blob: 2969b349d917ee802ed44c604fe91184d87f2f07 [file] [log] [blame]
#! /bin/bash
#
# Copyright (c) 2015 ARM Limited
# All rights reserved
#
# The license below extends only to copyright in the software and shall
# not be construed as granting a license to any other intellectual
# property including but not limited to intellectual property relating
# to a hardware implementation of the functionality of the software
# licensed hereunder. You may use the software subject to the license
# terms below provided that you ensure that this notice is replicated
# unmodified and in its entirety in all distributions of the software,
# modified or unmodified, in source code or in binary form.
#
# Copyright (c) 2015 University of Illinois Urbana Champaign
# All rights reserved
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met: redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer;
# redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution;
# neither the name of the copyright holders nor the names of its
# contributors may be used to endorse or promote products derived from
# this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
# This is a wrapper script to run a dist gem5 simulations.
# See the usage_func() below for hints on how to use it. Also,
# there are some examples in the util/dist directory (e.g.
# see util/dist/test-2nodes-AArch64.sh)
#
#
# Allocated hosts/cores are assumed to be listed in the LSB_MCPU_HOSTS
# environment variable (which is what LSF does by default).
# E.g. LSB_MCPU_HOSTS=\"hname1 2 hname2 4\" means we have altogether 6 slots
# allocated to launch the gem5 processes, 2 of them are on host hname1
# and 4 of them are on host hname2.
# If LSB_MCPU_HOSTS environment variable is not defined then we launch all
# processes on the localhost.
#
# Each gem5 process are passed in a unique rank ID [0..N-1] via the kernel
# boot params. The total number of gem5 processes is also passed in.
# These values can be used in the boot script to configure the MAC/IP
# addresses - among other things (see util/dist/bootscript.rcS).
#
# Each gem5 process will create an m5out.$GEM5_RANK directory for
# the usual output files. Furthermore, there will be a separate log file
# for each ssh session (we use ssh to start gem5 processes) and one for
# the server. These are called log.$GEM5_RANK and log.switch.
#
# print help
usage_func ()
{
echo "Usage:$0 [-debug] [-n nnodes] [-r rundir] [-c ckptdir] [-p port] [-sw switch] [--sw-args sw_args] [-fs fullsystem] [--fs-args fs_args] [--cf-args conf_args] [--m5-args m5_args] -x gem5_exe "
echo " -debug : debug mode (start gem5 in gdb)"
echo " nnodes : number of gem5 processes"
echo " rundir : run simulation under this path. If not specified, current dir will be used"
echo " ckptdir : dump/restore checkpoints to/from this path. If not specified, current dir will be used"
echo " fullsystem: fullsystem config file"
echo " fs_args : fullsystem config specific argument list: arg1 arg2 ..."
echo " port : switch listen port"
echo " switch : switch config file"
echo " sw_args : switch config specific argument list: arg1 arg2 ..."
echo " conf_args : common (for both fullsystem and switch) config argument list: arg1 arg2 ..."
echo " gem5_exe : gem5 executable (full path required)"
echo " m5_args : common m5 argument list (e.g. debug flags): arg1 arg2 ..."
echo "Note: if no LSF slots allocation is found all proceses are launched on the localhost."
}
# Process (optional) command line options
FS_ARGS=" "
SW_ARGS=" "
CF_ARGS=" "
M5_ARGS=" "
while (($# > 0))
do
case "x$1" in
x-debug)
GEM5_DEBUG="-debug"
shift 1
;;
x-n|x-nodes)
NNODES=$2
shift 2
;;
x-r|x-rundir)
RUN_DIR=$2
shift 2
;;
x-c|x-ckptdir)
CKPT_DIR=$2
shift 2
;;
x-p|x-port)
SW_PORT=$2
shift 2
;;
x-s|x-switch)
SW_CONFIG=$2
shift 2
;;
x--sw-args)
CUR_ARGS="SW_ARGS"
shift 1
;;
x-f|x-fullsystem)
FS_CONFIG=$2
shift 2
;;
x--fs-args)
CUR_ARGS="FS_ARGS"
shift 1
;;
x--cf-args)
CUR_ARGS="CF_ARGS"
shift 1
;;
x--m5-args)
CUR_ARGS="M5_ARGS"
shift 1
;;
x-x)
GEM5_EXE=$2
shift 2
;;
x-*)
[ -n "$CUR_ARGS" ] || { echo "Unexpected arg: $1"; usage_func; exit -1; }
case "x$2" in
x-*|x)
eval $CUR_ARGS=\"${!CUR_ARGS} $1\"
shift 1
;;
*)
eval $CUR_ARGS=\"${!CUR_ARGS} $1 $2\"
shift 2
;;
esac
;;
*)
echo "Unknown arg: $1"
usage_func
exit 1
;;
esac
done
# Default values to use (in case they are not defined as command line options)
DEFAULT_FS_CONFIG=$M5_PATH/configs/example/fs.py
DEFAULT_SW_CONFIG=$M5_PATH/configs/dist/sw.py
DEFAULT_SW_PORT=2200
[ -z "$FS_CONFIG" ] && FS_CONFIG=$DEFAULT_FS_CONFIG
[ -z "$SW_CONFIG" ] && SW_CONFIG=$DEFAULT_SW_CONFIG
[ -z "$SW_PORT" ] && SW_PORT=$DEFAULT_SW_PORT
[ -z "$NNODES" ] && NNODES=2
[ -z "$RUN_DIR" ] && RUN_DIR=$(pwd)
[ -z "$CKPT_DIR" ] && CKPT_DIR=$(pwd)
# Check if all the executables we need exist
[ -f "$FS_CONFIG" ] || { echo "FS config ${FS_CONFIG} not found"; exit 1; }
[ -f "$SW_CONFIG" ] || { echo "Switch config ${SW_CONFIG} not found"; exit 1; }
[ -x "$GEM5_EXE" ] || { echo "Executable ${GEM5_EXE} not found"; exit 1; }
# make sure that RUN_DIR exists
mkdir -p $RUN_DIR > /dev/null 2>&1
declare -a SSH_PIDS
declare -a HOSTS
declare -a NCORES
# Find out which cluster hosts/slots are allocated or
# use localhost if there is no LSF allocation.
# We assume that allocated slots are listed in the LSB_MCPU_HOSTS
# environment variable in the form:
# host1 nslots1 host2 nslots2 ...
# (This is what LSF does by default.)
NH=0
[ "x$LSB_MCPU_HOSTS" != "x" ] || LSB_MCPU_HOSTS="127.0.0.1 $NNODES"
host=""
for hc in $LSB_MCPU_HOSTS
do
if [ "x$host" == "x" ]
then
host=$hc
HOSTS+=($hc)
else
NCORES+=($hc)
((NH+=hc))
host=""
fi
done
((NNODES==NH)) || { echo "(E) Number of cluster slots ($NH) and gem5 instances ($N) differ"; exit -1; }
# function to clean up and abort if something goes wrong
abort_func ()
{
echo
echo "KILLED $(date)"
# Try to Kill the server first. That should trigger an exit for all connected
# gem5 processes.
[ "x$SW_PID" != "x" ] && kill $SW_PID 2>/dev/null
sleep 20
# (try to) kill gem5 processes - just in case something went wrong with the
# server triggered exit
bname=$(basename $GEM5_EXE)
killall -q -s SIGKILL $bname
for h in ${HOSTS[@]}
do
ssh $h killall -q -s SIGKILL $bname
done
sleep 5
# kill the watchdog
[ "x$WATCHDOG_PID" != "x" ] && kill $WATCHDOG_PID 2>/dev/null
exit -1
}
# We need a watchdog to trigger full clean up if a gem5 process dies
watchdog_func ()
{
while true
do
sleep 30
((NDEAD=0))
for p in ${SSH_PIDS[*]}
do
kill -0 $p 2>/dev/null || ((NDEAD+=1))
done
kill -0 $SW_PID || ((NDEAD+=1))
if ((NDEAD>0))
then
# we may be in the middle of an orderly termination,
# give it some time to complete before reporting abort
sleep 60
echo -n "(I) (some) gem5 process(es) exited"
abort_func
fi
done
}
# This function launches the gem5 processes. The only purpose is to enable
# launching gem5 processes under gdb control for debugging
start_func ()
{
local N=$1
local HOST=$2
local ENV_ARGS=$3
shift 3
if [ "x$GEM5_DEBUG" != "x" ]
then
echo "DEBUG starting terminal..."
MY_ARGS="$@"
xterm -e "gdb --args $MY_ARGS" &
else
ssh $HOST $ENV_ARGS "$@" &> $RUN_DIR/log.$N &
fi
}
# block till the gem5 process starts
connected ()
{
FILE=$1
STRING=$2
echo -n "waiting for $3 to start "
while : ;
do
kill -0 $4 || { echo "Failed to start $3"; exit -1; }
[[ -f "$FILE" ]] && \
grep -q "$STRING" "$FILE" && \
echo -e "\nnode #$3 started" && \
break
sleep 2
echo -n "."
done
}
# Trigger full clean up in case we are being killed by external signal
trap 'abort_func' INT TERM
# env args to be passed explicitly to gem5 processes started via ssh
ENV_ARGS="LD_LIBRARY_PATH=$LD_LIBRARY_PATH M5_PATH=$M5_PATH"
#cleanup log files before starting gem5 processes
rm $RUN_DIR/log.switch > /dev/null 2>&1
# make sure that CKPT_DIR exists
mkdir -p $CKPT_DIR/m5out.switch > /dev/null 2>&1
# launch switch gem5
SW_HOST=${HOSTS[0]}
echo "launch switch gem5 process on $SW_HOST ..."
start_func "switch" $SW_HOST "$ENV_ARGS" $GEM5_EXE -d $RUN_DIR/m5out.switch \
$M5_ARGS \
$SW_CONFIG \
$SW_ARGS \
$CF_ARGS \
--checkpoint-dir=$CKPT_DIR/m5out.switch \
--is-switch \
--dist-size=$NNODES \
--dist-server-port=$SW_PORT
SW_PID=$!
# block here till switch process starts
connected $RUN_DIR/log.switch "tcp_iface listening on port" "switch" $SW_PID
LINE=$(grep -r "tcp_iface listening on port" $RUN_DIR/log.switch)
IFS=' ' read -ra ADDR <<< "$LINE"
# actual port that switch is listening on may be different
# from what we specified if the port was busy
SW_PORT=${ADDR[5]}
# Now launch all the gem5 processes with ssh.
echo "START $(date)"
n=0
for ((i=0; i < ${#HOSTS[@]}; i++))
do
h=${HOSTS[$i]}
for ((j=0; j < ${NCORES[i]}; j++))
do
#cleanup log files before starting gem5 processes
rm $RUN_DIR/log.$n > /dev/null 2>&1
# make sure that CKPT_DIR exists
mkdir -p $CKPT_DIR/m5out.$n > /dev/null 2>&1
echo "starting gem5 on $h ..."
start_func $n $h "$ENV_ARGS" $GEM5_EXE -d $RUN_DIR/m5out.$n \
$M5_ARGS \
$FS_CONFIG \
$FS_ARGS \
$CF_ARGS \
--checkpoint-dir=$CKPT_DIR/m5out.$n \
--dist \
--dist-rank=$n \
--dist-size=$NNODES \
--dist-server-name=${HOSTS[0]} \
--dist-server-port=$SW_PORT
SSH_PIDS[$n]=$!
((n+=1))
done
done
# Wait here if it is a debug session
[ "x$GEM5_DEBUG" == "x" ] || { echo "DEBUG session"; wait $SW_PID; exit -1; }
# start watchdog to trigger complete abort (after a grace period) if any
# gem5 process dies
watchdog_func &
WATCHDOG_PID=$!
# wait for exit statuses
((NFAIL=0))
for p in ${SSH_PIDS[*]}
do
wait $p || ((NFAIL+=1))
done
wait $SW_PID || ((NFAIL+=1))
# all done, let's terminate the watchdog
kill $WATCHDOG_PID 2>/dev/null
if ((NFAIL==0))
then
echo "EXIT $(date)"
else
echo "ABORT $(date)"
fi