# Copyright (c) 2016-2017, 2020-2022 Arm Limited
# All rights reserved.
#
# The license below extends only to copyright in the software and shall
# not be construed as granting a license to any other intellectual
# property including but not limited to intellectual property relating
# to a hardware implementation of the functionality of the software
# licensed hereunder.  You may use the software subject to the license
# terms below provided that you ensure that this notice is replicated
# unmodified and in its entirety in all distributions of the software,
# modified or unmodified, in source code or in binary form.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met: redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer;
# redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution;
# neither the name of the copyright holders nor the names of its
# contributors may be used to endorse or promote products derived from
# this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

import os
import m5
from m5.util import addToPath
from m5.objects import *
from m5.options import *
import argparse

m5.util.addToPath('../..')

from common import MemConfig
from common import ObjectList
from common import Options
from common import SysPaths
from common.cores.arm import O3_ARM_v7a, HPI
from ruby import Ruby

import devices


default_kernel = 'vmlinux.arm64'
default_disk = 'linaro-minimal-aarch64.img'
default_root_device = '/dev/vda1'


# Pre-defined CPU configurations.
cpu_types = {
    "noncaching" : NonCachingSimpleCPU,
    "minor" : MinorCPU,
    "hpi" : HPI.HPI,
    "o3" : O3_ARM_v7a.O3_ARM_v7a_3,
}

def create_cow_image(name):
    """Helper function to create a Copy-on-Write disk image"""
    image = CowDiskImage()
    image.child.image_file = SysPaths.disk(name)

    return image

def config_ruby(system, args):
    cpus = []
    for cluster in system.cpu_cluster:
        for cpu in cluster.cpus:
            cpus.append(cpu)

    Ruby.create_system(args, True, system, system.iobus,
                       system._dma_ports, system.realview.bootmem,
                       cpus)

    # Create a seperate clock domain for Ruby
    system.ruby.clk_domain = SrcClockDomain(
        clock = args.ruby_clock,
        voltage_domain = system.voltage_domain)

def create(args):
    ''' Create and configure the system object. '''

    if args.script and not os.path.isfile(args.script):
        print("Error: Bootscript %s does not exist" % args.script)
        sys.exit(1)

    cpu_class = cpu_types[args.cpu]
    mem_mode = cpu_class.memory_mode()

    system = devices.ArmRubySystem(args.mem_size,
                                   mem_mode=mem_mode,
                                   workload=ArmFsLinux(
                                       object_file=
                                       SysPaths.binary(args.kernel)),
                                   readfile=args.script)

    # Add CPU clusters to the system
    system.cpu_cluster = [
        devices.CpuCluster(system,
                           args.num_cpus,
                           args.cpu_freq, "1.0V",
                           cpu_class, None, None, None),
    ]

    # Add the PCI devices we need for this system. The base system
    # doesn't have any PCI devices by default since they are assumed
    # to be added by the configuration scripts needing them.
    system.pci_devices = [
        # Create a VirtIO block device for the system's boot
        # disk. Attach the disk image using gem5's Copy-on-Write
        # functionality to avoid writing changes to the stored copy of
        # the disk image.
        PciVirtIO(vio=VirtIOBlock(image=create_cow_image(args.disk_image))),
    ]

    # Attach the PCI devices to the system. The helper method in the
    # system assigns a unique PCI bus ID to each of the devices and
    # connects them to the IO bus.
    for dev in system.pci_devices:
        system.attach_pci(dev)

    config_ruby(system, args)

    # Wire up the system's memory system
    system.connect()

    # Setup gem5's minimal Linux boot loader.
    system.realview.setupBootLoader(system, SysPaths.binary)

    if args.dtb:
        system.workload.dtb_filename = args.dtb
    else:
        # No DTB specified: autogenerate DTB
        system.workload.dtb_filename = \
            os.path.join(m5.options.outdir, 'system.dtb')
        system.generateDtb(system.workload.dtb_filename)

    # Linux boot command flags
    kernel_cmd = [
        # Tell Linux to use the simulated serial port as a console
        "console=ttyAMA0",
        # Hard-code timi
        "lpj=19988480",
        # Disable address space randomisation to get a consistent
        # memory layout.
        "norandmaps",
        # Tell Linux where to find the root disk image.
        "root=%s" % args.root_device,
        # Mount the root disk read-write by default.
        "rw",
        # Tell Linux about the amount of physical memory present.
        "mem=%s" % args.mem_size,
    ]
    system.workload.command_line = " ".join(kernel_cmd)

    return system


def run(args):
    cptdir = m5.options.outdir
    if args.checkpoint:
        print("Checkpoint directory: %s" % cptdir)

    while True:
        event = m5.simulate()
        exit_msg = event.getCause()
        if exit_msg == "checkpoint":
            print("Dropping checkpoint at tick %d" % m5.curTick())
            cpt_dir = os.path.join(m5.options.outdir, "cpt.%d" % m5.curTick())
            m5.checkpoint(os.path.join(cpt_dir))
            print("Checkpoint done.")
        else:
            print(exit_msg, " @ ", m5.curTick())
            break

    sys.exit(event.getCode())


def main():
    parser = argparse.ArgumentParser()

    parser.add_argument("--dtb", type=str, default=None,
                        help="DTB file to load")
    parser.add_argument("--kernel", type=str, default=default_kernel,
                        help="Linux kernel")
    parser.add_argument("--disk-image", type=str,
                        default=default_disk,
                        help="Disk to instantiate")
    parser.add_argument("--root-device", type=str,
                        default=default_root_device,
                        help="OS device name for root partition (default: {})"
                             .format(default_root_device))
    parser.add_argument("--script", type=str, default="",
                        help = "Linux bootscript")
    parser.add_argument("--cpu", choices=list(cpu_types.keys()),
                        default="minor",
                        help="CPU model to use")
    parser.add_argument("--cpu-freq", type=str, default="4GHz")
    parser.add_argument("-n", "--num-cpus", type=int, default=1)
    parser.add_argument("--checkpoint", action="store_true")
    parser.add_argument("--restore", type=str, default=None)

    parser.add_argument("--mem-type", default="DDR3_1600_8x8",
                        choices=ObjectList.mem_list.get_names(),
                        help = "type of memory to use")
    parser.add_argument("--mem-channels", type=int, default=1,
                        help = "number of memory channels")
    parser.add_argument("--mem-ranks", type=int, default=None,
                        help = "number of memory ranks per channel")
    parser.add_argument(
        "--mem-size", action="store", type=str, default="2GiB",
        help="Specify the physical memory size (single memory)")
    parser.add_argument("--enable-dram-powerdown", action="store_true",
                        help="Enable low-power states in DRAMInterface")
    parser.add_argument("--mem-channels-intlv", type=int, default=0,
                        help="Memory channels interleave")

    parser.add_argument("--num-dirs", type=int, default=1)
    parser.add_argument("--num-l2caches", type=int, default=1)
    parser.add_argument("--num-l3caches", type=int, default=1)
    parser.add_argument("--l1d_size", type=str, default="64kB")
    parser.add_argument("--l1i_size", type=str, default="32kB")
    parser.add_argument("--l2_size", type=str, default="2MB")
    parser.add_argument("--l3_size", type=str, default="16MB")
    parser.add_argument("--l1d_assoc", type=int, default=2)
    parser.add_argument("--l1i_assoc", type=int, default=2)
    parser.add_argument("--l2_assoc", type=int, default=8)
    parser.add_argument("--l3_assoc", type=int, default=16)
    parser.add_argument("--cacheline_size", type=int, default=64)

    Ruby.define_options(parser)
    args = parser.parse_args()

    root = Root(full_system=True)
    root.system = create(args)

    if args.restore is not None:
        m5.instantiate(args.restore)
    else:
        m5.instantiate()

    run(args)


if __name__ == "__m5_main__":
    main()