blob: b37a93cc03dee4f7abec52764d42b9061c519da0 [file] [log] [blame]
/*
* Copyright (c) 2013 ARM Limited
* All rights reserved
*
* The license below extends only to copyright in the software and shall
* not be construed as granting a license to any other intellectual
* property including but not limited to intellectual property relating
* to a hardware implementation of the functionality of the software
* licensed hereunder. You may use the software subject to the license
* terms below provided that you ensure that this notice is replicated
* unmodified and in its entirety in all distributions of the software,
* modified or unmodified, in source code or in binary form.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met: redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer;
* redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution;
* neither the name of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
#include <cassert>
/**
* When building the debug binary, we need to undo the command-line
* definition of DEBUG not to clash with DRAMsim3 print macros that
* are included for no obvious reason.
*/
#ifdef DEBUG
#undef DEBUG
#endif
#include "mem/dramsim3_wrapper.hh"
#include <fstream>
#include "DRAMsim3/src/dramsim3.h"
#include "base/compiler.hh"
#include "base/logging.hh"
DRAMsim3Wrapper::DRAMsim3Wrapper(const std::string& config_file,
const std::string& working_dir,
std::function<void(uint64_t)> read_cb,
std::function<void(uint64_t)> write_cb) :
dramsim(dramsim3::GetMemorySystem(config_file, working_dir,
read_cb, write_cb)),
_clockPeriod(0.0), _queueSize(0), _burstSize(0)
{
// there is no way of getting DRAMsim3 to tell us what frequency
// it is assuming, so we have to extract it ourselves
_clockPeriod = dramsim->GetTCK();
if (!_clockPeriod)
fatal("DRAMsim3 wrapper failed to get clock\n");
// we also need to know what transaction queue size DRAMsim3 is
// using so we can stall when responses are blocked
_queueSize = dramsim->GetQueueSize();
if (!_queueSize)
fatal("DRAMsim3 wrapper failed to get queue size\n");
// finally, get the data bus bits and burst length so we can add a
// sanity check for the burst size
unsigned int dataBusBits = dramsim->GetBusBits();
unsigned int burstLength = dramsim->GetBurstLength();
if (!dataBusBits || !burstLength)
fatal("DRAMsim3 wrapper failed to get burst size\n");
_burstSize = dataBusBits * burstLength / 8;
}
DRAMsim3Wrapper::~DRAMsim3Wrapper()
{
delete dramsim;
}
void
DRAMsim3Wrapper::printStats()
{
dramsim->PrintStats();
}
void
DRAMsim3Wrapper::resetStats()
{
dramsim->ResetStats();
}
void
DRAMsim3Wrapper::setCallbacks(std::function<void(uint64_t)> read_complete,
std::function<void(uint64_t)> write_complete)
{
dramsim->RegisterCallbacks(read_complete, write_complete);
}
bool
DRAMsim3Wrapper::canAccept(uint64_t addr, bool is_write) const
{
return dramsim->WillAcceptTransaction(addr, is_write);
}
void
DRAMsim3Wrapper::enqueue(uint64_t addr, bool is_write)
{
M5_VAR_USED bool success = dramsim->AddTransaction(addr, is_write);
assert(success);
}
double
DRAMsim3Wrapper::clockPeriod() const
{
return _clockPeriod;
}
unsigned int
DRAMsim3Wrapper::queueSize() const
{
return _queueSize;
}
unsigned int
DRAMsim3Wrapper::burstSize() const
{
return _burstSize;
}
void
DRAMsim3Wrapper::tick()
{
dramsim->ClockTick();
}