| # -*- coding: utf-8 -*- | |
| # Copyright (c) 2015 Jason Power | |
| # All rights reserved. | |
| # | |
| # Redistribution and use in source and binary forms, with or without | |
| # modification, are permitted provided that the following conditions are | |
| # met: redistributions of source code must retain the above copyright | |
| # notice, this list of conditions and the following disclaimer; | |
| # redistributions in binary form must reproduce the above copyright | |
| # notice, this list of conditions and the following disclaimer in the | |
| # documentation and/or other materials provided with the distribution; | |
| # neither the name of the copyright holders nor the names of its | |
| # contributors may be used to endorse or promote products derived from | |
| # this software without specific prior written permission. | |
| # | |
| # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS | |
| # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT | |
| # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR | |
| # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT | |
| # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, | |
| # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT | |
| # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, | |
| # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY | |
| # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT | |
| # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | |
| # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
| """ This file creates a barebones system and executes 'hello', a simple Hello | |
| World application. | |
| See Part 1, Chapter 2: Creating a simple configuration script in the | |
| learning_gem5 book for more information about this script. | |
| IMPORTANT: If you modify this file, it's likely that the Learning gem5 book | |
| also needs to be updated. For now, email Jason <power.jg@gmail.com> | |
| """ | |
| # import the m5 (gem5) library created when gem5 is built | |
| import m5 | |
| # import all of the SimObjects | |
| from m5.objects import * | |
| # create the system we are going to simulate | |
| system = System() | |
| # Set the clock fequency of the system (and all of its children) | |
| system.clk_domain = SrcClockDomain() | |
| system.clk_domain.clock = '1GHz' | |
| system.clk_domain.voltage_domain = VoltageDomain() | |
| # Set up the system | |
| system.mem_mode = 'timing' # Use timing accesses | |
| system.mem_ranges = [AddrRange('512MB')] # Create an address range | |
| # Create a simple CPU | |
| system.cpu = TimingSimpleCPU() | |
| # Create a memory bus, a system crossbar, in this case | |
| system.membus = SystemXBar() | |
| # Hook the CPU ports up to the membus | |
| system.cpu.icache_port = system.membus.cpu_side_ports | |
| system.cpu.dcache_port = system.membus.cpu_side_ports | |
| # create the interrupt controller for the CPU and connect to the membus | |
| system.cpu.createInterruptController() | |
| # For x86 only, make sure the interrupts are connected to the memory | |
| # Note: these are directly connected to the memory bus and are not cached | |
| if m5.defines.buildEnv['TARGET_ISA'] == "x86": | |
| system.cpu.interrupts[0].pio = system.membus.mem_side_ports | |
| system.cpu.interrupts[0].int_requestor = system.membus.cpu_side_ports | |
| system.cpu.interrupts[0].int_responder = system.membus.mem_side_ports | |
| # Create a DDR3 memory controller and connect it to the membus | |
| system.mem_ctrl = MemCtrl() | |
| system.mem_ctrl.dram = DDR3_1600_8x8() | |
| system.mem_ctrl.dram.range = system.mem_ranges[0] | |
| system.mem_ctrl.port = system.membus.mem_side_ports | |
| # Connect the system up to the membus | |
| system.system_port = system.membus.cpu_side_ports | |
| # get ISA for the binary to run. | |
| isa = str(m5.defines.buildEnv['TARGET_ISA']).lower() | |
| # Default to running 'hello', use the compiled ISA to find the binary | |
| # grab the specific path to the binary | |
| thispath = os.path.dirname(os.path.realpath(__file__)) | |
| binary = os.path.join(thispath, '../../../', | |
| 'tests/test-progs/hello/bin/', isa, 'linux/hello') | |
| system.workload = SEWorkload.init_compatible(binary) | |
| # Create a process for a simple "Hello World" application | |
| process = Process() | |
| # Set the command | |
| # cmd is a list which begins with the executable (like argv) | |
| process.cmd = [binary] | |
| # Set the cpu to use the process as its workload and create thread contexts | |
| system.cpu.workload = process | |
| system.cpu.createThreads() | |
| # set up the root SimObject and start the simulation | |
| root = Root(full_system = False, system = system) | |
| # instantiate all of the objects we've created above | |
| m5.instantiate() | |
| print("Beginning simulation!") | |
| exit_event = m5.simulate() | |
| print('Exiting @ tick %i because %s' % (m5.curTick(), exit_event.getCause())) |