diff --git a/configs/example/gem5_library/arm-ubuntu-boot-exit.py b/configs/example/gem5_library/arm-ubuntu-boot-exit.py
new file mode 100644
index 0000000..7125e48
--- /dev/null
+++ b/configs/example/gem5_library/arm-ubuntu-boot-exit.py
@@ -0,0 +1,149 @@
+# Copyright (c) 2022 The Regents of the University of California
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are
+# met: redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer;
+# redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in the
+# documentation and/or other materials provided with the distribution;
+# neither the name of the copyright holders nor the names of its
+# contributors may be used to endorse or promote products derived from
+# this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+"""
+This script shows an example of booting an ARM based full system Ubuntu
+disk image using the gem5's standard library. This simulation boots the disk
+image using 2 TIMING CPU cores. The simulation ends when the startup is
+completed successfully (i.e. when an `m5_exit instruction is reached on
+successful boot).
+
+Usage
+-----
+
+```
+scons build/ARM/gem5.opt -j<NUM_CPUS>
+./build/ARM/gem5.opt configs/example/gem5_library/arm-ubuntu-boot-exit.py
+```
+
+"""
+
+import os
+from gem5.isas import ISA
+from m5.objects import ArmDefaultRelease
+from gem5.utils.requires import requires
+from gem5.resources.resource import Resource
+from gem5.simulate.simulator import Simulator
+from m5.objects import VExpress_GEM5_Foundation
+from gem5.components.boards.arm_board import ArmBoard
+from gem5.components.memory import DualChannelDDR4_2400
+from gem5.components.processors.cpu_types import CPUTypes
+from gem5.resources.resource import CustomDiskImageResource
+from gem5.components.processors.simple_processor import SimpleProcessor
+
+# This runs a check to ensure the gem5 binary is compiled for ARM.
+
+requires(
+    isa_required=ISA.ARM,
+)
+
+# With ARM, we use simple caches.
+
+from gem5.components.cachehierarchies.classic\
+    .private_l1_private_l2_cache_hierarchy import (
+    PrivateL1PrivateL2CacheHierarchy,
+)
+
+
+# Here we setup the parameters of the l1 and l2 caches.
+
+cache_hierarchy = PrivateL1PrivateL2CacheHierarchy(
+    l1d_size="16kB",
+    l1i_size="16kB",
+    l2_size="256kB",
+)
+
+# Memory: Dual Channel DDR4 2400 DRAM device.
+
+memory = DualChannelDDR4_2400(size = "2GB")
+
+# Here we setup the processor. We use a simple TIMING processor. The config
+# script was also tested with ATOMIC processor.
+
+processor = SimpleProcessor(
+    cpu_type=CPUTypes.TIMING,
+    num_cores=2,
+)
+
+# The ArmBoard requires a `release` to be specified. This adds all the
+# extensions or features to the system. We are setting this to Armv8
+# (ArmDefaultRelease) in this example config script.
+
+release = ArmDefaultRelease()
+
+# The platform sets up the memory ranges of all the on-chip and off-chip
+# devices present on the ARM system.
+
+platform = VExpress_GEM5_Foundation()
+
+# Here we setup the board. The ArmBoard allows for Full-System ARM simulations.
+
+board = ArmBoard(
+    clk_freq = "3GHz",
+    processor = processor,
+    memory = memory,
+    cache_hierarchy = cache_hierarchy,
+    release = release,
+    platform = platform
+)
+
+# Here we set the Full System workload.
+
+# The `set_kernel_disk_workload` function on the ArmBoard accepts an ARM
+# kernel, a disk image, and, path to the bootloader.
+
+board.set_kernel_disk_workload(
+
+    # The ARM kernel will be automatically downloaded to the `~/.cache/gem5`
+    # directory if not already present. The arm-ubuntu-boot-exit was tested
+    # with `vmlinux.arm64`
+
+    kernel = Resource("arm64-linux-kernel-5.4.49"),
+
+    # The ARM ubuntu image will be automatically downloaded to the
+    # `~/.cache/gem5` directory if not already present.
+
+    disk_image = Resource("arm64-ubuntu-18.04-img"),
+
+    # We need to specify the path for the bootloader file `boot.arm64`.
+
+    bootloader = Resource("arm64-bootloader"),
+
+    # For the arm64-ubuntu-18.04.img, we need to specify the readfile content
+
+    readfile_contents = "m5 exit"
+)
+
+# We define the system with the aforementioned system defined.
+
+simulator = Simulator(board = board)
+
+# Once the system successfully boots, it encounters an
+# `m5_exit instruction encountered`. We stop the simulation then. When the
+# simulation has ended you may inspect `m5out/board.terminal` to see
+# the stdout.
+
+simulator.run()
diff --git a/src/python/SConscript b/src/python/SConscript
index 47e577a..b595ba9 100644
--- a/src/python/SConscript
+++ b/src/python/SConscript
@@ -50,6 +50,7 @@
 PySource('gem5.components.boards', 'gem5/components/boards/simple_board.py')
 PySource('gem5.components.boards', 'gem5/components/boards/test_board.py')
 PySource('gem5.components.boards', 'gem5/components/boards/x86_board.py')
+PySource('gem5.components.boards', 'gem5/components/boards/arm_board.py')
 PySource('gem5.components.boards',
     "gem5/components/boards/kernel_disk_workload.py")
 PySource('gem5.components.boards',
diff --git a/src/python/gem5/components/boards/arm_board.py b/src/python/gem5/components/boards/arm_board.py
new file mode 100644
index 0000000..73002e9
--- /dev/null
+++ b/src/python/gem5/components/boards/arm_board.py
@@ -0,0 +1,377 @@
+# Copyright (c) 2022 The Regents of the University of California
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are
+# met: redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer;
+# redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in the
+# documentation and/or other materials provided with the distribution;
+# neither the name of the copyright holders nor the names of its
+# contributors may be used to endorse or promote products derived from
+# this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+from m5.objects import (
+    Port,
+    IOXBar,
+    Bridge,
+    BadAddr,
+    Terminal,
+    PciVirtIO,
+    VncServer,
+    AddrRange,
+    ArmSystem,
+    ArmRelease,
+    ArmFsLinux,
+    VirtIOBlock,
+    CowDiskImage,
+    RawDiskImage,
+    VoltageDomain,
+    SrcClockDomain,
+    ArmDefaultRelease,
+    VExpress_GEM5_Base,
+    VExpress_GEM5_Foundation,
+)
+
+import os
+import m5
+from abc import ABCMeta
+from ...isas import ISA
+from typing import List
+from m5.util import fatal
+from ...utils.requires import requires
+from ...utils.override import overrides
+from .abstract_board import AbstractBoard
+from ...resources.resource import AbstractResource
+from .kernel_disk_workload import KernelDiskWorkload
+from ..cachehierarchies.classic.no_cache import NoCache
+from ..processors.abstract_processor import AbstractProcessor
+from ..memory.abstract_memory_system import AbstractMemorySystem
+from ..cachehierarchies.abstract_cache_hierarchy import AbstractCacheHierarchy
+
+class ArmBoard(ArmSystem, AbstractBoard, KernelDiskWorkload):
+    """
+    A board capable of full system simulation for ARM instructions. It is based
+    ARMv8.
+
+    The board is based on Arm Motherboard Express uATX (V2M-P1), Arm
+    CoreTile Express A15x2 (V2P-CA15) and on Armv8-A FVP Foundation platform
+    v11.8, depending on the simulated platform. These boards are parts of ARM's
+    Versatile(TM) Express family of boards.
+
+    **Limitations**
+    * The board currently does not support ruby caches.
+    * stage2 walker ports are ignored.
+    """
+    __metaclass__ = ABCMeta
+
+    def __init__(
+        self,
+        clk_freq: str,
+        processor: AbstractProcessor,
+        memory: AbstractMemorySystem,
+        cache_hierarchy: AbstractCacheHierarchy,
+        platform: VExpress_GEM5_Base = VExpress_GEM5_Foundation(),
+        release: ArmRelease = ArmDefaultRelease()
+    ) -> None:
+        super().__init__()
+        AbstractBoard.__init__(
+            self,
+            clk_freq = clk_freq,
+            processor = processor,
+            memory = memory,
+            cache_hierarchy = cache_hierarchy,
+        )
+
+        # This board requires ARM ISA to work.
+
+        requires(isa_required = ISA.ARM)
+
+        # Setting the voltage domain here.
+
+        self.voltage_domain = self.clk_domain.voltage_domain
+
+        # Setting up ARM release here. We use the ARM default release, which
+        # corresponds to an ARMv8 system.
+
+        self.release = release
+
+        # RealView sets up most of the on-chip and off-chip devices and GIC
+        # for the ARM board. These devices' iformation is also used to
+        # generate the dtb file.
+
+        self._setup_realview(platform)
+
+        # ArmBoard's memory can only be setup once realview is initialized.
+
+        self._setup_arm_memory_ranges()
+
+        # Setting multi_proc of ArmSystem by counting the number of processors.
+
+        if processor.get_num_cores() != 1:
+            self.multi_proc = False
+        else:
+            self.multi_proc = True
+
+    @overrides(AbstractBoard)
+    def _setup_board(self) -> None:
+
+        # This board is expected to run full-system simulation.
+        # Loading ArmFsLinux() from `src/arch/arm/ArmFsWorkload.py`
+
+        self.workload = ArmFsLinux()
+
+        # We are fixing the following variable for the ArmSystem to work. The
+        # security extension is checked while generating the dtb file in
+        # realview. This board does not have security extention enabled.
+
+        self._have_psci = False
+
+        # highest_el_is_64 is set to True. True if the register width of the
+        # highest implemented exception level is 64 bits.
+
+        self.highest_el_is_64 = True
+
+        # Setting up the voltage and the clock domain here for the ARM board.
+        # The ArmSystem/RealView expects voltage_domain to be a parameter.
+        # The voltage and the clock frequency are taken from the devices.py
+        # file from configs/example/arm
+
+        self.voltage_domain = VoltageDomain(voltage="1.0V")
+        self.clk_domain = SrcClockDomain(
+            clock="1GHz", voltage_domain=self.voltage_domain
+        )
+
+        # The ARM board supports both Terminal and VncServer.
+
+        self.terminal = Terminal()
+        self.vncserver = VncServer()
+
+        # Incoherent I/O Bus
+
+        self.iobus = IOXBar()
+        self.iobus.badaddr_responder = BadAddr()
+        self.iobus.default = self.iobus.badaddr_responder.pio
+
+    def _setup_io_devices(self) -> None:
+        """
+        This method connects the I/O devices to the I/O bus.
+        """
+
+        # We setup the iobridge for the ARM Board. The default
+        # cache_hierarchy's NoCache class has an iobridge has a latency of
+        # 10. We are using an iobridge with latency = 50ns, taken from the
+        # configs/example/arm/devices.py
+
+        self.iobridge = Bridge(delay="50ns")
+        self.iobridge.mem_side_port = self.iobus.cpu_side_ports
+        self.iobridge.cpu_side_port = (
+            self.cache_hierarchy.get_mem_side_port()
+        )
+
+        # We either have iocache or dmabridge depending upon the
+        # cache_hierarchy. If we have "NoCache", then we use the dmabridge.
+        # Otherwise, we use the iocache on the board.
+
+        if isinstance(self.cache_hierarchy, NoCache) is False:
+
+            # The ArmBoard does not support ruby caches.
+
+            if self.get_cache_hierarchy().is_ruby():
+                fatal("Ruby caches are not supported by the ArmBoard.")
+
+            # The classic caches are setup in the  _setup_io_cache() method,
+            # defined under the cachehierarchy class. Verified it with both
+            # PrivateL1PrivateL2CacheHierarchy and PrivateL1CacheHierarchy
+            # classes.
+
+        else:
+
+            # This corresponds to a machine without caches. We have a DMA
+            # beidge in this case. Parameters of this bridge are also taken
+            # from the common/example/arm/devices.py file.
+
+            self.dmabridge = Bridge(
+                delay="50ns", ranges=self.mem_ranges
+            )
+
+            self.dmabridge.mem_side_port = self.get_dma_ports()[0]
+            self.dmabridge.cpu_side_port = self.get_dma_ports()[1]
+
+        self.realview.attachOnChipIO(
+            self.cache_hierarchy.membus, self.iobridge
+        )
+        self.realview.attachIO(self.iobus)
+
+    def _setup_realview(self, platform) -> None:
+        """
+        Notes:
+        The ARM Board has realview platform. Most of the on-chip and
+        off-chip devices are setup by the RealView platform. Currently, there
+        are 5 different types of realview platforms supported by the ArmBoard.
+
+        :param platform: the user can specify the platform while instantiating
+        an ArmBoard object.
+        """
+
+        # Currently, the ArmBoard supports VExpress_GEM5_V1,
+        # VExpress_GEM5_V1_HDLcd and VExpress_GEM5_Foundation.
+        # VExpress_GEM5_V2 and VExpress_GEM5_V2_HDLcd are not supported by the
+        # ArmBoard.
+
+        self.realview = platform
+
+        # We need to setup the global interrupt controller (GIC) addr for the
+        # realview system.
+
+        if hasattr(self.realview.gic, "cpu_addr"):
+            self.gic_cpu_addr = self.realview.gic.cpu_addr
+
+    def _setup_io_cache(self):
+        pass
+
+    @overrides(AbstractBoard)
+    def has_io_bus(self) -> bool:
+        return True
+
+    @overrides(AbstractBoard)
+    def get_io_bus(self) -> IOXBar:
+        return [self.iobus.cpu_side_ports, self.iobus.mem_side_ports]
+
+    @overrides(AbstractBoard)
+    def has_coherent_io(self) -> bool:
+        return True
+
+    @overrides(AbstractBoard)
+    def get_mem_side_coherent_io_port(self) -> Port:
+        return self.iobus.mem_side_ports
+
+    @overrides(AbstractBoard)
+    def has_dma_ports(self) -> bool:
+        return True
+
+    def _setup_coherent_io_bridge(self, board: AbstractBoard) -> None:
+        pass
+
+    @overrides(AbstractBoard)
+    def get_dma_ports(self) -> List[Port]:
+        return [
+            self.cache_hierarchy.get_cpu_side_port(),
+            self.iobus.mem_side_ports
+        ]
+
+    @overrides(AbstractBoard)
+    def connect_system_port(self, port: Port) -> None:
+        self.system_port = port
+
+    @overrides(KernelDiskWorkload)
+    def get_disk_device(self):
+        return "/dev/vda"
+
+    @overrides(KernelDiskWorkload)
+    def _add_disk_to_board(self, disk_image: AbstractResource):
+
+        # We define the image.
+
+        image = CowDiskImage(
+            child=RawDiskImage(read_only=True), read_only=False
+        )
+
+        self.pci_devices = [PciVirtIO(vio=VirtIOBlock(image=image))]
+        self.realview.attachPciDevice(
+                self.pci_devices[0], self.iobus
+        )
+
+        # Now that the disk and workload are set, we can generate the device
+        # tree file. We will generate the dtb file everytime the board is
+        # boot-up.
+
+        image.child.image_file = disk_image.get_local_path()
+
+        # _setup_io_devices needs to be implemented.
+
+        self._setup_io_devices()
+
+        # Specifying the dtb file location to the workload.
+
+        self.workload.dtb_filename = os.path.join(
+                m5.options.outdir, "device.dtb"
+        )
+
+        # Calling generateDtb from class ArmSystem to add memory information to
+        # the dtb file.
+
+        self.generateDtb(self.workload.dtb_filename)
+
+        # Finally we need to setup the bootloader for the ArmBoard. An ARM
+        # system requires three inputs to simulate a full system: a disk image,
+        # the kernel file and the bootloader file(s).
+
+        self.realview.setupBootLoader(
+                self, self.workload.dtb_filename, self._bootloader)
+
+    def _get_memory_ranges(self, mem_size) -> list:
+        """
+        This method is taken from configs/example/arm/devices.py. It sets up
+        all the memory ranges for the board.
+        """
+        mem_ranges = []
+
+        for mem_range in self.realview._mem_regions:
+            size_in_range = min(mem_size, mem_range.size())
+            mem_ranges.append(
+                AddrRange(start = mem_range.start, size = size_in_range)
+            )
+
+            mem_size -= size_in_range
+            if mem_size == 0:
+                return mem_ranges
+
+        raise ValueError("Memory size too big for platform capabilities")
+
+    @overrides(AbstractBoard)
+    def _setup_memory_ranges(self) -> None:
+        """
+        The ArmBoard's memory can only be setup after realview is setup. Once
+        realview is initialized, we call _setup_arm_memory_ranges() to
+        correctly setup the memory ranges.
+        """
+        pass
+
+    def _setup_arm_memory_ranges(self) -> None:
+
+        # We setup the memory here. The memory size is specified in the run
+        # script that the user uses.
+
+        memory = self.get_memory()
+        mem_size = memory.get_size()
+
+        self.mem_ranges = self._get_memory_ranges(mem_size)
+        memory.set_memory_range(self.mem_ranges)
+
+    @overrides(KernelDiskWorkload)
+    def get_default_kernel_args(self) -> List[str]:
+
+        # The default kernel string is taken from the devices.py file.
+
+        return [
+            "console=ttyAMA0",
+            "lpj=19988480",
+            "norandmaps",
+            "root={root_value}",
+            "rw",
+            "mem=%s" % self.get_memory().get_size(),
+        ]
diff --git a/src/python/gem5/components/boards/kernel_disk_workload.py b/src/python/gem5/components/boards/kernel_disk_workload.py
index 1f4b8d7..23824d1 100644
--- a/src/python/gem5/components/boards/kernel_disk_workload.py
+++ b/src/python/gem5/components/boards/kernel_disk_workload.py
@@ -134,6 +134,7 @@
         self,
         kernel: AbstractResource,
         disk_image: AbstractResource,
+        bootloader: Optional[AbstractResource] = None,
         readfile: Optional[str] = None,
         readfile_contents: Optional[str] = None,
         kernel_args: Optional[List[str]] = None,
@@ -145,6 +146,8 @@
 
         :param kernel: The kernel to boot.
         :param disk_image: The disk image to mount.
+        :param bootloader: The current implementation of the ARM board requires
+        three resources to operate -- kernel, disk image, and, a bootloader.
         :param readfile: An optional parameter stating the file to be read by
         by `m5 readfile`.
         :param readfile_contents: An optional parameter stating the contents of
@@ -175,6 +178,13 @@
             root_value=self.get_default_kernel_root_val(disk_image=disk_image)
         )
 
+        # Setting the bootloader information for ARM board. The current
+        # implementation of the ArmBoard class expects a boot loader file to be
+        # provided along with the kernel and the disk image.
+
+        if bootloader is not None:
+            self._bootloader = [bootloader.get_local_path()]
+
         # Set the readfile.
         if readfile:
             self.readfile = readfile
@@ -190,4 +200,4 @@
         self._add_disk_to_board(disk_image=disk_image)
 
         # Set whether to exit on work items.
-        self.exit_on_work_items = exit_on_work_items
\ No newline at end of file
+        self.exit_on_work_items = exit_on_work_items
diff --git a/src/python/gem5/components/processors/simple_core.py b/src/python/gem5/components/processors/simple_core.py
index d4469e2..92290a3 100644
--- a/src/python/gem5/components/processors/simple_core.py
+++ b/src/python/gem5/components/processors/simple_core.py
@@ -79,7 +79,18 @@
 
     @overrides(AbstractCore)
     def connect_walker_ports(self, port1: Port, port2: Port) -> None:
-        self.core.mmu.connectWalkerPorts(port1, port2)
+        if self.get_isa() == ISA.ARM:
+
+            # Unlike X86 and RISCV MMU, the ARM MMU has two L1 TLB walker ports
+            # named `walker` and `stage2_walker` for both data and instruction.
+            # The gem5 standard library currently supports one TLB walker port
+            # per cache level. Therefore, we are explicitly setting the walker
+            # ports and not setting the stage2_walker ports for ARM systems.
+
+            self.core.mmu.itb_walker.port = port1
+            self.core.mmu.dtb_walker.port = port2
+        else:
+            self.core.mmu.connectWalkerPorts(port1, port2)
 
     @overrides(AbstractCore)
     def set_workload(self, process: Process) -> None:
diff --git a/tests/gem5/gem5_library_example_tests/test_gem5_library_examples.py b/tests/gem5/gem5_library_example_tests/test_gem5_library_examples.py
index f90a077..6db082a 100644
--- a/tests/gem5/gem5_library_example_tests/test_gem5_library_examples.py
+++ b/tests/gem5/gem5_library_example_tests/test_gem5_library_examples.py
@@ -195,3 +195,20 @@
     valid_hosts=constants.supported_hosts,
     length=constants.long_tag,
 )
+
+gem5_verify_config(
+    name="test-gem5-library-example-arm-ubuntu-boot-test",
+    fixtures=(),
+    verifiers=(),
+    config=joinpath(
+        config.base_dir,
+        "configs",
+        "example",
+        "gem5_library",
+        "arm-ubuntu-boot-exit.py",
+    ),
+    config_args=[],
+    valid_isas=(constants.arm_tag,),
+    valid_hosts=constants.supported_hosts,
+    length=constants.long_tag,
+)