blob: 843b9b9f8c235cc51e9d1901e4d1c1fc944b1cd6 [file] [log] [blame]
/*
* Copyright (c) 2017 Jason Lowe-Power
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met: redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer;
* redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution;
* neither the name of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/**
* This file contains a simple example MSI protocol.
*
* The protocol in this file is based off of the MSI protocol found in
* A Primer on Memory Consistency and Cache Coherence
* Daniel J. Sorin, Mark D. Hill, and David A. Wood
* Synthesis Lectures on Computer Architecture 2011 6:3, 141-149
*
* Table 8.1 contains the transitions and actions found in this file and
* section 8.2.4 explains the protocol in detail.
*
* See Learning gem5 Part 3: Ruby for more details.
*/
/// Declare a machine with type L1Cache.
machine(MachineType:L1Cache, "MSI cache")
: Sequencer *sequencer; // Incoming request from CPU come from this
CacheMemory *cacheMemory; // This stores the data and cache states
bool send_evictions; // Needed to support O3 CPU and mwait
// Other declarations
// Message buffers are required to send and receive data from the Ruby
// network. The from/to and request/response can be confusing!
// Virtual networks are needed to prevent deadlock (e.g., it is bad if a
// response gets stuck behind a stalled request). In this protocol, we are
// using three virtual networks. The highest priority is responses,
// followed by forwarded requests, then requests have the lowest priority.
// Requests *to* the directory
MessageBuffer * requestToDir, network="To", virtual_network="0",
vnet_type="request";
// Responses *to* the directory or other caches
MessageBuffer * responseToDirOrSibling, network="To", virtual_network="2",
vnet_type="response";
// Requests *from* the directory for fwds, invs, and put acks.
MessageBuffer * forwardFromDir, network="From", virtual_network="1",
vnet_type="forward";
// Responses *from* directory and other caches for this cache's reqs.
MessageBuffer * responseFromDirOrSibling, network="From",
virtual_network="2", vnet_type="response";
// This is all of the incoming requests from the core via the sequencer
MessageBuffer * mandatoryQueue;
{
// Declare the states that this cache will use. These are both stable
// states (no underscore) and transient states (with underscore). Letters
// after the underscores are superscript in Sorin et al.
// Underscores and "desc" are used when generating HTML tables.
// Access permissions are used for functional accesses. For reads, the
// functional access reads *all* of the blocks with a matching address that
// have read-only or read-write permission. For functional writes, all
// blocks are updated with new data if they have busy, read-only, or
// read-write permission.
state_declaration(State, desc="Cache states") {
I, AccessPermission:Invalid,
desc="Not present/Invalid";
// States moving out of I
IS_D, AccessPermission:Invalid,
desc="Invalid, moving to S, waiting for data";
IM_AD, AccessPermission:Invalid,
desc="Invalid, moving to M, waiting for acks and data";
IM_A, AccessPermission:Busy,
desc="Invalid, moving to M, waiting for acks";
S, AccessPermission:Read_Only,
desc="Shared. Read-only, other caches may have the block";
// States moving out of S
SM_AD, AccessPermission:Read_Only,
desc="Shared, moving to M, waiting for acks and 'data'";
SM_A, AccessPermission:Read_Only,
desc="Shared, moving to M, waiting for acks";
M, AccessPermission:Read_Write,
desc="Modified. Read & write permissions. Owner of block";
// States moving to Invalid
MI_A, AccessPermission:Busy,
desc="Was modified, moving to I, waiting for put ack";
SI_A, AccessPermission:Busy,
desc="Was shared, moving to I, waiting for put ack";
II_A, AccessPermission:Invalid,
desc="Sent valid data before receiving put ack. ";
//"Waiting for put ack.";
}
// Events that can be triggered on incoming messages. These are the events
// that will trigger transitions
enumeration(Event, desc="Cache events") {
// From the processor/sequencer/mandatory queue
Load, desc="Load from processor";
Store, desc="Store from processor";
// Internal event (only triggered from processor requests)
Replacement, desc="Triggered when block is chosen as victim";
// Forwarded reqeust from other cache via dir on the forward network
FwdGetS, desc="Directory sent us a request to satisfy GetS. ";
//"We must have the block in M to respond to this.";
FwdGetM, desc="Directory sent us a request to satisfy GetM. ";
//"We must have the block in M to respond to this.";
Inv, desc="Invalidate from the directory.";
PutAck, desc="Response from directory after we issue a put. ";
//"This must be on the fwd network to avoid";
//"deadlock.";
// Responses from directory
DataDirNoAcks, desc="Data from directory (acks = 0)";
DataDirAcks, desc="Data from directory (acks > 0)";
// Responses from other caches
DataOwner, desc="Data from owner";
InvAck, desc="Invalidation ack from other cache after Inv";
// Special internally triggered event to simplify implementation
LastInvAck, desc="Triggered after the last ack is received";
}
// A structure for the cache entry. This stores the cache data and state
// as defined above. You can put any other information here you like.
// The AbstractCacheEntry is defined in
// src/mem/ruby/slic_interface/AbstractCacheEntry.hh
// If you want to use any of the functions in the abstract entry declare
// them here.
structure(Entry, desc="Cache entry", interface="AbstractCacheEntry") {
State CacheState, desc="cache state";
DataBlock DataBlk, desc="Data in the block";
}
// TBE is the "transaction buffer entry". This stores information needed
// during transient states. This is *like* an MSHR. It functions as an MSHR
// in this protocol, but the entry is also allocated for other uses.
structure(TBE, desc="Entry for transient requests") {
State TBEState, desc="State of block";
DataBlock DataBlk, desc="Data for the block. Needed for MI_A";
int AcksOutstanding, default=0, desc="Number of acks left to receive.";
}
// Table of TBE entries. This is defined externally in
// src/mem/ruby/structures/TBETable.hh. It is templatized on the TBE
// structure defined above.
structure(TBETable, external="yes") {
TBE lookup(Addr);
void allocate(Addr);
void deallocate(Addr);
bool isPresent(Addr);
}
/*************************************************************************/
// Some declarations of member functions and member variables.
// The TBE table for this machine. It is templatized under the covers.
// NOTE: SLICC mangles names with the machine type. Thus, the TBE declared
// above will be L1Cache_TBE in C++.
// We also have to pass through a parameter to the machine to the TBETable.
TBETable TBEs, template="<L1Cache_TBE>", constructor="m_number_of_TBEs";
// Declare all of the functions of the AbstractController that we may use
// in this file.
// Functions from clocked object
Tick clockEdge();
// Functions we must use to set things up for the transitions to execute
// correctly.
// These next set/unset functions are used to populate the implicit
// variables used in actions. This is required when a transition has
// multiple actions.
void set_cache_entry(AbstractCacheEntry a);
void unset_cache_entry();
void set_tbe(TBE b);
void unset_tbe();
// Given an address and machine type this queries the network to check
// where it should be sent. In a real implementation, this might be fixed
// at design time, but this function gives us flexibility at runtime.
// For example, if you have multiple memory channels, this function will
// tell you which addresses to send to which memory controller.
MachineID mapAddressToMachine(Addr addr, MachineType mtype);
// Convience function to look up the cache entry.
// Needs a pointer so it will be a reference and can be updated in actions
Entry getCacheEntry(Addr address), return_by_pointer="yes" {
return static_cast(Entry, "pointer", cacheMemory.lookup(address));
}
/*************************************************************************/
// Functions that we need to define/override to use our specific structures
// in this implementation.
// Required function for getting the current state of the block.
// This is called from the transition to know which transition to execute
State getState(TBE tbe, Entry cache_entry, Addr addr) {
// The TBE state will override the state in cache memory, if valid
if (is_valid(tbe)) { return tbe.TBEState; }
// Next, if the cache entry is valid, it holds the state
else if (is_valid(cache_entry)) { return cache_entry.CacheState; }
// If the block isn't present, then it's state must be I.
else { return State:I; }
}
// Required function for setting the current state of the block.
// This is called from the transition to set the ending state.
// Needs to set both the TBE and the cache entry state.
// This is also called when transitioning to I so it's possible the TBE and/
// or the cache_entry is invalid.
void setState(TBE tbe, Entry cache_entry, Addr addr, State state) {
if (is_valid(tbe)) { tbe.TBEState := state; }
if (is_valid(cache_entry)) { cache_entry.CacheState := state; }
}
// Required function to override. Used for functional access to know where
// the valid data is. NOTE: L1Cache_State_to_permission is automatically
// created based on the access permissions in the state_declaration.
// This is mangled by both the MachineType and the name of the state
// declaration ("State" in this case)
AccessPermission getAccessPermission(Addr addr) {
TBE tbe := TBEs[addr];
if(is_valid(tbe)) {
return L1Cache_State_to_permission(tbe.TBEState);
}
Entry cache_entry := getCacheEntry(addr);
if(is_valid(cache_entry)) {
return L1Cache_State_to_permission(cache_entry.CacheState);
}
return AccessPermission:NotPresent;
}
// Required function to override. Like above function, but sets thte state.
void setAccessPermission(Entry cache_entry, Addr addr, State state) {
if (is_valid(cache_entry)) {
cache_entry.changePermission(L1Cache_State_to_permission(state));
}
}
// Required function to override for functionally reading/writing data.
// NOTE: testAndRead/Write defined in src/mem/ruby/slicc_interface/Util.hh
void functionalRead(Addr addr, Packet *pkt) {
TBE tbe := TBEs[addr];
if(is_valid(tbe)) {
testAndRead(addr, tbe.DataBlk, pkt);
} else {
testAndRead(addr, getCacheEntry(addr).DataBlk, pkt);
}
}
int functionalWrite(Addr addr, Packet *pkt) {
TBE tbe := TBEs[addr];
if(is_valid(tbe)) {
if (testAndWrite(addr, tbe.DataBlk, pkt)) {
return 1;
} else {
return 0;
}
} else {
if (testAndWrite(addr, getCacheEntry(addr).DataBlk, pkt)) {
return 1;
} else {
return 0;
}
}
}
/*************************************************************************/
// Input/output network definitions
// Output ports. This defines the message types that will flow ocross the
// output buffers as defined above. These must be "to" networks.
// "request_out" is the name we'll use later to send requests.
// "RequestMsg" is the message type we will send (see MSI-msg.sm)
// "requestToDir" is the name of the MessageBuffer declared above that
// we are sending these requests out of.
out_port(request_out, RequestMsg, requestToDir);
out_port(response_out, ResponseMsg, responseToDirOrSibling);
// Input ports. The order here is/(can be) important. The code in each
// in_port is executed in the order specified in this file (or by the rank
// parameter). Thus, we must sort these based on the network priority.
// In this cache, the order is responses from other caches, forwards, then
// requests from the CPU.
// Like the out_port above
// "response_in" is the name we'll use later when we refer to this port
// "ResponseMsg" is the type of message we expect on this port
// "responseFromDirOrSibling" is the name of the buffer this in_port is
// connected to for responses from other caches and the directory.
in_port(response_in, ResponseMsg, responseFromDirOrSibling) {
// NOTE: You have to check to make sure the message buffer has a valid
// message at the head. The code in in_port is executed either way.
if (response_in.isReady(clockEdge())) {
// Peek is a special function. Any code inside a peek statement has
// a special variable declared and populated: in_msg. This contains
// the message (of type RequestMsg in this case) at the head.
// "forward_in" is the port we want to peek into
// "RequestMsg" is the type of message we expect.
peek(response_in, ResponseMsg) {
// Grab the entry and tbe if they exist.
Entry cache_entry := getCacheEntry(in_msg.addr);
TBE tbe := TBEs[in_msg.addr];
// The TBE better exist since this is a response and we need to
// be able to check the remaining acks.
assert(is_valid(tbe));
// If it's from the directory...
if (machineIDToMachineType(in_msg.Sender) ==
MachineType:Directory) {
if (in_msg.Type != CoherenceResponseType:Data) {
error("Directory should only reply with data");
}
// Take the in_msg acks and add (sub) the Acks we've seen.
// The InvAck will decrement the acks we're waiting for in
// tbe.AcksOutstanding to below 0 if we haven't gotten the
// dir resp yet. So, if this is 0 we don't need to wait
assert(in_msg.Acks + tbe.AcksOutstanding >= 0);
if (in_msg.Acks + tbe.AcksOutstanding == 0) {
trigger(Event:DataDirNoAcks, in_msg.addr, cache_entry,
tbe);
} else {
// If it's not 0, then we need to wait for more acks
// and we'll trigger LastInvAck later.
trigger(Event:DataDirAcks, in_msg.addr, cache_entry,
tbe);
}
} else {
// This is from another cache.
if (in_msg.Type == CoherenceResponseType:Data) {
trigger(Event:DataOwner, in_msg.addr, cache_entry,
tbe);
} else if (in_msg.Type == CoherenceResponseType:InvAck) {
DPRINTF(RubySlicc, "Got inv ack. %d left\n",
tbe.AcksOutstanding);
if (tbe.AcksOutstanding == 1) {
// If there is exactly one ack remaining then we
// know it is the last ack.
trigger(Event:LastInvAck, in_msg.addr, cache_entry,
tbe);
} else {
trigger(Event:InvAck, in_msg.addr, cache_entry,
tbe);
}
} else {
error("Unexpected response from other cache");
}
}
}
}
}
// Forward requests for other caches.
in_port(forward_in, RequestMsg, forwardFromDir) {
if (forward_in.isReady(clockEdge())) {
peek(forward_in, RequestMsg) {
// Grab the entry and tbe if they exist.
Entry cache_entry := getCacheEntry(in_msg.addr);
TBE tbe := TBEs[in_msg.addr];
if (in_msg.Type == CoherenceRequestType:GetS) {
// This is a special function that will trigger a
// transition (as defined below). It *must* have these
// parameters.
trigger(Event:FwdGetS, in_msg.addr, cache_entry, tbe);
} else if (in_msg.Type == CoherenceRequestType:GetM) {
trigger(Event:FwdGetM, in_msg.addr, cache_entry, tbe);
} else if (in_msg.Type == CoherenceRequestType:Inv) {
trigger(Event:Inv, in_msg.addr, cache_entry, tbe);
} else if (in_msg.Type == CoherenceRequestType:PutAck) {
trigger(Event:PutAck, in_msg.addr, cache_entry, tbe);
} else {
error("Unexpected forward message!");
}
}
}
}
// The "mandatory queue" is the port/queue from the CPU or other processor.
// This is *always* a RubyRequest
in_port(mandatory_in, RubyRequest, mandatoryQueue) {
if (mandatory_in.isReady(clockEdge())) {
// Block all requests if there is already an outstanding request
// that has the same line address. This is unblocked when we
// finally respond to the request.
peek(mandatory_in, RubyRequest, block_on="LineAddress") {
// NOTE: Using LineAddress here to promote smaller requests to
// full cache block requests.
Entry cache_entry := getCacheEntry(in_msg.LineAddress);
TBE tbe := TBEs[in_msg.LineAddress];
// If there isn't a matching entry and no room in the cache,
// then we need to find a victim.
if (is_invalid(cache_entry) &&
cacheMemory.cacheAvail(in_msg.LineAddress) == false ) {
// make room for the block
// The "cacheProbe" function looks at the cache set for
// the address and queries the replacement protocol for
// the address to replace. It returns the address to repl.
Addr addr := cacheMemory.cacheProbe(in_msg.LineAddress);
Entry victim_entry := getCacheEntry(addr);
TBE victim_tbe := TBEs[addr];
trigger(Event:Replacement, addr, victim_entry, victim_tbe);
} else {
if (in_msg.Type == RubyRequestType:LD ||
in_msg.Type == RubyRequestType:IFETCH) {
trigger(Event:Load, in_msg.LineAddress, cache_entry,
tbe);
} else if (in_msg.Type == RubyRequestType:ST) {
trigger(Event:Store, in_msg.LineAddress, cache_entry,
tbe);
} else {
error("Unexpected type from processor");
}
}
}
}
}
/*************************************************************************/
// Below are all of the actions that might be taken on a transition.
// Each actions has a name, a shorthand, and a description.
// The shorthand is used when generating the HTML tables for the protocol.
// "\" in the shorthand cause that letter to be bold. Underscores insert a
// space, ^ makes the rest of the letters superscript.
// The description is also shown in the HTML table when clicked
// The first set of actions are things we will do to interact with the
// rest of the system. Things like sending requests/responses.
// Action blocks define a number of implicit variables that are useful.
// These variables come straight from the trigger() call in the in_port
// blocks.
// address: The address passed in the trigger (usually the in_msg.addr,
// though it can be different. E.g., on a replacement it is the
// victim address).
// cache_entry: The cache entry passed in the trigger call
// tbe: The TBE passed in the trigger call
action(sendGetS, 'gS', desc="Send GetS to the directory") {
// The syntax for enqueue is a lot like peek. Instead of populating
// in_msg, enqueue has an out_msg reference. Whatever you set on out_msg
// is sent through the out port specified. "request_out" is the port
// we're sending the message out of "RequestMsg" is the type of message
// we're sending "1" is the latency (in cycles) the port waits before
// sending the message.
enqueue(request_out, RequestMsg, 1) {
out_msg.addr := address;
// This type is defined in MSI-msg.sm for this protocol.
out_msg.Type := CoherenceRequestType:GetS;
// The destination may change depending on the address striping
// across different directories, so query the network.
out_msg.Destination.add(mapAddressToMachine(address,
MachineType:Directory));
// See mem/ruby/protocol/RubySlicc_Exports.sm for possible sizes.
out_msg.MessageSize := MessageSizeType:Control;
// Set that the reqeustor is this machine so we get the response.
out_msg.Requestor := machineID;
}
}
action(sendGetM, "gM", desc="Send GetM to the directory") {
enqueue(request_out, RequestMsg, 1) {
out_msg.addr := address;
out_msg.Type := CoherenceRequestType:GetM;
out_msg.Destination.add(mapAddressToMachine(address,
MachineType:Directory));
out_msg.MessageSize := MessageSizeType:Control;
out_msg.Requestor := machineID;
}
}
// NOTE: Clean evict. Required to keep the directory state up-to-date
action(sendPutS, "pS", desc="Send PutS to the directory") {
enqueue(request_out, RequestMsg, 1) {
out_msg.addr := address;
out_msg.Type := CoherenceRequestType:PutS;
out_msg.Destination.add(mapAddressToMachine(address,
MachineType:Directory));
out_msg.MessageSize := MessageSizeType:Control;
out_msg.Requestor := machineID;
}
}
action(sendPutM, "pM", desc="Send putM+data to the directory") {
enqueue(request_out, RequestMsg, 1) {
out_msg.addr := address;
out_msg.Type := CoherenceRequestType:PutM;
out_msg.Destination.add(mapAddressToMachine(address,
MachineType:Directory));
out_msg.DataBlk := cache_entry.DataBlk;
out_msg.MessageSize := MessageSizeType:Data;
out_msg.Requestor := machineID;
}
}
action(sendCacheDataToReq, "cdR", desc="Send cache data to requestor") {
// We have to peek into the request to see who to send to.
// If we are in both the peek and the enqueue block then we have access
// to both in_msg and out_msg.
assert(is_valid(cache_entry));
peek(forward_in, RequestMsg) {
enqueue(response_out, ResponseMsg, 1) {
out_msg.addr := address;
out_msg.Type := CoherenceResponseType:Data;
out_msg.Destination.add(in_msg.Requestor);
out_msg.DataBlk := cache_entry.DataBlk;
out_msg.MessageSize := MessageSizeType:Data;
out_msg.Sender := machineID;
}
}
}
action(sendCacheDataToDir, "cdD", desc="Send the cache data to the dir") {
enqueue(response_out, ResponseMsg, 1) {
out_msg.addr := address;
out_msg.Type := CoherenceResponseType:Data;
out_msg.Destination.add(mapAddressToMachine(address,
MachineType:Directory));
out_msg.DataBlk := cache_entry.DataBlk;
out_msg.MessageSize := MessageSizeType:Data;
out_msg.Sender := machineID;
}
}
action(sendInvAcktoReq, "iaR", desc="Send inv-ack to requestor") {
peek(forward_in, RequestMsg) {
enqueue(response_out, ResponseMsg, 1) {
out_msg.addr := address;
out_msg.Type := CoherenceResponseType:InvAck;
out_msg.Destination.add(in_msg.Requestor);
out_msg.DataBlk := cache_entry.DataBlk;
out_msg.MessageSize := MessageSizeType:Control;
out_msg.Sender := machineID;
}
}
}
action(decrAcks, "da", desc="Decrement the number of acks") {
assert(is_valid(tbe));
tbe.AcksOutstanding := tbe.AcksOutstanding - 1;
// This annotates the protocol trace
APPEND_TRANSITION_COMMENT("Acks: ");
APPEND_TRANSITION_COMMENT(tbe.AcksOutstanding);
}
action(storeAcks, "sa", desc="Store the needed acks to the TBE") {
assert(is_valid(tbe));
peek(response_in, ResponseMsg) {
tbe.AcksOutstanding := in_msg.Acks + tbe.AcksOutstanding;
}
assert(tbe.AcksOutstanding > 0);
}
// Responses to CPU requests (e.g., hits and store acks)
action(loadHit, "Lh", desc="Load hit") {
assert(is_valid(cache_entry));
// Set this entry as the most recently used for the replacement policy
cacheMemory.setMRU(cache_entry);
// Send the data back to the sequencer/CPU. NOTE: False means it was
// not an "external hit", but hit in this local cache.
sequencer.readCallback(address, cache_entry.DataBlk, false);
}
action(externalLoadHit, "xLh", desc="External load hit (was a miss)") {
assert(is_valid(cache_entry));
peek(response_in, ResponseMsg) {
cacheMemory.setMRU(cache_entry);
// Forward the type of machine that responded to this request
// E.g., another cache or the directory. This is used for tracking
// statistics.
sequencer.readCallback(address, cache_entry.DataBlk, true,
machineIDToMachineType(in_msg.Sender));
}
}
action(storeHit, "Sh", desc="Store hit") {
assert(is_valid(cache_entry));
cacheMemory.setMRU(cache_entry);
// The same as the read callback above.
sequencer.writeCallback(address, cache_entry.DataBlk, false);
}
action(externalStoreHit, "xSh", desc="External store hit (was a miss)") {
assert(is_valid(cache_entry));
peek(response_in, ResponseMsg) {
cacheMemory.setMRU(cache_entry);
sequencer.writeCallback(address, cache_entry.DataBlk, true,
// Note: this could be the last ack.
machineIDToMachineType(in_msg.Sender));
}
}
action(forwardEviction, "e", desc="sends eviction notification to CPU") {
if (send_evictions) {
sequencer.evictionCallback(address);
}
}
// Cache management actions
action(allocateCacheBlock, "a", desc="Allocate a cache block") {
assert(is_invalid(cache_entry));
assert(cacheMemory.cacheAvail(address));
// Create a new entry and update cache_entry to the new entry
set_cache_entry(cacheMemory.allocate(address, new Entry));
}
action(deallocateCacheBlock, "d", desc="Deallocate a cache block") {
assert(is_valid(cache_entry));
cacheMemory.deallocate(address);
// clear the cache_entry variable (now it's invalid)
unset_cache_entry();
}
action(writeDataToCache, "wd", desc="Write data to the cache") {
peek(response_in, ResponseMsg) {
assert(is_valid(cache_entry));
cache_entry.DataBlk := in_msg.DataBlk;
}
}
action(allocateTBE, "aT", desc="Allocate TBE") {
assert(is_invalid(tbe));
TBEs.allocate(address);
// this updates the tbe variable for other actions
set_tbe(TBEs[address]);
}
action(deallocateTBE, "dT", desc="Deallocate TBE") {
assert(is_valid(tbe));
TBEs.deallocate(address);
// this makes the tbe varible invalid
unset_tbe();
}
// Queue management actions
action(popMandatoryQueue, "pQ", desc="Pop the mandatory queue") {
mandatory_in.dequeue(clockEdge());
}
action(popResponseQueue, "pR", desc="Pop the response queue") {
response_in.dequeue(clockEdge());
}
action(popForwardQueue, "pF", desc="Pop the forward queue") {
forward_in.dequeue(clockEdge());
}
// Stalling actions
action(stall, "z", desc="Stall the incoming request") {
// Do nothing. However, the transition must have some action to be
// valid which is why this is needed.
// NOTE: There are other more complicated but higher performing stalls
// in Ruby like recycle() or stall_and_wait.
// z_stall stalls everything in the queue behind this request.
}
/*************************************************************************/
// These are the transition definition. These are simply each cell in the
// table from Sorin et al. These are mostly in upper-left to bottom-right
// order
// Each transtiion has (up to) 3 parameters, the current state, the
// triggering event and the final state. Thus, the below transition reads
// "Move from state I on a Load event to state IS_D". Below are other
// examples of transition statements.
// Within the transition statement is a set of action to take during the
// transition. These actions are executed atomically (i.e., all or nothing)
transition(I, Load, IS_D) {
// Make sure there is room in the cache to put the block whenever the
// miss returns. Otherwise we could deadlock.
allocateCacheBlock;
// We may need to track acks for this block and only the TBE holds an
// ack count. Thus, we need to allocate both a TBE and cache block.
allocateTBE;
// Actually send the request to the directory
sendGetS;
// Since we have handled this request on the mandatory queue, we can pop
popMandatoryQueue;
}
transition(I, Store, IM_AD) {
allocateCacheBlock;
allocateTBE;
sendGetM;
popMandatoryQueue;
}
// You can use {} to specify multiple states or events for which the
// transition applies. For instance, below. If we are in IS_D, then on any
// of the following Events (Load, Store, Replacement, Inv) we should stall
// When there is no third parameter to transition, it means that we want
// to stay in the initial state.
transition(IS_D, {Load, Store, Replacement, Inv}) {
stall;
}
// Similarly, on either DataDirNoAcks or DataOwner we should go to S
transition(IS_D, {DataDirNoAcks, DataOwner}, S) {
writeDataToCache;
deallocateTBE;
externalLoadHit;
popResponseQueue;
}
transition({IM_AD, IM_A}, {Load, Store, Replacement, FwdGetS, FwdGetM}) {
stall;
}
transition({IM_AD, SM_AD}, {DataDirNoAcks, DataOwner}, M) {
writeDataToCache;
deallocateTBE;
externalStoreHit;
popResponseQueue;
}
transition(IM_AD, DataDirAcks, IM_A) {
writeDataToCache;
storeAcks;
popResponseQueue;
}
transition({IM_AD, IM_A, SM_AD, SM_A}, InvAck) {
decrAcks;
popResponseQueue;
}
transition({IM_A, SM_A}, LastInvAck, M) {
deallocateTBE;
externalStoreHit;
popResponseQueue;
}
transition({S, SM_AD, SM_A, M}, Load) {
loadHit;
popMandatoryQueue;
}
transition(S, Store, SM_AD) {
allocateTBE;
sendGetM;
popMandatoryQueue;
}
transition(S, Replacement, SI_A) {
sendPutS;
}
transition(S, Inv, I) {
sendInvAcktoReq;
forwardEviction;
deallocateCacheBlock;
popForwardQueue;
}
transition({SM_AD, SM_A}, {Store, Replacement, FwdGetS, FwdGetM}) {
stall;
}
transition(SM_AD, Inv, IM_AD) {
sendInvAcktoReq;
popForwardQueue;
}
transition(SM_AD, DataDirAcks, SM_A) {
writeDataToCache;
storeAcks;
popResponseQueue;
}
transition(M, Store) {
storeHit;
forwardEviction;
popMandatoryQueue;
}
transition(M, Replacement, MI_A) {
sendPutM;
}
transition(M, FwdGetS, S) {
sendCacheDataToReq;
sendCacheDataToDir;
popForwardQueue;
}
transition(M, FwdGetM, I) {
sendCacheDataToReq;
deallocateCacheBlock;
popForwardQueue;
}
transition({MI_A, SI_A, II_A}, {Load, Store, Replacement}) {
stall;
}
transition(MI_A, FwdGetS, SI_A) {
sendCacheDataToReq;
sendCacheDataToDir;
popForwardQueue;
}
transition(MI_A, FwdGetM, II_A) {
sendCacheDataToReq;
popForwardQueue;
}
transition({MI_A, SI_A, II_A}, PutAck, I) {
deallocateCacheBlock;
popForwardQueue;
}
transition(SI_A, Inv, II_A) {
sendInvAcktoReq;
popForwardQueue;
}
}