelPrinted;
            LabelStackEntry(const std::string &_label, std::string *_prefix);
        };

        typedef std::list<LabelStackEntry> LabelStack;
        LabelStack labelStack;

        std::string *curPrefixPtr;

      public:
        std::ostream &os;
        const int verbosity;

        PrintReqState(std::ostream &os, int verbosity = 0);
        ~PrintReqState();

        /**
         * Returns the current line prefix.
         */
        const std::string &curPrefix() { return *curPrefixPtr; }

        /**
         * Push a label onto the label stack, and prepend the given
         * prefix string onto the current prefix.  Labels will only be
         * printed if an object within the label's scope is printed.
         */
        void pushLabel(const std::string &lbl,
                       const std::string &prefix = "  ");

        /**
         * Pop a label off the label stack.
         */
        void popLabel();

        /**
         * Print all of the pending unprinted labels on the
         * stack. Called by printObj(), so normally not called by
         * users unless bypassing printObj().
         */
        void printLabels();

        /**
         * Print a Printable object to os, because it matched the
         * address on a PrintReq.
         */
        void printObj(Printable *obj);
    };

    /**
     * This packet's sender state.  Devices should use dynamic_cast<>
     * to cast to the state appropriate to the sender.  The intent of
     * this variable is to allow a device to attach extra information
     * to a request. A response packet must return the sender state
     * that was attached to the original request (even if a new packet
     * is created).
     */
    SenderState *senderState;

    /**
     * Push a new sender state to the packet and make the current
     * sender state the predecessor of the new one. This should be
     * prefered over direct manipulation of the senderState member
     * variable.
     *
     * @param sender_state SenderState to push at the top of the stack
     */
    void pushSenderState(SenderState *sender_state);

    /**
     * Pop the top of the state stack and return a pointer to it. This
     * assumes the current sender state is not NULL. This should be
     * preferred over direct manipulation of the senderState member
     * variable.
     *
     * @return The current top of the stack
     */
    SenderState *popSenderState();

    /**
     * Go through the sender state stack and return the first instance
     * that is of type T (as determined by a dynamic_cast). If there
     * is no sender state of type T, NULL is returned.
     *
     * @return The topmost state of type T
     */
    template <typename T>
    T * findNextSenderState() const
    {
        T *t = NULL;
        SenderState* sender_state = senderState;
        while (t == NULL && sender_state != NULL) {
            t = dynamic_cast<T*>(sender_state);
            sender_state = sender_state->predecessor;
        }
        return t;
    }

    /// Return the string name of the cmd field (for debugging and
    /// tracing).
    const std::string &cmdString() const { return cmd.toString(); }

    /// Return the index of this command.
    inline int cmdToIndex() const { return cmd.toInt(); }

    bool isRead() const              { return cmd.isRead(); }
    bool isWrite() const             { return cmd.isWrite(); }
    bool isUpgrade()  const          { return cmd.isUpgrade(); }
    bool isRequest() const           { return cmd.isRequest(); }
    bool isResponse() const          { return cmd.isResponse(); }
    bool needsWritable() const
    {
        // we should never check if a response needsWritable, the
        // request has this flag, and for a response we should rather
        // look at the hasSharers flag (if not set, the response is to
        // be considered writable)
        assert(isRequest());
        return cmd.needsWritable();
    }
    bool needsResponse() const       { return cmd.needsResponse(); }
    bool isInvalidate() const        { return cmd.isInvalidate(); }
    bool isEviction() const          { return cmd.isEviction(); }
    bool isClean() const             { return cmd.isClean(); }
    bool fromCache() const           { return cmd.fromCache(); }
    bool isWriteback() const         { return cmd.isWriteback(); }
    bool hasData() const             { return cmd.hasData(); }
    bool hasRespData() const
    {
        MemCmd resp_cmd = cmd.responseCommand();
        return resp_cmd.hasData();
    }
    bool isLLSC() const              { return cmd.isLLSC(); }
    bool isError() const             { return cmd.isError(); }
    bool isPrint() const             { return cmd.isPrint(); }
    bool isFlush() const             { return cmd.isFlush(); }

    bool isWholeLineWrite(unsigned blk_size)
    {
        return (cmd == MemCmd::WriteReq || cmd == MemCmd::WriteLineReq) &&
            getOffset(blk_size) == 0 && getSize() == blk_size;
    }

    //@{
    /// Snoop flags
    /**
     * Set the cacheResponding flag. This is used by the caches to
     * signal another cache that they are responding to a request. A
     * cache will only respond to snoops if it has the line in either
     * Modified or Owned state. Note that on snoop hits we always pass
     * the line as Modified and never Owned. In the case of an Owned
     * line we proceed to invalidate all other copies.
     *
     * On a cache fill (see Cache::handleFill), we check hasSharers
     * first, ignoring the cacheResponding flag if hasSharers is set.
     * A line is consequently allocated as:
     *
     * hasSharers cacheResponding state
     * true       false           Shared
     * true       true            Shared
     * false      false           Exclusive
     * false      true            Modified
     */
    void setCacheResponding()
    {
        assert(isRequest());
        assert(!flags.isSet(CACHE_RESPONDING));
        flags.set(CACHE_RESPONDING);
    }
    bool cacheResponding() const { return flags.isSet(CACHE_RESPONDING); }
    /**
     * On fills, the hasSharers flag is used by the caches in
     * combination with the cacheResponding flag, as clarified
     * above. If the hasSharers flag is not set, the packet is passing
     * writable. Thus, a response from a memory passes the line as
     * writable by default.
     *
     * The hasSharers flag is also used by upstream caches to inform a
     * downstream cache that they have the block (by calling
     * setHasSharers on snoop request packets that hit in upstream
     * cachs tags or MSHRs). If the snoop packet has sharers, a
     * downstream cache is prevented from passing a dirty line upwards
     * if it was not explicitly asked for a writable copy. See
     * Cache::satisfyCpuSideRequest.
     *
     * The hasSharers flag is also used on writebacks, in
     * combination with the WritbackClean or WritebackDirty commands,
     * to allocate the block downstream either as:
     *
     * command        hasSharers state
     * WritebackDirty false      Modified
     * WritebackDirty true       Owned
     * WritebackClean false      Exclusive
     * WritebackClean true       Shared
     */
    void setHasSharers()    { flags.set(HAS_SHARERS); }
    bool hasSharers() const { return flags.isSet(HAS_SHARERS); }
    //@}

    /**
     * The express snoop flag is used for two purposes. Firstly, it is
     * used to bypass flow control for normal (non-snoop) requests
     * going downstream in the memory system. In cases where a cache
     * is responding to a snoop from another cache (it had a dirty
     * line), but the line is not writable (and there are possibly
     * other copies), the express snoop flag is set by the downstream
     * cache to invalidate all other copies in zero time. Secondly,
     * the express snoop flag is also set to be able to distinguish
     * snoop packets that came from a downstream cache, rather than
     * snoop packets from neighbouring caches.
     */
    void setExpressSnoop()      { flags.set(EXPRESS_SNOOP); }
    bool isExpressSnoop() const { return flags.isSet(EXPRESS_SNOOP); }

    /**
     * On responding to a snoop request (which only happens for
     * Modified or Owned lines), make sure that we can transform an
     * Owned response to a Modified one. If this flag is not set, the
     * responding cache had the line in the Owned state, and there are
     * possibly other Shared copies in the memory system. A downstream
     * cache helps in orchestrating the invalidation of these copies
     * by sending out the appropriate express snoops.
     */
    void setResponderHadWritable()
    {
        assert(cacheResponding());
        assert(!responderHadWritable());
        flags.set(RESPONDER_HAD_WRITABLE);
    }
    bool responderHadWritable() const
    { return flags.isSet(RESPONDER_HAD_WRITABLE); }

    /**
     * Copy the reponse flags from an input packet to this packet. The
     * reponse flags determine whether a responder has been found and
     * the state at which the block will be at the destination.
     *
     * @pkt The packet that we will copy flags from
     */
    void copyResponderFlags(const PacketPtr pkt);

    /**
     * A writeback/writeclean cmd gets propagated further downstream
     * by the receiver when the flag is set.
     */
    void setWriteThrough()
    {
        assert(cmd.isWrite() &&
               (cmd.isEviction() || cmd == MemCmd::WriteClean));
        flags.set(WRITE_THROUGH);
    }
    void clearWriteThrough() { flags.clear(WRITE_THROUGH); }
    bool writeThrough() const { return flags.isSet(WRITE_THROUGH); }

    /**
     * Set when a request hits in a cache and the cache is not going
     * to respond. This is used by the crossbar to coordinate
     * responses for cache maintenance operations.
     */
    void setSatisfied()
    {
        assert(cmd.isClean());
        assert(!flags.isSet(SATISFIED));
        flags.set(SATISFIED);
    }
    bool satisfied() const { return flags.isSet(SATISFIED); }

    void setSuppressFuncError()     { flags.set(SUPPRESS_FUNC_ERROR); }
    bool suppressFuncError() const  { return flags.isSet(SUPPRESS_FUNC_ERROR); }
    void setBlockCached()          { flags.set(BLOCK_CACHED); }
    bool isBlockCached() const     { return flags.isSet(BLOCK_CACHED); }
    void clearBlockCached()        { flags.clear(BLOCK_CACHED); }

    /**
     * QoS Value getter
     * Returns 0 if QoS value was never set (constructor default).
     *
     * @return QoS priority value of the packet
     */
    inline uint8_t qosValue() const { return _qosValue; }

    /**
     * QoS Value setter
     * Interface for setting QoS priority value of the packet.
     *
     * @param qos_value QoS priority value
     */
    inline void qosValue(const uint8_t qos_value)
    { _qosValue = qos_value; }

    inline RequestorID requestorId() const { return req->requestorId(); }

    // Network error conditions... encapsulate them as methods since
    // their encoding keeps changing (from result field to command
    // field, etc.)
    void
    setBadAddress()
    {
        assert(isResponse());
        cmd = MemCmd::BadAddressError;
    }

    void copyError(Packet *pkt) { assert(pkt->isError()); cmd = pkt->cmd; }

    Addr getAddr() const { assert(flags.isSet(VALID_ADDR)); return addr; }
    /**
     * Update the address of this packet mid-transaction. This is used
     * by the address mapper to change an already set address to a new
     * one based on the system configuration. It is intended to remap
     * an existing address, so it asserts that the current address is
     * valid.
     */
    void setAddr(Addr _addr) { assert(flags.isSet(VALID_ADDR)); addr = _addr; }

    unsigned getSize() const  { assert(flags.isSet(VALID_SIZE)); return size; }

    /**
     * Get address range to which this packet belongs.
     *
     * @return Address range of this packet.
     */
    AddrRange getAddrRange() const;

    Addr getOffset(unsigned int blk_size) const
    {
        return getAddr() & Addr(blk_size - 1);
    }

    Addr getBlockAddr(unsigned int blk_size) const
    {
        return getAddr() & ~(Addr(blk_size - 1));
    }

    bool isSecure() const
    {
        assert(flags.isSet(VALID_ADDR));
        return _isSecure;
    }

    /**
     * Accessor function to atomic op.
     */
    AtomicOpFunctor *getAtomicOp() const { return req->getAtomicOpFunctor(); }
    bool isAtomicOp() const { return req->isAtomic(); }

    /**
     * It has been determined that the SC packet should successfully update
     * memory. Therefore, convert this SC packet to a normal write.
     */
    void
    convertScToWrite()
    {
        assert(isLLSC());
        assert(isWrite());
        cmd = MemCmd::WriteReq;
    }

    /**
     * When ruby is in use, Ruby will monitor the cache line and the
     * phys memory should treat LL ops as normal reads.
     */
    void
    convertLlToRead()
    {
        assert(isLLSC());
        assert(isRead());
        cmd = MemCmd::ReadReq;
    }

    /**
     * Constructor. Note that a Request object must be constructed
     * first, but the Requests's physical address and size fields need
     * not be valid. The command must be supplied.
     */
    Packet(const RequestPtr &_req, MemCmd _cmd)
        :  cmd(_cmd), id((PacketId)_req.get()), req(_req),
           data(nullptr), addr(0), _isSecure(false), size(0),
           _qosValue(0),
           htmReturnReason(HtmCacheFailure::NO_FAIL),
           htmTransactionUid(0),
           headerDelay(0), snoopDelay(0),
           payloadDelay(0), senderState(NULL)
    {
        flags.clear();
        if (req->hasPaddr()) {
            addr = req->getPaddr();
            flags.set(VALID_ADDR);
            _isSecure = req->isSecure();
        }

        /**
         * hardware transactional memory
         *
         * This is a bit of a hack!
         * Technically the address of a HTM command is set to zero
         * but is not valid. The reason that we pretend it's valid is
         * to void the getAddr() function from failing. It would be
         * cumbersome to add control flow in many places to check if the
         * packet represents a HTM command before calling getAddr().
         */
        if (req->isHTMCmd()) {
            flags.set(VALID_ADDR);
            assert(addr == 0x0);
        }
        if (req->hasSize()) {
            size = req->getSize();
            flags.set(VALID_SIZE);
        }
    }

    /**
     * Alternate constructor if you are trying to create a packet with
     * a request that is for a whole block, not the address from the
     * req.  this allows for overriding the size/addr of the req.
     */
    Packet(const RequestPtr &_req, MemCmd _cmd, int _blkSize, PacketId _id = 0)
        :  cmd(_cmd), id(_id ? _id : (PacketId)_req.get()), req(_req),
           data(nullptr), addr(0), _isSecure(false),
           _qosValue(0),
           htmReturnReason(HtmCacheFailure::NO_FAIL),
           htmTransactionUid(0),
           headerDelay(0),
           snoopDelay(0), payloadDelay(0), senderState(NULL)
    {
        flags.clear();
        if (req->hasPaddr()) {
            addr = req->getPaddr() & ~(_blkSize - 1);
            flags.set(VALID_ADDR);
            _isSecure = req->isSecure();
        }
        size = _blkSize;
        flags.set(VALID_SIZE);
    }

    /**
     * Alternate constructor for copying a packet.  Copy all fields
     * *except* if the original packet's data was dynamic, don't copy
     * that, as we can't guarantee that the new packet's lifetime is
     * less than that of the original packet.  In this case the new
     * packet should allocate its own data.
     */
    Packet(const PacketPtr pkt, bool clear_flags, bool alloc_data)
        :  cmd(pkt->cmd), id(pkt->id), req(pkt->req),
           data(nullptr),
           addr(pkt->addr), _isSecure(pkt->_isSecure), size(pkt->size),
           bytesValid(pkt->bytesValid),
           _qosValue(pkt->qosValue()),
           htmReturnReason(HtmCacheFailure::NO_FAIL),
           htmTransactionUid(0),
           headerDelay(pkt->headerDelay),
           snoopDelay(0),
           payloadDelay(pkt->payloadDelay),
           senderState(pkt->senderState)
    {
        if (!clear_flags)
            flags.set(pkt->flags & COPY_FLAGS);

        flags.set(pkt->flags & (VALID_ADDR|VALID_SIZE));

        if (pkt->isHtmTransactional())
            setHtmTransactional(pkt->getHtmTransactionUid());

        if (pkt->htmTransactionFailedInCache()) {
            setHtmTransactionFailedInCache(
                pkt->getHtmTransactionFailedInCacheRC()
            );
        }

        // should we allocate space for data, or not, the express
        // snoops do not need to carry any data as they only serve to
        // co-ordinate state changes
        if (alloc_data) {
            // even if asked to allocate data, if the original packet
            // holds static data, then the sender will not be doing
            // any memcpy on receiving the response, thus we simply
            // carry the pointer forward
            if (pkt->flags.isSet(STATIC_DATA)) {
                data = pkt->data;
                flags.set(STATIC_DATA);
            } else {
                allocate();
            }
        }
    }

    /**
     * Generate the appropriate read MemCmd based on the Request flags.
     */
    static MemCmd
    makeReadCmd(const RequestPtr &req)
    {
        if (req->isHTMCmd()) {
            if (req->isHTMAbort())
                return MemCmd::HTMAbort;
            else
                return MemCmd::HTMReq;
        } else if (req->isLLSC())
            return MemCmd::LoadLockedReq;
        else if (req->isPrefetchEx())
            return MemCmd::SoftPFExReq;
        else if (req->isPrefetch())
            return MemCmd::SoftPFReq;
        else
            return MemCmd::ReadReq;
    }

    /**
     * Generate the appropriate write MemCmd based on the Request flags.
     */
    static MemCmd
    makeWriteCmd(const RequestPtr &req)
    {
        if (req->isLLSC())
            return MemCmd::StoreCondReq;
        else if (req->isSwap() || req->isAtomic())
            return MemCmd::SwapReq;
        else if (req->isCacheInvalidate()) {
          return req->isCacheClean() ? MemCmd::CleanInvalidReq :
              MemCmd::InvalidateReq;
        } else if (req->isCacheClean()) {
            return MemCmd::CleanSharedReq;
        } else
            return MemCmd::WriteReq;
    }

    /**
     * Constructor-like methods that return Packets based on Request objects.
     * Fine-tune the MemCmd type if it's not a vanilla read or write.
     */
    static PacketPtr
    createRead(const RequestPtr &req)
    {
        return new Packet(req, makeReadCmd(req));
    }

    static PacketPtr
    createWrite(const RequestPtr &req)
    {
        return new Packet(req, makeWriteCmd(req));
    }

    /**
     * clean up packet variables
     */
    ~Packet()
    {
        deleteData();
    }

    /**
     * Take a request packet and modify it in place to be suitable for
     * returning as a response to that request.
     */
    void
    makeResponse()
    {
        assert(needsResponse());
        assert(isRequest());
        cmd = cmd.responseCommand();

        // responses are never express, even if the snoop that
        // triggered them was
        flags.clear(EXPRESS_SNOOP);
    }

    void
    makeAtomicResponse()
    {
        makeResponse();
    }

    void
    makeTimingResponse()
    {
        makeResponse();
    }

    void
    setFunctionalResponseStatus(bool success)
    {
        if (!success) {
            if (isWrite()) {
                cmd = MemCmd::FunctionalWriteError;
            } else {
                cmd = MemCmd::FunctionalReadError;
            }
        }
    }

    void
    setSize(unsigned size)
    {
        assert(!flags.isSet(VALID_SIZE));

        this->size = size;
        flags.set(VALID_SIZE);
    }

    /**
     * Check if packet corresponds to a given block-aligned address and
     * address space.
     *
     * @param addr The address to compare against.
     * @param is_secure Whether addr belongs to the secure address space.
     * @param blk_size Block size in bytes.
     * @return Whether packet matches description.
     */
    bool matchBlockAddr(const Addr addr, const bool is_secure,
                        const int blk_size) const;

    /**
     * Check if this packet refers to the same block-aligned address and
     * address space as another packet.
     *
     * @param pkt The packet to compare against.
     * @param blk_size Block size in bytes.
     * @return Whether packet matches description.
     */
    bool matchBlockAddr(const PacketPtr pkt, const int blk_size) const;

    /**
     * Check if packet corresponds to a given address and address space.
     *
     * @param addr The address to compare against.
     * @param is_secure Whether addr belongs to the secure address space.
     * @return Whether packet matches description.
     */
    bool matchAddr(const Addr addr, const bool is_secure) const;

    /**
     * Check if this packet refers to the same address and address space as
     * another packet.
     *
     * @param pkt The packet to compare against.
     * @return Whether packet matches description.
     */
    bool matchAddr(const PacketPtr pkt) const;

  public:
    /**
     * @{
     * @name Data accessor mehtods
     */

    /**
     * Set the data pointer to the following value that should not be
     * freed. Static data allows us to do a single memcpy even if
     * multiple packets are required to get from source to destination
     * and back. In essence the pointer is set calling dataStatic on
     * the original packet, and whenever this packet is copied and
     * forwarded the same pointer is passed on. When a packet
     * eventually reaches the destination holding the data, it is
     * copied once into the location originally set. On the way back
     * to the source, no copies are necessary.
     */
    template <typename T>
    void
    dataStatic(T *p)
    {
        assert(flags.noneSet(STATIC_DATA|DYNAMIC_DATA));
        data = (PacketDataPtr)p;
        flags.set(STATIC_DATA);
    }

    /**
     * Set the data pointer to the following value that should not be
     * freed. This version of the function allows the pointer passed
     * to us to be const. To avoid issues down the line we cast the
     * constness away, the alternative would be to keep both a const
     * and non-const data pointer and cleverly choose between
     * them. Note that this is only allowed for static data.
     */
    template <typename T>
    void
    dataStaticConst(const T *p)
    {
        assert(flags.noneSet(STATIC_DATA|DYNAMIC_DATA));
        data = const_cast<PacketDataPtr>(p);
        flags.set(STATIC_DATA);
    }

    /**
     * Set the data pointer to a value that should have delete []
     * called on it. Dynamic data is local to this packet, and as the
     * packet travels from source to destination, forwarded packets
     * will allocate their own data. When a packet reaches the final
     * destination it will populate the dynamic data of that specific
     * packet, and on the way back towards the source, memcpy will be
     * invoked in every step where a new packet was created e.g. in
     * the caches. Ultimately when the response reaches the source a
     * final memcpy is needed to extract the data from the packet
     * before it is deallocated.
     */
    template <typename T>
    void
    dataDynamic(T *p)
    {
        assert(flags.noneSet(STATIC_DATA|DYNAMIC_DATA));
        data = (PacketDataPtr)p;
        flags.set(DYNAMIC_DATA);
    }

    /**
     * get a pointer to the data ptr.
     */
    template <typename T>
    T*
    getPtr()
    {
        assert(flags.isSet(STATIC_DATA|DYNAMIC_DATA));
        assert(!isMaskedWrite());
        return (T*)data;
    }

    template <typename T>
    const T*
    getConstPtr() const
    {
        assert(flags.isSet(STATIC_DATA|DYNAMIC_DATA));
        return (const T*)data;
    }

    /**
     * Get the data in the packet byte swapped from big endian to
     * host endian.
     */
    template <typename T>
    T getBE() const;

    /**
     * Get the data in the packet byte swapped from little endian to
     * host endian.
     */
    template <typename T>
    T getLE() const;

    /**
     * Get the data in the packet byte swapped from the specified
     * endianness.
     */
    template <typename T>
    T get(ByteOrder endian) const;

    /** Set the value in the data pointer to v as big endian. */
    template <typename T>
    void setBE(T v);

    /** Set the value in the data pointer to v as little endian. */
    template <typename T>
    void setLE(T v);

    /**
     * Set the value in the data pointer to v using the specified
     * endianness.
     */
    template <typename T>
    void set(T v, ByteOrder endian);

    /**
     * Get the data in the packet byte swapped from the specified
     * endianness and zero-extended to 64 bits.
     */
    uint64_t getUintX(ByteOrder endian) const;

    /**
     * Set the value in the word w after truncating it to the length
     * of the packet and then byteswapping it to the desired
     * endianness.
     */
    void setUintX(uint64_t w, ByteOrder endian);

    /**
     * Copy data into the packet from the provided pointer.
     */
    void
    setData(const uint8_t *p)
    {
        // we should never be copying data onto itself, which means we
        // must idenfity packets with static data, as they carry the
        // same pointer from source to destination and back
        assert(p != getPtr<uint8_t>() || flags.isSet(STATIC_DATA));

        if (p != getPtr<uint8_t>()) {
            // for packet with allocated dynamic data, we copy data from
            // one to the other, e.g. a forwarded response to a response
            std::memcpy(getPtr<uint8_t>(), p, getSize());
        }
    }

    /**
     * Copy data into the packet from the provided block pointer,
     * which is aligned to the given block size.
     */
    void
    setDataFromBlock(const uint8_t *blk_data, int blkSize)
    {
        setData(blk_data + getOffset(blkSize));
    }

    /**
     * Copy data from the packet to the memory at the provided pointer.
     * @param p Pointer to which data will be copied.
     */
    void
    writeData(uint8_t *p) const
    {
        if (!isMaskedWrite()) {
            std::memcpy(p, getConstPtr<uint8_t>(), getSize());
        } else {
            assert(req->getByteEnable().size() == getSize());
            // Write only the enabled bytes
            const uint8_t *base = getConstPtr<uint8_t>();
            for (int i = 0; i < getSize(); i++) {
                if (req->getByteEnable()[i]) {
                    p[i] = *(base + i);
                }
                // Disabled bytes stay untouched
            }
        }
    }

    /**
     * Copy data from the packet to the provided block pointer, which
     * is aligned to the given block size.
     * @param blk_data Pointer to block to which data will be copied.
     * @param blkSize Block size in bytes.
     */
    void
    writeDataToBlock(uint8_t *blk_data, int blkSize) const
    {
        writeData(blk_data + getOffset(blkSize));
    }

    /**
     * delete the data pointed to in the data pointer. Ok to call to
     * matter how data was allocted.
     */
    void
    deleteData()
    {
        if (flags.isSet(DYNAMIC_DATA))
            delete [] data;

        flags.clear(STATIC_DATA|DYNAMIC_DATA);
        data = NULL;
    }

    /** Allocate memory for the packet. */
    void
    allocate()
    {
        // if either this command or the response command has a data
        // payload, actually allocate space
        if (hasData() || hasRespData()) {
            assert(flags.noneSet(STATIC_DATA|DYNAMIC_DATA));
            flags.set(DYNAMIC_DATA);
            data = new uint8_t[getSize()];
        }
    }

    /** @} */

    /** Get the data in the packet without byte swapping. */
    template <typename T>
    T getRaw() const;

    /** Set the value in the data pointer to v without byte swapping. */
    template <typename T>
    void setRaw(T v);

  public:
    /**
     * Check a functional request against a memory value stored in
     * another packet (i.e. an in-transit request or
     * response). Returns true if the current packet is a read, and
     * the other packet provides the data, which is then copied to the
     * current packet. If the current packet is a write, and the other
     * packet intersects this one, then we update the data
     * accordingly.
     */
    bool
    trySatisfyFunctional(PacketPtr other)
    {
        if (other->isMaskedWrite()) {
            // Do not forward data if overlapping with a masked write
            if (_isSecure == other->isSecure() &&
                getAddr() <= (other->getAddr() + other->getSize() - 1) &&
                other->getAddr() <= (getAddr() + getSize() - 1)) {
                warn("Trying to check against a masked write, skipping."
                     " (addr: 0x%x, other addr: 0x%x)", getAddr(),
                     other->getAddr());
            }
            return false;
        }
        // all packets that are carrying a payload should have a valid
        // data pointer
        return trySatisfyFunctional(other, other->getAddr(), other->isSecure(),
                                    other->getSize(),
                                    other->hasData() ?
                                    other->getPtr<uint8_t>() : NULL);
    }

    /**
     * Does the request need to check for cached copies of the same block
     * in the memory hierarchy above.
     **/
    bool
    mustCheckAbove() const
    {
        return cmd == MemCmd::HardPFReq || isEviction();
    }

    /**
     * Is this packet a clean eviction, including both actual clean
     * evict packets, but also clean writebacks.
     */
    bool
    isCleanEviction() const
    {
        return cmd == MemCmd::CleanEvict || cmd == MemCmd::WritebackClean;
    }

    bool
    isMaskedWrite() const
    {
        return (cmd == MemCmd::WriteReq && req->isMasked());
    }

    /**
     * Check a functional request against a memory value represented
     * by a base/size pair and an associated data array. If the
     * current packet is a read, it may be satisfied by the memory
     * value. If the current packet is a write, it may update the
     * memory value.
     */
    bool
    trySatisfyFunctional(Printable *obj, Addr base, bool is_secure, int size,
                         uint8_t *_data);

    /**
     * Push label for PrintReq (safe to call unconditionally).
     */
    void
    pushLabel(const std::string &lbl)
    {
        if (isPrint())
            safe_cast<PrintReqState*>(senderState)->pushLabel(lbl);
    }

    /**
     * Pop label for PrintReq (safe to call unconditionally).
     */
    void
    popLabel()
    {
        if (isPrint())
            safe_cast<PrintReqState*>(senderState)->popLabel();
    }

    void print(std::ostream &o, int verbosity = 0,
               const std::string &prefix = "") const;

    /**
     * A no-args wrapper of print(std::ostream...)
     * meant to be invoked from DPRINTFs
     * avoiding string overheads in fast mode
     * @return string with the request's type and start<->end addresses
     */
    std::string print() const;

    // hardware transactional memory

    /**
     * Communicates to the core that a packet was processed by the memory
     * subsystem while running in transactional mode.
     * It may happen that the transaction has failed at the memory subsystem
     * and this needs to be communicated to the core somehow.
     * This function decorates the response packet with flags to indicate
     * such a situation has occurred.
     */
    void makeHtmTransactionalReqResponse(const HtmCacheFailure ret_code);

    /**
     * Stipulates that this packet/request originates in the CPU executing
     * in transactional mode, i.e. within a transaction.
     */
    void setHtmTransactional(uint64_t val);

    /**
     * Returns whether or not this packet/request originates in the CPU
     * executing in transactional mode, i.e. within a transaction.
     */
    bool isHtmTransactional() const;

    /**
     * If a packet/request originates in a CPU executing in transactional
     * mode, i.e. within a transaction, this function returns the unique ID
     * of the transaction. This is used for verifying correctness
     * and debugging.
     */
    uint64_t getHtmTransactionUid() const;

    /**
     * Stipulates that this packet/request has returned from the
     * cache hierarchy in a failed transaction. The core is
     * notified like this.
     */
    void setHtmTransactionFailedInCache(const HtmCacheFailure ret_code);

    /**
     * Returns whether or not this packet/request has returned from the
     * cache hierarchy in a failed transaction. The core is
     * notified liked this.
     */
    bool htmTransactionFailedInCache() const;

    /**
     * If a packet/request has returned from the cache hierarchy in a
     * failed transaction, this function returns the failure reason.
     */
    HtmCacheFailure getHtmTransactionFailedInCacheRC() const;
};

#endif //__MEM_PACKET_HH