// -*- mode:c++ -*-

// Copyright (c) 2009 The University of Edinburgh
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are
// met: redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer;
// redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the distribution;
// neither the name of the copyright holders nor the names of its
// contributors may be used to endorse or promote products derived from
// this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

////////////////////////////////////////////////////////////////////
//
// Control transfer instructions
//
// From the Power ISA Book I v2.06, page 33, the following rules should
// be obeyed by programmers:
//
// - Use branch instructions where LK == 1 only as subroutine calls.
// - Pair each subroutine call with a bclr instruction with BH == 00
//   that returns from the subroutine.
// - Do not use bclrl as a subroutine call.
//
// Therefore, I've flagged all versions that update the link register (LR)
// as calls, except bclrl (BranchLrCtrCond format) which is flagged as
// a return.


let {{

# Simple code to update link register (LR).
updateLrCode = 'LR = CIA + 4;'

}};

// Instructions that unconditionally branch relative to the current PC.
def format BranchPCRel(br_code, inst_flags = []) {{
    inst_flags += ('IsUncondControl', 'IsDirectControl')
    basic_code = br_code

    # The version that does not update LR
    (header_output, decoder_output, decode_block, exec_output) = \
        GenAluOp(name, Name, 'BranchPCRel', basic_code, inst_flags,
                 CheckLkDecode, BasicConstructor)

    # The version that does the update
    update_code = basic_code + updateLrCode
    update_flags = inst_flags + [ 'IsCall' ]
    (header_output_up, decoder_output_up, _, exec_output_up) = \
        GenAluOp(name, Name + 'UpdateLr', 'BranchPCRel', update_code,
                 update_flags, CheckLkDecode, BasicConstructor)

    # Add the outputs together
    header_output += header_output_up
    decoder_output += decoder_output_up
    exec_output += exec_output_up
}};

// Instructions that unconditionally branch to a specific address.
def format BranchNonPCRel(br_code, inst_flags = []) {{
    inst_flags += ('IsUncondControl', 'IsDirectControl')
    basic_code = br_code

    # The version that does not update LR
    (header_output, decoder_output, decode_block, exec_output) = \
        GenAluOp(name, Name, 'BranchNonPCRel', basic_code, inst_flags,
                 CheckLkDecode, BasicConstructor)

    # The version that does the update
    update_code = basic_code + updateLrCode
    update_flags = inst_flags + [ 'IsCall' ]
    (header_output_up, decoder_output_up, _, exec_output_up) = \
        GenAluOp(name, Name + 'UpdateLr', 'BranchNonPCRel', update_code,
                 update_flags, CheckLkDecode, BasicConstructor)

    # Add the outputs together
    header_output += header_output_up
    decoder_output += decoder_output_up
    exec_output += exec_output_up
}};

let {{

# Check the condition register (CR) allows the branch to be taken.
def GetCondCode(br_code):
    cond_code =  'if(condOk(CR)) {\n'
    cond_code += '    ' + br_code + '\n'
    cond_code += '} else {\n'
    cond_code += '    NIA = NIA;\n'
    cond_code += '}\n'
    return cond_code

# Check the condition register (CR) and count register (CTR) allow the
# branch to be taken. Also, in certain situations, decrement the count
# register too. This takes place in ctrOk within BranchCond classes.
def GetCtrCondCode(br_code):
    cond_code =  'uint32_t ctr = CTR;\n'
    cond_code += 'bool ctr_ok = ctrOk(ctr);\n'
    cond_code += 'bool cond_ok = condOk(CR);\n'
    cond_code += 'if(ctr_ok && cond_ok) {\n'
    cond_code += '    ' + br_code + '\n'
    cond_code += '} else {\n'
    cond_code += '    NIA = NIA;\n'
    cond_code += '}\n'
    cond_code += 'CTR = ctr;\n'
    return cond_code

}};

// Instructions that conditionally branch relative to the current PC based on
// the condition register (CR) and count register (CTR).
def format BranchPCRelCondCtr(br_code, inst_flags = []) {{
    inst_flags += ('IsCondControl', 'IsDirectControl')
    basic_code = GetCtrCondCode(br_code)

    # The version that does not update LR
    (header_output, decoder_output, decode_block, exec_output) = \
        GenAluOp(name, Name, 'BranchPCRelCond', basic_code, inst_flags,
                 CheckLkDecode, BasicConstructor)

    # The version that does the update
    update_code = basic_code + updateLrCode
    update_flags = inst_flags + [ 'IsCall' ]
    (header_output_up, decoder_output_up, _, exec_output_up) = \
        GenAluOp(name, Name + 'UpdateLr', 'BranchPCRelCond', update_code,
                 update_flags, CheckLkDecode, BasicConstructor)

    # Add the outputs together
    header_output += header_output_up
    decoder_output += decoder_output_up
    exec_output += exec_output_up
}};

// Instructions that conditionally branch to a specific address based on the
// condition register (CR) and count register (CTR).
def format BranchNonPCRelCondCtr(br_code, inst_flags = []) {{
    inst_flags += ('IsCondControl', 'IsDirectControl')
    basic_code = GetCtrCondCode(br_code)

    # The version that does not update LR
    (header_output, decoder_output, decode_block, exec_output) = \
        GenAluOp(name, Name, 'BranchNonPCRelCond', basic_code, inst_flags,
                 CheckLkDecode, BasicConstructor)

    # The version that does the update
    update_code = basic_code + updateLrCode
    update_flags = inst_flags + [ 'IsCall' ]
    (header_output_up, decoder_output_up, _, exec_output_up) = \
        GenAluOp(name, Name + 'UpdateLr', 'BranchNonPCRelCond', update_code,
                 update_flags, CheckLkDecode, BasicConstructor)

    # Add the outputs together
    header_output += header_output_up
    decoder_output += decoder_output_up
    exec_output += exec_output_up
}};

// Instructions that conditionally branch to the address in the link register
// (LR) based on the condition register (CR) and count register (CTR).
def format BranchLrCondCtr(br_code, inst_flags = []) {{
    inst_flags += ('IsCondControl', 'IsIndirectControl', 'IsReturn')
    basic_code = GetCtrCondCode(br_code)

    # The version that does not update LR
    (header_output, decoder_output, decode_block, exec_output) = \
        GenAluOp(name, Name, 'BranchRegCond', basic_code, inst_flags,
                 CheckLkDecode, BasicConstructor)

    # The version that does the update
    update_code = basic_code + updateLrCode
    (header_output_up, decoder_output_up, _, exec_output_up) = \
        GenAluOp(name, Name + 'UpdateLr', 'BranchRegCond', update_code,
                 inst_flags, CheckLkDecode, BasicConstructor)

    # Add the outputs together
    header_output += header_output_up
    decoder_output += decoder_output_up
    exec_output += exec_output_up
}};

// Instructions that conditionally branch to the address in the count register
// (CTR) based on the condition register (CR).
def format BranchCtrCond(br_code, inst_flags = []) {{
    inst_flags += ('IsCondControl', 'IsIndirectControl')
    basic_code = GetCondCode(br_code)

    # The version that does not update LR
    (header_output, decoder_output, decode_block, exec_output) = \
        GenAluOp(name, Name, 'BranchRegCond', basic_code, inst_flags,
                 CheckLkDecode, BasicConstructor)

    # The version that does the update
    update_code = basic_code + updateLrCode
    update_flags = inst_flags + [ 'IsCall' ]
    (header_output_up, decoder_output_up, _, exec_output_up) = \
        GenAluOp(name, Name + 'UpdateLr', 'BranchRegCond', update_code,
                 update_flags, CheckLkDecode, BasicConstructor)

    # Add the outputs together
    header_output += header_output_up
    decoder_output += decoder_output_up
    exec_output += exec_output_up
}};