# Copyright (c) 2013-2020 ARM Limited
# All rights reserved.
#
# The license below extends only to copyright in the software and shall
# not be construed as granting a license to any other intellectual
# property including but not limited to intellectual property relating
# to a hardware implementation of the functionality of the software
# licensed hereunder.  You may use the software subject to the license
# terms below provided that you ensure that this notice is replicated
# unmodified and in its entirety in all distributions of the software,
# modified or unmodified, in source code or in binary form.
#
# Copyright (c) 2006-2008 The Regents of The University of Michigan
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met: redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer;
# redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution;
# neither the name of the copyright holders nor the names of its
# contributors may be used to endorse or promote products derived from
# this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

import argparse

import m5
from m5.defines import buildEnv
from m5.objects import *

from common.Benchmarks import *
from common import ObjectList

vio_9p_help = """\
Enable the Virtio 9P device and set the path to share. The default 9p path is
m5ou5/9p/share, and it can be changed by setting VirtIO9p.root with --param. A
sample guest mount command is: "mount -t 9p -o
trans=virtio,version=9p2000.L,aname=<host-full-path> gem5 /mnt/9p" where
"<host-full-path>" is the full path being shared on the host, and "gem5" is a
fixed mount tag. This option requires the diod 9P server to be installed in the
host PATH or selected with with: VirtIO9PDiod.diod.
"""


class ListCpu(argparse.Action):
    def __call__(self, parser, namespace, values, option_string=None):
        ObjectList.cpu_list.print()
        sys.exit(0)


class ListBp(argparse.Action):
    def __call__(self, parser, namespace, values, option_string=None):
        ObjectList.bp_list.print()
        sys.exit(0)


class ListHWP(argparse.Action):
    def __call__(self, parser, namespace, values, option_string=None):
        ObjectList.hwp_list.print()
        sys.exit(0)


class ListRP(argparse.Action):
    def __call__(self, parser, namespace, values, option_string=None):
        ObjectList.rp_list.print()
        sys.exit(0)


class ListIndirectBP(argparse.Action):
    def __call__(self, parser, namespace, values, option_string=None):
        ObjectList.indirect_bp_list.print()
        sys.exit(0)


class ListMem(argparse.Action):
    def __call__(self, parser, namespace, values, option_string=None):
        ObjectList.mem_list.print()
        sys.exit(0)


class ListPlatform(argparse.Action):
    def __call__(self, parser, namespace, values, option_string=None):
        ObjectList.platform_list.print()
        sys.exit(0)


# Add the very basic options that work also in the case of the no ISA
# being used, and consequently no CPUs, but rather various types of
# testers and traffic generators.


def addNoISAOptions(parser):
    parser.add_argument("-n", "--num-cpus", type=int, default=1)
    parser.add_argument(
        "--sys-voltage",
        action="store",
        type=str,
        default="1.0V",
        help="""Top-level voltage for blocks running at system
                      power supply""",
    )
    parser.add_argument(
        "--sys-clock",
        action="store",
        type=str,
        default="1GHz",
        help="""Top-level clock for blocks running at system
                      speed""",
    )

    # Memory Options
    parser.add_argument(
        "--list-mem-types",
        action=ListMem,
        nargs=0,
        help="List available memory types",
    )
    parser.add_argument(
        "--mem-type",
        default="DDR3_1600_8x8",
        choices=ObjectList.mem_list.get_names(),
        help="type of memory to use",
    )
    parser.add_argument(
        "--mem-channels", type=int, default=1, help="number of memory channels"
    )
    parser.add_argument(
        "--mem-ranks",
        type=int,
        default=None,
        help="number of memory ranks per channel",
    )
    parser.add_argument(
        "--mem-size",
        action="store",
        type=str,
        default="512MB",
        help="Specify the physical memory size (single memory)",
    )
    parser.add_argument(
        "--enable-dram-powerdown",
        action="store_true",
        help="Enable low-power states in DRAMInterface",
    )
    parser.add_argument(
        "--mem-channels-intlv",
        type=int,
        default=0,
        help="Memory channels interleave",
    )

    parser.add_argument("--memchecker", action="store_true")

    # Cache Options
    parser.add_argument(
        "--external-memory-system",
        type=str,
        help="use external ports of this port_type for caches",
    )
    parser.add_argument(
        "--tlm-memory",
        type=str,
        help="use external port for SystemC TLM cosimulation",
    )
    parser.add_argument("--caches", action="store_true")
    parser.add_argument("--l2cache", action="store_true")
    parser.add_argument("--num-dirs", type=int, default=1)
    parser.add_argument("--num-l2caches", type=int, default=1)
    parser.add_argument("--num-l3caches", type=int, default=1)
    parser.add_argument("--l1d_size", type=str, default="64kB")
    parser.add_argument("--l1i_size", type=str, default="32kB")
    parser.add_argument("--l2_size", type=str, default="2MB")
    parser.add_argument("--l3_size", type=str, default="16MB")
    parser.add_argument("--l1d_assoc", type=int, default=2)
    parser.add_argument("--l1i_assoc", type=int, default=2)
    parser.add_argument("--l2_assoc", type=int, default=8)
    parser.add_argument("--l3_assoc", type=int, default=16)
    parser.add_argument("--cacheline_size", type=int, default=64)

    # Enable Ruby
    parser.add_argument("--ruby", action="store_true")

    # Run duration options
    parser.add_argument(
        "-m",
        "--abs-max-tick",
        type=int,
        default=m5.MaxTick,
        metavar="TICKS",
        help="Run to absolute simulated tick "
        "specified including ticks from a restored checkpoint",
    )
    parser.add_argument(
        "--rel-max-tick",
        type=int,
        default=None,
        metavar="TICKS",
        help="Simulate for specified number of"
        " ticks relative to the simulation start tick (e.g. if "
        "restoring a checkpoint)",
    )
    parser.add_argument(
        "--maxtime",
        type=float,
        default=None,
        help="Run to the specified absolute simulated time in " "seconds",
    )
    parser.add_argument(
        "-P",
        "--param",
        action="append",
        default=[],
        help="Set a SimObject parameter relative to the root node. "
        "An extended Python multi range slicing syntax can be used "
        "for arrays. For example: "
        "'system.cpu[0,1,3:8:2].max_insts_all_threads = 42' "
        "sets max_insts_all_threads for cpus 0, 1, 3, 5 and 7 "
        "Direct parameters of the root object are not accessible, "
        "only parameters of its children.",
    )


# Add common options that assume a non-NULL ISA.


def addCommonOptions(parser):
    # start by adding the base options that do not assume an ISA
    addNoISAOptions(parser)

    # system options
    parser.add_argument(
        "--list-cpu-types",
        action=ListCpu,
        nargs=0,
        help="List available CPU types",
    )
    parser.add_argument(
        "--cpu-type",
        default="AtomicSimpleCPU",
        choices=ObjectList.cpu_list.get_names(),
        help="type of cpu to run with",
    )
    parser.add_argument(
        "--list-bp-types",
        action=ListBp,
        nargs=0,
        help="List available branch predictor types",
    )
    parser.add_argument(
        "--list-indirect-bp-types",
        action=ListIndirectBP,
        nargs=0,
        help="List available indirect branch predictor types",
    )
    parser.add_argument(
        "--bp-type",
        default=None,
        choices=ObjectList.bp_list.get_names(),
        help="""
                        type of branch predictor to run with
                        (if not set, use the default branch predictor of
                        the selected CPU)""",
    )
    parser.add_argument(
        "--indirect-bp-type",
        default=None,
        choices=ObjectList.indirect_bp_list.get_names(),
        help="type of indirect branch predictor to run with",
    )

    parser.add_argument(
        "--list-rp-types",
        action=ListRP,
        nargs=0,
        help="List available replacement policy types",
    )

    parser.add_argument(
        "--list-hwp-types",
        action=ListHWP,
        nargs=0,
        help="List available hardware prefetcher types",
    )
    parser.add_argument(
        "--l1i-hwp-type",
        default=None,
        choices=ObjectList.hwp_list.get_names(),
        help="""
                        type of hardware prefetcher to use with the L1
                        instruction cache.
                        (if not set, use the default prefetcher of
                        the selected cache)""",
    )
    parser.add_argument(
        "--l1d-hwp-type",
        default=None,
        choices=ObjectList.hwp_list.get_names(),
        help="""
                        type of hardware prefetcher to use with the L1
                        data cache.
                        (if not set, use the default prefetcher of
                        the selected cache)""",
    )
    parser.add_argument(
        "--l2-hwp-type",
        default=None,
        choices=ObjectList.hwp_list.get_names(),
        help="""
                        type of hardware prefetcher to use with the L2 cache.
                        (if not set, use the default prefetcher of
                        the selected cache)""",
    )
    parser.add_argument("--checker", action="store_true")
    parser.add_argument(
        "--cpu-clock",
        action="store",
        type=str,
        default="2GHz",
        help="Clock for blocks running at CPU speed",
    )
    parser.add_argument(
        "--smt",
        action="store_true",
        default=False,
        help="""
                      Only used if multiple programs are specified. If true,
                      then the number of threads per cpu is same as the
                      number of programs.""",
    )
    parser.add_argument(
        "--elastic-trace-en",
        action="store_true",
        help="""Enable capture of data dependency and instruction
                      fetch traces using elastic trace probe.""",
    )
    # Trace file paths input to trace probe in a capture simulation and input
    # to Trace CPU in a replay simulation
    parser.add_argument(
        "--inst-trace-file",
        action="store",
        type=str,
        help="""Instruction fetch trace file input to
                      Elastic Trace probe in a capture simulation and
                      Trace CPU in a replay simulation""",
        default="",
    )
    parser.add_argument(
        "--data-trace-file",
        action="store",
        type=str,
        help="""Data dependency trace file input to
                      Elastic Trace probe in a capture simulation and
                      Trace CPU in a replay simulation""",
        default="",
    )

    # dist-gem5 options
    parser.add_argument(
        "--dist",
        action="store_true",
        help="Parallel distributed gem5 simulation.",
    )
    parser.add_argument(
        "--dist-sync-on-pseudo-op",
        action="store_true",
        help="Use a pseudo-op to start dist-gem5 synchronization.",
    )
    parser.add_argument(
        "--is-switch",
        action="store_true",
        help="Select the network switch simulator process for a"
        "distributed gem5 run",
    )
    parser.add_argument(
        "--dist-rank",
        default=0,
        action="store",
        type=int,
        help="Rank of this system within the dist gem5 run.",
    )
    parser.add_argument(
        "--dist-size",
        default=0,
        action="store",
        type=int,
        help="Number of gem5 processes within the dist gem5 run.",
    )
    parser.add_argument(
        "--dist-server-name",
        default="127.0.0.1",
        action="store",
        type=str,
        help="Name of the message server host\nDEFAULT: localhost",
    )
    parser.add_argument(
        "--dist-server-port",
        default=2200,
        action="store",
        type=int,
        help="Message server listen port\nDEFAULT: 2200",
    )
    parser.add_argument(
        "--dist-sync-repeat",
        default="0us",
        action="store",
        type=str,
        help="Repeat interval for synchronisation barriers among "
        "dist-gem5 processes\nDEFAULT: --ethernet-linkdelay",
    )
    parser.add_argument(
        "--dist-sync-start",
        default="5200000000000t",
        action="store",
        type=str,
        help="Time to schedule the first dist synchronisation barrier\n"
        "DEFAULT:5200000000000t",
    )
    parser.add_argument(
        "--ethernet-linkspeed",
        default="10Gbps",
        action="store",
        type=str,
        help="Link speed in bps\nDEFAULT: 10Gbps",
    )
    parser.add_argument(
        "--ethernet-linkdelay",
        default="10us",
        action="store",
        type=str,
        help="Link delay in seconds\nDEFAULT: 10us",
    )

    # Run duration options
    parser.add_argument(
        "-I",
        "--maxinsts",
        action="store",
        type=int,
        default=None,
        help="""Total number of instructions to
                                            simulate (default: run forever)""",
    )
    parser.add_argument(
        "--work-item-id",
        action="store",
        type=int,
        help="the specific work id for exit & checkpointing",
    )
    parser.add_argument(
        "--num-work-ids",
        action="store",
        type=int,
        help="Number of distinct work item types",
    )
    parser.add_argument(
        "--work-begin-cpu-id-exit",
        action="store",
        type=int,
        help="exit when work starts on the specified cpu",
    )
    parser.add_argument(
        "--work-end-exit-count",
        action="store",
        type=int,
        help="exit at specified work end count",
    )
    parser.add_argument(
        "--work-begin-exit-count",
        action="store",
        type=int,
        help="exit at specified work begin count",
    )
    parser.add_argument(
        "--init-param",
        action="store",
        type=int,
        default=0,
        help="""Parameter available in simulation with m5
                              initparam""",
    )
    parser.add_argument(
        "--initialize-only",
        action="store_true",
        default=False,
        help="""Exit after initialization. Do not simulate time.
                              Useful when gem5 is run as a library.""",
    )

    # Simpoint options
    parser.add_argument(
        "--simpoint-profile",
        action="store_true",
        help="Enable basic block profiling for SimPoints",
    )
    parser.add_argument(
        "--simpoint-interval",
        type=int,
        default=10000000,
        help="SimPoint interval in num of instructions",
    )
    parser.add_argument(
        "--take-simpoint-checkpoints",
        action="store",
        type=str,
        help="<simpoint file,weight file,interval-length,warmup-length>",
    )
    parser.add_argument(
        "--restore-simpoint-checkpoint",
        action="store_true",
        default=False,
        help="restore from a simpoint checkpoint taken with "
        + "--take-simpoint-checkpoints",
    )

    # Checkpointing options
    # Note that performing checkpointing via python script files will override
    # checkpoint instructions built into binaries.
    parser.add_argument(
        "--take-checkpoints",
        action="store",
        type=str,
        help="<M,N> take checkpoints at tick M and every N ticks thereafter",
    )
    parser.add_argument(
        "--max-checkpoints",
        action="store",
        type=int,
        help="the maximum number of checkpoints to drop",
        default=5,
    )
    parser.add_argument(
        "--checkpoint-dir",
        action="store",
        type=str,
        help="Place all checkpoints in this absolute directory",
    )
    parser.add_argument(
        "-r",
        "--checkpoint-restore",
        action="store",
        type=int,
        help="restore from checkpoint <N>",
    )
    parser.add_argument(
        "--checkpoint-at-end",
        action="store_true",
        help="take a checkpoint at end of run",
    )
    parser.add_argument(
        "--work-begin-checkpoint-count",
        action="store",
        type=int,
        help="checkpoint at specified work begin count",
    )
    parser.add_argument(
        "--work-end-checkpoint-count",
        action="store",
        type=int,
        help="checkpoint at specified work end count",
    )
    parser.add_argument(
        "--work-cpus-checkpoint-count",
        action="store",
        type=int,
        help="checkpoint and exit when active cpu count is reached",
    )
    parser.add_argument(
        "--restore-with-cpu",
        action="store",
        default="AtomicSimpleCPU",
        choices=ObjectList.cpu_list.get_names(),
        help="cpu type for restoring from a checkpoint",
    )

    # CPU Switching - default switch model goes from a checkpoint
    # to a timing simple CPU with caches to warm up, then to detailed CPU for
    # data measurement
    parser.add_argument(
        "--repeat-switch",
        action="store",
        type=int,
        default=None,
        help="switch back and forth between CPUs with period <N>",
    )
    parser.add_argument(
        "-s",
        "--standard-switch",
        action="store",
        type=int,
        default=None,
        help="switch from timing to Detailed CPU after warmup period of <N>",
    )
    parser.add_argument(
        "-p", "--prog-interval", type=str, help="CPU Progress Interval"
    )

    # Fastforwarding and simpoint related materials
    parser.add_argument(
        "-W",
        "--warmup-insts",
        action="store",
        type=int,
        default=None,
        help="Warmup period in total instructions (requires --standard-switch)",
    )
    parser.add_argument(
        "--bench",
        action="store",
        type=str,
        default=None,
        help="base names for --take-checkpoint and --checkpoint-restore",
    )
    parser.add_argument(
        "-F",
        "--fast-forward",
        action="store",
        type=str,
        default=None,
        help="Number of instructions to fast forward before switching",
    )
    parser.add_argument(
        "-S",
        "--simpoint",
        action="store_true",
        default=False,
        help="""Use workload simpoints as an instruction offset for
                --checkpoint-restore or --take-checkpoint.""",
    )
    parser.add_argument(
        "--at-instruction",
        action="store_true",
        default=False,
        help="""Treat value of --checkpoint-restore or --take-checkpoint as a
                number of instructions.""",
    )
    parser.add_argument(
        "--spec-input",
        default="ref",
        choices=["ref", "test", "train", "smred", "mdred", "lgred"],
        help="Input set size for SPEC CPU2000 benchmarks.",
    )
    parser.add_argument(
        "--arm-iset",
        default="arm",
        choices=["arm", "thumb", "aarch64"],
        help="ARM instruction set.",
    )
    parser.add_argument(
        "--stats-root",
        action="append",
        default=[],
        help="If given, dump only stats of objects under the given SimObject. "
        "SimObjects are identified with Python notation as in: "
        "system.cpu[0].mmu. All elements of an array can be selected at "
        "once with: system.cpu[:].mmu. If given multiple times, dump stats "
        "that are present under any of the roots. If not given, dump all "
        "stats. ",
    )
    parser.add_argument(
        "--override-vendor-string",
        action="store",
        type=str,
        default=None,
        help="Override vendor string returned by CPUID instruction in X86.",
    )


def addSEOptions(parser):
    # Benchmark options
    parser.add_argument(
        "-c",
        "--cmd",
        default="",
        help="The binary to run in syscall emulation mode.",
    )
    parser.add_argument(
        "-o",
        "--options",
        default="",
        help="""The options to pass to the binary, use " "
                              around the entire string""",
    )
    parser.add_argument(
        "-e",
        "--env",
        default="",
        help="Initialize workload environment from text file.",
    )
    parser.add_argument(
        "-i", "--input", default="", help="Read stdin from a file."
    )
    parser.add_argument(
        "--output", default="", help="Redirect stdout to a file."
    )
    parser.add_argument(
        "--errout", default="", help="Redirect stderr to a file."
    )
    parser.add_argument(
        "--chroot",
        action="store",
        type=str,
        default=None,
        help="The chroot option allows a user to alter the "
        "search path for processes running in SE mode. "
        "Normally, the search path would begin at the "
        "root of the filesystem (i.e. /). With chroot, "
        "a user can force the process to begin looking at"
        "some other location (i.e. /home/user/rand_dir)."
        "The intended use is to trick sophisticated "
        "software which queries the __HOST__ filesystem "
        "for information or functionality. Instead of "
        "finding files on the __HOST__ filesystem, the "
        "process will find the user's replacment files.",
    )
    parser.add_argument(
        "--interp-dir",
        action="store",
        type=str,
        default=None,
        help="The interp-dir option is used for "
        "setting the interpreter's path. This will "
        "allow to load the guest dynamic linker/loader "
        "itself from the elf binary. The option points to "
        "the parent folder of the guest /lib in the "
        "host fs",
    )

    parser.add_argument(
        "--redirects",
        action="append",
        type=str,
        default=[],
        help="A collection of one or more redirect paths "
        "to be used in syscall emulation."
        "Usage: gem5.opt [...] --redirects /dir1=/path/"
        "to/host/dir1 --redirects /dir2=/path/to/host/dir2",
    )
    parser.add_argument(
        "--wait-gdb",
        default=False,
        action="store_true",
        help="Wait for remote GDB to connect.",
    )


def addFSOptions(parser):
    from common.FSConfig import os_types

    # Simulation options
    parser.add_argument(
        "--timesync",
        action="store_true",
        help="Prevent simulated time from getting ahead of real time",
    )

    # System options
    parser.add_argument("--kernel", action="store", type=str)
    parser.add_argument(
        "--os-type",
        action="store",
        choices=os_types,
        default="linux",
        help="Specifies type of OS to boot",
    )
    parser.add_argument("--script", action="store", type=str)
    parser.add_argument(
        "--frame-capture",
        action="store_true",
        help="Stores changed frame buffers from the VNC server to compressed "
        "files in the gem5 output directory",
    )

    if buildEnv["USE_ARM_ISA"]:
        parser.add_argument(
            "--bare-metal",
            action="store_true",
            help="Provide the raw system without the linux specific bits",
        )
        parser.add_argument(
            "--list-machine-types",
            action=ListPlatform,
            nargs=0,
            help="List available platform types",
        )
        parser.add_argument(
            "--machine-type",
            action="store",
            choices=ObjectList.platform_list.get_names(),
            default="VExpress_GEM5_V1",
        )
        parser.add_argument(
            "--dtb-filename",
            action="store",
            type=str,
            help="Specifies device tree blob file to use with device-tree-"
            "enabled kernels",
        )
        parser.add_argument(
            "--enable-context-switch-stats-dump",
            action="store_true",
            help="Enable stats dump at context "
            "switches and dump tasks file (required for Streamline)",
        )
        parser.add_argument("--vio-9p", action="store_true", help=vio_9p_help)
        parser.add_argument(
            "--bootloader",
            action="append",
            help="executable file that runs before the --kernel",
        )

    # Benchmark options
    parser.add_argument(
        "--dual",
        action="store_true",
        help="Simulate two systems attached with an ethernet link",
    )
    parser.add_argument(
        "-b",
        "--benchmark",
        action="store",
        type=str,
        dest="benchmark",
        help="Specify the benchmark to run. Available benchmarks: %s"
        % DefinedBenchmarks,
    )

    # Metafile options
    parser.add_argument(
        "--etherdump",
        action="store",
        type=str,
        dest="etherdump",
        help="Specify the filename to dump a pcap capture of the"
        "ethernet traffic",
    )

    # Disk Image Options
    parser.add_argument(
        "--disk-image",
        action="append",
        type=str,
        default=[],
        help="Path to the disk images to use.",
    )
    parser.add_argument(
        "--root-device",
        action="store",
        type=str,
        default=None,
        help="OS device name for root partition",
    )

    # Command line options
    parser.add_argument(
        "--command-line",
        action="store",
        type=str,
        default=None,
        help="Template for the kernel command line.",
    )
    parser.add_argument(
        "--command-line-file",
        action="store",
        default=None,
        type=str,
        help="File with a template for the kernel command line",
    )

    # Debug option
    parser.add_argument(
        "--wait-gdb",
        default=False,
        action="store_true",
        help="Wait for remote GDB to connect.",
    )