blob: b5fb9ff8474e83369c01126d41040b21f5a79b52 [file] [log] [blame]
# Copyright (c) 2015 Advanced Micro Devices, Inc.
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
#
# 1. Redistributions of source code must retain the above copyright notice,
# this list of conditions and the following disclaimer.
#
# 2. Redistributions in binary form must reproduce the above copyright notice,
# this list of conditions and the following disclaimer in the documentation
# and/or other materials provided with the distribution.
#
# 3. Neither the name of the copyright holder nor the names of its
# contributors may be used to endorse or promote products derived from this
# software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
import argparse, os, re, getpass
import math
import glob
import inspect
import m5
from m5.objects import *
from m5.util import addToPath
addToPath('../')
from ruby import Ruby
from common import Options
from common import Simulation
from common import GPUTLBOptions, GPUTLBConfig
import hsaTopology
from common import FileSystemConfig
# Adding script options
parser = argparse.ArgumentParser()
Options.addCommonOptions(parser)
Options.addSEOptions(parser)
parser.add_argument("--cpu-only-mode", action="store_true", default=False,
help="APU mode. Used to take care of problems in "
"Ruby.py while running APU protocols")
parser.add_argument("-u", "--num-compute-units", type=int, default=4,
help="number of GPU compute units"),
parser.add_argument("--num-cp", type=int, default=0,
help="Number of GPU Command Processors (CP)")
parser.add_argument("--benchmark-root",
help="Root of benchmark directory tree")
# not super important now, but to avoid putting the number 4 everywhere, make
# it an option/knob
parser.add_argument("--cu-per-sqc", type=int, default=4, help="number of CUs"
"sharing an SQC (icache, and thus icache TLB)")
parser.add_argument('--cu-per-scalar-cache', type=int, default=4,
help='Number of CUs sharing a scalar cache')
parser.add_argument("--simds-per-cu", type=int, default=4, help="SIMD units"
"per CU")
parser.add_argument('--cu-per-sa', type=int, default=4,
help='Number of CUs per shader array. This must be a '
'multiple of options.cu-per-sqc and options.cu-per-scalar')
parser.add_argument('--sa-per-complex', type=int, default=1,
help='Number of shader arrays per complex')
parser.add_argument('--num-gpu-complexes', type=int, default=1,
help='Number of GPU complexes')
parser.add_argument("--wf-size", type=int, default=64,
help="Wavefront size(in workitems)")
parser.add_argument("--sp-bypass-path-length", type=int, default=4,
help="Number of stages of bypass path in vector ALU for "
"Single Precision ops")
parser.add_argument("--dp-bypass-path-length", type=int, default=4,
help="Number of stages of bypass path in vector ALU for "
"Double Precision ops")
# issue period per SIMD unit: number of cycles before issuing another vector
parser.add_argument(
"--issue-period", type=int, default=4,
help="Number of cycles per vector instruction issue period")
parser.add_argument("--glbmem-wr-bus-width", type=int, default=32,
help="VGPR to Coalescer (Global Memory) data bus width "
"in bytes")
parser.add_argument("--glbmem-rd-bus-width", type=int, default=32,
help="Coalescer to VGPR (Global Memory) data bus width in "
"bytes")
# Currently we only support 1 local memory pipe
parser.add_argument("--shr-mem-pipes-per-cu", type=int, default=1,
help="Number of Shared Memory pipelines per CU")
# Currently we only support 1 global memory pipe
parser.add_argument("--glb-mem-pipes-per-cu", type=int, default=1,
help="Number of Global Memory pipelines per CU")
parser.add_argument("--wfs-per-simd", type=int, default=10, help="Number of "
"WF slots per SIMD")
parser.add_argument("--registerManagerPolicy", type=str, default="static",
help="Register manager policy")
parser.add_argument("--vreg-file-size", type=int, default=2048,
help="number of physical vector registers per SIMD")
parser.add_argument("--vreg-min-alloc", type=int, default=4,
help="Minimum number of registers that can be allocated "
"from the VRF. The total number of registers will be "
"aligned to this value.")
parser.add_argument("--sreg-file-size", type=int, default=2048,
help="number of physical vector registers per SIMD")
parser.add_argument("--sreg-min-alloc", type=int, default=4,
help="Minimum number of registers that can be allocated "
"from the SRF. The total number of registers will be "
"aligned to this value.")
parser.add_argument("--bw-scalor", type=int, default=0,
help="bandwidth scalor for scalability analysis")
parser.add_argument("--CPUClock", type=str, default="2GHz",
help="CPU clock")
parser.add_argument("--gpu-clock", type=str, default="1GHz",
help="GPU clock")
parser.add_argument("--cpu-voltage", action="store", type=str,
default='1.0V',
help="""CPU voltage domain""")
parser.add_argument("--gpu-voltage", action="store", type=str,
default='1.0V',
help="""CPU voltage domain""")
parser.add_argument("--CUExecPolicy", type=str, default="OLDEST-FIRST",
help="WF exec policy (OLDEST-FIRST, ROUND-ROBIN)")
parser.add_argument("--SegFaultDebug", action="store_true",
help="checks for GPU seg fault before TLB access")
parser.add_argument("--FunctionalTLB", action="store_true",
help="Assumes TLB has no latency")
parser.add_argument("--LocalMemBarrier", action="store_true",
help="Barrier does not wait for writethroughs to complete")
parser.add_argument(
"--countPages", action="store_true",
help="Count Page Accesses and output in per-CU output files")
parser.add_argument("--TLB-prefetch", type=int, help="prefetch depth for"
"TLBs")
parser.add_argument("--pf-type", type=str, help="type of prefetch: "
"PF_CU, PF_WF, PF_PHASE, PF_STRIDE")
parser.add_argument("--pf-stride", type=int, help="set prefetch stride")
parser.add_argument("--numLdsBanks", type=int, default=32,
help="number of physical banks per LDS module")
parser.add_argument("--ldsBankConflictPenalty", type=int, default=1,
help="number of cycles per LDS bank conflict")
parser.add_argument("--lds-size", type=int, default=65536,
help="Size of the LDS in bytes")
parser.add_argument('--fast-forward-pseudo-op', action='store_true',
help='fast forward using kvm until the m5_switchcpu'
' pseudo-op is encountered, then switch cpus. subsequent'
' m5_switchcpu pseudo-ops will toggle back and forth')
parser.add_argument("--num-hw-queues", type=int, default=10,
help="number of hw queues in packet processor")
parser.add_argument("--reg-alloc-policy", type=str, default="dynamic",
help="register allocation policy (simple/dynamic)")
parser.add_argument("--dgpu", action="store_true", default=False,
help="Configure the system as a dGPU instead of an APU. "
"The dGPU config has its own local memory pool and is not "
"coherent with the host through hardware. Data is "
"transfered from host to device memory using runtime calls "
"that copy data over a PCIe-like IO bus.")
# Mtype option
#-- 1 1 1 C_RW_S (Cached-ReadWrite-Shared)
#-- 1 1 0 C_RW_US (Cached-ReadWrite-Unshared)
#-- 1 0 1 C_RO_S (Cached-ReadOnly-Shared)
#-- 1 0 0 C_RO_US (Cached-ReadOnly-Unshared)
#-- 0 1 x UC_L2 (Uncached_GL2)
#-- 0 0 x UC_All (Uncached_All_Load)
# default value: 5/C_RO_S (only allow caching in GL2 for read. Shared)
parser.add_argument("--m-type", type=int, default=5,
help="Default Mtype for GPU memory accesses. This is the "
"value used for all memory accesses on an APU and is the "
"default mode for dGPU unless explicitly overwritten by "
"the driver on a per-page basis. Valid values are "
"between 0-7")
parser.add_argument("--gfx-version", type=str, default='gfx801',
choices=GfxVersion.vals,
help="Gfx version for gpu"
"Note: gfx902 is not fully supported by ROCm")
Ruby.define_options(parser)
# add TLB options to the parser
GPUTLBOptions.tlb_options(parser)
args = parser.parse_args()
# The GPU cache coherence protocols only work with the backing store
args.access_backing_store = True
# if benchmark root is specified explicitly, that overrides the search path
if args.benchmark_root:
benchmark_path = [args.benchmark_root]
else:
# Set default benchmark search path to current dir
benchmark_path = ['.']
########################## Sanity Check ########################
# Currently the gpu model requires ruby
if buildEnv['PROTOCOL'] == 'None':
fatal("GPU model requires ruby")
# Currently the gpu model requires only timing or detailed CPU
if not (args.cpu_type == "TimingSimpleCPU" or
args.cpu_type == "DerivO3CPU"):
fatal("GPU model requires TimingSimpleCPU or DerivO3CPU")
# This file can support multiple compute units
assert(args.num_compute_units >= 1)
# Currently, the sqc (I-Cache of GPU) is shared by
# multiple compute units(CUs). The protocol works just fine
# even if sqc is not shared. Overriding this option here
# so that the user need not explicitly set this (assuming
# sharing sqc is the common usage)
n_cu = args.num_compute_units
num_sqc = int(math.ceil(float(n_cu) / args.cu_per_sqc))
args.num_sqc = num_sqc # pass this to Ruby
num_scalar_cache = int(math.ceil(float(n_cu) / args.cu_per_scalar_cache))
args.num_scalar_cache = num_scalar_cache
print('Num SQC = ', num_sqc, 'Num scalar caches = ', num_scalar_cache,
'Num CU = ', n_cu)
########################## Creating the GPU system ########################
# shader is the GPU
shader = Shader(n_wf = args.wfs_per_simd,
clk_domain = SrcClockDomain(
clock = args.gpu_clock,
voltage_domain = VoltageDomain(
voltage = args.gpu_voltage)))
# VIPER GPU protocol implements release consistency at GPU side. So,
# we make their writes visible to the global memory and should read
# from global memory during kernal boundary. The pipeline initiates
# (or do not initiate) the acquire/release operation depending on
# these impl_kern_launch_rel and impl_kern_end_rel flags. The flag=true
# means pipeline initiates a acquire/release operation at kernel launch/end.
# VIPER protocol is write-through based, and thus only impl_kern_launch_acq
# needs to set.
if (buildEnv['PROTOCOL'] == 'GPU_VIPER'):
shader.impl_kern_launch_acq = True
shader.impl_kern_end_rel = False
else:
shader.impl_kern_launch_acq = True
shader.impl_kern_end_rel = True
# Switching off per-lane TLB by default
per_lane = False
if args.TLB_config == "perLane":
per_lane = True
# List of compute units; one GPU can have multiple compute units
compute_units = []
for i in range(n_cu):
compute_units.append(ComputeUnit(cu_id = i, perLaneTLB = per_lane,
num_SIMDs = args.simds_per_cu,
wf_size = args.wf_size,
spbypass_pipe_length = \
args.sp_bypass_path_length,
dpbypass_pipe_length = \
args.dp_bypass_path_length,
issue_period = args.issue_period,
coalescer_to_vrf_bus_width = \
args.glbmem_rd_bus_width,
vrf_to_coalescer_bus_width = \
args.glbmem_wr_bus_width,
num_global_mem_pipes = \
args.glb_mem_pipes_per_cu,
num_shared_mem_pipes = \
args.shr_mem_pipes_per_cu,
n_wf = args.wfs_per_simd,
execPolicy = args.CUExecPolicy,
debugSegFault = args.SegFaultDebug,
functionalTLB = args.FunctionalTLB,
localMemBarrier = args.LocalMemBarrier,
countPages = args.countPages,
localDataStore = \
LdsState(banks = args.numLdsBanks,
bankConflictPenalty = \
args.ldsBankConflictPenalty,
size = args.lds_size)))
wavefronts = []
vrfs = []
vrf_pool_mgrs = []
srfs = []
srf_pool_mgrs = []
for j in range(args.simds_per_cu):
for k in range(shader.n_wf):
wavefronts.append(Wavefront(simdId = j, wf_slot_id = k,
wf_size = args.wf_size))
if args.reg_alloc_policy == "simple":
vrf_pool_mgrs.append(SimplePoolManager(pool_size = \
args.vreg_file_size,
min_alloc = \
args.vreg_min_alloc))
srf_pool_mgrs.append(SimplePoolManager(pool_size = \
args.sreg_file_size,
min_alloc = \
args.vreg_min_alloc))
elif args.reg_alloc_policy == "dynamic":
vrf_pool_mgrs.append(DynPoolManager(pool_size = \
args.vreg_file_size,
min_alloc = \
args.vreg_min_alloc))
srf_pool_mgrs.append(DynPoolManager(pool_size = \
args.sreg_file_size,
min_alloc = \
args.vreg_min_alloc))
vrfs.append(VectorRegisterFile(simd_id=j, wf_size=args.wf_size,
num_regs=args.vreg_file_size))
srfs.append(ScalarRegisterFile(simd_id=j, wf_size=args.wf_size,
num_regs=args.sreg_file_size))
compute_units[-1].wavefronts = wavefronts
compute_units[-1].vector_register_file = vrfs
compute_units[-1].scalar_register_file = srfs
compute_units[-1].register_manager = \
RegisterManager(policy=args.registerManagerPolicy,
vrf_pool_managers=vrf_pool_mgrs,
srf_pool_managers=srf_pool_mgrs)
if args.TLB_prefetch:
compute_units[-1].prefetch_depth = args.TLB_prefetch
compute_units[-1].prefetch_prev_type = args.pf_type
# attach the LDS and the CU to the bus (actually a Bridge)
compute_units[-1].ldsPort = compute_units[-1].ldsBus.cpu_side_port
compute_units[-1].ldsBus.mem_side_port = \
compute_units[-1].localDataStore.cuPort
# Attach compute units to GPU
shader.CUs = compute_units
########################## Creating the CPU system ########################
# The shader core will be whatever is after the CPU cores are accounted for
shader_idx = args.num_cpus
# The command processor will be whatever is after the shader is accounted for
cp_idx = shader_idx + 1
cp_list = []
# List of CPUs
cpu_list = []
CpuClass, mem_mode = Simulation.getCPUClass(args.cpu_type)
if CpuClass == AtomicSimpleCPU:
fatal("AtomicSimpleCPU is not supported")
if mem_mode != 'timing':
fatal("Only the timing memory mode is supported")
shader.timing = True
if args.fast_forward and args.fast_forward_pseudo_op:
fatal("Cannot fast-forward based both on the number of instructions and"
" on pseudo-ops")
fast_forward = args.fast_forward or args.fast_forward_pseudo_op
if fast_forward:
FutureCpuClass, future_mem_mode = CpuClass, mem_mode
CpuClass = X86KvmCPU
mem_mode = 'atomic_noncaching'
# Leave shader.timing untouched, because its value only matters at the
# start of the simulation and because we require switching cpus
# *before* the first kernel launch.
future_cpu_list = []
# Initial CPUs to be used during fast-forwarding.
for i in range(args.num_cpus):
cpu = CpuClass(cpu_id = i,
clk_domain = SrcClockDomain(
clock = args.CPUClock,
voltage_domain = VoltageDomain(
voltage = args.cpu_voltage)))
cpu_list.append(cpu)
if args.fast_forward:
cpu.max_insts_any_thread = int(args.fast_forward)
if fast_forward:
MainCpuClass = FutureCpuClass
else:
MainCpuClass = CpuClass
# CPs to be used throughout the simulation.
for i in range(args.num_cp):
cp = MainCpuClass(cpu_id = args.num_cpus + i,
clk_domain = SrcClockDomain(
clock = args.CPUClock,
voltage_domain = VoltageDomain(
voltage = args.cpu_voltage)))
cp_list.append(cp)
# Main CPUs (to be used after fast-forwarding if fast-forwarding is specified).
for i in range(args.num_cpus):
cpu = MainCpuClass(cpu_id = i,
clk_domain = SrcClockDomain(
clock = args.CPUClock,
voltage_domain = VoltageDomain(
voltage = args.cpu_voltage)))
if fast_forward:
cpu.switched_out = True
future_cpu_list.append(cpu)
else:
cpu_list.append(cpu)
host_cpu = cpu_list[0]
hsapp_gpu_map_vaddr = 0x200000000
hsapp_gpu_map_size = 0x1000
hsapp_gpu_map_paddr = int(Addr(args.mem_size))
if args.dgpu:
# Default --m-type for dGPU is write-back gl2 with system coherence
# (coherence at the level of the system directory between other dGPUs and
# CPUs) managed by kernel boundary flush operations targeting the gl2.
args.m_type = 6
# HSA kernel mode driver
# dGPUPoolID is 0 because we only have one memory pool
gpu_driver = GPUComputeDriver(filename = "kfd", isdGPU = args.dgpu,
gfxVersion = args.gfx_version,
dGPUPoolID = 0, m_type = args.m_type)
renderDriNum = 128
render_driver = GPURenderDriver(filename = f'dri/renderD{renderDriNum}')
# Creating the GPU kernel launching components: that is the HSA
# packet processor (HSAPP), GPU command processor (CP), and the
# dispatcher.
gpu_hsapp = HSAPacketProcessor(pioAddr=hsapp_gpu_map_paddr,
numHWQueues=args.num_hw_queues)
dispatcher = GPUDispatcher()
gpu_cmd_proc = GPUCommandProcessor(hsapp=gpu_hsapp,
dispatcher=dispatcher)
gpu_driver.device = gpu_cmd_proc
shader.dispatcher = dispatcher
shader.gpu_cmd_proc = gpu_cmd_proc
# Create and assign the workload Check for rel_path in elements of
# base_list using test, returning the first full path that satisfies test
def find_path(base_list, rel_path, test):
for base in base_list:
if not base:
# base could be None if environment var not set
continue
full_path = os.path.join(base, rel_path)
if test(full_path):
return full_path
fatal("%s not found in %s" % (rel_path, base_list))
def find_file(base_list, rel_path):
return find_path(base_list, rel_path, os.path.isfile)
executable = find_path(benchmark_path, args.cmd, os.path.exists)
# It's common for a benchmark to be in a directory with the same
# name as the executable, so we handle that automatically
if os.path.isdir(executable):
benchmark_path = [executable]
executable = find_file(benchmark_path, args.cmd)
if args.env:
with open(args.env, 'r') as f:
env = [line.rstrip() for line in f]
else:
env = ['LD_LIBRARY_PATH=%s' % ':'.join([
os.getenv('ROCM_PATH','/opt/rocm')+'/lib',
os.getenv('HCC_HOME','/opt/rocm/hcc')+'/lib',
os.getenv('HSA_PATH','/opt/rocm/hsa')+'/lib',
os.getenv('HIP_PATH','/opt/rocm/hip')+'/lib',
os.getenv('ROCM_PATH','/opt/rocm')+'/libhsakmt/lib',
os.getenv('ROCM_PATH','/opt/rocm')+'/miopen/lib',
os.getenv('ROCM_PATH','/opt/rocm')+'/miopengemm/lib',
os.getenv('ROCM_PATH','/opt/rocm')+'/hipblas/lib',
os.getenv('ROCM_PATH','/opt/rocm')+'/rocblas/lib',
"/usr/lib/x86_64-linux-gnu"
]),
'HOME=%s' % os.getenv('HOME','/'),
# Disable the VM fault handler signal creation for dGPUs also
# forces the use of DefaultSignals instead of driver-controlled
# InteruptSignals throughout the runtime. DefaultSignals poll
# on memory in the runtime, while InteruptSignals call into the
# driver.
"HSA_ENABLE_INTERRUPT=1",
# We don't have an SDMA hardware model, so need to fallback to
# vector copy kernels for dGPU memcopies to/from host and device.
"HSA_ENABLE_SDMA=0"]
process = Process(executable = executable, cmd = [args.cmd]
+ args.options.split(),
drivers = [gpu_driver, render_driver], env = env)
for cpu in cpu_list:
cpu.createThreads()
cpu.workload = process
for cp in cp_list:
cp.workload = host_cpu.workload
if fast_forward:
for i in range(len(future_cpu_list)):
future_cpu_list[i].workload = cpu_list[i].workload
future_cpu_list[i].createThreads()
########################## Create the overall system ########################
# List of CPUs that must be switched when moving between KVM and simulation
if fast_forward:
switch_cpu_list = \
[(cpu_list[i], future_cpu_list[i]) for i in range(args.num_cpus)]
# Full list of processing cores in the system.
cpu_list = cpu_list + [shader] + cp_list
# creating the overall system
# notice the cpu list is explicitly added as a parameter to System
system = System(cpu = cpu_list,
mem_ranges = [AddrRange(args.mem_size)],
cache_line_size = args.cacheline_size,
mem_mode = mem_mode,
workload = SEWorkload.init_compatible(executable))
if fast_forward:
system.future_cpu = future_cpu_list
system.voltage_domain = VoltageDomain(voltage = args.sys_voltage)
system.clk_domain = SrcClockDomain(clock = args.sys_clock,
voltage_domain = system.voltage_domain)
if fast_forward:
have_kvm_support = 'BaseKvmCPU' in globals()
if have_kvm_support and buildEnv['TARGET_ISA'] == "x86":
system.vm = KvmVM()
system.m5ops_base = 0xffff0000
for i in range(len(host_cpu.workload)):
host_cpu.workload[i].useArchPT = True
host_cpu.workload[i].kvmInSE = True
else:
fatal("KvmCPU can only be used in SE mode with x86")
# configure the TLB hierarchy
GPUTLBConfig.config_tlb_hierarchy(args, system, shader_idx)
# create Ruby system
system.piobus = IOXBar(width=32, response_latency=0,
frontend_latency=0, forward_latency=0)
dma_list = [gpu_hsapp, gpu_cmd_proc]
Ruby.create_system(args, None, system, None, dma_list, None)
system.ruby.clk_domain = SrcClockDomain(clock = args.ruby_clock,
voltage_domain = system.voltage_domain)
gpu_cmd_proc.pio = system.piobus.mem_side_ports
gpu_hsapp.pio = system.piobus.mem_side_ports
for i, dma_device in enumerate(dma_list):
exec('system.dma_cntrl%d.clk_domain = system.ruby.clk_domain' % i)
# attach the CPU ports to Ruby
for i in range(args.num_cpus):
ruby_port = system.ruby._cpu_ports[i]
# Create interrupt controller
system.cpu[i].createInterruptController()
# Connect cache port's to ruby
system.cpu[i].icache_port = ruby_port.in_ports
system.cpu[i].dcache_port = ruby_port.in_ports
ruby_port.mem_request_port = system.piobus.cpu_side_ports
if buildEnv['TARGET_ISA'] == "x86":
system.cpu[i].interrupts[0].pio = system.piobus.mem_side_ports
system.cpu[i].interrupts[0].int_requestor = \
system.piobus.cpu_side_ports
system.cpu[i].interrupts[0].int_responder = \
system.piobus.mem_side_ports
if fast_forward:
system.cpu[i].mmu.connectWalkerPorts(
ruby_port.in_ports, ruby_port.in_ports)
# attach CU ports to Ruby
# Because of the peculiarities of the CP core, you may have 1 CPU but 2
# sequencers and thus 2 _cpu_ports created. Your GPUs shouldn't be
# hooked up until after the CP. To make this script generic, figure out
# the index as below, but note that this assumes there is one sequencer
# per compute unit and one sequencer per SQC for the math to work out
# correctly.
gpu_port_idx = len(system.ruby._cpu_ports) \
- args.num_compute_units - args.num_sqc \
- args.num_scalar_cache
gpu_port_idx = gpu_port_idx - args.num_cp * 2
# Connect token ports. For this we need to search through the list of all
# sequencers, since the TCP coalescers will not necessarily be first. Only
# TCP coalescers use a token port for back pressure.
token_port_idx = 0
for i in range(len(system.ruby._cpu_ports)):
if isinstance(system.ruby._cpu_ports[i], VIPERCoalescer):
system.cpu[shader_idx].CUs[token_port_idx].gmTokenPort = \
system.ruby._cpu_ports[i].gmTokenPort
token_port_idx += 1
wavefront_size = args.wf_size
for i in range(n_cu):
# The pipeline issues wavefront_size number of uncoalesced requests
# in one GPU issue cycle. Hence wavefront_size mem ports.
for j in range(wavefront_size):
system.cpu[shader_idx].CUs[i].memory_port[j] = \
system.ruby._cpu_ports[gpu_port_idx].in_ports[j]
gpu_port_idx += 1
for i in range(n_cu):
if i > 0 and not i % args.cu_per_sqc:
print("incrementing idx on ", i)
gpu_port_idx += 1
system.cpu[shader_idx].CUs[i].sqc_port = \
system.ruby._cpu_ports[gpu_port_idx].in_ports
gpu_port_idx = gpu_port_idx + 1
for i in range(n_cu):
if i > 0 and not i % args.cu_per_scalar_cache:
print("incrementing idx on ", i)
gpu_port_idx += 1
system.cpu[shader_idx].CUs[i].scalar_port = \
system.ruby._cpu_ports[gpu_port_idx].in_ports
gpu_port_idx = gpu_port_idx + 1
# attach CP ports to Ruby
for i in range(args.num_cp):
system.cpu[cp_idx].createInterruptController()
system.cpu[cp_idx].dcache_port = \
system.ruby._cpu_ports[gpu_port_idx + i * 2].in_ports
system.cpu[cp_idx].icache_port = \
system.ruby._cpu_ports[gpu_port_idx + i * 2 + 1].in_ports
system.cpu[cp_idx].interrupts[0].pio = system.piobus.mem_side_ports
system.cpu[cp_idx].interrupts[0].int_requestor = \
system.piobus.cpu_side_ports
system.cpu[cp_idx].interrupts[0].int_responder = \
system.piobus.mem_side_ports
cp_idx = cp_idx + 1
################# Connect the CPU and GPU via GPU Dispatcher ##################
# CPU rings the GPU doorbell to notify a pending task
# using this interface.
# And GPU uses this interface to notify the CPU of task completion
# The communcation happens through emulated driver.
# Note this implicit setting of the cpu_pointer, shader_pointer and tlb array
# parameters must be after the explicit setting of the System cpu list
if fast_forward:
shader.cpu_pointer = future_cpu_list[0]
else:
shader.cpu_pointer = host_cpu
########################## Start simulation ########################
redirect_paths = [RedirectPath(app_path = "/proc",
host_paths =
["%s/fs/proc" % m5.options.outdir]),
RedirectPath(app_path = "/sys",
host_paths =
["%s/fs/sys" % m5.options.outdir]),
RedirectPath(app_path = "/tmp",
host_paths =
["%s/fs/tmp" % m5.options.outdir])]
system.redirect_paths = redirect_paths
root = Root(system=system, full_system=False)
# Create the /sys/devices filesystem for the simulator so that the HSA Runtime
# knows what type of GPU hardware we are simulating
if args.dgpu:
assert (args.gfx_version in ['gfx803', 'gfx900']),\
"Incorrect gfx version for dGPU"
if args.gfx_version == 'gfx803':
hsaTopology.createFijiTopology(args)
elif args.gfx_version == 'gfx900':
hsaTopology.createVegaTopology(args)
else:
assert (args.gfx_version in ['gfx801', 'gfx902']),\
"Incorrect gfx version for APU"
hsaTopology.createCarrizoTopology(args)
m5.ticks.setGlobalFrequency('1THz')
if args.abs_max_tick:
maxtick = args.abs_max_tick
else:
maxtick = m5.MaxTick
# Benchmarks support work item annotations
Simulation.setWorkCountOptions(system, args)
# Checkpointing is not supported by APU model
if (args.checkpoint_dir != None or
args.checkpoint_restore != None):
fatal("Checkpointing not supported by apu model")
checkpoint_dir = None
m5.instantiate(checkpoint_dir)
# Map workload to this address space
host_cpu.workload[0].map(0x10000000, 0x200000000, 4096)
if args.fast_forward:
print("Switch at instruction count: %d" % cpu_list[0].max_insts_any_thread)
exit_event = m5.simulate(maxtick)
if args.fast_forward:
if exit_event.getCause() == "a thread reached the max instruction count":
m5.switchCpus(system, switch_cpu_list)
print("Switched CPUS @ tick %s" % (m5.curTick()))
m5.stats.reset()
exit_event = m5.simulate(maxtick - m5.curTick())
elif args.fast_forward_pseudo_op:
while exit_event.getCause() == "switchcpu":
# If we are switching *to* kvm, then the current stats are meaningful
# Note that we don't do any warmup by default
if type(switch_cpu_list[0][0]) == FutureCpuClass:
print("Dumping stats...")
m5.stats.dump()
m5.switchCpus(system, switch_cpu_list)
print("Switched CPUS @ tick %s" % (m5.curTick()))
m5.stats.reset()
# This lets us switch back and forth without keeping a counter
switch_cpu_list = [(x[1], x[0]) for x in switch_cpu_list]
exit_event = m5.simulate(maxtick - m5.curTick())
print("Ticks:", m5.curTick())
print('Exiting because ', exit_event.getCause())
sys.exit(exit_event.getCode())